<  Back to the Polytechnique Montréal portal

Items where Division is "Department of Mechanical Engineering"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors | Document subtype | No Grouping
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | R | S | T | V | W | X | Y | Z
Number of items: 279.


Abderrefai, Y., Farahani, R. D., & Therriault, D. (2021). Objective 1: Design and formulate different HTRT materials (PEI or PEEK) reinforced with carbon fibers. (Technical Report). Unavailable

Absi, C., Alsinani, N. A., & Laberge Lebel, L. (2021, May). Fastening aerospace structures with carbon fiber/poly ether ether ketone composite rivets [Presentation]. In SAMPE 2021. Unavailable

Ahmadfard, M., & Bernier, M. (2021). Sizing Vertical Ground Heat Exchangers. ASHRAE Journal, 63, 24-36. Unavailable

Ahmadfard, M., Bernier, M., Paleshi, A., & Allen, G. (2021, June). Modeling and simulation of a dual temperature BTES system [Paper]. Biennial Conference of IBPSA-Canada (eSIM 2021) (8 pages). Unavailable

Aissiou, M., Curnier, D., Caru, M., Hafyane, T., Leleu, L., Krajinovic, M., Laverdière, C., Sinnett, D., Andelfinger, G., Cheriet, F., & Périé-Curnier, D. (2021). Detection of doxorubicin-induced cardiotoxicity using myocardial T1 and T2 relaxation times in childhood acute lymphoblastic leukemia survivors. International Journal of Cardiovascular Imaging, 10 pages. External link

Alsinani, N., Ghaedsharaf, M., & Laberge Lebel, L. (2021). Effect of cooling temperature on deconsolidation and pulling forces in a thermoplastic pultrusion process. Composites Part B: Engineering, 219, 15 pages. External link

Assaday Caillot de Montureux, T. (2021). Modélisation numérique de l'interaction entre un écoulement diphasique et un profil de turbine hydroélectrique aéré [Master's thesis, Polytechnique Montréal]. Available

Assi, P., Achiche, S., & Laberge Lebel, L. (2021). 3D printing process for textile composites. CIRP Journal of Manufacturing Science and Technology, 32, 507-516. External link

Awad, M. (2021). An Immersed Boundary Method Approach Using Hierarchical and Overlapping Grids for Unsteady Aerodynamics [Ph.D. thesis, Polytechnique Montréal]. Available


Bahrami-Torabi, H., Kerboua, Y., & Lakis, A. A. (2021). Finite element model to investigate the dynamic instability of rectangular plates subjected to supersonic airflow. Journal of Fluids and Structures, 103, 13 pages. External link

Barron, O. (2021). Apprentissage profond pour fins de commande d'une prothèse myoélectrique transhumérale [Ph.D. thesis, Polytechnique Montréal]. Available

Barrouillet, B. (2021). Optimized Calibrations of RANS-based k-w-y-Reot Transitional Turbulence Models for Aircraft Applications [Ph.D. thesis, Polytechnique Montréal]. Available

Barrouillet, B., Laurendeau, É., & Yang, H. (2021, January). On the calibration of the transitional k-ω-γ-Reθt turbulence model [Paper]. 2021 AIAA Scitech Forum, En ligne / Online (12 pages). External link

Barrouillet, B., Laurendeau, É., & Yang, H. (2021, August). Optimized cross flow transition model for Reynolds Averaged Navier Stokes applications [Paper]. AIAA Aviation 2021 Forum. External link

Barzegar Bafrouei, B. (2021). Assessing the Energy Flexibility Potential of Residential Photovoltaic Panel with Battery Systems in Cold Climate [Ph.D. thesis, Polytechnique Montréal]. Available

Bawin, A., Henrotte, F., & Remacle, J.‐.F. (2021). Automatic feature-preserving size field for three-dimensional mesh generation. International Journal for Numerical Methods in Engineering, 122(18), 4825-4847. External link

Beaini, D., Achiche, S., Duperre, A., & Raison, M. (2021). Deep green function convolution for improving saliency in convolutional neural networks. Visual Computer, 37(2), 227-244. External link

Beaulieu, C., Vidal, D., Bertrand, F., & Chaouki, J. (2021). Impact of granular segregation on heat transfer in horizontal drums. Chemical Engineering Journal, 409, 17 pages. External link

Beaulieu, C., Vidal, D., Niyonkuru, C., Wachs, A., Chaouki, J., & Bertrand, F. (2021). Effect of particle angularity on flow regime transitions and segregation of bidisperse blends in a rotating drum. Computational Particle Mechanics, 21 pages. External link

Bédard, É., Benoît, M.-Ê., Bourdin, T., Charron, D., Delisle, G., Daraîche, S., Gravel, S., Robert, É., Constant, P., Déziel, E., Quach, C., & Prévost, M. (2021, April). Implementation of a low-cost method to reduce bacterial load in patient room sink drains [Paper]. SHEA Spring 2021. External link

Beglarzadeh, B., Mayer, J. R. R., & Archenti, A. (2021). Modelling and indirect measurement of machine tool equivalent joint compliances. CIRP Journal of Manufacturing Science and Technology, 35, 882-895. External link

Belot, I., Sun, Y., Vidal, D., Votsmeier, M., Causse, P., Trochu, F., & Bertrand, F. (2021). A 3D additive manufacturing approach for the validation of a numerical wall-scale model of catalytic particulate filters. Chemical Engineering Journal, 405, 18 pages. External link

Belot, I., Vidal, D., Greiner, R., Votsmeier, M., Hayes, R. E., & Bertrand, F. (2021). Impact of washcoat distribution on the catalytic performance of gasoline particulate filters as predicted by lattice Boltzmann simulations. Chemical Engineering Journal, 406, 127040 (18 pages). External link

Ben Ftima, M., & Yildiz, E. (2021, May). Revisiting the slot-cutting repair techniquefor facilities affected by AAR using advanced numerical simulations [Paper]. 16th International Conference on Alkali Aggregate Reaction in Concrete (ICAAR 2020-2022), Lisboa, Portugal. Unavailable

Ben Youssef, Y. (2021). Comportement dynamique nonlinéaire des structures cylindriques fermées et isotropes, soumises à un écoulement supersonique [Ph.D. thesis, Polytechnique Montréal]. Available

Ben-Youssef, Y., Kerboua, Y., & Lakis, A. A. (2021). An Analytical Approach for the Nonlinear Free Vibration Analysis of Thin-Walled Circular Cylindrical Shells. International Journal of Structural Stability and Dynamics, 21(12). External link

Ben-Youssef, Y., Kerboua, Y., & Lakis, A. A. (2021). Numerical modeling of initial stress stiffening effect on the dynamic behavior of axisymmetric shells. Journal of Pressure Vessel Technology, Transactions of the ASME, 143(5), 20 pages. External link

Bernard, G., Achiche, S., Girard, S., & Mayer, J. R. R. (2021). Condition monitoring of manufacturing processes under low sampling rate. Journal of Manufacturing and Materials Processing, 5(1), 26 (14 pages). Available

Berthet, L. (2021). Mode Split Prediction for Rotating Disks with Flexible Stator Coupling [Master's thesis, Polytechnique Montréal]. Available

Bertrand, E., Caru, M., Lemay, V., Andelfinger, G., Laverdiere, C., Krajinovic, M., Sinnett, D., Jacquemet, V., & Curnier, D. (2021, October). Ventricular Repolarization during Cardiopulmonary Exercise Test in Childhood Acute Lymphoblastic Leukemia Survivors [Abstract]. 53rd Congress of the international Society of Paediatric Oncology (SIOP 2021). Published in Pediatric Blood & Cancer, 68(S5). External link

Bertrand, E., Caru, M., Morel, S., Lemay, V., Bergeron Parenteau, A., Andelfinger, G., Laverdiere, C., Krajinovic, M., Sinnett, D., Marcil, V., & Curnier, D. (2021). Fat And Carbohydrate Oxidation During Cardiopulmonary Exercise Test In Childhood Acute Lymphoblastic Leukemia Survivors. Medicine and Science in Sports and Exercise, 53(8S), 1436 (1 page). External link

Birglen, L. (2021). Mécatronique : cours avec exercices corrigés. Unavailable

Blanchet, L., Achiche, S., Docquier, Q., Fisette, P., & Raison, M. (2021). A procedure to optimize the geometric and dynamic designs of assistive upper limb exoskeletons. Multibody System Dynamics, 51(2), 221-245. External link

Bonarens, M., Greiner, R., Votsmeier, M., & Vidal, D. (2021). Towards a polydisperse packed bed filtration model as a surrogate model for particulate filters. Journal of Aerosol Science, 160, 105900. Restricted access

Bonin, R. (2021). Caractérisation des effets des stratégies d'acquisition de nuages de points sur l'exactitude et la précision de mesures de géométries prismatiques [Master's thesis, Polytechnique Montréal]. Available

Bonin, R., Khameneifar, F., & Mayer, J. R. R. (2021). Evaluation of the Metrological Performance of a Handheld 3D Laser Scanner Using a Pseudo-3D Ball-Lattice Artifact. Sensors, 21(6), 2137 (18 pages). Available

Bonnichon, M. (2021). Méthodes de capture de chocs instationnaires et leur implémentation pour la méthode des éléments finis [Master's thesis, Polytechnique Montréal]. Available

Boudina, M., Gosselin, F., & Étienne, S. (2021, January). Soft corals vibrating under flow to improve food capture? [Abstract]. Annual Meeting of the Society-for-Integrative-and-Comparative-Biology (SICB 2021). Published in Integrative and Comparative Biology, 61. External link

Boudina, M., Gosselin, F., & Étienne, S. (2021). Vortex-induced vibrations: A soft coral feeding strategy? Journal of Fluid Mechanics, 916, A50 (26 pages). External link

Boulvert, J., Costa-Baptista, J., Fotsing, E. R., Cavalieri, T., Romera-Garcia, V., Gabard, G., Ross, A., Mardjono, J., & Croby, J.-P. (2021, March). 3D printed folded porous material for sub-wavelength absorption of sound [Paper]. 6th Symposium on the Accoustics of Poro-Elastic Materials (SAPEM 2020) (2 pages). External link

Boulvert, J., Té, H., Romero-García, V., Gabard, G., Fotsing, E. R., Ross, A., Mardjono, J., & Groby, J. P. (2021, September). Asymmetric Metaporous Treatment: Optimization for Perfect Sound Absorption, 3D Printing, and Characterization with Air Flow [Paper]. 15th International Congress on Artificial Materials for Novel Wave Phenomena (METAMATERIALS 2021), New York, N.Y.. External link

Brahimi, T., & Paraschivoiu, I. (2021). Aerodynamic Analysis and Performance Prediction of VAWT and HAWT Using CARDAAV and Qblade Computer Codes. In Wang, L.-S., Cao, W., & Hu, S.-B. (eds.), Entropy and Exergy in Renewable Energy (326-456). Available

Brahme, A., Inal, K., Mishra, R. K., Farzadfar, A., & Martin, É. (2021, June). The Influence of Recrystallization on the Temperature Dependence of Twinning in Magnesium Alloys [Paper]. 12th International Conference on Magnesium Alloys and their Applications (MAGNESIUM 2021). External link

Breumier, S. (2021). Methodology for Shot-Peening Induced Intragranular Residual Stress Prediction [Ph.D. thesis, Polytechnique Montréal]. Available

Breumier, S., Adamski, F., Badreddine, J., Lévesque, M., & Kermouche, G. (2021). Microstructural and mechanical characterization of a shot peening induced rolled edge on direct aged Inconel 718 alloy. Materials Science and Engineering A, 816, 10 pages. External link

Breumier, S., Trudeau-Lalonde, F., Lafrance, T., Robert, É., Villani, A., Kermouche, G., & Lévesque, M. (2021). Controlled single and repeated impact testing for material plastic behaviour characterisation under high strain rates. Strain, 57(6), 28 pages. External link

Brochu Dufour, O. (2021). Visual Odometry System for Drones Assisted by a Deep Neural Network [Master's thesis, Polytechnique Montréal]. Available

Brunette, J., & Bazergui, A. (2021). Spinal Biomechanics Concepts of Pediatric Scoliosis and Trunk Shift Applied to Daily Tasks and Sports. Journal of Musculoskeletal Disorders and Treatment, 7(4), 13 pages. Available

Brzeski, D. (2021). Development of Thermosetting Composite Materials for Producing Multifunctional Coatings by Direct Ink Writing [Master's thesis, Polytechnique Montréal]. Available

Brzeski, D., Hia, I. L., Chauvette, J.-F., Farahani, R. D., Piccirelli, N., Ross, A., & Therriault, D. (2021). Design of thermoset composites for high-speed additive manufacturing of lightweight sound absorbing micro-scaffolds. Additive Manufacturing, 47, 13 pages. External link

Burgarella, B., Assi, P., & Laberge Lebel, L. (2021). Multi-scale finite elements analysis of braids and bundles of filaments using embeded elements. Finite Elements in Analysis and Design, 197, 103631 (8 pages). External link

Burlet-Vienney, D., Galy, B., & Bertrand, K. C. (2021). Analysis of vehicle stability when using two-post above-ground automotive lifts: Distribution of forces in arms. Safety Science, 134, 105042 (14 pages). External link

Buyck, M., Levy, A., Tabone, L., Aubin, C.-É., Jouvet, P., & Baudin, F. (2021). Pediatric barrier enclosure for nasopharyngeal suctioning during Covid-19 pandemic: A simulation based-study. American Journal of Emergency Medicine, 45, 608-610. External link


Calloo, A. A., & Hébert, A. Comparing the Discontinuous Galerkin and High-order Diamond Differencing Methods for the Transport Equation on a Lozenge-based Hexagonal Geometry [Paper]. International Conference on Physics of Reactors: Transition to a Scalable Nuclear Future (PHYSOR 2020), Cambridge, UK (8 pages). Published in EPJ Web of Conferences, 247. External link

Capo, M. (2021). Using Topology Optimization Techniques for Preliminary Design of Stiffened Panels [Master's thesis, Polytechnique Montréal]. Available

Caron, F., & Leclaire, S. (2021, December). A modelling cycle for the training in simulation-based engineering science [Abstract]. Workshop on Controlling Error and Efficiency of Numerical Models: Methods, benchmarks, and case studies, Toronto, Ont.. External link

Cavalieri, T., Boulvert, J., Romero-Garcia, V., Gabard, G., Escouflaire, M., Regnard, J., & Groby, J.-P. (2021). Rapid additive manufacturing of optimized anisotropic metaporous surfaces for broadband absorption. Journal of Applied Physics, 129(11), 14 pages. External link

Chambon, R., Ding, S., & Hébert, A. An Improved Double Heterogeneity Model for Pebble-bed Reactors in Dragon-5 [Paper]. International Conference on Physics of Reactors: Transition to a Scalable Nuclear Future (PHYSOR 2020), Cambridge, UK (8 pages). Published in EPJ Web of Conferences, 247. External link

Charpentier, T. (2021). Écoulement d'un jet impactant un faisceau de cylindres : vélocimétrie par image de particules et simulations numériques [Master's thesis, Polytechnique Montréal]. Available

Chauvette, J.-F., Brzeski, D., Hia, I. L., Farahani, R. D., Piccirelli, N., & Therriault, D. (2021). High-speed multinozzle additive manufacturing and extrusion modeling of large-scale microscaffold networks. Additive Manufacturing, 47, 11 pages. External link

Chauvette, J.-F., Hia, I. L., Farahani, R. D., & Therriault, D. (2021). Objective 4: Develop a printing process for direct deposition of acoustic abradable materials on composite structures featuring flat and curved geometries. (Technical Report). Unavailable

Chouchane, K. (2021). Impact of Vibratory Peening on The Surface Integrity of Cemented Steel E16NCD13 [Master's thesis, Polytechnique Montréal]. Available

Cimmino, M. (2021). An approximation of the finite line source solution to model thermal interactions between geothermal boreholes. International Communications in Heat and Mass Transfer, 127, 5 pages. Available

Colaïtis, Y. (2021). Stratégie numérique pour l'analyse qualitative des interactions aube/carter [Ph.D. thesis, Polytechnique Montréal]. Available

Colaïtis, Y., & Batailly, A. (2021). Development of a Harmonic Balance Method-Based Numerical Strategy for Blade-Tip/Casing Interactions: Application to NASA Rotor 37. Journal of Engineering for Gas Turbines and Power, 143(11), 31 pages. External link

Colaitis, Y., & Batailly, A. (2021). The harmonic balance method with arc-length continuation in blade-tip/casing contact problems. Journal of Sound and Vibration, 502, 27 pages. External link

Cossin, M., Ross, A., & Prince, F. (2021). Effect of jump heights, landing techniques, and participants on vertical ground reaction force and loading rate during landing on three different Korean teeterboards. Proceedings of the Institution of Mechanical Engineers Part P-Journal of Sports Engineering and Technology, 1754337121 (9 pages). External link

Costa Baptista, J., Roland-Fotsing, E., Mardjano, J., Therriault, D., & Ross, A. (2021, August). Multilayer treatment for subwavelength and broad absorption [Paper]. 50th International Congress and Exposition on Noise Control Engineering (INTER-NOISE 2021), Washington, DC, USA. External link

Coulombe, C. (2021). Support à la conception intégrée de manipulateurs aériens [Ph.D. thesis, Polytechnique Montréal]. Available

Coulombe, C., Saussié, D., & Achiche, S. (2021). Modeling and gain-scheduled control of an aerial manipulator. International Journal of Dynamics and Control, 10(1), 217-229. External link


Damene, D., Alloui, Z., Alloui, I., & Vasseur, P. (2021). Variable Permeability Effects on Natural Convection in a Vertical Porous Layer with Uniform Heat Flux from the Side. Transport in Porous Media, 137, 287-306. External link

Darwish, A., Di Labbio, G., Saleh, W., & Kadem, L. (2021). Proper Orthogonal Decomposition Analysis of the Flow Downstream of a Dysfunctional Bileaflet Mechanical Aortic Valve. Cardiovascular Engineering and Technology, 12(3), 286-299. External link

Darwish, A., Norouzi, S., Di Labbio, G., & Kadem, L. (2021). Extracting Lagrangian coherent structures in cardiovascular flows using Lagrangian descriptors. Physics of Fluids, 33(11), 7 pages. External link

Darwish, S., Hadji, A., Pham, H. P., Mureithi, N. W., & Ha, C. H. (2021, July). Flow-induced vibration behaviour of a rotated square tube array subjected to cross-flow [Paper]. ASME 2021 Pressure Vessels and Piping Conference (PVP 2021) (9 pages). External link

de Lima, L. A. P., de Lucas, R. D., Raison, M., & Achiche, S. (2021). Erratum: Is the understanding of VO₂ kinetics biased by the first-order multi-exponential model? Pflügers Archiv-European Journal of Physiology, 473(1), 131-131. External link

Dega, C., Boukhili, R., Leger, K., Laviolette, J.-P., & Jadidinia, A. (2021, October). Recycling of carbon fiber reinforced plastics by microwave pyrolysis [Paper]. 8th Annual Composites and Advanced Materials Expo (CAMX 2021), Dallas, TX, USA. Unavailable

Delhez, E., Nyssen, F., Golinval, J. C., & Batailly, A. (2021). Reduced order modeling of blades with geometric nonlinearities and contact interactions. Journal of Sound and Vibration, 500, 27 pages. External link

Delhez, E., Nyssen, F., Golinval, J.-C., & Batailly, A. (2021). Assessment of Geometric Nonlinearities Influence on NASA Rotor 37 Response to Blade Tip/Casing Rubbing Events. Journal of Engineering for Gas Turbines and Power-Transactions of the Asme, 143(11), 8 pages. External link

Dewart, F. (2021). Étude de la cinétique de montée capillaire dans une matrice en carbure de silicium caractérisée par des défauts contrôlés [Master's thesis, Polytechnique Montréal]. Available

Dhar, L., Anne, F., Recchia, G., Étienne, S., Béguin, C., Scott, D., & Bornard, L. (2021). Bubble characteristics from injected air sheet through slots in a water cross-flow. International Journal of Multiphase Flow, 142, 12 pages. External link

Diouf-Lewis, A., Abderrafai, Y., Iervolino, F., Pierre, J., Farahani, R. D., Piccirelli, N., & Therriault, D. (2021, September). Fabrication and characterization of fiber-reinforced PEEK thermoplastic 3D printing filaments [Paper]. 36th International Conference of the Polymer Processing Society (PPS36), Montreal, Canada. Unavailable

Distefano, D., Scarone, P., Isalberti, M., La Barbera, L., Villa, T., Bonaldi, G., Hirsch, J. A., & Cianfoni, A. (2021). The "armed concrete" approach: stent-screw-assisted internal fixation (SAIF) reconstructs and internally fixates the most severe osteoporotic vertebral fractures. Journal of NeuroInterventional Surgery, 13(1), 63-68. External link

Dreau, J., Magnain, B., Nyssen, F., & Batailly, A. (2021). Polynomial chaos expansion for permutation and cyclic permutation invariant systems: Application to mistuned bladed disks. Journal of Sound and Vibration, 503, 24 pages. External link

Dubé-Cyr, R., Aubin, C.-É., Villemure, I., & Arnoux, P.-J. (2021). Biomechanical analysis of the number of implants for the immediate sacroiliac joint fixation. Spine Deformity, 9(5), 1267-1273. External link

Dube-Cyr, R., Villemure, I., Arnoux, P. J., Rawlinson, J., & Aubin, C.-É. (2021). Instrumentation of the sacroiliac joint with cylindrical threaded implants: A detailed finite element study of patient characteristics affecting fixation performance. Journal of Orthopaedic Research, 39(12), 2693-2702. External link

Duong, T. L. (2021). Characterizing the Sacrificial Coating on Tools During Turning of TiMMCs [Master's thesis, Polytechnique Montréal]. Available


Ebrahimkhani, M., Arjmand, N., & Shirazi-Adl, A. (2021). Biomechanical effects of lumbar fusion surgery on adjacent segments using musculoskeletal models of the intact, degenerated and fused spine. Scientific Reports, 11(1), 12 pages. Available

Elzein, B., Jobin, O., & Robert, É. (2021). Reducing the Ignition Delay of Hypergolic Hybrid Rocket Fuels. Journal of Propulsion and Power, 37(1), 77-85. External link

Engler, K., Vicente, S., Ma, Y., Hijal, T., Cox, J., Ahmed, S., Klein, M., Achiche, S., Pant Pai, N., de Pokomandy, A., Lacombe, K., & Lebouché, B. (2021). Implementation of an electronic patient-reported measure of barriers to antiretroviral therapy adherence with the Opal patient portal: Protocol for a mixed method type 3 hybrid pilot study at a large Montreal HIV clinic. PLOS ONE, 16(12), 19 pages. External link

Esmaeili Marzdashti, S. (2021). Compensation Tables for the Correction of Geometric and Volumetric Errors in Five-Axis Machine Tools from Indirect Calibration Data [Ph.D. thesis, Polytechnique Montréal]. Available

Esmaeili, S. M., & Mayer, J. R. R. (2021). CNC table based compensation of inter-axis and linear axis scale gain errors for a five-axis machine tool from symbolic variational kinematics. CIRP Annals, 70(1), 439-442. External link

Esmaeili, S., Mayer, J. R. R., Sanders, M., Dahlem, P., & Xing, K. (2021). Five-axis machine tool volumetric and geometric error reduction by indirect geometric calibration and lookup tables. Journal of Manufacturing Science and Engineering, 143(7), 28 pages. External link

Etienne, F. (2021). Simulation de l'impact de vagues induites par le ballottement sur les parois des cuves de transport de gaz naturel liquéfié maritime [Master's thesis, Polytechnique Montréal]. Available


Fan, L., Vena, P., Savard, B., Xuan, G., & Fond, B. (2021). High-resolution velocimetry technique based on the decaying streaks of phosphor particles. Optics Letters, 46(3), 641-644. External link

Fan, L., Vena, P., Savard, B., Xuan, G., & Fond, B. (2021, August). A novel streak velocimetry technique based on 2D fits of decaying phospor particle images [Paper]. 14th International Symposium on Particle Image Velocimetry (ISPIV 2021) (2 pages). External link

Fan, X., Yahia, L., & Sacher, E. (2021). Antimicrobial properties of the Ag, Cu Nanoparticle System. Biology, 10(2), 37 pages. Available

Farahani, R. D., & Therriault, D. (2021). Advanced manufacturing of composites for structural and acoustic applications. (Technical Report). Unavailable

Farahani, R. D., Brzeski, D., Hia, I. L., Diouf-Lewis, A., Piccirelli, N., & Therriault, D. (2021, September). 3D printing of abradable polymer composite materials: Materials formulations and characterization [Paper]. 36th International Conference of the Polymer Processing Society (PPS36), Montreal, Canada. Unavailable

Farahani, R. D., Lévesque, M., & Therriault, D. (2021). Advanced manufacturing of composites for structural and acoustic applications. (Technical Report). Unavailable

Farzanehkaloorazi, M.H., Bonev, I. A., & Birglen, L. (2021). Simultaneous task placement and sequence optimization in an inspection robotic cell. Robotica, 39(12), 2110-2130. External link

Fernandez Escudero, C. (2021). Passive Aeroelastic Control of Aircraft Wings Via Nonlinear Oscillators [Ph.D. thesis, Polytechnique Montréal]. Available

Figueroa, I. C., Cimmino, M., Drgoňa, J., & Helsen, L. (2021). Fluid temperature predictions of geothermal borefields using load estimations via state observers. Journal of Building Performance Simulation, 14(1). Available

Fisette, P., Hinnekens, S., Moreau, E., & Raison, M. (2021, December). Demystifying the Mechanical and Numerical Concepts Underlying Multibody System Dynamics: Development of an International MOOC [Paper]. ECCOMAS Multibody Dynamics Conference 2021. Unavailable

Frohlicher, K., Salino, V., & Hébert, A. (2021). Investigating fission distribution behavior under various homogenization techniques for asymmetrical fuel assemblies and different reflector equivalence methods. Annals of Nuclear Energy, 157, 12 pages. External link


Gad-El-Hak, I., Mureithi, N. W., Karazis, K., & Williams, G. (2021, July). Experimental investigation of jet cross-flow induced vibration of a rod bundle [Paper]. ASME 2021 Pressure Vessels and Piping Conference (PVP 2021) (10 pages). External link

Gamache, J.-F. (2021). On Topology Optimization in the Generative Design Framework : use on Aircraft Structure design [Ph.D. thesis, Polytechnique Montréal]. Available

Gamache, J.-F., Vadean, A., Dodane, N., & Achiche, S. (2021). On generating stiffening layouts with density-based topology optimization considering buckling. CEAS Aeronautical Journal, 12(4), 863-877. External link

Garcia Perez, J., Leclaire, S., Ammar, S., Trépanier, J.-Y., Reggio, M., & Benmeddour, A. (2021). Investigations of water droplet impact and freezing on a cold substrate with the Lattice Boltzmann method. International Journal of Thermofluids, 12, 10 pages. External link

Gaudet, G., Raison, M., & Achiche, S. (2021). Current trends and challenges in pediatric access to sensorless and sensor-based upper limb exoskeletons. Sensors, 21(10), 3561 (17 pages). Available

Gesta, A., Mohebbi, A., & Achiche, S. (2921, October). Low-cost 1 degree of freedom ankle exoskeleton for children with cerebral palsy [Abstract]. Tech Day. Unavailable

Ghaedsharaf, M. (2021). Multiscale Numerical Simulation of Biaxial Braids with Discrete Fibers for Manufacturing Thermoplastic Composite Rods Using Braid-trusion [Ph.D. thesis, Polytechnique Montréal]. Available

Ghaedsharaf, M., Brunel, J.-E., & Laberge Lebel, L. (2021). Fiber-level numerical simulation of biaxial braids for mesoscopic morphology prediction validated by X-ray computed tomography scan. Composites Part B: Engineering, 218, 11 pages. External link

Ghaedsharaf, M., Brunel, J.-E., & Laberge Lebel, L. (2021). Multiscale numerical simulation of the forming process of biaxial braids during thermoplastic braid-trusion: Predicting 3D and internal geometry and fiber orientation distribution. Composites Part A: Applied Science and Manufacturing, 150, 15 pages. External link

Ghezelbash, F., Eskandari, A. H., Shirazi-Adl, A., Kazempour, M., TavaKoli, J., Baghani, M., & Costi, J. J. (2021). Modeling of human intervertebral disc annulus fibrosus with complex multi-fiber networks. Acta Biomaterialia, 123, 208-221. External link

Ghezelbash, F., Shahvarpour, A., Larivière, C., & Shirazi-Adl, A. (2021). Evaluating stability of human spine in static tasks: a combined in vivo-computational study. Computer Methods in Biomechanics and Biomedical Engineering, 25(10), 1156-1168. External link

Ghorbani, H., & Khameneifar, F. (2021). Accurate registration of point clouds of damaged aero-engine blades. Journal of Manufacturing Science and Engineering, 143(3), 10 pages. External link

Ghorbani, H., & Khameneifar, F. (2021). Airfoil profile reconstruction from unorganized noisy point cloud data. Journal of Computational Design and Engineering, 8(2), 740-755. External link

Girard, M., Vidal, D., Bertrand, F., Tavares, J. R., & Heuzey, M.-C. (2021). Evidence-based guidelines for the ultrasonic dispersion of cellulose nanocrystals. Ultrasonics Sonochemistry, 71, 105378 (11 pages). External link

Gondran, M., Abdin, Y., Gendreau, Y., Khameneifar, F., & Laberge Lebel, L. (2021). Automated braiding of non-axisymmetric structures using an iterative inverse solution with angle control. Composites Part A: Applied Science and Manufacturing, 143, 13 pages. External link

Goupil, V. (2021). Analysis and Modelling of Li-Ion Cells Degassing and Combustion under Thermal Runaway [Master's thesis, Polytechnique Montréal]. Available

Granier, F. (2021). Fabrication additive multi-matériaux et procédés de dispositifs piézoélectriques pour la création de structures intelligentes [Master's thesis, Polytechnique Montréal]. Available

Grofti, Z. (2021). Caractérisation et simulation du procédé d'infusion indirecte de résine pour fabriquer des pièces composites de grande dimension [Master's thesis, Polytechnique Montréal]. Available

Guy, A., Labelle, H., Barchi, S., & Aubin, C.-É. (2021, January). The impact of immediate in-brace 3D corrections on curve evolution after two years of treatment: Preliminary results [Paper]. International Research Society of Spinal Deformities. External link

Guy, A., Labelle, H., Barchi, S., Audet-Duchesne, E., Cobetto, N., Parent, S., Raison, M., & Aubin, C.-É. (2021). Braces Designed Using CAD/CAM Combined or Not With Finite Element Modeling Lead to Effective Treatment and Quality of Life After 2 Years : A Randomized Controlled Trial. Spine, 46(1), 9-16. Available


Hamidpour, M., Nami, M. R., Khosravifard, A., & Lévesque, M. (2021). Modeling fracture in viscoelastic materials using a modified incremental meshfree RPIM and DIC technique. European Journal of Mechanics - A/Solids, 92, 52 pages. External link

Hassantabar, N. (2021). Automating Kinematic Resolution of Redundant Planar Manipulators Using Adaptive Neuro-Fuzzy Inference System (ANFIS) Modeling [Master's thesis, Polytechnique Montréal]. Available

Hébert, A. (2021). Application of the augmented block Householder Arnoldi method to the calculation of non-fundamental modes of the diffusion equation. Annals of Nuclear Energy, 151, 8 pages. Available

Hébert, A., Taforeau, J., & Ingremeau, J.-J. (2020, March). Application of the SPH equivalence technique to the cabri full core in non-fundamental mode [Paper]. International Conference on Physics of Reactors: Transition to a Scalable Nuclear Future (PHYSOR 2020), Cambridge, UK (8 pages). Published in EPJ Web of Conferences, 247. External link

Ho, M., Leclaire, S., Reggio, M., & Trépanier, J.-Y. (2021). Stochastic Effects of 2D Random Arrays of Cylinders on Rarefied Gas Permeability Using the Lattice Boltzmann Method. Transport in Porous Media, 136(2), 607-637. External link

Ho, M., Leclaire, S., Trépanier, J.-Y., Reggio, M., & Martin, A. (2021). Permeability calculation of a fibrous thermal insulator using the lattice boltzmann method. Journal of Thermophysics and Heat Transfer, 35(1), 206-209. External link

Ho, M., Seif, M., McDaniel, S., Leclaire, S., Reggio, M., Trépanier, J.-Y., Beck, M., & Martin, A. (2021, January). Fluid behavior in stochastic porous structures [Paper]. 2021 AIAA Scitech Forum, En ligne / Online. External link

Hu, S., Lingua, A., Lengaigne, J., Lévesque, M., Therriault, D., Walch, D., & Tabiai, I. (2021, June). Full Field Measurements Applied To The Experimental Testing Of Structural Parts For The Aerospace Industry [Abstract]. Canadian Society for Mechanical Engineering International Congress, Charlottetown, PE, Canada. External link

Huang, W., Yan, W., Xu, R., Huang, Q., Yang, J., Trochu, F., & Hu, H. (2021). Wrinkling analysis of circular membranes by a Fourier based reduced model. Thin-Walled Structures, 161, 17 pages. External link


Issa, R., Urbanowicz, R., Richebe, P., Blain, J., Benevides, A. F., & Tanoubi, I. (2021). VACuum INtubation (VACcIN) box restricts the exhaled air dispersion generated by simulated cough: description and simulation-based tests of an innovative aerosolization protective prototype. Journal of Clinical Monitoring and Computing, 7 pages. External link


Jadayel, M., & Khameneifar, F. (2021, June). A shape Compensation Approach for Enhancing the Geometric Accuracy of Additive Manufacturing Parts [Abstract]. 4th Holistic Innovation in Additive Manufacturing Conference (HI-AM 2021). Unavailable

Joachim, J., Nyssen, F., & Batailly, A. (2021). Numerical Investigation of a Mistuned Academic Bladed Disk Dynamics With Blade/Casing Contact. Journal of Engineering for Gas Turbines and Power-Transactions of the Asme, 143(4), 041028 (11 pages). External link


Kere, J. (2021). Prédiction d'économies d'énergie de bâtiments après rénovation par la modélisation basée sur les données [Master's thesis, Polytechnique Montréal]. Available

Kidikian, J., Badrieh, C., & Reggio, M. (2021, June). Mathematical model to describe double circular arc and multiple circular ARC compressor blading profiles [Paper]. ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition (GT 2021) (9 pages). External link

Kishawy, H. A., Salem, A., Hegab, H., Hosseini, A., & Balazinski, M. (2021). Micro-textured cutting tools: Phenomenological analysis and design recommendations. CIRP Annals, 70(1), 65-68. External link

Koalaga, S. R. (2021). Utilisation des jauges de déformation et des centrales inertielles pour améliorer l'identification des intentions de mouvement [Master's thesis, Polytechnique Montréal]. Available

Kong, X., Chen, K., Greiner, R., Votsmeier, M., Belot, I., Vidal, D., Bertrand, F., Hayes, R. E., & Olfert, J. S. (2021). Particle Size-Dependent Filtration Efficiency and Pressure Drop of Gasoline Particle Filters with Varying Washcoat Volumes. Emission Control Science and Technology, 7(2), 105-116. External link

Kontogiannis, A., & Laurendeau, É. (2021). Adjoint state of nonlinear vortex-lattice method for aerodynamic design and control. AIAA Journal, 59(4), 1184-1195. External link


La Barbera, L., Larson, A. N., & Aubin, C.-É. (2021). Correction objectives have higher impact than screw pattern and density on the optimal 3D correction of thoracic AIS: a biomechanical study. Spine Deformity, 9(3), 655-664. Available

La Barbera, L., Larson, A. N., & Aubin, C.-É. (2021). How do spine instrumentation parameters influence the 3D correction of thoracic adolescent idiopathic scoliosis? A patient-specific biomechanical study. Clinical Biomechanics, 84, 10 pages. External link

La Barbera, L., Larson, A. N., Rawlinson, J., & Aubin, C.-É. (2021). In silico patient-specific optimization of correction strategies for thoracic adolescent idiopathic scoliosis. Clinical Biomechanics, 81, 105200 (11 pages). External link

Laberge Lebel, L., Hyodo, K., Ohishi, M., & Nakai, A. (2021, December). Pultrusion of Thermoplastic Composites using Partially Consolidated Yarns [Abstract]. 17th Japan International Sampe Symposium and Exhibition, Tokyo, Japan. Unavailable

Laberge Lebel, L., Monnot, P., Oswald, A., & Lapointe, F. (2021). Pultruded beam reinforced with natural fibers, pultrusion system and method therefor. (Patent no. US10913220). External link

Lampron, O., Therriault, D., & Lévesque, M. (2021). An efficient and robust monolithic approach to phase-field quasi-static brittle fracture using a modified Newton method. Computer Methods in Applied Mechanics and Engineering, 386, 24 pages. External link

Langot, J., Pelzmann, T., Chavez-Gomez, P., Boanta, C. S., Karsten, J., Fiedler, B., Lévesque, M., & Robert, É. (2021). Multi-physics modeling of the ignition of polymer matrix composites (PMCs) exposed to fire. Fire Safety Journal, 122, 18 pages. External link

Latko-Durałek, P., Santonja Soto, F., & Therriault, D. (2021, September). A safe green ink for solvent-cast 3D printing [Paper]. 36th International Conference of the Polymer Processing Society (PPS36), Montreal, Canada. Unavailable

Latt, J., Malaspinas, O., Kontaxakis, D., Parmigiani, A., Lagrava, D., Brogi, F., Belgacem, M. B., Thorimbert, Y., Leclaire, S., Li, S., Marson, F., Lemus, J., Kotsalos, C., Conradin, R., Coreixas, C., Petkantchin, R., Raynaud, F., Beny, J., & Chopard, B. (2021). Palabos: Parallel Lattice Boltzmann Solver. Computers & Mathematics With Applications, 81, 334-350. External link

Lavoie, P. (2021). Immersed Boundary Methods for the Modeling of In-Flight Ice Accretion [Ph.D. thesis, Polytechnique Montréal]. Available

Lavoie, P., Radenac, E., Blanchard, G., Laurendeau, É., & Villedieu, P. (2021, August). An Immersed Boundary Methodology for Multi-Step Ice Accretion using a Level-Set [Paper]. AIAA Aviation and Aeronautics Forum and Exposition (AIAA AVIATION Forum 2021). External link

Lavoie, P., Radenac, E., Blanchard, G., Laurendeau, É., & Villedieu, P. (2021). An improved characteristic based volume penalization method for the Euler equations towards icing applications. Computers & Fluids, 222, 104917 (17 pages). External link

Lavoie, P., Radenac, E., Blanchard, G., Laurendeau, É., & Villedieu, P. (2021). Penalization Method for Eulerian Droplet Impingement Simulations Toward Icing Applications. AIAA Journal, 13 pages. External link

Lavoie, P., Radenac, E., Blanchard, G., Laurendeau, É., & Villedieu, P. (2021, January). A penalization method for eulerian droplet impingement simulations towards icing applications [Paper]. AIAA Scitech Forum, En ligne / Online. External link

Law-Kam Cio, Y.-S. (2021). Development of a Flexible Multiobjective Layout Design Tool for the Design of Mechatronic Systems with a Space Miniature Greenhouse Case Study [Ph.D. thesis, Polytechnique Montréal]. Available

Law-Kam Cio, Y.-S., Ma, Y., Vadean, A., Beltrame, G., & Achiche, S. (2021). Evolutionary layout design synthesis of an autonomous greenhouse using product-related dependencies. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 35(1), 49-64. External link

Lebedev, O. V., Ozerin, A. N., Kurkin, T., & Trofimov, A. (2021, September). Multi-Scale Modeling of Uniaxial Deformation of Electroconductive Polypropylene/Nanoparticles Composites Reinforced with Woven Glass Fiber [Paper]. 36th International Conference of the Polymer-Processing-Society (PPS 2021), Montréal, QC. External link

Leitao Martins, L. F. (2021). Étude de l'effet des conditions thermiques de fabrication sur la vie en fatigue à grand nombre de cycles de l'alliage AlSi7Mg produit par fabrication additive [Master's thesis, Polytechnique Montréal]. Available

Leitao Martins, L. F., Provencher, P. R., Brochu, M., & Brochu, M. (2021). Effect of Platform Temperature and Post-Processing Heat Treatment on the Fatigue Life of Additively Manufactured AlSi7Mg Alloy. Metals, 11(5), 23 pages. External link

Liguori, V. (2021). Analysis and Implementation of the Coupled and Encapsulated Selective Frequency Damping Method [Master's thesis, Polytechnique Montréal]. Available

Liguori, V., Plante, F., & Laurendeau, É. (2021, January). Implementation of an efficient Selective Frequency Damping method in a RANS solver [Paper]. 2021 AIAA Scitech Forum. External link

Lingua, A., Piccirelli, N., Therriault, D., & Lévesque, M. (2021, September). Microscale full-field measurements for additively manufactured composites undergoing interlayer delamination [Paper]. 36th International Conference of the Polymer Processing Society (PPS36), Montreal, Canada. Unavailable

Liu, L. (2021). Novel Method for Attenuation of Inlet Distorsion Effects on Turbofan Engines for Future Commercial Aircraft [Ph.D. thesis, Polytechnique Montréal]. Restricted access

Lopez Poncelas, M., La Barbera, L., Rawlinson, J. J., Crandall, D., & Aubin, C.-É. (2021). Credibility assessment of patient-specific biomechanical models to investigate proximal junctional failure in clinical cases with adult spine deformity using ASME V&V40 standard. Computer Methods in Biomechanics and Biomedical Engineering, 11 pages. External link

Lorans, A. (2021). Contrôle non destructif par ultrasons appliqué aux pièces métalliques issues de la fabrication additive et conventionnelle [Master's thesis, Polytechnique Montréal]. Available


Ma, Y., Engler, K., Vicente, S., Achiche, S., Lemire, B., Cruz, A. R., Thériault, L., Soussou, S., Regazzoni, B., Tu, G., Haj, M. N. E., de Pokomandy, A., Cox, J., Niaki, N. Z., & Lebouche, B. (2021, October). Usability of an artificial intelligence chatbot to facilitate self-management of antiretroviral therapy in HIV patients [Abstract]. 18th European AIDS Conference (EACS 2021), Londres, Royaume-Uni. Published in HIV Medicine, 22(S3). External link

Ma, Y., Vadean, A., Beltrame, G., & Achiche, S. (2021, October). Conceptual design of a nano satellite incubator using axiomatic design and a mechatronic multicriteria profile [Paper]. 23rd International Dependency and Structure Modeling Conference (DSM 2021), Montreal, Québec (10 pages). External link

Mahecha, D., Beaudry, C., Aubin, C.-É., & Armellini, F. (2021, May). Numerical transformation in the "health ecosystem" - A bibliometric analysis 1994-2021 [Paper]. 1st 4POINT0 Conference on Policies, Practices and Processes related to the Performance of Innovation Ecosystems. Unavailable

Marcotte, B., Sénécal-Léonard, É., Kummert, M., Scherrer, F., Audy-Roy, F., Ramirez, P., Fiset-Sauvageau, L., Fallaha, S., & Roy, P.-O. (2021). Évaluation du potentiel de valorisation des rejets thermiques au Québec - Rapport final (août 2021). (Technical Report). External link

Martin, É., Natarajan, A., Kottilingam, S., & Batmaz, R. (2021). Binder jetting of "Hard-to-Weld" high gamma prime nickel-based superalloy RENE 108. Additive Manufacturing, 39, 101894 (9 pages). External link

Maschiella, A. (2021). Modélisation de l'allumage d'un carburant hypergolique pour la propulsion de fusées hybrides [Master's thesis, Polytechnique Montréal]. Available

Mehrabian, M., & Boukhili, R. (2021). 3D-DIC strain field measurements in bolted and hybrid bolted-bonded joints of woven carbon-epoxy composites. Composites Part B: Engineering, 218, 12 pages. External link

Memarianpour, M., Niknam, S. A., Turenne, S., & Balazinski, M. (2021). Study of the effects of initial cutting conditions and transition period on ultimate tool life when machining inconel 718. Materials, 14(3), 592 (13 pages). Available

Menshenin, Y., Moreno, C., Brovar, Y., & Fortin, C. (2021). Integration of MBSE and PLM: complexity and uncertainty. International Journal of Product Lifecycle Management, 13(1), 66-88. External link

Mérabet, R. (2021). Aerodynamic Simulations of Helicopter Rotors through the Actuator Line Method [Ph.D. thesis, Polytechnique Montréal]. Available

Merabet, R., & Laurendeau, É. (2021, June). Actuator line method for helicopter rotors computations in various flight conditions [Paper]. 65th Aeronautics Conference (AERO 2021) (15 pages). Unavailable

Merabet, R., & Laurendeau, É. (2021). Hovering Helicopter Rotors Modeling Using the Actuator Line Method. Journal of Aircraft, 14 pages. External link

Mirshekari, B., Zarei-Hanzaki, A., Barabi, A., Abedi, H. R., Lee, S. J., & Fujii, H. (2021). An anomalous effect of grain refinement on yield stress in friction stir processed lightweight steel. Materials Science and Engineering A, 799, 6 pages. External link

Mirshekari, B., Zarei-Hanzaki, A., Barabi, A., Abedi, H. R., Lee, S. J., & Fujii, H. (2021). The correlation of austenite stability and sequence of strain accommodation during room temperature deformation of a duplex lightweight steel. Journal of Materials Research and Technology, 13, 1923-1932. External link

Montazerijouybari, M., Baron, L., & Kelouwani, S. (2020, September). Kinematics of 2-DOF AGVs with Differential Driving Wheels and Caster Wheels Modeling [Paper]. 23rd CISM-IFToMM Symposium on Theory and Practice of Robots and Manipulators (ROMANSY 23), Sapporo, Japan. External link

Mouazé, N. (2021). Analyse de la saisie d'objets déformables par des pinces adaptatives [Ph.D. thesis, Polytechnique Montréal]. Available

Mouazé, N., & Birglen, L. (2021, June). Point-spring modeling of the grasp of a deformable object by an angular gripper [Paper]. CCToMM Mechanisms, Machines and Mechatronics (M3) Symposium, En ligne / Online (12 pages). External link

Mouazé, N., Nguyen, T., & Birglen, L. (2021). Non-cylindrical wrapping rods and compliant adapters for multi-mode twisting string actuation. International Journal of Mechanisms and Robotic Systems, 5(1-2), 93-110. External link


Nassar, F. (2021). Force Analysis of Minimal Self-adaptive Fingers Using Variations of Four-Bar Linkages [Master's thesis, Polytechnique Montréal]. Available

Nassar, F., & Birglen, L. (2021). Force analysis of minimal self-adaptive fingers using variations of four-bar linkages. Mechanical Sciences, 12(2), 1037-1049. External link

Neale, A. (2021). Development of a Bottom-up White-box Residential Building Stock Energy Model [Ph.D. thesis, Polytechnique Montréal]. Available

Nguiadem, C., Raison, M., & Achiche, S. (2021). Impact of the choice of upper limb prosthesis mechanism on kinematics, and dynamic quality. Medical Engineering and Physics, 94, 16-25. External link

Nguyen, M. T., & Aly, A. M. (2021). Entropy generation analysis of natural convection in a non-darcy anisotropic porous cavity. Journal of Porous Media, 24(7), 75-101. External link

Norouzi, S., Le Floc'h, A., Di Labbio, G., & Kadem, L. (2021). Flow examination in abdominal aortic aneurysms: Reduced-order models driven by in vitro data and spectral proper orthogonal decomposition. Physics of Fluids, 33(11), 6 pages. External link

Nyssen, F., & Batailly, A. (2021). Investigation on the Robustness of Rotor/Stator Contact Interactions With Respect to Small Mistuning. Journal of Engineering for Gas Turbines and Power-Transactions of the Asme, 143(12), 121015 (10 pages). External link


Omé, V. (2021). Conception et optimisation d'un bras robotique ultraléger pour le déploiement de tâches de contact par drone [Master's thesis, Polytechnique Montréal]. Restricted access

Ouchebri, I., & Mahdi, T.-F. (2021). Automatic incorporation of circular riverbank failures in two-dimensional flood modeling. Canadian Journal of Civil Engineering, 48(8), 1004-1019. Available


Papillon Laroche, H., Bourgault-Cote, S., & Laurendeau, É. (2021, August). Multi-Layer Stochastic Ice Accretion Model for Aircraft Icing [Paper]. AIAA Aviation 2021 Forum. External link

Papillon Laroche, H., Bourgault-Côté, S., Parenteau, M., & Laurendeau, É. (2021, June). Development of an aircraft aero-icing suite using chapel programming language [Paper]. 8th annual Chapel Implementers and Users Workshop (CHIUW 2021). Unavailable

Parent, A., Marois, P., Letellier, G., Raison, M., Mercier, C., & Ballaz, L. (2021). Experience-based decision-tree process for selective dorsal rhizotomy based on clinical assessment in children with cerebral palsy. Annals of Physical and Rehabilitation Medicine, 64(3), 101287 (4 pages). External link

Parenteau, M. (2021). A Non-Linear Frequency Domain Potential Flow Model for Compressible, Transonic and Viscous Aeroelastic Analyses [Ph.D. thesis, Polytechnique Montréal]. Available

Parenteau, M., & Laurendeau, É. (2021). A transonic, viscous nonlinear frequency domain Vortex Lattice Method for aeroelastic analyses. Journal of Fluids and Structures, 107, 103406 (26 pages). External link

Parenteau, M., Bourgault-Cote, S., Plante, F., Kayraklioglu, E., & Laurendeau, É. (2021, January). Development of parallel CFD applications with the Chapel Programming Language [Paper]. AIAA Scitech 2021 Forum, En ligne / Online. External link

Pellerin, N., Leclaire, S., & Reggio, M. (2021). An interpolation-based lattice Boltzmann method for non-conforming orthogonal meshes. Computers and Mathematics with Applications, 100, 152-166. External link

Pessard, E., Lavialle, M., Laheurte, P., Didier, P., & Brochu, M. (2021). High-cycle fatigue behavior of a laser powder bed fusion additive manufactured Ti-6Al-4V titanium: Effect of pores and tested volume size. International Journal of Fatigue, 149, 12 pages. External link

Piccirelli, N., Therriault, D., Otero Navas, I., Diouf Leiws, A., Iervolino, F., & Abderrafai, Y. (2021). Composition for additive manufacturing. [Composition pour fabrication additive]. (Patent Application no. CA3078975). External link

Pierre, J., Iervolino, F., Piccirelli, N., & Therriault, D. (2021, September). Additive manufacturing of composite sandwich panels for acoustic applications [Paper]. 36th International Conference of the Polymer Processing Society (PPS36), Montreal, Canada. Unavailable

Pierre, J., Verville, M., Farahani, R. D., & Therriault, D. (2021). Objective 3: Additive manufacturing of acoustic sandwich panels using the materials developed in O1. (Technical Report). Unavailable

Pike, A. (2021). Evaluating Synergies Between Heating and Electricity Networks to Guide Decarbonization Strategies for Remote, Northern Communities [Master's thesis, Polytechnique Montréal]. Available

Pike, A., & Kummert, M. (2021). An archetype-based energy modelling approach for a remote, subarctic community. Journal of Building Performance Simulation, 14(6), 666-687. External link

Pipitone, F., Achiche, S., Appio, F. P., & Martini, A. (2021). Building an ANFIS-Based Decision Support System for Regional Growth: The Case of European Regions. IEEE Transactions on Engineering Management, 68(3), 838-852. External link

Plante, F., Laurendeau, É., & Dandois, J. (2021, January). Lift cell prediction using a lifting-surface model [Paper]. 2021 AIAA Scitech Forum. External link

Plante, F., Laurendeau, É., & Dandois, J. (2021). Stall Cell Prediction Using a Lifting-Surface Model. AIAA Journal, 11 pages. External link

Popescu, R. I., Raison, M., Popescu, G. M., Saussié, D., & Achiche, S. (2021). Design and development of a novel type of table tennis aerial robot player with tilting propellers. Mechatronics, 74, 13 pages. External link

Praud, F., Schmitt, T., Zabeida, O., Maiza, S., Martinu, L., & Lévesque, M. (2021). Phase field fracture models to predict crack initiation and propagation in anti-reflective coatings. Thin Solid Films, 736, 14 pages. External link

Prieto, C., & Cimmino, M. (2021). Thermal interactions in large irregular fields of geothermal boreholes: the method of equivalent boreholes. Journal of Building Performance Simulation, 14(4), 446-460. Available

Prieto, C., & Cimmino, M. (2021). Transient Multipole Expansion for Heat Transfer in Ground Heat Exchangers. Science and Technology for the Built Environment, 27(3), 253-270. Available


Raballand, C. (2021). Modélisation biomécanique de la chirurgie par modulation de croissance de la colonne vertébrale scoliotique : analyse pour prévenir les déformations périphériques subséquentes [Master's thesis, Polytechnique Montréal]. Available

Rafiee, M., Granier, F., & Therriault, D. (2021). Advances in coaxial additive manufacturing and applications. Advanced Materials Technologies, 6(11), 2100356. Available

Rajaee, M. A., Arjmand, N., & Shirazi-Adl, A. (2021). A novel coupled musculoskeletal finite element model of the spine Critical evaluation of trunk models in some tasks. Journal of Biomechanics, 119, 10 pages. External link

Raynaud, G. (2021). Study of Physics-Informed Neural Networks to Solve Fluid-Structure Problems for Turbine-like Phenomena [Master's thesis, Polytechnique Montréal]. Available

Robitaille, B., Provencher, P. R., St-Georges, L., & Brochu, M. (2021). Mechanical properties of 2024-T3 AlClad aluminum FSW lap joints and impact of surface preparation. International Journal of Fatigue, 143, 105979 (12 pages). External link

Roy-Lachapelle, A., Solliec, M., Sauvé, S., & Gagnon, C. (2021). Evaluation of ELISA-based method for total anabaenopeptins determination and comparative analysis with on-line SPE-UHPLC-HRMS in freshwater cyanobacterial blooms. Talanta, 223, 121802 (9 pages). External link


Saeed, F., Ahmed, K. Z., Owes, A. O. E., & Paraschivoiu, I. (2021). Anti-icing hot air jet heat transfer augmentation employing inner channels. Advances in Mechanical Engineering, 13(12), 13 pages. External link

Sansone, A. (2021). Modélisation numérique tridimensionnelle directe de l'évolution d'une bulle d'air dans un écoulement d'eau [Master's thesis, Polytechnique Montréal]. Available

Sarwark, J. F., Castelein, R. M., Lam, T. P., Aubin, C.-É., Maqsood, A., Moldovan, F., & Cheng, J. (2021). Elucidating the inherent features of IS to better understand idiopathic scoliosis etiology and progression. Journal of Orthopaedics, 26, 126-129. External link

Saute, B., Pelzmann, T., Gagnon, J.-P., & Dupont, F. (2021, June). Absolute Temperature and Emissivity Determination of Heated Materials Using Multispectral IR Imaging and N-Color TES Image [Paper]. 4th European Conference on Plasma Diagnostics (ECPD 2021) (1 page). External link

Scolan, Y.-M., & Étienne, S. (2021). Properties of the pressure field in highly nonlinear free surface flows with critical jet. Journal of Engineering Mathematics, 128(1), 4 (17 pages). External link

Seifollahi Moghadam, Z., Guibault, F., & Garon, A. (2021). On the evaluation of mesh resolution for large-eddy simulation of internal flows using openfoam. Fluids, 6(1), 24 (17 pages). Available

Selwanis, M. M. M. (2021). Ball-in-Track Nonlinear Energy sinks for Galloping Mitigation [Ph.D. thesis, Polytechnique Montréal]. Available

Selwanis, M. M., Franzini, G. R., Béguin, C., & Gosselin, F. (2021). Wind tunnel demonstration of galloping mitigation with a purely nonlinear energy sink. Journal of Fluids and Structures, 100, 103169 (13 pages). External link

Sepahi Boroujeni, S. (2021). Uncertainty of Form and Size Measurement with On-Machine Tool Metrology [Ph.D. thesis, Polytechnique Montréal]. Available

Sepahi-Boroujeni, S., Mayer, J. R. R., & Khameneifar, F. (2021). Efficient uncertainty estimation of indirectly measured geometric errors of five-axis machine tools via Monte-Carlo validated GUM framework. Precision Engineering, 67, 160-171. External link

Sepahi-Boroujeni, S., Mayer, J. R. R., Khameneifar, F., & Wozniak, A. (2021). A full-covariance uncertainty assessment in on-machine probing. International Journal of Machine Tools and Manufacture, 167, 12 pages. External link

Serrano-Munoz, I., Fritsch, T., Mishurova, T., Trofimov, A., Apel, D., Ulbricht, A., Kromm, A., Hesse, R., Evans, A., & Bruno, G. (2021). On the interplay of microstructure and residual stress in LPBF IN718. Journal of Materials Science, 56(9), 5845-5867. Available

Sharifi, M., & Shirazi-Adl, A. (2021). Changes in gastrocnemii activation at mid-to-late stance markedly affects the intact and anterior cruciate ligament deficient knee biomechanics and stability in gait. KNEE, 29, 530-540. External link

Sharifi, M., & Shirazi-Adl, A. (2021). Knee flexion angle and muscle activations control the stability of an anterior cruciate ligament deficient joint in gait. Journal of Biomechanics, 117, 9 pages. External link

Sion, A., Birglen, L., & Wouwer, A. V. (2021, June). Gait simulation of an hexapodal robot walking across various terrains [Paper]. CCToMM Symposium on Mechanisms, Machines, and Mechatronics (CCToMM M3 2020), En ligne / Online. External link

Slamani, M., Chatelain, J.-F., Il, A., & Balazinski, M. (2021). Statistical analysis and modeling of temperature distribution during various milling operations of thin walled aircraft parts. Physica A: Statistical Mechanics and its Applications, 570, 20 pages. External link

Sosa Rey, F., Lingua, A., Lampron, O., Lévesque, M., & Therriault, D. (2021). Objective 2: Predict mechanical response of AM composites. (Technical Report). Unavailable

Sosa-Rey, F., Piccirelli, N., Therriault, D., & Lévesque, M. (2021, September). Segmentation tool for the extraction of individual fibers from micro-tomographs of additively manufactured reinforced polymer composites [Paper]. International Materials, Applications and Technology (IMAT) 2021, St. Louis, MO, US. Unavailable

Souaga, J. J. (2021). Simulation numérique des vibrations de faisceaux de tubes soumis à un écoulement transverse : cas d'un écoulement de jet [Master's thesis, Polytechnique Montréal]. Available

Sun, Y. (2021). Flow and heat transfer Analysis in Granular beds for Injection Molding [Ph.D. thesis, Polytechnique Montréal]. Available


Taha, H. A., Yacout, S., & Birglen, L. (2020, November). Detection and Monitoring for Anomalies and Degradation of a Robotic Arm Using Machine Learning [Paper]. Stuttgart Conference on Automative Production (SCAP 2020). External link

Tangestani, R., Sabiston, T., Chakraborty, A., Muhammad, W., Lang, Y., & Martin, É. (2021). An Efficient Track-Scale Model for Laser Powder Bed Fusion Additive Manufacturing: Part 1- Thermal Model. Frontiers in Materials, 8, 14 pages. External link

Tangestani, R., Sabiston, T., Chakraborty, A., Yuan, L., Krutz, N., & Martin, É. (2021). An Efficient Track-Scale Model for Laser Powder Bed Fusion Additive Manufacturing: Part 2-Mechanical Model. Frontiers in Materials, 8, 759669 (14 pages). External link

Tenni, B., Godin, S., Thibault, D., & Brochu, M. (2021). Shielding Gas and Inclusion Content Effects on Impact Toughness and Tensile Properties of 410NiMo Steel Welds. Welding Journal, 100(2), 52S-62S. External link

Testoni, O., Lumpe, T., Huang, J.-L., Wagner, M., Bodkhe, S., Zhakypov, Z., Spolenak, R., Paik, J., Ermanni, P., Muñoz, L., & Shea, K. (2021). A 4D printed active compliant hinge for potential space applications using shape memory alloys and polymers. Smart Materials and Structures, 30(8), 13 pages. External link

Therriault, D., & Farahani, R. D. (2021, November). Design of multifunctional composites and their advanced additive manufacturing [Paper]. Additive Fabrication of Composites (ADDFABCONF 2021). External link

Toloup, C., Trofimov, A., Lévesque, M., & Therriault, D. (2021). Supplementary Objective 1: 3D reinforced composites manufactured by Resin Transfer Molding (RTM). (Technical Report). Unavailable

Toussaint, B., & Raison, M. (2021, December). High-Speed Trajectory Tracking on Robotic Arm by Learning the Dynamic Response of the PID Controller with a Neural Network [Paper]. ECCOMAS Multibody Dynamics Conference. Unavailable

Trofimov, A., Le-Pavic, J., Ravey, C., Albouy, W., Therriault, D., & Lévesque, M. (2021). Multi-scale modeling of distortion in the non-flat 3D woven composite part manufactured using resin transfer molding. Composites Part A: Applied Science and Manufacturing, 140, 106145 (19 pages). Available

Trofimov, A., Lévesque, M., & Therriault, D. (2021). Supplementary Objective 2: Simulation of additively manufactured composites. (Technical Report). Unavailable

Trofimov, A., Markov, A., & Sevostianov, I. (2021, April). A unified methodology for computation of compliance and stiffness contribution tensors of inhomogeneities of arbitrary 2D and 3D shapes-open access software [Paper]. International Workshop Engineered Materials for Sustainable Structures (EM4SS 2021). External link

Trouillefou, C. M., Law-Kam Cio, Y.-S., Jolicoeur, M., Said, B., Galarneau, A., Achiche, S., & Beltrame, G. (2021). An autonomous plant growing miniaturized incubator for a Cubesat. Acta Astronautica, 179, 439-449. External link

Tucny, J.-M., Vidal, D., Leclaire, S., & Bertrand, F. (2021, December). Convergence order of the Lattice Boltzmann method in rarefied regimes [Abstract]. Workshop on Controlling Error and Efficiency of Numerical Models: Methods, benchmarks, and case studies, Toronto, Ont.. External link

Turcot, G., Paquet, D., Lévesque, M., & Turenne, S. (2021). A novel inverse methodology for the extraction of bulk elasto-plastic tensile properties of metals using spherical instrumented indentation. International Journal of Solids and Structures, 236-237, 20 pages. External link


van der Beek, B. (2021). Développement d'un outil numérique pour la simulation du contact aube/carter [Master's thesis, Polytechnique Montréal]. Available

Vasfi Marandi, M. (2021). Numerical Study of Cavitating Flow Over a Hydrofoil [Master's thesis, Polytechnique Montréal]. Available

Velasco Acosta, A. P. (2021). Développement d'une méthodologie de sélection de méthodes pour la planification et le contrôle de la fabrication [Ph.D. thesis, Polytechnique Montréal]. Available

Vidal, J.-F., Fröhlicher, K., Archier, P., Hébert, A., Buiron, L., Palau, J.-M., Pastoris, S., & Raynaud, D. (2020, March). New reference APOLLO3® calculation scheme for light water reactors – analysis of the BEAVRS benchmark [Paper]. International Conference on Physics of Reactors: Transition to a Scalable Nuclear Future (PHYSOR 2020), Cambridge, UK (8 pages). Published in EPJ Web of Conferences, 247. Available

Viviescas, G., Saidi, H., Bernier, M., & Kummert, M. (2021, June). Energy performance advantages of using multiple compressors in a heat pump operating iin heating mode [Paper]. Biennial Conference of IBPSA-Canada (eSIM 2021) (10 pages). Unavailable


Wang, X., & Caloz, C. (2021). Spread-Spectrum Selective Camouflaging Based on Time-Modulated Metasurface. IEEE Transactions on Antennas and Propagation, 69(1), 286-295. External link

Wang, X., & Yang, G.-M. (2021). Linear-polarization metasurface converter with an arbitrary polarization rotating angle. Optics Express, 29(19), 30579-30589. External link

Wang, X., Aubin, C.-É., & Schwend, R. M. (2021, January). Concave or convex rod translation first in adolescent idiopathic scoliosis instrumentation with differential rod contouring? [Paper]. International Research Society of Spinal Deformities bi-annual meeting. External link


Xing, K., Rimpault, X., Mayer, J. R. R., Chatelin, J.-F., & Achiche, S. (2021, March). Quantitative assessment of machine tools precision states through fractal analysis of machine error parameters [Paper]. 14th International Conference & Exhibition on Laser Metrology, Coordinate Measuring Machine and Machine Tool Performance (LAMDAMAP 2021) (10 pages). External link


Yadav, G., Shanmugam, S., Sivaramakrishnan, R., Kumar, D., Mathimani, T., Brindhadevi, K., Pugazhendhi, A., & Rajendran, K. (2021). Mechanism and challenges behind algae as a wastewater treatment choice for bioenergy production and beyond. Fuel, 285, 119093 (10 pages). External link

Yahia, L., Bayade, G., & Laboureau, J.-P. (2021). Biomimetic Challenge of Anterior Cruciate Ligament Design. In Ligament Reconstructions (243-300). External link

Yahia, L., Bayade, G., Klingler, W., & Schleip, R. (2021). Recent Evolution of the ACL Reconstruction. In Ligament Reconstructions (63-107). External link

Yahia, L., Bayade, G., Klingler, W., & Schleip, R. (2021). A Review of Cruciate Ligaments: ACL's Injury and Healing Processes. In Ligament Reconstructions (48 pages). External link

Yanez-Sanchez, S. I., Lennox, M. D., Therriault, D., Favis, B. D., & Tavares, J. R. (2021). Model approach for binder selection in binder jetting. Industrial & Engineering Chemistry Research, 60(42), 15162-15173. Available

Yazdani Sarvestani, H., Akbarzadeh, A. H., Therriault, D., & Lévesque, M. (2021). Engineered bi-material lattices with thermo-mechanical programmability. Composite Structures, 263, 113705 (13 pages). External link

Yong, A. X. H., Aktas, A., May, D., Endruweit, A., Advani, S., Hubert, P., Abaimov, S. G., Abliz, D., Akhatov, I., Ali, M. A., Allen, T., Berg, D. C., Bickerton, S., Brauner, C., Brütsch, D., Caglar, B., Caglar, H., Causse, P., Chiminelli, A., ... Willenbacher, B. (2021). Out-of-plane permeability measurement for reinforcement textiles: A benchmark exercise. Composites Part A: Applied Science and Manufacturing, 148, 16 pages. External link

Yong, A. X. H., Aktas, A., May, D., Endruweit, A., Lomov, S. V., Advani, S., Hubert, P., Abaimov, S. G., Abliz, D., Akhatov, I., Ali, M. A., Allaoui, S., Allen, T., Berg, D. C., Bickerton, S., Caglar, B., Causse, P., Chiminelli, A., Comas-Cardona, S., ... Wang, J. H. (2021). Experimental characterisation of textile compaction response: A benchmark exercise. Composites Part A: Applied Science and Manufacturing, 142, 16 pages. External link

Yousefian, S., Zarei-Hanzaki, A., Barabi, A., Abedi, H. R., Moallemi, M., & Karjalainen, P. (2021). Microstructure, texture and mechanical properties of a nickel-free high nitrogen duplex stainless steel processed through friction stir spot welding. Journal of Materials Research and Technology-Jmr&T, 15, 6491-6505. External link

Yue, L., Heuzey, M.-C., Jalbert, J., & Lévesque, M. (2021). On the tri-dimensional constitutive theory identification of linearly viscoelastic solids based on Bayesian framework. International Journal of Solids and Structures, 230-231, 19 pages. External link


Zahedi, H., Mascle, C., & Baptiste, P. (2021). A multi-variable analysis of aircraft structure disassembly A technico-economic approach to increase the recycling performance. Sustainable Materials and Technologies, 29, 11 pages. External link

Zeb, G., Duong, T. L., Balazinski, M., & Le, X. T. (2021). Direct Electroless Deposition of Nickel onto Silicon Nitride Ceramic: A Novel Approach for Copper Metallization of Micro-/Nano-fabricated Devices. Advanced Engineering Materials, 23(2), 8 pages. External link

Zhang, K., & Kummert, M. (2021). Evaluating the impact of thermostat control strategies on the energy flexibility of residential buildings for space heating. Building Simulation, 14(5), 1439-1452. External link

Zhang, L., She, D., Shi, L., Chambon, R., & Hébert, A. (2021, June). Multi-group cross section library generation for HTGR lattice physics code XPZ [Paper]. International Conference on High-Temperature Reactor Technology (HTR 2021) (10 pages). Published in Journal of Physics: Conference Series, 2048(1). External link

Zoghlami, S., Béguin, C., Teyssedou, A., Scott, D., Bornard, L., & Étienne, S. (2021). Bubble cloud configuration effect on the added mass. Physics of Fluids, 33(5), 14 pages. External link

Zou, S., Therriault, D., & Gosselin, F. (2021). Toughening elastomers via microstructured thermoplastic fibers with sacrificial bonds and hidden lengths. Extreme Mechanics Letters, 43, 101208 (9 pages). Available

List generated on: Thu Sep 21 08:20:20 2023 EDT