Seyed Ali Niknam, Jules Kouam, Victor Songméné et Marek Balazinski
Article de revue (2018)
 Document en libre accès dans PolyPublie et chez l'éditeur officiel |
|
Libre accès au plein texte de ce document Version officielle de l'éditeur Conditions d'utilisation: Creative Commons: Attribution-Pas d'utilisation commerciale-Pas de modification (CC BY-NC-ND) Télécharger (829kB) |
Abstract
Metal matrix composites (MMCs) are composed of non-metallic reinforcements (i.e., ceramic) in metal matrices which feature high toughness, wear and fatigue resistant and relatively light-weight. One of the metallic composites with remarkable mechanical properties is titanium metal matrix composite (Ti-MMC) that is considered as an alternative to nickel-based alloys. Despite excellent mechanical and physical features of Ti-MMC, due to high price and presence of hard and abrasive ceramic particles in metal matrices, machining, and machinability of Ti-MMCs is a complex subject. Knowing that very limited studies are available on machining Ti-MMCs under various flow rates and lubrication modes, adequate knowledge about the effects of cutting parameters and lubrication modes on machining attributes is a critical issue. Therefore, this study intends to present the turning of Ti-MMC under dry and semi-dry modes at various levels of flow rates. Effects of cutting parameters on several machining attributes including cutting forces, surface roughness, and particle emission will be presented in the course of this study.
Mots clés
Turning ; Ti-MMC ; Lubrication ; Cutting force ; Surface quality
| Sujet(s): | 2000 Science et technologie des matériaux > 2007 Matériaux composites |
|---|---|
| Département: | Département de génie mécanique |
| Organismes subventionnaires: | Natural Sciences and Engineering Research Council of Canada (NSERC), Fonds Québécois de la Recherche sur la Nature et les Technologies (FQRNT) |
| URL de PolyPublie: | https://publications.polymtl.ca/5059/ |
| Titre de la revue: | Procedia CIRP (vol. 77) |
| Maison d'édition: | Elsevier |
| DOI: | 10.1016/j.procir.2018.08.215 |
| URL officielle: | https://doi.org/10.1016/j.procir.2018.08.215 |
| Date du dépôt: | 20 déc. 2022 10:41 |
| Dernière modification: | 11 avr. 2024 00:14 |
| Citer en APA 7: | Niknam, S. A., Kouam, J., Songméné, V., & Balazinski, M. (2018). Dry and semi-dry turning of titanium metal matrix composites (Ti-MMCs). Procedia CIRP, 77, 62-65. https://doi.org/10.1016/j.procir.2018.08.215 |
|---|---|
Statistiques
Total des téléchargements à partir de PolyPublie
Téléchargements par année
Provenance des téléchargements
Dimensions
Actions réservées au personnel
|
Afficher document |
