 | Monter d'un niveau |
Réseau de collaborationCe graphique trace les liens entre tous les collaborateurs des publications de {} figurant sur cette page.
Chaque lien représente une collaboration sur la même publication. L'épaisseur du lien représente le nombre de collaborations.
Utilisez la molette de la souris ou les gestes de défilement pour zoomer à l'intérieur du graphique.
Vous pouvez cliquer sur les noeuds et les liens pour les mettre en surbrillance et déplacer les noeuds en les glissant.
Enfoncez la touche "Ctrl" ou la touche "⌘" en cliquant sur les noeuds pour ouvrir la liste des publications de cette personne.
Musavi, S. H., Sepehrikia, M., Davoodi, B., & Niknam, S. A. (2022). Performance analysis of developed micro-textured cutting tool in machining aluminum alloy 7075-T6: assessment of tool wear and surface roughness. International Journal of Advanced Manufacturing Technology, 119(5-6), 3343-3362. Lien externe
Kamalizadeh, S., Niknam, S. A., Balazinski, M., & Turenne, S. (2022). The Use of TOPSIS Method for Multi-Objective Optimization in Milling Ti-MMC. Metals, 12(11), 18 pages. Lien externe
Memarianpour, M., Niknam, S. A., Turenne, S., & Balazinski, M. (2021). Study of the effects of initial cutting conditions and transition period on ultimate tool life when machining inconel 718. Materials, 14(3), 592 (13 pages). Disponible
Safavi, M., Balazinski, M., Mehmanparast, H., & Niknam, S. A. (2020). Experimental characterization of tool wear morphology and cutting force profile in dry and wet turning of titanium metal matrix composites (Ti-MMCs). Metals, 10(11), 14 pages. Disponible
Niknam, S. A., & Jalali, A. (2020). Effects of lubricants and flow rates on the surface roughness and chip thickness when MQL turning of aero-engine aluminum alloys 6061-T6 and 7076-T6. International Journal of Advanced Manufacturing Technology, 110(7-8), 2015-2022. Lien externe
Anahid, M. J., Heydarnia, H., Niknam, S. A., & Mehmanparast, H. (2020). Evaluating the sensitivity of acoustic emission signal features to the variation of cutting parameters in milling aluminum alloys: Part A: frequency domain analysis. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 235(10), 1558-1568. Lien externe
Memarianpour, M., Niknam, S. A., Turenne, S., & Balazinski, M. (2020). Initial Tool Wear Behavior in High-Speed Turning of Inconel 718. Transactions of the Canadian Society for Mechanical Engineering, 44(3), 395-404. Lien externe
Saberi, M., Niknam, S. A., & Hashemi, R. (2020). On the impacts of cutting parameters on surface roughness, tool wear mode and size in slot milling of A356 metal matrix composites reinforced with silicon carbide elements. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 235(10), 1655-1667. Lien externe
Asadi, R., Yeganefar, A., & Niknam, S. A. (2019). Optimization and prediction of surface quality and cutting forces in the milling of aluminum alloys using ANFIS and interval type 2 neuro fuzzy network coupled with population-based meta-heuristic learning methods. International Journal of Advanced Manufacturing Technology, 105(5-6), 2271-2287. Lien externe
Niknam, S. A., Saberi, M., Kouam, J., Hashemi, R., Songmene, V., & Balazinski, M. (2019). Ultrafine and fine particle emission in turning titanium metal matrix composite (Ti-MMC). Journal of Central South University, 26(6), 1563-1572. Lien externe
Niknam, S. A., Kouam, J., Songméné, V., & Balazinski, M. (2018). Dry and semi-dry turning of titanium metal matrix composites (Ti-MMCs). Procedia CIRP, 77, 62-65. Disponible
Kamalizadeh, S., Niknam, S. A., Asgari, A., & Balazinski, M. (2018). Tool wear characterization in high-speed milling of titanium metal matrix composites. International Journal of Advanced Manufacturing Technology, 100(9-12), 2901-2913. Lien externe
Niknam, S. A., Kamalizadeh, S., Asgari, A., & Balazinski, M. (2018). Turning titanium metal matrix composites (Ti-MMCs) with carbide and CBN inserts. International Journal of Advanced Manufacturing Technology, 97(1-4), 253-265. Lien externe
Niknam, S. A., Balazinski, M., & Songmene, V. (2017). To characterize and optimize the surface quality attributes in slot milling operation. International Journal of Advanced Manufacturing Technology, 97(1-4), 727-746. Lien externe
Memarianpour, M., Niknam, S. A., Turenne, S., & Balazinski, M. (décembre 2018). Initial Tool Wear Mechanism in Dry and Lubricated Turning of Inconel 718 [Communication écrite]. International Conference on Advances in Engineering Research and Application (ICERA 2018), Thai Nguyen, Vietnam. Lien externe
