 | Monter d'un niveau |
Abadi, A. N., Hemmati, F., & Garmabi, H. (2018). Validation of rheological responses for morphological evaluation of incompatible polyamide 12/thermoplastic elastomer blends filled with nanoclay. Polymer Testing, 65, 78-89. Lien externe
Abdollahi Neisiani, M., Latifi, M., Chaouki, J., & Chilian, C. (2018). Novel approach in k0-NAA for highly concentrated REE Samples. Talanta, 180, 403-409. Lien externe
Abriat, C., Daigle, F., Virgilio, N., & Heuzey, M.-C. (avril 2018). Interfacial Rheology of Bacterial Biofilms [Présentation]. Dans Annual European Rheology Conference (AERC 2018), Sorrento, Italy. Non disponible
Abriat, C., Daigle, F., Virgilio, N., & Heuzey, M.-C. (octobre 2018). Real-time characterization of microbiological and mechanical properties of bacillus licheniformis and pseudomonas fluorescens dual-species biofilms [Affiche]. 8th ASM Conference on Biofilms, Washington, D.C.. Non disponible
Abriat, C., Heuzey, M.-C., Virgilio, N., & Daigle, F. (octobre 2018). Characterization of dual-species biofilm of bacillus licheniformis and pseudomonas fluorescens at the air-liquid interface [Présentation]. Dans 90th Annual Meeting of the Society of Rheology, Houston, Texas. Non disponible
Abriat, C., Heuzey, M.-C., Virgilio, N., & Daigle, F. (juin 2018). Rheology of dual-species biofilms at the air-liquid interface [Affiche]. CREPEC Annual Student Colloquium, Montréal, Québec. Non disponible
Absar, S. M., Boulay, A.-M., Campa, M. F., Preston, B. L., & Taylor, A. (2018). The tradeoff between water and carbon footprints of Barnett Shale gas. Journal of Cleaner Production, 197(1), 47-56. Lien externe
Adrar, S., Habi, A., Ajji, A., & Grohens, Y. (2018). Synergistic effects in epoxy functionalized graphene and modified organo-montmorillonite PLA/PBAT blends. Applied Clay Science, 157, 65-75. Lien externe
Ajao, O., Marinova, M., Savadogo, O., & Paris, J. (2018). Hemicellulose based integrated forest biorefineries: Implementation strategies. Industrial Crops and Products, 126, 250-260. Lien externe
Al-Haiek, A. (2018). Scaling the Production of Solid-Stabilized Emulsions [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Alameh, M., Lavertu, M., Tran-Khanh, N., Chang, C.-Y., Lesage, F., Bail, M., Darras, V., Chevrier, A., & Buschmann, M. D. (2018). siRNA delivery with chitosan: influence of chitosan molecular weight, degree of deacetylation, and amine to phosphate ratio on in vitro silencing efficiency, hemocompatibility, biodistribution, and in vivo efficacy. Biomacromolecules, 19(1), 112-131. Lien externe
Ardila, N., Ajji, Z., Heuzey, M.-C., & Ajji, A. (2018). Chitosan electrospraying: Mapping of process stability and micro and nanoparticle formation. Journal of Aerosol Science, 126, 85-98. Lien externe
Arkoun, M., Ardila, N., Heuzey, M.-C., & Ajji, A. (2018). Chitosan-based structures/coatings with antibacterial properties. Dans Handbook of antimicrobial coatings (p. 357-389). Lien externe
Arkoun, M., Daigle, F., Holley, R. A., Heuzey, M.-C., & Ajji, A. (2018). Chitosan-based nanofibers as bioactive meat packaging materials. Packaging Technology and Science, 31(4), 185-195. Lien externe
Aubé, M., Robelin, C., & Chartrand, P. (mai 2018). Thermodynamic evaluation and optimization of the H2O-HNO3 and H2O-HCl systems [Présentation]. Dans CALPHAD XLVII, Querétaro, Mexico. Non disponible
Audet, E., Mighri, F., Rodrigue, D., & Ajji, A. (2018). Cellular morphology optimization of polypropylene/CaCO₃ composite films designed for piezoelectric applications. Cellular Polymers, 37(3), 103-119. Lien externe
Aziz, L., Deschênes, L., Karim, R.-A., Patouillard, L., & Bulle, C. (2018). Including metal atmospheric fate and speciation in soils for terrestrial ecotoxicity in life cycle impact assessment. International Journal of Life Cycle Assessment, 23(11), 2178-2188. Lien externe
Bagheriasl, D., Carreau, P., Riedl, B., & Dubois, C. (2018). Enhanced properties of polylactide by incorporating cellulose nanocrystals. Polymer Composites, 39(8), 2685-2694. Lien externe
Bautista-Del-Ángel, J. E., Morales-Cepeda, A. B., Lozano-Ramírez, T., Sanchez, S., Karami, S., & Lafleur, P. (2018). Enhancement of crystallinity and toughness of poly (L-lactic acid) influenced by Ag nanoparticles processed by twin screw extruder. Polymer Composites, 39(7), 2368-2376. Lien externe
Belot, I., Vidal, D., Greiner, R., Votsmeier, M., Van Setten, B., Hayes, R. E., & Bertrand, F. (octobre 2018). On the impact of washcoat distribution on the performance of three-way catalyst filters [Communication écrite]. 11th International Congress on Catalysis and Automotive Pollution Control, Brussels, Belgium. Non disponible
Belot, I., Vidal, D., Hayes, R. E., Van Setten, B., Voitsmeier, M., & Bertrand, F. (janvier 2018). Optimizing the performance of engine exhaust after-treatment system using numerical simulation [Communication écrite]. 2018 New Frontiers in Multiphase CFD for the 21st Century Mix, Oaxaca, Mexico. Non disponible
Ben Cheikh, S. (2018). Conception de la chaîne logistique des bioraffineries forestières intégrées et vertes [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Benchimol, A. A., Dubois, C., Bertrand, F., & Vidal, D. (octobre 2018). Implementation of a viscoelastic model to generate a shear stress test using the DEVSS\SUPG method [Communication écrite]. 2018 COSMOL Conference, Boston, MA, USA. Lien externe
Benzennou, S. (2018). Amélioration de la qualité des huiles issues de la pyrolyse-microondes des déchets ménagers [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Benzennou, S., Laviolette, J.-P., & Chaouki, J. (2018). Kinetic Study of Microwave Pyrolysis of Paper Cups and Comparison with Calcium Oxide Catalyzed Reaction. AICHE Journal, 65(2), 684-690. Lien externe
Bertrand, F. (septembre 2018). Combined use of simulation and experimentation for better understanding solid-liquid mixing [Communication écrite]. 16th European Conference on Mixing, Toulouse, France. Non disponible
Bertrand, O., Blais, B., Bertrand, F., & Fradette, L. (2018). Complementary methods for the determination of the just-suspended speed and suspension state in a viscous solid-liquid mixing system. Chemical Engineering Research and Design, 136, 32-40. Lien externe
Beuguel, Q., Bagheriasl, D., Bruel, C., Tavares, J. R., Carreau, P., & Heuzey, M.-C. (2018). Comportement rhéologique à l'état fondu de nanocomposites à base de nanocristaux de cellulose (CNCs). Rhéologie (34), 10-16. Disponible
Beuguel, Q., Tavares, J. R., Carreau, P., & Heuzey, M.-C. (2018). Rheological behavior of cellulose nanocrystal suspensions in polyethylene glycol. Journal of Rheology, 62(2), 607-618. Disponible
Beuguel, Q., Tavares, J. R., Carreau, P., & Heuzey, M.-C. (2018). Ultrasonication of spray- and freeze-dried cellulose nanocrystals in water. Journal of Colloid and Interface Science, 516, 23-33. Disponible
Blais, B., & Ilinca, F. (2018). Development and validation of a stabilized immersed boundary CFD model for freezing and melting with natural convection. Computers & Fluids, 172, 564-581. Disponible
Boutrouka, R., Tabatabaei, S. H., & Ajji, A. (2018). Enhancement of heat seal properties of polypropylene films by elastomer incorporation. International Polymer Processing, 33(3), 322-326. Lien externe
Bruel, C., Beuguel, Q., Tavares, J. R., Carreau, P., & Heuzey, M.-C. (2018). The apparent structural hydrophobicity of cellulose nanocrystals. J-FOR The Journal of Science and Technology for Forest Products and Processes, 7(4), 13-23. Disponible
Brunet, C. M., Savadogo, O., Baptiste, P., & Bouchard, M. A. (2018). Shedding some light on photovoltaic solar energy in Africa – A literature review. Renewable and Sustainable Energy Reviews, 96, 325-342. Disponible
Buschmann, M. D., Lavertu, M., Nelea, M., Darras, V., Alameh, M. G., Chevrier, A., Tran-Khanh, N., Naeini Tavakoli, A., & Veilleux, D. (2018). Coated chitosan-based polyplex for delivery of nucleic acids. (Demande de brevet no US20180028458). Lien externe
Caldeira, C., Quinteiro, P., Castanheira, E., Boulay, A.-M., Dias, A. C., Arroja, L., & Freire, F. (2018). Water footprint profile of crop-based vegetable oils and waste cooking oil: Comparing two water scarcity footprint methods. Journal of Cleaner Production, 195, 1190-1202. Lien externe
Carnevali, D. (2018). Catalytic Design for Fructose Conversion to Speciality Chemicals [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Carnevali, D., Guevremont, O., Rigamonti, M. G., Stucchi, M., Cavani, F., & Patience, G. S. (2018). Gas-phase fructose conversion to furfural in a microfluidized bed reactor. ACS Sustainable Chemistry and Engineering, 6(4), 5580-5587. Lien externe
Carnevali, D., Rigamonti, M. G., Tabanelli, T., Patience, G. S., & Cavani, F. (2018). Levulinic acid upgrade to succinic acid with hydrogen peroxide. Applied Catalysis A: General, 563, 98-104. Lien externe
Castejon, P., Habibi, K., Saffar, A., Ajji, A., Martinez, A. B., & Arencon, D. (2018). Polypropylene-based porous membranes: Influence of polymer composition, extrusion draw ratio and uniaxial strain. Polymers, 10(1). Disponible
Chambost, V., Janssen, M., & Stuart, P. R. (2018). Systematic assessment of triticale-based biorefinery strategies: investment decisions for sustainable biorefinery business models. Biofuels, Bioproducts and Biorefining, 12(S1), S9-S20. Lien externe
Chaouki, J., Ebrahimpour, O., & Dubois, C. (2018). Porous SiC ceramic and method for the fabrication thereof. (Brevet no US9919975). Lien externe
Chartrand, P., Gheribi, A. E., Wang, K., Ouzilleau, P., & Robelin, C. (juin 2018). Thermodynamic and physical-property models for the production of primary aluminum [Présentation]. Dans Canadian Materials Science Conference, Edmonton, Canada. Non disponible
Chevrier, A., Darras, V., Picard, G., Nelea, M., Veilleux, D., Lavertu, M., Hoemann, C. D., & Buschmann, M. D. (2018). Injectable chitosan-platelet-rich plasma (PRP) implants to promote tissue regeneration: In vitro properties, in vivo residence, degradation, cell recruitment and vascularization. Journal of Tissue Engineering and Regenerative Medicine, 12(1), 217-228. Lien externe
Chhin, D., Polcari, D., Bodart-Le Guen, C., Tomasello, G., Cicoira, F., & Schougaard, S. B. (octobre 2017). Diazonium-based anchoring of PEDOT on Pt/Ir electrodes via diazonium chemistry [Communication écrite]. Brain and Electrochemistry Symposium, National Harbor, Maryland. Publié dans Journal of The Electrochemical Society, 165(12). Disponible
Chimeni, D. Y., Dubois, C., & Rodrigue, D. (2018). Polymerization compounding of hemp fibers to improve the mechanical properties of linear medium density polyethylene composites. Polymer Composites, 39(8), 2860-2870. Lien externe
Chimeni, D. Y., Hirschberg, V., Dubois, C., & Rodrigue, D. (2018). Rheological behavior of composites made from linear medium-density polyethylene and hemp fibers treated by surface-initiated catalytic polymerization. Rheologica Acta, 57(6-7), 445-457. Lien externe
Cicoira, F. (août 2018). Flexible, Stretchable and Healable Electronics [Résumé]. International Flexible Electronics Technology Conference (IFETC 2018), Ottawa, ON (1 page). Lien externe
Clerc, F., Chambost, V., & Stuart, P. R. (octobre 2018). Revisiting Biorefinery Strategies: The Case of Large-Scale Production of Drop-In Biofuels [Communication écrite]. 8th Nordic Wood Biorefinery Conference, Helsinki, Finland. Lien externe
Cloutier, J.-N., Paris, J., Savadogo, O., Perrier, M., Labrecque, R., & Champagne, P. (2018). Electrolytic Processing of Kraft Black Liquor- Mass Transfer Investigation. ECS Meeting Abstracts, MA2018-01(20), 1271-1271. Lien externe
Darabi Mahboub, M. J. (2018). Keggin-Type Catalysts Partially Oxidize 2-Methyl-1,3- Propanediol to Methacrylic Acid in a Micro-Fluidized Bed Reactor [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Darabi Mahboub, M. J., Dubois, J.-L., Cavani, F., Rostamizadeh, M., & Patience, G. S. (2018). Catalysis for the synthesis of methacrylic acid and methyl methacrylate. Chemical Society Reviews, 47(20), 7703-7738. Lien externe
Darabi Mahboub, M. J., Wright, J., Boffito, D. C., Dubois, J.-L., & Patience, G. S. (2018). Cs, V, Cu Keggin-type catalysts partially oxidize 2-methyl-1,3-propanediol to methacrylic acid. Applied Catalysis A: General, 554, 105-116. Lien externe
Decterov, S. (2018). Thermodynamic database for multicomponent oxide systems. Chimica Techno Acta, 5(1), 16-48. Disponible
Demol, R. (2018). Développement d'un modèle compartimental pour le transfert de matière dans les colonnes à bulles [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Depres-Tremblay, G., Chevrier, A., Hurtig, M. B., Snow, M., Rodeo, S., & Buschmann, M. D. (2018). Freeze-Dried Chitosan-Platelet-Rich Plasma Implants for Rotator Cuff Tear Repair: Pilot Ovine Studies. ACS Biomaterials Science and Engineering, 4(11), 3737-3746. Lien externe
Deprés-Tremblay, G., Chevrier, A., Tran-Khanh, N., Nelea, M., & Buschmann, M. D. (2018). Chitosan inhibits platelet-mediated clot retraction, increases platelet-derived growth factor release, and increases residence time and bioactivity of platelet-rich plasma in vivo. Biomedical Materials, 13(1), 11 pages. Lien externe
Deschênes-Allard, F., Robelin, C., Zanghi, D., Bouvet, S., Ory, S., Véron, E., Machado, K., Bessada, C., & Chartrand, P. (2018). Experimental and thermodynamic assessment of the fluoride-rich region in the Cu-O-F system. Thermochimica Acta, 663, 194-214. Lien externe
Diffo, C., & Stuart, P. R. (septembre 2018). Early-Stage Product Design Methodology for Retrofit Implementation of the Lignin-Based Biorefinery [Communication écrite]. 1st PAPTAC International Lignin Conference, Edmonton, Alberta, Canada. Non disponible
Durocher, Y., Toussaint, C., & Henry, O. (mai 2018). Regulation of recombinant protein expression during CHO pool selection enhances high producer frequency [Communication écrite]. Cell Culture Engineering XVI, Tampa, FL. Non disponible
Dwivedi, G., Chevrier, A., Hoemann, C. D., & Buschmann, M. D. (2018). Bone Marrow Progenitor Cells Isolated from Young Rabbit Trochlea Are More Numerous and Exhibit Greater Clonogenic, Chondrogenic, and Osteogenic Potential than Cells Isolated from Condyles. CARTILAGE, 9(4), 378-390. Lien externe
Elfiad, A., Boffito, D. C., Khemassia, S., Galli, F., Chegrouche, S., & Meddour-Boukhobza, L. (2018). Eco-friendly synthesis from industrial wastewater of Fe and Cu nanoparticles over NaX zeolite and activity in 4-nitrophenol reduction. Canadian Journal of Chemical Engineering, 96(7), 1566-1575. Lien externe
Elfiad, A., Galli, F., Djadoun, A., Sennour, M., Chegrouche, S., Meddour-Boukhobza, L., & Boffito, D. C. (2018). Natural α-Fe2O3 as an efficient catalyst for the p-nitrophenol reduction. Materials Science and Engineering: B, 229, 126-134. Lien externe
Ellingsen, L., Holland, A., Drillet, J.-F., Peters, W., Eckert, M., Concepcion, C., Ruiz, O., Colin, J.-F., Knipping, E., Pan, Q., Wills, R., & Majeau-Bettez, G. (2018). Environmental screening of electrode materials for a rechargeable aluminum battery with an AlCl3/EMIMCl electrolyte. Materials, 11(6), 936. Disponible
Esmizadeh, E., Irani, A., Naderi, G., Ghoreishy, M. H. R., & Dubois, C. (2018). Effect of carbon nanotube on PA6/ECO composites: Morphology development, rheological, and thermal properties. Journal of Applied Polymer Science, 135(12), 9 pages. Lien externe
Esmizadeh, E., Khalili, S., Vahidifar, A., Naderi, G., & Dubois, C. (2018). Waste Polymethyl Methacrylate (PMMA): Recycling and High-Yield Monomer Recovery. Dans Torres Martínez, L. M., Vasilievna Kharissova, O., & Ildusovich Kharisov, B. (édit.), Handbook of Ecomaterials (p. 1-33). Lien externe
Farhanian, D., De Crescenzo, G., & Tavares, J. R. (2018). Large-Scale Encapsulation of Magnetic Iron Oxide Nanoparticles via Syngas Photo-Initiated Chemical Vapor Deposition. Scientific Reports, 8(1). Disponible
Galli, F., Patience, N. A., & Boffito, D. C. (2018). High-Temperature Conversion of Fats: Cracking, Gasification, Esterification, and Transesterification. Dans Recent Advancements in Biofuels and Bioenergy Utilization (p. 205-225). Lien externe
Galli, F., Pirola, C., Previtali, D., Manenti, F., & Bianchi, C. L. (2018). Eco design LCA of an innovative lab scale plant for the production of oxygen-enriched air. Comparison between economic and environmental assessment. Journal of Cleaner Production, 171(Supplement), 147-152. Lien externe
Galli, F., Previtali, D., Bozzano, G., Bianchi, C. L., Manenti, F., & Pirola, C. (2018). Production and application of O2 enriched air produced by fresh and salt water desorption in chemical plants. Journal of Environmental Management, 217, 621-628. Lien externe
Gancheva, T. P. (2018). Synthèse et caractérisation d'hydrogels macroporeux contenant des nanoparticules pour des procédés catalytiques hétérogènes en écoulement continu [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Gancheva, T., & Virgilio, N. (2018). Tailored Macroporous Hydrogels with Nanoparticles Display Enhanced and Tunable Catalytic Activity. ACS Applied Materials and Interfaces, 10(25), 21073-21078. Lien externe
Gancheva, T., Gazil, O., Drevelle, O., Liberelle, B., Sarazin, P., Faucheux, N., & Virgilio, N. (mai 2018). Caractérisation des NPs dans des matrices polymères et hydrogels [Présentation]. Dans 5e Atelier du GDRI Nanomatériaux Multifonctionnels Contrôlés, Port Argelès, France. Non disponible
Gauthier, M., MacNeil, D., Wontcheu, J., Chartrand, P., & Liang, G. (2018). Process for preparing crystalline electrode materials and materials obtained therefrom. (Brevet no US9871245). Lien externe
Gazil, O., & Virgilio, N. (juin 2018). Controlling the localization of gold nanoparticles during synthesis in microstructured porous hydrogels [Affiche]. CREPEC Annual Student Colloquium, Montréal, Québec. Non disponible
Gazil, O., & Virgilio, N. (janvier 2018). Controlling the localization of gold nanoparticles during synthesis in microstructured porous hydrogels [Présentation]. Dans Polytechnique/McGill Chemical Engineering Research Day, Montréal, Québec. Non disponible
Gheribi, A. E. (mai 2018). Determination of optimal compositions and properties for phase change materials. Case study: Solar electric generating station IX [Présentation]. Dans Optimization Days 2018, Montréal, QC. Non disponible
Gheribi, A. E., Machado, K., Zanghi, D., Bessada, C., Salanne, M., & Chartrand, P. (2018). On the determination of ion transport numbers in molten salts using molecular dynamics. Electrochimica Acta, 274, 266-273. Lien externe
Gheribi, A. E., Pelton, A., Bélisle, E., Le Digabel, S., & Harvey, J.-P. (2018). On the prediction of low-cost high entropy alloys using new thermodynamic multi-objective criteria. ACTA Materialia, 161, 73-82. Lien externe
Girard, C. (2018). Modélisation et optimisation d'un procédé de traitement mécanique pour la valorisation d'un courant hétérogène de matières résiduelles solides [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Grmela, M. (2018). GENERIC guide to the multiscale dynamics and thermodynamics. Journal of Physics Communications, 2(3), 032001 (18 pages). Disponible
Grmela, M., & Pavelka, M. (2018). Landau damping in the multiscale Vlasov theory. Kinetic and Related Models, 11(3), 521-545. Lien externe
Habibzadeh, S., Zabeida, O., Argoitia, A., Sargent, R., Sapieha, J.-E., Chaouki, J., & Martinu, L. (2018). Conformal multilayer photocatalytic thin films on fine particles by atmospheric pressure fluidized bed chemical vapor deposition. Industrial & Engineering Chemistry Research, 57(31), 10345-10353. Lien externe
Hadjab, I., Sim, S., Karhula, S. S., Kauppinen, S., Garon, M., Quenneville, E., Lavigne, P., Lehenkari, P. P., Saarakkala, S., & Buschmann, M. D. (2018). Electromechanical properties of human osteoarthritic and asymptomatic articular cartilage are sensitive and early detectors of degeneration. Osteoarthritis and Cartilage, 26(3), 405-413. Lien externe
Hamzehlouia, S., & Chaouki, J. (2018). Infrared Thermopile Temperature Measurement Technique in Microwave Heating Systems. Journal of Chemical and Petroleum Engineering, 52(2), 201-210. Lien externe
Hamzehlouia, S., Jaffer, S., & Chaouki, J. (2018). Microwave heating-assisted catalytic dry reforming of methane to syngas. Scientific Reports, 8(1), 8940 (7 pages). Disponible
Hamzehlouia, S., Shabanian, J., Latifi, M., & Chaouki, J. (2018). Effect of microwave heating on the performance of catalytic oxidation of n-butane in a gas-solid fluidized bed reactor. Chemical Engineering Science, 192, 1177-1188. Lien externe
Harvey, J.-P., Saadatkhah, N., Dumont-Vandewinkel, G., Ackermann, S., & Patience, G. S. (2018). Experimental methods in chemical engineering: Differential scanning calorimetry-DSC. Canadian Journal of Chemical Engineering, 96(12), 2518-2525. Lien externe
Herman, C., Spreutels, L., Turomzsa, N., Konagano, E. M., & Haut, B. (2018). Convective drying of fermented Amazonian cocoa beans (Theobroma cacao var. Forasteiro). Experiments and mathematical modeling. Food and Bioproducts Processing, 108, 81-94. Lien externe
Hertwich, E., Heeren, N., Kuczenski, B., Majeau-Bettez, G., Myers, R. J., Pauliuk, S., Stadler, K., & Lifset, R. (2018). Nullius in Verba: Advancing data transparency in industrial ecology. Journal of Industrial Ecology, 22(1), 6-17. Disponible
Heshmati, V., Kamal, M. R., & Favis, B. D. (2018). Cellulose nanocrystal in poly(lactic acid)/polyamide11 blends: Preparation, morphology and co-continuity. European Polymer Journal, 98(Supplement), 11-20. Lien externe
Heshmati, V., Kamal, M. R., & Favis, B. D. (2018). Tuning the localization of finely dispersed cellulose nanocrystal in poly (lactic acid)/bio-polyamide11 blends. Journal of Polymer Science, Part B: Polymer Physics, 56(7), 576-587. Lien externe
Hollender, M., Harjunkoski, L., Li, N., Chioua, M., Graven, T.-G., & Rozou, M. (2018). Computer system and method for improved monitoring of the technical state of industrial systems. (Demande de brevet no EP3404589). Lien externe
Hosseininasab, S. (2018). Syngas/Photo-Initiated Chemical Vapor Deposition to Modify Single-Walled Carbon Nanotubes [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Hussain, S. A. (2018). Dynamic Modeling and Intermittent Operation of a Flow-Through Microbial Electrolysis Cell [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Hussain, S. A., Perrier, M., & Tartakovsky, B. (2018). Long-term performance of a microbial electrolysis cell operated with periodic disconnection of power supply. RSC Advances, 8(30), 16842-16849. Disponible
Hussain, S. A., Perrier, M., & Tartakovsky, B. (2018). Real-time monitoring of a microbial electrolysis cell using an electrical equivalent circuit model. Bioprocess and Biosystems Engineering, 41(4), 543-553. Lien externe
Jahan, N. (2018). Development of the Piezoelectric Properties of Poly(Vinylidene Fluoride) Based Ferroelectrics and Ferroelectrets Using Fillers and Mechanical Stretching [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Jahan, N., Mighri, F., Rodrigue, D., & Ajji, A. (2018). Synergistic improvement of piezoelectric properties of PVDF/ CaCO3/montmorillonite hybrid nanocomposites. Applied Clay Science, 152, 93-100. Lien externe
Jalali Dil, E., Kim, S. C., Saffar, A., Ajji, A., Zare, R. N., Sattayapiwat, A., Esguerra, V., & Bowen, R. A. R. (2018). Surface characterization and free thyroid hormones response of chemically modified poly(ethylene terephthalate) blood collection tubes. Applied Surface Science, 442, 602-612. Lien externe
Jean, S., Levasseur, A., & Stuart, P. R. (octobre 2018). Fast Pyrolysis Process Selection Emphasizing Environmental Performance [Présentation]. Dans 68th Canadian Society for Chemical Engineering (CSChE) Conference, Toronto, ON, Canada. Non disponible
Jolliet, O., Anton, A., Boulay, A.-M., Cherubini, F., Fantke, P., Levasseur, A., McKone, T. E., Michelsen, O., Mila i Canals, L., Motoshita, M., Pfister, S., Verones, F., Vigon, B., & Frischknecht, R. (2018). Global guidance on environmental life cycle impact assessment indicators: impacts of climate change, fine particulate matter formation, water consumption and land use. International Journal of Life Cycle Assessment, 23(11), 2189-2207. Lien externe
Kanani Aghkand, Z., Jalali Dil, E., Ajji, A., & Dubois, C. (2018). Simulation of Heat Transfer in Heat Sealing of Multilayer Polymeric Films: Effect of Process Parameters and Material Properties. Industrial & Engineering Chemistry Research, 57(43), 14571-14582. Lien externe
Kang, Y.-B., & Jung, S.-H. (2018). Oxide Stability Diagram of Liquid Steels - Construction and Utilization. ISIJ International, 58(8), 1371-1382. Lien externe
Kang, Y.-B., & Tafwidli, F. (août 2018). On the Evaporation of S from Liquid FeCS Alloy [Communication écrite]. 1rst Global Conference on Extractive Metallurgy (Extraction 2018), Ottawa, Ont.. Lien externe
Karengera, E., Robotham, A., Kelly, J., Durocher, Y., De Crescenzo, G., & Henry, O. (2018). Concomitant reduction of lactate and ammonia accumulation in fed-batch cultures: Impact on glycoprotein production and quality. Biotechnology Progress, 34(2), 494-504. Lien externe
Karim, R. A. (2018). Regionalized Aquatic Ecotoxicity Characterization Factor for Zinc Soil Emissions Accounting for Speciation and for the Transfer Though Groundwater [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Kasparek, E., Tavares, J. R., Wertheimer, M. R., & Girard-Lauriault, P.-L. (2018). VUV Photodeposition of Thiol-Terminated Films: A Wavelength-Dependent Study. Langmuir, 34(41), 12234-12243. Disponible
Kasparek, E., Thiry, D., Tavares, J. R., Wertheimer, M. R., Snyders, R., & Girard-Lauriault, P.-L. (2018). Growth mechanisms of sulfur-rich plasma polymers: Binary gas mixtures versus single precursor. Plasma Processes and Polymers, 15(7), 1800036. Disponible
Khan, H., Rigamonti, M. G., Patience, G. S., & Boffito, D. C. (2018). Spray dried TiO2/WO3heterostructure for photocatalytic applications with residual activity in the dark. Applied Catalysis B: Environmental, 226, 311-323. Lien externe
Kim, D.-H., Kim, W., & Kang, Y.-B. (2018). Electrochemical desulfurization of molten steel with molten slag: Reaction rate and current efficiency. Journal of The Electrochemical Society, 165(14), E816-E825. Lien externe
Laflaquière, B., Leclercq, G., Choey, C., Chen, J., Peres, S., Ito, C., & Jolicoeur, M. (2018). Identifying biomarkers of Wharton's Jelly mesenchymal stromal cells using a dynamic metabolic model: the cell passage effect. Metabolites, 8(1), 18. Disponible
Lagneau, J. (2018). Étude multi-échelles des coûts de gestion de la matière résiduelle organique au Québec [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Lakhdhar, I., Thiffault, E., & Stuart, P. R. (mai 2018). An Expert Knowledge Approach for Designing Sustainable Forest Biomass Supply Chain [Communication écrite]. 26th European Biomass Conference and Exhibition (EUBCE 2018), Copenhagen, Denmark. Lien externe
Latifi, M. (janvier 2018). Development of Advanced Green Processes and Materials: Academia-Industry R&D Approach [Présentation]. Dans International Chemical Engineering Congress & Exhibition, Isfahan, Iran. Non disponible
Lavoie, J., Petre, C. F., & Dubois, C. (2018). Erosivity and performance of nitrogen-rich propellants. Propellants Explosives Pyrotechnics, 43(9), 879-892. Lien externe
LeBreux, M., Gheribi, A. E., Desilets, M., Soucy, G., Chartrand, P., Pelletier, P., Bilodeau, J.-F., & Lombard, D. (octobre 2018). 3D flow of deposits on the surface of cathode blocks in an aluminium electrolysis cell [Communication écrite]. 36th International ICSOBA, Belem, Brazil. Lien externe
Leclaire, S., Latt, J., Vidal, D., & Bertrand, F. (2018). Multiphase periodic pressure difference boundary condition enhanced by a proportional-integral-derivative controller for the lattice Boltzmann method. International Journal for Numerical Methods in Fluids, 88(9), 434-446. Lien externe
Leclaire, S., Vidal, D., Fradette, L., & Bertrand, F. (juin 2018). Lattice Boltzmann modeling of immiscible liquid-liquid flows in static mixers [Communication écrite]. North American Mixing Forum (Mixing XXVI), San Juan, Puerto Rico. Non disponible
Leclerc, P. (2018). Dépolymérisation du polystyrène par pyrolyse micro-onde [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Leclerc, P., Doucet, J., & Chaouki, J. (2018). Development of a microwave thermogravimetric analyzer and its application on polystyrene microwave pyrolysis kinetics. Journal of Analytical and Applied Pyrolysis, 130, 209-215. Lien externe
Lesage, P., Mutel, C., Schenker, U., & Margni, M. (2018). Uncertainty analysis in LCA using precalculated aggregated datasets. International Journal of Life Cycle Assessment, 23(11), 2248-2265. Lien externe
Li, D., Kasprzak, W., Patience, G. S., Sauriol, P., Villazón Amarís, H., Dollé, M., Gauthier, M., Rousselot, S., Talebi-Esfandarani, M., Bibienne, T., Sun, X., Liu, Y., & Liang, G. (2018). Production of lithium-ion cathode material for automotive batteries using melting casting process. Dans 9th International Symposium on High-Temperature Metallurgical Processing (TMS 2018) (p. 135-146). Lien externe
Li, H. (2018). Wet Media Mill of Lithium Iron Phosphate [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Li, Y., Li, P., Tan, Q., Zhang, Z., Wan, Q., Liu, Z., Subramanian, A., & Qu, X. (2018). Thermal properties and cycling performance of Ca(BH4)2/MgH2composite for energy storage. Chemical Physics Letters, 700, 44-49. Lien externe
Liard, G., Lesage, P., Samson, R., & Stuart, P. R. (2018). Systematic assessment of triticale-based biorefinery strategies: environmental evaluation using life cycle assessment. Biofuels, Bioproducts and Biorefining, 12(S1), S60-S72. Lien externe
Lotfi, S., Mollaabbasi, R., & Patience, G. S. (2018). Kinetics of softwood kraft lignin inert and oxidative thermolysis. Biomass and Bioenergy, 109, 239-248. Lien externe
Louyot, P., Neagoe, C., Galli, F., Pirola, C., Patience, G. S., & Boffito, D. C. (2018). Ultrasound-assisted impregnation for high temperature Fischer-Tropsch catalysts. Ultrasonics Sonochemistry, 48, 523-531. Lien externe
Ma, Z., Patience, G. S., Boffito, D. C., & Pelegrin, D. C. (août 2018). Fecralloy partially oxidizes methane selectively [Communication écrite]. 2nd Natural Gas Utilization Workshop, College Station, TX, United states. Lien externe
Majeau-Bettez, G., Dandres, T., Pauliuk, S., Wood, R., Hertwich, E., Samson, R., & Strømman, A. H. (2018). Choice of allocations and constructs for attributional or consequential life cycle assessment and input-output analysis. Journal of Industrial Ecology, 22(4), 656-670. Disponible
Majeau-Bettez, G., Spreutels, L., Tanguay-Rioux, F., Viau, S., Samson, R., & Legros, R. (juin 2018). Toward a parametrized and modular framework based on the integration of MFA and LCA for optimization of municipal solid wastes management [Communication écrite]. 2nd Conference on Life Cycle Assessment of waste - Integrated Residual Resource Management and Assessment, Copenhagen. Non disponible
Martinez-Colunga, J. G., Sanchez-Valdes, S., Blanco-Cardenas, A., Ramirez-Vargas, E., Ramos-de Valle, L. F., Benavides-Cantu, R., Espinoza-Martinez, A. B., Sanchez-Lopez, S., Lozano-Ramirez, T., Lafleur, P., & Karami, S. (2018). Dispersion and exfoliation of nanoclays in itaconic acid func[t]ionalized LDPE by ultrasound treatment. Journal of Applied Polymer Science, 135(20), 10 pages. Lien externe
Mazar, A., Jemaa, N., Al Dajani, W. W., Marinova, M., & Perrier, M. (2018). Influence of membrane filtration on extraction and characteristics of lignin from a kraft dissolving pulp mill pre-hydrolysate. Industrial Crops and Products, 124, 726-734. Lien externe
Mazar, A., Jemaa, N., Wafa Al Dajani, W., Marinova, M., & Perrier, M. (2018). Comparative study: Furfural production from two types of pre-hydrolysates produced using aspen and maple chips. Biomass and Bioenergy, 111, 103-113. Lien externe
Melendez, J., & Stuart, P. R. (2018). Systematic assessment of triticale-based biorefinery strategies: A biomass procurement strategy for economic success. Biofuels, Bioproducts and Biorefining, 12(S1), S21-S34. Lien externe
Melendez, J., Feng, Y., Audy, J.-F., Lebel, L., & Stuart, P. R. (2018). Optimization of a biomass procurement network with integrated forest harvesting for an eastern canadian newsprint mill. J-for-Journal of Science & Technology for Forest Products and Processes, 6(5), 32-44. Non disponible
Mellahi, K. (2018). Procédés de culture cellulaire pour un système CHO inductible : cuvée-alimentée et perfusion [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Mirarabrazi, M., Stolarska, O., Smiglak, M., & Robelin, C. (2018). Solid liquid equilibria for a pyrrolidinium-based common-cation ternary ionic liquid system, and for a pyridinium-based ternary reciprocal ionic liquid system: an experimental study and a thermodynamic model. Physical Chemistry Chemical Physics, 20(1), 637-657. Lien externe
Mohammadi, R. S., Tabatabaei, S. H., & Ajji, A. (2018). Effect of nanoclay localization on the peel performance of PE based blend nanocomposite sealants. Applied Clay Science, 152, 113-123. Lien externe
Mohammadi, R. S., Tabatabaei, S. H., & Ajji, A. (2018). Peelable clay/PE nanocomposite seals with ultra-wide peelable heat seal temperature window. Applied Clay Science, 158, 132-142. Lien externe
Mohebbi, A., Mighri, F., Ajji, A., & Rodrigue, D. (2018). Cellular Polymer Ferroelectret: A Review on Their Development and Their Piezoelectric Properties. Advances in Polymer Technology, 37(2), 468-483. Lien externe
Morin, S., & Farand, P. (juin 2018). The construction of a digital platform aggregating active learning strategies for engineering education [Communication écrite]. Canadian Engineering Education Association (CEEA 2018), Vancouver, BC, Canada (7 pages). Publié dans Proceedings of the Canadian Engineering Education Association (CEEA). Disponible
Mosaferi, Z. (2018). Optimization of the Rate and Level of Porosity Generation in Electrode Films for Application in Batteries [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Moussavi, A., & Stuart, P. R. (février 2018). Bridge Method for Energy Analysis and its Application in the Pulp and Paper Industry [Communication écrite]. 103rd PaperWeek- BioFor Conference, Montréal, Qc, Canada. Lien externe
Moussavi, A., Bonhivers, J. C., & Stuart, P. R. (octobre 2018). Sequential Decision-Making Framework for the Application of a Site-Wide Energy Analysis Based on Bridge Method [Présentation]. Dans 68th Canadian Society for Chemical Engineering (CSChE) Conference, Toronto, ON, Canada. Non disponible
Muller, S., Mutel, C., Lesage, P., & Samson, R. (2018). Effects of Distribution Choice on the Modeling of Life Cycle Inventory Uncertainty: An Assessment on the Ecoinvent v2.2 Database. Journal of Industrial Ecology, 22(2), 300-313. Lien externe
Muñoz-Ávila, J. M., Sánchez-Valdes, S., Yáñez-Flores, I., Rodriguez-Fernandez, O. S., Neira-Velázquez, M. G., Hernández-Hernández, E., Flores-Gallardo, S., Avalos-Belmontes, F., Lozano-Ramirez, T., Morales-Cepeda, A., & Lafleur, P. (2018). Influence of carbon nanofiber functionalization and compatibilizer on the physical properties of carbon nanofiber reinforced polypropylene nanocomposites. Polymer Composites, 39(10), 3575-3585. Lien externe
Nunez, M., Rosenbaum, R. K., Karimpour, S., Boulay, A.-M., Lathuilliere, M. J., Margni, M., Scherer, L., Verones, F., & Pfister, S. (2018). A multimedia hydrological fate modeling framework to assess water consumption impacts in life cycle assessment. Environmental Science and Technology, 52(8), 4658-4667. Lien externe
Orabi, L. B. (2018). Électrodialyse de la liqueur noire avec membrane bipolaire-caractérisation de l'hydrodynamique d'une cellule et relation à la performance [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Osman, M., Virgilio, N., Mighri, F., & Rouabhia, M. (décembre 2018). Development of functional biopolymer-based cartilage tissue [Affiche]. Annual CREPEC Colloquium, Montréal, Québec. Non disponible
Ouzilleau, P., Gheribi, A. E., & Chartrand, P. (mai 2018). Prédiction de la formation de CO2/CO par le processus anodique primaire durant l'électrolyse de l'aluminium par un modèle électro-thermodynamique pour les cristallites de coke [Présentation]. Dans 86e Congrès de l'ACFAS, Chicoutimi, QC. Non disponible
Ouzilleau, P., Gheribi, A. E., & Chartrand, P. (2018). Prediction of CO2/CO formation from the (primary) anode process in aluminium electrolysis using an electrothermodynamic model (for coke crystallites). Electrochimica Acta, 259, 916-929. Lien externe
Ouzilleau, P., Gheribi, A. E., & Chartrand, P. (2018). Thermodynamic description of graphitizable carbons and the irreversible graphitization process. Carbon, 132, 556-564. Lien externe
Paran, S. M. R., Naderi, G., Ghoreishy, M. H. R., & Dubois, C. (2018). Essential work of fracture and failure mechanisms in dynamically vulcanized thermoplastic elastomer nanocomposites based on PA6/NBR/XNBR-grafted HNTs. Engineering Fracture Mechanics, 200, 251-262. Lien externe
Paran, S. M. R., Naderi, G., Ghoreishy, M. H. R., & Dubois, C. (2018). Multiscale modeling of polymer systems comprising nanotube-like inclusions by considering interfacial debonding under plastic deformations. Composite Structures, 194, 302-315. Lien externe
Patience, G. S. (2018). Experimental methods in chemical engineering: Preface. Canadian Journal of Chemical Engineering, 96(11), 2312-2316. Lien externe
Patience, G. S., Karirekinyana, G., Galli, F., Patience, N. A., Kubwabo, C., Collin, G., Bizimana, J. C., & Boffito, D. C. (2018). Sustainable manufacture of insect repellents derived from Nepeta cataria. Scientific Reports, 8(1), 2235 (9 pages). Disponible
Patience, G. S., Patience, C. A., & Bertrand, F. (2018). Chemical engineering research synergies across scientific categories. Canadian Journal of Chemical Engineering, 96(8), 1684-1690. Lien externe
Pavelka, M., Klika, V., & Grmela, M. (2018). Multiscale thermo-dynamics: introduction to GENERIC. Lien externe
Pavelka, M., Klika, V., & Grmela, M. (2018). Thermodynamic explanation of Landau damping by reduction to hydrodynamics. Entropy, 20(6). Disponible
Peshkov, I., Pavelka, M., Romenski, E., & Grmela, M. (2018). Continuum mechanics and thermodynamics in the Hamilton and the Godunov-type formulations. Continuum Mechanics and Thermodynamics, 30(6), 1343-1378. Lien externe
Pilote, L. (2018). Développement d'un modèle thermodynamique pour les alliages d'usinage Al-Mg-X(X=Bi, Pb, Sn) afin d'optimiser les teneurs en Bi, Pb et Sn [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Pilote, L., Gheribi, A. E., & Chartrand, P. (2018). Study of the solubility of Pb, Bi and Sn in aluminum by mixed CALPHAD/DFT methods: Applicability to aluminum machining alloys. CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry, 61, 275-287. Lien externe
Pirola, C., Galli, F., & Patience, G. S. (2018). Experimental methods in chemical engineering: Temperature programmed reduction-TPR. Canadian Journal of Chemical Engineering, 96(11), 2317-2320. Lien externe
Pombert, O. (2018). Synthèse de catalyseurs de cobalt et de magnésium supportés sur du nitrure de bore pour l'oxydation partielle du méthane [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Poncsák, S., Gheribi, A. E., Kiss, L. I., Chartrand, P., Guérard, S., & Bilodeau, J. F. (2018). Experimental determination of the thermal diffusivity of industrial grade synthetic cryolite between 200 and 850 °C and comparison with theoretical predictions. Journal of Thermal Analysis and Calorimetry, 135(4), 2059-2068. Lien externe
Pradinaud, C., Northey, S. A., Amor, B., Bare, J., Benini, L., Berger, M., Boulay, A.-M., Junqua, G., Lathuilliere, M., Margni, M., Motoshita, M., Niblick, B., Payen, S., Pfister, S., Quinteiro, P., Sonderegger, T., & Rosenbaum, R. (mai 2018). Adding the resource dimension to the WULCA framework on assessing freshwater use in LCA [Affiche]. ETAC Europe 28th Annual Meeting: Responsible and Innovative Research for Environmental Quality, Rome, Italy. Non disponible
Raphael, W., Martel, T., Landry, V., & Tavares, J. R. (2018). Surface engineering of wood substrates to impart barrier properties: a photochemical approach. Wood Science and Technology, 52(1), 193-207. Disponible
Robelin, C., Mirarabrazi, M., Stolarska, O., & Smiglak, M. (mai 2018). Modeling the thermodynamic properties of “ionic liquid” mixtures [Présentation]. Dans CALPHAD XLVII, Querétaro, Mexico. Non disponible
Rocha, F. S., Gomes, A. J., Lunardi, C. N., Kaliaguine, S., & Patience, G. S. (2018). Experimental methods in chemical engineering: Ultraviolet visible spectroscopy - UV-Vis. Canadian Journal of Chemical Engineering, 96(12), 2512-2517. Lien externe
Rokbani, H. (2018). Élaboration de nouveaux matériaux nanocomposites antibactériens à base de nanoparticules d'oxyde de zinc [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Rokbani, H., & Ajji, A. (2018). Rheological properties of poly(lactic acid) solutions added with metal oxide nanoparticles for electrospinning. Journal of Polymers and the Environment, 26(6), 2555-2565. Lien externe
Rokbani, H., Daigle, F., & Ajji, A. (2018). Combined effect of ultrasound stimulations and autoclaving on the enhancement of antibacterial activity of ZnO and SiO₂/ZnO nanoparticles. Nanomaterials, 8(3). Disponible
Rosenbaum, R. K., Hauschild, M. Z., Boulay, A.-M., Fantke, P., Laurent, A., Núñez, M., & Vieira, M. (2018). Life Cycle Impact Assessment. Dans Life Cycle Assessment: Theory and Practice (p. 167-270). Lien externe
Rouabhia, M., Mighri, N., Mao, J., Park, H. J., Mighri, F., Ajji, A., & Zhang, Z. (2018). Surface treatment with amino acids of porous collagen based scaffolds to improve cell adhesion and proliferation. Canadian Journal of Chemical Engineering, 96(10), 2236-2242. Lien externe
Roy, P.-O., Bulle, C., & Deschênes, L. (2018). Global-scale atmospheric modeling of aerosols to assess metal source-receptor relationships for life cycle assessment. International Journal of Life Cycle Assessment, 24(1), 93-103. Lien externe
Ruiz, E., Pupin, C., Ross, A., Dubois, C., & Rietsch, J. C. (octobre 2018). Solving porosity growth during composite manufacturing [Communication écrite]. 5th Annual Composites and Advanced Materials Expo (CAMX 2018), Dallas, TX, United states. Lien externe
Saadatkhah, N., Aghamiri, S., Talaie, M. R., & Patience, G. S. (2018). Flame-assisted spray pyrolysis to size-controlled LiyAlxMn2-xO4: A supervised machine learning approach. CrystEngComm, 20(46), 7590-7601. Lien externe
Sabri, F., Berthomier, K., Fradette, L., Tavares, J. R., & Virgilio, N. (mai 2018). Improving the separation of Pickering emulsion constituents by using alginate-grafted particles [Affiche]. 16th Conference of the International Association of Colloid and Interface Scientists, Rotterdam, Pays-Bas. Non disponible
Sabri, F., Berthomier, K., Marion, A., Fradette, L., Tavares, J. R., & Virgilio, N. (2018). Sodium alginate-grafted submicrometer particles display enhanced reversible aggregation/disaggregation properties. Carbohydrate Polymers, 194, 61-68. Disponible
Sabri, F., Fradette, L., Tavares, J. R., & Virgilio, N. (janvier 2018). Improving the separation of Pickering emulsion constituents by using alginate-grafted particles [Présentation]. Dans Polytechnique/McGill Chemical Engineering Research Day, Montréal, Québec. Non disponible
Safdari, F., Bagheriasl, D., Carreau, P., Heuzey, M.-C., & Kamal, M. R. (2018). Rheological, mechanical, and thermal properties of polylactide/cellulose nanofiber biocomposites. Polymer Composites, 39(5), 1752-1762. Lien externe
Sahraeian, R., Esmizadeh, E., Esfandeh, M., Naderi, G., & Dubois, C. (2018). Hybrid effect of nanoperlite and nanoclay on mechanical and rheological properties of low-density polyethylene. Journal of Polymer & Composites, 6(1), 32-41. Lien externe
Samih, S., Farag, S., & Chaouki, J. (2018). Innovative microreactor for low-grade feedstock gasification. Dans Yun, Y. (édit.), Gasification for low-grade feedstock (p. 237-253). Disponible
Samih, S., Latifi, M., Farag, S., Leclerc, P., & Chaouki, J. (2018). From complex feedstocks to new processes: the role of the newly developed micro-reactors. Chemical Engineering and Processing - Process Intensification, 131, 92-105. Lien externe
Sanaei, S., & Stuart, P. R. (2018). Systematic assessment of triticale-based biorefinery strategies: techno-economic analysis to identify investment opportunities. Biofuels, Bioproducts and Biorefining, 12(S1), S46-S59. Lien externe
Sanaei, S., Chambost, V., & Stuart, P. R. (2018). Systematic assessment of triticale-based biorefinery strategies: sustainability assessment using multi-criteria decision-making (MCDM). Biofuels, Bioproducts and Biorefining, 12(S1), S73-S86. Lien externe
Sánchez-Valdes, S., Zapata-Dominguez, A. G., Graciano-Verdugo, A. Z., Ramos de Valle, L. F., Morales-Cepeda, A., Ramírez-Vargas, E., Rodriguez-Fernandez, O. S., Lozano-Ramírez, T., Flores-Gallardo, S., Espinoza-Martinez, A. B., Méndez-Nonell, J., Lafleur, P., & Karami, S. (2018). Influence of modified polyethylene compatibilizer on filler dispersion and flammability characteristics of linear low density polyethylene/cyclo olefin copolymer blends containing flame retardant combinations. Journal of Adhesion Science and Technology, 32(14), 1560-1577. Lien externe
Sanchez-Valdes, S., Zapata-Dominguez, A. G., Martinez-Colunga, J. G., Mendez-Nonell, J., de Valle, L. F. R., Espinoza-Martinez, A. B., Morales-Cepeda, A., Lozano-Ramirez, T., Lafleur, P., & Ramirez-Vargas, E. (2018). Influence of functionalized polypropylene on polypropylene/graphene oxide nanocomposite properties. Polymer Composites, 39(4), 1361-1369. Lien externe
Schwartz, L., da Veiga Moreira, J., & Jolicoeur, M. (2018). Physical forces modulate cell differentiation and proliferation processes. Journal of Cellular and Molecular Medicine, 22(2), 738-745. Lien externe
Shishin, D., Jak, E., & Decterov, S. (2018). Thermodynamic Assessment of Slag-Matte-Metal Equilibria in the Cu-Fe-O-S-Si System. Journal of Phase Equilibria and Diffusion, 39(5), 456-475. Lien externe
Shu, S., Bertrand, F., & Chaouki, J. (janvier 2018). Design, optimization and scale-up of photobioreactor with CFD [Communication écrite]. 2018 New Frontiers in Multiphase CFD for the 21st Century Mix, Oaxaca, Mexico. Non disponible
Shu, S., Vidal, D., Bertrand, F., & Chaouki, J. (août 2018). Eulerian-Eulerian-Lagrangian Simulation of Multiphase Flows in Microalgae Photobioreactors for CO₂ Capture [Résumé]. New Frontiers in Multiphase CFD for the 21st Century Energy Mix, Oaxaca, Mexico. Non disponible
Shukla, A., Jung, I.-H., Decterov, S., & Pelton, A. (2018). Thermodynamic evaluation and optimization of the BaO-SiO2 and BaO-CaO-SiO2 systems. Calphad, 61, 140-147. Lien externe
Smith, A. L., Gheribi, A. E., Ocadiz-Flores, J. A., Capelli, E., Alders, D., van Oudenaren, G., Martin, P., & Rothe, J. (octobre 2018). A new approach for comprehensive modelling of molten salt properties [Présentation]. Dans Thorium Energy Conference 2018, Brussels, Belgium. Non disponible
Sojoudiasli, H., Heuzey, M.-C., & Carreau, P. (2018). Mechanical and morphological properties of cellulose nanocrystal-polypropylene composites. Polymer Composites, 39(10), 3605-3617. Lien externe
Somé, A., Dandres, T., Gaudreault, C., Majeau-Bettez, G., Wood, R., & Samson, R. (2018). Coupling input-output tables with macro-life cycle assessment to assess worldwide impacts of biofuels transport policies. Journal of Industrial Ecology, 22(4), 643-655. Disponible
Stolarska, O., Mirarabrazi, M., Robelin, C., & Smiglak, M. (avril 2018). Solid-liquid equilibria for a pyrrolidinium-based common-cation ternary ionic liquid system, and for a pyridinium-based ternary reciprocal ionic liquid system [Affiche]. 2nd Advances in Green Chemistry Conference (AGC 2018), Poznan, Poland. Non disponible
Stuart, P. R. (mars 2018). Building Canada's BioEconomy Cluster: Value Chain Gaps and Their Solutions [Présentation]. Dans BioProducts AgSci Cluster Conference, Bioindustrial Innovation Canada (BIC), Toronto, ON, Canada. Non disponible
Stuart, P. R. (octobre 2018). Creating Competitive Advantage in the BioEconomy Through Clusters [Présentation]. Dans 10th IberoAmerican Congress on Pulp and Paper Research (CIADICYP 2018), São Paulo, Brazil. Non disponible
Stuart, P. R. (juillet 2018). International Symposium on Bioplastics, Biocomposites and Biorefining [Présentation]. Dans International Symposium on Bioplastics, Biocomposites and Biorefining, Guelph, ON, Canada. Lien externe
Stucchi, M., Bianchi, C. L., Argirusis, C., Pifferi, V., Neppolian, B., Cerrato, G., & Boffito, D. C. (2018). Ultrasound assisted synthesis of Ag-decorated TiO₂ active in visible light. Ultrasonics Sonochemistry, 40, 282-288. Lien externe
Stucchi, M., Boffito, D. C., Pargoletti, E., Cerrato, G., Bianchi, C. L., & Cappelletti, G. (2018). Nano-MnO₂ decoration of TiO₂ microparticles to promote gaseous ethanol visible photoremoval. Nanomaterials, 8(9). Disponible
Stucchi, M., Elfiad, A., Rigamonti, M., Khan, H., & Boffito, D. C. (2018). Water treatment: Mn-TiO2 synthesized by ultrasound with increased aromatics adsorption. Ultrasonics Sonochemistry, 44, 272-279. Lien externe
Stucchi, M., Galli, F., Bianchi, C. L., Pirola, C., Boffito, D. C., Biasioli, F., & Capucci, V. (2018). Simultaneous photodegradation of VOC mixture by TiO2 powders. Chemosphere, 193, 198-206. Lien externe
Tallec, G., Loh, C., Liberelle, B., Garcia-Ac, A., Duy, S. V., Sauve, S., Banquy, X., Murschel, F., & De Crescenzo, G. (2018). Adequate reducing conditions enable conjugation of oxidized peptides to polymers by one-pot thiol click chemistry. Bioconjugate Chemistry, 29(11), 3866-3876. Lien externe
Téguia, C. D., Chambost, V., & Stuart, P. R. (2018). Systematic assessment of triticale-based biorefinery strategies: market competitive analysis for business model development. Biofuels, Bioproducts and Biorefining, 12(S1), S35-S45. Lien externe
Theiri, M. (2018). Développement de stratégies de bio-détoxification de pré-hydrolysats lignocellulosiques pour fermentation ABE en butanol [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Urtnowski-Morin, C. (2018). Modélisation phénoménologique du procédé de biométhanisation au sein d'une analyse de flux de matières pour l'évaluation de scénarios de traitement [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Vaillancourt, K., Bahn, O., Roy, P.-O., & Patreau, V. (2018). Is there a future for new hydrocarbon projects in a decarbonizing energy system? A case study for Québec (Canada). Applied Energy, 218, 114-130. Lien externe
Van Engeland, C., Spreutels, L., Legros, R., & Haut, B. (2018). Convective drying of baker's yeast pellets containing a carrier. Drying Technology, 37(11), 1405-1417. Lien externe
Van Engeland, C., Vidal, D., Spreutels, L., Legros, R., Haut, B., & Bertrand, F. (septembre 2018). Intermittent drying of yeast pellets : a multiscale modeling approach [Communication écrite]. 21st International Drying Symposium (IDL 2019), Valencia, Spain. Non disponible
Veilleux, D., Gopalakrishna Panicker, R. K., Chevrier, A., Biniecki, K., Lavertu, M., & Buschmann, M. D. (2018). Lyophilisation and concentration of chitosan/siRNA polyplexes: Influence of buffer composition, oligonucleotide sequence, and hyaluronic acid coating. Journal of Colloid and Interface Science, 512, 335-345. Lien externe
Vermot des Roches, M. (2018). Modèles de tension de surface pour les sels fondus et les métaux liquides appliqués au procédé Hall-Héroult [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Viau, S. (2018). Méta-analyse des coefficients de substitution en analyse du cycle de vie conséquentielle de la gestion des matières résiduelles [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Viveros Santos, I., Bulle, C., Levasseur, A., & Deschênes, L. (2018). Regionalized terrestrial ecotoxicity assessment of copper-based fungicides applied in viticulture. Sustainability, 10(7). Disponible
Wan, B. (2018). The Role of Particles in the Processing of the Solid-Stabilized Emulsions [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Wan, T.-T., Zhu, A.-K., Li, H.-B., Wang, C.-C., Guo, Y.-M., Shao, Z.-P., & Savadogo, O. (2018). Performance variability of Ba₀.₅Sr₀.₅Co₀.₈Fe₀.₂O₃₋δ cathode on proton-conducting electrolyte SOFCs with Ag and Au current collectors. Rare Metals, 37(8), 633-641. Lien externe
Wang, C.-S., Virgilio, N., Wood-Adams, P. M., & Heuzey, M.-C. (2018). A gelation mechanism for gelatin/polysaccharide aqueous mixtures. Food Hydrocolloids, 79, 462-472. Lien externe
Wang, C.-S., Virgilio, N., Wood-Adams, P. M., & Heuzey, M.-C. (2018). Protein/polysaccharide-based hydrogels prepared by vapor-induced phase separation. Macromolecular Chemistry and Physics, 219(7), 1700504 (6 pages). Lien externe
Wang, H., Liu, Y., Chen, L., Li, X., Wang, J., & Xie, F. (2018). Insights into the multi-scale structure and digestibility of heat-moisture treated rice starch. Food Chemistry, 242(Supplement), 323-329. Lien externe
Wang, J., Tsou, A. H., & Favis, B. D. (2018). Effects of Polyethylene Molecular Weight Distribution on Phase Morphology Development in Poly(p-phenylene ether) and Polyethylene Blends. Macromolecules, 51(22), 9165-9176. Lien externe
Wang, J., Tsou, A. H., Passino, H. L., & Favis, B. D. (2018). PPE-g-HDPE in high-performance Poly(p-Phenylene Ether)/Polyethylene Blends: Synthesis and compatibilization effects. Polymer, 138, 92-102. Lien externe
Wang, K., & Chartrand, P. (2018). A thermodynamic description for water, hydrogen fluoride and hydrogen dissolutions in cryolite-base molten salts. Physical Chemistry Chemical Physics, 20(25), 17324-17341. Lien externe
Wu, Q. (2018). 3D Printing of Multifunctional Chitosan-Based Hydrogels and Nanocomposites [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Wu, Q., Therriault, D., & Heuzey, M.-C. (2018). Processing and properties of chitosan inks for 3D printing of hydrogel microstructures. ACS Biomaterials Science & Engineering, 4(7), 2643-2652. Lien externe
Wu, Q., Zou, S., Gosselin, F., Therriault, D., & Heuzey, M.-C. (2018). 3D printing of a self-healing nanocomposite for stretchable sensors. Journal of Materials Chemistry C, 6(45), 12180-12186. Lien externe
Xiong, Q., Xu, F., Pan, Y., Yang, Y., Gao, Z., Shu, S., Hong, K., Bertrand, F., & Chaouki, J. (2018). Major trends and roadblocks in CFD-aided process intensification of biomass pyrolysis. Chemical Engineering and Processing - Process Intensification, 127, 206-212. Lien externe
Xu, C., Wu, Q., L'Espérance, G., Laberge Lebel, L., & Therriault, D. (2018). Environment-friendly and reusable ink for 3D printing of metallic structures. Materials & Design, 160, 262-269. Disponible
Zadeh, L. G., Chevrier, A., Farr, J., Rodeo, S. A., & Buschmann, M. D. (2018). Augmentation techniques for meniscus repair. Journal of Knee Surgery, 31(1), 99-116. Lien externe
Zakeri, B., Khandal, D., Beuguel, Q., Riedl, B., Tavares, J. R., Carreau, P., & Heuzey, M.-C. (2018). Non-covalent surface modification of cellulose nanocrystals by polyethyleneimine. J-FOR The Journal of Science and Technology for Forest Products and Processes, 7(4), 6-12. Disponible
Zhang, S., & Cicoira, F. (2018). Flexible self-powered biosensors. Nature, 561(7724), 466-467. Lien externe
Zolali, A. M., & Favis, B. D. (2018). Toughening of cocontinuous polylactide/polyethylene blends via an interfacially percolated intermediate phase. Macromolecules, 51(10), 3572-3581. Lien externe
