 | Monter d'un niveau |
Randall, J., Flodquist, M., Schroeder, J., Valentine, J. R., Owusu, O., McCarthy, K., Weed, J., Hennen, J., Heuzey, M.-C., & Carreau, P. (2023). Comparing the Structural, Thermal, and Rheological Properties of Poly(meso-lactide) to Poly(l-lactide) and Poly(rac-lactide). Macromolecules, 14 pages. Lien externe
Mousavi, Z., Heuzey, M.-C., & Carreau, P. (2023). Compatibilized polylactide/polyamide 11 blends containing multiwall carbon nanotubes: Morphology, rheology, electrical and mechanical properties. Polymer, 276, 13 pages. Lien externe
Mohammadi, M., Li, Y., Randall, J., Nofar, M., Heuzey, M.-C., & Carreau, P. (2023). Effects of molecular weight, stereo configuration of PLA, and processing on the dispersion of multiwalled carbon nanotubes and properties of corresponding nanocomposites. Canadian Journal of Chemical Engineering, 101(10), 5729-5742. Lien externe
Mousavi, Z., Heuzey, M.-C., Randall, J., & Carreau, P. (2022). Enhanced properties of polylactide/polyamide 11 blends by reactive compatibilization. Canadian Journal of Chemical Engineering, 100(9), 2475-2490. Lien externe
Mehrotra, A. K., Soares, J. B. P., Nandakumar, K., Carreau, P., Epstein, N., & Patience, G. S. (2022). A perspective on The Canadian Journal of Chemical Engineering commemorating its 100th volume: 1929-2021. The Canadian Journal of Chemical Engineering, 100(9), 1983-2010. Lien externe
Ghanbari, A., Heuzey, M.-C., & Carreau, P. (2022). Polyethylene terephthalate/organoclay nanocomposites: Improvement of morphology and viscoelastic properties by using a chain-extender. Applied Clay Science, 225, 106551 (9 pages). Lien externe
Santoni, A., Guo, M. C., Heuzey, M.-C., & Carreau, P. (2022). Surface Defects of TPO Injected Foam Parts for Automotive Applications. International Polymer Processing, 22(2), 204-212. Lien externe
Mohammadi, M., Heuzey, M.-C., Carreau, P., & Taguet, A. (2021). Morphological and rheological properties of PLA, PBAT, and PLA/PBAT blend nanocomposites containing CNCs. Nanomaterials, 11(4), 857 (20 pages). Disponible
Ghanbari, A., Heuzey, M.-C., & Carreau, P. (2021). The Effect of Nanosilicates on the Performance of Polyethylene Terephthalate Films Prepared by Twin-Screw Extrusion. International Polymer Processing, 36(4), 358-366. Lien externe
Mohammadi, M., Heuzey, M.-C., Carreau, P., & Taguet, A. (2021). Interfacial localization of CNCs in PLA/PBAT blends and its effect on rheological, thermal, and mechanical properties. Polymer, 233, 12 pages. Lien externe
Mohammadi, M., Heuzey, M.-C., & Carreau, P. (2021). Morphological, thermal, and mechanical properties of cellulose nanocrystal reinforced poly(lactic acid) and poly(butylene adipate-co-terephthalate): A comparative study on common and novel solvent casting methods. Polymer Composites, 42(12), 6688-6703. Lien externe
Nofar, M., Mohammadi, M., & Carreau, P. (2021). Nanoclay Migration and the Rheological Response of PBAT/LDPE Blends. International Polymer Processing, 36(3), 287-296. Lien externe
Taguet, A., Mohammadi, M., Heuzey, M.-C., & Carreau, P. (octobre 2021). Polymer Blend Nanocomposites Based on Cellulose Nanocrystals (CNC) [Présentation]. Dans 7th International Polysaccharide Conference (EPNOE 2021), Nantes, France. Lien externe
Wang, C.-S., Chapelle, G., Carreau, P., & Heuzey, M.-C. (2021). Prediction of sag resistance in paints using rheological measurements. Progress in Organic Coatings, 153, 7 pages. Lien externe
Mousavi, Z., Heuzey, M.-C., Kamal, M. R., Flahaut, E., & Carreau, P. (2021). Rheological, electrical, and dynamic thermomechanical properties: Comparison between multiwall and double-wall carbon nanotubes in polylactide and polyamide 11. Physics of Fluids, 33(11), 13 pages. Lien externe
Nofar, M., Mohammadi, M., & Carreau, P. (2021). Super enhancement of rheological properties of amorphous PLA through generation of a fiberlike oriented crystal network. Journal of Rheology, 65(4), 493-505. Lien externe
Wang, C.-S., Virgilio, N., Carreau, P., & Heuzey, M.-C. (2021). Understanding the Effect of Conformational Rigidity on Rheological Behavior and Formation of Polysaccharide-Based Hybrid Hydrogels. Biomacromolecules, 22(9), 4016-4026. Lien externe
Dunlop, M. J., Clemons, C., Reiner, R., Sabo, R., Agarwal, U. P., Bissessur, R., Sojoudiasli, H., Carreau, P., & Acharya, B. (2020). Towards the scalable isolation of cellulose nanocrystals from tunicates. Scientific Reports, 10(1), 19090 (13 pages). Disponible
Bruel, C., Queffeulou, S., Carreau, P., Tavares, J. R., & Heuzey, M.-C. (2020). Orienting Cellulose Nanocrystal Functionalities Tunes the Wettability of Water-Cast Films. Langmuir, 36(41), 12179-12189. Disponible
Nofar, M., Heuzey, M.-C., Carreau, P., & Kamal, M. R. (2020). Nanoparticle Interactions and Molecular Relaxation in PLA/PBAT/Nanoclay Blends. Experimental results, 1(e47), 12 pages. Disponible
Mohammadi, M., Bruel, C., Heuzey, M.-C., & Carreau, P. (2020). CNC dispersion in PLA and PBAT using two solvents: morphological and rheological properties. Cellulose, 27(17), 9877-9892. Lien externe
Nofar, M., Mohammadi, M., & Carreau, P. (2020). Effect of TPU hard segment content on the rheological and mechanical properties of PLA/TPU blends. Journal of Applied Polymer Science, 137(45), 49387 (11 pages). Lien externe
Ghanbari, A., Mousavi, Z., Heuzey, M.-C., Patience, G. S., & Carreau, P. (2020). Experimental methods in chemical engineering: Rheometry. Canadian Journal of Chemical Engineering, 98(7), 1456-1470. Lien externe
Bruel, C., Davies, T. S., Carreau, P., Tavares, J. R., & Heuzey, M.-C. (2020). Self-assembly behaviors of colloidal cellulose nanocrystals: A tale of stabilization mechanisms. Journal of Colloid and Interface Science, 574, 399-409. Lien externe
Bruel, C., Tavares, J. R., Carreau, P., & Heuzey, M.-C. (2019). The structural amphiphilicity of cellulose nanocrystals characterized from their cohesion parameters. Carbohydrate Polymers, 205, 184-191. Disponible
Khandal, D., Riedl, B., Tavares, J. R., Carreau, P., & Heuzey, M.-C. (2019). Tailoring cellulose nanocrystals rheological behavior in aqueous suspensions through surface functionalization with polyethyleneimine. Physics of Fluids, 31(2), 021207. Disponible
Bagheriasl, D., Safdari, F., Carreau, P., Dubois, C., & Riedl, B. (2019). Development of cellulose nanocrystal-reinforced polylactide: A comparative study on different preparation methods. Polymer Composites, 40(S1), E342-E349. Lien externe
Heuzey, M.-C., Tavares, J. R., Carreau, P., Bruel, C., Girard, M., & Nakhle, W. (février 2019). Dispersion of CNCs in polar and non-polar media: dictated by surface properties, improved by sonication and quantified by rheology [Présentation]. Dans PaperWeek Nanocellulose Challenge Symposium, Montréal, Québec, Canada. Non disponible
Bruel, C., Tavares, J. R., Carreau, P., & Heuzey, M.-C. (juin 2019). Impact of colloidal stability on cellulose nanocrystals self-ordering in thin films [Présentation]. Dans TechConnect World Innovation Conference and Expo, Boston, MA, USA. Lien externe
Nakhle, W., Bruel, C., Girard, M., Carreau, P., Tavares, J. R., & Heuzey, M.-C. (février 2019). Intrinsic viscosity & rheological properties of crystalline nanocellulose as functions of dispersion [Affiche]. PaperWeek Nanocellulose Challenge Symposium, Montréal, Québec, Canada. Non disponible
Bruel, C., Tavares, J. R., Carreau, P., & Heuzey, M.-C. (octobre 2019). Non-aqueous dispersion and self-ordering of cellulose nanocrystals [Présentation]. Dans 69th Canadian Chemical Engineering Conference (CSChE Conferences 2019), Halifax, NS, CA. Non disponible
Nofar, M., Sacligil, D., Carreau, P., Kamal, M. R., & Heuzey, M.-C. (2019). Poly (lactic acid) blends: processing, properties and applications. International Journal of Biological Macromolecules, 125, 307-360. Lien externe
Bruel, C., Tavares, J. R., Carreau, P., & Heuzey, M.-C. (février 2019). Promotion of CNC self-assembly in non-aqueous solvents [Présentation]. Dans PaperWeek Nanocellulose Challenge Symposium, Montréal, Québec, Canada. Non disponible
Bruel, C., Davies, T. S., Tavares, J. R., Carreau, P., & Heuzey, M.-C. (juin 2019). Promotion of CNC self-ordering in non-aqueous solvents [Affiche]. CREPEC Student Colloquium, Montréal, Québec, Canada. Non disponible
Bruel, C., Davies, T. S., Tavares, J. R., Carreau, P., & Heuzey, M.-C. (mai 2019). Promotion of CNC self-ordering in non-aqueous solvents [Affiche]. 6e atelier du GDRI Nanomatériaux multifonctionnels composites, Jouvence, Québec, Canada. Non disponible
Bruel, C., Tavares, J. R., Carreau, P., & Heuzey, M.-C. (mars 2019). Promotion of CNC self-ordering in non-aqueous solvents [Présentation]. Dans Chemical Engineering Research Day, Montréal, Québec , Canada. Non disponible
Nakhle, W., Tavares, J. R., Carreau, P., & Heuzey, M.-C. (mars 2019). Rheoproperties of CNC suspensions [Présentation]. Dans Chemical Engineering Research Day, Montréal, Québec, Canada. Non disponible
Bruel, C., Beuguel, Q., Tavares, J. R., Carreau, P., & Heuzey, M.-C. (2018). The apparent structural hydrophobicity of cellulose nanocrystals. J-FOR The Journal of Science and Technology for Forest Products and Processes, 7(4), 13-23. Disponible
Beuguel, Q., Bagheriasl, D., Bruel, C., Tavares, J. R., Carreau, P., & Heuzey, M.-C. (2018). Comportement rhéologique à l'état fondu de nanocomposites à base de nanocristaux de cellulose (CNCs). Rhéologie (34), 10-16. Disponible
Bagheriasl, D., Carreau, P., Riedl, B., & Dubois, C. (2018). Enhanced properties of polylactide by incorporating cellulose nanocrystals. Polymer Composites, 39(8), 2685-2694. Lien externe
Sojoudiasli, H., Heuzey, M.-C., & Carreau, P. (2018). Mechanical and morphological properties of cellulose nanocrystal-polypropylene composites. Polymer Composites, 39(10), 3605-3617. Lien externe
Zakeri, B., Khandal, D., Beuguel, Q., Riedl, B., Tavares, J. R., Carreau, P., & Heuzey, M.-C. (2018). Non-covalent surface modification of cellulose nanocrystals by polyethyleneimine. J-FOR The Journal of Science and Technology for Forest Products and Processes, 7(4), 6-12. Disponible
Beuguel, Q., Tavares, J. R., Carreau, P., & Heuzey, M.-C. (2018). Rheological behavior of cellulose nanocrystal suspensions in polyethylene glycol. Journal of Rheology, 62(2), 607-618. Disponible
Safdari, F., Bagheriasl, D., Carreau, P., Heuzey, M.-C., & Kamal, M. R. (2018). Rheological, mechanical, and thermal properties of polylactide/cellulose nanofiber biocomposites. Polymer Composites, 39(5), 1752-1762. Lien externe
Beuguel, Q., Tavares, J. R., Carreau, P., & Heuzey, M.-C. (2018). Ultrasonication of spray- and freeze-dried cellulose nanocrystals in water. Journal of Colloid and Interface Science, 516, 23-33. Disponible
Sheikhi, A., Yang, H., Carreau, P., & van de Ven, T. G. M. (2017). Colloidal nano-toolbox for molecularly regulated polymerization: chemorheology over 6 decades of viscoelasticity. Materials Horizons, 4(6), 1165-1170. Lien externe
Lenfant, G., Heuzey, M.-C., van de Ven, T. G. M., & Carreau, P. (2017). A comparative study of ECNC and CNC suspensions: effect of salt on rheological properties. Rheologica Acta, 56(1), 51-62. Lien externe
Safdari, F., Carreau, P., Heuzey, M.-C., & Kamal, M. R. (2017). Effects of poly(ethylene glycol) on the morphology and properties of biocomposites based on polylactide and cellulose nanofibers. Cellulose, 24(7), 2877-2893. Lien externe
Safdari, F., Carreau, P., Heuzey, M.-C., Kamal, M. R., & Sain, M. M. (2017). Enhanced properties of poly(ethylene oxide)/cellulose nanofiber biocomposites. Cellulose, 24(2), 755-767. Lien externe
Lenfant, G., Heuzey, M.-C., van de Ven, T. G. M., & Carreau, P. (2017). Gelation of crystalline nanocellulose in the presence of hydroxyethyl cellulose. Canadian Journal of Chemical Engineering, 95(10), 1891-1900. Lien externe
Nofar, M., Tabatabaei, A., Sojoudiasli, H., Park, C. B., Carreau, P., Heuzey, M.-C., & Kamal, M. R. (2017). Mechanical and bead foaming behavior of PLA-PBAT and PLA-PBSA blends with different morphologies. European Polymer Journal, 90, 231-244. Lien externe
Shahverdi-Shahraki, K., Ajji, A., Carreau, P., Ghosh, T., & Mahajan, K. (2017). PET nanocomposite materials and containers prepared therefrom. (Brevet no US9676926). Lien externe
Sojoudiasli, H., Heuzey, M.-C., Carreau, P., & Riedl, B. (2017). Rheological behavior of suspensions of modified and unmodified cellulose nanocrystals in dimethyl sulfoxide. Rheologica Acta, 56(7-8), 673-682. Lien externe
Nofar, M., Tabatabaei, A., Park, C. B., Carreau, P., Heuzey, M.-C., & Kamal, M. R. (mai 2017). Wide-range of microcellular bead foams from different PLA-based drop/sea blend morphologies [Communication écrite]. 75th Annual Technical Conference and Exhibition of the Society of Plastics Engineers (SPE ANTEC 2017), Anaheim, CA. Lien externe
Nofar, M., Heuzey, M.-C., Carreau, P., Kamal, M. R., & Randall, J. (2016). Coalescence in PLA-PBAT blends under shear flow: Effects of blend preparation and PLA molecular weight. Journal of Rheology, 60(4), 637-648. Lien externe
Nofar, M., Heuzey, M.-C., Carreau, P., & Kamal, M. R. (2016). Effects of nanoclay and its localization on the morphology stabilization of PLA/PBAT blends under shear flow. Polymer, 98, 353-364. Lien externe
Natale, G., Ausias, G., Ferec, J., Heuzey, M.-C., & Carreau, P. (2016). Modeling interactions in carbon nanotube suspensions: Transient shear flow. Journal of Rheology, 60(6), 1069-1083. Lien externe
Ghanbari, A., Heuzey, M.-C., Carreau, P., & Ton-That, M.-T. (2016). Morphology and gas barrier properties of polymer nanocomposites. Dans Polymer Morphology : Principles, Characterization, and Processing (397-417). Lien externe
Shahverdi-Shahraki, K., Ghosh, T., Mahajan, K., Ajji, A., & Carreau, P. (2016). Morphology and thermal properties of poly(ethylene terephthalate)-modified kaolin nanocomposites. Polymer Composites, 37(5), 1443-1452. Lien externe
Saffar, A., Jalali Dil, E., Carreau, P., Ajji, A., & Kamal, M. R. (2016). Phase behavior of binary blends of PP/PP‐g‐AA: limitations of the conventional characterization techniques. Polymer International, 65(5), 508-515. Lien externe
Maani, A., & Carreau, P. (2016). Rheological and morphological properties of thermoplastic olefin blends containing nanosilica. Journal of Non-Newtonian Fluid Mechanics, 233, 95-106. Lien externe
Najafi Chaloupli, N., Heuzey, M.-C., Carreau, P., & Therriault, D. (2015). Quiescent and shear-induced crystallization of linear and branched polylactides. Rheologica Acta, 54(9-10), 831-845. Disponible
Bagheriasl, D., Carreau, P., Dubois, C., & Riedl, B. (juin 2014). Effect of cellulose nanocrystals (CNCs) on crystallinity, mechanical and rheological properties of polypropylene/CNCs nanocomposites [Communication écrite]. 30th International Conference of the Polymer Processing Society (PPS-30), Cleveland, Ohio, USA (5 pages). Lien externe
Shahverdi-Shahraki, K., Ghosh, T., Mahajan, K., Ajji, A., & Carreau, P. (2015). Effect of dry grinding on chemically modified kaolin. Applied Clay Science, 105-106, 100-106. Lien externe
Kolahchi, A. R., Ajji, A., & Carreau, P. (2015). Enhancing Hydrophilicity of Polyethylene Terephthalate Surface Through Melt Blending. Polymer Engineering and Science, 55(2), 349-358. Lien externe
Kolahchi, A. R., Ajji, A., & Carreau, P. (juin 2014). Improvement of PET surface hydrophilicity and roughness through blending [Communication écrite]. 30th International Conference of the Polymer Processing Society (PPS-30), Cleveland, Ohio, USA (4 pages). Lien externe
Nofar, M., Maani, A., Sojoudi, H., Heuzey, M.-C., & Carreau, P. (2015). Interfacial and rheological properties of PLA/PBAT and PLA/PBSA blends and their morphological stability under shear flow. Journal of Rheology, 59(2), 317-333. Lien externe
Lenfant, G., Heuzey, M.-C., van de Ven, T. G. M., & Carreau, P. (2015). Intrinsic viscosity of suspensions of electrosterically stabilized nanocrystals of cellulose. Cellulose, 22(2), 1109-1122. Lien externe
Najafi, N., Heuzey, M.-C., Carreau, P., Therriault, D., & Park, C. B. (2015). Mechanical and morphological properties of injection molded linear and branched-polylactide (PLA) nanocomposite foams. European Polymer Journal, 73, 455-465. Lien externe
Jalali Dil, E., Carreau, P., & Favis, B. D. (2015). Morphology, miscibility and continuity development in poly(lactic acid)/poly(butylene adipate-co-terephthalate) blends. Polymer, 68, 202-212. Lien externe
Shahverdi-Shahraki, K., Ghosh, T., Mahajan, K., Ajji, A., & Carreau, P. (2015). Polyethylene terephthalate/calcined kaolin composites: Effect of uniaxial stretching on the properties. Polymer Engineering and Science, 55(8), 1767-1775. Lien externe
Bagheriasl, D., Carreau, P., Dubois, C., & Riedl, B. (2015). Properties of polypropylene and polypropylene/poly(ethylene-co-vinyl alcohol) blend/CNC nanocomposites. Composites Science and Technology, 117, 357-363. Lien externe
Natale, G., Reddy, N. K., Ausias, G., Ferec, J., Heuzey, M.-C., & Carreau, P. (2015). Rheo-optical response of carbon nanotube suspensions. Journal of Rheology, 59(2), 499-524. Lien externe
Saffar, A., Tabatabaei, S. H., Carreau, P., Ajji, A., & Kamal, M. R. (2015). Rheology of PP/PP-g-MA and PP/PP-g-AA Blends and Incidence on Orientation and Crystalline Structure of Their Cast Films. Industrial & Engineering Chemistry Research, 54(43), 10787-10795. Lien externe
Najafi Chaloupli, N., Heuzey, M.-C., Carreau, P., Therriault, D., & Park, C. B. (2014). Rheological and foaming behavior of linear and branched polylactides. Rheologica Acta, 53(10-11), 779-790. Disponible
Abbasi, S., Derdouri, A., & Carreau, P. (2014). Carbon nanotube conductive networks through the double percolation concept in polymer systems. International Polymer Processing, 29(1), 13-27. Lien externe
Saffar, A., Ajji, A., Carreau, P., & Katnal, M. R. (avril 2014). Development of polypropylene microporous hydrophilic membranes by blending with acrylic acid grafted polypropylene [Communication écrite]. 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2014), Las Vegas, NV, United states. Lien externe
Saffar, A., Carreau, P., Ajji, A., & Kamal, M. R. (2014). Development of polypropylene microporous hydrophilic membranes by blending with PP-g-MA and PP-g-AA. Journal of Membrane Science, 462, 50-61. Lien externe
Dini, M., Mousavand, T., Carreau, P., Kamal, M. R., & Ton-That, M.-T. (2014). Effect of water-assisted extrusion and solid-state polymerization on the microstructure of PET/Clay nanocomposites. Polymer Engineering and Science, 54(8), 1723-1736. Lien externe
Keshtkar, M., Nofar, M., Park, C. B., & Carreau, P. (2014). Extruded PLA/clay nanocomposite foams blown with supercritical CO 2. Polymer, 55(16), 4077-4090. Lien externe
Meng, Q., Heuzey, M.-C., & Carreau, P. (2014). Hierarchical Structure and Physicochemical Properties of Plasticized Chitosan. Biomacromolecules, 15(4), 1216-1224. Lien externe
Saffar, A., Carreau, P., Kamal, M. R., & Ajji, A. (2014). Hydrophilic modification of polypropylene microporous membranes by grafting TiO2 nanoparticles with acrylic acid groups on the surface. Polymer, 55(23), 6069-6075. Lien externe
Saffar, A., Ajji, A., Carreau, P., & Kamal, M. R. (2014). The impact of new crystalline lamellae formation during annealing on the properties of polypropylene based films and membranes. Polymer Engineering and Science, 55(14), 3156-3167. Lien externe
Saffar, A., Carreau, P., Ajji, A., & Kamal, M. R. (2014). Influence of Stretching on the Performance of Polypropylene-Based Microporous Membranes. Industrial & Engineering Chemistry Research, 53(36), 14014-14021. Lien externe
Dini, M., Mousavand, T., Carreau, P., Kamal, M. R., & Ton-That, M.-T. (2014). Microstructure and properties of poly(ethylene terephthalate)/organoclay nanocomposites prepared by water-assisted extrusion: Effect of organoclay concentration. Polymer Engineering and Science, 54(8), 1879-1892. Lien externe
Natale, G., Heuzey, M.-C., Carreau, P., Ausias, G., & Ferec, J. (2014). Rheological modeling of carbon nanotube suspensions with rod-rod interactions. AICHE Journal, 60(4), 1476-1487. Lien externe
Sojoudiasli, H.;., Carreau, P., & Heuzey, M.-C. (2014). Rheological, morphological and mechanical properties of flax fiber polypropylene composites: influence of compatibilizers. Cellulose, 21(5), 3797-3812. Lien externe
Dini, M., Carreau, P., Kamal, M. R., Ton-That, M.-T., & Esmaeili, B. (2014). Solid-state polymerization of poly(ethylene terephthalate): Effect of organoclay concentration. Polymer Engineering and Science, 54(12), 2925-2937. Lien externe
Kolahchi, A. R., Ajji, A., & Carreau, P. (2014). Surface Morphology and Properties of Ternary Polymer Blends: Effect of the Migration of Minor Components. Journal of Physical Chemistry B, 118(23), 6316-6323. Lien externe
Kolahchi, A. R., Carreau, P., & Ajji, A. (2014). Surface Roughening of PET Films through Blend Phase Coarsening. ACS Applied Materials & Interfaces, 6(9), 6415-6424. Lien externe
Najafi, N., Heuzey, M.-C., & Carreau, P. (2013). Crystallization behavior and morphology of polylactide and PLA/clay nanocomposites in the presence of chain extenders. Polymer Engineering and Science, 53(5), 1053-1064. Lien externe
Maani, A., Naguib, H. E., Heuzey, M.-C., & Carreau, P. (2013). Foaming behavior of microcellular thermoplastic olefin blends. Journal of Cellular Plastics, 49(3), 223-244. Lien externe
Esmaeili, B., Dubois, C., Carreau, P., & Heuzey, M.-C. (2013). In situ polymerization of PET in the presence of pristine and organo-modified clays. International Polymer Processing, 28(3), 331-340. Lien externe
Ghanbari, A., Heuzey, M.-C., Carreau, P., & Ton-That, M. T. (2013). Morphological and Rheological Properties of Pet/Clay Nanocomposites. Rheologica Acta, 52(1), 59-74. Lien externe
Ghanbari, A., Heuzey, M.-C., Carreau, P., & Ton-That, M.-T. (2013). Morphology and properties of polymer/organoclay nanocomposites based on poly(ethylene terephthalate) and sulfopolyester blends. Polymer International, 62(3), 439-448. Lien externe
Ghanbari, A., Heuzey, M.-C., Carreau, P., & Ton-That, M. T. (2013). A novel approach to control thermal degradation of PET/organoclay nanocomposites and improve clay exfoliation. Polymer, 54(4), 1361-1369. Lien externe
Najafi, N., Heuzey, M.-C., Carreau, P., & Wood-Adams, P. M. (2012). Control of Thermal Degradation of Polylactide (Pla)-Clay Nanocomposites Using Chain Extenders. Polymer Degradation and Stability, 97(4), 554-565. Lien externe
Meng, Q. K., Heuzey, M.-C., & Carreau, P. (2012). Control of Thermal Degradation of Polylactide/Clay Nanocomposites During Melt Processing by Chain Extension Reaction. Polymer Degradation and Stability, 97(10), 2010-2020. Lien externe
Khalkhal, F., & Carreau, P. (2012). Critical Shear Rates and Structure Build-up at Rest in Mwcnt Suspensions. Journal of Non-Newtonian Fluid Mechanics, 171, 56-66. Lien externe
Rezaei Kolahchi, A., Ajji, A., & Carreau, P. (avril 2012). Effect of stabilizers, molecular weight and environment on thermal stability of Polyethylene Glycol (PEG) [Communication écrite]. 70th Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2012), Orlando, FL, United states. Lien externe
Meng, Q.-K., Heuzey, M.-C., & Carreau, P. (2012). Effects of a multifunctional polymeric chain extender on the properties of polylactide and polylactide/clay nanocomposites. International Polymer Processing, 27(5), 505-516. Lien externe
Ghasemi, H., Carreau, P., & Kamal, M. R. (2012). Isothermal and Non-Isothermal Crystallization Behavior of Pet Nanocomposites. Polymer Engineering and Science, 52(2), 372-384. Lien externe
Shahbikian, S., Carreau, P., Heuzey, M.-C., Ellul, M. D., Cheng, J., Shirodkar, P., & Nadella, H. P. (2012). Morphology Development of Epdm/Pp Uncross-Linked/Dynamically Cross-Linked Blends. Polymer Engineering and Science, 52(2), 309-322. Lien externe
Jalali Dil, E., Carreau, P., Ravati, S., & Favis, B. D. (avril 2012). Morphology of poly(lactic acid)/poly(butylene adipate-co-terephthalate) blends and its composite with spherical silica particles [Communication écrite]. 70th Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2012), Orlando, FL, United states. Lien externe
Dini, M., Carreau, P., Mousavand, T., Kamal, M. R., & Ton-That, M.-T. (avril 2012). A novel method to prepare pet nanocomposites by water-assisted melt compounding [Communication écrite]. 70th Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2012), Orlando, FL, United states. Lien externe
Najafi, N., Heuzey, M.-C., & Carreau, P. (2012). Polylactide (Pla)-Clay Nanocomposites Prepared by Melt Compounding in the Presence of a Chain Extender. Composites Science and Technology, 72(5), 608-615. Lien externe
Ghasemi, H., Carreau, P., Kamal, M. R., & Tabatabaei, S. H. (2012). Properties of Pet/Clay Nanocomposite Films. Polymer Engineering and Science, 52(2), 420-430. Lien externe
Maani, A., Blais, B., Heuzey, M.-C., & Carreau, P. (2012). Rheological and Morphological Properties of Reactively Compatibilized Thermoplastic Olefin (TPO) Blends. Journal of Rheology, 56(3), 625-647. Lien externe
Maani, A., Heuzey, M.-C., & Carreau, P. (2011). Coalescence in thermoplastic olefin (TPO) blends under shear flow. Rheologica Acta, 50(11-12), 881-895. Lien externe
Khalkhal, F., Carreau, P., & Ausias, G. (2011). Effect of flow history on linear viscoelastic properties and the evolution of the structure of multiwalled carbon nanotube suspensions in an epoxy. Journal of Rheology, 55(1), 153-175. Lien externe
Xu, X. F., Ghanbari, A., Leelapornpisit, W., Heuzey, M.-C., & Carreau, P. (2011). Effect of ionomer on barrier and mechanical properties of PET/Organoclay nanocompoistes prepared by Melt compounding. International Polymer Processing, 26(4), 444-455. Lien externe
Rajabian, M., Naderi, G., Carreau, P., & Dubois, C. (2011). Erratum: Flow-induced particle orientation and rheological properties of suspensions of organoclays in thermoplastic resins. Journal of Polymer Science. Part B: Polymer Physics, 49(5), 398-398. Lien externe
Hadj Henni, A., Schmitt, C., Tremblay, M.-E., Hamdine, M., Heuzey, M.-C., Carreau, P., & Cloutier, G. (2011). Hyper-frequency viscoelastic spectroscopy of biomaterials. Journal of the Mechanical Behavior of Biomedical Materials, 4(7), 1115-1122. Lien externe
Shahbikian, S., Carreau, P., Heuzey, M.-C., Ellul, M. D., Nadella, H. P., Cheng, J., & Shirodkar, P. (2011). Morphology and rheology of nonreactive and reactive EPDM/PP blends in transient shear flow: Plasticized versus nonplasticized blends. Rubber Chemistry and Technology, 84(3), 325-353. Lien externe
Ghasemi, H., Carreau, P., Kamal, M. R., & Uribe-Calderon, J. (2011). Preparation and characterization of PET/clay nanocomposites by melt compounding. Polymer Engineering and Science, 51(6), 1178-1187. Lien externe
Abbasi, S., Derdouri, A., & Carreau, P. (2011). Properties of microinjection molding of polymer multiwalled carbon nanotube conducting composites. Polymer Engineering and Science, 51(5), 992-1003. Lien externe
Shahbikian, S., Carreau, P., Heuzey, M.-C., Ellul, M. D., Nadella, H. P., Cheng, J., & Shirodkar, P. (2011). Rheology/morphology relationship of plasticized and nonplasticized thermoplastic elastomers based on ethylene-propylene-diene-terpolymer and polypropylene. Polymer Engineering and Science, 51(11), 2314-2327. Lien externe
Meng, Q., Heuzey, M.-C., Carreau, P., & De Kee, D. (mai 2011). Thermo-mechanical properties and thermal degradation control of poly (lactic acid) and poly (lactic acid)/clay/wood nanocomposites [Communication écrite]. 69th Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2011), Boston, MA, United states. Non disponible
Pujari, S., Dougherty, L., Mobuchon, C., Carreau, P., Heuzey, M.-C., & Burghardt, W. R. (2011). X-ray scattering measurements of particle orientation in a sheared polymer/clay dispersion. Rheologica Acta, 50(1), 3-16. Lien externe
Tabatabaei, S. H., Carreau, P., & Ajji, A. (2010). Cast films, microporous membranes, and method of preparation thereof. (Demande de brevet no WO2010148492). Lien externe
Abbasi, S., Carreau, P., & Derdouri, A. (2010). Flow induced orientation of multiwalled carbon nanotubes in polycarbonate nanocomposites: Rheology, conductivity and mechanical properties. Polymer, 51(4), 922-935. Lien externe
Ahmadi, S., Morshedian, J., Hashemi, S. A., Carreau, P., & Leelapornpisit, W. (2010). Novel anionic polymerization of -caprolactam towards polyamide 6 containing nanofibrils. Iranian Polymer Journal (English Edition), 19(3), 229-240. Lien externe
Sadeghi, F., Tabatabaei, S. H., Ajji, A., & Carreau, P. (2010). Properties of uniaxially stretched polypropylene films: Effect of drawing temperature and random copolymer content. Canadian Journal of Chemical Engineering, 88(6), 1091-1098. Lien externe
Keshtkar, M., Heuzey, M.-C., Carreau, P., Rajabian, M., & Dubois, C. (2010). Rheological properties and microstructural evolution of semi-flexible fiber suspensions under shear flow. Journal of Rheology, 54(2), 197-222. Lien externe
Tabatabaei, S. H., Carreau, P., & Ajji, A. (2010). Rheological Properties of Blends of Linear and Long-Chain Branched Polypropylenes. Polymer Engineering and Science, 50(1), 191-199. Lien externe
Keshtkar, M., Heuzey, M.-C., & Carreau, P. (2010). Rheology of LDPE-based semiflexible fiber suspensions. Polymer Composites, 31(8), 1474-1486. Lien externe
Utracki, L. A., Sepehr, M. M., & Carreau, P. (2010). Rheology of Polymers with Nanofillers. Dans Polymer Physics : From Suspensions to Nanocomposites and Beyond (639-708). Lien externe
Sadeghi, F., Tabatabei, H., Carreau, P., & Ajji, A. (février 2010). Structure and properties of PP films: Effect of cast film process conditions, MDO stretching and blending with a random PP [Communication écrite]. International Polyolefins Conference, Houston, TX, United states. Non disponible
Hesam, G., Carreau, P., Kamal, M. R., & Tabatabaei, S. H. (mai 2010). Study on morphology, crystallinity, barrier and mechanical properties of PET nanocomposite films [Communication écrite]. 68th Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2010), Orlando, Florida USA. Lien externe
Mobuchon, C., Carreau, P., Heuzey, M.-C., Reddy, N. K., & Vermant, J. (2009). Anisotropy of nonaqueous layered silicate suspensions subjected to shear flow. Journal of Rheology, 53(3), 517-538. Lien externe
Maani, A., Heuzey, M.-C., Carreau, P., & Khennache, O. (juin 2009). Cell structure of injection molded thermoplastic olefin foams [Communication écrite]. 67th Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2009), Chicago, IL, United states. Lien externe
Abbasi, S., Derdouri, A., & Carreau, P. (juin 2009). Effect of crystalline structure on morphology and properties of MWCNT nanocomposites [Communication écrite]. 67th Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2009), Chicago, IL, United states. Lien externe
Parent, L., Cigana, P., Ajji, A., & Carreau, P. (juin 2009). Effect of machine direction orientation conditions on structure and properties of hdpe films [Communication écrite]. 67th Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2009), Chicago, IL, United states. Lien externe
Abbasi, S., Derdouri, A., & Carreau, P. (août 2009). Effect of nanotube alignment on the morphology and properties of Polycarbonate/MWCNT nanocomposites [Communication écrite]. 8th World Congress of Chemical Engineering, Montréal, Québec. Non disponible
Tabatabaei, S. H., Carreau, P., & Ajji, A. (2009). Effect of processing on the crystalline orientation, morphology, and mechanical properties of polypropylene cast films and microporous membrane formation. Polymer, 50(17), 4228-4240. Lien externe
Sadeghi, F., Tabatabaei, S. H., Ajji, A., & Carreau, P. (2009). Effect of PVDF characteristics on extruded film morphology and porous membranes feasibility by stretching. Journal of Polymer Science. Part B: Polymer Physics, 47(12), 1219-1229. Lien externe
Ferec, J., Heuzey, M.-C., Perez-Gonzalez, J., Vargas, L., Ausias, G., & Carreau, P. (2009). Investigation of the rheological properties of short glass fiber-filled polypropylene in extensional flow. Rheologica Acta, 48(1), 59-72. Lien externe
Tabatabaei, S. H., Carreau, P., & Ajji, A. (2009). Microporous membranes obtained from PP/HDPE multilayer films by stretching. Journal of Membrane Science, 345(1-2), 148-159. Lien externe
Ferec, J., Ausias, G., Heuzey, M.-C., & Carreau, P. (2009). Modeling fiber interactions in semiconcentrated fiber suspensions. Journal of Rheology, 53(1), 49-72. Lien externe
Shahbikian, S., Carreau, P., Heuzey, M.-C., Ellul, M. D., Nadella, H. P., Cheng, J., & Shirodkar, P. (octobre 2009). Morphology and rheology of non-reactive and reactive EPDM/PP blends in transient shear flow: plasticized vs. Non-plasticized blends [Communication écrite]. 176th Technical meeting of the ACS Rubber Division, Fall 2009, Pittsburgh, PA., USA. Lien externe
Ghasemi, H., Carreau, P., & Kamal, M. R. (juin 2009). PET/clay nanocomposites by melt compounding [Communication écrite]. 67th Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2009), Chicago, IL, United states. Lien externe
Cigana, P., Parent, L., Tabatabei, H., Sadeghi, F., Carreau, P., & Ajji, A. (février 2009). Process, structure and properties of cast and MDO stretched films of HDPE, PP and blends of random and linear PPS [Communication écrite]. International Polyolefins Conference, Houston, Tx, USA. Non disponible
Tabatabaei, S. H., Carreau, P., & Ajji, A. (2009). Rheological and thermal properties of blends of a long-chain branched polypropylene and different linear polypropylenes. Chemical Engineering Science, 64(22), 4719-4731. Lien externe
Keshtkar, M., Heuzey, M.-C., & Carreau, P. (2009). Rheological behavior of fiber-filled model suspensions: effect of fiber flexibility. Journal of Rheology, 53(3), 631-650. Lien externe
Carreau, P., Abbasi, S., & Derdouri, A. (octobre 2009). Rheological properties and percolation behavior of polypropylene/multiwalled carbon nanotube composites [Communication écrite]. 81st Annual Meeting of the Society of Rheology, Madison, WI, USA. Lien externe
Abbasi, S., Carreau, P., Derdouri, A., & Moan, M. (2009). Rheological Properties and Percolation in Suspensions of Multiwalled Carbon Nanotubes in Polycarbonate. Rheologica Acta, 48(9), 943-959. Lien externe
Mobuchon, C., Carreau, P., & Heuzey, M.-C. (2009). Structural analysis of non-aqueous layered silicate suspensions subjected to shear flow. Journal of Rheology, 53(5), 1025-1048. Lien externe
Tabatabaei, S. H., Carreau, P., & Ajji, A. (2009). Structure and properties of MDO stretched polypropylene. Polymer, 50(16), 3981-3989. Lien externe
Rajabian, M., Dubois, C., Grmela, M., & Carreau, P. (2008). Effects of Polymer-Fiber Interactions on Rheology and Flow Behavior of Suspensions of Semi-Flexible Fibers in Polymeric Liquids. Rheologica Acta, 47(7), 701-717. Lien externe
Rajabian, M., Naderi, G., Beheshty, M. H., Lafleur, P., Dubois, C., & Carreau, P. (2008). Experimental Study and Modeling of Flow Behavior and Orientation Kinetics of Layered Silicate/Polypropylene Nanocomposites in Start-up of Shear Flows. International Polymer Processing, 23(1), 110-118. Lien externe
Tabatabaei, S. H., Carreau, P., & Ajji, A. (juin 2008). Microporous membranes obtained from polypropylene blend films by stretching [Communication écrite]. Polymer Processing International Meeting, Salerno, Italy. Non disponible
Tabatabaei, S. H., Carreau, P., & Ajji, A. (2008). Microporous membranes obtained from polypropylene blend films by stretching. Journal of Membrane Science, 325(2), 772-782. Lien externe
Sadeghi, F., Ajji, A., & Carreau, P. (2008). Microporous Membranes Obtained From Polypropylene Blends With Superior Permeability Properties. Journal of Polymer Science. Part B: Polymer Physics, 46(2), 148-157. Lien externe
Savarmand, S., Carreau, P., Bertrand, F., & Vidal, D. (juin 2008). Models for the rheology of clay-GCC coating colors [Communication écrite]. TAPPI Advanced Coating Fundamentals Symposium, Montréal, Québec. Lien externe
Abbasi, S., Derdouri, A., & Carreau, P. (juin 2008). Morphological electrical and mechanical properties of PC/MWCNT composites in different microinjection molding conditions [Communication écrite]. 24th Annual Meeting of the Polymer Processing society, Salerno, Italy. Non disponible
Abbasi, S., Leelapornpisit, W., Derdouri, A., & Carreau, P. (mai 2008). Morphology and properties of microinjected polycarbonate/MWCNT nanocomposites [Communication écrite]. 66th Annual Technical Conference of the Society of Plastics Engineers, Plastics Encounter at ANTEC 2008. Non disponible
Ferec, J., Heniche, M., Heuzey, M.-C., Ausias, G., & Carreau, P. (2008). Numerical Solution of the Fokker-Planck Equation for Fiber Suspensions: Application to the Folgar-Tucker-Lipscomb Model. Journal of Non-Newtonian Fluid Mechanics, 155(1-2), 20-29. Lien externe
Fang, Y., Sadeghi, F., Fleuret, G., & Carreau, P. (2008). Properties of Blends of Linear and Branched Polypropylenes in Film Blowing. Canadian Journal of Chemical Engineering, 86(1), 6-14. Lien externe
Sadeghi, F., & Carreau, P. (2008). Properties of uniaxially stretched polypropylene films. Canadian Journal of Chemical Engineering, 86(6), 1103-1110. Lien externe
Ferec, J., Heuzey, M.-C., Ausias, G., & Carreau, P. (2008). Rheological Behavior of Fiber-Filled Polymers Under Large Amplitude Oscillatory Shear Flow. Journal of Non-Newtonian Fluid Mechanics, 151(1-3), 89-100. Lien externe
Ausias, G., Férec, J., Heuzey, M.-C., Carreau, P., Fan, X., & Tanner, R. I. (janvier 2008). Rhéologie des suspensions non-diluées de fibres avec interactions entre particules [Communication écrite]. Colloque MECAMAT, Aussois, France. Lien externe
Tabatabaei, S. H., Carreau, P., & Ajji, A. (mai 2008). Rheology and properties of blends of two linear and a long-chain branched polypropylenes [Communication écrite]. 66th Annual Technical Conference of the Society of Plastics Engineers, Plastics Encounter at ANTEC 2008. Non disponible
Keshtkar, M., Heuzey, M.-C., & Carreau, P. (août 2008). Rheology of semi-flexible fiber suspensions [Communication écrite]. 15th International Congress on Rheology, Monterey, California. Lien externe
Abbasi, S., Derdouri, A., & Carreau, P. (août 2008). Rheology, morphology and temperature dependency of nanotube networks in polycarbonate/multiwalled carbon nanotube composites [Communication écrite]. 15th International Congress on Rheology, Monterey, CA. Lien externe
Shahibikian, S., Carreau, P., Heuzey, M.-C., Ellul, M. D., Shirodkar, P. P., & Cheng, J. (août 2008). Rheology/morphology relationship of immiscible EPDM/PP based thermoplastic elastomer blends [Communication écrite]. 15th International Congress on Rheology, Monterey, California. Lien externe
Sadeghi, F., Ajji, A., & Carreau, P. (2007). Analysis of Microporous Membranes Obtained From Polypropylene Films by Stretching. Journal of Membrane Science, 292(1), 62-71. Lien externe
Sadeghi, F., Ajji, A., & Carreau, P. (2007). Analysis of Row Nucleated Larnellar Morphology of Polypropylene Obtained From the Cast Film Process : Effect of Melt Rheology and Process Conditions. Polymer Engineering and Science, 47(7), 1170-1178. Lien externe
Savarmand, S., Heniche, M., Béchard, V., Bertrand, F., & Carreau, P. (2007). Analysis of the Vane Rheometer Using 3D Finite Element Simulation. Journal of Rheology, 51(2), 161-177. Lien externe
Guo, M. C., Heuzey, M.-C., & Carreau, P. (2007). Cell Structure and Dynamic Properties of Injection Molded Polypropylene Foams. Polymer Engineering and Science, 47(7), 1070-1081. Lien externe
Mobuchon, C., Carreau, P., & Heuzey, M.-C. (2007). Effect of Flow History on the Structure of a Non-Polar Polymer/Clay Nanocomposite Model System. Rheologica Acta, 46(8), 1045-1056. Lien externe
Huitric, J., Moan, M., Carreau, P., & Dufaure, N. (2007). Effect of Reactive Compatibilization on Droplet Coalescence in Shear Flow. Journal of Non-Newtonian Fluid Mechanics, 145(2-3), 139-149. Lien externe
Guo, M. C., Santoni, A., Heuzey, M.-C., & Carreau, P. (2007). Occurrence of Surface Defects in Tpo Injected Foam Parts. Journal of Cellular Plastics, 43(4-5), 273-296. Lien externe
Savarmand, S., Carreau, P., Bertrand, F., & Vidal, D. (octobre 2007). Rheology of Clay-GCC Coating Colors [Communication écrite]. 79th Annual Meeting of the Society of Rheology, Salt Lake City, Utah. Lien externe
Letwimolnun, W., Vergnes, B., Ausias, G., & Carreau, P. (2007). Stress Overshoots of Organoclay Nanocomposites in Transient Shear Flow. Journal of Non-Newtonian Fluid Mechanics, 141(2-3), 167-179. Lien externe
Cho, J. Y., Heuzey, M.-C., Begin, A., & Carreau, P. (2006). Chitosan and Glycerophosphate Concentration Dependence of Solution Behaviour and Gel Point Using Small Amplitude Oscillatory Rheometry. Food Hydrocolloids, 20(6), 936-945. Lien externe
Mobuchon, C., Heuzey, M.-C., & Carreau, P. (juillet 2006). Effect of Flow History on Structure Build-Up and Breakdown of Polymer/Clay Nanocomposite Model System [Communication écrite]. 3rd Brazilian Conference on Rheology, Rio de Janeiro, Brazil. Non disponible
Savarmand, S., Carreau, P., Bertrand, F., & Vidal, D. (octobre 2006). Effect of strongly repulsive particle interactions on the rheology of concentrated silica suspensions [Communication écrite]. 78th Annual Meeting of the Society of Rheology, Portland, ME, USA. Lien externe
Sosa, A., Carreau, P., Tanguy, P. A., Ascanio, G., & Guerrero, C. (2006). The effect of thickener on the rheology of coating colors. Chemical Engineering Communications, 193(8), 917-928. Lien externe
Cho, J., Heuzey, M.-C., Begin, A., & Carreau, P. (2006). Effect of Urea on Solution Behavior and Heat-Induced Gelation of Chitosan-Beta-Glycerophosphate. Carbohydrate polymer, 63(4), 507-518. Lien externe
Ascanio, G., Carreau, P., & Tanguy, P. A. (2006). High-Speed Roll Coating With Complex Rheology Fluids. Experiments in Fluids, 40(1), 1-14. Lien externe
Hashemi, S. A., Ait-Kadi, A., & Carreau, P. (2006). The influence of surface treatment of fibers on the properties of glass fiber/ PA 6,6 composites. Journal of Polymer Engineering, 26(1), 1-19. Lien externe
Mobuchon, C., Carreau, P., & Heuzey, M.-C. (avril 2023). Model Systems for the Rheological Investigation of Polymer/Clay Nanocomposite [Communication écrite]. 3rd Annual European Rheology Conference, Crete, Grèce. Non disponible
Guo, M. C., Heuzey, M.-C., & Carreau, P. (septembre 2006). Occurrence of Surface Defects in TPO Injection Foamed Automotive Parts [Communication écrite]. 5th International Conference on Foam Processing & Technology (FOAMS TopCon 2006), Chicago, Ill.. Non disponible
Billotte, C., Carreau, P., & Heuzey, M.-C. (2006). Rheological characterization of a solder paste for surface mount applications. Rheologica Acta, 45(4), 374-386. Lien externe
Mary, B., Dubois, C., Carreau, P., & Brousseau, P. (2006). Rheological properties of suspensions of polyethylene-coated aluminum nanoparticles. Rheologica Acta, 45(5), 561-573. Lien externe
Guillaud, S., Heuzey, M.-C., Carreau, P., & Polverari, M. (avril 2023). Rheology of Hydrophobically Modified Polyelectrolytes [Communication écrite]. 3rd Annual European Rheology Conference, Crete, Grèce. Non disponible
Cho, J. Y., Heuzey, M.-C., Begin, A., & Carreau, P. (2006). Viscoelastic Properties of Chitosan Solutions: Effect of Concentration and Ionic Strength. Journal of Food Engineering, 74(4), 500-515. Lien externe
Lertwimolnun, W., Vergnes, B., Ausias, G., & Carreau, P. (octobre 2005). Caractéristique rhéologique de nanocomposites polypropylène/argile en régime transitoire [Communication écrite]. 40e Colloque annuel du Groupe français de rhéologie, Nice, France (5 pages). Lien externe
Ascanio, G., Carreau, P., Reglat, O., & Tanguy, P. A. (2005). Extensional Rheology of Coating Suspensions in Relation With Misting in Film Coaters. Nordic Pulp & Paper Research Journal, 20(1), 48-53. Lien externe
Dufaure, N., Carreau, P., Heuzey, M.-C., & Michel, A. (2005). Phase Inversion in Immiscible Blends of Pe and Reactive Eva. Journal of Polymer Engineering, 25(3), 187-216. Lien externe
Cho, J., Heuzey, M.-C., Begin, A., & Carreau, P. (2005). Physical gelation of chitosan in the presence of β-glycerophosphate: The effect of temperature. Biomacromolecules, 6(6), 3267-3275. Lien externe
Fang, Y., Carreau, P., Lafleur, P., & Ymmel, S. (2005). Properties of MLLDPE/LDPE blends in film blowing. Polymer Engineering and Science, 45(3), 343-353. Lien externe
Ferretti, A., Carreau, P., & Gerard, P. (2005). Rheological and mechanical properties of PEO/block copolymer blends. Polymer Engineering and Science, 45(10), 1385-1394. Lien externe
Thomasset, J., Carreau, P., Sanschagrin, B., & Ausias, G. (2005). Rheological properties of long glass fiber filled polypropylene. Journal of Non-Newtonian Fluid Mechanics, 125(1), 25-34. Lien externe
Cho, J., Heuzey, M.-C., Bégin, A., & Carreau, P. (mai 2023). Rheology of heat-induced gelation of chitosan solutions [Communication écrite]. Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2005), Boston. Lien externe
Mobuchon, C., Carreau, P., Heuzey, M.-C., Sepehr, M., & Ausias, G. (2005). Shear and extensional properties of short glass fiber reinforced polypropylene. Polymer Composites, 26(3), 247-264. Lien externe
Sadeghi, F., Ajji, A., & Carreau, P. (2005). Study of polypropylene morphology obtained from blown and cast film processes: Initial morphology requirements for making porous membrane by stretching. Journal of Plastic Film & Sheeting, 21(3), 199-216. Lien externe
Sadeghi, F., Ajji, A., & Carreau, P. (mai 2023). Study of polyrolylene morphology to obtain porous membranes by stretching [Communication écrite]. Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2005), Boston. Lien externe
Fang, Y., Carreau, P., & Lafleur, P. (2005). Thermal and rheological properties of MLLDPE/LDPE blends. Polymer Engineering and Science, 45(9), 1254-1264. Lien externe
El-Sadi, H., Carreau, P., & Esmail, N. (2004). Changes in the Rheological and Colloidal Properties of Paper Coating Liquids With Paper-Yellowing Inhibition Additives. Journal of Colloid and Interface Science, 271(2), 496-503. Lien externe
Sepehr, M., Carreau, P., Grmela, M., Ausias, G., & Lafleur, P. (2004). Comparison of Rheological Properties of Fiber Suspensions With Model Predictions. Journal of Polymer Engineering, 24(6), 579-610. Lien externe
Sepehr, M., Ausias, G., & Carreau, P. (2004). Comportement rhéologique dans des écoulements transitoires en cisaillement simple des polymères fortement chargés en fibres courtes : mécanismes et déformations dans les matériaux multi-constituants. Mécanique & Industries, 5(4), 419-428. Lien externe
Kim, S., Fang, Y., Lafleur, P., & Carreau, P. (2004). Dynamics and criteria for bubble instabilities in a single layer film blowing extrusion. Polymer Engineering and Science, 44(2), 283-302. Lien externe
Arzate, A., Ascanio, G., Carreau, P., & Tanguy, P. A. (2004). Extensional viscosity of coating colors and its relation with jet coating performance. Applied Rheology, 14(5), 240-250. Disponible
Ascanio, G., Carreau, P., Brito-de la Fuente, E., & Tanguy, P. A. (2004). Forward deformable roll coating at high speed with Newtonian fluids. Chemical Engineering Research & Design, 82(3), 390-397. Lien externe
Chen, X., Heuzey, M.-C., & Carreau, P. (2004). Rheological properties of injection molded LDPE and mPE foams. Polymer Engineering and Science, 44(11), 2158-2164. Lien externe
Sepehr, M., Ausias, G., & Carreau, P. (2004). Rheological properties of short fiber filled polypropylene in transient shear flow. Journal of Non-Newtonian Fluid Mechanics, 123(1), 19-32. Lien externe
Sepehr, M., Carreau, P., Moan, M., & Ausias, G. (2004). Rheological Properties of Short Fiber Model Suspensions. Journal of Rheology, 48(5), 1023-1048. Lien externe
Chen, X., Heuzey, M.-C., & Carreau, P. (janvier 2004). Rheological study of injection molded polyolefin foams [Communication écrite]. Society of plastics engineers ANTEC, Chicago, Il.. Lien externe
Banik, I., Carreau, P., & Schreiber, H. P. (2004). Temperature-Dependent Polymer-Polymer Interactions in Polystyrene-Polyethylene Blends. Journal of Polymer Science. Part B: Polymer Physics, 42(13), 2545-2557. Lien externe
Hashemi, S. A., Ait-Kadi, A., & Carreau, P. (2003). Effects of Surface Treatment of Kraft Wood Fibers by Polymerization Compounding on Properties of Fiber Composites. Journal of Polymer Engineering, 23(4), 281-298. Lien externe
Arzate, A., Ascanio, G., Carreau, P., & Tanguy, P. A. (octobre 2003). Extensional rheology of paper coating colors at high strain rate [Communication écrite]. 75th annual meeting of the Society of Rheology, Pittsburgh, Pennsylvania, USA. Non disponible
Fang, Y. L., Carreau, P., & Lafleur, P. (2003). Rheological Effects of Polyethylenes in Film Blowing. Polymer Engineering and Science, 43(7), 1391-1406. Lien externe
Savarmand, S., Carreau, P., Bertrand, F., Vidal, J. E., & Moan, M. (2003). Rheological properties of concentrated aqueous silica suspensions : effects of pH and ions content. (Rapport technique n° Report 837). Non disponible
Savarmand, S., Carreau, P., Bertrand, F., Vidal, D., & Moan, M. (2003). Rheological properties of concentrated aqueous silica suspensions: effects of pH and ions content. Journal of Rheology, 47(5), 1133-1149. Lien externe
Craciun, L., Carreau, P., Heuzey, M.-C., van de Ven, T., & Moan, M. (2003). Rheological properties of concentrated latex suspensions of poly(styrene-butadiene). Rheologica Acta, 42(5), 410-420. Lien externe
Lessard, D. G., Ousalem, M., Zhu, X. X., Eisenberg, A., & Carreau, P. (2003). Study of the Phase Transition of Poly(N,N-Diethylacrylamide) in Water by Rheology and Dynamic Light Scattering. Journal of Polymer Science. Part B: Polymer Physics, 41(14), 1627-1637. Lien externe
Kay, D., Carreau, P., Lafleur, P., Robert, L., & Vergnes, B. (2003). A Study of the Stick-Slip Phenomenon in Single-Screw Extrusion of Linear Polyethylene. Polymer Engineering and Science, 43(1), 78-90. Lien externe
Laffargue, J., Parent, L., Lafleur, P., Carreau, P., Demay, Y., & Agassant, J. F. (2002). Investigation of Bubble Instabilities in Film Blowing Process. International Polymer Processing, 17(4), 347-353. Lien externe
Brito-De La Fuente, E., Bertrand, F., Carreau, P., & Tanguy, P. A. (2002). Mixing of viscoelastic fluids: A new strategy to elucidate the influence of elasticity on power consumption. Dans Engineering and Food for the 21st Century (347-359). Lien externe
Marguerat, F., Carreau, P., & Michel, A. (2002). Morphology and Rheological Properties of Polypropylene/Reactive Elastomer Blends. Polymer Engineering and Science, 42(10), 1941-1955. Lien externe
Ascanio, G., Carreau, P., Brito, E., & Tanguy, P. A. (2002). Orifice flowmeter for measuring extensional rheological properties. Canadian Journal of Chemical Engineering, 80(6), 1189-1196. Lien externe
Page, A., Carreau, P., Moan, M., & Heuzey, M.-C. (2002). Rheological Behavior of Coating Colors: Influence of Thickener. Canadian Journal of Chemical Engineering, 80(6), 1181-1188. Lien externe
Carreau, P., Cotton, F., & Citerne, G. P. Rheological Properties of Concentrated Suspensions: Applications to Foodstuffs [Communication écrite]. Engineering and Food for the 21st Century. Lien externe
Ascanio, G., Brito-Bazan, M., Brito-De La Fuente, E., Carreau, P., & Tanguy, P. A. (2002). Unconventional Configuration Studies to Improve Mixing Times in Stirred Tanks. Canadian Journal of Chemical Engineering, 80(4), 558-565. Lien externe
Li, J., Tanguy, P. A., Carreau, P., & Moan, M. (2001). Effect of Thickener Structure on Paper-Coating Color Properties. Colloid and Polymer Science, 279(9), 865-871. Lien externe
Savarmand, S., Carreau, P., Bertrand, F., & Vidal, D. (octobre 2001). Propriétés rhéologiques de suspensions de particules de silice [Communication écrite]. 36e Colloque annuel du Groupe français de rhéologie, Marne-la-vallée, France. Non disponible
Citerne, G. P., Carreau, P., & Moan, M. (2001). Rheological Properties of Peanut Butter. Rheologica Acta, 40(1), 86-96. Lien externe
Savarmand, S., Carreau, P., Bertrand, F., & Vidal, D. (octobre 2001). Rheological properties of silica suspensions [Communication écrite]. 73rd Annual Meeting of the Society of Rheology, Bethesda, Maryland, USA. Non disponible
Sepehr, M., Carreau, P., & Ausias, G. (janvier 2001). Viscosity overshoot for short fiber filled polymer in shear flow [Communication écrite]. 17th Annual Meeting of the Polymer Processing Society, Montréal, Québec. Non disponible
Della Valle, D., Tanguy, P. A., & Carreau, P. (2000). Characterization of the Extensional Properties of Complex Fluids Using an Orifice Flowmeter. Journal of Non-Newtonian Fluid Mechanics, 94(1), 1-13. Lien externe
Martin, P., Carreau, P., Favis, B. D., & Jérôme, R. (2000). Investigating the morphology/rheology inter-relationships in immiscible polymer blends. Journal of Rheology, 44(3), 568-583. Lien externe
Chapleau, N., Favis, B. D., & Carreau, P. (2000). Measuring the Interfacial Tension of Polyamide/Polyethylene and Polycarbonate/Polypropylene Blends: Effect of Temperature. Polymer, 41(17), 6695-6698. Lien externe
Ausias, G., Jego, M., Sepehr, M., Carreau, P., Fraissard, B., & Moan, M. (janvier 2000). Morphology and rheological properties of polyolefine/elastomers blends [Communication écrite]. 13th Congress on Rheology, Cambridge, UK. Non disponible
Marguerat, F., Carreau, P., Gori, S., & Michel, A. (janvier 2000). Morphology and rheological properties of reactive polyolefine/elastomer blends [Communication écrite]. 13th Congress on Rheology, Cambridge UK. Non disponible
Carreau, P. (janvier 2000). Rheological properties of immiscible polymer blends [Communication écrite]. Sixteen annual meeting of the polymer processing society, Shanghai, China. Non disponible
Tovar, G., Carreau, P., & Schreiber, H. P. (2000). Transesterification, Morphology and Some Mechanical Properties of Thermotropic Liquid Crystal Polymers/Polycarbonate Blends. Colloids and Surfaces. A, Physicochemical and Engineering Aspects, 161(1), 213-223. Lien externe
Mekhilef, N., Carreau, P., Favis, B. D., Martin, P., & Ouhlal, A. (2000). Viscoelastic Properties and Interfacial Tension of Polystyrene- Polyethylene Blends. Journal of Polymer Science. Part B: Polymer Physics, 38(10), 1359-1368. Lien externe
Carreau, P., Bousmina, M., & Bonniot, F. (2000). The Viscoelastic Properties of Polymer-Modified Asphalts. Canadian Journal of Chemical Engineering, 78(3), 495-503. Lien externe
Lacroix, C., Grmela, M., & Carreau, P. (1999). Morphological Evolution of Immiscible Polymer Blends in Simple Shear and Elongational Flows. Journal of Non-Newtonian Fluid Mechanics, 86(1-2), 37-59. Lien externe
Yziquel, F., Carreau, P., & Tanguy, P. A. (1999). Non-Linear Viscoelastic Behavior of Fumed Silica Suspensions. Rheologica Acta, 38(1), 14-25. Lien externe
Yziquel, F., Moan, M., Carreau, P., & Tanguy, P. A. (1999). Nonlinear Viscoelastic Behavior of Paper Coating Colors. Nordic Pulp & Paper Research Journal, 14(1), 37-47. Lien externe
Bertrand, F., Tanguy, P. A., De La Fuente, E. B., & Carreau, P. (1999). Numerical Modeling of the Mixing Flow of Second-Order Fluids With Helical Ribbon Impellers. Computer Methods in Applied Mechanics and Engineering, 180(3-4), 267-280. Lien externe
Yziquel, F., Carreau, P., Moan, M., & Tanguy, P. A. (1999). Rheological Modeling of Concentrated Colloidal Suspensions. Journal of Non-Newtonian Fluid Mechanics, 86(1-2), 133-155. Lien externe
Tanguy, P. A., Bertrand, F., Brito de la Fuente, E., & Carreau, P. (novembre 1998). The effect of elasticity on the mixing of boger fluids with helical ribbons [Communication écrite]. 1998 AIChE Annual Meeting, Miami, CA, USA. Non disponible
Lafleur, P., Carreau, P., & Ghaneh-Fard, A. (septembre 1998). In-line birefringence measurements on film blowing of polyolefins [Communication écrite]. International Symposium on Orientation of Polymers, Boucherville, Qc.. Non disponible
Mighri, F., Carreau, P., & Ajji, A. (1998). Influence of Elastic Properties on Drop Deformation and Breakup in Shear Flow. Journal of Rheology, 42(6), 1477-1490. Lien externe
Chapleau, N., Favis, B. D., & Carreau, P. (1998). Measuring the Interfacial Tension of Polymers in the Presence of an Interfacial Modifier: Migrating the Modifier to the Interface. Journal of polymer science. Part B, Polymer physics, 36(11), 1947-1958. Lien externe
Carreau, P., Lacroix, C., & Grmela, M. (octobre 1998). Prédiction de l'évolution de la morphologie de mélanges de polymères immiscibles en cisaillement simple et écoulement élongationnel [Communication écrite]. 33e Colloque annuel du Groupe français de rhéologie & 8. Reunion anual del Grupo especializado de reologia de las Reales sociedades de fisica y quimica, Biarritz, France. Publié dans Cahiers de rhéologie, 16(1). Non disponible
Della Valle, G., Buleon, A., Carreau, P., Lavoie, P. A., & Vergnes, B. (1998). Relationship Between Structure and Viscoelastic Behavior of Plasticized Starch. Journal of Rheology, 42(3), 507-525. Lien externe
Lacroix, C., Grmela, M., & Carreau, P. (1998). Relationships Between Rheology and Morphology for Immiscible Molten Blends of Polypropylene and Ethylene Copolymers Under Shear Flow. Journal of Rheology, 42(1), 41-62. Lien externe
Lacroix, C., Grmela, M., & Carreau, P. (1998). Response to "Comment on 'relationships Between Rheology and Morphology for Immiscible Molten Blends of Polypropylene and Ethylene Copolymers Under Shear Flow'" [J Rheol 42,1273- 1276(1998)]. Journal of Rheology, 42(5), 1277-1279. Lien externe
Carreau, P., Ghaneh-Ford, A., & Lafleur, P. (avril 1998). Rheological effects in film blowing [Communication écrite]. Annual Technical Conference of the Society of Plastics Engineers (ANTEC 1998). Lien externe
Mighri, F., Ajji, A., & Carreau, P. (1997). Influence of elastic properties on drop deformation in elongational flow. Journal of Rheology, 41(5), 1183-1201. Lien externe
Lacroix, C., Aressy, M., & Carreau, P. (1997). Linear viscoelastic behavior of molten polymer blends: a comparative study of the palierne and lee and park models. Rheologica Acta, 36(4), 416-428. Lien externe
Thomasset, J., Grmela, M., & Carreau, P. (1997). Microstructure and rheology of polymer melts reinforced by long glass fibres: Direct simulations. Journal of Non-Newtonian Fluid Mechanics, 73(3), 195-203. Lien externe
Mekhilef, N., Favis, B. D., & Carreau, P. (1997). Morphological stability, interfacial tension, and dual-phase continuity in polystyrene-polyethylene blends. Journal of polymer science. Part B, Polymer physics, 35(2), 293-308. Lien externe
Legros, A., Carreau, P., Favis, B. D., & Michel, A. (1997). Morphology modification by interfacial chemical reaction in a polyester/ethylene vinyl acetate/polyethylene blend. Polymer, 38(20), 5085-5089. Lien externe
Chapleau, N., Favis, B. D., & Carreau, P. (avril 1997). Morphology of polyamide/polyethylene blends under extensional flow: Effect of compatibilization [Communication écrite]. 55th Annual Technical Conference (ANTEC 1997), Toronto, Can. Lien externe
Della Valle, D., Tanguy, P. A., Carreau, P., & Lavoie, P. A. (octobre 1997). A new rheometer for the extensional properties of viscoelastic liquids [Communication écrite]. 32e Colloque Annuel du Groupe Français de Rhéologie, Nantes, France. Publié dans Cahiers de rhéologie, 15(4). Non disponible
Ghanehfard, A., Carreau, P., & Lafleur, P. (1997). On-line birefringence measurement in film blowing of a linear low density polyethylene. International Polymer Processing, 12(2), 136-146. Lien externe
Della Valle, G., Buleon, A., Carreau, P., Lavoie, P., & Vergnes, B. (octobre 1997). Relations entre structure et comportement viscoélastique d'amidons plastifiés [Communication écrite]. 32e Colloque Annuel du Groupe Français de Rhéologie, Nantes, France. Publié dans Cahiers de rhéologie, 15(4). Non disponible
Lacroix, C., Martin, P., Grmela, M., & Carreau, P. (octobre 1997). Rheology and morphology of immiscible polymer blends in simple shear flow [Communication écrite]. International Symposium on Polymer Blends, Alloys and Filled Systems (POLYBLENDS 1997), Boucherville, Can. Non disponible
Ghosh, T., Lavoie, P. A., & Carreau, P. Rheology of coating colors and their runnability on a cylindrical laboratory coater [Communication écrite]. TAPPI 1996 Coating Conference USA. Publié dans Tappi journal, 80(11). Lien externe
Lavoie, P. A., Carreau, P., & Ghosh, T. (1997). Rheology of suspensions: the flow behaviour of coating colours. Journal of Pulp and Paper Science, 23(11), J543-J547. Non disponible
Della Valle, D., Tanguy, P. A., Carreau, P., Lavoie, P. A., Parent, L., & Bertrand, F. (janvier 1997). A specific rheometer for extensional properties of coating colours [Communication écrite]. 1997 CPPA Annual Meeting, Montréal, Qc, Canada. Non disponible
Ghaneh-Fard, A., Carreau, P., & Lafleur, P. (1997). Study of kinematics and dynamics of film blowing of different polyethylenes. Polymer Engineering and Science, 37(7), 1148-1163. Lien externe
Tovar, G., Carreau, P., & Schreiber, H. P. (1997). Surface and interaction characteristics of liquid crystal polymers and their miscibility with thermoplastic hosts. Journal of Adhesion, 63(1-3), 215-230. Lien externe
Tanguy, P. A., Bertrand, F., & Carreau, P. (octobre 1997). Three-dimensional modelling of boger fluid flows in helical ribbon mixers [Communication écrite]. 69th Annual Meeting of the Society of Rheology, Colombus, Ohio. USA. Lien externe
Mighri, F., Carreau, P., & Ajji, A. (octobre 1997). Visualization of the deformation and breakup of elastic drops in elastic matrices in shear flow [Communication écrite]. International Symposium on Polymer Blends, Alloys and Filled Systems (POLYBLENDS 1997), Boucherville, Can. Non disponible
Ghaneh-Fard, A., Carreau, P., & Lafleur, P. (mai 1995). Application of birefringence to film blowing [Communication écrite]. 53rd Annual Technical Conference, Boston, MA. Publié dans Journal of Plastic Film & Sheeting, 12(1). Non disponible
Huneault, M. A., Lafleur, P., & Carreau, P. (1996). Evaluation of the fan technique for profile die design. International Polymer Processing, 11(1), 50-57. Lien externe
Mighri, F., Ajji, A., & Carreau, P. (1996). Influence of rheological properties on drop deformation in elongational flow. Journal of Engineering and Applied Science, 2, 2601-2605. Non disponible
Lacroix, C., Bousmina, M., Carreau, P., Favis, B. D., & Michel, A. (1996). Properties of PETG/EVA blends: 1. Viscoelastic, morphological and interfacial properties. Polymer, 37(14), 2939-2947. Lien externe
Lacroix, C., Bousmina, M., Carreau, P., Llauro, M. F., Petiaud, R., & Michel, A. (1996). Properties of PETG/EVA blends: 2. Study of reactive compatibilization by n.m.r. spectroscopy and linear viscoelastic properties. Polymer, 37(14), 2949-2956. Lien externe
Carreau, P., Lavoie, P.-A., & Bagassi, M. (1996). Rheological properties of filled polymers. Macromolecular Symposia, 108(1), 111-126. Lien externe
Lavoie, P.-A., Ghosh, T., & Carreau, P. (juin 1996). Rheology of coating colors: A comprehensive approach [Communication écrite]. International Paper and Coating Chemistry Symposium, Ottawa, Can. Non disponible
Carreau, P., & Lavoie, P.-A. (février 1996). Rheology of suspensions: the use of model fluids to simulate the flow behaviour of coating colours [Communication écrite]. 82nd Annual Meeting of Technical Section Canadian Pulp and Paper Association, Montréal, Québec. Non disponible
Ghaneh-Fard, A., Carreau, P., & Lafleur, P. (1996). Study of instabilities in film blowing. AICHE Journal, 42(5), 1388-1396. Lien externe
Ghaneh-Fard, A., Carreau, P., & Lafleur, P. (mai 1996). Study of kinematics and dynamics of film blowing of a linear low density polyethylene [Communication écrite]. 54th Annual Technical Conference, Indianapolis, IN, USA. Non disponible
Mekhilef, N., Carreau, P., & Favis, B. D. (janvier 1996). Viscoelastic properties of polystyrene-polyethylene blends: interfacial tension measurements using the breaking thread method and predictions with an emulsion model [Communication écrite]. 12th Annual Meeting of the Polymer Processing Society, Sorrento, Italy. Non disponible
Dlugogorski, B. Z., Grmela, M., & Carreau, P. (1995). Direct modeling of flow of FENE fluids. Rheologica Acta, 34(4), 384-396. Lien externe
Chapleau, N., Favis, B. D., & Carreau, P. (1995). Evaluation of the interfacial tension using the breaking thread method: Effect of temperature and of interfacial modifier. Polymeric Materials Science and Engineering, 73, 18-19. Non disponible
Chapleau, N., Favis, B. D., & Carreau, P. (1995). Evaluation of the interfacial-tension using the breaking thread method - effect of temperature and ot interfacial modifier. Abstracts of Papers of the American Chemical Society, 210, 10-10. Non disponible
Mighri, F., Ajji, A., & Carreau, P. Influence of rheological properties on drop deformation in elongational flow [Communication écrite]. SPE Regional Technical Conference on Polymer Alloys and Blends (Polyblends 1995). Non disponible
Mekhilef, N., Favis, B. D., & Carreau, P. (mai 1995). Morphological stability of polystyrene polyethylene blends [Communication écrite]. 53rd Annual Technical Conference, Boston, MA, USA. Non disponible
Carreau, P., Bonniot, F., & Bousmina, M. (octobre 1995). Polymer modified asphalts [Communication écrite]. SPE Regional Technical Conference on Polymer Alloys and Blends (Polyblends 1995), Boucherville, Can. Non disponible
Ghosh, T., Grmela, M., & Carreau, P. (1995). Rheology of short fiber filled thermoplastics. Polymer Composites, 16(2), 144-153. Lien externe
Tiu, C., Moussa, T., & Carreau, P. (1995). Steady and dynamic shear properties of non-aqueous drag-reducing polymer solutions. Rheologica Acta, 34(6), 586-600. Lien externe
Cheng, J., & Carreau, P. (1994). Aerated mixing of viscoelastic fluids with helical ribbon impellers. Chemical Engineering Science, 49(12), 1965-1972. Lien externe
Wang, X., Carreau, P., & Lafleur, P. (mai 1994). Entrance pressure loss and extrudate roughness during hdpe extrusion [Communication écrite]. Annual Technical Conference of the Society of Plastics Engineers (ANTEC 1994), San Francisco, Ca.. Non disponible
Wang, X., Clément, B., Carreau, P., & Lafleur, P. (1994). Extrudate roughness of HDPE and LLDPE : Determination of key parameters using screening design. Polymer Engineering and Science, 34(13), 1047-1055. Lien externe
Carreau, P., Paris, J., & Guérin, P. (1994). Heat transfer to newtonian and non-newtonian liquids in a screw agitator and draft coil system. Canadian Journal of Chemical Engineering, 72(6), 966-974. Lien externe
Cheng, J., & Carreau, P. (1994). Mixing in the transition flow regime with helical ribbon agitators. Canadian Journal of Chemical Engineering, 72(3), 418-430. Lien externe
Bouchard, C. R., Carreau, P., Matsuura, T., & Sourirajan, S. (1994). Modeling of ultrafiltration : predictions of concentration polarization effects. Journal of Membrane Science, 97, 215-229. Lien externe
Legros, A., Carreau, P., Favis, B. D., & Michel, A. (1994). Reactive compatibilization of polyester/vinyl acetate copolymer blends: rheological, morphological and mechanical properties. Polymer, 35(4), 758-764. Lien externe
Doyon, J.-F., Lafleur, P., Carreau, P., & Vergnes, B. (mai 1994). Recycling of polyolefins: processability and degradation [Communication écrite]. 52nd Annual Technical Conference ANTEC 94, San Francisco, CA, USA. Non disponible
Carreau, P., Bousmina, M., & Ajji, A. (décembre 1993). Rheological properties of blends: Facts and challenges [Communication écrite]. 3rd Pacific Polymer Conference, Gold Coast, Queensland, Aust. Non disponible
Ortiz, M., De Kee, D., & Carreau, P. (1994). Rheology of concentrated poly(ethylene oxide) solutions. Journal of Rheology, 38(3), 519-539. Lien externe
Dlugogorski, B. Z., Grmela, M., Carreau, P., & Lebon, G. (1994). Rheology of several hundred rigid bodies. Journal of Non-Newtonian Fluid Mechanics, 53, 25-64. Lien externe
Carreau, P., & Dekee, D. (1994). Special issue - selected papers presented at the 3rd conference on, recent developments in structural continua, montreal, quebec, canada, may 26-28, 1993 - preface. Journal of Non-Newtonian Fluid Mechanics, 53. Non disponible
Brito-de-la-Fuente, E., Carreau, P., Cheng, J., Bertrand, F., Tanguy, P. A., & Choplin, L. (juin 1993). Macromixing of rheologically complex fluids with helical impellers [Communication écrite]. 14th biennial Conference on Mixing (Mixing XVIII), Santa Barbara, CA, USA. Non disponible
Carreau, P., & Grmela, M. (1991). Conformation tensor rheological models. Dans Rheological modelling : thermodynamical and statistical approaches (Vol. 381, 126-157). Lien externe
Malik, T. M., Carreau, P., Grmela, M., & Dufresne, A. (1988). Mechanical and rheological properties of carbon black filled polyethylene. Polymer Composites, 9(6), 412-418. Lien externe
Grmela, M., & Carreau, P. (1983). Mesoscopic kinetic theory of polymer melts. The Journal of Chemical Physics, 78(8), 5164-5174. Lien externe
Carreau, P., Charest, G., & Corneille, J. L. (1966). Heat transfer to agitated non-newtonian fluids. Canadian Journal of Chemical Engineering, 44(1), 3-8. Lien externe
