Items where Author is "Ajji, Abdellah"

Number of items: 519.

Author

Karimi, E., Mohseni Garakani, M., Heuzey, M.-C., Mighri, F., Rosenzweig, D., & Ajji, A. (2026). Melt Electrospinning of Poly(ε-caprolactone)/Poly(ethylene oxide)/Poly(ethylene glycol) Blend: Effects on Structure and Cellular Compatibility. ACS Omega. External link

Talebpour, P., Mighri, F., Ajji, A., Heuzey, M.-C., & Virgilio, N. (2026). Melt Electrospun Fibrillar Microfibers Prepared from Compatibilized Immiscible Polymer Systems. Macromolecules. External link

Mohammadi, M., Younes, G., Yousefzade, O., & Ajji, A. (2026). Challenges in polymer recycling. In Ray, S. S., & Nofar, M. (eds.), Comprehensive Polymer Science (2nd ed., Vol. 4, pp. 502-533). External link

Wireko Boampong, E., Heuzey, M.-C., Claveau-Mallet, D., & Ajji, A. (2026). Removal of cellulose to facilitate microplastics detection in wastewater. ACS ES&T Water. Restricted access

Nekooei, A., & Ajji, A. (2026). Development of antiviral electrospun PET nanofabric functionalized with β-cyclodextrin encapsulated thymol. Materials Today Communications, 54, 115707 (12 pages). External link

Karimi, E., Mohseni Garakani, M., Heuzey, M.-C., Mighri, F., Rosenzweig, D. H., & Ajji, A. (2026). Bioactive Nanocomposite Scaffolds by Melt Electrospinning of Poly-ε-Caprolactone/Polyethylene Oxide/Polyethylene Glycol-Hydroxyapatite Blends for Bone Tissue Engineering. ACS Applied Bio Materials, 9(11), 4837-4848. External link

Karimi, E., Mighri, F., Heuzey, M.-C., & Ajji, A. (2026). Melt Electrospinning of Poly (ε‐Caprolactone)/Polyethylene Oxide/Polyethylene Glycol—Hydroxyapatite Nanocomposite Fibers: Morphology, Properties, and Hydrolytic Degradation. Polymer Engineering and Science, 16 pages. External link

Kordjazi, Z., & Ajji, A. (2026). Titanium Dioxide Catalyzed Butadiene Polymer Based Oxygen Scavenging System. (Patent no. CACA 3097347 C). External link

Younes, G., Heli, B., & Ajji, A. (2026). Blending Poly(dimethylsiloxane) with Poly(lactic acid) Using Polyhydroxyurethane Additives. ACS Applied Engineering Materials. External link

Safaei, M., Ajji, A., Kessler, S., & Saffar, A. (2026). Controlled sustained release of chlorine dioxide gas from extrusion-cast polymeric films to extend shelf life of strawberries. Applied Food Research, 6(1), 101732. External link

Nekooei, A., & Ajji, A. (2026). Integrating Alkali Lignin into Electrospun PET Nanofibers for Enhanced Viral Protection in Respiratory Masks. ACS Omega, 6500-6512. External link

Yousefzade, O., Mohammadi, M., Younes, G., & Ajji, A. (2026). Sustainability in plastic packaging. In Ray, S. S., & Nofar, M. (eds.), Comprehensive Polymer Science (2nd ed., Vol. 4, pp. 534-569). External link

Younes, G., Mohammadi, M., Yousefzade, O., & Ajji, A. (2026). Polyhydroxyurethanes — sustainable materials with broad potential applications. In Ray, S. S., & Nofar, M. (eds.), Comprehensive Polymer Science (2nd ed., Vol. 4, pp. 296-342). External link

Jalali Dil, E., & Ajji, A. (2026). Polymers for Coating, Lamination, Adhesives and Sealing in Food Flexible Packaging. In Reference Module in Food Science . External link

Tselekouni, P., Mohseni-Garakani, M., Papa, S., Kim, S. Y., Avramoglu, R. K., Wertheimer, M. R., Ajji, A., Lakatos, P. L., & Rosenzweig, D. H. (2026). A 3D Alginate–Gelatin Co-Culture Model to Study Epithelial–Stromal Interactions in the Gut. Gels, 12(1), 70 (18 pages). External link

Jalali Dil, E., & Ajji, A. (2025). Improved Barrier Polymer Compositions. (Patent no. EP3999591 B1). External link

Sadeghi, A., Saffar, A., & Ajji, A. (2025). Innovative home-compostable modified starch coatings with enhanced heat sealability for paper packaging. Applied Food Research, 5(2), 101543 (12 pages). External link

Filion, R., St-Georges-Robillard, A., Chaudoir, H., Ritch, S., Ndongo, M., Ying Chua, X., Laurent, E., Mes-Masson, A.-M., Ajji, A., & Gervais, T. (2025). Mass fabrication of PDMS microfluidic devices by injection molding and applications in sensitive 3D spheroid and explant culture. Scientific Reports, 15(1), 33218 (13 pages). External link

Talebpour, P., Mighri, F., Ajji, A., Heuzey, M.-C., & Virgilio, N. (2025). Tailoring the Morphology and Orientation in Immiscible Binary Polymer Blends during Melt-Electrospinning. ACS Applied Polymer Materials, 13 pages. External link

Filion, R., St-Georges-Robillard, A., Chaudoir, H., Ritch, S., Mes-Masson, A.-M., Ajji, A., & Gervais, T. (2025). Dataset for the publication "Mass fabrication of PDMS microfluidic devices by injection molding and applications in sensitive 3D spheroid and explant" [Dataset]. External link

Sadeghi, A., Abavisani, F., Saffar, A., & Ajji, A. (2025). Improving paper-based packaging with home compostable modified starch coatings: a focus on heat seal optimization. Journal of Environmental Management, 386, 125639 (11 pages). Available

Zhuang, Y., Nguyen, T. D., Sharifian, M., Dubois, J.-L., Ajji, A., & Patience, G. S. (2025). Reactive extrusion recycling of polymethyl methacrylate to methyl methacrylate and methacrylic acid. Chemical Engineering Journal, 515, 162709 (12 pages). Available

Jafari, A., Bhatt, K., Niknezhad, S. V., Ajji, A., Griffith, M., Andelfinger, G., Bencherif, S. A., & Savoji, H. (2025). Synthesis and characterization of photo-cross-linkable quince seed-based hydrogels for soft tissue engineering applications. Carbohydrate Polymers, 352, 123140 (13 pages). Available

Ajji, Z., Jafari, A., Mousavi, A., Ajji, A., Heuzey, M.-C., & Savoji, H. (2025). 3D bioprinting of thick core–shell vascularized scaffolds for potential tissue engineering applications. European Polymer Journal, 222, 10 pages. External link

Gallah, H., Mighri, F., Ajji, A., Bandyopadhyay, J., Ben Ghorbel, N. A., & Castillo-Rodriguez, J. (2024). New Flexible Electrospun PET/TiO₂ Composite Photoanode Layer for Dye-Sensitized Solar Cells, DSSCs, and Its Photovoltaic Performances. Materials Sciences and Applications, 15(11), 481-503. External link

Abourich, M., Bellamy, A., Ajji, A., & Claveau-Mallet, D. (2024). Washing machine filters to mitigate microplastics release: citizen science study to estimate microfibers capture potential and assess their social acceptability. Environmental Challenges, 16, 100984 (11 pages). Available

Alavijeh, D. K., Heli, B., & Ajji, A. (2024). Development of a sensitive colorimetric indicator for detecting beef spoilage in smart packaging. Sensors, 24(12), 3939 (16 pages). Available

Heli, B., Younes, G. R., Arguindeguy, K., & Ajji, A. (2024). Synthesis and Characterization of Antimicrobial Bacterial Cellulose Crosslinked with Branched Polyethylenimine. Carbohydrate Polymer Technologies and Applications, 7, 100457 (9 pages). Available

Jalali Dil, E., & Ajji, A. (2024). Barrier Polymer Compositions. (Patent no. US11987700 B2). External link

Ameri, M., Ajji, A., & Kessler, S. (2024). Characterization of a food‐safe colorimetric indicator based on black rice anthocyanin/PET films for visual analysis of fish spoilage. Packaging Technology & Science, 2824 (12 pages). Available

Adrar, S., & Ajji, A. (2024). Effect of blending sequence and epoxy functionalized compatibilizer on barrier and mechanical properties of PBS and PBS/PLA nanocomposite blown films. Journal of Vinyl and Additive Technology, 12 pages. Available

Jafari, A., Niknezhad, S. V., Kaviani, M., Saleh, W., Wong, N., Vliet, P. , Moraes, C., Ajji, A., Kadem, L., Azarpira, N., Andelfinger, G., & Savoji, H. (2024). Formulation and Evaluation of PVA/Gelatin/Carrageenan Inks for 3D Printing and Development of Tissue‐Engineered Heart Valves (Adv. Funct. Mater. 7/2024). Advanced Functional Materials, 34(7). External link

Zhuang, Y., Saadatkhah, N., Nguyen, T. D., De Tommaso, J., Ng, C. Y., Wang, C., Ajji, A., & Patience, G. S. (2024). Upcycling polymethyl methacrylate to methacrylic acid. Reaction Chemistry & Engineering. External link

Mousavi, A., Hedayatnia, A., van Vliet, P. P., Dartora, D. R., Wong, N., Rafatian, N., Nuyt, A. M., Moraes, C., Ajji, A., Andelfinger, G., & Savoji, H. (2024). Development of photocrosslinkable bioinks with improved electromechanical properties for 3D bioprinting of cardiac BioRings. Applied Materials Today, 36, 102035 (19 pages). External link

Jafari, A., Afarian, A.-S., Amirsadeghi, A., Van Vliet, P. P., Darvish, M., Watson, S., Mousavi, A., Niknezhad, V., Andelfinger, G., Reuter, S., Wertheimer, M. R., Ajji, A., & Savoji, H. (2024). Combination of 3D Printing, Plasma Polymerization, and Bioactive Coatings Towards Fabrication of Eggshell Biowaste/Polycaprolactone Composite Scaffolds for Bone Regeneration. Advanced Composites and Hybrid Materials, 7, 131 (16 pages). External link

Benbelaid, F., Seddik Bouakaz, B., Djermoune, A., Ajji, A., & Habi, A. (2024). The Effect of Zn₂(BDC)₂ Metal Organic Framework on the Miscibility and Properties of Poly(Lactic Acid)/Poly(Butylene Adipate-co-Terephthalate) Biodegradable Blends. Journal of Macromolecular Science, Part B, 64(11), 1301-1320. External link

Ameri, M., Ajji, A., & Kessler, S. (2024). Enhancing seafood freshness monitoring : integrating color change of a food-safe on-package colorimetric sensor with mathematical models, microbiological and chemical analyses. Current Research in Food Science, 9, 100934 (15 pages). Available

Filion, R., Trovalet, Y., Reyter, D., Kanani Aghkand, Z., Cerclé, C., Ajji, A., & Gervais, T. (2024, October). Mass fabrication of PDMS devices by injection molding [Abstract]. 28th International Conference on Miniaturized Systems for Chemistry and Life Sciences - Micro-Total Analysis Systems (MicroTAS 2024), Montréal, QC, Canada (2 pages). External link

Adrar, S., & Ajji, A. (2023). Interactions between PLA, organo-montmorillonite and plasticizer: Synergistic effect on the barrier and mechanical properties of PLA nanocomposites blown films. Journal of Applied Polymer Science, 54867 (16 pages). Available

Dil, E. J., Ajji, A., & Saffar, A. (2023). Polyester Materials in Biomedical Applications. In Greener, J., & Cakmak, M. (eds.), Polyester Films: Materials, Processes and Applications (pp. 306-342). External link

Wang, C., & Ajji, A. (2023). Development and application of low-density polyethylene-based multilayer film incorporating potassium permanganate and pumice for avocado preservation. Food Chemistry, 401, 134162 (8 pages). External link

Xu, Y., Ajji, A., & Heuzey, M.-C. (2023). Fast thermal responsive hydrogels consisting of electrospun fibers with highly tunable conductivity. Sensors and Actuators A: Physical, 349, 6 pages. External link

Heli, B., El-Rifai, S., Ajji, A., & Heuzey, M.-C. (2023). Characterization of heat-treated chitosan cast films and their antimicrobial activity on the growth of natural flora of pasteurized milk. International Journal of Biological Macromolecules, 232, 123446 (9 pages). External link

Mohseni Garakani, M., Cooke, M. E., Weber, M. H., Wertheimer, M. R., Ajji, A., & Rosenzweig, D. H. (2023). A 3D, Compartmental Tumor-Stromal Microenvironment Model of Patient-Derived Bone Metastasis. International Journal of Molecular Sciences, 24(1), 160 (22 pages). External link

Watson, S., Pattyn, C., Mohseni Garakani, M., Ajji, A., Reuter, S., & Wertheimer, M. R. (2023). Wetting and aging behaviors for several O2 and NH3 plasma treated nanofibrous and flat film polymer materials: A comparison. Plasma Processes and Polymers, 20(6), e2200224 (14 pages). External link

Abourich, M., Novara, L., Ajji, A., & Claveau-Mallet, D. (2023). Microfibres issues du lavage de vêtements - une initiative citoyenne de réduction à la source. Vecteur Environnement, 56, 6-6. External link

Ajji, A., Chaouki, J., Esen, O., Grmela, M., Klika, V., & Pavelka, M. (2023). On geometry of multiscale mass action law and its fluctuations. Physica D-Nonlinear Phenomena, 445, 133642 (22 pages). External link

Gallah, H., Mighri, F., Ajji, A., & Bandyopadhyay, J. (2023). Flexible PET/(PET-TiO2) core/shell nanofibrous mats as potential photoanode layer for dye-sensitized solar cells, DSSCs. Materials Chemistry and Physics, 305, 127911 (24 pages). External link

Ajji, A., Jalali Dil, E., Saffar, A., & Kanani Aghkand, Z. (2023). Heat Sealing in Packaging. External link

Jafari, A., Niknezhad, S. V., Kaviani, M., Saleh, W., Wong, N., Van Vliet, P. P., Moraes, C., Ajji, A., Kadem, L., Azarpira, N., Andelfinger, G., & Savoji, H. (2023). Formulation and Evaluation of PVA/Gelatin/Carrageenan Inks for 3D Printing and Development of Tissue-Engineered Heart Valves. Advanced Functional Materials, 18 pages. External link

Younes, G. R., & Ajji, A. (2023, May). Development of Biodegradable and Antiviral Surgical Face Masks from Poly(lactic acid) and Poly(dimethyl siloxane)-based Polyhydroxyurethanes [Abstract]. 8th Pacific Rim Conference on Rheology, Vancouver, Colombie-Britannique, Canada. External link

Ajji, A. (2023, May). Development of Various Formulations for Active Polymer Flexible Packaging [Abstract]. 38th Annual Meeting of Polymer Processing Society (PPS-38), St Gallen, Switzerland. External link

Maryam, S., & Ajji, A. (2023, May). Development of sustained controlled release of chlorine dioxide films for food active packaging applications [Abstract]. 38th Annual Meeting of Polymer Processing Society (PPS-38), St Gallen, Switzerland. External link

Kordjazi, Z., & Ajji, A. (2023). Titanium Dioxide Catalyzed Butadiene Polymer Based Oxygen Scavenging System. (Patent no. US11713388 B2). External link

Wang, C., & Ajji, A. (2022). Ethylene scavenging film based on low-density polyethylene incorporating pumice and potassium permanganate and its application to preserve avocados. LWT-Food Science and Technology, 172, 114200 (11 pages). Available

Moslehi, A., Ajji, A., Heuzey, M.-C., Rahimizadeh, A., & Lessard, L. (2022). Polylactic acid/recycled wind turbine glass fiber composites with enhanced mechanical properties and toughness. Journal of Applied Polymer Science, 139(15), e51934 (12 pages). External link

Kordjazi, Z., & Ajji, A. (2022). Development of TiO₂ photocatalyzed EC/HTPB based oxygen scavenging mats by electrospinning method for packaging applications. Food Packaging and Shelf Life, 31, 100801 (9 pages). External link

Mohseni Garakani, M., Ahangar, P., Watson, S., Nisol, B., Wertheimer, M. R., Rosenzweig, D. H., & Ajji, A. (2022). A novel 3D co-culture platform for integrating tissue interfaces for tumor growth, migration and therapeutic sensitivity: "PP-3D-S". Materials Science and Engineering C, 134, 13 pages. External link

Mohseni Garakani, M., Cooke, M. E., Wertheimer, M. R., Rosenzweig, D. H., & Ajji, A. (2022). A novel 3D in vitro tissue model for bone-metastasized breast cancer: A preclinical tool in drug discovery and testing. Plasma Processes and Polymers, 19(7), 15 pages. External link

Wang, C., & Ajji, A. (2022). Development of a novel ethylene scavenger made up of pumice and potassium permanganate and its effect on preservation quality of avocados. Journal of Food Engineering, 330, 8 pages. External link

Junior, J. C. F., Moghimian, N., Gutiérrez, G., Helal, E., Ajji, A., de Oliveira Barra, G. M., & Demarquette, N. R. (2022). Effects of an industrial graphene grade and surface finishing on water and oxygen permeability, electrical conductivity, and mechanical properties of high-density polyethylene (HDPE) multilayered cast films. Materials Today Communications, 31, 8 pages. External link

Sharafi Zamir, S., Fathi, B., Ajji, A., Robert, M., & Elkoun, S. (2022). Biodegradation of modified starch/poly lactic acid nanocomposite in soil. Polymer Degradation and Stability, 199, 9 pages. External link

Azizipour, N., Avazpour, R., Weber, M. H., Sawan, M., Ajji, A., & Rosenzweig, D. H. (2022). Uniform Tumor Spheroids on Surface-Optimized Microfluidic Biochips for Reproducible Drug Screening and Personalized Medicine. Micromachines, 13(4), 16 pages. External link

Azizipour, N., Avazpour, R., Sawan, M., Ajji, A., & Rosenzweig, D. H. (2022). Surface Optimization and Design Adaptation toward Spheroid Formation On-Chip. Sensors, 22(9), 3191 (14 pages). External link

Zamir, S. S., Fathi, B., Ajji, A., Robert, M., & Elkoun, S. (2022). Crystallinity and gas permeability of Poly (Lactic Acid)/Starch nanocrystal nanocomposite. Polymers, 14(14), 2802 (14 pages). External link

Zhuang, Y., Saadatkhah, N., Salehi Morgani, M., Xu, T., Martin, C., Patience, G. S., & Ajji, A. (2022). Experimental methods in chemical engineering: Reactive extrusion. Canadian Journal of Chemical Engineering, 101(1), 59-77. External link

Kordjazi, Z., & Ajji, A. (2022). Oxygen scavenging systems for food packaging applications: A review. Canadian Journal of Chemical Engineering, 100(12), 3444-3449. External link

Xu, Y., Ajji, A., & Heuzey, M.-C. (2022). Tunable two-step shape and dimensional changes with temperature of a PNIPAM/CNC hydrogel. Soft Matter, 18(23), 4437-4444. External link

Zamir, S. S., Fathi, B., Ajji, A., Robert, M., & Elkoun, S. (2022). Phase transition and crystallization behavior of grafted starch nanocrystals in PLA nanocomposites. Express Polymer Letters, 16(12), 1253-1266. External link

Fortin, W., Bouchet, M., Thérasse, É., Maire, M., Héon, H., Ajji, A., Soulez, G., & Lerouge, S. (2022). Negative In Vivo Results Despite Promising In Vitro Data With a Coated Compliant Electrospun Polyurethane Vascular Graft. Journal of Surgical Research, 279, 491-504. External link

Adrar, S., & Ajji, A. (2022). Effect of different type of organomontmorillonites on oxygen permeability of PLA-based nanocomposites blown films. Polymer Engineering & Science, 62(11), 3796-3808. External link

Bellamy, A., Abourich, M., Ajji, A., & Claveau-Mallet, D. (2022, March). Microplastiques, enquête sur la horde qui envahit nos milieux aquatiques : identification, quantification et réduction à la source [Presentation]. In Journée québécoise étudiante CentrEau (JQEC 2022). Unavailable

Bellamy, A., Ajji, A., Comeau, Y., & Claveau-Mallet, D. (2022, November). Identifier et quantifier pour mieux traiter les microplastiques dans l'eau, vers un suivi routier par les municipalités [Paper]. Symposium sur la gestion de l'eau, Trois-Rivières, Qc, Canada. Unavailable

Azizipour, N., Avazpour, R., Sawan, M., Rosenzweig, D. H., & Ajji, A. (2022). Uniformity of spheroids-on-a-chip by surface treatment of PDMS microfluidic platforms. Sensors & Diagnostics, 1(4), 750-764. Available

Darvish, M., & Ajji, A. (2022). Synergistic Antimicrobial Activities of Limonene with Mineral Carriers in LDPE Films for Active Packaging Application. Science Journal of Chemistry, 10(2), 32. External link

Heli, B., Ajji, A., & Heuzey, M.-C. (2022, April). Characterization and antibacterial activity of heat-treated chitosan cast film and its application on extending shelf-life of milk [Abstract]. 37th Annual Meeting of Polymer Processing Society (PPS-37), Fukuoka, Japan (1 page). External link

Ajji, A. (2022, April). Future Polymer Flexible Packaging: Sustainable and Functional [Abstract]. 37th Annual Meeting of Polymer Processing Society (PPS-37), Fukuoka, Japan (1 page). External link

Roso, M., Cerclé, C., Patience, G. S., & Ajji, A. (2021). Experimental Methods in Chemical Engineering: Barrier properties. Canadian Journal of Chemical Engineering, 99(5), 1068-1081. External link

Kordjazi, Z., & Ajji, A. (2021). Development of TiO₂ catalyzed HTPB based oxygen scavenging films for food packaging applications. Food Control, 121, 107639 (6 pages). External link

Bouchet, M., Ajji, A., & Lerouge, S. (2021). Determination of the Adhesion Between Electrospun Mats through Peel tests. Fibers and Polymers, 22(5), 1266-1273. External link

Kanani Aghkand, Z., Saffar, A., & Ajji, A. (2021). Effect of Back-layer on seal performance of multilayer polyethylene-based sealant films. Journal of Applied Polymer Science, 138(31), 12 pages. External link

Salehi Morgani, M., Jalali Dil, E., & Ajji, A. (2021). Effect of processing condition and antioxidants on visual properties of multilayer post-consumer recycled high density polyethylene films. Waste Management, 126, 239-246. External link

Mohammadi, R. S., Zolali, A. M., Tabatabaei, S. H., & Ajji, A. (2021). Interfacial localization of organoclay enhances the peelability of polyethylene/polybutene-1/organoclay nanocomposite films. Composites Part B: Engineering, 218, 9 pages. External link

Wang, L., Jalali Dil, E., & Ajji, A. (2021). Effect of Uniaxial Stretching on Molecular Orientation, Crystallinity and Oxygen Permeability of Ethylene Vinyl Alcohol. International Polymer Processing, 36(3), 314-321. External link

Heli, B., & Ajji, A. (2021, July). The application of the plasmonic nanopaper in the optical-based sensing approaches [Paper]. 21st IEEE International Conference on Nanotechnology (NANO 2021), Montreal, Québec, Canada (1 page). External link

Darvish, M., & Ajji, A. (2021). Effect of Polyethylene Film Thickness on the Antimicrobial Activity of Embedded Zinc Oxide Nanoparticles. ACS Omega, 6(40), 26201-26209. External link

Abdoltajedini, F., Hadjizadeh, A., & Ajji, A. (2021). Fabrication and characterization of polymeric nano/micro fibers containing silver nanoparticles for biomedical applications. International Journal of Polymeric Materials and Polymeric Biomaterials, 72(2), 144-161. External link

Kanani Aghkand, Z., & Ajji, A. (2021). Squeeze flow in multilayer polymeric films: Effect of material characteristics and process conditions. Journal of Applied Polymer Science, 139(13), 51852 (14 pages). External link

Rosid, S. M., Ajji, A., Hasbullah, H., Rosid, S. J. M., Ismail, A. F., & Goh, P. S. (2021). Physicochemical characteristics of polysulfone nanofiber membranes with iron oxide nanoparticles via electrospinning. Journal of Applied Polymer Science, 139(8), 10 pages. External link

Ferreira Junior, J. C., Demarquette, N. R., Ajji, A., Barra Guilherme, M. O., Moghimian, N., & Helal, E. (2021, September). The effect of industrial grade graphene on electrical conductivity, barrier and tensile properties of high-density polyethylene (hdpe) multilayered cast films [Abstract]. 36th Annual Meeting of Polymer Processing Society (PPS-36), Montréal, Québec (1 page). External link

Abdali, H., Heli, B., & Ajji, A. (2021, September). Room-Temperature, Lightweight Carbon Dioxide Sensor based on Amino-Functionalized Graphene/Polyaniline Nanofibers [Abstract]. 36th Annual Meeting of Polymer Processing Society (PPS-36), Montreal, Qc, Canada (1 page). External link

Darvish, M., & Ajji, A. (2021, September). Fabrication and characterization of antimicrobial multilayered polymeric films containing Zinc Oxide nanoparticles by the co-extrusion technique [Abstract]. 36th Annual Meeting of Polymer Processing Society (PPS-36), Montreal, Qc, Canada (1 page). External link

Jalali Dil, E., Mokrini, M., Heugna Nana, S. T., & Ajji, A. (2021, September). High Barrier Films Based on Multiphase Polymer Blends [Abstract]. 36th Annual Meeting of Polymer Processing Society (PPS-36), Montreal, Qc, Canada. External link

Kordjazi, Z., & Ajji, A. (2021, September). Development of TiO₂ catalyzed HTPB based oxygen scavenging films for food packaging applications [Abstract]. 36th Annual Meeting of Polymer Processing Society (PPS-36), Montreal, Qc, Canada (1 page). External link

Sharafi Zamir, S., Robert, M., Ajji, A., & Elkoun, S. (2021, September). Effect of starch nanocrystals on the crystallization rate and crystalline structure of PLA [Abstract]. 36th Annual Meeting of Polymer Processing Society (PPS-36), Montreal, Qc, Canada (1 page). External link

Ajji, A., & Adrar, S. (2021, September). An Investigation into the Effects of Different nanoclays on properties of PLA nanocomposites [Abstract]. 36th Annual Meeting of Polymer Processing Society (PPS-36), Montreal, Qc, Canada (1 page). External link

Heli, B., & Ajji, A. (2021, September). Versatile Optical Sensor Based-on Plasmonic Nano Cellulose [Abstract]. 36th Annual Meeting of Polymer Processing Society (PPS-36), Montreal, Qc, Canada (1 page). External link

Mohseni Garakani, M., Ajji, A., Wertheimer, M. R., Rosenzweig, D. H., Nisol, B., Watson, S., & Gauthier, M. (2021, September). An innovative 3D cell culture kit for drug screening applications: “PP-3D-S” [Abstract]. 36th Annual Meeting of Polymer Processing Society (PPS-36), Montreal, Qc, Canada (1 page). External link

Salehi Morgani, M., Jalali Dil, E., & Ajji, A. (2021, September). Recycling of high barrier multilayer flexible film containing PE, PA, and PET through interface compatibilization [Abstract]. 36th Annual Meeting of Polymer Processing Society (PPS-36), Montreal, Qc, Canada (1 page). External link

Moussavi, A., Ajji, A., & Stuart, P. R. (2021, October). Sequential decision-making for the application of a site-wide energy analysis based on the BBridge method [Poster]. 2021 Canadian Chemical Engineering Conference (CCEC 2021), virtuel. Unavailable

Azizipour, N., Avazpour, R., Rosenzweig, D. H., Sawan, M., & Ajji, A. (2020). Evolution of biochip technology : a review from lab-on-a-chip to organ-on-a-chip. Micromachines, 11(6), 599 (33 pages). Available

Gallah, H., Mighri, F., Ajji, A., & Bandyopadhyay, J. (2020). Flexible electrospun PET/TiO2 nanofibrous structures: Morphology, thermal and mechanical properties. Polymers for Advanced Technologies, 31(7), 1612-1623. External link

Ajji, A., & Heli, B. (2020). Solid Phase Immunoassay Apparatus and Method for Rapid Detection of Bacteria. (Patent Application no. US20200103404). External link

Mohammadi, R. S., Zolali, A. M., Tabatabaei, S. H., & Ajji, A. (2020). Nanoconfinement Induced Direct Formation of Form i and III Crystals inside in Situ Formed Poly(butene-1) Nanofibrils. Macromolecules, 53(4), 1346-1355. External link

Heli, B., & Ajji, A. (2020). Toward a nanopaper-based and solid phase immunoassay using FRET for the rapid detection of bacteria. Scientific Reports, 10(1), 11 pages. External link

Kordjazi, Z., & Ajji, A. (2020). Partially miscible polymer blends of ethyl cellulose and hydroxyl terminated polybutadiene. Polymer, 211, 123067 (7 pages). External link

Heli, B., Abdali, H., & Ajji, A. (2020). Electrospun nanofibrous webs for gas sensing applications. In Joshi, M. (ed.), Nanotechnology in textiles : advances and developments in polymer Nanocomposites (pp. 269-306). External link

Zhuang, Y., Saadatkhah, N., Dubois, J.-L., Ajji, A., & Patience, G. S. (2020, October). Direct conversion of PMMA to MAA in twin-screw extruder [Presentation]. In CSChe CCEC 2020, virtuel. Unavailable

Abdali, H., Heli, B., & Ajji, A. (2020, July). Lightweight, room-temperature carbon dioxide sensors based on functionalized graphene/polyaniline nanofiber nanocomposites [Presentation]. In 20th International Conference on Nanotechnology (IEEE-NANO 2020), virtuel. Unavailable

Ben Dhieb, F., Jalali Dil, E., Tabatabaei, S. H., Mighri, F., & Ajji, A. (2019). Correction: Effect of nanoclay orientation on oxygen barrier properties of LbL nanocomposite coated films (vol 9, pg 1632, 2019). RSC Advances, 9(39), 22676-22676. External link

Ben Dhieb, F., Jalali Dil, E., Tabatabaei, S. H., Mighri, F., & Ajji, A. (2019). Effect of nanoclay orientation on oxygen barrier properties of LbL nanocomposite coated films. RSC Advances, 9(3), 1632-1641. Available

Rokbani, H., Daigle, F., & Ajji, A. (2019). Long- and short-term antibacterial properties of low-density polyethylene-based films coated with zinc oxide nanoparticles for potential use in food packaging. Journal of Plastic Film and Sheeting, 35(2), 117-134. External link

Jahan, N., Mighri, F., Rodrigue, D., & Ajji, A. (2019). Effect of the inflation strategy on the piezoelectric response of cellular poly(vinylidene fluoride) ferroelectret. Journal of Applied Polymer Science, 136(20), 8 pages. External link

Jahan, N., Mighri, F., Rodrigue, D., & Ajji, A. (2019). Thermally stable cellular poly(vinylidene) ferroelectrets: Optimization of CO₂ driven inflation process. Journal of Applied Polymer Science, 136(40), 47929 (9 pages). External link

Bouchet, M., Gauthier, M., Maire, M., Ajji, A., & Lerouge, S. (2019). Towards compliant small-diameter vascular grafts: Predictive analytical model and experiments. Materials Science and Engineering: C, 100, 715-723. External link

Jalali Dil, E., Ben Dhieb, F., & Ajji, A. (2019). Modeling the effect of nanoplatelets orientation on gas permeability of polymer nanocomposites. Polymer, 168, 126-130. External link

Di Mauro, E., Camaggi, M., Vandooren, N., Bayard, C., De Angelis, J., Pezzella, A., Baloukas, B., Silverwood, R., Ajji, A., Pellerin, C., & Santato, C. (2019). Eumelanin for nature-inspired UV-absorption enhancement of plastics. Polymer International, 68(5), 984-991. External link

Gaikwad, K. K., Singh, S., & Ajji, A. (2019). Moisture absorbers for food packaging applications. Environmental Chemistry Letters, 17(2), 609-628. External link

Zamir, S. S., Frouzanmehr, M. R., Nagalakshmaiah, M., Ajji, A., Robert, M., & Elkoun, S. (2019). Chemical compatibility of lactic acid-grafted starch nanocrystals (SNCs) with polylactic acid (PLA). Polymer Bulletin, 76(7), 3481-3499. External link

Ben Dhieb, F., Tabatabaei, S. H., Mighri, F., & Ajji, A. (2019). Comparison of Crosslinking Efficiency in Dip and Roll-Deposited Coatings on Their Oxygen Barrier. ACS Omega, 4(14), 15772-15779. External link

Abdali, H., & Ajji, A. (2019). Functionalized Graphene/Polymer Nanofiber Composites and Their Functional Applications. In Khan, A., Jawaid, M., Neppolian, B., & Asiri, A. M. (eds.), Graphene Functionalization Strategies: From Synthesis to Applications (pp. 127-156). External link

Xu, Y., Ajji, A., & Heuzey, M.-C. (2019). Response behaviors and mechanical strength of thermal responsive hydrogels fabricated by electrospinning. Polymer, 183, 8 pages. External link

Abdali, H., Heli, B., & Ajji, A. (2019). Cellulose nanopaper cross-linked amino graphene/polyaniline sensors to detect CO₂ gas at room temperature. Sensors, 19(23), 10 pages. External link

Abdali, H., Heli, B., & Ajji, A. (2019). Stable and sensitive amino-functionalized graphene/polyaniline nanofiber composites for room-temperature carbon dioxide sensing. RSC Advances, 9(70), 41240-41247. External link

Gallah, H., Mighri, F., Ajji, A., & Bandyopadhyay, J. (2019, May). Flexible Electrospun PET/TiO₂ Nanofibrous Structures for Dye-Sensitized Solar Cell (DSSC) Photoanodes [Paper]. 35th Annual Meeting of Polymer Processing Society (PPS-35), Çeşme-Izmir, Turkey. External link

Dhieb, F. B., Carrillo Garcia, A., Tabatabaei, S. H., Mighri, F., & Ajji, A. (2019). Study of the Crosslinking of PVA with Glyoxal in LbL Nanocomposites. Open Journal of Polymer Chemistry, 09(04), 100-116. External link

Zhuang, Y., Saadatkhah, N., Grigg, M., Lafleur, P. G., Ajji, A., & Patience, G. S. (2019, October). Powder to Process - Challenges in Chemical Engineering [Abstract]. 69th Canadian Chemical Engineering Conference (CSChE Conferences 2019), Halifax, NS, CA. External link

Ajji, A. (2019, November). Orientation, Nanocomposites and Renwable Materials for Sustainable Packaging [Abstract]. Europe and Africa Regional Meeting of Polymer Processing Society, Pretoria, South Africa (1 page). External link

Mohammadi, S. R., & Ajji, A. (2019, May). Dispersion State in Polymer Nanocomposites and Blends and its Incidence on Films Seal Performance [Abstract]. 35th Annual Meeting of Polymer Processing Society (PPS-35), Çeşme-Izmir, Turkey (1 page). External link

Kordjazi, Z., & Ajji, A. (2019, May). Phase structure and oxygen scavenging properties of Ethylcellulose/poly Butadiene based cast films for packaging applications [Abstract]. 35th Annual Meeting of Polymer Processing Society (PPS-35), Çeşme-Izmir, Turkey (1 page). External link

Rokbani, H., Daigle, F., & Ajji, A. (2018). Combined effect of ultrasound stimulations and autoclaving on the enhancement of antibacterial activity of ZnO and SiO₂/ZnO nanoparticles. Nanomaterials, 8(3). Available

Castejon, P., Habibi, K., Saffar, A., Ajji, A., Martinez, A. B., & Arencon, D. (2018). Polypropylene-based porous membranes: Influence of polymer composition, extrusion draw ratio and uniaxial strain. Polymers, 10(1). Available

Mohebbi, A., Mighri, F., Ajji, A., & Rodrigue, D. (2018). Cellular Polymer Ferroelectret: A Review on Their Development and Their Piezoelectric Properties. Advances in Polymer Technology, 37(2), 468-483. External link

Jahan, N., Mighri, F., Rodrigue, D., & Ajji, A. (2018). Synergistic improvement of piezoelectric properties of PVDF/ CaCO3/montmorillonite hybrid nanocomposites. Applied Clay Science, 152, 93-100. External link

Mohammadi, R. S., Tabatabaei, S. H., & Ajji, A. (2018). Effect of nanoclay localization on the peel performance of PE based blend nanocomposite sealants. Applied Clay Science, 152, 113-123. External link

Rokbani, H., & Ajji, A. (2018). Rheological properties of poly(lactic acid) solutions added with metal oxide nanoparticles for electrospinning. Journal of Polymers and the Environment, 26(6), 2555-2565. External link

Adrar, S., Habi, A., Ajji, A., & Grohens, Y. (2018). Synergistic effects in epoxy functionalized graphene and modified organo-montmorillonite PLA/PBAT blends. Applied Clay Science, 157, 65-75. External link

Arkoun, M., Ardila, N., Heuzey, M.-C., & Ajji, A. (2018). Chitosan-based structures/coatings with antibacterial properties. In Handbook of antimicrobial coatings (pp. 357-389). External link

Arkoun, M., Daigle, F., Holley, R. A., Heuzey, M.-C., & Ajji, A. (2018). Chitosan-based nanofibers as bioactive meat packaging materials. Packaging Technology and Science, 31(4), 185-195. External link

Jalali Dil, E., Kim, S. C., Saffar, A., Ajji, A., Zare, R. N., Sattayapiwat, A., Esguerra, V., & Bowen, R. A. R. (2018). Surface characterization and free thyroid hormones response of chemically modified poly(ethylene terephthalate) blood collection tubes. Applied Surface Science, 442, 602-612. External link

Mohammadi, R. S., Tabatabaei, S. H., & Ajji, A. (2018). Peelable clay/PE nanocomposite seals with ultra-wide peelable heat seal temperature window. Applied Clay Science, 158, 132-142. External link

Rouabhia, M., Mighri, N., Mao, J., Park, H. J., Mighri, F., Ajji, A., & Zhang, Z. (2018). Surface treatment with amino acids of porous collagen based scaffolds to improve cell adhesion and proliferation. Canadian Journal of Chemical Engineering, 96(10), 2236-2242. External link

Ardila, N., Ajji, Z., Heuzey, M.-C., & Ajji, A. (2018). Chitosan electrospraying: Mapping of process stability and micro and nanoparticle formation. Journal of Aerosol Science, 126, 85-98. External link

Audet, E., Mighri, F., Rodrigue, D., & Ajji, A. (2018). Cellular morphology optimization of polypropylene/CaCO₃ composite films designed for piezoelectric applications. Cellular Polymers, 37(3), 103-119. External link

Kanani Aghkand, Z., Jalali Dil, E., Ajji, A., & Dubois, C. (2018). Simulation of Heat Transfer in Heat Sealing of Multilayer Polymeric Films: Effect of Process Parameters and Material Properties. Industrial & Engineering Chemistry Research, 57(43), 14571-14582. External link

Boutrouka, R., Tabatabaei, S. H., & Ajji, A. (2018). Enhancement of heat seal properties of polypropylene films by elastomer incorporation. International Polymer Processing, 33(3), 322-326. External link

Kanani Aghkand, Z., Jalali Dil, E., Ajji, A., & Dubois, C. (2018, November). Heat Transfer Simulation of The Heat-Sealing Process in Multilayer Films [Abstract]. Americas Regional Meeting of Polymer Processing Society, Boston, MA, USA (1 page). Unavailable

Xu, Y., & Ajji, A. (2018, November). Response behaviors and mechanical strength of thermal responsive hydrogels fabricated by electrospinning [Abstract]. Americas Regional Meeting of Polymer Processing Society, Boston, MA, USA. Unavailable

Kordjazi, Z., & Ajji, A. (2018). Development of oxygen scavenging films and fibrous mats for food packaging applications [Abstract]. Americas Regional Meeting of Polymer Processing Society, Boston, MA, USA. Unavailable

Jalali Dil, E., Silverwood, R., & Ajji, A. (2018, November). Seal Performance of Bioplastic Poly(lactic acid)/Poly(butylene adipate co terephthalate) Blends [Abstract]. Americas Regional Meeting of Polymer Processing Society, Boston, MA, USA. Unavailable

Ben Dhieb, F., Tabatabaei, S. H., Mighri, F., & Ajji, A. (2018, November). High oxygen barrier coatings obtained by Dipping and Doctor Blade: Impact on crosslinking efficiency and oxygen barrier at high relative humidity [Abstract]. Americas Regional Meeting of Polymer Processing Society, Boston, MA, USA. Unavailable

Ben Dhieb, F., Jalali Dil, E., & Ajji, A. (2018, May). High Barrier Nanocomposite Films for Food Packaging Applications [Abstract]. 34th Annual Meeting of Polymer Processing Society (PPS-34), Taipei, Taiwan (1 page). External link

Jahan, N., Mighri, F., Rodrigue, D., & Ajji, A. (2018, May). PVDF based hybrid nanocomposites with Enhanced piezoelectric properties [Abstract]. 34th Annual Meeting of Polymer Processing Society (PPS-34), Taipei, Taiwan (1 page). External link

Abdali, H., & Ajji, A. (2017). Preparation of electrospun nanocomposite nanofibers of polyaniline/poly(methyl methacrylate) with amino-functionalized graphene. Polymers, 9(9). Available

Arkoun, M., Daigle, F., Heuzey, M.-C., & Ajji, A. (2017). Antibacterial electrospun chitosan-based nanofibers: A bacterial membrane perforator. Food Science & Nutrition, 5(4), 865-874. Available

Arkoun, M., Daigle, F., Heuzey, M.-C., & Ajji, A. (2017). Mechanism of action of electrospun chitosan-based nanofibers against meat spoilage and pathogenic bacteria. Molecules, 22(4). Available

Wang, S., Ajji, A., Guo, S., & Xiong, C. (2017). Preparation of microporous polypropylene/titanium dioxide composite membranes with enhanced electrolyte uptake capability via melt extruding and stretching. Polymers, 9(3), 110. Available

Savoji, H., Maire, M., Lequoy, P., Liberelle, B., De Crescenzo, G., Ajji, A., Wertheimer, M. R., & Lerouge, S. (2017). Correction to “Combining electrospun fiber mats and bioactive coatings for vascular graft prostheses”. Biomacromolecules, 18(2), 647-647. External link

Ardila, N., Daigle, F., Heuzey, M.-C., & Ajji, A. (2017). Antibacterial activity of neat chitosan powder and flakes. Molecules, 22(1), 1-19. Available

Mohebbi, A., Mighri, F., Ajji, A., & Rodrigue, D. (2017). Polymer ferroelectret based on polypropylene foam: piezoelectric properties improvement using post-processing thermomechanical treatment. Journal of Applied Polymer Science, 134(10). External link

Ardila, N., Daigle, F., Heuzey, M.-C., & Ajji, A. (2017). Effect of Chitosan Physical Form on Its Antibacterial Activity Against Pathogenic Bacteria. Journal of Food Science, 82(3), 679-686. External link

Jahan, N., Mighri, F., Rodrigue, D., & Ajji, A. (2017). Enhanced electroactive β phase in three phase PVDF/CaCO₃/nanoclay composites: Effect of micro-CaCO₃ and uniaxial stretching. Journal of Applied Polymer Science, 134(24), 11 pages. External link

Mohebbi, A., Mighri, F., Ajji, A., & Rodrigue, D. (2017). Effect of Processing Conditions on the Cellular Morphology of Polypropylene Foamed Films for Piezoelectric Applications. Cellular Polymers, 36(1), 13-34. External link

Moayeri, A., & Ajji, A. (2017). High capacitance carbon nanofibers from poly(acrylonitrile) and poly(vinylpyrrolidone)-functionalized graphene by electrospinning. Journal of Nanoscience and Nanotechnology, 17(3), 1820-1829. External link

Mohebbi, A., Mighri, F., Ajji, A., & Rodrigue, D. (2017). Polymer ferroelectret based on polypropylene foam: piezoelectric properties prediction using dynamic mechanical analysis. Polymers for Advanced Technologies, 28(4), 476-483. External link

Tighzert, W., Habi, A., Ajji, A., Sadoun, T., & Daoud, F. B.-O. (2017). Fabrication and characterization of nanofibers based on poly(lactic acid)/chitosan blends by electrospinning and their functionalization with phospholipase A1. Fibers and Polymers, 18(3), 514-524. External link

Adrar, S., Habi, A., Ajji, A., & Grohens, Y. (2017). Combined effect of epoxy functionalized graphene and organomontmorillonites on the morphology, rheological and thermal properties of poly (butylenes adipate-co-terephtalate) with or without a compatibilizer. Applied Clay Science, 146, 306-315. External link

Najarzadeh, Z., & Ajji, A. (2017). Role of molecular architecture in interfacial self-adhesion of polyethylene films. Journal of Plastic Film & Sheeting, 33(3), 235-261. External link

Tabasi, R. Y., & Ajji, A. (2017). Tailoring heat-seal properties of biodegradable polymers through melt blending. International Polymer Processing, 32(5), 606-613. External link

Bourg, V., Tsou, A., & Ajji, A. (2017, May). Orientation of poly(ethylene terephthalate) in incompatible blends with an elastomer: Influence of functionalization [Paper]. 75th Annual Technical Conference and Exhibition of the Society of Plastics Engineers (SPE ANTEC 2017), Anaheim, CA. Unavailable

Shahverdi-Shahraki, K., Ajji, A., Carreau, P., Ghosh, T., & Mahajan, K. (2017). PET nanocomposite materials and containers prepared therefrom. (Patent no. US9676926). External link

Savoji, H., Boespflug, G., Maire, M., Ajji, A., Lerouge, S., & Wertheimer, M. R. (2017, July). Plasma Processes for Innovative Vascular Prostheses Combining 3D Electrospun Nanofiber Matrices and Bioactive Coatings [Paper]. 23rd International Symposium on Plasma Chemistry (ISPC 2017), Montréal, QC, Canada. External link

Mohebbi, A., Rodrigue, D., Mighri, F., & Ajji, A. (2017, December). Development and Characterization of Piezoelectric PP-Cellular Films [Abstract]. 33rd Annual Meeting of Polymer Processing Society (PPS-33), Cancun, Mexico (1 page). External link

Ajji, A. (2017, December). Films with Functional Properties for Packaging [Abstract]. 33rd Annual Meeting of Polymer Processing Society (PPS-33), Cancun, Mexico (1 page). External link

Ajji, A., Mahajan, K., Shahverdi-Shahraki, K., Carreau, P., & Tamal, G. (2017). Materiais Nanocompósitos De Pet E Recipientes Preparados a Partir Dos Mesmos. (Patent Application no. BR112015022966 A2). External link

Savoji, H., Maire, M., Lequoy, P., Liberelle, B., De Crescenzo, G., Ajji, A., Wertheimer, M. R., & Lerouge, S. (2016). Combining electrospun fiber mats and bioactive coatings for vascular graft prostheses. Biomacromolecules, 18(1), 303-310. External link

Haddad, T., Noël, S., Liberelle, B., El Ayoubi, R., Ajji, A., & De Crescenzo, G. (2016). Fabrication and surface modification of poly lactic acid (PLA) scaffolds with epidermal growth factor for neural tissue engineering. Biomatter, 6(1). Available

Hadjizadeh, A., Savoji, H., & Ajji, A. (2016). A Facile Approach for the Mass Production of Submicro/Micro Poly (Lactic Acid) Fibrous Mats and Their Cytotoxicity Test towards Neural Stem Cells. BioMed Research International, 2016, 1-12. Available

Heli, B., Morales-Narvaez, E., Golmohammadi, H., Ajji, A., & Merkoçi, A. (2016). Modulation of population density and size of silver nanoparticles embedded in bacterial cellulose via ammonia exposure: visual detection of volatile compounds in a piece of plasmonic nanopaper. Nanoscale, 8(15), 7984-7991. External link

Moayeri, A., & Ajji, A. (2016). Core-Shell Structured Graphene Filled Polyaniline/Poly(methyl methacrylate) Nanofibers by Coaxial Electrospinning. Nanoscience and Nanotechnology Letters, 8(2), 129-134. External link

Ardila, N., Medina, N., Arkoun, M., Heuzey, M.-C., Ajji, A., & Panchal, C. J. (2016). Chitosan-bacterial nanocellulose nanofibrous structures for potential wound dressing applications. Cellulose, 23(5), 3089-3104. External link

Saffar, A., Jalali Dil, E., Carreau, P., Ajji, A., & Kamal, M. R. (2016). Phase behavior of binary blends of PP/PP‐g‐AA: limitations of the conventional characterization techniques. Polymer International, 65(5), 508-515. External link

Savoji, H., Maire, M., Lequoy, P., Liberelle, B., De Crescenzo, G., Wertheimer, M. R., Ajji, A., & Lerouge, S. (2016, May). Chondroitin sulfate-oriented epidermal growth factor (EGF) coating for random and aligned electrospun vascular grafts [Poster]. 10th World Biomaterials Congress (WBC 2016), Montréal, Québec. Published in Frontiers in Bioengineering and Biotechnology, 4. Available

Wang, S., Xiong, C., Ajji, A., & Guo, S. (2016, October). Fabrication and characterization of PP-based microporous composite membranes with enhanced properties via uniaxial stretching [Abstract]. Asia and Australia Regional Meeting of Polymer Processing Society (PPS2016), hengdu, China (1 page). External link

Ajji, A. (2016, October). Functionality in Multilayer Films for flexible Packaging [Abstract]. Asia and Australia Regional Meeting of Polymer Processing Society (PPS2016), Chengdu, China. External link

Jahan, N., Ajji, A., Mighri, F., & Rodrigue, D. (2016, July). Development of piezoelectric properties in PVDF: Effect of particle concentration and stretching variables [Abstract]. 32nd Annual Meeting of Polymer Processing Society (PPS-32), Lyon, France (1 page). External link

Mohammadi, S. R., Tabatabaei, S. H., & Ajji, A. (2016). Polymer nanocomposite sealants for easy to open packaging: effect of surface chemistry of nanoclay [Abstract]. 32nd Annual Meeting of Polymer Processing Society (PPS-32), Lyon, France (1 page). External link

Silverwood, R., Tabatabaei, S. H., & Ajji, A. (2016, July). Development of Improved Ultra Violet Light Resistance Multilayer Films [Abstract]. 32nd Annual Meeting of Polymer Processing Society (PPS-32), Lyon, France (1 page). External link

Silverwood, R., Ballen, C. Y., Tabatabaei, S. H., & Ajji, A. (2016, July). PVOH Based Barrier Coatings: A Matter of Interface [Abstract]. 32nd Annual Meeting of Polymer Processing Society (PPS-32), Lyon, France (1 page). External link

Wang, S., Xiong, C., Guo, S., & Ajji, A. (2016, July). Hydrophilic modification of polypropylene microporous membrane via molecular migration and self-assembly of DMDBS under elongational flow [Abstract]. 32nd Annual Meeting of Polymer Processing Society (PPS-32), Lyon, France (1 page). External link

Bourg, V., Saffar, A., & Ajji, A. (2016, July). Influence of a dispersed elastomeric phase on the orientation of hot-drawn Poly(ethylene Terephthalate) [Abstract]. 32nd Annual Meeting of Polymer Processing Society (PPS-32), Lyon, France (1 page). External link

Mighri, N., Mao, J., Mighri, F., Ajji, A., & Rouabhia, M. (2015). Chitosan-Coated Collagen Membranes Promote Chondrocyte Adhesion, Growth, and Interleukin-6 Secretion. Materials, 8(11), 7673-7689. Available

Shahverdi-Shahraki, K., Ghosh, T., Mahajan, K., Ajji, A., & Carreau, P. (2015). Polyethylene terephthalate/calcined kaolin composites: Effect of uniaxial stretching on the properties. Polymer Engineering and Science, 55(8), 1767-1775. External link

Shahverdi-Shahraki, K., Ghosh, T., Mahajan, K., Ajji, A., & Carreau, P. (2015). Effect of dry grinding on chemically modified kaolin. Applied Clay Science, 105-106, 100-106. External link

Savoji, H., Lerouge, S., Ajji, A., & Wertheimer, M. R. (2015). Plasma-etching for controlled modification of structural and mechanical properties of electrospun PET scaffolds. Plasma Processes and Polymers, 12(4), 314-327. External link

Patel, J. D., Mighri, F., Ajji, A., & Chaudhuri, T. K. (2015). Development of CdS nanostructures by thermal decomposition of aminocaproic acid-mixed Cd-thiourea complex precursor: Structural, optical and photocatalytic characterization. Journal of Nanoscience and Nanotechnology, 15(4), 2733-2741. External link

Mohammdi, S. R., Ajji, A., & Tabatabaei, S. H. (2014, June). Peel/seal properties of poly(ethylene methyl acrylate)/polybutene-1 blend films [Paper]. 30th International Conference of the Polymer Processing Society (PPS-30), Cleveland, Ohio, USA (4 pages). External link

Moayeri, A., & Ajji, A. (2015). Fabrication of polyaniline/poly(ethylene oxide)/non-covalently functionalized graphene nanofibers via electrospinning. Synthetic Metals, 200, 7-15. External link

Kolahchi, A. R., Ajji, A., & Carreau, P. (2014, June). Improvement of PET surface hydrophilicity and roughness through blending [Paper]. 30th International Conference of the Polymer Processing Society (PPS-30), Cleveland, Ohio, USA (4 pages). External link

Fereydoon, M., Tabatabaei, S. H., & Ajji, A. (2015). Properties of co-extruded nanoclay-filled aliphatic nylon (PA6)/linear low-density polyethylene and aromatic nylon (MXD6)/linear low-density polyethylene multilayer films. Journal of Plastic Film & Sheeting, 31(1), 45-77. External link

Mohebbi, A., Mighri, F., Ajji, A., & Rodrigue, D. (2015). Current issues and challenges in polypropylene foaming: A review. Cellular Polymers, 34(6), 299-337. External link

Abdali, H., & Ajji, A. (2015). Development of antibacterial structures and films using clove bud powder. Industrial Crops and Products, 72, 214-219. External link

Tabasi, R. Y., Najarzadeh, Z., & Ajji, A. (2015). Development of high performance sealable films based on biodegradable/compostable blends. Industrial Crops and Products, 72, 206-213. External link

Audet, E., Mighri, F., Rodrigue, D., & Ajji, A. (2015). Effect of Biaxial Stretching Temperature and Gas Diffusion Expansion on Cellular Morphology of PP/CaCO₃ and PP/talc Cellular Films. Cellular Polymers, 34(5), 233-248. External link

Vu, T. T. D., Patel, J., Mighri, F., Do, T.-O., & Ajji, A. (2015). The effect of TiO₂ surface modification on the photovoltaic properties of hybrid bulk heterojunction solar cells based on MEH-PPV/CdS/TiO₂ active layer. Green Processing and Synthesis, 4(2), 79-90. Available

Fereydoon, M., Tabatabaei, S. H., & Ajji, A. (2015). Effect of Uniaxial Stretching on Thermal, Oxygen Barrier, and Mechanical Properties of Polyamide 6 and Poly(m-xylene adipamide) Nanocomposite Films. Polymer Engineering and Science, 55(5), 1113-1127. External link

Kolahchi, A. R., Ajji, A., & Carreau, P. (2015). Enhancing Hydrophilicity of Polyethylene Terephthalate Surface Through Melt Blending. Polymer Engineering and Science, 55(2), 349-358. External link

Wang, S., Saffar, A., Ajji, A., Wu, H., & Guo, S.-Y. (2015). Fabrication of microporous membranes from melt extruded polypropylene precursor films via stretching: Effect of annealing. Chinese Journal of Polymer Science, 33(7), 1028-1037. External link

Najarzadeh, Z., Ajji, A., & Bruchet, J. B. (2015). Interfacial self-adhesion of polyethylene blends: the role of long chain branching and extensional rheology. Rheologica Acta, 54(5), 377-389. External link

Matet, M., Heuzey, M.-C., Ajji, A., & Sarazin, P. (2015). Plasticized chitosan/polyolefin films produced by extrusion. Carbohydrate Polymers, 117, 177-184. External link

Saffar, A., Tabatabaei, S. H., Carreau, P., Ajji, A., & Kamal, M. R. (2015). Rheology of PP/PP-g-MA and PP/PP-g-AA Blends and Incidence on Orientation and Crystalline Structure of Their Cast Films. Industrial & Engineering Chemistry Research, 54(43), 10787-10795. External link

Tabasi, R. Y., & Ajji, A. (2015). Selective degradation of biodegradable blends in simulated laboratory composting. Polymer Degradation and Stability, 120, 435-442. External link

Savoji, H., Maire, M., Hadjizadeh, A., Ajji, A., Lerouge, S., & Wertheimer, M. R. (2015, April). 3D Electrospun Scaffolds for Vascular Graft Applications: Fine Tuning of Properties by Plasma-Assisted Etching and Coating [Paper]. 58th Annual Technical Conference, Santa Clara, CA USA. External link

Mohammadi, S. R., Ajji, A., & Tabatabaei, S. H. (2015, September). A Quantitative Relationship Between Morphology and Peel/Seal Properties of Polyolefin Based Blends Films [Abstract]. Europa and Africa Regional Meeting of Polymer Processing Society (PPS2015), Graz, Austria (1 page). External link

Yousefzadeh Tabasi, R., & Ajji, A. (2015). Study Of Self-Adhesion and Biodegradation of PLA/PBAT Blends Films [Abstract]. 31st Annual Meeting of Polymer Processing Society (PPS-31), Jeju Island, Korea (1 page). External link

Yousefzadeh Tabasi, R., & Ajji, A. (2015, June). Seal and Hottack Properties of Poly (lactic acid) Blends [Abstract]. 30th International Conference of the Polymer Processing Society (PPS-30), Cleveland, Ohio, USA (1 page). External link

Zohrevand, A., Ajji, A., & Mighri, F. (2014). Relationship between rheological and electrical percolation in a polymer nanocomposite with semiconductor inclusions. Rheologica Acta, 53(3), 235-254. External link

Zohrevand, A., Ajji, A., & Mighri, F. (2014). Morphology and properties of highly filled iPP/TiO2 nanocomposites. Polymer Engineering and Science, 54(4), 874-886. External link

Zohrevand, A., Ajji, A., & Mighri, F. (2014). Microstructure and properties of porous nanocomposite films: Effects of composition and process parameters. Polymer International, 63(12), 2052-2060. External link

Vu, T. T. D., Mighri, F., Ajji, A., & Do, T.-O. (2014). Synthesis of titanium dioxide/cadmium sulfide nanosphere particles for photocatalyst applications. Industrial and Engineering Chemistry Research, 53(10), 3888-3897. External link

Tazi, M., Erchiqui, F., Godard, F., Kaddami, H., & Ajji, A. (2014). Characterization of rheological and thermophysical properties of HDPE-wood composite. Journal of Applied Polymer Science, 131(13). External link

Silverwood, R. J., Tabatabae, H., & Ajji, A. (2014, October). Peelable-resealable films: FTIR characterisation and peel strength [Paper]. Web Coating and Handling Conference, Myrtle Beach, SC. External link

Savoji, H., Hadjizadeh, A., Maire, M., Ajji, A., Wertheimer, M. R., & Lerouge, S. (2014). Electrospun nanofiber scaffolds and plasma polymerization: A promising combination towards complete, stable endothelial lining for vascular grafts. Macromolecular Bioscience, 14(8), 1084-1095. External link

Saffar, A., Carreau, P., Kamal, M. R., & Ajji, A. (2014). Hydrophilic modification of polypropylene microporous membranes by grafting TiO2 nanoparticles with acrylic acid groups on the surface. Polymer, 55(23), 6069-6075. External link

Saffar, A., Carreau, P., Ajji, A., & Kamal, M. R. (2014). Influence of Stretching on the Performance of Polypropylene-Based Microporous Membranes. Industrial & Engineering Chemistry Research, 53(36), 14014-14021. External link

Saffar, A., Carreau, P., Ajji, A., & Kamal, M. R. (2014). Development of polypropylene microporous hydrophilic membranes by blending with PP-g-MA and PP-g-AA. Journal of Membrane Science, 462, 50-61. External link

Saffar, A., Ajji, A., Carreau, P., & Katnal, M. R. (2014, April). Development of polypropylene microporous hydrophilic membranes by blending with acrylic acid grafted polypropylene [Paper]. 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2014), Las Vegas, NV, United states. External link

Saffar, A., Ajji, A., Carreau, P., & Kamal, M. R. (2014). The impact of new crystalline lamellae formation during annealing on the properties of polypropylene based films and membranes. Polymer, 55(14), 3156-3167. External link

Sadeghi, F., & Ajji, A. (2014). Effect of molecular structure on seal ability, flex crack and mechanical properties of linear low-density polyethylene films. Journal of Plastic Film and Sheeting, 30(1), 91-111. External link

Sadeghi, F., & Ajji, A. (2014). Application of single site catalyst metallocene polyethylenes in extruded films: Effect of molecular structure on sealability, flexural cracking and mechanical properties. Canadian Journal of Chemical Engineering, 92(7), 1181-1188. External link

Rokbani, H., & Ajji, A. (2014, April). Antimicrobial activity of PCL/ZnO electrospun nanofibers [Paper]. 72nd Annual Technical Conference of the Society of Plastics Engineers: The Plastics Conference (ANTEC 2014), Las Vegas, NV, United states. Unavailable

Patel, J. D., Mighri, F., & Ajji, A. (2014). A facile route towards the preparation of ZnSe nanocrystals. Materials Letters, 131, 366-369. External link

Patel, J., Mighri, F., Ajji, A., Tiwari, D., & Chaudhuri, T. K. (2014). Spin-coating deposition of PbS and CdS thin films for solar cell application. Applied Physics A: Materials Science and Processing, 117(4), 1791-1799. External link

Patel, J., Mighri, F., Ajji, A., & Chaudhuri, T. K. (2014). Solution processed approaches for bulk-heterojunction solar cells based on Pb and Cd chalcogenide nanocrystals. Nano Energy, 5, 36-51. External link

Patel, J., Mighri, F., Ajji, A., & Chaudhuri, T. K. (2014). Facile synthesis of CdSe nanocrystals for bulk-heterojunction solar cells. Journal of Materials Science: Materials in Electronics, 25(9), 4051-4057. External link

Najarzadeh, Z., Tabasi, R. Y., & Ajji, A. (2014). Sealability and seal characteristics of PE/EVA and PLA/PCL blends. International Polymer Processing, 29(1), 95-102. External link

Najarzadeh, Z., & Ajji, A. (2014, April). Effect of seal process parameters on final seal strength behavior for LLDPE [Paper]. 72nd Annual Technical Conference of the Society of Plastics Engineers: The Plastics Conference (ANTEC 2014), Las Vegas, NV, United states. Unavailable

Najarzadeh, Z., & Ajji, A. (2014, October). Effect of seal process parameters on final seal strength behavior for LLDPE (FlexPackCon-Science of Sealing) [Paper]. Web Coating and Handling Conference, Myrtle Beach, SC. Unavailable

Najarzadeh, Z., & Ajji, A. (2014). A novel approach toward the effect of seal process parameters on final seal strength and microstructure of LLDPE. Journal of Adhesion Science and Technology, 28(16), 1592-1609. External link

Moayeri, A., & Ajji, A. (2013, November). Preparation of graphene based nanocomposites in electrospun polyaniline/polyethylene oxide blends [Paper]. Nanoscale Science and Engineering Forum 2013 - Core Programming Area at the 2013 AIChE Annual Meeting: Global Challenges for Engineering a Sustainable Future, San Francisco, CA, United states. Unavailable

Mighri, F., Duong, V. T. T., On, D. T., & Ajji, A. (2013, July). Synthesis of capped TiO2 nanocrystals of controlled shape and their use with MEH-PPV conjugated polymer to develop nanocomposite films for photovoltaic applications [Paper]. 29th International Conference of the Polymer Processing Society (PPS 2013), Nuremberg, Germany. External link

Matet, M., Heuzey, M.-C., & Ajji, A. (2014). Morphology and antibacterial properties of plasticized chitosan/metallocene polyethylene blends. Journal of Materials Sciences, 49(15), 5427-5440. External link

Kolahchi, A. R., Carreau, P., & Ajji, A. (2014). Surface Roughening of PET Films through Blend Phase Coarsening. ACS Applied Materials & Interfaces, 6(9), 6415-6424. External link

Kolahchi, A. R., Ajji, A., & Carreau, P. (2014). Surface Morphology and Properties of Ternary Polymer Blends: Effect of the Migration of Minor Components. Journal of Physical Chemistry B, 118(23), 6316-6323. External link

Jezierski, A., Rennie, K., Zurakowski, B., Ribecco-Lutkiewicz, M., Haukenfrers, J., Ajji, A., Gruslin, A., Sikorska, M., & Bani-Yaghoub, M. (2014). Neuroprotective Effects of GDNF-expressing Human Amniotic Fluid Cells. Stem Cell Reviews and Reports, 10(2), 251-268. External link

Fereydoon, M., Tabatabaei, S. H., & Ajji, A. (2014). X-ray and Trichroic Infrared Orientation Analyses of Uniaxially Stretched PA6 and MXD6 Nanoclay Composite Films SO MACROMOLECULES VL 47 IS 7 BP 2384 EP 2395 DI 10.1021/ma402466c PD APR 8 2014 PY 2014 TC 2 ZB 0. Macromolecules, 47(7), 2384-2395. External link

Fereydoon, M., Tabatabaei, S. H., & Ajji, A. (2014). Rheological, crystal structure, barrier, and mechanical properties of PA6 and MXD6 nanocomposite films. Polymer Engineering and Science, 54(11), 2617-2631. External link

Boutrouka, R., Tabatabaei, S. H., & Ajji, A. (2014, April). Effect of molecular structure on the heat seal performance of polypropylene films [Paper]. 72nd Annual Technical Conference of the Society of Plastics Engineers: The Plastics Conference (ANTEC 2014), Las Vegas, NV, United states. External link

Binan, L., Tendey, C., De Crescenzo, G., El Ayoubi, R., Ajji, A., & Jolicoeur, M. (2014). Differentiation of neuronal stem cells into motor neurons using electrospun poly-L-lactic acid/gelatin scaffold. Biomaterials, 35(2), 664-674. External link

Binan, L., Ajji, A., De Crescenzo, G., & Jolicoeur, M. (2014). Approaches for Neural Tissue Regeneration. Stem Cell Reviews and Reports, 10(1), 44-59. External link

Abdali, H., & Ajji, A. (2014, April). Antibacterial properties of electrospun fibers of PCL/clove bud powder [Paper]. 72nd Annual Technical Conference of the Society of Plastics Engineers: The Plastics Conference (ANTEC 2014), Las Vegas, NV, United states. External link

Ajji, A. (2014). Interphase and compatibilization by addition of a compatibilizer. In Utracki, L. A., & Wilkie, C. A. (eds.), Polymer Blends Handbook (2nd ed., pp. 447-516). External link

Mohammadi, S. R., Ajji, A., & Tabatabaei, S. H. (2014, June). Peel/Seal Properties of Polybutene-1 Blends and Their Nanoclay Composite Films [Abstract]. 30th International Conference of the Polymer Processing Society (PPS-30), Cleveland, Ohio, USA (1 page). External link

Sadeghi, F., Fereydoon, M., & Ajji, A. (2013). Rheological, mechanical and barrier properties of multilayer nylon/clay nanocomposite film. Advances in Polymer Technology, 32(SUPPL.1), E53-E64. External link

Patel, J. D., Mighri, F., Ajji, A., & Chaudhuri, T. K. (2013). Fatty Acid-Assisted Synthesis of Cds Microspheres: Physicochemical Properties and Photocatalytic Activity. Materials Letters, 110, 94-97. External link

Matet, M., Heuzey, M.-C., Pollet, É., Ajji, A., & Avérous, L. (2013). Innovative thermoplastic chitosan obtained by thermo-mechanical mixing with polyol plasticizers. Carbohydrate Polymers, 95(1), 241-251. External link

Hadjizadeh, A., Ajji, A., Jolicoeur, M., Liberelle, B., & De Crescenzo, G. (2013). Effects of electrospun nanostructure versus microstructure on human aortic endothelial cell behavior. Journal of Biomedical Nanotechnology, 9(7), 1195-1209. External link

Zohrevand, A., Ajji, A., & Mighri, F. (2013, July). Microstructure and mechanical properties of isotactic polypropylene reinforced with TiO₂ nanoparticles [Paper]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. External link

Shahverdi-Shahraki, K., Ghosh, T., Mahajan, K., Carreau, P., & Ajji, A. (2013, July). Development of PET Nanocomposites Based on Kaolinite [Abstract]. 29th Annual Meeting of Polymer Processing Society (PPS-29), Nuremberg, Germany (1 page). External link

Fereydoon, M., Tabatabaei, S. H., & Ajji, A. (2013, June). Properties of Uniaxially Stretched Aromatic and Aliphatic Nylon and Nylon/Clay Nanocomposite Films [Abstract]. 29th Annual Meeting of Polymer Processing Society (PPS-29), Nuremberg, Germany (1 page). External link

Najarzadeh, Z., & Ajji, A. (2013, June). Effect of Seal Process Parameters on Final Seal Strength Behavior for LLDPE [Abstract]. 29th Annual Meeting of Polymer Processing Society (PPS-29), Nuremberg, Germany (1 page). External link

Zohrevand, A., Ajji, A., & Mighri, F. (2013, June). Development of Polymer Nanocomposite Film Based Flexible Photoelectrode for Dye-Sensitized Solar Cells [Abstract]. 29th Annual Meeting of Polymer Processing Society (PPS-29), Nuremberg, Germany (1 page). External link

Thuy Duong Vu, T., Mighri, F., Do, T.-O., & Ajji, A. (2012). Synthesis of Capped TiO₂ Nanocrystals of Controlled Shape and Their Use With Meh-Ppv to Develop Nanocomposite Films for Photovoltaic Applications. Journal of Nanoscience and Nanotechnology, 12(3), 2815-2824. External link

Tabatabaei, S. H., & Ajji, A. (2012). Crystal Structure and Orientation of Uniaxially and Biaxially Oriented Pla and Pp Nanoclay Composite Films. Journal of Applied Polymer Science, 124(6), 4854-4863. External link

Song, J., Mighri, F., Ajji, A., & Lu, C. (2012). Polyvinylidene fluoride/poly(ethylene terephthalate) conductive composites for proton exchange membrane fuel cell bipolar plates: Crystallization, structure, and through-plane electrical resistivity. Polymer Engineering and Science, 52(12), 2552-2558. External link

Silverwood, R. J., Sadeghi, F., & Ajji, A. (2012, April). Study of the kinetic of slip agent migration in polyethylene sheets [Paper]. 70th Annual Technical Conference of the Society of Plastics Engineers 2012, ANTEC 2012, Orlando, FL, United states. Unavailable

Savoji, H., Hadjizadeh, A., Maire, M., Lerouge, S., Ajji, A., & Wertheimer, M. R. (2012, June). 3D electrospun PET nano-fibrous mats with plasma-polymer coating for vascular graft applications [Paper]. 4th International Conference on Plasma Medicine (ICPM-4), Orléans, France. External link

Savoji, H., Berrahmoune, S., Macossay-Torres, J., Lerouge, S., Ajji, A., & Wertheimer, M. R. (2012, August). Structural compositional and cell-adhesion properties of 3D electrospun Biospan® nano-fibrous mats with plasma-polymer coatings [Paper]. 3rd International Conference on Nanotechnology : Fundamentals and Applications (ICNFA 2012), Montréal, Québec. Unavailable

Sadeghi, F., & Ajji, A. (2012). Structure, mechanical and barrier properties of uniaxially stretched multilayer nylon/clay nanocomposite films. International Polymer Processing, 27(5), 565-573. External link

Sadeghi, F., & Ajji, A. (2012). Rheological, Physical, and Thermal Characterization of Single-Site Catalyst Based Polyethylenes for Seal Layer Applications. Polymer Engineering and Science, 52(5), 1089-1098. External link

Rezaei Kolahchi, A., Ajji, A., & Carreau, P. (2012, April). Effect of stabilizers, molecular weight and environment on thermal stability of Polyethylene Glycol (PEG) [Paper]. 70th Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2012), Orlando, FL, United states. External link

Patel, J. D., Mighri, F., Ajji, A., & Chaudhuri, T. K. (2012). Morphology and Size Control of Lead Sulphide Nanoparticles Produced Using Methanolic Lead Acetate Trihydrate-Thiourea Complex Via Different Precipitation Techniques. Materials Chemistry and Physics, 132(2-3), 747-755. External link

Patel, J. D., Mighri, F., & Ajji, A. (2012). Aminocaproic Acid Mixed Methanolic Lead-Thiourea Complex Precursor and Its Thermal Decomposition to Star-Shaped Lead Sulfide Crystals. Materials Letters, 74, 183-186. External link

Patel, J. D., Mighri, F., & Ajji, A. (2012). Generalized Chemical Route to Develop Fatty Acid Capped Highly Dispersed Semiconducting Metal Sulphide Nanocrystals. Materials Research Bulletin, 47(8), 2016-2021. External link

Pakravan, M., Heuzey, M.-C., & Ajji, A. (2012). Determination of phase behavior of poly(ethylene oxide) and chitosan solution blends using rheometry. Macromolecules, 45(18), 7621-7633. External link

Pakravan, M., Heuzey, M.-C., & Ajji, A. (2012). Core-Shell Structured Peo-Chitosan Nanofibers by Coaxial Electrospinning. Biomacromolecules, 13(2), 412-421. External link

Najarzadeh, Z., & Ajji, A. (2012, June). Seal strength optimization for LDPE/EVA blends blown films [Paper]. 18th IAPRI World Packaging Conference, San Luis Obispo, CA, United states. Unavailable

Mohebbi-Kalhori, D., Rukhlova, M., Ajji, A., Bureau, M., & Moreno, M. J. (2012). A Novel Automated Cell-Seeding Device for Tissue Engineering of Tubular Scaffolds: Design and Functional Validation. Journal of Tissue Engineering and Regenerative Medicine, 6(9), 710-720. External link

Mezghani, K., Furquan, S., Tabatabaei, S. H., & Ajji, A. (2012). Effect of blend ratio of h-LDPE and LDPE on tear properties of blown films. International Polymer Processing, 27(3), 392-398. External link

Fereydoon, M., Tabatabaei, S. H., & Ajji, A. (2012, April). Comparative thermal and rheological study of aromatic and aliphatic polyamide nanocomposites and films [Paper]. 70th Annual Technical Conference of the Society of Plastics Engineers 2012, ANTEC 2012, Orlando, FL, United states. External link

Patel, J. D., Mighri, F., Ajji, A., & Elkoun, S. (2012). Room Temperature Synthesis of Aminocaproic Acid-Capped Lead Sulphide Nanoparticles. Materials Sciences and Applications, 03(02), 125-130. External link

Tabatabaei, S. H., Ajji, A., & Ghasemi, H. (2011). Effect of Random and Block Copolypropylenes on Structure and Properties of Uniaxially and Biaxially Oriented PP Films. International Polymer Processing, 26(1), 82-90. External link

Tabatabaei, S. H., & Ajji, A. (2011). Effect of initial crystalline morphology on properties of polypropylene cast films. Journal of Plastic Film and Sheeting, 27(3), 223-233. External link

Tabatabaei, S. H., & Ajji, A. (2011). Structure-orientation-properties relationships for polypropylene nanoclay composite films. Journal of Plastic Film and Sheeting, 27(1-2), 87-115. External link

Tabatabaei, S. H., & Ajji, A. (2011). Orientation, mechanical, and optical properties of poly (lactic acid) nanoclay composite films. Polymer Engineering and Science, 51(11), 2151-2158. External link

Silverwood, R. J., & Ajji, A. (2011, May). Development of an antibacterial film for application in the food industry [Paper]. 69th Annual Technical Conference of the Society of Plastics Engineers 2011, ANTEC 2011, Boston, MA, United states. Unavailable

Patel, J., Mighri, F., & Ajji, A. (2011). Simple non-aqueous fabrication route for oleic acid capped luminescent cadmium sulphide quantum dots at relatively low temperature. Soft nanoscience letters, 1(3), 61-65. External link

Patel, J. D., Mighri, F., & Ajji, A. (2011). Rapid synthesis of highly dispersed and stable oleic acid capped lead sulphide nanoparticles. Advanced Science Letters, 4(11/12), 3644-3648. External link

Pakravan, M., Heuzey, M.-C., & Ajji, A. (2011). A fundamental study of chitosan/PEO electrospinning. Polymer, 52(21), 4813-4824. External link

Najarzadeh, Z., & Ajji, A. (2011, May). Seal layer materials characterization in terms of crystallinity and rheology [Paper]. 69th Annual Technical Conference of the Society of Plastics Engineers 2011, ANTEC 2011, Boston, MA, United states. Unavailable

Moreno, M. J., Ajji, A., Mohebbi-Kalhori, D., Rukhlova, M., Hadjizadeh, A., & Bureau, M. (2011). Development of a compliant and cytocompatible micro-fibrous polyethylene terephthalate vascular scaffold. Journal of Biomedical Materials Research. Part B, Applied Biomaterials, 97 B(2), 201-214. External link

Hadjizadeh, A., Ajji, A., & Bureau, M. (2011). Nano/micro electro-spun polyethylene terephthalate fibrous mat preparation and characterization. Journal of the Mechanical Behavior of Biomedical Materials, 4(3), 340-351. External link

Fang, H., Mighri, F., Ajji, A., Cassagnau, P., & Elkoun, S. (2011). Flow behavior in a corotating twin-screw extruder of pure polymers and blends: Characterization by fluorescence monitoring technique. Journal of Applied Polymer Science, 120(4), 2304-2312. External link

Dimitrievska, S., Petit, A., Doillon, C. J., Epure, L., Ajji, A., Yahia, L., & Bureau, M. (2011). Effect of Sterilization on Non-woven Polyethylene Terephthalate Fiber Structures for Vascular Grafts. Macromolecular Bioscience, 11(1), 13-21. External link

Dimitrievska, S., Maire, M., Diaz-Quijada, G. A., Robitaille, L., Ajji, A., Yahia, L., Moreno, M., Merhi, Y., & Bureau, M. (2011). Low Thrombogenicity Coating of Nonwoven PET Fiber Structures for Vascular Grafts. Macromolecular Bioscience, 11(4), 493-502. External link

Tabatabaei, S. H., & Ajji, A. (2011). Applications of biaxial stretched films. In Biaxial Stretching of Film: Principles and Applications (pp. 231-239). External link

Pakravan, M., Heuzey, M.-C., & Ajji, A. (2011, May). Structural Features of Electrospun Chitosan-Based Nanofibers [Abstract]. 27th Annual Meeting of Polymer Processing Society (PPS-27), Marrakesh, Morocco (1 page). Unavailable

Hadjizadeh, A., Moreno, M., Bani, M., Bureau, M., & Ajji, A. (2011, May). Vascular and Neuronal Tissue Regeneration using Fibrous Based Scaffolds [Abstract]. 27th Annual Meeting of Polymer Processing Society (PPS-27), Marrakesh, Morocco (1 page). External link

Fereydoon, M., Sadeghi, F., Tabatabaei, S. H., & Ajji, A. (2011, May). Structure and Performance of Nanocomposites Based Multilayer Films [Abstract]. 27th Annual Meeting of Polymer Processing Society (PPS-27), Marrakesh, Morocco (1 page). External link

Tabatabaei, S. H., Carreau, P., & Ajji, A. (2010). Rheological Properties of Blends of Linear and Long-Chain Branched Polypropylenes. Polymer Engineering and Science, 50(1), 191-199. External link

Tabatabaei, S. H., Carreau, P., & Ajji, A. (2010). Cast films, microporous membranes, and method of preparation thereof. (Patent Application no. WO2010148492). External link

Stoeffler, K., Dubois, C., Ajji, A., Guo, N., Boismenu, F., & Skorobogatiy, M. A. (2010). Fabrication of all-polymeric photonic bandgap Bragg fibers using rolling of coextruded PS/PMMA multilayer films. Polymer Engineering and Science, 50(6), 1122-1127. External link

Sadeghi, F., Tabatabei, H., Carreau, P., & Ajji, A. (2010, February). Structure and properties of PP films: Effect of cast film process conditions, MDO stretching and blending with a random PP [Paper]. International Polyolefins Conference, Houston, TX, United states. Unavailable

Sadeghi, F., Tabatabaei, S. H., Ajji, A., & Carreau, P. (2010). Properties of uniaxially stretched polypropylene films: Effect of drawing temperature and random copolymer content. Canadian Journal of Chemical Engineering, 88(6), 1091-1098. External link

Mazinani, S., Ajji, A., & Dubois, C. (2010). Fundamental study of crystallization, orientation, and electrical conductivity of electrospun PET/carbon nanotube nanofibers. Journal of Polymer Science, Part B: Polymer Physics, 48(19), 2052-2064. External link

Mazinani, S., Ajji, A., & Dubois, C. (2010). Structure and properties of melt-spun PET/MWCNT nanocomposite fibers. Polymer Engineering and Science, 50(10), 1956-1968. External link

Hadjizadeh, A., Ajji, A., & Bureau, M. (2010). Preparation and characterization of NaOH treated micro-fibrous polyethylene terephthalate nonwovens for biomedical application. Journal of the Mechanical Behavior of Biomedical Materials, 3(8), 574-583. External link

Stoeffler, K., Dubois, C., Ajji, A., Guo, N., Boismenu, F., & Skorobogatiy, M. A. (2010). All-polymeric photonic bandgap polystyrene/polymethyl methacrylate Bragg fibers. SPE Plastic research online, 3 pages. External link

Pakravan Lonbani, M., Heuzey, M.-C., & Ajji, A. (2010, July). The Effect of Temperature on the Electrospinning of Chitosan/PEO Solutions [Abstract]. 26th Annual Meeting of Polymer Processing Society (PPS-26), Banff, Canada (1 page). External link

Carreau, P., Tabatabaei, S. H., & Ajji, A. (2010, July). Microporous Membranes Obtained from Polypropylene/High Density Polyethylene Multilayer Films by Stretching [Abstract]. 26th Annual Meeting of Polymer Processing Society (PPS-26), Banff, Canada (1 page). External link

Tabatabaei, S. H., Ajji, A., & Carreau, P. (2010, July). Microporous Membranes Obtained from Polypropylene/High Density Polyethylene Multilayer Films by Stretching [Abstract]. 26th Annual Meeting of Polymer Processing Society (PPS-26), Banff, Canada (1 page). External link

Tabatabaei, S. H., & Ajji, A. (2010, July). Structure and Properties of PLA Nanocomposites Films [Abstract]. 26th Annual Meeting of Polymer Processing Society (PPS-26), Banff, Canada. External link

Vu, T.-T.-D., Mighri, F., Do, T.-O., Ajji, A., & Patel, J. D. (2010, July). Aminoacid-Asisted Synthesis of TiO₂ Nanocrystals with Controllable Shape and Size: A Novel Agent for the Fabrication of MEH-PPV/TiO₂ Photovoltaic Materials [Abstract]. 26th Annual Meeting of Polymer Processing Society (PPS-26), Banff, Canada (1 page). External link

Tabatabaei, S. H., & Ajji, A. (2010, July). Structure-Properties Relationship of Polypropylene Cast Films [Abstract]. 26th Annual Meeting of Polymer Processing Society (PPS-26), Banff, Canada (1 page). External link

Hadjizadeh, A., Bureau, M., & Ajji, A. (2010, July). NaOH treated micro fibrous polyethylene terephthalate mats for biomedical application [Abstract]. 26th Annual Meeting of Polymer Processing Society (PPS-26), Banff, Canada (1 page). External link

Tabatabaei, S. H., Parent, L., Cigana, P., Ajji, A., & Carreau, P. (2009). Effect of Machine Direction Orientation Conditions On Properties of Hdpe Films. Journal of Plastic Film & Sheeting, 25(3-4), 235-249. External link

Tabatabaei, S. H., Carreau, P., & Ajji, A. (2009). Rheological and thermal properties of blends of a long-chain branched polypropylene and different linear polypropylenes. Chemical Engineering Science, 64(22), 4719-4731. External link

Tabatabaei, S. H., Carreau, P., & Ajji, A. (2009). Microporous membranes obtained from PP/HDPE multilayer films by stretching. Journal of Membrane Science, 345(1-2), 148-159. External link

Tabatabaei, S. H., Carreau, P., & Ajji, A. (2009). Structure and properties of MDO stretched polypropylene. Polymer, 50(16), 3981-3989. External link

Tabatabaei, S. H., Carreau, P., & Ajji, A. (2009). Effect of processing on the crystalline orientation, morphology, and mechanical properties of polypropylene cast films and microporous membrane formation. Polymer, 50(17), 4228-4240. External link

Sadeghi, F., Tabatabaei, S. H., Ajji, A., & Carreau, P. (2009). Effect of PVDF characteristics on extruded film morphology and porous membranes feasibility by stretching. Journal of Polymer Science. Part B: Polymer Physics, 47(12), 1219-1229. External link

Parent, L., Cigana, P., Ajji, A., & Carreau, P. (2009, June). Effect of machine direction orientation conditions on structure and properties of hdpe films [Paper]. 67th Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2009), Chicago, IL, United states. External link

Mazinani, S., Ajji, A., & Dubois, C. (2009). Morphology, structure and properties of conductive PS/CNT nanocomposite electrospun mat. Polymer, 50(14), 3329-3342. External link

Mazinani, S., Ajji, A., & Dubois, C. (2009, June). Structure and properties of melt-spun PET/MWCNT nanocomposite fibers [Paper]. 67th Annual Technical Conference of the Society of Plastics Engineers, Chicago, IL, United states. External link

Gauvreau, B., Guo, N., Schicker, K., Stoeffler, K., Boismenu, F., Ajji, A., Dubois, C., & Skorobogatiy, M. A. (2009, June). Colorful photonic band gap fiber-based textiles [Paper]. Conference on Lasers and Electro-Optics and 2009 Conference on Quantum Electronics and Laser Science Conference, Baltimore, MD, United states. External link

Fatahi, S., Ajji, A., & Lafleur, P. (2009). Correlation between different microstructural parameters and tensile modulus of various polyethylene blown films. Polymer Engineering and Science, 47(9), 1430-1440. External link

Cigana, P., Parent, L., Tabatabei, H., Sadeghi, F., Carreau, P., & Ajji, A. (2009, February). Process, structure and properties of cast and MDO stretched films of HDPE, PP and blends of random and linear PPS [Paper]. International Polyolefins Conference, Houston, Tx, USA. Unavailable

Bureau, M., Maire, M., Diaz-Quijada, G., Robitaille, L., Ajji, A., & Merhi, Y. (2009, June). Nonwoven pet fiber structures for vascular graft applications [Paper]. 67th Annual Technical Conference of the Society of Plastics Engineers, Chicago, IL, United states. External link

Sadeghi, F., & Ajji, A. (2008). Study of crystal structure of (polyvinylidene fluoride/clay) nanocomposite films: Effect of process conditions and clay type. Polymer Engineering and Science, 49(1), 200-207. External link

Fang, H., Mighri, F., & Ajji, A. (2008). Effect of poly(styrene‐co‐maleic anhydride) imidization on the miscibility and phase‐separation temperatures of poly(styrene‐co‐maleic anhydride)/poly(vinyl methyl ether) and poly(styrene‐co‐maleic anhydride)/ poly(methyl methacrylate) blends. Journal of Applied Polymer Science, 109(6), 3938-3943. External link

Trudel-Boucher, D., Ajji, A., & Denault, J. (2008, May). Experimental investigation on the consolidation of polypropylene-clay nanocomposites fibers [Paper]. SPE-ANTEC 2008, Milwaukee, WI, USA. Unavailable

Trudel-Boucher, D., Ajji, A., & Denault, J. (2008, October). Experimental investigation on the consolidation of polypropylene-clay nanocomposites [Paper]. Fiber Society 2008 Fall Meeting and Technical Conference, Boucherville, Québec, Canada. Unavailable

Tabatabaei, S. H., Carreau, P., & Ajji, A. (2008, May). Rheology and properties of blends of two linear and a long-chain branched polypropylenes [Paper]. 66th Annual Technical Conference of the Society of Plastics Engineers, Plastics Encounter at ANTEC 2008. Unavailable

Tabatabaei, S. H., Carreau, P., & Ajji, A. (2008, June). Microporous membranes obtained from polypropylene blend films by stretching [Paper]. 24th Annual Meeting of Polymer Processing Society (PPS-24), Salerno, Italy. External link

Tabatabaei, S. H., Carreau, P., & Ajji, A. (2008). Microporous membranes obtained from polypropylene blend films by stretching. Journal of Membrane Science, 325(2), 772-782. External link

Sadeghi, F., Ajji, A., & Carreau, P. (2008). Microporous Membranes Obtained From Polypropylene Blends With Superior Permeability Properties. Journal of Polymer Science. Part B: Polymer Physics, 46(2), 148-157. External link

Sadeghi, F., & Ajji, A. (2008, June). Study of structure of PVDF-nanoclay films : effect of preparation conditions and clay [Paper]. Polymer Processing International Meeting, Salerno, Italy. Unavailable

Pakravanlonbani, M., Heuzey, M.-C., & Ajji, A. (2008, October). Preparation of chitosan-based nonwoven mat using electrospinning process [Paper]. Fiber Society 2008 Fall Meeting and Technical Conference, Boucherville, Québec, Canada. Unavailable

Mazinani, S., Dubois, C., & Ajji, A. (2008, October). Production and characterization of electrospun PET/MWCNT nanocomposite nanofiber [Paper]. Fiber Society 2008 Fall Meeting and Technical Conference, Boucherville, Québec, Canada. Unavailable

Mazinani, S., Ajji, A., & Dubois, C. (2008, August). Rheological/Morphological study of PS/CNT nanocomposite electrospun fibers [Paper]. 15th International Congress on Rheology, Monterey, CA. External link

Laforgue, A., Robitaille, L., & Ajji, A. (2008, October). Strategies for the fabrication of conductive fibers using electrospinning and melt-spinning techniques [Paper]. Fiber Society 2008 Fall Meeting and Technical Conference, Boucherville, Québec, Canada. Unavailable

Gendron, R., Ajji, A., Dufour, J., Dimitrievska, S., & Bureau, M. (2008, August). Cell attachment on new fibrous pet structures for vascular grafts under controlled shear stress: experimental set-up and methodology [Paper]. 15th International Congress on Rheology, Monterey, CA. External link

Gauvreau, B., Guo, N., Schicker, K., Stoeffler, K., Boismenu, F., Ajji, A., Wingfield, R., Dubois, C., & Skorobogatiy, M. A. (2008). Color-Changing and Color-Tunable Photonic Bandgap Fiber Textiles. Optics Express, 16(20), 15677-15693. External link

Dubois, C., Skorobogatiy, M. A., Ajji, A., & Stoeffler, K. (2008, October). Fabrication of 1D photonic crystals based on hollow/solid-core all-polymer optic fibers [Paper]. 2008 Fiber Society Fall Meeting and Technical Conference, Boucherville, Québec, Canada. Unavailable

Dimitrievska, S., Petit, A., Ajji, A., Bureau, M., & Yahia, L. (2008). Biocompatibility of Novel Polymer-Apatite Nanocomposite Fibers. Journal of Biomedical Materials Research. Part A, 84A(1), 44-53. External link

Bureau, M., Moreno, M., & Ajji, A. (2008, May). Endothelial/Smooth muscle cells growth into nonwoven fiber vascular grafts [Paper]. International Congress on Biomaterials, Amsterdam, Netherlands. Unavailable

Bureau, M., Moreno, M., & Ajji, A. (2008, October). Endothelial/Smooth muscle cells growth into nonwoven fiber vascular grafts [Paper]. Fiber Society 2008 Fall Meeting and Technical Conference, Boucherville, Québec, Canada. Unavailable

Bani-Yaghoub, M., Tremblay, R. G., Ajji, A., Nzau, M., Gangaraju, S., Chitty, D., Zurakowski, B., & Sikorska, M. (2008). Neuroregenerative strategies in the brain: emerging significance of bone morphogenetic protein 7 (BMP7). Biochemistry and Cell Biology, 86(5), 361-369. External link

Ajji, A., & Zhang, X. (2008, February). PE//PP Multilayer and nanocomposite films: some process-structure-performance relationships [Paper]. SPE-Polyolefins conference, Houston, TX, USA. External link

Ajji, A., Laforgue, A., & Robitaille, L. (2008, May). Nano and micro fibers for conductive and piezoelectric applications [Paper]. Fiber Society 2008 Spring Meeting, Mulhouse, France. External link

Ajji, A. (2023, June). Nano and micro fibers for conductive applications [Paper]. Ambiance 2008, Boras, Finland. Unavailable

Ajji, A. (2008, June). Nano and micro fibers for conductive and piezoelectric applications [Paper]. Polymer Processing International Meeting, Salerno, Italy. Unavailable

Mazinani, S., Dubois, C., & Ajji, A. (2008, October). Production and characterization of electrospun PET/MWCNT nanocomposite nanofiber mat [Paper]. 2008 Fiber Society Fall Meeting and Technical Conference, Boucherville, QC, Canada. Unavailable

Mazinani, S., Dubois, C., & Ajji, A. (2008, October). Morphological and physical characterization of PET/MWCNT Melt-Spun fibers [Paper]. 2008 Fiber Society Fall Meeting and Technical Conference, Boucherville, QC, Canada. Unavailable

Pakravan, M., Heuzey, M.-C., & Ajji, A. (2008, October). Preparation of chitosan-based non-woven mat using electrospinning process [Paper]. 2008 Fiber Society Fall Meeting and Technical Conference, Boucherville, QC, Canada. Unavailable

Dubois, C., Skorobogatiy, M. A., & Ajji, A. (2008, June). Fabrication of 1D Photonic Crystals Based on Hollow All-Polymer Fibers [Abstract]. 24th Annual Meeting of Polymer Processing Society (PPS-24), Salerno, Italy. External link

Sadeghi, F., Ajji, A., & Carreau, P. (2007). Analysis of Microporous Membranes Obtained From Polypropylene Films by Stretching. Journal of Membrane Science, 292(1), 62-71. External link

Sadeghi, F., Ajji, A., & Carreau, P. (2007). Analysis of Row Nucleated Larnellar Morphology of Polypropylene Obtained From the Cast Film Process : Effect of Melt Rheology and Process Conditions. Polymer Engineering and Science, 47(7), 1170-1178. External link

Sadeghi, F., & Ajji, A. (2007, April). Various porous structures for biomedical applications [Paper]. International Symposium on Polymeric Materials for Regenerative Medicine 2007, Boucherville, Québec. Unavailable

Moreno, M., Ajji, A., & Bureau, M. (2007, June). New fibrous PET structures for vascular grafts : effect of fiber structure on endothelial and smooth muscle cell attachment and growth [Paper]. 7th International Symposium on Frontiers in Biomedical Polymers, Ghent, Belgium. External link

Moreno, M., & Ajji, A. (2007, April). New fibrous PET structures for vascular grafts : effect of fiber structure on endothelial and smooth muscle cell attachment and growth [Paper]. International Symposium on Polymeric Materials for Regenerative Medicine 2007, Boucherville, Québec. Unavailable

Maire, M., Ajji, A., Bureau, M., Robitaille, L., & Yahia, L. (2007, April). Hemocompatibility of new fibrous PET structures with and without surface modification [Paper]. International Symposium on Polymeric Materials for Regenerative Medicine 2007. External link

Lafrogue, A., Robitaille, L., Mokrini, A., & Ajji, A. (2007). Fabrication and characterization of ionic conducting nanofibers. Macromolecular Materials and Engineering, 292(12), 1229-1236. External link

Fatahi, S., Ajji, A., & Lafleur, P. (2007). Investigation on the Structure and Properties of Different Pe Blown Films. International Polymer Processing, 22(4), 334-345. External link

Fang, H., Mighri, F., & Ajji, A. (2007). Miscibility characterization of SMA/SAN and SMA/PMMA blends by differential scanning calorimetry and fluorescence techniques. Journal of Applied Polymer Science, 105(5), 2955-2962. External link

Fang, H., Mighri, F., & Ajji, A. (2007). Fluorescence quenching of phenanthrene and anthracene by maleic anhydride and n-octadecenylsuccinic anhydride in solution and in bulk polypropylene. Polymer Engineering and Science, 47(2), 192-199. External link

Dimitrievska, S., Petit, A., Ajji, A., Bureau, M., & Yahia, L. (2007, February). Biocompatibility of a novel bioactive polymer-apatite nanocomposite [Paper]. 53rd Annual Meeting of the Orthopaedic Research Society, San Diego, CA. Published in Tissue Engineering, 13(4). Unavailable

Dimitrievska, S., Ajji, A., Bureau, M., Petit, A., & Yahia, L. (2007, April). Novel bioactive polymer-apatite nanocomposite fibres and their biocompatibility [Paper]. International Symposium on Polymeric Materials for Regenerative Medicine 2007, Boucherville, Québec. External link

Bani, M., & Ajji, A. (2007, April). Repairing the injured brain with ex vivo-engineered neuroscaffolds [Paper]. International Symposium on Polymeric Materials for Regenerative Medicine 2007, Boucherville, Québec. Unavailable

Ajji, A., Denault, J., Côté, D., Bureau, M., & Trudel-Boucher, D. (2007). Polypropylene nanocomposite fibers : structure and some applications. International Polymer Processing, 22(4), 368-374. External link

Ajji, A., & Dumoulin, M. M. (2006). Very high modulus high‐density polyethylene and high‐modulus polypropylene obtained by solid‐state roll drawing. Journal of Applied Polymer Science, 102(4), 3391-3399. External link

Ajji, A., Zhang, X., & Elkoun, S. (2006). Biaxial orientation in LLDPE films: Comparison of infrared spectroscopy, X‐ray pole figures, and birefringence techniques. Polymer Engineering and Science, 46(9), 1182-1189. External link

Bobovitch, A. L., Elkoun, S., & Ajji, A. (2006). Orientation, Structure and Properties of Double-Bubble Oriented Lldpe Films. Journal of Plastic Film & Sheeting, 22(2), 133-143. External link

Bobovitch, A. L., Tkach, R., Ajji, A., Elkoun, S., Nir, Y., Unigovski, Y., & Gutman, E. M. (2006). Mechanical properties, stress‐relaxation, and orientation of double bubble biaxially oriented polyethylene films. Journal of Applied Polymer Science, 100(5), 3545-3553. External link

Sadeghi, F., Ajji, A., & Carreau, P. (2006, July). Orientation of Polypropylene Films Having Row Nucleated Lamellar Morphology [Abstract]. 22nd Annual Meeting of Polymer Processing Society (PPS-22), Yamagata, Japan (1 page). External link

Fatahi, S., Ajji, A., & Lafleur, P. (2006, July). Correlation between Different Microstructural Parameters with Tensile Modules of Various Polyethylene Blown Films [Abstract]. 22nd Annual Meeting of Polymer Processing Society (PPS-22), Yamagata, Japan (1 page). External link

Jouan, M. R., Bureau, M., Ajji, A., Huneault, M. A., & Mantovani, D. (2005). How to design a structure able to mimic the arterial wall mechanical behavior? Journal of Materials Science, 40(9-10), 2675-2677. External link

Ajji, A., Zhang, X., & Elkoun, S. (2005). Biaxial orientation in HDPE films: comparison of infrared spectroscopy, X-ray pole figures and birefringence techniques. Polymer, 46(11), 3838-3846. External link

Ajji, A., Elkoun, S., & Zhang, X. (2005). Biaxial Orientation Characterization in PE and PP Using WAXD X-Ray Pole Figures, FTIR Spectroscopy, and Birefringence. Journal of Plastic Film & Sheeting, 21(2), 115-126. External link

Zhang, X., & Ajji, A. (2005). Oriented structure of PP/LLDPE multilayer and blends films. Polymer, 46(10), 3385-3393. External link

Mohanraj, J., Chapleau, N., Ajji, A., Alan Duckett, R., & Macmillan Ward, I. (2005). Roll-drawing and die-drawing of toughened poly(ethylene terephthalate). Part 2. Fracture behaviour. Polymer, 46(6), 1967-1981. External link

Sadeghi, F., Ajji, A., & Carreau, P. (2023, May). Study of polypropylene morphology to obtain porous membranes by stretching [Paper]. Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2005), Boston, Massachusetts, USA.. External link

Ajji, A., Auger, J., Huang, J., & Kale, L. (2004). Biaxial stretching and structure of various LLDPE resins. Polymer Engineering and Science, 44(2), 252-260. External link

Ajji, A. (2004). A Technique for Online Biaxial Birefringence Measurements and Its Application. Journal of Plastic Film & Sheeting, 20(1), 31-41. External link

Zhang, X. M., Elkoun, S., Ajji, A., & Huneault, M. A. (2004). Effect of Crystalline Structure on Tear Resistance of LDPE and LLDPE-Blown Films. Journal of Plastic Film & Sheeting, 20(1), 43-53. External link

Zhang, X. M., Elkoun, S., Ajji, A., & Huneault, M. A. (2003). Oriented structure and anisotropy properties of polymer blown films: HDPE, LLDPE and LDPE. Polymer, 45(1), 217-229. External link

Chapleau, N., & Ajji, A. (2003). Micromechanical behavior of impact modified poly(ethylene terephthalate). Polymer Engineering and Science, 43(6), 1197-1205. External link

Mohanraj, J., Chapleau, N., Ajji, A., Duckett, R. A., & Ward, I. M. (2003). Production, properties and impact toughness of die‐drawn toughened polypropylenes. Polymer Engineering and Science, 43(6), 1317-1336. External link

Zhang, X., & Ajji, A. (2003). Biaxial orientation behavior of polystyrene: Orientation and properties. Journal of Applied Polymer Science, 89(2), 487-496. External link

Ajji, A., Sammut, P., & Huneault, M. A. (2003). Elongational rheology of LLDPE / LDPE blends. Journal of Applied Polymer Science, 88(14), 3070-3077. External link

Mohanraj, J., Chapleau, N., Ajji, A., Duckett, R. A., & Ward, I. M. (2003). Fracture behavior of die‐drawn toughened polypropylenes. Journal of Applied Polymer Science, 88(5), 1336-1345. External link

Ajji, A. (2003). Interphase and Compatibilization by Addition of a Compatibilizer. In Utracki, L. A. (ed.), Polymer Blends Handbook (pp. 295-338). External link

Ajji, A., & Chapleau, N. (2002). Structure and properties of impact modified polyethylene terephthalate. Journal of Materials Science, 37(18), 3893-3901. External link

Rochette, A., Bousmina, M., Lavoie, A., & Ajji, A. (2002). Effect of Surface Treatment on Mechanical Properties of Polyethylene Composite. Journal of Composite Materials, 36(8), 925-940. External link

Ajji, A., & Zhang, X. (2002). Correlations between Orientation and Some Properties of Polymer Films and Sheets. Journal of Plastic Film & Sheeting, 18(2), 105-116. External link

Cole, K. C., Ajji, A., & Pellerin, É. (2002). New Insights into the Development of Ordered Structure in Poly(ethylene terephthalate). 1. Results from External Reflection Infrared Spectroscopy. Macromolecules, 35(3), 770-784. External link

Daly, H. B., Cole, K. C., Ajji, A., Nguyen, K. T., & Sanschagrin, B. (2002, May). Molecular orientation in injection-blow-molded bottles [Paper]. ANTEC 2002. 60th SPE Annual Technical Conference, San Francisco, Ca., USA. External link

Jiang Yan, R., Ajji, A., & Shinozaki, D. M. (2001). Microstructural effects on hot drawing syndiotactic styrene P‐methyl styrene copolymer. Polymer Engineering and Science, 41(10), 1674-1682. External link

Mighri, F., Huneault, M. A., Ajji, A., Ko, G. H., & Watanabe, F. (2001). Rheology of EPR/PP blends. Journal of Applied Polymer Science, 82(9), 2113-2127. External link

Jiang Yan, R., Shinozaki, D. M., & Ajji, A. (2001). Structure and performance of impact modified and oriented sPS/SEBS blens. Polymer Engineering and Science, 41(4), 618-630. External link

Ajji, A., & Dumoulin, M. M. (2000). Rolling and Roll-Drawing of Semi-Crystalline Thermoplastics. In Solid Phase Processing of Polymers (pp. 258-295). External link

Jiang Yan, R., Ajji, A., Shinozaki, D. M., & Dumoulin, M. M. (2000). Uniaxial drawing behavior of syndiotactic polystyrene. [Presentation]. Polymer, 41(3), 1077-1086. Presented at Annual Technical Conference and Exhibition of the Society of Plastics Engineers (SPE ANTEC 1998), Brookfield, CT, USA. External link

Cole, K. C., & Ajji, A. (2000). Characterization of Orientation. In Solid Phase Processing of Polymers (pp. 33-84). External link

Matthews, R. G., Ajji, A., Dumoulin, M. M., & Prud'homme, R. E. (1999). The effects of roll drawing on the structure and properties of oriented poly(ethylene terephthalate). Polymer Engineering and Science, 39(12), 2377-2388. External link

Ajji, A., Guèvremont, J., Matthews, R. G., & Dumoulin, M. M. (1999). Measurements of Absolute Birefringence of Biaxially Oriented Films and Sheets On-Line or Off-Line. Journal of Plastic Film & Sheeting, 15(3), 256-268. External link

Jiang Yan, R., Ajji, A., & Shinozaki, D. M. (1999). Mechanical properties of uniaxially oriented syndiotactic polystyrene. Journal of Materials Science, 34(10), 2335-2344. External link

Cole, K. C., Ben Daly, H., Sanschagrin, B., Nguyen, K. T., & Ajji, A. (1999). A new approach to the characterization of molecular orientation in uniaxially and biaxially oriented samples of Poly(Ethylene Terephthalate). Polymer, 40(12), 3505-3513. External link

Ajji, A. (1999). Technique for Absolute Birefringence Measurements and Applications. Seikei-Kakou, 11(2), 115-121. External link

Ajji, A., & Legros, N. (1999). Solid-state forming of polypropylene. In Polypropylene (pp. 744-751). External link

Ajji, A., & Dumoulin, M. M. (1998). Biaxially oriented polypropylene (BOPP) processes. In Karger-Kocsis, J. (ed.), Polypropylene (pp. 60-67). External link

Ajji, A., & Cole, K. C. (1998). Orientation characterization in polypropylene. In Karger-Kocsis, J. (ed.), Polypropylene (pp. 561-568). External link

Mighri, F., Carreau, P., & Ajji, A. (1998). Influence of elastic properties on drop deformation and breakup in shear flow. Journal of Rheology, 42(6), 1477-1490. External link

Moffatt, S., Ajji, A., Lotz, B., & Brisson, J. (1998). Uniaxial deformation of nylon-6 and nylon-11: changes in orientation and crystal phase. Canadian Journal of Chemistry, 76(11), 1491-1500. External link

Ajji, A., Legros, N., & Dumoulin, M. M. (1998). High Performance Materials from Oriented Plastics. Advanced Performance Materials, 5(1-2), 117-136. External link

Cole, K. C., Ajji, A., & Pellerin, É. FT-IR specular reflection and FT-Raman study of the structure of PET [Paper]. AIP conference proceedings. External link

Cole, K. C., Ben Daly, H., Sanschagrin, B., Nguyen, K. T., & Ajji, A. (1998, April). New approach to the characterisation of molecular orientation in uniaxially and biaxially stretched samples of PET [Paper]. 56th Annual Technical Conference of the Society of Plastics Engineers (ANTEC '98), Atlanta, Georgia, USA. External link

Lévesque, D., Legros, N., & Ajji, A. (1997). Ultrasonic determination of mechanical moduli of oriented semicrystalline polymers. Polymer Engineering and Science, 37(11), 1833-1844. External link

Pearce, R., Cole, K. C., Ajji, A., & Dumoulin, M. M. (1997). Studies of post drawing relaxation phenomena in poly(ethylene terephthalate) by infrared spectroscopy. Polymer Engineering and Science, 37(11), 1795-1800. External link

Ajji, A., Cole, K. C., Dumoulin, M. M., & Macmillan Ward, I. (1997). Orientation of amorphous poly(ethylene terephthalate) by tensile drawing, roll‐drawing, and die‐drawing. Polymer Engineering and Science, 37(11), 1801-1808. External link

Legros, N., Ajji, A., & Dumoulin, M. M. (1997). Ram extrusion of high‐density polyethylene and polypropylene in solid state: Process conditions and properties. Polymer Engineering and Science, 37(11), 1845-1852. External link

Mighri, F., Carreau, P., & Ajji, A. (1997, October). Visualization of the deformation and breakup of elastic drops in elastic matrices in shear flow [Paper]. International Symposium on Polymer Blends, Alloys and Filled Systems (POLYBLENDS 1997), Boucherville, Quebec, Canada. Unavailable

Mighri, F., Ajji, A., & Carreau, P. (1997). Influence of elastic properties on drop deformation in elongational flow. Journal of Rheology, 41(5), 1183-1201. External link

Ajji, A., & Utracki, L. A. (1997). Compatibilisation of Polymer Blends. Progress in Rubber and Plastics Technology, 13(3), 153-188. External link

Cole, K. C., Guèvremont, J., Ajji, A., & Dumoulin, M. M. (1995, August). Orientation and Conformation in PET: New Information from Specular Reflection FT-IR [Paper]. 10th International Conference of Fourier Transform Spectroscopy, Budapest, Hungary. External link

Ajji, A., Guèvremont, J., Cole, K. C., & Dumoulin, M. M. (1996). Orientation and structure of drawn poly(ethylene terephthalate). Polymer, 37(16), 3707-3714. External link

Ajji, A., Dufour, J. P., Legros, N., & Dumoulin, M. M. (1996). High Performance Materials Obtained by Solid State Forming of Polymers. Journal of Reinforced Plastics and Composites, 15(7), 652-662. External link

Ajji, A., & Utracki, L. A. (1996). Interphase and compatibilization of polymer blends. Polymer Engineering and Science, 36(12), 1574-1585. External link

Mighri, F., Ajji, A., & Carreau, P. (1996). Influence of rheological properties on drop deformation in elongational flow. Journal of Engineering and Applied Science, 2, 2601-2605. Unavailable

Mekhilef, N., Ait-Kadi, A., & Ajji, A. (1995). Injection molding, mechanical properties, and morphology of a compatibilized polycarbonate blend in the presence of weld lines. Advances in Polymer Technology, 14(4), 315-326. External link

Mighri, F., Ajji, A., & Carreau, P. (1995, October). Influence of rheological properties on drop deformation in elongational flow [Paper]. SPE Regional Technical Conference on Polymer Alloys and Blends (Polyblends 1995), Boucherville, Quebec, Canada. Unavailable

Mekhilef, N., Ait-Kadi, A., & Ajji, A. (1995). Weld lines in injection-moulded immiscible blends: model predictions and experimental results. Polymer, 36(10), 2033-2042. External link

Ajji, A., Cole, K. C., Dumoulin, M. M., & Brisson, J. (1995). Amorphous orientation of poly(ethylene terephthalate) by X-ray diffraction in combination with Fourier transform infra-red spectroscopy. Polymer, 36(21), 4023-4030. External link

Ajji, A. (1995). Morphology and mechanical properties of virgin and recycled polyethylene/polyvinyl chloride blends. Polymer Engineering and Science, 35(1), 64-71. External link

Cole, K. C., Guèvremont, J., Ajji, A., & Dumoulin, M. M. (1994). Characterization of Surface Orientation in Poly(Ethylene Terephthalate) by Front-Surface Reflection Infrared Spectroscopy. Applied Spectroscopy, 48(12), 1513-1521. External link

Brahimi, B., Ait-Kadi, A., & Ajji, A. (1994). Weld lines and mechanical properties of injection molded polyethylene/polystyrene/copolymer blends. Polymer Engineering and Science, 34(15), 1202-1210. External link

Carreau, P., Bousmina, M., & Ajji, A. (1993, December). Rheological properties of blends: facts and challenges [Paper]. Third Pacific Polymer Conference (PPC-3), Gold Coast, Queensland, Australie. External link

Ajji, A., Varennes, S., Schreiber, H. P., & Duchesne, D. (1993). Flow defects in linear low density polyethylene processing: Instrumental detection and molecular weight dependence. Polymer Engineering and Science, 33(23), 1524-1531. External link

Pazur, R. J., Ajji, A., & Prud'homme, R. E. (1993). X-ray and birefringence orientation measurements on uniaxially deformed polyethylene film. Polymer, 34(19), 4004-4014. External link

Dufeu, J. B., Roy, C., Ajji, A., & Choplin, L. (1992). PVC filled with vacuum pyrolysis scrap tires‐derived carbon blacks: An investigation on rheological, mechanical, and electrical properties. Journal of Applied Polymer Science, 46(12), 2159-2167. External link

Mekhilef, N., Aït Kadi, A., & Ajji, A. (1992). Blends of modified polycarbonate and high density polyethylene. Polymer Engineering and Science, 32(13), 894-902. External link

Ajji, A., & Gignac, P. A. (1992). Rheology and morphology of some thermoplastic blends with a liquid crystalline copolyester. Polymer Engineering and Science, 32(13), 903-908. External link

Ajji, A., Brisson, J., & Qu, Y. (1992). Orientation and mechanical properties of PBT and its blends with a liquid‐crystalline copolyester. Journal of Polymer Science Part B Polymer Physics, 30(5), 505-516. External link

Ait-Kadi, A., Ajji, A., & Brahimi, B. (1992, August). Linear Rheology of Copolymer Modified Blends: Experiments and Predictions of Emulsion Models [Paper]. 11th International Congress on Rheology, Brussels, Belgium. External link

Boutin, L., Ajji, A., & Choplin, L. (1992, August). Chemorheology of thermosets used for the encapsulation of microelectronic devices . In 11th International Congress on Rheology, Brussels, Belgium. External link

Ajji, A., Ait-Kadi, A., & Rochette, A. (1992). Polyethylene-Ultra High Modulus Polyethylene Short Fibers Composites. Journal of Composite Materials, 26(1), 121-131. External link

Ajji, A., Choplin, L., & Prud'homme, R. E. (1991). Rheology of polystyrene/poly(vinyl methyl ether)blends near the phase transition. Journal of Polymer Science Part B Polymer Physics, 29(13), 1573-1578. External link

Ajji, A., & Choplin, L. (1991). Rheology and dynamics near phase separation in a polymer blend: model and scaling analysis. Macromolecules, 24(18), 5221-5223. External link

Brahimi, B., Ait-Kadi, A., Ajji, A., Jérôme, R., & Fayt, R. (1991). Rheological properties of copolymer modified polyethylene/polystyrene blends. Journal of Rheology, 35(6), 1069-1091. External link

Brahimi, B., Ait-Kadi, A., Ajji, A., & Fayt, R. (1991). Effect of diblock copolymers on dynamic mechanical properties of polyethylene/polystyrene blends. Journal of Polymer Science Part B Polymer Physics, 29(8), 945-961. External link

Ajji, A., & Renaud, M. C. (1991). Mechanical properties of oriented poly(vinyl chloride)–poly(caprolactone) blends. Journal of Applied Polymer Science, 42(2), 335-345. External link

Ajji, A. (1989). Orientation and mechanical properties of polycarbonate‐ linear low density polyethylene blends. Polymer Engineering and Science, 29(21), 1544-1550. External link

Ajji, A., Carreau, P., Grmela, M., & Schreiber, H. P. (1989). Modified Entanglement Structure: Model and Comparison with Experiment. Journal of Rheology, 33(3), 401-419. External link

Ajji, A., Choplin, L., & Prud'homme, R. E. (1988). Rheology and phase separation in polystyrene/poly(vinyl methyl ether) blends. Journal of Polymer Science Part B Polymer Physics, 26(11), 2279-2289. External link

Ajji, A., Schreiber, H. P., & Rudin, A. (1987). Rates of property change in plasticized filled PVC compounds. Journal of Applied Polymer Science, 33(7), 2493-2501. External link

Ajji, A., Carreau, P., Schreiber, H. P., & Rudin, A. (1986). Chain entanglement and viscoelastic properties of molten polymers. Journal of Polymer Science Part B Polymer Physics, 24(9), 1983-1990. External link

Ajji, A., Jérémie, G., Rudin, A., & Schreiber, H. P. (1985). Effect of aggregation states on some properties of PVC solids and melts. Journal of Applied Polymer Science, 30(4), 1695-1705. External link

Ajji, A., Schreiber, H. P., Rudin, A., & Teh, J. (1985). Solution‐induced changes in the properties of polyethylenes. Journal of Applied Polymer Science, 30(2), 731-740. External link

Editor

Ajji, A., Mighri, F., & Naguib, H. E. (eds.) (2023). Proceedings of the 36th Conference of the Polymer Processing Society (PPS36). External link

Research Director

Karimi, E. (2026). Development and Optimization of a Melt Electrospun Scaffold from a Polymer Ternary Blend for Biomedical Applications [Ph.D. thesis, Polytechnique Montréal]. Available

Kordjazi, S. (2025). Development of Electrospun Mat for Antibacterial and Antiviral Air Filtration Mask Based on Cellulose Acetate [Ph.D. thesis, Polytechnique Montréal]. Available

Ameri, M. (2025). Development of a Food-Safe Colorimetric Sensor for Monitoring Fish Spoilage Through Volatile Gases Detection [Ph.D. thesis, Polytechnique Montréal]. Available

Zhuang, Y. (2025). Extrusion Catalytic Depolymerization of PMMA [Ph.D. thesis, Polytechnique Montréal]. Available

Vatansever, E. (2025). Development of Water-Based High Barrier Coatings for Recyclable Paper Packaging Applications [Ph.D. thesis, Polytechnique Montréal]. Available

Safaei, M. (2025). Development of a Gaseous Chlorine Dioxide Sustained Controlled Release System as a Form of Active Food Packaging [Ph.D. thesis, Polytechnique Montréal]. Available

Sadeghi, A. (2024). Home Compostable Heat Sealable Coating for Paper-Based Flexible Packaging [Master's thesis, Polytechnique Montréal]. Available

Jugie, C. (2024). Development of a New Biocompatible and Conductive Electrospun Patch for Cardiac Tissue Regeneration [Master's thesis, Polytechnique Montréal]. Available

Adrar, S. (2024). Development of High Oxygen Barrier Blown Films of PLA and PBS/PLA Nanocomposites [Ph.D. thesis, Polytechnique Montréal]. Available

Khamani, S. (2023). Investigating Mechanical Recycling of Fishing Nets [Master's thesis, Polytechnique Montréal]. Available

Laquerre, J.-É. (2023). Chemical Recycling of Meta-Aramid Fibres Into Nanofiber for Particulate Blocking Firefighter Hood [Master's thesis, Polytechnique Montréal]. Available

Leroy, P. (2023). Échafaudage cellulaire en nanofibres de polymère et verre bioactif pour la guérison des plaies diabétiques [Master's thesis, Polytechnique Montréal]. Available

Kamyabmehr, A. (2023). Development of GRAS Oxygen Scavenging System for Active Film Packaging [Master's thesis, Polytechnique Montréal]. Available

Wang, C. (2022). Development of Ethylene Scavenging Systems Based on Pumice and Potassium Permanganate for Food Packaging Applications [Ph.D. thesis, Polytechnique Montréal]. Available

Mohseni Garakani, M. (2022). An Innovative Bio-Engineered 3D Interface Model for the Study of Cancer Metastasis [Ph.D. thesis, Polytechnique Montréal]. Available

Azizipour, N. (2022). Appraisal of Surface Treatment to Steady Tumor Spheroid Formation On-Chip [Ph.D. thesis, Polytechnique Montréal]. Available

Kennedy-Hoyland, C. (2021). Electrospun Cellulose Acetate and Metal Oxide Composite Membranes for Water Filtration Applications [Master's thesis, Polytechnique Montréal]. Available

Darvish, M. (2021). Development of Antimicrobial Films for Food Packaging Using Melt Compounding [Ph.D. thesis, Polytechnique Montréal]. Available

Moslehi Alaleh Goorabi, A. (2021). Recycling of Fibreglass Wind Turbine Blades Into Reinforced PLA Composite with Enhanced Mechanical Properties and Toughness [Master's thesis, Polytechnique Montréal]. Available

Guieu, P. (2021). Développement et production d'un contenant alimentaire, recyclable et compostable à base de fibres naturelles [Master's thesis, Polytechnique Montréal]. Available

Kanani Aghkand, Z. (2021). Effect of Sealant Structure and Sealing Condition on Heat Sealing Performance of Polyethylene Films [Ph.D. thesis, Polytechnique Montréal]. Available

Xu, Y. (2021). Development of Poly(N-isopropylacrylamide) Based Hydrogel Platform and its Applications [Ph.D. thesis, Polytechnique Montréal]. Available

Emami, N. (2021). Development of Alternative Bacteria Sensing Means [Master's thesis, Polytechnique Montréal]. Available

Stile, G. (2020). Controlled Drug Delivery for Cancer Treatment Using Electrospun Structure [Master's thesis, Polytechnique Montréal]. Available

Salehi Morgani, M. (2020). Enhancing the Visual and Mechanical Properties of Multilayer Films Containing PCR [Master's thesis, Polytechnique Montréal]. Available

Karimi Alavijeh, D. (2020). Development of Films/Fibrous Nanostructures with Gas and Volatiles Detection Ability [Master's thesis, Polytechnique Montréal]. Available

Kordjazi, Z. (2019). Development of Oxygen Scavenging Polymeric Systems for Food Packaging Applications [Ph.D. thesis, Polytechnique Montréal]. Available

Abdali, H. (2019). Development of Amino Functionalized Graphene Based Polymer Nanofibers for Gas Sensors [Ph.D. thesis, Polytechnique Montréal]. Available

Ben Dhieb, F. (2019). High Barrier Water-Based Polymer/Clay Nanocomposite Coating [Ph.D. thesis, Polytechnique Montréal]. Available

Wang, L. (2019). Effect of Regrind Content on PP-EVOH Sheets Properties and Effect of Orientation on Permeability of EVOH Multilayer Films [Master's thesis, Polytechnique Montréal]. Available

Mosaferi, Z. (2018). Optimization of the Rate and Level of Porosity Generation in Electrode Films for Application in Batteries [Master's thesis, École Polytechnique de Montréal]. Available

Jahan, N. (2018). Development of the Piezoelectric Properties of Poly(Vinylidene Fluoride) Based Ferroelectrics and Ferroelectrets Using Fillers and Mechanical Stretching [Ph.D. thesis, École Polytechnique de Montréal]. Available

Rokbani, H. (2018). Élaboration de nouveaux matériaux nanocomposites antibactériens à base de nanoparticules d'oxyde de zinc [Ph.D. thesis, École Polytechnique de Montréal]. Available

Mohammadi, S. R. (2017). Polyolefin/Clay Nanocomposite Peelable Sealants: Microstructure and Performance [Ph.D. thesis, École Polytechnique de Montréal]. Available

Heli, B. (2017). Bacterial Cellulose Supported Sensor for Bacteria and Gas Detection Development [Ph.D. thesis, École Polytechnique de Montréal]. Available

Arkoun, M. (2017). Élaboration de nouveaux biomatériaux antibactériens à base de chitosane par le procédé d'électrofilage [Ph.D. thesis, École Polytechnique de Montréal]. Available

Ardila Gualdron, N. H. (2017). Production of Chitosan Micro and Nanospheres for the Formulation of Antibacterial Food Packaging Materials [Ph.D. thesis, École Polytechnique de Montréal]. Available

Savoji, H. (2016). Innovative Vascular Prostheses Combining 3D Electrospun Nanofiber Matrices and Bioactive Coatings Prepared by Plasma-Polymerization [Ph.D. thesis, École Polytechnique de Montréal]. Available

Moayeri, A. (2015). Development of Graphene-Based Polymer Nanocomposites for Electrical Conductors and Supercapacitors [Ph.D. thesis, École Polytechnique de Montréal]. Available

Yousefzadeh Tabasi, R. (2015). Study of Self-Adhesion and Biodegradation of Biodegradable Polymer Films [Ph.D. thesis, École Polytechnique de Montréal]. Available

Boutrouka, R. (2014). Développement d'un film à base de polypropylène ayant des propriétés mécaniques et de scellage thermique améliorées [Master's thesis, École Polytechnique de Montréal]. Available

Abdali, H. (2014). Development of Antibacterial Structures and Films Using Ground Plants, Extracts/Essential Oils [Master's thesis, École Polytechnique de Montréal]. Available

Haddad, T. (2014). Fabrication and Surface Modification of Poly L-Lactic Acid Nanostructures for Growth Factor Immobilization and Neural Stem Cell Delivery [Master's thesis, École Polytechnique de Montréal]. Available

Saffar, A. (2014). Development of Polypropylene Microporous Hydrophilic Membranes Through Cast Extrusion and Stretching [Ph.D. thesis, École Polytechnique de Montréal]. Available

Matet, M. (2014). Préparation de films à base de chitosane par voie fondue [Ph.D. thesis, École Polytechnique de Montréal]. Available

Najarzadeh, Z. (2014). Control and Optimization of Sealing Layer in Films [Ph.D. thesis, École Polytechnique de Montréal]. Available

Shahverdi-Shahraki, K. (2014). Development of Pet/Kaolin Nanocomposites with Improved Mechanical Properties [Ph.D. thesis, École Polytechnique de Montréal]. Available

Fereydoon, M. (2014). Development of High Barrier Nylon Based Multilayer Films [Ph.D. thesis, École Polytechnique de Montréal]. Available

Rezaei Kolahchi, A. (2014). Polyethylene Terephthalate (PET) Films Surface Modification Through Blending [Ph.D. thesis, École Polytechnique de Montréal]. Available

Zohre Vand, A. (2014). Development of Polymer Nanocomposite Films and their Potential for Photovoltaic Cell Applications [Ph.D. thesis, École Polytechnique de Montréal]. Available

Binan, L. (2013). Fabrication par électrofilage d'une structure à élution de facteurs de croissance pour contrôler la différenciation de cellules souches neuronales en neurones moteurs [Master's thesis, École Polytechnique de Montréal]. Available

Valenti, M. (2012). Study of the Hemocompatibility of Non-Woven Sub-Microfibrous Structures of Polyethylene Terephthalate (PET): Effect of Sub-Microfibres Diameter and Alignment [Master's thesis, École Polytechnique de Montréal]. Available

Torres, C. P. (2012). Étude du comportement de cellules endothéliales de l'aorte cultivées sur des fibres électrofilées de PET sous conditions physiologiques de cisaillement [Master's thesis, École Polytechnique de Montréal]. Available

Pakravan Lonbani, M. (2012). Production of Chitosan-Based Non-Woven Membranes Using the Electrospinning Process [Ph.D. thesis, École Polytechnique de Montréal]. Available

Silverwood, R. (2012). Développement d'un film antibactérien ayant des propriétés de glissement pour une meilleure processabilité [Master's thesis, École Polytechnique de Montréal]. Available

Mazinani, S. (2009). Processing and characterization of conductive carbon nanotube nanocomposite nanofibers and microfibers [Ph.D. thesis, École Polytechnique de Montréal]. Available

Tabatabaei, S. H. (2009). Development of microporous membranes from PP/HDPE films through cast extrusion and stretching [Ph.D. thesis, École Polytechnique de Montréal]. Available

Dimitrievska, S. (2007). Assessment of the biocompatibility of nanostructured polymeric fibers [Master's thesis, École Polytechnique de Montréal]. Available

Fatahi, S. (2006). Correlation between different micro-structural parameters with physical/mechanical properties of polyethylene blown films [Ph.D. thesis, École Polytechnique de Montréal]. Available

Sadeghi, F. (2006). Development of microporous polypropylene by stretching [Ph.D. thesis, École Polytechnique de Montréal]. Available

Mighri, F. (1998). Influence des propriétés élastiques sur la déformation et rupture de gouttes dans une matrice en écoulement élongationnel et en cisaillement [Ph.D. thesis, École Polytechnique de Montréal]. Available

List generated on: Tue Nov 10 11:23:40 2026 EST