Documents dont le département est "Département de génie chimique"

A

Addi, C., Murschel, F., Liberelle, B., Riahi, N., Feraud, O., & De Crescenzo, G. (mai 2016). The addition of the collagen binding domain of fibronectin potentiates the biochemical availability of basic fibroblast growth factor for the culture of induced pluripotent stem cells [Affiche]. 10th World Biomaterials Congress, Montréal, Québec. Publié dans Frontiers in Bioengineering and Biotechnology, 4. Disponible

Albano, L. G. S., Di Mauro, E., Kumar, P., Cicoira, F., Graeff, C. F. O., & Santato, C. (2016). Novel insights on the physicochemical properties of eumelanins and their DMSO derivatives. Polymer International, 65(11), 1315-1322. Lien externe

Ameli, A., Nofar, M., Saniei, M., Wang, S., & Park, C. B. (juin 2015). Foam injection molding of polypropylene/stainless steel fiber composites for efficient EMI shielding [Communication écrite]. 31st International Conference of the Polymer Processing Society (PPS-31), Jeju Island, Korea (5 pages). Lien externe

Ammara, R., Fradette, L., & Paris, J. (2016). Equipment performance analysis of a Canadian Kraft mill. Part I: Development of new key performance indicators (KPI). Chemical Engineering Research and Design, 115, 160-172. Lien externe

Ammara, R., Fradette, L., & Paris, J. (2016). Equipment performance analysis of a Canadian Kraft mill. Part II: Diagnostics and identification of improvement projects. Chemical Engineering Research and Design, 115, 107-115. Lien externe

Angel, C.-G., Desgagné, M., D'Elia, N., Charles-Hubert, L.-F., Juan Carlos, R., Georges-Etienne, R., Wertheimer, M. R., Paula, M., & Caroline, H. (mai 2016). Anionic surfaces with minimal charge density can restore burst coagulation of microparticle/exosome-depleted blood plasma [Affiche]. 10th World Biomaterials Congress, Montréal, Québec (2 pages). Publié dans Frontiers in Bioengineering and Biotechnology, 4. Disponible

Ardila, N., Medina, N., Arkoun, M., Heuzey, M.-C., Ajji, A., & Panchal, C. J. (2016). Chitosan-bacterial nanocellulose nanofibrous structures for potential wound dressing applications. Cellulose, 23(5), 3089-3104. Lien externe

Arnold, E., Hammami, I., Chen, J., Gupte, S., Durocher, Y., & Jolicoeur, M. (2016). Overexpression of G6PDH does not affect the behavior of HEK-293 clones stably expressing interferon-α2b. AIMS Bioengineering, 3(3), 319-336. Disponible

Asiedu-Boateng, P., Legros, R., & Patience, G. S. (2016). Attrition resistance of calcium oxide-copper oxide-cement sorbents for post-combustion carbon dioxide capture. Advanced Powder Technology, 27(2), 786-795. Lien externe

Attia, M., Farag, S., Habibzadeh, S., Hamzehlouia, S., & Chaouki, J. (2016). Fast Pyrolysis of Lignocellulosic Biomass for the Production of Energy and Chemicals: A Critical Review. Current Organic Chemistry, 20(23), 2458-2479. Lien externe

Azizi, D., Larachi, F., & Latifi, M. (2016). Ionic-liquid collectors for rare-earth minerals flotation: Case of tetrabutylammonium bis(2-ethylhexyl)-phosphate for monazite and bastnäsite recovery. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 506, 74-86. Lien externe

B

Bagheriasl, D. (2016). Development of Polymer Nanocomposites from Renewable Cellulose Nanocrystals [Thèse de doctorat, École Polytechnique de Montréal]. Disponible

Bagheriasl, D., Carreau, P. J., Riedl, B., Dubois, C., & Hamad, W. Y. (2016). Shear rheology of polylactide (PLA)–cellulose nanocrystal (CNC) nanocomposites. Cellulose, 23(3), 1885-1897. Lien externe

Bale, C. W., Bélisle, E., Chartrand, P., Decterov, S., Eriksson, G., Gheribi, A. E., Hack, K., Jung, I. H., Kang, Y. B., Melançon, J., Pelton, A., Petersen, S., Robelin, C., Sangster, J., Spencer, P., & Van Ende, M. A. (2016). FactSage thermochemical software and databases, 2010–2016. Calphad, 54, 35-53. Disponible

Bale, C. W., Bélisle, E., Chartrand, P., Decterov, S., Eriksson, G., Gheribi, A. E., Hack, K., Jung, I. H., Kang, Y. B., Melançon, J., Pelton, A., Petersen, S., Robelin, C., Sangster, J., Spencer, P., & Van Ende, M. A. (2016). Reprint of: FactSage thermochemical software and databases, 2010-2016 (vol 54, pg 35, 2016). CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry, 55(1), 1-19. Lien externe

Bashiri, H., Alizadeh, E., Bertrand, F., & Chaouki, J. (2016). Investigation of turbulent fluid flows in stirred tanks using a non-intrusive particle tracking technique. Chemical Engineering Science, 140, 233-251. Lien externe

Bashiri, H., Bertrand, F., & Chaouki, J. (2016). Development of a Multiscale Model for the Design and Scale-up of Gas/Liquid Stirred Tank Reactors. Chemical Engineering Journal, 297, 277-294. Lien externe

Beaulieu, C., Bertrand, F., & Chaouki, J. (juin 2016). How does granular segregation influence heat transfer in a rotary kiln? [Communication écrite]. Mixing XXV, Québec, Québec. Non disponible

Beaulieu, C., Chaouki, J., & Bertrand, F. (juin 2016). Influence of Granular Segregation on Heat Transfer in a Rotary Kiln [Communication écrite]. Mixing XXV, Québec, Québec. Non disponible

Beauvais, S., Drevelle, O., Lauzon, M. A., Daviau, A., & Faucheux, N. (2016). Modulation of MAPK signalling by immobilized adhesive peptides: Effect on stem cell response to BMP-9-derived peptides. Acta Biomaterialia, 31, 241-251. Lien externe

Ben Salem, A. (2016). Corrélation entre les propriétés physico-chimiques et électro-catalytiques de la réaction de réduction de l'oxygène sur des catalyseurs à base d'oxy-nitrure de titane pour la pile à combustible PEMFC [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible

Bérard, A. (2016). Modification de la surface des filets d'exclusion utilisés dans la production biologique de pommes dans l'est du Canada [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible

Bérard, A., Patience, G. S., Chouinard, G., & Tavares, J. R. (2016). Photo initiated chemical vapour deposition to increase polymer hydrophobicity. Scientific Reports, 6(1). Disponible

Bertrand, F., & Blais, B. (octobre 2016). Development of a Novel CFD-DEM Model for Understanding Solid-Liquid Mixing [Communication écrite]. Mathias 2016, Paris, France. Non disponible

Bertrand, F., & Blais, B. (août 2016). Development of a Novel CFD-DEM Model for Understanding Solid-Liquid Mixing [Communication écrite]. Enabling Process Innovation by Computation Workshop (EPIC 2016), Banff, Alberta. Lien externe

Bertrand, O., Blais, B., Bertrand, F., & Fradette, L. (octobre 2016). Development of Pressure Based Methods for the Determination of the Just-Suspended Speed and Suspension State in Viscous Solid-Liquid Mixing [Communication écrite]. Canadian Society for Chemical Engineering (CSChE) Annual Meeting, Québec, Québec. Non disponible

Bertrand, O., Blais, B., Fradette, L., & Bertrand, F. (juin 2016). Development of Pressure Based Methods for the Determination of the Just-Suspended Speed and Suspension State in Viscous Solid-Liquid Mixing [Communication écrite]. Mixing XXV, Québec, Québec. Non disponible

Binette, J. C., Srinivasan, B., & Bonvin, D. (2016). On the various local solutions to a two-input dynamic optimization problem. Computers & Chemical Engineering, 95, 71-74. Lien externe

Binette, J.-C. (2016). Robustesse de la commande prédictive non-linéaire par rapport aux erreurs paramétriques [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible

Binette, J.-C., & Srinivasan, B. (2016). On the use of nonlinear model predictive control without parameter adaptation for batch processes. Processes, 4(3). Disponible

Blais, B. (2016). Développement d'un modèle Euler-Lagrange robuste pour la simulation des écoulements solide-liquide dans les opérations de mélange [Thèse de doctorat, École Polytechnique de Montréal]. Disponible

Blais, B., & Bertrand, F. (novembre 2016). Viscous Solid-Liquid Mixing in Agitated Vessels via CFD-DEM Simulation: Suspension Dynamics and Influence of the Geometry [Communication écrite]. AIChE Annual Meeting, San Francisco, Calif.. Lien externe

Blais, B., Bertrand, O., Lassaigne, M., Fradette, L., & Bertrand, F. (juin 2016). Understanding Solid-Liquid Mixing Through the Development of a Novel CFD-DEM Model [Communication écrite]. North American Mixing Forum (Mixing XXV), Québec, Québec. Lien externe

Blais, B., Lassaigne, M., Goniva, C., Fradette, L., & Bertrand, F. (2016). Development of an unresolved CFD–DEM model for the flow of viscous suspensions and its application to solid–liquid mixing. Journal of Computational Physics, 318, 201-221. Disponible

Blais, B., Lassaigne, M., Goniva, C., Fradette, L., & Bertrand, F. (2016). A semi-implicit immersed boundary method and its application to viscous mixing. Computer & Chemical Engineering, 85, 136-146. Disponible

Boespflug, G., Maire, M., De La Torre Torres, J., De Crescenzo, G., Lerouge, S., & Wertheimer, M. R. (mai 2016). Chemical aspects of cell adhesion and -growth for vascular grafts [Affiche]. 10th World Biomaterials Congress, Montréal, Québec. Publié dans Frontiers in Bioengineering and Biotechnology, 4. Disponible

Boespflug, G., Maire, M., Liberelle, B., De Crescenzo, G., Lerouge, S., & Wertheimer, M. R. (septembre 2016). Chemical Aspects of Endothelial Cell Adhesion and -Growth for Vascular Grafts [Communication écrite]. 6th international conference on plasma medicine, Bratislava, Slovakia. Non disponible

Boffito, D. C., Patience, C. A., Patience, P. A., Bertrand, F., & Patience, G. S. (2016). How do you write and present research well? 8 - Assign authorship according to intellectual involvement. Canadian Journal of Chemical Engineering, 94(6), 1127-1134. Lien externe

Boffito, D. C., Patience, P. A., & Patience, G. S. (2016). How do you write and present research well? 13-Set axis titles to within 1 pt of article text. Canadian Journal of Chemical Engineering, 94(9), 1633-1635. Lien externe

Boffito, D. C., Patience, P. A., Srinivasan, B., Perrier, M., & Patience, G. S. (2016). How do you write and present research well? 10 - State the uncertainty, but not too precisely. Canadian Journal of Chemical Engineering, 94(8), 1425-1430. Lien externe

Bonhivers, J.-C., Moussavi, A., Alva-Argaez, A., & Stuart, P. R. (2016). Linking pinch analysis and bridge analysis to save energy by heat-exchanger network retrofit. Applied Thermal Engineering, 106, 443-472. Lien externe

Bruel, C. (2016). Thermodynamique et stabilité des films de platine pour l'hydrogénation de CO2 dans un réacteur à oxyde solide [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible

Bruel, C., Chiron, F.-X., Tavares, J. R., & Patience, G. S. (2016). An exponential expression for gas heat capacity, enthalpy, and entropy. Experimental Thermal and Fluid Science, 78, 249-253. Lien externe

Buschmann, M. D., Lavertu, M., & Veilleux, D. (2016). Freeze-dried polyelectrolyte complexes that maintain size and biological activity. (Demande de brevet no US20160130606). Lien externe

C

Cao, X. V. A. (2016). Développements méthodologiques pour l'utilisation des terres en évaluation des impacts du cycle de vie : application aux polymères agro-sourcés [Thèse de doctorat, École Polytechnique de Montréal]. Disponible

Carlos, F.-S. J., Savadogo, O., Oishi, K., Reyes-Cruz, V. E., & Veloz-Rodriguez, M. A. (2016). Electrodeposition of iron from kaolin clay and the effect of mass transport. Journal of New Materials for Electrochemical Systems, 19(2), 103-107. Lien externe

Chambost, V., & Stuart, P. R. (février 2016). The Business Side of Engineering [Communication écrite]. 101st PaperWeek- BioFor Conference, Montréal, Qc, Canada. Lien externe

Chaouki, J., Latifi, M., Sauriol, P., & Sarbarze, S. A. (mai 2016). Gas-phase carbon coating of LiFePO₄ for rechargeable batteries [Communication écrite]. Fluidization XV, Montebello, Canada. Lien externe

Chaouki, J., Sarbarze, S. A., & Latifi, M. (mai 2016). Fluidization of cohesive nanoparticles with a new pulsation technique [Communication écrite]. Fluidization XV, Montebello, Québec, Canada. Lien externe

Cherubini, F., Fuglestvedt, J., Gasser, T., Reisinger, A., Cavalett, O., Huijbregts, M. A. J., Johansson, D. J. A., Jørgensen, S. V., Raugei, M., Schivley, G., Strømman, A. H., Tanaka, K., & Levasseur, A. (2016). Bridging the gap between impact assessment methods and climate science. Environmental Science & Policy, 64, 129-140. Lien externe

Chimeni, D. Y., Toupe, J. L., Dubois, C., & Rodrigue, D. (2016). Effect of hemp surface modification on the morphological and tensile properties of linear medium density polyethylene (LMDPE) composites. Composite Interfaces, 23(5), 405-421. Lien externe

Chimeni, D. Y., Toupe, J. L., Dubois, C., & Rodrigue, D. (2016). Effect of surface modification on the interface quality between hemp and linear medium-density polyethylene. Journal of Applied Polymer Science, 133(32), 9 pages. Lien externe

Chioua, M., Srinivasan, B., Guay, M., & Perrier, M. (juin 2016). Model adequacy for a precise optimization using extremum seeking control [Communication écrite]. European Control Conference (ECC 2016), Aalborg, Denmark. Lien externe

Chioua, M., Srinivasan, B., Guay, M., & Perrier, M. (juin 2016). Performance Improvement of Extremum Seeking Control using Recursive Least Square Estimation with Forgetting Factor [Communication écrite]. 11th IFAC Symposium on Dynamics and Control of Process Systems, including Biosystems (IFAC DYCOPS-CAB 2016), Trondheim, Norway. Publié dans IFAC-PapersOnLine, 49(7). Lien externe

Ciroth, A., Muller, S., Weidema, B., & Lesage, P. (2016). Empirically based uncertainty factors for the pedigree matrix in ecoinvent. International Journal of Life Cycle Assessment, 21(9), 1338-1348. Lien externe

Clerc, F., Chambost, V., & Stuart, P. R. (février 2016). Technology Due Diligence for the Forest Biorefinery [Communication écrite]. 101st PaperWeek- BioFor Conference, Montréal, Qc, Canada. Non disponible

D

D'Elia, N. L., Mathieu, C., Hoemann, C. D., Gravina, A. N., Sartuqui, J., & Messina, P. V. (2016). Study of rMSC viability, morphology and adhesion on different bone mimetic surfaces. Bone, 89, 68-68. Lien externe

Dagenais, M., Deschênes, J., McDonald, M., Baptiste, P., Mascle, C., Legros, R., Spreutels, L., Marinova, M., Perrier, M., & Frayret, J.-M. (2016). Les stratégies de circularité des ressources. Dans Sauvé, S., Normandin, D., & McDonald, M. (édit.), L'économie circulaire : une transition incontournable (p. 37-63). Lien externe

Dalil, M., Carnevali, D., Edake, M., Auroux, A., Dubois, J.-L., & Patience, G. S. (2016). Gas phase dehydration of glycerol to acrolein: Coke on WO3/TiO2 reduces by-products. Journal of Molecular Catalysis A: Chemical, 421, 146-155. Lien externe

Dalil, M., Edake, M., Sudeau, C., Dubois, J.-L., & Patience, G. S. (2016). Coke promoters improve acrolein selectivity in the gas-phase dehydration of glycerol to acrolein. Applied Catalysis A: General, 522, 80-89. Lien externe

Dandres, T., Farrahi Moghaddam, R., Nguyen, K., Lemieux, Y., Cheriet, M., & Samson, R. (octobre 2015). Applications and challenges of life cycle assessment in the context of a green sustainable telco cloud [Communication écrite]. EAI International Conference on Smart Sustainable City Technologies (S2CT 2015), part of SmartCity360, Toronto, Ontario. Lien externe

Dandres, T., Samson, R., Moghaddam, R. F., Nguyen, K. K., Cheriet, M., & Lemieux, Y. (octobre 2016). The green sustainable telco cloud: Minimizing greenhouse gas emissions of server load migrations between distributed data centres [Communication écrite]. 12th International Conference on Network and Service Management (CNSM 2016), Montréal, Québec. Lien externe

Darabi Mahboub, M. J., Lotfi, S., Dubois, J. L., & Patience, G. S. (2016). Gas phase oxidation of 2-methyl-1,3-propanediol to methacrylic acid over heteropolyacid catalysts. Catalysis Science & Technology, 6(17), 6525-6535. Lien externe

Darabi Mahboub, M. J., Rostamizadeh, M., Dubois, J.-, & Patience, G. S. (2016). Partial oxidation of 2-methyl-1,3-propanediol to methacrylic acid: experimental and neural network modeling. RSC Advances, 6(115), 114123-114134. Lien externe

Depres-tremblay, G., Chevrier, A., Snow, M., Hurtig, M. B., Rodeo, S., & Buschmann, M. D. (2016). Rotator cuff repair: a review of surgical techniques, animal models, and new technologies under development. Journal of Shoulder and Elbow Surgery, 25(12), 2078-2085. Lien externe

Di Mauro, E., Carpentier, O., Yañez Sanchez, S. I., Ignoumba-Ignoumba, N., Lalancette-Jean, M., Zhang, S., Lefebvre, J., Graeff, C. F. O., Cicoira, F., & Santato, C. (2016). Resistive switching controlled by the hydration level in thin films of the biopigment eumelanin. Journal of Materials Chemistry C, 4(40), 9544-9553. Lien externe

Diffo Téguia, C., Chambost, V., Sanaei, S., D'Amours, S., & Stuart, P. R. (2016). Strategic Transformation of the Forest Industry Value Chain. Dans D'Amours, S., Ouhimmou, M., Audy, J.-F., & Feng, Y. (édit.), Forest Value Chain Optimization and Sustainability . Lien externe

Diffo, C., Chambost, V., & Stuart, P. R. (mai 2016). Strategic Evaluation of the Lignin Biorefinery [Communication écrite]. 12th International Conference on Renewable Resources and Biorefineries (RRB-12), Ghent, Belgium. Non disponible

Dorion-Thibaudeau, J. (2016). Études des interactions entre les immunoglobulines G et leurs récepteurs Fc gamma afin d'évaluer le patron de glycosylation des anticorps [Thèse de doctorat, École Polytechnique de Montréal]. Disponible

Dorion-Thibaudeau, J., St-Laurent, G., Raymond, C., De Crescenzo, G., & Durocher, Y. (2016). Biotinylation of the Fc gamma receptor ectodomains by mammalian cell co-transfection: application to the development of a surface plasmon resonance-based assay. Journal of Molecular Recognition, 29(2), 60-69. Lien externe

Doucet, J., & Chaouki, J. (juin 2016). Improving resource efficiency to address climate change by observing nature [Communication écrite]. 5th International Congress on Green Process Engineering (GPE 2016), Fairmont Tremblant Hotel, Mont Tremblant, Quebec, Canada (2 pages). Lien externe

Doucet, J., & Chaouki, J. (2016). Method of distributing small scale pyrolysis for production of renewable fuels from waste. [Procédé de distribution de pyrolyse à petite échelle pour la production de combustibles renouvelables à partir de déchets]. (Demande de brevet no US20160200982). Lien externe

Doucet, J., Chaouki, J., & Sobhy, A. (2016). Catalyst for distributed batch microwave pyrolysis, system and process thereof. [Catalyseur de pyrolyse par micro-ondes par lots distribués, système et procédé de pyrolyse correspondants]. (Brevet no US9487708). Lien externe

Douïeb, S. (2016). Étude de l'influence de l'écoulement sur la cristallisation en solution : applications aux hydrates de dioxyde de carbone et à une substance pharmaceutique [Thèse de doctorat, École Polytechnique de Montréal]. Disponible

Drevelle, O., Faucheux, N., Sarazin, P., & Virgilio, N. (octobre 2016). Alginate scaffolds for 3D cell culture systems [Affiche]. 66th Canadian Chemical Engineering Conference, Québec, QC. Non disponible

Drevelle, O., Sarazin, P., Virgilio, N., & Faucheux, N. (mai 2016). Development of bone substitute : poly(epsilon-caprolactone) scaffold functionalized by adhesive peptides in combination with soluble BMP-9 [Affiche]. 10th World Biomaterials Congress, Montréal, Québec. Lien externe

Drevelle, O., Sarazin, P., Virgilio, N., & Faucheux, N. (octobre 2016). Development of bone substitute: Poly(epsilon-caprolactone) scaffold functionalized by adhesive peptides in combination with soluble BMP-9 [Présentation]. Dans 66th Canadian Chemical Engineering Conference, Québec, Québec. Non disponible

Dubois, J.-L., & Patience, G. S. (2016). Continuous catalyst regeneration in a fluidized bed reactor. (Brevet no US9427718). Lien externe

E

El Bachawati, M., Manneh, R., Belarbi, R., Dandres, T., Nassab, C., & El Zakhem, H. (2016). Cradle-to-gate Life Cycle Assessment of traditional gravel ballasted, white reflective, and vegetative roofs: A Lebanese case study. Journal of Cleaner Production, 137, 833-842. Lien externe

Ellingsen, L. A.-W., Hung, C. R., Majeau-Bettez, G., Singh, B., Chen, Z., Whittingham, M. S., & Strømman, A. H. (2016). Nanotechnology for environmentally sustainable electromobility. Nature Nanotechnology, 11(12), 1039-1051. Disponible

Esmaeili, A., Farag, S., Guy, C., & Chaouki, J. (2016). Effect of elevated pressure on the hydrodynamic aspects of a pilot-scale bubble column reactor operating with non-Newtonian liquids. Chemical Engineering Journal, 288, 377-389. Lien externe

Esmaeili, A., Guy, C., & Chaouki, J. (2016). Local hydrodynamic parameters of bubble column reactors operating with non-Newtonian liquids: Experiments and models development. AICHE Journal, 62(4), 1382-1396. Lien externe

F

Farag, S., & Chaouki, J. (octobre 2016). On-site thermochemical conversion of lignin: technical and economic aspects [Communication écrite]. Biomass North AGM and Forum Research Symposium, North Bay, Ont.. Non disponible

Farag, S., Mudraboyina, B. P., Jessop, P. G., & Chaouki, J. (2016). Impact of the heating mechanism on the yield and composition of bio-oil from pyrolysis of kraft lignin. Biomass and Bioenergy, 95, 344-353. Lien externe

Farahany, S., Dahle, A. K., Ourdjini, A., & Hekmat-Ardakan, A. (2016). Flake-fibrous transition of silicon in near-eutectic Al-11.7Si-1.8Cu-0.8Zn-0.6Fe-0.3Mg alloy treated with combined effect of bismuth and strontium. Journal of Alloys and Compounds, 656, 944-956. Lien externe

Farhanian, D., Tavares, J. R., & De Crescenzo, G. (mars 2016). Preparation and characterization of thin polymer-like coatings on silicon via photo-initiated chemical vapor deposition (PICVD) [Communication écrite]. McGill-Polytechnique Chemical Engineering Research Day, Montréal, Québec. Lien externe

Fernandes de Sousa, S., Bastin, G., Jolicoeur, M., & Vande Wouwer, A. (2016). Dynamic metabolic flux analysis using a convex analysis approach: Application to hybridoma cell cultures in perfusion. Biotechnology and Bioengineering, 113(5), 1102-1112. Lien externe

Fernandes, S., Robitaille, J., Bastin, G., Jolicoeur, M., & Vande Wouwer, A. (juin 2016). Application of Dynamic Metabolic Flux Convex Analysis to CHO-DXB11 Cell Fed-batch Cultures [Communication écrite]. 11th IFAC Symposium on Dynamics and Control of Process System, including Biosystems (IFAC DYCOPS-CAB 2016), Trondheim, Norway. Publié dans IFAC-PapersOnLine, 49(7). Lien externe

Fernandes, S., Robitaille, J., Bastin, G., Jolicoeur, M., & Wouwer, A. V. (octobre 2016). Dynamic metabolic flux analysis of underdetermined and overdetermined metabolic networks [Communication écrite]. Foundations of Systems Biology in Engineering (FOSBE 2016), Magdeburg, Germany. Publié dans IFAC-PapersOnLine, 49(26). Lien externe

Fernández-Ponce, T., Parjikolaei, B. R., Nasri Lari, H., Casas, L., Mantell, C., & Martínez de la Ossa, E. J. (2016). Pilot-plant scale extraction of phenolic compounds from mango leaves using different green techniques: Kinetic and scale up study. Chemical Engineering Journal, 299, 420-430. Lien externe

Fong, D., Gregoire-Gelinas, P., Lavertu, M., Sato, S., & Hoemann, C. D. (mai 2016). Human macrophages release higher IL-1ra over IL-1beta when stimulated by block acetylated chitosan microparticles and not by random acetylated chitosans or water-soluble oligomers [Affiche]. 10th World Biomaterials Congress, Montréal, Québec. Publié dans Frontiers in Bioengineering and Biotechnology, 4. Disponible

Frischknecht, R., Benetto, E., Dandres, T., Heijungs, R., Roux, C., Schrijvers, D., Wernet, G., Yang, Y., Messmer, A., & Tschümperlin, L. (2016). LCA and decision making: when and how to use consequential LCA; 62nd LCA forum, Swiss Federal Institute of Technology, Zürich, 9 September 2016. International Journal of Life Cycle Assessment, 22(2), 296-301. Lien externe

Frischknecht, R., Fantke, P., Tschümperlin, L., Niero, M., Anton, A., Bare, J., Boulay, A.-M., Cherubini, F., Hauschild, M. Z., Henderson, A., Levasseur, A., McKone, T. E., Michelsen, O., Canals, L. M. , Pfister, S., Ridoutt, B., Rosenbaum, R. K., Verones, F., Vigon, B., & Jolliet, O. (2016). Global guidance on environmental life cycle impact assessment indicators: progress and case study. International Journal of Life Cycle Assessment, 21(3), 429-442. Lien externe

G

Gancheva, T., & Virgilio, N. (2016). Enhancing and tuning the response of environmentally sensitive hydrogels with embedded and interconnected pore networks. Macromolecules, 49(16), 5866-5876. Lien externe

Gancheva, T., & Virgilio, N. (décembre 2016). Highly porous stimuli-sensitive hydrogels embedded with metal nanoparticles : towards micro-reactors with enhanced catalytic properties [Affiche]. CREPEC Annual Colloquium, Montréal, Québec. Non disponible

Gancheva, T., & Virgilio, N. (octobre 2016). Porous environmentally sensitive hydrogels with tunable and enhanced response properties [Présentation]. Dans 66th Canadian Chemical Engineering Conference, Québec, Québec. Non disponible

Gazil, O., Gancheva, T., & Virgilio, N. (octobre 2016). Towards gold nanoparticles film growth on microstructured porous hydrogel surfaces [Présentation]. Dans 66th Canadian Chemical Engineering Conference, Québec, Québec. Non disponible

Ghanbari, A., Heuzey, M.-C., Carreau, P., & Ton-That, M.-T. (2016). Morphology and gas barrier properties of polymer nanocomposites. Dans Polymer Morphology : Principles, Characterization, and Processing (p. 397-417). Lien externe

Ghavidel, N., Clerc, F., Chambost, V., & Stuart, P. R. (février 2016). De-Risking the Forest Biorefinery [Communication écrite]. 101st PaperWeek- BioFor Conference, Montréal, Qc, Canada. Non disponible

Gheribi, A. E., & Chartrand, P. (février 2016). Prediction of the thermal conductivity of oxide microstructures by a new self consistent thermodynamics method supported by first principle calculations [Présentation]. Dans 145th TMS Annual Meeting & Exhibition (TMS 2016), Nashville, TN, USA. Non disponible

Gheribi, A. E., & Chartrand, P. (2016). Thermal conductivity of molten salt mixtures: theoretical model supported by equilibrium molecular dynamics simulations. Journal of Chemical Physics, 144(8), 12 pages. Lien externe

Gheribi, A. E., Autissier, E., Gardarein, J. L., & Richou, M. (2016). Thermal transport properties of multiphase sintered metals microstructures. The copper-tungsten system: Experiments and modeling. Journal of Applied Physics, 119(14), 8 pages. Lien externe

Gheribi, A. E., Harvey, J.-P., Belisle, E., Robelin, C., Chartrand, P., Pelton, A., Bale, C. W., & Le Digabel, S. (2016). Use of a biobjective direct search algorithm in the process design of material science applications. Optimization and Engineering, 17(1), 27-45. Lien externe

Gheribi, A. E., Harvey, J.-P., Chartrand, P., Bélisle, E., Bale, C. W., & Pelton, A. (février 2016). Identifying optimal conditions for alloys and process design using the Mesh Adaptive Direct Search algorithm [Présentation]. Dans 145th TMS Annual Meeting & Exhibition (TMS 2016), Nashville, TN, USA. Non disponible

Gheribi, A. E., Salanne, M., & Chartrand, P. (2016). Formulation of Temperature-Dependent Thermal Conductivity of NaF, -Na3AlF6, Na5Al3F14, and Molten Na3AlF6Supported by Equilibrium Molecular Dynamics and Density Functional Theory. Journal of Physical Chemistry C, 120(40), 22873-22886. Lien externe

Grmela, M. (2016). Externally driven macroscopic systems: Dynamics versus thermodynamics. Journal of Statistical Physics, 166(2), 282-316. Lien externe

Grmela, M. (2016). Role of thermodynamics in extensions of mesoscopic dynamical theories. Communications in Applied and Industrial Mathematics, 7(2), 56-80. Disponible

Grmela, M., & Laidlaw, W. G. (2016). Mesoscopic kinetic theory. The Journal of Chemical Physics, 94(5-1), 052150-052150. Lien externe

Guo, R., Zhang, S., Yue, S., Yan, P., Wu, Y., Qu, D., & Zhao, Y. (2016). High efficiency and simplified white organic light-emitting diode based on a single-host emission layer. Synthetic Metals, 220, 329-333. Lien externe

H

Habibzadeh, S., Zabeida, O., Sapieha, J.-E., Martinu, L., Chaouki, J., Sargent, R., & Argoitia, A. (mai 2016). Conformal multilayer coatings on fine silica microspheres by atmospheric pressure fluidized bed chemical vapor deposition [Communication écrite]. Fluidization XV, Montebello, Québec. Lien externe

Haddad, M. (2016). Towards Sustainable Electrochemical Acidification of Kraft Black Liquor for Lignin Extraction: Proof of Concept, Control of Membrane Fouling and Yield Enhancement [Thèse de doctorat, École Polytechnique de Montréal]. Disponible

Haddad, M., Labrecque, R., Bazinet, L., Savadogo, O., & Paris, J. (2016). Effect of process variables on the performance of electrochemical acidification of Kraft black liquor by electrodialysis with bipolar membrane. Chemical Engineering Journal, 304, 977-985. Lien externe

Haddad, T., Noël, S., Liberelle, B., El Ayoubi, R., Ajji, A., & De Crescenzo, G. (2016). Fabrication and surface modification of poly lactic acid (PLA) scaffolds with epidermal growth factor for neural tissue engineering. Biomatter, 6(1). Disponible

Hadjizadeh, A., & Savoji, H. (mai 2016). Growth factor releasing micro strands promoted in vitro angiogenesis [Communication écrite]. 10th World Biomaterials Congress, Montréal, Québec. Non disponible

Hadjizadeh, A., Savoji, H., & Ajji, A. (2016). A Facile Approach for the Mass Production of Submicro/Micro Poly (Lactic Acid) Fibrous Mats and Their Cytotoxicity Test towards Neural Stem Cells. BioMed Research International, 2016, 1-12. Disponible

Hamidian, A., Sarshar, Z., & Stuart, P. R. (2016). Techno-Economic Analysis of Continuous Biodrying Process in Conjunction with Gasification Process at Pulp and Paper Mills. Drying Technology, 35(3), 300-311. Lien externe

Heli, B., Morales-Narvaez, E., Golmohammadi, H., Ajji, A., & Merkoci, A. (2016). Modulation of population density and size of silver nanoparticles embedded in bacterial cellulose via ammonia exposure: visual detection of volatile compounds in a piece of plasmonic nanopaper. Nanoscale, 8(15), 7984-7991. Lien externe

Hidayat, T., Shishin, D., Decterov, S., & Jak, E. (2016). Thermodynamic Optimization of the Ca-Fe-O System. Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 47(1), 256-281. Lien externe

Hollender, M., Chioua, M., Hoernicke, M., & Marco, V. R. (2016). Method for Root analysis of an alarm flood sequence. (Demande de brevet no EP3026518). Lien externe

Hudon, S. (2016). Étude comparative d'une opération d'enrobage à sec et de granulation à sec par compacteur à rouleaux en vue d'une application de granulation à sec miniature à opération continue [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible

J

Jak, E., Hidayat, T., Shishin, D., Mehrjardi, A. F., Chen, J., Decterov, S., & Hayes, P. (mai 2016). Integrated experimental and modelling research for non-ferrous smelting and recycling systems [Communication écrite]. 10th International Conference on Molten Slags, Fluxes and Salts (Molten 2016), Seattle, Washington. Lien externe

Jalali Dil, E., Arjmand, M., Li, Y., Sundararaj, U., & Favis, B. D. (2016). Assembling copper nanowires at the interface and in discrete phases in PLA-based polymer blends. European Polymer Journal, 85, 187-197. Lien externe

Jalali Dil, E., Virgilio, N., & Favis, B. D. (2016). The effect of the interfacial assembly of nano-silica in poly(lactic acid)/poly(butylene adipate-co-terephthalate) blends on the morphology, rheology and mechanical properties. European Polymer Journal, 85, 635-646. Lien externe

Jalliffier-Verne, I., Heniche, M., Madoux-Humery, A.-S., Galarneau, M., Servais, P., Prévost, M., & Dorner, S. (2016). Cumulative effects of fecal contamination from combined sewer overflows: Management for source water protection. Journal of Environmental Management, 174, 62-70. Lien externe

Jauzein, T. (2016). Mise en forme et caractérisation des mélanges polylactide/copolymère éther-amide [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible

Javanbakht, T., Bérard, A., & Tavares, J. R. (2016). Polyethylene glycol and poly(vinyl alcohol) hydrogels treated with photo-initiated chemical vapor deposition. Canadian Journal of Chemistry/Revue canadienne de chimie, 94(9), 744-750. Disponible

Javanbakht, T., Laurent, S., Stanicki, D., Raphael, W., & Tavares, J. R. (2016). Erratum: Charge effect of superparamagnetic iron oxide nanoparticles on their surface functionalization by photo-initiated chemical vapour deposition. Journal of Nanoparticle Research, 18(11), 1 page. Lien externe

Javanbakht, T., Raphael, W., & Tavares, J. R. (2016). Erratum: Physicochemical Properties of Cellulose Nanocrystals Treated by Photo-Initiated Chemical Vapour Deposition (PICVD). Canadian Journal of Chemical Engineering, 94(12), 2436-2436. Lien externe

Javanbakht, T., Raphael, W., & Tavares, J. R. (2016). Physicochemical properties of cellulose nanocrystals treated by photo-initiated chemical vapour deposition (PICVD). Canadian Journal of Chemical Engineering, 94(6), 1135-1139. Disponible

K

Kabbara, M., Gancheva, T., Gazil, O., & Virgilio, N. (2016). Preparation of Porous Organogels Using Water Soluble Polymer Templates. Macromolecular Chemistry and Physics, 217(18), 2081-2088. Lien externe

Kafrouni, L., & Savadogo, O. (2016). Recent progress on magnetic nanoparticles for magnetic hyperthermia. Progress in Biomaterials, 5(3-4), 147-160. Disponible

Kang, Y.-B., & Chartrand, P. (2016). Calculation of property diagram as a zero-phase fraction line of auxiliary phase. Calphad-Computer Coupling of Phase Diagrams and Thermochemistry, 55, 69-75. Lien externe

Kang, Z., Robelin, C., He, M., & Chartrand, P. (2016). Thermodynamic evaluation and optimization of the (KF + YF₃), (KCl + YCl₃) and (YF₃ + YbF₃) binary systems. Journal of Chemical Thermodynamics, 98, 242-253. Lien externe

Kannangara, M., Marinova, M., Fradette, L., & Paris, J. (2016). Effect of mixing hydrodynamics on the particle and filtration properties of precipitated lignin. Chemical Engineering Research and Design, 105, 94-106. Lien externe

Kannangara, M., Marinova, M., Perrier, M., & Paris, J. (2016). Forest Biomass and Paper Industry, a Pathway to Green Biofuels. Athens Journal of Technology & Engineering, 3(2), 119-132. Lien externe

Karami, S., & Lafleur, P. (2016). Toughening of polylactide nanocomposites with an ethylene alkyl acrylate copolymer: Effects of the addition of nanoparticles on phase morphology and fracture mechanisms. Polymer Engineering & Science, 56(12), 1415-1424. Lien externe

Karengera, E., De Crescenzo, G., Durocher, Y., & Henry, O. (mai 2016). Improving the metabolic efficiency of mammalian cells and its impact on glycoproteins quality [Affiche]. Cell Culture Engineering XV, Palm Spring (CA). Non disponible

Kasparek, E., Tavares, J. R., Wertheimer, M. R., & Girard-Lauriault, P.-L. (mai 2016). Fabrication and characterization of photo- and plasma-chemically deposited thiol-terminated films for biomedical applications [Affiche]. 10th World Biomaterials Congress, Montréal, Québec. Publié dans Frontiers in Bioengineering and Biotechnology, 4. Disponible

Kasparek, E., Tavares, J. R., Wertheimer, M. R., & Girard-Lauriault, P.-L. (2016). Sulfur-rich organic films deposited by plasma- and vacuum-ultraviolet (VUV) photo-polymerization. Plasma Processes and Polymers, 13(9), 888-899. Disponible

Kumar, P. (2016). Conducting Polymers and Natural Molecular Materials for Bioelectronics and Energy Storage [Thèse de doctorat, École Polytechnique de Montréal]. Disponible

Kumar, P., Di Mauro, E., Zhang, S., Pezzella, A., Soavi, F., Santato, C., & Cicoira, F. (2016). Melanin-based flexible supercapacitors. Journal of Materials Chemistry C, 4(40), 9516-9525. Lien externe

L

Labonté, V. (2016). Déposition d'un revêtement organique par voie photochimique sur des particules employées dans le contrôle qualité des médicaments injectables [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible

Labonté, V., Marion, A., Virgilio, N., & Tavares, J. R. (2016). Correction to “Gas-Phase Surface Engineering of Polystyrene Beads Used to Challenge Automated Particles Inspection Systems”. Industrial & Engineering Chemistry Research, 55(41), 11035-11035. Lien externe

Labonté, V., Marion, A., Virgilio, N., & Tavares, J. R. (2016). Gas-phase surface engineering of polystyrene beads used to challenge automated particle inspection systems. Industrial & Engineering Chemistry Research, 55(27), 7362-7372. Disponible

Lantz, F., Jayet, P.-A., Assaiante, C., Després, G., Ben, N., Fradj, A. I., Patouillard, L., & Clodic, M. (mars 2016). Une analyse du développement des biocarburants en Europe à partir des modélisations du secteur agricole, de production des biocarburants et du raffinage [Communication écrite]. 5th Thematic Workshop of the FAERE, Rennes, France. Non disponible

Lassaigne, M., Blais, B., Fradette, L., & Bertrand, F. (2016). Experimental investigation of the mixing of viscous liquids and non-dilute concentrations of particles in a stirred tank. Chemical Engineering Research and Design, 108, 55-68. Lien externe

Latifi, M., & Chaouki, J. (mai 2016). Induction heating fluidized bed reactor for coal-based cofiring tests [Communication écrite]. Fluidization XV, Québec, Québec. Lien externe

Latifi, M., Aghaee Sarbarze, A., & Chaouki, J. (janvier 2016). Gas-Phase Carbon Coating of Nanoparticles for Rechargeable Batteries [Présentation]. Dans Fluidization XV, Montebello, Québec. Non disponible

Latifi, M., Briens, C., & Berruti, F. (juin 2016). Catalytic Property of Olivine for Bio-oil Gasification [Communication écrite]. 5th International Conference on Grees Process Engineering (GPE 2016), Mont Tremblant, Quebec. Non disponible

Latifi, M., Rakib, A., Sauriol, P., Shabanian, J., & Chaouki, J. (juin 2016). Co-combustion of coal and a re-engineered feedstock for emissions reduction [Communication écrite]. 5th International Conference on Green Process Engineering (GPE 2016), Mont Tremblant, Québec. Lien externe

Latifi, M., Rakib, A., Sauriol, P., Shabanian, J., & Chaouki, J. (juin 2016). Co-combustion of coal and a reengineered feedstock for emissions reduction [Communication écrite]. 5th International Congress on Green Process Engineering (GPE 2016), Fairmont Tremblant Hotel, Mont Tremblant, Quebec, Canada. Lien externe

Laurent, A.-B., Menard, J.-F., Lesage, P., & Beauregard, R. (2016). Cradle-to-Gate Environmental Life Cycle Assessment of the Portfolio of an Innovative Forest Products Manufacturing Unit. BioResources, 11(4), 8981-9001. Lien externe

Lauzon, M.-A., Drevelle, O., Daviau, A., & Faucheux, N. (2016). Effects of BMP-9 and BMP-2 on the PI3K/Akt pathway in MC3T3-E1 preosteoblasts. Tissue Engineering Part A, 22(17-18), 1075-1085. Lien externe

Leclerc, P., Doucet, J., & Chaouki, J. (mai 2016). Kinetic of polystyrene pyrolysis in a microwave TGA [Communication écrite]. 21st International Symposium on Analytical and Applied Pyrolysis, Nancy, France. Non disponible

Lenfant, G. (2016). Propriétés rhéologiques de suspensions aqueuses de cellulose nanocristalline modifiée ou non [Thèse de doctorat, École Polytechnique de Montréal]. Disponible

Lequoy, P., Murschel, F., Liberelle, B., Lerouge, S., & De Crescenzo, G. (2016). Controlled co-immobilization of EGF and VEGF to optimize vascular cell survival. Acta Biomaterialia, 29, 239-247. Lien externe

Lequoy, P., Savoji, H., Saoudi, B., Bertrand-Grenier, A., Wertheimer, M. R., De Crescenzo, G., Soulez, G., & Lerouge, S. (2016). In Vitro and Pilot In Vivo Evaluation of a Bioactive Coating for Stent Grafts Based on Chondroitin Sulfate and Epidermal Growth Factor. Journal of Vascular and Interventional Radiology, 27(5), 753-760. Lien externe

Levasseur, A., Cavalett, O., Fuglestvedt, J. S., Gasser, T., Johansson, D. J. A., Jørgensen, S. V., Raugei, M., Reisinger, A., Schivley, G., Strømman, A., Tanaka, K., & Cherubini, F. (2016). Enhancing life cycle impact assessment from climate science: Review of recent findings and recommendations for application to LCA. Ecological Indicators, 71, 163-174. Lien externe

Li, X., Mehr, N. G., Favis, B. D., De Crescenzo, G., Yakandawala, N., & Hoemann, C. D. (août 2016). Fusion peptide P15-CSP coatings promote in vitro osteogenesis in 84 and 141 micron pores of 3-D poly(epsilon-caprolactone) scaffolds [Communication écrite]. 25th International Materials Research Congress (IMRC 2016), Cancún, Mexico. Non disponible

Lin, C., Wang, S., Chen, G., Wang, K., Cheng, Z., Lu, X., & Li, C. (2016). Thermodynamic evaluation of the BaO-ZrO2-YO1.5 system. Ceramics International, 42(12), 13738-13747. Lien externe

Lin, Z., Buschmann, M. D., & Savard, P. (2016). Mechanical loading of knee articular cartilage induced by muscle contraction can be assessed by measuring electrical potentials at the surface of the knee. Journal of Biomechanics, 49(3), 338-343. Lien externe

Lotfi, S., Boffito, D. C., & Patience, G. S. (2016). Gas-solid conversion of lignin to carboxylic acids. Reaction Chemistry & Engineering, 1(4), 397-408. Lien externe

M

Ma, Z., Ouzilleau, P., Trevisanut, C., Neagoe, C., Lotfi, S., Boffito, D. C., & Patience, G. S. (2016). Partial oxidation of methane to syngas over Pt/Rh/MgO catalyst supported on FeCralloy woven fibre. Canadian Journal of Chemical Engineering, 94(4), 642-649. Lien externe

Ma, Z., Trevisanut, C., Neagoe, C., Boffito, D. C., Jazayeri, S. M., Jagpal, C., & Patience, G. S. (2016). A micro-refinery to reduce associated natural gas flaring. Sustainable Cities and Society, 27, 116-121. Lien externe

Maani, A., & Carreau, P. (2016). Rheological and morphological properties of thermoplastic olefin blends containing nanosilica. Journal of Non-Newtonian Fluid Mechanics, 233, 95-106. Lien externe

Majeau-Bettez, G. (mai 2016). Greater transparency in consequential lifecycle assessment and general equilibrium models through structural path decomposition analysis [Communication écrite]. Society and Materials International Conference (SAM 10), Rome, Italy. Non disponible

Majeau-Bettez, G., Pauliuk, S., Wood, R., Bouman, E. A., & Strømman, A. H. (2016). Balance issues in input–output analysis: A comment on physical inhomogeneity, aggregation bias, and coproduction. Ecological Economics, 126, 188-197. Disponible

Majeau-Bettez, G., Wood, R., & Strømman, A. H. (2016). On the financial balance of input–output constructs: revisiting an axiomatic evaluation. Economic Systems Research, 28(3), 333-343. Disponible

Majeau-Bettez, G., Wood, R., Hertwich, E. G., & Stromman, A. H. (2016). When Do Allocations and Constructs Respect Material, Energy, Financial, and Production Balances in LCA and EEIO? Journal of Industrial Ecology, 20(1), 67-84. Lien externe

Martinu, L., Habibzadeh, S., Sapieha, J.-E., Zabeida, O., & Chaouki, J. (mai 2016). Surface engineering and vapor phase technologies for coating and functionalizing complex objects and small particles [Communication écrite]. Fluidization XV, Montebello, Québec. Lien externe

Mary, G., Esmaeili, A., & Chaouki, J. (2016). Simulation of the selective hydrogenation of C3-Cut in the liquid phase. International Journal of Chemical Reactor Engineering, 14(4), 859-874. Lien externe

Mathieu, C., Cheng, A. P., Fong, D., Diab, K., Mccormack, R., El Gabalawy, H., & Hoemann, C. D. (mai 2016). Relationship of UDP-glucose dehydrogenase activity and in vitro hyaluronic acid release by human fibroblast-like synoviocytes [Affiche]. 10th World Biomaterials Congress, Montréal, Québec. Publié dans Frontiers in Bioengineering and Biotechnology, 4. Disponible

Matte-Deschênes, G., Vidal, D., Bertrand, F., & Hayes, R. E. (2016). Numerical investigation of the impact of thermophoresis on the capture efficiency of diesel particulate filters. The Canadian Journal of Chemical Engineering, 94(2), 291-303. Disponible

Mechmech, F., Marinova, M., Chadjaa, H., Rahni, M., Ben Akacha, N., & Gargouri, M. (2016). Co-fermentation of alfalfa juice and hardwood hydrolysate for butanol production in combined biorefinery systems. Industrial Crops and Products, 89, 29-33. Lien externe

Méthot, S., Changoor, A., Tran-Khanh, N., Hoemann, C. D., Stanish, W. D., Restrepo, A., Shive, M. S., & Buschmann, M. D. (2016). Osteochondral Biopsy Analysis Demonstrates That BST-CarGel Treatment Improves Structural and Cellular Characteristics of Cartilage Repair Tissue Compared With Microfracture. CARTILAGE, 7(1), 16-28. Lien externe

Meyssonnier, A. (2016). Développement d'un indicateur d'effet écotoxicologique terrestre pour le cuivre basé sur l'activité enzymatique [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible

Mezbahul-Islam, M., Belanger, F., Chartrand, P., Jung, I.-H., & Coursol, P. (2016). Application of thermodynamic calculations to the pyro-refining process for production of high purity bismuth. Metallurgical and Materials Transactions B, 48(1), 73-90. Lien externe

Milovanoff, A. (2016). Optimisation environnementale de la gestion des consommations électriques en temps réel [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible

Milovanoff, A., Dandres, T., & Samson, R. (octobre 2015). Optimization of Energy Consumption in Smart Homes: A New LCA-Based Demand Side Management Program [Communication écrite]. 1st International Conference on Social Innovation and Community Aspects of Smart Cities (SmartCityCom), Bratislava, SLOVAKIA. Non disponible

Moayeri, A., & Ajji, A. (2016). Core-Shell Structured Graphene Filled Polyaniline/Poly(methyl methacrylate) Nanofibers by Coaxial Electrospinning. Nanoscience and Nanotechnology Letters, 8(2), 129-134. Lien externe

Mousseau, N., Simon, R., Savadogo, O., & Simard, J.-M. (2016). Synthèse des meilleures pratiques de circularité hors Québec pour les métaux en général et, lorsque disponibles pour les métaux étudiés. Rapport 2 - Métaux et économie circulaire au Québec. (Rapport technique). Non disponible

Mudraboyina, B. P., Farag, S., Banerjee, A., Chaouki, J., & Jessop, P. G. (2016). Supercritical fluid rectification of lignin pyrolysis oil methyl ether (LOME) and its use as a bio-derived aprotic solvent. Green Chemistry, 18(7), 2089-2094. Lien externe

Muller, S., Lesage, P., & Samson, R. (2016). Giving a scientific basis for uncertainty factors used in global life cycle inventory databases: an algorithm to update factors using new information. International Journal of Life Cycle Assessment, 21(8), 1185-1196. Lien externe

Muller, S., Lesage, P., Ciroth, A., Mutel, C., Weidema, B. P., & Samson, R. (2016). The application of the pedigree approach to the distributions foreseen in ecoinvent v3. International Journal of Life Cycle Assessment, 21(9), 1327-1337. Lien externe

Murschel, F., Fortier, C., Hodges, R., Jolicoeur, M., & De Crescenzo, G. (mai 2016). Coiled-coil interactions: a versatile bioaffinity system for the oriented immobilization and tunable release of biomolecules from biomaterials [Affiche]. 10th World Biomaterials Congress, Montréal, Québec. Publié dans Frontiers in Bioengineering and Biotechnology, 4. Disponible

Murschel, F., Fortier, C., Jolicoeur, M., De Crescenzo, G., & Hodges, R. S. (octobre 2016). Controlled release of growth factors from biomaterials using coiled-coil interactions [Communication écrite]. 66th Canadian Chemical Engineering Conference, Québec City, Qc. Non disponible

Murschel, F., Zaimi, A., Noël, S., Jolicoeur, M., & De Crescenzo, G. (mai 2016). Amphiphilic coil-tags for the direct and oriented adsorption of growth factors on biomaterials [Autre type de communication de conférence]. 10th World Biomaterials Congress, Montréal, Québec. Publié dans Frontiers in Bioengineering and Biotechnology, 4. Disponible

N

Nasri Lari, H., Chaouki, J., & Tavares, J. R. (mai 2016). De-agglomeration of nanoparticles in an impactor-assisted fluidized bed [Communication écrite]. Fluidization XV, Québec, Québec. Lien externe

Natale, G., Ausias, G., Ferec, J., Heuzey, M.-C., & Carreau, P. (2016). Modeling interactions in carbon nanotube suspensions: Transient shear flow. Journal of Rheology, 60(6), 1069-1083. Lien externe

Neagoe, C., Boffito, D. C., Ma, Z., Trevisanut, C., & Patience, G. S. (2016). Pt on Fecralloy catalyses methane partial oxidation to syngas at high pressure. Catalysis Today, 270, 43-50. Lien externe

Nguwuo Petuenju, E., & Savadogo, O. (2016). Characterization of CuInS2thin films grown by transducer-based ultrasonic spray pyrolysis for PV solar cells applications. Journal of New Materials for Electrochemical Systems, 19(3), 169-179. Lien externe

Noel, S., Fortier, C., Murschel, F., Belzil, A., Gaudet, G., Jolicoeur, M., & De Crescenzo, G. (2016). Co-immobilization of adhesive peptides and VEGF within a dextran-based coating for vascular applications. Acta Biomaterialia, 37, 69-82. Lien externe

Nofar, M., Heuzey, M.-C., Carreau, P., & Kamal, M. R. (2016). Effects of nanoclay and its localization on the morphology stabilization of PLA/PBAT blends under shear flow. Polymer, 98, 353-364. Lien externe

Nofar, M., Heuzey, M.-C., Carreau, P., Kamal, M. R., & Randall, J. (2016). Coalescence in PLA-PBAT blends under shear flow: Effects of blend preparation and PLA molecular weight. Journal of Rheology, 60(4), 637-648. Lien externe

Núñez, M., Bouchard, C. R., Bulle, C., Boulay, A.-M., & Margni, M. (2016). Critical analysis of life cycle impact assessment methods addressing consequences of freshwater use on ecosystems and recommendations for future method development. International Journal of Life Cycle Assessment, 21(12), 1799-1815. Lien externe

O

Ouyang, W., Buschmann, M. D., & Chevrier, A. (2016). Soluble physiological chitosan formulations combined with platelet-rich plasma (PRP) for tissue repair. (Brevet no US9427469). Lien externe

Ouzilleau, P., Gheribi, A. E., & Chartrand, P. (2016). The graphitization temperature threshold analyzed through a second-order structural transformation. Carbon, 109, 896-908. Lien externe

Ouzilleau, P., Gheribi, A. E., & Chartrand, P. (mai 2016). Le seuil de graphitisation traité par une approche structurelle et thermodynamique [Présentation]. Dans Colloque annuel de la Société Francophone d'Études des Carbones (SFEC 2016), Carqueiranne, France.. Non disponible

Ouzilleau, P., Gheribi, A. E., Lindberg, D. K., & Chartrand, P. (2016). A Size-Dependent Thermodynamic Model for Coke Crystallites: The Carbon-Sulfur System Up to 2500 K (2227 °C). Metallurgical and Materials Transactions B, 47(3), 1817-1831. Lien externe

P

Patience, G. S., & Boffito, D. C. (2016). Gas-to-liquids processes: Preface. Canadian Journal of Chemical Engineering, 94(4), 605-606. Lien externe

Patience, G. S., & Boffito, D. C. (2016). Method and apparatus for producing chemicals from a methane-containing gas. (Brevet no US9243190). Lien externe

Patience, G. S., Boffito, D. C., & Patience, P. A. (2016). How do you write and present research well? 12-Design graphs to fit within the journal column width. Canadian Journal of Chemical Engineering, 94(9), 1629-1632. Lien externe

Patience, G. S., Boffito, D. C., & Patience, P. A. (2016). How do you write and present research well? 16-Target an audience and promote. Canadian Journal of Chemical Engineering, 94(10), 1838-1840. Lien externe

Patience, G. S., Boffito, D. C., & Patience, P. A. (2016). How do you write and present research well? 17-Submit your manuscript to the journal you cite most. Canadian Journal of Chemical Engineering, 94(11), 2174-2178. Lien externe

Patience, G. S., Boffito, D. C., & Patience, P. A. (2016). How do you write and present research well? 20-State the novelty of your research explicitly. Canadian Journal of Chemical Engineering, 94(12), 2240-2242. Lien externe

Patience, G. S., Boffito, D. C., & Patience, P. A. (2016). How do you write and present research well? 3 - Shave your text with Occam's razor. Canadian Journal of Chemical Engineering, 94(1), 3-6. Lien externe

Patience, G. S., Boffito, D. C., & Patience, P. A. (2016). How do you write and present research well? 4 - Do not metastasize with metadiscourse. Canadian Journal of Chemical Engineering, 94(2), 205-208. Lien externe

Patience, G. S., Boffito, D. C., & Patience, P. A. (2016). How do you write and present research well? 5 - Revise sentences over 30 words long. Canadian Journal of Chemical Engineering, 94(3), 405-407. Lien externe

Patience, G. S., Boffito, D. C., & Patience, P. A. (2016). How do you write and present research well? 6 - Tell it in the title. Canadian Journal of Chemical Engineering, 94(4), 713-715. Lien externe

Patience, G. S., Boffito, D. C., & Patience, P. A. (2016). Response to 'Comment on "How do you write and present research well?"' [Commentaire ou lettre]. Canadian Journal of Chemical Engineering, 94(1), 201-201. Lien externe

Patience, G. S., Boffito, D. C., Darabi-Mahboub, M. J., King, M., & Patience, P. A. (2016). How do you write and present research well? 18-Publish and flourish. Canadian Journal of Chemical Engineering, 94(11), 2179-2185. Lien externe

Patience, G. S., Patience, C. A., Bertrand, F., Patience, P. A., & Boffito, D. C. (2016). How do you write and present research well? 19-Emulate articles in high impact factor journals. Canadian Journal of Chemical Engineering, 94(12), 2237-2239. Lien externe

Patience, G. S., Patience, C. A., Boffito, D. C., Patience, P. A., & Bertrand, F. (2016). How do you write and present research well? 7 - Cite to get cited. Canadian Journal of Chemical Engineering, 94(5), 805-808. Lien externe

Patience, G. S., Srinivisan, B., Perrier, M., Boffito, D. C., & Patience, P. A. (2016). How do you write and present research well? 9 - Show and state what error bars represent. Canadian Journal of Chemical Engineering, 94(7), 1221-1224. Lien externe

Patience, P. A., Boffito, D. C., & Patience, G. S. (2016). How do you write and present research well? 11 - Respect SI writing conventions. Canadian Journal of Chemical Engineering, 94(8), 1431-1434. Lien externe

Patience, P. A., Boffito, D. C., & Patience, G. S. (2016). How do you write and present research well? 14-Favour images over text in graphical abstracts. Canadian Journal of Chemical Engineering, 94(9), 1636-1639. Lien externe

Pauliuk, S., Majeau-Bettez, G., Müller, D. B., & Hertwich, E. G. (2016). Toward a Practical Ontology for Socioeconomic Metabolism. Journal of Industrial Ecology, 20(6), 1260-1272. Lien externe

Pavelka, M., Klika, V., Esen, O. , & Grmela, M. (2016). A hierarchy of Poisson brackets in non-equilibrium thermodynamics. Physica D: Nonlinear Phenomena, 335, 54-69. Lien externe

Pelton, A., & Kang, Y.-B. (2016). Regarding “Sulfide Capacity in Ladle Slag at Steelmaking Temperatures,” C. Allertz, Du Sichen; MMTB 2015 December. Metallurgical and Materials Transactions B, 47(6), 3241-3243. Lien externe

Perez Linares, D. (2016). Modeling and Simulation of an Aircraft Environmental Control System [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible

Perreault, P. (2016). Modélisation cinétique de la réduction de minerais par le monoxyde de carbone utilisés dans le procédé de combustion en boucle chimique [Thèse de doctorat, École Polytechnique de Montréal]. Disponible

Perreault, P., & Patience, G. S. (2016). Carbonation and deactivation kinetics of a mixed calcium oxidecopper oxide sorbent/oxygen carrier for post-combustion carbon dioxide capture. Chemical Engineering Journal, 306, 726-733. Lien externe

Perreault, P., & Patience, G. S. (2016). Chemical looping syngas from CO₂ and H₂O over manganese oxide minerals. Canadian Journal of Chemical Engineering, 94(4), 703-712. Lien externe

Perreault, P., & Patience, G. S. (2016). Ilmenite-CO reduction kinetics. Fuel, 165, 166-172. Lien externe

Perreault, P., & Patience, G. S. (2016). Pyrolusite-CO reduction kinetics. Chemical Engineering Journal, 295, 227-236. Lien externe

Perreault, P., Rifflart, S., Nguyen, E., & Patience, G. S. (2016). Pyrolusite: An alternative oxygen carrier for chemical looping combustion. Fuel, 185, 630-638. Lien externe

Picard, F., & Chaouki, J. (2016). Selective extraction of heavy metals from two real calcium-rich contaminated soils by a modified NTA. Journal of Hazardous Materials, 318, 48-53. Lien externe

Picard, F., & Chaouki, J. (2016). Sodium hypochlorite oxidation of petroleum aliphatic contaminants in calcareous soils. Chemosphere, 145, 200-206. Lien externe

Pickenhahn, V. D., Lavertu, M., Buschmann, M. D., De Crescenzo, G., & Darras, V. (2016). Conjugated chitosans and method of use and of making same. (Demande de brevet no WO2016101068). Lien externe

Plouffe, G., Bulle, C., & Deschênes, L. (2016). Characterization factors for zinc terrestrial ecotoxicity including speciation. International Journal of Life Cycle Assessment, 21(4), 523-535. Lien externe

Prudent, M., Rochat, B., Goffaux, G., Marvin, L., Stauber, F., Tissot, J., Jolicoeur, M., & Lion, N. (2016). Dynamic Metabolic Flux Analysis of Stored Red Blood Cells. Transfusion, 56(S4), 25A-25A. Lien externe

R

Rasouli, M., Bertrand, F., & Chaouki, J. (novembre 2016). Differences in the Dynamics of Cylindrical and Spherical Particles in a Rotating Drum Using Multiple Radioactive Particle Tracking [Communication écrite]. AIChE Annual Meeting, San Francisco, Calif.. Lien externe

Rasouli, M., Dubé, O., Bertrand, F., & Chaouki, J. (2016). Investigating the dynamics of cylindrical particles in a rotating drum using multiple radioactive particle tracking. AICHE Journal, 62(8), 2622-2634. Lien externe

Recio Garrido, D. (2016). Dynamic Modeling, Monitoring and Control of Staged Microbial Fuel Cells [Thèse de doctorat, École Polytechnique de Montréal]. Disponible

Recio-Garrido, D., Perrier, M., & Tartakovsky, B. (2016). Combined bioelectrochemical-electrical model of a microbial fuel cell. Bioprocess and Biosystems Engineering, 39(2), 267-276. Lien externe

Recio-Garrido, D., Perrier, M., & Tartakovsky, B. (2016). Modeling, optimization and control of bioelectrochemical systems. Chemical Engineering Journal, 289, 180-190. Lien externe

Recio-Garrido, D., Tartakovsky, B., & Perrier, M. (juin 2016). Staged Microbial Fuel Cells with Periodic Connection of External Resistance [Communication écrite]. 11th IFAC Symposium on Dynamics and Control of Process Systems, including Biosystems (IFAC DYCOPS-CAB 2016), Trondheim, Norway. Publié dans IFAC-PapersOnLine, 49(7). Lien externe

Ren, X., Chen, J., Deschênes, J.-S., Tremblay, R., & Jolicoeur, M. (2016). Glucose feeding recalibrates carbon flux distribution and favours lipid accumulation in Chlorella protothecoides through cell energetic management. Algal Research-Biomass Biofuels and Bioproducts, 14, 83-91. Lien externe

Riahi, N., Cappadocia, L., Henry, O., Omichinski, J., & De Crescenzo, G. (2016). Soluble expression, purification and functional characterization of a coil peptide composed of a positively charged and hydrophobic motif. Amino Acids, 48(2), 567-577. Lien externe

Ridoutt, B. G., Pfister, S., Manzardo, A., Bare, J., Boulay, A.-M., Cherubini, F., Fantke, P., Frischknecht, R., Hauschild, M., Henderson, A., Jolliet, O., Levasseur, A., Margni, M., McKone, T., Michelsen, O., Canals, L. M. , Page, G., Pant, R., Raugei, M., ... Verones, F. (2016). Area of concern: a new paradigm in life cycle assessment for the development of footprint metrics. International Journal of Life Cycle Assessment, 21(2), 276-280. Lien externe

Ridoutt, B., Pfister, S., Manzardo, A., Bare, J., Boulay, A.-M., Cherubini, F., Fantke, P., Frischknecht, R., Hauschild, M. Z., Henderson, A., Jolliet, O., Levasseur, A., Margni, M., McKone, T., Michelsen, O., Mila i Canals, L., Page, G., Pant, R., Raugei, M., ... Verones, F. (octobre 2016). Mainstreaming life cycle thinking through a consistent approach to footprints [Résumé]. 12th Biennial International Conference on Ecobalance (EcoBalance 2016), Kyoto, Japan. Lien externe

Riekstin, A. C., Dandres, T., Kim Khoa, N., Samson, R., & Cheriet, M. (octobre 2016). Monitoring and measurement system for green operation of geographically distributed ICT services [Communication écrite]. 12th International Conference on Network and Service Management (CNSM 2016), Montréal, Québec. Lien externe

Robelin, C. (2016). Models for the thermodynamic properties of molten salt systems: Perspectives for ionic liquids. Fluid Phase Equilibria, 409, 482-494. Lien externe

Robelin, C., Gemme, F., & Chartrand, P. (juillet 2016). Thermodynamic models for salt systems used for the production of fertilizers [Communication écrite]. EUCHEM Conference on Molten Salts and Ionic Liquids XXVI, Vienna, Austria. Non disponible

Rueda, C., Marinova, M., Paris, J., Ruiz, G., & Coz, A. (2016). Technoeconomic assessment of different biorefinery approaches for a spent sulfite liquor. Journal of Chemical Technology & Biotechnology, 91(10), 2646-2653. Lien externe

S

Saadatkhah, N., Patience, G. S., Boffito, D. C., Rigamonti, M. G., Aghamiri, S.F., & Talaie, M. R. (mai 2016). Catalyst preparation for fluidized bed reactors by spray drying [Communication écrite]. Fluidization XV, Montebello, Canada. Lien externe

Sabri, F., Berthomier, K., Marion, A., Fradette, L., Tavares, J. R., & Virgilio, N. (octobre 2016). Design and characterization of surface modified silica nanoparticles with stimuli-sensitive and reversible aggregation/disaggregation behavior [Présentation]. Dans 66th Canadian Chemical Engineering Conference, Québec, Québec. Non disponible

Sabri, F., Fradette, L., Tavares, J. R., & Virgilio, N. (mars 2016). Design and characterization of surface modified microparticles with stimuli-sensitive and reversible aggregation/disaggregation behavior [Communication écrite]. McGill-Polytechnique Chemical Engineering Research Day, Montréal, Québec. Lien externe

Saffar, A., Jalali Dil, E., Carreau, P., Ajji, A., & Kamal, M. R. (2016). Phase behavior of binary blends of PP/PP‐g‐AA: limitations of the conventional characterization techniques. Polymer International, 65(5), 508-515. Lien externe

Salomé, S., Ferraria, A. M., Botelho do Rego, A. M., Alcaide, F., Savadogo, O., & Rego, R. (2016). Enhanced activity and durability of novel activated carbon-supported PdSn heat-treated cathode catalyst for polymer electrolyte fuel cells. Electrochimica Acta, 192, 268-282. Lien externe

Samih, S. (2016). Développement d'un analyseur thermogravimétrique à lit fluidisé : application à la gazéification catalytique du charbon [Thèse de doctorat, École Polytechnique de Montréal]. Disponible

Samih, S., & Chaouki, J. (mai 2016). Catalytic ash free coal gasification in a fluidized bed thermogravimetric analyzer [Présentation]. Dans 15th International Conference on Fluidization (Fluidization for Emerging Green Technologies), Montebello, Québec. Lien externe

Sanhye, W., Dubois, C., Laroche, I., & Pelletier, P. (2016). Numerical modeling of the cooling cycle and associated thermal stresses in a melt explosive charge. AICHE Journal, 62(10), 3797-3811. Lien externe

Savoji, H., Maire, M., Lequoy, P., Liberelle, B., De Crescenzo, G., Ajji, A., Wertheimer, M. R., & Lerouge, S. (2016). Combining electrospun fiber mats and bioactive coatings for vascular graft prostheses. Biomacromolecules, 18(1), 303-310. Lien externe

Savoji, H., Maire, M., Lequoy, P., Liberelle, B., De Crescenzo, G., Wertheimer, M. R., Ajji, A., & Lerouge, S. (mai 2016). Chondroitin sulfate-oriented epidermal growth factor (EGF) coating for random and aligned electrospun vascular grafts [Affiche]. 10th World Biomaterials Congress (WBC 2016), Montréal, Canada. Publié dans Frontiers in Bioengineering and Biotechnology, 4. Disponible

Schagemann, J. C., Rudert, N., Taylor, M. E., Sim, S., Quenneville, E., Garon, M., Klinger, M., Buschmann, M. D., & Mittelstaedt, H. (2016). Bilayer Implants: Electromechanical Assessment of Regenerated Articular Cartilage in a Sheep Model. CARTILAGE, 7(4), 346-360. Lien externe

Seifitokaldani, A., Gheribi, A. E., & Dollé, M. (2016). On the limitation of density functional theory (DFT) for the treatment of the anharmonicity in FCC metals. Solid State Communications, 247, 78-81. Lien externe

Seifitokaldani, A., Gheribi, A. E., Dollé, M., & Chartrand, P. Thermophysical Properties of LiFePO4: DFT+U Computations Combined with a Thermodynamically Self-Consistent (TSC) Method [Résumé]. 229th ECS Meeting, San Diego, CA, USA. Publié dans ECS Meeting Abstracts, MA2016-01(4). Lien externe

Seifitokaldani, A., Gheribi, A. E., Dolle, M., & Chartrand, P. (2016). Thermophysical properties of titanium and vanadium nitrides: Thermodynamically self-consistent approach coupled with density functional theory. Journal of Alloys and Compounds, 662, 240-251. Lien externe

Seifitokaldani, A., Gheribi, A. E., Phan, A. T., Chartrand, P., & Dollé, M. (2016). Important variation in vibrational properties of LiFePO4 and FePO4 induced by magnetism. Scientific Reports, 6(1), 1-10. Disponible

Shabanian, J., & Chaouki, J. (avril 2016). Effects of temperature, pressure, and interparticle forces on the hydrodynamics of a gas-solid fluidized bed: a review [Communication écrite]. FCC Alliance Scientific Workshop, Le Havre, France. Non disponible

Shabanian, J., & Chaouki, J. (2016). Fluidization characteristics of a bubbling gas-solid fluidized bed at high temperature in the presence of interparticle forces. Chemical Engineering Journal, 288, 344-358. Lien externe

Shabanian, J., & Chaouki, J. (2016). Influence of interparticle forces on solids motion in a bubbling gas-solid fluidized bed. Powder Technology, 299, 98-106. Lien externe

Shabanian, J., & Chaouki, J. (2016). Performance of a Catalytic Gas-Solid Fluidized Bed Reactor in the Presence of Interparticle Forces. International Journal of Chemical Reactor Engineering, 14(1), 433-444. Lien externe

Shabanian, J., & Chaouki, J. (2016). Performance of a Catalytic Gas-Solid Fluidized Bed Reactor in the Presence of Interparticle Forces. International Journal of Chemical Reactor Engineering, 14(1). Lien externe

Shabanian, J., & Chaouki, J. (mai 2016). Similarities between gas-solid fluidization in the presence of interparticle forces at high temperature and induced by a polymer coating approach [Communication écrite]. Fluidization XV, Montebello, Québec. Lien externe

Shahverdi-Shahraki, K., Ghosh, T., Mahajan, K., Ajji, A., & Carreau, P. (2016). Morphology and thermal properties of poly(ethylene terephthalate)-modified kaolin nanocomposites. Polymer Composites, 37(5), 1443-1452. Lien externe

Shishin, D., Hidayat, T., Decterov, S., & Jak, E. (mai 2016). Thermodynamic modelling of liquid slag-matte-metal equilibria applied to the simulation of the Peirce-Smith converter [Communication écrite]. 10th International Conference on Molten Slags, Fluxes and Salts (Molten 2016), Seattle, Washington. Lien externe

Shishin, D., Prostakova, V., Jak, E., & Decterov, S. (2016). Critical Assessment and Thermodynamic Modeling of the Al-Fe-O System. Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 47(1), 397-424. Lien externe

Spreutels, L., Chaouki, J., Bertrand, F., Haut, B., & Legros, R. (2016). Gas residence time distribution in a conical spouted bed. Powder Technology, 290, 62-71. Lien externe

Spreutels, L., Haut, B., Legros, R., Bertrand, F., & Chaouki, J. (2016). Experimental Investigation of Solid Particles Flow in a Conical Spouted Bed Using Radioactive Particle Tracking. AICHE Journal, 62(1), 26-37. Lien externe

T

Talebi-Esfandarani, M., & Savadogo, O. (2016). Improvement of electrochemical and electrical properties of LiFePO₄ coated with citric acid. Rare Metals, 35(4), 303-308. Lien externe

Talebi-Esfandarani, M., Rousselot, S., Gauthier, M., Sauriol, P., Duttine, M., Wattiaux, A., Liu, Y., Sun, A. X., Liang, G., & Dolle, M. (2016). Control of the LiFePO₄ electrochemical properties using low-cost iron precursor in a melt process. Journal of Solid State Electrochemistry, 20(12), 3481-3490. Lien externe

Talebi-Esfandarani, M., Rousselot, S., Gauthier, M., Sauriol, P., Liang, G., & Dolle, M. (2016). LiFePO₄ synthesized via melt synthesis using low-cost iron precursors. Journal of Solid State Electrochemistry, 20(7), 1821-1829. Lien externe

Talebi-Esfandarani, M., Rousselot, S., Jin, L., Bibienne, T., Chartrand, P., Sauriol, P., Seifitokaldani, A., & Dollé, M. (2016). Melt Synthesis of LiFePO4: Fundamentals, Versatility and Application. Meeting abstracts, MA2016-02(3), 503-503. Lien externe

Tavares, J. R., & Carabin, P. (2016). Method to maximize energy recovery in waste-to-energy process. (Brevet no US9447705). Lien externe

Tavares, J. R., Boffito, D. C., Patience, P. A., & Patience, G. S. (2016). How do you write and present research well? 15-Prepare to say less than you prepare. Canadian Journal of Chemical Engineering, 94(10), 1834-1837. Disponible

Tebianian, S., Dubrawski, K., Ellis, N., Cocco, R. A., Hays, R., Karri, S. B. R., Leadbeater, T. W., Parker, D. J., Chaouki, J., Jafari, R., Garcia-Trinanes, P., Seville, J. P. K., & Grace, J. R. (2016). Solids flux measurements via alternate techniques in a gas-fluidized bed. Chemical Engineering Journal, 306, 306-321. Lien externe

Tebianian, S., Dubrawski, K., Ellis, N., Cocco, R. A., Hays, R., Reddy Karri, S. B., Leadbeater, T. W., Parker, D. J., Chaouki, J., Jafari, R., Garcia-Trinanes, P., Seville, J. P. K., & Grace, J. R. (2016). Comparison of particle velocity measurement techniques in a fluidized bed operating in the square-nosed slugging flow regime. Powder Technology, 296, 45-52. Lien externe

Tebianian, S., Dubrawski, K., Ellisa, N., Grace, J. R., Leadbeater, T. W., Parker, D. J., Jafari, R., Chaouki, J., Garcia-Trinanes, P., & Seville, J. P. K. (mai 2016). Solid flux in travelling fluidized bed operating in square-nosed slugging regime [Communication écrite]. Fluidization XV, Montebello, Québec. Lien externe

Thibault, M., Lavertu, M., Astolfi, M., & Buschmann, M. D. (2016). Structure Dependence of Lysosomal Transit of Chitosan-Based Polyplexes for Gene Delivery. Molecular Biotechnology, 58(10), 648-656. Lien externe

Thibodeau, É., Gheribi, A. E., & In-Ho, J. (2016). A structural molar volume model for oxide melts part I: Li2O-Na2O-K2O-MgO-CaO-MnO-PbO-Al2O3-SiO2 melts-binary systems. Metallurgical and Materials Transactions B, 47(2), 1147-1164. Lien externe

Thibodeau, É., Gheribi, A. E., & In-Ho, J. (2016). A structural molar volume model for oxide melts Part III: Fe oxide-containing melts. Metallurgical and Materials Transactions B, 47(2), 1187-1202. Lien externe

Thibodeau, É., Gheribi, A. E., & Jung, I.-H. (2016). A Structural Molar Volume Model for Oxide Melts Part II: Li2O-Na2O-K2O-MgO-CaO-MnO-PbO-Al2O3-SiO2 Melts—Ternary and Multicomponent Systems. Metallurgical and Materials Transactions B, 47(2), 1165-1186. Lien externe

Toussaint, C., Henry, O., & Durocher, Y. (2016). Metabolic engineering of CHO cells to alter lactate metabolism during fed-batch cultures. Journal of Biotechnology, 217(C), 122-131. Disponible

Trevisanut, C., Jazayeri, S. M., Bonkane, S., Neagoe, C., Mohamadalizadeh, A., Boffito, D. C., Bianchi, C. L., Pirola, C., Visconti, C. G., Lietti, L., Abatzoglou, N., Frost, L., Lerou, J., Green, W., & Patience, G. S. (2016). Micro-syngas technology options for GtL. Canadian Journal of Chemical Engineering, 94(4), 613-622. Lien externe

Tromson, C. (2016). Amélioration de la modélisation des effets écotoxicologiques terrestres des métaux en évaluation des impacts du cycle de vie [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible

Trowell, K. A., Wang, J., Wang, Y., Yavor, Y., Goroshin, S., Bergthorson, J. M., Frost, D. L., St-Charles, J. C., & Dubois, C. (2016). Effect of particle coating on the thermal response of mixtures of micro- and nano-aluminum particles with water. Journal of Thermal Analysis and Calorimetry, 127(1), 1027-1036. Lien externe

Tsabet, È., & Fradette, L. (2016). Study of the properties of oil, particles, and water on particle adsorption dynamics at an oil/water interface using the colloidal probe technique. Chemical Engineering Research and Design, 109, 307-316. Lien externe

Turmo, A. (2016). Planification expérimentale dans la modélisation métabolique des cellules CHO [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible

V

Valitova, I., Kumar, P., Meng, X., Soavi, F., Santato, C., & Cicoira, F. (2016). Photolithographically patterned TiO₂ films for electrolyte-gated transistors. ACS Applied Materials & Interfaces, 8(23), 14855-14862. Lien externe

Vallée Schmitter, C. (2016). Évaluation de l'incertitude d'un modèle d'analyse de cycle de vie temporel de la production et de la consommation de l'électricité dans un contexte de gestion des centres de données [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible

Veilleux, D., Nelea, M., Biniecki, K., Lavertu, M., & Buschmann, M. D. (2016). Preparation of Concentrated Chitosan/DNA Nanoparticle Formulations by Lyophilization for Gene Delivery at Clinically Relevant Dosages. Journal of Pharmaceutical Sciences, 105(1), 88-96. Lien externe

Vekemans, O., & Chaouki, J. (2016). Municipal solid waste Co-firing in coal power plants: combustion performance. Dans Developments in combustion technology (p. 118-142). Lien externe

Vekemans, O., Laviolette, J.-P., & Chaouki, J. (2016). Co-combustion of coal and waste in pulverized coal boiler. Energy, 94, 742-754. Lien externe

Vekemans, O., Laviolette, J.-P., & Chaouki, J. (2016). Reduction of pulverized coal boiler's emissions through ReEngineered Feedstock co-combustion. Energy, 101, 471-483. Lien externe

Venereo-Sanchez, A., Gilbert, R., Simoneau, M., Caron, A., Chahal, P., Chen, W., Ansorge, S., Li, X., Henry, O., & Kamen, A. (2016). Hemagglutinin and neuraminidase containing virus-like particles produced in HEK-293 suspension culture: An effective influenza vaccine candidate. Vaccine, 34(29), 3371-3380. Lien externe

Vergé, X., Maxime, D., Desjardins, R. L., & VanderZaag, A. C. (2016). Allocation factors and issues in agricultural carbon footprint: a case study of the Canadian pork industry. Journal of Cleaner Production, 113, 587-595. Lien externe

Vidal, D., & Bertrand, F. (octobre 2016). Lattice Boltzmann Models for Industrial Porous Media Flows [Communication écrite]. Mathias 2016, Paris, France. Non disponible

Vidal, D., & Bertrand, F. (août 2016). Revisiting the Classical Porous Media Theory Using Lattice Boltzmann Simulations [Communication écrite]. Enabling Process Innovation by Computation Workshop (EPIC 2016), Banff, Alberta. Lien externe

Vidal, D., Tucny, J.-M., Drolet, F., & Bertrand, F. (mai 2016). Revisiting Davies' Correlation for Porous Media Made of Polydisperse Fibers Based on Lattice Boltzmann Simulations [Communication écrite]. 8th International Conference on Porous Media, Cincinnati, Ohio. Non disponible

Virgilio, N. (janvier 2016). Soft matter interfaces: from the kitchen to the lab and back again [Présentation]. Dans Carreau-EUL Seminar, Montréal, Québec. Non disponible

Virgilio, N., Sarazin, P., & Esquirol, A.-L. (2016). Porous gels and methods for their preparation. (Demande de brevet no US20160200891). Lien externe

W

Walzberg, J., Dandres, T., Cheriet, M., & Samson, R. (octobre 2015). How to Address Behavioral Issues in the Environmental Assessment of Complex Systems: Case of a Smart Building [Communication écrite]. 1st International Conference on Social Innovation and Community Aspects of Smart Cities (SmartCityCom), Bratislava, SLOVAKIA. Non disponible

Wang, C., Natale, G., Virgilio, N., & Heuzey, M.-C. (2016). Synergistic gelation of gelatin B with xanthan gum. Food Hydrocolloids, 60, 374-383. Lien externe

Wang, C., Virgilio, N., Wood-Adams, P., & Heuzey, M.-C. (août 2016). Effect of xanthan gum viscosity on the gelling properties of gelatin B/xanthan gum mixtures [Communication écrite]. International Congress on Rheology (ICR 2016), Kyoto, Japan. Non disponible

Wang, C.-S., Virgilio, N., Wood-Adams, P., & Heuzey, M.-C. (octobre 2016). Synergistic gelling properties of mixed gelatin B and xanthan gum solutions: effects of gelatin concentration and bloom index [Présentation]. Dans 66th Canadian Chemical Engineering Conference, Québec, Québec. Non disponible

Wang, J. (2016). Controlling Morphology and Resistivity in Multiphase Polymer Blends with Poly(ether-b-amide) [Thèse de doctorat, École Polytechnique de Montréal]. Disponible

Wang, J., Jin, L., Chen, C., Rao, W., Wang, C., & Liu, X. (2016). Critical evaluation and thermodynamic optimization of the U-Pb and U-Sb binary systems. Journal of Nuclear Materials, 480, 216-222. Lien externe

Wang, J., Reyna-Valencia, A., & Favis, B. D. (2016). Assembling Conductive PEBA Copolymer at the Continuous Interface in Ternary Polymer Systems: Morphology and Resistivity. Macromolecules, 49(14), 5115-5125. Lien externe

Wang, J., Reyna-Valencia, A., Chaigneau, R., & Favis, B. D. (2016). Controlling the Hierarchical Structuring of Conductive PEBA in Ternary and Quaternary Blends. Industrial & Engineering Chemistry Research, 55(50), 12848-12859. Lien externe

Wang, J., Wang, K., Ma, C., & Xie, L. (2016). Critical evaluation and thermodynamic optimization of the (U plus Bi), (U plus Si) and (U plus Sn) binary systems. Journal of Chemical Thermodynamics, 92, 158-167. Lien externe

Wang, K., Robelin, C., Wu, Z., Li, C., Xie, L., & Chartrand, P. (2016). Thermodynamic description of the AgCl-CoCl₂-InCl₃-NaCl system. Journal of Alloys and Compounds, 663, 885-898. Lien externe

Wang, X. (2016). Emulsifying Properties of Chitosan and Chitosan/Gelatin Complexes [Thèse de doctorat, École Polytechnique de Montréal]. Disponible

Wang, X. Y., & Heuzey, M.-C. (2016). Chitosan-Based Conventional and Pickering Emulsions with Long-Term Stability. Langmuir, 32(4), 929-936. Lien externe

Wang, X.-Y., & Heuzey, M.-C. (2016). Pickering emulsion gels based on insoluble chitosan/gelatin electrostatic complexes. RSC Advances, 6(92), 89776-89784. Lien externe

Wang, X.-Y., Wang, C.-S., & Heuzey, M.-C. (2016). Complexation of chitosan and gelatin: From soluble complexes to colloidal gel. International Journal of Polymeric Materials and Polymeric Biomaterials, 65(2), 96-104. Lien externe

Y

Ye, L., Wang, C., Wang, S., Zhou, S., & Liu, X. (2016). Thermal and rheological properties of brown flour from Indica rice. Journal of Cereal Science, 70, 270-274. Lien externe

Yi, Z. (2016). New Materials and Processing Routes for Organic Electrochemical Transistors [Thèse de doctorat, École Polytechnique de Montréal]. Disponible

Yuan, Y., Cheah, C., Arzumand, A., Luo, J., Krishnan, G. R., & Sarkar, D. (2016). Engineering of endothelial cell response on biphasic polyurethane matrix. Technology, 4(3), 139-151. Lien externe

Z

Zhang, S., Hubis, E., Girard, C., Kumar, P., DeFranco, J., & Cicoira, F. (2016). Water stability and orthogonal patterning of flexible micro-electrochemical transistors on plastic. Journal of Materials Chemistry C, 4(7), 1382-1385. Lien externe

Zhao, X., Condruz, S., Chen, J., & Jolicoeur, M. (2016). A quantitative metabolomics study of high sodium response in Clostridium acetobutylicum ATCC 824 acetone-butanol-ethanol (ABE) fermentation. Scientific Reports, 6(1), 1-13. Disponible

Zhu, L., Garon, M., Quenneville, E., Buschmann, M. D., & Savard, P. (2016). Decrease of the electrical potentials measured on the surface of the knee and produced by cartilage compression during successive loading cycles. Journal of Biomechanics, 49(14), 3587-3591. Lien externe

Zhu, Z., Gharghouri, M. A., & Pelton, A. (2016). Thermodynamic modelling and in-situ neutron diffraction investigation of the (Nd + Mg + Zn) system. Journal of Chemical Thermodynamics, 94, 43-51. Lien externe

Zhu, Z., Gharghouri, M. A., Medraj, M., Lee, S. Y., & Pelton, A. (2016). Thermodynamic modelling and in-situ neutron diffraction investigation of the (Ce+Mg+Zn) system. Journal of Chemical Thermodynamics, 93, 242-254. Lien externe

Zolali, A. M., & Favis, B. D. (2016). Partial and complete wetting in ultra-low interfacial tension multiphase blends with polylactide. Journal of Physical Chemistry B, 120(49), 12708-12719. Lien externe

Zolali, M. A. (2016). Controlled Wetting in Multiphase Polymer Blends with Polylactide: Morphology and Performance [Thèse de doctorat, École Polytechnique de Montréal]. Disponible