![]() | Monter d'un niveau |
Abbad, A., Lassoued, M.-A. B., Michon, G., & Ross, A. (juillet 2019). On the use of 3D printed architected core in sandwich structure for vibration control [Communication écrite]. 26th International Congress on Sound and Vibration (ICSV 2019), Montréal, Qc, Canada. Non disponible
Abderrefai, Y., Diouf Lewis, A., Farahani, R. D., & Therriault, D. (2019). Objective 1: Design and formulate different HTRT materials (PEI or PEEK) reinforced with carbon fibers. (Rapport technique). Non disponible
Absi, C., Assi, P., Bureau, A., Cameron, E., Dimas, E., Dupont, S., & Laberge Lebel, L. (août 2019). Carbon fiber/PEEK rivets for fastening composites structures [Présentation]. Dans 22nd International Conference on Composite Materials (ICCM 2019), Melbourne, Australia. Lien externe
Absi, C., Assi, P., Bureau, A., Cameron, E., Dimas, E., Dupont, S., & Laberge Lebel, L. (mai 2019). Joining Composite Using Carbon Fiber/PEEK Rivets [Présentation]. Dans 5th CASI Aerospace Manufacturing Technologies Symposium, Laval, Québec. Non disponible
Agrapart, Q., Nyssen, F., Lavazec, D., Dufrenoy, P., & Batailly, A. (2019). Multi-physics numerical simulation of an experimentally predicted rubbing event in aircraft engines. Journal of Sound and Vibration, 460, 25 pages. Lien externe
Ajaja, J. (2019). Influence of Hard Turning on the Surface Characteristics and Fatigue Life of 300M Ultra-High Strenght Steel [Thèse de doctorat, Polytechnique Montréal]. Disponible
Ajaja, J., Jomaa, W., Bocher, P., Chromik, R., Songmene, V., & Brochu, M. (2019). Hard turning multi-performance optimization for improving the surface integrity of 300M ultra-high strength steel. The International Journal of Advanced Manufacturing Technology, 104(1-4), 141-157. Lien externe
Alsinani, N., & Laberge Lebel, L. (septembre 2019). Thermoplastic pultrusion's cooling temperature effects on pulling forces and deconsolidation [Communication écrite]. 19th Annual SPE Automotive Composites Conference & Exhibition (ACCE 2019), Novi, Michigan (10 pages). Non disponible
Alyaldin, L., & Mureithi, N. W. (juillet 2019). Equivalent theodorsen function for fluidelastic excitation in a normal triangular array [Communication écrite]. ASME 2019 Pressure Vessels and Piping Conference (PVP 2019), San Antonio, TX, United states (7 pages). Lien externe
Ammar, S., & Lefebvre, S. (juin 2019). Formative evaluation in the service of active learning [Communication écrite]. EdMedia + Innovate Learning 2019, Amsterdam, Netherlands. Lien externe
Anne, F., Béguin, C., Étienne, S., Causse, P., Scott, D., & Bornard, L. (septembre 2019). Void fraction and bubble size measurement inside clouds of air bubbles in flowing water [Communication écrite]. 38th IAHR World Congress, Panama City, Panama. Lien externe
Arabi, S., Trépanier, J.-Y., & Camarero, R. (2019). A simple extension of Roe's scheme for multi-component real gas flows. Journal of Computational Physics, 388, 178-194. Lien externe
Arriagada, J., Gschwender, A., Munizaga, M. A., & Trépanier, M. (2019). Modeling bus bunching using massive location and fare collection data. Journal of Intelligent Transportation Systems : Technology, Planning, and Operations, 23(4), 332-344. Lien externe
Asadi, R., Yeganefar, A., & Niknam, S. A. (2019). Optimization and prediction of surface quality and cutting forces in the milling of aluminum alloys using ANFIS and interval type 2 neuro fuzzy network coupled with population-based meta-heuristic learning methods. International Journal of Advanced Manufacturing Technology, 105(5-6), 2271-2287. Lien externe
Aubin, C.-É., & Wang, X. (2019). Biomechanics of Sagittal Balance – Modeling of the Spine. Dans Roussouly, P., Pinheiro-Franco, J. L., Labelle, H., & Gehrchen, M. (édit.), Sagittal Balance of the Spine – From Normal to Pathology: A Key for Treatment Strategy . Lien externe
Aubin, C.-É., Armstrong, R., Rawlinson, J., & Wang, X. (juin 2019). How do additional rods reduce loading of the primary rods in adult spinal instrumentation with pedicle subtraction osteotomy? [Communication écrite]. 2nd International Combined Meeting of Orthopaedic Research Societies (ICORS) and the Canadian Orthopaedic Association and Canadian Orthopaedic Research Society, Montréal, Québec, Canada. Non disponible
Aujogue, N. (2019). Application de l'holographie acoustique transitoire au contrôle non destructif de structures [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Aujogue, N., & Ross, A. (juillet 2019). Transient force analysis technique to identify time-varying loads and defects on plates [Communication écrite]. 26th International Congress on Sound and Vibration (ICSV 2019), Montréal, Qc, Canada. Non disponible
Bag, A. (2019). Effect of Shot Peening on the Axial Fatigue Life of 300M Steel [Thèse de doctorat, Polytechnique Montréal]. Disponible
Bag, A., Delbergue, D., Bocher, P., Lévesque, M., & Brochu, M. (2019). Statistical analysis of high cycle fatigue life and inclusion size distribution in shot peened 300M steel. International Journal of Fatigue, 118, 126-138. Lien externe
Bag, A., Lévesque, M., & Brochu, M. (2019). Effect of shot peening on short crack propagation in 300M steel. International Journal of Fatigue, 131, 105346 (9 pages). Lien externe
Bahloul, A., Djebara, A., Saidi, M. N., Songmene, V., Villalpando, F., & Reggio, M. (2019). Computational and Experimental Analysis of Ultrafine Particle Dispersion During Granite Polishing. Aerosol Science and Engineering, 3(1), 21-31. Lien externe
Bahloul, A., Jorge, R. F. V., Djebara, A., Songmene, V., Saidi, M. N., Kouam, J., Reggio, M., & Villalpando, F. (2019). Transformation du granit : caractérisation et contrôle de la poussière de la silice émise par le polissage. (Rapport technique n° R-1054). Lien externe
Bakhta, A., Leclaire, S., Vidal, D., Bertrand, F., & Cheriet, M. (2019). Multiscale simulation of ink seepage into paper: A mesoscopic variational model. Computer Physics Communications, 239, 1-13. Lien externe
Bakhtiari, M., Lakis, A. A., & Kerboua, Y. (2019). Derivatives of fourth order Kronecker power systems with applications in nonlinear elasticity. Applied Mathematics and Computation, 362(362), 14 pages. Lien externe
Beaini, D. (2019). Green Function and Electromagnetic Potential for Computer Vision and Convolutional Neural Network Applications [Thèse de doctorat, Polytechnique Montréal]. Disponible
Beaini, D., Achiche, S., & Raison, M. (2019). Object analysis in images using electric potentials and electric fields. (Demande de brevet no US20190277618). Lien externe
Béland, M., deChamplain, A., Kalla, S., & Robert, É. (juin 2019). Scaling Methodology of the FAA Burner for Pre-Qualification Fire Tests of Aircraft Engine Panels [Communication écrite]. ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition, Phoenix, Arizona (11 pages). Lien externe
Belanger, M.-C., Forcier, P., Gendreau, Y., Bujold, A., Pesant, S., Page, S., & Laberge Lebel, L. (septembre 2019). Effect of tailored fiber placement threads on carbon/epoxy composite impact resistance [Communication écrite]. 6th Annual Composites and Advanced Materials Expo (CAMX 2019), Anaheim, CA, USA. Lien externe
Ben Lassoued, M. A. (2019). Localisation et concentration d'énergie vibratoire dans une structure composite de type sandwich [Thèse de doctorat, Polytechnique Montréal]. Disponible
Benoit, D. (2019). Biomechanical Simulator for the Surgical Correction of Sagittal Balance in Adult Spinal Deformity [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Bernier, M. (2019). A review of vertical ground heat exchanger sizing tools including an inter-model comparison. Renewable and Sustainable Energy Reviews, 110, 247-265. Disponible
Bernier, M., & Brussieux, Y. (2019). Universal short time g*-functions : generation and application. Science and Technology for the Built Environment, 25(8), 993-1006. Disponible
Beurcq, C. (2019). Control Strategies for Standing Column Wells in a Cold Climate [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Bianco, R.-J., Arnoux, P.-J., Mac-Thiong, J.-M., & Aubin, C.-É. (2019). Thoracic pedicle screw fixation under axial and perpendicular loadings: A comprehensive numerical analysis. Clinical Biomechanics, 68, 190-196. Lien externe
Bidhendi, A. J., Altartouri, B., Gosselin, F., & Geitmann, A. (2019). Mechanical stress initiates and sustains the morphogenesis of wavy leaf epidermal cells. Cell Report, 28(5), 1237-1250.e6. Disponible
Birglen, L. (2019). Design of a partially-coupled self-adaptive robotic finger optimized for collaborative robots. Autonomous Robots, 43(2), 523-538. Disponible
Birglen, L., & Gouttefarde, M. (mai 2019). Comparison of redundancy resolution methods for a cable-suspended spatial parallel robot [Comparaison de méthodes de résolution de la redondance d'un robot parallèle spatial suspendu à câbles]. [Communication écrite]. CCToMM Mechanisms, Machines, and Mechatronics Symposium (M3 2019), Montréal, Qc, Canada (12 pages). Lien externe
Birglen, L., & Gouttefarde, M. (juin 2019). Stiffness of planar 2-DOF 3-differential cable-driven parallel robots [Communication écrite]. 4th International Conference on Cable-Driven Parallel Robots, Krakow, Poland. Lien externe
Bodkhe, S., Therriault, D., Gosselin, F., & Rui, T. (2019). Piezoelectric composite, ink and ink cartridge for 3D printing, bifunctional material comprising the piezoelectric composite, manufacture and uses thereof. [Composite piézoélectrique, encre et cartouche d'encre pour l'impression (3d), matériau bifonctionnel comprenant le composite piézoélectrique, leur fabrication et utilisations]. (Demande de brevet no US20190284423). Lien externe
Bougrinat, Y., Achiche, S., & Raison, M. (2019). Design and development of a lightweight ankle exoskeleton for human walking augmentation. Mechatronics, 64, 12 pages. Lien externe
Boulos, P. (2019). Formulation faible des équations de Navier-Stokes non inertielle en rotation pure en éléments finis spectraux [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Boulvert, J., Cavalieri, T., Costa-Baptista, J., Schwan, L., Romero-Garcia, V., Gabard, G., Fotsing, E.-R., Ross, A., Mardjono, J., & Groby, J.-P. (2019). Optimally graded porous material for broadband perfect absorption of sound. Journal of Applied Physics, 126(17), 15 pages. Lien externe
Boulvert, J., Cavalieri, T., Romero-Garcia, V., Gabard, G., Fotsing, E. R., Ross, A., Mardjono, J., & Groby, J.-P. (juillet 2019). Numerical optimization method of continuously graded porous material [Communication écrite]. 26th International Congress on Sound and Vibration (ICSV 2019), Montréal, Qc, Canada. Non disponible
Bourgault-Côté, S. (2019). Ice Interface Evolution Modelling Algorithms for Aircraft Icing [Thèse de doctorat, Polytechnique Montréal]. Disponible
Bourgault-Cote, S., Docampo-Sanchez, J., & Laurendeau, É. (2019). Multilayer Airfoil Ice Accretion Simulations Using a Level-Set Method with B-Spline Representation. AIAA Journal, 57(8), 3299-3308. Lien externe
Bourgault-Cote, S., Parenteau, M., & Laurendeau, É. (mars 2019). Quasi-3D multi-layer ice accretion model using a Vortex Lattice Method combined with 2.5D RANS solutions [Communication écrite]. 54th 3AF International Conference on Applied Aerodynamics, Paris, France (7 pages). Non disponible
Bouscarrat, D. (2019). Time-Dependent Damage in Woven-Ply Thermoplastic Composites Above Glass Transition Temperature [Thèse de doctorat, Polytechnique Montréal]. Disponible
Bretin, R., Lévesque, M., & Bocher, P. (2019). Neighborhood effect on the strain distribution in linearly elastic polycrystals: Part 1 - Finite element study of the interaction between grains. International Journal of Solids and Structures, 176-177, 36-48. Lien externe
Bretin, R., Lévesque, M., & Bocher, P. (2019). Neighborhood effect on the strain distribution in linearly elastic polycrystals: Part 2 - Cellular Automaton. International Journal of Solids and Structures, 176-177, 49-67. Lien externe
Breumier, S., Sao-Joao, S., Villani, A., Baltazar, J., Lévesque, M., & Kermouche, G. (septembre 2019). Nanomechanical testing for crystal plasticity constitutive framework identification at high strain rates [Communication écrite]. VII Nanomechanical Testing in Materials Research and Development, Melia Costa Del Sol, Malaga, Spain. Non disponible
Breumier, S., Villani, A., Maurice, C., Lévesque, M., & Kermouche, G. (2019). Effect of crystal orientation on indentation-induced residual stress field: Simulation and experimental validation. Materials & Design, 169. Disponible
Brussieux, Y. (2019). Facteurs de réponse de puits géothermiques pour courts pas de temps [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Burgarella, B., & Laberge Lebel, L. (juillet 2019). Multi-scale finite element analysis of braids and bundles of filaments using embedded elements [Présentation]. Dans 11th Canadian-International Conference on Composites, Kelona, Colombie-Britannique. Non disponible
Butler, S., Fotsing, E. -R., & Ross, A. (2019). Acoustic thermoset open-cell foams produced by particulate leaching process. Journal of Materials Science, 54(19), 12553-12572. Lien externe
Butler, S., Fotsing, E. R., & Ross, A. (juillet 2019). Acoustic thermoset open-cell multilayer foams produced by a particulate leaching process [Communication écrite]. 26th International Congress on Sound and Vibration (ICSV 2019), Montréal, Qc, Canada. Non disponible
Canals, L., Badreddine, J., McGillivray, B., Miao, H. Y., & Lévesque, M. (2019). Effect of vibratory peening on the sub-surface layer of aerospace materials Ti-6Al-4V and E-16NiCrMo13. Journal of Materials Processing Technology, 264, 91-106. Lien externe
Caru, M., Corbin, D., Périé-Curnier, D., Lemay, V., Delfrate, J., Drouin, S., Bertout, L., Krajinovic, M., Laverdiere, C., Andelfinger, G., Sinnett, D., & Curnier, D. (2019). Doxorubicin treatments induce significant changes on the cardiac autonomic nervous system in childhood acute lymphoblastic leukemia long-term survivors. Clinical Research in Cardiology, 108(9), 1000-1008. Lien externe
Cavalieri, T., Boulvert, J., Schwan, L., Gabard, G., Romero-Garcia, V., Groby, J.-P., Escouflaire, M., & Mardjono, J. (2019). Acoustic wave propagation in effective graded fully anisotropic fluid layers. Journal of the Acoustical Society of America, 146(5), 3400-3408. Lien externe
Chakour, T. (2019). Assessment of Flow Unsteadiness in Turbocharger Compressor [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Chauvette, J.-F., Piccirelli, N., & Therriault, D. (octobre 2019). Rapid direct deposition of filled polymer on non-planar surface [Communication écrite]. 30th International Conference on Adaptive Structures and Technologies (ICAST 2019), Montréal, Qc, Canada. Lien externe
Chávez Gómez, P., Pelzmann, T., Langot, J., Robert, É., & Laberge Lebel, L. (août 2019). Fuel effect on the tensile strength evolution of carbon fibers under direct flame attack [Affiche]. 22nd International Conference on Composite Materials (ICCM 2019), Melbourne, Australia. Lien externe
Chávez, P., Pelzmann, T., Robert, É., & Laberge Lebel, L. (janvier 2019). Evaluation of the fire resistance of protected carbon/epoxy laminates in small-scale experiments [Communication écrite]. AIAA Scitech Forum, San Diego, California. Lien externe
Chouinard, U. (2019). On the Mitigation of Late Stage Redesign in Mechatronics Using Integrated Approaches [Thèse de doctorat, Polytechnique Montréal]. Disponible
Chouinard, U., Achiche, S., & Baron, L. (2019). Integrating negative dependencies assessment during mechatronics conceptual design using fuzzy logic and quantitative graph theory. Mechatronics, 59, 140-153. Lien externe
Chouinard, U., Achiche, S., Santos, I., & Baron, L. (mars 2019). Robust design support using fuzzy simulation of uncertain dynamic system : a self balancing robot case study [Communication écrite]. 15th International Symposium on Dynamic Problems of Mechanics (DINAMW 2019), Buzios, Brazil. Non disponible
Chouinard, U., Pigosso, D. C. A., McAloone, T. C., Baron, L., & Achiche, S. (2019). Potential of circular economy implementation in the mechatronics industry: An exploratory research. Journal of Cleaner Production, 239, 12 pages. Lien externe
Cianfoni, A., Distefano, D., Scarone, P., Pesce, G. A., Espeli, V., La Barbera, L., Villa, T., Reinert, M., Bonaldi, G., & Hirsch, J. A. (2019). Stent screw–assisted internal fixation (SAIF): clinical report of a novel approach to stabilizing and internally fixating vertebrae destroyed by malignancy. Journal of Neurosurgery: Spine SPI, 32(4), 507-518. Lien externe
Cimmino, M. (2019). Semi-Analytical Method for g-Function Calculation of bore fields with series- and parallel-connected boreholes. Science and Technology for the Built Environment, 25(9), 1007-1022. Disponible
Cimmino, M., & Baliga, B. R. (2019). A hybrid numerical-semi-analytical method for computer simulations of groundwater flow and heat transfer in geothermal borehole fields. International Journal of Thermal Sciences, 142, 366-378. Disponible
Cimmino, M., & Laferrière, A. (2019). Linear model predictive control for the reduction of auxiliary electric heating in residential self-assisted ground-source heat pump systems. Science and Technology for the Built Environment, 25(8), 1095-1110. Disponible
Cio, Y.-S. L.-K., Raison, M., Leblond Menard, C., & Achiche, S. (2019). Proof of Concept of an Assistive Robotic Arm Control Using Artificial Stereovision and Eye-Tracking. IEEE Transactions on Neural Systems and Rehabilitation Engineering, 27(12), 2344-2352. Lien externe
Corcoran, A., Eslami Nejad, P., Bernier, M., & Badache, M. (2019). Calibration of thermal response test (TRT) units with a virtual borehole. Geothermics, 79, 105-113. Disponible
Costa-Baptista, J., Fotsing, E. R., Therriault, D., & Ross, A. (juillet 2019). Impact of 3D printed thin wall on Helmholtz resonator acoustic response: Experimental investigatations [Communication écrite]. 26th International Congress on Sound and Vibration (ICSV 2019), Montréal, Qc, Canada. Non disponible
Coudert, P., Dubé-Cyr, R., Chaumoitre, K., Gille, O., Vital, J.-M., Jouve, J.-L., Arnoux, P.-J., Panuel, M., & Evin, M. (2019). Sacroiliac joint morphologic changes from infancy to adulthood. Spine Journal, 19(10), 1730-1738. Lien externe
Courtois, A., Marcin, L., Benavente, M., Ruiz, E., & Lévesque, M. (2019). Numerical multiscale homogenization approach for linearly viscoelastic 3D interlock woven composites. International Journal of Solids and Structures, 163, 61-74. Lien externe
Cusson, E., Akbarzadeh, A. H., Therriault, D., & Rodrigue, D. (2019). Density graded polyethylene foams: Effect of processing conditions on mechanical properties. Cellular Polymers, 38(1-2), 3-14. Lien externe
Dayi, O. (2019). Méthodologie d'amélioration de l'agilité des chaînes logistiques - Application à une chaîne logistique d'un produit aéronautique [Thèse de doctorat, Polytechnique Montréal]. Disponible
Dehghan-Hamani, I., Arjmand, N., & Shirazi-Adl, A. (2019). Subject-specific loads on the lumbar spine in detailed finite element models scaled geometrically and kinematics-driven by radiography images. International Journal for Numerical Methods in Biomedical Engineering, 35(4), e3182 (32 pages). Lien externe
Delbergue, D., Texier, D., Lévesque, M., & Bocher, P. (2019). Diffracting-grain identification from electron backscatter diffraction maps during residual stress measurements: a comparison between the sin²ψ and cosα methods. Journal of Applied Crystallography, 52(4), 828-843. Lien externe
Delfour, M. C., Garon, A., & Lamontagne, S. (2019). Three-dimensional drug release in the stent-polymer-wall-lumen of a blood vessel. SIAM Journal on Applied Mathematics, 79(5), 1850-1871. Lien externe
Delgado Sedano, L. (2019). Uncertainty Modeling in Robotic Maintenance Using Computer Vision [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Dick, J.-S. (2019). Un nouveau modèle d'échange de masse et de quantité de mouvement entre formulation lagrangienne et eulérienne appliqué à une cavité de roulement de moteur d'avion [Thèse de doctorat, Polytechnique Montréal]. Disponible
Diehl, P., Prudhomme, S., & Lévesque, M. (2019). A Review of Benchmark Experiments for the Validation of Peridynamics Models. Journal of Peridynamics and Nonlocal Modeling, 1(1), 14-35. Lien externe
Diouf-Lewis, A., Iervolino, F., Abderrafai, Y., Pierre, J., Farahani, R. D., Piccirelli, N., & Therriault, D. (août 2019). Design of high temperature resistant thermoplastic composites for FDM 3D printing [Présentation]. Dans 22nd International Conference on Composite Materials (ICCM22), Melbourne, Australia. Non disponible
Douillet-Grellier, T., Leclaire, S., Vidal, D., Bertrand, F., & De Vuyst, F. (2019). Comparison of multiphase SPH and LBM approaches for the simulation of intermittent flows. Computational Particle Mechanics, 6(4), 695-720. Lien externe
Doulcet, B. (2019). Simulations des interactions fluide-structure par une formulation bilatérale fortement couplée sous OpenFOAM [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Doulcet, B., Devals, C., Nennemann, B., Gauthier, M., Guibault, F., & Trépanier, J.-Y. (octobre 2019). Two-way strongly coupled fluid-structure interaction simulations with OpenFOAM [Communication écrite]. 8th IAHR International Workshop on Cavitation and Dynamic Problems in Hydraulic Machinery and Systems (IAHR 2019), Stuttgart, Germany (7 pages). Lien externe
El Samrout, A., Braydi, O., Younes, R., Trochu, F., & Lafon, P. (2019). A New Hybrid Method to Solve the Multi-objective Optimization Problem for a Composite Hat-Stiffened Panel. Dans Bioinspired heuristics for optimization (Vol. 774, p. 77-88). Lien externe
Elzein, B., Xing, J., Jobin, O., & Robert, É. (août 2019). Combustion of aluminized solid propellants with bimodal oxidizer particle size distribution [Communication écrite]. AIAA Propulsion and Energy Forum and Exposition, Indianapolis, IN, United states. Lien externe
Eskandari, A. H., Arjmand, N., Shirazi-Adl, A., & Farahmand, F. (2019). Hypersensitivity of trunk biomechanical model predictions to errors in image-based kinematics when using fully displacement-control techniques. Journal of Biomechanics, 84, 161-171. Lien externe
Farahani, R. D., & Therriault, D. (2019). Advanced manufacturing of composites for structural and acoustic applications. (Rapport technique). Non disponible
Farahani, R. D., & Therriault, D. (2019). Advanced manufacturing of composites for structural and acoustic applications. (Rapport technique). Non disponible
Farahani, R. D., & Therriault, D. (2019). Advanced manufacturing of reinforced composites for aerospace applications – Phase 2. (Rapport technique). Non disponible
Farahani, R. D., & Therriault, D. (juillet 2019). Design of multifunctional composites and their multi-material additive manufacturing [Résumé]. International Conference on Advances in Functional Materials, Washington, DC, United States. Lien externe
Farahani, R. D., Hia, I. L., Chauvette, J.-F., Gregorio, P., Brzeski, D., & Therriault, D. (2019). Objective 4: Develop a printing process for direct deposition of acoustic abradable materials on composite structures featuring flat and curved geometries. (Rapport technique). Non disponible
Faucheux, P. (2019). Simulating Shot Peen Forming with Eigenstrains [Thèse de doctorat, Polytechnique Montréal]. Disponible
Fedorov, D. (2019). Conception de systèmes mécaniques auto-adaptatifs pour la locomotion [Thèse de doctorat, Polytechnique Montréal]. Disponible
Fedorov, D., & Birglen, L. (2019). Design of a Compliant Mechanical Device for Upper Leg Rehabilitation. IEEE Robotics and Automation Letters, 4(2), 870-877. Lien externe
Fernandez-Escudero, C., Gagnon, M., Laurendeau, É., Prothin, S., Michon, G., & Ross, A. (2019). Comparison of low, medium and high fidelity numerical methods for unsteady aerodynamics and nonlinear aeroelasticity. Journal of Fluids and Structures, 91, 12 pages. Lien externe
Fortin, S. (2019). Étude de bistabilité des bulles ellipsoïdales par une méthode ALE de résolution des écoulements diphasiques [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Fotsing, E.-R., Dubourg, A., Ross, A., & Mardjono, J. (2019). Acoustic properties of periodic micro-structures obtained by additive manufacturing. Applied Acoustics, 148, 322-331. Lien externe
Fotsing, E.-R., Rezabeigi, E., Ross, A., Wood-Adams, P. M., & Drew, R. A. L. (2019). Acoustical characteristics of ultralight polylactic acid foams fabricated via solution phase inversion. Journal of Porous Materials, 26(6), 1781-1794. Lien externe
Gad-el-Hak, I. (2019). Fluid-structure interaction for biomimetic design of an innovative lightweight turboexpander. Biomimetics, 4(1). Disponible
Gagnon, M. (2019). Nonlinear Aeroelastic Coupling of Aircraft Aerostructural Systems [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Gamache, J.-F., Vadean, A., & Achiche, S. (mai 2019). Validating Novel Stiffened Panel Configuration Generated with Topology Optimization using Non-Linear Analysis [Communication écrite]. Canadian Aeronautics and Space Institute (AERO 19), Laval, Québec, Canada (4 pages). Lien externe
Gamache, J.-F., Vadean, A., & Achiche, S. (mai 2019). Validating Novel Stiffened Panel Configuration Generated with Topology Optimization using Non-Linear Analysis [Communication écrite]. 39th Conference on Applied Statistics in Ireland (CASI 2019), Dublin, Ireland (4 pages). Non disponible
Gamdani, F., Boukhili, R., & Vadean, A. (2019). Tensile behavior of hybrid multi-bolted/bonded joints in composite laminates. International Journal of Adhesion and Adhesives, 95, 11 pages. Lien externe
Gaudet, S. (2019). Vérification de code pour le modèle k-ϵ standard de OpenFOAM [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Gaudreau, J., Mekhail, M., Hamdy, R., & Villemure, I. (2019). Remote-controlled internal lengthening plate for distraction osteogenesis in pediatric patients. Expert Review of Medical Devices, 16(4), 333-339. Lien externe
Gendreau, Y. (2019). Modélisation et simulation de composite à renfort fabriqué par broderie [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Gervais, B., Vadean, A., Brochu, M., & Raison, M. (2019). Rebuttal to comments by R. Dumas. Multibody System Dynamics, 47(4), 439-440. Lien externe
Ghaedsharaf, M., & Laberge Lebel, L. (avril 2019). The effect of braid angle on the void content and fiber misorientation of thermoplastic Diamond, Regular and Hercules braided rod manufacturing using braid-trusion [Présentation]. Dans 4th International Symposium on Automated Composites Manufacturing, Montréal, Québec. Non disponible
Ghaedsharaf, M., & Laberge Lebel, L. (mai 2019). The effect of braid pattern on the pulling force of thermoplastic braid-trusion [Présentation]. Dans 5th CASI Aerospace Manufacturing Technologies Symposium, Laval, Québec. Non disponible
Ghafoori-Ahangar, R., & Verreman, Y. (2019). Fatigue behavior of load-carrying cruciform joints with partial penetration fillet welds under three-point bending. Engineering Fracture Mechanics, 215, 211-223. Lien externe
Ghandali, P., Khameneifar, F., & Mayer, J. R. R. (2019). A pseudo-3D ball lattice artifact and method for evaluating the metrological performance of structured-light 3D scanners. Optics and Lasers in Engineering, 121, 87-95. Lien externe
Ghezelbash, F. (2019). Subject-Specific Computational Musculoskeletal Modeling of Human Trunk in Lifting : Role of Age, Sex, Body Weight and Body Height [Thèse de doctorat, Polytechnique Montréal]. Disponible
Giraud, A., Sevostianov, I., Kushch, V. I., Cosenza, P., Pret, D., Barthélémy, J. F., & Trofimov, A. (2019). Effective electrical conductivity of transversely isotropic rocks with arbitrarily oriented ellipsoidal inclusions. Mechanics of Materials, 133, 174-192. Lien externe
Gondran, M., Laberge Lebel, L., & Khameneifar, F. (décembre 2019). Development of an iterative braiding model with angle control and thickness measurement [Affiche]. Colloque Annuel du Centre de Recherche sur les Systèmes Polymères et Composites à haute performance CREPEC, Québec, Québec. Non disponible
Gosselin, F. (2019). Mechanics of a plant in fluid flow. Journal of Experimental Botany, 70(14), 3533-3548. Lien externe
Greffier, L. (2019). Perchage automatique de drones basé sur la vision artificielle [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Gunaydin, K., Eren, Z., Kazanci, Z., Scarpa, F., Grande, A. M., & Turkmen, H. S. (2019). In-plane compression behavior of anti-tetrachiral and re-entrant lattices. Smart Materials and Structures, 28(11), 14 pages. Lien externe
Hadji, A., & Mureithi, N. W. (2019). Validation of friction model parameters identified using the IHB method using finite element method. Shock and Vibration, 2019, 1-19. Disponible
Hashemiboroujeni, H., Esmaeili Marzdashti, S., Xing, K., & Mayer, J. R. R. (2019). Five-axis machine tool coordinate metrology evaluation using the ball dome artefact before and after machine calibration. Journal of Manufacturing and Materials Processing, 3(1), 20 (12 pages). Disponible
Hassan, A., Bagu, E. T., Lévesque, M., Patten, S. A., Benhadjeba, S., Edjekouane, L., Villemure, I., Tremblay, A., & Moldovan, F. (2019). The 17β-estradiol induced upregulation of the adhesion G-protein coupled receptor (ADGRG7) is modulated by ESRα and SP1 complex. Biology Open, 8(1), bio037390 (13 pages). Disponible
Hassan, A., Parent, S., Mathieu, H., Zaouter, C., Molidperee, S., Bagu, E. T., Barchi, S., Villemure, I., Patten, S. A., & Moldovan, F. (2019). Adolescent idiopathic scoliosis associated POC5 mutation impairs cell cycle, cilia length and centrosome protein interactions. PLOS One, 14(3), e0213269 (17 pages). Disponible
Hayi-Slayman, N. (2019). Projet de recherche biomédical: rapport d'analyse d'équipements du Technopôle. (Rapport d'étude - Cycles supérieurs). Disponible
Himmiche, S., Trofimov, A., Eren, Z., Farahani, R. D., Lévesque, M., & Therriault, D. (2019). Supplementary Objective 1: 3D reinforced composites manufactured by Resin Transfer Molding (RTM). (Rapport technique). Non disponible
Ho, M., Leclaire, S., Reggio, M., & Trépanier, J.-Y. (février 2019). Mesoscopic simulations of thermal protection systems using the lattice Boltzmann method [Affiche]. Simulation-Based Engineering Science Day, Montréal, Québec. Non disponible
Ho, M., Perez, J. G., Reggio, M., & Trépanier, J.-Y. (2019). Permeability calculation of rarefied gas flows through 2D porous structures using the lattice Boltzmann method. Physics and Chemistry of the Earth, Parts A/B/C, 113, 43-49. Lien externe
Ho, M., Pérez, J., Leclaire, S., Reggio, M., & Trépanier, J.-Y. (juin 2019). Investigation of advection-diffusion problems and simulations using the lattice Boltzmann method and the ArrayFire library for high-performance computing on GPU [Résumé]. Joint Canadian Society for Mechanical Engineering and CFD Society of Canada International Congress, London, Ontario. Lien externe
Hodonou, C., Balazinski, M., Brochu, M., & Mascle, C. (2019). Material-design-process selection methodology for aircraft structural components: application to additive vs subtractive manufacturing processes. International Journal of Advanced Manufacturing Technology, 103(1-4), 1509-1517. Lien externe
Huang, W., Causse, P., Brailovski, V., Hu, H., & Trochu, F. (2019). Reconstruction of mesostructural material twin models of engineering textiles based on Micro-CT Aided Geometric Modeling. Composites Part A: Applied Science and Manufacturing, 124, 20 pages. Lien externe
Huang, W., Huang, Q., Liu, Y., Yang, J., Hu, H., Trochu, F., & Causse, P. (2019). A Fourier based reduced model for wrinkling analysis of circular membranes. Computer Methods in Applied Mechanics and Engineering, 345, 1114-1137. Lien externe
Iervolino, F. (2019). Additive Manufacturing of Low and High Temperature Resistant Thermoplastic Composites and Sandwich Panels for Sound Absorption [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Iervolino, F., Pierre, J., Piccirelli, N., & Therriault, D. (août 2019). Additive manufacturing of composite sandwich panels for broadband sound absorption [Présentation]. Dans International Conference on Composite Materials (ICCM22), Melbourne, Australia. Non disponible
Imani, R. J., Ladhani, L., Pardon, G., van der Wijngaart, W., & Robert, É. (2019). The influence of air flow velocity and particle size on the collection efficiency of passive electrostatic aerosol samplers. Aerosol and Air Quality Research, 19(2), 195-203. Lien externe
Inaekyan, K., Kreitcberg, A., Turenne, S., & Brailovski, V. (2019). Microstructure and mechanical properties of laser powder bed-fused IN625 alloy. Materials Science and Engineering A, 768, 13 pages. Lien externe
Jankowski, M., Wozniak, A., & Mayer, J. R. R. (décembre 2018). On-machine and In-laboratory Investigation of Errors of Probes for CNC Machine Tools [Communication écrite]. International Conference on Advances in Engineering Resesarch and Application (ICERA 2018), Thai Nguyen, Vietnam. Lien externe
Jaramillo, A. M., Aubin, C.-É., Hachem, B., Londono, I., Pelletier, J., Parent, S., & Villemure, I. (2019). Mechanobiological analysis of porcine spines instrumented with intra-vertebral staples. Journal of Musculoskeletal & Neuronal Interactions, 19(1), 13-20. Lien externe
Javadi, H., Jomaa, W., Songmene, V., Brochu, M., & Bocher, P. (2019). Inconel 718 Superalloy Controlled Surface Integrity for Fatigue Applications Produced by Precision Turning. International Journal of Precision Engineering and Manufacturing, 20(8), 1297-1310. Lien externe
Joachim, J., Nyssen, F., & Batailly, A. (novembre 2019). Numerical investigation of an academic mistuned bladed disk dynamics accounting for blade/casing contacts [Communication écrite]. ASME 2019 International Mechanical Engineering Congress and Exposition, (IMECE 2019), Salt Lake City, UT, United states (10 pages). Lien externe
Kadoury, S., Knez, D., & Aubin, C.-É. (2019). Biomechanically driven intraoperative spine registration during navigated anterior vertebral body tethering. Physics in Medicine & Biology, 64(11), 115008 (28 pages). Lien externe
Karaki, M., Younes, R., Trochu, F., & Lafon, P. (2019). Progress in experimental and theoretical evaluation methods for textile permeability. Journal of Composites Science, 3(3), 28 pages. Disponible
Keshavarz, M. K., Lo, C.-W. T., Turenne, S., Mozharivskyj, Y., & Quitoriano, N. J. (2019). Hot Extrusion of ZnSb-Based Thermoelectric Materials; A Novel Approach for Scale-Up Production. Journal of Manufacturing and Materials Processing, 3(3), 58-58. Lien externe
Khameneifar, F. (juin 2019). Innovative strategies for assessing the metrological performance of optical 3D scanners [Résumé]. International Congress of the Canadian Society for Mechanical Engineering (CSME 2019), London, Ontario. Non disponible
Khameneifar, F., & Ghorbani, H. (2019). On the curvature estimation for noisy point cloud data via local quadric surface fitting. Computer-Aided Design and Applications, 16(1), 140-149. Lien externe
Kidikian, J. (2019). An Off-Design Mean-Line Methodology to Predict the Missing Data of Single-Stage Transonic Axial Compressor Tests [Thèse de doctorat, Polytechnique Montréal]. Disponible
Kliem, M., Høgsberg, J., Vanwalleghem, J., Filippatos, A., Hoschützky, S., Fotsing, E.-R., & Berggreen, C. (2019). Damping analysis of cylindrical composite structures with enhanced viscoelastic properties. Applied Composite Materials, 26(1), 85-113. Lien externe
Klotz, T., Lévesque, M., & Brochu, M. (2019). Effects of rolled edges on the fatigue life of shot peened Inconel 718. Journal of Materials Processing Technology, 263, 276-284. Lien externe
Kontogiannis, A., Parenteau, M., & Laurendeau, É. (janvier 2019). Viscous-Inviscid Analysis of Transonic Swept Wings using 2.5D RANS and Parametric Shapes [Communication écrite]. AIAA Scitech Forum, San Diego, California. Lien externe
Kreitcberg, A., Inaekyan, K., Turenne, S., & Brailovski, V. (2019). Temperature- and time-dependent mechanical behavior of post-treated IN625 alloy processed by laser powder bed fusion. Journal of Manufacturing and Materials Processing, 3(3), 75 (18 pages). Disponible
La Barbera, L., Cianfoni, A., Ferrari, A., Distefano, D., Bonaldi, G., & Villa, T. (2019). Stent Screw-Assisted Internal Fixation (SAIF) of Severe Lytic Spinal Metastases: A Comparative Finite Element Analysis of the SAIF Technique. World Neurosurgery, 128, E370-E377. Lien externe
La Barbera, L., Cianfoni, A., Ferrari, A., Distefano, D., Bonaldi, G., & Villa, T. (2019). Stent-screw assisted internal fixation of osteoporotic vertebrae: A comparative finite element analysis on SAIF technique. Frontiers in Bioengineering and Biotechnology, 7, 291 (11 pages). Disponible
La Barbera, L., Larson, A. N., Wang, X., & Aubin, C.-É. (mai 2019). Screw density and pattern have limited impact on the 3D correction of Lenke 1A curves [Communication écrite]. 34eme Congrès de la Recherche des étudiants des cycles supérieurs et des postdoctorants au Centre de recherche du Centre hospitalier universitaire Sainte-Justine, Montréal, Québec, Canada. Non disponible
La Barbera, L., Larson, A. N., Wang, X., & Aubin, C.-É. (avril 2018). Screw density has lower impact than correction objectives on 3D correction of Lenke 1A curves [Communication écrite]. 39e journée de la recherche du Programme d'orthopédie Édouward-Samson (POES) et de la division d'orthopédie de l'Université de Montréal, Montréal, Québec, Canada. Non disponible
Laberge Lebel, L., Dragutescu, M., Trudeau, P., Normandin, G., & Rifay, M. (2019). Device and method for positioning a ply of material of a composite component along an arcuate surface. (Demande de brevet no US20190329507). Lien externe
Lacombe, F., Pelletier, D., & Garon, A. (janvier 2019). Compatible wall functions and adaptive remeshing for the k-omega SST model [Communication écrite]. AIAA Scitech Forum, San Diego, California. Lien externe
Laferrière, A. (2019). Modélisation et commande prédictive de pompes à chaleur géothermiques résidentielles auto-assistées [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Lainé, J., Piollet, E., Nyssen, F., & Batailly, A. (2019). Blackbox Optimization for Aircraft Engine Blades With Contact Interfaces. Journal of Engineering for Gas Turbines and Power, 141(6), GTP-18-124 (16 pages). Lien externe
Lakis, A. A., Jalali, A. R., & Toorani, M. (2019). Coupled fluid-structure dynamics of composite plates. International Journal of Numerical Methods and Applications, 18(2), 43-88. Lien externe
Lalande, V. (2019). Conception et évaluation d'un prototype de modulation cyclique de la croissance des vertèbres pour le traitement de la scoliose idiopathique pédiatrique [Thèse de doctorat, Polytechnique Montréal]. Disponible
Lambert, L. (2019). Lois de paroi compatibles pour les modèles de turbulence à bas-Reynolds [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Lapointe, F., & Laberge Lebel, L. (2019). Fiber damage and impregnation during multi-die vacuum assisted pultrusion of carbon/PEEK hybrid yarns. Polymer Composites, 40(S2), E1015-E1028. Lien externe
Larouche Guilbert, M., Raison, M., Fortin, C., & Achiche, S. (2019). Development of a multibody model to assess efforts along the spine for the rehabilitation of adolescents with idiopathic scoliosis. Journal of Musculoskeletal and Neuronal Interact, 19(1), 9 pages. Lien externe
Lassoued, M. A. B., Abbad, A., Ross, A., & Michon, G. (juillet 2019). Numerical and experimental vibration of a sandwich beam with a functionally graded core [Communication écrite]. 26th International Congress on Sound and Vibration (ICSV 2019), Montréal, Qc, Canada. Non disponible
Lavoie, P., Blanchard, G., Radenac, E., Laurendeau, É., & Villedieu, P. (juin 2019). A Penalization Method for 2D Ice Accretion Simulations [Communication écrite]. SAE International Conference on Icing of Aircraft, Engines, and Structures, (ICE 2019), Minneapolis, MN, United states. Lien externe
Lebedev, O. V., Trofimov, A., Abaimov, S. G., & Ozerin, A. N. (2019). Modeling of an effect of uniaxial deformation on electrical conductance of polypropylene-based composites filled with agglomerated nanoparticles. International Journal of Engineering Science, 144, 14 pages. Lien externe
Lecours, S. (2019). Développement d'un exosquelette portable motorisé des membres supérieurs pour les enfants atteints de troubles neuromusculaires [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Leroy, L., Letellier-Duchesne, S., & Kummert, M. (septembre 2019). Using model calibration to improve urban modeling [Communication écrite]. 16th International Conference of the International Building Performance Simulation Association (Building Simulation 2019), Rome, Italy. Lien externe
Lessard, F., Boanta, C., Dubé, M., Laberge Lebel, L., & Robert, É. (août 2019). Impact of cellulose filaments on interlaminar properties, flammability and thermal degradation behavior of polymer matrix composites [Affiche]. 22nd International Conference on Composite Materials (ICCM 2019), Melbourne, Australia. Lien externe
Letellier-Duchesne, S. (2019). Planning and Integrated Design of Urban Heat-Sharing Networks [Thèse de doctorat, Polytechnique Montréal]. Disponible
Li, P. L. (2019). Exosquelette passif pour réduction de chargement lombaire pour levée de charge symétrique. (Rapport d'étude - Cycles supérieurs). Disponible
Lingua, A., Sosa Rey, F., Lévesque, M., & Therriault, D. (2019). Objective 2: Predict mechanical response of AM composites. (Rapport technique). Non disponible
Lombardo, C. (2019). Développement d'un programme de simulation numérique d'écoulements visqueux compressibles [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Loran, S., Cheng, S., Botton, G. A., Yahia, L., Yelon, A., & Sacher, E. (2019). The physicochemical characterization of the Cu nanoparticle surface, and of its evolution on atmospheric exposure: application to antimicrobial bandages for wound dressings. Applied Surface Science, 473, 25-30. Lien externe
Louyot, M. (2019). Modal Analysis of a Spinning Disk in a Dense Fluid as a Model for High Head Hydraulic Turbines [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Madra, A., Causse, P., Trochu, F., Adrien, J., Maire, E., & Breitkopf, P. (2019). Stochastic characterization of textile reinforcements in composites based on X-ray microtomographic scans. Composite Structures, 224, 11 pages. Lien externe
Marcotte, B., & Bernier, M. (2019). Experimental validation of a TRC model for a double U-tube borehole with two independent circuits. Applied Thermal Engineering, 162, 1-34. Disponible
Marouane, H., & Shirazi-Adl, A. (2019). Sensitivity of medial-lateral load sharing to changes in adduction moments or angles in an asymptomatic knee joint model during gait. Gait & Posture, 70, 39-47. Lien externe
Marouane, H., Shirazi-Adl, A., & Sharifi, M. (2019). Computational Musculoskeletal Biomechanics of the Knee Joint. Dans Advances in Biomechanics and Tissue Regeneration (p. 181-199). Lien externe
Massicotte, R., Mbeh, D. A., Mafu, A. A., Toulouse, M., Jacobs, D., Yahia, L., & Pichette, G. (2019). Disinfection effect of sodium dichloroisocyanurate (NaDCC) on various surfaces in medical facilities using different techniques. Interdisciplinary Journal of Chemistry, 3, 5 pages. Lien externe
Mchichi, N. A., & Mayer, J. R. R. (2019). Optimal calibration strategy for a five-axis machine tool accuracy improvement using the D-optimal approach. International Journal of Advanced Manufacturing Technology, 103(1-4), 251-265. Lien externe
Memarianpour, M., Niknam, S. A., Turenne, S., & Balazinski, M. (décembre 2018). Initial Tool Wear Mechanism in Dry and Lubricated Turning of Inconel 718 [Communication écrite]. International Conference on Advances in Engineering Research and Application (ICERA 2018), Thai Nguyen, Vietnam. Lien externe
Membrouki, A., Zinneddine, A., & Vasseur, P. (2019). Effects of discrete controllers on the stabilization of natural convection induced by internal heat generation in a shallow cavity. Computational Thermal Sciences, 10(1), 387-400. Lien externe
Merabet, R., & Laurendeau, É. (janvier 2019). Parametric Study on the Velocity Sampling Techniques for the Actuator Line Method in 2D [Communication écrite]. AIAA Scitech Forum, San Diego, California. Lien externe
Mirabolghasemi, A., Akbarzadeh, A. H., Rodrigue, D., & Therriault, D. (2019). Thermal conductivity of architected cellular metamaterials. ACTA Materialia, 174, 61-80. Lien externe
Mohammadian, N., Turenne, S., & Brailovski, V. (2019). Electropolishing of laser powder bed-fused IN625 components in an ionic electrolyte. Journal of Manufacturing and Materials Processing, 3(4), 86 (20 pages). Disponible
Mohammed, I. (2019). Comparison of the Renishaw Ball Bar and Samba Method in 3-Axis and 5-Axis Machine Calibration, Including Reversal Error Estimation with the Tango Method [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Mohebbi, A., Achiche, S., & Baron, L. (2019). Integrated and concurrent detailed design of a mechatronic quadrotor system using a fuzzy-based particle swarm optimization. Engineering Applications of Artificial Intelligence, 82, 192-206. Lien externe
Mouazé, N., & Birglen, L. (mai 2019). Preliminary design of a revolute to prismatic morphing compliant join [Communication écrite]. CCToMM Mechanisms, Machines and Mechatronics Symposium (M3 2019), Montréal, Qc, Canada (11 pages). Non disponible
Mouazé, N., & Birglen, L. (mai 2019). Preliminary Design of a Revolute to Prismatic Morphing Compliant Joint [Conception préliminaire d’une articulation rotoide compliante changeant en une liaison prismatique]. [Communication écrite]. CCToMM Mechanisms, Machines and Mechatronics (M3) Symposium, Montréal, Canada (11 pages). Lien externe
Muller, E., Pelletier, D., & Garon, A. (2019). Interactions between adaptive time-integrators and adaptive meshing in a monolithic FEM solver. International Journal of Numerical Methods for Heat and Fluid Flow, 29(7), 2297-2323. Lien externe
Murray, P. (2019). Development of an Automated In-Line Resin Metering and Mixing System for Composites in the Automotive Industry [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Mustafy, T. (2019). The Short and Long Term Effects of in Vivo Cyclic Axial Compression Applied During Puberty on Bone Growth, Morphometry and Biomechanics [Thèse de doctorat, Polytechnique Montréal]. Disponible
Mustafy, T., Londono, I., & Villemure, I. (2019). Experimental and finite element analyses of bone strains in the growing rat tibia induced by in vivo axial compression. Journal of the Mechanical Behavior of Biomedical Materials, 94, 176-185. Lien externe
Mustafy, T., Londono, I., Moldovan, F., & Villemure, I. (2019). High impact exercise improves bone microstructure and strength in growing rats. Scientific Reports, 9(1), 13128. Disponible
Nasraoui, M. T., Chakhari, J., Khalfi, B., & Nasri, M. (2019). Modeling and analysis of a bolted joint under tension and shear loads. Transactions of the Canadian Society for Mechanical Engineering, 43(3), 376-386. Lien externe
Neale, A., Kummert, M., & Bernier, M. (septembre 2019). Linear discriminant analysis for classification of a large virtual smart meter data set with known building parameters [Communication écrite]. 16th International IBPSA Conference (Building Simulation 2019), Rome, Italy. Lien externe
Neymark, J., Kummert, M., & Judkoff, R. (septembre 2019). Developing equivalent surface heat transfer input parameters for updated standard 140/BESTEST thermal fabric test cases [Communication écrite]. 16th International Conference of the International Building Performance Simulation Association (Building Simulation 2019), Rome, Italy. Lien externe
Nguyen, M. T., Castonguay, P., & Laurendeau, É. (2019). GPU parallelization of multigrid RANS solver for three-dimensional aerodynamic simulations on multiblock grids. Journal of Supercomputing, 75(5), 2562-2583. Lien externe
Niknam, S. A., Saberi, M., Kouam, J., Hashemi, R., Songmene, V., & Balazinski, M. (2019). Ultrafine and fine particle emission in turning titanium metal matrix composite (Ti-MMC). Journal of Central South University, 26(6), 1563-1572. Lien externe
Nossovitch, A. (2019). A Mechanical and Economical Study on the Incorporation of Anti-Microbial Anodized Aluminum in Cooling Towers [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Nyamsi Hendji, N. (2019). Fascia thoraco-lombaire : vers une meilleure compréhension de la biomécanique de la colonne vertébrale et de la locomotion humaine [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Nyssen, F., & Batailly, A. (2019). Thermo-Mechanical Modeling of Abradable Coating Wear in Aircraft Engines. Journal of Engineering for Gas Turbines and Power, 141(2). Lien externe
Nyssen, F., Vadcard, T., Piollet, E., & Batailly, A. (juin 2019). Strongly coupled thermo-mechanical casing/abradable model for rotor/stator interactions [Communication écrite]. ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition (GT 2019), Phoenix, AZ, United states. Lien externe
Parmigiani, A., Di Palma, P. R., Leclaire, S., Habib, F., & Kong, X.-Z. (2019). Characterization of transport-enhanced phase separation in porous media using a Lattice-Boltzmann method. Geofluids, 2019, 1-13. Disponible
Pérez, J., Trépanier, J.-Y., Reggio, M., & Leclaire, S. (février 2019). Lattice Boltzmann Approach for the Modelling and Simulation of a Water Droplet Impact and Freezing [Affiche]. Simulation-Based Engineering Science Day, Montréal, Québec. Non disponible
Perreault, P., Robert, É., & Patience, G. S. (2019). Experimental methods in chemical engineering: Mass spectrometry-MS. Canadian Journal of Chemical Engineering, 97(5), 1036-1042. Lien externe
Pichon, H., Piollet, E., & Ross, A. (2019). An acoustic trade-off chart for the design of multilayer acoustic packages. Applied Acoustics, 148, 9-18. Lien externe
Pichon, H., Piollet, E., & Ross, A. (juillet 2019). Visualizing trade-offs to improve multilayer acoustic package design [Communication écrite]. 26th International Congress on Sound and Vibration (ICSV 2019), Montréal, Qc, Canada. Non disponible
Pierre, J., Farahani, R. D., & Therriault, D. (2019). Objective 3: Additive manufacturing of acoustic sandwich panels using the materials developed in O1. (Rapport technique). Non disponible
Piollet, E., Fotsing, E.-R., Ross, A., & Michon, G. (2019). High damping and nonlinear vibration of sandwich beams with entangled cross-linked fibres as core material. Composites Part B: Engineering, 168, 353-366. Lien externe
Piollet, E., Nyssen, F., & Batailly, A. (2019). Blade/casing rubbing interactions in aircraft engines: Numerical benchmark and design guidelines based on NASA rotor 37. Journal of Sound and Vibration, 460, 30 pages. Lien externe
Plante, F., Dandois, J., & Laurendeau, É. (janvier 2019). Similitude between 3D cellular patterns in transonic buffet and subsonic stall [Communication écrite]. AIAA Scitech Forum, San Diego, California. Lien externe
Plastre, L. (2019). Prédiction de l'érosion de cavitation par une méthode multi-échelle [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Plastre, L., Devals, C., Gauthier, M., Nennemann, B., Trépanier, J.-Y., & Guibault, F. (octobre 2019). Cavitation erosion prediction based on a multi-scale method [Communication écrite]. 8th IAHR International Workshop on Cavitation and Dynamic Problems in Hydraulic Machinery and Systems (IAHR 2019), Stuttgart, Germany (7 pages). Lien externe
Prakash, A. (2019). RANS Computation of Heat Transfer Over Rough Surfaces [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Prakash, A., & Laurendeau, É. (juin 2019). A wall function approach to account for rough surface heat transfer in Spalart-Allmaras turbulence model [Communication écrite]. AIAA Aviation 2019 Forum, Reston, VA (23 pages). Lien externe
Raison, M. (mars 2019). Brings together more than two hundred public and private surgeons from Francophone countries [Présentation]. Dans Congrès annuel de la Société Française d'Orthopédie Pédiatrique (SOFOP 2019), Brussels, Belgium. Non disponible
Raison, M. (mai 2019). Conception et fabrication additive en robotique d'assistance - Design and additive manufacturing in robotics assistance [Présentation]. Dans Forum Franco-Québecois - Innovation en santé (FFQIS), Paris, France. Non disponible
Raison, M. (octobre 2019). Robotics, assistive technologies, intelligent materials, and 3D prototyping for rehabilitation [Présentation]. Dans Congrès annuel de l'Association des physiciens et ingénieurs biomédicaux du Québec 2019 (APIBQ), Mont Saint-Anne, Canada. Non disponible
Raison, M., Gaudet, G., Blanchet, L., Lecours, S., Clark, E., & Achiche, S. (octobre 2019). Review: pediatric assistance robotics [Communication écrite]. 34e Congrès de la Société Française de Médecine Physique et de Réadaptation (SOFMER 2019), Bordeaux, France. Non disponible
Rajesh, P. S. M., Delaroa, C., Gagne, M., Sapieha, J.-E., Sirois, F., & Therriault, D. (2019). Continuous and selective-area coating of silver on fiber-reinforced polymer composites for aerospace applications. Materials Today Communications, 18, 206-212. Lien externe
Rastegar Talzali, S. (2019). Biomechanical Modeling of Transforaminal Lumbar Interbody Fusion: A Comparative Assessment of Segmental Lumbar Lordosis and Risk of Cage Subsidence With Different Cage Heights and Placements [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Robitaille, B. (2019). Analyse des propriétés mécaniques de joints à recouvrement en aluminium 2024-T3 AlClad soudés par friction-malaxage et impact de la préparation de surface [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Rohart, V., Dubé, M., & Laberge Lebel, L. (août 2019). Improvement of the lap shear strength of resistance-welded thermoplastic composite joints using a silane sol-gel coating on the stainless-steel heating element [Présentation]. Dans 22nd International Conference on Composite Materials (ICCM 2019), Melbourne, Australia. Lien externe
Rohart, V., Dubé, M., & Laberge Lebel, L. (2019). Lap shear strength effects of temperature on the apparent lap shear strength of resistance-welded carbon fibre/thermoplastic composite joints. SAMPE Journal, 55(3), 30-37. Non disponible
Saidi, H. (2019). Modélisation de pompes à chaleur à multiple compresseurs [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Sarcher, A., Brochard, S., Perrouin-Verbe, B., Raison, M., Letellier, G., Leboeuf, F., & Gross, R. (2019). Detection of pronator muscle overactivity in children with unilateral spastic cerebral palsy: development of a semi-automatic method using EMG data. Annals of Physical and Rehabilitation Medicine, 62(6), 409-417. Lien externe
Sarcher, A., Brochard, S., Perrouin‐Verbe, B., Raison, M., Letellier, G., Leboeuf, F., & Gross, R. (mai 2019). Surface EMG is essential for distinguishing overactive pronator(s) during active supination in children with unilateral spastic cerebral palsy [Résumé]. 31st Annual Meeting of the European Academy of Childhood Disability (EACD), Paris, France. Publié dans Developmental Medicine & Child Neurology, 61(S2). Lien externe
Sarcher, A., Gross, R., Perrouin‐Verbe, B., Raison, M., Letellier, G., & Brochard, S. (mai 2019). Implementation of a clinical upper limb movement analysis for children with elbow movements' disorders [Résumé]. 31st Annual Meeting of the European Academy of Childhood Disability (EACD), Paris, France. Publié dans Developmental Medicine & Child Neurology, 61(S2). Lien externe
Sarwark, J. F., Castelein, R. M., Maqsood, A., & Aubin, C.-É. (2019). The biomechanics of induction in adolescent idiopathic scoliosis: Theoretical factors. Journal of Bone and Joint Surgery-American Volume, 101(6), e22 (6 pages). Lien externe
Sharifi, M., Shirazi-Adl, A., & Marouane, H. (2019). Sensitivity of the knee joint response, muscle forces and stability to variations in gait kinematics-kinetics. Journal of Biomechanics, 99, 10 pages. Lien externe
Siguerdidjane, W., Khameneifar, F., Gosselin, F., & Levasseur, G. (mars 2019). A deep learning approach to solving the peen forming inverse problem [Résumé]. APS March Meeting 2019, Boston, Massachusetts. Publié dans Bulletin of the American Physical Society, 64(2). Lien externe
Simard, V. (2019). Intégration de structures absorbantes acoustiques innovantes au sein d'une turbosoufflante [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Simon, G. (2019). Étude d'un critère de décollement lagrangien sur des écoulements instationnaires complexes [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Spitler, J., & Bernier, M. (2019). Ground-source heat pump systems: state-of-the-art. Science and Technology for the Built Environment, 25(8), 945-946. Lien externe
Sterba, M., Aubin, C.-É., Wagnac, E., Fradet, L., & Arnoux, P.-J. (2019). Effect of impact velocity and ligament mechanical properties on lumbar spine injuries in posterior-anterior impact loading conditions: a finite element study. Medical and Biological Engineering and Computing, 57(6), 1381-1392. Lien externe
Strugala, G., Kummert, M., & Kegel, M. (septembre 2019). Experimental testing and modelling of a variable capacity air-to-air heat pump in cooling mode [Communication écrite]. 16th International Conference of the International Building Performance Simulation Association (Building Simulation 2019), Rome, Italy. Lien externe
Tabiai, I., Texier, D., Bocher, P., Therriault, D., & Lévesque, M. (2019). In-situ Full Field Out of Plane Displacement and Strain Measurements at the Micro-Scale in Single Reinforcement Composites under Transverse Load. Experimental Mechanics, 60(3), 359-377. Lien externe
Tabiai, I., Tkachev, G., Diehl, P., Frey, S., Ertl, T., Therriault, D., & Lévesque, M. (2019). Hybrid image processing approach for autonomous crack area detection and tracking using local digital image correlation results applied to single-fiber interfacial debonding. Engineering Fracture Mechanics, 216, 17 pages. Lien externe
Therriault, D., & Farahani, R. D. (août 2019). From the microfabrication of microvascular networks to the additive manufacturing of multifunctional composites [Présentation]. Dans 22nd International Conference on Composite Materials (ICCM22), Melbourne, Australia. Non disponible
Tucny, J.-M., Vidal, D., Leclaire, S., & Bertrand, F. (février 2019). A new Lattice-Boltzmann method for the simulation of rarefied gas flows in complex porous media [Affiche]. Simulation-Based Engineering Science Day, Montréal, Québec. Non disponible
Velasco Acosta, A. P., Mascle, C., & Baptiste, P. (2019). Applicability of Demand-Driven MRP in a complex manufacturing environment. International Journal of Production Research, 58(14), 4233-4245. Lien externe
Vo, M., Mehrabian, S., Étienne, S., Pelletier, D., & Cameron, C. B. (2019). The hemichordate pharynx and gill pores impose functional constraints at small and large body sizes. Biological Journal of the Linnean Society, 127(1), 75-87. Lien externe
Wang, X., Aubin, C.-É., Armstrong, R., & Rawlinson, J. (octobre 2019). Biomechanical effects of additional rods in spinal instrumentation with pedicle subtraction osteotomy [Communication écrite]. 49e Réunion annuelle de la Société de scoliose du Québec, Québec City, Québec, Canada. Non disponible
Wang, X., Aubin, C.-É., Ritzman, T., McBride, L., Rawlinson, J., & Diaz, C. (2019). Differential Rod Contouring Simulation. (Rapport technique). Non disponible
Wang, X., Yeung, K., Cheung, J. P. Y., Lau, J. Y.-N., Qi, W., Cheung, K. M.-C., & Aubin, C.-É. (juillet 2019). A Novel Superelastic Shape-Memory Rod Provides More Options for Optimal AIS Correction: Biomechanical Analysis of A Clinical Trial with 5-Year Follow-Up [Communication écrite]. 26th International Meeting on Advanced Spine Techniques (IMAST 2019), Amsterdam, The Netherlands. Non disponible
Wei, H., Cauchy, X., Navas, I. O., Abderrafai, Y., Chizari, K., Sundararaj, U., Liu, Y., Leng, J., & Therriault, D. (2019). Direct 3D Printing of Hybrid Nanofiber-Based Nanocomposites for Highly Conductive and Shape Memory Applications. ACS Applied Materials and Interfaces, 11(27), 24523-24532. Lien externe
Wu, Y. (2019). Investigating the Durability of Stellitte Hardfacing Components Used in the Power Generation Industry [Thèse de doctorat, Polytechnique Montréal]. Disponible
Wu, Y., Bousser, É., Schmitt, T., Tarfa, N., Khelfaoui, F., Rene, R., Sapieha, J.-E., & Brochu, M. (2019). Thermal stability of a Stellite/steel hardfacing interface during long-term aging. Materials Characterization, 154, 181-192. Lien externe
Xing, K. (2019). Volumetric Error-Based Condition and Health Monitoring System for Machine-Tools [Thèse de doctorat, Polytechnique Montréal]. Disponible
Xing, K., Achiche, S., & Mayer, J. R. R. (décembre 2018). The Effects of Machine Tool Pallet Change on Machine Tool Geometric Measurement Using the Scale and Master Ball Artefact Method (SAMBA) [Communication écrite]. International Conference on Advances in Engineering Research and Application (ICERA 2018), Thai Nguyen, Vietnam. Lien externe
Xing, K., Achiche, S., & Mayer, J. R. R. (2019). Five-axis machine tools accuracy condition monitoring based on volumetric errors and vector similarity measures. International Journal of Machine Tools & Manufacture, 138, 80-93. Lien externe
Xing, K., Mayer, J. R. R., & Achiche, S. (juin 2019). Application of EWMA control chart on volumetric errors change recognition [Communication écrite]. Joint CSME-CFDSC International Congress, London, ON. Lien externe
Xing, K., Rimpault, X., Mayer, J. R. R., Chatelain, J.-F., & Achiche, S. (2019). Five-axis machine tool fault monitoring using volumetric errors fractal analysis. CIRP Annals, 168(1), 555-558. Lien externe
Xu, C., Quinn, B., Laberge Lebel, L., Therriault, D., & L'Espérance, G. (2019). Multi-Material Direct Ink Writing (DIW) for Complex 3D Metallic Structures with Removable Supports. ACS Applied Materials and Interfaces, 11(8), 8499-8506. Lien externe
Xu, C., Therriault, D., Laberge Lebel, L., L'Espérance, G., & Bouchemit, A. (2019). 3D printing of metallic inks and subsequent heat-treatments. (Demande de brevet no US20190054536). Lien externe
Younsi, R. (mars 2019). Using experimental investigation for educational purposes: Characterization of a centrifugal fan [Communication écrite]. 13th International Technology, Education and Development Conference (INTED 2019), Valencia, Spain. Lien externe
Zoghlami, S., Béguin, C., Étienne, S., Teyssedou, A., Scott, D., & Bornard, L. (septembre 2019). Small bubble cloud configuration effect on added mass for euler-euler modeling [Communication écrite]. 38th IAHR World Congress, Panama City, Panama. Lien externe