 | Monter d'un niveau |
Abbasi, S., Carreau, P., Derdouri, A., & Moan, M. (2009). Rheological Properties and Percolation in Suspensions of Multiwalled Carbon Nanotubes in Polycarbonate. Rheologica Acta, 48(9), 943-959. Lien externe
Adouni, M., & Shirazi-Adl, A. (2009). Knee joint biomechanics in closed-kinetic-chain exercises. Computer Methods in Biomechanics and Biomedical Engineering, 12(6), 661-670. Lien externe
Aissa, B., Fauteux, C., Khakani, M. A. E., & Therriault, D. (2009). Structural and photoluminescence properties of laser processed ZnO/carbon nanotube nanohybrids. Journal of Materials Research, 24(11), 3313-3320. Lien externe
Akrout, K., Baron, L., & Wang, X. (2009). Manipulateur sériel 6R sphérique isotrope pour toute orientation de l'effecteur. Transactions of the Canadian Society for Mechanical Engineering, 33(4), 679-688. Lien externe
Aliyu, M. D. S., & Boukas, E.-K. (2009). Mixed H-2/H-infinity nonlinear filtering. International Journal of Robust and Nonlinear Control, 19(4), 394-417. Lien externe
Alloui, Z., Bennacer, R., & Vasseur, P. (2009). Variable permeability effect on convection in binary mixtures saturating a porous layer. Heat and Mass Transfer, 45(8), 1117-1127. Lien externe
Alloui, Z., Bennacer, R., Beji, H., & Vasseur, P. (2009). Natural convection in a shallow cavity containing two superposed layers of immiscible binary liquids. Acta Mechanica, 203(3-4), 223-239. Lien externe
Alloui, Z., Dufau, L., Beji, H., & Vasseur, P. (2009). Multiple steady states in a porous enclosure partially heated and fully salted from below. International Journal of Thermal Sciences, 48(3), 521-534. Lien externe
Arjmand, N., Gagnon, D., Plamondon, A., Shirazi-Adl, A., & Larivière, C. (2009). Comparison of trunk muscle forces and spinal loads estimated by two biomechanical models. Clinical Biomechanics, 24(7), 533-541. Lien externe
Bazrgari, B., Shirazi-Adl, A., & Lariviere, C. (2009). Trunk response analysis under sudden forward perturbations using a kinematics-driven model. Journal of Biomechanics, 42(9), 1193-200. Lien externe
Bazrgari, B., Shirazi-Adl, A., & Parnianpour, M. (2009). Transient analysis of trunk response in sudden release loading using kinematics-driven finite element model. Clinical Biomechanics, 24(4), 341-347. Lien externe
Béguin, C., Anscutter, F., Ross, A., Pettigrew, M. J., & Mureithi, N. W. (2009). Two-phase damping and interface surface area in tubes with vertical internal flow. Journal of Fluids and Structures, 25(1), 178-204. Lien externe
Bernier, F., Bailon, J.-P., & L'Espérance, G. (2009). Microstructural characterization and mechanical properties of free-machining sintered steel parts containing up to 1 Wt Pct MnS. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, 40(10), 2291-2300. Lien externe
Bilgen, E. (2009). Conjugate heat transfer by conduction and natural convection on a heated vertical wall. Applied Thermal Engineering, 29(2-3), 334-339. Lien externe
Birglen, L. (2009). Type synthesis of linkage-driven self-adaptive fingers. Journal of Mechanisms and Robotics, 1(2), 021010-021010. Lien externe
Blais, J.-F., & Ross, A. (2009). Forward projection of transient sound pressure fields radiated by impacted plates using numerical Laplace transform. Journal of the Acoustical Society of America, 125(5), 3120-3128. Lien externe
Blais, J.-F., Cimmino, M., Ross, A., & Granger, D. (2009). Suppression of time aliasing in the solution of the equations of motion of an impacted beam with partial constrained layer damping. Journal of Sound and Vibration, 326(3-5), 870-882. Lien externe
Boukas, E.-K. (2009). Delay-Dependent Robust Stabilizability of Singular Linear Systems With Delays. Stochastic Analysis and Applications, 27(4), 637-655. Lien externe
Boukas, E.-K. (2009). H-Infinity Control of Discrete-Time Markov Jump Systems With Bounded Transition Probabilities. Optimal Control Applications & Methods, 30(5), 477-494. Lien externe
Boukas, E.-K. (2009). On reference model tracking for Markov jump systems. International Journal of Systems Science, 40(4), 393-401. Lien externe
Brochu, M., Verreman, Y., & Ajersch, F. (2009). La mise en forme dans le domaine semi-solide : des avantages métallurgiques et économiques. Materiaux et techniques, 97(2), 90-93. Lien externe
Cancel, M., Grimard, G., Thuillard-Crisinel, D., Moldovan, F., & Villemure, I. (2009). Effects of in Vivo Static Compressive Loading on Aggrecan and Type II and X Collagens in the Rat Growth Plate Extracellular Matrix. Bone, 44(2), 306-315. Lien externe
Chevrefils, C., Cheriet, F., Aubin, C.-É., & Grimard, G. (2009). Texture analysis for automatic segmentation of intervertebral disks of scoliotic spines from MR images. IEEE Transactions on Information Technology in Biomedicine, 13(4), 608-620. Lien externe
Daly, H. B., Harchay, M., Belhadjsalah, H., & Boukhili, R. (2009). Experimental characterization and numerical simulation of the humidity absorption process in glass reinforced composites under dissymmetric exposure conditions. Polymer Composites, 30(12), 1825-1836. Lien externe
De Nardo, L., Alberti, R., Cigada, A., Yahia, L., Tanzi, M. C., & Fare, S. (2009). Shape memory polymer foams for cerebral aneurysm reparation: effects of plasma sterilization on physical properties and cytocompatibility. Acta Biomaterialia, 5(5), 1508-1518. Lien externe
Dionne, R., Baron, L., & Mascle, C. (2009). A C++ library for the automatic interpretation of geometrical and dimensional tolerances. International Journal of Advanced Manufacturing Technology, 45(9-10), 896-906. Lien externe
Doria, M., & Birglen, L. (2009). Design of an underactuated compliant gripper for surgery using nitinol. Journal of Medical Devices, 3(1), 011007-011007. Lien externe
Driscoll, M., Aubin, C.-É., Moreau, A., Villemure, I., & Parent, S. (2009). The Role of Spinal Concave-Convex Biases in the Progression of Idiopathic Scoliosis. European Spine Journal, 18(2), 180-187. Lien externe
Duke, K., Aubin, C.-É., Dansereau, J., Koller, A., & Labelle, H. (2009). Dynamic positioning of scoliotic patients during spine instrumentationsurgery. Journal of spinal disorders and techniques, 22(3), 190-196. Lien externe
El Ouaaid, Z., Arjmand, A., Shirazi-Adl, A., & Parnianpour, M. (2009). A novel approach to evaluate abdominal coactivities for optimal spinal stability and compression force in lifting. Computer Methods in Biomechanics and Biomedical Engineering, 12(6), 735-745. Lien externe
El-Rich, M., Arnoux, P.-J., Wagnac, E., Brunet, C., & Aubin, C.-É. (2009). Finite element investigation of the loading rate effect on the spinal load-sharing changes under impact conditions. Journal of Biomechanics, 42(9), 1252-1262. Lien externe
El-Rich, M., Villemure, I., Labelle, H., & Aubin, C.-É. (2009). Mechanical Loading Effects on Isthmic Spondylolytic Lumbar Segment: Finite Element Modelling Using a Personalised Geometry. Computer Methods in Biomechanics and Biomedical Engineering, 12(1), 13-23. Lien externe
Esmailzadeh, M., Lakis, A. A., Thomas, M., & Marcouiller, L. (2009). Prediction of the response of a thin structure subjected to a turbulent boundary-layer-induced random pressure field. Journal of Sound and Vibration, 328(1-2), 109-128. Lien externe
Étienne, S., Garon, A., & Pelletier, D. (2009). Perspective on the geometric conservation law and finite element methods for ALE simulations of incompressible flow. Journal of Computational Physics, 228(7), 2313-2333. Lien externe
Fauteux, C., Khakani, M. A. E., Pegna, J., & Therriault, D. (2009). Influence of solution parameters for the fast growth of ZnO nanostructures by laser-induced chemical liquid deposition. Applied Physics A, 94(4), 819-829. Disponible
Fregeau, M., Gabr, M., Paraschivoiu, I., & Saeed, F. (2009). Simulation of heat transfer from hot-air jets impinging a three-dimensional concave surface. Journal of Aircraft, 46(2), 721-726. Lien externe
Ghafar-Zadeh, E., Sawan, M., & Therriault, D. (2009). CMOS based capacitive sensor laboratory-on-chip: A multidisciplinary approach. Analog Integrated Circuits and Signal Processing, 59(1), 1-12. Lien externe
Ghafar-Zadeh, E., Sawan, M., & Therriault, D. (2009). A microfluidic packaging technique for lab-on-chip applications. IEEE Transactions on Advanced Packaging, 32(2), 410-416. Lien externe
Ghafar-Zadeh, E., Sawan, M., Therriault, D., Rajagopalan, S., & Chodavarapu, V. P. (2009). A direct-write microfluidic fabrication process for CMOS-based lab-on-chip applications. Microelectronic Engineering, 86(10), 2104-2109. Lien externe
Granger, D., & Ross, A. (2009). Effects of partial constrained viscoelastic layer damping parameters on the initial transient response of impacted cantilever beams: experimental and numerical results. Journal of Sound and Vibration, 321(1-2), 45-64. Lien externe
Haidar, A., & Boukas, E.-K. (2009). Exponential stability of singular systems with multiple time-varying delays. Automatica, 45(2), 539-545. Lien externe
Haidar, A., Boukas, E.-K., Xu, S., & Lam, J. (2009). Exponential stability and static output feedback stabilisation of singular time-delay systems with saturating actuators. IET Control Theory and Applications, 3(9), 1293-1305. Lien externe
Hay, A., Borggaard, J. T., & Pelletier, D. (2009). Local improvements to reduced-order models using sensitivity analysis of the proper orthogonal decomposition. Journal of Fluid Mechanics, 629, 41-72. Lien externe
Hay, A., Pelletier, D., & Di Caro, R. (2009). Verified predictions of shape sensitivities in wall-bounded turbulent flows by an adaptive finite-element method. Journal of Computational Physics, 228(12), 4510-4531. Lien externe
Hayashi, K., Upasani, V. V., Pawelek, J. B., Aubin, C.-É., Labelle, H., Lenke, L. G., Jackson, R., & Newton, P. O. (2009). Three-Dimensional Analysis of Thoracic Apical Sagittal Alignment in Adolescent Idiopathic Scoliosis. Spine, 34(8), 792-797. Lien externe
Irhirane, E. H., Echaabi, J., Aboussaleh, M., Hattabi, M., & Trochu, F. (2009). Matrix and fibre stiffness degradation of a Quasi-isotrope graphite epoxy laminate under flexural bending test. Journal of Reinforced Plastics and Composites, 28(2), 201-223. Lien externe
Jolly, P., & Marchand, L. (2009). Leakage predictions for static gasket based on the porous media theory. Journal of Pressure Vessel Technology, 131(2), 021203-021203. Lien externe
Khoukhi, A., Baron, L., & Balazinski, M. (2009). Constrained multi-objective trajectory planning of parallel kinematic machines. Robotics and Computer-Integrated Manufacturing, 25(4-5), 756-769. Lien externe
Khoukhi, A., Baron, L., Balazinski, M., & Demirli, K. (2009). Hybrid neuro-fuzzy multi-objective trajectory planning of redundant manipulators. Control and Intelligent Systems, 37(2), 87-96. Lien externe
Kuhn, M., Napporn, T. W., Meunier, M., Vengallatore, S., & Therriault, D. (2009). Miniaturization limits for single-chamber micro-solid oxide fuel cells with coplanar electrodes. Journal of Power Sources, 194(2), 941-949. Disponible
Laberge Lebel, L., Aïssa, B., Paez, O. A., El Khakani, M. A., & Therriault, D. (2009). Three-dimensional micro structured nanocomposite beams by microfluidic infiltration. Journal of Micromechanics and Microengineering, 19(12), 125009. Disponible
Lakis, A. A., Bursuc, G., & Toorani, M. H. (2009). Sloshing effect on the dynamic behavior of horizontal cylindrical shells. Nuclear Engineering and Design, 239(7), 1193-1206. Lien externe
Lamarre, M.-E., Parent, S., Labelle, H., Aubin, C.-É., Joncas, J., Cabral, A., & Petit, Y. (2009). Assessment of Spinal Flexibility in Adolescent Idiopathic Scoliosis Suspension Versus Side-Bending Radiography. Spine, 34(6), 591-597. Lien externe
Lanoue, F., Vadean, A., & Sanschagrin, B. (2009). Finite element analysis and contact modelling considerations of interference fits for fretting fatigue strength calculations. Simulation Modelling Practice and Theory, 17(10), 1587-1602. Lien externe
Lapointe, F., Turenne, S., & Julien, B. (2009). Low viscosity feedstocks for powder injection moulding. Powder Metallurgy, 52(4), 338-344. Lien externe
Lemire, S., Vo, H. D., & Benner, M. W. (2009). Performance improvement of axial compressors and fans with plasma actuation. International Journal of Rotating Machinery, 2009, 1-13. Disponible
Lin, H., Aubin, C.-É., Parent, S., & Villemure, I. (2009). Mechanobiological bone growth: comparative analysis of two biomechanical modeling approaches. Medical and Biological Engineering and Computing, 47(4), 357-366. Lien externe
Lourdel, N., Therriault, D., & Lévesque, M. (2009). Identification of constitutive theory parameters using a tensile machine for deposited filaments of microcrystalline ink by the direct-write method. Journal of Micromechanics and Microengineering, 19(9), 095017 (7 pages). Disponible
Ma, S., & Boukas, E.-K. (2009). Robust H-Infinity Filtering for Uncertain Discrete Markov Jump Singular Systems With Mode-Dependent Time Delay. IET Control Theory and Applications, 3(3), 351-361. Lien externe
Ma, S., & Boukas, E.-K. (2009). A singular system approach to robust sliding mode control for uncertain Markov jump systems. Automatica, 45(11), 2707-2713. Lien externe
Ma, S., & Boukas, E.-K. (2009). Stability and robust stabilisation for uncertain discrete stochastic hybrid singular systems with time delay. IET Control Theory and Applications, 3(9), 1217-1225. Lien externe
Majdouline, Y., Aubin, C.-É., Sangole, A., & Labelle, H. (2009). Computer simulation for the optimization of instrumentation strategies in adolescent idiopathic scoliosis. Medical and Biological Engineering and Computing, 47(11), 1143-1154. Lien externe
Mascle, C., & Xing, K. (2009). A liaison model for disassembly-reassembly product ecodesign. International Journal of Design Engineering, 2(3), 346-368. Lien externe
Miao, H. Y., Larose, S., Perron, C., & Lévesque, M. (2009). On the potential applications of a 3D random finite element model for the simulation of shot peening. Advances in Engineering Software, 40(10), 1023-1038. Lien externe
Nault, M. L., Labelle, H., Aubin, C.-É., Sangole, A., & Balazinski, M. (2009). Fuzzy logic assisted surgical planning in adolescent idiopathic scoliosis. Journal of Spinal Disorders & Techniques, 22(4), 263-269. Lien externe
Ndiaye, D., & Bernier, M. (2009). Modelling the bleed port of a thermostatic expansion valve. [Modélisation de l'orifice d'égalisation de pression d'un détendeur thermostatique]. International Journal of Refrigeration, 32(5), 826-836. Lien externe
Nguyen, T. H., Nguyen-Quang, T., Guichard, F., Nicolau, A., Szatmari, G., Lepalec, G., Dusser, M., Lafossee, J., Bonnet, J. L., & Bohatier, J. (2009). Two-Dimensional Gravitactic Bioconvection in a Protozoan (Tetrahymena Pyriformis) Culture. Zoological Science, 26(1), 54-65. Lien externe
Nouanegue, H. F., & Bilgen, E. (2009). Heat transfer by convection, conduction and radiation in solar chimney systems for ventilation of dwellings. International Journal of Heat and Fluid Flow, 30(1), 150-157. Lien externe
Nouanegue, H. F., Muftuoglu, A., & Bilgen, E. (2009). Heat transfer by natural convection, conduction and radiation in an inclined square enclosure bounded with a solid wall. International Journal of Thermal Sciences, 48(5), 871-880. Lien externe
Onat Ekinci, T., Mayer, J. R. R., & Cloutier, G. (2009). Investigation of accuracy of aerostatic guideways. International Journal of Machine Tools and Manufacture, 49(6), 478-487. Lien externe
Paraschivoiu, I., Trifu, O., & Saeed, F. (2009). H-Darrieus wind turbine with blade pitch control. International Journal of Rotating Machinery, 2009, 505343. Disponible
Pettigrew, M. J., & Taylor, C. E. (2009). Vibration of a normal triangular tube bundle subjected to two-phase freon cross flow. Journal of Pressure Vessel Technology, 131(5), 051302-051302. Lien externe
Philippe, M., Bernier, M., & Marchio, D. (2009). Validity ranges of three analytical solutions to heat transfer in the vicinity of single boreholes. Geothermics, 38(4), 407-413. Lien externe
Qin, Z., Baron, L., & Birglen, L. (2009). Robust design of inertial measurement units based on accelerometers. Journal of Dynamic Systems, Measurement and Control, 131(3), 031010-031010. Lien externe
Raouf, J., & Boukas, E.-K. (2009). Stabilisation of singular Markovian jump systems with discontinuities and saturating inputs. IET Control Theory and Applications, 3(7), 971-982. Lien externe
Raouf, J., & Boukas, E.-K. (2009). Stabilization of Singular Markovian Jump Systems With Discontinuities and Saturating Inputs. Journal of Optimization Theory and Applications, 143(2), 369-389. Lien externe
Raouf, J., & Boukas, E.-K. (2009). Stochastic output feedback controller for singular Markovian jump systems with discontinuities. IET Control Theory and Applications, 3(1), 68-78. Lien externe
Ratle, F., Achim, V., & Trochu, F. (2009). Evolutionary operators for optimal gate location in liquid composite moulding. Applied Soft Computing, 9(2), 817-823. Lien externe
Raynauld, J., Martel, C., Villiot-Leclercq, E., Gerbé, O., Jullien, J., & Camarero, R. (2009). Pour un système intégré de gestion du processus d'éducation et de formation. Revue internationale des technologies en pédagogie universitaire, 6(2-3), 56-56. Disponible
Rhode, M., Derdouri, A., & Kamal, M. R. (2009). Rheological Properties and Percolation in Suspensions of Multiwalled Carbon Nanotubes in Polycarbonate. International Polymer Processing, 24(3). Non disponible
Riou, A., & Mascle, C. (2009). Assisting designer using feature modeling for lifecycle. Computer-Aided Design, 41(12), 1034-1049. Lien externe
Robitaille, M., Aubin, C.-É., & Labelle, H. (2009). Effects of Alternative Instrumentation Strategies in Adolescent Idiopathic Scoliosis: a Biomechanical Analysis. Journal of Orthopaedic Research, 27(1), 104-113. Lien externe
Rousseau, B., & Baron, L. (2009). Kinematic isotropy of the h4 class of parallel manipulators. Transactions of the Canadian Society for Mechanical Engineering, 33(4), 701-713. Lien externe
Ruiz, E., & Billotte, C. (2009). Predicting the cure of thermosetting polymers : the iso-conversion map. Polymer Composites, 30(10), 1450-1457. Lien externe
Sangole, A. P., & Levin, M. F. (2009). Palmar Arch Modulation in Patients With Hemiparesis After a Stroke. Experimental Brain Research, 199(1), 59-70. Lien externe
Sangole, A. P., Aubin, C.-É., Labelle, H., Stokes, I. A. F., Lenke, L. G., Jackson, R., & Newton, P. (2009). Three-Dimensional Classification of Thoracic Scoliotic Curves. Spine, 34(1), 91-99. Lien externe
Sankaranarayanane, K., Balamurugan, K., & Rigaud, M. (2009). Mechanical properties up to 1100 C of Al2O3-MgO-extruded graphite pellets castables reinforced with steel fibres. Ceramics International, 35(1), 359-362. Lien externe
Scalzo, O., Turenne, S., Gauthier, M., & Brailovski, V. (2009). Mechanical and microstructural characterization of porous NiTi shape memory alloys. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 40(9), 2061-2070. Lien externe
Sergerie, K., Lacoursiere, M.-O., Lévesque, M., & Villemure, I. (2009). Mechanical properties of the porcine growth plate and its three zones from unconfined compression tests. Journal of Biomechanics, 42(4), 510-516. Lien externe
Shirazi, R., & Shirazi-Adl, A. (2009). Analysis of partial meniscectomy and ACL reconstruction in knee joint biomechanics under a combined loading. Clinical Biomechanics, 24(9), 755-761. Lien externe
Shirazi, R., & Shirazi-Adl, A. (2009). Computational biomechanics of articular cartilage of human knee joint: effect of osteochondral defects. Journal of Biomechanics, 42(15), 2458-2465. Lien externe
Soukane, D. M., Shirazi-Adl, A., & Urban, J. P. G. (2009). Investigation of Solute Concentrations in a 3d Model of Intervertebral Disc. European Spine Journal, 18(2), 254-262. Lien externe
Stokes, I. A. F., Sangole, A. P., & Aubin, C.-É. (2009). Classification of Scoliosis Deformity Three-Dimensional Spinal Shape by Cluster Analysis. Spine, 34(6), 584-590. Lien externe
Tam, S. K., De Haan, B. J., Faas, M. M., Hallé, J.-P., Yahia, L., & de Vos, P. (2009). Adsorption of Human Immunoglobulin to Implantable Alginate-Poly-L-Lysine Microcapsules: Effect of Microcapsule Composition. Journal of Biomedical Materials Research. Part A, 89A(3), 609-615. Lien externe
Thomassin, J., Vo, H. D., & Mureithi, N. W. (2009). Blade Tip Clearance Flow and Compressor Nonsynchronous Vibrations: the Jet Core Feedback Theory as the Coupling Mechanism. Journal of Turbomachinery, 131(1). Lien externe
Vétel, J., Garon, A., & Pelletier, D. (2009). Lagrangian coherent structures in the human carotid artery bifurcation. Experiments in Fluids, 46(6), 1067-1079. Lien externe
Vidal, D., Ridgway, C., Pianet, G., Schoelkopf, J., Roy, R., & Bertrand, F. (2009). Effect of particle size distribution and packing compression on fluid permeability as predicted by lattice-Boltzmann simulations. Computers and Chemical Engineering, 33(1), 256-266. Lien externe
Vigil-Galan, O., Cruz-Gandarilla, F., Fandio, J., Roy, F., Sastre-Hernandez, J., & Contreras-Puente, G. (2009). Physical properties of Bi₂Te₃ and Sb₂Te₃ films deposited by close space vapor transport. Semiconductor Science and Technology, 24(2). Lien externe
Villemure, I., & Stokes, I. A. F. (2009). Growth plate mechanics and mechanobiology. A survey of present understanding. Journal of Biomechanics, 42(12), 1793-1803. Lien externe
Wozniak, A., Mayer, J. R. R., & Balazinski, M. (2009). Stylus tip envelop method: Corrected measured point determination in high definition coordinate metrology. International Journal of Advanced Manufacturing Technology, 42(5-6), 505-514. Lien externe
Xia, Y., Boukas, E.-K., Shi, P., & Zhang, J. (2009). Stability and stabilization of continuous-time singular hybrid systems. Automatica, 45(6), 1504-1509. Lien externe
Xu, S., Lam, J., Shi, P., Boukas, E.-K., & Zou, Y. (2009). Guaranteed Cost Control for Uncertain Neutral Stochastic Systems Via Dynamic Output Feedback Controllers. Journal of Optimization Theory and Applications, 143(1), 207-223. Lien externe
Yu, J., & Camarero, R. (2009). A study of the Soret effect in laser-induced chemical vapor deposition. Applied Physics. A, Materials Science & Processing, 95(2), 601-611. Lien externe
Zargarbashi, S. H. H., & Mayer, J. R. R. (2009). Single setup estimation of a five-axis machine tool eight link errors by programmed end point constraint and on the fly measurement with Capball sensor. International Journal of Machine Tools and Manufacture, 49(10), 759-766. Lien externe
Zebdi, O., Boukhili, R., & Trochu, F. (2009). An inverse approach based on laminate theory to calculate the mechanical properties of braided composites. Journal of Reinforced Plastics and Composites, 28(23), 2911-2930. Lien externe
Zebdi, O., Boukhili, R., & Trochu, F. (2009). Optimum design of a composite helical spring by multi-criteria optimization. Journal of Reinforced Plastics and Composites, 28(14), 1713-1732. Lien externe
Zhang, C., Pettigrew, M. J., & Mureithi, N. W. (2009). Further study of quasiperiodic vibration excitation forces in rotated triangular tube bundles subjected to two-phase cross flow. Journal of Pressure Vessel Technology, 131(3), 031303-031303. Lien externe
Zhang, L. X., & Boukas, E.-K. (2009). H-Infinity Control for Discrete-Time Markovian Jump Linear Systems With Partly Unknown Transition Probabilities. International Journal of Robust and Nonlinear Control, 19(8), 868-883. Lien externe
Zhang, L. X., & Boukas, E.-K. (2009). Mode-Dependent H-Infinity Filtering for Discrete-Time Markovian Jump Linear Systems With Partly Unknown Transition Probabilities. Automatica, 45(6), 1462-1467. Lien externe
Zhang, L., & Boukas, E.-K. (2009). H-Infinity Control of a Class of Extended Markov Jump Linear Systems. IET Control Theory and Applications, 3(7), 834-842. Lien externe
Zhang, L., & Boukas, E.-K. (2009). Stability and stabilization of Markovian jump linear systems with partly unknown transition probabilities. Automatica, 45(2), 463-468. Lien externe
Zhang, L., Boukas, E.-K., & Shi, P. (2009). Dependent model reduction for uncertain discrete-time switched linear systems with average dwell time. International Journal of Control, 82(2), 378-388. Lien externe
Zhang, L., Boukas, E.-K., & Shi, P. (2009). H model reduction for discrete-time Markov jump linear systems with partially known transition probabilities. International Journal of Control, 82(2), 343-351. Lien externe
Bui-Quoc, T., Lévesque, M., & Julien, D. (2009). Étude du comportement en fatigue-propagation d'un acier martensitique CA6NM en eau douce. (Rapport technique). Non disponible
Chinniah, Y. A., Boukas, E.-K., Pizarro-Chong, A., El Aboudi, M., Burlet-Vienney, D., Sirard, C., & Daigle, R. (2009). Développement d'un outil d'observation et de suivi des procédures de cadenassage en utilisant sur une presse à injection - Étude de faisabilité. (Rapport technique n° R-615). Lien externe
Esmailzadeh, M., & Lakis, A. A. (2009). Prediction of the response of a thin structure subjected to a turbulent boundary-layer-induced random pressure field. (Rapport technique n° EPM-RT-2009-06). Disponible
Esteve, A., Badri, B., Zagbani, I., Thomas, M., & Lakis, A. A. (2009). Les problèmes de vibration en UHV. (Rapport technique). Non disponible
Lévesque, M., Therriault, D., & Nowlan, I. (2009). Wedge clamp verification testing. (Rapport technique). Non disponible
Wang, X., Aubin, C.-É., & Coleman, J. (2009). Multi Planar Adjusting (MPA) pedicle screw biomechanical analysis. (Rapport technique). Non disponible
Abbasi, S., Derdouri, A., & Carreau, P. (juin 2009). Effect of crystalline structure on morphology and properties of MWCNT nanocomposites [Communication écrite]. 67th Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2009), Chicago, IL, United states. Lien externe
Abbasi, S., Derdouri, A., & Carreau, P. (août 2009). Effect of nanotube alignment on the morphology and properties of Polycarbonate/MWCNT nanocomposites [Communication écrite]. 8th World Congress of Chemical Engineering, Montréal, Québec. Non disponible
Adouni, M., & Shirazi-Adl, A. (février 2009). Knee closed-kinetic-chain squat exercises generate high cartilage contact stresses and low ligament forces [Communication écrite]. 55th annual meeting of Orthopaedic Research Society, Las Vegas, Nevada. Lien externe
Akrout, K., Baron, L., & Wang, X. (mai 2009). Manipulateur sériel 6R sphérique isotrope pour toute orientation de l'effecteur [Isotropic Spherical 6R Serial Manipulator for Any Orientation of its End-Effector]. [Communication écrite]. Canadian Committee for the Theory of Machines and Mechanisms Symposium (CCToMM M3), Québec, QC (11 pages). Lien externe
Amini, A., Veilleux, D., & Villemure, I. (février 2009). Three-dimensional in situ morphology of viable porcine growth plate chondrocytes: a confocal microscopy study [Communication écrite]. 55th annual meeting of Orthopaedic Research Society, Las Vegas, Nevada. Lien externe
Andre, C., Vasilevskiy, D., Turenne, S., & Masut, R. A. (août 2008). Extruded bismuth-telluride-based n-type alloys for waste heat thermoelectric recovery applications [Communication écrite]. 27th International Conference on Thermoelectrics, Corvallis, Oregon. Publié dans Journal of Electronic Materials, 38(7). Lien externe
Badri, B., Thomas, M., Sassi, S., Zaghbani, I., Songméné, V., Lakis, A. A., & Mureithi, N. W. (mai 2009). Étude du comportement des roulements dans les rotors tournant à haute vitesse [Communication écrite]. 2e congrès international sur l'ingénierie des risques industriels (CIRI 2009), Reims, France (15 pages). Non disponible
Badri, B., Thomas, M., Sassi, S., Zaghbani, I., Songméné, V., Lakis, A. A., & Mureithi, N. W. (octobre 2009). Instabilité des fraiseuses opérant à haute vitesse, provoquée par l'intéraction des défauts de roulements avec les résonances [Communication écrite]. 27th Seminar on Machinery Vibration (CMVA 2009), Vancouver, B.C.. Lien externe
Balazinski, M., Beaton, H., Klim, Z. H., & Peloquin, F. (juin 2009). Hard Landing Indication System [Communication écrite]. COMADEM 2009, San Sebastian, Spain. Non disponible
Batailly, A., Legrand, M., Cartraud, P., Pierre, C., & Lombart, J.-P. (août 2009). Evaluation d'une méthode de réduction modale pour la détection de cas d'interaction modale lors de contacts rotor stator [Communication écrite]. 19eme Congrès Français de Mécanique (CFM2009), Marseille, France. Lien externe
Bazrgari, B., Shirazi-Adl, A., & Arjmand, N. (juin 2009). Trunk seated biodynamic response to axial impact; effect of muscle coactivity [Communication écrite]. 4th International Conference on Whole Body Vibration Injuries, Montréal, Québec. Lien externe
Bazrgari, B., Shirazi-Adl, A., & Parnianpour, M. (février 2009). Kinematics-driven analysis of trunk response under sudden unloading [Communication écrite]. 55th annual meeting of Orthopaedic Research Society, Las Vegas, Nevada. Lien externe
Belanger, A., Vétel, J., Garon, A., & Pelletier, D. (mai 2009). Adaptive grid stretching for Lagrangian coherent structures identification [Communication écrite]. 11th Conference of the International Society for Grid Generation, Montréal, Québec. Non disponible
Brochu, M., Verreman, Y., Ajersch, F., & Bucher, L. (juillet 2009). Fatigue testing of a cast aluminum alloy : experimental challenges [Communication écrite]. 12th International Conference on Fracture, Ottawa, Ontario. Non disponible
Brochu, M., Verreman, Y., Ajersch, F., & Charette, N. (janvier 2008). Défis expérimentaux dans l'étude du comportement en fatigue de l'alliage A357 [Communication écrite]. Journée du REGAL 2008. Non disponible
Bureau, M., Maire, M., Diaz-Quijada, G., Robitaille, L., Ajji, A., & Merhi, Y. (juin 2009). Nonwoven pet fiber structures for vascular graft applications [Communication écrite]. 67th Annual Technical Conference of the Society of Plastics Engineers, Chicago, IL, United states. Lien externe
Camarero, R., Fortin, C., Huet, G., Raynauld, J., & Gerbe, O. (mars 2009). XML-based course syllabi: An electronic implementation of the CDIO syllabus [Communication écrite]. 1st International Conference on Computer Supported Education, Lisboa, Portugal. Non disponible
Cancel, M., Grimard, G., Thuillard-Crisinel, D., Moldovan, F., & Villemure, I. (février 2009). Effects of in Vivo Mechanical Loading on Extracellular Matrix Components of the Growth Plate [Communication écrite]. 55th annual meeting of Orthopaedic Research Society, Las Vegas, Nevada. Non disponible
Carreau, P., Abbasi, S., & Derdouri, A. (octobre 2009). Rheological properties and percolation behavior of polypropylene/multiwalled carbon nanotube composites [Communication écrite]. 81st Annual Meeting of the Society of Rheology, Madison, WI, USA. Lien externe
Cauret, O., & Bernier, M. (juin 2009). Experimental validation of an underground compact collector model [Communication écrite]. Effstock 2009, Stockholm, Sweden. Non disponible
Chapuis, S., & Bernier, M. (juillet 2009). Seasonal storage of solar energy in boreholes [Communication écrite]. 11th International Building Performance Simulation Association Conference and Exhibition, Glasgow. Non disponible
Charlot, L., Cori, J.-F., Étienne, S., & Pelletier, D. (juin 2009). Continuous eulerian and lagrangian sensitivities for the design of airfoils in laminar flow [Communication écrite]. 19th AIAA Computational Fluid Dynamics Conference, San Antonio, Texas. Lien externe
Charlot, L., Cori, J.-F., Étienne, S., & Pelletier, D. (mai 2009). Fast estimate of flows on nearby geometries using a Lagrangian sensitivity equation [Communication écrite]. Annual Conference of the CFD Society of Canada, Ottawa, Canada. Non disponible
Charlot, L., Cori, J.-F., Étienne, S., & Pelletier, D. (mai 2009). Optimal design and uncertainty analysis of airfoils in laminar flows by a Lagrangian sensitivity equation method [Communication écrite]. CASI meeting. Non disponible
Charlot, L., Étienne, S., & Pelletier, D. (janvier 2009). A continuous Lagrangian sensitivity equation method for shape parameters [Communication écrite]. 46th AIAA ASM, Orlando, FL. Lien externe
Chioukh, L., Boutayeb, H., Li, L., Yahia, L., & Wu, K. (décembre 2009). Integrated radar systems for precision monitoring of heartbeat and respiratory status [Communication écrite]. Asia-Pacific Microwave Conference (APMC 2009), Singapore. Lien externe
Clin, T., Turenne, S., Vasilevskiy, D., & Masut, R. A. (août 2008). Numerical simulation of the thermomechanical behavior of extruded bismuth telluride alloy module [Communication écrite]. 27th International Conference on Thermoelectrics, Corvallis, Oregon. Publié dans Journal of Electronic Materials, 38(7). Lien externe
Drolet, M., Thomassin, J., Vo, H. D., & Mureithi, N. W. (juin 2009). Numerical Investigation Into Non-Synchronous Vibrations of Axial Flow Compressors by the Resonant Tip Clearance Flow [Communication écrite]. ASME Turbo Expo: Power for Land, Sea, and Air (GT 2009), Orlando, Florida, USA. Lien externe
Erkan, T., Mayer, J. R. R., & Dupont, Y. (octobre 2009). Compensation for the unknown geometry of a reconfigurable uncalibrated 3D ball artefact for fiveaxis machine volumetric check [Communication écrite]. 24th Annual Meeting of the American Society for Precision Engineering (ASPE 2009), Monterey, CA, United states. Non disponible
Eslami Nejad, P., & Bernier, M. (juillet 2009). Impact of grey water heat recovery on the electrical demand of domestic hot water heaters [Communication écrite]. 11th International Building Performance Simulation Association Conference and Exhibition, Glasgow. Lien externe
Eslami Nejad, P., Langlois, A., Chapuis, S., Bernier, M., & Faraj, W. (juin 2009). Solar heat injection into boreholes [Communication écrite]. 4th annual Canadian solar buildings conference : plug into the sun, Toronto, Ont. Non disponible
Étienne, S., Fontaine, E., & Scolan, Y.-M. (juin 2009). Vortex- and wake-induced vibrations of two and three cylinders arranged in-line [Communication écrite]. 19th International Offshore and Polar Engineering Conference, Osaka, Japan. Non disponible
Étienne, S., Garon, A., & Pelletier, D. (juin 2009). Geometric conservation law and finite element methods for 3D unsteady simulations of incompressible flow [Communication écrite]. 39th AIAA Fluid Dynamic Conference & Exhibit, San Antonio, Texas. Lien externe
Étienne, S., Pelletier, D., & Garon, A. (janvier 2009). Verification of unsteady flows simulations with high order time-stepping schemes [Communication écrite]. 46th AIAA ASM, Orlando, FL. Lien externe
Étienne, S., Pelletier, D., Garon, A., & Cameron, C. (janvier 2009). Aurelia aurita's flight: finite element modeling of a jellyfish self-propulsion [Communication écrite]. 46th AIAA ASM, Orlando, FL. Lien externe
Étienne, S., Pelletier, D., Garon, A., & Cameron, C. (juin 2009). Philiadium gregarum versus aurelia aurita : on propulsion efficiency in jellyfish [Communication écrite]. 39th AIAA Fluid Dynamic Conference & Exhibit, San Antonio, Texas. Non disponible
Fauteux, C., Smirani, R., Pegna, J., El Khakani, M. A., & Therriault, D. (mai 2008). Fast synthesis of ZnO nanostructures by laser-induced chemical liquid deposition [Communication écrite]. European Material Research Society Spring Meeting 2008 - Symposium B: Laser and Plasma in Micro- and Nano-Scale Materials Processing and Diagnostics, Strasbourg, France. Publié dans Applied Surface Science, 255(10). Lien externe
Fossa, M., Cauret, O., & Bernier, M. (juin 2009). Comparing the thermal performance of ground heat exchangers of various lengths [Communication écrite]. Effstock 2009, Stockholm, Sweden. Non disponible
Gamacurta, E., Étienne, S., & Pelletier, D. (janvier 2009). Unsteady RANS computations with and adaptive finite element method [Communication écrite]. 46th AIAA ASM, Orlando, FL. Non disponible
Gammacurta, E., Étienne, S., & Pelletier, D. (mai 2009). Adaptive grids for unsteady RANS flows [Communication écrite]. CASI meeting, Montréal, Québec. Non disponible
Gammacurta, E., Étienne, S., & Pelletier, D. (mai 2009). Adaptive grids for URANS equations [Communication écrite]. 11th Conference of the International Society for Grid Generation, Montréal, Québec. Non disponible
Gammacurta, E., Étienne, S., & Pelletier, D. (juin 2009). Sensitivity analysis of unsteady RANS flows [Communication écrite]. 19th AIAA Computational Fluid Dynamics Conference, San Antonio, Texas. Lien externe
Garcia, J. A., Gascón, L., Chinesta, F., Ruiz, E., & Trochu, F. (juin 2009). An approach to simulate the saturation in RTM/VARI process [Communication écrite]. 3rd Manufacturing Engineering Society International Conference, Alcoy, Spain. Non disponible
Gemme, F., Verreman, Y., Jahazi, M., & Dubourg, L. (janvier 2008). Étude expérimentale et numérique de l'histoire thermo-mécanique du soudage par friction-malaxage [Communication écrite]. Journée du REGAL 2008. Non disponible
Guiet, J., Reggio, M., & Teyssedou, A. (mai 2009). Application of the Lattice - Boltzmann method to the calculation of the aerodynamic parameters on clean and ice-accreted airfoils [Communication écrite]. 17th Annual Conference of the CFD Society of Canada, Ottawa, Canada. Non disponible
Haidar, A., Boukas, E.-K., Xu, S., & Lam, J. (juin 2009). Exponential stability and static output feedback stabilization of singular time-delay systems with saturating actuators [Communication écrite]. American Control Conference, St. Louis, MO, United states. Lien externe
Huet, G., Vadean, A., Spooner, D., & Camarero, R. (septembre 2009). Knowledge management : a new educational challenge for student design projects [Communication écrite]. 11th Conference on Engineering and Product Design Education, Brighton, England. Lien externe
Kerboua, Y., Lakis, A. A., Thomas, M., Marcouiller, L., & Toorani, M. H. (juillet 2009). Critical velocity of potential flow in interaction with a system of plates [Communication écrite]. 17th International Conference on Nuclear Engineering (ICONE 2009), Brussels, Belgium. Lien externe
Kerboua, Y., Lakis, A. A., Thomas, M., Marcouiller, L., & Toorani, M. H. (septembre 2009). Hybrid element in fluid-structure interaction of plates and shells [Communication écrite]. 12th International Conference on Civil, Structural and Environmental Engineering, Madeira, Portugal. Non disponible
Khan, K. A., Gudlur, P., Barello, R., Muliana, A. H., & Lévesque, M. (juin 2009). Heat conduction and thermal stresses in particulate composites [Communication écrite]. 8th International Congress on Thermal Stresses, Urbana-Champaign, Illinois, USA. Non disponible
Kim, E.-J., Roux, J.-J., Bernier, M., & Cauret, O. (mai 2009). Problématique de la modélisation des échangeurs géothermiques verticaux [Communication écrite]. IXe Colloque inter-universitaire Franco-Québécois, Lille. Non disponible
Kuhn, M., Rao, R. B., & Therriault, D. (avril 2009). Viscoelastic inks for direct-write microfabrication of single-chamber micro solid oxide fuel cells with coplanar thick electrodes [Communication écrite]. Material Systems and Processes for Three-Dimensional Micro- and Nanoscale Fabrication and Lithography, San Francicso, CA, United states. Lien externe
Kummert, M. (juin 2023). Integrated heat pump systems modelling, design and performance simulation [Communication écrite]. Scottish Energy Systems Group workshop on Heat Pumps, Glasgow, UK. Non disponible
Kummert, M., Dempster, W., & McLean, K. (juillet 2009). Thermal analysis of a data centre cooling system under fault conditions [Communication écrite]. Building simulation 2009 (IBPSA world), Glasgow, UK. Lien externe
Laberge Lebel, L., Aissa, B., Khakani, M. A. E., & Therriault, D. (avril 2009). Ultraviolet-assisted direct-write fabrication of three-dimensional microstructures [Communication écrite]. MRS Spring Meeting, Boston, MA, USA. Non disponible
Lacroix, S., De Marcellis-Warin, N., Riopel, D., Ross, A., & Bernandini, N. (novembre 2009). La chaire Marianne-Mareschal à l'École Polytechnique de Montréal [Communication écrite]. 2nd International PROMETEA Conference, Paris, France. Non disponible
Lakis, A. A., & Toorani, M. H. (juillet 2009). Application of time-frequency method in fault diagnosis of rotating machinery [Communication écrite]. 3rd International Conference on Integrity, Reliability & Failure, Porto, Portugal. Non disponible
Lebel, F., Ruiz, E., Dulong, S., & Trochu, F. (septembre 2009). Experimental investigation of dual-scale reinforcement imbibition [Communication écrite]. Joint American Society for Composites/Association for Composite Structure and Materials Conference, Newark, Delaware. Non disponible
Ma, S., & Boukas, E.-K. (août 2009). A descriptor system approach to sliding mode control for uncertain Markov jump systems [Communication écrite]. 7th Asian Control Conference, Hong Kong, China. Non disponible
Ma, S., & Boukas, E.-K. (juin 2009). Robust quadratic control of discrete-time singular markov jump systems with bounded transition probabilities [Communication écrite]. American Control Conference, St. Louis, MO, United states. Lien externe
Ma, S., & Boukas, E.-K. (juin 2009). Stability and H control for discrete-time singular systems subject to actuator saturation [Communication écrite]. American Control Conference, St. Louis, MO, United states. Lien externe
Mahvash, A., Oulmane, A., & Lakis, A. A. (juin 2009). Development of an intelligent health monitoring system for rotating machinery and structural components [Communication écrite]. CANEUS Fly-by-Wireless Workshop (FBW 2009), Montréal, Québec. Non disponible
Mascle, C. (juin 2009). Conception pour la renaissance et structure des données [Communication écrite]. 8e Congrès international de génie industriel, Bagnères de Bigorre, France. Non disponible
Mascle, C. (juin 2009). Decision support system for sustainable product design and manufacturing [Communication écrite]. 42nd CIRP Conference on Manufacturing Systems, Grenoble, France. Non disponible
Mascle, C. (novembre 2009). Product modelling and decision support system for product EOL [Communication écrite]. IEEE International Symposium on Assembly and Manufacturing (ISAM 2009). Lien externe
Miao, H. Y., Perron, C., & Lévesque, M. (mai 2009). Finite element simulation and experimental study of stress peen forming process [Communication écrite]. CASI Aircraft Design and Development Symposium, Kanata, Canada. Non disponible
Murphy, G. B., Kummert, M., Anderson, B. R., & Counsell, J. (juillet 2009). A comparison of the UK standard assessment procedure (SAP) and detailed simulation of building-integrated renewable energy systems [Communication écrite]. Building simulation 2009 (IBPSA world), Glasgow, UK. Lien externe
Murray, M. C., Finlayson, N., Kummert, M., & Macbeth, J. (juillet 2009). Live energy TRNSYS : TRNSYS simulation within Google sketchup [Communication écrite]. Building simulation 2009 (IBPSA world), Glasgow, UK. Lien externe
Musa, K., Chu, J., Derdouri, A., & Hrymak, A. (juin 2009). The morphology of micro-injection molded polyoxymethylene [Communication écrite]. 67th Annual Technical Conference of the Society of Plastics Engineers, Chicago, IL, United states. Non disponible
Nafi, A., Mayer, J. R. R., & Wozniak, A. (octobre 2009). Redundancy method for the separation of machine and triggering probe errors in small volume measurement on a CMM [Communication écrite]. 24th Annual Meeting of the American Society for Precision Engineering (ASPE 2009), Monterey, CA, United states. Non disponible
Navah, F., Étienne, S., & Pelletier, D. (janvier 2009). Coupled and semi-coupled finite element algorithms for the k-[epsilon] model [Communication écrite]. 46th AIAA ASM, Orlando, FL. Lien externe
Nouanegue, H. F., Peysson, P., Costes, V., & Bernier, M. (mai 2009). Influence de la température ambiante et du flux géothermique sur le transfert thermique dans un puits géothermqiue vertical [Communication écrite]. IXe Colloque inter-universitaire Franco-Québécois, Lille. Non disponible
Nouanegue, H. F., Shirazi, A. S., & Bernier, M. (juin 2009). Extracted heat from geothermal boreholes : where does the energy come from [Communication écrite]. 4th annual Canadian solar buildings conference : plug into the sun, Toronto, Ont.. Non disponible
Ouahabi, A., Thomas, M., & Lakis, A. A. (mai 2009). Hybrid monitoring of crack location in riveted plates by combining an experimental modal analysis with numerical models [Communication écrite]. 2e congrès international sur l'ingénierie des risques industriels (CIRI 2009), Reims, France. Non disponible
Oulmane, A., Lakis, A. A., Mureithi, N. W., & Safizadeh, M. S. (juin 2009). The application of time-frequency analysis in rotating machinery fault diagnostic [Communication écrite]. 22nd International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2009), San Sebastian, Spain. Non disponible
Palaisi, D., Guibault, R., Thomas, M., Lakis, A. A., & Mureithi, N. W. (octobre 2009). Simulations numériques du comportement vibratoire d'engrenages endommagés [Numerical simulations of damaged gear vibrations]. [Communication écrite]. 27th Seminar on Machinery Vibration (CMVA 2009), Vancouver, B.C.. Lien externe
Pelletier, D. (mai 2009). CFD : Dynamique des fluides et aérodynamique numériques [Communication écrite]. Journée de la recherche École Polytechnique de Montréal, Montréal, Québec. Non disponible
Pelletier, D. (mars 2009). Simulation based engineering: Challenge in verification, validation, and uncertainty analysis [Communication écrite]. Computational Mechanics: the Next Decade, Fairfax, VA. Non disponible
Popov, A. V., Fehri, M. F., Chambon, R. P., Marleau, G., Teyssedou, A., Olekhnovitch, A., Popescu, O. M., & Mureithi, N. W. (mai 2009). Ensuring negative coolant-void reactivity in CANDU Generation III+ [Communication écrite]. International Conference on Mathematics, Computational Methods and Reactor Physics, Saratoga Springs, NY, United states. Non disponible
Reggio, M., Ubertini, S., Succi, S., & Bella, G. (mai 2009). Application of the residual distribution methodology to the lattice [Communication écrite]. 17th Annual Conference of the CFD Society of Canada, Ottawa, Canada. Non disponible
Ren, Q., Balazinski, M., & Baron, L. (octobre 2009). Uncertainty prediction for tool wear condition using type-2 TSK fuzzy approach [Communication écrite]. IEEE International Conference on Systems, Man and Cybernetics, San Antonio, Texas, USA. Lien externe
Ren, Q., Baron, L., & Balazinski, M. (juin 2009). Application of Type-2 fuzzy estimation on uncertainty in machining: an approach on acoustic emission during turning process [Communication écrite]. 28th North American Fuzzy Information Processing Society Annual Conference. Lien externe
Ren, Q., Baron, L., & Balazinski, M. (août 2009). Type-2 TSK Fuzzy filtering and uncertainty estimation for acoustic emission in precision manufacturing [Communication écrite]. International Symposium on Computational Intelligence, Honolulu, Hawaii. Lien externe
Rigaud, M. (octobre 2009). FIRE : New challenges ahead [Communication écrite]. Unified International Technical Conference Refractories, Salvador, Brazil. Non disponible
Rousseau, B., & Baron, L. (mai 2009). Isotropie des manipulateurs parallèles de la classe H4 [Communication écrite]. CCToMM Mechanisms, Machines and Mechatronics (M3) Symposium, Québec, Canada (12 pages). Lien externe
Ruiz, E., & Achim, V. (juillet 2009). RTM process analysis and on-line characterization [Communication écrite]. 17th International Conference on Composite Materials, Edinburgh, UK. Lien externe
Sabri, F., & Lakis, A. A. (mai 2009). Hydroelastic vibration of partially liquid-filled circular cylindrical shells under combined internal pressure and axial compression [Communication écrite]. 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Palm Springs, California. Lien externe
Sabri, F., & Lakis, A. A. (juin 2009). Supersonic flutter of empty and partially liquid-filled circular cylindrical shells [Communication écrite]. 14th International Forum on Aeroelasticity and Structural Dynamics, Seattle, WA. Non disponible
Sabri, F., Lakis, A. A., & Toorani, M. H. (septembre 2009). Hybrid finite element method in supersonic flutter analysis of circular cylindrical shells [Communication écrite]. 31st International Conference on Boundary Elements and Other Mesh Reduction Methods (BEM/MRM 2009), New Forest, United kingdom. Lien externe
Sergerie, K., Gennaro, B., Eveno, A. S., Dubois-Rious, M. C., Lacoursière, M. O., & Villemure, I. (février 2009). Intrinsic mechanical properties of porcine growth plate vary with developmental stages [Communication écrite]. 55th annual meeting of Orthopaedic Research Society, Las Vegas, Nevada. Non disponible
Sghir, K. A., El Badaoui, M., Thomas, M., Zaghbani, I., Songméné, V., Lakis, A. A., & Mureithi, N. W. (mai 2009). Identification aveugle paramétrique de la fonction de réponse impulsionnelle basée sur la cyclostationnarité de second ordre à partir des réponses seulement [Communication écrite]. 2e congrès international sur l'ingénierie des risques industriels (CIRI 2009), Reims, France. Non disponible
Shirazi, R., & Shirazi-Adl, A. (février 2009). Partial meniscectomy changes contact stress distribution in knee joint under combined loading [Communication écrite]. 55th annual meeting of Orthopaedic Research Society, Las Vegas, Nevada. Lien externe
Shirazi, R., Shirazi-Adl, A., & Hurtig, M. (février 2009). Vertical collagen fibrils play a crucial mechanical role in articular cartilage of knee joints under compression [Communication écrite]. 55th annual meeting of Orthopaedic Research Society, Las Vegas, Nevada. Non disponible
Slamani, M., Mayer, J. R. R., Balazinski, M., & Engin, S. (mai 2009). Modeling and prediction of machines tools errors from circular tests [Communication écrite]. CANCAM 2009, Halifax. Non disponible
Sola, M., Jetté, M.-A., Fotsing, R., Cimmino, M., Ross, A., & Ruiz, E. (juillet 2009). Analytical and experimental study of embedded damping elements in composite applications [Communication écrite]. 17th International Conference on Composite Materials, Edinburgh, UK. Non disponible
Spitler, J. D., Cullin, J. R., Lee, E., Fisher, D. E., Bernier, M., Kummert, M., Cui, P., & Liu, X. (juin 2009). Preliminary intermodel comparison of ground heat exchanger simulation models [Communication écrite]. Effstock 2009, Stockholm, Sweden. Non disponible
Spooner, D., Huet, G., Fortin, C., Vadean, A., & Niewoehner, R. (juin 2009). The assessment of engineering reasoning recorded in student engineering design journal [Communication écrite]. 5th International CDIO Conference, Singapore. Lien externe
Surcel, M., Buzatu, P., & Vadean, A. (août 2009). Numerical simulation for evaluating child occupant behaviour in the case of a rear impact [Communication écrite]. International Technical Conference on the Enhanced Safety of Vehicles, Stuttgart, Germany. Non disponible
Trochu, F., Demaria, C., Ruiz, E., Dambrine, B., & Gordon, T. (septembre 2009). RTM process simulation and optimization of composite fan blades reinforced by 3D woven fabrics [Communication écrite]. Joint American Society for Composites/Association for Composite Structure and Materials Conference, Newark, Delaware. Non disponible
Verreman, Y., & Guo, H. (juillet 2009). Short cracks at notches and fatigue life prediction [Communication écrite]. 12th International Conference on Fracture, Ottawa, Ontario. Non disponible
Viau, J. L., Baptiste, P., & Mascle, C. (novembre 2009). Airframe dismantling optimization for aerospace aluminum valorization [Communication écrite]. IEEE International Symposium on Assembly and Manufacturing (ISAM 2009), Suwon, Korea. Lien externe
Vidal, D., Ridgway, C., Pianet, G., Schoelkopf, J., Roy, R., & Bertrand, F. (août 2008). Effect of particle size distribution and packing compression on fluid permeability : A comparison of experiments and Monte-Carlo/Lattice-Boltzmann simulations [Communication écrite]. Fundamental and Applied Pulp & Paper Modelling Symposium, Trois-Rivières, Québec. Non disponible
Villalpando, F., Reggio, M., & Ilinca, A. (mai 2009). Numerical simulation over clean and iced wind turbine blades [Communication écrite]. 17th Annual Conference of the CFD Society of Canada, Ottawa, Canada. Non disponible
Villalpando, F., Reggio, M., & Ilinca, A. (septembre 2009). Turbulent flow simulation over ice-accreted wind turbine blades [Communication écrite]. CanWEA 2009 : infinite possibilities. The 25th annual CanWEA conference and exhibition, Toronto, Ont.. Non disponible
Vu, V. H., Thomas, M., Lakis, A. A., & Marcouiller, L. (mai 2009). Online monitoring of varying modal parameters by operating modal analysis and model updating [Communication écrite]. 2nd International Conference on Industrial Risk Engineering (CIRI 2009), Reims, France (19 pages). Lien externe
Vu, V. H., Thomas, M., Lakis, A. A., & Marcouiller, L. (juillet 2009). Operational modal analysis by short time autoregressive modeling [Communication écrite]. 3rd International Conference on Integrity, Reliability & Failure (IRF 2009), Porto, Portugal. Non disponible
Vu, V. H., Thomas, M., Lakis, A. A., & Marcouiller, L. (octobre 2009). Software for operational modal analysis and automatic identification of modal parameters [Communication écrite]. 27th Seminar on Machinery Vibration (CMVA 2009), Vancouver, B.C. (16 pages). Lien externe
Wang, X., & Baron, L. (mai 2009). Topological synthesis of translational parallel manipulators [Communication écrite]. Canadian Committee for the Theory of Machines and Mechanisms Symposium (CCToMM M3), Québec, Québec. Publié dans Transactions of the Canadian Society for Mechanical Engineering, 33(4). Lien externe
Wang, X., Aubin, C.-É., Labelle, H., & Crandall, D. (juillet 2009). Biomechanical comparison of two instrumentation techniques: rod derotation vs. direct incremental segmental translation [Communication écrite]. 16th International Meeting on Advanced Spine Techniques (IMAST 2009), Vienna, Austria. Lien externe
Wang, X., Aubin, C.-É., Labelle, H., & Crandall, D. (novembre 2009). Rod derotation vs. direct incremental segmental translation: a biomechanical analysis [Communication écrite]. 24th Annual Meeting of the North American Spine Society (NASS 2009), San Francisco, Calif.. Non disponible
Wozniak, A., & Mayer, J. R. R. (octobre 2009). Corrected measured point validity check in coordinate metrology [Communication écrite]. 24th Annual Meeting of the American Society for Precision Engineering (ASPE 2009), Monterey, CA, United states. Non disponible
Zhang, X., Boukas, E.-K., & Baron, L. (août 2009). Design of stabilizing controllers for high order feedforward nonlinear systems with delayed input [Communication écrite]. 7th Asian Control Conference, Hong Kong, China. Lien externe
Adouni, M. B. A. (2009). Biomécanique de joint du genou durant l'application des exercices à chaîne cinétique fermée (CKC) [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Beaudette, P.-L. (2009). Personnalisation des propriétés mécaniques des tissus mous du fessier humain par méthodes d'éléments finis et expérimentations In Vivo. [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Boushel, C. (2009). Conception et développement d'un système d'acquisition et de contrôle à distance pour la fabrication de matériaux composites [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Chagnon, A. (2009). Étude biomécanique de la dégénérescence du disque intervertébral à l'aide d'un modèle éléments finis poroélastique. [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Chapuis, S. (2009). Stockage thermique saisonnier dans un champ de puits géothermiques verticaux en boucle fermée. [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Dubé, R. (2009). Développement d'un système d'injection pour la fabrication des composites. [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
El Ouaaid, Z. (2009). Modélisation de la colonne vertébrale par la méthode des éléments finis basée sur la cinématique incluant le critère de la stabilité [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Farah, E. (2009). Modèle constitutif du comportement viscoplastique d'un matériau CFC [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Gammacurta, É. (2009). Analyse de sensibilité d'écoulements turbulents instationnaires [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Gosse, J. (2009). Optimisation des stocks par la prévision des ventes [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Guiassa, R. (2009). Compensation des erreurs d'usinage par le processus intermittent d'inspection [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Guiet, J. (2009). Développement d'un algorithme de simulation en dynamique des fluides basé sur la méthode de Boltzman sur réseau [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Jetté, M.-A. (2009). Caractérisation et mise en forme de matériaux composites intrinsèquement amortis [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Lapointe, F. (2009). Modélisation de la viscosité de mélanges de poudres métalliques utilisés pour le moulage par injection de poudres métalliques [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Lavoie, M. (2009). Caractérisation et modélisation d'un véhicule tout terrain et de ses tampons d'ancrages faits d'élastomères. [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Leclaire, S. (2009). Simulation numérique des fluides avec la méthode de Boltzmann sur réseau utilisant le krigeage des gradients [Mémoire de maîtrise, École Polytechnique de Montréal]. Non disponible
Lourdel, N. (2009). Développement d'un banc d'essai pour la détermination des paramètres de la loi de comportement d'un filament d'encre viscoélastique [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Lozeau, M. (2009). Commande par supervision de systèmes mécatroniques via internet [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Manac'H, P.-E. (2009). Simulation et optimisation de la fabrication de pièces composites par injection sur renforts (procédé RTM) [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Melot, M. (2009). Modélisation numérique du transfert radiatif par la méthode des volumes finis dans les disjoncteurs à SF6 [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Rafkani, Y. (2009). Investigation des limites des contrôles non destructifs par ultrasons et par radar sur le béton [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Rousseau, B. (2009). Isotrope des manipulateurs parallèles à nacelle articulée de classe H4 [Mémoire de maîtrise, École Polytechnique de Montréal]. Non disponible
Sainmont, C. (2009). Optimisation d'une aile d'avion à profil adaptable : étude numérique et expérimentale [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Sevrain, A. (2009). Étude biomécanique des mécanismes de progression du spondylolisthésis. [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
St-Amand, É. (2009). Méthodes de runge-kutta implicites pour la résolution d'équations de convection-diffusion en régime instationnaire [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Ste-Marie, M. (2009). Étude et modélisation du frittage de pièces moulées par injection de poudres métalliques d'acier inoxydable et de superalliage de nickel [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Achim, V. (2009). Simulation pour l'aide à l'optimisation et fabrication intelligente des composites par injections sous renfort [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Aminollahi, K. (2009). Fuzzy model-based predictive temperature control for nitriding furnace [Thèse de doctorat, École Polytechnique de Montréal]. Accès restreint
Dominique, S. (2009). Algorithme intelligent d'optimisation d'un design structurel de grande envergure [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Ekinci, T. O. (2009). Modélisation des erreurs machines selon le principe de causalité [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Esmailzadeh Kandjani, M. (2009). Random vibration of a curved structure subjected to a turbulent flow [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Huo, L. G. (2009). Robotic joint-motion optimization of functionally-redundant tasks for joint-limits and singularity avoidance [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Kang, H. S. (2009). Annular-flow-induced vibrations of a simply-supported cylinder in a finite-length narrow-gap support [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Kuhn, M. (2009). Direct-write microfabrication and characterization of single-chamber micro solid oxide fuel cells with coplanar electrodes [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Laberge Lebel, L. (2009). Fabrication de structures tridimensionnelles de nanocomposites polymères chargés de nanotubes de carbone à simple paroi [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Qin, Z. (2009). Dynamic identification of robotic manipulators using accelerometer measurements [Thèse de doctorat, École Polytechnique de Montréal]. Accès restreint
Sabri, F. (2009). Aeroelastic analysis of circular cylindrical and truncated conical shells subjected to a supersonic flow [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Slamani, M. (2009). Modélisation des erreurs géométriques et dynamiques pour prédire et compenser les erreurs volumétriques des machines-outils à cinq axes (applications fraisage orbital) [Thèse de doctorat, École Polytechnique de Montréal]. Non disponible
Thomassin, J. (2009). Modélisation des vibrations asynchrones d'aubes de compresseurs axiaux par la résonance de l'écoulement de jeu [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
De Guise, J. A., Yahia, L., Duval, N., Hagemeister, N., Parent, G., St-Onge, N., Koller, A., Anguelov, B., & El Maach, I. (2009). Method of calibration for the representation of knee kinematics and harness for use therewith. (Brevet no US7481780). Lien externe
Laberge Lebel, L., Therriault, D., El-Khakani, M. A., & Aissa, B. (2009). Methods for preparing freeform three-dimensional structures. (Demande de brevet no US20090101278). Lien externe
Boukas, E.-K. (2009). Models for production and maintenance planning in stochastic manufacturing systems. Dans Handbook of Maintenance Management and Engineering (p. 263-299). Lien externe
Yahia, L., Rayes, F., & Warrak, A. O. (2009). Regulation, orthopedic, dental, endovascular and other applications of Ti-Ni shape memory alloys. Dans Shape Memory Alloys for Biomedical Applications (p. 306-326). Lien externe
