 | Monter d'un niveau |
Abderrafai, Y. (2022). Fabrication additive de composites à hautes performances mécaniques et thermomécaniques par fabrication de filament fondu : formulation, procédés et caractérisation [Thèse de doctorat, Polytechnique Montréal]. Disponible
Abderrafai, Y., Hadi Mahdavi, M., Sosa-Rey, F., Herard, C., Otero Navas, I., Piccirelli, N., Lévesque, M., & Therriault, D. (2022). Additive manufacturing of short carbon fiber-reinforced polyamide composites by fused filament fabrication: Formulation, manufacturing and characterization. Materials and Design, 214, 11 pages. Lien externe
Abderrefai, Y., Diouf Lewis, A., Farahani, R. D., Navas, I. O., Lévesque, M., & Therriault, D. (2022). Objective 1: Design and formulate different HTRT materials (PEI or PEEK) reinforced with carbon fibers. (Rapport technique). Non disponible
Absi, C., Alsinani, N., & Laberge Lebel, L. (2022). Carbon fiber reinforced poly(ether ether ketone) rivets for fastening composite structures. Composite Structures, 280, 114877 (13 pages). Lien externe
Ahmadfard, M., & Bernier, M. (2022). Thermal response factors for vertical ground heat exchangers. ASHRAE Journal, 64(1), 14-20. Non disponible
Al Handawi, K., & Kokkolaras, M. (2022). Optimization of Infectious Disease Prevention and Control Policies Using Artificial Life. IEEE Transactions on Emerging Topics in Computational Intelligence, 6(1), 26-40. Lien externe
Alameddine, T. (2022). Building on Existing District Energy Infrastructure to Decarbonize a Growing Urban Neighborhood [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Alsinani, N. (2022). Pultrusion of Natural Fiber-Reinforced Composites Injection molding assisted [Thèse de doctorat, Polytechnique Montréal]. Disponible
Alsinani, N., & Laberge Lebel, L. (2022). Effect of Flax/PP pellets' morphology on the mechanical properties of injection-molded parts. Journal of Thermoplastic Composite Materials, 36(7), 3041-3065. Lien externe
Alsinani, N., & Laberge Lebel, L. (2022). Effect of high pulling speeds on the morphologies of pultrudates in a thermoplastic pultrusion process. Journal of Thermoplastic Composite Materials, 36(9), 3566-3584. Lien externe
Alyaldin, L. (2022). Modelling Fluidelastic Instability in a normal triangular tube array subjected to single-phase and two-phase cross flows [Thèse de doctorat, Polytechnique Montréal]. Disponible
Alyaldin, L., & Mureithi, N. W. (2022). Equivalent Theodorsen Function for Fluidelastic Excitation in a Normal Triangular Array. Journal of Pressure Vessel Technology, Transactions of the ASME, 144(6), 10 pages. Lien externe
Assi, P., Achiche, S., & Laberge Lebel, L. (septembre 2022). Horngear and carrier design for 3D-braiding of tailorable composite preforms [Présentation]. Dans Texcomp 2022, Kyoto, Japan. Non disponible
Audet, C., Batailly, A., & Kojtych, S. (2022). Escaping Unknown Discontinuous Regions in Blackbox Optimization. SIAM Journal on Optimization, 32(3), 1843-1870. Lien externe
Barbeau, L., Étienne, S., Béguin, C., & Blais, B. (2022). Development of a high-order continuous Galerkin sharp-interface immersed boundary method and its application to incompressible flow problems. Computers & Fluids, 239, 13 pages. Lien externe
Bastien, J. (2022). Conception et optimisation de mécanismes compliants pour la locomotion et la saisie [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Batmaz, R., Zardoshtian, A., Sabiston, T. D., Tangestani, R., Chakraborty, A., Krutz, N., Pendurti, S., Natarajan, A., & Martin, É. (2022). Correction to: An Investigation into Sinterability Improvements of 316L Binder Jet Printed Parts (vol 53, pg 915, 2022). Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 53(5), 1919-1919. Lien externe
Batmaz, R., Zardoshtian, A., Sabiston, T. D., Tangestani, R., Chakraborty, A., Krutz, N., Pendurti, S., Natarajan, A., & Martin, É. (2022). An Investigation into Sinterability Improvements of 316L Binder Jet Printed Parts. Metallurgical and Materials Transactions A, 53(3), 915-926. Lien externe
Beauséjour, M., Aubin, D., Fortin, C., N'dongo Sangaré, M., Carignan, M., Roy-Beaudry, M., Martinez, C., Bourassa, N., Jourdain, N., Labelle, P., & Labelle, H. (2022). Parents can reliably and accurately detect trunk asymmetry using an inclinometer smartphone app. BMC Musculoskeletal Disorders, 23(1), 8 pages. Lien externe
Beglarzadeh, B. (2022). Metrology of Machine Tool Compliance under Quasi-Static Condition [Thèse de doctorat, Polytechnique Montréal]. Disponible
Beglarzadeh, B., Mayer, J. R. R., & Archenti, A. (2022). Estimation of an elasto-geometric model exploiting a loaded circular test on a machine tool. International Journal of Advanced Manufacturing Technology, 123(7-8), 2331-2349. Lien externe
Ben-Youssef, Y., Kerboua, Y., & Lakis, A. A. (2022). Analysis of nonlinear vibrations of thin cylindrical shells subjected to supersonic flow. Thin-Walled Structures, 173, 108969 (17 pages). Lien externe
Bernaoui, A., Lebrun, G., & Ruiz, E. (2022). High performance natural fiber composites from mat and UD flax reinforcements backed with a mat Binder: A study of mat fiber surface fibrillation. Composites Part A: Applied Science and Manufacturing, 160, 107064 (14 pages). Lien externe
Bernard, G. (2022). Condition-Based Monitoring Using Artificial Intelligence on Real-Time Machining of Aeronautics Parts [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Bernier, N. (2022). Optimisation d'une stratégie de gestion de la demande de puissance en utilisant différentes sources de stockage thermique dans un agrégat de bâtiments [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Berthelin, S. (2022). Étude de méthodes d'intégration temporelle basées sur des schémas de corrections différées d'ordres élevés et A-stables [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Bertrand, D., Kavaseri, K., Villemure, I., Rauch, F., Hamdy, R., & Willie, B. (octobre 2021). The Accordion Technique Applied During the Consolidation Phase Does Not Improve Healing Compared to Conventional Distraction Osteogenesis [Résumé]. Annual Meeting of the American Society for Bone and Mineral Research (ASBMR), San Diego, California, USA (1 page). Publié dans Journal of Bone and Mineral Research, 37(S1). Lien externe
Bienvenue, C., & Hébert, A. (2022). High-order diamond differencing schemes for the Boltzmann Fokker-Planck equation in 1D and 2D Cartesian geometries. Annals of Nuclear Energy, 171, 109032 (14 pages). Lien externe
Biette, G. (2022). Caractérisation expérimentale des interactions et de la coalescence entre deux bulles d'air dans de l'eau du robinet stagnante [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Billotte, C. (2022). Optimisation et valorisation du noir de carbone de la pyrolyse des pneus usés dans un composite polymère pour une application en climat tropical [Thèse de doctorat, Polytechnique Montréal]. Disponible
Bilodeau-Bérubé, C., Blanchet, M., & Laurendeau, É. (juin 2022). Comparison of a correlation-based transitional model coupled to SA and kw-SST turbulence models [Communication écrite]. AIAA AVIATION 2022 Forum, Chicago, Illinois, USA. Lien externe
Blanchet, M. (2022). Modeling of Transitional Flows on Roughened Surfaces for Icing Applications [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Blanchet, M., Bourgault-Cote, S., & Laurendeau, É. (juin 2022). Conservative hyperbolic droplet solver for aircraft icing [Communication écrite]. AIAA AVIATION 2022 Forum, Chicago, Illinois, USA. Lien externe
Bonnet, B., Tabiai, I., Rakovich, G., Gosselin, F., & Villemure, I. (2022). Air leaks: Stapling affects porcine lungs biomechanics. Journal of the Mechanical Behavior of Biomedical Materials, 125, 104883 (15 pages). Lien externe
Boroumand, M. (2022). Assessment and Modification of Novel Counter-Rotating Centrifugal Compressor Concept for Transonic Speeds [Thèse de doctorat, Polytechnique Montréal]. Disponible
Boulvert, J., Humbert, T., Romero-Garcia, V., Gabard, G., Fotsing, E.-R., Ross, A., Mardjono, J., & Groby, J.-P. (2022). Perfect, broadband, and sub-wavelength absorption with asymmetric absorbers: Realization for duct acoustics with 3D printed porous resonators. Journal of Sound and Vibration, 523, 116687 (21 pages). Lien externe
Bourgault, Y., & Garon, A. (2022). Variable-step deferred correction methods based on backward differentiation formulae for ordinary differential equations. BIT Numerical Mathematics, 62(4), 1789-1822. Lien externe
Bourgault-Cote, S., Papillon Laroche, H., Blanchet, M., & Laurendeau, É. (juin 2022). Contribution to IPW1 by studying multi-layer icing convergence in 2D/2.5D [Communication écrite]. AIAA AVIATION 2022 Forum, Chicago, Illinois, USA. Lien externe
Bouscarrat, D., Calvat, M., Vieille, B., & Lévesque, M. (juin 2022). Analyses of time-dependent damage within carbon woven-ply reinforced thermoplastic composites laminates at high temperature [Communication écrite]. 20th European Conference on Composite Materials: Composites Meet Sustainability (ECCM 2022), Lausanne, Switzerland. Lien externe
Braymand, M. (2022). Développement d'une procédure de compensation géométrique d'outillage pour la fabrication de pièces composites à renforts tressés par infusion sous vide [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Burlet-Vienney, D., Galy, B., Bertrand, K. C., Beaugrand, S., Gonella, M., & Ledoux, É. (2022). Analysis of Vehicle Stability When Using Two-Post Above-Ground Automotive Lifts: Support Pad Slippage. Safety, 8(3), 58 (18 pages). Disponible
Camara, M. (2022). Infiltration de particules et de fluide dans des micro-treillis acoustiques intégrés dans une turbosoufflante [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Cardin, G. B., Rivest, D., Ayad, T., Robert, É., Rahal, A., & Christopoulos, A. (2022). Quantification and visualization of aerosols in ear, nose, and throat exam and flexible laryngoscopy. Laryngoscope Investigative Otolaryngology, 7(4), 963-969. Lien externe
Celce, M. (2022). Simulation et implémentation d'accostage autonome de multicoptère sur paroi verticale [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Chaikho, L., Clark, E., & Raison, M. (2022). Transcutaneous Functional Electrical Stimulation Controlled by a System of Sensors for the Lower Limbs: A Systematic Review. Sensors, 22(24), 25 pages. Lien externe
Chakhari, J., Nasraoui, M. T., Mrad, C., & Khalfi, B. (2022). Design and Modeling of Piezoelectric Energy Harvester Under Variable Pressure in Pipe Flow. Iranian Journal of Science and Technology-Transactions of Mechanical Engineering, 47(2), 513-526. Lien externe
Chakraborty, A., Tangestani, R., Muhammad, W., Sabiston, T., Masse, J.-P., Batmaz, R., Wessman, A., & Martin, É. (2022). Micro-cracking mechanism of RENE 108 thin-wall components built by laser powder bed fusion additive manufacturing. Materials Today Communications, 30, 103139 (14 pages). Lien externe
Chakraborty, A., Tangestani, R., Sabiston, T., Krutz, N., Yuan, L., & Martin, É. (février 2022). Effect of Build Height on Micro-cracking of Additively Manufactured Superalloy RENÉ 108 Thin-Wall Components [Communication écrite]. 151st TMS Meeting & Exhibition - Supplemental Proceedings (TMS 2022), Anaheim, California, USA. Lien externe
Chartray-Pronovost, M. (2022). Design and Validation of a Hydrogen Peroxide Vapour Decontamination System [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Chauvette, J.-F., Hia, I. L., Farahani, R. D., & Therriault, D. (2022). Objective 4: Develop a printing process for direct deposition of acoustic abradable materials on composite structures featuring flat and curved geometries. (Rapport technique). Non disponible
Chavez Gomez, P. (2022). Small-Scale Fire Resistance Evaluation of Carbon Fibers and their Composites [Thèse de doctorat, Polytechnique Montréal]. Disponible
Chavez-Gomez, P., Pelzmann, T., Hall, D. R., Chilian, C., Laberge Lebel, L., & Robert, É. (2022). Carbon fiber damage evolution under flame attack and the role of impurities. Fire and Materials, 47(2), 226-240. Lien externe
Chávez-Gómez, P., Pelzmann, T., Zahlawi, J., Laberge Lebel, L., & Robert, É. (2022). Carbon fiber oxidation in combustion environments—Effect of flame chemistry and load on bundle failure. Materials Today Communications, 31, 103560. Lien externe
Choudhary, R., Rzig, I., Fotsing, E. R., & Ross, A. (juillet 2022). Investigation of the effect of piezoelectric material nonlinearity on unimorph energy harvester [Communication écrite]. 28th International Congress on Sound and Vibration (ICSV 2022), Singapore. Non disponible
Chu, D., Lessard, D., Laymouna, M. A., Engler, K., Schuster, T., Ma, Y., Kronfli, N., Routy, J.-P., Hijal, T., Lacombe, K., Sheehan, N., Rougier, H., & Lebouché, B. (2022). Understanding the Risks and Benefits of a Patient Portal Configured for HIV Care: Patient and Healthcare Professional Perspectives. Journal of Personalized Medicine, 12(2), 14 pages. Lien externe
Cimmino, M., & Cook, J. C. (décembre 2022). Pygfunction 2.2 : new features and improvements in accuracy and computational efficiency [Communication écrite]. International Ground Source Heat Pump Association annual Conference, Las vegas, NV, USA. Lien externe
Coiffard, F. (2022). Conception de la commande et de la téléopération d'un bras robotique ultraléger intégré sur un drone [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Colaïtis, Y., & Batailly, A. (2022). Stability analysis of an industrial blade accounting for a blade-tip/casing nonlinear interface. Journal of Engineering for Gas Turbines and Power, 145(4), 32 pages. Lien externe
Colaitis, Y., & Batailly, A. (juin 2022). Stability Analysis of an Industrial Blade Accounting for a Blade-Tip/Casing Nonlinear Interface [Communication écrite]. ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition (GT 2022), Rotterdam, Netherlands (12 pages). Lien externe
Colaitis, Y., & Batailly, A. (2022). Stability analysis of periodic solutions computed for blade-tip/casing contact problems. Journal of Sound and Vibration, 538, 117219 (25 pages). Lien externe
Cossin, M., Bergeron-Parenteau, A., & Ross, A. (2022). Maximal dynamic forces exerted by acrobats on nine circus apparatuses. Circus: Arts, Life, and Sciences, 1(1). Disponible
Costa Baptista, J. (2022). Développement, optimisation et fabrication par dépôt de matière fondue de structures absorbantes de bruit [Thèse de doctorat, Polytechnique Montréal]. Disponible
Costa-Baptista, J., Fotsing, E. R., Mardjano, J., Therriault, D., & Ross, A. (juillet 2022). Multilayered microchannels for high absorption at different frequency ranges [Communication écrite]. 28th International Congress on Sound and Vibration (ICSV 2022). Non disponible
Costa-Baptista, J., Fotsing, E.-R., Mardjono, J., Therriault, D., & Ross, A. (2022). Design and fused filament fabrication of multilayered microchannels for subwavelength and broadband sound absorption. Additive Manufacturing, 55, 102777 (17 pages). Disponible
Coulombe, C., Saussié, D., & Achiche, S. (2022). Modeling and gain-scheduled control of an aerial manipulator. International Journal of Dynamics and Control, 10(1), 217-229. Lien externe
Daareyni, A., Baghani, M., Ghezelbash, F., & Zakerzadeh, M. R. (2022). Data-driven modeling of an elastomer bushing system under various visco-hyperelastic deformations. Computational Materials Science, 214, 111710 (11 pages). Lien externe
Dammak, H., Versailles, P., & Vo, H. D. (2022). Coupled High Pressure-Temperature Effects on Performance of Dielectric Barrier Discharge Actuators. AIAA Journal, 60(6), 3917-3922. Lien externe
Darwish, S. (2022). Fluidelastic Instability Study of a Rotated Square Array Subjected to Single and Two-Phase Cross-Flow [Thèse de doctorat, Polytechnique Montréal]. Disponible
Darwish, S., Hadji, A., Pham, H. P., Mureithi, N. W., & Cho, M. (2022). Flow-Induced Vibrations of a Rotated Square Tube Array Subjected to Single-Phase Cross-Flow. Journal of Pressure Vessel Technology, Transactions of the ASME, 144(4), 14 pages. Lien externe
de Chambure, L., Raison, M., & Clark, E. (juillet 2022). Movements Decomposition of Upper Limbs Complex Sequences for Rehabilitation Sessions Optimization [Affiche]. RehabWeek 2022, Rotterdam, The Netherlands. Lien externe
De Cicco, D., Yaghoobi, H., & Taheri, F. (2022). Development of practical semi-empirically and statistically-based equations for predicting the static and dynamic buckling capacities of 3D fibre-metal laminates. Thin-Walled Structures, 170, 108520 (12 pages). Lien externe
De Holanda Sousa, R. (2022). Modélisation multiphysique des disjoncteurs à haute-tension avec le couplage entre les méthodes des frontières immergées et des maillages superposés [Thèse de doctorat, Polytechnique Montréal]. Disponible
De la Torre, L. (2022). Simulation of the Vibratory Peening Process [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Decouvelaere, R., Trépanier, M., & Agard, B. (2022). Modulated spatiotemporal clustering of smart card users. Public Transport, 24 pages. Lien externe
Delhez, E. (2022). Reduced-order modeling of mistuned bladed disks with geometric and contact nonlinearities [Thèse de doctorat, Polytechnique Montréal]. Disponible
Delhez, E., Nyssen, F., Golinval, J.-C., & Batailly, A. (août 2022). Reduced order modeling of cyclically symmetric bladed disks with geometric and contact nonlinearities [Communication écrite]. 15th World Congress on Computational Mechanics (WCCM 2022) & 8th Asia Pacific Congress on Computational Mechanics (APCOM 2022), Yokohama, Japan. Lien externe
Demenois, M. (2022). The Pipe Conveying Fluid as a Model Experiment to Develop a Digital Twin [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Deng, J. (2022). Étude expérimentale des interactions entre deux particules sphériques, relâchées dans l'eau stagnante [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Diouf Lewis, A., Farahani, R. D., Iervolino, F., Pierre, J., Abderrafai, Y., Lévesque, M., Piccirelli, N., & Therriault, D. (2022). Design and characterization of carbon fiber-reinforced PEEK/PEI blends for Fused Filament Fabrication additive manufacturing. Materials Today Communications, 31, 103445. Disponible
Dréau, J. (2022). Développement de méthodes numériques pour la conception robuste d'aubes de moteurs d'avion [Thèse de doctorat, Polytechnique Montréal]. Disponible
Dréau, J., Magnain, B., & Batailly, A. (août 2022). Multi-element polynomial chaos with automatic discontinuity detection for nonlinear systems [Communication écrite]. 15th World Congress on Computational Mechanics (WCCM 2022) & 8th Asia Pacific Congress on Computational Mechanics (APCOM 2022), Yokohama, Japan. Lien externe
Duarte, M. P., Aubin, C.-É., Cobetto, N., Roy-Beaudry, M., Bellefleur, C., Turgeon, I., Labelle, H., Guy, A., Barchi, S., & Parent, S. (2022). 3D Radiological Outcomes and Quality of Life of Patients with Moderate Idiopathic Scoliosis Treated with Anterior Vertebral Growth Modulation vs Bracing: 2-Year Follow-up. Spine, 47(15), 1063-1070. Lien externe
Dussault, A., Pitaru, A. A., Weber, M. H., Haglund, L., Rosenzweig, D. H., & Villemure, I. (2022). Optimizing design parameters of PLA 3D-printed scaffolds for bone defect repair. Surgeries, 3(3), 162-174. Lien externe
Ebrahimkhani, M., Arjmand, N., & Shirazi-Adl, A. (2022). Adjacent segments biomechanics following lumbar fusion surgery: a musculoskeletal finite element model study. European Spine Journal, 31(7), 1630-1639. Lien externe
Fan, L., Vena, P., Savard, B., & Fond, B. (2022). Experimental and numerical investigation on the accuracy of phosphor particle streak velocimetry. Experiments in Fluids, 63, 20 pages. Lien externe
Farahani, R. D., Lévesque, M., & Therriault, D. (2022). Advanced manufacturing of composites for structural and acoustic applications. (Rapport technique). Non disponible
Farjam, S., & Savard, B. (2022). Ignition and flame stabilization of n -dodecane turbulent premixed flames under Spray A thermochemical conditions. Combustion and Flame, 242, 112133 (19 pages). Lien externe
Fattahi, K., Robert, É., & Boffito, D. C. (2022). Numerical and experimental investigation of the cavitation field in horn-type sonochemical reactors. Chemical Engineering and Processing-Process Intensification, 182, 109186 (12 pages). Lien externe
Faucheux, P. A., Miao, H. Y., Lévesque, M., & Gosselin, F. (2022). Peen forming and stress peen forming of rectangular 2024-T3 aluminium sheets: Curvatures, natural curvatures and residual stresses. Strain, 58(2), e12405 (24 pages). Lien externe
Favretti, I. (2022). Simulations numériques d'essais expérimentaux de contact aube/carter [Mémoire de maîtrise, Polytechnique Montréal]. Accès restreint
Frih, I., Tu, G., Ma, Y., Achiche, S., Laymouna, M. A., Chehab, M., Thériault, L., Lemire, B., Nait El Haj, M., & Lebouché, B. (juillet 2022). Lessons learned from the development and implementation of MARVIN : a bilingual artificial intelligence Chatbot for people living with HIV [Affiche]. 24th International AIDS Conference (AIDS 2022), Montreal, Canada, and virtually. Lien externe
Gad-el-Hak, I., & Mureithi, N. W. (2022). Mitigation of jet cross-flow induced vibrations using an innovative biomimetic nozzle design inspired by shark gill geometry. Scientific Reports, 12(1), 11 pages. Lien externe
Gad-el-Hak, I., Mureithi, N. W., & Karazis, K. (octobre 2022). Evaluation of fuel rod response using principal component analysis [Communication écrite]. ASME 2022 International Mechanical Engineering Congress and Exposition (IMECE 2022), Columbus, OH, USA (7 pages). Lien externe
Gad-el-Hak, I., Mureithi, N. W., Karazis, K., & Williams, G. (2022). Jet cross-flow induced vibrations in rod bundles, Part II: Transverse vibration results and excitation mechanisms. Nuclear Engineering and Design, 400, 12 pages. Lien externe
Gadelhak, I. A. I. (2022). Fluidelastic Excitation of a Fuel Rod Bundle Subjected to Combined Axial-Flow and Jet Cross-Flow [Thèse de doctorat, Polytechnique Montréal]. Disponible
Gagnon, M. (2022). Development of a Parallel 3D Solid-Solid Overset RANS Method [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Gamdani, F., Boukhili, R., & Vadean, A. (2022). Fatigue behavior of hybrid multi-bolted-bonded single-lap joints in woven composite plates. International Journal of Fatigue, 158, 10 pages. Lien externe
Garon, A., & Delfour, M. C. (2022). Transfinite Interpolations and Eulerian/Lagrangian Dynamics. Lien externe
Gaudet, G. (2022). Development of a Multibody Model for Quantification of Muscle Forces at Upper Limb as a Design Tool for Exoskeleton Synthesis [Thèse de doctorat, Polytechnique Montréal]. Disponible
Gauvin, R., & Chibani, M. (2022). The Modelling of Mold Filling in Resin Transfer Molding. International Polymer Processing, 1(1), 42-46. Lien externe
Ghasemi, M., Curnier, D., Caru, M., Trépanier, J.-Y., & Périé-Curnier, D. (2022). The effect of different aero handlebar positions on aerodynamic and gas exchange variables. Journal of Biomechanics, 139, 111128 (9 pages). Lien externe
Ghazi-Hesami, S., Wise, D., Taylor, K., Ireland, P., & Robert, É. (2022). Heat Transfer And Pressure Drop Of An Angled Discrete Turbulator At Elevated Reynolds Numbers Up To 900,000. Journal of Thermal Science and Engineering Applications, 14(7), 29 pages. Lien externe
Ghazi-Hesami, S., Wise, D., Taylor, K., Robert, É., & Ireland, P. (2022). Heat Transfer Coefficient Distribution of W and Broken W Turbulators At High Reynolds Numbers. Journal of Thermal Science and Engineering Applications, 14(7), 29 pages. Lien externe
Ghezelbash, F., Liu, S., Shirazi-Adl, A., & Li, J. (2022). Blood clot behaves as a poro-visco-elastic material. Journal of the Mechanical Behavior of Biomedical Materials, 128, 8 pages. Lien externe
Ghezelbash, F., Shirazi-Adl, A., Gagnon, D., Shahvarpour, A., Arjmand, N., Eskandari, A. H., & Lariviere, C. (2022). Submaximal electromyography-driven musculoskeletal modeling of the human trunk during static tasks: Equilibrium and stability analyses. Journal of Electromyography and Kinesiology, 65, 102664 (10 pages). Lien externe
Ghorbani, H. (2022). 3D Scanning-Based Inspection and Repair Geometry Generation for Remanufacturing of Damaged Aeroengine Blades [Thèse de doctorat, Polytechnique Montréal]. Disponible
Ghorbani, H., & Khameneifar, F. (2022). Construction of damage-free digital twin of damaged aero-engine blades for repair volume generation in remanufacturing. Robotics and Computer-Integrated Manufacturing, 77, 16 pages. Lien externe
Ghorbani, H., & Khameneifar, F. (juillet 2020). Scan-to-CAD alignment of damaged airfoil blade point clouds through geometric dissimilarity assessment [Communication écrite]. 15th CIRP Conference on Intelligent Computation in Manufacturing Engineering (CIRP ICME 2021), Gulf of Naples, Italy (5 pages). Publié dans Procedia CIRP, 112. Disponible
Gopal, P., Gesta, A., & Mohebbi, A. (2022). A Systematic Study on Electromyography-Based Hand Gesture Recognition for Assistive Robots Using Deep Learning and Machine Learning Models. Sensors, 22(10), 13 pages. Lien externe
Gosselin, F., Zou, S., & Therriault, D. (juillet 2022). Bioinspired transparent impact-absorbing composite made with a fluid mechanical instability [Communication écrite]. 12th Canadian-International Conference on Composites (CANCOM 2022), Fredericton and Moncton, Canada. Non disponible
Goupil, V., Gaya, C., Boisard, A., & Robert, É. (2022). Effect of the heating rate on the degassing and combustion of cylindrical Li-Ion cells. Fire Safety Journal, 133, 103648 (12 pages). Lien externe
Gourcerol, E. (2022). Nickel Coated Carbon Fibre Nonwoven as Light, Efficient and Scalable Lightning Strike Protection for Carbon Fibre Reinforced Polymers [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Gratton, M.-P., Londono, I., Rompré, P., Villemure, I., Moldovan, F., & Nishio, C. (2022). Effect of vitamin D on bone morphometry and stability of orthodontic tooth movement in rats. American Journal of Orthodontics and Dentofacial Orthopedics, 162(6), e319-e327. Lien externe
Gregorio, P. (2022). Developing a Custom Printhead Controller to Print Large-Scale Parts Using Industrial Motion Systems [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Grivas, T. B., Negrini, S., Aubin, C.-É., Aulisa, A. G., De Mauroy, J. C., Donzelli, S., Hresko, M. T., Kotwicki, T., Lou, E., Maruyama, T., Parent, E. C., Rigo, M., Thometz, J. G., Wong, M.-S., & Zaina, F. (2022). Nonoperative management of adolescent idiopathic scoliosis (AIS) using braces. Prosthetics and Orthotics International, 46(4), 383-391. Lien externe
Grofti, Z., Croteau-Labouly, B., Boukhili, R., Causse, P., Belouettar, S., Perrin, H., & Trochu, F. (2022). Simultaneous characterization of preform expansion and permeability in vacuum assisted resin infusion. Polymer Composites, 43(6), 3560-3573. Lien externe
Gu, X., Vo, H. D., Mureithi, N. W., & Laurendeau, É. (2022). Plasma gurney flap flight control at low angle of attack. Journal of Aircraft, 60(1), 172-189. Lien externe
Guy, A., Coulombe, M., Labelle, H., Rigo, M., Wong, M.-S., Beygi, B. H., Wynne, J., Hresko, M. T., Ebermeyer, E., Vedreine, P., Liu, X.-C., Thometz, J. G., Bissonnette, B., Sapaly, C., Barchi, S., & Aubin, C.-É. (2022). Biomechanical effects of thoracolumbosacral orthosis design features on 3D correction in adolescent idiopathic scoliosis a comprehensive multicenter study. Spine, 47(15), 1103-1110. Lien externe
Harandizadeh Najafabadi, D. (2022). Characterization of the Effect of Hydrogen Embrittlement on the Fatigue Crack Propagation Behaviour of AISI 415 Martensitic Stainless Steel [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Hesabi, H., Jung, T., Nourelfath, M., & Achiche, S. (août 2022). Fault Diagnosis of Power Transformers Based on Machine Learning Approaches [Communication écrite]. 32nd European Safety and Reliability Conference (ESREL 2022), Dublin, Ireland. Lien externe
Ho, M. (2022). Modélisation d'écoulements de mélanges gazeux en régime raréfié par la méthode de Boltzmann sur réseau [Thèse de doctorat, Polytechnique Montréal]. Disponible
Ho, M., Ammar, S., Leclaire, S., Reggio, M., & Trépanier, J.-Y. (2022). Comparative study of multicomponent Lattice Boltzmann models for binary mixture flows. International Journal of Modern Physics C, 33(03), 2250034 (24 pages). Lien externe
Ho, M., Ammar, S., Leclaire, S., Reggio, M., & Trépanier, J.-Y. (2022). Lattice Boltzmann Modeling of Miscible Multicomponent Gas Mixtures in the Rarefied Regime. Communications in Computational Physics, 32(4), 1179-1216. Lien externe
Imbert, A. (2022). Étalonnage de systèmes bi-robots par entraînement de réseaux de neurones [Mémoire de maîtrise, Polytechnique Montréal]. Accès restreint
Jadayel, M., & Khameneifar, F. (juin 2022). 3D scan data-based shape compensation using graph U-Nets to correct the systematic geometric errors of additive manufacturing parts [Affiche]. 5th Holistic Innovation in Additive Manufacturing Conference (HI-AM 2022), Montréal, Québec. Lien externe
Jamshidi, M., Chatelain, J.-F., Rimpault, X., & Balazinski, M. (2022). Tool condition monitoring based on the fractal analysis of current and cutting force signals during CFRP trimming. International Journal of Advanced Manufacturing Technology, 121(11-12), 8127-8142. Lien externe
Jamshidi, M., Chatelain, J.-F., Rimpault, X., & Balazinski, M. (2022). Tool Condition Monitoring Using Machine Tool Spindle Electric Current and Multiscale Analysis while Milling Steel Alloy. Journal of Manufacturing and Materials Processing, 6(5), 115 (12 pages). Lien externe
Jobin, O., Mottillo, C., Titi, H. M., Marrett, J. M., Arhangelskis, M., Rogers, R. D., Elzein, B., Friscic, T., & Robert, É. (2022). Metal-organic frameworks as hypergolic additives for hybrid rockets. Chemical Science, 13(12), 3424-3436. Lien externe
Kamalizadeh, S., Niknam, S. A., Balazinski, M., & Turenne, S. (2022). The Use of TOPSIS Method for Multi-Objective Optimization in Milling Ti-MMC. Metals, 12(11), 18 pages. Lien externe
Kojtych, S. (2022). Contributions à l'optimisation de systèmes mécaniques non réguliers : reconception d'aubes de compresseur [Thèse de doctorat, Polytechnique Montréal]. Disponible
Kojtych, S., Nyssen, F., Audet, C., & Batailly, A. (juin 2022). Methodology for the Redesign of Compressor Blades Undergoing Nonlinear Structural Interactions: Application to Blade-Tip/Casing Contacts [Communication écrite]. ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition (GT 2022), Rotterdam, Netherlands (12 pages). Lien externe
Kuthe, S., Schlothauer, A., Bodkhe, S., Hulme, C., & Ermanni, P. (2022). 3D printed mechanically representative aortic model made of gelatin fiber reinforced silicone composite. Materials Letters, 320, 4 pages. Lien externe
Laberge Lebel, L., Assi, P., Stefan Talos, C., Villeneuve, G., Chabot, O., Bousquet, P., & Delisle, V. (2022). Braiding machines and carriers for braiding machines. (Demande de brevet no US20220106716). Lien externe
Laberge Lebel, L., Chavez Gomez, P. J., Richer, A., Robert, É., & Hamp, J. (2022). Fire protection structure. [Structure de protection contre les incendies]. (Demande de brevet no US20220282672). Lien externe
Laliberté-Riverin, S., & Brochu, M. (2022). A novel approach for quantifying hydrogen embrittlement using side-grooved CT samples. Engineering Fracture Mechanics, 265, 108324 (14 pages). Lien externe
Langot, J., Chávez‐Gómez, P., Lévesque, M., & Robert, É. (2022). Modeling the thermal decomposition and residual mass of a carbon fiber epoxy matrix composite with a phenomenological approach: Effect of the reaction scheme. Fire and Materials, 46(1), 262-276. Disponible
Langot, J., Gourcerol, E., Serbescu, A., Brassard, D., Chizari, K., Lapalme, M., Desautels, A., Sirois, F., & Therriault, D. (octobre 2022). A comparative study on the performance of nickel-based technologies for lightning strike protection of composite aircraft [Communication écrite]. 36th International Conference on Lightning Protection (ICLP 2022), Cape Town, South Africa. Lien externe
Lavigueur, C. (2022). Improving Greenhouse Modelling in Building Performance Simulation Tools [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Lavigueur, C., & Kummert, M. (juin 2022). Hygrothermal component models for greenhouse simulation in TRNSYS [Communication écrite]. 12th Conference of IBPSA-Canada (eSIM 2022), Ottawa, ON, Canada (8 pages). Lien externe
Lavoie, P., Radenac, E., Blanchard, G., Laurendeau, É., & Villedieu, P. (2022). Immersed Boundary Methodology for Multistep Ice Accretion Using a Level Set. Journal of Aircraft, 59(4), 912-926. Lien externe
Le Gentil, T., Therriault, D., & Kerbrat, O. (juin 2022). Energy efficiency-oriented decision-making for additive manufacturing with carbon-fibre-reinforced polyamide 12 [Communication écrite]. 20th European Conference on Composite Materials: Composites Meet Sustainability (ECCM 2022), Lausanne, Switzerland. Lien externe
Leleu, G. (2022). Fabrication de composites à matrice céramique par infiltration de barbotines [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Lennox, M. D., Hosseini Rad, S., Therriault, D., Favis, B. D., & Tavares, J. R. (2022). Submicron Poly(vinyl acetate) Emulsion Preparation via Ultrasonication: Progress toward Oil-in-Water Binder-Jet Printing Binders. Industrial & Engineering Chemistry Research, 61(35), 13294-13297. Lien externe
Lessard, D., Engler, K., Ma, Y., Rodriguez Cruz, A., Vicente, S., Kronfli, N., Barkati, S., Brouillette, M.-J., Cox, J., Kildea, J., Hijal, T., Pomey, M.-P., Bartlett, S. J., Asselah, J., & Lebouché, B. (2022). Remote follow-up of self-isolating COVID-19 patients with a patient portal: Protocol for a mixed-method pilot study (the Opal-COVID study). JMIR Res Protoc, 18(11). Lien externe
Lessard, F. (2022). Développement d'un système de pultrusion thermoplastique multi-filière pour production de pièces d'intérieur d'aéronef [Thèse de doctorat, Polytechnique Montréal]. Disponible
Lessard, F., Dubé, M., & Laberge Lebel, L. (2022). A comprehensive model of the deconsolidation behaviour of unidirectional carbon fibre reinforced thermoplastic composites. Composites Part a-Applied Science and Manufacturing, 163, 107176 (12 pages). Lien externe
Lessard, F., Dubé, M., & Laberge Lebel, L. (2022). A model of multi-die thermoplastic pultrusion. Composites Part B-Engineering, 247, 110319 (12 pages). Lien externe
Li, P. L. (2022). Support à la conception d'exosquelettes motorisés d'assistance du membre supérieur multitâches [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Li, R., Satchwell, A. J., Finn, D., Christensen, T. H., Kummert, M., Le Dréau, J., Lopes, R. A., Madsen, H., Salom, J., Henze, G., & Wittchen, K. (2022). Ten questions concerning energy flexibility in buildings. Building and Environment, 223, 109461 (12 pages). Lien externe
Lingua, A., Piccirelli, N., Therriault, D., & Lévesque, M. (2022). In-situ full-field measurements for 3D printed polymers during mode I interface failure. Engineering Fracture Mechanics, 269, 108483 (14 pages). Lien externe
Lingua, A., Piccirelli, N., Therriault, D., & Lévesque, M. (2022). Supplementary material for 'In-situ full-field measurements for 3D printed polymers during mode I interface failure' [Ensemble de données]. Lien externe
Lingua, A., Picirelli, N., Therriault, D., & Lévesque, M. (juin 2022). In-situ full-field measurements for 3D printed composites under interlayer delamination [Communication écrite]. 20th European Conference on Composite Materials: Composites Meet Sustainability (ECCM 2022), Lausanne, Switzerland. Lien externe
Lopez Poncelas, M. (2022). Modélisation Biomécanique de la correction Sagittale du Rachis : application pour réduire les risques de défaillances jonctionnelles proximales [Thèse de doctorat, Polytechnique Montréal]. Disponible
Lopez Poncelas, M., La Barbera, L., Rawlinson, J. J., Crandall, D., & Aubin, C.-É. (2022). Credibility assessment of patient-specific biomechanical models to investigate proximal junctional failure in clinical cases with adult spine deformity using ASME V&V40 standard. Computer Methods in Biomechanics and Biomedical Engineering, 25(5), 543-553. Lien externe
Ma, Y., Achiche, S., & Lebouché, B. (juin 2022). Development of a Chatbot for HIV patients using Participatory Design [Présentation]. Dans Virtual Conference +Tradeshow (HEALTH 2022). Non disponible
Ma, Y., Engler, K., Vincente, S., Achiche, S., Lemire, B., Rodrigez Cruz, A., Thériault, L., Soussou, S., Régazzoni, B., Tu, G., Nait Ei Haj, M., de Pokomandy, A., Cox, J., Zahedi Niaki, N., & Lebouché, B. (avril 2022). Utilisabilité et acceptabilité d'un Chatbot basé sur l'intelligence artificielle pour faciliter l'autogestion des antirétroviraux chez les personnes vivant avec le VIH [Affiche]. 11ème conférence internationale francophone de Alliance francophone des acteurs de santé contre le VIH et les infections virales chroniques ou émergentes (AFRAVIH 2022), Marseille, France. Lien externe
Ma, Y., Engler, K., Vincente, S., Achiche, S., Lemire, B., Rodrigez Cruz, A., Thériault, L., Soussou, S., Régazzoni, B., Tu, G., Nait Ei Haj, M., de Polomandy, A., Cox, J., Zahedi Niaki, N., & Lebouché, B. (avril 2022). Usability and acceptability of an artificial intelligence-based Chatbot to facilitate antiretroviral self-management in people living with HIV [Présentation]. Dans 31st annual Canadian Conference on HIV/AIDS Research (CAHR 2022). Non disponible
Ma, Y., Tu, G., Laymouna, M. A., Achiche, S., Frih, I., Chehab, M., Thériault, L., Lemire, B., Nait Ei Haj, M., & Lebouché, B. (mai 2022). Développement d'un Chatbot pour soutenir l'autogestion chez les personnes vivant avec le VIH en temps de pandémie [Présentation]. Dans 89e congrès de l'ACFAS. Lien externe
Ma, Y., Vincente, S., Engler, K., Achiche, S., Thériault, L., Lemire, B., Tu, G., Frih, I., Nait El Haj, M., Laymouna, M. A., de Polomandy, A., Cox, J., & Lebouché, B. (octobre 2022). An artificial intelligence-based Chatbot aimed at promoting HIV self-management : quantitative results of a mixed-method usability study [Affiche]. Fast-Track Cities 2022, Seville, Spain. Non disponible
Makani, A. (2022). Computational Musculoskeletal Finite Element Model Studies of a Knee Joint during Stair Ascent [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Makani, A., Shirazi-Adl, A., & Ghezelbash, F. (2022). Computational biomechanics of human knee joint in stair ascent: Muscle-ligament-contact forces and comparison with level walking. International Journal for Numerical Methods in Biomedical Engineering, 38(11), e3646 (29 pages). Lien externe
Marcil-St-Onge, G. (2022). Étude de l'infiltration de particules dans une texture fibreuse pour un procédé de mise en œuvre de composites à matrice céramique [Thèse de doctorat, Polytechnique Montréal]. Disponible
Massin, J., & Birglen, L. (mai 2022). Analysis of the Walking Chair from Tokyo Institute of Technology with Screw Theory [Communication écrite]. 2nd USCToMM Symposium on Mechanical Systems and Robotics (USCToMM MSR 2022), Rapid City, SD. Lien externe
Mechta, A., Slamani, M., Zaoui, M., Mayer, J. R. R., & Chatelain, J.-F. (2022). Correlation assessment and modeling of intra-axis errors of prismatic axes for CNC machine tools. International Journal of Advanced Manufacturing Technology, 120(7-8), 5093-5115. Lien externe
Mehrabian, M. (2022). Investigation on Multi-Bolted/Bonded Single-lap Composite Joints via 3D Digital Image Correlation (DIC) Technology [Thèse de doctorat, Polytechnique Montréal]. Disponible
Mehrabian, M., & Boukhili, R. (2022). Full-field through-the-thickness strain distribution study of hybrid multi-bolted/bonded single-lap composite joints using digital image correlation. Composites Part a-Applied Science and Manufacturing, 163, 107242 (11 pages). Lien externe
Mélançon, D., & Pasini, D. (octobre 2022). 3d-printing metal is hard : the role of manufacturing imperfections in the design of high-strength porous biomaterials to replace bone tissue [Communication écrite]. 3rd International Workshop on Reliability and Design of Additively Manufactured Materials (RdAMM2 2022), Belgrade, Serbia. Non disponible
Merabet, R., & Laurendeau, É. (2022). Numerical simulations of a rotor in confined areas including the presence of wind. Aerospace Science and Technology, 126, 107657 (18 pages). Lien externe
Miao, H. Y., Lévesque, M., & Gosselin, F. (2022). Shot peen forming pattern optimization to achieve cylindrical and saddle target shapes: The inverse problem. CIRP Journal of Manufacturing Science and Technology, 36, 67-77. Lien externe
Moeini Gharagozlo, M. R. (2022). Stiffness Optimization of a honeycomb foot orthotic [Thèse de doctorat, Polytechnique Montréal]. Disponible
Moeini, M., Begon, M., & Lévesque, M. (2022). Numerical homogenization of a linearly elastic honeycomb lattice structure and with and results. Mechanics of Materials, 167, 104210 (17 pages). Lien externe
Moeini, M., Menard, A.-L., Yue, L., Hajizadeh, M., Begon, M., & Lévesque, M. (2022). Computationally efficient model to predict the deformations of a cellular foot orthotic. Computers in Biology and Medicine, 146, 105532 (16 pages). Lien externe
Mohebbi, A., Amiri, P., & Kearney, R. E. (2022). Identification of human balance control responses to visual inputs using virtual reality. Journal of Neurophysiology, 127(4), 1159-1170. Lien externe
Montazerijouybari, M. (2022). Dynamics of Differential Drive Wheel Mobile Robot with Free Caster Wheels [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Monticeli, F. M., Almeida, J. H. S., Neves, R. M., Ornaghi, H. L., & Trochu, F. (2022). The influence of fabric architecture on impregnation behavior and void formation: Artificial neural network and statistical-based analysis. Polymer Composites, 43(5), 2812-2823. Lien externe
Mouaze, N., & Birglen, L. (2022). Bistable compliant underactuated gripper for the gentle grasp of soft objects. Mechanism and Machine Theory, 170, 104676 (17 pages). Lien externe
Muhammad, W., Batmaz, R., Natarajan, A., & Martin, É. (2022). Effect of binder jetting microstructure variability on low cycle fatigue behavior of 316L. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 839, 142820 (12 pages). Lien externe
Musavi, S. H., Sepehrikia, M., Davoodi, B., & Niknam, S. A. (2022). Performance analysis of developed micro-textured cutting tool in machining aluminum alloy 7075-T6: assessment of tool wear and surface roughness. International Journal of Advanced Manufacturing Technology, 119(5-6), 3343-3362. Lien externe
Musavi, Z., Zhang, Y., Robert, É., & Engvall, K. (2022). Experimental and numerical investigation of flow field and soot particle size distribution of methane-containing gas mixtures in a swirling burner. ACS Omega, 7(1), 469-479. Lien externe
Naceur, A., Famulari, G., Bienvenue, C., Carrier, J.-F., & Hébert, A. (2022). Impacts of Nuclear-Reactor-Physics Models for Secondary Photons on Coupled Photon-Electron-Positron Transport Problems. Physical Review Applied, 18(5), 17 pages. Lien externe
Namvar, M., & Leclaire, S. (2022). Simple lattice Boltzmann method algorithm with low memory usage. Journal of Computational Science, 62, 18 pages. Lien externe
Neale, A., Kummert, M., & Bernier, M. (2022). Development of a bottom-up white-box building stock energy model for single-family dwellings. Journal of Building Performance Simulation, 15(6), 735-756. Disponible
Neale, A., Kummert, M., & Bernier, M. (2022). Discriminant analysis classification of residential electricity smart meter data. Energy & Buildings, 258, 111823 (18 pages). Disponible
Ngoc, H. V., Mayer, J. R. R., & Bitar-Nehme, E. (2022). Deep learning LSTM for predicting thermally induced geometric errors using rotary axes powers as input parameters. CIRP Journal of Manufacturing Science and Technology, 37, 70-80. Lien externe
Niknam, H., Akbarzadeh, A., Therriault, D., & Bodkhe, S. (juillet 2022). Additively manufactured thermally bistable structures [Communication écrite]. 12th Canadian-International Conference on Composites (CANCOM 2022), Fredericton and Moncton, Canada. Lien externe
Niknam, H., Akbarzadeh, A., Therriault, D., & Bodkhe, S. (2022). Tunable thermally bistable multi-material structure. Applied Materials Today, 28, 101529 (14 pages). Disponible
Ning, B., Londono, I., Laporte, C., & Villemure, I. (2022). Validation of an in vivo micro-CT-based method to quantify longitudinal bone growth of pubertal rats. Bone, 154, 116207 (10 pages). Lien externe
Noel, A., & Cimmino, M. (décembre 2022). Development of a topology optimization method for the design of ground heat exchangers [Communication écrite]. International Ground Source Heat Pump Association annual Conference, Las vegas, NV, USA. Lien externe
Nyssen, F., Colaitis, Y., & Batailly, A. (2022). Numerical investigation of a mistuned industrial bladed disk dynamics with structural contacts using time and frequency methods. Journal of Sound and Vibration, 535, 117077 (18 pages). Lien externe
Papillon Laroche, H. (2022). Stochastic Ice Accretion Model for Aircraft Icing [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Parent, A., Ballaz, L., Samadi, B., Vocos, M., Comtois, A. S., & Pouliot-Laforte, A. (2022). Static Postural Control Deficits in Adults with Myotonic Dystrophy Type 1, Steinert Disease. Journal of Neuromuscular Diseases, 9(2), 311-320. Lien externe
Pelzmann, T. (2022). Composite Aircraft Engine Fire Walls : a Small-Scale Experimental Testbed to study Thermomechanical Degradation under Fire [Thèse de doctorat, Polytechnique Montréal]. Disponible
Pelzmann, T., & Robert, É. (2022). Dataset of temperature, heat flux and infrared emission from flat premixed laminar methane-air flames. Data in Brief, 42, 9 pages. Lien externe
Pelzmann, T., & Robert, É. (2022). Thermal, optical and chemcial dataset of flat premixed Laminar CH4/air standard flames [Ensemble de données]. Lien externe
Peng, W., Zhang, Y., Laurendeau, É., & Desmarais, M. C. (2022). Learning aerodynamics with neural network. Scientific Reports, 12(1), 6779 (10 pages). Lien externe
Picard-Krashevski, G. (2022). Conception d'un système intelligent d'ouverture de portes par l'asservissement d'un bras robotique d'assistance sur fauteuil roulant [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Pierre, J., Chenier, G., Farahani, R. D., & Therriault, D. (2022). Objective 3: Additive manufacturing of acoustic sandwich panels using the materials developed in O1. (Rapport technique). Non disponible
Pike, A., & Kummert, M. (septembre 2021). District heating: a practical solution for reducing fossil fuel dependency in Quebec's remote communities [Communication écrite]. 17th IBPSA Conference on Building Simulation (BS 2021), Bruges, Belgium. Lien externe
Plante, F., & Laurendeau, É. (juin 2022). CHAMPS Contributions to the Fourth High Lift Prediction Workshop [Communication écrite]. AIAA AVIATION Forum, Chicago, IL, USA. Lien externe
Plante, F., & Laurendeau, É. (juin 2021). Matrix-free global stability analysis framework for 2D and 3D applications [Communication écrite]. AIAA AVIATION 2022 Forum, Chicago, Illinois, USA. Lien externe
Pomerantz, T. (2022). Développement d'une solution d'étalonnage automatique d'un robot industriel de réparation de pièces aéronautiques [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Prieto Chavez, C. J. (2022). Analytical Modelling of full-time-scale heat transfer in ground heat exchangers [Thèse de doctorat, Polytechnique Montréal]. Disponible
Prieto, C., & Cimmino, M. (2022). Semi-analytical method for 3D transient heat transfer in thermally interacting fields of ground heat exchangers. Thermo, 2(3), 171-199. Lien externe
Prieto, C., & Cimmino, M. (décembre 2022). Transient heat transfer in ground heat exchangers under groundwater flow [Communication écrite]. International Ground Source Heat Pump Association annual Conference, Las vegas, NV, USA. Lien externe
Proulx-Cabana, V., Nguyen, M. T., Prothin, S., Michon, G., & Laurendeau, É. (2022). A hybrid non-linear unsteady vortex lattice-vortex particle method for rotor blades aerodynamic simulations. Fluids, 7(2), 30 pages. Lien externe
Raballand, C., Cobetto, N., Larson, A. N., & Aubin, C.-É. (2022). Prediction of post-operative adding-on or compensatory lumbar curve correction after anterior vertebral body tethering. Spine Deformity, 11(1), 27-33. Lien externe
Rafiee, M., Granier, F., Tao, R., Bherer-Constant, A., Chenier, G., & Therriault, D. (2022). Multi-material, multi-Process, planar, and nonplanar additive manufacturing of piezoelectric devices. Advanced Engineering Materials, 24(10), 2200294 (9 pages). Disponible
Raison, M. (mai 2022). Robotics and artificial intelligence: a combination at the service of humans [Présentation]. Dans 12th International Conference on Integrated Design and Production, Rabat, Morocco. Non disponible
Raynaud, G., Houde, S., & Gosselin, F. (2022). ModalPINN: An extension of physics-informed Neural Networks with enforced truncated Fourier decomposition for periodic flow reconstruction using a limited number of imperfect sensors. Journal of Computational Physics, 464, 18 pages. Lien externe
Rigaud, M., & Poirier, J. (mars 2022). Refractories from fire to fire [Communication écrite]. 17th Unified International Technical Conference on Refractories (UNITECR 2022), Chicago, IL, USA. Publié dans International Journal of Ceramic Engineering & Science, 4(2). Disponible
Rochefort-Beaudoin, T., Vadean, A., Gamache, J.-F., & Achiche, S. (août 2022). Comparative study of first-order moving asymptotes optimizers for the moving morphable components topology optimization framework [Communication écrite]. ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (DETC 2022), St. Louis, MO, USA. Lien externe
Roorda, S., Clancy, P., Bellemare, J., & Laliberte-Riverin, S. (2022). Exploring the use of neutrons to detect hydrogen embrittlement in high strength steel. Journal of Neutron Research, 24(1), 23-32. Lien externe
Saada, A. (2022). Étude de la fabrication de géométries élémentaires de pièces de turboréacteur en composite SiC/SiC par injection/filtration de barbotine [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Sabbagh, G. (2022). Amélioration des prévisions des conditions du sol dans le dimensionnement des échangeurs géothermiques [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Sabbagh, G., & Bernier, M. (décembre 2022). Climate change effects on the energy performance of a residential ground-source heat pump system [Communication écrite]. International Ground Source Heat Pump Association annual Conference, Las vegas, NV, USA. Lien externe
Schlachter, D. A., Lennox, M. D., Favis, B. D., Therriault, D., & Tavares, J. R. (2022). Physicochemical Limitations of Capillary Models Applied to High- Concentration Polymer Solutions. ACS Omega, 7(7), 5636-5645. Lien externe
Selwanis, M. M., Franzini, G. R., Béguin, C., & Gosselin, F. (2022). How a ball free to orbit in a circular track mitigates the galloping of a square prism. Nonlinear Dynamics, 111(1), 179-197. Lien externe
Selwanis, M. M., Franzini, G. R., Béguin, C., & Gosselin, F. (2022). Multi-ball rotative nonlinear energy sink for galloping mitigation. Journal of Sound and Vibration, 526, 8 pages. Lien externe
Sepahi-Boroujeni, S., Mayer, J. R. R., & Khameneifar, F. (juillet 2020). Prompt uncertainty estimation with GUM framework for on-machine tool coordinate metrology [Communication écrite]. 14th CIRP Conference on Intelligent Computation in Manufacturing Engineering (CIRP ICME 2021), Gulf of Naples, Italy. Publié dans Procedia CIRP, 112. Disponible
Serbescu, A. (2022). Development and Manufacturing of Silver-based Conductive Materials for Lightning Strike Protection of Aircraft Composite Structures [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Serbescu, A., Brassard, D., Langot, J., Gourcerol, E., Chizari, K., Lapalme, M., Desautels, A., Sirois, F., & Therriault, D. (octobre 2022). Silver-based conductive materials for lightning strike protection of aircraft composite structures [Communication écrite]. 36th International Conference on Lightning Protection (ICLP 2022), Cape Town, South Africa. Lien externe
Siguerdidjane, W. (2022). Closed-loop Automation of Shot Peen Forming with In-process Shape Measurements [Thèse de doctorat, Polytechnique Montréal]. Disponible
Siguerdidjane, W., Khameneifar, F., & Gosselin, F. (2022). Closed-loop shot peen forming with in-process measurement and optimization. CIRP Journal of Manufacturing Science and Technology, 38, 500-508. Lien externe
Siguerdidjane, W., Khameneifar, F., & Gosselin, F. (2022). A low-cost open-source automated shot peen forming system. HardwareX, 11, e00263 (13 pages). Lien externe
Singhal, M. (2022). Experimental Investigation of Controlled Single and Multiple Impacts of Shot Peening on Titanium Ti-6A1-4V Alloy, 300M Steel and Aluminium Alloy 7050-T7451 [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Slamani, F., Thibault, D., Verreman, Y., & Bocher, P. (2022). A new morphology of retained austenite obtained by intercritical tempering of 13Cr-4Ni martensitic stainless steel. Materials Characterization, 193, 19 pages. Lien externe
Sosa Rey, F., Lingua, A., Lampron, O., Lévesque, M., & Therriault, D. (2022). Objective 2: Predict mechanical response of AM composites. (Rapport technique). Non disponible
Sosa-Rey, F., Abderrafai, Y., Diouf Lewis, A., Therriault, D., Piccirelli, N., & Lévesque, M. (2022). OpenFiberSeg : open-source segmentation of individual fibers and porosity in tomographic scans of additively manufactured short fiber reinforced composites. Composites Science and Technology, 226, 109497 (13 pages). Disponible
Sosa-Rey, F., Abderrafai, Y., Diouf Lewis, A., Therriault, D., Piccirelli, N., & Lévesque, M. (2022). OpenFiberSeg: Open-source segmentation of individual fibers and porosity in tomographic scans of additively manufactured short fiber reinforced composites. Composites Science and Technology, 226, 109497 (13 pages). Disponible
Strugala, G., Kummert, M., & Kegel, M. (2022). Empirical modelling of variable capacity air-to-air heat pumps in trnsys. Journal of Building Performance Simulation, 15(5), 616-633. Lien externe
Sun, Y., Béguin, C., Causse, P., Benmokrane, B., & Trochu, F. (2022). Convective Heat Transfer Between a Bead Packing and Its Bounding Wall: Part I—Theory. Transport in Porous Media, 143(2), 397-416. Lien externe
Sun, Y., Béguin, C., Causse, P., Benmokrane, B., & Trochu, F. (2022). Convective Heat Transfer Between a Bead Packing and Its Bounding Wall: Part II-Numerical Analysis and Experimental Validation. Transport in Porous Media, 143(1), 1-22. Lien externe
Sun, Y., Béguin, C., Causse, P., Benmokrane, B., & Trochu, F. (2022). Experimental and numerical investigation of wall temperature in a heated pipe filled with beads. International Journal of Heat and Mass Transfer, 192, 13 pages. Lien externe
Sun, Y., Causse, P., & Trochu, F. (2022). Closure to "Permeability Measurement of Granular Porous Materials by a Modified Falling-Head Method" by Yixun Sun, Philippe Causse, Brahim Benmokrane, and Francois Trochu. Journal of Engineering Mechanics, 148(3), 07022002 (2 pages). Lien externe
Sushitskii, V. (2022). Non-Euclidean plate theory for the Simulation, Optimization and Automation of shot peen forming [Thèse de doctorat, Polytechnique Montréal]. Disponible
Sved Teja, S. (2022). Développement d'un algorithme numérique monolithique de pseudo-concentration avec une méthode d'éléments finis adaptative pour les écoulements diphasiques en 2D [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Tabone, L., Rivest, D., Levy, A., Buyck, M., Jouvet, P., Aubin, C.-É., François, T., Robert, É., & Baudin, F. (2022). Prevention of submicron aerosolized particle dispersion: evaluation of an aerosol box using a pediatric simulation model. Experimental Lung Research, 48(9-10), 266-274. Lien externe
Taghizadeh, M., Taghizadeh, A., Yazdi, M. K., Zarrintaj, P., Stadler, F. J., Ramsey, J. D., Habibzadeh, S., Rad, S. H., Naderi, G., Saeb, M. R., Mozafari, M., & Schubert, U. S. (2022). Chitosan-based inks for 3D printing and bioprinting. Green Chemistry, 24(1), 62-101. Lien externe
Talos, C. S. (2022). Développement d'un débobineur asservi sans-fil pour le tressage de composites textiles [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Talos, C. S., Achiche, S., & Laberge Lebel, L. (septembre 2022). Automated braiding carriers for industry 4.0 [Présentation]. Dans Texcomp 2022, Kyoto, Japan. Non disponible
Talos, C. S., Achiche, S., & Laberge Lebel, L. (juillet 2022). Characterization of the yarn tension evolution generated by braiding carriers [Présentation]. Dans Canadian-International Conference on Composites (CANCOM 2022), Fredericton/Moncton, N.-B.. Non disponible
Tan, X. W., Joukhadar, N., Leduc, S., Aubin, C.-É., Hupin, M., & Nault, M.-L. (2022). Outcome of retroarticular drilling for osteochondritis dissecans of the talus in a pediatric population. Foot and Ankle Surgery, 28(5), 628-634. Lien externe
Tao, R. (2022). Multi-Material Three-Dimensional Printing of Piezoelectric Devices for Sensing and Energy Harvesting Applications [Thèse de doctorat, Polytechnique Montréal]. Disponible
Tao, R., Granier, F., & Therriault, D. (2022). Multi-material freeform 3D printing of flexible piezoelectric composite sensors using a supporting fluid. Additive Manufacturing, 60, 103243 (11 pages). Lien externe
Tao, R., Shi, J., Granier, F., Moeini, M., Akbarzadeh, A., & Therriault, D. (2022). Multi-material fused filament fabrication of flexible 3D piezoelectric nanocomposite lattices for pressure sensing and energy harvesting applications. Applied Materials Today, 29, 10 pages. Lien externe
Tao, R., Shi, J., Rafiee, M., Akbarzadeh, A., & Therriault, D. (2022). Fused filament fabrication of PVDF films for piezoelectric sensing and energy harvesting applications. Materials Advances, 3(12), 4851-4860. Disponible
Testoni, O., Christen, S., Bodkhe, S., Bergamini, A., & Ermanni, P. (2022). A novel concept of modular shape-adaptable sandwich panel with distributed actuation based on shape memory alloys. Journal of Intelligent Material Systems and Structures, 33(11), 1439-1448. Lien externe
Tonellato, G., & Kummert, M. (novembre 2022). Regional-scale typical meteorological years for building stock modelling [Communication écrite]. 3rd uSim Conference of IBPSA-Scotland (uSIM 2022), Glasgow, Scotland (9 pages). Lien externe
Tonellato, G., Beaudry, G., Kummert, M., Pasquier, P., & Candanedo, J. A. (décembre 2022). Control strategy evaluation framework for ground source heat pumps using standing column wells [Communication écrite]. International Ground Source Heat Pump Association annual Conference, Las vegas, NV, USA. Lien externe
Topolnitskiy, E., Chekalkin, T., Marchenko, E., Yasenchuk, Y., Kang, J.-H., & Yahia, L. (mai 2022). Combination of solid and porous nitinol implants in surgical treatment of extensive post-excision thoracic defects in cancer patients [Communication écrite]. International Conference on Shape Memory and Superelastic Technologies (SMST 2022), Carlsbad, CA, USA. Lien externe
Tran, Y., Pelletier-Roy, R., Merle, G., Aubin, C.-É., & Nault, M.-L. (2022). Subchondroplasty in the treatment of bone Marrow lesion in early Knee Osteoarthritis: A systematic review of clinical and radiological outcomes. KNEE, 39, 279-290. Lien externe
Tremblay, N., Cohender, P., Cyr, G., Manent, M., Simon, L., Faure, M.-P., & Aubin, C.-É. (2022). Living labs and innovation commons in healthcare ecosystems : the casse of the TransMedTech Institute in Montréal. Dans Opens labs and innovation management : the dynamics of communities and ecosystems (p. 187-208). Lien externe
Trochu, F., Vernet, N., Sun, Y., Echaabi, J., Makradi, A., & Belouettar, S. (2022). Hybrid twin models of fiber compaction for composite manufacturing based on dual kriging. International Journal of Material Forming, 15(3), 20 pages. Lien externe
Trochu, F., Yang, B., Wang, J., Béguin, C., & Causse, P. (juin 2022). Creation of digital material twin (dmt) geometric models of high performance composites based on x-ray microtomography [Communication écrite]. 20th European Conference on Composite Materials: Composites Meet Sustainability (ECCM 2022), Lausanne, Switzerland. Lien externe
Trofimov, A., Le Pavic, J., Pautard, S., Therriault, D., & Lévesque, M. (2022). Experimentally validated modeling of the temperature distribution and the distortion during the Fused Filament Fabrication process. Additive Manufacturing, 54, 102693 (17 pages). Disponible
Trofimov, A., Toloup, C., Lévesque, M., & Therriault, D. (2022). Supplementary Objective 1: 3D reinforced composites manufactured by Resin Transfer Molding (RTM). (Rapport technique). Non disponible
Tucny, J.-M., Spreutels, L., Drolet, F., Leclaire, S., Bertrand, F., & Vidal, D. (2022). Impact of fiber diameter polydispersity on the permeability of fibrous media. Chemical Engineering Science, 262, 117984 (12 pages). Lien externe
Tucny, J.-M., Vidal, D., Leclaire, S., & Bertrand, F. (juillet 2022). Investigation on the validity of a rarefied gas flow model based on the LBM as an extended Navier-Stokes equation solver for porous media [Présentation]. Dans 32nd International Symposium on Rarefied Gas Dynamics (RGD 2022), Seoul, Korea, South. Non disponible
Tucny, J.-M., Vidal, D., Leclaire, S., & Bertrand, F. (2022). Kinetic Slip Boundary Condition for Isothermal Rarefied Gas Flows through Static Non-Planar Geometries Based on the Regularized Lattice-Boltzmann Method. Communications in Computational Physics, 31(3), 816-868. Lien externe
Turcot, G. (2022). Development of a Spherical Indentation Inverse Methodology to Estimate Bulk Tensile Properties of Metals for Applications to Welds [Thèse de doctorat, Polytechnique Montréal]. Disponible
Vadcard, T., Batailly, A., & Thouverez, F. (2022). On harmonic balance method-based Lagrangian contact formulations for vibro-impact problems. Journal of Sound and Vibration, 531, 116950 (26 pages). Lien externe
Vadcard, T., Colaïtis, Y., Batailly, A., & Thouverez, F. (2022). Assessment of two harmonic balance method-based numerical strategies for blade-tip/casing interactions: Application to Nasa Rotor67. Journal of Engineering for Gas Turbines and Power, 144(12), 12 pages. Lien externe
Vadcard, T., Colaitis, Y., Batailly, A., & Thouverez, F. (juin 2022). Assessment of Two Harmonic Balance Method-Based Numerical Strategies for Blade-Tip/Casing Interactions: Application to NASA Rotor67 [Communication écrite]. ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition (GT 2022), Rotterdam, Netherlands (12 pages). Lien externe
Vadean, A., Abusrea, M., Shazly, M., Michel, A., Kaabi, A., & Boukhili, R. (2022). Improvement of scarf repair patch shape for composite aircraft structures. Journal of Adhesion Science and Technology, 99(6), 1044-1070. Lien externe
Vanroy, K. (2022). Developing a Prototype Building Energy Model for a Quebec Primary School and Assessing the Importance of Detailed HVAC System Modeling [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Viviescas, G., & Bernier, M. (décembre 2022). Ground heat exchanger performance with variable speed ground-source heat pumps [Communication écrite]. International Ground Source Heat Pump Association annual Conference, Las vegas, NV, USA. Lien externe
Wang, X., & Caloz, C. (2022). Pseudorandom Sequence (Space-) Time-Modulated Metasurfaces: Principles, Operations, and Applications. IEEE Antennas and Propagation Magazine, 64(4), 2-11. Lien externe
Wang, X., Aubin, C.-É., Armstrong, R., & Rawlinson, J. (2022). How do additional rods reduce loads on the primary rods in adult spinal instrumentation with pedicle subtraction osteotomy? Clinical Biomechanics, 93, 7 pages. Lien externe
Widmer, J., Aubin, C.-É., van Lenthe, G. H., & Matsukawa, K. (2022). Editorial: Innovations to improve screw fixation in traumatology and orthopedic surgery. Frontiers in Bioengineering and Biotechnology, 10, 1094813 (3 pages). Lien externe
Yang, B., Huang, W., Causse, P., Béguin, C., Wang, J., & Trochu, F. (2022). On the design of test molds based on unidirectional saturated flows to measure transverse permeability in liquid composite molding. Polymer Composites, 43(4), 2234-2251. Lien externe
Yassine, S., Laliberté-Riverin, S., Mena Morcillo, E., Cova, M., Brochu, M., & Mauzeroll, J. (mai 2022). Effect of the microstructure on the corrosion and fatigue behavior of the additively manufactured M789 stainless steel [Communication écrite]. 241st ECS meeting, Vancouver, Canada. Publié dans ECS Meeting Abstracts, MA2022-01(16). Lien externe
Yue, L. (2022). A Numerical Predictive Tool for Long-term Properties of Thermoplastics under Complex Operating Conditions [Thèse de doctorat, Polytechnique Montréal]. Disponible
Yue, L., Heuzey, M.-C., Jalbert, J., & Lévesque, M. (2022). On the parameters identification of three-dimensional aging-temperature-dependent viscoelastic solids through a Bayesian approach. Mechanics of Time-Dependent Materials, 23 pages. Lien externe
Yue, L., Jalbert, J., Heuzey, M.-C., & Lévesque, M. (2022). On the strain measurement for thermoplastics with bi-axial extensometer in thermo-mechanical testing: A case of characterizing temperature and physical aging effects on polycarbonate. Experimental Mechanics, 62(9), 1691-1699. Lien externe
Zhang, C., Wang, C.-S., Therriault, D., & Heuzey, M.-C. (2022). Development of aqueous protein/polysaccharide mixture-based inks for 3D printing towards food applications. Food Hydrocolloids, 131, 107742 (10 pages). Disponible
Zhang, T., Wang, H., Peng, C., Chen, Z., & Wang, X. (2022). C-Band Linear Polarization Metasurface Converter with Arbitrary Polarization Rotation Angle Based on Notched Circular Patches. Crystals, 12(11), 13 pages. Lien externe
