 | Monter d'un niveau |
Abderrafai, Y., Barthelat, F., & Therriault, D. (juillet 2017). 3D printing of bioinspired functionally graded composites [Communication écrite]. 54th Annual Technical Meeting of the Society of Engineering Science (SES 2017), Boston, United States. Non disponible
Aïssa, B., Nedil, M., Belaidi, A., Isaifan, R. J., Bentouaf, A., Fauteux, C., & Therriault, D. (2017). Photoluminescence quenching, structures, and photovoltaic properties of ZnO nanostructures decorated plasma grown single walled carbon nanotubes. Journal of Nanoparticle Research, 19(5), 8 pages. Lien externe
Al-Kebsi, A., Pena, D., Laurendeau, É., Mose, R., & Hoarau, Y. (août 2017). Multi-step level-set ice accretion simulation with the NSMB solver [Communication écrite]. 23e Congrès français de mécanique, Lille, France (14 pages). Lien externe
Alloui, Z., Rebhi, R., Mamou, M., & Vasseur, P. (2017). Effects of quadratic drag on natural convection in a tilted porous layer with uniform heat flux from the side. International Journal of Heat and Mass Transfer, 115, 314-325. Lien externe
Amar, L. (2017). Contrôle passif non linéaire d'un profil aéroélastique, simulations et expérimentations [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Amiri, S., Devals, C., Dompierre, J., Camarero, R., & Guibault, F. (juillet 2017). Von Karman vortex shedding study with foam-extend-4.0 [Communication écrite]. 12th Open Foam Workshop, Exeter, UK (30 pages). Lien externe
Ammar, S. (2017). Impact de gouttelette et changement de phase par la méthode de Boltzmann sur réseau [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Ammar, S., Legros, C., & Trépanier, J.-Y. (2017). Conceptual design, performance and stability analysis of a 200 passengers Blended Wing Body aircraft. Aerospace Science and Technology, 71(Supplement), 325-336. Lien externe
Ammar, S., Legros, C., & Trépanier, J.-Y. (juillet 2017). Surface tension adjustment using a multiphase three-dimensional multi-relaxation time (MRT) lattice Boltzmann model at large density ratios [Communication écrite]. 14th International Conference for Mesoscopic Methods in Engineering and Science (ICMMES 2017), Nantes, France. Non disponible
Ammar, S., Pernaudat, G., & Trépanier, J.-Y. (2017). A multiphase three-dimensional multi-relaxation time (MRT) lattice Boltzmann model with surface tension adjustment. Journal of Computational Physics, 343, 73-91. Lien externe
Appio, F. P., Achiche, S., Martini, A., & Beaudry, C. (2017). On designers' use of biomimicry tools during the new product development process: an empirical investigation. Technology Analysis & Strategic Management, 29(7), 1-15. Disponible
Arabi, S., Trépanier, J.-Y., & Camarero, R. (2017). A simple extension of Roe's scheme for real gases. Journal of Computational Physics, 329, 16-28. Lien externe
Aramesh, M., Attia, H. M., Kishawy, H. A., & Balazinski, M. (2017). Observation of a unique wear morphology of cBN inserts during machining of titanium metal matrix composites (Ti-MMCs); leading to new insights into their machinability. International Journal of Advanced Manufacturing Technology, 92(1-4), 519-530. Lien externe
Assaf, B., Sobotka, V., & Trochu, F. (2017). Measurement of the in-plane thermal conductivity of long fiber composites by inverse analysis. Open Journal of Composite Materials, 7(2), 85-99. Disponible
Attendu, J. M., & Ross, A. (2017). Time domain nearfield acoustical holography without wrap-around error and spectral leakage for forward propagation. Journal of the Acoustical Society of America, 141(2), 1039-1050. Lien externe
Attendu, J.-M. (2017). Convolution et déconvolution linéaire 3-D appliquées à l'holographie acoustique temporelle [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Attendu, J.-M., & Ross, A. (2017). Method for finding optimal exponential decay coefficient in numerical Laplace transform for application to linear convolution. Signal Processing, 130, 47-56. Lien externe
Bag, A., Delbergue, D., Bocher, P., Lévesque, M., & Brochu, M. (septembre 2017). Study of short crack growth in shot peened 300M steel [Communication écrite]. 13th International Conference on Shot Peening, Montréal, Québec. Lien externe
Bag, A., Lévesque, M., & Brochu, M. (juin 2017). Investigation on the effect of shot peening on short fatigue crack growth in a high strength steel [Présentation]. Dans 29th Canadian Materials Science Conference, Ottawa, Canada. Non disponible
Baharnezhad, S., & Golhin, A. P. (2017). In-situ measurement and finite element simulation of thermo-mechanical properties of AA 6063 aluminum alloy for MIG weldment. Materials Physics and Mechanics, 32(2), 222-236. Lien externe
Bahrami, S., Khelghatibana, M., Tribes, C., Yi Lo, S., von Fellenberg, S., Trépanier, J.-Y., & Guibault, F. (2017). Application of a territorial-based filtering algorithm in turbomachinery blade design optimization. Engineering Optimization, 49(2), 216-234. Lien externe
Baliga, B. R., Lokhmanets, I., & Cimmino, M. (2017). Numerical methods for conduction-type phenomena. Dans Kulacki, F. A. (édit.), Handbook of Thermal Science and Engineering (53 pages). Lien externe
Batailly, A., Legrand, M., & Pierre, C. (2017). Full three-dimensional rotor/stator interaction simulations in aircraft engines with time-dependent angular speed. Journal of Engineering for Gas Turbines and Power, 139(3), 7 pages. Lien externe
Béguin, C., Étienne, S., & Pettigrew, M. J. (2017). Effect of dispersed phase fraction on the drag coefficient of a droplet or a bubble in an idealized two-phase flow. European Journal of Mechanics, B/Fluids, 65, 339-349. Lien externe
Belzile, B., & Birglen, L. (2017). Optimal design of self-adaptive fingers for proprioceptive tactile sensing. Journal of Mechanisms and Robotics-Transactions of the Asme, 9(5), 11 pages. Lien externe
Belzile, B., & Birglen, L. (mai 2017). Practical Considerations on Proprioceptive Tactile Sensing for Underactuated Fingers [Considérations pratiques sur la mesure tactile proprioceptive pour des doigts sous-actionnés]. [Communication écrite]. CCToMM Mechanisms, Machines and Mechatronics (M3) Symposium, Montréal, Canada (12 pages). Lien externe
Benavente Miana, M. (2017). Viscoelastic Distortion During Manufacturing and Post-Curing of Thermoset Composites: Characterization and Modeling [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Benavente, M., Godon, T., Marcin, L., Courtois, A., Lévesque, M., & Ruiz, E. (août 2017). Modelling of geometrical instabilities in asymmetric composites plates reinforced with 3D interlock fabrics [Communication écrite]. 21st International Conference on Composite Materials (ICCM 2017), Xi'an, China (9 pages). Lien externe
Benavente, M., Marcin, L., Courtois, A., Lévesque, M., & Ruiz, E. (2017). Viscoelastic distortion in asymmetric plates during post curing. Composites Part A: Applied Science and Manufacturing, 103(Supplement), 122-130. Lien externe
Benavente, M., Marcin, L., Godon, T., Lévesque, M., & Ruiz, E. (août 2017). Modelling of geometrical instabilities in asymmetric composite plates reinforced with 3D interlock fabrics [Présentation]. Dans 21st International Conference on Composite Materials, Xi. Lien externe
Benavente, M., Marcin, L., Lévesque, M., & Ruiz, E. (juillet 2017). Geometrical instabilities in asymmetric plates reinforced with 3D interlock fabrics [Communication écrite]. Cancom 2017, Ottawa, Ontario. Non disponible
Benito, I., & Mureithi, N. W. (juillet 2017). Identification of Two-Phase Flow Patterns Using Support Vector Classification [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2017), Waikoloa, Hawaii, USA. Lien externe
Bennacer, R., Reggio, M., Pellerin, N., & Ma, X. (2017). Differentiated heated lid driven cavity interacting with tube: a lattice Boltzmann study. Thermal Science, 21(1A), 89-104. Disponible
Bernal, A., Hébert, A., Roman, J. E., Miró, R., & Verdú, G. (avril 2017). Calculation of non-fundamental Modes in TRIVAC5 with SLEPc [Communication écrite]. International Conference on Mathematics & Computational Methods Applied to Nuclear Science & Engineering (M&C 2017), Jeju, Korea. Lien externe
Bernal, A., Hébert, A., Roman, J. E., Miro, R., & Verdu, G. (2017). A KrylovSchur solution of the eigenvalue problem for the neutron diffusion equation discretized with the RaviartThomas method. Journal of Nuclear Science and Technology, 54(10), 1085-1094. Lien externe
Bianchetti, C., Lévesque, M., & Brochu, M. (septembre 2017). Effect of shot peening on the fatigue life of AA 7050-T7451 [Communication écrite]. 13th International Conference on Shot Peening, Montréal, Québec. Lien externe
Billotte, C., Fotsing, E.-R., & Ruiz, E. (2017). Optimization of alumina slurry for oxide-oxide ceramic composites manufactured by injection molding. Advances in Materials Science and Engineering, 2017, 1-9. Disponible
Birglen, L. (juillet 2017). Design of a partially-coupled self-adaptive robotic finger optimized for collaborative robots [Communication écrite]. Robotics: Science and Systems (RSS 2017), Cambridge, MA. Lien externe
Birglen, L. (2017). Mechanical finger for grasping apparatus. (Demande de brevet no US20170252930). Lien externe
Birglen, L., & Belzile, B. (mai 2017). Practical consideration on proprioreceptive tactile sensing for underactuated fingers [Communication écrite]. CCToMM Symposium on Mechanisms, Machines, and Mechatronics, Montréal, Québec. Lien externe
Birglen, L., & Fedorov, D. (mai 2017). Geometric optimization of a self-adaptive robotic leg [Communication écrite]. CCToMM Symposium on Mechanisms, Machines, and Mechatronics, Montréal, Québec (12 pages). Lien externe
Bitar-Nehme, E. (2017). Modélisation des erreurs thermiques des machines-outils numériques à cinq-axes [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Bodkhe, S. (2017). Solvent Evaporation-Assisted Three-Dimensional Printing of Piezoelectric Sensors from Polyvinylidene Fluoride and its Nanocomposites [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Bodkhe, S., Noonan, C., Gosselin, F., & Therriault, D. (avril 2017). One-step piezoelectric sensors for smart textiles [Communication écrite]. 15th Expo Hightex, Montréal, Québec. Non disponible
Bodkhe, S., Noonan, C., Gosselin, F., & Therriault, D. (juillet 2017). Single-step 3D printed piezoelectric sensors for fluid flow and motion sensing [Communication écrite]. 54th Annual Technical Meeting of the Society of Engineering Science (SES 2017), Boston, United States. Non disponible
Bodkhe, S., Testoni, O., Gosselin, F., & Therriault, D. (octobre 2017). 3D printing active piezoelectric sensors in a single step [Communication écrite]. 8th New Mech, Boston, MA, USA. Non disponible
Bodkhe, S., Turcot, G., Gosselin, F., & Therriault, D. (2017). One-step solvent evaporation-assisted 3D printing of piezoelectric PVDF nanocomposite structures. ACS Applied Materials & Interfaces, 9(24), 20833-20842. Disponible
Bonnard, B., Causse, P., & Trochu, F. (2017). Experimental characterization of the pore size distribution in fibrous reinforcements of composite materials. Journal of Composite Materials, 51(27), 3807-3818. Lien externe
Bouchard, A. (2017). Wall Distance Evaluation Via Eikonal Solver for RANS Applications [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Boucher, J.-M., & Birglen, L. (2017). Performance augmentation of underactuated fingers' grasps using multiple drive actuation. Journal of Mechanisms and Robotics, 9(4), 10 pages. Lien externe
Boudreault, Y., Carré, C., Farand, P., Forest, L., Lafleur, P., & Ross, A. (2017). Différentes méthodes d'apprentissage actif pour une diversité d'apprenants. Proceedings of the Canadian Engineering Education Association (CEEA), 5 pages. Disponible
Bourgault-Côté, S., Ghasemi, S., Mosahebi, A., & Laurendeau, É. (2017). Extension of a two-dimensional Navier-Stokes solver for infinite swept flow. AIAA Journal, 55(2), 662-667. Lien externe
Bourgault-Cote, S., Hasanzadeh, K., & Laurendeau, É. (juillet 2017). Multi-layer icing methodologies for conservative ice growth [Communication écrite]. 7th European Conference for Aeronautics and Aerospace Science (EUCASS 2017), Milan, Italy (15 pages). Lien externe
Bousfia, M., Aboussaleh, M., Ouhbi, B., & Boukhili, R. (2017). Fatigue life prediction for composite materials under Ergodic Gaussian and Stationary Random (EGSR) loads. Composites: Mechanics, Computations, Applications, 8(3), 181-206. Lien externe
Bousquet-Jette, C., Achiche, S., Beaini, D., Cio, Y., Leblond-Menard, C., & Raison, M. (2017). Fast scene analysis using vision and artificial intelligence for object prehension by an assistive robot. Engineering Applications of Artificial Intelligence, 63, 33-44. Lien externe
Boyer, L. (2017). Analyse biomécanique de techniques de dérotation vertébrale pour la correction 3D de la scoliose lors de la chirurgie d'instrumentation postérieure du rachis [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Brazeau-Séguin, J., Lévesque, J., & Laberge Lebel, L. (avril 2017). Relating weaving parameters and 3D woven fabric design with a geometrical modelling approach [Communication écrite]. 3rd International Symposium on Automated Composites Manufacturing (ACM 2017), Montréal, Québec. Lien externe
Brideau, S. A., Beausoleil-Morrison, I., & Kummert, M. (août 2017). Experimental validation of above-floor tube-and-plate radiant floor model [Communication écrite]. 15th IBPSA Conference (Building Simulation 2017), San Francisco, CA. Lien externe
Bußler, M., Diehl, P., Pflüger, D., Frey, S., Sadlo, F., Ertl, T., & Schweitzer, M. A. (2017). Visualization of fracture progression in peridynamics. Computers & Graphics, 67, 45-57. Lien externe
Canals, L., & Lévesque, M. (2017). Vibratory peening for the fatigue life improvement of aerospace parts. Part I. (Rapport technique). Non disponible
Canals, L., & Lévesque, M. (2017). Vibratory peening for the fatigue life improvement of aerospace parts. Part II. (Rapport technique). Non disponible
Castro Moreno, A., Tu, F., Lévesque, M., & Bocher, P. (septembre 2017). Shot peening FEM simulation: A novel approach based on crystal plasticity [Communication écrite]. 13th International Conference on Shot Peening, Montréal, Québec. Lien externe
Cauchy, X., Sapieha, J.-E., & Therriault, D. (2017). Synthesis of highly conductive, uniformly silver coated carbon nanofibers by electroless deposition. ACS Applied Materials & Interfaces, 9(34), 29010-29020. Disponible
Chablat, D., Baron, L., & Jha, R. (août 2017). Kinematics and workspace analysis of a 3PPPS parallel robot with u-shaped base [Communication écrite]. International Design Engineering Technical Conferences / Computers and Information in Engineering Conference (IDETC/CIE 2017), Cleveland, OH. Lien externe
Chalhoub, M., Bernier, M., Coquet, Y., & Philippe, M. (2017). A simple heat and moisture transfer model to predict ground temperature for shallow ground heat exchangers. Renewable Energy, 103, 295-307. Lien externe
Chambon, R., Hébert, A., & Taforeau, J. (2017). Pin power reconstruction : a new capability in the DRAGON5-PARCS neutronic system. International Journal of Nuclear Energy Science and Technology, 11(2), 99-119. Lien externe
Chizari, K., Arjmand, M., Liu, Z., Sundararaj, U., & Therriault, D. (2017). Three-dimensional printing of highly conductive polymer nanocomposites for EMI shielding applications. Materials Today Communications, 11, 112-118. Disponible
Chouinard, U., Achiche, S., Bieze, T., Baron, L., & Duriez, C. (mai 2017). Analysing design modifications effects on the compliance of deformable hybrid serial-parallel manipulators [Communication écrite]. CCToMM Symposium on Mechanisms, Machine and Mechatronics, Montréal, Québec. Lien externe
Chouinard, U., Achiche, S., Leblond-Menard, C., & Baron, L. (août 2017). Assessment of dependencies in mechatronics conceptual design of a quadcopter drone using linguistic fuzzy variables [Communication écrite]. 21st International Conference on Engineering Design (ICED 2017), Vancouver, BC, Canada. Non disponible
Cimmino, M. (mars 2017). Examination of Ambient Temperature Variations Effects on Predicted Fluid Temperatures in Vertical Boreholes [Communication écrite]. IGSHPA Technical/Research Conference and Expo, Denver, Colorado. Lien externe
Cimmino, M., & Baliga, B. R. (2017). Evaluation of the interfacial conduction heat transfer coefficient in two-temperature macroscopic models of homogenous porous media using a fully developed unsteady microscopic model in periodic unit cells. Numerical Heat Transfer, Part B: Fundamentals, 71(3), 236-252. Lien externe
Cimmino, M., & Eslami Nejad, P. (2017). A simulation model for solar assisted shallow ground heat exchangers in series arrangement. Energy and Buildings, 157, 227-246. Lien externe
Cimmino, M., & Wetter, M. (mai 2017). Modelling of heat pumps with calibrated parameters based on manufacturer data [Communication écrite]. 12th International Modelica Conference, Prague, Czech. Lien externe
Cimmino, M., Eslami Nejad, P., & Hossatte-Ducassy, S. (mars 2017). Heat pump capacity effects on peak electricity consumption and total length of self and solar-assisted shallow ground heat exchanger networks [Communication écrite]. IGSHPA Technical/Research Conference and Expo, Denver, Colorado. Lien externe
Clement, J., Menard, J., Raison, M., Dumais, J., Dubois, L., & Rouleau, D. M. (2017). Three-dimensional analysis of the locked position in patients with recurrent shoulder instability. Journal of Shoulder Elbow Surgery, 26(3), 536-543. Lien externe
Cobetto, N., Aubin, C.-É., Parent, S., Barchi, S., Turgeon, I., & Labelle, H. (2017). 3D correction of AIS in braces designed using CAD/CAM and FEM: a randomized controlled trial. Scoliosis and Spinal Disorders, 12(1). Disponible
Cobetto, N., Aubin, C.-É., Parent, S., Barchi, S., Turgeon, I., & Labelle, H. (mai 2016). Assessment of a brace design approach combining CAD/CAM and numerical modeling for the brace treatment of adolescent idiopathic scoliosis [Communication écrite]. 13th International Conference on Conservative Management of Spinal Deformities and First Joint Meeting of the International Research Society on Spinal Deformities and the Society on Scoliosis Orthopaedic and Rehabilitation Treatment (SOSORT-IRSSD 2016), Banff, Alberta (43 pages). Publié dans Scoliosis and Spinal Disorders, 12(S1). Disponible
Cossin, M., Ross, A., & Gosselin, F. (2017). Making single-point aerial circus disciplines safer. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, 231(4), 362-373. Lien externe
Coulombe, C., Gamache, J.-F., Mohebbi, A., Chouinard, U., & Achiche, S. (août 2017). Applying robust design methodology to a quadrotor drone [Communication écrite]. 21st International Conference on Engineering Design (ICED 2017), Vancouver, BC. Non disponible
Courteau-Godmaire, H. (2017). Simulation numérique de la formation des défauts dans la région des inserts de panneaux sandwich [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Courtois, A., Marcin, L., Benavente, M., Ruiz, E., & Lévesque, M. (août 2017). Mechanical analysis and viscoelastic modeling of a 3D interlock woven composite [Communication écrite]. 21st International Conference on Composite Materials (ICCM 2017), Xi'an, China. Lien externe
Crouzat, S. (2017). Étude du décollement lagrangien dans les écoulements bidimensionnels instationnaires [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Dal Maso, F., Begon, M., & Raison, M. (2017). Methodology to customize maximal isometric forces for Hill-type muscle models. Journal of Applied Biomechanics, 33(1), 80-86. Lien externe
Dammak, H. (2017). Impact de la pression et de la température sur la performance d'un actionneur plasma de type DBD [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Daoud, H., Ezzati-Jivan, N., & Dagenais, M. (septembre 2017). Dynamic trace-based sampling algorithm for memory usage tracking of enterprise applications [Communication écrite]. 2017 IEEE High Performance Extreme Computing Conference, Waltham, MA, USA (7 pages). Disponible
De Kerret, F., Béguin, C., & Étienne, S. (2017). Two-phase flow pattern identification in a tube bundle based on void fraction and pressure measurements, with emphasis on churn flow. International Journal of Multiphase Flow, 94, 94-106. Lien externe
Delbergue, D., Lévesque, M., & Bocher, P. (septembre 2017). About the importance of X-ray elastic constant determination in the precise measurement of residual stress profiles [Communication écrite]. 13th International Conference on Shot Peening, Montréal, Québec. Lien externe
Delcroix, B., Kummert, M., & Daoud, A. (2017). Building-scale experimental validation of a new model for walls with phase change materials. Science and Technology for the Built Environment, 23(6), 1049-1062. Lien externe
Delcroix, B., Kummert, M., & Daoud, A. (2017). Development and numerical validation of a new model for walls with phase change materials implemented in TRNSYS. Journal of Building Performance Simulation, 10(4), 422-437. Lien externe
Delcroix, B., Leduc, M.-A., & Kummert, M. (2017). Modeling of a portable electric spa: Model development, experimental validation and application to winter demand response. Applied Thermal Engineering, 111, 183-192. Lien externe
Dellacherie, S., & Lafitte, O. (2017). A unidimensional explicit solution of a simplified model of thermohydraulic-neutron coupling stationary. Annales mathématiques du Québec, 41(2), 221-264. Lien externe
Delorme, R., Tabiai, I., Laberge Lebel, L., & Lévesque, M. (2017). Generalization of the ordinary state-based peridynamic model for isotropic linear viscoelasticity. Mechanics of Time-Dependent Materials, 21(4), 549-575. Lien externe
Demers, É. (2017). Le contrôle des inflexions et des extremums de courbure portés par les courbes et les surfaces B-Splines [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Deschênes, P. A., Lanteigne, J., Verreman, Y., Paquet, D., Lévesque, J. B., & Brochu, M. (2017). A new experimental method to study the influence of welding residual stresses on fatigue crack propagation. International Journal of Fatigue, 100, 444-452. Lien externe
Diehl, P., Tabiai, I., & Lévesque, M. (juillet 2017). Experimental validation of elastic state based peridynamic for PMMA and epoxy materials [Présentation]. Dans 14th U.S. National Congress on Computational Mechanics (USNCCM14), Montréal, Canada. Lien externe
Duivenvoorden, A., Kyungjin, L., Raison, M., & Achiche, S. (octobre 2017). Sensor fusion in upper limb area networks: a survey [Communication écrite]. Global Information Infrastructure and Networking Symposium (GIIS 2017), St. Pierre, France. Lien externe
Dupuis, S., Fortin, C., Caouette, C., & Aubin, C.-É. (mai 2016). Biomechanical modeling of global postural re-education and curve reducibility in physiotherapy treatment of adolescent idiopathic scoliosis [Communication écrite]. 13th International Conference on Conservative Management of Spinal Deformities and First Joint Meeting of the International Research Society on Spinal Deformities and the Society on Scoliosis Orthopaedic and Rehabilitation Treatment (SOSORT-IRSSD 2016), Banff, Alberta (43 pages). Publié dans Scoliosis and Spinal Disorders, 12(S1). Disponible
El Ouaaid, Z., Shirazi-Adl, A., & Plamondon, A. (mai 2017). Effects of hand-held loads at various orientations, heights and magnitudes on spine biomechanics in upright posture [Communication écrite]. 2nd International Workshop on Spine Loading and Deformation, Berlin, Germany. Lien externe
Ellyson, B., Brochu, M., & Brochu, M. (2017). Characterization of bending vibration fatigue of slm fabricated Ti-6Al-4V. International Journal of Fatigue, 99, 25-34. Lien externe
Ellyson, B., Chekir, N., Brochu, M., & Brochu, M. (2017). Characterization of bending vibration fatigue of WBD fabricated Ti-6A1-4V. International Journal of Fatigue, 101, 36-44. Lien externe
Elzein, B., Xing, J., Robert, É., & Montoya, N. (avril 2017). Burning Characteristics of Aluminized Solid Rocket Propellants with Bimodal Oxidizer Size Distribution [Communication écrite]. 2nd World Congress on Momentum, Heat and Mass Transfer (J'Y 2017), Barcelona, Spain (2 pages). Lien externe
Eskandari, A. H., Arjmand, N., Shirazi-Adl, A., & Farahmand, F. (2017). Subject-specific 2D/3D image registration and kinematics-driven musculoskeletal model of the spine. Journal of Biomechanics, 57, 18-26. Lien externe
Esmaeili-Marzdashti, S., Pirmohammad, S., & Esmaeili-Marzdashti, S. (2017). Crashworthiness analysis of S-shaped structures under axial impact loading. Latin American Journal of Solids and Structures, 14(5), 743-764. Disponible
Falsafioon, M., Arabi, S., Camarero, R., & Guibault, F. (2017). Unstructured grid smoothing for turbomachinery applications. International Journal of Fluid Machinery and Systems, 10(4), 421-431. Lien externe
Fareh, F., Demers, V., Demarquette, N. R., Turenne, S., & Scalzo, O. (2017). Influence of segregation on rheological properties of wax-based feedstocks. Powder Technology, 320, 273-284. Lien externe
Fattah-Alhosseini, A., Attarzadeh, F. R., Vafaeian, S., Haghshenas, M., & Keshavarz, M. K. (2017). Electrochemical behavior assessment of tantalum in aqueous KOH solutions. International Journal of Refractory Metals & Hard Materials, 64, 168-175. Lien externe
Faucheux, P. A., Gosselin, F., & Lévesque, M. (septembre 2017). Computing peening patterns for peen forming and distortion correction [Présentation]. Dans 13th International Conference on Shot Peening, Montréal, Québec. Non disponible
Fedorov, D., & Birglen, L. (2017). Design of a Self-Adaptive Robotic Leg Using a Triggered Compliant Element. IEEE Robotics and Automation Letters, 2(3), 1444-1451. Lien externe
Foroozmehr, F. (2017). Ductile Fracture of 13% Cr-4% Ni Martensitic Stainless Steels Used in Hydraulic Turbine Welded Runners [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Foroozmehr, F., Verreman, Y., Chen, J., Thibault, D., & Bocher, P. (2017). Effect of inclusions on fracture behavior of cast and wrought 13% Cr-4% Ni martensitic stainless steels. Engineering Fracture Mechanics, 175, 262-278. Lien externe
Fortier, V. (2017). Développement de rivets composite à matrice thermoplastique [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Fortier, V., Brunel, J.-E., & Laberge Lebel, L. (juillet 2017). Automated manufacturing of thermoplastic composite rivets [Communication écrite]. 10th Canadian-International Conference on Composites, Ottawa, Ont.. Non disponible
França, R., Alfa, M., Olson, N., Yahia, L., & Sacher, E. (2017). Characterization of endotoxins on orthopaedic fixation screws, using physicochemical surface analyses. Journal of Orthopaedic Research, 35(2), 240-247. Lien externe
Frigo, J. B., Béguin, C., Hay, A., Étienne, S., & Pelletier, D. (juin 2017). Spanwise force correlation of rotating square cylinders in three-dimensional cross-flow [Communication écrite]. 27th International Ocean and Polar Engineering Conference, San Francisco, California. Lien externe
Gagné-Boisvert, L. (2017). Amélioration de la conception de systèmes de pompes à chaleur géothermiques [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Gagné-Boisvert, L., & Bernier, M. (mars 2017). A Comparison of the Energy Use for Different Heat Transfer Fluids in Geothermal Systems [Communication écrite]. IGSHPA Technical/Research Conference and Expo 2017, Denver, Colorado. Lien externe
Gamdani, F., Boukhili, R., & Vadean, A. (août 2017). Tensile behavior of hybrid multi-bolted/bonded joints with carbon/epoxy composites [Communication écrite]. 21st International Conference on Composite Materials (ICCM 2017), Xi'an, China. Non disponible
Garcia-Duitama, J., Chayer, B., Garcia, D., Goussard, Y., & Cloutier, G. (2017). Protocol for Robust In Vivo Measurements of Erythrocyte Aggregation Using Ultrasound Spectroscopy. Ultrasound in Medicine & Biology, 43(12), 2871-2881. Lien externe
Gariépy, A., Miao, H. Y., & Lévesque, M. (2017). Simulation of the shot peening process with variable shot diameters and impacting velocities. Advances in Engineering Software, 114, 121-133. Lien externe
Gauthier, J. P., Giroux, A. M., Étienne, S., & Gosselin, F. (2017). A numerical method for the determination of flow-induced damping in hydroelectric turbines. Journal of Fluids and Structures, 69, 341-354. Lien externe
Gervais, B., Vadean, A., Brochu, M., & Raison, M. (juin 2017). Development of a Tool for the Sensitivity Analysis of Design Parameters of Femoral Implants in the Human Body During Gait [Communication écrite]. 8th ECCOMAS Thematic Conference on MULTIBODY DYNAMICS, Prague, République tchèque. Non disponible
Ghaedsharaf, M., Brunel, J.-E., & Laberge Lebel, L. (juillet 2017). Fiber-level bi-axial braid simulation for braid-trusion [Communication écrite]. 10th Canadian International Conference on Composites (CANCOM 2017), Ottawa, Ontario. Disponible
Ghezelbash, F., El Ouaaid, Z., Shirazi-Adl, A., Plamondon, A., & Arjmand, N. (mai 2017). Subject-specific regression equations to estimate spinal loads in symmetric lifting [Communication écrite]. 2nd International Workshop on Spine Loading and Deformation, Berlin, Germany. Lien externe
Ghezelbash, F., El Ouaaid, Z., Shirazi-Adl, A., Plamondon, A., & Arjmand, N. (mai 2017). Subject-specific validation of a trunk musculoskeletal model in maximum voluntary exertions [Communication écrite]. 2nd International Workshop on Spine Loading and Deformation, Berlin, Germany. Lien externe
Ghezelbash, F., Eskandari, A. H., Shirazi-Adl, A., Arjmand, N., El Ouaaid, Z., & Plamondon, A. (mai 2017). Effects of joint positioning and stiffness on spinal loads and kinematics in trunk musculoskeletal models [Communication écrite]. 2nd International Workshop on Spine Loading and Deformation, Berlin, Germany. Lien externe
Ghezelbash, F., Shirazi-Adl, A., Plamondon, A., Arjmand, N., & Parnianpour, M. (2017). Obesity and Obesity Shape Markedly Influence Spine Biomechanics: A Subject-Specific Risk Assessment Model. Annals of Biomedical Engineering, 45(10), 2373-2382. Lien externe
Gosselin, F., Zou, S., & Therriault, D. (août 2017). Failure mechanisms of instability-assisted 3D printed microstructured fibers [Communication écrite]. 21st International Conference on Composite Materials (ICCM 2017), Xi'an, China. Lien externe
Greganti, A. (2017). Validation of an Isotope Evolution Model for Apollo3 Calculations in SFR Core [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Grozdanov, A. (2017). Transonic Static Aeroelasticity Using the 2.5D Nonlinear Vortex Lattice Method [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Grozdanov, A., & Laurendeau, É. (juin 2017). Transonic aeroelasticity using the 2.5d non-linear vortex-lattice method [Communication écrite]. 17th International Forum on Aeroelasticity and Structural Dynamics (IFASD 2017), Como, Italy. Non disponible
Gu, X. (2017). Lift Alteration at Low Angle of Attack Using Plasma Actuation [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Guay, J. (2017). Extension of the Overset Grid Preprocessor for Surface Conforming Meshes [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Hachem, B., Aubin, C.-É., & Parent, S. (2017). Porcine spine finite element model: a complementary tool to experimental scoliosis fusionless instrumentation. European Spine Journal, 26(6), 1610-1617. Lien externe
Hasanzadeh, K., Laurendeau, É., Castonguay, P., & Leblond, D. (juin 2017). A framework for multi-block structured grid smoothing algorithms for aircraft configurations [Communication écrite]. 23rd AIAA Computational Fluid Dynamics Conference, 2017, Denver, CO, United states. Lien externe
Hashemiboroujeni, H. (2017). A New 3D Artefact For Five-Axis Machine Tool Coordinate Measuring Performance [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Hassani, M., Laurin, S. M., Mureithi, N. W., & Gosselin, F. (2017). Bending and torsional reconfiguration of chiral rods under wind and gravity. Extreme Mechanics Letters, 13, 91-99. Lien externe
Hassanipour, M. (2017). Fatigue Crack Propagation Under Variable Amplitude Loading in Steels Used in Francis Turbine Runners [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Hassanipour, M., Verreman, Y., & Lanteigne, J. (2017). Fatigue threshold at high stress ratio under periodic underloads in turbine runner steels. International Journal of Fatigue, 103, 264-271. Lien externe
Hébert, A. (2017). Acceleration of step and linear discontinuous schemes for the method of characteristics in DRAGON5. Nuclear Engineering and Technology, 49(6), 1135-1142. Disponible
Hébert, A. (avril 2017). A Proposal Beyond the Wims Library Update Project [Communication écrite]. International Conference on Mathematics & Computational Methods Applied to Nuclear Science & Engineering (M&C 2017), Jeju, Korea. Non disponible
Hély, C., Birglen, L., & Xie, W.-F. (2017). Feasibility study of robotic fibre placement on intersecting multi-axial revolution surfaces. Robotics and Computer-Integrated Manufacturing, 48, 73-79. Lien externe
Hérard, C. (2017). Les effets de la température lors de la fabrication additive par FDM de composites thermoplastiques renforcés et leurs propriétés mécaniques [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Huang, C.-W., Baron, L., Balazinski, M., & Achiche, S. (2017). Comprehensive model optimization in pulp quality prediction: A machine learning approach. PeerJ Preprints, 5, e2949v1. Lien externe
Imani, R. J., & Robert, É. (2017). Estimation of acoustic forces on submicron aerosol particles in a standing wave field. Aerosol Science and Technology, 52(1), 57-68. Lien externe
Jai, O., El Hajjaji, O., Hébert, A., Tajmouati, J., El Bardouni, T., & Didi, A. (2017). Validation study of the reactor physics lattice transport code DRAGON5 based on DRAGLIB libraries by TRX and BAPL critical experiments of light water reactors for neutronic analysis of TRIGA MARK-II research reactor. Moscow University Physics Bulletin, 72(6), 633-637. Lien externe
Javadi, H., Jomaa, W., Texier, D., Brochu, M., & Bocher, P. (juillet 2016). Surface roughness effects on the fatigue behavior of as-machined inconel 718 [Communication écrite]. 8th International Conference on Materials Structure and Micromechanics of Fracture (MSMF 2017), Brno, Czech republic. Lien externe
Jost, T., Pelzmann, T., Schwinzerl, M., Walter, M., Schonhuber, M., & Floury, N. (mars 2017). Using Airborne Measurements to Model the Satellite-to-Aircraft Channel Model at L-Band [Communication écrite]. 11th European Conference on Antennas and Propagation (EUCAP 2017), Paris, France. Lien externe
Karaki, M., Hallal, A., Younes, R., Trochu, F., & Lafon, P. (2017). In-plane permeability prediction model for non-crimp and 3D orthogonal fabrics. Journal of the Textile Institute, 109(8), 1110-1126. Lien externe
Karaki, M., Hallal, A., Younes, R., Trochu, F., Lafon, P., Hayek, A., Kobeissy, A., & Fayad, A. (2017). A comparative analytical, numerical and experimental analysis of the microscopic permeability of fiber bundles in composite materials. International Journal of Composite Materials, 7(3), 82-102. Lien externe
Keivanpour, S., Ait-Kadi, D., & Mascle, C. (2017). Automobile manufacturers' strategic choice in applying green practices: joint application of evolutionary game theory and fuzzy rule-based approach. International Journal of Production Research, 55(5), 1312-1335. Lien externe
Keivanpour, S., Kadi, D. A., & Mascle, C. (2017). End-of-life aircraft treatment in the context of sustainable development, lean management, and global business. International Journal of Sustainable Transportation, 11(5), 357-380. Lien externe
Khalifeh, E., Piollet, E., Millecamps, A., & Batailly, A. (juin 2017). Non-Linear Modeling Of Centrifugal Stiffening Effects For Accurate Bladed Component Reduced-Order Models [Communication écrite]. ASME Turbo Expo: Turbine Technical Conference and Exposition (ASME Turbo Expo 2017), Charlotte, NC (10 pages). Lien externe
Khameneifar, F., & Feng, H.-Y. (2017). Establishing a balanced neighborhood of discrete points for local quadric surface fitting. Computer-Aided Design, 84, 25-38. Lien externe
Khameneifar, F., & Feng, H.-Y. (2017). Extracting sectional contours from scanned point clouds via adaptive surface projection. International Journal of Production Research, 55(15), 4466-4480. Lien externe
Khameneifar, F., & Feng, H.-Y. (mai 2017). Section-specific inspection of free-form surfaces via optical 3D scanning [Communication écrite]. 6th International Conference on Virtual Machining Process Technology (VMPT 2017), Montréal, Québec. Non disponible
Klotz, T., Blas, S., Lévesque, M., & Brochu, M. (2017). 1D cyclic yield model independent of load spectrum characteristics and its application to Inconel 718. Mechanics of Materials, 109, 34-41. Lien externe
Klotz, T., Delbergue, D., Miao, H. Y., Bocher, P., Lévesque, M., & Brochu, M. (septembre 2017). Analytical fatigue life prediction of shot peened Inconel 718 [Présentation]. Dans 13th International Conference on Shot Peening, Montréal, Québec. Lien externe
Kreitcberg, A., Brailovski, V., & Turenne, S. (juin 2017). The build orientation-dependent ductility of IN625 alloy processed by laser powder-bed fusion [Communication écrite]. 14th International Conference on Fracture (ICF 2017), Rhodes, Greece. Non disponible
Kreitcberg, A., Brailovski, V., & Turenne, S. (2017). Effect of heat treatment and hot isostatic pressing on the microstructure and mechanical properties of Inconel 625 alloy processed by laser powder bed fusion. Materials Science and Engineering: A, 689, 1-10. Lien externe
Kreitcberg, A., Brailovski, V., & Turenne, S. (2017). Elevated temperature mechanical behavior of IN625 alloy processed by laser powder-bed fusion. Materials Science and Engineering A, 700, 540-553. Lien externe
Kreitcberg, A., Brailovski, V., Turenne, S., Chanal, C., & Urlea, V. (mai 2016). Influence of thermo- and HIP treatments on the microstructure and mechanical properties of IN625 alloy parts produced by selective laser melting: A comparative study [Communication écrite]. 9th International Conference on Processing and Manufacturing of Advanced Materials (THERMEC 2016), Graz, Austria. Lien externe
Laberge Lebel, L. (juillet 2017). Thermoplastic composite fasteners for composite structures [Communication écrite]. 3rd Joint Turkey-Japan Workshop on Polymeric Composite Materials and 22nd Society for Automotive Composites Symposium, Kyoto, Japan. Non disponible
Lacombe, F. (2017). Vérification et validation d'une loi de paroi consistante du modèle de turbulence K-w SST [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Lainé, J. (2017). Optimisation d'aubes de turbomachines : minimisation de la réponse vibratoire à la suite de contacts avec le carter [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Lakis, A. A., & Trinh, N. D. (2017). Liquid phase velocity in turbulent flow of a water/dispersed bubble mixture in large diameter horizontal pipes. European Journal of Engineering and Technology, 5(1), 62-89. Lien externe
Lakis, A. A., Kerboua, Y., & Toorani, M. (juin 2017). Aeroelastic analysis of combined conical-cylindrical shells [Communication écrite]. 7th International Conference on Mechanics and Materials in Design (M2D 2017), Albufeira, Portugal. Lien externe
Lakis, A. A., Sabri, F., & Toorani, M. (juillet 2017). A semi-analytical method in supersonic flutter analysis of fluid-filled truncated conical shells [Communication écrite]. International Conference on Structural Engineering Dynamics (ICEDyn 2017), Ericeira, Portugal. Non disponible
Lapointe, F. (2017). Fabrication de composites carbone/PEEK par la pultrusion multi-filière assistée par le vide [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Larochelle, J. S., Desilets-Benoit, A., Borduas, G., Laliberte-Riverin, S., Roorda, S., & Brochu, M. (2017). Hydrogen loss during N-15 nuclear reaction analysis of high strength steel. Nuclear Instruments & Methods in Physics Research. Section B, Beam Interactions With Materials and Atoms, 409, 343-346. Lien externe
Lavoie, P. (2017). Modeling of Thin Water Films on Swept Wings in Icing Condition [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Law-Kam Cio, Y.-S. (2017). Asservissement d'un bras robotique d'assistance à l'aide d'un système de stéréo vision artificielle et d'un suiveur de regard [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Le Naveaux, F., Aubin, C.-É., Parent, S., Newton, P. O., & Labelle, H. (2017). 3D rod shape changes in adolescent idiopathic scoliosis instrumentation: how much does it impact correction? European Spine Journal, 26(6), 1676-1683. Lien externe
Le Navéaux, F., Labelle, H., Parent, S., Newton, P. O., & Aubin, C.-É. (2017). Are There 3D Changes in Spine and Rod Shape in the 2 Years After Adolescent Idiopathic Scoliosis Instrumentation? Spine, 42(15), 1158-1164. Lien externe
LeBel, F., Ruiz, E., & Trochu, F. (2017). Experimental study of saturation by visible light transmission in dual-scale fibrous reinforcements during composite manufacturing. Journal of Reinforced Plastics and Composites, 36(23), 1693-1711. Lien externe
LeBel, F., Ruiz, E., & Trochu, F. (2017). Void content analysis and processing issues to minimize defects in liquid composite molding. Polymer Composites, 40(1), 109-120. Lien externe
Lebel, L., Turenne, S., & Boukhili, R. (2017). An experimental apparatus and procedure for the simulation of thermal stresses in gas turbine combustion chamber panels made of ceramic matrix composites. Journal of Engineering for Gas Turbines and Power, 139(9), 11 pages. Lien externe
Leclaire, S., Parmigiani, A., Chopard, B., & Latt, J. (2017). Three-dimensional lattice Boltzmann method benchmarks between color-gradient and pseudo-potential immiscible multi-component models. International Journal of Modern Physics C, 28(7), 30 pages. Lien externe
Leroux, M. (2017). Design d'un manipulateur robotique à architecture anthropomorphique [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Leroux, M., Achiche, S., & Raison, M. (2017). Assessment of accuracy for target detection in 3D-space using eye tracking and computer vision. PeerJ Preprints, 5, e2718v1. Lien externe
Leroux, M., Achiche, S., & Raison, M. (août 2017). Design guidelines for shoulder design of an anthropomorphic robotic ARM [Communication écrite]. 21st International Conference on Engineering Design (ICED 2017), Vancouver, BC, Canada. Non disponible
Li, H., & Mureithi, N. W. (2017). Development of a time delay formulation for fluidelastic instability model. Journal of Fluids and Structures, 70, 346-359. Lien externe
Liponi, L., Taforeau, J., & Hébert, A. (avril 2017). Calculation and Verification of Assembly Discontinuity Factors for the DRAGON/PARCS code sequence [Communication écrite]. International Conference on Mathematics & Computational Methods Applied to Nuclear Science & Engineering (M&C 2017), Jeju, Korea. Non disponible
Los, A. (2017). Uncertainty Estimation in Indirect Calibration of Five-Axis Machine Tools [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Luk-Cyr, J. (2017). Analyse et implantation d'un outil d'optimisation numérique des paramètres de martelage [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Luk-Cyr, J., Paquet, D., Lanteigne, J., Champliaud, H., & Vadean, A. (2017). A unified plasticity methodology for rate- and temperature-sensitive alloys exhibiting a non-linear kinematic hardening behaviour. Acta Mechanica Solida Sinica, 30(1), 27-37. Lien externe
Ma, X., Pellerin, N., Reggio, M., & Bennacer, R. (2017). Study on an antagonist differentiated heated lid driven-cavity enclosing a tube: Lattice Boltzmann method. EPJ Applied Physics, 78(3), 10 pages. Lien externe
Madra, A. (2017). Analyse et visualisation de la géométrie des matériaux composites à partir de données d'imagerie 3D [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Madra, A., Adrien, J., Breitkopf, P., Maire, E., & Trochu, F. (2017). A clustering method for analysis of morphology of short natural fibers in composites based on X-ray microtomography. Composites Part A: Applied Science and Manufacturing, 102, 184-195. Lien externe
Madra, A., Breitkopf, P., & Trochu, F. (août 2017). Automatic detection and classification of defects in woven composites manufactured by RTM based on X-ray microtomography [Communication écrite]. 21st International Conference on Composite Materials (ICCM 2017), Xi'an, China. Non disponible
Madra, A., Breitkopf, P., Rassineux, A., & Trochu, F. (2017). Image-based model reconstruction and meshing of woven reinforcements in composites. International Journal for Numerical Methods in Engineering, 112(9), 1235-1252. Lien externe
Madra, A., Trochu, F., & Breitkopf, P. (mai 2017). Implicit kriging model of fibrous reinforcements in composites based on X-ray microtomography [Communication écrite]. 13e Colloque national en calcul des structures (CSMA 2017), Giens, France (5 pages). Non disponible
Magnain, B., Batailly, A., & Florentin, E. (2017). Adaptive reduced basis strategy dedicated to the solution of nonstationary stochastic thermal problems. Computers & Structures, 182, 491-503. Lien externe
Marouane, H. (2017). Biomécanique de l'articulation du genou humain durant la marche - un modèle musculosquelettique hybride [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Marouane, H., & Shirazi-Adl, A. (mars 2017). Changes in knee adduction rotation and not adduction moment influence joint compartmental load partitioning [Affiche]. ORS 2017 Annual Meeting, San Diego,California. Non disponible
Marouane, H., Shirazi-Adl, A., & Adouni, M. (2017). 3D active-passive response of human knee joint in gait is markedly altered when simulated as a planar 2D joint. Biomechanics and Modeling in Mechanobiology, 16(2), 693-703. Lien externe
Marouene, A., Legay, P., & Boukhili, R. (2017). Experimental and numerical investigation on the open-hole compressive strength of AFP composites containing gaps and overlaps. Journal of Composite Materials, 51(26), 3631-3646. Lien externe
Marten, D., Lennie, M., Pechlivanoglou, G., Paschereit, C. O., Dy, N. V., Paraschivoiu, I., & Saeed, F. (janvier 2017). Validation and comparison of a newly developed aeroelastic design code for VAWT [Communication écrite]. 35th Wind Energy Symposium, Reston, VA, USA (16 pages). Lien externe
Mascle, C. (août 2017). Design for complex product rebirth or how to protect resources [Communication écrite]. 21st International Conference on Engineering Design (ICED 2017), Vancouver, BC, Canada. Non disponible
Mayer, J. R. R. (2017). Optical encoder displacement sensors. Dans Measurement, Instrumentation, and Sensors Handbook : Spatial, Mechanical, Thermal, and Radiation Measurement (2e éd., p. 30-1). Lien externe
Mayer, J. R. R., & Hashemiboroujeni, H. (2017). A ball dome artefact for coordinate metrology performance evaluation of a five axis machine tool. CIRP Annals - Manufacturing Technology, 66(1), 479-482. Lien externe
Mazaheri, A., Trépanier, J.-Y., Camarero, R., & Roubin-Jouan, P. (2017). An efficient implementation of the finite-volume method for the solution of radiation transport in circuit breakers. Plasma Physics and Technology, 4(2), 177-181. Lien externe
Miao, H. Y., & Lévesque, M. (2017). Fatigue life improvement on AA7050 by vibratory peening and shot peening. (Rapport technique). Non disponible
Miao, H. Y., Canals, L., McGilivray, B., & Lévesque, M. (septembre 2017). Comparison between vibratory peening and shot peening process [Présentation]. Dans 13th International Conference of Shot Peening, Montréal, Québec. Lien externe
Miao, H. Y., Klotz, T., Delbergue, D., & Lévesque, M. (septembre 2017). Finite element simulation of shot peened residual stress relaxation under low and high cycle loading [Présentation]. Dans 13th International Conference of Shot Peening, Montréal, Québec. Lien externe
Miao, H. Y., Méndez, J., Forgues, S., & Lévesque, M. (septembre 2017). Experimental and numerical study of needle peening effects in aluminum alloy 2024-T3 sheets [Présentation]. Dans 13th International Conference of Shot Peening, Montréal, Québec. Lien externe
Miao, H., Tu, F., Delbergue, D., Bianchetti, C., Klotz, T., Bag, A., & Lévesque, M. (septembre 2017). Shot peening DEM-FEM simulation considering shot stream expansion, peening intensity and target materials [Communication écrite]. 13th International Conference of Shot Peening, Montréal, Québec. Lien externe
Mohammadian, N. (2017). Surface Finish Control of Inconel 625 Components Produced by Additive Manufacturing Using Combined Chemical-Abrasive Flow Polishing [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Mohebbi, A. (2017). Concurrent, Integrated and Multicriteria Design Support for Mechatronic Systems [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Mohebbi, A., Coulombe, C., Baron, L., & Achiche, S. (mai 2017). A fuzzy-based approach towards conceptual design improvements for mechatronics systems [Communication écrite]. CCToMM Symposium on Mechanisms, Machine and Mechatronics, Montréal, Québec. Lien externe
Mohebbi, A., Gallacher, C., Harrison, J., Willes, J., & Achiche, S. (août 2017). Integrated structure-control design optimization of an unmanned quadrotor helicopter (UGH) for object grasping and manipulation [Communication écrite]. 21st International Conference on Engineering Design (ICED 2017), Vancouver, BC, Canada. Non disponible
Monnot, P. (2017). Tressage robotisé de préformes pour des structures primaires d'aéronefs en composites [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Monnot, P., Lévesque, J., & Laberge Lebel, L. (2017). Automated braiding of a complex aircraft fuselage frame using a non-circular braiding model. Composites Part A: Applied Science and Manufacturing, 102, 48-63. Lien externe
Monnot, P., Lévesque, J., & Laberge Lebel, L. (avril 2017). Automated braiding of non-axisymmetric structures [Communication écrite]. 3rd International Symposium on Automated Composites Manufacturing (ACM 2017), Montréal, Québec. Lien externe
Monnot, P., Levesque, J., Dubé, R., & Laberge Lebel, L. (juillet 2017). Complex aircraft fuselage frame manufacturing using automated braiding and infusion [Communication écrite]. 10th Canadian-International Conference on Composites, Ottawa, Ont.. Non disponible
Morada, G. (2017). Experimental and Numerical Analysis of Impact Damage Progression in Sandwich Structures Designated for Stay Vane Extensions in Hydraulic Turbines [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Morada, G., Ouadday, R., Vadean, A., & Boukhili, R. (2017). Low-velocity impact resistance of ATH/epoxy core sandwich composite panels: Experimental and numerical analyses. Composites Part B: Engineering, 114, 418-431. Lien externe
Morada, G., Vadean, A., & Boukhili, R. (2017). Failure mechanisms of a sandwich beam with an ATH/epoxy core under static and dynamic three-point bending. Composite Structures, 176, 281-293. Lien externe
Mosahebi, A., & Laurendeau, É. (2017). A thorough study on the temporal accuracy of ALE-URANS solvers with and without respecting geometric conservation law. Journal of Aerospace Engineering and Mechanics, 1(2), 99-109. Non disponible
Muller, É. (2017). Application de modèles de turbulence à deux équations à la résolution éléments finis d'écoulements instationnaires [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Neveu, M. (2017). Vérification de la méthode de Boltzmann sur réseau en vue de calculer la perméabilité de milieux poreux [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Niknam, S. A., Balazinski, M., & Songmene, V. (2017). To characterize and optimize the surface quality attributes in slot milling operation. International Journal of Advanced Manufacturing Technology, 97(1-4), 727-746. Lien externe
Nyssen, F., & Batailly, A. (décembre 2017). Investigations on thermo-mechanical modeling of abradable coating in the context of rotor/stator interactions [Communication écrite]. 17th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC 2017), Maui, HI, United states. Non disponible
Olala, S., & Mureithi, N. W. (2017). Prediction of streamwise fluidelastic instability of a tube array in two-phase flow and effect of frequency detuning. Journal of Pressure Vessel Technology, 139(3), 15 pages. Lien externe
Ortiz-Vidal, L. E., Mureithi, N. W., & Rodriguez, O. M. H. (2017). Vibration response of a pipe subjected to two-phase flow: Analytical formulations and experiments. Nuclear Engineering and Design, 313, 214-224. Lien externe
Paltrinieri, J., Nyssen, F., Parent, M.-O., & Batailly, A. (juin 2017). Towards Full 3d Numerical Simulation Of Whirl Motions Stemming From Unilateral Contact Constraints In Aircraft Engines [Communication écrite]. ASME Turbo Expo: Turbine Technical Conference and Exposition (ASME Turbo Expo 2017), Charlotte, NC (10 pages). Lien externe
Parenteau, M. (2017). Aerodynamic Optimization of Aircraft Wings Using a Coupled VLM-2.5D RANS Approach [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Parenteau, M., Plante, F., Laurendeau, É., & Costes, M. (janvier 2017). Unsteady coupling algorithm for lifting-line methods [Communication écrite]. 55th AIAA Aerospace Sciences Meeting, Grapevine, Texas. Lien externe
Pea, R. (2017). Reconstruction simplifiée du tronc pour le traitement de la scoliose idiopathique par corset [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Pellerin, N. (2017). Simulation d'écoulements turbulents sur profils d'ailes au moyen de la méthode de Boltzmann sur réseau [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Pellerin, N., Leclaire, S., & Reggio, M. (2017). Solving incompressible fluid flows on unstructured meshes with the lattice Boltzmann flux solver. Engineering Applications of Computational Fluid Mechanics, 11(1), 310-327. Lien externe
Pernaudat, G. (2017). Une approche multi-physiques et multi-échelles pour l'amélioration de l'efficacité de la modélisation et de la simulation des disjoncteurs haute-tension [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Pettigrew, M. J., Yetisir, M., Fisher, N. J., Smith, B. A. W., Taylor, C. E., & Janzen, V. P. (juillet 2017). Fretting-wear damage due to vibration in nuclear and process equipment [Communication écrite]. ASME 2017 Pressure Vessels and Piping Conference (PVP 2017), Waikoloa, HI (11 pages). Lien externe
Pinard, P.-F. (2017). Effet du chargement sur la précision d'une machine-outils cinq-axes [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Plante, F. (2017). Simulation de phénomènes instationnaires périodiques avec une méthode RANS dans le domaine fréquentiel [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Plante, F., Laurendeau, É., Dandois, J., & Sartor, F. (juin 2017). Study of three-dimensional transonic buffet on swept wings [Communication écrite]. 35th AIAA Applied Aerodynamics Conference 2017, Denver, CO, United states (17 pages). Lien externe
Ponnada, S. M. R. (2017). Response of Composite Panels with Conductive Coatings Submitted to Emulated Lightning Strikes [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Pouliot Laforte, L., & Laberge Lebel, L. (avril 2017). Study of bi-experiment inverse method for thermal characterization of fiber-reinforced composites [Communication écrite]. 3rd International Symposium on Automated Composites Manufacturing (ACM 2017), Montréal, Québec. Lien externe
Prabha, H., Karthikeyan, R., Lajoie, M.-A., Marleau, G., & Hébert, A. (2017). Multiplication factors of single pin hexagonal cells and VVER-1000 reactor assembly. Annals of Nuclear Energy, 109, 720-725. Lien externe
Provencher, P. (2017). Supporting Production from a Single Surface Roughness Profile [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Pupin, C. (2017). Développement d'outils de prévision de la porosité résiduelle d'origine chimique destinés à l'optimisation des paramètres de fabrication de pièces composites structurales en RTM [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Pupin, C., Ross, A., Dubois, C., Rietsch, J.-C., & Ruiz, E. (2017). Predicting porosity formation in phenolic resins for RTM manufacturing: The porosity map. Composites Part A: Applied Science and Manufacturing, 100, 294-304. Lien externe
Pupin, C., Ross, A., Dubois, C., Rietsch, J.-C., Vernet, N., & Ruiz, E. (2017). Formation and suppression of volatile-induced porosities in an RTM epoxy resin. Composites Part A: Applied Science and Manufacturing, 94, 146-157. Lien externe
Rafiq, A., Merah, N., Boukhili, R., & Al-Qadhi, M. (2017). Impact resistance of hybrid glass fiber reinforced epoxy/nanoclay composite. Polymer Testing, 57, 1-11. Lien externe
Raison, M. (novembre 2017). Assistive robotics : a review of advancements and perspective [Communication écrite]. Annual Symposium of the IEEE EMBS - Benelux Chapter, Brussels, Belgium. Non disponible
Raison, M. (2017). Method and system for decomposing superimposed ground reaction forces into individual force profiles. (Brevet no US9579044). Lien externe
Raison, M. (mai 2017). La robotique en réadaptation pédiatrique [Robotics in pediatric rehabilitation]. [Présentation]. Dans 2nd Québec Congress in Adaptation-Rehabilitation Research, Montréal, Québec, Canada. Non disponible
Raison, M., Bougrinat, Y., Blanchet, L., Barron, O., & Achiche, S. (juillet 2017). Perspective talk : Will the assistive exoskeletons of the future be biomimetic? [Présentation]. Dans 23rd Congress of the European Society of Biomechanics (ESB 2017), Sevilla, Spain. Lien externe
Rak, M., & Ratajczyk, E. (2017). Coordinate measuring arms – different methods of points collection. Mechanik, 90(12), 1168-1171. Disponible
Ramananarivo, M., Raison, M., Barron, O., & Achiche, S. (août 2017). Biofidelic design of the forearm of a myoelectric prosthesis with maximum functional volume [Communication écrite]. 21st International Conference on Engineering Design (ICED 2017), Vancouver, BC, Canada. Non disponible
Raouafi, S., Achiche, S., Begon, M., Sarcher, A., & Raison, M. (2017). Classification of upper limb disability levels of children with spastic unilateral cerebral palsy using K-means algorithm. Medical and Biological Engineering and Computing, 56(1), 49-59. Lien externe
Raux, T. (2017). Étude de conditions limites de sortie pour la méthode des éléments finis [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Rebhi, R., Mamou, M., & Vasseur, P. (2017). Bistability and hysteresis induced by form drag in nonlinear subcritical and supercritical double-diffusive Lapwood convection in shallow porous enclosures. Journal of Fluid Mechanics, 812, 463-500. Lien externe
Reitmaier, S., Graichen, F., Shirazi-Adl, A., & Schmidt, H. (2017). Separate the Sheep from the Goats: Use and Limitations of Large Animal Models in Intervertebral Disc Research. Journal of Bone & Joint Surgery, 99(19), e102-e102. Lien externe
Rimpault, X., Chatelain, J. F., Sapieha, J.-E., & Balazinski, M. (2017). Tool wear and surface quality assessment of CFRP trimming using fractal analyses of the cutting force signals. CIRP Journal of Manufacturing Science and Technology, 16, 72-80. Lien externe
Rimpault, X., Chatelain, J.-F., Sapieha, J.-E., & Balazinski, M. (2017). Burr height monitoring while drilling CFRP/titanium/aluminium stacks. Mechanics and Industry, 18(1), 11 pages. Lien externe
Robin-Jouan, P., Bousoltane, K., Kieffel, Y., Trépanier, J.-Y., Camarero, R., Arabi, S., & Pernaudat, G. (2017). Analysis of last development results for high voltage circuit-breakers using new G³ gas. Plasma Physics and Technology Journal, 4(2), 157-160. Lien externe
Samadi, B., Raison, M., Ballaz, L., & Achiche, S. (2017). Decomposition of three-dimensional ground-reaction forces under both feet during gait. Journal of Musculoskeletal & Neuronal Interactions, 17(4), 283-291. Lien externe
Sarcher, A., Brochard, S., Raison, M., Leboeuf, F., Hug, F., Perrouin-Verbe, B., & Gross, R. (2017). Upper limb co-activation in typically developing children and in children with unilateral cerebral palsy: reliability and sensitivity to the EMG normalization technique. Gait & Posture, 57, 285-286. Lien externe
Sarcher, A., Raison, M., Leboeuf, F., Perrouin-Verbe, B., Brochard, S., & Gross, R. (2017). Pathological and physiological muscle co-activation during active elbow extension in children with unilateral cerebral palsy. Lien externe
Segovia, A. (2017). Guide d'utilisation des capteurs Trigno IM dans un contexte de réadaptation des membres supérieurs avec le REA plan. (Rapport de stage - Cycles supérieurs). Disponible
Shamsi, M.B., Sarrafzadeh, J., Jamshidi, A., Arjmand, N., & Ghezelbash, F. (2017). Comparison of spinal stability following motor control and general exercises in nonspecific chronic low back pain patients. Clinical Biomechanics, 48, 42-48. Lien externe
Sharifi, M., Shirazi-Adl, A., & Marouane, H. (2017). Computational stability of human knee joint at early stance in Gait: Effects of muscle coactivity and anterior cruciate ligament deficiency. Journal of Biomechanics, 63(Supplement), 110-116. Lien externe
Sharifi, M., Shirazi-Adl, A., & Marouane, H. (mars 2017). Knee joint stability and muscle coactivation: A novel hybrid musculoskeletal model study in gait [Affiche]. ORS 2017 Annual Meeting, San Diego,California. Non disponible
Shen, J., Kadoury, S., Labelle, H., Roy-Beaudry, M., Aubin, C.-É., & Parent, S. (2017). Geometric Torsion in Adolescent Idiopathic Scoliosis: A New Method to Differentiate Between Lenke 1 Subtypes. Spine, 42(9), E532-E538. Lien externe
Souleimani, Y. (2017). New Strategies for Desensitizing Aero-Engine Axial Compressor Performance and Stability to Tip Clearance Increase [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Tabiai, I. (2017). Pmma Tensile Test Until Failure, Loaded In Force [Ensemble de données]. Lien externe
Tenni, B., Godin, S., Thibault, D., & Brochu, M. (juin 2017). Shielding gas and oxide content effects on impact properties of 410NiMo steel weldments [Communication écrite]. 14th International Conference on Fracture (ICF 2017), Rhodes, Greece. Lien externe
Tinoco, E. N., Brodersen, O., Keye, S., Laflin, K., Feltrop, E., Vassberg, J. C., Mani, M., Rider, B., Wahls, R. A., Morrison, J. H., Hue, D., Gariépy, M., Roy, C. J., Mavriplis, D. J., & Murayama, M. (janvier 2017). Summary of data from the Sixth AIAA CFD Drag Prediction Workshop: CRM cases 2 to 5 [Communication écrite]. 55th AIAA Aerospace Sciences Meeting, Grapevine, Texas. Lien externe
Toche Fumchum, L. B. (2017). Set-Based Prototyping in the Context of the Configurable Virtual Product: The Construction of the Learning Value Streams (LVS) Model [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Tu, F., Delbergue, D., Miao, H., Klotz, T., Brochu, M., Bocher, P., & Lévesque, M. (2017). A sequential DEM-FEM coupling method for shot peening simulation. Surface and Coatings Technology, 319, 200-212. Lien externe
Tu, F., Ling, D., Hu, C., & Zhang, R. (2017). DEM-FEM analysis of soil failure process via the separate edge coupling method. International Journal for Numerical and Analytical Methods in Geomechanics, 41(9), 1157-1181. Lien externe
Vafaeian, S., Fattah-alhosseini, A., Keshavarz, M. K., & Mazaheri, Y. (2017). Simultaneous Investigation of the Effect of Advanced Thermomechanical Treatment and Repetitive Cyclic Voltammetry on the Electrochemical Behavior of AISI 430 Ferritic Stainless Steel. Journal of Materials Engineering and Performance, 26(188), 676-684. Lien externe
Van Rooijen, W. F. G., Khan, M. J. H., Hébert, A., & Salino, V. (2017). Analysis of a VVER-1000 in-core fuel management benchmark with DRAGON and DONJON. International Journal of Nuclear Energy Science and Technology, 11(4), 345-376. Lien externe
Vidal, D., Belot, I., Hayes, R., Setten, B., Votsmeier, M., & Bertrand, F. (septembre 2017). Numerical Investigation of the Impact of Washcoat Deposition on the Performance of Particulate Filters [Présentation]. Dans 5th International Symposium on Modeling of Exhaust-Gas After-Treatment (MODEGAT V), Bad Herrenalb, Germany. Non disponible
Vuillon, V. (2017). Optimisation par éléments finis de la géométrie de poutres en acier laminées à froid utilisées dans la construction de bâtiments [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Wagnac, E., Aubin, C.-É., Chaumoître, K., Mac-Thiong, J.-M., Ménard, A.-L., Petit, Y., Garo, A., & Arnoux, P.-J. (2017). Substantial vertebral body osteophytes protect against severe vertebral fractures in compression. PLOS One, 12(10), e0186779 (15 pages). Disponible
Wallin, T. J., Pikul, J. H., Bodkhe, S., Peele, B. N., Mac Murray, B. C., Therriault, D., McEnerney, B. W., Dillon, R. P., Giannelis, E. P., & Shepherd, R. F. (2017). Click chemistry stereolithography for soft robots that self-heal. Journal of Materials Chemistry B, 5(31), 6249-6255. Lien externe
Wang, X., Aubin, C.-É., & Rawlinson, J. (2017). 3-D Correction of Adolescent Idiopathic Scoliosis: A Biomechanical Simulation of Spinal Instrumentation Using APEX and Standard Spinal Rods. (Rapport technique). Non disponible
Wang, X., Aubin, C.-É., & Rawlinson, J. (2017). APEX Rod Correction Project –Phase 1. (Rapport technique). Non disponible
Wang, X., Aubin, C.-É., Coleman, J., & Rawlinson, J. (2017). Correction capability in the 3 anatomic planes of different pedicle screw designs in scoliosis instrumentation. Clinical Spine Surgery, 30(4), E323-E330. Lien externe
Wang, X., Crandall, D. G., Parent, S., Larson, N., Labelle, H., & Aubin, C.-É. (mai 2016). Biomechanical effect of pedicle screw distribution in AIS instrumentation using segmental translation technique: Preliminary results [Communication écrite]. 13th International Conference on Conservative Management of Spinal Deformities and First Joint Meeting of the International Research Society on Spinal Deformities and the Society on Scoliosis Orthopaedic and Rehabilitation Treatment (SOSORT-IRSSD 2016), Banff, Alberta (43 pages). Publié dans Scoliosis and Spinal Disorders, 12(S1). Disponible
Wang, X., Larson, A. N., Crandall, D. G., Parent, S., Labelle, H., Ledonio, C. G. T., & Aubin, C.-É. (2017). Biomechanical effect of pedicle screw distribution in AIS instrumentation using a segmental translation technique: computer modeling and simulation. Scoliosis and Spinal Disorders, 12(1). Disponible
Wang, X., Larson, A. N., Labelle, H., Parent, S., Ledonio, C. G. T., Polly, D. W., & Aubin, C.-É. (octobre 2017). Biomechanical comparison of different pedicle screw patterns in adolescent idiopathic scoliosis instrumentation [Communication écrite]. 47e Réunion annuelle de la Société de scoliose du Québec, Baie St-Paul, QC. Non disponible
Wang, X., Larson, A. N., Labelle, H., Parent, S., Ledonio, C. G. T., Polly, D. W., & Aubin, C.-É. (septembre 2017). Optimization of implant density in AIS instrumentation using a computerized spine simulator [Communication écrite]. 52nd Annual Meeting & Course - Scoliosis Research Society, Philadelphia, PA. Non disponible
Wei, H., Cauchy, X., Abderrafai, Y., Leng, J., & Therriault, D. (juillet 2017). Solvent-cast 3D printing of superior conductive hybrid particles based nanocomposites [Communication écrite]. 54th Annual Technical Meeting of the Society of Engineering Science (SES 2017), Boston, United States. Non disponible
Wen, J. (2017). Identification d'une fonction coût réaliste de la distribution des forces musculaires en cours de mouvement [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Wozniak, A., & Mayer, J. R. R. (mars 2017). Corrected measured point determination in coordinate measurement [Communication écrite]. Spring Topical Meeting on Manufacture and Metrology of Structured and Freeform Surfaces for Functional Applications (ASPEN/ASPE 2017), Hong Kong, Hong kong. Lien externe
Wu, Q., Heuzey, M.-C., & Therriault, D. (juillet 2017). 3D printing of chitosan-based nanocomposites for electronic applications [Communication écrite]. 54th Annual Technical Meeting of the Society of Engineering Science (SES 2017), Boston, United States. Non disponible
Wu, Q., Maire, M., Lerouge, S., Therriault, D., & Heuzey, M.-C. (2017). 3D Printing of Microstructured and Stretchable Chitosan Hydrogel for Guided Cell Growth. Advanced Biosystems, 1(6), 1700058 (6 pages). Lien externe
Xing, K., Achiche, S., & Mayer, J. R. R. (mai 2017). Volumetric error modelling for machine tool condition monitoring using data methods [Communication écrite]. International Conference on Virtual Machining and Process Technology, Montréal, Québec. Non disponible
Xu, C., Bouchemit, A., L'Espérance, G., Laberge Lebel, L., & Therriault, D. (juillet 2017). Dense metallic structure fabrication through 3D printing of metallic inks and subsequent metal sintering [Communication écrite]. 54th Annual Technical Meeting of the Society of Engineering Science (SES 2017), Boston, United States. Non disponible
Xu, C., Bouchemit, A., L'Espérance, G., Laberge Lebel, L., & Therriault, D. (2017). Solvent-cast based metal 3D printing and secondary metallic infiltration. Journal of Materials Chemistry C, 5(40), 10448-10455. Lien externe
Xu, C., Therriault, D., Laberge Lebel, L., L'Espérance, G., & Bouchemit, A. (2017). Metal 3D printing method and metallic 3D printing materials. (Demande de brevet no CA2976782). Lien externe
Younsi, R., & Detuncq, B. (juillet 2017). Using experimental investigation for educational purposes: Characterization of a heat exchanger [Communication écrite]. 9th International Conference on Education and New Learning Technologies, Barcelona, Spain. Lien externe
Zhang, K. (2017). Impact of Maestro thermostats on heating energy use. (Rapport d'étude - Cycles supérieurs). Disponible
Zhang, K., McDowell, T. P., & Kummert, M. (août 2017). Sky Temperature Estimation and Measurement for Longwave Radiation Calculation [Communication écrite]. 15th IBPSA Conference (Building Simulation 2017), San Francisco, CA. Lien externe
Zimmermann, E. A., Bouguerra, S., Londoño, I., Moldovan, F., Aubin, C.-É., & Villemure, I. (2017). In situ deformation of growth plate chondrocytes in stress-controlled static VS dynamic compression. Journal of Biomechanics, 56, 76-82. Lien externe
Zizoua, C., Achiche, S., Boukhenous, S., Attari, M., & Raison, M. (avril 2017). Wearable bio-instrument for detecting body movement based on strain gauges [Communication écrite]. 30th IEEE Canadian Conference on Electrical and Computer Engineering (CCECE 2017), Windsor, ON, Canada (4 pages). Lien externe
Zizoua, C., Raison, M., Boukhenous, S., Attari, M., & Achiche, S. (2017). Development of a Bracelet with Strain-Gauge Matrix for Movement Intention Identification in Traumatic Amputees. IEEE Sensors Journal, 17(8), 2464-2471. Lien externe
Zou, D., Therriault, D., & Gosselin, F. (septembre 2017). Finite element simulation of microstructured fibers with sacrificial bonds [Communication écrite]. International conference in aerospace for young scientists (ICAYS 2017), Beijing, China. Non disponible
Zou, S., Zulkifli, H. Z., Therriault, D., & Gosselin, F. (juillet 2017). Failure mechanisms of poly(lactic acid) fibers featuring microstructured sacrificial bonds [Communication écrite]. 54th Annual Technical Meeting of the Society of Engineering Science (SES 2017), Boston, United States. Non disponible
Zullo, A., Mancini, F. P., Schleip, R., Wearing, S., Yahia, L., & Klinger, W. (2017). The interplay between fascia, skeletal muscle, nerves, adipose tissue, inflammation and mechanical stress in musculo-fascial regeneration. Journal of gerontology and geriatrics, 65(4), 271-283. Lien externe
