<  Back to the Polytechnique Montréal portal

Items where Author is "Niknam, Seyed Ali"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Jump to: A | K | M | N | S
Number of items: 15.

A

Anahid, M. J., Heydarnia, H., Niknam, S. A., & Mehmanparast, H. (2020). Evaluating the sensitivity of acoustic emission signal features to the variation of cutting parameters in milling aluminum alloys: Part A: frequency domain analysis. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 235(10), 1558-1568. External link

Asadi, R., Yeganefar, A., & Niknam, S. A. (2019). Optimization and prediction of surface quality and cutting forces in the milling of aluminum alloys using ANFIS and interval type 2 neuro fuzzy network coupled with population-based meta-heuristic learning methods. International Journal of Advanced Manufacturing Technology, 105(5-6), 2271-2287. External link

K

Kamalizadeh, S., Niknam, S. A., Balazinski, M., & Turenne, S. (2022). The Use of TOPSIS Method for Multi-Objective Optimization in Milling Ti-MMC. Metals, 12(11), 18 pages. External link

Kamalizadeh, S., Niknam, S. A., Asgari, A., & Balazinski, M. (2018). Tool wear characterization in high-speed milling of titanium metal matrix composites. International Journal of Advanced Manufacturing Technology, 100(9-12), 2901-2913. External link

M

Musavi, S. H., Sepehrikia, M., Davoodi, B., & Niknam, S. A. (2022). Performance analysis of developed micro-textured cutting tool in machining aluminum alloy 7075-T6: assessment of tool wear and surface roughness. International Journal of Advanced Manufacturing Technology, 119(5-6), 3343-3362. External link

Memarianpour, M., Niknam, S. A., Turenne, S., & Balazinski, M. (2021). Study of the effects of initial cutting conditions and transition period on ultimate tool life when machining inconel 718. Materials, 14(3), 592 (13 pages). Available

Memarianpour, M., Niknam, S. A., Turenne, S., & Balazinski, M. (2020). Initial Tool Wear Behavior in High-Speed Turning of Inconel 718. Transactions of the Canadian Society for Mechanical Engineering, 44(3), 395-404. External link

Memarianpour, M., Niknam, S. A., Turenne, S., & Balazinski, M. (2018, December). Initial Tool Wear Mechanism in Dry and Lubricated Turning of Inconel 718 [Paper]. International Conference on Advances in Engineering Research and Application (ICERA 2018), Thai Nguyen, Vietnam. External link

N

Niknam, S. A., & Jalali, A. (2020). Effects of lubricants and flow rates on the surface roughness and chip thickness when MQL turning of aero-engine aluminum alloys 6061-T6 and 7076-T6. International Journal of Advanced Manufacturing Technology, 110(7-8), 2015-2022. External link

Niknam, S. A., Saberi, M., Kouam, J., Hashemi, R., Songmene, V., & Balazinski, M. (2019). Ultrafine and fine particle emission in turning titanium metal matrix composite (Ti-MMC). Journal of Central South University, 26(6), 1563-1572. External link

Niknam, S. A., Kouam, J., Songméné, V., & Balazinski, M. (2018). Dry and semi-dry turning of titanium metal matrix composites (Ti-MMCs). Procedia CIRP, 77, 62-65. Available

Niknam, S. A., Kamalizadeh, S., Asgari, A., & Balazinski, M. (2018). Turning titanium metal matrix composites (Ti-MMCs) with carbide and CBN inserts. International Journal of Advanced Manufacturing Technology, 97(1-4), 253-265. External link

Niknam, S. A., Balazinski, M., & Songmene, V. (2017). To characterize and optimize the surface quality attributes in slot milling operation. International Journal of Advanced Manufacturing Technology, 97(1-4), 727-746. External link

S

Safavi, M., Balazinski, M., Mehmanparast, H., & Niknam, S. A. (2020). Experimental characterization of tool wear morphology and cutting force profile in dry and wet turning of titanium metal matrix composites (Ti-MMCs). Metals, 10(11), 14 pages. Available

Saberi, M., Niknam, S. A., & Hashemi, R. (2020). On the impacts of cutting parameters on surface roughness, tool wear mode and size in slot milling of A356 metal matrix composites reinforced with silicon carbide elements. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 235(10), 1655-1667. External link

List generated on: Sun Mar 3 08:32:04 2024 EST