 | Monter d'un niveau |
Ahmadfard, M., & Bernier, M. (2018). Modifications to ASHRAE's sizing method for vertical ground heat exchangers. Science and Technology for the Built Environment, 24(7), 803-817. Lien externe
Alloui, Z., Alloui, Y., & Vasseur, P. (2018). Control of Rayleigh-Benard Convection in a Fluid Layer with Internal Heat Generation. Microgravity Science and Technology, 30(6), 885-897. Lien externe
Attendu, J.-M., & Ross, A. (2018). Sparse regularization for reconstructing transient sources with time domain nearfield acoustical holography. Journal of the Acoustical Society of America, 143(6), 3796-3806. Lien externe
Attendu, J.-M., & Ross, A. (2018). Time domain nearfield acoustical holography with three-dimensional linear deconvolution. Journal of the Acoustical Society of America, 143(3), 1672-1683. Lien externe
Aubin, C.-É., Clin, J., & Rawlinson, J. (2018). Biomechanical simulations of costo-vertebral and anterior vertebral body tethers for the fusionless treatment of pediatric scoliosis. Journal of Orthopaedic Research, 36(1), 254-264. Lien externe
Bella, Y., Oulmane, A., & Mostefai, M. (2018). Industrial bearing fault detection using time-frequency analysis. Engineering Technology & Applied Science Research, 8(4), 3294-3299. Lien externe
Belzile, B., & Birglen, L. (2018). Practical considerations on proprioceptive tactile sensing for underactuated fingers. Transactions of the Canadian Society for Mechanical Engineering, 42(1), 71-79. Disponible
Benavente, M., Marcin, L., Courtois, A., Lévesque, M., & Ruiz, E. (2018). Numerical analysis of viscoelastic process-induced residual distortions during manufacturing and post-curing. Composites Part A: Applied Science and Manufacturing, 107, 205-216. Lien externe
Benkaddour, A., Lebrun, G., & Laberge Lebel, L. (2018). Thermostamping of [0/90]ₙ carbon/peek laminates: Influence of support configuration and demolding temperature on part consolidation. Polymer Composites, 39(9), 3341-3352. Lien externe
Berthoul, B., Batailly, A., Stainier, L., Legrand, M., & Cartraud, P. (2018). Phenomenological modeling of abradable wear in turbomachines. Mechanical Systems and Signal Processing, 98, 770-785. Lien externe
Bianchetti, C., Delbergue, D., Bocher, P., Lévesque, M., & Brochu, M. (2018). Analytical fatigue life prediction of shot peened AA 7050-T7451. International Journal of Fatigue, 118, 271-281. Lien externe
Bianchetti, C., Lévesque, M., & Brochu, M. (2018). Probabilistic analysis of the effect of shot peening on the high and low cycle fatigue behaviors of AA 7050-T7451. International Journal of Fatigue, 111, 289-298. Lien externe
Bianchetti, C., Zheng, R., Chromik, R. R., Lévesque, M., & Brochu, M. (2018). Comparison of small and long fatigue crack growth behavior in AA 7050-T7451. Engineering Fracture Mechanics, 202, 20-32. Lien externe
Birglen, L., & Schlicht, T. (2018). A statistical review of industrial robotic grippers. Robotics and Computer-Integrated Manufacturing, 49, 88-97. Lien externe
Bitar-Nehme, E., & Mayer, J. R. R. (2018). Modelling and compensation of dominant thermally induced geometric errors using rotary axes power consumption. CIRP Annals, 67(1), 547-550. Lien externe
Bodkhe, S., Noonan, C., Gosselin, F., & Therriault, D. (2018). Coextrusion of Multifunctional Smart Sensors. Advanced Engineering Materials, 20(10), 1800206 (6 pages). Lien externe
Bodkhe, S., Rajesh, P. S. M., Gosselin, F., & Therriault, D. (2018). Simultaneous 3D printing and poling of PVDF and its nanocomposites. ACS Applied Energy Materials, 1(6), 2474-2482. Lien externe
Bouheret, S., & Bernier, M. (2018). Modelling of a water-to-air variable capacity ground-source heat pump. Journal of Building Performance Simulation, 11(3), 1-11. Disponible
Boyer, L., Shen, J., Parent, S., Kadoury, S., & Aubin, C.-É. (2018). Accuracy and precision of seven radiography-based measurement methods of vertebral axial rotation in adolescent idiopathic scoliosis. Spine Deformity, 6(4), 351-357. Lien externe
Brideau, S. A., Beausoleil-Morrison, I., & Kummert, M. (2018). Above-floor tube-and-plate radiant floor model development and validation. Journal of Building Performance Simulation, 11(4), 449-469. Lien externe
Caggiano, A., Rimpault, X., Teti, R., Balazinski, M., Chatelain, J.-F., & Nele, L. (2018). Machine learning approach based on fractal analysis for optimal tool life exploitation in CFRP composite drilling for aeronautical assembly. CIRP Annals, 67(1), 483-486. Lien externe
Cauchy, X., Sapieha, J.-E., & Therriault, D. (2018). Hybrid Carbon-Silver Nanofillers for Composite Coatings with Near Metallic Electrical Conductivity. Advanced Engineering Materials, 20(12). Lien externe
Causse, P., Ravey, C., & Trochu, F. (2018). Capillary characterization of fibrous reinforcement and optimization of injection strategy in resin transfer molding. Journal of Composites Science, 2(2). Disponible
Che, H., Gagné, M., Rajesh, P. S. M., Sapieha, J.-E., Sirois, F., Therriault, D., & Yue, S. (2018). Metallization of Carbon Fiber Reinforced Polymers for Lightning Strike Protection. Journal of Materials Engineering and Performance, 27(10), 5205-5211. Lien externe
Chevrefils, C., Périé-Curnier, D., Parent, S., & Cheriet, F. (2018). To distinguish flexible and rigid lumbar curve from MRI texture analysis in adolescent idiopathic scoliosis: A feasibility study. Journal of Magnetic Resonance Imaging, 48(1), 178-187. Lien externe
Cimmino, M. (2018). Fast calculation of the g-functions of geothermal borehole fields using similarities in the evaluation of the finite line source solution. Journal of Building Performance Simulation, 11(6), 655-668. Disponible
Cimmino, M. (2018). A finite line source simulation model for geothermal systems with series- and parallel-connected boreholes and independent fluid loops. Journal of Building Performance Simulation, 11(4), 414-432. Disponible
Clement, J., Raison, M., & Rouleau, D. M. (2018). Reproducibility analysis of upper limbs reachable workspace, and effects of acquisition protocol, sex and hand dominancy. Journal of Biomechanics, 68, 58-64. Lien externe
Cobetto, N., Aubin, C.-É., & Parent, S. (2018). Surgical Planning and Follow-up of Anterior Vertebral Body Growth Modulation in Pediatric Idiopathic Scoliosis Using a Patient-Specific Finite Element Model Integrating Growth Modulation. Spine Deformity, 6(4), 344-350. Lien externe
Cobetto, N., Parent, S., & Aubin, C.-É. (2018). 3D correction over 2 years with anterior vertebral body growth modulation: A finite element analysis of screw positioning, cable tensioning and postoperative functional activities. Clinical Biomechanics, 51, 26-33. Lien externe
Cossin, M., Ross, A., & Gosselin, F. (2018). Repeatability of force signals in aerial circus straps. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, 232(3), 225-235. Lien externe
Courtois, A., Hirsekorn, M., Benavente, M., Jaillon, A., Marcin, L., Ruiz, E., & Lévesque, M. (2018). Viscoelastic behavior of an epoxy resin during cure below the glass transition temperature: Characterization and modeling. Journal of Composite Materials, 53(2), 155-171. Lien externe
D'Avignon, K., & Kummert, M. (2018). Modeling horizontal storage tanks with encapsulated phase change materials for building performance simulation. Science and Technology for the Built Environment, 24(4), 327-342. Lien externe
de Lima, L. A. P., Raison, M., Achiche, S., & de Lucas, R. D. (2018). Second order modeling for the pulmonary oxygen uptake on-kinetics: a comprehensive solution for overshooting and non-overshooting responses to exercise. Journal of Applied Physiology, 125(4), 1315-1328. Lien externe
de Pannemaecker, A., Fouvry, S., Buffiere, J. Y., & Brochu, M. (2018). Modelling the fretting fatigue crack growth: From short crack correction strategies to microstructural approaches. International Journal of Fatigue, 117, 75-89. Lien externe
Delcroix, B., Kummert, M., & Daoud, A. (2018). Modeling phase change materials heat capacity using artificial neural networks. Heat Transfer Research, 49(7), 617-631. Lien externe
Delikaris, A., Wang, X., Boyer, L., Larson, A. N., Ledonio, C. G. T., & Aubin, C.-É. (2018). Implant density at the apex is more important than overall implant density for 3D correction in thoracic adolescent idiopathic scoliosis using rod derotation and en bloc vertebral derotation technique. Spine, 43(11), E639-E647. Lien externe
Demers, V., Fareh, F., Turenne, S., Demarquette, N. R., & Scalzo, O. (2018). Experimental study on moldability and segregation of Inconel 718 feedstocks used in low-pressure powder injection molding. Advanced Powder Technology, 29(1), 180-190. Lien externe
Di Labbio, G., Vétel, J., & Kadem, L. (2018). Material transport in the left ventricle with aortic valve regurgitation. Physical Review Fluids, 3(11), 29 pages. Lien externe
Diehl, P., Tabiai, I., Baumann, F. W., Therriault, D., & Lévesque, M. (2018). Long term availability of raw experimental data in experimental fracture mechanics. Engineering Fracture Mechanics, 197, 21-26. Lien externe
Dupuis, S., Fortin, C., Caouette, C., Leclair, I., & Aubin, C.-É. (2018). Global postural re-education in pediatric idiopathic scoliosis: a biomechanical modeling and analysis of curve reduction during active and assisted self-correction. BMC Musculoskeletal Disorders, 19(1). Disponible
Eskandari, B., Davoodi, B., & Ghorbani, H. (2018). Multi-objective optimization of parameters in turning of N-155 iron-nickel-base superalloy using gray relational analysis. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40(4), 12 pages. Lien externe
FarzanehKaloorazi, M.H., Bonev, I. A., & Birglen, L. (2018). Simultaneous path placement and trajectory planning optimization for a redundant coordinated robotic workcell. Mechanism and Machine Theory, 130, 346-362. Lien externe
Faucheux, P. A., Gosselin, F., & Lévesque, M. (2018). Simulating shot peen forming with Eigenstrains. Journal of Materials Processing Technology, 254, 135-144. Disponible
Fedorov, D., & Birglen, L. (2018). Differential noncircular pulleys for cable robots and static balancing. Journal of Mechanisms and Robotics, 10(6), 1-8. Disponible
Fedorov, D., & Birglen, L. (2018). Geometric optimization of a self-adaptive robotic leg. Transactions of the Canadian Society for Mechanical Engineering, 42(1), 49-60. Disponible
Fradet, L., Wang, X., Crandall, D., & Aubin, C.-É. (2018). Biomechanical Analysis of Acute Proximal Junctional Failure After Surgical Instrumentation of Adult Spinal Deformity: The Impact of Proximal Implant Type, Osteotomy Procedures, and Lumbar Lordosis Restoration. Spine Deformity, 6(5), 483-491. Lien externe
Gagné-Boisvert, L., & Bernier, M. (2018). Integrated model for comparison of one- and two-pipe ground-coupled heat pump network configurations. Science and Technology for the Built Environment, 24(7), 726-742. Disponible
Gamache, J.-F., Vadean, A., Noirot-Nérin, É., Beaini, D., & Achiche, S. (2018). Image-based truss recognition for density-based topology optimization approach. Structural and Multidisciplinary Optimization, 58(6), 2697-2709. Lien externe
Garapin, J., Béguin, C., Étienne, S., Pelletier, D., & Molin, B. (2018). Non linear model of rotational galloping of square, rectangular and bundle cylinder in cross-flow. [Modélisation non-linéaire du galop en rotation pour des cylindres de sections carrées et rectangulaires]. Houille Blanche-Revue Internationale de l'Eau, 104(1), 11-17. Lien externe
Gaudet, G., Raison, M., & Achiche, S. (2018). Classification of upper limb phantom movements in transhumeral amputees using electromyographic and kinematic features. Engineering Applications of Artificial Intelligence, 68, 153-164. Lien externe
Gervais, B., Vadean, A., Brochu, M., & Raison, M. (2018). Influence of the load modelling during gait on the stress distribution in a femoral implant. Multibody System Dynamics, 44(1), 93-105. Lien externe
Ghafoori Ahangar, R., & Verreman, Y. (2018). Assessment of Mode I and Mode II Stress Intensity Factors Obtained by Displacement Extrapolation and Interaction Integral Methods. Journal of Failure Analysis and Prevention, 19(1), 85-97. Lien externe
Gritsch, L., Motta, F. L., Contessi Negrini, N., Yahia, L., & Fare, S. (2018). Crosslinked gelatin hydrogels as carriers for controlled heparin release. Materials Letters, 228, 375-378. Lien externe
Habibi, M., Ruiz, E., Lebrun, G., & Laperrière, L. (2018). Effect of surface density and fiber length on the porosity and permeability of nonwoven flax reinforcement. Textile Research Journal, 88(15), 1776-1787. Lien externe
Hasan, A., Byambaa, B., Morshed, M., Cheikh, M. I., Shakoor, R. A., Mustafy, T., & Marei, H. E. (2018). Advances in osteobiologic materials for bone substitutes. Journal of Tissue Engineering and Regenerative Medicine, 12(6), 1448-1468. Lien externe
Hébert, A. (2018). Application of Tone's and embedded self-shielding methods to pressurized water reactor assemblies. Annals of Nuclear Energy, 112, 439-449. Lien externe
Henao, J., Labelle, H., Arnoux, P.-J., & Aubin, C.-É. (2018). Biomechanical simulation of stresses and strains exerted on the spinal cord and nerves during scoliosis correction maneuvers. Spine Deformity, 6(1), 12-19. Lien externe
Hosseini-Hashemi, S., Sepahi-Boroujeni, A., & Sepahi-Boroujeni, S. (2018). Analytical and molecular dynamics studies on the impact loading of single-layered graphene sheet by fullerene. Applied Surface Science, 437, 366-374. Lien externe
Il, A., Chatelain, J.-F., Lalonde, J.-F., Balazinski, M., & Rimpault, X. (2018). An experimental investigation of the influence of cutting parameters on workpiece internal temperature during Al2024-T3 milling. International Journal of Advanced Manufacturing Technology, 97(1-4), 413-426. Lien externe
Jamati, F. (2018). Analogy between vortex waves and EM waves. Fluid Dynamics Research, 50(6), 065511 (12 pages). Lien externe
Jha, R., Chablat, D., Baron, L., Rouillier, F., & Moroz, G. (2018). Workspace, joint space and singularities of a family of delta-like robot. Mechanism and Machine Theory, 127, 73-95. Lien externe
Kadem, S., Lachemet, A., & Younsi, R. (2018). Computational Analysis of Heat and Mass Transfer During Torrefaction of Softwood Timber: a Dimensionless Analysis. International Journal on Engineering Applications (IREA), 6(3). Lien externe
Kamalizadeh, S., Niknam, S. A., Asgari, A., & Balazinski, M. (2018). Tool wear characterization in high-speed milling of titanium metal matrix composites. International Journal of Advanced Manufacturing Technology, 100(9-12), 2901-2913. Lien externe
Kaviani, R., Londono, I., Parent, S., Moldovan, F., & Villemure, I. (2018). Changes in growth plate extracellular matrix composition and biomechanics following in vitro static versus dynamic mechanical modulation. Journal of Musculoskeletal & Neuronal Interactions, 18(1), 81-91. Lien externe
Keshavarz, M. K., Turenne, S., & Bonakdar, A. (2018). Solidification behavior of inconel 713LC gas turbine blades during electron beam welding. Journal of Manufacturing Processes, 31, 232-239. Lien externe
Khoddam-Khorasani, P., Arjmand, N., & Shirazi-Adl, A. (2018). Trunk hybrid passive-active musculoskeletal modeling to determine the detailed T12-S1 response under in vivo loads. Annals of Biomedical Engineering, 46(11), 1830-1843. Lien externe
Klotz, T., Delbergue, D., Bocher, P., Lévesque, M., & Brochu, M. (2018). Surface characteristics and fatigue behavior of shot peened Inconel 718. International Journal of Fatigue, 110, 10-21. Lien externe
Klotz, T., Miao, H. Y., Bianchetti, C., Lévesque, M., & Brochu, M. (2018). Analytical fatigue life prediction of shot peened Inconel 718. International Journal of Fatigue, 113, 204-221. Lien externe
Lakis, A. A., & Oulmane, A. (2018). Nonuniform shell/flow vibration analysis for a nuclear plant. European Journal of Mathematics and Computer Science, 5(1), 93-145. Lien externe
Lamarche-Gagnon, M. E., & Vétel, J. (2018). An inverse problem to assess the two-component unsteady wall shear rate. International Journal of Thermal Sciences, 130, 278-288. Lien externe
Lamarche-Gagnon, M.-É., & Vétel, J. (2018). Experimental investigation of unsteady separation in the rotor-oscillator flow. Journal of Fluid Mechanics, 844, 546-566. Lien externe
Lamarche-Gagnon, M.-É., Sobolík, V., & Vétel, J. (2018). Diagnostics of the fluctuating wall shear rate components using an uncalibrated three-segment electrodiffusion sensor. Experiments in Fluids, 59(11). Lien externe
Lavoie, P., Bourgault-Côté, S., & Laurendeau, É. (2018). Numerical algorithms for infinite swept wing ice accretion. Computers & Fluids, 161, 189-198. Lien externe
Lavoie, P., Pena, D., Hoarau, Y., & Laurendeau, É. (2018). Comparison of thermodynamic models for ice accretion on airfoils. International Journal of Numerical Methods for Heat and Fluid Flow, 28(5), 1004-1030. Lien externe
Lebel, L., Boukhili, R., & Turenne, S. (2018). Damage to an A-N720 ceramic matrix composite under simulated gas turbine static component conditions using laser heating. Journal of Composite Materials, 52(30), 4127-4138. Lien externe
Leclaire, S., Latt, J., Vidal, D., & Bertrand, F. (2018). Multiphase periodic pressure difference boundary condition enhanced by a proportional-integral-derivative controller for the lattice Boltzmann method. International Journal for Numerical Methods in Fluids, 88(9), 434-446. Lien externe
Letellier-Duchesne, S., Nagpal, S., Kummert, M., & Reinhart, C. (2018). Balancing demand and supply: Linking neighborhood-level building load calculations with detailed district energy network analysis models. Energy, 150, 913-925. Lien externe
Los, A., & Mayer, J. R. R. (2018). Application of the adaptive Monte Carlo method in a five-axis machine tool calibration uncertainty estimation including the thermal behavior. Precision Engineering, 53, 17-25. Lien externe
Machairas, T., Kontogiannis, A., Karakalas, A., Solomou, A., Riziotis, V. A., & Saravanos, D. A. (2018). Robust fluid-structure interaction analysis of an adaptive airfoil using shape memory alloy actuators. Smart Materials and Structures, 27(10), 16 pages. Lien externe
Madra, A., Breitkopf, P., Raghavan, B., & Trochu, F. (2018). Diffuse manifold learning of the geometry of woven reinforcements in composites. Comptes Rendus Mécanique, 346(7), 532-538. Lien externe
Mohammadian, N., Turenne, S., & Brailovski, V. (2018). Surface finish control of additively-manufactured Inconel 625 components using combined chemical-abrasive flow polishing. Journal of Materials Processing Technology, 252, 728-738. Lien externe
Mohebbi, A., Achiche, S., & Baron, L. (2018). Multi-criteria fuzzy decision support for conceptual evaluation in design of mechatronic systems: a quadrotor design case study. Research in Engineering Design, 29(3), 329-349. Lien externe
Mortazavinia, Z., Camarero, R., & Guibault, F. (2018). Three-dimensional Analysis of Two-way Fluid-structure Interaction on a Flexible Hydrofoil in Viscous Flow. International Journal of Fluid Machinery and Systems, 11(3), 333-343. Lien externe
Mustafy, T., Arnoux, P.-J., Benoit, A., Bianco, R.-J., Aubin, C.-É., & Villemure, I. (2018). Load-sharing biomechanics at the thoracolumbar junction under dynamic loadings are modified by anatomical features in adolescent and pediatric vs adult functional spinal units. Journal of the Mechanical Behavior of Biomedical Materials, 88, 78-91. Lien externe
Mustafy, T., Benoit, A., Londono, I., Moldovan, F., & Villemure, I. (2018). Can repeated in vivo micro-CT irradiation during adolescence alter bone microstructure, histomorphometry and longitudinal growth in a rodent model? PLOS One, 13(11), e0207323. Disponible
Mustafy, T., Londono, I., & Villemure, I. (2018). Can the contralateral limb be used as a control during the growing period in a rodent model? Medical Engineering and Physics, 58, 31-40. Lien externe
Nabatian, N., & Mureithi, N. W. (2018). Bifurcation and stability analysis with the role of normal form symmetries on the harmonic streamwise forced oscillation of the cylinder wake. European Journal of Mechanics, B/Fluids, 70, 115-129. Lien externe
Niknam, H., Akbarzadeh, A. H., Rodrigue, D., & Therriault, D. (2018). Architected multi-directional functionally graded cellular plates. Materials and Design, 148, 188-202. Lien externe
Niknam, S. A., Kamalizadeh, S., Asgari, A., & Balazinski, M. (2018). Turning titanium metal matrix composites (Ti-MMCs) with carbide and CBN inserts. International Journal of Advanced Manufacturing Technology, 97(1-4), 253-265. Lien externe
Niknam, S. A., Kouam, J., Songméné, V., & Balazinski, M. (2018). Dry and semi-dry turning of titanium metal matrix composites (Ti-MMCs). Procedia CIRP, 77, 62-65. Disponible
Noriega, H., Guibault, F., Reggio, M., & Magnan, R. (2018). A case-study in open-source CFD code verification, Part I: Convergence rate loss diagnosis. Mathematics and Computers in Simulation, 147, 152-171. Lien externe
Noriega, H., Guibault, F., Reggio, M., & Magnan, R. (2018). A case-study in open-source CFD code verification. Part II: Boundary condition non-orthogonal correction. Mathematics and Computers in Simulation, 147, 172-193. Lien externe
Ortensi, J., Wang, Y., Laurier, A., Schunert, S., Hébert, A., & DeHart, M. (2018). A Newton solution for the superhomogenization method: The PJFNK-SPH. Annals of Nuclear Energy, 111, 579-594. Disponible
Ouadday, R., Marouene, A., Morada, G., Kaabi, A., Boukhili, R., & Vadean, A. (2018). Experimental and numerical investigation on the impact behavior of dual-core composite sandwich panels designed for hydraulic turbine applications. Composite Structures, 185, 254-263. Lien externe
Paraschivoiu, I., Ammar, S., & Saeed, F. (2018). VAWT vs HAWT : a comparative performance study of 2-6 MW rated capacity turbines. Transactions of the Canadian Society for Mechanical Engineering, 42(4), 393-403. Lien externe
Paraschivoiu, I., Shams, S., & Dy, N. V. (2018). Performance Assessment of Darrieus Wind Turbines with Symmetric and Cambered Airfoils. Transactions of the Canadian Society for Mechanical Engineering, 42(4), 382-392. Lien externe
Parenteau, M., & Laurendeau, É. (2018). Nonlinear frequency-domain solver for vortex lattice method. AIAA Journal, 56(6), 2242-2251. Lien externe
Parenteau, M., Laurendeau, É., & Carrier, G. (2018). Combined high-speed and high-lift wing aerodynamic optimization using a coupled VLM-2.5D RANS approach. Aerospace Science and Technology, 76, 484-496. Lien externe
Pea, R., Dansereau, J., Caouette, C., Cobetto, N., & Aubin, C.-É. (2018). Computer-assisted design and finite element simulation of braces for the treatment of adolescent idiopathic scoliosis using a coronal plane radiograph and surface topography. Clinical Biomechanics, 54, 86-91. Lien externe
Plante, F., & Laurendeau, É. (2018). Acceleration of Euler and RANS solvers via Selective Frequency Damping. Computers & Fluids, 166, 46-56. Lien externe
Plante, F., & Laurendeau, É. (2018). Simulation of Transonic Buffet Using a Time-Spectral Method. AIAA Journal, 57(3), 1275-1287. Lien externe
Pouliot Laforte, L., & Laberge Lebel, L. (2018). Thermal analysis and degradation of properties in carbon fiber/epoxy laminate riveting at high temperatures. Polymer Testing, 67, 205-212. Lien externe
Provencher, P. R., & Balazinski, M. (2018). Principal component idealizations of the dominant modes of variability in the mechanics of the cutting process in metal turning. International Journal of Advanced Manufacturing Technology, 95(5-8), 1665-1676. Lien externe
Rajesh, P. S. M., Sirois, F., & Therriault, D. (2018). Damage response of composites coated with conducting materials subjected to emulated lightning strikes. Materials and Design, 139, 45-55. Lien externe
Raouafi, S., Achiche, S., & Raison, M. (2018). Socioeconomic disparities and difficulties to access to healthcare services among Canadian children with neurodevelopmental disorders and disabilities. Epidemiology Health, 40, e2018010 (10 pages). Disponible
Rimpault, X., Balazinski, M., & Chatelain, J.-F. (2018). Fractal analysis application outlook for improving process monitoring and machine maintenance in manufacturing 4.0. Journal of Manufacturing and Materials Processing, 2(3), 62 (7 pages). Disponible
Rimpault, X., Bitar-Nehme, E., Balazinski, M., & Mayer, J. R. R. (2018). Online monitoring and failure detection of capacitive displacement sensor in a Capball device using fractal analysis. Measurement: Journal of the International Measurement Confederation, 118, 23-28. Lien externe
Rimpault, X., Il, A., Chatelain, J.-F., Lalonde, J.-F., & Balazinski, M. (2018). Workpiece subsurface temperature study during aluminum skin milling in slotting and ramping. Procedia CIRP, 77, 417-420. Disponible
Sarcher, A., Brochard, S., Hug, F., Letellier, G., Raison, M., Perrouin-Verbe, B., Sangeux, M., & Gross, R. (2018). Patterns of upper limb muscle activation in children with unilateral spastic cerebral palsy: Variability and detection of deviations. Clinical Biomechanics, 59, 85-93. Lien externe
Schmidt, H., & Shirazi-Adl, A. (2018). Temporal and spatial variations of pressure within intervertebral disc nuclei. Journal of the Mechanical Behavior of Biomedical Materials, 79, 309-313. Lien externe
Scola, A., Eberling-Fux, N., Turenne, S., & Ruiz, E. (2018). New liquid processing of oxide/oxide 3D wowen ceramic matrix composites. Journal of the American Ceramic Society, 102(6), 3256-3268. Lien externe
Scola, A., Podgorski, M., Eberling-Fux, N., Turenne, S., & Ruiz, E. (2018). Novel device for in situ process characterization of oxide/oxide ceramic matrix composites fabricated by flexible injection. Journal of the American Ceramic Society, 102(5), 2337-2352. Lien externe
Serra, M., Vétel, J., & Haller, G. (2018). Exact theory of material spike formation in flow separation. Journal of Fluid Mechanics, 845, 51-92. Lien externe
Sharifi, M., Shirazi-Adl, A., & Marouane, H. (2018). Computation of the role of kinetics, kinematics, posterior tibial slope and muscle cocontraction on the stability of ACL-deficient knee joint at heel strike Towards identification of copers from non-copers. Journal of Biomechanics, 77, 171-182. Lien externe
Sterba, M., Arnoux, P. J., Labelle, H., Warner, W. C., & Aubin, C.-É. (2018). Biomechanical analysis of spino-pelvic postural configurations in spondylolysis subjected to various sport-related dynamic loading conditions. European Spine Journal, 27(8), 2044-2052. Lien externe
Tabiai, I., Delorme, R., Therriault, D., & Lévesque, M. (2018). In-situ Full Field Measurements During Inter-Facial Debonding in Single Fiber Composite Under Transverse Load. Experimental Mechanics, 58(9), 1451-1467. Lien externe
Tran, D. M., Nguyen, V. K., Nguyen, M. T., & Lee, S.-W. (2018). Numerical study on relationship between geometric features of stenotic lesion and hemodynamics-based diagnostic indices of coronary artery disease. Transactions of the Korean Society of Mechanical Engineers B, 42(7), 479-485. Lien externe
Tu, F., Delbergue, D., Klotz, T., Bag, A., Miao, H., Bianchetti, C., Brochu, M., Bocher, P., & Lévesque, M. (2018). Discrete element-periodic cell coupling model and investigations on shot stream expansion, Almen intensities and target materials. International Journal of Mechanical Sciences, 145, 353-366. Lien externe
Uwamahoro, M. C., Massicotte, R., Hurtubise, Y., Gagné-Bourque, F., Mafu, A. A., & Yahia, L. (2018). Evaluating the sporicidal activity of disinfectants against Clostridium difficile and Bacillus amyloliquefaciens spores by using the improved methods based on ASTM E2197-11. Frontiers Public Health, 6, 18 (6 pages). Disponible
Vakili-Azghandi, M., Fattah-alhosseini, A., & Keshavarz, M. K. (2018). Optimizing the electrolyte chemistry parameters of PEO coating on 6061 Al alloy by corrosion rate measurement: Response surface methodology. Measurement: Journal of the International Measurement Confederation, 124, 252-259. Lien externe
Vasilevskiy, D., Keshavarz, M. K., Simard, J.-M., Masut, R. A., Turenne, S., & Snyder, G. J. (2018). Assessing the thermal conductivity of Cu2xSe alloys undergoing a phase transition via the simultaneous measurement of thermoelectric parameters by a Harman-based setup. Journal of Electronic Materials, 47(6), 3314-3319. Lien externe
Vasilevskiy, D., Masut, R. A., & Turenne, S. (2018). A Phenomenological Model of Unconventional Heat Transport Induced by Phase Transition in Cu2−xSe. Journal of Electronic Materials, 48(4), 1883-1888. Lien externe
Verdier, P., Vasilevskiy, D., Turenne, S., & Masut, R. A. (2018). Microstructure and Thermoelectric Properties of Hot Extruded Sb-Doped Mg₂Si Using MoS₂ Nano-particles as Lubricant. Journal of Electronic Materials, 47(11), 6833-6841. Lien externe
Vo, M., Mehrabian, S., Villalpando, F., Étienne, S., Pelletier, D., & Cameron, C. B. (2018). The fluid dynamics of Balanus glandula barnacles: Adaptations to sheltered and exposed habitats. Journal of Biomechanics, 71, 225-235. Lien externe
Vu, N. P., Duong, X. T., Ly, V. A., Nguyen, D. C., Tran, M. D., Phan, Q. T., Balazinski, M., Son, L. T., Zeb, G., & Le, X. T. (2018). Electroless nickel plating onto Plexiglas (R) through simple covalent grafting of vinylpyridine seed layer. Materials & Design, 144, 151-158. Lien externe
Wen, J., Raison, M., & Achiche, S. (2018). Using a cost function based on kinematics and electromyographic data to quantify muscle forces. Journal of Biomechanics, 80, 151-158. Lien externe
Wu, Q., Therriault, D., & Heuzey, M.-C. (2018). Processing and properties of chitosan inks for 3D printing of hydrogel microstructures. ACS Biomaterials Science & Engineering, 4(7), 2643-2652. Lien externe
Wu, Q., Zou, S., Gosselin, F., Therriault, D., & Heuzey, M.-C. (2018). 3D printing of a self-healing nanocomposite for stretchable sensors. Journal of Materials Chemistry C, 6(45), 12180-12186. Lien externe
Xing, K., Mayer, J. R. R., & Achiche, S. (2018). Machine tool volumetric error features extraction and classification using principal component analysis and K-means. Journal of Manufacturing and Materials Processing, 2(3). Disponible
Xu, C., Wu, Q., L'Espérance, G., Laberge Lebel, L., & Therriault, D. (2018). Environment-friendly and reusable ink for 3D printing of metallic structures. Materials & Design, 160, 262-269. Disponible
Yousefian, R., Emadoddin, E., & Baharnezhad, S. (2018). Manufacturing of the aluminum metal-matrix composite reinforced with micro- and nanoparticles of TiO₂ through accumulative roll bonding process (ARB). Reviews on advanced materials science, 55(1), 1-11. Disponible
Yu, K. R., Hay, A., Pelletier, D., & Étienne, S. (2018). Two degrees of freedom vortex-induced vibration responses with zero mass and damping at low Reynolds number. Journal of Fluids and Structures, 83, 218-237. Lien externe
Zou, S., Therriault, D., & Gosselin, F. (2018). Failure mechanisms of coiling fibers with sacrificial bonds made by instability-assisted fused deposition modeling. Soft Matter, 14(48), 9777-9785. Disponible
Bakhtiari, M., Lakis, A. A., & Kerboua, Y. (2018). Nonlinear vibration of truncated conical shells : Donnell, Sanders and Nemeth theories. (Rapport technique n° EPM-RT-2018-01). Disponible
Hubert, P., Dano, M.-L., Vadean, A., & Li, C. (2018). Development of new repair technologies for out-of-autoclave aircraft composite components. (Rapport technique n° STO-MP-AVT-266). Non disponible
Wang, X., Aubin, C.-É., & Rawlinson, J. (2018). Cross-link Torsional Stability for Posterior Fixation in Spinal Fusion Surgery – Phase 1. (Rapport technique). Non disponible
Wang, X., Aubin, C.-É., & Rawlinson, J. (2018). Dual Construct in Adult Spinal Instrumentation Phase 1 – Biomechanical Analysis. (Rapport technique). Non disponible
Wang, X., Aubin, C.-É., & Rawlinson, J. (2018). Multi-rod Constructs Biomechanical Analysis Phase 1: Characterization of Load Sharing. (Rapport technique). Non disponible
Wang, X., Aubin, C.-É., & Rawlinson, J. (2018). Multi-rod Constructs Biomechanical Analysis Phase 2: Characterization of Load Sharing in Adult Instrumentation Involving PSO. (Rapport technique). Non disponible
Ngapanoun Ebah, K., & Koalaga, S. R. (2018). Rapport UPIR session 2017-2018 sur l'application du knowledge based engineering. (Rapport d'étude - Cycles supérieurs). Disponible
Li, P. L. (2018). Modélisation multicorps du membre supérieur. (Rapport de stage - Cycles supérieurs). Disponible
Picard-Krashevski, G. (2018). Optimisation des algorithmes de planification et d'évitement d'obstacle d'un bras robotique. (Rapport de stage - Cycles supérieurs). Disponible
Alsinani, N. A., & Laberge Lebel, L. (septembre 2018). Effect of length variation of flax/polypropylene pellets produced by multi-die pultrusion on the quality of injection molded product [Communication écrite]. 18th Annual Society for Plastics Engineers Automotive Composites Conference & Exhibition, Novi, Michigan. Lien externe
Ammar, S. (juillet 2018). The interactive quiz: an educational approach to improve the retention and participation of students in practical work [Communication écrite]. EDULEARN 2018, Palma, Spain. Lien externe
Arabi, S., Trépanier, J.-Y., Camarero, R., Robin-Jouan, P., Guiavarch, P., & Zhou, T. (septembre 2018). CFD simulation of multi-component real-gas flows in high voltage circuit breaker chambers [Communication écrite]. 22nd International Conference on Gas Discharges and their Applications, Novi Sad, Serbia. Non disponible
Armellini, F., Beaudry, C., & Achiche, S. (septembre 2018). Assessing interrater fidelity for continuous innovation : how differently is innovation perceived by R&D and operations management? [Communication écrite]. 19th International Continuous Innovation Network Conference (CINet 2018), Dublin, Ireland. Non disponible
Ashrafi, F., & Vo, H. D. (juin 2018). Assessment of flow control strategies for improving centrifugal compressor efficiency [Communication écrite]. ASME Turbo Expo 2018 : Turbomachinery Technical Conference and Exposition (GT 2018), Oslo, Norway (11 pages). Lien externe
Azari, F., Arjmand, N., Shirazi-Adl, A., & Rahimi-Moghaddam, T. (mai 2017). A combined passive and active musculoskeletal model study to estimate L4-L5 load sharing [Communication écrite]. 2nd International Workshop on Spinal Loading and Deformation, Berlin, Germany. Publié dans Journal of Biomechanics, 70. Lien externe
Bafrouei, B. B., Zhang, K., & Kummert, M. (mai 2018). Energy flexibility analysis of photovoltaic system with batteries for residential buildings [Communication écrite]. Building Performance Simulation Conference (eSim 2018), Montréal, Québec. Lien externe
Benoit, D., Aubin, C.-É., Wang, X., & Crandall, D. G. (novembre 2018). Biomechanical analysis of surgical instrumentation for adult sagittal imbalance with pedicle subtraction osteotomy [Communication écrite]. 48e Réunion annuelle de la Société de scoliose du Québec, Bromont, Québec, Canada. Non disponible
Blanchet, L., Lecours, S., Docquier, Q., Barron, O., Achiche, S., & Raison, M. (juin 2018). Towards the optimal design of a passive upper limb exoskeleton compensating gravity [Communication écrite]. 5th Joint International Conference on Multibody System Dynamics, Lisbon, Portugal. Lien externe
Bourgault-Cote, S., Docampo-Sánchez, J., & Laurendeau, É. (janvier 2018). Multi-layer ice accretion simulations using a level-set method with B-spline representation [Communication écrite]. AIAA Aerospace Sciences Meeting, Kissimmee, Florida. Lien externe
Bouvard, J., Béguin, C., Étienne, S., Scott, D., & Bornard, L. (septembre 2018). Characterization of bubble cloud quality and evolution using optical probes [Communication écrite]. 29th IAHR Symposium on Hydraulics Machinery and Systems (HMS 2018), Kyoto, Japan. Lien externe
Brussieux, Y., & Bernier, M. (septembre 2018). A hybrid model for generating short-time g-functions [Communication écrite]. 2018 IGSHPA Research Track, Stockholm, Sweden (9 pages). Lien externe
Calloo, A., & Hébert, A. (juin 2018). Development and evaluation of a discontinuous galerkin method in the DRAGON5 code [Communication écrite]. 38th Annual Conference of the Canadian Nuclear Society, Saskatoon, SK. Non disponible
Chablat, D., Baron, L., Jha, R., & Rolland, L. (juillet 2018). The 3-PPPS Parallel Robot with U-Shape Base, a 6-DOF Parallel Robot with Simple Kinematics [Communication écrite]. 16th International Symposium on Advances in Robot Kinematics (ARK 2018), Bologna, Italy. Lien externe
Cimmino, M. (septembre 2018). g-functions for bore fields with mixed parallel and series connections considering axial fluid temperature variations [Communication écrite]. IGSHPA Research Track, Stockholm, Sweden (9 pages). Lien externe
Cimmino, M. (mai 2018). pygfunction: an open-source toolbox for the evaluation of thermal response factors for geothermal borehole fields [Communication écrite]. 10th Conference of IBPSA-Canada (eSIM 2018), Montréal, Qc, Canada. Lien externe
Coulon, P., Chatelain, J.-F., Dubé, M., & Rimpault, X. (juin 2018). Effect of curing pressure on machinability of carbon fiber composite [Communication écrite]. 8th CIRP Conference on High Performance Cutting (HPC 2018), Budapest, Hungary. Publié dans Procedia CIRP, 77. Disponible
Dejour, Q., & Vo, H. D. (juin 2018). Assessment of a novel non-axial counter-rotating compressor concept for aero-engines [Communication écrite]. ASME Turbo Expo 2018 : Turbomachinery Technical Conference and Exposition (GT 2018), Oslo, Norway (9 pages). Lien externe
El Ouaaid, Z., Shirazi-Adl, A., & Plamondon, A. (mai 2017). Trunk response and stability in standing under sagittal-symmetric pull-push forces at different orientations, elevations and magnitudes [Communication écrite]. 2nd International Workshop on Spinal Loading and Deformation, Berlin, Germany. Publié dans Journal of Biomechanics, 70. Lien externe
Eslami Nejad, P., Badache, M., Corcoran, A., & Bernier, M. (septembre 2018). A virtual borehole for thermal response test unit calibration : test facility and concept development [Communication écrite]. 2018 IGSHPA Research Track, Stockholm, Sweden (9 pages). Lien externe
Étienne, S., Scolan, Y.-M., & Brosset, L. (juin 2018). Numerical study of density ratio influence on global wave shapes before impact [Communication écrite]. ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), Madrid, Spain. Lien externe
Farahani, R. D., & Therriault, D. (octobre 2018). Advanced additive manufacturing of multifunctional composites [Communication écrite]. Society of Engineering Science (SES 2018), Madrid, Spain. Non disponible
FarzanehKaloorazi, M. H., Bonev, I. A., & Birglen, L. (août 2018). Parameters identification of the path placement optimization problem for a redundant coordinated robotic workcell [Communication écrite]. ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, (IDETC/CIE 2018), Québec, Québec. Lien externe
Fedorov, D., & Birglen, L. (août 2018). Kinematic and potential energy analysis of self-adaptive robotic legs [Communication écrite]. ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC/CIE 2018), Québec, Québec. Lien externe
Fortier, V., Lessard, F., & Laberge Lebel, L. (juillet 2018). Fastening composite structures using carbon fiber/polyetherimide rivets [Communication écrite]. 12th Canada-Japan Workshop on Composites, Design, Manufacturing and Applications of Composites (DMAC 2018), Takayama, Gifu, Japan. Lien externe
Fortin, S., Étienne, S., Béguin, C., Pelletier, D., & Brosset, L. (juin 2018). Numerical study of the influence of weber and reynolds numbers on the development of Kelvin-Helmholtz instability [Communication écrite]. 28th International Ocean and Polar Engineering Conference (ISOPE 2018), Sapporo, Japan. Lien externe
Gamache, J.-F., Vadean, A., & Achiche, S. (août 2018). Topology Optimization for the Design of Stiffened Panels for Wing Box [Communication écrite]. Proceedings of Design Science Research 2018: Data-Driven Design and Learning, Montréal, Canada. Non disponible
Gendreau, Y., Bélanger, M.-C., Lévesque, J., & Laberge Lebel, L. (juillet 2018). Effect of tailored fiber placement parameters on carbon fiber/epoxy composite [Communication écrite]. 12th Canada-Japan Workshop on Composites, Design, Manufacturing and Applications of Composites (DMAC 2018), Takayama, Gifu, Japan. Lien externe
Ghaedsharaf, M., Brunel, J.-E., & Laberge Lebel, L. (juin 2018). Thermoplastic Composite Rod Manufacturing using Biaxial Braid-Trusion [Communication écrite]. 18th European Conference on Composite Materials (ECCM 2018), Athens, Greece (8 pages). Non disponible
Ghezelbash, F., El Ouaaid, Z., Shirazi-Adl, A., Plamondon, A., & Arjmand, N. (mai 2017). Trunk musculoskeletal response in maximum voluntary exertions: A combined measurement-modeling investigation [Communication écrite]. 2nd International Workshop on Spinal Loading and Deformation, Berlin, Germany. Publié dans Journal of Biomechanics, 70. Lien externe
Ghezelbash, F., Eskandari, A. H., Shirazi-Adl, A., Arjmand, N., El-Ouaaid, Z., & Plamondon, A. (mai 2017). Effects of motion segment simulation and joint positioning on spinal loads in trunk musculoskeletal models [Communication écrite]. 2nd International Workshop on Spinal Loading and Deformation, Berlin, Germany. Publié dans Journal of Biomechanics, 70. Lien externe
Ghezelbash, F., Shirazi-Adl, A., El Ouaaid, Z., Plamondon, A., & Arjmand, N. (mars 2018). Subject-specific trunk musculoskeletal modeling: Characteristics, validation, and applications [Communication écrite]. 15th International Symposium Computer Methods in Biomechanics and Biomedical Engineering and 3rd Conference on Imaging and Visualization (CMBBE 2018), Lisbon, Portugal (1 page). Lien externe
Ghezelbash, F., Shirazi-Adl, A., Plamondon, A., & Arjmand, N. (mars 2018). Subject-specific risk assessment of obesity and ageing in spine biomechanics [Communication écrite]. 15th International Symposium Computer Methods in Biomechanics and Biomedical Engineering and 3rd Conference on Imaging and Visualization (CMBBE 2018), Lisbon, Portugal. Lien externe
Gnessougou, S.-O., Poulin, N., Castanedo, C. I., Maldague, X., Champlain, A. , & Robert, É. (juin 2018). Thermal diffusivity measurements with flash method at different depths in a burned composite material [Communication écrite]. 14th Quantitative InfraRed Thermography Conference, Berlin, Germany. Lien externe
Hébert, A. (avril 2018). An investigation of distributed self-shielding effects with the Tone's method [Communication écrite]. Physics of Reactors Conference: Reactor Physics Paving The Way Towards More Efficient Systems (PHYSOR 2018), Cancun, Mexico. Non disponible
Hébert, A., & Fede, L. (septembre 2018). A simplified space-time multiphysics mdoel for the Cabri core [Communication écrite]. 4th International Conference on Physics and Technology of Reactors and Applications (PHYTRA 4), Marrakech, Morocco. Non disponible
Ingremeau, J.-J., Taforeau, J., Tixier, G., & Hébert, A. (septembre 2018). Impact of the Samarium depletion chain modeling in a PWR equilibrium cycle using DRAGON and DONJON [Communication écrite]. 4th International Conference on Physics and Technology of Reactors and Applications (PHYTRA 4), Marrakech, Morocco. Non disponible
Jadidi, M., Trépanier, J.-Y., Farzad, M. A., & Dolatabadi, A. (juillet 2018). Effects of ambient air relative humidity and surface temperature on water droplet spreading dynamics [Communication écrite]. 5th ASME Joint US-European Fluids Engineering Division Summer Meeting (FEDSM 2018), Montréal, Québec. Lien externe
Javadi, H., Jomaa, W., Dalgaard, E., Brochu, M., & Bocher, P. (mai 2018). Influence of surface residual stresses on the fatigue life and crack propagation behavior of turned Inconel 718 super-alloy [Communication écrite]. 12th International Fatigue Congress (FATIGUE 2018), Poitiers, France (6 pages). Publié dans MATEC Web of Conferences, 165. Disponible
Jha, R., Chablat, D., & Baron, L. (mai 2017). Influence of design parameters on the singularities and workspace of a 3-RPS parallel robot [Communication écrite]. CCToMM Symposium on Mechanics, Machines, and Mechatronics, Montréal, Canada. Publié dans Transactions of the Canadian Society for Mechanical Engineering, 42(1). Lien externe
Khameneifar, F., & Ghorbani, H. (juillet 2018). Estimating principal curvatures in noisy point clouds through local quadric surface fitting [Communication écrite]. 15th Annual International CAD Conference (CAD 2018), Paris, France. Lien externe
Kidikian, J., & Reggio, M. (juin 2018). Off-design prediction of transonic axial compressors, Part 1: Mean-line code and tuning factors [Communication écrite]. ASME Turbo Expo 2018 : Turbomachinery Technical Conference and Exposition (GT 2018), Oslo, Norway (16 pages). Lien externe
Kidikian, J., & Reggio, M. (juin 2018). Off-design prediction of transonic axial compressors, Part 2 : Generalized mean-line loss modelling methodology [Communication écrite]. ASME Turbo Expo 2018 : Turbomachinery Technical Conference and Exposition (GT 2018), Oslo, Norway (16 pages). Lien externe
Laferrière, A., & Cimmino, M. (septembre 2018). Model predictive control applied to residential self-assisted ground source heat pump [Communication écrite]. 2018 IGSHPA Research Track, Stockholm, Sweden. Lien externe
Laine, J., Piollet, E., & Batailly, A. (juin 2018). Towards the structural optimization of bladed components featuring contact interfaces [Communication écrite]. ASME Turbo Expo 2018 : Turbomachinery Technical Conference and Exposition (GT 2018), Oslo, Norway (13 pages). Lien externe
Lakis, A. A., Mahvash, A., & Toorani, M. (juillet 2018). Diagnosis of bearing faults in complex machinery using spatial distribution of sensors and Fourier transforms [Communication écrite]. 6th International Conference on Integrity-Reliability-Failure (IRF 2018), Lisbon, Portugal. Lien externe
Lashkajani, K. H., Laurendeau, É., Castonguay, P., & Leblond, D. (juin 2017). Framework of Multiblock Structured Grid Smoothing Algorithms for Aircraft Configurations [Communication écrite]. 23rd AIAA Computational Fluid Dynamics Conference / AIAA Aviation and Aeronautics Forum and Exposition, Denver, CO. Publié dans Journal of Aircraft, 55(4). Lien externe
Leclaire, S., Vidal, D., Fradette, L., & Bertrand, F. (juin 2018). Lattice Boltzmann modeling of immiscible liquid-liquid flows in static mixers [Communication écrite]. North American Mixing Forum (Mixing XXVI), San Juan, Puerto Rico. Non disponible
Lopez Poncelas, M., Aubin, C.-É., Wang, X., & Crandall, D. G. (novembre 2018). Biomechanical Analysis of Proximal Junctional Failure for Different Proximal Fixations of the Spine [Communication écrite]. 48e Réunion annuelle de la Société de scoliose du Québec, Bromont, Québec, Canada. Non disponible
Marleau, G., & Hébert, A. (octobre 2018). DRAGON5 Workshop [Communication écrite]. 8th International Conference on Simulation Methods in Nuclear Science and Engineering (8ICSMNSE), Ottawa, ON. Non disponible
Marouane, H., Shirazi-Adl, A., & Sharifi, M. (mars 2018). Larger flexion rotations in gait reduce muscle, tibiofemoral contact and anterior cruciate ligament forces [Communication écrite]. ORS 2018 Annual Meeting, New Orleans, Louisiana. Lien externe
Mascle, C. (septembre 2018). Product end-of-life problem in the context of reverse supply chain analysis [Communication écrite]. 10th International Conference on Sustainable Development and Planning, Siena, Italy. Lien externe
McDowell, T. P., Letellier-Duchesne, S., & Kummert, M. (septembre 2018). A New Method For Determining Sub-Hourly Solar Radiation From Hourly Data [Communication écrite]. 2018 Building Performance Analysis Conference and Simbuild, Chicago, IL. Lien externe
Mouazé, N., & Birglen, L. (août 2018). Deformation Analysis of a Compliant Underactuated Finger Grasping a Soft Object [Communication écrite]. ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Québec, Québec. Lien externe
Muller, É., Pelletier, D., & Garon, A. (janvier 2018). Adaptive meshing and time-integrators for monolithic finite element solution of the URANS equations [Communication écrite]. AIAA Aerospace Sciences Meeting, Reston, VA, USA (25 pages). Lien externe
Naserkhaki, S., Arjmand, N., Shirazi-Adl, A., Farahmand, F., & El-Rich, M. (mai 2017). Effects of eight different ligament property datasets on biomechanics of a lumbar L4-L5 finite element model [Communication écrite]. 2nd International Workshop on Spinal Loading and Deformation, Berlin, Germany. Publié dans Journal of Biomechanics, 70. Lien externe
Neale, A., Kummert, M., & Bernier, M. (mai 2018). Generator : A stochastic virtual smart meter data generation model for residential building stock characterization [Communication écrite]. Building Performance Simulation Conference (eSim 2018), Montréal, Québec. Lien externe
Nguyen, M. T., Castonguay, P., & Laurendeau, É. (juillet 2018). GPUs accelerated three-dimensional RANS solver for aerodynamic simulations on multiblock grids [Communication écrite]. 10th International Conference on Computational Fluid Dynamics (ICCFDU 2018), Barcelona, Spain. Lien externe
Nyssen, F., & Batailly, A. (juin 2018). Thermo-mechanical modeling of abradable coating wear in aircraft engines [Communication écrite]. ASME Turbo Expo 2018 : Turbomachinery Technical Conference and Exposition (GT 2018), Oslo, Norway. Lien externe
Olala, S., & Mureithi, N. W. (juillet 2018). A quasi-steady in-plane fluidelastic instability analysis of a rotated triangular tube array in two-phase cross flow [Communication écrite]. ASME 2018 Pressure Vessels and Piping Conference (PVP 2018), Prague, Czech republic (9 pages). Lien externe
Parenteau, M., Sermeus, K., & Laurendeau, É. (janvier 2018). VLM coupled with 2.5D RANS sectional data for high-lift design [Communication écrite]. AIAA Aerospace Sciences Meeting, Kissimmee, Florida. Lien externe
Plante, F., Dandois, J., & Laurendeau, É. (septembre 2018). ZDES and URANS Simulations of 3D Transonic Buffet Over Infinite Swept Wings [Communication écrite]. 7th Symposium on Hybrid RANS-LES Methods, Berlin, Germany. Lien externe
Raison, M., Verlé, A., Abedrabbo, G., Detrembleur, C., Mahaudens, P., & Fisette, P. (juin 2018). Customized MBD models to contribute answering clinical questions about the spine [Communication écrite]. 5th Joint International Conference on Multibody System Dynamics, Lisbon, Portugal. Lien externe
Rohart, V., Dube, M., & Laberge Lebel, L. (mai 2018). Effects of temperature on the apparent lap shear strength of resistance-welded carbon fibre/thermoplastic composite joints [Communication écrite]. Conference and Exhibition (SAMPE 2018), Long Beach, CA. Non disponible
Ruiz, E., Pupin, C., Ross, A., Dubois, C., & Rietsch, J. C. (octobre 2018). Solving porosity growth during composite manufacturing [Communication écrite]. 5th Annual Composites and Advanced Materials Expo (CAMX 2018), Dallas, TX, United states. Lien externe
Schmidt, H., Shirazi-Adl, A., Arjman, N., & Dreischarf, M. (mars 2018). Estimation of loads on human lumbar spine - a critical review of past in vivo and computational model studies [Communication écrite]. 15th International Symposium Computer Methods in Biomechanics and Biomedical Engineering and 3rd Conference on Imaging and Visualization (CMBBE 2018), Lisbon, Portugal. Non disponible
Sharifi, M., Shirazi-Adl, A., & Marouane, H. (mars 2018). A computational lower-extremity model to quantify the stability of an anterior cruciate ligament deficient knee joint at heel strike: Gait parameters marking copers from non-copers [Communication écrite]. 15th International Symposium Computer Methods in Biomechanics and Biomedical Engineering and 3rd Conference on Imaging and Visualization (CMBBE 2018), Lisbon, Portugal. Lien externe
Sharifi, M., Shirazi-Adl, A., & Marouane, H. (mars 2018). Stability of ACL deficient knee joint at heel strike is governed by sagittal rotation-moment and cocontraction -Identification of gait parameters in copers and non-copers [Communication écrite]. ORS 2018 Annual Meeting, New Orleans, Louisiana. Lien externe
Souleimani, Y., Vo, H. D., & Yu, H. (juin 2018). Performance desensitization for a high-speed axial compressor [Communication écrite]. ASME Turbo Expo 2018 : Turbomachinery Technical Conference and Exposition (GT 2018), Oslo, Norway (14 pages). Lien externe
St-Onge, G., Kummert, M., & Kegel, M. (mai 2018). Variable capacity mini-split air source heat pump model for TRNSYS [Communication écrite]. Building Performance Simulation Conference (eSim 2018), Montréal, Québec. Lien externe
Therriault, D. (janvier 2018). Advanced additive manufacturing of multifunctional composites [Communication écrite]. Gordon Research Conference, Symposium on Multifunctional materials (GRC 2018), Ventura, United States. Non disponible
Tran, D. M., Nguyen, M. T., & Lee, S.-W. (février 2018). Machine learning based evaluation of functional index for coronary lesion severity [Communication écrite]. 2nd International Conference on Machine Learning and Soft Computing (ICMLSC 2018), Phu Quoc Island, Viet nam (4 pages). Lien externe
Trochu, F., & Causse, P. (mai 2018). Combined characterization of pose size distribution and permeability in fibrous textiles by capillary flow porometry [Communication écrite]. 14th International Conference on Flow Processes in Composite Materials, Kulturens Hus in Luleå, Sweden. Non disponible
Vautrin, Y., Pelletier, D., & Garon, A. (janvier 2018). A continuous shape sensitivity equation method of arbitrary high order [Communication écrite]. AIAA Aerospace Sciences Meeting, Kissimmee, Florida. Lien externe
Velísková, P., Bashkuev, M., Shirazi-Adl, A., & Schmidt, H. (mai 2017). Computational study of the role of fluid content and flow on the lumbar disc response in cyclic compression: Replication of in vitro and in vivo conditions [Communication écrite]. 2nd International Workshop on Spinal Loading and Deformation, Berlin, Germany. Publié dans Journal of Biomechanics, 70. Lien externe
Wang, X., Yeung, K., Cheung, J. P. Y., Yiu-Nam Lau, J., Qi, W., Man-Chee Cheung, K., & Aubin, C.-É. (novembre 2018). A novel scoliosis instrumentation using superelastic nickel-titanium shape memory alloy rods : a biomechanical analysis [Communication écrite]. 48e Réunion annuelle de la Société de scoliose du Québec, Bromont, Québec, Canada. Non disponible
Xing, K., Achiche, S., Esmaeili, S., & Mayer, J. R. R. (octobre 2018). Comparison of direct and indirect methods for five-axis machine tools geometric error measurement [Communication écrite]. 6th CIRP Global Web Conference – Envisaging the future manufacturing, design, technologies and systems in innovation era (CIRPe 2018). Publié dans Procedia CIRP, 78. Disponible
Xu, C., Bouchemit, A., L'Espérance, G., Laberge Lebel, L., & Therriault, D. (mai 2018). 3D printing of metallic structures from a green ink [Communication écrite]. CSME International Congress, Toronto, Ontario, Canada. Lien externe
Zhang, K., & Kummert, M. (mai 2018). Potential of building thermal mass for energy flexibility in residential buildings: a sensitivity analysis [Communication écrite]. Building Performance Simulation Conference (eSim 2018), Montréal, Québec. Lien externe
Zoghlami, S., Béguin, C., Étienne, S., Scott, D., & Bornard, L. (septembre 2018). The role of added mass in the dispersion of bubble clouds [Communication écrite]. 29th IAHR Symposium on Hydraulics Machinery and Systems (HMS 2018), Kyoto, Japan. Lien externe
Di Labbio, G., Vétel, J., & Kadem, L. (novembre 2018). P0006: Hearts on Fire [Affiche]. 71th Annual Meeting of the APS Division of Fluid Dynamics - Gallery of Fluid Motion, Atlanta, Georgia (1 page). Disponible
Kong, X.-Z., Parmigiani, A., Di Palma, P., Leclaire, S., & Saar, M. O. (novembre 2018). Dynamics of phase exsolution in porous media [Résumé]. 16th Swiss Geoscience Meeting, Bern, Switzerland. Lien externe
Wang, X., Yeung, K., Cheung, J. P. Y., Lau, J. Y.-N., Qi, W., Cheung, K. M.-C., & Aubin, C.-É. (juin 2018). A novel scoliosis instrumentation using special superelastic nickel-titanium shape memory alloy spinal rods can result in equivalent correction as conventional rods but with less stress at bone-implant interface: a biomechanical evaluation through simulations [Résumé]. International Research Society of Spinal Deformities (IRSSD) 2018 Meeting, Utrecht, Netherlands. Publié dans Scoliosis and Spinal Disorders, 13(8). Lien externe
Burgarella, B., Marcoux, A., & Laberge Lebel, L. (juillet 2018). Understanding the damage evolution of dry carbon fibre yarns in contact with pulleys during textile processing [Présentation]. Dans 13th World Congress in Computational Mechanics, New York, N. Y.. Lien externe
Diehl, P., Delorme, R., Tabiai, I., & Lévesque, M. (juin 2018). Extracting constitutive mechanical parameters in linear elasticity using the virtual fields method within the ordinary state-based peridynamics framework [Présentation]. Dans 18th U.S. National Congress for Theoretical and Applied Mechanics, Chicago, USA. Non disponible
Diehl, P., Delorme, R., Tabiai, I., & Lévesque, M. (mai 2018). Extracting constitutive mechanical parameters in linear elasticity using the virtual fields method within the ordinary state-based peridynamics framework [Présentation]. Dans Optimization Days 2018, Montréal, Canada. Lien externe
Diehl, P., Prudhomme, S., & Lévesque, M. (janvier 2018). A review for benchmark experiments against peridynamic models [Présentation]. Dans Nonlocal Methods in Fracture, Austin, USA. Non disponible
Mohebbi, A., Achiche, S., & Baron, L. (août 2018). Data-driven approaches in multi-criteria decision support for mechatronic systems design [Présentation]. Dans DSR Workshop on Data Driven Design and Learning, Montréal, Québec. Non disponible
Amrom, V. (2018). Lois de paroi pour les écoulements turbulents présentant des gradients de pression adverses [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Bawin, A. (2018). Adaptation anisotrope pour maillages d'éléments d'ordre élevé [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Ben Yakhlef, H. (2018). Conception et mise en place de l'instrumentation nécessaire à la comparaison entre la position à l'outil et la position à l'encodeur de l'outil d'une machine-outil à commande numérique 5-axes [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Bougrinat, Y. (2018). Design and Development of a Lightweight Ankle Exoskeleton for Human Walking Augmentation [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Bouvard, J. (2018). Étude de l'injection de bulles d'air dans un écoulement d'eau [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Brazeau-Séguin, J. (2018). Développement d'un outil de simulation pour la conception de préformes par tissage 3D [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Butler, S. (2018). Contrôle et optimisation d'un procédé de fabrication de mousses acoustiques thermodurcissables à porosité ouverte [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Canals, L. (2018). Preliminary Assessment of the Vibro-Peening Process for Improving the Fatigue Life of Aerospace Components [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Dejour, Q. (2018). Évaluation de la performance d'un compresseur contra-rotatif à écoulement mixte [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Dupuy, F. (2018). Développement d'un outil de quantification et visualisation de la cinématique du genou [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Emond, G. (2018). Stratégie de parallélisation hybride MPI/OPENMP pour EF, un programme d'analyse par éléments spectraux spécialisé pour la mécanique des fluides [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Ferlisi, C. (2018). Rotor Wake Modelling Using the Vortex-Lattice Method [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Gaudreau, J. (2018). Design and Validation of a Remote-Controlled Internal Lengthening Plate for Distraction Osteogenesis in Pediatric Patients [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Ghandali, P. (2018). A Pseudo-3D Ball Lattice Artifact and Method for Evaluating the Metrological Performance of Structured-Light 3D Scanners [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Hilal, S. (2018). Caractérisation par microtomographie de la mésostructure des renforts fibreux pour la fabrication de composites [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Ho, M. (2018). Calcul de la perméabilité en régime raréfié au travers de milieux poreux à l'aide de la méthode de Boltzmann sur réseau [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Jamshidi, M. (2018). Tool Wear Monitoring Based on Fractal Analysis of Cutting Force Signals While Machining Titanium Alloy Within CFRP/Titanium Stack [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Larouche Guilbert, M. (2018). Quantification des efforts intervertébraux et articulaires en temps-réel au cours de la marche des enfants atteints de scoliose idiopathique [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Lortie, S. (2018). Simulation d'écoulements à surface libre entre un liquide et un gaz compressible [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Ma, Y. (2018). Design conceptuel d'un incubateur pour un nanosatellite en combinant la conception axiomatique et un index unifié de performance mécatronique (MMP) [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Mazaheri, A. (2018). Numerical Simulation of Radiative Heat Transfer in a High Voltage Circuit Breaker [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Mosser, P. (2018). Caractérisation microstructurale et mécanique d'aciers à haute résistance sujets à la galvanisation continue [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Nguyen, R. P. T. (2018). Études sur les jets à contre-courant [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Petro, E. (2018). Optimisation d'une aile d'avion par la méthode de décomposition de la traînée [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Pichon, H. (2018). Outils de conception pour barrières acoustiques multicouches [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Pouliot Laforte, L. (2018). Évaluation de la dégradation thermique de structures en composites assemblées par rivetage à haute température [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Ramananarivo, M. (2018). Conception et fabrication d'une prothèse myoéléctrique biofidèle pour amputés huméraux [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Scheiffer, Y. (2018). Comparaison de résolutions elliptiques entre la méthode des frontières immergées et la méthode des volumes finis [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Somveille, Q. (2018). Effect of Selective Oxidation on Temperature Measurements of AHSS with Pyrometry [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
St-Onge, G. (2018). Variable Capacity Mini-Split Air Source Heat Pump Model for TRNSYS [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Stocco, T. (2018). Configuration de l'âme en nid d'abeille sur des réflecteurs d'antennes spatiales [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Tenni, B. (2018). Étude expérimentale de l'effet du contenu inclusionnaire sur les propriétés mécaniques de résilience et de fatigue-propagation au seuil de soudures en acier 410 NIMO [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Verdier, P. (2018). Caractérisation de composés thermoélectriques à base de Mg2Si extrudés à chaud [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Zimmermann, Y. (2018). Développement d'une modélisation par éléments finis pour caractérisation non destructive de la biomécanique osseuse à partir d'images MICRO-CT [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Ahmadfard, M. (2018). A Comprehensive Review of Vertical Ground Heat Exchangers Sizing Models With Suggested Improvements [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Alami Mchichi, N. (2018). Étalonnage des machines-outils à cinq axes : configuration optimisée des artefacts et de la séquence de mesure de la méthode SAMBA en vue d'une estimation efficace des erreurs géométriques [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Bianchetti, C. (2018). Analytical Fatigue Life Prediction of Shot Peened 7050-T7451 Aluminium Alloy [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Cauchy, X. (2018). Approaching Typical Metallic Conductivities in Polymer Nanocomposites for Lightning Strike Protection [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Courtois, A. (2018). 3D Interlock Composites Multi-Scale Viscoelastic Model Development, Characterization and Modeling [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Ghafoori Ahangar, R. (2018). Fatigue Behavior of Welded Joints with Partial Penetration [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Klotz, T. (2018). Analytical Prediction of Shot Peening Effects on Nickel-Based Superalloy Inconel 718 Fatigue Life [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Lamarche-Gagnon, M.-É. (2018). Développement de la méthode électrodiffusionnelle pour la mesure instantanée des deux composantes du frottement pariétal [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Mortazavinia, Z. (2018). Two-Way Fluid-Structure Coupling Methodology for Modeling 3D Flexible Hydrofoils in Viscous Flow [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Ouadday, R. (2018). Caractérisation mécanique des structures sandwichs utilisées comme extension d'avant-directrices des turbines hydroélectriques [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Ramirez Uribe, A. G. (2018). Design of a Mechatronic System for the Characterization of Polymer Composite Material Properties During Molding Processes [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Scola, A.-D. (2018). Étude du procédé d'injection flexible pour le moulage par voie liquide de composites à matrice céramique oxyde/oxyde [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Tabiai, I. (2018). 3D Full Field Displacement and Strain Measurements at the Microscale in Fiber Reinforced Composites Under Transverse Load Using Digital Image Correlation [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Xu, C. (2018). Solvent Cast Direct Ink Writing of Mesoscale Metallic Structures [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Zhang, K. (2018). Model Predictive Control of Building Systems for Energy Flexibility [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Laberge Lebel, L., & Fortier, V. (2018). Apparatus and methods for installing composite rivets. (Brevet no WO3592538). Lien externe
Beaini, D. (2018). Object analysis in images using electric potentials and electric fields. (Demande de brevet no WO2018045472). Lien externe
Therriault, D., & Chizari, K. (2018). Electrically conductive ink for solvent-cast 3D printing. (Demande de brevet no US20180022023). Lien externe
Beaini, D., Achiche, S., Law-Kam Cio, Y.-S., & Raison, M. (2018). Novel convolution kernels for computer vision and shape analysis based on electromagnetism. (Rapport). Disponible
Birglen, L. (2018). Mécatronique : cours avec exercices corrigés. (2e éd.). Non disponible
Laberge Lebel, L., & Nakai, A. (édit.) (2018). Design, manufacturing and applications of composites : proceedings of the 12th Canada-Japan Workshop on Composites, July 4-7, 2018, Takayama, Gifu, Japan. Lien externe
Vo, H. D., & Mureithi, N. W. (2018). Improving aircraft performance with plasma actuators. Lien externe
Farahani, R. D., Therriault, D., Dubé, M., Bodkhe, S., & Mahdavi, M. (2018). Additive Manufacturing of Multifunctional Nanocomposites and Composites II. Dans Beaumont, P. W. R., & Zweben, C. H. (édit.), Comprehensive Composite Materials II (p. 380-407). Lien externe
Hébert, A. (2018). Équations de Lagrange. Dans Meriam, J. L., Kraige, L. G., & Bolton, J. N. (édit.), Mécanique de l'ingénieur : Dynamique (8e éd.). Lien externe
Lonca, G., Muggéo, R., Tétreault-Imbeault, H., Bernard, S., & Margni, M. (2018). A bi-dimensional assessment to measure the performance of circular economy: A case study of tires end-of-life management. Dans Benetto, E., Gericke, K., & Guiton, M. (édit.), Designing Sustainable Technologies, Products and Policies (p. 33-42). Disponible
Sokolowski, W., Chirani, N., & Yahia, L. (2018). CHEM Biomedical Applications. Dans Sokolowski, W. (édit.), Cold Hibernated Elastic Memory Structure: Self-Deployable Technology and Its Applications (p. 335-344). Lien externe
Sokolowski, W., Chirani, N., & Yahia, L. (2018). CHEM for endovascular interventions of aneurysm. Dans Sokolowski, W. (édit.), Cold Hibernated Elastic Memory Structure: Self-Deployable Technology and Its Applications . Lien externe
