![]() | Up a level |
Abbad, A., Lassoued, M.-A. B., Michon, G., & Ross, A. (2019, July). On the use of 3D printed architected core in sandwich structure for vibration control [Paper]. 26th International Congress on Sound and Vibration (ICSV 2019), Montréal, Qc, Canada. Unavailable
Abderrefai, Y., Diouf Lewis, A., Farahani, R. D., & Therriault, D. (2019). Objective 1: Design and formulate different HTRT materials (PEI or PEEK) reinforced with carbon fibers. (Technical Report). Unavailable
Absi, C., Assi, P., Bureau, A., Cameron, E., Dimas, E., Dupont, S., & Laberge Lebel, L. (2019, August). Carbon fiber/PEEK rivets for fastening composites structures [Presentation]. In 22nd International Conference on Composite Materials (ICCM 2019), Melbourne, Australia. External link
Absi, C., Assi, P., Bureau, A., Cameron, E., Dimas, E., Dupont, S., & Laberge Lebel, L. (2019, May). Joining Composite Using Carbon Fiber/PEEK Rivets [Presentation]. In 5th CASI Aerospace Manufacturing Technologies Symposium, Laval, Québec. Unavailable
Agrapart, Q., Nyssen, F., Lavazec, D., Dufrenoy, P., & Batailly, A. (2019). Multi-physics numerical simulation of an experimentally predicted rubbing event in aircraft engines. Journal of Sound and Vibration, 460, 25 pages. External link
Ajaja, J. (2019). Influence of Hard Turning on the Surface Characteristics and Fatigue Life of 300M Ultra-High Strenght Steel [Ph.D. thesis, Polytechnique Montréal]. Available
Ajaja, J., Jomaa, W., Bocher, P., Chromik, R., Songmene, V., & Brochu, M. (2019). Hard turning multi-performance optimization for improving the surface integrity of 300M ultra-high strength steel. The International Journal of Advanced Manufacturing Technology, 104(1-4), 141-157. External link
Alsinani, N., & Laberge Lebel, L. (2019, September). Thermoplastic pultrusion's cooling temperature effects on pulling forces and deconsolidation [Paper]. 19th Annual SPE Automotive Composites Conference & Exhibition (ACCE 2019), Novi, Michigan (10 pages). Unavailable
Alyaldin, L., & Mureithi, N. W. (2019, July). Equivalent theodorsen function for fluidelastic excitation in a normal triangular array [Paper]. ASME 2019 Pressure Vessels and Piping Conference (PVP 2019), San Antonio, TX, United states (7 pages). External link
Ammar, S., & Lefebvre, S. (2019, June). Formative evaluation in the service of active learning [Paper]. EdMedia + Innovate Learning 2019, Amsterdam, Netherlands. External link
Anne, F., Béguin, C., Étienne, S., Causse, P., Scott, D., & Bornard, L. (2019, September). Void fraction and bubble size measurement inside clouds of air bubbles in flowing water [Paper]. 38th IAHR World Congress, Panama City, Panama. External link
Arabi, S., Trépanier, J.-Y., & Camarero, R. (2019). A simple extension of Roe's scheme for multi-component real gas flows. Journal of Computational Physics, 388, 178-194. External link
Arriagada, J., Gschwender, A., Munizaga, M. A., & Trépanier, M. (2019). Modeling bus bunching using massive location and fare collection data. Journal of Intelligent Transportation Systems : Technology, Planning, and Operations, 23(4), 332-344. External link
Asadi, R., Yeganefar, A., & Niknam, S. A. (2019). Optimization and prediction of surface quality and cutting forces in the milling of aluminum alloys using ANFIS and interval type 2 neuro fuzzy network coupled with population-based meta-heuristic learning methods. International Journal of Advanced Manufacturing Technology, 105(5-6), 2271-2287. External link
Aubin, C.-É., & Wang, X. (2019). Biomechanics of Sagittal Balance – Modeling of the Spine. In Roussouly, P., Pinheiro-Franco, J. L., Labelle, H., & Gehrchen, M. (eds.), Sagittal Balance of the Spine – From Normal to Pathology: A Key for Treatment Strategy . Unavailable
Aubin, C.-É., Armstrong, R., Rawlinson, J., & Wang, X. (2019, June). How do additional rods reduce loading of the primary rods in adult spinal instrumentation with pedicle subtraction osteotomy? [Paper]. 2nd International Combined Meeting of Orthopaedic Research Societies (ICORS) and the Canadian Orthopaedic Association and Canadian Orthopaedic Research Society, Montréal, Québec, Canada. Unavailable
Aujogue, N. (2019). Application de l'holographie acoustique transitoire au contrôle non destructif de structures [Master's thesis, Polytechnique Montréal]. Available
Aujogue, N., & Ross, A. (2019, July). Transient force analysis technique to identify time-varying loads and defects on plates [Paper]. 26th International Congress on Sound and Vibration (ICSV 2019), Montréal, Qc, Canada. External link
Bag, A. (2019). Effect of Shot Peening on the Axial Fatigue Life of 300M Steel [Ph.D. thesis, Polytechnique Montréal]. Available
Bag, A., Delbergue, D., Bocher, P., Lévesque, M., & Brochu, M. (2019). Statistical analysis of high cycle fatigue life and inclusion size distribution in shot peened 300M steel. International Journal of Fatigue, 118, 126-138. External link
Bag, A., Lévesque, M., & Brochu, M. (2019). Effect of shot peening on short crack propagation in 300M steel. International Journal of Fatigue, 131, 105346 (9 pages). External link
Bahloul, A., Djebara, A., Saidi, M. N., Songmene, V., Villalpando, F., & Reggio, M. (2019). Computational and Experimental Analysis of Ultrafine Particle Dispersion During Granite Polishing. Aerosol Science and Engineering, 3(1), 21-31. External link
Bahloul, A., Jorge, R. F. V., Djebara, A., Songmene, V., Saidi, M. N., Kouam, J., Reggio, M., & Villalpando, F. (2019). Transformation du granit : caractérisation et contrôle de la poussière de la silice émise par le polissage. (Technical Report n° R-1054). External link
Bakhta, A., Leclaire, S., Vidal, D., Bertrand, F., & Cheriet, M. (2019). Multiscale simulation of ink seepage into paper: A mesoscopic variational model. Computer Physics Communications, 239, 13 pages. External link
Bakhtiari, M., Lakis, A. A., & Kerboua, Y. (2019). Derivatives of fourth order Kronecker power systems with applications in nonlinear elasticity. Applied Mathematics and Computation, 362(362), 14 pages. External link
Beaini, D. (2019). Green Function and Electromagnetic Potential for Computer Vision and Convolutional Neural Network Applications [Ph.D. thesis, Polytechnique Montréal]. Available
Béland, M., deChamplain, A., Kalla, S., & Robert, É. (2019, June). Scaling Methodology of the FAA Burner for Pre-Qualification Fire Tests of Aircraft Engine Panels [Paper]. ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition, Phoenix, Arizona (11 pages). External link
Belanger, M.-C., Forcier, P., Gendreau, Y., Bujold, A., Pesant, S., Page, S., & Laberge Lebel, L. (2019, September). Effect of tailored fiber placement threads on carbon/epoxy composite impact resistance [Paper]. 6th Annual Composites and Advanced Materials Expo (CAMX 2019), Anaheim, CA, USA. External link
Ben Lassoued, M. A. (2019). Localisation et concentration d'énergie vibratoire dans une structure composite de type sandwich [Ph.D. thesis, Polytechnique Montréal]. Available
Benoit, D. (2019). Biomechanical Simulator for the Surgical Correction of Sagittal Balance in Adult Spinal Deformity [Master's thesis, Polytechnique Montréal]. Available
Bernier, M. (2019). A review of vertical ground heat exchanger sizing tools including an inter-model comparison. Renewable and Sustainable Energy Reviews, 110, 247-265. Available
Bernier, M., & Brussieux, Y. (2019). Universal short time g*-functions : generation and application. Science and Technology for the Built Environment, 25(8), 993-1006. Available
Beurcq, C. (2019). Control Strategies for Standing Column Wells in a Cold Climate [Master's thesis, Polytechnique Montréal]. Available
Bianco, R.-J., Arnoux, P.-J., Mac-Thiong, J.-M., & Aubin, C.-É. (2019). Thoracic pedicle screw fixation under axial and perpendicular loadings: A comprehensive numerical analysis. Clinical Biomechanics, 68, 190-196. External link
Bidhendi, A. J., Altartouri, B., Gosselin, F., & Geitmann, A. (2019). Mechanical stress initiates and sustains the morphogenesis of wavy leaf epidermal cells. Cell Report, 28(5), 1237-1250.e6. Available
Birglen, L. (2019). Design of a partially-coupled self-adaptive robotic finger optimized for collaborative robots. Autonomous Robots, 43(2), 523-538. Available
Birglen, L., & Gouttefarde, M. (2019, May). Comparison of redundancy resolution methods for a cable-suspended spatial parallel robot [Comparaison de méthodes de résolution de la redondance d'un robot parallèle spatial suspendu à câbles]. [Paper]. CCToMM Mechanisms, Machines, and Mechatronics Symposium (M3 2019), Montréal, Qc, Canada (12 pages). External link
Birglen, L., & Gouttefarde, M. (2019, June). Stiffness of planar 2-DOF 3-differential cable-driven parallel robots [Paper]. 4th International Conference on Cable-Driven Parallel Robots, Krakow, Poland. External link
Bodkhe, S., Therriault, D., Gosselin, F., & Rui, T. (2019). Piezoelectric composite, ink and ink cartridge for 3D printing, bifunctional material comprising the piezoelectric composite, manufacture and uses thereof. [Composite piézoélectrique, encre et cartouche d'encre pour l'impression (3d), matériau bifonctionnel comprenant le composite piézoélectrique, leur fabrication et utilisations]. (Patent Application no. US20190284423). External link
Bougrinat, Y., Achiche, S., & Raison, M. (2019). Design and development of a lightweight ankle exoskeleton for human walking augmentation. Mechatronics, 64, 12 pages. External link
Boulos, P. (2019). Formulation faible des équations de Navier-Stokes non inertielle en rotation pure en éléments finis spectraux [Master's thesis, Polytechnique Montréal]. Available
Boulvert, J., Cavalieri, T., Costa-Baptista, J., Schwan, L., Romero-Garcia, V., Gabard, G., Fotsing, E. R., Ross, A., Mardjono, J., & Groby, J.-P. (2019). Optimally graded porous material for broadband perfect absorption of sound. Journal of Applied Physics, 126(17), 15 pages. External link
Boulvert, J., Cavalieri, T., Romero-Garcia, V., Gabard, G., Fotsing, E. R., Ross, A., Mardjono, J., & Groby, J.-P. (2019, July). Numerical optimization method of continuously graded porous material [Paper]. 26th International Congress on Sound and Vibration (ICSV 2019), Montréal, Qc, Canada. Unavailable
Bourgault-Côté, S. (2019). Ice Interface Evolution Modelling Algorithms for Aircraft Icing [Ph.D. thesis, Polytechnique Montréal]. Available
Bourgault-Cote, S., Docampo-Sanchez, J., & Laurendeau, É. (2019). Multilayer Airfoil Ice Accretion Simulations Using a Level-Set Method with B-Spline Representation. AIAA Journal, 57(8), 3299-3308. External link
Bourgault-Cote, S., Parenteau, M., & Laurendeau, É. (2019, March). Quasi-3D multi-layer ice accretion model using a Vortex Lattice Method combined with 2.5D RANS solutions [Paper]. 54th 3AF International Conference on Applied Aerodynamics, Paris, France (7 pages). Unavailable
Bouscarrat, D. (2019). Time-Dependent Damage in Woven-Ply Thermoplastic Composites Above Glass Transition Temperature [Ph.D. thesis, Polytechnique Montréal]. Available
Bretin, R., Lévesque, M., & Bocher, P. (2019). Neighborhood effect on the strain distribution in linearly elastic polycrystals: Part 1 - Finite element study of the interaction between grains. International Journal of Solids and Structures, 176-177, 36-48. External link
Bretin, R., Lévesque, M., & Bocher, P. (2019). Neighborhood effect on the strain distribution in linearly elastic polycrystals: Part 2 - Cellular Automaton. International Journal of Solids and Structures, 176-177, 49-67. External link
Breumier, S., Sao-Joao, S., Villani, A., Baltazar, J., Lévesque, M., & Kermouche, G. (2019, September). Nanomechanical testing for crystal plasticity constitutive framework identification at high strain rates [Paper]. VII Nanomechanical Testing in Materials Research and Development, Melia Costa Del Sol, Malaga, Spain. Unavailable
Breumier, S., Villani, A., Maurice, C., Lévesque, M., & Kermouche, G. (2019). Effect of crystal orientation on indentation-induced residual stress field: Simulation and experimental validation. Materials & Design, 169. Available
Brussieux, Y. (2019). Facteurs de réponse de puits géothermiques pour courts pas de temps [Master's thesis, Polytechnique Montréal]. Available
Burgarella, B., & Laberge Lebel, L. (2019, July). Multi-scale finite element analysis of braids and bundles of filaments using embedded elements [Presentation]. In 11th Canadian-International Conference on Composites, Kelona, Colombie-Britannique. Unavailable
Butler, S., Fotsing, E. R., & Ross, A. (2019). Acoustic thermoset open-cell foams produced by particulate leaching process. Journal of Materials Science, 54(19), 12553-12572. External link
Butler, S., Fotsing, E. R., & Ross, A. (2019, July). Acoustic thermoset open-cell multilayer foams produced by a particulate leaching process [Paper]. 26th International Congress on Sound and Vibration (ICSV 2019), Montréal, Qc, Canada. Unavailable
Canals, L., Badreddine, J., McGillivray, B., Miao, H. Y., & Lévesque, M. (2019). Effect of vibratory peening on the sub-surface layer of aerospace materials Ti-6Al-4V and E-16NiCrMo13. Journal of Materials Processing Technology, 264, 91-106. External link
Caru, M., Corbin, D., Périé-Curnier, D., Lemay, V., Delfrate, J., Drouin, S., Bertout, L., Krajinovic, M., Laverdiere, C., Andelfinger, G., Sinnett, D., & Curnier, D. (2019). Doxorubicin treatments induce significant changes on the cardiac autonomic nervous system in childhood acute lymphoblastic leukemia long-term survivors. Clinical Research in Cardiology, 108(9), 1000-1008. External link
Cavalieri, T., Boulvert, J., Schwan, L., Gabard, G., Romero-Garcia, V., Groby, J.-P., Escouflaire, M., & Mardjono, J. (2019). Acoustic wave propagation in effective graded fully anisotropic fluid layers. Journal of the Acoustical Society of America, 146(5), 3400-3408. External link
Chakour, T. (2019). Assessment of Flow Unsteadiness in Turbocharger Compressor [Master's thesis, Polytechnique Montréal]. Available
Chauvette, J.-F., Piccirelli, N., & Therriault, D. (2019, October). Rapid direct deposition of filled polymer on non-planar surface [Paper]. 30th International Conference on Adaptive Structures and Technologies (ICAST 2019), Montréal, Qc, Canada. External link
Chávez Gómez, P., Pelzmann, T., Langot, J., Robert, É., & Laberge Lebel, L. (2019, August). Fuel effect on the tensile strength evolution of carbon fibers under direct flame attack [Poster]. 22nd International Conference on Composite Materials (ICCM 2019), Melbourne, Australia. External link
Chávez, P., Pelzmann, T., Robert, É., & Laberge Lebel, L. (2019, January). Evaluation of the fire resistance of protected carbon/epoxy laminates in small-scale experiments [Paper]. AIAA Scitech Forum, San Diego, California. External link
Chouinard, U. (2019). On the Mitigation of Late Stage Redesign in Mechatronics Using Integrated Approaches [Ph.D. thesis, Polytechnique Montréal]. Available
Chouinard, U., Achiche, S., & Baron, L. (2019). Integrating negative dependencies assessment during mechatronics conceptual design using fuzzy logic and quantitative graph theory. Mechatronics, 59, 140-153. External link
Chouinard, U., Achiche, S., Santos, I., & Baron, L. (2019, March). Robust design support using fuzzy simulation of uncertain dynamic system : a self balancing robot case study [Paper]. 15th International Symposium on Dynamic Problems of Mechanics (DINAMW 2019), Buzios, Brazil. Unavailable
Chouinard, U., Pigosso, D. C. A., McAloone, T. C., Baron, L., & Achiche, S. (2019). Potential of circular economy implementation in the mechatronics industry: An exploratory research. Journal of Cleaner Production, 239, 12 pages. External link
Cianfoni, A., Distefano, D., Scarone, P., Pesce, G. A., Espeli, V., La Barbera, L., Villa, T., Reinert, M., Bonaldi, G., & Hirsch, J. A. (2019). Stent screw–assisted internal fixation (SAIF): clinical report of a novel approach to stabilizing and internally fixating vertebrae destroyed by malignancy. Journal of Neurosurgery: Spine SPI, 12 pages. External link
Cimmino, M. (2019). Semi-Analytical Method for g-Function Calculation of bore fields with series- and parallel-connected boreholes. Science and Technology for the Built Environment, 25(9), 1007-1022. Available
Cimmino, M., & Baliga, B. R. (2019). A hybrid numerical-semi-analytical method for computer simulations of groundwater flow and heat transfer in geothermal borehole fields. International Journal of Thermal Sciences, 142, 366-378. Available
Cimmino, M., & Laferrière, A. (2019). Linear model predictive control for the reduction of auxiliary electric heating in residential self-assisted ground-source heat pump systems. Science and Technology for the Built Environment, 25(8), 1095-1110. Available
Cio, Y.-S. L.-K., Raison, M., Leblond Menard, C., & Achiche, S. (2019). Proof of Concept of an Assistive Robotic Arm Control Using Artificial Stereovision and Eye-Tracking. IEEE Transactions on Neural Systems and Rehabilitation Engineering, 27(12), 2344-2352. External link
Corcoran, A., Eslami Nejad, P., Bernier, M., & Badache, M. (2019). Calibration of thermal response test (TRT) units with a virtual borehole. Geothermics, 79, 105-113. Available
Costa-Baptista, J., Fotsing, E. R., Therriault, D., & Ross, A. (2019, July). Impact of 3D printed thin wall on Helmholtz resonator acoustic response: Experimental investigatations [Paper]. 26th International Congress on Sound and Vibration (ICSV 2019), Montréal, Qc, Canada. Unavailable
Coudert, P., Dubé-Cyr, R., Chaumoitre, K., Gille, O., Vital, J.-M., Jouve, J.-L., Arnoux, P.-J., Panuel, M., & Evin, M. (2019). Sacroiliac joint morphologic changes from infancy to adulthood. Spine Journal, 19(10), 1730-1738. External link
Courtois, A., Marcin, L., Benavente, M., Ruiz, E., & Lévesque, M. (2019). Numerical multiscale homogenization approach for linearly viscoelastic 3D interlock woven composites. International Journal of Solids and Structures, 163, 61-74. External link
Cusson, E., Akbarzadeh, A. H., Therriault, D., & Rodrigue, D. (2019). Density graded polyethylene foams: Effect of processing conditions on mechanical properties. Cellular Polymers, 38(1-2), 3-14. External link
Dayi, O. (2019). Méthodologie d'amélioration de l'agilité des chaînes logistiques - Application à une chaîne logistique d'un produit aéronautique [Ph.D. thesis, Polytechnique Montréal]. Available
Dehghan-Hamani, I., Arjmand, N., & Shirazi-Adl, A. (2019). Subject-specific loads on the lumbar spine in detailed finite element models scaled geometrically and kinematics-driven by radiography images. International Journal for Numerical Methods in Biomedical Engineering, 35(4), e3182 (32 pages). External link
Delbergue, D., Texier, D., Lévesque, M., & Bocher, P. (2019). Diffracting-grain identification from electron backscatter diffraction maps during residual stress measurements: a comparison between the sin²ψ and cosα methods. Journal of Applied Crystallography, 52(4), 828-843. External link
Delfour, M. C., Garon, A., & Lamontagne, S. (2019). Three-dimensional drug release in the stent-polymer-wall-lumen of a blood vessel. SIAM Journal on Applied Mathematics, 79(5), 1850-1871. External link
Delgado Sedano, L. (2019). Uncertainty Modeling in Robotic Maintenance Using Computer Vision [Master's thesis, Polytechnique Montréal]. Available
Dick, J.-S. (2019). Un nouveau modèle d'échange de masse et de quantité de mouvement entre formulation lagrangienne et eulérienne appliqué à une cavité de roulement de moteur d'avion [Ph.D. thesis, Polytechnique Montréal]. Available
Diehl, P., Prudhomme, S., & Lévesque, M. (2019). A Review of Benchmark Experiments for the Validation of Peridynamics Models. Journal of Peridynamics and Nonlocal Modeling, 1(1), 14-35. External link
Diouf-Lewis, A., Iervolino, F., Abderrafai, Y., Pierre, J., Farahani, R. D., Piccirelli, N., & Therriault, D. (2019, August). Design of high temperature resistant thermoplastic composites for FDM 3D printing [Presentation]. In 22nd International Conference on Composite Materials (ICCM22), Melbourne, Australia. Unavailable
Douillet-Grellier, T., Leclaire, S., Vidal, D., Bertrand, F., & De Vuyst, F. (2019). Comparison of multiphase SPH and LBM approaches for the simulation of intermittent flows. Computational Particle Mechanics, 6(4), 695-720. External link
Doulcet, B. (2019). Simulations des interactions fluide-structure par une formulation bilatérale fortement couplée sous OpenFOAM [Master's thesis, Polytechnique Montréal]. Available
Doulcet, B., Devals, C., Nennemann, B., Gauthier, M., Guibault, F., & Trépanier, J.-Y. (2019, October). Two-way strongly coupled fluid-structure interaction simulations with OpenFOAM [Paper]. 8th IAHR International Workshop on Cavitation and Dynamic Problems in Hydraulic Machinery and Systems (IAHR 2019), Stuttgart, Germany (7 pages). External link
El Samrout, A., Braydi, O., Younes, R., Trochu, F., & Lafon, P. (2019). A new hybrid method to solve the multi-objective opimization problem for a composite hat-stiffened panel. In Bioinspired heuristics for optimization (77-88). Unavailable
Elzein, B., Xing, J., Jobin, O., & Robert, É. (2019, August). Combustion of aluminized solid propellants with bimodal oxidizer particle size distribution [Paper]. AIAA Propulsion and Energy Forum and Exposition, Indianapolis, IN, United states. External link
Eskandari, A. H., Arjmand, N., Shirazi-Adl, A., & Farahmand, F. (2019). Hypersensitivity of trunk biomechanical model predictions to errors in image-based kinematics when using fully displacement-control techniques. Journal of Biomechanics, 84, 161-171. External link
Farahani, R. D., & Therriault, D. (2019). Advanced manufacturing of composites for structural and acoustic applications. (Technical Report). Unavailable
Farahani, R. D., & Therriault, D. (2019). Advanced manufacturing of composites for structural and acoustic applications. (Technical Report). Unavailable
Farahani, R. D., & Therriault, D. (2019). Advanced manufacturing of reinforced composites for aerospace applications – Phase 2. (Technical Report). Unavailable
Farahani, R. D., & Therriault, D. (2019, July). Design of multifunctional composites and their multi-material additive manufacturing [Abstract]. International Conference on Advances in Functional Materials, Washington, DC, United States. External link
Farahani, R. D., Hia, I. L., Chauvette, J.-F., Gregorio, P., Brzeski, D., & Therriault, D. (2019). Objective 4: Develop a printing process for direct deposition of acoustic abradable materials on composite structures featuring flat and curved geometries. (Technical Report). Unavailable
Faucheux, P. (2019). Simulating Shot Peen Forming with Eigenstrains [Ph.D. thesis, Polytechnique Montréal]. Available
Fedorov, D. (2019). Conception de systèmes mécaniques auto-adaptatifs pour la locomotion [Ph.D. thesis, Polytechnique Montréal]. Available
Fedorov, D., & Birglen, L. (2019). Design of a Compliant Mechanical Device for Upper Leg Rehabilitation. IEEE Robotics and Automation Letters, 4(2), 870-877. External link
Fernandez-Escudero, C., Gagnon, M., Laurendeau, É., Prothin, S., Michon, G., & Ross, A. (2019). Comparison of low, medium and high fidelity numerical methods for unsteady aerodynamics and nonlinear aeroelasticity. Journal of Fluids and Structures, 91, 12 pages. External link
Fortin, S. (2019). Étude de bistabilité des bulles ellipsoïdales par une méthode ALE de résolution des écoulements diphasiques [Master's thesis, Polytechnique Montréal]. Available
Fotsing, E. R., Dubourg, A., Ross, A., & Mardjono, J. (2019). Acoustic properties of periodic micro-structures obtained by additive manufacturing. Applied Acoustics, 148, 322-331. External link
Fotsing, E. R., Rezabeigi, E., Ross, A., Wood-Adams, P. M., & Drew, R. A. L. (2019). Acoustical characteristics of ultralight polylactic acid foams fabricated via solution phase inversion. Journal of Porous Materials, 26(6), 1781-1794. External link
Gad-El-Hak, I. (2019). Fluid-structure interaction for biomimetic design of an innovative lightweight turboexpander. Biomimetics, 4(1). Available
Gagnon, M. (2019). Nonlinear Aeroelastic Coupling of Aircraft Aerostructural Systems [Master's thesis, Polytechnique Montréal]. Available
Gamache, J.-F., Vadean, A., & Achiche, S. (2019, May). Validating Novel Stiffened Panel Configuration Generated with Topology Optimization using Non-Linear Analysis [Paper]. Canadian Aeronautics and Space Institute (AERO 19), Laval, Québec, Canada (4 pages). External link
Gamache, J.-F., Vadean, A., & Achiche, S. (2019, May). Validating Novel Stiffened Panel Configuration Generated with Topology Optimization using Non-Linear Analysis [Paper]. 39th Conference on Applied Statistics in Ireland (CASI 2019), Dublin, Ireland (4 pages). Unavailable
Gamdani, F., Boukhili, R., & Vadean, A. (2019). Tensile behavior of hybrid multi-bolted/bonded joints in composite laminates. International Journal of Adhesion and Adhesives, 95, 11 pages. External link
Gaudet, S. (2019). Vérification de code pour le modèle k-ϵ standard de OpenFOAM [Master's thesis, Polytechnique Montréal]. Available
Gaudreau, J., Mekhail, M., Hamdy, R., & Villemure, I. (2019). Remote-controlled internal lengthening plate for distraction osteogenesis in pediatric patients. Expert Review of Medical Devices, 16(4), 333-339. External link
Gendreau, Y. (2019). Modélisation et simulation de composite à renfort fabriqué par broderie [Master's thesis, Polytechnique Montréal]. Available
Gervais, B., Vadean, A., Brochu, M., & Raison, M. (2019). Rebuttal to comments by R. Dumas. Multibody System Dynamics, 47(4), 439-440. External link
Ghaedsharaf, M., & Laberge Lebel, L. (2019, April). The effect of braid angle on the void content and fiber misorientation of thermoplastic Diamond, Regular and Hercules braided rod manufacturing using braid-trusion [Presentation]. In 4th International Symposium on Automated Composites Manufacturing, Montréal, Québec. Unavailable
Ghaedsharaf, M., & Laberge Lebel, L. (2019, May). The effect of braid pattern on the pulling force of thermoplastic braid-trusion [Presentation]. In 5th CASI Aerospace Manufacturing Technologies Symposium, Laval, Québec. Unavailable
Ghafoori-Ahangar, R., & Verreman, Y. (2019). Fatigue behavior of load-carrying cruciform joints with partial penetration fillet welds under three-point bending. Engineering Fracture Mechanics, 215, 211-223. External link
Ghandali, P., Khameneifar, F., & Mayer, J. R. R. (2019). A pseudo-3D ball lattice artifact and method for evaluating the metrological performance of structured-light 3D scanners. Optics and Lasers in Engineering, 121, 87-95. External link
Ghezelbash, F. (2019). Subject-Specific Computational Musculoskeletal Modeling of Human Trunk in Lifting : Role of Age, Sex, Body Weight and Body Height [Ph.D. thesis, Polytechnique Montréal]. Available
Giraud, A., Sevostianov, I., Kushch, V. I., Cosenza, P., Pret, D., Barthelemy, J. F., & Trofimov, A. (2019). Effective electrical conductivity of transversely isotropic rocks with arbitrarily oriented ellipsoidal inclusions. Mechanics of Materials, 133, 174-192. External link
Gondran, M., Laberge Lebel, L., & Khameneifar, F. (2019, December). Development of an iterative braiding model with angle control and thickness measurement [Poster]. Colloque Annuel du Centre de Recherche sur les Systèmes Polymères et Composites à haute performance CREPEC, Québec, Québec. Unavailable
Gosselin, F. (2019). Mechanics of a plant in fluid flow. Journal of Experimental Botany, 70(14), 3533-3548. External link
Greffier, L. (2019). Perchage automatique de drones basé sur la vision artificielle [Master's thesis, Polytechnique Montréal]. Available
Gunaydin, K., Eren, Z., Kazanci, Z., Scarpa, F., Grande, A. M., & Turkmen, H. S. (2019). In-plane compression behavior of anti-tetrachiral and re-entrant lattices. Smart Materials and Structures, 28(11), 14 pages. External link
Hadji, A., & Mureithi, N. W. (2019). Validation of friction model parameters identified using the IHB method using finite element method. Shock and Vibration, 2019, 3493052 (19 pages). Available
Hashemiboroujeni, H., Esmaeili Marzdashti, S., Xing, K., & Mayer, J. R. R. (2019). Five-axis machine tool coordinate metrology evaluation using the ball dome artefact before and after machine calibration. Journal of Manufacturing and Materials Processing, 3(1), 20 (12 pages). Available
Hassan, A., Bagu, E. T., Lévesque, M., Patten, S. A., Benhadjeba, S., Edjekouane, L., Villemure, I., Tremblay, A., & Moldovan, F. (2019). The 17β-estradiol induced upregulation of the adhesion G-protein coupled receptor (ADGRG7) is modulated by ESRα and SP1 complex. Biology Open, 8(1), bio037390 (13 pages). Available
Hassan, A., Parent, S., Mathieu, H., Zaouter, C., Molidperee, S., Bagu, E. T., Barchi, S., Villemure, I., Patten, S. A., & Moldovan, F. (2019). Adolescent idiopathic scoliosis associated POC5 mutation impairs cell cycle, cilia length and centrosome protein interactions. PLOS One, 14(3), e0213269 (17 pages). Available
Hayi-Slayman, N. (2019). Projet de recherche biomédical: rapport d'analyse d'équipements du Technopôle. (Study Report - Graduate Studies). Available
Himmiche, S., Trofimov, A., Eren, Z., Farahani, R. D., Lévesque, M., & Therriault, D. (2019). Supplementary Objective 1: 3D reinforced composites manufactured by Resin Transfer Molding (RTM). (Technical Report). Unavailable
Ho, M., Leclaire, S., Reggio, M., & Trépanier, J.-Y. (2019, February). Mesoscopic simulations of thermal protection systems using the lattice Boltzmann method [Poster]. Simulation-Based Engineering Science Day, Montréal, Québec. Unavailable
Ho, M., Perez, J. G., Reggio, M., & Trépanier, J.-Y. (2019). Permeability calculation of rarefied gas flows through 2D porous structures using the lattice Boltzmann method. Physics and Chemistry of the Earth, Parts A/B/C, 113, 43-49. External link
Ho, M., Pérez, J., Leclaire, S., Reggio, M., & Trépanier, J.-Y. (2019, June). Investigation of advection-diffusion problems and simulations using the lattice Boltzmann method and the ArrayFire library for high-performance computing on GPU [Abstract]. Joint Canadian Society for Mechanical Engineering and CFD Society of Canada International Congress, London, Ontario. External link
Hodonou, C., Balazinski, M., Brochu, M., & Mascle, C. (2019). Material-design-process selection methodology for aircraft structural components: application to additive vs subtractive manufacturing processes. International Journal of Advanced Manufacturing Technology, 103(1-4), 1509-1517. External link
Huang, W., Causse, P., Brailovski, V., Hu, H., & Trochu, F. (2019). Reconstruction of mesostructural material twin models of engineering textiles based on Micro-CT Aided Geometric Modeling. Composites Part A: Applied Science and Manufacturing, 124, 20 pages. External link
Huang, W., Huang, Q., Liu, Y., Yang, J., Hu, H., Trochu, F., & Causse, P. (2019). A Fourier based reduced model for wrinkling analysis of circular membranes. Computer Methods in Applied Mechanics and Engineering, 345, 1114-1137. External link
Iervolino, F. (2019). Additive Manufacturing of Low and High Temperature Resistant Thermoplastic Composites and Sandwich Panels for Sound Absorption [Master's thesis, Polytechnique Montréal]. Available
Iervolino, F., Pierre, J., Piccirelli, N., & Therriault, D. (2019, August). Additive manufacturing of composite sandwich panels for broadband sound absorption [Presentation]. In International Conference on Composite Materials (ICCM22), Melbourne, Australia. Unavailable
Imani, R. J., Ladhani, L., Pardon, G., van der Wijngaart, W., & Robert, É. (2019). The influence of air flow velocity and particle size on the collection efficiency of passive electrostatic aerosol samplers. Aerosol and Air Quality Research, 19(2), 195-203. External link
Inaekyan, K., Kreitcberg, A., Turenne, S., & Brailovski, V. (2019). Microstructure and mechanical properties of laser powder bed-fused IN625 alloy. Materials Science and Engineering A, 768, 13 pages. External link
Jankowski, M., Wozniak, A., & Mayer, J. R. R. (2018, December). On-machine and In-laboratory Investigation of Errors of Probes for CNC Machine Tools [Paper]. International Conference on Advances in Engineering Resesarch and Application (ICERA 2018), Thai Nguyen, Vietnam. External link
Jaramillo, A. M., Aubin, C.-É., Hachem, B., Londono, I., Pelletier, J., Parent, S., & Villemure, I. (2019). Mechanobiological analysis of porcine spines instrumented with intra-vertebral staples. Journal of Musculoskeletal & Neuronal Interactions, 19(1), 13-20. External link
Javadi, H., Jomaa, W., Songmene, V., Brochu, M., & Bocher, P. (2019). Inconel 718 Superalloy Controlled Surface Integrity for Fatigue Applications Produced by Precision Turning. International Journal of Precision Engineering and Manufacturing, 20(8), 1297-1310. External link
Joachim, J., Nyssen, F., & Batailly, A. (2019, November). Numerical investigation of an academic mistuned bladed disk dynamics accounting for blade/casing contacts [Paper]. ASME 2019 International Mechanical Engineering Congress and Exposition, (IMECE 2019), Salt Lake City, UT, United states (10 pages). External link
Kadoury, S., Knez, D., & Aubin, C.-É. (2019). Biomechanically driven intraoperative spine registration during navigated anterior vertebral body tethering. Physics in Medicine & Biology, 64(11), 115008 (28 pages). External link
Karaki, M., Younes, R., Trochu, F., & Lafon, P. (2019). Progress in experimental and theoretical evaluation methods for textile permeability. Journal of Composites Science, 3(3), 28 pages. Available
Keshavarz, M. K., Lo, C.-W. T., Turenne, S., Mozharivskyj, Y., & Quitoriano, N. J. (2019). Hot Extrusion of ZnSb-Based Thermoelectric Materials; A Novel Approach for Scale-Up Production. Journal of Manufacturing and Materials Processing, 3(3), 58-58. External link
Khameneifar, F. (2019, June). Innovative strategies for assessing the metrological performance of optical 3D scanners [Abstract]. International Congress of the Canadian Society for Mechanical Engineering (CSME 2019), London, Ontario. Unavailable
Khameneifar, F., & Ghorbani, H. (2019). On the curvature estimation for noisy point cloud data via local quadric surface fitting. Computer-Aided Design and Applications, 16(1), 140-149. External link
Kidikian, J. (2019). An Off-Design Mean-Line Methodology to Predict the Missing Data of Single-Stage Transonic Axial Compressor Tests [Ph.D. thesis, Polytechnique Montréal]. Available
Kliem, M., Høgsberg, J., Vanwalleghem, J., Filippatos, A., Hoschützky, S., Fotsing, E. R., & Berggreen, C. (2019). Damping analysis of cylindrical composite structures with enhanced viscoelastic properties. Applied Composite Materials, 26(1), 85-113. External link
Klotz, T., Lévesque, M., & Brochu, M. (2019). Effects of rolled edges on the fatigue life of shot peened Inconel 718. Journal of Materials Processing Technology, 263, 276-284. External link
Kontogiannis, A., Parenteau, M., & Laurendeau, É. (2019, January). Viscous-Inviscid Analysis of Transonic Swept Wings using 2.5D RANS and Parametric Shapes [Paper]. AIAA Scitech Forum, San Diego, California. External link
Kreitcberg, A., Inaekyan, K., Turenne, S., & Brailovski, V. (2019). Temperature- and time-dependent mechanical behavior of post-treated IN625 alloy processed by laser powder bed fusion. Journal of Manufacturing and Materials Processing, 3(3), 75 (18 pages). Available
La Barbera, L., Cianfoni, A., Ferrari, A., Distefano, D., Bonaldi, G., & Villa, T. (2019). Stent Screw-Assisted Internal Fixation (SAIF) of Severe Lytic Spinal Metastases: A Comparative Finite Element Analysis of the SAIF Technique. World Neurosurgery, 128, E370-E377. External link
La Barbera, L., Cianfoni, A., Ferrari, A., Distefano, D., Bonaldi, G., & Villa, T. (2019). Stent-screw assisted internal fixation of osteoporotic vertebrae: A comparative finite element analysis on SAIF technique. Frontiers in Bioengineering and Biotechnology, 7, 291 (11 pages). Available
La Barbera, L., Larson, A. N., Wang, X., & Aubin, C.-É. (2019, May). Screw density and pattern have limited impact on the 3D correction of Lenke 1A curves [Paper]. 34eme Congrès de la Recherche des étudiants des cycles supérieurs et des postdoctorants au Centre de recherche du Centre hospitalier universitaire Sainte-Justine, Montréal, Québec, Canada. Unavailable
La Barbera, L., Larson, A. N., Wang, X., & Aubin, C.-É. (2018, April). Screw density has lower impact than correction objectives on 3D correction of Lenke 1A curves [Paper]. 39e journée de la recherche du Programme d'orthopédie Édouward-Samson (POES) et de la division d'orthopédie de l'Université de Montréal, Montréal, Québec, Canada. Unavailable
Laberge Lebel, L., Dragutescu, M., Trudeau, P., Normandin, G., & Rifay, M. (2019). Device and method for positioning a ply of material of a composite component along an arcuate surface. (Patent Application no. US20190329507). External link
Lacombe, F., Pelletier, D., & Garon, A. (2019, January). Compatible wall functions and adaptive remeshing for the k-omega SST model [Paper]. AIAA Scitech Forum, San Diego, California. External link
Laferrière, A. (2019). Modélisation et commande prédictive de pompes à chaleur géothermiques résidentielles auto-assistées [Master's thesis, Polytechnique Montréal]. Available
Lainé, J., Piollet, E., Nyssen, F., & Batailly, A. (2019). Blackbox Optimization for Aircraft Engine Blades With Contact Interfaces. Journal of Engineering for Gas Turbines and Power, 141(6), GTP-18-124 (16 pages). External link
Lakis, A. A., Jalali, A. R., & Toorani, M. (2019). Coupled fluid-structure dynamics of composite plates. International Journal of Numerical Methods and Applications, 18(2), 43-88. External link
Lalande, V. (2019). Conception et évaluation d'un prototype de modulation cyclique de la croissance des vertèbres pour le traitement de la scoliose idiopathique pédiatrique [Ph.D. thesis, Polytechnique Montréal]. Available
Lambert, L. (2019). Lois de paroi compatibles pour les modèles de turbulence à bas-Reynolds [Master's thesis, Polytechnique Montréal]. Available
Lapointe, F., & Laberge Lebel, L. (2019). Fiber damage and impregnation during multi-die vacuum assisted pultrusion of carbon/PEEK hybrid yarns. Polymer Composites, 40(S2), E1015-E1028. External link
Larouche Guilbert, M., Raison, M., Fortin, C., & Achiche, S. (2019). Development of a multibody model to assess efforts along the spine for the rehabilitation of adolescents with idiopathic scoliosis. Journal of Musculoskeletal and Neuronal Interact, 19(1), 9 pages. External link
Lassoued, M. A. B., Abbad, A., Ross, A., & Michon, G. (2019, July). Numerical and experimental vibration of a sandwich beam with a functionally graded core [Paper]. 26th International Congress on Sound and Vibration (ICSV 2019), Montréal, Qc, Canada. Unavailable
Lavoie, P., Blanchard, G., Radenac, E., Laurendeau, É., & Villedieu, P. (2019, June). A Penalization Method for 2D Ice Accretion Simulations [Paper]. SAE International Conference on Icing of Aircraft, Engines, and Structures, (ICE 2019), Minneapolis, MN, United states. External link
Lebedev, O. V., Trofimov, A., Abaimov, S. G., & Ozerin, A. N. (2019). Modeling of an effect of uniaxial deformation on electrical conductance of polypropylene-based composites filled with agglomerated nanoparticles. International Journal of Engineering Science, 144, 14 pages. External link
Lecours, S. (2019). Développement d'un exosquelette portable motorisé des membres supérieurs pour les enfants atteints de troubles neuromusculaires [Master's thesis, Polytechnique Montréal]. Available
Leroy, L., Letellier-Duchesne, S., & Kummert, M. (2019, September). Using model calibration to improve urban modeling [Paper]. 16th International Conference of the International Building Performance Simulation Association (Building Simulation 2019), Rome, Italy. Unavailable
Lessard, F., Boanta, C., Dubé, M., Laberge Lebel, L., & Robert, É. (2019, August). Impact of cellulose filaments on interlaminar properties, flammability and thermal degradation behavior of polymer matrix composites [Poster]. 22nd International Conference on Composite Materials (ICCM 2019), Melbourne, Australia. External link
Letellier-Duchesne, S. (2019). Planning and Integrated Design of Urban Heat-Sharing Networks [Ph.D. thesis, Polytechnique Montréal]. Available
Li, P. L. (2019). Exosquelette passif pour réduction de chargement lombaire pour levée de charge symétrique. (Study Report - Graduate Studies). Available
Lingua, A., Sosa Rey, F., Lévesque, M., & Therriault, D. (2019). Objective 2: Predict mechanical response of AM composites. (Technical Report). Unavailable
Lombardo, C. (2019). Développement d'un programme de simulation numérique d'écoulements visqueux compressibles [Master's thesis, Polytechnique Montréal]. Available
Loran, S., Cheng, S., Botton, G. A., Yahia, L., Yelon, A., & Sacher, E. (2019). The physicochemical characterization of the Cu nanoparticle surface, and of its evolution on atmospheric exposure: application to antimicrobial bandages for wound dressings. Applied Surface Science, 473, 25-30. External link
Louyot, M. (2019). Modal Analysis of a Spinning Disk in a Dense Fluid as a Model for High Head Hydraulic Turbines [Master's thesis, Polytechnique Montréal]. Available
Madra, A., Causse, P., Trochu, F., Adrien, J., Maire, E., & Breitkopf, P. (2019). Stochastic characterization of textile reinforcements in composites based on X-ray microtomographic scans. Composite Structures, 224, 11 pages. External link
Marcotte, B., & Bernier, M. (2019). Experimental validation of a TRC model for a double U-tube borehole with two independent circuits. Applied Thermal Engineering, 162, 1-34. Available
Marouane, H., & Shirazi-Adl, A. (2019). Sensitivity of medial-lateral load sharing to changes in adduction moments or angles in an asymptomatic knee joint model during gait. Gait & Posture, 70, 39-47. External link
Marouane, H., Shirazi-Adl, A., & Sharifi, M. (2019). Computational Musculoskeletal Biomechanics of the Knee Joint. In Advances in Biomechanics and Tissue Regeneration (181-199). External link
Massicotte, R., Mbeh, D. A., Mafu, A. A., Toulouse, M., Jacobs, D., Yahia, L., & Pichette, G. (2019). Disinfection effect of sodium dichloroisocyanurate (NaDCC) on various surfaces in medical facilities using different techniques. Interdisciplinary Journal of Chemistry, 3, 5 pages. External link
McHichi, N. A., & Mayer, J. R. R. (2019). Optimal calibration strategy for a five-axis machine tool accuracy improvement using the D-optimal approach. International Journal of Advanced Manufacturing Technology, 103(1-4), 251-265. External link
Memarianpour, M., Niknam, S. A., Turenne, S., & Balazinski, M. (2018, December). Initial Tool Wear Mechanism in Dry and Lubricated Turning of Inconel 718 [Paper]. International Conference on Advances in Engineering Research and Application (ICERA 2018), Thai Nguyen, Vietnam. External link
Membrouki, A., Zinneddine, A., & Vasseur, P. (2019). Effects of discrete controllers on the stabilization of natural convection induced by internal heat generation in a shallow cavity. Computational Thermal Sciences, 10(1). External link
Merabet, R., & Laurendeau, É. (2019, January). Parametric Study on the Velocity Sampling Techniques for the Actuator Line Method in 2D [Paper]. AIAA Scitech Forum, San Diego, California. External link
Mirabolghasemi, A., Akbarzadeh, A. H., Rodrigue, D., & Therriault, D. (2019). Thermal conductivity of architected cellular metamaterials. ACTA Materialia, 174, 61-80. External link
Mohammadian, N., Turenne, S., & Brailovski, V. (2019). Electropolishing of laser powder bed-fused IN625 components in an ionic electrolyte. Journal of Manufacturing and Materials Processing, 3(4), 86 (20 pages). Available
Mohammed, I. (2019). Comparison of the Renishaw Ball Bar and Samba Method in 3-Axis and 5-Axis Machine Calibration, Including Reversal Error Estimation with the Tango Method [Master's thesis, Polytechnique Montréal]. Available
Mohebbi, A., Achiche, S., & Baron, L. (2019). Integrated and concurrent detailed design of a mechatronic quadrotor system using a fuzzy-based particle swarm optimization. Engineering Applications of Artificial Intelligence, 82, 192-206. External link
Mouazé, N., & Birglen, L. (2019, May). Preliminary design of a revolute to prismatic morphing compliant join [Paper]. CCToMM Mechanisms, Machines and Mechatronics Symposium (M3 2019), Montréal, Qc, Canada (11 pages). Unavailable
Mouazé, N., & Birglen, L. (2019, May). Preliminary Design of a Revolute to Prismatic Morphing Compliant Joint [Conception préliminaire d’une articulation rotoide compliante changeant en une liaison prismatique]. [Paper]. CCToMM Mechanisms, Machines and Mechatronics (M3) Symposium, Montréal, Canada (11 pages). External link
Muller, E., Pelletier, D., & Garon, A. (2019). Interactions between adaptive time-integrators and adaptive meshing in a monolithic FEM solver. International Journal of Numerical Methods for Heat and Fluid Flow, 29(7), 2297-2323. External link
Murray, P. (2019). Development of an Automated In-Line Resin Metering and Mixing System for Composites in the Automotive Industry [Master's thesis, Polytechnique Montréal]. Available
Mustafy, T. (2019). The Short and Long Term Effects of in Vivo Cyclic Axial Compression Applied During Puberty on Bone Growth, Morphometry and Biomechanics [Ph.D. thesis, Polytechnique Montréal]. Available
Mustafy, T., Londono, I., & Villemure, I. (2019). Experimental and finite element analyses of bone strains in the growing rat tibia induced by in vivo axial compression. Journal of the Mechanical Behavior of Biomedical Materials, 94, 176-185. External link
Mustafy, T., Londono, I., Moldovan, F., & Villemure, I. (2019). High impact exercise improves bone microstructure and strength in growing rats. Scientific Reports, 9(1), 13128. Available
Nasraoui, M. T., Chakhari, J., Khalfi, B., & Nasri, M. (2019). Modeling and analysis of a bolted joint under tension and shear loads. Transactions of the Canadian Society for Mechanical Engineering, 43(3), 376-386. External link
Neale, A., Kummert, M., & Bernier, M. (2019, September). Linear discriminant analysis for classification of a large virtual smart meter data set with known building parameters [Paper]. 16th International IBPSA Conference (Building Simulation 2019), Rome, Italy. External link
Neymark, J., Kummert, M., & Judkoff, R. (2019, September). Developing equivalent surface heat transfer input parameters for updated standard 140/BESTEST thermal fabric test cases [Paper]. 16th International Conference of the International Building Performance Simulation Association (Building Simulation 2019), Rome, Italy. External link
Nguyen, M. T., Castonguay, P., & Laurendeau, É. (2019). GPU parallelization of multigrid RANS solver for three-dimensional aerodynamic simulations on multiblock grids. Journal of Supercomputing, 75(5), 2562-2583. External link
Niknam, S. A., Saberi, M., Kouam, J., Hashemi, R., Songmene, V., & Balazinski, M. (2019). Ultrafine and fine particle emission in turning titanium metal matrix composite (Ti-MMC). Journal of Central South University, 26(6), 1563-1572. External link
Nossovitch, A. (2019). A Mechanical and Economical Study on the Incorporation of Anti-Microbial Anodized Aluminum in Cooling Towers [Master's thesis, Polytechnique Montréal]. Available
Nyamsi Hendji, N. (2019). Fascia thoraco-lombaire : vers une meilleure compréhension de la biomécanique de la colonne vertébrale et de la locomotion humaine [Master's thesis, Polytechnique Montréal]. Available
Nyssen, F., & Batailly, A. (2019). Thermo-Mechanical Modeling of Abradable Coating Wear in Aircraft Engines. Journal of Engineering for Gas Turbines and Power, 141(2). External link
Nyssen, F., Vadcard, T., Piollet, E., & Batailly, A. (2019, June). Strongly coupled thermo-mechanical casing/abradable model for rotor/stator interactions [Paper]. ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition (GT 2019), Phoenix, AZ, United states. External link
Parmigiani, A., Di Palma, P. R., Leclaire, S., Habib, F., & Kong, X.-Z. (2019). Characterization of transport-enhanced phase separation in porous media using a Lattice-Boltzmann method. Geofluids, 2019, 1-13. Available
Pérez, J., Trépanier, J.-Y., Reggio, M., & Leclaire, S. (2019, February). Lattice Boltzmann Approach for the Modelling and Simulation of a Water Droplet Impact and Freezing [Poster]. Simulation-Based Engineering Science Day, Montréal, Québec. Unavailable
Perreault, P., Robert, É., & Patience, G. S. (2019). Experimental methods in chemical engineering: Mass spectrometry-MS. Canadian Journal of Chemical Engineering, 97(5), 1036-1042. External link
Pichon, H., Piollet, E., & Ross, A. (2019). An acoustic trade-off chart for the design of multilayer acoustic packages. Applied Acoustics, 148, 9-18. External link
Pichon, H., Piollet, E., & Ross, A. (2019, July). Visualizing trade-offs to improve multilayer acoustic package design [Paper]. 26th International Congress on Sound and Vibration (ICSV 2019), Montréal, Qc, Canada. Unavailable
Pierre, J., Farahani, R. D., & Therriault, D. (2019). Objective 3: Additive manufacturing of acoustic sandwich panels using the materials developed in O1. (Technical Report). Unavailable
Piollet, E., Fotsing, E. R., Ross, A., & Michon, G. (2019). High damping and nonlinear vibration of sandwich beams with entangled cross-linked fibres as core material. Composites Part B: Engineering, 168, 353-366. External link
Piollet, E., Nyssen, F., & Batailly, A. (2019). Blade/casing rubbing interactions in aircraft engines: Numerical benchmark and design guidelines based on NASA rotor 37. Journal of Sound and Vibration, 460, 30 pages. External link
Plante, F., Dandois, J., & Laurendeau, É. (2019, January). Similitude between 3D cellular patterns in transonic buffet and subsonic stall [Paper]. AIAA Scitech Forum, San Diego, California. External link
Plastre, L. (2019). Prédiction de l'érosion de cavitation par une méthode multi-échelle [Master's thesis, Polytechnique Montréal]. Available
Plastre, L., Devals, C., Gauthier, M., Nennemann, B., Trépanier, J.-Y., & Guibault, F. (2019, October). Cavitation erosion prediction based on a multi-scale method [Paper]. 8th IAHR International Workshop on Cavitation and Dynamic Problems in Hydraulic Machinery and Systems (IAHR 2019), Stuttgart, Germany (7 pages). External link
Prakash, A. (2019). RANS Computation of Heat Transfer Over Rough Surfaces [Master's thesis, Polytechnique Montréal]. Available
Prakash, A., & Laurendeau, É. (2019, June). A wall function approach to account for rough surface heat transfer in Spalart-Allmaras turbulence model [Paper]. AIAA Aviation 2019 Forum, Reston, VA (23 pages). External link
Raison, M. (2019, March). Brings together more than two hundred public and private surgeons from Francophone countries [Presentation]. In Congrès annuel de la Société Française d'Orthopédie Pédiatrique (SOFOP 2019), Brussels, Belgium. Unavailable
Raison, M. (2019, May). Conception et fabrication additive en robotique d'assistance - Design and additive manufacturing in robotics assistance [Presentation]. In Forum Franco-Québecois - Innovation en santé (FFQIS), Paris, France. Unavailable
Raison, M. (2019, October). Robotics, assistive technologies, intelligent materials, and 3D prototyping for rehabilitation [Presentation]. In Congrès annuel de l'Association des physiciens et ingénieurs biomédicaux du Québec 2019 (APIBQ), Mont Saint-Anne, Canada. Unavailable
Raison, M., Gaudet, G., Blanchet, L., Lecours, S., Clark, E., & Achiche, S. (2019, October). Review: pediatric assistance robotics [Paper]. 34e Congrès de la Société Française de Médecine Physique et de Réadaptation (SOFMER 2019), Bordeaux, France. Unavailable
Rajesh, P. S. M., Delaroa, C., Gagne, M., Sapieha, J.-E., Sirois, F., & Therriault, D. (2019). Continuous and selective-area coating of silver on fiber-reinforced polymer composites for aerospace applications. Materials Today Communications, 18, 206-212. External link
Rastegar Talzali, S. (2019). Biomechanical Modeling of Transforaminal Lumbar Interbody Fusion: A Comparative Assessment of Segmental Lumbar Lordosis and Risk of Cage Subsidence With Different Cage Heights and Placements [Master's thesis, Polytechnique Montréal]. Available
Robitaille, B. (2019). Analyse des propriétés mécaniques de joints à recouvrement en aluminium 2024-T3 AlClad soudés par friction-malaxage et impact de la préparation de surface [Master's thesis, Polytechnique Montréal]. Available
Rohart, V., Dubé, M., & Laberge Lebel, L. (2019, August). Improvement of the lap shear strength of resistance-welded thermoplastic composite joints using a silane sol-gel coating on the stainless-steel heating element [Presentation]. In 22nd International Conference on Composite Materials (ICCM 2019), Melbourne, Australia. External link
Rohart, V., Dube, M., & Laberge Lebel, L. (2019). Lap shear strength effects of temperature on the apparent lap shear strength of resistance-welded carbon fibre/thermoplastic composite joints. SAMPE Journal, 55(3), 30-37. Unavailable
Saidi, H. (2019). Modélisation de pompes à chaleur à multiple compresseurs [Master's thesis, Polytechnique Montréal]. Available
Sarcher, A., Brochard, S., Perrouin-Verbe, B., Raison, M., Letellier, G., Leboeuf, F., & Gross, R. (2019). Detection of pronator muscle overactivity in children with unilateral spastic cerebral palsy: development of a semi-automatic method using EMG data. Annals of Physical and Rehabilitation Medicine, 62(6), 409-417. External link
Sarcher, A., Brochard, S., Perrouin‐Verbe, B., Raison, M., Letellier, G., Leboeuf, F., & Gross, R. (2019, May). Surface EMG is essential for distinguishing overactive pronator(s) during active supination in children with unilateral spastic cerebral palsy [Abstract]. 31st Annual Meeting of the European Academy of Childhood Disability (EACD), Paris, France. Published in Developmental Medicine & Child Neurology, 61(S2). External link
Sarcher, A., Gross, R., Perrouin‐Verbe, B., Raison, M., Letellier, G., & Brochard, S. (2019, May). Implementation of a clinical upper limb movement analysis for children with elbow movements' disorders [Abstract]. 31st Annual Meeting of the European Academy of Childhood Disability (EACD), Paris, France. Published in Developmental Medicine & Child Neurology, 61(S2). External link
Sarwark, J. F., Castelein, R. M., Maqsood, A., & Aubin, C.-É. (2019). The biomechanics of induction in adolescent idiopathic scoliosis: Theoretical factors. Journal of Bone and Joint Surgery-American Volume, 101(6), e22 (6 pages). External link
Sharifi, M., Shirazi-Adl, A., & Marouane, H. (2019). Sensitivity of the knee joint response, muscle forces and stability to variations in gait kinematics-kinetics. Journal of Biomechanics, 99, 10 pages. External link
Siguerdidjane, W., Khameneifar, F., Gosselin, F., & Levasseur, G. (2019, March). A deep learning approach to solving the peen forming inverse problem [Abstract]. APS March Meeting 2019, Boston, Massachusetts. Published in Bulletin of the American Physical Society, 64(2). External link
Simard, V. (2019). Intégration de structures absorbantes acoustiques innovantes au sein d'une turbosoufflante [Master's thesis, Polytechnique Montréal]. Available
Simon, G. (2019). Étude d'un critère de décollement lagrangien sur des écoulements instationnaires complexes [Master's thesis, Polytechnique Montréal]. Available
Spitler, J., & Bernier, M. (2019). Ground-source heat pump systems: state-of-the-art. Science and Technology for the Built Environment, 25(8), 945-946. External link
Sterba, M., Aubin, C.-É., Wagnac, E., Fradet, L., & Arnoux, P.-J. (2019). Effect of impact velocity and ligament mechanical properties on lumbar spine injuries in posterior-anterior impact loading conditions: a finite element study. Medical and Biological Engineering and Computing, 57(6), 1381-1392. External link
Strugala, G., Kummert, M., & Kegel, M. (2019, September). Experimental testing and modelling of a variable capacity air-to-air heat pump in cooling mode [Paper]. 16th International Conference of the International Building Performance Simulation Association (Building Simulation 2019), Rome, Italy. Unavailable
Tabiai, I., Texier, D., Bocher, P., Therriault, D., & Lévesque, M. (2019). In-situ Full Field Out of Plane Displacement and Strain Measurements at the Micro-Scale in Single Reinforcement Composites under Transverse Load. Experimental Mechanics, 60(3), 359-377. External link
Tabiai, I., Tkachev, G., Diehl, P., Frey, S., Ertl, T., Therriault, D., & Lévesque, M. (2019). Hybrid image processing approach for autonomous crack area detection and tracking using local digital image correlation results applied to single-fiber interfacial debonding. Engineering Fracture Mechanics, 216, 17 pages. External link
Therriault, D., & Farahani, R. D. (2019, August). From the microfabrication of microvascular networks to the additive manufacturing of multifunctional composites [Presentation]. In 22nd International Conference on Composite Materials (ICCM22), Melbourne, Australia. Unavailable
Tucny, J.-M., Vidal, D., Leclaire, S., & Bertrand, F. (2019, February). A new Lattice-Boltzmann method for the simulation of rarefied gas flows in complex porous media [Poster]. Simulation-Based Engineering Science Day, Montréal, Québec. Unavailable
Velasco Acosta, A. P., Mascle, C., & Baptiste, P. (2019). Applicability of Demand-Driven MRP in a complex manufacturing environment. International Journal of Production Research, 58(14), 4233-4245. External link
Vo, M., Mehrabian, S., Étienne, S., Pelletier, D., & Cameron, C. B. (2019). The hemichordate pharynx and gill pores impose functional constraints at small and large body sizes. Biological Journal of the Linnean Society, 127(1), 75-87. External link
Wang, X., Aubin, C.-É., Armstrong, R., & Rawlinson, J. (2019, October). Biomechanical effects of additional rods in spinal instrumentation with pedicle subtraction osteotomy [Paper]. 49e Réunion annuelle de la Société de scoliose du Québec, Québec City, Québec, Canada. Unavailable
Wang, X., Aubin, C.-É., Ritzman, T., McBride, L., Rawlinson, J., & Diaz, C. (2019). Differential Rod Contouring Simulation. (Technical Report). Unavailable
Wang, X., Yeung, K., Cheung, J. P. Y., Lau, J. Y.-N., Qi, W., Cheung, K. M.-C., & Aubin, C.-É. (2019, July). A Novel Superelastic Shape-Memory Rod Provides More Options for Optimal AIS Correction: Biomechanical Analysis of A Clinical Trial with 5-Year Follow-Up [Paper]. 26th International Meeting on Advanced Spine Techniques (IMAST 2019), Amsterdam, The Netherlands. Unavailable
Wei, H., Cauchy, X., Navas, I. O., Abderrafai, Y., Chizari, K., Sundararaj, U., Liu, Y., Leng, J., & Therriault, D. (2019). Direct 3D Printing of Hybrid Nanofiber-Based Nanocomposites for Highly Conductive and Shape Memory Applications. ACS Applied Materials and Interfaces, 11(27), 24523-24532. External link
Wu, Y. (2019). Investigating the Durability of Stellitte Hardfacing Components Used in the Power Generation Industry [Ph.D. thesis, Polytechnique Montréal]. Available
Wu, Y., Bousser, É., Schmitt, T., Tarfa, N., Khelfaoui, F., Rene, R., Sapieha, J.-E., & Brochu, M. (2019). Thermal stability of a Stellite/steel hardfacing interface during long-term aging. Materials Characterization, 154, 181-192. External link
Xing, K. (2019). Volumetric Error-Based Condition and Health Monitoring System for Machine-Tools [Ph.D. thesis, Polytechnique Montréal]. Available
Xing, K., Achiche, S., & Mayer, J. R. R. (2018, December). The Effects of Machine Tool Pallet Change on Machine Tool Geometric Measurement Using the Scale and Master Ball Artefact Method (SAMBA) [Paper]. International Conference on Advances in Engineering Research and Application (ICERA 2018), Thai Nguyen, Vietnam. External link
Xing, K., Achiche, S., & Mayer, J. R. R. (2019). Five-axis machine tools accuracy condition monitoring based on volumetric errors and vector similarity measures. International Journal of Machine Tools & Manufacture, 138, 80-93. External link
Xing, K., Mayer, J. R. R., & Achiche, S. (2019, June). Application of EWMA control chart on volumetric errors change recognition [Paper]. Joint CSME-CFDSC International Congress, London, ON. External link
Xing, K., Rimpault, X., Mayer, J. R. R., Chatelain, J.-F., & Achiche, S. (2019). Five-axis machine tool fault monitoring using volumetric errors fractal analysis. CIRP Annals, 168(1), 555-558. External link
Xu, C., Quinn, B., Laberge Lebel, L., Therriault, D., & L'Espérance, G. (2019). Multi-Material Direct Ink Writing (DIW) for Complex 3D Metallic Structures with Removable Supports. ACS Applied Materials and Interfaces, 11(8), 8499-8506. External link
Xu, C., Therriault, D., Laberge Lebel, L., L'Espérance, G., & Bouchemit, A. (2019). 3D printing of metallic inks and subsequent heat-treatments. (Patent Application no. US20190054536). External link
Younsi, R. (2019, March). Using experimental investigation for educational purposes: Characterization of a centrifugal fan [Paper]. 13th International Technology, Education and Development Conference (INTED 2019), Valencia, Spain. External link
Zoghlami, S., Béguin, C., Étienne, S., Teyssedou, A., Scott, D., & Bornard, L. (2019, September). Small bubble cloud configuration effect on added mass for euler-euler modeling [Paper]. 38th IAHR World Congress, Panama City, Panama. External link