Documents dont l'auteur est "Birglen, Lionel"

Monter d'un niveau

Lionel BirglenDépartement de génie mécanique

Voir sa fiche dans le Répertoire des Expertises de Polytechnique Montréal

Grouper par: Auteurs ou autrices | Date de publication | Sous-type de document | Aucun groupement

Nombre de documents: 109

Shan, X., & Birglen, L. (2024). Bistable Stopper Design and Force Prediction for Precision and Power Grasps of Soft Robotic Fingers for Industrial Manipulation. Journal of Mechanical Design, 146(4), MD-23-1495 (10 pages). Lien externe

Chapdelaine, B., Celce, M., Vidal, C., Birglen, L., & Monsarrat, B. (mai 2024). Simulation and Experimental Validation of an Autonomous Perching and Takeoff Method for a Multirotor UAV on Vertical Surfaces using a Suction Cup [Communication écrite]. 2024 IEEE International Conference on Robotics and Automation (ICRA 2024), Yokohama, Japan. Lien externe

Bastien, J., & Birglen, L. (2023). Variable stiffness soft robotic fingers using snap-fit kinematic reconfiguration. IEEE Transactions on Robotics, 39(6), 14 pages. Lien externe

Bastien, J., & Birglen, L. (2023). Power Efficient Design a Compliant Robotic Leg Based on Klann's Linkage. IEEE/ASME Transactions on Mechatronics, 28(2), 814-824. Lien externe

Maghami, A., Imbert, A., Côté, G., Monsarrat, B., Birglen, L., & Khoshdarregi, M. (2023). Calibration of Multi-Robot Cooperative Systems Using Deep Neural Networks. Journal of Intelligent & Robotic Systems, 107(4), 14 pages. Lien externe

Arslan, M., & Birglen, L. (juin 2023). Design, control, and experiments of a low-cost open-source planar cable-driven parallel robot [Communication écrite]. CCToMM Mechanisms, Machines and Mechatronics (M3) Symposium, Québec, Canada (15 pages). Lien externe

Li, M., Belzile, B., Imran, A., Birglen, L., Beltrame, G., & St-Onge, D. (août 2023). From Assistive Devices to Manufacturing Cobot Swarms [Communication écrite]. 32nd IEEE International Conference on Robot and Human Interactive Communication (RO-MAN 2023), Busan, Republic of Korea. Lien externe

Birglen, L., & Hely, C. (novembre 2023). Kinematic Analysis of a Biocompatible Lower Limb Model [Communication écrite]. 16th International Federation of Theory of Machines and Mechanisms World Congress (IFToMM WC 2023), Tokyo, Japan. Lien externe

Massin, J., & Birglen, L. (mai 2022). Analysis of the Walking Chair from Tokyo Institute of Technology with Screw Theory [Communication écrite]. 2nd USCToMM Symposium on Mechanical Systems and Robotics (USCToMM MSR 2022), Rapid City, SD. Lien externe

Mouaze, N., & Birglen, L. (2022). Bistable compliant underactuated gripper for the gentle grasp of soft objects. Mechanism and Machine Theory, 170, 104676 (17 pages). Lien externe

Birglen, L. (2021). Mécatronique : cours avec exercices corrigés. (3e éd.). Lien externe

Taha, H. A., Yacout, S., & Birglen, L. (novembre 2020). Detection and Monitoring for Anomalies and Degradation of a Robotic Arm Using Machine Learning [Communication écrite]. Stuttgart Conference on Automative Production (SCAP 2020). Lien externe

Nassar, F., & Birglen, L. (2021). Force analysis of minimal self-adaptive fingers using variations of four-bar linkages. Mechanical Sciences, 12(2), 1037-1049. Lien externe

Sion, A., Birglen, L., & Wouwer, A. V. (juin 2021). Gait simulation of an hexapodal robot walking across various terrains [Communication écrite]. CCToMM Symposium on Mechanisms, Machines, and Mechatronics (CCToMM M3 2020). Lien externe

Mouazé, N., Nguyen, T., & Birglen, L. (2021). Non-cylindrical wrapping rods and compliant adapters for multi-mode twisting string actuation. International Journal of Mechanisms and Robotic Systems, 5(1-2), 93-110. Lien externe

Mouazé, N., & Birglen, L. (juin 2021). Point-spring modeling of the grasp of a deformable object by an angular gripper [Communication écrite]. CCToMM Mechanisms, Machines and Mechatronics (M3) Symposium (12 pages). Lien externe

Farzanehkaloorazi, M.H., Bonev, I. A., & Birglen, L. (2021). Simultaneous task placement and sequence optimization in an inspection robotic cell. Robotica, 39(12), 2110-2130. Lien externe

Mouazé, N., & Birglen, L. (2020). Deformation Modeling of Compliant Robotic Fingers Grasping Soft Objects. Journal of Mechanisms and Robotics, 13(1), 11 pages. Lien externe

Shan, X., & Birglen, L. (2020). Modeling and analysis of soft robotic fingers using the fin ray effect. International Journal of Robotics Research, 39(14), 1686-1705. Lien externe

Mouazé, N., & Birglen, L. (2020). Preliminary Design of a Revolute to Prismatic Morphing Compliant Joint. Transactions of the Canadian Society for Mechanical Engineering, 44(4), 481-491. Lien externe

Taha, H., Yacout, S., & Birglen, L. (novembre 2020). Robotic arms anomalies and degradation monitoring and detection by using machine learning [Communication écrite]. Stuttgart Conference on the Automotive Production (SCAP 2020). Non disponible

Mouazé, N., Nguyen, T., & Birglen, L. (mai 2020). Twisting string actuation with noncircular wrapping rods [Communication écrite]. USCToMM Symposium on Mechanical Systems & Robotics (MSR 2020), Rapid City, SD, USA. Lien externe

Birglen, L. (2019). Design of a partially-coupled self-adaptive robotic finger optimized for collaborative robots. Autonomous Robots, 43(2), 523-538. Disponible

Birglen, L., & Gouttefarde, M. (mai 2019). Comparison of redundancy resolution methods for a cable-suspended spatial parallel robot [Comparaison de méthodes de résolution de la redondance d'un robot parallèle spatial suspendu à câbles]. [Communication écrite]. CCToMM Mechanisms, Machines, and Mechatronics Symposium (M3 2019), Montréal, Qc, Canada (12 pages). Lien externe

Fedorov, D., & Birglen, L. (2019). Design of a Compliant Mechanical Device for Upper Leg Rehabilitation. IEEE Robotics and Automation Letters, 4(2), 870-877. Lien externe

Mouazé, N., & Birglen, L. (mai 2019). Preliminary design of a revolute to prismatic morphing compliant join [Communication écrite]. CCToMM Mechanisms, Machines and Mechatronics Symposium (M3 2019), Montréal, Qc, Canada (11 pages). Non disponible

Mouazé, N., & Birglen, L. (mai 2019). Preliminary Design of a Revolute to Prismatic Morphing Compliant Joint [Conception préliminaire d’une articulation rotoide compliante changeant en une liaison prismatique]. [Communication écrite]. CCToMM Mechanisms, Machines and Mechatronics (M3) Symposium, Montréal, Canada (11 pages). Lien externe

Birglen, L., & Gouttefarde, M. (juin 2019). Stiffness of planar 2-DOF 3-differential cable-driven parallel robots [Communication écrite]. 4th International Conference on Cable-Driven Parallel Robots, Krakow, Poland. Lien externe

Fedorov, D., & Birglen, L. (2018). Differential noncircular pulleys for cable robots and static balancing. Journal of Mechanisms and Robotics, 10(6), 1-8. Disponible

Fedorov, D., & Birglen, L. (2018). Geometric optimization of a self-adaptive robotic leg. Transactions of the Canadian Society for Mechanical Engineering, 42(1), 49-60. Disponible

Belzile, B., & Birglen, L. (2018). Practical considerations on proprioceptive tactile sensing for underactuated fingers. Transactions of the Canadian Society for Mechanical Engineering, 42(1), 71-79. Disponible

Mouazé, N., & Birglen, L. (août 2018). Deformation Analysis of a Compliant Underactuated Finger Grasping a Soft Object [Communication écrite]. ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Québec, Québec. Lien externe

Fedorov, D., & Birglen, L. (août 2018). Kinematic and potential energy analysis of self-adaptive robotic legs [Communication écrite]. ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC/CIE 2018), Québec, Québec. Lien externe

Birglen, L. (2018). Mécatronique : cours avec exercices corrigés. (2e éd.). Non disponible

FarzanehKaloorazi, M. H., Bonev, I. A., & Birglen, L. (août 2018). Parameters identification of the path placement optimization problem for a redundant coordinated robotic workcell [Communication écrite]. ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, (IDETC/CIE 2018), Québec, Québec. Lien externe

FarzanehKaloorazi, M.H., Bonev, I. A., & Birglen, L. (2018). Simultaneous path placement and trajectory planning optimization for a redundant coordinated robotic workcell. Mechanism and Machine Theory, 130, 346-362. Lien externe

Birglen, L., & Schlicht, T. (2018). A statistical review of industrial robotic grippers. Robotics and Computer-Integrated Manufacturing, 49, 88-97. Lien externe

Birglen, L. (juillet 2017). Design of a partially-coupled self-adaptive robotic finger optimized for collaborative robots [Communication écrite]. Robotics: Science and Systems (RSS 2017), Cambridge, MA. Lien externe

Fedorov, D., & Birglen, L. (2017). Design of a Self-Adaptive Robotic Leg Using a Triggered Compliant Element. IEEE Robotics and Automation Letters, 2(3), 1444-1451. Lien externe

Hély, C., Birglen, L., & Xie, W.-F. (2017). Feasibility study of robotic fibre placement on intersecting multi-axial revolution surfaces. Robotics and Computer-Integrated Manufacturing, 48, 73-79. Lien externe

Birglen, L., & Fedorov, D. (mai 2017). Geometric optimization of a self-adaptive robotic leg [Communication écrite]. CCToMM Symposium on Mechanisms, Machines, and Mechatronics, Montréal, Québec (12 pages). Lien externe

Birglen, L. (2017). Mechanical finger for grasping apparatus. (Demande de brevet no US20170252930). Lien externe

Belzile, B., & Birglen, L. (2017). Optimal design of self-adaptive fingers for proprioceptive tactile sensing. Journal of Mechanisms and Robotics-Transactions of the Asme, 9(5), 11 pages. Lien externe

Boucher, J.-M., & Birglen, L. (2017). Performance augmentation of underactuated fingers' grasps using multiple drive actuation. Journal of Mechanisms and Robotics, 9(4), 10 pages. Lien externe

Birglen, L., & Belzile, B. (mai 2017). Practical consideration on proprioreceptive tactile sensing for underactuated fingers [Communication écrite]. CCToMM Symposium on Mechanisms, Machines, and Mechatronics, Montréal, Québec. Lien externe

Belzile, B., & Birglen, L. (mai 2017). Practical Considerations on Proprioceptive Tactile Sensing for Underactuated Fingers [Considérations pratiques sur la mesure tactile proprioceptive pour des doigts sous-actionnés]. [Communication écrite]. CCToMM Mechanisms, Machines and Mechatronics (M3) Symposium, Montréal, Canada (12 pages). Lien externe

Birglen, L. (2016). Mécatronique : cours avec exercices corrigés. Non disponible

Stavenuiter, R. A. J., Birglen, L., & Herder, J. L. (2016). A planar underactuated grasper with adjustable compliance. Mechanism and Machine Theory, 12, 295-306. Lien externe

Belzile, B., & Birglen, L. (2016). Stiffness analysis of underactuated fingers and its application to proprioceptive tactile sensing. IEEE/ASME Transactions on Mechatronics, 21(6), 2672-2681. Lien externe

Dubois, P.-O., & Birglen, L. (août 2015). Analysis and design of a remote center compliance universal joint [Communication écrite]. ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Boston, Massachusetts, USA (10 pages). Lien externe

Fedorov, D., & Birglen, L. (août 2015). Analysis and design of a two degree of freedom Hoeckens-pantograph leg mechanism [Communication écrite]. ASME International Design Engineering Technical Conferences and Computers and Information In Engineering Conference (DETC 2015), Boston, Massachusetts, USA (9 pages). Lien externe

Khakpour, H., Birglen, L., & Tahan, S.-A. (2015). Analysis and optimization of a new differentially driven cable parallel robot. Journal of Mechanisms and Robotics, 7(3). Lien externe

Zheng, J., Xie, W. F., Viens, M., Birglen, L., & Mantegh, I. (2015). Design of an advanced automatic inspection system for aircraft parts based on fluorescent penetrant inspection analysis. Insight: Non-Destructive Testing and Condition Monitoring, 57(1), 18-24 and 34-18-24 and 34. Lien externe

Birglen, L. (septembre 2015). Enhancing versatility and safety of industrial grippers with adaptive robotic fingers [Communication écrite]. IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2015), Hamburg, Germany. Lien externe

Khakpour, H., Tahan, S.-A., Sabourin, M., Beaulieu, S., & Birglen, L. (août 2015). Experimental study on abrasive Waterjet method to polish hydraulic turbines [Communication écrite]. 3rd International Conference on Manufacturing Engineering and Technology for Manufacturing Growth (METMG 2015), Vancouver, Canada. Non disponible

Belzile, B., & Birglen, L. (août 2015). Instantaneous-Stiffness Plane Analysis of Underactuated Fingers [Communication écrite]. ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Boston, Massachusetts, USA (10 pages). Lien externe

Carmona, J.-P., Birglen, L., Chaussée, J., Dervault, F., Deshaies, M., Boileau, E., & Turenne, S. (mai 2015). Topology optimization of a flap track support for additive manufacturing [Communication écrite]. 62nd CASI Aeronautics Conference and AGM 3rd GARDN Conference, Montréal, Québec. Non disponible

Boucher, J.-M., & Birglen, L. (août 2015). Underactuated Finger Closing Motion Control Using Dual Drive Actuation [Communication écrite]. ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Boston, Massachusetts, USA (10 pages). Lien externe

Khakpour, H., Birglen, L., & Tahan, S.-A. (2015). Uniform scanning path generation for abrasive waterjet polishing of free-form surfaces modeled by triangulated meshes. International Journal of Advanced Manufacturing Technology, 77(5-8), 1167-1176. Lien externe

Khakpour, H., Birglen, L., Tahan, A., & Paquet, F. (septembre 2014). Experimental study on abrasive waterjet polishing of hydraulic turbine blades [Communication écrite]. 27th IAHR Symposium on Hydraulic Machinery and Systems (IAHR 2014), Montréal, Québec (10 pages). Disponible

Birglen, L., & Ruella, C. (2014). Analysis and optimization of one-degree of freedom robotic legs. Journal of Mechanisms and Robotics, 6(4), 041004-041004. Lien externe

Belzile, B., & Birglen, L. (2014). A compliant self-adaptive gripper with proprioceptive haptic feedback. Autonomous Robots, 36(1-2), 79-91. Lien externe

Olivieri, P., Birglen, L., Maldague, X., & Mantegh, I. (2014). Coverage path planning for eddy current inspection on complex aeronautical parts. Robotics and Computer-Integrated Manufacturing, 30(3), 305-314. Lien externe

Mohebbi, A., Baron, L., Achiche, S., & Birglen, L. (novembre 2014). Fuzzy decision making for conceptual design of a visual servoing system using mechatronic multi-criteria profile (MMP) [Communication écrite]. ASME 2014 International Mechanical Engineering Congress & Exposition (IMECE 2014), Montréal, Québec (10 pages). Lien externe

Mohebbi, A., Baron, L., Achiche, S., & Birglen, L. (août 2014). Neural network-based decision support for conceptual design of a mechatronic system using mechatronic multi-criteria profile (MMP) [Communication écrite]. 2014 International Conference on Innovative Design and Manufacturing (ICIDM 2014), Montréal, Québec. Lien externe

Olivieri, P., Birglen, L., Maldague, X., & Mantegh, I. (2014). Path planning for eddy current inspection around probable defects. Canadian Aeronautics and Space Journal, 60(3), 49-57. Lien externe

Birglen, L. (2014). Self-adaptive mechanical finger and method. (Brevet no US8720964). Lien externe

Belzile, B., & Birglen, L. (mai 2014). Stiffness analysis of double tendon underactuated fingers [Communication écrite]. IEEE International Conference on Robotics and Automation (ICRA 2014), Hong Kong, China. Lien externe

Khakpour, H., Birglen, L., & Tahan, S.-A. (2014). Synthesis of differentially driven planar cable parallel manipulators. IEEE Transactions on Robotics, 30(3), 619-630. Lien externe

Mohebbi, A., Baron, L., Achiche, S., & Birglen, L. (août 2014). Trends in concurrent, multi-criteria and optimal design of mechatronic systems: A review [Communication écrite]. 2014 International Conference on Innovative Design and Manufacturing (ICIDM 2014), Montréal, Québec. Lien externe

Khakpour, H., & Birglen, L. (septembre 2014). Workspace augmentation of spatial 3-DOF cable parallel robots using differential actuation [Communication écrite]. IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2014), Chicago, IL, United states. Lien externe

Larouche, L.-A., & Birglen, L. (2013). Assisted design of linkage-driven adaptive soft fingers. Industrial Robot, 40(4), 337-346. Lien externe

Xu, B., Xie, W.-, Viens, M., Mohseni E., E., Birglen, L., & Mantegh, I. (octobre 2013). Intelligent Eddy curent crack detection system design based on neuro-fuzzy logic [Communication écrite]. International Workshop on Smart Materials and Smart Structures, Calgary, Alberta, Canada. Non disponible

Khakpour, H., & Birglen, L. (2013). Numerical analysis of the grasp configuration of a planar 3-DOF linkage-driven underactuated finger. Journal of Computational and Nonlinear Dynamics, 8(2). Lien externe

Olivieri, P., & Birglen, L. (avril 2013). Path planning for Eddy current inspection around probable defects [Communication écrite]. 60th CASI Aeronautics Conference and AGM Aerospace Clusters (AERO 2013), Toronto, Ontario. Non disponible

Birglen, L., & Ruella, C. (août 2013). Traversability analysis of a novel one-DOF robotic leg [Communication écrite]. ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Portland, OR, USA. Lien externe

Zheng, J., Xie, W.-F., Viens, M., Birglen, L., & Mantegh, I. (juillet 2012). Design of advanced automatic inspection system for turbine blade FPI analysis [Communication écrite]. 39th Annual Review of Progress in Quantitative Nondestructive Evaluation, Denver, Colorado, USA. Lien externe

Birglen, L. (2011). The kinematic preshaping of triggered self-adaptive linkage-driven robotic fingers. Mechanical Sciences, 2(1), 41-49. Disponible

Larouche, L.-A., & Birglen, L. (août 2010). Design and first experiments with a new underactuated finger [Communication écrite]. ASME/IFToMM International Workshop on Underactuated Grasping, Montréal, Québec. Non disponible

Birglen, L. (2010). From flapping wings to underactuated fingers and beyond: a broad look to self-adaptive mechanisms. Mechanical Sciences, 1(1), 5-12. Disponible

Birglen, L. (août 2010). The kinematic preshaping of triggered self-adaptive linkage-driven robotic fingers [Communication écrite]. ASME/IFToMM International Workshop on Underactuated Grasping, Montréal, Québec. Non disponible

Qin, Z., Baron, L., & Birglen, L. (2010). A new approach to the dynamic parameter identification of robotic manipulators. Robotica, 28(4), 539-547. Lien externe

Birglen, L., & Herbecq, F. (août 2009). Self-adaptive compliant grippers capable of pinch preshaping [Communication écrite]. ASME International Design Engineering Technical Conferences and Computers and Information In Engineering Conference (DETC 2009), San Diego, CA. Lien externe

Bres, A., Monsarrat, B., Dubourg, L., Birglen, L., Perron, C., Jahazi, M., & Baron, L. (2010). Simulation of friction stir welding using industrial robots. Industrial Robot, 37(1), 36-50. Lien externe

Doria, M., & Birglen, L. (2009). Design of an underactuated compliant gripper for surgery using nitinol. Journal of Medical Devices, 3(1), 011007-011007. Lien externe

Qin, Z., Baron, L., & Birglen, L. (2009). Robust design of inertial measurement units based on accelerometers. Journal of Dynamic Systems, Measurement and Control, 131(3), 031010-031010. Lien externe

Birglen, L. (2009). Type synthesis of linkage-driven self-adaptive fingers. Journal of Mechanisms and Robotics, 1(2), 021010-021010. Lien externe

Birglen, L., Laliberté, T., & Gosselin, C. (2008). Design and Control of the Laval Underactuated Hands. Dans Underactuated Robotic Hands (Vol. 40, p. 171-207). Lien externe

Doria, M., & Birglen, L. (octobre 2008). Design of an underactuated compliant gripper for surgery using Nitinol [Communication écrite]. CEIMEXCAN 2008, Montréal, Québec. Non disponible

Birglen, L., Laliberté, T., & Gosselin, C. (2008). Grasp Stability of Underactuated Fingers. Dans Underactuated Robotic Hands (Vol. 40, p. 61-115). Lien externe

Birglen, L., Laliberté, T., & Gosselin, C. (2008). Grasping vs. Manipulating. Dans Underactuated Robotic Hands (Vol. 40, p. 7-31). Lien externe

Qin, Z., Ren, Q., Baron, L., Balazinski, M., & Birglen, L. (mai 2008). Joint friction identification for robots using TSK fuzzy system based on subtractive clustering [Communication écrite]. Annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2008), New York City, NY, United States. Lien externe

Birglen, L., Laliberté, T., & Gosselin, C. (2008). Kinetostatic Analysis of Robotic Fingers. Dans Underactuated Robotic Hands (Vol. 40, p. 33-60). Lien externe

Birglen, L., Laliberté, T., & Gosselin, C. (2008). Optimal Design of Underactuated Fingers. Dans Underactuated Robotic Hands (Vol. 40, p. 117-138). Lien externe

Birglen, L., Laliberté, T., & Gosselin, C. (2008). Underactuated robotic hands. Lien externe

Birglen, L., Laliberté, T., & Gosselin, C. (2008). Underactuation between the fingers. Dans Underactuated Robotic Hands (Vol. 40, p. 139-169). Lien externe

Ren, Q., Qin, Z., Baron, L., Birglen, L., & Balazinski, M. (juin 2007). Identification of rigid-body dynamics of robotic manipulators using type-2 fuzzy logic filter [Communication écrite]. Annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2007), San Diego, CA, United States. Lien externe

Birglen, L., & Gosselin, C. M. (2006). Force Analysis of Connected Differential Mechanisms: Application to Grasping. International Journal of Robotics Research, 25(10), 1033-1046. Lien externe

Birglen, L., & Gosselin, C. M. (2006). Geometric Design of Three-Phalanx Underactuated Fingers. Journal of Mechanical Design, 128(2), 356-364. Lien externe

Birglen, L., & Gosselin, C. M. (2006). Grasp-State Plane Analysis of Two-Phalanx Underactuated Fingers. Mechanism and Machine Theory, 41(7), 807-822. Lien externe

Birglen, L. (septembre 2006). An introduction to the analysis of linkage-driven compliant underactuated fingers [Communication écrite]. ASME International Design Engineering Technical Conferences and Computers and Information In Engineering Conference (DETC 2006), Philadelphia, PA, United States (9 pages). Lien externe

Birglen, L., & Gosselin, C. M. (septembre 2006). Optimally unstable underactuated gripper: Synthesis and applications [Communication écrite]. ASME International Design Engineering Technical Conferences and Computers and Information In Engineering Conference (DETC 2006), Philadelphia, PA, United States. Lien externe

Birglen, L., & Gosselin, C. M. (avril 2005). Fuzzy Enhanced Control of an Underactuated Finger Using Tactile and Position Sensors [Communication écrite]. IEEE International Conference on Robotics and Automation (ICRA 2005), Barcelona, Spain. Lien externe

Birglen, L. (2004). Analysis and control of underactuated robotic hands [Thèse de doctorat, Université Laval]. Non disponible

Birglen, L., & Gosselin, C. M. (2004). Kinetostatic analysis of underactuated fingers. IEEE Transactions on Robotics and Automation, 20(2), 211-221. Lien externe

Birglen, L., & Gosselin, C. (juillet 2004). Optimal design of 2-phalanx underactuated fingers [Communication écrite]. International Conference on Intelligent Manipulation and Grasping, Genova, Italy. Non disponible

Birglen, L., & Gosselin, C. M. (septembre 2003). On the force capability of underactuated fingers [Communication écrite]. IEEE International Conference on Robotics and Automation (ICRA 2003), Taipei, Taiwan. Lien externe

Birglen, L., Gosselin, C., Pouliot, N., Monsarrat, B., & Laliberte, T. (2002). SHaDe, a new 3-DOF haptic device. IEEE Transactions on Robotics and Automation, 18(2), 166-175. Lien externe

Laliberté, T., Birglen, L., & Gosselin, C. M. (2002). Underactuation in robotic grasping hands. Machine Intelligence & Robotic Control, 4(3), 11 pages. Non disponible

Liste produite: Tue Nov 19 04:50:20 2024 EST.

Pour citer ou exporter	Atom RSS 1.0 RSS 2.0

Documents dont l'auteur est "Birglen, Lionel"

Aide