 | Up a level |
Ahmadfard, M. (2018). A Comprehensive Review of Vertical Ground Heat Exchangers Sizing Models With Suggested Improvements [Ph.D. thesis, École Polytechnique de Montréal]. Available
Ahmadfard, M., & Bernier, M. (2018). Modifications to ASHRAE's sizing method for vertical ground heat exchangers. Science and Technology for the Built Environment, 24(7), 803-817. External link
Alami Mchichi, N. (2018). Étalonnage des machines-outils à cinq axes : configuration optimisée des artefacts et de la séquence de mesure de la méthode SAMBA en vue d'une estimation efficace des erreurs géométriques [Ph.D. thesis, École Polytechnique de Montréal]. Available
Alloui, Z., Alloui, Y., & Vasseur, P. (2018). Control of Rayleigh-Benard Convection in a Fluid Layer with Internal Heat Generation. Microgravity Science and Technology, 30(6), 885-897. External link
Alsinani, N. A., & Laberge Lebel, L. (2018, September). Effect of length variation of flax/polypropylene pellets produced by multi-die pultrusion on the quality of injection molded product [Paper]. 18th Annual Society for Plastics Engineers Automotive Composites Conference & Exhibition, Novi, Michigan. External link
Ammar, S. (2018, July). The interactive quiz: an educational approach to improve the retention and participation of students in practical work [Paper]. EDULEARN 2018, Palma, Spain. External link
Amrom, V. (2018). Lois de paroi pour les écoulements turbulents présentant des gradients de pression adverses [Master's thesis, École Polytechnique de Montréal]. Available
Arabi, S., Trépanier, J.-Y., Camarero, R., Robin-Jouan, P., Guiavarch, P., & Zhou, T. (2018, September). CFD simulation of multi-component real-gas flows in high voltage circuit breaker chambers [Paper]. 22nd International Conference on Gas Discharges and their Applications, Novi Sad, Serbia. Unavailable
Armellini, F., Beaudry, C., & Achiche, S. (2018, September). Assessing interrater fidelity for continuous innovation : how differently is innovation perceived by R&D and operations management? [Paper]. 19th International Continuous Innovation Network Conference (CINet 2018), Dublin, Ireland. Unavailable
Ashrafi, F., & Vo, H. D. (2018, June). Assessment of flow control strategies for improving centrifugal compressor efficiency [Paper]. ASME Turbo Expo 2018 : Turbomachinery Technical Conference and Exposition (GT 2018), Oslo, Norway (11 pages). External link
Attendu, J.-M., & Ross, A. (2018). Sparse regularization for reconstructing transient sources with time domain nearfield acoustical holography. Journal of the Acoustical Society of America, 143(6), 3796-3806. External link
Attendu, J.-M., & Ross, A. (2018). Time domain nearfield acoustical holography with three-dimensional linear deconvolution. Journal of the Acoustical Society of America, 143(3), 1672-1683. External link
Aubin, C.-É., Clin, J., & Rawlinson, J. (2018). Biomechanical simulations of costo-vertebral and anterior vertebral body tethers for the fusionless treatment of pediatric scoliosis. Journal of Orthopaedic Research, 36(1), 254-264. External link
Azari, F., Arjmand, N., Shirazi-Adl, A., & Rahimi-Moghaddam, T. (2017, May). A combined passive and active musculoskeletal model study to estimate L4-L5 load sharing [Paper]. 2nd International Workshop on Spinal Loading and Deformation, Berlin, Germany. Published in Journal of Biomechanics, 70. External link
Bafrouei, B. B., Zhang, K., & Kummert, M. (2018, May). Energy flexibility analysis of photovoltaic system with batteries for residential buildings [Paper]. Building Performance Simulation Conference (eSim 2018), Montréal, Québec. External link
Bakhtiari, M., Lakis, A. A., & Kerboua, Y. (2018). Nonlinear vibration of truncated conical shells : Donnell, Sanders and Nemeth theories. (Technical Report n° EPM-RT-2018-01). Available
Bawin, A. (2018). Adaptation anisotrope pour maillages d'éléments d'ordre élevé [Master's thesis, École Polytechnique de Montréal]. Available
Beaini, D. (2018). Object analysis in images using electric potentials and electric fields. (Patent Application no. WO2018045472). External link
Beaini, D., Achiche, S., Law-Kam Cio, Y.-S., & Raison, M. (2018). Novel convolution kernels for computer vision and shape analysis based on electromagnetism. (Report). Available
Bella, Y., Oulmane, A., & Mostefai, M. (2018). Industrial bearing fault detection using time-frequency analysis. Engineering Technology & Applied Science Research, 8(4), 3294-3299. External link
Belzile, B., & Birglen, L. (2018). Practical considerations on proprioceptive tactile sensing for underactuated fingers. Transactions of the Canadian Society for Mechanical Engineering, 42(1), 71-79. Available
Ben Yakhlef, H. (2018). Conception et mise en place de l'instrumentation nécessaire à la comparaison entre la position à l'outil et la position à l'encodeur de l'outil d'une machine-outil à commande numérique 5-axes [Master's thesis, École Polytechnique de Montréal]. Available
Benavente, M., Marcin, L., Courtois, A., Lévesque, M., & Ruiz, E. (2018). Numerical analysis of viscoelastic process-induced residual distortions during manufacturing and post-curing. Composites Part A: Applied Science and Manufacturing, 107, 205-216. External link
Benkaddour, A., Lebrun, G., & Laberge Lebel, L. (2018). Thermostamping of [0/90]ₙ carbon/peek laminates: Influence of support configuration and demolding temperature on part consolidation. Polymer Composites, 39(9), 3341-3352. External link
Benoit, D., Aubin, C.-É., Wang, X., & Crandall, D. G. (2018, November). Biomechanical analysis of surgical instrumentation for adult sagittal imbalance with pedicle subtraction osteotomy [Paper]. 48e Réunion annuelle de la Société de scoliose du Québec, Bromont, Québec, Canada. Unavailable
Berthoul, B., Batailly, A., Stainier, L., Legrand, M., & Cartraud, P. (2018). Phenomenological modeling of abradable wear in turbomachines. Mechanical Systems and Signal Processing, 98, 770-785. External link
Bianchetti, C. (2018). Analytical Fatigue Life Prediction of Shot Peened 7050-T7451 Aluminium Alloy [Ph.D. thesis, École Polytechnique de Montréal]. Available
Bianchetti, C., Delbergue, D., Bocher, P., Lévesque, M., & Brochu, M. (2018). Analytical fatigue life prediction of shot peened AA 7050-T7451. International Journal of Fatigue, 118, 271-281. External link
Bianchetti, C., Lévesque, M., & Brochu, M. (2018). Probabilistic analysis of the effect of shot peening on the high and low cycle fatigue behaviors of AA 7050-T7451. International Journal of Fatigue, 111, 289-298. External link
Bianchetti, C., Zheng, R., Chromik, R. R., Lévesque, M., & Brochu, M. (2018). Comparison of small and long fatigue crack growth behavior in AA 7050-T7451. Engineering Fracture Mechanics, 202, 20-32. External link
Birglen, L. (2018). Mécatronique : cours avec exercices corrigés. (2nd ed.). Unavailable
Birglen, L., & Schlicht, T. (2018). A statistical review of industrial robotic grippers. Robotics and Computer-Integrated Manufacturing, 49, 88-97. External link
Bitar-Nehme, E., & Mayer, J. R. R. (2018). Modelling and compensation of dominant thermally induced geometric errors using rotary axes power consumption. CIRP Annals, 67(1), 547-550. External link
Blanchet, L., Lecours, S., Docquier, Q., Barron, O., Achiche, S., & Raison, M. (2018, June). Towards the optimal design of a passive upper limb exoskeleton compensating gravity [Paper]. 5th Joint International Conference on Multibody System Dynamics, Lisbon, Portugal. External link
Bodkhe, S., Noonan, C., Gosselin, F., & Therriault, D. (2018). Coextrusion of Multifunctional Smart Sensors. Advanced Engineering Materials, 20(10), 1800206 (6 pages). External link
Bodkhe, S., Rajesh, P. S. M., Gosselin, F., & Therriault, D. (2018). Simultaneous 3D printing and poling of PVDF and its nanocomposites. ACS Applied Energy Materials, 1(6), 2474-2482. External link
Bougrinat, Y. (2018). Design and Development of a Lightweight Ankle Exoskeleton for Human Walking Augmentation [Master's thesis, École Polytechnique de Montréal]. Available
Bouheret, S., & Bernier, M. (2018). Modelling of a water-to-air variable capacity ground-source heat pump. Journal of Building Performance Simulation, 11(3), 1-11. Available
Bourgault-Cote, S., Docampo-Sánchez, J., & Laurendeau, É. (2018, January). Multi-layer ice accretion simulations using a level-set method with B-spline representation [Paper]. AIAA Aerospace Sciences Meeting, Kissimmee, Florida. External link
Bouvard, J. (2018). Étude de l'injection de bulles d'air dans un écoulement d'eau [Master's thesis, École Polytechnique de Montréal]. Available
Bouvard, J., Béguin, C., Étienne, S., Scott, D., & Bornard, L. (2018, September). Characterization of bubble cloud quality and evolution using optical probes [Paper]. 29th IAHR Symposium on Hydraulics Machinery and Systems (HMS 2018), Kyoto, Japan. External link
Boyer, L., Shen, J., Parent, S., Kadoury, S., & Aubin, C.-É. (2018). Accuracy and precision of seven radiography-based measurement methods of vertebral axial rotation in adolescent idiopathic scoliosis. Spine Deformity, 6(4), 351-357. External link
Brazeau-Séguin, J. (2018). Développement d'un outil de simulation pour la conception de préformes par tissage 3D [Master's thesis, École Polytechnique de Montréal]. Available
Brideau, S. A., Beausoleil-Morrison, I., & Kummert, M. (2018). Above-floor tube-and-plate radiant floor model development and validation. Journal of Building Performance Simulation, 11(4), 449-469. External link
Brussieux, Y., & Bernier, M. (2018, September). A hybrid model for generating short-time g-functions [Paper]. 2018 IGSHPA Research Track, Stockholm, Sweden (9 pages). External link
Burgarella, B., Marcoux, A., & Laberge Lebel, L. (2018, July). Understanding the damage evolution of dry carbon fibre yarns in contact with pulleys during textile processing [Presentation]. In 13th World Congress in Computational Mechanics, New York, N. Y.. External link
Butler, S. (2018). Contrôle et optimisation d'un procédé de fabrication de mousses acoustiques thermodurcissables à porosité ouverte [Master's thesis, École Polytechnique de Montréal]. Available
Caggiano, A., Rimpault, X., Teti, R., Balazinski, M., Chatelain, J.-F., & Nele, L. (2018). Machine learning approach based on fractal analysis for optimal tool life exploitation in CFRP composite drilling for aeronautical assembly. CIRP Annals, 67(1), 483-486. External link
Calloo, A., & Hébert, A. (2018, June). Development and evaluation of a discontinuous galerkin method in the DRAGON5 code [Paper]. 38th Annual Conference of the Canadian Nuclear Society, Saskatoon, SK. Unavailable
Canals, L. (2018). Preliminary Assessment of the Vibro-Peening Process for Improving the Fatigue Life of Aerospace Components [Master's thesis, École Polytechnique de Montréal]. Available
Cauchy, X. (2018). Approaching Typical Metallic Conductivities in Polymer Nanocomposites for Lightning Strike Protection [Ph.D. thesis, École Polytechnique de Montréal]. Available
Cauchy, X., Sapieha, J.-E., & Therriault, D. (2018). Hybrid Carbon-Silver Nanofillers for Composite Coatings with Near Metallic Electrical Conductivity. Advanced Engineering Materials, 20(12). External link
Causse, P., Ravey, C., & Trochu, F. (2018). Capillary characterization of fibrous reinforcement and optimization of injection strategy in resin transfer molding. Journal of Composites Science, 2(2). Available
Chablat, D., Baron, L., Jha, R., & Rolland, L. (2018, July). The 3-PPPS Parallel Robot with U-Shape Base, a 6-DOF Parallel Robot with Simple Kinematics [Paper]. 16th International Symposium on Advances in Robot Kinematics (ARK 2018), Bologna, Italy. External link
Che, H., Gagné, M., Rajesh, P. S. M., Sapieha, J.-E., Sirois, F., Therriault, D., & Yue, S. (2018). Metallization of Carbon Fiber Reinforced Polymers for Lightning Strike Protection. Journal of Materials Engineering and Performance, 27(10), 5205-5211. External link
Chevrefils, C., Périé-Curnier, D., Parent, S., & Cheriet, F. (2018). To distinguish flexible and rigid lumbar curve from MRI texture analysis in adolescent idiopathic scoliosis: A feasibility study. Journal of Magnetic Resonance Imaging, 48(1), 178-187. External link
Cimmino, M. (2018). Fast calculation of the g-functions of geothermal borehole fields using similarities in the evaluation of the finite line source solution. Journal of Building Performance Simulation, 11(6), 655-668. Available
Cimmino, M. (2018). A finite line source simulation model for geothermal systems with series- and parallel-connected boreholes and independent fluid loops. Journal of Building Performance Simulation, 11(4), 414-432. Available
Cimmino, M. (2018, September). g-functions for bore fields with mixed parallel and series connections considering axial fluid temperature variations [Paper]. IGSHPA Research Track, Stockholm, Sweden (9 pages). External link
Cimmino, M. (2018, May). pygfunction: an open-source toolbox for the evaluation of thermal response factors for geothermal borehole fields [Paper]. 10th Conference of IBPSA-Canada (eSIM 2018), Montréal, Qc, Canada. External link
Clement, J., Raison, M., & Rouleau, D. M. (2018). Reproducibility analysis of upper limbs reachable workspace, and effects of acquisition protocol, sex and hand dominancy. Journal of Biomechanics, 68, 58-64. External link
Cobetto, N., Aubin, C.-É., & Parent, S. (2018). Surgical Planning and Follow-up of Anterior Vertebral Body Growth Modulation in Pediatric Idiopathic Scoliosis Using a Patient-Specific Finite Element Model Integrating Growth Modulation. Spine Deformity, 6(4), 344-350. External link
Cobetto, N., Parent, S., & Aubin, C.-É. (2018). 3D correction over 2 years with anterior vertebral body growth modulation: A finite element analysis of screw positioning, cable tensioning and postoperative functional activities. Clinical Biomechanics, 51, 26-33. External link
Cossin, M., Ross, A., & Gosselin, F. (2018). Repeatability of force signals in aerial circus straps. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, 232(3), 225-235. External link
Coulon, P., Chatelain, J.-F., Dubé, M., & Rimpault, X. (2018, June). Effect of curing pressure on machinability of carbon fiber composite [Paper]. 8th CIRP Conference on High Performance Cutting (HPC 2018), Budapest, Hungary. Published in Procedia CIRP, 77. Available
Courtois, A. (2018). 3D Interlock Composites Multi-Scale Viscoelastic Model Development, Characterization and Modeling [Ph.D. thesis, École Polytechnique de Montréal]. Available
Courtois, A., Hirsekorn, M., Benavente, M., Jaillon, A., Marcin, L., Ruiz, E., & Lévesque, M. (2018). Viscoelastic behavior of an epoxy resin during cure below the glass transition temperature: Characterization and modeling. Journal of Composite Materials, 53(2), 155-171. External link
D'Avignon, K., & Kummert, M. (2018). Modeling horizontal storage tanks with encapsulated phase change materials for building performance simulation. Science and Technology for the Built Environment, 24(4), 327-342. External link
de Lima, L. A. P., Raison, M., Achiche, S., & de Lucas, R. D. (2018). Second order modeling for the pulmonary oxygen uptake on-kinetics: a comprehensive solution for overshooting and non-overshooting responses to exercise. Journal of Applied Physiology, 125(4), 1315-1328. External link
de Pannemaecker, A., Fouvry, S., Buffiere, J. Y., & Brochu, M. (2018). Modelling the fretting fatigue crack growth: From short crack correction strategies to microstructural approaches. International Journal of Fatigue, 117, 75-89. External link
Dejour, Q. (2018). Évaluation de la performance d'un compresseur contra-rotatif à écoulement mixte [Master's thesis, École Polytechnique de Montréal]. Available
Dejour, Q., & Vo, H. D. (2018, June). Assessment of a novel non-axial counter-rotating compressor concept for aero-engines [Paper]. ASME Turbo Expo 2018 : Turbomachinery Technical Conference and Exposition (GT 2018), Oslo, Norway (9 pages). External link
Delcroix, B., Kummert, M., & Daoud, A. (2018). Modeling phase change materials heat capacity using artificial neural networks. Heat Transfer Research, 49(7), 617-631. External link
Delikaris, A., Wang, X., Boyer, L., Larson, A. N., Ledonio, C. G. T., & Aubin, C.-É. (2018). Implant density at the apex is more important than overall implant density for 3D correction in thoracic adolescent idiopathic scoliosis using rod derotation and en bloc vertebral derotation technique. Spine, 43(11), E639-E647. External link
Demers, V., Fareh, F., Turenne, S., Demarquette, N. R., & Scalzo, O. (2018). Experimental study on moldability and segregation of Inconel 718 feedstocks used in low-pressure powder injection molding. Advanced Powder Technology, 29(1), 180-190. External link
Di Labbio, G., Vétel, J., & Kadem, L. (2018). Material transport in the left ventricle with aortic valve regurgitation. Physical Review Fluids, 3(11), 29 pages. External link
Di Labbio, G., Vétel, J., & Kadem, L. (2018, November). P0006: Hearts on Fire [Poster]. 71th Annual Meeting of the APS Division of Fluid Dynamics - Gallery of Fluid Motion, Atlanta, Georgia (1 page). Available
Diehl, P., Delorme, R., Tabiai, I., & Lévesque, M. (2018, June). Extracting constitutive mechanical parameters in linear elasticity using the virtual fields method within the ordinary state-based peridynamics framework [Presentation]. In 18th U.S. National Congress for Theoretical and Applied Mechanics, Chicago, USA. Unavailable
Diehl, P., Delorme, R., Tabiai, I., & Lévesque, M. (2018, May). Extracting constitutive mechanical parameters in linear elasticity using the virtual fields method within the ordinary state-based peridynamics framework [Presentation]. In Optimization Days 2018, Montréal, Canada. External link
Diehl, P., Prudhomme, S., & Lévesque, M. (2018, January). A review for benchmark experiments against peridynamic models [Presentation]. In Nonlocal Methods in Fracture, Austin, USA. Unavailable
Diehl, P., Tabiai, I., Baumann, F. W., Therriault, D., & Lévesque, M. (2018). Long term availability of raw experimental data in experimental fracture mechanics. Engineering Fracture Mechanics, 197, 21-26. External link
Dupuis, S., Fortin, C., Caouette, C., Leclair, I., & Aubin, C.-É. (2018). Global postural re-education in pediatric idiopathic scoliosis: a biomechanical modeling and analysis of curve reduction during active and assisted self-correction. BMC Musculoskeletal Disorders, 19(1). Available
Dupuy, F. (2018). Développement d'un outil de quantification et visualisation de la cinématique du genou [Master's thesis, École Polytechnique de Montréal]. Available
El Ouaaid, Z., Shirazi-Adl, A., & Plamondon, A. (2017, May). Trunk response and stability in standing under sagittal-symmetric pull-push forces at different orientations, elevations and magnitudes [Paper]. 2nd International Workshop on Spinal Loading and Deformation, Berlin, Germany. Published in Journal of Biomechanics, 70. External link
Emond, G. (2018). Stratégie de parallélisation hybride MPI/OPENMP pour EF, un programme d'analyse par éléments spectraux spécialisé pour la mécanique des fluides [Master's thesis, École Polytechnique de Montréal]. Available
Eskandari, B., Davoodi, B., & Ghorbani, H. (2018). Multi-objective optimization of parameters in turning of N-155 iron-nickel-base superalloy using gray relational analysis. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40(4), 12 pages. External link
Eslami Nejad, P., Badache, M., Corcoran, A., & Bernier, M. (2018, September). A virtual borehole for thermal response test unit calibration : test facility and concept development [Paper]. 2018 IGSHPA Research Track, Stockholm, Sweden (9 pages). External link
Étienne, S., Scolan, Y.-M., & Brosset, L. (2018, June). Numerical study of density ratio influence on global wave shapes before impact [Paper]. ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), Madrid, Spain. External link
Farahani, R. D., & Therriault, D. (2018, October). Advanced additive manufacturing of multifunctional composites [Paper]. Society of Engineering Science (SES 2018), Madrid, Spain. Unavailable
Farahani, R. D., Therriault, D., Dubé, M., Bodkhe, S., & Mahdavi, M. (2018). Additive Manufacturing of Multifunctional Nanocomposites and Composites II. In Beaumont, P. W. R., & Zweben, C. H. (eds.), Comprehensive Composite Materials II (pp. 380-407). External link
FarzanehKaloorazi, M. H., Bonev, I. A., & Birglen, L. (2018, August). Parameters identification of the path placement optimization problem for a redundant coordinated robotic workcell [Paper]. ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, (IDETC/CIE 2018), Québec, Québec. External link
FarzanehKaloorazi, M.H., Bonev, I. A., & Birglen, L. (2018). Simultaneous path placement and trajectory planning optimization for a redundant coordinated robotic workcell. Mechanism and Machine Theory, 130, 346-362. External link
Faucheux, P. A., Gosselin, F., & Lévesque, M. (2018). Simulating shot peen forming with Eigenstrains. Journal of Materials Processing Technology, 254, 135-144. Available
Fedorov, D., & Birglen, L. (2018). Differential noncircular pulleys for cable robots and static balancing. Journal of Mechanisms and Robotics, 10(6), 1-8. Available
Fedorov, D., & Birglen, L. (2018). Geometric optimization of a self-adaptive robotic leg. Transactions of the Canadian Society for Mechanical Engineering, 42(1), 49-60. Available
Fedorov, D., & Birglen, L. (2018, August). Kinematic and potential energy analysis of self-adaptive robotic legs [Paper]. ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC/CIE 2018), Québec, Québec. External link
Ferlisi, C. (2018). Rotor Wake Modelling Using the Vortex-Lattice Method [Master's thesis, École Polytechnique de Montréal]. Available
Fortier, V., Lessard, F., & Laberge Lebel, L. (2018, July). Fastening composite structures using carbon fiber/polyetherimide rivets [Paper]. 12th Canada-Japan Workshop on Composites, Design, Manufacturing and Applications of Composites (DMAC 2018), Takayama, Gifu, Japan. External link
Fortin, S., Étienne, S., Béguin, C., Pelletier, D., & Brosset, L. (2018, June). Numerical study of the influence of weber and reynolds numbers on the development of Kelvin-Helmholtz instability [Paper]. 28th International Ocean and Polar Engineering Conference (ISOPE 2018), Sapporo, Japan. External link
Fradet, L., Wang, X., Crandall, D., & Aubin, C.-É. (2018). Biomechanical Analysis of Acute Proximal Junctional Failure After Surgical Instrumentation of Adult Spinal Deformity: The Impact of Proximal Implant Type, Osteotomy Procedures, and Lumbar Lordosis Restoration. Spine Deformity, 6(5), 483-491. External link
Gagné-Boisvert, L., & Bernier, M. (2018). Integrated model for comparison of one- and two-pipe ground-coupled heat pump network configurations. Science and Technology for the Built Environment, 24(7), 726-742. Available
Gamache, J.-F., Vadean, A., & Achiche, S. (2018, August). Topology Optimization for the Design of Stiffened Panels for Wing Box [Paper]. Proceedings of Design Science Research 2018: Data-Driven Design and Learning, Montréal, Canada. Unavailable
Gamache, J.-F., Vadean, A., Noirot-Nérin, É., Beaini, D., & Achiche, S. (2018). Image-based truss recognition for density-based topology optimization approach. Structural and Multidisciplinary Optimization, 58(6), 2697-2709. External link
Garapin, J., Béguin, C., Étienne, S., Pelletier, D., & Molin, B. (2018). Non linear model of rotational galloping of square, rectangular and bundle cylinder in cross-flow. [Modélisation non-linéaire du galop en rotation pour des cylindres de sections carrées et rectangulaires]. Houille Blanche-Revue Internationale de l'Eau, 104(1), 11-17. External link
Gaudet, G., Raison, M., & Achiche, S. (2018). Classification of upper limb phantom movements in transhumeral amputees using electromyographic and kinematic features. Engineering Applications of Artificial Intelligence, 68, 153-164. External link
Gaudreau, J. (2018). Design and Validation of a Remote-Controlled Internal Lengthening Plate for Distraction Osteogenesis in Pediatric Patients [Master's thesis, École Polytechnique de Montréal]. Available
Gendreau, Y., Bélanger, M.-C., Lévesque, J., & Laberge Lebel, L. (2018, July). Effect of tailored fiber placement parameters on carbon fiber/epoxy composite [Paper]. 12th Canada-Japan Workshop on Composites, Design, Manufacturing and Applications of Composites (DMAC 2018), Takayama, Gifu, Japan. External link
Gervais, B., Vadean, A., Brochu, M., & Raison, M. (2018). Influence of the load modelling during gait on the stress distribution in a femoral implant. Multibody System Dynamics, 44(1), 93-105. External link
Ghaedsharaf, M., Brunel, J.-E., & Laberge Lebel, L. (2018, June). Thermoplastic Composite Rod Manufacturing using Biaxial Braid-Trusion [Paper]. 18th European Conference on Composite Materials (ECCM 2018), Athens, Greece (8 pages). Unavailable
Ghafoori Ahangar, R. (2018). Fatigue Behavior of Welded Joints with Partial Penetration [Ph.D. thesis, École Polytechnique de Montréal]. Available
Ghafoori Ahangar, R., & Verreman, Y. (2018). Assessment of Mode I and Mode II Stress Intensity Factors Obtained by Displacement Extrapolation and Interaction Integral Methods. Journal of Failure Analysis and Prevention, 19(1), 85-97. External link
Ghandali, P. (2018). A Pseudo-3D Ball Lattice Artifact and Method for Evaluating the Metrological Performance of Structured-Light 3D Scanners [Master's thesis, École Polytechnique de Montréal]. Available
Ghezelbash, F., El Ouaaid, Z., Shirazi-Adl, A., Plamondon, A., & Arjmand, N. (2017, May). Trunk musculoskeletal response in maximum voluntary exertions: A combined measurement-modeling investigation [Paper]. 2nd International Workshop on Spinal Loading and Deformation, Berlin, Germany. Published in Journal of Biomechanics, 70. External link
Ghezelbash, F., Eskandari, A. H., Shirazi-Adl, A., Arjmand, N., El-Ouaaid, Z., & Plamondon, A. (2017, May). Effects of motion segment simulation and joint positioning on spinal loads in trunk musculoskeletal models [Paper]. 2nd International Workshop on Spinal Loading and Deformation, Berlin, Germany. Published in Journal of Biomechanics, 70. External link
Ghezelbash, F., Shirazi-Adl, A., El Ouaaid, Z., Plamondon, A., & Arjmand, N. (2018, March). Subject-specific trunk musculoskeletal modeling: Characteristics, validation, and applications [Paper]. 15th International Symposium Computer Methods in Biomechanics and Biomedical Engineering and 3rd Conference on Imaging and Visualization (CMBBE 2018), Lisbon, Portugal (1 page). External link
Ghezelbash, F., Shirazi-Adl, A., Plamondon, A., & Arjmand, N. (2018, March). Subject-specific risk assessment of obesity and ageing in spine biomechanics [Paper]. 15th International Symposium Computer Methods in Biomechanics and Biomedical Engineering and 3rd Conference on Imaging and Visualization (CMBBE 2018), Lisbon, Portugal. External link
Gnessougou, S.-O., Poulin, N., Castanedo, C. I., Maldague, X., Champlain, A. , & Robert, É. (2018, June). Thermal diffusivity measurements with flash method at different depths in a burned composite material [Paper]. 14th Quantitative InfraRed Thermography Conference, Berlin, Germany. External link
Gritsch, L., Motta, F. L., Contessi Negrini, N., Yahia, L., & Fare, S. (2018). Crosslinked gelatin hydrogels as carriers for controlled heparin release. Materials Letters, 228, 375-378. External link
Habibi, M., Ruiz, E., Lebrun, G., & Laperrière, L. (2018). Effect of surface density and fiber length on the porosity and permeability of nonwoven flax reinforcement. Textile Research Journal, 88(15), 1776-1787. External link
Hasan, A., Byambaa, B., Morshed, M., Cheikh, M. I., Shakoor, R. A., Mustafy, T., & Marei, H. E. (2018). Advances in osteobiologic materials for bone substitutes. Journal of Tissue Engineering and Regenerative Medicine, 12(6), 1448-1468. External link
Hébert, A. (2018). Application of Tone's and embedded self-shielding methods to pressurized water reactor assemblies. Annals of Nuclear Energy, 112, 439-449. External link
Hébert, A. (2018). Équations de Lagrange. In Meriam, J. L., Kraige, L. G., & Bolton, J. N. (eds.), Mécanique de l'ingénieur : Dynamique (8th ed.). External link
Hébert, A. (2018, April). An investigation of distributed self-shielding effects with the Tone's method [Paper]. Physics of Reactors Conference: Reactor Physics Paving The Way Towards More Efficient Systems (PHYSOR 2018), Cancun, Mexico. Unavailable
Hébert, A., & Fede, L. (2018, September). A simplified space-time multiphysics mdoel for the Cabri core [Paper]. 4th International Conference on Physics and Technology of Reactors and Applications (PHYTRA 4), Marrakech, Morocco. Unavailable
Henao, J., Labelle, H., Arnoux, P.-J., & Aubin, C.-É. (2018). Biomechanical simulation of stresses and strains exerted on the spinal cord and nerves during scoliosis correction maneuvers. Spine Deformity, 6(1), 12-19. External link
Hilal, S. (2018). Caractérisation par microtomographie de la mésostructure des renforts fibreux pour la fabrication de composites [Master's thesis, École Polytechnique de Montréal]. Available
Ho, M. (2018). Calcul de la perméabilité en régime raréfié au travers de milieux poreux à l'aide de la méthode de Boltzmann sur réseau [Master's thesis, École Polytechnique de Montréal]. Available
Hosseini-Hashemi, S., Sepahi-Boroujeni, A., & Sepahi-Boroujeni, S. (2018). Analytical and molecular dynamics studies on the impact loading of single-layered graphene sheet by fullerene. Applied Surface Science, 437, 366-374. External link
Hubert, P., Dano, M.-L., Vadean, A., & Li, C. (2018). Development of new repair technologies for out-of-autoclave aircraft composite components. (Technical Report n° STO-MP-AVT-266). Unavailable
Il, A., Chatelain, J.-F., Lalonde, J.-F., Balazinski, M., & Rimpault, X. (2018). An experimental investigation of the influence of cutting parameters on workpiece internal temperature during Al2024-T3 milling. International Journal of Advanced Manufacturing Technology, 97(1-4), 413-426. External link
Ingremeau, J.-J., Taforeau, J., Tixier, G., & Hébert, A. (2018, September). Impact of the Samarium depletion chain modeling in a PWR equilibrium cycle using DRAGON and DONJON [Paper]. 4th International Conference on Physics and Technology of Reactors and Applications (PHYTRA 4), Marrakech, Morocco. Unavailable
Jadidi, M., Trépanier, J.-Y., Farzad, M. A., & Dolatabadi, A. (2018, July). Effects of ambient air relative humidity and surface temperature on water droplet spreading dynamics [Paper]. 5th ASME Joint US-European Fluids Engineering Division Summer Meeting (FEDSM 2018), Montréal, Québec. External link
Jamati, F. (2018). Analogy between vortex waves and EM waves. Fluid Dynamics Research, 50(6), 065511 (12 pages). External link
Jamshidi, M. (2018). Tool Wear Monitoring Based on Fractal Analysis of Cutting Force Signals While Machining Titanium Alloy Within CFRP/Titanium Stack [Master's thesis, École Polytechnique de Montréal]. Available
Javadi, H., Jomaa, W., Dalgaard, E., Brochu, M., & Bocher, P. (2018, May). Influence of surface residual stresses on the fatigue life and crack propagation behavior of turned Inconel 718 super-alloy [Paper]. 12th International Fatigue Congress (FATIGUE 2018), Poitiers, France (6 pages). Published in MATEC Web of Conferences, 165. Available
Jha, R., Chablat, D., & Baron, L. (2017, May). Influence of design parameters on the singularities and workspace of a 3-RPS parallel robot [Paper]. CCToMM Symposium on Mechanics, Machines, and Mechatronics, Montréal, Canada. Published in Transactions of the Canadian Society for Mechanical Engineering, 42(1). External link
Jha, R., Chablat, D., Baron, L., Rouillier, F., & Moroz, G. (2018). Workspace, joint space and singularities of a family of delta-like robot. Mechanism and Machine Theory, 127, 73-95. External link
Kadem, S., Lachemet, A., & Younsi, R. (2018). Computational Analysis of Heat and Mass Transfer During Torrefaction of Softwood Timber: a Dimensionless Analysis. International Journal on Engineering Applications (IREA), 6(3). External link
Kamalizadeh, S., Niknam, S. A., Asgari, A., & Balazinski, M. (2018). Tool wear characterization in high-speed milling of titanium metal matrix composites. International Journal of Advanced Manufacturing Technology, 100(9-12), 2901-2913. External link
Kaviani, R., Londono, I., Parent, S., Moldovan, F., & Villemure, I. (2018). Changes in growth plate extracellular matrix composition and biomechanics following in vitro static versus dynamic mechanical modulation. Journal of Musculoskeletal & Neuronal Interactions, 18(1), 81-91. External link
Keshavarz, M. K., Turenne, S., & Bonakdar, A. (2018). Solidification behavior of inconel 713LC gas turbine blades during electron beam welding. Journal of Manufacturing Processes, 31, 232-239. External link
Khameneifar, F., & Ghorbani, H. (2018, July). Estimating principal curvatures in noisy point clouds through local quadric surface fitting [Paper]. 15th Annual International CAD Conference (CAD 2018), Paris, France. External link
Khoddam-Khorasani, P., Arjmand, N., & Shirazi-Adl, A. (2018). Trunk hybrid passive-active musculoskeletal modeling to determine the detailed T12-S1 response under in vivo loads. Annals of Biomedical Engineering, 46(11), 1830-1843. External link
Kidikian, J., & Reggio, M. (2018, June). Off-design prediction of transonic axial compressors, Part 1: Mean-line code and tuning factors [Paper]. ASME Turbo Expo 2018 : Turbomachinery Technical Conference and Exposition (GT 2018), Oslo, Norway (16 pages). External link
Kidikian, J., & Reggio, M. (2018, June). Off-design prediction of transonic axial compressors, Part 2 : Generalized mean-line loss modelling methodology [Paper]. ASME Turbo Expo 2018 : Turbomachinery Technical Conference and Exposition (GT 2018), Oslo, Norway (16 pages). External link
Klotz, T. (2018). Analytical Prediction of Shot Peening Effects on Nickel-Based Superalloy Inconel 718 Fatigue Life [Ph.D. thesis, École Polytechnique de Montréal]. Available
Klotz, T., Delbergue, D., Bocher, P., Lévesque, M., & Brochu, M. (2018). Surface characteristics and fatigue behavior of shot peened Inconel 718. International Journal of Fatigue, 110, 10-21. External link
Klotz, T., Miao, H. Y., Bianchetti, C., Lévesque, M., & Brochu, M. (2018). Analytical fatigue life prediction of shot peened Inconel 718. International Journal of Fatigue, 113, 204-221. External link
Kong, X.-Z., Parmigiani, A., Di Palma, P., Leclaire, S., & Saar, M. O. (2018, November). Dynamics of phase exsolution in porous media [Abstract]. 16th Swiss Geoscience Meeting, Bern, Switzerland. External link
Laberge Lebel, L., & Fortier, V. (2018). Apparatus and methods for installing composite rivets. (Patent no. WO3592538). External link
Laberge Lebel, L., & Nakai, A. (eds.) (2018). Design, manufacturing and applications of composites : proceedings of the 12th Canada-Japan Workshop on Composites, July 4-7, 2018, Takayama, Gifu, Japan. External link
Laferrière, A., & Cimmino, M. (2018, September). Model predictive control applied to residential self-assisted ground source heat pump [Paper]. 2018 IGSHPA Research Track, Stockholm, Sweden. External link
Laine, J., Piollet, E., & Batailly, A. (2018, June). Towards the structural optimization of bladed components featuring contact interfaces [Paper]. ASME Turbo Expo 2018 : Turbomachinery Technical Conference and Exposition (GT 2018), Oslo, Norway (13 pages). External link
Lakis, A. A., & Oulmane, A. (2018). Nonuniform shell/flow vibration analysis for a nuclear plant. European Journal of Mathematics and Computer Science, 5(1), 93-145. External link
Lakis, A. A., Mahvash, A., & Toorani, M. (2018, July). Diagnosis of bearing faults in complex machinery using spatial distribution of sensors and Fourier transforms [Paper]. 6th International Conference on Integrity-Reliability-Failure (IRF 2018), Lisbon, Portugal. External link
Lamarche-Gagnon, M. E., & Vétel, J. (2018). An inverse problem to assess the two-component unsteady wall shear rate. International Journal of Thermal Sciences, 130, 278-288. External link
Lamarche-Gagnon, M.-É. (2018). Développement de la méthode électrodiffusionnelle pour la mesure instantanée des deux composantes du frottement pariétal [Ph.D. thesis, École Polytechnique de Montréal]. Available
Lamarche-Gagnon, M.-É., & Vétel, J. (2018). Experimental investigation of unsteady separation in the rotor-oscillator flow. Journal of Fluid Mechanics, 844, 546-566. External link
Lamarche-Gagnon, M.-É., Sobolík, V., & Vétel, J. (2018). Diagnostics of the fluctuating wall shear rate components using an uncalibrated three-segment electrodiffusion sensor. Experiments in Fluids, 59(11). External link
Larouche Guilbert, M. (2018). Quantification des efforts intervertébraux et articulaires en temps-réel au cours de la marche des enfants atteints de scoliose idiopathique [Master's thesis, École Polytechnique de Montréal]. Available
Lashkajani, K. H., Laurendeau, É., Castonguay, P., & Leblond, D. (2017, June). Framework of Multiblock Structured Grid Smoothing Algorithms for Aircraft Configurations [Paper]. 23rd AIAA Computational Fluid Dynamics Conference / AIAA Aviation and Aeronautics Forum and Exposition, Denver, CO. Published in Journal of Aircraft, 55(4). External link
Lavoie, P., Bourgault-Côté, S., & Laurendeau, É. (2018). Numerical algorithms for infinite swept wing ice accretion. Computers & Fluids, 161, 189-198. External link
Lavoie, P., Pena, D., Hoarau, Y., & Laurendeau, É. (2018). Comparison of thermodynamic models for ice accretion on airfoils. International Journal of Numerical Methods for Heat and Fluid Flow, 28(5), 1004-1030. External link
Lebel, L., Boukhili, R., & Turenne, S. (2018). Damage to an A-N720 ceramic matrix composite under simulated gas turbine static component conditions using laser heating. Journal of Composite Materials, 52(30), 4127-4138. External link
Leclaire, S., Latt, J., Vidal, D., & Bertrand, F. (2018). Multiphase periodic pressure difference boundary condition enhanced by a proportional-integral-derivative controller for the lattice Boltzmann method. International Journal for Numerical Methods in Fluids, 88(9), 434-446. External link
Leclaire, S., Vidal, D., Fradette, L., & Bertrand, F. (2018, June). Lattice Boltzmann modeling of immiscible liquid-liquid flows in static mixers [Paper]. North American Mixing Forum (Mixing XXVI), San Juan, Puerto Rico. Unavailable
Letellier-Duchesne, S., Nagpal, S., Kummert, M., & Reinhart, C. (2018). Balancing demand and supply: Linking neighborhood-level building load calculations with detailed district energy network analysis models. Energy, 150, 913-925. External link
Li, P. L. (2018). Modélisation multicorps du membre supérieur. (Internship Report - Graduate Studies). Available
Lonca, G., Muggéo, R., Tétreault-Imbeault, H., Bernard, S., & Margni, M. (2018). A bi-dimensional assessment to measure the performance of circular economy: A case study of tires end-of-life management. In Benetto, E., Gericke, K., & Guiton, M. (eds.), Designing Sustainable Technologies, Products and Policies (pp. 33-42). Available
Lopez Poncelas, M., Aubin, C.-É., Wang, X., & Crandall, D. G. (2018, November). Biomechanical Analysis of Proximal Junctional Failure for Different Proximal Fixations of the Spine [Paper]. 48e Réunion annuelle de la Société de scoliose du Québec, Bromont, Québec, Canada. Unavailable
Lortie, S. (2018). Simulation d'écoulements à surface libre entre un liquide et un gaz compressible [Master's thesis, École Polytechnique de Montréal]. Available
Los, A., & Mayer, J. R. R. (2018). Application of the adaptive Monte Carlo method in a five-axis machine tool calibration uncertainty estimation including the thermal behavior. Precision Engineering, 53, 17-25. External link
Ma, Y. (2018). Design conceptuel d'un incubateur pour un nanosatellite en combinant la conception axiomatique et un index unifié de performance mécatronique (MMP) [Master's thesis, École Polytechnique de Montréal]. Available
Machairas, T., Kontogiannis, A., Karakalas, A., Solomou, A., Riziotis, V. A., & Saravanos, D. A. (2018). Robust fluid-structure interaction analysis of an adaptive airfoil using shape memory alloy actuators. Smart Materials and Structures, 27(10), 16 pages. External link
Madra, A., Breitkopf, P., Raghavan, B., & Trochu, F. (2018). Diffuse manifold learning of the geometry of woven reinforcements in composites. Comptes Rendus Mécanique, 346(7), 532-538. External link
Marleau, G., & Hébert, A. (2018, October). DRAGON5 Workshop [Paper]. 8th International Conference on Simulation Methods in Nuclear Science and Engineering (8ICSMNSE), Ottawa, ON. Unavailable
Marouane, H., Shirazi-Adl, A., & Sharifi, M. (2018, March). Larger flexion rotations in gait reduce muscle, tibiofemoral contact and anterior cruciate ligament forces [Paper]. ORS 2018 Annual Meeting, New Orleans, Louisiana. External link
Mascle, C. (2018, September). Product end-of-life problem in the context of reverse supply chain analysis [Paper]. 10th International Conference on Sustainable Development and Planning, Sienna, Italy. External link
Mazaheri, A. (2018). Numerical Simulation of Radiative Heat Transfer in a High Voltage Circuit Breaker [Master's thesis, École Polytechnique de Montréal]. Available
McDowell, T. P., Letellier-Duchesne, S., & Kummert, M. (2018, September). A New Method For Determining Sub-Hourly Solar Radiation From Hourly Data [Paper]. 2018 Building Performance Analysis Conference and Simbuild, Chicago, IL. External link
Mohammadian, N., Turenne, S., & Brailovski, V. (2018). Surface finish control of additively-manufactured Inconel 625 components using combined chemical-abrasive flow polishing. Journal of Materials Processing Technology, 252, 728-738. External link
Mohebbi, A., Achiche, S., & Baron, L. (2018, August). Data-driven approaches in multi-criteria decision support for mechatronic systems design [Presentation]. In DSR Workshop on Data Driven Design and Learning, Montréal, Québec. Unavailable
Mohebbi, A., Achiche, S., & Baron, L. (2018). Multi-criteria fuzzy decision support for conceptual evaluation in design of mechatronic systems: a quadrotor design case study. Research in Engineering Design, 29(3), 329-349. External link
Mortazavinia, Z. (2018). Two-Way Fluid-Structure Coupling Methodology for Modeling 3D Flexible Hydrofoils in Viscous Flow [Ph.D. thesis, École Polytechnique de Montréal]. Available
Mortazavinia, Z., Camarero, R., & Guibault, F. (2018). Three-dimensional Analysis of Two-way Fluid-structure Interaction on a Flexible Hydrofoil in Viscous Flow. International Journal of Fluid Machinery and Systems, 11(3), 333-343. External link
Mosser, P. (2018). Caractérisation microstructurale et mécanique d'aciers à haute résistance sujets à la galvanisation continue [Master's thesis, École Polytechnique de Montréal]. Available
Mouazé, N., & Birglen, L. (2018, August). Deformation Analysis of a Compliant Underactuated Finger Grasping a Soft Object [Paper]. ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Québec, Québec. External link
Muller, É., Pelletier, D., & Garon, A. (2018, January). Adaptive meshing and time-integrators for monolithic finite element solution of the URANS equations [Paper]. AIAA Aerospace Sciences Meeting, Reston, VA, USA (25 pages). External link
Mustafy, T., Arnoux, P.-J., Benoit, A., Bianco, R.-J., Aubin, C.-É., & Villemure, I. (2018). Load-sharing biomechanics at the thoracolumbar junction under dynamic loadings are modified by anatomical features in adolescent and pediatric vs adult functional spinal units. Journal of the Mechanical Behavior of Biomedical Materials, 88, 78-91. External link
Mustafy, T., Benoit, A., Londono, I., Moldovan, F., & Villemure, I. (2018). Can repeated in vivo micro-CT irradiation during adolescence alter bone microstructure, histomorphometry and longitudinal growth in a rodent model? PLOS One, 13(11), e0207323. Available
Mustafy, T., Londono, I., & Villemure, I. (2018). Can the contralateral limb be used as a control during the growing period in a rodent model? Medical Engineering and Physics, 58, 31-40. External link
Nabatian, N., & Mureithi, N. W. (2018). Bifurcation and stability analysis with the role of normal form symmetries on the harmonic streamwise forced oscillation of the cylinder wake. European Journal of Mechanics, B/Fluids, 70, 115-129. External link
Naserkhaki, S., Arjmand, N., Shirazi-Adl, A., Farahmand, F., & El-Rich, M. (2017, May). Effects of eight different ligament property datasets on biomechanics of a lumbar L4-L5 finite element model [Paper]. 2nd International Workshop on Spinal Loading and Deformation, Berlin, Germany. Published in Journal of Biomechanics, 70. External link
Neale, A., Kummert, M., & Bernier, M. (2018, May). Generator : A stochastic virtual smart meter data generation model for residential building stock characterization [Paper]. Building Performance Simulation Conference (eSim 2018), Montréal, Québec. External link
Ngapanoun Ebah, K., & Koalaga, S. R. (2018). Rapport UPIR session 2017-2018 sur l'application du knowledge based engineering. (Study Report - Graduate Studies). Available
Nguyen, M. T., Castonguay, P., & Laurendeau, É. (2018, July). GPUs accelerated three-dimensional RANS solver for aerodynamic simulations on multiblock grids [Paper]. 10th International Conference on Computational Fluid Dynamics (ICCFDU 2018), Barcelona, Spain. External link
Nguyen, R. P. T. (2018). Études sur les jets à contre-courant [Master's thesis, École Polytechnique de Montréal]. Available
Niknam, H., Akbarzadeh, A. H., Rodrigue, D., & Therriault, D. (2018). Architected multi-directional functionally graded cellular plates. Materials and Design, 148, 188-202. External link
Niknam, S. A., Kamalizadeh, S., Asgari, A., & Balazinski, M. (2018). Turning titanium metal matrix composites (Ti-MMCs) with carbide and CBN inserts. International Journal of Advanced Manufacturing Technology, 97(1-4), 253-265. External link
Niknam, S. A., Kouam, J., Songméné, V., & Balazinski, M. (2018). Dry and semi-dry turning of titanium metal matrix composites (Ti-MMCs). Procedia CIRP, 77, 62-65. Available
Noriega, H., Guibault, F., Reggio, M., & Magnan, R. (2018). A case-study in open-source CFD code verification, Part I: Convergence rate loss diagnosis. Mathematics and Computers in Simulation, 147, 152-171. External link
Noriega, H., Guibault, F., Reggio, M., & Magnan, R. (2018). A case-study in open-source CFD code verification. Part II: Boundary condition non-orthogonal correction. Mathematics and Computers in Simulation, 147, 172-193. External link
Nyssen, F., & Batailly, A. (2018, June). Thermo-mechanical modeling of abradable coating wear in aircraft engines [Paper]. ASME Turbo Expo 2018 : Turbomachinery Technical Conference and Exposition (GT 2018), Oslo, Norway. External link
Olala, S., & Mureithi, N. W. (2018, July). A quasi-steady in-plane fluidelastic instability analysis of a rotated triangular tube array in two-phase cross flow [Paper]. ASME 2018 Pressure Vessels and Piping Conference (PVP 2018), Prague, Czech republic (9 pages). External link
Ortensi, J., Wang, Y., Laurier, A., Schunert, S., Hébert, A., & DeHart, M. (2018). A Newton solution for the superhomogenization method: The PJFNK-SPH. Annals of Nuclear Energy, 111, 579-594. Available
Ouadday, R. (2018). Caractérisation mécanique des structures sandwichs utilisées comme extension d'avant-directrices des turbines hydroélectriques [Ph.D. thesis, École Polytechnique de Montréal]. Available
Ouadday, R., Marouene, A., Morada, G., Kaabi, A., Boukhili, R., & Vadean, A. (2018). Experimental and numerical investigation on the impact behavior of dual-core composite sandwich panels designed for hydraulic turbine applications. Composite Structures, 185, 254-263. External link
Paraschivoiu, I., Ammar, S., & Saeed, F. (2018). VAWT vs HAWT : a comparative performance study of 2-6 MW rated capacity turbines. Transactions of the Canadian Society for Mechanical Engineering, 42(4), 393-403. External link
Paraschivoiu, I., Shams, S., & Dy, N. V. (2018). Performance Assessment of Darrieus Wind Turbines with Symmetric and Cambered Airfoils. Transactions of the Canadian Society for Mechanical Engineering, 42(4), 382-392. External link
Parenteau, M., & Laurendeau, É. (2018). Nonlinear frequency-domain solver for vortex lattice method. AIAA Journal, 56(6), 2242-2251. External link
Parenteau, M., Laurendeau, É., & Carrier, G. (2018). Combined high-speed and high-lift wing aerodynamic optimization using a coupled VLM-2.5D RANS approach. Aerospace Science and Technology, 76, 484-496. External link
Parenteau, M., Sermeus, K., & Laurendeau, É. (2018, January). VLM coupled with 2.5D RANS sectional data for high-lift design [Paper]. AIAA Aerospace Sciences Meeting, Kissimmee, Florida. External link
Pea, R., Dansereau, J., Caouette, C., Cobetto, N., & Aubin, C.-É. (2018). Computer-assisted design and finite element simulation of braces for the treatment of adolescent idiopathic scoliosis using a coronal plane radiograph and surface topography. Clinical Biomechanics, 54, 86-91. External link
Petro, E. (2018). Optimisation d'une aile d'avion par la méthode de décomposition de la traînée [Master's thesis, École Polytechnique de Montréal]. Available
Picard-Krashevski, G. (2018). Optimisation des algorithmes de planification et d'évitement d'obstacle d'un bras robotique. (Internship Report - Graduate Studies). Available
Pichon, H. (2018). Outils de conception pour barrières acoustiques multicouches [Master's thesis, École Polytechnique de Montréal]. Available
Plante, F., & Laurendeau, É. (2018). Acceleration of Euler and RANS solvers via Selective Frequency Damping. Computers & Fluids, 166, 46-56. External link
Plante, F., & Laurendeau, É. (2018). Simulation of Transonic Buffet Using a Time-Spectral Method. AIAA Journal, 57(3), 1275-1287. External link
Plante, F., Dandois, J., & Laurendeau, É. (2018, September). ZDES and URANS Simulations of 3D Transonic Buffet Over Infinite Swept Wings [Paper]. 7th Symposium on Hybrid RANS-LES Methods, Berlin, Germany. External link
Pouliot Laforte, L. (2018). Évaluation de la dégradation thermique de structures en composites assemblées par rivetage à haute température [Master's thesis, École Polytechnique de Montréal]. Available
Pouliot Laforte, L., & Laberge Lebel, L. (2018). Thermal analysis and degradation of properties in carbon fiber/epoxy laminate riveting at high temperatures. Polymer Testing, 67, 205-212. External link
Provencher, P. R., & Balazinski, M. (2018). Principal component idealizations of the dominant modes of variability in the mechanics of the cutting process in metal turning. International Journal of Advanced Manufacturing Technology, 95(5-8), 1665-1676. External link
Raison, M., Verlé, A., Abedrabbo, G., Detrembleur, C., Mahaudens, P., & Fisette, P. (2018, June). Customized MBD models to contribute answering clinical questions about the spine [Paper]. 5th Joint International Conference on Multibody System Dynamics, Lisbon, Portugal. External link
Rajesh, P. S. M., Sirois, F., & Therriault, D. (2018). Damage response of composites coated with conducting materials subjected to emulated lightning strikes. Materials and Design, 139, 45-55. External link
Ramananarivo, M. (2018). Conception et fabrication d'une prothèse myoéléctrique biofidèle pour amputés huméraux [Master's thesis, École Polytechnique de Montréal]. Available
Ramirez Uribe, A. G. (2018). Design of a Mechatronic System for the Characterization of Polymer Composite Material Properties During Molding Processes [Ph.D. thesis, École Polytechnique de Montréal]. Available
Raouafi, S., Achiche, S., & Raison, M. (2018). Socioeconomic disparities and difficulties to access to healthcare services among Canadian children with neurodevelopmental disorders and disabilities. Epidemiology Health, 40, e2018010 (10 pages). Available
Rimpault, X., Balazinski, M., & Chatelain, J.-F. (2018). Fractal analysis application outlook for improving process monitoring and machine maintenance in manufacturing 4.0. Journal of Manufacturing and Materials Processing, 2(3), 62 (7 pages). Available
Rimpault, X., Bitar-Nehme, E., Balazinski, M., & Mayer, J. R. R. (2018). Online monitoring and failure detection of capacitive displacement sensor in a Capball device using fractal analysis. Measurement: Journal of the International Measurement Confederation, 118, 23-28. External link
Rimpault, X., Il, A., Chatelain, J.-F., Lalonde, J.-F., & Balazinski, M. (2018). Workpiece subsurface temperature study during aluminum skin milling in slotting and ramping. Procedia CIRP, 77, 417-420. Available
Rohart, V., Dube, M., & Laberge Lebel, L. (2018, May). Effects of temperature on the apparent lap shear strength of resistance-welded carbon fibre/thermoplastic composite joints [Paper]. Conference and Exhibition (SAMPE 2018), Long Beach, CA. Unavailable
Ruiz, E., Pupin, C., Ross, A., Dubois, C., & Rietsch, J. C. (2018, October). Solving porosity growth during composite manufacturing [Paper]. 5th Annual Composites and Advanced Materials Expo (CAMX 2018), Dallas, TX, United states. External link
Sarcher, A., Brochard, S., Hug, F., Letellier, G., Raison, M., Perrouin-Verbe, B., Sangeux, M., & Gross, R. (2018). Patterns of upper limb muscle activation in children with unilateral spastic cerebral palsy: Variability and detection of deviations. Clinical Biomechanics, 59, 85-93. External link
Scheiffer, Y. (2018). Comparaison de résolutions elliptiques entre la méthode des frontières immergées et la méthode des volumes finis [Master's thesis, École Polytechnique de Montréal]. Available
Schmidt, H., & Shirazi-Adl, A. (2018). Temporal and spatial variations of pressure within intervertebral disc nuclei. Journal of the Mechanical Behavior of Biomedical Materials, 79, 309-313. External link
Schmidt, H., Shirazi-Adl, A., Arjman, N., & Dreischarf, M. (2018, March). Estimation of loads on human lumbar spine - a critical review of past in vivo and computational model studies [Paper]. 15th International Symposium Computer Methods in Biomechanics and Biomedical Engineering and 3rd Conference on Imaging and Visualization (CMBBE 2018), Lisbon, Portugal. Unavailable
Scola, A., Eberling-Fux, N., Turenne, S., & Ruiz, E. (2018). New liquid processing of oxide/oxide 3D wowen ceramic matrix composites. Journal of the American Ceramic Society, 102(6), 3256-3268. External link
Scola, A., Podgorski, M., Eberling-Fux, N., Turenne, S., & Ruiz, E. (2018). Novel device for in situ process characterization of oxide/oxide ceramic matrix composites fabricated by flexible injection. Journal of the American Ceramic Society, 102(5), 2337-2352. External link
Scola, A.-D. (2018). Étude du procédé d'injection flexible pour le moulage par voie liquide de composites à matrice céramique oxyde/oxyde [Ph.D. thesis, École Polytechnique de Montréal]. Available
Serra, M., Vétel, J., & Haller, G. (2018). Exact theory of material spike formation in flow separation. Journal of Fluid Mechanics, 845, 51-92. External link
Sharifi, M., Shirazi-Adl, A., & Marouane, H. (2018). Computation of the role of kinetics, kinematics, posterior tibial slope and muscle cocontraction on the stability of ACL-deficient knee joint at heel strike Towards identification of copers from non-copers. Journal of Biomechanics, 77, 171-182. External link
Sharifi, M., Shirazi-Adl, A., & Marouane, H. (2018, March). A computational lower-extremity model to quantify the stability of an anterior cruciate ligament deficient knee joint at heel strike: Gait parameters marking copers from non-copers [Paper]. 15th International Symposium Computer Methods in Biomechanics and Biomedical Engineering and 3rd Conference on Imaging and Visualization (CMBBE 2018), Lisbon, Portugal. External link
Sharifi, M., Shirazi-Adl, A., & Marouane, H. (2018, March). Stability of ACL deficient knee joint at heel strike is governed by sagittal rotation-moment and cocontraction -Identification of gait parameters in copers and non-copers [Paper]. ORS 2018 Annual Meeting, New Orleans, Louisiana. External link
Sokolowski, W., Chirani, N., & Yahia, L. (2018). CHEM Biomedical Applications. In Sokolowski, W. (ed.), Cold Hibernated Elastic Memory Structure: Self-Deployable Technology and Its Applications (pp. 335-344). External link
Sokolowski, W., Chirani, N., & Yahia, L. (2018). CHEM for endovascular interventions of aneurysm. In Sokolowski, W. (ed.), Cold Hibernated Elastic Memory Structure: Self-Deployable Technology and Its Applications . External link
Somveille, Q. (2018). Effect of Selective Oxidation on Temperature Measurements of AHSS with Pyrometry [Master's thesis, École Polytechnique de Montréal]. Available
Souleimani, Y., Vo, H. D., & Yu, H. (2018, June). Performance desensitization for a high-speed axial compressor [Paper]. ASME Turbo Expo 2018 : Turbomachinery Technical Conference and Exposition (GT 2018), Oslo, Norway (14 pages). External link
St-Onge, G. (2018). Variable Capacity Mini-Split Air Source Heat Pump Model for TRNSYS [Master's thesis, École Polytechnique de Montréal]. Available
St-Onge, G., Kummert, M., & Kegel, M. (2018, May). Variable capacity mini-split air source heat pump model for TRNSYS [Paper]. Building Performance Simulation Conference (eSim 2018), Montréal, Québec. External link
Sterba, M., Arnoux, P. J., Labelle, H., Warner, W. C., & Aubin, C.-É. (2018). Biomechanical analysis of spino-pelvic postural configurations in spondylolysis subjected to various sport-related dynamic loading conditions. European Spine Journal, 27(8), 2044-2052. External link
Stocco, T. (2018). Configuration de l'âme en nid d'abeille sur des réflecteurs d'antennes spatiales [Master's thesis, École Polytechnique de Montréal]. Available
Tabiai, I. (2018). 3D Full Field Displacement and Strain Measurements at the Microscale in Fiber Reinforced Composites Under Transverse Load Using Digital Image Correlation [Ph.D. thesis, École Polytechnique de Montréal]. Available
Tabiai, I., Delorme, R., Therriault, D., & Lévesque, M. (2018). In-situ Full Field Measurements During Inter-Facial Debonding in Single Fiber Composite Under Transverse Load. Experimental Mechanics, 58(9), 1451-1467. External link
Tenni, B. (2018). Étude expérimentale de l'effet du contenu inclusionnaire sur les propriétés mécaniques de résilience et de fatigue-propagation au seuil de soudures en acier 410 NIMO [Master's thesis, École Polytechnique de Montréal]. Available
Therriault, D. (2018, January). Advanced additive manufacturing of multifunctional composites [Paper]. Gordon Research Conference, Symposium on Multifunctional materials (GRC 2018), Ventura, United States. Unavailable
Therriault, D., & Chizari, K. (2018). Electrically conductive ink for solvent-cast 3D printing. (Patent Application no. US20180022023). External link
Tran, D. M., Nguyen, M. T., & Lee, S.-W. (2018, February). Machine learning based evaluation of functional index for coronary lesion severity [Paper]. 2nd International Conference on Machine Learning and Soft Computing (ICMLSC 2018), Phu Quoc Island, Viet nam (4 pages). External link
Tran, D. M., Nguyen, V. K., Nguyen, M. T., & Lee, S.-W. (2018). Numerical study on relationship between geometric features of stenotic lesion and hemodynamics-based diagnostic indices of coronary artery disease. Transactions of the Korean Society of Mechanical Engineers B, 42(7), 479-485. External link
Trochu, F., & Causse, P. (2018, May). Combined characterization of pose size distribution and permeability in fibrous textiles by capillary flow porometry [Paper]. 14th International Conference on Flow Processes in Composite Materials, Kulturens Hus in Luleå, Sweden. Unavailable
Tu, F., Delbergue, D., Klotz, T., Bag, A., Miao, H., Bianchetti, C., Brochu, M., Bocher, P., & Lévesque, M. (2018). Discrete element-periodic cell coupling model and investigations on shot stream expansion, Almen intensities and target materials. International Journal of Mechanical Sciences, 145, 353-366. External link
Uwamahoro, M. C., Massicotte, R., Hurtubise, Y., Gagné-Bourque, F., Mafu, A. A., & Yahia, L. (2018). Evaluating the sporicidal activity of disinfectants against Clostridium difficile and Bacillus amyloliquefaciens spores by using the improved methods based on ASTM E2197-11. Frontiers Public Health, 6, 18 (6 pages). Available
Vakili-Azghandi, M., Fattah-alhosseini, A., & Keshavarz, M. K. (2018). Optimizing the electrolyte chemistry parameters of PEO coating on 6061 Al alloy by corrosion rate measurement: Response surface methodology. Measurement: Journal of the International Measurement Confederation, 124, 252-259. External link
Vasilevskiy, D., Keshavarz, M. K., Simard, J.-M., Masut, R. A., Turenne, S., & Snyder, G. J. (2018). Assessing the thermal conductivity of Cu2xSe alloys undergoing a phase transition via the simultaneous measurement of thermoelectric parameters by a Harman-based setup. Journal of Electronic Materials, 47(6), 3314-3319. External link
Vasilevskiy, D., Masut, R. A., & Turenne, S. (2018). A Phenomenological Model of Unconventional Heat Transport Induced by Phase Transition in Cu2−xSe. Journal of Electronic Materials, 48(4), 1883-1888. External link
Vautrin, Y., Pelletier, D., & Garon, A. (2018, January). A continuous shape sensitivity equation method of arbitrary high order [Paper]. AIAA Aerospace Sciences Meeting, Kissimmee, Florida. External link
Velísková, P., Bashkuev, M., Shirazi-Adl, A., & Schmidt, H. (2017, May). Computational study of the role of fluid content and flow on the lumbar disc response in cyclic compression: Replication of in vitro and in vivo conditions [Paper]. 2nd International Workshop on Spinal Loading and Deformation, Berlin, Germany. Published in Journal of Biomechanics, 70. External link
Verdier, P. (2018). Caractérisation de composés thermoélectriques à base de Mg2Si extrudés à chaud [Master's thesis, École Polytechnique de Montréal]. Available
Verdier, P., Vasilevskiy, D., Turenne, S., & Masut, R. A. (2018). Microstructure and Thermoelectric Properties of Hot Extruded Sb-Doped Mg₂Si Using MoS₂ Nano-particles as Lubricant. Journal of Electronic Materials, 47(11), 6833-6841. External link
Vo, H. D., & Mureithi, N. W. (2018). Improving aircraft performance with plasma actuators. External link
Vo, M., Mehrabian, S., Villalpando, F., Étienne, S., Pelletier, D., & Cameron, C. B. (2018). The fluid dynamics of Balanus glandula barnacles: Adaptations to sheltered and exposed habitats. Journal of Biomechanics, 71, 225-235. External link
Vu, N. P., Duong, X. T., Ly, V. A., Nguyen, D. C., Tran, M. D., Phan, Q. T., Balazinski, M., Son, L. T., Zeb, G., & Le, X. T. (2018). Electroless nickel plating onto Plexiglas (R) through simple covalent grafting of vinylpyridine seed layer. Materials & Design, 144, 151-158. External link
Wang, X., Aubin, C.-É., & Rawlinson, J. (2018). Cross-link Torsional Stability for Posterior Fixation in Spinal Fusion Surgery – Phase 1. (Technical Report). Unavailable
Wang, X., Aubin, C.-É., & Rawlinson, J. (2018). Dual Construct in Adult Spinal Instrumentation Phase 1 – Biomechanical Analysis. (Technical Report). Unavailable
Wang, X., Aubin, C.-É., & Rawlinson, J. (2018). Multi-rod Constructs Biomechanical Analysis Phase 1: Characterization of Load Sharing. (Technical Report). Unavailable
Wang, X., Aubin, C.-É., & Rawlinson, J. (2018). Multi-rod Constructs Biomechanical Analysis Phase 2: Characterization of Load Sharing in Adult Instrumentation Involving PSO. (Technical Report). Unavailable
Wang, X., Yeung, K., Cheung, J. P. Y., Lau, J. Y.-N., Qi, W., Cheung, K. M.-C., & Aubin, C.-É. (2018, June). A novel scoliosis instrumentation using special superelastic nickel-titanium shape memory alloy spinal rods can result in equivalent correction as conventional rods but with less stress at bone-implant interface: a biomechanical evaluation through simulations [Abstract]. International Research Society of Spinal Deformities (IRSSD) 2018 Meeting, Utrecht, Netherlands. Published in Scoliosis and Spinal Disorders, 13(8). External link
Wang, X., Yeung, K., Cheung, J. P. Y., Yiu-Nam Lau, J., Qi, W., Man-Chee Cheung, K., & Aubin, C.-É. (2018, November). A novel scoliosis instrumentation using superelastic nickel-titanium shape memory alloy rods : a biomechanical analysis [Paper]. 48e Réunion annuelle de la Société de scoliose du Québec, Bromont, Québec, Canada. Unavailable
Wen, J., Raison, M., & Achiche, S. (2018). Using a cost function based on kinematics and electromyographic data to quantify muscle forces. Journal of Biomechanics, 80, 151-158. External link
Wu, Q., Therriault, D., & Heuzey, M.-C. (2018). Processing and properties of chitosan inks for 3D printing of hydrogel microstructures. ACS Biomaterials Science & Engineering, 4(7), 2643-2652. External link
Wu, Q., Zou, S., Gosselin, F., Therriault, D., & Heuzey, M.-C. (2018). 3D printing of a self-healing nanocomposite for stretchable sensors. Journal of Materials Chemistry C, 6(45), 12180-12186. External link
Xing, K., Achiche, S., Esmaeili, S., & Mayer, J. R. R. (2018, October). Comparison of direct and indirect methods for five-axis machine tools geometric error measurement [Paper]. 6th CIRP Global Web Conference – Envisaging the future manufacturing, design, technologies and systems in innovation era (CIRPe 2018). Published in Procedia CIRP, 78. Available
Xing, K., Mayer, J. R. R., & Achiche, S. (2018). Machine tool volumetric error features extraction and classification using principal component analysis and K-means. Journal of Manufacturing and Materials Processing, 2(3). Available
Xu, C. (2018). Solvent Cast Direct Ink Writing of Mesoscale Metallic Structures [Ph.D. thesis, École Polytechnique de Montréal]. Available
Xu, C., Bouchemit, A., L'Espérance, G., Laberge Lebel, L., & Therriault, D. (2018, May). 3D printing of metallic structures from a green ink [Paper]. CSME International Congress, Toronto, Ontario, Canada. External link
Xu, C., Wu, Q., L'Espérance, G., Laberge Lebel, L., & Therriault, D. (2018). Environment-friendly and reusable ink for 3D printing of metallic structures. Materials & Design, 160, 262-269. Available
Yousefian, R., Emadoddin, E., & Baharnezhad, S. (2018). Manufacturing of the aluminum metal-matrix composite reinforced with micro- and nanoparticles of TiO₂ through accumulative roll bonding process (ARB). Reviews on advanced materials science, 55(1), 1-11. Available
Yu, K. R., Hay, A., Pelletier, D., & Étienne, S. (2018). Two degrees of freedom vortex-induced vibration responses with zero mass and damping at low Reynolds number. Journal of Fluids and Structures, 83, 218-237. External link
Zhang, K. (2018). Model Predictive Control of Building Systems for Energy Flexibility [Ph.D. thesis, École Polytechnique de Montréal]. Available
Zhang, K., & Kummert, M. (2018, May). Potential of building thermal mass for energy flexibility in residential buildings: a sensitivity analysis [Paper]. Building Performance Simulation Conference (eSim 2018), Montréal, Québec. External link
Zimmermann, Y. (2018). Développement d'une modélisation par éléments finis pour caractérisation non destructive de la biomécanique osseuse à partir d'images MICRO-CT [Master's thesis, École Polytechnique de Montréal]. Available
Zoghlami, S., Béguin, C., Étienne, S., Scott, D., & Bornard, L. (2018, September). The role of added mass in the dispersion of bubble clouds [Paper]. 29th IAHR Symposium on Hydraulics Machinery and Systems (HMS 2018), Kyoto, Japan. External link
Zou, S., Therriault, D., & Gosselin, F. (2018). Failure mechanisms of coiling fibers with sacrificial bonds made by instability-assisted fused deposition modeling. Soft Matter, 14(48), 9777-9785. Available
