 | Monter d'un niveau |
Abrignani, M. D., Giupponi, L., Lodi, A., & Verdone, R. (2018). Scheduling M2M traffic over LTE uplink of a dense small cell network. EURASIP Journal on Wireless Communications and Networking, 2018(1). Disponible
Adrien Rimélé, M., Dimitrakopoulos, R., & Gamache, M. (2018). A stochastic optimization method with in-pit waste and tailings disposal for open pit life-of-mine production planning. Resources, 57, 112-121. Disponible
Ahabchane, C., Trépanier, M., & Langevin, A. (2018). Street-segment-based salt and abrasive prediction for Winter maintenance using machine learning and GIS. Transactions in GIS, 23(1), 48-69. Lien externe
Amaioua, N., Audet, C., Conn, A. R., & Le Digabel, S. (2018). Efficient solution of quadratically constrained quadratic subproblems within the mesh adaptive direct search algorithm. European Journal of Operational Research, 268(1), 13-24. Lien externe
Anjos, M. F., & Deza, A. (2018). Paths, pivots, and practice: the power of optimization. Annals of Operations Research, 265(1), 1-4. Lien externe
Anjos, M. F., & Vieira, M. V.C. (2018). Preface to the INFOR special issues on facility layout. INFOR Information Systems and Operational Research, 56(4), 361-363. Lien externe
Anjos, M. F., Fischer, A., & Hungerländer, P. (2018). Improved exact approaches for row layout problems with departments of equal length. European Journal of Operational Research, 270(2), 514-529. Lien externe
Arab, H., Dufour, S., Moldovan, E., Akyel, C., & Tatu, S. O. (2018). A 77-GHz six-port sensor for accurate near-field displacement and doppler measurements. Sensors, 18(8), 1-19. Disponible
Arreckx, S., & Orban, D. (2018). A regularized factorization-free method for equality-constrained optimization. SIAM Journal on Optimization, 28(2), 1613-1639. Lien externe
Audet, C. (2018). Tuning Runge-Kutta parameters on a family of ordinary differential equations. International Journal of Mathematical Modelling and Numerical Optimisation, 8(3). Lien externe
Audet, C., & Hare, W. (2018). Algorithmic construction of the subdifferential from directional derivatives. Set-Valued and Variational Analysis, 26(3), 431-447. Lien externe
Audet, C., & Tribes, C. (2018). Mesh-based Nelder-Mead algorithm for inequality constrained optimization. Computational Optimization and Applications, 71(2), 331-352. Lien externe
Audet, C., Conn, A. R., Le Digabel, S., & Peyrega, M. (2018). A progressive barrier derivative-free trust-region algorithm for constrained optimization. Computational Optimization and Applications, 71(2), 307-329. Lien externe
Audet, C., Ihaddadene, A., Le Digabel, S., & Tribes, C. (2018). Robust optimization of noisy blackbox problems using the Mesh Adaptive Direct Search algorithm. Optimization Letters, 12(4), 675-689. Lien externe
Audet, C., Kokkolaras, M., Le Digabel, S., & Talgorn, B. (2018). Order-based error for managing ensembles of surrogates in mesh adaptive direct search. Journal of Global Optimization, 70(3), 645-675. Lien externe
Bai, X., Marcotte, D., Gamache, M., Gregory, D., & Lapworth, A. (2018). Automatic generation of feasible mining pushbacks for open pit strategic planning. Journal of the Southern African Institute of Mining and Metallurgy, 118(5), 515-530. Disponible
Bassis, N. F., & Armellini, F. (2018). Systems of innovation and innovation ecosystems: a literature review in search of complementarities. Journal of Evolutionary Economics, 28(5), 1053-1080. Disponible
Ben Ali, M., D'Amours, S., Gaudreault, J., & Carle, M.-A. (2018). Configuration and evaluation of an integrated demand management process using a space-filling design and Kriging metamodeling. Operations Research Perspectives, 5, 45-58. Disponible
Benkalai, I., Rebaine, D., & Baptiste, P. (2018). Scheduling flow shops with operators. International Journal of Production Research, 57(2), 338-356. Lien externe
Bernard, S. (2018). Multidimensional Green Product Design. Environmental and Resource Economics, 72(4), 1183-1202. Lien externe
Bingane, C., Anjos, M. F., & Le Digabel, S. (2018). Tight-and-Cheap Conic Relaxation for the AC Optimal Power Flow Problem. IEEE Transactions on Power Systems, 33(6), 7181-7188. Lien externe
Bjorn, A., & Røpke, I. (2018). What does it really mean to be a strongly sustainable company? - A response to Nikolaou and Tsalis. Journal of Cleaner Production, 198, 208-214. Lien externe
Bjorn, A., Kalbar, P., Nygaard, S. E., Kabins, S., Jensen, C. L., Birkved, M., Schmidt, J., & Hauschild, M. Z. (2018). Pursuing necessary reductions in embedded GHG emissions of developed nations: Will efficiency improvements and changes in consumption get us there? Global Environmental Change-Human and Policy Dimensions, 52, 314-324. Lien externe
Bjørn, A., Richardson, K., & Hauschild, M. Z. (2018). A Framework for Development and Communication of Absolute Environmental Sustainability Assessment Methods. Journal of Industrial Ecology, 23(4), 838-854. Lien externe
Bouslah, B., Gharbi, A., & Pellerin, R. (2018). Joint production, quality and maintenance control of a two-machine line subject to operation-dependent and quality-dependent failures. International Journal of Production Economics, 195(Supplement), 210-226. Lien externe
Brunet, C. M., Savadogo, O., Baptiste, P., & Bouchard, M. A. (2018). Shedding some light on photovoltaic solar energy in Africa – A literature review. Renewable and Sustainable Energy Reviews, 96, 325-342. Disponible
Bürgy, R., & Bulbul, K. (2018). The job shop scheduling problem with convex costs. European Journal of Operational Research, 268(1), 82-100. Lien externe
Bürgy, R., Baptiste, P., Hertz, A., Rebaine, D., & Linhares, A. (2018). A stochastic online algorithm for unloading boxes from a conveyor line. Flexible Services and Manufacturing Journal, 30(4), 764-784. Lien externe
Candela, R., Becquart, C. S., Domain, C., Mousseau, N., & Veiga, R. (2018). Interaction between interstitial carbon atoms and an ½ 〈111〉 self-interstitial atoms loop in an iron matrix: a combined DFT, off lattice KMC and MD study. Journal of Physics: Condensed Matter, 30(33), 335901. Lien externe
Carvalho, M., Klimentova, X., & Viana, A. (2018). Observability of power systems with optimal PMU placement. Computers & Operations Research, 96, 330-349. Lien externe
Carvalho, M., Lodi, A., & Marcotte, P. (2018). A polynomial algorithm for a continuous bilevel knapsack problem. Operations Research Letters, 46(2), 185-188. Lien externe
Carvalho, M., Pedroso, J. P., Telha, C., & Van Vyve, M. (2018). Competitive uncapacitated lot-sizing game. International Journal of Production Economics, 204, 148-159. Lien externe
Chan, C. K., Fang, F., & Langevin, A. (2018). Single-vendor multi-buyer supply chain coordination with stochastic demand. International Journal of Production Economics, 206, 110-133. Lien externe
Cheng, C., Qi, M., & Rousseau, L.-M. (2018). Fuel Consumption Optimization Model for the Multi-Period Inventory Routing Problem. Transportation Research Record, 2672(9), 59-69. Lien externe
Cheng, C., Qi, M., Zhang, Y., & Rousseau, L.-M. (2018). A two-stage robust approach for the reliable logistics network design problem. Transportation Research Part B: Methodological, 111, 185-202. Lien externe
Chételat, D., Narayanan, R., & Wells, M. T. (2018). On the domain of attraction of a Tracy-Widom law with applications to testing multiple largest roots. Journal of Multivariate Analysis, 165, 132-142. Lien externe
Chinniah, Y. A., Gauthier, F., Aucourt, B., & Burlet-Vienney, D. (2018). Validation of the impact of architectural flaws in six machine risk estimation tools. Safety Science, 101, 248-259. Lien externe
Choi, H., Kim, H., & Laforest, M. (2018). Relaxation model for the p-Laplacian problem with stiffness. Journal of Computational and Applied Mathematics, 344, 173-189. Lien externe
Costa, L., Lust, T., Kramer, R., & Subramanian, A. (2018). A two-phase Pareto local search heuristic for the bi-objective pollution-routing problem. Networks, 72(3), 311-336. Lien externe
Dadouchi, C., & Agard, B. (2018). Lowering penalties related to stock-outs by shifting demand in product recommendation systems. Decision Support Systems, 114, 61-69. Lien externe
Dagdougui, H., Ouammi, A., & Dessaint, L. A. (2018). Peak Load Reduction in a Smart Building Integrating Microgrid and V2B-Based Demand Response Scheme. IEEE Systems Journal, 13(3), 3274-3282. Lien externe
Dahmen, S., Rekik, M., & Soumis, F. (2018). An implicit model for multi-activity shift scheduling problems. Journal of Scheduling, 21(3), 285-304. Lien externe
Daras, G., Agard, B., & Penz, B. (2018). A spatial data pre-processing tool to improve the quality of the analysis and to reduce preparation duration. Computers & Industrial Engineering, 119, 219-232. Lien externe
Darrigrand, V., Rodriguez-Rozas, A., Muga, I., Pardo, D., Romkes, A., & Prudhomme, S. (2018). Goal-oriented adaptivity using unconventional error representations for the multidimensional Helmholtz equation. International Journal for Numerical Methods in Engineering, 113(1), 22-42. Lien externe
Desfontaines, L., & Desaulniers, G. (2018). Multiple depot vehicle scheduling with controlled trip shifting. Transportation Research Part B: Methodological, 113, 34-53. Lien externe
Djeumou Fomeni, F., Gabriel, S. A., & Anjos, M. F. (2018). Applications of logic constrained equilibria to traffic networks and to power systems with storage. Journal of the Operational Research Society, 70(2), 310-325. Lien externe
El Hachemi, N., Saddoune, M., El Hallaoui, I., & Rousseau, L.-M. (2018). A two-phase approach to solve the synchronized bin–forklift scheduling problem. Journal of Intelligent Manufacturing, 29(3), 651-657. Lien externe
Elsheikh, A., Yacout, S., & Ouali, M.-S. (2018). Bidirectional handshaking LSTM for remaining useful life prediction. Neurocomputing, 323(148-156), 148-156. Lien externe
Errico, F., Desaulniers, G., Gendreau, M., Rei, W., & Rousseau, L.-M. (2018). The vehicle routing problem with hard time windows and stochastic service times. EURO Journal on Transportation and Logistics, 7(3), 223-251. Lien externe
Fakher, H. B., Nourelfath, M., & Gendreau, M. (2018). Integrating production, maintenance and quality: A multi-period multi-product profit-maximization model. Reliability Engineering & System Safety, 170, 191-201. Lien externe
Farnia, F., De Marcellis-Warin, N., & Warin, T. (2018). Technical barriers to trade: A Canadian perspective on ecolabelling. Global Economy Journal, 18(1). Lien externe
Farvaque, É., Foucault, M., & Joanis, M. (2018). L'efficacité des règles budgétaires dans les provinces canadiennes. Revue française d'économie, Vol. XXXII(4), 131-160. Lien externe
Frappier, A., Morency, C., & Trépanier, M. (2018). Measuring the quality and diversity of transit alternatives. Transport Policy, 61(Supplement), 51-59. Lien externe
Froger, A., Gendreau, M., Mendoza, J. E., Pinson, É., & Rousseau, L.-M. (2018). Solving a wind turbine maintenance scheduling problem. Journal of Scheduling, 21(1), 53-76. Lien externe
Gambella, C., Lodi, A., & Vigo, D. (2018). Exact solutions for the carrier-vehicle traveling salesman problem. Transportation Science, 52(2), 320-330. Lien externe
Gauthier, F., Chinniah, Y. A., Burlet-Vienney, D., Aucourt, B., & Larouche, S. (2018). Risk assessment in safety of machinery: Impact of construction flaws in risk estimation parameters. Safety Science, 109, 421-433. Lien externe
Gauvin, C., Delage, E., & Gendreau, M. (2018). A stochastic program with time series and affine decision rules for the reservoir management problem. European Journal of Operational Research, 267(2), 716-732. Lien externe
Gauvin, C., Delage, E., & Gendreau, M. (2018). A successive linear programming algorithm with non-linear time series for the reservoir management problem. Computational Management Science, 15(1), 55-86. Lien externe
Gheribi, A. E., Pelton, A., Bélisle, E., Le Digabel, S., & Harvey, J.-P. (2018). On the prediction of low-cost high entropy alloys using new thermodynamic multi-objective criteria. ACTA Materialia, 161, 73-82. Lien externe
Gomez-Herrera, J. A., & Anjos, M. F. (2018). Optimal collaborative demand-response planner for smart residential buildings. Energy, 161, 370-380. Lien externe
Gouveia, L., Joyce-Moniz, M., & Leitner, M. (2018). Branch-and-cut methods for the Network Design Problem with Vulnerability Constraints. Computers & Operations Research, 91, 190-208. Lien externe
Guntzburger, Y., Pauchant, T. C., & Tanguy, P. A. (2018). Empowering Engineering Students in Ethical Risk Management: An Experimental Study. Science and Engineering Ethics, 25(3), 911-937. Lien externe
Hadengue, M., De Marcellis-Warin, N., & Warin, T. (2018). Reverse Innovation and Reverse Technology Transfer: From Made in China to Discovered in China in the Pharmaceutical Sector. [Innovation inverse et transfert technologique inverse : Du fabriqué en Chine au découvert en Chine dans le secteur pharmaceutique]. Management international, 19(4), 49-69. Lien externe
Hansen, P., Aouchiche, M., Caporossi, G., Hertz, A., & Sellal, C. (2018). Mixed integer programming and extremal chemical graphs. International Journal of Chemistry and Chemical Engineering Systems, 3, 22-30. Lien externe
Hertz, A., Lozin, V., Ries, B., Zamaraev, V., & de Werra, D. (2018). Dominating induced matchings in graphs containing no long claw. Journal of Graph Theory, 88(1), 18-39. Lien externe
Hojabri, H., Gendreau, M., Potvin, J. Y., & Rousseau, L.-M. (2018). Large neighborhood search with constraint programming for a vehicle routing problem with synchronization constraints. Computers & Operations Research, 92, 87-97. Lien externe
Huet, P. (2018). Economics of climate change and structuring of the field of economics. Social Science Information Sur Les Sciences Sociales, 57(1), 31-58. Lien externe
Inaba, F. K., Teatini Salles, E. O., Perron, S., & Caporossi, G. (2018). DGR-ELM-distributed generalized regularized ELM for classification. Neurocomputing, 275, 1522-1530. Lien externe
Jay, A., Hémeryck, A., Richard, N., Martin-Samos, L., Raine, M., Le Roch, A., Mousseau, N., Goiffon, V., Paillet, P., Gaillardin, M., & Magnan, P. (2018). Simulation of Single-Particle Displacement Damage in Silicon. Part III: First Principle Characterization of Defect Properties. IEEE Transactions on Nuclear Science, 65(2), 724-731. Lien externe
Joanis, M. (2018). The politics of checkbook federalism: can electoral considerations affect federal-provincial transfers? Public Finance Review, 46(4), 665-691. Lien externe
Jocelyn, S., Ouali, M.-S., & Chinniah, Y. A. (2018). Estimation of probability of harm in safety of machinery using an investigation systemic approach and Logical Analysis of Data. Safety Science, 105, 32-45. Lien externe
Karimi, A., Gendreau, M., & Verter, V. (2018). Performance approximation of emergency service systems with priorities and partial backups. Transportation Science, 52(5), 1235-1252. Lien externe
Karimi, B., Chinniah, Y. A., Burlet-Vienney, D., & Aucourt, B. (2018). Qualitative study on the control of hazardous energy on machinery using lockout and alternative methods. Safety Science, 107, 22-34. Lien externe
Kuiteing, A. K., Marcotte, P., & Savard, G. (2018). Pricing and revenue maximization over a multicommodity transportation network: the nonlinear demand case. Computational Optimization and Applications, 71(3), 641-671. Lien externe
Labelle, A., & Frayret, J.-M. (2018). Agent-based model for end-of-life product flow analysis. Resources, 7(3), 1-20. Disponible
Lakiza, V., & Deschamps, I. (2018). How to develop innovation KPIs in an execution-oriented company. Technology Innovation Management Review, 8(7), 14-30. Disponible
Lambe, A. B., & Czekanski, A. (2018). Topology optimization using a continuous density field and adaptive mesh refinement. International Journal for Numerical Methods in Engineering, 113(3), 357-373. Lien externe
Lefebvre, M. (2018). LGQ homing problems for processes used in financial mathematics. Romanian Journal of Pure and Applied Mathematics, 63(1), 27-37. Lien externe
Lefebvre, M. (2018). Optimally ending an epidemic. Optimization, 67(3), 399-407. Lien externe
Lefebvre, M., & Moutassim, A. (2018). Exact solutions to an optimal control problem for an Ornstein-Uhlenbeck process with random parameters. Palestine Technical University Research Journal, 6(2), 33-33. Lien externe
Lesage, P., Mutel, C., Schenker, U., & Margni, M. (2018). Uncertainty analysis in LCA using precalculated aggregated datasets. International Journal of Life Cycle Assessment, 23(11), 2248-2265. Lien externe
Lin, C.-K., Lin, R.-T., Chen, P.-C., Wang, P., De Marcellis-Warin, N., Zigler, C., & Christiani, D. C. (2018). A global perspective on sulfur oxide controls in coal-fired power plants and cardiovascular disease. Scientific Reports, 8(1), 2611 (9 pages). Disponible
Lodi, A., & Moradi, A. (2018). Experiments on virtual private network design with concave capacity costs. Optimization Letters, 12(5), 945-957. Lien externe
Lonca, G., Muggeo, R., Imbeault-Tetreault, H., Bernard, S., & Margni, M. (2018). Does material circularity rhyme with environmental efficiency? Case studies on used tires. Journal of Cleaner Production, 183, 424-435. Lien externe
Maher, S. J., Desaulniers, G., & Soumis, F. (2018). The daily tail assignment problem under operational uncertainty using look-ahead maintenance constraints. European Journal of Operational Research, 264(2), 534-547. Lien externe
Mahmoud, S., Trochet, M., Restrepo, O. A., & Mousseau, N. (2018). Study of point defects diffusion in nickel using kinetic activation-relaxation technique. ACTA Materialia, 144(Supplement), 679-690. Lien externe
Mai, T., Bastin, F., & Frejinger, E. (2018). A decomposition method for estimating recursive logit based route choice models. EURO Journal on Transportation and Logistics, 7(3), 253-275. Lien externe
Marchand, A., Gendreau, M., Blais, M., & Emiel, G. (2018). Fast near-optimal heuristic for the short-term hydro-generation planning problem. IEEE Transactions on Power Systems, 33(1), 227-235. Lien externe
Mathlouthi, I., Gendreau, M., & Potvin, J.-Y. (2018). Mixed integer linear programming for a multi-attribute technician routing and scheduling problem. INFOR, 56(1), 33-49. Lien externe
Meango, T. J.-M., & Ouali, M.-S. (2018). Failure interaction models for multicomponent systems: a comparative study. SN Applied Sciences, 1(1). Lien externe
Mengis, N., Partanen, A.-I., Jalbert, J., & Matthews, H. D. (2018). 1.5 °C carbon budget dependent on carbon cycle uncertainty and future non-CO₂ forcing. Scientific Reports, 8(1), 5831 (7 pages). Disponible
Mikhaylin, S., Patouillard, L., Margni, M., & Bazinet, L. (2018). Milk protein production by more environmentally sustainable process: bipolar membrane electrodialysis coupled with ultrafiltration. Green Chemistry, 20(2), 449-456. Lien externe
Mirshahi, M., Partovi Nia, V., & Adjengue, L. (2018). Automatic odor prediction for electronic nose. Journal of Applied Statistics, 45(15), 2788-2799. Lien externe
Moeuf, A., Pellerin, R., Lamouri, S., Tamayo-Giraldo, S., & Barbaray, R. (2018). The industrial management of SMEs in the era of Industry 4.0. International Journal of Production Research, 56(3), 1118-1136. Lien externe
Morin, S., Robert, J.-M., & Gabora, L. (2018). How to train future engineers to be more creative? An educative experience. Thinking Skills and Creativity, 28, 150-166. Lien externe
Murray, P. W., Agard, B., & Barajas, M. A. (2018). ASACT - Data preparation for forecasting: A method to substitute transaction data for unavailable product consumption data. International Journal of Production Economics, 203, 264-275. Lien externe
Murray, P. W., Agard, B., & Barajas, M. A. (2018). Forecast of individual customer's demand from a large and noisy dataset. Computers & Industrial Engineering, 118, 33-43. Lien externe
Niknazar, P., & Bourgault, M. (2018). Analysis of axioms and assumptions of data envelopment analysis: application for efficiency measurement in project management contexts. International Journal of Productivity and Quality Management, 23(4), 446-472. Lien externe
Niroumandrad, N., & Lahrichi, N. (2018). A stochastic tabu search algorithm to align physician schedule with patient flow. Health Care Management Science, 21(2), 244-258. Lien externe
Nour, M., Gendreau, M., & Lakhssassi, A. (2018). Automatic laser interstitial thermal therapy for robot-assisted surgery. Global Journal of Advanced Engineering Technologies and Sciences, 5(3), 8-14. Lien externe
Nunez, M., Rosenbaum, R. K., Karimpour, S., Boulay, A.-M., Lathuilliere, M. J., Margni, M., Scherer, L., Verones, F., & Pfister, S. (2018). A multimedia hydrological fate modeling framework to assess water consumption impacts in life cycle assessment. Environmental Science and Technology, 52(8), 4658-4667. Lien externe
Orban, D. (2018). Introduction to computation and programming using Python, Second edition, with application to understanding data (review). SIAM Review, 60(2), 483-485. Lien externe
Ouzineb, M., Mhada, F. Z., Pellerin, R., & El Hallaoui, I. (2018). Optimal planning of buffer sizes and inspection station positions. Production & Manufacturing Research, 6(1), 90-112. Lien externe
Pan, S., Akplogan, M., Touati, N., Létocart, L., Wolfler Calvo, R., & Rousseau, L.-M. (2018). A hybrid heuristic for the multi-activity tour scheduling problem. Electronic Notes in Discrete Mathematics, 69, 333-340. Lien externe
Paredes Valencia, A., Doyen, A., Benoit, S., Margni, M., & Pouliot, Y. (2018). Effect of ultrafiltration of milk prior to fermentation on mass balance and process efficiency in greek-style yogurt manufacture. Foods, 7(9). Disponible
Pasquier, P., Zarrella, A., & Labib, R. (2018). Application of artificial neural networks to near-instant construction of short-term g-functions. Applied Thermal Engineering, 143, 910-921. Lien externe
Patouillard, L., Bulle, C., Querleu, C., Maxime, D., Osset, P., & Margni, M. (2018). Critical review and practical recommendations to integrate the spatial dimension into life cycle assessment. Journal of Cleaner Production, 177, 398-412. Lien externe
Paula Pinheiro, M. A., Jugend, D., Demattê Filho, L. C., & Armellini, F. (2018). Framework proposal for ecodesign integration on product portfolio management. Journal of Cleaner Production, 185, 176-186. Disponible
Perrier, N., Benbrahim, S.-E., & Pellerin, R. (2018). The core processes of project control: A network analysis. Procedia Computer Science, 138, 697-704. Disponible
Perrier, N., Hajji, A., Berthaut, F., & Pellerin, R. (2018). A path relinking-based scatter search for the resource-constrained project scheduling problem. International Journal of Project Organisation and Management, 10(1), 35 pages. Lien externe
Ragab, A., El-Koujok, M., Poulin, B., Amazouz, M., & Yacout, S. (2018). Fault diagnosis in industrial chemical processes using interpretable patterns based on logical analysis of data. Expert Systems With Applications, 95, 368-383. Lien externe
Rahmaniani, R., Crainic, T. G., Gendreau, M., & Rei, W. (2018). Accelerating the benders decomposition method: application to stochastic network design problems. SIAM Journal on Optimization, 28(1), 875-903. Lien externe
Restrepo, M. I., Gendron, B., & Rousseau, L.-M. (2018). Combining Benders decomposition and column generation for multi-activity tour scheduling. Computers & Operations Research, 93, 151-165. Lien externe
Restrepo, O. A., Mousseau, N., Trochet, M., El-Mellouhi, F., Bouhali, O., & Becquart, C. S. (2018). Carbon diffusion paths and segregation at high-angle tilt grain boundaries in α-Fe studied by using a kinetic activation-relation technique. Physical Review B, 97(5), 054309. Lien externe
Rodrigues de Sousa, V. J., Anjos, M. F., & Le Digabel, S. (2018). Computational study of valid inequalities for the maximum k-cut problem. Annals of Operations Research, 265(1), 5-27. Lien externe
Rodriguez Sarasty, J. A., Anjos, M. F., Cote, P., & Desaulniers, G. (2018). MILP Formulations for Generator Maintenance Scheduling in Hydropower Systems. IEEE Transactions on Power Systems, 33(6), 6171-6180. Lien externe
Rostami, B., Chassein, A., Hopf, M., Frey, D., Buchheim, C., Malucelli, F., & Goerigk, M. (2018). The quadratic shortest path problem: complexity, approximability, and solution methods. European Journal of Operational Research, 268(2), 473-485. Lien externe
Rostami, B., Kämmerling, N., Buchheim, C., & Clausen, U. (2018). Reliable single allocation hub location problem under hub breakdowns. Computers & Operations Research, 96, 15-29. Lien externe
Saad, B. M., Alexanderian, A., Prudhomme, S., & Knio, O. M. (2018). Probabilistic modeling and global sensitivity analysis for CO2 storage in geological formations: a spectral approach. Applied Mathematical Modelling, 53, 584-601. Lien externe
Salavati-Khoshghalb, M., Gendreau, M., Jabali, O., & Rei, W. (2018). An exact algorithm to solve the vehicle routing problem with stochastic demands under an optimal restocking policy. European Journal of Operational Research, 273(1), 175-189. Lien externe
Sanger, W., & Warin, T. (2018). The public's perception of political parties during the 2014 Québec election on Twitter. Canadian Journal of Communication, 43(2), 245-263. Disponible
Sekkay, F., Imbeau, D., Chinniah, Y. A., Dubé, P.-A., De Marcellis-Warin, N., Beauregard, N., & Trépanier, M. (2018). Risk factors associated with self-reported musculoskeletal pain among short and long distance industrial gas delivery truck drivers. Applied Ergonomics, 72, 69-87. Lien externe
Stewart, R., Fantke, P., Bjorn, A., Owsianiak, M., Molin, C., Hauschild, M. Z., & Laurent, A. (2018). Life cycle assessment in corporate sustainability reporting: Global, regional, sectoral, and company-level trends. Business Strategy and the Environment, 27(8), 1751-1764. Lien externe
Tahmooresnejad, L., & Beaudry, C. (2018). Do patents of academic funded researchers enjoy a longer life? A study of patent renewal decisions. PLOS One, 13(8), e0202643 (22 pages). Disponible
Tahmooresnejad, L., & Beaudry, C. (2018). The importance of collaborative networks in Canadian scientific research. Industry and Innovation, 25(10), 990-1029. Lien externe
Talgorn, B., Audet, C., Le Digabel, S., & Kokkolaras, M. (2018). Locally weighted regression models for surrogate-assisted design optimization. Optimization and Engineering, 19(1), 213-238. Lien externe
Taş, D., Gendreau, M., Jabali, O., & Jans, R. (2018). A capacitated lot sizing problem with stochastic setup times and overtime. European Journal of Operational Research, 273(1), 146-159. Lien externe
Warin, T., & Sanger, W. (2018). Connectivity and closeness among international financial institutions: a network theory perspective. International Journal of Comparative Management, 1(3), 225-254. Lien externe
Warin, T., & Sanger, W. (2018). European Central Banks monetary policy decisions: A dataset of two decades of press conferences. Data in Brief, 20, 794-798. Disponible
Wielinski, G., Trépanier, M., Morency, C., & Habib, K. N. (2018). Comparing multiple data streams to assess free-floating carsharing use. Transportation Research Procedia, 32, 617-626. Disponible
Xu, X., Chan, C. K., & Langevin, A. (2018). Coping with risk management and fill rate in the loss-averse newsvendor model. International Journal of Production Economics, 195, 296-310. Lien externe
Yao, L., Dimitrakopoulos, R., & Gamache, M. (2018). A new computational model of high-order stochastic simulation based on spatial Legendre moments. Mathematical Geosciences, 50(8), 929-960. Disponible
Yazdani, A., Hilbrecht, M., Imbeau, D., Bigelow, P., Patrick Neumann, W., Pagell, M., & Wells, R. (2018). Integration of musculoskeletal disorders prevention into management systems: A qualitative study of key informants' perspectives. Safety Science, 104, 110-118. Lien externe
Zaghrouti, A., El Hallaoui, I., & Soumis, F. (2018). Improved integral simplex using decomposition for the set partitioning problem. EURO Journal on Computational Optimization, 6(2), 185-206. Lien externe
Gendreau, M. (2018). Comments on: Disruption management in vehicle routing and scheduling for road freight transport: a review [Commentaire ou lettre]. Top, 26(1), 18-20. Lien externe
Aardal, K., Von Heymann, F., Lodi, A., Tramontani, A., & Wolsey, L. A. (2018). Lattice reformulations cuts. (Rapport technique n° DS4DM-2018-003). Non disponible
Armellini, F., Beaudry, C., Bourgault, M., Lecante, C., Mahecha, D., & Morin, S. (2018). Le virage numérique en aérospatiale : tendance de convergence, exploration de signaux faibles et proposition d'un agenda R-D pour la grappe montréalaise. (Rapport technique n° CRIAQ-1646). Non disponible
Bengio, Y., Lodi, A., & Prouvost, A. (2018). Machine learning for combinatorial optimization : a methodological tour d'horizon. (Rapport technique n° DS4DM-2018-08). Non disponible
Borzou, R., Desaulniers, G., Fausto, E., & Lodi, A. (2018). A PCA-based approximation scheme for combinatorial optimization with uncertain and correlated data. (Rapport technique n° DS4DM-2018-002). Non disponible
Buttari, A., Orban, D., Ruiz, D., & Titley-Peloquin, D. (2018). A tridiagonalization method for symmetric saddle-point and quasi-definitive system. (Rapport technique n° G-2018-42). Lien externe
Cheng, C., Adulyasak, Y., & Rousseau, L.-M. (2018). Formulations and exacts algorithms for drone routing problem. (Rapport technique n° CIRRELT-2018-31). Lien externe
Cohendet, P., Simon, L., Armellini, F., Beaudry, C., Bourgault, M., Grandadam, D., Parize, C., Solar-Pelletier, L., Turkina, E., Dévailly, F.-X., Manent-Duléry, M., Genest, B., Lautraite, H., Marecha, D., Sinclair, T., Dupouët, O., & Lecante, C. (2018). Aérospatiale numérique. (Rapport technique). Non disponible
Dahito, M.-A., & Orban, D. (2018). The conjugate residual method in linesearch and trust-region methods. (Rapport technique n° G-2018-50). Lien externe
David-Beaulieu, L., Solar-Pelletier, L., & Joanis, M. (2018). Économie collaborative et coopérative : freins et leviers des coopératives de plateforme au Québec. (Rapport technique n° 2018-02). Lien externe
Emde, S., Polten, L., & Gendreau, M. (2018). Logic-based benders decomposition for scheduling a batching machine. (Rapport technique n° CIRRELT-2018-40). Lien externe
Estrin, R., Orban, D., & Saunders, M. A. (2018). LNLQ: An iterative method for least-norm problems with an error minimization property. (Rapport technique n° G-2018-40). Lien externe
Fischetti, M., Lodi, A., & Zarpellon, G. (2018). Learning milp resolution outcomes before reaching time-limit. (Rapport technique n° DS4DM-2018-009). Lien externe
Fontaine, P., Crainic, T. G., Gendreau, M., & Minner, S. (2018). Population-based risk equilibration for the multi-mode hazmat transport network design problem. (Rapport technique n° CIRRELT-2018-56). Lien externe
Fontaine, P., Crainic, T. G., Minner, S., & Gendreau, M. (2018). Population-based risk equilibration for the multi-mode hazmat transport network design problem. (Rapport technique n° CIRRELT-2018-19). Lien externe
Gmira, M., Gendreau, M., Lodi, A., & Potvin, J.-Y. (2018). Travel speed prediction based on learning methods for home delivery. (Rapport technique n° DS4DM-2018-012). Non disponible
Gmira, M., Gendreau, M., Lodi, A., & Potvin, J.-Y. (2018). Travel speed prediction based on learning methods for home delivery. (Rapport technique n° CIRRELT-2018-46). Lien externe
Isac, J., Yan, G., Perrier, N., Pellerin, R., & Léger, P.-M. (2018). Extension d'activity gazer en tant qu'outil de suivi de projet. (Rapport technique n° CIRRELT-2018-53). Lien externe
Isac, J., Yan, G., Perrier, N., Pellerin, R., & Léger, P.-M. (2018). A Model for Advanced Planning Systems Dedicated to the Engineer-To-Order Context. (Rapport technique). Non disponible
Kashani, H. B., & Trépanier, M. (2018). A typology of carsharing customers in Montréal based on large-scale behavioral dataset. (Rapport technique n° CIRRELT-2018-16). Lien externe
Mathlouthi, I., Gendreau, M., & Potvin, J.-Y. (2018). A metaheuristic based on tabu search for solving a technician routing and scheduling problem. (Rapport technique n° CIRRELT-2018-01). Lien externe
Moradi, M., & Trépanier, M. (2018). Temporal clusters analysis of public transit passengers using smart card data. (Rapport technique n° CIRRELT-2018-28). Lien externe
Rahmaniani, R., Ahmed, S., Crainic, T. G., Gendreau, M., & Rei, W. (2018). The benders dual decomposition method. (Rapport technique n° CIRRELT-2018-03). Lien externe
Rahmaniani, R., Crainic, T. G., Gendreau, M., & Rei, W. (2018). The asynchronous benders decomposition method. (Rapport technique n° CIRRELT-2018-07). Lien externe
Rostami, B., Desaulniers, G., Errico, F., & Lodi, A. (2018). The vehicle routing problem with stochastic and correlated travel times. (Rapport technique n° DS4DM-2018-001). Lien externe
Rostami, B., Errico, F., & Lodi, A. (2018). A convex reformulation and an outer approximation for a class of binary quadratic program. (Rapport technique n° DS4DM-2018-002). Lien externe
Rostami, B., Kämmerling, N., Buchheim, C., Naoum-Sawaya, J., & Clausen, U. (2018). Stochastic single-allocation hub location. (Rapport technique n° DS4DM-2018-005). Lien externe
Telgeiro, S., Solar-Pelletier, L., Bernard, S., & Joanis, M. (2018). Économie circulaire au Québec : opportunités et impacts économiques. (Rapport technique). Lien externe
Troy, P., Lahrichi, N., Porubska, D., & Rosenberg, L. (2018). Fine-grained simulation optimization for the design and operations of a multi-activity clinic. (Rapport technique n° CIRRELT-2018-47). Lien externe
Abubakr, A., Hassan, A., Ragab, A., Yacout, S., Savaria, Y., & Sawan, M. (mai 2018). High-temperature modeling of the I-V characteristics of GaN150 HEMT using machine learning techniques [Communication écrite]. IEEE International Symposium on Circuits and Systems (ISCAS 2018), Florence, Italie (5 pages). Lien externe
Alizadeh, E., Koujok, M. E., Ragab, A., & Amazouz, M. (août 2018). A Data-Driven Causality Analysis Tool for Fault Diagnosis in Industrial Processes [Communication écrite]. 10th IFAC Symposium on Fault Detection, Supervision and Safety for Technical Processes (SAFEPROCESS 2018), Warsaw, Poland. Publié dans IFAC-PapersOnLine, 51(24). Lien externe
Aly, M., Khomh, F., & Yacout, S. (novembre 2018). Kubernetes or OpenShift? Which Technology Best Suits Eclipse Hono IoT Deployments [Communication écrite]. 11th IEEE Conference on Service-Oriented Computing and Applications (SOCA 2018), Paris, France. Lien externe
Amer, M., Hassan, A., Ragab, A., Yacout, S., Savaria, Y., & Sawan, M. (mai 2018). High-Temperature Empirical Modeling for the I-V Characteristics of GaN150-Based HEMT [Communication écrite]. IEEE International Symposium on Circuits and Systems (ISCAS 2018), Florence, Italy. Lien externe
Anjos, M. F., Hungerländer, P., & Maier, K. (décembre 2018). An integer linear programming approach for the combined cell layout problem [Communication écrite]. IEEE International Conference on Industrial Engineering and Engineering Management (IEEM 2018), Bangkok, Thailand. Lien externe
Armellini, F., Beaudry, C., & Achiche, S. (septembre 2018). Assessing interrater fidelity for continuous innovation : how differently is innovation perceived by R&D and operations management? [Communication écrite]. 19th International Continuous Innovation Network Conference (CINet 2018), Dublin, Ireland. Non disponible
Aucourt, B., Chinniah, Y. A., Jocelyn, S., & Bourbonnière, R. (octobre 2018). Practical application and experience : tool for the safety of industrial machinery in reduced risk conditions [Communication écrite]. 9th International Conference on the Safety of Industrial Automated Systems (SIAS 2018), Nancy, France. Non disponible
Baptiste, P. (juillet 2018). DDMRP: Scheduling opportunities in case of complex BOMs [Communication écrite]. 7th International Conference on Information Systems, Logistics and Supply Chain (ILS 2018), Lyon, France. Non disponible
Baptiste, P., & Pellerin, R. (juin 2018). Planification à court terme dans un système de production complexe géré en DDMRP [Communication écrite]. 2e Conférence Internationale de Modélisation, Optimisation et Simulation (MOSIM 2018), Toulouse, France. Lien externe
Barolet, A. C., Cormack, G., & Barolet, D. (janvier 2018). 5-ALA photopreparation using pulsed NIR enhances skin fluorescence via temperature-independent cell signaling pathways [Communication écrite]. Mechanisms of Photobiomodulation Therapy XIII, San Francisco, CA, United states. Lien externe
Beaudry, C., & Bérubé, C. (juin 2018). Beyond the innovation obstacle paradox - The role of government support on helping firms overcome these obstacles and innovate [Communication écrite]. 52nd annual Conference of the Canadian Economics Association, Montréal, Qc, Canada. Non disponible
Beaudry, C., Bérubé, C., & Therrien, P. (juin 2018). Beyond the innovation obstacle paradox - The role of government support on helping firms overcome these obstacles and innovate [Communication écrite]. Atelier sur l'enquête sur l'innovation et les stratégies d'entreprise de Statistique Canada, Montréal, Qc, Canada. Non disponible
Beaudry, C., Hage, G., & Therrien, P. (avril 2018). The local context of advanced and digital technology and the impact of its use on firm performance [Communication écrite]. 5th annual Partnership Network Conference, Vancouver, BC, Canada. Non disponible
Beaudry, G., Pasquier, P., & Marcotte, D. (septembre 2018). Hydrogeothermal characterization and modelling of a standing column well experimental installation [Communication écrite]. IGSHPA Research Track, Stockholm, Sweden. Lien externe
Ben Ali, M., D'Amours, S., Gaudreault, J., & Carle, M.-A. (décembre 2018). Simulating an integrated revenue management approach in a production system with product substitution [Communication écrite]. 2018 Winter Simulation Conference, Gothenburg, Sweden. Lien externe
Benkalai, I., Rebaine, D., & Baptiste, P. (février 2018). Problème d'open shop avec opérateurs : nouveaux résultats de complexité [Communication écrite]. 19e congrès annuel de la Société Française de Recherche Opérationnelle et d'Aide à la Décision (ROADEF), Bretagne, France. Non disponible
Bernard, S. (mai 2018). Green design for durable goods with partial commitment ability and technological progress [Communication écrite]. 58th congrès annuel de la Société canadienne de science économique, Montréal, Qc. Non disponible
Bernard, S. (janvier 2018). Green design for durable goods with partial commitment ability and technological progress [Communication écrite]. Canadian Resource and Environmental Economics (CREEA 2018), Montréal, Qc. Non disponible
Bernard, S. (mai 2018). Green designs for durable goods with partial commitment ability and technological progress [Communication écrite]. 58e congrès de la Société canadienne de science économique, Montréal, Québec. Non disponible
Bernard, S. (juin 2018). Multidimensional design for durable goods : partial commitment ability and technological progress [Communication écrite]. 52nd Annual Conference of the Canadian Economics Association, Montréal, Québec. Non disponible
Bernard, S. (juin 2018). Multidimensional green product design and environmental policies [Communication écrite]. 6th world Congress of Environmental and Resource Economists, Gothenburg, Sweden. Non disponible
Blanco, C. M. R., Beaudry, C., & Armellini, F. (septembre 2018). Towards a definition and taxonomy of big science for public funding and evaluation [Communication écrite]. EU-SPRI Early Career Researcher Conference ECC, Rome, Italy. Non disponible
Bonami, P., Lodi, A., & Zarpellon, G. (juin 2018). Learning a classification of mixed-integer quadratic programming problems [Communication écrite]. 15th International Conference on Integration of Constraint Programming, Artificial Intelligence, and Operations Research (CPAIOR 2018), Delft, Netherlands. Lien externe
Burlet-Vienney, D., Belmekki, T., Chinniah, Y. A., Aucourt, B., & Ouali, M.-S. (octobre 2018). Analysis and prevention of serious and fatal accidents caused by mobile equipment in Québec [Communication écrite]. 9th International Conference on the Safety of Industrial Automated Systems (SIAS 2018), Nancy, France. Non disponible
Cappart, Q., Goutierre, E., Bergman, D., & Rousseau, L.-M. (janvier 2019). Improving optimization bounds using machine learning: Decision diagrams meet deep reinforcement learning [Communication écrite]. Association for the Advancement of Artificial Intelligence (AAAI 2019), Honolulu, HI. Lien externe
Cappart, Q., Thomas, C., Schaus, P., & Rousseau, L.-M. (août 2018). A constraint programming approach for solving patient transportation problems [Communication écrite]. 24th International Conference on the Principles and Practice of Constraint Programming (CP 2018), Lille, France. Lien externe
Danjou, C. (mai 2018). Positionnements stratégiques du vêtement connecté dans le contexte de l'Industrie 4.0 [Communication écrite]. Wear It Smart 2018, Montréal, Québec, Canada. Lien externe
Danjou, C. (janvier 2018). Tools and concepts for system management in the era of Industry 4.0 [Communication écrite]. SENAI Seminar, Florianopolis, Brésil. Non disponible
Dauphin-Pierre, S., & Beaudry, C. (septembre 2018). Quebec's industry-university partnership model and its impact on the regional and national ecosystems [Communication écrite]. 16th International Triple Helix Conference, Manchester, UK. Non disponible
Deschaintres, É., Trépanier, M., & Morency, C. (juillet 2018). Analyzing Interpersonal and Intrapersonal Variability of Transit Use with Smart Card Data [Communication écrite]. Conference on Advanced Systems in Public Transport and TransitData, Brisbane, Australia. Lien externe
Deudon, M., Cournut, P., Lacoste, A., Adulyasak, Y., & Rousseau, L.-M. (juin 2018). Learning heuristics for the tsp by policy gradient [Communication écrite]. 15th International Conference on Integration of Constraint Programming, Artificial Intelligence, and Operations Research (CPAIOR 2018), Delft, Netherlands. Lien externe
Fadaee, S. S., Sajjad Ghaemi, M., Soufiani, H. A., & Sundaram, R. (mai 2017). Chiron: A robust recommendation system with graph regularizer [Communication écrite]. 10th International Conference on Computer Recognition Systems (CORES 2017), Polanica-zdroj, Poland. Lien externe
Fernandes, M. E., & Bernard, S. (juin 2018). Does a market with green goods voluntarily internalize externalities? Evidence from a lab experiment [Communication écrite]. World Congress of Environmental and Resource Economists (WRECE 2108), Gothenburg, Sweden. Non disponible
Fernandes, M. E., Houde, S., & Bernard, S. (juin 2018). Multidimensional green products design and environmental policies [Communication écrite]. World Congress of Environmental and Resource Economists (WRECE 2108), Gothenburg, Sweden. Non disponible
Gaudreault, J., & Shimazaki, H. (octobre 2018). State-space analysis of an ising model reveals contributions of pairwise interactions to sparseness, fluctuation, and stimulus coding of monkey V1 neurons [Communication écrite]. 27th International Conference on Artificial Neural Networks (ICANN 2018), Rhodes, Greece. Lien externe
Grogan, S., Gamache, M., & Pellerin, R. (juin 2018). The use of unmanned aerial vehicles and drones in search and rescue operations - a survey [Communication écrite]. PROLOG 2018, Hull, UK. Non disponible
Hage, G., & Beaudry, C. (septembre 2018). Open innovation and digital technology as a business strategy in a large Canadian ICT film [Communication écrite]. 16th International Triple Helix Conference, Manchester, UK. Non disponible
Hage, G., Beaudry, C., & Therrien, P. (juin 2018). Digital technologies, open innovation and their impact on survivability of Canadian firms [Communication écrite]. 52nd annual Conference of the Canadian Economics Association, Montréal, Qc, Canada. Non disponible
He, L., Trépanier, M., & Agard, B. (juin 2018). Classification des comportements spatio-temporels des usagers de transport collectif basés sur les données de cartes à puces [Communication écrite]. 1res Rencontres francophones Transport Mobilité (RFTM 2018), Lyon, France. Lien externe
He, L., Trépanier, M., & Agard, B. (juillet 2018). Space-time classification of public transit smart card users' activity locations form smart card data [Communication écrite]. 14th International Conference on Advanced Systems in Public Transport (CASPT 2018) ; in conjunction with 4th Workshop and Symposium on Research and Applications on the Use of Passive Data from Public Transport (TRANSIT DATA), Brisbane, Australia. Lien externe
Héroux-Vaillancourt, M., & Beaudry, C. (mai 2018). Comment mesurer l'impact de la culture sur la performance d'innovation? [Communication écrite]. 58e Congrès de la Société canadienne de sciences économiques, Montréal, Qc, Canada. Non disponible
Héroux-Vaillancourt, M., & Beaudry, C. (juin 2018). How innovation culture can impact technological performance? [Communication écrite]. 52nd annual Conference of the Canadian Economics Association, Montréal, Qc, Canada. Non disponible
Héroux-Vaillancourt, M., & Beaudry, C. (septembre 2018). Using a multi-trait multi-method matrix to validate innovation indicators build from firms' websites [Communication écrite]. 16th International Triple Helix Conference, Manchester, UK. Non disponible
Héroux-Vaillancourt, M., & Beaudry, C. (juillet 2018). Validation of innovation indicators from companies' websites [Communication écrite]. 2nd International Conference on Advanced Research Methods and Analytics (CARMA 2018), València, Spain. Lien externe
Ibrahim, M. M., Ahmed, A. M., Akah, H. E., Mohamed, M. I., & Yacout, S. (mars 2018). Integrated telemetry analysis using human expert knowledge and the logical analysis of data [Communication écrite]. IEEE Aerospace Conference (AERO 2018), Big Sky, MT (14 pages). Lien externe
Labelle, A., & Frayret, J.-M. (juillet 2018). Agent-based simulation model of consumer behaviour for end-of-life product flow analysis [Communication écrite]. 7th International Conference on Information Systems, Logistics and Supply Chain (ILS 2018), Lyon, France. Non disponible
Leduc, M., Mailhot, A., Jalbert, J., Pechenova, E., Hüttenhofer, L., Frigon, A., & Ludwig, R. (décembre 2018). Assessing the occurrence of extreme heat waves using the ClimEx large ensemble [Communication écrite]. AGU Fall Meeting, Washington, D.C., USA. Lien externe
Lefebvre, M. (avril 2018). A two-dimensional diffusion process as a degradation model [Communication écrite]. 54th ESReDA Seminar, Nantes, France (12 pages). Non disponible
Leng, C., Munizaga, M. A., & Trépanier, M. (janvier 2018). Estimation of public transport users migration using passive data [Communication écrite]. 97th Annual Meeting of the Transportation Research Board (TRB 2018), Washington, DC, United States (15 pages). Lien externe
Li, Y. Y., Marier-Bienvenue, T., & Wang, X. (janvier 2018). Blockchain technology in business organizations : a scoping review [Communication écrite]. 51st Hawaii International Conference on System Sciences (HICSS 2018), Waikoloa, Hawaii. Lien externe
Ma, D., Judd, K. L., Orban, D., & Saunders, M. A. (janvier 2017). Stabilized optimization via an NCL algorithm [Communication écrite]. 4th International Conference on Numerical Analysis and Optimization (NAO-IV 2017), Muscat, Oman. Lien externe
Marin, R. O., Kaminski, P. C., Armellini, F., & Bouchardy, A. (septembre 2018). Open innovation practices in the automotive industry : and exploratory comparison between Brazil and France [Communication écrite]. 27th SAE International Congress on Mobility Technology, São Paulo, Brazil. Lien externe
Martin, G., Baptiste, P., Lamothe, J., Miclo, R., & Lauras, M. (juillet 2018). A process map for the demand driven adaptive enterprise model: Towards an explicit cartography [Communication écrite]. 7th International Conference on Information Systems, Logistics and Supply Chain (ILS 2018), Lyon, France. Non disponible
Mbassegue, P., & Gardoni, M. (juillet 2018). The Methodological Challenges Related to Assess the Outcomes of Knowledge Management Initiatives: The Case of Communities of Practice [Communication écrite]. 15th IFIP WG 5.1 International Conference (PLM 2018), Turin, Italy. Publié dans IFIP advances in information and communication technology. Lien externe
Moeuf, A., Pellerin, R., Lamouri, S., Geraldes, A., & Tobon-Valencia, E. (juin 2018). Identification des risques, opportunités et facteurs critiques de succès de l'industrie 4.0 pour la performance industrielle des PME [Communication écrite]. 2e Conférence Internationale de Modélisation, Optimisation et Simulation (MOSIM 2018), Toulouse, France. Lien externe
Morency, C., Trépanier, M., Saunier, N., Verreault, H., & Bourdeau, J.-S. (septembre 2017). Using 5 parallel passive data streams to report on a wide range of mobility options [Communication écrite]. 11th International Conference on Transport Survey Methods, Estérel, Québec (11 pages). Publié dans Transportation Research Procedia, 32. Disponible
Morinc, S., Robert, J.-M., & Gabora, L. (juin 2018). A measured educational experience developing creativity with graduate and undergraduate engineering students [Communication écrite]. Canadian Engineering Education Association (CEEA) Conference, Vancouver, BC, Canada (8 pages). Publié dans Proceedings of the Canadian Engineering Education Association (CEEA). Lien externe
Mustapha, K., Gilli, Q., Frayret, J.-M., & Lahrichi, N. (juillet 2016). Agent-based modelling and simulation framework for health care [Communication écrite]. 6th International Conference on Simulation and Modeling Methodologies,Technologies and Applications, (SIMULTECH 2016), Lisbon, Portugal. Lien externe
N'Dri, K. D., & Lefebvre, M. (juin 2018). Teaching differential equations online [Communication écrite]. International Workshop on New Horizons in Teaching Science, Messina, Italie (4 pages). Publié dans Atti della Accademia Peloritana dei Pericolanti - Classe di Scienze Fisiche, Matematiche e Naturali, 99(S1). Lien externe
Nagarajan, H. P. N., Mokhtarian, H., Jafarian, H., Prodhon, R., Hamedi, A., Tilouche, S., Coatanéa, É., & Nenchev, V. (août 2018). Knowledge-based optimization of artificial neural network topology for process modeling of fused deposition modeling [Communication écrite]. ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, (IDETC/CIE 2018), Québec, Québec. Lien externe
Nobari, A. H., St-Laurent, S., Thomas, Y., Bouchemit, A., & L'Espérance, G. (mai 2018). Performance of fine and ultra-fine lead-free powders for solder paste applications [Communication écrite]. 68th IEEE Electronic Components and Technology Conference (ECTC 2018), San Diego, CA. Lien externe
Olivier, P., Lodi, A., & Pesant, G. (juin 2018). A comparison of optimization methods for multi-objective constrained bin packing problems [Communication écrite]. 15th International Conference on Integration of Constraint Programming, Artificial Intelligence, and Operations Research (CPAIOR 2018), Delft, Netherlands. Lien externe
Ostermeyer, E., Danjou, C., Durupt, A., & Duigou, J. L. (juin 2018). An ontology-based framework for the management of machining information in a data mining perspective [Communication écrite]. 16th IFAC Symposium on Information Control Problems in Manufacturing (INCOM 2018), Bergamo, Italy. Publié dans IFAC-PapersOnLine, 51(11). Lien externe
Ostermeyer, E., Danjou, C., Durupt, A., & Le Duigou, J. (juin 2018). Un système à base de connaissances pour la gestion de données d'usinage dans une perspective de fouille de données [Communication écrite]. MUGV & Manufacturing'21 (MUGV 2018), Bordeaux, France. Non disponible
Pan, S., Akplogan, M., Létocart, L., Rousseau, L.-M., Touati, N., & Calvo, R. W. (juin 2018). A hybrid heuristic for multi-activity tour scheduling [Communication écrite]. 16th Cologne-Twente Workshop on Graphs and Combinatorial Optimization (CTW 2018), Paris, France. Lien externe
Rankohi, S., Bourgault, M., & Perrazzino, E. (juin 2018). Delta-Marriott hotel project: A case study of construction innovations in building a hotel project in Ontario, Canada [Communication écrite]. CSCE General Conference, Fredericton, NB, Canada. Lien externe
Robert, J.-M., Maldar, M., Taraghi, M., & Seffah, A. (août 2018). User Innovation, Lead Users and Crowdsourcing for the Design of New Products and Services: Why, What and How? [Communication écrite]. 20th Congress of the International Ergonomics Association (IEA 2018), Florence, Italie. Lien externe
Romer, M., Cire, A. A., & Rousseau, L.-M. (juin 2018). A local search framework for compiling relaxed decision diagrams [Communication écrite]. 15th International Conference on Integration of Constraint Programming, Artificial Intelligence, and Operations Research (CPAIOR 2018), Delft, Netherlands. Lien externe
Sharma, S., Bastien, G., & Gebai, M. (octobre 2018). Systems tracking and trace visualization lab - part I [Communication écrite]. 32nd Large Installation System Administration Conference, Nashville, TN, USA. Non disponible
Sinqueira, A. S., & Orban, D. (juillet 2018). A regularized interior-point method for constrained nonlinear least squares [Communication écrite]. 12th Brazilian Workshop on Continuous Optimization, Foz do Iguaçu, Brazil. Non disponible
Siqueira, A. S., & Orban, D. (juin 2018). Developing new optimization methods with packages from the JuliaSmoothOptimizers organisation [Communication écrite]. 2nd annual JuMP-Dev Workshop, Bordeaux, France (30 pages). Non disponible
Tahmooresnejad, L., & Beaudry, C. (septembre 2018). Insights into different economic value determinants of patents [Communication écrite]. 16th International Triple Helix Conference, Manchester, UK. Non disponible
Tobon Valencia, E., Lamouri, S., Pellerin, R., Dubois, P., & Moeuf, A. (juin 2018). The integration of ERP and inter-intra organizational information systems: A Literature Review [Communication écrite]. 16th IFAC Symposium on Information Control Problems in Manufacturing (INCOM 2018), Bergamo, Italy. Publié dans IFAC-PapersOnLine, 51(11). Lien externe
Wielinski, G., Trépanier, M., & Morency, C. (janvier 2018). Carsharing service adoption in a dual-mode setting: A station-based and free-floating case study [Communication écrite]. 97th Annual Meeting of the Transportation Research Board (TRB 2018), Washington, DC, United States (6 pages). Lien externe
Xu, C., Bouchemit, A., L'Espérance, G., Laberge Lebel, L., & Therriault, D. (mai 2018). 3D printing of metallic structures from a green ink [Communication écrite]. CSME International Congress, Toronto, Ontario, Canada. Lien externe
Pradinaud, C., Northey, S. A., Amor, B., Bare, J., Benini, L., Berger, M., Boulay, A.-M., Junqua, G., Lathuilliere, M., Margni, M., Motoshita, M., Niblick, B., Payen, S., Pfister, S., Quinteiro, P., Sonderegger, T., & Rosenbaum, R. (mai 2018). Adding the resource dimension to the WULCA framework on assessing freshwater use in LCA [Affiche]. ETAC Europe 28th Annual Meeting: Responsible and Innovative Research for Environmental Quality, Rome, Italy. Non disponible
Bernard, S. (juin 2018). Green designs for durable goods with partial commitment ability and technological progress [Résumé]. 52nd Annual Conference of the Canadian Economics Association (CEA), Montréal, Québec. Non disponible
Beaudry, C., & Dauphin-Pierre, S. (avril 2018). A look at the impact of the research intermediary operating in the ICT industry of the province of Quebec [Présentation]. Dans 5th annual Partnership Network Conference, Vancouver, BC, Canada. Lien externe
Beaudry, C., Bérubé, C., & Therrien, P. (juin 2018). Beyond the innovation obstacle paradox - The role of government support on helping firms overcome these obstacles and innovate [Présentation]. Dans Atelier sur l'enquête sur l'innovation et les stratégies d'entreprise de Statistique Canada, Montréal, Qc, Canada. Lien externe
Diehl, P., Prudhomme, S., & Lévesque, M. (janvier 2018). A review for benchmark experiments against peridynamic models [Présentation]. Dans Nonlocal Methods in Fracture, Austin, USA. Non disponible
Lefebvre, M. (mai 2018). An exact formula for the value of a portfolio at a random final time [Présentation]. Dans 61st Meeting of EURO Working Group for Commodities and Financial Modelling, Kaunas, Lithuania. Non disponible
Lefebvre, M. (août 2018). Exact solutions to an optimal control problem for an Ornstein-Uhlenbeck process with random parameters [Présentation]. Dans 6th Palestinian Conference on Modern Trends in Mathematics and Physics, Tulkarm, Palestine. Non disponible
Lefebvre, M. (décembre 2018). Modelling and forecasting temperature and precipitation in Italy [Présentation]. Dans Scientific Meeting of the Academia Peloritana dei Pericolanti, Classe di Scienze Fisiche, Matematiche e Naturali, Messina, Italie. Non disponible
Lefebvre, M., & Moutassim, A. (octobre 2018). Optimal control problems for diffusion processes with random parameters [Présentation]. Dans 2nd International Conference on Applied Mathematics and Numerical Methods (ICAMNM 2018), Craiova, Roumanie. Non disponible
Pellerin, R. (juillet 2018). The contribution of Industry 4.0 in creating agility within SMEs [Présentation]. Dans International Research Meeting in Business and Management (IRMBAM-2018), Nice, France. Non disponible
Bekkali, M. (2018). Analyses-diagnostics des vulnérabilités d'une organisation face aux utilisations des technologies de l'information et de communication [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Bouchardy, A. (2018). L'innovation ouverte dans l'industrie automobile en France et au Canada [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Camiat, F. (2018). Optimisation d'horaires axée sur la productivité des médecins aux urgences [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Chénier, É. (2018). Agrégation d'un grand nombre de petites charges en incluant l'incertitude de la disponibilité des ressources [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Côté-Massicotte, J. (2018). Affinement de modèles substituts en optimisation de boîtes noires et en optimisation sans dérivées [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Dahito, M.-A. (2018). La méthode des résidus conjugués pour calculer les directions en optimisation continue [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Dubois, E. (2018). Comparaison de stratégies d'organisation du transport de patients inter-établissements à Montréal à l'aide d'un modèle de simulation [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Jemai, L. (2018). Planification de réseaux hyperconnectés et mutualisés de transport urbain de marchandises [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
K. Bourque, M. (2018). Reformulation du problème d'estimation des paramètres d'un réseau électrique [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Khanidahaj, Z. (2018). Deep Learning and Reinforcement Learning for Inventory Control [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Lakiza, V. (2018). Relationships Between Performance Measurement Systems, Intrapreneurial Culture and Innovation Capabilities: A Longitudinal Field Case Study [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Laprise, G. (2018). Nouveaux estimateurs pour l'optimisation des systèmes automatisés de négociation d'options [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Marques, R. (2018). Système de produits et services basés sur l'internet des objets : conception et implantation pilote dans une station-service [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Mhamdi, W. (2018). Génération de mises combinatoires dans les enchères de transport en univers incertain [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Moghimi, M. (2018). XCS Algorithms for a Linear Combination of Discounted and Undiscounted Reward Markovian Decision Processes [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Morin, G. (2018). Réduction de bruit dans les signaux numériques via une analyse statistique locale et une estimation globale [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Nassif, G. (2018). Data Analysis From an Internet Of Things System in a Gas Station Convenience Store [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Plamondon-Tremblay, T. (2018). La prise en compte de l'analyse des dépendances aux ressources dans la planification de la continuité des opérations [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Poissant, C. (2018). Exploitation d'une structure monotone en recherche directe pour l'optimisation de boîtes grises [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Saadi, C. (2018). Ré-optimisation de l'horaire de travail d'employés en surtemps [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Sadeghi, A. (2018). Agent-Based Model of Fab Lab Communities [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Sarrazin-Mc Cann, L. A. (2018). Opportunisme et ordonnancement en optimisation sans dérivées [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Schmidt, A. (2018). On Delamination Crack Detection in Carbon Fiber Reinforced Polymers Using Electrical Impedance Tomography and Supervised Learning [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Tageddine, D. (2018). Conception d'un schéma adaptatif d'intégration en temps appliqué à la discrétisation par éléments finis des équations de Maxwell pour l'étude de la supraconductivité [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Tounsi, W. (2018). Comparaison des approches DDMRP et EOQ : Modélisation et simulation d'un cas d'étude [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Viallard, A. (2018). Méthodologie pour l'étude de l'évolution des comportements des voyageurs de transport collectif urbain [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Weller, J.-N. (2018). Predicting Next Kidney Offer for a Kidney Transplant Candidate Declining Current One [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Amaioua, N. (2018). Modèles quadratiques et décomposition parallèle pour l'optimisation sans dérivées [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Barbier, T. (2018). Optimisation et simulation pour la gestion de disponibilite sous comportement d'achat [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Dauphin-Pierre, S. (2018). La relation entre intermédiaires de recherche et PME, analyse et impacts [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Elsheikh, A. (2018). Analytics of Sequential Time Data from Physical Assets [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Farnia, F. (2018). Three Essays on the Impact of Non-Tariff Barriers and Voluntary Environmental Standards on International Trade [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Foutlane, O. (2018). Méthodes de décomposition pour la parallélisation du simplexe en nombres entiers [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Himmich, I. (2018). Méthodes primales pour résoudre le problème de plus court chemin avec contraintes de ressources [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Karimi, E. (2018). Integrative Predictive Support Systems for Hospital's Resource Planning and Scheduling [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Kergrene, K. (2018). A goal-oriented finite element method and its extension to pgd reduced-order modeling [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Keutchayan, J. (2018). Approximation d'espérances conditionnelles guidée par le problème en optimisation stochastique multi-étapes [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Law-Kam-Cio, Y.-M. (2018). Méthode de Galerkin discontinue pour la discrétisation par Éléments finis des équations de maxwell pour la modélisation de problèmes d'électromagnétisme en basses fréquences [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Lyane, K. (2018). La RSE au sein du secteur aéronautique au Québec : une perspective de la complexité institutionnelle [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Marchand, A. (2018). Optimisation de la planification court-terme d'un système de production hydroélectrique de grande taille [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Murray, P. (2018). Methodology and Tools to Make Predictions from Sporadic Delivery Data [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Patouillard, L. (2018). Régionalisation en analyse du cycle de vie : Analyse conséquentielle des filières alternatives pour le transport en france [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Rahmaniani, R. (2018). On High-Performance Benders-Decomposition-Based Exact Methods with Application to Mixed-Integer and Stochastic Problems [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Rodrigues de Sousa, V. J. (2018). Global Optimization of the Maximum K-Cut Problem [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Rodríguez Sarasty, J. A. (2018). Mixed-Integer Programming Approaches for Hydropower Generator Maintenance Scheduling [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Wielinski, G. (2018). Modélisation des membres et de leur comportement dans un écosystème de services d'autopartage à Montréal [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Boisvert, M., L'Espérance, G., Beaulieu, P., & Christopherson, D. B. J. (2018). Free graphite containing powders. (Demande de brevet no US20180105906). Lien externe
Beaudry, C., Mouton, J., & Prozesky, H. (2018). The next generation of scientists in Africa. Disponible
Blouw, M., Barreto, L., Beaudry, C., Brooks, D., Jean, M., Jessop, P., Lajeunesse, C., Liang, S., Luke, R., Thompson, J. M., Whitelaw, A., & Wolfe, D. A. (2018). Competing in a global innovation economy : the current state of R&D in Canada. Lien externe
Blouw, M., Barreto, L., Beaudry, C., Brooks, D., Jean, M., Jessop, P., Lajeunesse, C., Liang, S., Luke, R., Thompson, J. M., Whitelaw, A., & Wolfe, D. A. (2018). Rivaliser dans une économie mondiale axée sur l'innovation : l'état de la R-D au Canada. Lien externe
Dagdougui, H., Sacile, R., Bersani, C., & Ouammi, A. (2018). Hydrogen infrastructure for energy applications: production, storage, distribution and safety. Lien externe
Joanis, M., & Montmarquette, C. (2018). Éducation et capital humain. Lien externe
Armellini, F., Beaudry, C., & Mahon, M. (2018). The influence of the NIH and NSH syndromes on the adoption of open innovation in the Canadian aerospace sector. Dans Gråsjö, U., Karlsson, C., & Bernhard, I. (édit.), Geography, open innovation and entrepreneurship (p. 108-139). Lien externe
Barros Telles Do Carmo, B., Margni, M., & Baptiste, P. (2018). Propagating uncertainty in life cycle sustainability assessment into decision-making problems: A multiple criteria decision aid approach. Dans Benetto, E., Gericke, K., & Guiton, M. (édit.), Designing sustainable technologies, products and policies (p. 317-326). Lien externe
Bjorn, A., & Hauschild, M. Z. (2018). Cradle to cradle and LCA. Dans Life Cycle Assessment (p. 605-631). Lien externe
Bjorn, A., & Hauschild, M. Z. (2018). LCA cookbook. Dans Life Cycle Assessment (p. 963-1048). Lien externe
Bjorn, A., & Moltesen, A. (2018). LCA and Sustainability. Dans Life Cycle Assessment (p. 43-45). Lien externe
Bjorn, A., Laurent, A., & Owsianiak, M. (2018). Report Template. Dans Life Cycle Assessment (p. 1051-1058). Lien externe
Bjørn, A., Laurent, A., Owsianiak, M., & Olsen, S. I. (2018). Goal definition. Dans Life Cycle Assessment (p. 67-74). Lien externe
Bjorn, A., Moltesen, A., Laurent, A., Owsianiak, M., Corona, A., Birkved, M., & Hauschild, M. (2018). Life cycle inventory analysis. Dans Life Cycle Assessment (p. 117-165). Lien externe
Bjorn, A., Owsianiak, M., Laurent, A., Olsen, S. I., Corona, A., & Hauschild, M. Z. (2018). Scope definition. Dans Life Cycle Assessment (p. 75-116). Lien externe
Bjørn, A., Owsianiak, M., Molin, C., & Hauschild, M. Z. (2018). LCA history. Dans Life Cycle Assessment (p. 17-20). Lien externe
Bjorn, A., Owsianiak, M., Molin, C., & Laurent, A. (2018). Main characteristics of LCA. Dans Life Cycle Assessment (p. 9-16). Lien externe
Dagdougui, H., Sacile, R., Bersani, C., & Ouammi, A. (2018). Deployment of a Hydrogen Supply Chain. Dans Hydrogen Infrastructure for Energy Applications (p. 53-93). Lien externe
Dagdougui, H., Sacile, R., Bersani, C., & Ouammi, A. (2018). Network Planning of Hydrogen Supply Chain. Dans Hydrogen Infrastructure for Energy Applications (p. 95-125). Lien externe
Henkelman, G., Jónsson, H., Lelièvre, T., Mousseau, N., & Voter, A. F. (2018). Long-Timescale Simulations: Challenges, Pitfalls, Best Practices, for Development and Applications. Dans Andreoni, W., & Yip, S. (édit.), Handbook of Materials Modeling : Methods, Theory and Modeling (10 pages). Lien externe
Héroux-Vaillancourt, M., & Beaudry, C. (2018). Are the most innovative Canadian nanotechnology-related firms also the most open? Dans Gråsjö, U., Karlsson, C., & Bernhard, I. (édit.), Geography, open innovation and entrepreneurship (p. 140-189). Lien externe
Lahrichi, N., Rousseau, L.-M., & Van Hoeve, W.-J. (2018). Residential Care. Dans Handbook of Healthcare Analytics (p. 257-285). Lien externe
Lonca, G., Muggéo, R., Tétreault-Imbeault, H., Bernard, S., & Margni, M. (2018). A bi-dimensional assessment to measure the performance of circular economy: A case study of tires end-of-life management. Dans Benetto, E., Gericke, K., & Guiton, M. (édit.), Designing Sustainable Technologies, Products and Policies (p. 33-42). Disponible
Owsianiak, M., Bjorn, A., Bugge, H. B., Carvalho, S. M., Jebahar, L., Rasmussen, J., White, C. M., & Olsen, S. I. (2018). Illustrative case study : life cycle assessment of four window alternatives. Dans Life Cycle Assessment (p. 1059-1146). Lien externe
Owsianiak, M., Bjørn, A., Laurent, A., Molin, C., & Ryberg, M. W. (2018). LCA applications. Dans Life Cycle Assessment (p. 31-41). Lien externe
Scremin, L., Armellini, F., Brun, A., Solar-Pelletier, L., & Beaudry, C. (2018). Towards a framework for assessing the maturity of manufacturing companies in industry 4.0 adoption. Dans Analyzing the impacts of industry 4.0 in modern business environments (p. 224-254). Lien externe
