 | Monter d'un niveau |
Pierre CarreauDépartement de génie chimique
Voir sa fiche dans le Répertoire des Expertises de Polytechnique Montréal
Réseau de collaborationCe graphique trace les liens entre tous les collaborateurs des publications de {} figurant sur cette page.
Chaque lien représente une collaboration sur la même publication. L'épaisseur du lien représente le nombre de collaborations.
Utilisez la molette de la souris ou les gestes de défilement pour zoomer à l'intérieur du graphique.
Vous pouvez cliquer sur les noeuds et les liens pour les mettre en surbrillance et déplacer les noeuds en les glissant.
Enfoncez la touche "Ctrl" ou la touche "⌘" en cliquant sur les noeuds pour ouvrir la liste des publications de cette personne.
Mohammadi, M., Nofar, M., & Carreau, P. (2024). Properties of blends of amorphous and semicrystalline <scp>PLAs</scp> containing multiwalled carbon nanotubes. The Canadian Journal of Chemical Engineering, 25463 (12 pages). Disponible
Randall, J., Flodquist, M., Schroeder, J., Valentine, J. R., Owusu, O., McCarthy, K., Weed, J., Hennen, J., Heuzey, M.-C., & Carreau, P. (2023). Comparing the structural, thermal, and rheological properties of poly(meso-lactide) to poly(l-lactide) and poly(rac-lactide). Macromolecules, 57(6), 2715-2728. Lien externe
Mousavi, Z., Heuzey, M.-C., & Carreau, P. (2023). Compatibilized polylactide/polyamide 11 blends containing multiwall carbon nanotubes: Morphology, rheology, electrical and mechanical properties. Polymer, 276, 13 pages. Lien externe
Mohammadi, M., Li, Y., Randall, J., Nofar, M., Heuzey, M.-C., & Carreau, P. (2023). Effects of molecular weight, stereo configuration of PLA, and processing on the dispersion of multiwalled carbon nanotubes and properties of corresponding nanocomposites. Canadian Journal of Chemical Engineering, 101(10), 5729-5742. Lien externe
Mousavi, Z., Heuzey, M.-C., Randall, J., & Carreau, P. (2022). Enhanced properties of polylactide/polyamide 11 blends by reactive compatibilization. Canadian Journal of Chemical Engineering, 100(9), 2475-2490. Lien externe
Mehrotra, A. K., Soares, J. B. P., Nandakumar, K., Carreau, P., Epstein, N., & Patience, G. S. (2022). A perspective on The Canadian Journal of Chemical Engineering commemorating its 100th volume: 1929-2021. The Canadian Journal of Chemical Engineering, 100(9), 1983-2010. Lien externe
Ghanbari, A., Heuzey, M.-C., & Carreau, P. (2022). Polyethylene terephthalate/organoclay nanocomposites: Improvement of morphology and viscoelastic properties by using a chain-extender. Applied Clay Science, 225, 106551 (9 pages). Lien externe
Santoni, A., Guo, M. C., Heuzey, M.-C., & Carreau, P. (2022). Surface Defects of TPO Injected Foam Parts for Automotive Applications. International Polymer Processing, 22(2), 204-212. Lien externe
Mohammadi, M., Heuzey, M.-C., Carreau, P., & Taguet, A. (2021). Morphological and rheological properties of PLA, PBAT, and PLA/PBAT blend nanocomposites containing CNCs. Nanomaterials, 11(4), 857 (20 pages). Disponible
Ghanbari, A., Heuzey, M.-C., & Carreau, P. (2021). The Effect of Nanosilicates on the Performance of Polyethylene Terephthalate Films Prepared by Twin-Screw Extrusion. International Polymer Processing, 36(4), 358-366. Lien externe
Mohammadi, M., Heuzey, M.-C., Carreau, P., & Taguet, A. (2021). Interfacial localization of CNCs in PLA/PBAT blends and its effect on rheological, thermal, and mechanical properties. Polymer, 233, 12 pages. Lien externe
Mohammadi, M., Heuzey, M.-C., & Carreau, P. (2021). Morphological, thermal, and mechanical properties of cellulose nanocrystal reinforced poly(lactic acid) and poly(butylene adipate-co-terephthalate): A comparative study on common and novel solvent casting methods. Polymer Composites, 42(12), 6688-6703. Lien externe
Nofar, M., Mohammadi, M., & Carreau, P. (2021). Nanoclay Migration and the Rheological Response of PBAT/LDPE Blends. International Polymer Processing, 36(3), 287-296. Lien externe
Wang, C.-S., Chapelle, G., Carreau, P., & Heuzey, M.-C. (2021). Prediction of sag resistance in paints using rheological measurements. Progress in Organic Coatings, 153, 7 pages. Lien externe
Mousavi, Z., Heuzey, M.-C., Kamal, M. R., Flahaut, E., & Carreau, P. (2021). Rheological, electrical, and dynamic thermomechanical properties: Comparison between multiwall and double-wall carbon nanotubes in polylactide and polyamide 11. Physics of Fluids, 33(11), 13 pages. Lien externe
Nofar, M., Mohammadi, M., & Carreau, P. (2021). Super enhancement of rheological properties of amorphous PLA through generation of a fiberlike oriented crystal network. Journal of Rheology, 65(4), 493-505. Lien externe
Wang, C.-S., Virgilio, N., Carreau, P., & Heuzey, M.-C. (2021). Understanding the Effect of Conformational Rigidity on Rheological Behavior and Formation of Polysaccharide-Based Hybrid Hydrogels. Biomacromolecules, 22(9), 4016-4026. Lien externe
Dunlop, M. J., Clemons, C., Reiner, R., Sabo, R., Agarwal, U. P., Bissessur, R., Sojoudiasli, H., Carreau, P., & Acharya, B. (2020). Towards the scalable isolation of cellulose nanocrystals from tunicates. Scientific Reports, 10(1), 19090 (13 pages). Disponible
Bruel, C., Queffeulou, S., Carreau, P., Tavares, J. R., & Heuzey, M.-C. (2020). Orienting Cellulose Nanocrystal Functionalities Tunes the Wettability of Water-Cast Films. Langmuir, 36(41), 12179-12189. Disponible
Nofar, M., Heuzey, M.-C., Carreau, P., & Kamal, M. R. (2020). Nanoparticle Interactions and Molecular Relaxation in PLA/PBAT/Nanoclay Blends. Experimental results, 1(e47), 12 pages. Disponible
Mohammadi, M., Bruel, C., Heuzey, M.-C., & Carreau, P. (2020). CNC dispersion in PLA and PBAT using two solvents: morphological and rheological properties. Cellulose, 27(17), 9877-9892. Lien externe
Nofar, M., Mohammadi, M., & Carreau, P. (2020). Effect of TPU hard segment content on the rheological and mechanical properties of PLA/TPU blends. Journal of Applied Polymer Science, 137(45), 49387 (11 pages). Lien externe
Ghanbari, A., Mousavi, Z., Heuzey, M.-C., Patience, G. S., & Carreau, P. (2020). Experimental methods in chemical engineering: Rheometry. Canadian Journal of Chemical Engineering, 98(7), 1456-1470. Lien externe
Bruel, C., Davies, T. S., Carreau, P., Tavares, J. R., & Heuzey, M.-C. (2020). Self-assembly behaviors of colloidal cellulose nanocrystals: A tale of stabilization mechanisms. Journal of Colloid and Interface Science, 574, 399-409. Lien externe
Bruel, C., Tavares, J. R., Carreau, P., & Heuzey, M.-C. (2019). The structural amphiphilicity of cellulose nanocrystals characterized from their cohesion parameters. Carbohydrate Polymers, 205, 184-191. Disponible
Khandal, D., Riedl, B., Tavares, J. R., Carreau, P., & Heuzey, M.-C. (2019). Tailoring cellulose nanocrystals rheological behavior in aqueous suspensions through surface functionalization with polyethyleneimine. Physics of Fluids, 31(2), 021207. Disponible
Bagheriasl, D., Safdari, F., Carreau, P., Dubois, C., & Riedl, B. (2019). Development of cellulose nanocrystal-reinforced polylactide: A comparative study on different preparation methods. Polymer Composites, 40(S1), E342-E349. Lien externe
Nofar, M., Sacligil, D., Carreau, P., Kamal, M. R., & Heuzey, M.-C. (2019). Poly (lactic acid) blends: processing, properties and applications. International Journal of Biological Macromolecules, 125, 307-360. Lien externe
Bruel, C., Beuguel, Q., Tavares, J. R., Carreau, P., & Heuzey, M.-C. (2018). The apparent structural hydrophobicity of cellulose nanocrystals. J-FOR The Journal of Science and Technology for Forest Products and Processes, 7(4), 13-23. Disponible
Beuguel, Q., Bagheriasl, D., Bruel, C., Tavares, J. R., Carreau, P., & Heuzey, M.-C. (2018). Comportement rhéologique à l'état fondu de nanocomposites à base de nanocristaux de cellulose (CNCs). Rhéologie (34), 10-16. Disponible
Bagheriasl, D., Carreau, P., Riedl, B., & Dubois, C. (2018). Enhanced properties of polylactide by incorporating cellulose nanocrystals. Polymer Composites, 39(8), 2685-2694. Lien externe
Sojoudiasli, H., Heuzey, M.-C., & Carreau, P. (2018). Mechanical and morphological properties of cellulose nanocrystal-polypropylene composites. Polymer Composites, 39(10), 3605-3617. Lien externe
Zakeri, B., Khandal, D., Beuguel, Q., Riedl, B., Tavares, J. R., Carreau, P., & Heuzey, M.-C. (2018). Non-covalent surface modification of cellulose nanocrystals by polyethyleneimine. J-FOR The Journal of Science and Technology for Forest Products and Processes, 7(4), 6-12. Disponible
Beuguel, Q., Tavares, J. R., Carreau, P., & Heuzey, M.-C. (2018). Rheological behavior of cellulose nanocrystal suspensions in polyethylene glycol. Journal of Rheology, 62(2), 607-618. Disponible
Safdari, F., Bagheriasl, D., Carreau, P., Heuzey, M.-C., & Kamal, M. R. (2018). Rheological, mechanical, and thermal properties of polylactide/cellulose nanofiber biocomposites. Polymer Composites, 39(5), 1752-1762. Lien externe
Beuguel, Q., Tavares, J. R., Carreau, P., & Heuzey, M.-C. (2018). Ultrasonication of spray- and freeze-dried cellulose nanocrystals in water. Journal of Colloid and Interface Science, 516, 23-33. Disponible
Sheikhi, A., Yang, H., Carreau, P., & van de Ven, T. G. M. (2017). Colloidal nano-toolbox for molecularly regulated polymerization: chemorheology over 6 decades of viscoelasticity. Materials Horizons, 4(6), 1165-1170. Lien externe
Lenfant, G., Heuzey, M.-C., van de Ven, T. G. M., & Carreau, P. (2017). A comparative study of ECNC and CNC suspensions: effect of salt on rheological properties. Rheologica Acta, 56(1), 51-62. Lien externe
Safdari, F., Carreau, P., Heuzey, M.-C., & Kamal, M. R. (2017). Effects of poly(ethylene glycol) on the morphology and properties of biocomposites based on polylactide and cellulose nanofibers. Cellulose, 24(7), 2877-2893. Lien externe
Safdari, F., Carreau, P., Heuzey, M.-C., Kamal, M. R., & Sain, M. M. (2017). Enhanced properties of poly(ethylene oxide)/cellulose nanofiber biocomposites. Cellulose, 24(2), 755-767. Lien externe
Lenfant, G., Heuzey, M.-C., van de Ven, T. G. M., & Carreau, P. (2017). Gelation of crystalline nanocellulose in the presence of hydroxyethyl cellulose. Canadian Journal of Chemical Engineering, 95(10), 1891-1900. Lien externe
Nofar, M., Tabatabaei, A., Sojoudiasli, H., Park, C. B., Carreau, P., Heuzey, M.-C., & Kamal, M. R. (2017). Mechanical and bead foaming behavior of PLA-PBAT and PLA-PBSA blends with different morphologies. European Polymer Journal, 90, 231-244. Lien externe
Sojoudiasli, H., Heuzey, M.-C., Carreau, P., & Riedl, B. (2017). Rheological behavior of suspensions of modified and unmodified cellulose nanocrystals in dimethyl sulfoxide. Rheologica Acta, 56(7-8), 673-682. Lien externe
Nofar, M., Heuzey, M.-C., Carreau, P., Kamal, M. R., & Randall, J. (2016). Coalescence in PLA-PBAT blends under shear flow: Effects of blend preparation and PLA molecular weight. Journal of Rheology, 60(4), 637-648. Lien externe
Nofar, M., Heuzey, M.-C., Carreau, P., & Kamal, M. R. (2016). Effects of nanoclay and its localization on the morphology stabilization of PLA/PBAT blends under shear flow. Polymer, 98, 353-364. Lien externe
Natale, G., Ausias, G., Ferec, J., Heuzey, M.-C., & Carreau, P. (2016). Modeling interactions in carbon nanotube suspensions: Transient shear flow. Journal of Rheology, 60(6), 1069-1083. Lien externe
Shahverdi-Shahraki, K., Ghosh, T., Mahajan, K., Ajji, A., & Carreau, P. (2016). Morphology and thermal properties of poly(ethylene terephthalate)-modified kaolin nanocomposites. Polymer Composites, 37(5), 1443-1452. Lien externe
Saffar, A., Jalali Dil, E., Carreau, P., Ajji, A., & Kamal, M. R. (2016). Phase behavior of binary blends of PP/PP‐g‐AA: limitations of the conventional characterization techniques. Polymer International, 65(5), 508-515. Lien externe
Maani, A., & Carreau, P. (2016). Rheological and morphological properties of thermoplastic olefin blends containing nanosilica. Journal of Non-Newtonian Fluid Mechanics, 233, 95-106. Lien externe
Najafi Chaloupli, N., Heuzey, M.-C., Carreau, P., & Therriault, D. (2015). Quiescent and shear-induced crystallization of linear and branched polylactides. Rheologica Acta, 54(9-10), 831-845. Disponible
Shahverdi-Shahraki, K., Ghosh, T., Mahajan, K., Ajji, A., & Carreau, P. (2015). Effect of dry grinding on chemically modified kaolin. Applied Clay Science, 105-106, 100-106. Lien externe
Kolahchi, A. R., Ajji, A., & Carreau, P. (2015). Enhancing Hydrophilicity of Polyethylene Terephthalate Surface Through Melt Blending. Polymer Engineering and Science, 55(2), 349-358. Lien externe
Nofar, M., Maani, A., Sojoudi, H., Heuzey, M.-C., & Carreau, P. (2015). Interfacial and rheological properties of PLA/PBAT and PLA/PBSA blends and their morphological stability under shear flow. Journal of Rheology, 59(2), 317-333. Lien externe
Lenfant, G., Heuzey, M.-C., van de Ven, T. G. M., & Carreau, P. (2015). Intrinsic viscosity of suspensions of electrosterically stabilized nanocrystals of cellulose. Cellulose, 22(2), 1109-1122. Lien externe
Najafi, N., Heuzey, M.-C., Carreau, P., Therriault, D., & Park, C. B. (2015). Mechanical and morphological properties of injection molded linear and branched-polylactide (PLA) nanocomposite foams. European Polymer Journal, 73, 455-465. Lien externe
Jalali Dil, E., Carreau, P., & Favis, B. D. (2015). Morphology, miscibility and continuity development in poly(lactic acid)/poly(butylene adipate-co-terephthalate) blends. Polymer, 68, 202-212. Lien externe
Shahverdi-Shahraki, K., Ghosh, T., Mahajan, K., Ajji, A., & Carreau, P. (2015). Polyethylene terephthalate/calcined kaolin composites: Effect of uniaxial stretching on the properties. Polymer Engineering and Science, 55(8), 1767-1775. Lien externe
Bagheriasl, D., Carreau, P., Dubois, C., & Riedl, B. (2015). Properties of polypropylene and polypropylene/poly(ethylene-co-vinyl alcohol) blend/CNC nanocomposites. Composites Science and Technology, 117, 357-363. Lien externe
Natale, G., Reddy, N. K., Ausias, G., Ferec, J., Heuzey, M.-C., & Carreau, P. (2015). Rheo-optical response of carbon nanotube suspensions. Journal of Rheology, 59(2), 499-524. Lien externe
Saffar, A., Tabatabaei, S. H., Carreau, P., Ajji, A., & Kamal, M. R. (2015). Rheology of PP/PP-g-MA and PP/PP-g-AA Blends and Incidence on Orientation and Crystalline Structure of Their Cast Films. Industrial & Engineering Chemistry Research, 54(43), 10787-10795. Lien externe
Najafi Chaloupli, N., Heuzey, M.-C., Carreau, P., Therriault, D., & Park, C. B. (2014). Rheological and foaming behavior of linear and branched polylactides. Rheologica Acta, 53(10-11), 779-790. Disponible
Abbasi, S., Derdouri, A., & Carreau, P. (2014). Carbon nanotube conductive networks through the double percolation concept in polymer systems. International Polymer Processing, 29(1), 13-27. Lien externe
Saffar, A., Carreau, P., Ajji, A., & Kamal, M. R. (2014). Development of polypropylene microporous hydrophilic membranes by blending with PP-g-MA and PP-g-AA. Journal of Membrane Science, 462, 50-61. Lien externe
Dini, M., Mousavand, T., Carreau, P., Kamal, M. R., & Ton-That, M.-T. (2014). Effect of water-assisted extrusion and solid-state polymerization on the microstructure of PET/Clay nanocomposites. Polymer Engineering and Science, 54(8), 1723-1736. Lien externe
Keshtkar, M., Nofar, M., Park, C. B., & Carreau, P. (2014). Extruded PLA/clay nanocomposite foams blown with supercritical CO 2. Polymer, 55(16), 4077-4090. Lien externe
Meng, Q., Heuzey, M.-C., & Carreau, P. (2014). Hierarchical Structure and Physicochemical Properties of Plasticized Chitosan. Biomacromolecules, 15(4), 1216-1224. Lien externe
Saffar, A., Carreau, P., Kamal, M. R., & Ajji, A. (2014). Hydrophilic modification of polypropylene microporous membranes by grafting TiO2 nanoparticles with acrylic acid groups on the surface. Polymer, 55(23), 6069-6075. Lien externe
Saffar, A., Ajji, A., Carreau, P., & Kamal, M. R. (2014). The impact of new crystalline lamellae formation during annealing on the properties of polypropylene based films and membranes. Polymer Engineering and Science, 55(14), 3156-3167. Lien externe
Saffar, A., Carreau, P., Ajji, A., & Kamal, M. R. (2014). Influence of Stretching on the Performance of Polypropylene-Based Microporous Membranes. Industrial & Engineering Chemistry Research, 53(36), 14014-14021. Lien externe
Dini, M., Mousavand, T., Carreau, P., Kamal, M. R., & Ton-That, M.-T. (2014). Microstructure and properties of poly(ethylene terephthalate)/organoclay nanocomposites prepared by water-assisted extrusion: Effect of organoclay concentration. Polymer Engineering and Science, 54(8), 1879-1892. Lien externe
Natale, G., Heuzey, M.-C., Carreau, P., Ausias, G., & Ferec, J. (2014). Rheological modeling of carbon nanotube suspensions with rod-rod interactions. AICHE Journal, 60(4), 1476-1487. Lien externe
Sojoudiasli, H.;., Carreau, P., & Heuzey, M.-C. (2014). Rheological, morphological and mechanical properties of flax fiber polypropylene composites: influence of compatibilizers. Cellulose, 21(5), 3797-3812. Lien externe
Dini, M., Carreau, P., Kamal, M. R., Ton-That, M.-T., & Esmaeili, B. (2014). Solid-state polymerization of poly(ethylene terephthalate): Effect of organoclay concentration. Polymer Engineering and Science, 54(12), 2925-2937. Lien externe
Kolahchi, A. R., Ajji, A., & Carreau, P. (2014). Surface Morphology and Properties of Ternary Polymer Blends: Effect of the Migration of Minor Components. Journal of Physical Chemistry B, 118(23), 6316-6323. Lien externe
Kolahchi, A. R., Carreau, P., & Ajji, A. (2014). Surface Roughening of PET Films through Blend Phase Coarsening. ACS Applied Materials & Interfaces, 6(9), 6415-6424. Lien externe
Najafi, N., Heuzey, M.-C., & Carreau, P. (2013). Crystallization behavior and morphology of polylactide and PLA/clay nanocomposites in the presence of chain extenders. Polymer Engineering and Science, 53(5), 1053-1064. Lien externe
Maani, A., Naguib, H. E., Heuzey, M.-C., & Carreau, P. (2013). Foaming behavior of microcellular thermoplastic olefin blends. Journal of Cellular Plastics, 49(3), 223-244. Lien externe
Esmaeili, B., Dubois, C., Carreau, P., & Heuzey, M.-C. (2013). In situ polymerization of PET in the presence of pristine and organo-modified clays. International Polymer Processing, 28(3), 331-340. Lien externe
Ghanbari, A., Heuzey, M.-C., Carreau, P., & Ton-That, M.-T. (2013). Morphological and Rheological Properties of Pet/Clay Nanocomposites. Rheologica Acta, 52(1), 59-74. Lien externe
Ghanbari, A., Heuzey, M.-C., Carreau, P., & Ton-That, M.-T. (2013). Morphology and properties of polymer/organoclay nanocomposites based on poly(ethylene terephthalate) and sulfopolyester blends. Polymer International, 62(3), 439-448. Lien externe
Ghanbari, A., Heuzey, M.-C., Carreau, P., & Ton-That, M. T. (2013). A novel approach to control thermal degradation of PET/organoclay nanocomposites and improve clay exfoliation. Polymer, 54(4), 1361-1369. Lien externe
Najafi, N., Heuzey, M.-C., Carreau, P., & Wood-Adams, P. M. (2012). Control of Thermal Degradation of Polylactide (Pla)-Clay Nanocomposites Using Chain Extenders. Polymer Degradation and Stability, 97(4), 554-565. Lien externe
Meng, Q., Heuzey, M.-C., & Carreau, P. (2012). Control of Thermal Degradation of Polylactide/Clay Nanocomposites During Melt Processing by Chain Extension Reaction. Polymer Degradation and Stability, 97(10), 2010-2020. Lien externe
Khalkhal, F., & Carreau, P. (2012). Critical Shear Rates and Structure Build-up at Rest in Mwcnt Suspensions. Journal of Non-Newtonian Fluid Mechanics, 171, 56-66. Lien externe
Meng, Q.-K., Heuzey, M.-C., & Carreau, P. (2012). Effects of a multifunctional polymeric chain extender on the properties of polylactide and polylactide/clay nanocomposites. International Polymer Processing, 27(5), 505-516. Lien externe
Ghasemi, H., Carreau, P., & Kamal, M. R. (2012). Isothermal and Non-Isothermal Crystallization Behavior of Pet Nanocomposites. Polymer Engineering and Science, 52(2), 372-384. Lien externe
Shahbikian, S., Carreau, P., Heuzey, M.-C., Ellul, M. D., Cheng, J., Shirodkar, P., & Nadella, H. P. (2012). Morphology Development of Epdm/Pp Uncross-Linked/Dynamically Cross-Linked Blends. Polymer Engineering and Science, 52(2), 309-322. Lien externe
Najafi, N., Heuzey, M.-C., & Carreau, P. (2012). Polylactide (Pla)-Clay Nanocomposites Prepared by Melt Compounding in the Presence of a Chain Extender. Composites Science and Technology, 72(5), 608-615. Lien externe
Ghasemi, H., Carreau, P., Kamal, M. R., & Tabatabaei, S. H. (2012). Properties of Pet/Clay Nanocomposite Films. Polymer Engineering and Science, 52(2), 420-430. Lien externe
Maani, A., Blais, B., Heuzey, M.-C., & Carreau, P. (2012). Rheological and Morphological Properties of Reactively Compatibilized Thermoplastic Olefin (TPO) Blends. Journal of Rheology, 56(3), 625-647. Lien externe
Maani, A., Heuzey, M.-C., & Carreau, P. (2011). Coalescence in thermoplastic olefin (TPO) blends under shear flow. Rheologica Acta, 50(11-12), 881-895. Lien externe
Khalkhal, F., Carreau, P., & Ausias, G. (2011). Effect of flow history on linear viscoelastic properties and the evolution of the structure of multiwalled carbon nanotube suspensions in an epoxy. Journal of Rheology, 55(1), 153-175. Lien externe
Xu, X. F., Ghanbari, A., Leelapornpisit, W., Heuzey, M.-C., & Carreau, P. (2011). Effect of ionomer on barrier and mechanical properties of PET/Organoclay nanocompoistes prepared by Melt compounding. International Polymer Processing, 26(4), 444-455. Lien externe
Rajabian, M., Naderi, G., Carreau, P., & Dubois, C. (2011). Erratum: Flow-induced particle orientation and rheological properties of suspensions of organoclays in thermoplastic resins. Journal of Polymer Science. Part B: Polymer Physics, 49(5), 398-398. Lien externe
Hadj Henni, A., Schmitt, C., Tremblay, M.-E., Hamdine, M., Heuzey, M.-C., Carreau, P., & Cloutier, G. (2011). Hyper-frequency viscoelastic spectroscopy of biomaterials. Journal of the Mechanical Behavior of Biomedical Materials, 4(7), 1115-1122. Lien externe
Shahbikian, S., Carreau, P., Heuzey, M.-C., Ellul, M. D., Nadella, H. P., Cheng, J., & Shirodkar, P. (2011). Morphology and rheology of nonreactive and reactive EPDM/PP blends in transient shear flow: Plasticized versus nonplasticized blends. Rubber Chemistry and Technology, 84(3), 325-353. Lien externe
Ghasemi, H., Carreau, P., Kamal, M. R., & Uribe-Calderon, J. (2011). Preparation and characterization of PET/clay nanocomposites by melt compounding. Polymer Engineering and Science, 51(6), 1178-1187. Lien externe
Abbasi, S., Derdouri, A., & Carreau, P. (2011). Properties of microinjection molding of polymer multiwalled carbon nanotube conducting composites. Polymer Engineering and Science, 51(5), 992-1003. Lien externe
Shahbikian, S., Carreau, P., Heuzey, M.-C., Ellul, M. D., Nadella, H. P., Cheng, J., & Shirodkar, P. (2011). Rheology/morphology relationship of plasticized and nonplasticized thermoplastic elastomers based on ethylene-propylene-diene-terpolymer and polypropylene. Polymer Engineering and Science, 51(11), 2314-2327. Lien externe
Pujari, S., Dougherty, L., Mobuchon, C., Carreau, P., Heuzey, M.-C., & Burghardt, W. R. (2011). X-ray scattering measurements of particle orientation in a sheared polymer/clay dispersion. Rheologica Acta, 50(1), 3-16. Lien externe
Abbasi, S., Carreau, P., & Derdouri, A. (2010). Flow induced orientation of multiwalled carbon nanotubes in polycarbonate nanocomposites: Rheology, conductivity and mechanical properties. Polymer, 51(4), 922-935. Lien externe
Ahmadi, S., Morshedian, J., Hashemi, S. A., Carreau, P., & Leelapornpisit, W. (2010). Novel anionic polymerization of -caprolactam towards polyamide 6 containing nanofibrils. Iranian Polymer Journal (English Edition), 19(3), 229-240. Lien externe
Sadeghi, F., Tabatabaei, S. H., Ajji, A., & Carreau, P. (2010). Properties of uniaxially stretched polypropylene films: Effect of drawing temperature and random copolymer content. Canadian Journal of Chemical Engineering, 88(6), 1091-1098. Lien externe
Keshtkar, M., Heuzey, M.-C., Carreau, P., Rajabian, M., & Dubois, C. (2010). Rheological properties and microstructural evolution of semi-flexible fiber suspensions under shear flow. Journal of Rheology, 54(2), 197-222. Lien externe
Tabatabaei, S. H., Carreau, P., & Ajji, A. (2010). Rheological Properties of Blends of Linear and Long-Chain Branched Polypropylenes. Polymer Engineering and Science, 50(1), 191-199. Lien externe
Keshtkar, M., Heuzey, M.-C., & Carreau, P. (2010). Rheology of LDPE-based semiflexible fiber suspensions. Polymer Composites, 31(8), 1474-1486. Lien externe
Mobuchon, C., Carreau, P., Heuzey, M.-C., Reddy, N. K., & Vermant, J. (2009). Anisotropy of nonaqueous layered silicate suspensions subjected to shear flow. Journal of Rheology, 53(3), 517-538. Lien externe
Tabatabaei, S. H., Carreau, P., & Ajji, A. (2009). Effect of processing on the crystalline orientation, morphology, and mechanical properties of polypropylene cast films and microporous membrane formation. Polymer, 50(17), 4228-4240. Lien externe
Sadeghi, F., Tabatabaei, S. H., Ajji, A., & Carreau, P. (2009). Effect of PVDF characteristics on extruded film morphology and porous membranes feasibility by stretching. Journal of Polymer Science. Part B: Polymer Physics, 47(12), 1219-1229. Lien externe
Férec, J., Heuzey, M.-C., Pérez-González, J., de Vargas, L., Ausias, G., & Carreau, P. (2009). Investigation of the rheological properties of short glass fiber-filled polypropylene in extensional flow. Rheologica Acta, 48(1), 59-72. Lien externe
Tabatabaei, S. H., Carreau, P., & Ajji, A. (2009). Microporous membranes obtained from PP/HDPE multilayer films by stretching. Journal of Membrane Science, 345(1-2), 148-159. Lien externe
Ferec, J., Ausias, G., Heuzey, M.-C., & Carreau, P. (2009). Modeling fiber interactions in semiconcentrated fiber suspensions. Journal of Rheology, 53(1), 49-72. Lien externe
Tabatabaei, S. H., Carreau, P., & Ajji, A. (2009). Rheological and thermal properties of blends of a long-chain branched polypropylene and different linear polypropylenes. Chemical Engineering Science, 64(22), 4719-4731. Lien externe
Keshtkar, M., Heuzey, M.-C., & Carreau, P. (2009). Rheological behavior of fiber-filled model suspensions: effect of fiber flexibility. Journal of Rheology, 53(3), 631-650. Lien externe
Abbasi, S., Carreau, P., Derdouri, A., & Moan, M. (2009). Rheological Properties and Percolation in Suspensions of Multiwalled Carbon Nanotubes in Polycarbonate. Rheologica Acta, 48(9), 943-959. Lien externe
Mobuchon, C., Carreau, P., & Heuzey, M.-C. (2009). Structural analysis of non-aqueous layered silicate suspensions subjected to shear flow. Journal of Rheology, 53(5), 1025-1048. Lien externe
Tabatabaei, S. H., Carreau, P., & Ajji, A. (2009). Structure and properties of MDO stretched polypropylene. Polymer, 50(16), 3981-3989. Lien externe
Rajabian, M., Dubois, C., Grmela, M., & Carreau, P. (2008). Effects of Polymer-Fiber Interactions on Rheology and Flow Behavior of Suspensions of Semi-Flexible Fibers in Polymeric Liquids. Rheologica Acta, 47(7), 701-717. Lien externe
Rajabian, M., Naderi, G., Beheshty, M. H., Lafleur, P., Dubois, C., & Carreau, P. (2008). Experimental Study and Modeling of Flow Behavior and Orientation Kinetics of Layered Silicate/Polypropylene Nanocomposites in Start-up of Shear Flows. International Polymer Processing, 23(1), 110-118. Lien externe
Tabatabaei, S. H., Carreau, P., & Ajji, A. (2008). Microporous membranes obtained from polypropylene blend films by stretching. Journal of Membrane Science, 325(2), 772-782. Lien externe
Sadeghi, F., Ajji, A., & Carreau, P. (2008). Microporous Membranes Obtained From Polypropylene Blends With Superior Permeability Properties. Journal of Polymer Science. Part B: Polymer Physics, 46(2), 148-157. Lien externe
Ferec, J., Heniche, M., Heuzey, M.-C., Ausias, G., & Carreau, P. (2008). Numerical Solution of the Fokker-Planck Equation for Fiber Suspensions: Application to the Folgar-Tucker-Lipscomb Model. Journal of Non-Newtonian Fluid Mechanics, 155(1-2), 20-29. Lien externe
Fang, Y., Sadeghi, F., Fleuret, G., & Carreau, P. (2008). Properties of Blends of Linear and Branched Polypropylenes in Film Blowing. Canadian Journal of Chemical Engineering, 86(1), 6-14. Lien externe
Sadeghi, F., & Carreau, P. (2008). Properties of uniaxially stretched polypropylene films. Canadian Journal of Chemical Engineering, 86(6), 1103-1110. Lien externe
Ferec, J., Heuzey, M.-C., Ausias, G., & Carreau, P. (2008). Rheological Behavior of Fiber-Filled Polymers Under Large Amplitude Oscillatory Shear Flow. Journal of Non-Newtonian Fluid Mechanics, 151(1-3), 89-100. Lien externe
Sadeghi, F., Ajji, A., & Carreau, P. (2007). Analysis of Microporous Membranes Obtained From Polypropylene Films by Stretching. Journal of Membrane Science, 292(1), 62-71. Lien externe
Sadeghi, F., Ajji, A., & Carreau, P. (2007). Analysis of Row Nucleated Larnellar Morphology of Polypropylene Obtained From the Cast Film Process : Effect of Melt Rheology and Process Conditions. Polymer Engineering and Science, 47(7), 1170-1178. Lien externe
Savarmand, S., Heniche, M., Béchard, V., Bertrand, F., & Carreau, P. (2007). Analysis of the Vane Rheometer Using 3D Finite Element Simulation. Journal of Rheology, 51(2), 161-177. Lien externe
Guo, M.-C., Heuzey, M.-C., & Carreau, P. (2007). Cell Structure and Dynamic Properties of Injection Molded Polypropylene Foams. Polymer Engineering and Science, 47(7), 1070-1081. Lien externe
Mobuchon, C., Carreau, P., & Heuzey, M.-C. (2007). Effect of Flow History on the Structure of a Non-Polar Polymer/Clay Nanocomposite Model System. Rheologica Acta, 46(8), 1045-1056. Lien externe
Huitric, J., Moan, M., Carreau, P., & Dufaure, N. (2007). Effect of Reactive Compatibilization on Droplet Coalescence in Shear Flow. Journal of Non-Newtonian Fluid Mechanics, 145(2-3), 139-149. Lien externe
Guo, M.-C., Santoni, A., Heuzey, M.-C., & Carreau, P. (2007). Occurrence of Surface Defects in Tpo Injected Foam Parts. Journal of Cellular Plastics, 43(4-5), 273-296. Lien externe
Letwimolnun, W., Vergnes, B., Ausias, G., & Carreau, P. (2007). Stress Overshoots of Organoclay Nanocomposites in Transient Shear Flow. Journal of Non-Newtonian Fluid Mechanics, 141(2-3), 167-179. Lien externe
Cho, J. Y., Heuzey, M.-C., Begin, A., & Carreau, P. (2006). Chitosan and Glycerophosphate Concentration Dependence of Solution Behaviour and Gel Point Using Small Amplitude Oscillatory Rheometry. Food Hydrocolloids, 20(6), 936-945. Lien externe
Sosa, A., Carreau, P., Tanguy, P. A., Ascanio, G., & Guerrero, C. (2006). The effect of thickener on the rheology of coating colors. Chemical Engineering Communications, 193(8), 917-928. Lien externe
Cho, J., Heuzey, M.-C., Begin, A., & Carreau, P. (2006). Effect of Urea on Solution Behavior and Heat-Induced Gelation of Chitosan-Beta-Glycerophosphate. Carbohydrate polymer, 63(4), 507-518. Lien externe
Ascanio, G., Carreau, P., & Tanguy, P. A. (2006). High-Speed Roll Coating With Complex Rheology Fluids. Experiments in Fluids, 40(1), 1-14. Lien externe
Hashemi, S. A., Ait-Kadi, A., & Carreau, P. (2006). The influence of surface treatment of fibers on the properties of glass fiber/ PA 6,6 composites. Journal of Polymer Engineering, 26(1), 1-19. Lien externe
Billotte, C., Carreau, P., & Heuzey, M.-C. (2006). Rheological characterization of a solder paste for surface mount applications. Rheologica Acta, 45(4), 374-386. Lien externe
Mary, B., Dubois, C., Carreau, P., & Brousseau, P. (2006). Rheological properties of suspensions of polyethylene-coated aluminum nanoparticles. Rheologica Acta, 45(5), 561-573. Lien externe
Cho, J. Y., Heuzey, M.-C., Begin, A., & Carreau, P. (2006). Viscoelastic Properties of Chitosan Solutions: Effect of Concentration and Ionic Strength. Journal of Food Engineering, 74(4), 500-515. Lien externe
Ascanio, G., Carreau, P., Reglat, O., & Tanguy, P. A. (2005). Extensional Rheology of Coating Suspensions in Relation With Misting in Film Coaters. Nordic Pulp & Paper Research Journal, 20(1), 48-53. Lien externe
Dufaure, N., Carreau, P., Heuzey, M.-C., & Michel, A. (2005). Phase Inversion in Immiscible Blends of Pe and Reactive Eva. Journal of Polymer Engineering, 25(3), 187-216. Lien externe
Cho, J., Heuzey, M.-C., Begin, A., & Carreau, P. (2005). Physical gelation of chitosan in the presence of β-glycerophosphate: The effect of temperature. Biomacromolecules, 6(6), 3267-3275. Lien externe
Fang, Y., Carreau, P., Lafleur, P., & Ymmel, S. (2005). Properties of MLLDPE/LDPE blends in film blowing. Polymer Engineering and Science, 45(3), 343-353. Lien externe
Ferretti, A., Carreau, P., & Gerard, P. (2005). Rheological and mechanical properties of PEO/block copolymer blends. Polymer Engineering and Science, 45(10), 1385-1394. Lien externe
Thomasset, J., Carreau, P., Sanschagrin, B., & Ausias, G. (2005). Rheological properties of long glass fiber filled polypropylene. Journal of Non-Newtonian Fluid Mechanics, 125(1), 25-34. Lien externe
Mobuchon, C., Carreau, P., Heuzey, M.-C., Sepehr, M., & Ausias, G. (2005). Shear and extensional properties of short glass fiber reinforced polypropylene. Polymer Composites, 26(3), 247-264. Lien externe
Sadeghi, F., Ajji, A., & Carreau, P. (2005). Study of polypropylene morphology obtained from blown and cast film processes: Initial morphology requirements for making porous membrane by stretching. Journal of Plastic Film & Sheeting, 21(3), 199-216. Lien externe
Fang, Y., Carreau, P., & Lafleur, P. (2005). Thermal and rheological properties of MLLDPE/LDPE blends. Polymer Engineering and Science, 45(9), 1254-1264. Lien externe
El-Sadi, H., Carreau, P., & Esmail, N. (2004). Changes in the Rheological and Colloidal Properties of Paper Coating Liquids With Paper-Yellowing Inhibition Additives. Journal of Colloid and Interface Science, 271(2), 496-503. Lien externe
Sepehr, M., Carreau, P., Grmela, M., Ausias, G., & Lafleur, P. (2004). Comparison of Rheological Properties of Fiber Suspensions With Model Predictions. Journal of Polymer Engineering, 24(6), 579-610. Lien externe
Sepehr, M., Ausias, G., & Carreau, P. (2004). Comportement rhéologique dans des écoulements transitoires en cisaillement simple des polymères fortement chargés en fibres courtes : mécanismes et déformations dans les matériaux multi-constituants. Mécanique & Industries, 5(4), 419-428. Lien externe
Kim, S., Fang, Y., Lafleur, P., & Carreau, P. (2004). Dynamics and criteria for bubble instabilities in a single layer film blowing extrusion. Polymer Engineering and Science, 44(2), 283-302. Lien externe
Arzate, A., Ascanio, G., Carreau, P., & Tanguy, P. A. (2004). Extensional viscosity of coating colors and its relation with jet coating performance. Applied Rheology, 14(5), 240-250. Disponible
Ascanio, G., Carreau, P., Brito-de la Fuente, E., & Tanguy, P. A. (2004). Forward deformable roll coating at high speed with Newtonian fluids. Chemical Engineering Research & Design, 82(3), 390-397. Lien externe
Chen, X., Heuzey, M.-C., & Carreau, P. (2004). Rheological properties of injection molded LDPE and mPE foams. Polymer Engineering and Science, 44(11), 2158-2164. Lien externe
Sepehr, M., Ausias, G., & Carreau, P. (2004). Rheological properties of short fiber filled polypropylene in transient shear flow. Journal of Non-Newtonian Fluid Mechanics, 123(1), 19-32. Lien externe
Sepehr, M., Carreau, P., Moan, M., & Ausias, G. (2004). Rheological Properties of Short Fiber Model Suspensions. Journal of Rheology, 48(5), 1023-1048. Lien externe
Banik, I., Carreau, P., & Schreiber, H. P. (2004). Temperature-Dependent Polymer-Polymer Interactions in Polystyrene-Polyethylene Blends. Journal of Polymer Science. Part B: Polymer Physics, 42(13), 2545-2557. Lien externe
Hashemi, S. A., Ait-Kadi, A., & Carreau, P. (2003). Effects of Surface Treatment of Kraft Wood Fibers by Polymerization Compounding on Properties of Fiber Composites. Journal of Polymer Engineering, 23(4), 281-298. Lien externe
Fang, Y. L., Carreau, P., & Lafleur, P. (2003). Rheological Effects of Polyethylenes in Film Blowing. Polymer Engineering and Science, 43(7), 1391-1406. Lien externe
Savarmand, S., Carreau, P., Bertrand, F., Vidal, D., & Moan, M. (2003). Rheological properties of concentrated aqueous silica suspensions: effects of pH and ions content. Journal of Rheology, 47(5), 1133-1149. Lien externe
Craciun, L., Carreau, P., Heuzey, M.-C., van de Ven, T., & Moan, M. (2003). Rheological properties of concentrated latex suspensions of poly(styrene-butadiene). Rheologica Acta, 42(5), 410-420. Lien externe
Lessard, D. G., Ousalem, M., Zhu, X. X., Eisenberg, A., & Carreau, P. (2003). Study of the Phase Transition of Poly(N,N-Diethylacrylamide) in Water by Rheology and Dynamic Light Scattering. Journal of Polymer Science. Part B: Polymer Physics, 41(14), 1627-1637. Lien externe
Kay, D., Carreau, P., Lafleur, P., Robert, L., & Vergnes, B. (2003). A Study of the Stick-Slip Phenomenon in Single-Screw Extrusion of Linear Polyethylene. Polymer Engineering and Science, 43(1), 78-90. Lien externe
Laffargue, J., Parent, L., Lafleur, P., Carreau, P., Demay, Y., & Agassant, J. F. (2002). Investigation of Bubble Instabilities in Film Blowing Process. International Polymer Processing, 17(4), 347-353. Lien externe
Marguerat, F., Carreau, P., & Michel, A. (2002). Morphology and Rheological Properties of Polypropylene/Reactive Elastomer Blends. Polymer Engineering and Science, 42(10), 1941-1955. Lien externe
Ascanio, G., Carreau, P., Brito, E., & Tanguy, P. A. (2002). Orifice flowmeter for measuring extensional rheological properties. Canadian Journal of Chemical Engineering, 80(6), 1189-1196. Lien externe
Page, A., Carreau, P., Moan, M., & Heuzey, M.-C. (2002). Rheological Behavior of Coating Colors: Influence of Thickener. Canadian Journal of Chemical Engineering, 80(6), 1181-1188. Lien externe
Ascanio, G., Brito-Bazan, M., Brito-De La Fuente, E., Carreau, P., & Tanguy, P. A. (2002). Unconventional Configuration Studies to Improve Mixing Times in Stirred Tanks. Canadian Journal of Chemical Engineering, 80(4), 558-565. Lien externe
Li, J., Tanguy, P. A., Carreau, P., & Moan, M. (2001). Effect of Thickener Structure on Paper-Coating Color Properties. Colloid and Polymer Science, 279(9), 865-871. Lien externe
Citerne, G. P., Carreau, P., & Moan, M. (2001). Rheological Properties of Peanut Butter. Rheologica Acta, 40(1), 86-96. Lien externe
Della Valle, D., Tanguy, P. A., & Carreau, P. (2000). Characterization of the Extensional Properties of Complex Fluids Using an Orifice Flowmeter. Journal of Non-Newtonian Fluid Mechanics, 94(1), 1-13. Lien externe
Martin, P., Carreau, P., Favis, B. D., & Jérôme, R. (2000). Investigating the morphology/rheology inter-relationships in immiscible polymer blends. Journal of Rheology, 44(3), 568-583. Lien externe
Chapleau, N., Favis, B. D., & Carreau, P. (2000). Measuring the Interfacial Tension of Polyamide/Polyethylene and Polycarbonate/Polypropylene Blends: Effect of Temperature. Polymer, 41(17), 6695-6698. Lien externe
Tovar, G., Carreau, P., & Schreiber, H. P. (2000). Transesterification, Morphology and Some Mechanical Properties of Thermotropic Liquid Crystal Polymers/Polycarbonate Blends. Colloids and Surfaces. A, Physicochemical and Engineering Aspects, 161(1), 213-223. Lien externe
Mekhilef, N., Carreau, P., Favis, B. D., Martin, P., & Ouhlal, A. (2000). Viscoelastic Properties and Interfacial Tension of Polystyrene- Polyethylene Blends. Journal of Polymer Science. Part B: Polymer Physics, 38(10), 1359-1368. Lien externe
Carreau, P., Bousmina, M., & Bonniot, F. (2000). The Viscoelastic Properties of Polymer-Modified Asphalts. Canadian Journal of Chemical Engineering, 78(3), 495-503. Lien externe
Lacroix, C., Grmela, M., & Carreau, P. (1999). Morphological Evolution of Immiscible Polymer Blends in Simple Shear and Elongational Flows. Journal of Non-Newtonian Fluid Mechanics, 86(1-2), 37-59. Lien externe
Yziquel, F., Carreau, P., & Tanguy, P. A. (1999). Non-Linear Viscoelastic Behavior of Fumed Silica Suspensions. Rheologica Acta, 38(1), 14-25. Lien externe
Yziquel, F., Moan, M., Carreau, P., & Tanguy, P. A. (1999). Nonlinear Viscoelastic Behavior of Paper Coating Colors. Nordic Pulp & Paper Research Journal, 14(1), 37-47. Lien externe
Bertrand, F., Tanguy, P. A., De La Fuente, E. B., & Carreau, P. (1999). Numerical Modeling of the Mixing Flow of Second-Order Fluids With Helical Ribbon Impellers. Computer Methods in Applied Mechanics and Engineering, 180(3-4), 267-280. Lien externe
Yziquel, F., Carreau, P., Moan, M., & Tanguy, P. A. (1999). Rheological Modeling of Concentrated Colloidal Suspensions. Journal of Non-Newtonian Fluid Mechanics, 86(1-2), 133-155. Lien externe
Mighri, F., Carreau, P., & Ajji, A. (1998). Influence of Elastic Properties on Drop Deformation and Breakup in Shear Flow. Journal of Rheology, 42(6), 1477-1490. Lien externe
Chapleau, N., Favis, B. D., & Carreau, P. (1998). Measuring the Interfacial Tension of Polymers in the Presence of an Interfacial Modifier: Migrating the Modifier to the Interface. Journal of polymer science. Part B, Polymer physics, 36(11), 1947-1958. Lien externe
Della Valle, G., Buleon, A., Carreau, P., Lavoie, P. A., & Vergnes, B. (1998). Relationship Between Structure and Viscoelastic Behavior of Plasticized Starch. Journal of Rheology, 42(3), 507-525. Lien externe
Lacroix, C., Grmela, M., & Carreau, P. (1998). Relationships Between Rheology and Morphology for Immiscible Molten Blends of Polypropylene and Ethylene Copolymers Under Shear Flow. Journal of Rheology, 42(1), 41-62. Lien externe
Mighri, F., Ajji, A., & Carreau, P. (1997). Influence of elastic properties on drop deformation in elongational flow. Journal of Rheology, 41(5), 1183-1201. Lien externe
Lacroix, C., Aressy, M., & Carreau, P. (1997). Linear viscoelastic behavior of molten polymer blends: a comparative study of the palierne and lee and park models. Rheologica Acta, 36(4), 416-428. Lien externe
Thomasset, J., Grmela, M., & Carreau, P. (1997). Microstructure and rheology of polymer melts reinforced by long glass fibres: Direct simulations. Journal of Non-Newtonian Fluid Mechanics, 73(3), 195-203. Lien externe
Mekhilef, N., Favis, B. D., & Carreau, P. (1997). Morphological stability, interfacial tension, and dual-phase continuity in polystyrene-polyethylene blends. Journal of polymer science. Part B, Polymer physics, 35(2), 293-308. Lien externe
Legros, A., Carreau, P., Favis, B. D., & Michel, A. (1997). Morphology modification by interfacial chemical reaction in a polyester/ethylene vinyl acetate/polyethylene blend. Polymer, 38(20), 5085-5089. Lien externe
Ghanehfard, A., Carreau, P., & Lafleur, P. (1997). On-line birefringence measurement in film blowing of a linear low density polyethylene. International Polymer Processing, 12(2), 136-146. Lien externe
Lavoie, P. A., Carreau, P., & Ghosh, T. (1997). Rheology of suspensions: the flow behaviour of coating colours. Journal of Pulp and Paper Science, 23(11), J543-J547. Non disponible
Ghaneh-Fard, A., Carreau, P., & Lafleur, P. (1997). Study of kinematics and dynamics of film blowing of different polyethylenes. Polymer Engineering and Science, 37(7), 1148-1163. Lien externe
Tovar, G., Carreau, P., & Schreiber, H. P. (1997). Surface and interaction characteristics of liquid crystal polymers and their miscibility with thermoplastic hosts. Journal of Adhesion, 63(1-3), 215-230. Lien externe
Huneault, M. A., Lafleur, P., & Carreau, P. (1996). Evaluation of the fan technique for profile die design. International Polymer Processing, 11(1), 50-57. Lien externe
Mighri, F., Ajji, A., & Carreau, P. (1996). Influence of rheological properties on drop deformation in elongational flow. Journal of Engineering and Applied Science, 2, 2601-2605. Non disponible
Lacroix, C., Bousmina, M., Carreau, P., Favis, B. D., & Michel, A. (1996). Properties of PETG/EVA blends: 1. Viscoelastic, morphological and interfacial properties. Polymer, 37(14), 2939-2947. Lien externe
Lacroix, C., Bousmina, M., Carreau, P., Llauro, M. F., Petiaud, R., & Michel, A. (1996). Properties of PETG/EVA blends: 2. Study of reactive compatibilization by n.m.r. spectroscopy and linear viscoelastic properties. Polymer, 37(14), 2949-2956. Lien externe
Carreau, P., Lavoie, P.-A., & Bagassi, M. (1996). Rheological properties of filled polymers. Macromolecular Symposia, 108(1), 111-126. Lien externe
Ghaneh-Fard, A., Carreau, P., & Lafleur, P. (1996). Study of instabilities in film blowing. AICHE Journal, 42(5), 1388-1396. Lien externe
Dlugogorski, B. Z., Grmela, M., & Carreau, P. (1995). Direct modeling of flow of FENE fluids. Rheologica Acta, 34(4), 384-396. Lien externe
Chapleau, N., Favis, B. D., & Carreau, P. (1995). Evaluation of the interfacial tension using the breaking thread method: Effect of temperature and of interfacial modifier. Polymeric Materials Science and Engineering, 73, 18-19. Non disponible
Chapleau, N., Favis, B. D., & Carreau, P. (1995). Evaluation of the interfacial-tension using the breaking thread method - effect of temperature and ot interfacial modifier. Abstracts of Papers of the American Chemical Society, 210, 10-10. Non disponible
Ghosh, T., Grmela, M., & Carreau, P. (1995). Rheology of short fiber filled thermoplastics. Polymer Composites, 16(2), 144-153. Lien externe
Tiu, C., Moussa, T., & Carreau, P. (1995). Steady and dynamic shear properties of non-aqueous drag-reducing polymer solutions. Rheologica Acta, 34(6), 586-600. Lien externe
Cheng, J., & Carreau, P. (1994). Aerated mixing of viscoelastic fluids with helical ribbon impellers. Chemical Engineering Science, 49(12), 1965-1972. Lien externe
Wang, X., Clément, B., Carreau, P., & Lafleur, P. (1994). Extrudate roughness of HDPE and LLDPE : Determination of key parameters using screening design. Polymer Engineering and Science, 34(13), 1047-1055. Lien externe
Carreau, P., Paris, J., & Guérin, P. (1994). Heat transfer to newtonian and non-newtonian liquids in a screw agitator and draft coil system. Canadian Journal of Chemical Engineering, 72(6), 966-974. Lien externe
Cheng, J., & Carreau, P. (1994). Mixing in the transition flow regime with helical ribbon agitators. Canadian Journal of Chemical Engineering, 72(3), 418-430. Lien externe
Bouchard, C. R., Carreau, P., Matsuura, T., & Sourirajan, S. (1994). Modeling of ultrafiltration : predictions of concentration polarization effects. Journal of Membrane Science, 97, 215-229. Lien externe
Legros, A., Carreau, P., Favis, B. D., & Michel, A. (1994). Reactive compatibilization of polyester/vinyl acetate copolymer blends: rheological, morphological and mechanical properties. Polymer, 35(4), 758-764. Lien externe
Ortiz, M., De Kee, D., & Carreau, P. (1994). Rheology of concentrated poly(ethylene oxide) solutions. Journal of Rheology, 38(3), 519-539. Lien externe
Dlugogorski, B. Z., Grmela, M., Carreau, P., & Lebon, G. (1994). Rheology of several hundred rigid bodies. Journal of Non-Newtonian Fluid Mechanics, 53, 25-64. Lien externe
Carreau, P., & Dekee, D. (1994). Special issue - selected papers presented at the 3rd conference on, recent developments in structural continua, montreal, quebec, canada, may 26-28, 1993 - preface. Journal of Non-Newtonian Fluid Mechanics, 53. Non disponible
Malik, T. M., Carreau, P., Grmela, M., & Dufresne, A. (1988). Mechanical and rheological properties of carbon black filled polyethylene. Polymer Composites, 9(6), 412-418. Lien externe
Grmela, M., & Carreau, P. (1983). Mesoscopic kinetic theory of polymer melts. The Journal of Chemical Physics, 78(8), 5164-5174. Lien externe
Carreau, P., Charest, G., & Corneille, J. L. (1966). Heat transfer to agitated non-newtonian fluids. Canadian Journal of Chemical Engineering, 44(1), 3-8. Lien externe
Lacroix, C., Grmela, M., & Carreau, P. (1998). Response to "Comment on 'relationships Between Rheology and Morphology for Immiscible Molten Blends of Polypropylene and Ethylene Copolymers Under Shear Flow'" [J Rheol 42,1273- 1276(1998)] [Commentaire ou lettre]. Journal of Rheology, 42(5), 1277-1279. Lien externe
Savarmand, S., Carreau, P., Bertrand, F., Vidal, J. E., & Moan, M. (2003). Rheological properties of concentrated aqueous silica suspensions : effects of pH and ions content. (Rapport technique n° Report 837). Non disponible
Nofar, M., Tabatabaei, A., Park, C. B., Carreau, P., Heuzey, M.-C., & Kamal, M. R. (mai 2017). Wide-range of microcellular bead foams from different PLA-based drop/sea blend morphologies [Communication écrite]. 75th Annual Technical Conference and Exhibition of the Society of Plastics Engineers (SPE ANTEC 2017), Anaheim, CA. Lien externe
Bagheriasl, D., Carreau, P., Dubois, C., & Riedl, B. (juin 2014). Effect of cellulose nanocrystals (CNCs) on crystallinity, mechanical and rheological properties of polypropylene/CNCs nanocomposites [Communication écrite]. 30th International Conference of the Polymer Processing Society (PPS-30), Cleveland, Ohio, USA (5 pages). Lien externe
Kolahchi, A. R., Ajji, A., & Carreau, P. (juin 2014). Improvement of PET surface hydrophilicity and roughness through blending [Communication écrite]. 30th International Conference of the Polymer Processing Society (PPS-30), Cleveland, Ohio, USA (4 pages). Lien externe
Saffar, A., Ajji, A., Carreau, P., & Katnal, M. R. (avril 2014). Development of polypropylene microporous hydrophilic membranes by blending with acrylic acid grafted polypropylene [Communication écrite]. 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2014), Las Vegas, NV, United states. Lien externe
Rezaei Kolahchi, A., Ajji, A., & Carreau, P. (avril 2012). Effect of stabilizers, molecular weight and environment on thermal stability of Polyethylene Glycol (PEG) [Communication écrite]. 70th Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2012), Orlando, FL, United states. Lien externe
Jalali Dil, E., Carreau, P., Ravati, S., & Favis, B. D. (avril 2012). Morphology of poly(lactic acid)/poly(butylene adipate-co-terephthalate) blends and its composite with spherical silica particles [Communication écrite]. 70th Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2012), Orlando, FL, United states. Lien externe
Dini, M., Carreau, P., Mousavand, T., Kamal, M. R., & Ton-That, M.-T. (avril 2012). A novel method to prepare pet nanocomposites by water-assisted melt compounding [Communication écrite]. 70th Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2012), Orlando, FL, United states. Lien externe
Meng, Q., Heuzey, M.-C., Carreau, P., & De Kee, D. (mai 2011). Thermo-mechanical properties and thermal degradation control of poly (lactic acid) and poly (lactic acid)/clay/wood nanocomposites [Communication écrite]. 69th Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2011), Boston, MA, United states. Non disponible
Sadeghi, F., Tabatabei, H., Carreau, P., & Ajji, A. (février 2010). Structure and properties of PP films: Effect of cast film process conditions, MDO stretching and blending with a random PP [Communication écrite]. International Polyolefins Conference, Houston, TX, United states. Non disponible
Hesam, G., Carreau, P., Kamal, M. R., & Tabatabaei, S. H. (mai 2010). Study on morphology, crystallinity, barrier and mechanical properties of PET nanocomposite films [Communication écrite]. 68th Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2010), Orlando, Florida USA. Lien externe
Maani, A., Heuzey, M.-C., Carreau, P., & Khennache, O. (juin 2009). Cell structure of injection molded thermoplastic olefin foams [Communication écrite]. 67th Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2009), Chicago, IL, United states. Lien externe
Abbasi, S., Derdouri, A., & Carreau, P. (juin 2009). Effect of crystalline structure on morphology and properties of MWCNT nanocomposites [Communication écrite]. 67th Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2009), Chicago, IL, United states. Lien externe
Parent, L., Cigana, P., Ajji, A., & Carreau, P. (juin 2009). Effect of machine direction orientation conditions on structure and properties of hdpe films [Communication écrite]. 67th Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2009), Chicago, IL, United states. Lien externe
Abbasi, S., Derdouri, A., & Carreau, P. (août 2009). Effect of nanotube alignment on the morphology and properties of Polycarbonate/MWCNT nanocomposites [Communication écrite]. 8th World Congress of Chemical Engineering, Montréal, Québec. Non disponible
Shahbikian, S., Carreau, P., Heuzey, M.-C., Ellul, M. D., Nadella, H. P., Cheng, J., & Shirodkar, P. (octobre 2009). Morphology and rheology of non-reactive and reactive EPDM/PP blends in transient shear flow: plasticized vs. Non-plasticized blends [Communication écrite]. 176th Technical meeting of the ACS Rubber Division, Fall 2009, Pittsburgh, PA., USA. Lien externe
Ghasemi, H., Carreau, P., & Kamal, M. R. (juin 2009). PET/clay nanocomposites by melt compounding [Communication écrite]. 67th Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2009), Chicago, IL, United states. Lien externe
Cigana, P., Parent, L., Tabatabei, H., Sadeghi, F., Carreau, P., & Ajji, A. (février 2009). Process, structure and properties of cast and MDO stretched films of HDPE, PP and blends of random and linear PPS [Communication écrite]. International Polyolefins Conference, Houston, Tx, USA. Non disponible
Carreau, P., Abbasi, S., & Derdouri, A. (octobre 2009). Rheological properties and percolation behavior of polypropylene/multiwalled carbon nanotube composites [Communication écrite]. 81st Annual Meeting of the Society of Rheology, Madison, WI, USA. Lien externe
Tabatabaei, S. H., Carreau, P., & Ajji, A. (juin 2008). Microporous membranes obtained from polypropylene blend films by stretching [Communication écrite]. Polymer Processing International Meeting, Salerno, Italy. Non disponible
Savarmand, S., Carreau, P., Bertrand, F., & Vidal, D. (juin 2008). Models for the rheology of clay-GCC coating colors [Communication écrite]. TAPPI Advanced Coating Fundamentals Symposium, Montréal, Québec. Lien externe
Abbasi, S., Derdouri, A., & Carreau, P. (juin 2008). Morphological electrical and mechanical properties of PC/MWCNT composites in different microinjection molding conditions [Communication écrite]. 24th Annual Meeting of the Polymer Processing society, Salerno, Italy. Non disponible
Abbasi, S., Leelapornpisit, W., Derdouri, A., & Carreau, P. (mai 2008). Morphology and properties of microinjected polycarbonate/MWCNT nanocomposites [Communication écrite]. 66th Annual Technical Conference of the Society of Plastics Engineers, Plastics Encounter at ANTEC 2008. Non disponible
Ausias, G., Férec, J., Heuzey, M.-C., Carreau, P., Fan, X., & Tanner, R. I. (janvier 2008). Rhéologie des suspensions non-diluées de fibres avec interactions entre particules [Communication écrite]. Colloque MECAMAT, Aussois, France. Lien externe
Tabatabaei, S. H., Carreau, P., & Ajji, A. (mai 2008). Rheology and properties of blends of two linear and a long-chain branched polypropylenes [Communication écrite]. 66th Annual Technical Conference of the Society of Plastics Engineers, Plastics Encounter at ANTEC 2008. Non disponible
Keshtkar, M., Heuzey, M.-C., & Carreau, P. (août 2008). Rheology of semi-flexible fiber suspensions [Communication écrite]. 15th International Congress on Rheology, Monterey, California. Lien externe
Abbasi, S., Derdouri, A., & Carreau, P. (août 2008). Rheology, morphology and temperature dependency of nanotube networks in polycarbonate/multiwalled carbon nanotube composites [Communication écrite]. 15th International Congress on Rheology, Monterey, CA. Lien externe
Shahibikian, S., Carreau, P., Heuzey, M.-C., Ellul, M. D., Shirodkar, P. P., & Cheng, J. (août 2008). Rheology/morphology relationship of immiscible EPDM/PP based thermoplastic elastomer blends [Communication écrite]. 15th International Congress on Rheology, Monterey, California. Lien externe
Savarmand, S., Carreau, P., Bertrand, F., & Vidal, D. (octobre 2007). Rheology of Clay-GCC Coating Colors [Communication écrite]. 79th Annual Meeting of the Society of Rheology, Salt Lake City, Utah. Lien externe
Mobuchon, C., Heuzey, M.-C., & Carreau, P. (juillet 2006). Effect of Flow History on Structure Build-Up and Breakdown of Polymer/Clay Nanocomposite Model System [Communication écrite]. 3rd Brazilian Conference on Rheology, Rio de Janeiro, Brazil. Non disponible
Savarmand, S., Carreau, P., Bertrand, F., & Vidal, D. (octobre 2006). Effect of strongly repulsive particle interactions on the rheology of concentrated silica suspensions [Communication écrite]. 78th Annual Meeting of the Society of Rheology, Portland, ME, USA. Lien externe
Mobuchon, C., Carreau, P., & Heuzey, M.-C. (avril 2023). Model Systems for the Rheological Investigation of Polymer/Clay Nanocomposite [Communication écrite]. 3rd Annual European Rheology Conference, Crete, Grèce. Non disponible
Guo, M. C., Heuzey, M.-C., & Carreau, P. (septembre 2006). Occurrence of Surface Defects in TPO Injection Foamed Automotive Parts [Communication écrite]. 5th International Conference on Foam Processing & Technology (FOAMS TopCon 2006), Chicago, Ill.. Non disponible
Guillaud, S., Heuzey, M.-C., Carreau, P., & Polverari, M. (avril 2023). Rheology of Hydrophobically Modified Polyelectrolytes [Communication écrite]. 3rd Annual European Rheology Conference, Crete, Grèce. Non disponible
Lertwimolnun, W., Vergnes, B., Ausias, G., & Carreau, P. (octobre 2005). Caractéristique rhéologique de nanocomposites polypropylène/argile en régime transitoire [Communication écrite]. 40e Colloque annuel du Groupe français de rhéologie, Nice, France (5 pages). Lien externe
Cho, J., Heuzey, M.-C., Bégin, A., & Carreau, P. (mai 2023). Rheology of heat-induced gelation of chitosan solutions [Communication écrite]. Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2005), Boston. Lien externe
Sadeghi, F., Ajji, A., & Carreau, P. (mai 2023). Study of polypropylene morphology to obtain porous membranes by stretching [Communication écrite]. Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2005), Boston. Lien externe
Chen, X., Heuzey, M.-C., & Carreau, P. (janvier 2004). Rheological study of injection molded polyolefin foams [Communication écrite]. Society of plastics engineers ANTEC, Chicago, Il.. Lien externe
Arzate, A., Ascanio, G., Carreau, P., & Tanguy, P. A. (octobre 2003). Extensional rheology of paper coating colors at high strain rate [Communication écrite]. 75th annual meeting of the Society of Rheology, Pittsburgh, Pennsylvania, USA. Non disponible
Carreau, P., Cotton, F., & Citerne, G. P. Rheological Properties of Concentrated Suspensions: Applications to Foodstuffs [Communication écrite]. Engineering and Food for the 21st Century. Lien externe
Savarmand, S., Carreau, P., Bertrand, F., & Vidal, D. (octobre 2001). Propriétés rhéologiques de suspensions de particules de silice [Communication écrite]. 36e Colloque annuel du Groupe français de rhéologie, Marne-la-vallée, France. Non disponible
Savarmand, S., Carreau, P., Bertrand, F., & Vidal, D. (octobre 2001). Rheological properties of silica suspensions [Communication écrite]. 73rd Annual Meeting of the Society of Rheology, Bethesda, Maryland, USA. Non disponible
Sepehr, M., Carreau, P., & Ausias, G. (janvier 2001). Viscosity overshoot for short fiber filled polymer in shear flow [Communication écrite]. 17th Annual Meeting of the Polymer Processing Society, Montréal, Québec. Non disponible
Ausias, G., Jego, M., Sepehr, M., Carreau, P., Fraissard, B., & Moan, M. (janvier 2000). Morphology and rheological properties of polyolefine/elastomers blends [Communication écrite]. 13th Congress on Rheology, Cambridge, UK. Non disponible
Marguerat, F., Carreau, P., Gori, S., & Michel, A. (janvier 2000). Morphology and rheological properties of reactive polyolefine/elastomer blends [Communication écrite]. 13th Congress on Rheology, Cambridge UK. Non disponible
Carreau, P. (janvier 2000). Rheological properties of immiscible polymer blends [Communication écrite]. Sixteen annual meeting of the polymer processing society, Shanghai, China. Non disponible
Tanguy, P. A., Bertrand, F., Brito de la Fuente, E., & Carreau, P. (novembre 1998). The effect of elasticity on the mixing of boger fluids with helical ribbons [Communication écrite]. 1998 AIChE Annual Meeting, Miami, CA, USA. Non disponible
Lafleur, P., Carreau, P., & Ghaneh-Fard, A. (septembre 1998). In-line birefringence measurements on film blowing of polyolefins [Communication écrite]. International Symposium on Orientation of Polymers, Boucherville, Qc.. Non disponible
Carreau, P., Lacroix, C., & Grmela, M. (octobre 1998). Prédiction de l'évolution de la morphologie de mélanges de polymères immiscibles en cisaillement simple et écoulement élongationnel [Communication écrite]. 33e Colloque annuel du Groupe français de rhéologie & 8. Reunion anual del Grupo especializado de reologia de las Reales sociedades de fisica y quimica, Biarritz, France. Publié dans Cahiers de rhéologie, 16(1). Non disponible
Carreau, P., Ghaneh-Ford, A., & Lafleur, P. (avril 1998). Rheological effects in film blowing [Communication écrite]. Annual Technical Conference of the Society of Plastics Engineers (ANTEC 1998). Lien externe
Chapleau, N., Favis, B. D., & Carreau, P. (avril 1997). Morphology of polyamide/polyethylene blends under extensional flow: Effect of compatibilization [Communication écrite]. 55th Annual Technical Conference (ANTEC 1997), Toronto, Can. Lien externe
Della Valle, D., Tanguy, P. A., Carreau, P., & Lavoie, P. A. (octobre 1997). A new rheometer for the extensional properties of viscoelastic liquids [Communication écrite]. 32e Colloque Annuel du Groupe Français de Rhéologie, Nantes, France. Publié dans Cahiers de rhéologie, 15(4). Non disponible
Della Valle, G., Buleon, A., Carreau, P., Lavoie, P., & Vergnes, B. (octobre 1997). Relations entre structure et comportement viscoélastique d'amidons plastifiés [Communication écrite]. 32e Colloque Annuel du Groupe Français de Rhéologie, Nantes, France. Publié dans Cahiers de rhéologie, 15(4). Non disponible
Lacroix, C., Martin, P., Grmela, M., & Carreau, P. (octobre 1997). Rheology and morphology of immiscible polymer blends in simple shear flow [Communication écrite]. International Symposium on Polymer Blends, Alloys and Filled Systems (POLYBLENDS 1997), Boucherville, Can. Non disponible
Ghosh, T., Lavoie, P. A., & Carreau, P. Rheology of coating colors and their runnability on a cylindrical laboratory coater [Communication écrite]. TAPPI 1996 Coating Conference USA. Publié dans Tappi journal, 80(11). Lien externe
Della Valle, D., Tanguy, P. A., Carreau, P., Lavoie, P. A., Parent, L., & Bertrand, F. (janvier 1997). A specific rheometer for extensional properties of coating colours [Communication écrite]. 1997 CPPA Annual Meeting, Montréal, Qc, Canada. Non disponible
Tanguy, P. A., Bertrand, F., & Carreau, P. (octobre 1997). Three-dimensional modelling of boger fluid flows in helical ribbon mixers [Communication écrite]. 69th Annual Meeting of the Society of Rheology, Columbus, Ohio. USA. Lien externe
Mighri, F., Carreau, P., & Ajji, A. (octobre 1997). Visualization of the deformation and breakup of elastic drops in elastic matrices in shear flow [Communication écrite]. International Symposium on Polymer Blends, Alloys and Filled Systems (POLYBLENDS 1997), Boucherville, Can. Non disponible
Ghaneh-Fard, A., Carreau, P., & Lafleur, P. (mai 1995). Application of birefringence to film blowing [Communication écrite]. 53rd Annual Technical Conference, Boston, MA. Publié dans Journal of Plastic Film & Sheeting, 12(1). Non disponible
Lavoie, P.-A., Ghosh, T., & Carreau, P. (juin 1996). Rheology of coating colors: A comprehensive approach [Communication écrite]. International Paper and Coating Chemistry Symposium, Ottawa, Can. Non disponible
Carreau, P., & Lavoie, P.-A. (février 1996). Rheology of suspensions: the use of model fluids to simulate the flow behaviour of coating colours [Communication écrite]. 82nd Annual Meeting of Technical Section Canadian Pulp and Paper Association, Montréal, Québec. Non disponible
Ghaneh-Fard, A., Carreau, P., & Lafleur, P. (mai 1996). Study of kinematics and dynamics of film blowing of a linear low density polyethylene [Communication écrite]. 54th Annual Technical Conference, Indianapolis, IN, USA. Non disponible
Mekhilef, N., Carreau, P., & Favis, B. D. (janvier 1996). Viscoelastic properties of polystyrene-polyethylene blends: interfacial tension measurements using the breaking thread method and predictions with an emulsion model [Communication écrite]. 12th Annual Meeting of the Polymer Processing Society, Sorrento, Italy. Non disponible
Mighri, F., Ajji, A., & Carreau, P. Influence of rheological properties on drop deformation in elongational flow [Communication écrite]. SPE Regional Technical Conference on Polymer Alloys and Blends (Polyblends 1995). Non disponible
Mekhilef, N., Favis, B. D., & Carreau, P. (mai 1995). Morphological stability of polystyrene polyethylene blends [Communication écrite]. 53rd Annual Technical Conference, Boston, MA, USA. Non disponible
Carreau, P., Bonniot, F., & Bousmina, M. (octobre 1995). Polymer modified asphalts [Communication écrite]. SPE Regional Technical Conference on Polymer Alloys and Blends (Polyblends 1995), Boucherville, Can. Non disponible
Wang, X., Carreau, P., & Lafleur, P. (mai 1994). Entrance pressure loss and extrudate roughness during hdpe extrusion [Communication écrite]. Annual Technical Conference of the Society of Plastics Engineers (ANTEC 1994), San Francisco, Ca.. Non disponible
Doyon, J.-F., Lafleur, P., Carreau, P., & Vergnes, B. (mai 1994). Recycling of polyolefins: processability and degradation [Communication écrite]. 52nd Annual Technical Conference ANTEC 94, San Francisco, CA, USA. Non disponible
Carreau, P., Bousmina, M., & Ajji, A. (décembre 1993). Rheological properties of blends: Facts and challenges [Communication écrite]. 3rd Pacific Polymer Conference, Gold Coast, Queensland, Australie. Lien externe
Brito-de-la-Fuente, E., Carreau, P., Cheng, J., Bertrand, F., Tanguy, P. A., & Choplin, L. (juin 1993). Macromixing of rheologically complex fluids with helical impellers [Communication écrite]. 14th biennial Conference on Mixing (Mixing XVIII), Santa Barbara, CA, USA. Non disponible
Nakhle, W., Bruel, C., Girard, M., Carreau, P., Tavares, J. R., & Heuzey, M.-C. (février 2019). Intrinsic viscosity & rheological properties of crystalline nanocellulose as functions of dispersion [Affiche]. PaperWeek Nanocellulose Challenge Symposium, Montréal, Québec, Canada. Non disponible
Bruel, C., Davies, T. S., Tavares, J. R., Carreau, P., & Heuzey, M.-C. (juin 2019). Promotion of CNC self-ordering in non-aqueous solvents [Affiche]. CREPEC Student Colloquium, Montréal, Québec, Canada. Non disponible
Bruel, C., Davies, T. S., Tavares, J. R., Carreau, P., & Heuzey, M.-C. (mai 2019). Promotion of CNC self-ordering in non-aqueous solvents [Affiche]. 6e atelier du GDRI Nanomatériaux multifonctionnels composites, Jouvence, Québec, Canada. Non disponible
Taguet, A., Mohammadi, M., Heuzey, M.-C., & Carreau, P. (octobre 2021). Polymer Blend Nanocomposites Based on Cellulose Nanocrystals (CNC) [Présentation]. Dans 7th International Polysaccharide Conference (EPNOE 2021), Nantes, France. Lien externe
Heuzey, M.-C., Tavares, J. R., Carreau, P., Bruel, C., Girard, M., & Nakhle, W. (février 2019). Dispersion of CNCs in polar and non-polar media: dictated by surface properties, improved by sonication and quantified by rheology [Présentation]. Dans PaperWeek Nanocellulose Challenge Symposium, Montréal, Québec, Canada. Non disponible
Bruel, C., Tavares, J. R., Carreau, P., & Heuzey, M.-C. (juin 2019). Impact of colloidal stability on cellulose nanocrystals self-ordering in thin films [Présentation]. Dans TechConnect World Innovation Conference and Expo, Boston, MA, USA. Lien externe
Bruel, C., Tavares, J. R., Carreau, P., & Heuzey, M.-C. (octobre 2019). Non-aqueous dispersion and self-ordering of cellulose nanocrystals [Présentation]. Dans 69th Canadian Chemical Engineering Conference (CSChE Conferences 2019), Halifax, NS, CA. Non disponible
Bruel, C., Tavares, J. R., Carreau, P., & Heuzey, M.-C. (février 2019). Promotion of CNC self-assembly in non-aqueous solvents [Présentation]. Dans PaperWeek Nanocellulose Challenge Symposium, Montréal, Québec, Canada. Non disponible
Bruel, C., Tavares, J. R., Carreau, P., & Heuzey, M.-C. (mars 2019). Promotion of CNC self-ordering in non-aqueous solvents [Présentation]. Dans Chemical Engineering Research Day, Montréal, Québec , Canada. Non disponible
Nakhle, W., Tavares, J. R., Carreau, P., & Heuzey, M.-C. (mars 2019). Rheoproperties of CNC suspensions [Présentation]. Dans Chemical Engineering Research Day, Montréal, Québec, Canada. Non disponible
Shahverdi-Shahraki, K., Ajji, A., Carreau, P., Ghosh, T., & Mahajan, K. (2017). PET nanocomposite materials and containers prepared therefrom. (Brevet no US9676926). Lien externe
Tabatabaei, S. H., Carreau, P., & Ajji, A. (2010). Cast films, microporous membranes, and method of preparation thereof. (Demande de brevet no WO2010148492). Lien externe
Ghanbari, A., Heuzey, M.-C., Carreau, P., & Ton-That, M.-T. (2016). Morphology and gas barrier properties of polymer nanocomposites. Dans Polymer Morphology : Principles, Characterization, and Processing (p. 397-417). Lien externe
Utracki, L. A., Sepehr, M. M., & Carreau, P. (2010). Rheology of Polymers with Nanofillers. Dans Polymer Physics : From Suspensions to Nanocomposites and Beyond (p. 639-708). Lien externe
Brito-De La Fuente, E., Bertrand, F., Carreau, P., & Tanguy, P. A. (2002). Mixing of viscoelastic fluids: A new strategy to elucidate the influence of elasticity on power consumption. Dans Engineering and Food for the 21st Century (p. 347-359). Lien externe
Carreau, P., & Grmela, M. (1991). Conformation tensor rheological models. Dans Rheological modelling : thermodynamical and statistical approaches (Vol. 381, p. 126-157). Lien externe
