 | Monter d'un niveau |
Abbott, R., Abbott, T. D., Acernese, F., Ackley, K., Adams, C., Adhikari, N., Adhikari, R. X., Adya, V. B., Affeldt, C., Agarwal, D., Agathos, M., Agatsuma, K., Aggarwal, N., Aguiar, O. D., Aiello, L., Ain, A., Ajith, P., Akutsu, T., Albanesi, S., ... Zweizig, J. (2021). Search for intermediate-mass black hole binaries in the third observing run of Advanced LIGO and Advanced Virgo. Astronomy and Astrophysics, 659, A84 (25 pages). Lien externe
Binet, F., Saunier, F., & Margni, M. (2021). Assessing the mitigation potential of environmental impacts from circular economy strategies on an industrial sector and its value chain: a case study on the steel value chain in Quebec. Frontiers in Sustainability, 2, 738890 (14 pages). Disponible
Bonarens, M., Greiner, R., Votsmeier, M., & Vidal, D. (2021). Towards a polydisperse packed bed filtration model as a surrogate model for particulate filters. Journal of Aerosol Science, 160, 105900. Disponible
Brunette, J., & Bazergui, A. (2021). Spinal Biomechanics Concepts of Pediatric Scoliosis and Trunk Shift Applied to Daily Tasks and Sports. Journal of Musculoskeletal Disorders and Treatment, 7(4), 13 pages. Disponible
Chauvette, J.-F., Brzeski, D., Hia, I. L., Farahani, R. D., Piccirelli, N., & Therriault, D. (2021). High-speed multinozzle additive manufacturing and extrusion modeling of large-scale microscaffold networks. Additive Manufacturing, 47, 102294 (11 pages). Disponible
Chockalingam, A., Tyagi, V., Krishnan, R.G., Khan, S.S., Anbil Parthipan, S. C., Beg, M.F., Mahajan, V., Patel, P., Mullapudi, S.T., Thakkar, N., Bhasin, A. A., Tyagi, A., Ye, B., & Mihailidis, A. (2021). Artificial intelligence and its contribution to overcome COVID-19. International Journal of Noncommunicable Diseases, 6(Suppl 1), S8-S18. Lien externe
Del Giudice, L., Wróbel, R. J., Katsamakas, A., Leinenbach, C., & Vassiliou, M. F. (2021). Physical modelling of reinforced concrete at a 1:40 scale using additively manufactured reinforcement cages. Earthquake Engineering & Structural Dynamics, 51(3), 537-551. Lien externe
Fiorentino, M., Thibeault, C., & Savaria, Y. (2021). Introducing KeyRing self‐timed microarchitecture and timing‐driven design flow. IET Computers & Digital Techniques, 15(6), 409-426. Disponible
Haider, A., Adnan Khan, M., Rehman, A., Rahman, M.U., & Seok Kim, H. (2021). A Real-Time Sequential Deep Extreme Learning Machine Cybersecurity Intrusion Detection System. Computers, Materials & Continua, 66(2), 1785-1798. Disponible
Hung, C. R., Völler, S., Agez, M., Majeau-Bettez, G., & Strømman, A. H. (2021). Regionalized climate footprints of battery electric vehicles in Europe. Journal of Cleaner Production, 322, 129052. Disponible
Jella, S., Bourque, G., Gauthier, P., Versailles, P., Bergthorson, J., Park, J.-W., Lu, T., Panigrahy, S., & Curran, H. (2021). Analysis of auto-ignition chemistry in aeroderivative premixers at engine conditions. Journal of Engineering for Gas Turbines and Power, 143(11), GTP-20-178 (10 pages). Disponible
Katsamakas, A., Belser, G., Vassiliou, M. F., & Blondet, M. (2021). Experimental investigation of a spherical rubber isolator for use in low income countries. Engineering Structures, 250, 113522 (15 pages). Lien externe
Khashaypoor, M., Nunes da Silva, F., & Mamdoohi, A. R. (2021). Strategic choices impact on urban mobility improvement: A Case study of Tehran. Journal of Sustainable Development of Transport and Logistics, 6(2), 109-123. Lien externe
Liao, L., Chen, J., Li, H., Zeng, Y., Shang, W., Sporea, C., Toma, A., & Sajedi, S. (2021). Locating performance regression root causes in the field operations of web-based systems: an experience report. IEEE Transactions on Software Engineering, 48(12), 4986-5006. Lien externe
Maier, O., Baete, S. H., Fyrdahl, A., Hammernik, K., Harrevelt, S., Kasper, L., Karakuzu, A., Loecher, M., Patzig, F., Tian, Y., Wang, K., Gallichan, D., Uecker, M., & Knöll, F. (2021). CG-SENSE revisited: results from the first ISMRM reproducibility challenge. Magnetic Resonance in Medicine, 85(4), 1821-1839. Lien externe
Mancini, M., Tian, Q., Fan, Q., Cercignani, M., & Huang, S. Y. (2021). Dissecting whole-brain conduction delays through MRI microstructural measures. Brain Structure and Function, 226(8), 2651-2663. Disponible
Parenteau, M., & Laurendeau, É. (2021). A transonic, viscous nonlinear frequency domain Vortex Lattice Method for aeroelastic analyses. Journal of Fluids and Structures, 107, 103406 (26 pages). Lien externe
Potaufeux, J.-E., Odent, J., Notta-Cuvier, D., Barrau, S., Magnani, C., Delille, R., Zhang, C., Liu, G., Giannelis, E. P., Müller, A. J., Lauro, F., & Raquez, J.-M. (2021). Mastering Superior Performance Origins of Ionic Polyurethane/Silica Hybrids. ACS Applied Polymer Materials, 3(12), 6684-6693. Lien externe
Rafiee, M., Granier, F., & Therriault, D. (2021). Advances in coaxial additive manufacturing and applications. Advanced Materials Technologies, 6(11), 2100356. Disponible
Randel, R., Aloise, D., Blanchard, S. J., & Hertz, A. (2021). A Lagrangian-based score for assessing the quality of pairwise constraints in semi-supervised clustering. Data Mining and Knowledge Discovery, 35(6), 2341-2368. Disponible
Tangestani, R., Sabiston, T., Chakraborty, A., Muhammad, W., Lang, Y., & Martin, É. (2021). An Efficient Track-Scale Model for Laser Powder Bed Fusion Additive Manufacturing: Part 1- Thermal Model. Frontiers in Materials, 8, 753040 (14 pages). Disponible
Van de Voorde, B., Katalagarianakis, A., Huysman, S., Toncheva, A., Raquez, J.-M., Ðuretek, I., Holzer, C., Cardon, L., Bernaerts, K. V., Van Hemelrijck, D., Pyl, L., & Van Vlierberghe, S. (2021). Effect of extrusion and fused filament fabrication processing parameters of recycled poly(ethylene terephthalate) on the crystallinity and mechanical properties. Additive manufacturing, 50, 102518 (14 pages). Lien externe
Wang, L., Patskovsky, S., Gauthier-Soumis, B., & Meunier, M. (2021). Porous Au–Ag nanoparticles from galvanic replacement applied as single‐particle SERS probe for quantitative monitoring. Small, 18(1), 2105209 (13 pages). Lien externe
