Monter d'un niveau |
Ababou, Y. (1996). Hétéro-épitaxie de l'InP sur le Si(111) par épitaxie en phase vapeur aux organométalliques [Thèse de doctorat, École Polytechnique de Montréal]. Non disponible
Ababou, Y., Desjardins, P., Masut, R. A., Yelon, A., & L'Espérance, G. (1996). Metalorganic vapor phase epitaxy and structural characterization of InP on Si(111). Canadian Journal of Physics, 74(1), S108-S111. Lien externe
Abadou, Y., Desjardins, P., Chennouf, A., Leonelli, R., Hetheringtin, A., Yelon, A., L'Espérance, G., & Masut, R. A. (1996). Structural and optical charact. of InP grown on Si(111) by metalorganic vapor phase epitaxy using thermal cycle growth. Journal of Applied Physics, 80(9), 499-505. Lien externe
Abou-Khalil, M., Goano, M., Champagne, A., & Maciejko, R. (1996). Capture and escape in quantum wells as scattering events in Monte Carlo simulation. IEEE Photonics Technology Letters, 8(1), 19-21. Lien externe
Afshar, S., & Allaire, C. (1996). The corrosion of refractories by molten aluminum. JOM, 48(5), 23-27. Lien externe
Afshar, S., Allaire, C., Quesnel, S., & Allahverdi, M. (1996). Corrosion des réfractaires alunimosiliceux au contact de l'aluminium liquide. AL13 : le magazine de l'aluminium, 2(2), 19-36. Non disponible
Allahverdi, M., Afshar, S., & Allaire, C. (janvier 1996). Corrosion resistance of aluminosilicate ceramics to molten Al-5% Mg alloy [Communication écrite]. Advances in refractories for the metallurgical industries II. Non disponible
Amram, M., & Brooks, G. E. (1996). Case history: Noise control in airplane manufacturing. Noise Control Engineering Journal, 44(4), 193-199. Lien externe
Antaki, R. (1996). Intégration de la gravure anisotrope du silicium dans la fabrication d'un micro-administrateur pharmaceutique [Mémoire de maîtrise, École Polytechnique de Montréal]. Non disponible
Babin, F., Paradis, P.-F., & Gagné, J.-M. (janvier 1996). Analysis of laser heating and aerodynamic trapping for containerless glass processing in reduced gravity [Communication écrite]. 34th Aerospace Sciences Meeting and Exhibit, Reno, NV, United states. Lien externe
Bailon, J.-P., & Tong, Z.-X. (mai 1996). The Plastic Wake of a Long Fatigue Crack Revisited [Communication écrite]. 6th International Fatigue Congress (FATIGUE 1996), Berlin, Germany. Non disponible
Beaudoin, M., Bensaada, A., Leonelli, R., Desjardins, P., Masut, R. A., Isnard, L., Chennouf, A., & L'Espérance, G. (1996). Self-consistent determination of the band offsets in InAsₓP₁₋ₓ/InP strained layer quantum wells and the bowing parameter of bulk InAsₓP₁₋ₓ. Physical review. B, Condensed matter, 53(4), 1990-1996. Lien externe
Beck, P. (1996). Nouveaux électrocatalyseurs à base de platine et d'oxyde de tungstène pour la réduction de l'oxygène dans l'acide phosphorique 99% à 180°C [Mémoire de maîtrise, École Polytechnique de Montréal]. Non disponible
Bertrand, L., Pottier, L., Fournier, D., & Pelzl, J. (1996). Micron scale diffusivity measurements in natural and hopg graphites. Progress in Natural Science, 6, 277-280. Non disponible
Bertrand, N., Drévillon, B., Sapieha, J.-E., & Martinu, L. (avril 1996). In situ IR ellipsometry study of the adhesion and growth of plasma deposited silica thin films on stainless steel substrates [Communication écrite]. 23rd International Conference on Metallurgical Coatings and Thin Films (ICMCTF"96), San Diego, CA, USA. Publié dans Thin solid films, 290-291. Lien externe
Binet, C. (1996). Modélisation de l'écoulement du zinc liquide dans une cuve de galvanisation d'acier [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Blais, C. (1996). Développement de méthodes pour la caractérisation d'inclusions [Mémoire de maîtrise, École Polytechnique de Montréal]. Non disponible
Blais, C., L'Espérance, G., Baril, E., & Forget, C. (août 1996). Characterization of small inclusions: SEM vs TEM, or is it even worth considering SEM [Communication écrite]. Microscopy and microanalysis 1996, Minneapolis, MN (United States). Non disponible
Blandin, J. J., Hong, B., Varloteaux, A., Suery, M., & L'Espérance, G. (1996). Effect of the nature of grain boundary regions on cavitation of a superplastically deformed aluminium alloy. ACTA Materialia, 44(6), 2317-2326. Lien externe
Boire-Lavigne, S., Gendron, S., Marchand, N. J., & Immarigeon, J. P. (octobre 1995). Modelling of Thermomechanical Fatigue Including Phase Transformations [Communication écrite]. Thermal mechanical fatigue of aircraft engine materials : papers presented at the 81st meeting of the AGARD structures and materials panel, Banff, AB, Canada. Lien externe
Borges, C. F. M., Schelz, S., Martinu, L., & Moisan, M. (1996). Adhesion of CVD diamond films on silicon substrates of different crystallographic orientations. Diamond and Related Materials, 5(12), 1402-1406. Lien externe
Borges, C. F. M., Schelz, S., St Onge, L., Moisan, M., & Martinu, L. (1996). Silicon contamination of diamond films deposited on silicon substrates in fused silica based reactors. Journal of Applied Physics, 79(6), 3290-3298. Lien externe
Bouchelouh, N., Frechette, M. F., Kamel, S., & Larocque, R. Y. (octobre 1996). Avalanche current measurements at high SF₆ pressure [Communication écrite]. Conference on Electrical Insulation and Dielectric Phenomena - CEIDP '96, Millbrae, CA, USA. Lien externe
Bouchelouh, N., Frechette, M. F., Kamel, S., & Larocque, R. Y. (juin 1996). Avalanche development on SF₆ contaminated with water vapor [Communication écrite]. Conference Record of the 1996 IEEE International Symposium on Electrical Insulation, Montréal, Québec. Lien externe
Boughaba, S., Sacher, E., & Meunier, M. (novembre 1995). CO₂ laser cleaning of hydrophilic oxidized silicon surfaces [Communication écrite]. MRS Fall Symposium, Boston, MA, USA. Lien externe
Boughaba, S., Wu, X., Sacher, E., & Meunier, M. Liquid explosive evaporative removal of submicron particles from hydrophilic oxidized silicon surfaces [Communication écrite]. Annual Meeting of the Adhesion Society. Non disponible
Brissette, M. (1996). Modélisation de la durée de vie des poches de coulée dans une aciérie [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Britel, M., Ménard, D., Ciureanu, P., Akyel, C., Gauthier, J., & Yelon, A. (août 1996). Attenuation control using the giant magnetoimpedance effect in the microwave range [Communication écrite]. Symposium on Antenna Technology and Applied Electromagnetics, Montréal, Québec. Non disponible
Bureau, M. N., El Kadi, H., Denault, J., Dickson, J. I., & Frechinet, S. (1996). Processing-structure-property relations in PS/PE blends: Compression versus injection molding. Journal of Engineering and Applied Science, 2, 2220-2224. Non disponible
Caron, M., Gagnon, G., Fortin, V., Currie, J. F., Ouellet, L., Tremblay, Y., Biberger, M., & Reynolds, R. (1996). Calculation of a Al-Ti-O-N quaternary isotherm diagram for the prediction of stable phases in TiN/Al alloy contact metallization. Journal of Applied Physics, 79(8), 4468-4470. Lien externe
Caron, M., Gagnon, G., Gauvin, R., Hovington, P., Drouin, D., Currie, J. F., Tremblay, Y., Ouellet, L., Bigerger, M., & Wong, F. (juin 1996). An iterative procedure based on Monte Carlo simulation to determine the thickness and composition of VLSI metallization [Communication écrite]. 13th International VLSI Multilevel Interconnection (V-MIC) Conference, Santa Clara, CA, USA. Non disponible
Chaari, O., Ferracci, P., & Meunier, M. (septembre 1996). Wavelets and HTA network model exploitation [Communication écrite]. ElectrIMACS, Saint-Nazaire, France. Non disponible
Champagne, A., Maciejko, R., & Makino, T. (1996). Enhanced carrier injection efficiency from lateral current injection in multiple-quantum-well DFB lasers. IEEE Photonics Technology Letters, 8(6), 749-757. Lien externe
Chen, J., Maciejko, R., & Makino, T. (1996). Dynamic properties of push-pull DFB semiconductor lasers. IEEE Journal of Quantum Electronics, 32(12), 2156-2165. Lien externe
Chen, J., Maciejko, R., & Makino, T. (1996). High resonance frequency of push-pull distributed feedback lasers. Journal of Applied Physics, 79(12), 8914-8916. Lien externe
Chen, J., Maciejko, R., & Makino, T. (novembre 1996). High side mode suppression in gain-coupled DFB lasers [Communication écrite]. 9th Annual Meeting IEEE Lasers and Electro-Optics Society (LEOS'96), Boston, MA, USA. Lien externe
Chen, J., Maciejko, R., & Makino, T. (juin 1996). Mode proximity and frequency response of push-pull DFB lasers [Communication écrite]. CLEO '96. Summaries of Papers Presented at the Conference on Lasers and Electro-Optics. Vol.9. 1996 Technical Digest Series. Conference Edition, Anaheim, CA, USA. Lien externe
Cherif, K., Gueroult, B., & Rigaud, M. (1996). Wear behaviour of alumina toughened zirconia materials. Wear, 199(1), 113-121. Lien externe
Ciureanu, P., Akyel, C., Britel, M., Gauthier, J., Yelon, A., Rudkowski, P., Rudkowska, G., & Strom-Olsen, J. O. (1996). Rf and uhf giant magnetoimpedance effects in soft magnetic fibers and wires. IEEE Transactions on Magnetics, 32(5, pt. 2), 4678-4680. Lien externe
Ciureanu, P., Rudkowski, P., Britel, M. R., Ménard, D., Ström-Olsen, J. O., & Yelon, A. (mai 1997). Giant Magnetoimpedance in Rapidly Solidified Nanocrystalline NiFe Fibers . Dans International Symposium on Metastable, Mechanically Alloyed and Nanocrystalline Materials (ISMANAM 1996), Rome, Italy. Lien externe
Ciureanu, P., Rudkowski, P., Rudkowska, G., Ménard, D., Britel, M., Currie, J. F., Strom-Olsen, J. O., & Yelon, A. (novembre 1995). Giant magnetoimpedance effect in soft and ultrasoft magnetic fibers [Communication écrite]. 40th annual conference on magnetism and magnetic materials, Philadelphia, Pennsylvania. Publié dans Journal of Applied Physics, 79(8). Lien externe
Ciureanu, P., Rudkowski, P., Rudkowska, G., Ménard, D., Currie, J. F., Strom-Olsen, J. O., & Yelon, A. (1996). Magnetoimpedance effect in rapidly solidified soft magnetic fibers. Journal of Magnetism and Magnetic Materials, 157-158, 432-433. Lien externe
Cléton, F., Sieber, B., Bensaada, A., Masut, R. A., Bonard, J. M., & Ganière, J. D. (1996). Transmission electron microscopy and cathodoluminescence of tensile‐strained GaₓIn₁₋ₓP/InP heterostructures. II. On the origin of luminescence heterogeneities in tensile stress relaxed GaₓIn₁₋ₓP/InP heterostructures. Journal of Applied Physics, 80(2), 837-845. Lien externe
Cléton, F., Sieber, B., Lefebvre, A., Bensaada, A., Masut, R. A., Bonard, J. M., Ganière, J. D., & Ambri, M. (1996). Transmission electron-microscopy and cathodoluminescence of tensile-strained GaₓIn₁₋ₓP/InP heterostructures . 1. Spatial variations of the tensile-stress relaxation. Journal of Applied Physics, 80(2), 827-836. Lien externe
Cléton, F., Sieber, B., Masut, R. A., Isnard, L., Bonard, J. M., & Ganiere, J. D. (1996). Photon recycling as the dominant process of luminescence generation in an electron-beam excited n-InP epilayer grown on an n⁺-InP substrate. Semiconductor Science and Technology, 11(5), 726-734. Lien externe
Cliche, L., Roorda, S., Kajrys, G. E., & Masut, R. A. (1996). A comparison of annealing kinetics in crystalline and amorphous InP. Journal of Applied Physics, 79(4), 2142-2144. Lien externe
Cournoyer, A., & Bertrand, L. (1996). Photothermal spectrometry of thermodynamical properties in the vicinity of the glass-transition of polymers. Progress in Natural Science, 6, 265-268. Non disponible
Dai, J., Marchand, N. J., & Hongoh, M. (novembre 1994). Thermal mechanical fatigue crack growth in titanium alloys: Experiments and modelling [Communication écrite]. 2nd Symposium on Thermomechanical Fatigue Behavior of Materials, Phoenix, AZ (United States). Lien externe
Daxhelet, X. (1996). Etude des interféromètres tout-fibre : application à la stabilisation en fréquence des lasers à semi-conducteurs [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Daxhelet, X., Lacroix, S., & Gonthier, F. (janvier 1996). Coupleurs 3x3 tout-fibre [Communication écrite]. 64e congrès de l'ACFAS, Montréal, Québec. Non disponible
Decterov, S., & Pelton, A. (1996). Critical evaluation and optimization of the thermodynamic properties and phase diagrams of the CrO-Cr₂O₃, CrO-Cr₂O₃-Al₂O₃, and CrO-Cr₂O₃-CaO systems. Journal of Phase Equilibria, 17(6), 476-487. Lien externe
Decterov, S., & Pelton, A. (1996). Critical evaluation and optimization of the thermodynamic properties and phase diagrams of the CrO-Cr₂O₃-SiO₂ and CrO-Cr₂O₃-SiO₂-Al₂O₃ systems. Journal of Phase Equilibria, 17(6), 488-94. Lien externe
Decterov, S., & Pelton, A. Thermodynamic calculation of gas/slag/refractory equilibria in coal gasification [Communication écrite]. Corrosion of materials by molten glass. Non disponible
Desjardins, P. (1996). Caractérisation et modélisation de la croissance épitaxiale et de la relaxation des contraintes dans les hétérostructures semi-conductrices [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Desjardins, P., & Greene, J. E. (1996). Step-flow epitaxial growth on two-domain surfaces. Journal of Applied Physics, 79(3), 1423-1434. Lien externe
Desjardins, P., Beaudoin, M., Leonelli, R., L'Espérance, G., & Masut, R. A. (1996). Structural and optical properties of strain-relaxed InAsP/InP heterostructures grown by metalorganic vapor phase epitaxy on InP(001) using tertiarybutylarsine. Journal of Applied Physics, 80(2), 846-852. Lien externe
Enguehard, F., & Bertrand, L. (1996). Optical characterization by temporal deconvolution of 1-D laser-ultrasonics signals part 2: Experiment. Progress in Natural Science, 6(4), S363-S369. Non disponible
Enguehard, F., & Bertrand, L. (1996). Optical characterization by temporal deconvolution of 1-d laser-ultrasonics signals. 1. Theory. Progress in Natural Science, 6, 357-362. Non disponible
Enguehard, F., & Bertrand, L. (1996). Optical characterization by temporal deconvolution of 1-d laser-ultrasonics signals. 2. Experiment. Progress in Natural Science, 6, 363-369. Non disponible
Eriksson, G., Pelton, A., Woermann, E., & Ender, A. (1996). Measurement and thermodynamic evaluation of phase equilibria in the Fe-Ti-O system. Berichte der Bunsengesellschaft für physikalische chemie, 100(11), 1839-1849. Lien externe
Gagnon, G., Caron, M., Currie, J. F., Gujrathi, S. C., Fortin, V., Tremblay, Y., Oueller, L., Wang, M., Biberger, M., & Wong, F. (juin 1996). Effect of a TiN anti-reflecting coating on the performance of Ti/TiN/AlSiCu metallization of VLSI devices [Communication écrite]. 13th International VLSI Multilevel Interconnection (V-MIC) Conference, Santa Clara, CA, USA. Non disponible
Gagnon, G., Caron, M., Currie, J. F., Gujrathi, S. C., Fortin, V., Tremblay, Y., Ouellet, L., Wang, M., Biberger, M., & Wong, F. (juin 1996). Effect of the oxidation of TiN barrier on its efficiency as a diffusion barrier in AlSiCu metallization of VLSI devices [Communication écrite]. 13th International VLSI Multilevel Interconnection (V-MIC) Conference, Santa Clara, CA, USA. Non disponible
Gagnon, G., Currie, J. F., Brebner, J. L., & Darwall, T. (1996). Efficiency of TiN diffusion barrier between Al and Si prepared by reactive evaporation and rapid thermal annealing. Journal of Applied Physics, 79(10), 7612-7620. Lien externe
Gagnon, G., Gujrathi, S. C., Caron, M., Currie, J. F., Tremblay, Y., Ouellet, L., Biberger, M., & Reynolds, R. (1996). Effect of the oxidation of TiN on the stability of the Al/TiN interface. Journal of Applied Physics, 80(1), 188-195. Lien externe
Gauthier, M. (1996). Croissance de la couche inhibitrice FeAlZn lors de la galvanisation en continu [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Gendron, S. (1996). On-line assessment and numerical modeling of thermal fatigue and oxidation damages in turbine airfoils under simulated service conditions [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Ghosh, R., Godbout, N., Lacroix, S., Meunier, M., & Marusic, J.-C. (mai 1996). Génération de seconde harmonique dans les fibres optiques effilées [Communication écrite]. 64e Congrès de l'ACFAS, Montréal, Québec. Non disponible
Gonthier, F., Stryckman, D., Daxhelet, X., Lacroix, S., Ricard, D., & Bures, J. (janvier 1996). Coupleurs 1x8 à fibres optiques unimodales fusionnées [Communication écrite]. 64e congrès de l'ACFAS, Montréal, Québec. Non disponible
Grenier, S. (1996). Développement de la méthode de déposition réactive par plasma pour la formation de films de nitrure de titane [Thèse de doctorat, École Polytechnique de Montréal]. Non disponible
Guillet, A., Es-Sadiqi, E., L'Espérance, G., & Hamel, F. G. (1996). Microstructure and mechanical properties of strip cast 1008 steel after simulated coiling and batch annealing, cold rolling. ISIJ International, 36(9), 1190-1198. Lien externe
Gujrathi, S. C., Poitras, D., Sapieha, J.-E., & Martinu, L. (1996). ERD-TOF characterization of silicon-compound multilayer and graded-index optical coatings. Nuclear Instruments & Methods in Physics Research. Section B, Beam Interactions With Materials and Atoms, 118(1-4), 560-565. Lien externe
Hajjaji, M., Cutler, L., & L'Espérance, G. (1996). Effects of lithium addition and wheel velocity on the microstructure of aluminium-lithium alloy ribbons. Journal of Materials Science, 31(4), 1027-1034. Lien externe
Hajjaji, M., Cutler, L., & L'Espérance, G. (1996). Phases in as-spun and aged binary aluminium-lithium ribbons. Journal of Materials Science, 31(14), 3715-3721. Lien externe
Hammoutène, A. (1996). Caractérisations optique et mécanique des matériaux par ultrasons engendrés par laser [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Hammoutene, A., Enguehard, F., & Bertrand, L. (1996). Laser-ultrasonic Poisson's ratio assessment of non-conducting isotropic materials with temporal convolutions effects corrected. Progress in Natural Science, 6(4), S382-S385. Non disponible
Hammoutene, A., Enguehard, F., & Bertrand, L. (1996). Laser-ultrasonic poissons ratio assessment of nonconducting isotropic materials with temporal convolutions effects corrected. Progress in Natural Science, 6, 382-385. Non disponible
Henault, A., Cournoyer, A., Enguehard, F., & Bertrand, L. (1996). A study of dynamic thermal expansion using a laser-generated ultrasound 1-d model. Progress in Natural Science, 6(4), S370-S373. Non disponible
Hénault, A., Cournoyer, A., Enguehard, F., & Bertrand, L. (1996). A study of dynamic thermal-expansion using a laser-generated ultrasound 1-d model. Progress in Natural Science, 6, 370-S373. Non disponible
Héroux, J. B., Boughaba, S., Ressejac, I., & Meunier, M. (1996). CO₂ laser-assisted removal of submicron particles from solid-surfaces. Journal of Applied Physics, 79(6), 2857-2862. Lien externe
Héroux, J. B., Boughaba, S., Sacher, E., & Meunier, M. (1996). CO₂ laser-assisted particle removal from silicon surfaces. Canadian Journal of Physics, 74(1), 95-99. Lien externe
Heuzey, M.-C., & Pelton, A. (1996). Critical-evaluation and optimization of the thermodynamic properties of liquid-tin solutions. Metallurgical and Materials Transactions. B, Process Metallurgy and Materials Processing Science, 27(5), 810-828. Lien externe
Ho, J. C. K., & Piron, D.-L. (1996). Active surface area in oxide electrodes by overpotential deposited oxygen species for the oxygen evolution reaction. Journal of Applied Electrochemistry, 26(5), 515-521. Lien externe
Hollander, A., Sapieha, J.-E., & Wertheimer, M. R. (1996). The influence of vacuum-ultraviolet radiation on poly(ethylene-terephthalate). Journal of Polymer Science. Part A, Polymer Chemistry Edition, 34(8), 1511-1516. Lien externe
Imai, T., Kojima, S., L'Espérance, G., Hong, B. D., Jiang, D., & Nieh, T. G. (1996). Effects of temperature on the superplastic characteristics of a powder-metallurgy pure aluminum. Scripta Materialia, 35(10), 1189-1193. Lien externe
Imai, T., Kojima, S., Tochigi, I., L'Espérance, G., & Hong, B. (février 1997). High strain rate superplasticity of discontinuous fiber reinforced pure aluminum composites [Communication écrite]. Light weight alloys for aerospace applications IV : 4th symposium, Orlando, Fl, USA. Non disponible
Imai, T., Kojima, S., Tochigi, I., L'Espérance, G., Hong, B., & Jiang, D. (août 1996). High strain rate superplasticity of discontinuous fiber reinforced aluminum alloy composites [Communication écrite]. Processes in advanced materials and mechanics : International conference on advanced materials, Beijing, China. Non disponible
Imai, T., Tochigi, I., Ai, K., L'Espérance, G., & Hong, B. (1996). High-strain rate superplasticity of a beta-si3n4 whisker-reinforced pure aluminum composite made by squeeze casting. Scripta Materialia, 34(10), 1627-1631. Lien externe
Ivanov, D., & Yelon, A. (1996). Chemical sensitivity of the thickness-shear-mode quartz-resonator nanobalance. Journal of The Electrochemical Society, 143(9), 2835-2841. Lien externe
Ivanov, D., & Yelon, A. (mai 1996). Limits to the application of the quartz-crystal resonator as a gravimetric instrument [Communication écrite]. International Symposium on New Directions in Electroanalytical Chemistry : 189th Meeting of the Electrochemical Society, Los Angeles, CA, USA. Non disponible
Izquierdo, R., Bergeron, A., Meunier, M., Ivanov, D., Currie, J. F., & Yelon, A. (octobre 1996). Pulsed laser deposition of NASICON and sodium nitride thin films for the fabrication of gas sensors [Communication écrite]. Electrochemical Society Annual Meeting, San Antonio, TX, USA. Non disponible
Izquierdo, R., Hanus, F., Lang, T., Ivanov, D., Meunier, M., Laude, L., Currie, J. F., & Yelon, A. (1996). Pulsed laser deposition of NASICON thin films. Applied Surface Science, 96-98, 855-858. Lien externe
Jak, E., Decterov, S., Hayes, P. C., & Pelton, A. (janvier 1997). Thermodynamic modelling of the system PbO-ZnO-FeO-Fₑ2O₃-CaO-SiO₂ for zinc/lead smelting [Communication écrite]. 5th International Conference on Molten Slags, Fluxes, and Salts '97, Sydney, Australia. Non disponible
Kemp, M., Roitberg, A., Mujica, V., Wanta, T., & Ratner, M. A. (1996). Molecular wires: extended coupling and disorder effects. Journal of Physical Chemistry, 100(20), 8349-8355. Lien externe
Kirchnerova, J., & Pelton, A. (1996). Solid electrolyte probes for strontium employing a SrCl₂ -AgCl/Ag reference and thermodynamic evaluation of the SrCl₂ -AgCl system. Solid State Ionics, 93(1-2), 165-170. Lien externe
Kirchnerova, J., & Pelton, A. (1996). Synthesis of strontium beta alumina precursor powders and their use in the fabrication of dense ceramic electrolytes. Solid State Ionics, 93(1-2), 159-164. Lien externe
L'Espérance, G., Dionne, M., & Tremblay, S. (août 1996). Extracting 3-D information from SEM and TEM images: Approaches and applications in the physical sciences [Communication écrite]. Microscopy and microanalysis 1996, Minneapolis, MN (United States). Non disponible
L'Espérance, G., Duchesne, E., & De Rege, A. (1996). Effect of materials and process parameters on microstructure and properties of sinter hardening alloys. Advances in powder metallurgy and particulate materials, 3(11), 397-413. Non disponible
L'Espérance, G., Martel, S., & De Rege, A. (juin 1996). Detailed microstructural characterization of recently developedpartically alloyed powders [Communication écrite]. Advances in Powder Metallurgy and Particulate Materials -1996 : 1996 World Congress on Powder Metallurgy & Particulate Materials, Washington, DC, USA. Non disponible
Labib, A., & Allaire, C. (1996). Dynamic Young's modulus as a function of soft thermal shock temperatures for cathode block materials for aluminum reduction cells. Canadian Ceramic Society Journal, 65(2), 143-150. Non disponible
Lang, T., Caron, M., Izquierdo, R., Ivanov, D., Currie, J. F., & Yelon, A. (1996). Material characterization of sputtered sodium-ion conductive ceramics for a prototype CO₂ micro-sensor. Sensors and Actuators. B, Chemical, 31(1-2), 9-12. Lien externe
Laplante, S., Legros, N., Ajersch, F., Clément, B., & Turenne, S. (janvier 1996). Extrusion of thixocast semi-solid A356-12SiCp cylindrical sections [Communication écrite]. 4th International Conference on Semi-Solid Processing of Alloys and Composites, Sheffield. Non disponible
Lecours, A., Caron, M., Ciureanu, P., Turcotte, G., Ivanov, D., Yelon, A., & Currie, J. F. (1996). Laser patterning of thin-film electrochemical gas sensors. Applied Surface Science, 96-98, 341-346. Lien externe
Lecuyer, J., Mouton, A., Legros, A., Selmani, A., Currie, J. F., & Decterov, S. (1996). Applications of selenium-based alloys for digital radiography. Nuclear Instruments & Methods in Physics Research. Section. A, Accelerators, Spectrometers, Detectors and Associated Equipment, 380(1-2), 493-496. Lien externe
Lefebvre, G. (1996). Réalisation de contacts ohmiques sur phosphure d'indium de types N et P [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Lefebvre, L. P., L'Espérance, G., & Suery, M. Age-hardening behavior of al-1 wt-% mg/sic(ind p) composites fabricated with TiO₂-coated sic particles [Communication écrite]. Processing, properties, and applications of cast metal matrix composites: symposium held at the 1996 TMS Fall Meeting in Cincinnati, Ohio. Non disponible
Lefebvre, L. P., L'Espérance, G., & Suéry, M. (janvier 1996). Age-hardening behavior of Al-wt%/Mg/SiCo composites fabricated with TiO2 coated SiC particles [Communication écrite]. TMS fall meeting- Properties and applications of cast metal matrix composites, Cincinnati, USA. Non disponible
Li, X., & Rigaud, M. (août 1996). Effect of graphite quality on oxidation and corrosion resistance of magnesia-carbon refractories [Communication écrite]. Advances in refractories for the metallurgical industries II : 35th Annual conference of Metallurgists of CIM, Montréal, Québec. Non disponible
Li, X., & Rigaud, M. (janvier 1996). Oxidation and corrosion resistance of MgO-C refractories with anti-oxidants [Communication écrite]. 96 international symp. on refractories, Haikou, China. Non disponible
Li, X.-M., & Rigaud, M. (1996). Methods to characterize oxidation resistance for magnesia-carbon refractories. China's Refractories, 5(3), 13-22. Lien externe
Malek-Tabrizi, A. (1996). Integrated optics mach-zehnder interferometer sensor [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Malek-Tabrizi, A., Najafi, S. I., & Martinu, L. (janvier 1996). Glass integrated optics symmetric and nonsymmetric Mach-Zehnder interferometer sensors [Communication écrite]. Functional Photonic and Fiber Devices, San Jose, CA, USA. Lien externe
Marchand, H. (1996). Epitaxie en phase vapeur aux organométalliques et caractérisation de nanostructures auto-organisées à base de InAs/InP [Mémoire de maîtrise, École Polytechnique de Montréal]. Non disponible
Martinu, L. (janvier 1996). Low-pressure plasma processing for optoelectronics applications [Communication écrite]. Functional Photonic and Fiber Devices, San Jose, CA, USA. Lien externe
Meunier, M., Izquierdo, R., Shen, B., Lecours, A., Allard, M., Bergeron, A., Hanus, F., Boughaba, S., Ivanov, D., Currie, J. F., Laude, L., & Yelon, A. (novembre 1995). Applications of laser processing for sensors and actuators [Communication écrite]. MRS Fall Symposium, Boston, MA, USA. Lien externe
Mujica, V., Kemp, M., Roitberg, A., & Ratner, M. (1996). Current-voltage characteristics of molecular wires: Eigenvalue staircase, Coulomb blockade, and rectification. Journal of Chemical Physics, 104(18), 7296-7305. Lien externe
Nagarur, A., Flores, R., Dominguez, L., de la Cruz, D., Lu, J., Fonseca, J., Selnau, H., Townsend, S., Godbout, N., Monette, E., & Lacroix, S. (janvier 1996). Single and multiple-core plastic optical fiber structures [Communication écrite]. ASC/OSA annual meeting, Florida, USA. Non disponible
Nagarur, A., Flores, R., Subramanian, A., Dominguez, L., Delacruz, D., Lu, J., Fonseca, J., Selnau, H., Townsend, S., Dirk, C. W., Godbout, N., Monette, É., & Lacroix, S. (1996). Single and multiple-core plastic optical-fiber structures. Abstracts of Papers of the American Chemical Society, 212, 156--156-. Non disponible
Naseh, S., Landsberger, L. M., Paranjape, M., Nikpour, B., Kahrizi, M., Antaki, R., & Currie, J. F. (mai 1996). Release-control structure for post-process release of a micromachined cantilever [Communication écrite]. Canadian Conference on Electrical and Computer Engineering : Glimpse into the 21st century, Calgary, AB, Canada. Lien externe
Nijimbere, L. (1996). Étude de la propagation en fatigue corrosion de l'alliage d'aluminium 7075 et de l'acier inoxydable austentitique 316 [Mémoire de maîtrise, École Polytechnique de Montréal]. Non disponible
Ntakaburimvo, N. (1996). Contributions instrumentales en microscopie électronique en transmission et caractérisation chimique de précipités contenant du Cu [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Ouellet, L., Tremblay, Y., Gagnon, G., Caron, M., Currie, J. F., Gujrathi, S. C., & Biberger, M. (1996). The effect of the Ti glue layer in an integrated Ti/TiN/Ti/AlSiCu/TiN contact metallization process. Journal of vacuum science & technology. B. Microelectronics and nanometer structures processing, measurement and phenomena, 14(4), 2627-2635. Lien externe
Ouellet, L., Tremblay, Y., Gagnon, G., Caron, M., Currie, J. F., Gujrathi, S. C., & Biberger, M. (1996). Effect of the Ti/TiN bilayer barrier and its surface treatment on the reliability of a Ti/TiN/AlSiCu/TiN contact metallization. Journal of vacuum science & technology. B. Microelectronics and nanometer structures processing, measurement and phenomena, 14(6), 3502-3508. Lien externe
Ouellet, O. L., Tremblay, Y., Gagnon, G., Caron, M., Currie, J. F., Gujrathi, S. C., Biberger, M., & Reynolds, R. (1996). The effect of an oxygen plasma exposure on the reliability of a ti/tin contact metallization. Journal of Applied Physics, 79(8, pt. 1), 4438-4443. Lien externe
Paradis, P., Babin, F., & Gagné, J.-M. (1996). Study of the aerodynamic trap for containerless laser materials processing in microgravity. Review of Scientific Instruments, 67(1), 262-270. Lien externe
Paradis, P.-F. (1996). Fusion et vitrification sans contact par piégeage aérodynamique et par laser de sphères diélectriques au sol et en microgravité [Thèse de doctorat, École Polytechnique de Montréal]. Non disponible
Pelton, A. (1996). Phase diagrams. Dans Physical metallurgy (4e éd., p. 471-534). Lien externe
Pelton, A. (1996). Phase relations (section III-5). Dans Pneumatic steelmaking (p. 83-91). Non disponible
Pelton, A., & Sharma, R. A. (1996). Thermodynamic evaluation of phase-equilibria in MCl₃-MF₃-MgCl₂-MgF₂ systems where m=La, Nd, Ce. Calphad-Computer Coupling of Phase Diagrams and Thermochemistry, 20(2), 231-246. Lien externe
Piron, D.-L., & Fan, C. (1996). Study of anomalous nickel-cobalt electrodeposition with different electrolytes and current densities. Electrochimica Acta, 41(10), 1713-1719. Lien externe
Poitras, D., Leroux, P., Sapieha, J.-E., Gujrathi, S. C., & Martinu, L. (1996). Characterization of homogeneous and inhomogeneous Si-based optical coatings deposited in dual-frequency plasma. Optical Engineering, 35(9), 2693-2699. Lien externe
Popovici, D., Piyakis, K., Sacher, E., & Meunier, M. (novembre 1995). Terraced copper growth deposited onto Teflon AF1600 by the excimer laser irradiation of Cu(hfac) TMVS [Communication écrite]. MRS Fall Symposium, Boston, MA, USA. Lien externe
Popovici, D., Sacher, E., Meunier, M., Martinu, L., Léonard, D., & Bertrand, P. (janvier 1996). Spontaneous reaction of Cu(hfac) (TMVS) vapor with DuPont teflon AF1600 [Communication écrite]. Electrochemical Society Annual Meeting. Non disponible
Quesnel, S. (1996). Essai sous gradient thermique du corindonage des réfractaires : application aux fours de traitement de l'aluminium [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Quesnel, S., Afshar, S., & Allaire, C. (février 1996). Corrosion of refractories at the bellyband of aluminum melting and holding furnaces [Communication écrite]. 1996 125th TMS Annual Meeting, Anaheim, CA, USA. Lien externe
Quesnel, S., Allaire, C., & Afshar, S. (août 1996). Corrosion of refractories at the bellyband of aluminium holding and melting furnaces [Communication écrite]. Advances in refractories for the metallurgical industries II : 35th Annual conference of Metallurgists of CIM, Montréal, Québec. Non disponible
Ratle, A. (1996). Corrélation entre la résistance à l'impact mécanique et au choc thermique des réfractaires [Mémoire de maîtrise, École Polytechnique de Montréal]. Non disponible
Ratle, A., & Allaire, C. (1996). New method for impact testing of refractories. Canadian Ceramic Society Journal, 65(4), 263-269. Non disponible
Ratle, A., Lagacé, M., Pandolfelli, V., Allaire, C., & Rigaud, M. (1996). A simple method for evaluating elastic modulus of refractories at high temperatures. Canadian Ceramic Quarterly, 65(3), 202-205. Non disponible
Reid, B., Aboukhalil, M., & Maciejko, R. (1996). Doping effects on carrier capture in a single quantum well by ensemble monte carlo. Canadian Journal of Physics, 74(1), 220-224. Lien externe
Rigaud, M., & Zhong, W. (novembre 1996). Role of o'sialon on oxidation resistance of MgO-C refractories [Communication écrite]. 96 international symp. on refractories, Haikou, China. Non disponible
Rigaud, M., Lagacé, M., & Blanchar, M. (janvier 1996). Natural graphites for carbon-bonded refractories [Communication écrite]. 3nd Internationationale Meeting of Pacific Rim Ceramic Societies, Cairns, Australia. Non disponible
Rigaud, M., Li, X., & Lagacé, M. (août 1996). Characterisation of flake graphite for carbon-bonded refractories [Communication écrite]. Advances in refractories for the metallurgical industries II : 35th Annual conference of Metallurgists of CIM, Montréal, Québec. Non disponible
Rigaud, M., Wang, N., & Xing, C. (janvier 1996). Magnesia-based castables: some recent developments [Communication écrite]. 2nd International Meeting of Pacific Rim Ceramic societies, Cairns, Australia. Non disponible
Robertson, C., Wertheimer, M. R., Fournier, D., & Lamarre, L. (1996). Study on the morphology of XLPE power cable by means of atomic force microscopy. IEEE Transactions on Dielectrics and Electrical Insulation, 3(2), 283-288. Lien externe
Royer, A. (1996). Comment on ''Reduced system dynamics from the N-body Schrödinger equation'' [Commentaire ou lettre]. Physical Review Letters, 76(17), 3233-3233. Lien externe
Royer, A. (1996). Driven 2-level atom - a simplified derivation. Physical review. A, 54(4), 3685-3686. Lien externe
Royer, A. (1996). Phase states and phase operators for the quantum harmonic oscillator. Physical review. A, 53(1), 70-108. Lien externe
Royer, A. (1996). Reduced Dynamics with Initial Correlations, and Time-Dependent Environment and Hamiltonians. Physical Review Letters, 77(16), 3272-3275. Lien externe
Royer, A. (1996). Why are the energy-levels of the quantum harmonic-oscillator equally spaced. American Journal of Physics, 64(11), 1393-1399. Lien externe
Rudkowski, P., Ciureanu, P., Rudkowska, G., Britel, M. R., Ménard, D., Strom-Olsen, J. O., & Yelon, A. (1996). Anisotropic magnetoresistance and giant magnetoimpedance effects in soft-magnetic fibers. Journal of Magnetism and Magnetic Materials, 160, 313-314. Lien externe
Sapieha, J.-E., Martinu, L., Wertheimer, M. R., Günther, P., Schellin, R., Thielemann, C., & Sessler, G. M. (1996). Plasma deposition of low-stress electret films for electroacoustic and solar cell applications. Journal of vacuum science and technology. A, Vacuum, surfaces, and films, 14(5), 2775-2779. Lien externe
Savadogo, O. (juin 1996). New materials for water electrolysis and photoelectrolysis [Communication écrite]. 11th World Hydrogen Energy Conference, Stuttgart, GER. Non disponible
Savadogo, O., & Beck, P. (1996). Five percent platinum-tungsten oxide-based electrocatalysts for phosphoric acid fuel cell cathodes. Journal of The Electrochemical Society, 143(12), 3842-3846. Lien externe
Savadogo, O., & Essalik, A. (1996). Effect of platinum particle size on the oxygen reduction reaction on 2% Pt-1% H₂WO₄ in phosphoric acid. Journal of The Electrochemical Society, 143(6), 1814-1821. Lien externe
Schühler, N., da Silva Sobrinho, A. S., Sapieha, J.-E., Andrews, M., & Wertheimer, M. R. (mai 1996). ATR-FTIR spectroscopic studies of PET coated with thin SiO₂ barrier layers [Communication écrite]. SVC Technical Conference, Philadelphia, PA.. Lien externe
Sebastian, P. J., Martinez, M., Eapen, D., Solorza, O., & Savadogo, O. (1996). Hydrogen energy and fuel-cells - a recent research-and-development program in mexico. International Journal of Hydrogen Energy, 21(7), 613-616. Lien externe
Shadaram, M., Martinez, J. J., Garcia, F., Tavares, D., Symon, A., Godbout, N., & Lacroix, S. (janvier 1996). Application of ferrocene-based polymers as variable index materias in fiber optic gas sensors [Communication écrite]. Functional photonic and fiber devices : SPIE, San Jose, CA, USA. Lien externe
Shah, S. A., Zeng, A., Jackson, M. K., Pouliot, L., Lecours, A., & Currie, J. F. (1996). Guided surface waves in photoconductive excitation. IEEE Microwave and Guided Wave Letters, 6(9), 309-311. Lien externe
Shah, S. A., Zeng, A., Jackson, M. K., Wong, W. S., Pouliot, L., Lecours, A., & Currie, J. F. (1996). Millimeter-wave time-resolved measurement near a discontinuity - Separating temporally overlapped incident and reflected signals. IEEE Microwave and Guided Wave Letters, 6(2), 79-81. Lien externe
Shah, S. A., Zeng, A., Wong, W. S., Jackson, M. K., Pouliot, L., Lecours, A., & Currie, J. F. (1996). Separating temporally-overlapped wave-forms with electrooptic sampling. Optical and Quantum Electronics, 28(7), 953-960. Lien externe
Shen, B., Allard, M., Boughaba, S., Izquierdo, R., & Meunier, M. (1996). Laser-micromachining silicon three-dimensional structures, tunnels, and cavities. Canadian Journal of Physics, 74(S1), 54-58. Lien externe
Simard, J.-M. (1996). Fatigue oligocyclique des superalliages monocristallins à base de nickel [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Simoneau, M., L'Espérance, G., & Schulz, R. (juillet 1995). Abnormal grain growth in sintered YBa₂Cu₃O₇₋[dₑₗₜₐ] nanocrystalline powders produced by high energy ball milling [Communication écrite]. International symposium on metastable, mechanically alloyed and nanocrystalline materials. Publié dans Materials Science Forum, 225-227(2). Lien externe
Singh, A., Masut, R. A., & Bensaada, A. (septembre 1994). Characterization of interface states in thin epitaxial film In₀.₇₅Ga₀.₂₅P/Ag diodes [Communication écrite]. Surfaces, vacuum and their applications. Publié dans AIP Conference Proceedings, 378(1). Lien externe
Sundararaman, C. S., Tazlauanu, M., Mihelich, P., Bensaada, A., & Masut, R. A. (avril 1996). 1-10 GHz interface engineered SiNₓ/InP/InGaAs HIGFET technology [Communication écrite]. 1996 8th International Conference on Indium Phosphide and Related Materials, Schwaebisch-Gmuend, Germany. Lien externe
Symon, A. (1996). Étude et réalisation de démultiplexeurs tout-fibre optique serrés en longueur d'onde [Mémoire de maîtrise, École Polytechnique de Montréal]. Non disponible
Symon, A., Lacroix, S., & Bures, J. (janvier 1996). Dense all-optical fiber WDM by means of a Mach-Zehnder interferometer [Communication écrite]. Functional photonic and fiber devices, San Jose, CA, USA. Lien externe
Tait, R. N., Landsberger, L. M., Currie, J. F., McKinnon, G. H., Parameswaran, M., Robinson, A. M., & Gale, D. J. (mai 1996). A design and implementation methodology for micromachining [Communication écrite]. Canadian Conference on Electrical and Computer Engineering : Glimpse into the 21st century, Calgary, AB, Canada. Lien externe
Thompson, W. T., Bale, C. W., & Pelton, A. (1996). FACT (Facility for the Analysis of Chemical Thermodynamics) User's instruction manual. (4e éd.). Non disponible
Tremblay, E., Savadogo, O., Boily, S., Van Neste, A., & Schulz, R. (1996). Study of the structure and electrochemical properties of mechanically alloyed Ti-TiO mixtures. Materials Science Forum, 225-227(2), 813-818. Lien externe
Tremblay, M., Guillaud, C., & Bouchard, M. A. (juin 1996). EDM - A model for optimising the short-term power operation of a complex hydroelectric network [Communication écrite]. 49. conférence annuelle de l'Association canadienne des ressources hydriques (ACRH), Québec (Canada). Non disponible
Trochu, F., Brailovskii, V., Yaoyan, K., Terriault, P., & Meunier, M. (1996). Computer modeling of parts and devices with shape memory. Technical physics, 41(11), 1186-1188. Non disponible
Tronc, P., Mani, H., Maciejko, R., Reid, B., Leroux, M., Lazzari, J. L., & Segura-fouillant, C. (1996). X-lines, l-lines, and gamma-lines in low-temperature photoluminescence spectra of al₀.₄₇Ga₀.₅₃As₀.₀₃₅Sb₀.₉₆₅ Alloys. Physica Status Solidi. B, Basic Research, 196(2), 453-460. Lien externe
Tsunemichi, I., Sumito, K., L'Espérance, G., Bande, H., & Daming, J. (1996). Effect of volume fraction of aln particle on superplasticity of aln/6061 aluminum alloy composite. Scripta Materialia, 35(10), 1199-1204. Lien externe
Vallon, S., Brenot, R., Hofrichter, A., Drevillon, B., Gheorghiu, A., Senemaud, C., Sapieha, J.-E., Martinu, L., & Poncin-Epaillard, F. (1996). Adhesion mechanisms in silica layers on plasma-treated polymers. Part II. Polypropylene. Journal of Adhesion Science and Technology, 10(12), 1313-1332. Lien externe
Vallon, S., Drevillon, B., Poncin-Epaillard, F., Sapieha, J.-E., & Martinu, L. (1996). Argon plasma treatment of polycarbonate: In situ spectroellipsometry study and polymer characterizations. Journal of vacuum science and technology. A, Vacuum, surfaces, and films, 14(6), 3194-3201. Lien externe
Vallon, S., Hofrichter, A., Drevillon, B., Sapieha, J.-E., Martinu, L., & Poncin-Epaillard, F. (avril 1996). Improvement of the adhesion of silica layers to polypropylene induced by nitrogen plasma treatment [Communication écrite]. 23rd International Conference on Metallurgical Coatings and Thin Films (ICMCTF 1996), San Diego, CA. Publié dans Thin solid films, 290-291. Lien externe
Vallon, S., Hofrichter, A., Drevillon, B., Sapieha, J.-E., Martinu, L., Poncin-Epaillard, F., Schalchli, A., & Benattar, J. J. (septembre 1996). Adhesion improvement of silica layers on polypropylene and polycarbonate induced by plasma treatments [Communication écrite]. EURADH 1996 and Adhesion 1996, Cambridge. Non disponible
Vallon, S., Hofrichter, A., Guyot, L., Drevillon, B., Sapieha, J.-E., Martinu, L., & Poncin-Epaillard, F. (1996). Adhesion mechanisms of silica layers on plasma-treated polymers. Part I. Polycarbonate. Journal of Adhesion Science and Technology, 10(12), 1287-1311. Lien externe
Verreman, Y. Simulation of metal forming using FORGE 2 [Communication écrite]. Hot Workability Steels Light Alloys-Compos. Non disponible
Verreman, Y., & Nie, B. (1996). Early development of fatigue cracking at manual fillet welds. Fatigue and Fracture of Engineering Materials & Structures, 19(6), 669-681. Lien externe
Villermaux, F., Tabrizian, M., Meunier, M., Piron, D.-L., & Yahia, L. (mai 1996). Laser treatment on NiTi shape memory alloy [Communication écrite]. 5th World Biomaterials Congress, Toronto, Can. Non disponible
Villermaux, F., Tabrizian, M., Yahia, L., Czeremuszkin, G., & Piron, D.-L. (1996). Corrosion-resistance improvement of niti osteosynthesis staples by plasma-polymerized tetrafluoroethylene coating. Bio-Medical Materials and Engineering, 6(4), 241-254. Lien externe
Wang, N. (1996). Spinel bonded magnesia based refractory castables with hydratable alumina as binder [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Wertheimer, M. R., Thomas, H. R., Perri, M. J., Sapieha, J.-E., & Martinu, L. (1996). Plasmas and polymers: from laboratory to large-scale commercialization. Pure and Applied Chemistry, 68(5), 1047-1053. Lien externe
Yahia, L., Lombardi, S., Piron, D.-L., Sapieha, J.-E., & Wertheimer, M. R. (1996). NiTi shape memory alloys treated by plasma-polymerized tetrafluoroethylene : A physicochemical and electrochemical characterization. Medical progress through technology, 21(4), 187-193. Non disponible
Yelon, A., Ménard, D., Britel, M. R., & Ciureanu, P. (1996). Calculations of giant magnetoimpedance and of ferromagnetic resonance response are rigorously equivalent. Applied Physics Letters, 69(20), 3084-3085. Lien externe
Zayed, J., Mikhail, M., Loranger, S., Kennedy, G. G., & L'Espérance, G. (1996). Exposure of taxi drivers and office workers to total and respirable manganese in an urban-environment. American Industrial Hygiene Association Journal, 57(4), 376-380. Lien externe
Zhao, Y. G., Jing, R., Zou, Y. H., Xia, Z. J., Huang, X. L., Chen, W. X., & Masut, R. A. (1996). Alloy composition dependence of photoexcited carrier dynamics in GaₓIn₁−ₓP/InP:Fe (x<0.18). Applied Physics Letters, 68(5), 696-698. Lien externe
Zhong, W. M., Goiffon, E., L'Espérance, G., Suery, M., & Blandin, J. J. (1996). Effect of thermomechanical processing on the microstructure and mechanical properties of Al-Mg (5083)/SiCp and Al-Mg (5083)/Al₂O₃ p composites. Part 1 : Dynamic recrystallization of the composites. Materials Science and Engineering. Part A, Structural materials: properties, microstructure and processing, 214(1-2), 84-92. Lien externe
Zhong, W. M., L'Espérance, G., & Suery, M. (1996). Effect of thermomechanical processing on the microstructure and mechanical properties of Al-Mg (5083)/SiCp and Al-Mg (5083)/Al₂O₃ p composites. Part 2 : Tensile properties at different temperatures. Materials Science and Engineering. Part A, Structural materials: properties, microstructure and processing, 214(1-2), 93-103. Lien externe
Zhong, W. M., L'Espérance, G., & Suery, M. (1996). Effect of thermomechanical processing on the microstructure and mechanical properties of Al-Mg (5083)/SiCp and Al-Mg (5083)/Al₂O₃ p composites. Part 3 : Fracture mechanisms of the composites. Materials Science and Engineering. Part A, Structural materials: properties, microstructure and processing, 214(1-2), 104-114. Lien externe
Zhong, W., & Rigaud, M. (1996). Role of additives on pressureless sintering of O'Sialon. Canadian Ceramics Quarterly, 65(3), 205-210. Non disponible
Zhong, W., L'Espérance, G., & Suéry, M. (1996). Interfacial reactions in Al-Mg(5083) SiCp composites during fabrication and remelting. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, 26(10), 2637-2649. Lien externe