 | Monter d'un niveau |
Abdali, H., & Ajji, A. (2017). Preparation of electrospun nanocomposite nanofibers of polyaniline/poly(methyl methacrylate) with amino-functionalized graphene. Polymers, 9(9). Disponible
Addi, C., Murschel, F., & De Crescenzo, G. (2017). Design and use of chimeric proteins containing a collagen-binding domain for wound healing and bone regeneration. Tissue Engineering Part B: Reviews, 23(2), 163-182. Lien externe
Addi, C., Murschel, F., Liberelle, B., Riahi, N., & De Crescenzo, G. (2017). A highly versatile adaptor protein for the tethering of growth factors to gelatin-based biomaterials. Acta Biomaterialia, 50, 198-206. Lien externe
Adrar, S., Habi, A., Ajji, A., & Grohens, Y. (2017). Combined effect of epoxy functionalized graphene and organomontmorillonites on the morphology, rheological and thermal properties of poly (butylenes adipate-co-terephtalate) with or without a compatibilizer. Applied Clay Science, 146, 306-315. Lien externe
Afzalabadi, A., Poorfar, A. K., Bidabadi, M., Moghadasi, H., Hochgreb, S., Rahbari, A., & Dubois, C. (2017). Study on hybrid combustion of aero-suspensions of boron-aluminum powders in a quiescent reaction medium. Journal of Loss Prevention in the Process Industries, 49(B), 645-651. Lien externe
Ajao, O., Le Hir, M., Rahni, M., Chadjaa, H., & Marinova, M. (2017). Comparative biocatalytic degradation of Kraft prehydrolysate phenolic fermentation inhibitors using bacteria-derived laccase. Wood Science and Technology, 51(3), 585-599. Lien externe
Ajao, O., Rahni, M., Marinova, M., Chadjaa, H., & Savadogo, O. (2017). Study of separation and fouling of reverse osmosis membranes during model hydrolysate solution filtration. Membranes, 7(4). Disponible
Ajersch, F., & Ilinca, F. (2017). Review of modeling and simulation of galvanizing operations. Steel Research International, 89(1), 12 pages. Lien externe
Allard-Massicotte, R., Chadjaa, H., & Marinova, M. (2017). Phenols removal from hemicelluloses pre-hydrolysate by laccase to improve butanol production. Fermentation, 3(3). Disponible
Ardila, N., Daigle, F., Heuzey, M.-C., & Ajji, A. (2017). Antibacterial activity of neat chitosan powder and flakes. Molecules, 22(1), 1-19. Disponible
Ardila, N., Daigle, F., Heuzey, M.-C., & Ajji, A. (2017). Effect of Chitosan Physical Form on Its Antibacterial Activity Against Pathogenic Bacteria. Journal of Food Science, 82(3), 679-686. Lien externe
Arias, A., Sojoudiasli, H., Heuzey, M.-C., Huneault, M. A., & Wood-Adams, P. (2017). Rheological study of crystallization behavior of polylactide and its flax fiber composites. Journal of Polymer Research, 24(3), 10 pages. Lien externe
Arkoun, M., Daigle, F., Heuzey, M.-C., & Ajji, A. (2017). Antibacterial electrospun chitosan-based nanofibers: A bacterial membrane perforator. Food Science & Nutrition, 5(4), 865-874. Disponible
Arkoun, M., Daigle, F., Heuzey, M.-C., & Ajji, A. (2017). Mechanism of action of electrospun chitosan-based nanofibers against meat spoilage and pathogenic bacteria. Molecules, 22(4). Disponible
Bautista-Del-Ángel, J., Morales-Cepeda, A. B., Lozano-Ramírez, T., Sanchez, S., Karami, S., & Lafleur, P. (2017). Mechanical and crystal enhancements to polylactide with silver-nanoparticle filler. Plastics Research online, 3 pages. Lien externe
Bell, A. D., Hurtig, M. B., Quenneville, E., Rivard, G. E., & Hoemann, C. D. (2017). Effect of a Rapidly Degrading Presolidified 10 kDa Chitosan/Blood Implant and Subchondral Marrow Stimulation Surgical Approach on Cartilage Resurfacing in a Sheep Model. CARTILAGE, 8(4), 417-431. Lien externe
Blais, B., & Bertrand, F. (2017). CFD-DEM investigation of viscous solid–liquid mixing: Impact of particle properties and mixer characteristics. Chemical Engineering Research and Design, 118, 270-285. Disponible
Blais, B., Bertrand, O., Fradette, L., & Bertrand, F. (2017). CFD-DEM simulations of early turbulent solid–liquid mixing: Prediction of suspension curve and just-suspended speed. Chemical Engineering Research and Design, 123, 388-406. Disponible
Boespflug, G., Maire, M., De Crescenzo, G., Lerouge, S., & Wertheimer, M. R. (2017). Characterization and comparison of N-, O-, and N+O-functionalized polymer surfaces for efficient (HUVEC) endothelial cell colonization. Plasma Processes and Polymers, 14(7), 11 pages. Lien externe
Boffito, D. C., Galli, F., Pirola, C., & Patience, G. S. (2017). CaO and isopropanol transesterify and crack triglycerides to isopropyl esters and green diesel. Energy Conversion and Management, 139, 71-78. Lien externe
Bonhivers, J. C., Alva-Argaez, A., Srinivasan, B., & Stuart, P. R. (2017). New analysis method to reduce the industrial energy requirements by heat-exchanger network retrofit: Part 2-Stepwise and graphical approach. Applied Thermal Engineering, 119, 670-686. Lien externe
Bonhivers, J.-C., Srinivasan, B., & Stuart, P. R. (2017). New analysis method to reduce the industrial energy requirements by heat-exchanger network retrofit: Part 1 - Concepts. Applied Thermal Engineering, 119, 659-669. Lien externe
Boubée de Gramont, F., Shiming, Z., Tomasello, G., Kumar, P., Sarkissian, A., & Cicoira, F. (2017). Highly stretchable electrospun conducting polymer nanofibers. Applied Physics Letters, 111(9), 5 pages. Lien externe
Boudreault, Y., Carré, C., Farand, P., Forest, L., Lafleur, P., & Ross, A. (2017). Différentes méthodes d'apprentissage actif pour une diversité d'apprenants. Proceedings of the Canadian Engineering Education Association (CEEA), 5 pages. Disponible
Boulay, A.-M., Bare, J., Benini, L., Berger, M., Lathuillière, M. J., Manzardo, A., Margni, M., Motoshita, M., Núñez, M., Pastor, A. V., Ridoutt, B., Oki, T., Worbe, S., & Pfister, S. (2017). The WULCA consensus characterization model for water scarcity footprints: assessing impacts of water consumption based on available water remaining (AWARE). International Journal of Life Cycle Assessment, 23(2), 368-378. Disponible
Bruel, C., Laraque, R., Omanovic, S., Coulombe, S., & Patience, G. S. (2017). Pt thin film transient mobility over yttria stabilized zirconia. Thin Solid Films, 626, 17-24. Lien externe
Camacho, P. H., Morales-Cepeda, A. B., Salas-Papayanopolos, H., Bautista, J. E., Castro, C., Lozano, T., Sanchez-Valdes, S., & Lafleur, P. (2017). Crystallization behavior of polypropylene/silver nanocomposites using polyethylene glycol as reducing agent and interface modifier. Journal of Thermoplastic Composite Materials, 30(5), 662-677. Lien externe
Cao, V., Margni, M., Favis, B. D., & Deschênes, L. (2017). Choice of land reference situation in life cycle impact assessment. International Journal of Life Cycle Assessment, 22(8), 1220-1231. Lien externe
Chimeni, D. Y., Dubois, C., & Rodigue, D. (2017). Surface-initiated catalytic polymerization of hemp fibers. Plastics Research online, 3 pages. Lien externe
Clift, R., Sim, S., King, H., Chenoweth, J., Christie, I., Clavreul, J., Mueller, C., Posthuma, L., Boulay, A.-M., Chaplin-Kramer, R., Chatterton, J., DeClerck, F., Druckman, A., France, C., Franco, A., Gerten, D., Goedkoop, M., Hauschild, M., Huijbregts, M., ... Murphy, R. (2017). The challenges of applying planetary boundaries as a basis for strategic decision-making in companies with global supply chains. Sustainability, 9(2). Disponible
Dandres, T., Farrahi Moghaddam, R., Nguyen, K. K., Lemieux, Y., Samson, R., & Cheriet, M. (2017). Consideration of marginal electricity in real-time minimization of distributed data centre emissions. Journal of Cleaner Production, 143, 116-124. Disponible
Dandres, T., Vandromme, N., Obrekht, G., Wong, A., Nguyen, K. K., Lemieux, Y., Cheriet, M., & Samson, R. (2017). Consequences of future data center deployment in Canada on electricity generation and environmental impacts: a 2015-2030 prospective study. Journal of Industrial Ecology, 21(5), 1312-1322. Disponible
Dorion-Thibaudeau, J., Durocher, Y., & De Crescenzo, G. (2017). Quantification and simultaneous evaluation of the bioactivity of antibody produced in CHO cell culture-The use of the ectodomain of Fc gamma RI and surface plasmon resonance-based biosensor. Molecular Immunology, 82, 46-49. Lien externe
Douïeb, S., Archambault, S., Fradette, L., Bertrand, F., & Haut, B. (2017). Effect of the fluid shear rate on the induction time of CO₂-THF hydrate formation. Canadian Journal of Chemical Engineering, 95(1), 187-198. Lien externe
Dupuis, M., April, A., Lesage, P., & Forgues, D. (2017). Method to enable LCA analysis through each level of development of a BIM model. Procedia Engineering, 196, 857-863. Disponible
Edake, M., Dalil, M., Darabi Mahboub, M. J., Dubois, J.-L., & Patience, G. S. (2017). Catalytic glycerol hydrogenolysis to 1,3-propanediol in a gas–solid fluidized bed. RSC Advances, 7(7), 3853-3860. Disponible
Ellingsen, L. A.-W., Hung, C. R., Majeau-Bettez, G., Singh, B., Chen, Z., Whittingham, M. S., & Strømman, A. H. (2017). Erratum: Corrigendum: Nanotechnology for environmentally sustainable electromobility. Nature Nanotechnology, 12(1), 90-90. Lien externe
Esen, O., Pavelka, M., & Grmela, M. (2017). Hamiltonian coupling of electromagnetic field and matter. International Journal of Advances in Engineering Sciences and Applied Mathematics, 9(1), 3-20. Lien externe
Farand, P., & Tavares, J. R. (2017). A concept inventory for knowledge base evaluation and continuous curriculum improvement. Education for Chemical Engineers, 21, 33-39. Disponible
Farhanian, D., De Crescenzo, G., & Tavares, J. R. (2017). Kinetics, Chemistry, and Morphology of Syngas Photoinitiated Chemical Vapor Deposition. Langmuir, 33(8), 1780-1791. Disponible
Fong, D., Duceppe, N., & Hoemann, C. D. (2017). Mesenchymal stem cell detachment with trace trypsin is superior to EDTA for in vitro chemotaxis and adhesion assays. Biochemical and Biophysical Research Communications, 484(3), 656-661. Lien externe
Fong, D., Gregoire-Gelinas, P., Cheng, A. P., Mezheritsky, T., Lavertu, M., Sato, S., & Hoemann, C. D. (2017). Lysosomal rupture induced by structurally distinct chitosans either promotes a type 1 IFN response or activates the inflammasome in macrophages. Biomaterials, 129, 127-138. Disponible
Galli, F., Previtali, D., Casagrande, S., Pirola, C., Manenti, F., & Boffito, D. C. (2017). Simulation of the water-acetic acid separation via distillation using different entrainers: An economic comparison. Chemical Engineering Transactions, 57, 1159-1164. Lien externe
Gheribi, A. E., & Chartrand, P. (2017). Thermal Conductivity of Compounds Present in the Side Ledge in Aluminium Electrolysis Cells. JOM, 69(11), 2412-2417. Lien externe
Gheribi, A. E., Poncsák, S., Guérard, S., Bilodeau, J.-F., Kiss, L., & Chartrand, P. (2017). Thermal conductivity of the sideledge in aluminium electrolysis cells: Experiments and numerical modelling. Journal of Chemical Physics, 146(11), 10 pages. Lien externe
Gheribi, A. E., Poncsák, S., Kiss, L., Guérard, S., Bilodeau, J.-F., & Chartrand, P. (2017). Experimental determination of the thermal diffusivity of α-cryolite up to 810 K and comparison with first principles predictions. ACS Omega, 2(5), 2224-2230. Lien externe
Goffaux, G., Hammami, I., & Jolicoeur, M. (2017). A dynamic metabolic flux analysis of myeloid-derived suppressor cells confirms immunosuppression-related metabolic plasticity. Scientific Reports, 7(1), 9850. Disponible
Grmela, M., Hong, L., Jou, D., Lebon, G., & Pavelka, M. (2017). Hamiltonian and Godunov structures of the Grad hierarchy. Physical Review E - Statistical, Nonlinear, and Soft Matter Physics, 95(3), 19 pages. Lien externe
Guntzburger, Y., Pauchant, T. C., & Tanguy, P. A. (2017). Ethical Risk Management Education in Engineering: A Systematic Review. Science and Engineering Ethics, 23(2), 323-350. Lien externe
Haddad, M., Bazinet, L., Savadogo, O., & Paris, J. (2017). Electrochemical acidification of Kraft black liquor: Impacts of pulsed electric field application on bipolar membrane colloidal fouling and process intensification. Journal of Membrane Science, 524, 482-492. Lien externe
Haddad, M., Bazinet, L., Savadogo, O., & Paris, J. (2017). A feasibility study of a novel electro-membrane based process to acidify Kraft black liquor and extract lignin. Process Safety and Environmental Protection, 106, 68-75. Lien externe
Haddad, M., Mikhaylin, S., Bazinet, L., Savadogo, O., & Paris, J. (2017). Electrochemical acidification of Kraft black liquor by electrodialysis with bipolar membrane: Ion exchange membrane fouling identification and mechanisms. Journal of Colloid and Interface Science, 488, 39-47. Lien externe
Haddad, M., Mikhaylin, S., Bazinet, L., Savadogo, O., & Paris, J. (2017). Electrochemical Acidification of Kraft Black Liquor: Effect of Fouling and Chemical Cleaning on Ion Exchange Membrane Integrity. ACS Sustainable Chemistry and Engineering, 5(1), 168-178. Lien externe
Hernandez, Y., Lozano, T., Morales, A. B., Navarro-Pardo, F., Lafleur, P., Sanchez-Valdes, S., Martinez-Colunga, G., Morales-Zamudio, L., & de Lira-Gomez, P. (2017). Improvement of toughness properties of polypropylene filled with nanobentonite using stearic acid as interface modifier. Journal of Composite Materials, 51(3), 373-380. Lien externe
Heshmati, V., & Favis, B. D. (2017). High performance poly (lactic acid)/bio-polyamide11 through controlled chain mobility. Polymer, 123, 184-193. Lien externe
Heshmati, V., Zolali, A. M., & Favis, B. D. (2017). Morphology development in poly (lactic acid)/polyamide11 biobased blends: chain mobility and interfacial interactions. Polymer, 120, 197-208. Lien externe
Hidayat, T., Shishin, D., Decterov, S., & Jak, E. (2017). Critical assessment and thermodynamic modeling of the Cu-Fe-O-Si system. Calphad, 58, 101-114. Lien externe
Hidayat, T., Shishin, D., Decterov, S., & Jak, E. (2017). Critical thermodynamic re-evaluation and re-optimization of the CaOFeOFe2O3SiO2system. CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry, 56, 58-71. Lien externe
Hidayat, T., Shishin, D., Decterov, S., & Jak, E. (2017). Experimental Study and Thermodynamic Re-optimization of the FeO-Fe₂O₃-SiO₂ System. Journal of Phase Equilibria and Diffusion, 38(4), 477-492. Lien externe
Hoemann, C. D., Marchand, C., Rivard, G.-E., El-Gabalawy, H., & Poubelle, P. E. (2017). Effect of chitosan and coagulation factors on the wound repair phenotype of bioengineered blood clots. International Journal of Biological Macromolecules, 104(B), 1916-1924. Lien externe
Hosseininasab, S., Faucheux, N., Soucy, G., & Tavares, J. R. (2017). Full range of wettability through surface modification of single-wall carbon nanotubes by photo-initiated chemical vapour deposition. Chemical Engineering Journal, 325, 101-113. Disponible
Jahan, N., Mighri, F., Rodrigue, D., & Ajji, A. (2017). Enhanced electroactive β phase in three phase PVDF/CaCO₃/nanoclay composites: Effect of micro-CaCO₃ and uniaxial stretching. Journal of Applied Polymer Science, 134(24), 11 pages. Lien externe
Jalliffier-Verne, I., Leconte, R., Huaringa-Alvarez, U., Heniche, M., Madoux-Humery, A.-S., Autixier, L., Galarneau, M., Servais, P., Prévost, M., & Dorner, S. (2017). Modelling the impacts of global change on concentrations of Escherichia coli in an urban river. Advances in Water Resources, 108, 450-460. Lien externe
Jauzein, T., Huneault, M. A., & Heuzey, M.-C. (2017). Crystallinity and mechanical properties of polylactide/ether-amide copolymer blends. Journal of Applied Polymer Science, 134(14), 10 pages. Lien externe
Jegat, C., Virgilio, N., & Favis, B. D. (2017). Self-assembly of oil microdroplets at the interface in co-continuous polymer blends. European Polymer Journal, 93, 259-271. Lien externe
Jung, I.-H., Zhu, Z., Kim, J., Wang, J., Chartrand, P., & Pelton, A. (2017). Recent Progress on the Factsage Thermodynamic Database for New Mg Alloy Development. JOM, 69(6), 1052-1059. Lien externe
Karami, S., & Lafleur, P. (2017). Effect of strain-induced molecular ordering on mechanical performance and barrier properties of polylactide nanocomposites. Journal of Polymer Science, Part B: Polymer Physics, 55(24), 1865-1876. Lien externe
Karengera, E., Durocher, Y., De Crescenzo, G., & Henry, O. (2017). Combining metabolic and process engineering strategies to improve recombinant glycoprotein production and quality. Applied Microbiology and Biotechnology, 101(21), 7837-7851. Lien externe
Karengera, E., Robotham, A., Kelly, J., Durocher, Y., De Crescenzo, G., & Henry, O. (2017). Altering the central carbon metabolism of HEK293 cells: Impact on recombinant glycoprotein quality. Journal of Biotechnology, 242, 73-82. Lien externe
Kasprzak, W., Li, D., Patience, G. S., Sauriol, P., Amaris, H. V., Dollé, M., Gauthier, M., Rousselot, S., Talebi-Esfandarani, M., Bibienne, T., Sun, X., Liu, Y., & Liang, G. (2017). Using induction melting to make lithium-ion battery material. Advanced Materials & Processes, 175(8), 16-22. Lien externe
Khan, H., Swati, I. K., Younas, M., & Ullah, A. (2017). Chelated nitrogen-sulphur-codoped TiO₂: synthesis, characterization, mechanistic, and UV/visible photocatalytic studies. International Journal of Photoenergy, 2017, 1-17. Disponible
Krahn, N., Spearman, M., Meier, M., Dorion-Thibaudeau, J., McDougall, M., Patel, T. R., De Crescenzo, G., Durocher, Y., Stetefeld, J., & Butler, M. (2017). Inhibition of glycosylation on a camelid antibody uniquely affects its FcgammaRI binding activity. European Journal of Pharmaceutical Sciences, 96, 428-439. Lien externe
Lauzon, M.-A., Drevelle, O., & Faucheux, N. (2017). Peptides derived from the knuckle epitope of BMP-9 induce the cholinergic differentiation and inactivate GSk3beta in human SH-SY5Y neuroblastoma cells. Scientific Reports, 7(1), 4695 (14 pages). Disponible
Lavoie, J., Petre, C.-F., Paradis, P.-Y., & Dubois, C. (2017). Burning Rates and Thermal Behavior of Bistetrazole Containing Gun Propellants. Propellants, Explosives, Pyrotechnics, 42(2), 149-157. Lien externe
Lebon, G., Jou, D., & Grmela, M. (2017). Extended Reversible and Irreversible Thermodynamics: A Hamiltonian Approach with Application to Heat Waves. Journal of Non-Equilibrium Thermodynamics, 42(2), 153-168. Lien externe
Leclaire, S., Parmigiani, A., Malaspinas, O., Chopard, B., & Latt, J. (2017). Generalized three-dimensional lattice Boltzmann color-gradient method for immiscible two-phase pore-scale imbibition and drainage in porous media. Physical Review E - Statistical, Nonlinear, and Soft Matter Physics, 95(3), 31 pages. Lien externe
Lenfant, G., Heuzey, M.-C., van de Ven, T. G. M., & Carreau, P. (2017). A comparative study of ECNC and CNC suspensions: effect of salt on rheological properties. Rheologica Acta, 56(1), 51-62. Lien externe
Lenfant, G., Heuzey, M.-C., van de Ven, T. G. M., & Carreau, P. (2017). Gelation of crystalline nanocellulose in the presence of hydroxyethyl cellulose. Canadian Journal of Chemical Engineering, 95(10), 1891-1900. Lien externe
Levasseur, A., Bahn, O., Beloin-Saint-Pierre, D., Marinova, M., & Vaillancourt, K. (2017). Assessing butanol from integrated forest biorefinery: A combined techno-economic and life cycle approach. Applied Energy, 198, 440-452. Lien externe
Li, H., Ndjamo, A., Sauriol, P., & Patience, G. S. (2017). Optimization of LiFePO₄ wet media milling and regressive population balance modeling. Advanced Powder Technology, 28(3), 1000-1007. Lien externe
Li, X., Ghavidel Mehr, N., Guzman-Morales, J., Favis, B. D., De Crescenzo, G., Yakandawala, N., & Hoemann, C. D. (2017). Cationic osteogenic peptide P15-CSP coatings promote 3-D osteogenesis in poly(epsilon-caprolactone) scaffolds of distinct pore size. Journal of Biomedical Materials Research Part A, 105(8), 2171-2181. Lien externe
Ma, P. L., Lavertu, M., Winnik, F. M., & Buschmann, M. D. (2017). Stability and binding affinity of DNA/chitosan complexes by polyanion competition. Carbohydrate Polymers, 176, 167-176. Lien externe
Mazar, A., Jemaa, N., Wafa Al Dajani, W., Marinova, M., & Perrier, M. (2017). Furfural production from a pre-hydrolysate generated using aspen and maple chips. Biomass and Bioenergy, 104, 8-16. Lien externe
Milovanoff, A., Dandres, T., Gaudreault, C., Cheriet, M., & Samson, R. (2017). Real-time environmental assessment of electricity use: a tool for sustainable demand-side management programs. International Journal of Life Cycle Assessment, 23(10), 1981-1994. Lien externe
Moayeri, A., & Ajji, A. (2017). High capacitance carbon nanofibers from poly(acrylonitrile) and poly(vinylpyrrolidone)-functionalized graphene by electrospinning. Journal of Nanoscience and Nanotechnology, 17(3), 1820-1829. Lien externe
Mohebbi, A., Mighri, F., Ajji, A., & Rodrigue, D. (2017). Effect of Processing Conditions on the Cellular Morphology of Polypropylene Foamed Films for Piezoelectric Applications. Cellular Polymers, 36(1), 13-34. Lien externe
Mohebbi, A., Mighri, F., Ajji, A., & Rodrigue, D. (2017). Polymer ferroelectret based on polypropylene foam: piezoelectric properties improvement using post-processing thermomechanical treatment. Journal of Applied Polymer Science, 134(10). Lien externe
Mohebbi, A., Mighri, F., Ajji, A., & Rodrigue, D. (2017). Polymer ferroelectret based on polypropylene foam: piezoelectric properties prediction using dynamic mechanical analysis. Polymers for Advanced Technologies, 28(4), 476-483. Lien externe
Murschel, F., Fortier, C., Jolicoeur, M., Hodges, R. S., & De Crescenzo, G. (2017). Two Complementary Approaches for the Controlled Release of Biomolecules Immobilized via Coiled-Coil Interactions: Peptide Core Mutations and Multivalent Presentation. Biomacromolecules, 18(3), 965-975. Lien externe
Najarzadeh, Z., & Ajji, A. (2017). Role of molecular architecture in interfacial self-adhesion of polyethylene films. Journal of Plastic Film & Sheeting, 33(3), 235-261. Lien externe
Nasri Lari, H., Chaouki, J., & Tavares, J. R. (2017). De-agglomeration of nanoparticles in a jet impactor-assisted fluidized bed. Powder Technology, 316, 455-461. Disponible
Nasri Lari, H., Farhanian, D., Boffito, D. C., Patience, G. S., De Crescenzo, G., Chaouki, J., & Tavares, J. R. (2017). Shedding light on iron pentacarbonyl photochemistry through a CVD case study. Catalysis Communications, 100, 19-23. Disponible
Nofar, M., Tabatabaei, A., Sojoudiasli, H., Park, C. B., Carreau, P., Heuzey, M.-C., & Kamal, M. R. (2017). Mechanical and bead foaming behavior of PLA-PBAT and PLA-PBSA blends with different morphologies. European Polymer Journal, 90, 231-244. Lien externe
Parmigiani, A., Degruyter, W., Leclaire, S., Huber, C., & Bachmann, O. (2017). The mechanics of shallow magma reservoir outgassing. Geochemistry, Geophysics, Geosystems, 18(8), 2887-2905. Lien externe
Patience, G. S., Boffito, D. C., & Patience, P. A. (2017). How do you write and present research well? Answers to the 20 questions. Canadian Journal of Chemical Engineering, 95(1), 11-20. Lien externe
Patience, G. S., Patience, C. A., Blais, B., & Bertrand, F. (2017). Citation analysis of scientific categories. Heliyon, 3(5). Disponible
Pelton, A., Eriksson, G., & Bale, C. W. (2017). Scheil-Gulliver Constituent Diagrams. Metallurgical and Materials Transactions A, 48(6), 3113-3129. Lien externe
Pelton, A., Eriksson, G., Hack, K., & Bale, C. W. (2017). Thermodynamic calculation of aqueous phase diagrams. Monatshefte für Chemie, 149(2), 395-409. Lien externe
Peres, S., Jolicoeur, M., Moulin, C., Dague, P., & Schuster, S. (2017). How important is thermodynamics for identifying elementary flux modes? PLOS One, 12(2), 1-20. Disponible
Pfister, S., Boulay, A.-M., Berger, M., Hadjikakou, M., Motoshita, M., Hess, T., Ridoutt, B., Weinzettel, J., Scherer, L., Döll, P., Manzardo, A., Núñez, M., Verones, F., Humbert, S., Buxmann, K., Harding, K., Benini, L., Oki, T., Finkbeiner, M., & Henderson, A. (2017). Understanding the LCA and ISO water footprint: A response to Hoekstra (2016) “A critique on the water-scarcity weighted water footprint in LCA”. Ecological Indicators, 72, 352-359. Lien externe
Picard, F., & Chaouki, J. (2017). NaClO/NaOH soil oxidation for the remediation of two real heavy-metal and petroleum contaminated soils. Journal of Environmental Chemical Engineering, 5(3), 2691-2698. Lien externe
Pickenhahn, V., Grange, M., De Crescenzo, G., Lavertu, M., & Buschmann, M. D. (2017). Regioselective chitosan end-group activation: the triskelion approach. RSC Advances, 7(30), 18628-18638. Disponible
Pontes Lima, R. J., Dubois, C., Stowe, R., & Ringuette, S. (2017). Enhanced reactivity of aluminum powders by capping with a modified glycidyl azide polymer. International Journal of Energetic Materials and Chemical Propulsion, 15(6), 481-500. Lien externe
Pupin, C., Ross, A., Dubois, C., Rietsch, J.-C., & Ruiz, E. (2017). Predicting porosity formation in phenolic resins for RTM manufacturing: The porosity map. Composites Part A: Applied Science and Manufacturing, 100, 294-304. Lien externe
Pupin, C., Ross, A., Dubois, C., Rietsch, J.-C., Vernet, N., & Ruiz, E. (2017). Formation and suppression of volatile-induced porosities in an RTM epoxy resin. Composites Part A: Applied Science and Manufacturing, 94, 146-157. Lien externe
Recio-Garrido, D., Adekunle, A., Perrier, M., Raghavan, V., & Tartakovsky, B. (2017). Wastewater treatment and online chemical oxygen demand estimation in a cascade of microbial fuel cells. Industrial and Engineering Chemistry Research, 56(44), 12471-12478. Lien externe
Ren, X., Zhao, X., Turcotte, F., Deschênes, J.-S., Tremblay, R., & Jolicoeur, M. (2017). Current lipid extraction methods are significantly enhanced adding a water treatment step in Chlorella protothecoides. Microbial Cell Factories, 16(1), 1-13. Disponible
Riahi, N., Liberelle, B., Henry, O., & De Crescenzo, G. (2017). Impact of RGD amount in dextran-based hydrogels for cell delivery. Carbohydrate Polymers, 161, 219-227. Lien externe
Riahi, N., Murschel, F., Lerouge, S., Durocher, Y., Henry, O., & De Crescenzo, G. (2017). Bioavailability of immobilized epidermal growth factor: Covalent versus noncovalent grafting. Biointerphases, 12(1), 010501 (8 pages). Lien externe
Safdari, F., Carreau, P., Heuzey, M.-C., & Kamal, M. R. (2017). Effects of poly(ethylene glycol) on the morphology and properties of biocomposites based on polylactide and cellulose nanofibers. Cellulose, 24(7), 2877-2893. Lien externe
Safdari, F., Carreau, P., Heuzey, M.-C., Kamal, M. R., & Sain, M. M. (2017). Enhanced properties of poly(ethylene oxide)/cellulose nanofiber biocomposites. Cellulose, 24(2), 755-767. Lien externe
Salas-Papayanopolos, H., Morales-Cepeda, A., Sanchez, S., Lafleur, P., & Gomez, I. (2017). Synergistic effect of silver nanoparticle content on the optical and thermo-mechanical properties of poly(L-lactic acid)/glycerol triacetate blends. Polymer Bulletin, 74(12), 4799-4814. Lien externe
Shabanian, J., & Chaouki, J. (2017). Effects of temperature, pressure, and interparticle forces on the hydrodynamics of a gas-solid fluidized bed. Chemical Engineering Journal, 313, 580-590. Lien externe
Shabanian, J., & Chaouki, J. (2017). Similarities between gas-solid fluidization in the presence of interparticle forces at high temperature and induced by a polymer coating approach. Powder Technology, 320, 155-160. Lien externe
Shabanian, J., Sauriol, P., & Chaouki, J. (2017). A simple and robust approach for early detection of defluidization. Chemical Engineering Journal, 313, 144-156. Lien externe
Sheikhi, A., Yang, H., Carreau, P., & van de Ven, T. G. M. (2017). Colloidal nano-toolbox for molecularly regulated polymerization: chemorheology over 6 decades of viscoelasticity. Materials Horizons, 4(6), 1165-1170. Lien externe
Shukla, A., Decterov, S., & Pelton, A. (2017). Thermodynamic evaluation and optimization of the SrO-MgO, SrO-SiO₂ and SrO-MgO-SiO₂ systems. Journal of Phase Equilibria and Diffusion, 38(5), 615-629. Lien externe
Sim, S., Chevrier, A., Garon, M., Quenneville, E., Lavigne, P., Yaroshinsky, A., Hoemann, C. D., & Buschmann, M. D. (2017). Electromechanical probe and automated indentation maps are sensitive techniques in assessing early degenerated human articular cartilage. Journal of Orthopaedic Research, 35(4), 858-867. Lien externe
Sim, S., Hadjab, I., Garon, M., Quenneville, E., Lavigne, P., & Buschmann, M. D. (2017). Development of an Electromechanical Grade to Assess Human Knee Articular Cartilage Quality. Annals of Biomedical Engineering, 45(10), 2410-2421. Lien externe
Sim, S., Hadjab, I., Garon, M., Quenneville, E., Lavigne, P., & Buschmann, M. D. (2017). Erratum to: Development of an Electromechanical Grade to Assess Human Knee Articular Cartilage Quality. Annals of Biomedical Engineering, 45(10), 2422-2422. Lien externe
Sojoudiasli, H., Heuzey, M.-C., Carreau, P., & Riedl, B. (2017). Rheological behavior of suspensions of modified and unmodified cellulose nanocrystals in dimethyl sulfoxide. Rheologica Acta, 56(7-8), 673-682. Lien externe
Tabasi, R. Y., & Ajji, A. (2017). Tailoring heat-seal properties of biodegradable polymers through melt blending. International Polymer Processing, 32(5), 606-613. Lien externe
Tavakoli Naeini, A., Soliman, O. Y., Alameh, M. G., Lavertu, M., & Buschmann, M. D. (2017). Automated in-line mixing system for large scale production of chitosan-based polyplexes. Journal of Colloid and Interface Science, 500, 253-263. Lien externe
Teguia, C. D., Albers, R., & Stuart, P. R. (2017). Analysis of economically viable lignin-based biorefinery strategies implemented within a kraft pulp mill. Tappi Journal, 16(3), 157-169. Lien externe
Teguia, C. D., D'Amours, S., Albers, R., & Stuart, P. R. (2017). Decision-making process for the identification of preferred lignin-based biorefinery strategies. Tappi Journal, 16(4), 229-240. Lien externe
Tighzert, W., Habi, A., Ajji, A., Sadoun, T., & Daoud, F. B.-O. (2017). Fabrication and characterization of nanofibers based on poly(lactic acid)/chitosan blends by electrospinning and their functionalization with phospholipase A1. Fibers and Polymers, 18(3), 514-524. Lien externe
Tromson, C., Bulle, C., & Deschênes, L. (2017). Including the spatial variability of metal speciation in the effect factor in life cycle impact assessment: Limits of the equilibrium partitioning method. Science of The Total Environment, 581-582, 117-125. Lien externe
Valitova, I., Natile, M. M., Soavi, F., Santato, C., & Cicoira, F. (2017). Tin Dioxide Electrolyte-Gated Transistors Working in Depletion and Enhancement Modes. ACS Applied Materials & Interfaces, 9(42), 37013-37021. Lien externe
Ván, P., Pavelka, M., & Grmela, M. (2017). Extra mass flux in fluid mechanics. Journal of Non-Equilibrium Thermodynamics, 42(2), 133-151. Lien externe
Venereo-Sanchez, A., Simoneau, M., Lanthier, S., Chahal, P., Bourget, L., Ansorge, S., Gilbert, R., Henry, O., & Kamen, A. (2017). Process intensification for high yield production of influenza H1N1 Gag virus-like particles using an inducible HEK-293 stable cell line. Vaccine, 35(33), 4220-4228. Lien externe
Verones, F., Bare, J., Bulle, C., Frischknecht, R., Hauschild, M., Hellweg, S., Henderson, A., Jolliet, O., Laurent, A., Liao, X., Lindner, J. P., Maia de Souza, D., Michelsen, O., Patouillard, L., Pfister, S., Posthuma, L., Prado, V., Ridoutt, B., Rosenbaum, R. K., ... Fantke, P. (2017). LCIA framework and cross-cutting issues guidance within the UNEP-SETAC Life Cycle Initiative. Journal of Cleaner Production, 161, 957-967. Lien externe
Wan, B., & Fradette, L. (2017). Phase Inversion of a Solid-Stabilized Emulsion: Effect of Particle Concentration. Canadian Journal of Chemical Engineering, 95(10), 1925-1933. Lien externe
Wang, C.-S., Virgilio, N., Wood-Adams, P., & Heuzey, M.-C. (2017). A mechanism for the synergistic gelation properties of gelatin B and xanthan gum aqueous mixtures. Carbohydrate Polymers, 175(Supplement), 484-492. Lien externe
Wang, J., Reyna-Valencia, A., & Favis, B. D. (2017). Continuity, morphology and surface resistivity in binary blends of poly(ether-block-amide) with polyethylene and polystyrene. European Polymer Journal, 91, 197-211. Lien externe
Wang, J., Reyna-Valencia, A., & Favis, B. D. (2017). Controlling the continuity and surface migration of conductive poly(ether-block-amide) in melt processed cast-film blends. Polymer, 136, 224-234. Lien externe
Wang, S., Ajji, A., Guo, S., & Xiong, C. (2017). Preparation of microporous polypropylene/titanium dioxide composite membranes with enhanced electrolyte uptake capability via melt extruding and stretching. Polymers, 9(3), 110. Disponible
Wu, Q., Maire, M., Lerouge, S., Therriault, D., & Heuzey, M.-C. (2017). 3D Printing of Microstructured and Stretchable Chitosan Hydrogel for Guided Cell Growth. Advanced Biosystems, 1(6), 1700058 (6 pages). Lien externe
Yi, Z., Bettini, L. G., Tomasello, G., Kumar, P., Piseri, P., Valitova, I., Milani, P., Soavi, F., & Cicoira, F. (2017). Flexible conducting polymer transistors with supercapacitor function. Journal of Polymer Science Part B: Polymer Physics, 55(1), 96-103. Lien externe
Yousefi, I., Pakravan, M., Rahimi, H., Bahador, A., Farshadzadeh, Z., & Haririan, I. (2017). An investigation of electrospun Henna leaves extract-loaded chitosan based nanofibrous mats for skin tissue engineering. Materials Science and Engineering C, 75, 433-444. Lien externe
Zhang, S., & Cicoira, F. (2017). Water-Enabled Healing of Conducting Polymer Films. Advanced Materials, 29(40), 6 pages. Lien externe
Zhang, S., Hubis, E., Tomasello, G., Soliveri, G., Kumar, P., & Cicoira, F. (2017). Patterning of Stretchable Organic Electrochemical Transistors. Chemistry of Materials, 29(7), 3126-3132. Lien externe
Zhao, X., Kasbi, M., Chen, J., Peres, S., & Jolicoeur, M. (2017). A dynamic metabolic flux analysis of ABE (acetone-butanol-ethanol) fermentation by Clostridium acetobutylicum ATCC 824, with riboflavin as a by-product. Biotechnology and Bioengineering, 114(12), 2907-2919. Lien externe
Zhu, L., Garon, M., Quenneville, E., Buschmann, M. D., & Savard, P. (2017). Electrical potentials measured on the surface of the knee reflect the changes of the contact force in the knee joint produced by postural sway. Gait & Posture, 52, 159-164. Lien externe
Zolali, A. M., & Favis, B. D. (2017). Compatibilization and toughening of co-continuous ternary blends via partially wet droplets at the interface. Polymer, 114, 277-288. Lien externe
Zolali, A. M., & Favis, B. D. (2017). Partial to complete wetting transitions in immiscible ternary blends with PLA: the influence of interfacial confinement. Soft Matter, 13(15), 2844-2856. Lien externe
Zolali, A. M., Heshmati, V., & Favis, B. D. (2017). Ultratough co-continuous PLA/PA11 by interfacially percolated poly(ether-b-amide). Macromolecules, 50(1), 264-274. Lien externe
Bashiri, H., Bertrand, F., & Chaouki, J. (2017). Reply to comments on Investigation of turbulent flows in stirred tanks using a non-intrusive particle tracking technique [Commentaire ou lettre]. Chemical Engineering Science, 158, 623-623. Lien externe
Aparecido Lopes Silva, D., & Patouillard, L. (juin 2017). Hotspots analysis comparing IMPACT World+ with other LCIA methods: a case study in Brazil [Communication écrite]. 7o Conferencia Internacional de Análisis de Ciclo de Vida en Latinoamérica (CILCA 2017), Medellín, Colombia (6 pages). Non disponible
Belot, D., Vidal, R. E., Van Setten, B., Votsmeier, M., & Bertrand, F. (octobre 2017). Numerical investigation of the impact of washcoat deposition on the performance of particulate filters [Communication écrite]. 10th world Congress on Chemical Engineering, Barcelona, Spain. Lien externe
Belot, D., Vidal, R. E., Van Setten, B., Votsmeier, M., & Bertrand, F. (septembre 2017). Numerical investigation of the impact of washcoat depostition on the performance of particulate filters [Communication écrite]. International Symposium on Modeling of Exhaust-Gas After Treatment (MODEGAT 2017), Karlsruhe, Germany. Non disponible
Belot, D., Vidal, R. E., Van Setten, B., Votsmeier, M., & Bertrand, F. (juin 2017). Numerical investigation of the impact of washcoat depostition on the performance of particulate filters [Communication écrite]. 25th Annual CFDSC Conference, Windsor, ON, Canada. Non disponible
Bjørn, A., Majeau-Bettez, G., Wood, R., Margni, M., & Bulle, C. (juillet 2017). Absolute sustainability assessment of product life cycles through downscaling of planetary boundary to industry level [Communication écrite]. 9th biennial conference of the International Society for Industrial Ecology (ISIE), Chicago, Ill.. Non disponible
Bourg, V., Tsou, A., & Ajji, A. (mai 2017). Orientation of poly(ethylene terephthalate) in incompatible blends with an elastomer: Influence of functionalization [Communication écrite]. 75th Annual Technical Conference and Exhibition of the Society of Plastics Engineers (SPE ANTEC 2017), Anaheim, CA. Non disponible
Cloutier, J.-N., Savadogo, O., Paris, J., Perrier, M., Labrecque, R., Kandev, N., & Champagne, P. (octobre 2017). Effect of the basic electrochemical cell operating parameters on the performance of the electrolysis of Kraft pulping black liquor [Communication écrite]. 232nd ECS Fall Meeting, National Harbor, MD. Publié dans Electrochemical Society Transactions, 80(10). Lien externe
Colomba, A., Latifi, M., Li, D., Berruti, F., & Briens, C. (mai 2017). Production of Activated Carbons from Biomass Waste for Environmental Applications [Communication écrite]. Waste-to-Resources Conferences, Hannover, Germany. Non disponible
Gheribi, A. E., & Lee, J. J. (juillet 2017). Calculation of thermo-chemical equilibrium using phase diagram methods [Communication écrite]. 26th International Colloquium on the Dynamics of Explosions and Reactive Systems (ICDERS 2017), Boston, MA. Lien externe
Hidayat, T., Shishin, D., Decterov, S., Hayes, P. C., & Jak, E. (novembre 2016). High-temperature experimental and thermodynamic modelling research on the pyrometallurgical processing of copper [Communication écrite]. 1st International Process Metallurgy Conference (IPMC 2016), West Java, Indonesia (9 pages). Lien externe
Jean, S., Levasseur, A., & Stuart, P. R. (février 2017). Economic and Environmental Assessment of Integrated Fast Pyrolysis Processes [Communication écrite]. 102nd PaperWeek- BioFor Conference, Montréal, Qc, Canada. Lien externe
Jolliet, O., Fantke, T., McKone, T. E., Anton, A., Michelsen, O., Stylianou, K. S., Boulay, A.-M., & Frischknecht, R. (octobre 2017). Global guidance on LCIA indicators : impacts of particulate matter and of land use [Communication écrite]. 17th LCA Conference, Portsmouth, USA. Lien externe
Kasparek, E., Tavares, J. R., Wertheimer, M. R., & Girard-Lauriault, P.-L. (juillet 2017). Wavelength-dependent deposition of photo-polymerized acetylene films [Communication écrite]. International Plasma Chemistry Society annual Conference, Montréal, Québec. Lien externe
Kauppinen, S., Karhula, S. S., Thevenot, J., Ylitalo, T., Rieppo, L., Kestilä, I., Hadjab, I., Finnilä, M. A., Quenneville, E., Garon, M., Gahunia, H. K., Pritzker, K. P., Buschmann, M. D., Nieminen, H. J., & Saarakkala, S. (avril 2017). Volumetric analysis of tidemark and vessel perforations through calcified cartilage from micro-computed tomography: Associations with osteoarthritis stage [Communication écrite]. World Congress of the Osteoarthritis-Research-Society-International (OARSI) on Osteoarthritis, Las Vegas, NV. Publié dans Osteoarthritis and Cartilage, 25. Lien externe
Kestilä, I., Thevenot, J. P., Finnilä, M. A., Karhula, S. S., Hadjab, I., Kauppinen, S., Garon, M., Quenneville, E., Rieppo, L., Pritzker, K. P., Buschmann, M. D., Nieminen, H. J., & Saarakkala, S. (avril 2017). Automatic 3D selection, segmentation, and analysis of human articular cartilage chondrons from micro-computed tomography in vitro [Communication écrite]. World Congress of the Osteoarthritis-Research-Society-International (OARSI) on Osteoarthritis, Las Vegas, NV (1 page). Publié dans Osteoarthritis and Cartilage, 25. Lien externe
Latifi, M., Berruti, F., & Briens, C. (mai 2016). Jiggle bed reactor for testing catalytic activity of olivine in bio-oil gasification [Communication écrite]. 15th International Conference on Fluidization, Montebello, Québec. Publié dans Powder Technology, 316. Lien externe
Leclerc, P., Doucet, J., & Chaouki, J. (mars 2017). Production of renewable styrene using catalytic microwave depolymerization [Communication écrite]. AiChE Spring Meeting, San Antonio, TX. Non disponible
Majeau-Bettez, G., Agez, M., Wood, R., Strømman, A. H., & Samson, R. (juin 2017). Streamlined hybridization software: merging Ecoinvent and Exiobase [Communication écrite]. 9th biennial conference of the International Society for Industrial Ecology (ISIE), Chicago. Non disponible
Majeau-Bettez, G., Cherubini, F., Strømman, A. H., & Samson, R. (mai 2017). Respecting material and energy balance in attributional LCA: reducing the influence of allocation [Communication écrite]. 11th Society and Materials International Conference (SAM 11), Trondheim, Norway. Non disponible
Nofar, M., Tabatabaei, A., Park, C. B., Carreau, P., Heuzey, M.-C., & Kamal, M. R. (mai 2017). Wide-range of microcellular bead foams from different PLA-based drop/sea blend morphologies [Communication écrite]. 75th Annual Technical Conference and Exhibition of the Society of Plastics Engineers (SPE ANTEC 2017), Anaheim, CA. Lien externe
Riekstin, A. C., Hedjamt, R., Dandres, T., & Cheriet, M. (août 2017). Statistical-based method to determine the best hour of the day regarding GHG emissions for a smart home appliance [Communication écrite]. IEEE SmartWorld, Ubiquitous Intelligence & Computing, Advanced & Trusted Computed, Scalable Computing & Communications, Cloud & Big Data Computing, Internet of People and Smart City Innovation (SmartWorld/SCALCOM/UIC/ATC/CBDCom/IOP/SCI 2018), San Francisco, CA (8 pages). Lien externe
Rieppo, L., Karhula, S., Thevenot, J., Hadjab, I., Quenneville, E., Garon, M., Buschmann, M. D., Nieminen, H. J., & Saarakkala, S. (avril 2017). Determination of extracellular matrix orientation of articular cartilage in 3D using micro-computed tomography [Communication écrite]. World Congress of the Osteoarthritis-Research-Society-International (OARSI) on Osteoarthritis, Las Vegas, NV. Publié dans Osteoarthritis and Cartilage, 25. Lien externe
Saadatkhah, N., Rigamonti, M. G., Boffito, D. C., Li, H., & Patience, G. S. (mai 2016). Spray dried SiO₂ WO₃/TiO₂ and SiO₂ vanadium pyrophosphate core-shell catalysts [Communication écrite]. 15th International Conference on Fluidization, Montebello, Québec. Publié dans Powder Technology, 316. Lien externe
Samih, S., & Chaouki, J. (mai 2016). Catalytic ash free coal gasification in a fluidized bed thermogravimetric analyzer [Communication écrite]. 15th International Conference on Fluidization (Fluidization for Emerging Green Technologies), Montebello, Québec. Publié dans Powder Technology, 316. Lien externe
Samih, S., & Chaouki, J. (octobre 2017). Coal pyrolysis and gasification in a fluidized bed thermogravimetric analyzer [Communication écrite]. Symposium on Journey across Food and Chemical Engineering Dyad conjunction with the 67th Canadian Chemical Engineering Conference, Edmonton, Canada. Publié dans Canadian Journal of Chemical Engineering, 96(10). Lien externe
Savoji, H., Boespflug, G., Maire, M., Ajji, A., Lerouge, S., & Wertheimer, M. R. (juillet 2017). Plasma Processes for Innovative Vascular Prostheses Combining 3D Electrospun Nanofiber Matrices and Bioactive Coatings [Communication écrite]. 23rd International Symposium on Plasma Chemistry (ISPC 2017), Montréal, QC, Canada. Lien externe
Shabanian, J., & Chaouki, J. (mai 2017). Effects of temperature, pressure, and interparticle forces on gas-solid fluidization behavior [Communication écrite]. 12th International Conference on Fluidized Bed Technology (CFB 2017), Krakow, Poland. Non disponible
Shabanian, J., Sauriol, P., Mostoufi, N., & Chaouki, J. (mai 2016). Performance evaluation of different approaches for early detection of defluidization [Communication écrite]. 15th International Conference on Fluidization (Fluidization for Emerging Green Technologies), Montebello, Québec. Publié dans Powder Technology, 316. Lien externe
Shabanian, J., Sauriol, P., Rakib, A., & Chaouki, J. (avril 2017). Co-combustion of coal and ReEF in a bubbling fluidized bed combustor: defluidization prediction and prevention [Communication écrite]. 8th European Combustion Meeting (ECM 2017), Dubrovnik, Croatia. Non disponible
Shu, S., Demol, R., Bertrand, F., Tanguy, P. A., & Chaouki, J. (octobre 2017). Compartmental modelling of bubble column reactor based on computational fluid dynamics [Communication écrite]. Multiscale Structure and Functionalities for Future Formulation Conference (FORMULA 2017), Beijing, China. Non disponible
Stadler, K., Lonka, R., Bouman, E., Majeau-Bettez, G., & Strømman, A. H. (septembre 2017). The Industrial Ecology Digital Lab [Communication écrite]. EnviroInfo 2017, Luxembourg. Lien externe
Tucny, J.-M., Vidal, D., Drolet, F., & Bertrand, F. (juin 2017). Numerical study of the impact of multi-layering on the permeability and capture efficiency of fibrous air filters [Communication écrite]. 25th Annual CFDCS Conference, Windsor, ON, Canada. Non disponible
Walzberg, J., Dandres, T., Samson, R., Merveille, N., & Cheriet, M. (octobre 2017). An agent-based model to evaluate smart homes sustainability potential [Communication écrite]. 28th IEEE Annual International Symposium on Personal, Indoor, and Mobile Radio Communications (PIMRC 2017), Montréal, Québec (7 pages). Lien externe
Wu, Q., Heuzey, M.-C., & Therriault, D. (juillet 2017). 3D printing of chitosan-based nanocomposites for electronic applications [Communication écrite]. 54th Annual Technical Meeting of the Society of Engineering Science (SES 2017), Boston, United States. Non disponible
Aubé, M., Robelin, C., & Chartrand, P. (juin 2017). Thermodynamic evaluation and optimization of the NaF-KF-ZnF2 system [Affiche]. CALPHAD XLVI, Saint-Malo, France. Non disponible
Gancheva, T., & Virgilio, N. (juin 2017). Highly porous stimuli-sensitive hydrogels embedded with metal nanoparticles : towards micro-reactors with enhanced catalytic properties [Affiche]. CREPEC Annual Student Colloquium, Montréal, Québec. Non disponible
Cloutier, J.-N., Paris, J., Savadogo, O., Perrier, M., Labrecque, R., & Champagne, P. (octobre 2017). Investigation on the Performance of Electrolytic Processing of Kraft Pulping Black Liquor [Résumé]. 232nd ECS Meeting, National Harbor, MD. Publié dans ECS Meeting Abstracts, MA2017-02(22). Lien externe
Beaulieu, C., Vidal, D., Chaouki, J., & Bertrand, F. (octobre 2017). Transient Process of Radial and Axial Segregation Caused by Differences in Particle Size and Density in a Horizontal Drum [Présentation]. Dans 67th Canadian Chemical Engineering Conference (CSChE 2017), Edmonton, AB, Canada. Non disponible
Belot, I., Vidal, D., Hayes, R., Setten, B., Votsmeier, M., & Bertrand, F. (octobre 2017). Numerical Investigation of the Impact of Washcoat Deposition on the Performance of Particulate Filters [Présentation]. Dans 67th Canadian Chemical Engineering Conference (CSChE 2017), Edmonton, AB, Canada. Non disponible
Chambost, V., & Stuart, P. R. (octobre 2017). BioEnergy and BioEconomy: Markets, Strategy and GHG Emissions Reduction [Présentation]. Dans Brazilian BioEnergy Science and Technology Conference (BBEST 2017), Campus de Jordão, Brazil. Non disponible
Chartrand, P., Gheribi, A. E., Wang, K., Ouzilleau, P., & Robelin, C. (juin 2017). Thermodynamic and physical-property models for the production of primary aluminum [Présentation]. Dans CALPHAD XLVI, Saint-Malo, France. Non disponible
Gheribi, A. E., & Chartrand, P. (juin 2017). DFT/CALPHAD mixed method for the prediction of the thermal transport properties within aluminium electrolysis cells [Présentation]. Dans 46th International Conference on Computer Coupling of Phase Diagrams and Thermochemistry (CALPHAD 2017), Saint-Malo, France. Non disponible
Gheribi, A. E., Pelton, A., Chartrand, P., & Bale, C. W. (octobre 2017). Optimization of Compositions and Physical Properties of Salt Systems for Latent Heat Storage in Thermal Solar Energy Applications [Présentation]. Dans Materials Science & Technology 2017 (MS&T 2017), Pittsburgh, PA, USA. Non disponible
Latifi, M., & Chaouki, J. (janvier 2017). Induction Heating Fluidized Bed reactor for High-Temperature Gas-Solid reactions [Présentation]. Dans 10th World Congress of Chemical Engineering (WCCE10), Barcelona, Spain. Non disponible
Moussavi, A., & Stuart, P. R. (janvier 2017). Les bénéfices des analyses par pincement (Pinch) pour des applications industrielles et introduction aux analyses Bridge [Présentation]. Dans Technology Days GCM Consultants, Montréal, QC. Non disponible
Moussavi, A., Bonhivers, J. C., & Stuart, P. R. (octobre 2017). Bridge Method for Site-Wide Energy Analysis and its Application in the Pulp and Paper Industry [Présentation]. Dans 67th Canadian Society for Chemical Engineering (CSChE) Conference, Edmonton, AB, Canada. Non disponible
Ouzilleau, P., Gheribi, A. E., & Chartrand, P. (octobre 2017). A Thermodynamic Model for Carbonaceous Electrodes [Présentation]. Dans Materials Science & Technology 2017 (MS&T 2017), Pittsburgh, PA, USA. Non disponible
Ouzilleau, P., Gheribi, A. E., & Chartrand, P. (juillet 2017). Thermodynamic rationalization of graphitization: the critical temperature threshold [Présentation]. Dans The World's Carbon Conference (CARBON 2017), Melbourne, Australia. Non disponible
Stuart, P. R. (avril 2017). Process Integration and Novel Technologies and Systems: Biorefineries [Présentation]. Dans IEA Expert Meeting on The Role of PI for GHG Mitigation in Industry, Berlin, Germany. Lien externe
Stuart, P. R. (janvier 2017). Using Systems Analysis to Identify Sustainable BioEconomy Opportunities and Create Competitive Advantage [Présentation]. Dans UNICAMP, Campinas, Brazil. Non disponible
Stuart, P. R. (janvier 2017). Using Systems Analysis to Identify Sustainable BioEconomy Opportunities and Create Competitive Advantage for Forest Product Companies [Présentation]. Dans University of Minnesota, Minnesota, MN, USA. Non disponible
Tucny, J.-M., Vidal, D., & Bertrand, F. (octobre 2017). A New Lattice-Boltzmann Method for the Simulation of Rarefied Flows in Complex Porous Media [Présentation]. Dans 67th Canadian Chemical Engineering Conference (CSChE 2017), Edmonton, AB, Canada. Non disponible
Vidal, D., Belot, I., Hayes, R., Setten, B., Votsmeier, M., & Bertrand, F. (septembre 2017). Numerical Investigation of the Impact of Washcoat Deposition on the Performance of Particulate Filters [Présentation]. Dans 5th International Symposium on Modeling of Exhaust-Gas After-Treatment (MODEGAT V), Bad Herrenalb, Germany. Non disponible
Abdollahi Neisiani, M. (2017). Quantifyng Rare Earth Element Content in High Concentrated Samples by ko-NAA [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Aghaee Sarbarze, S. (2017). Gas-Phase Carbon Coating of LiFeP04 Nano Particles as a Cathode Building Block for Li-Ion Batteries [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Allard Massicotte, R. (2017). Valorisation de substrats complexes et peu coûteux pour la production d'acide lactique par voie biologique [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Bertrand, O. (2017). Développement de méthodes basées sur des mesures de pression pour la caractérisation de mélanges non-réactifs solide-liquide en cuve agitée [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Chen, J. (2017). Mechanical Pretreatment of Lignocellulosic Biomass to Increase the Yield of Enzymatic Hydrolysis [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Compaore, U. L. (2017). Analyse de flux de matière du cuivre au Québec pour le développement de stratégies de circularité [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Deschênes-Allard, F. (2017). Modélisation thermodynamique des équilibres de phases impliquant le cuivre dans le développement d'anodes inertes pour l'électrolyse de l'aluminium [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Elahipanah, N. (2017). Indirect Measurement of Inter-Particle Forces in a Gas-Solid Fluidized Bed at High Temperature with a Simple Approach [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Kasbi, M. (2017). Étude de l'ajout d'acétate de sodium dans une culture de clostridium acétobutylicum ATCC 824 face à la production de riboflavine et butanol en bioréacteur cuvée [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Louyot, P. (2017). Synthèse de catalyseur de Fischer-Tropsch assistée par ultrasons [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Mirarabrazi, M. (2017). Modeling the Phase Diagram and Density of Binary and Ternary Systems of Ionic Liquids [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Sok, A. (2017). Électrodéposition de couches minces de phosphure de zinc pour les applications solaires photovoltaïques [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Villazon, H. (2017). Synthèse par fusion de LiFePO4 dans un bain métallique [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Zakeri, B. (2017). Tailoring the Surface Charge of Cellulose Nanocrystals (CNC) Using a Polycation [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Zasieczny, F. (2017). Développement d'une méthodologie de sélection de produits chimiques dérivés des hémicelluloses issues du bois [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Ardila Gualdron, N. H. (2017). Production of Chitosan Micro and Nanospheres for the Formulation of Antibacterial Food Packaging Materials [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Arkoun, M. (2017). Élaboration de nouveaux biomatériaux antibactériens à base de chitosane par le procédé d'électrofilage [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Batsy, D. R. (2017). Impacts des politiques énergétiques sur la sélection des stratégies durables de bioraffinage forestier [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Diffo Téguia, C. (2017). Cadre méthodologique d'identification de stratégies préférentielles de bioraffinage forestier par une approche stage-and-gate [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Farhanian, D. (2017). Controlled Functionalization of Surfaces Through Syngas Photo-Initiated Chemical Vapor Depostion [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Hamzehlouia, S. (2017). Development of Microwave Heating-Assisted Catalytic Reaction Process: Application for Dry Reforming of Methane Optimization [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Heli, B. (2017). Bacterial Cellulose Supported Sensor for Bacteria and Gas Detection Development [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Heshmati, V. (2017). Biobased PLA/PA11 Blends and the Incorporation of Cellulose Nanocrystal [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Karengera, E. (2017). Amélioration de la production et de la qualité des protéines thérapeutiques recombinantes produites en culture en mode cuvée-alimentée de cellules de mammifère [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Lavoie, J. (2017). Performance, Stability and Erosivity of Nitrogen-Rich Gun Propellants [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Mazar, A. (2017). Valorisation du pré-hydrolysat provenant des usines de pâte dissoute kraft [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Mohammadi, S. R. (2017). Polyolefin/Clay Nanocomposite Peelable Sealants: Microstructure and Performance [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Ren, X. (2017). A Dynamic Metabolomic Study of Lipid Production in Chlorella Protothecoides [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Safdari Shadlou, F. (2017). Cellulose Nanofiber-Reinforced Polymer Biocomposites [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Sojoudiasli, H. (2017). Development of Biocomposites Based on Cellulosic Reinforcements [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Valitova, I. (2017). Electrolyte Gated Metal Oxide Transistors [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Venereo Sánchez, A. (2017). High-Yield Production Process of Influenza Virus-Like Particles in Human Cells Toward Large-Scale Vaccine Manufacturing [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Wang, C. (2017). Synergistic Gelation Properties of Gelatin and Polysaccharide Aqueous Mixtures [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Zhang, S. (2017). Processing and Patterning of Conducting Polymer Films for Flexible, Stretchable and Healable Electronics [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Zhao, X. (2017). Metabolomics and Dynamic Metabolic Flux Analysis in ABE (Acetone-Butanol-Ethanol) Fermentation [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Favis, B. D., & Le Corroller, P. (2017). Polymeric material and process for recycling plastic blends. (Brevet no US9670344). Lien externe
Merzouki, A., & Buschmann, M. D. (2017). Compositions and methods for efficacious and safe delivery of siRNA using specific chitosan-based nanocomplexes. (Brevet no US9809821). Lien externe
Patience, G. S., Edake, M., Neagoe, C., & Boffito, D. C. (2017). Process and system for producing a fatty acid alkyl ester. (Brevet no US9540590). Lien externe
Shahverdi-Shahraki, K., Ajji, A., Carreau, P., Ghosh, T., & Mahajan, K. (2017). PET nanocomposite materials and containers prepared therefrom. (Brevet no US9676926). Lien externe
Chevrier, A., Buschmann, M. D., Veilleux, D., Hoemann, C. D., & Lavertu, M. (2017). Freeze-dried polymer compositions for mixing with platelet rich plasma to form implants for tissue repair and/or compositions for therapeutic intra-articular injections. (Demande de brevet no US20170049696). Lien externe
Gauthier, M., Chartrand, P., Talebi-Esfandarani, M., Sauriol, P., Dollé, M., Dufour, J., & Liang, G. (2017). Processes for producing LiMXO₄ and products thereof. (Demande de brevet no US20170210624). Lien externe
Hoemann, C. D., Veilleux, D., & Buschmann, M. D. (2017). Lyophilized polymer scaffold compositions, processes for preparation and use in anabolic wound repair. (Demande de brevet no US20170056550). Lien externe
Hollender, M., Klöpper, B., & Chioua, M. (2017). Alarm handling system and method in plant process automation. (Demande de brevet no WO2017191253). Lien externe
Ouyang, W., Buschmann, M. D., Hoemann, C. D., Lavertu, M., & Chevrier, A. (2017). Novel formulation of physiological chitosan-inorganic salt solution/blood mixtures for tissue repair. (Demande de brevet no US20170333477). Lien externe
Bérard, A., Patience, G. S., Chouinard, G., & Tavares, J. R. (2017). Erratum: Photo Initiated Chemical Vapour Deposition To Increase Polymer Hydrophobicity. Scientific Reports, 7(1), 39422 (1 page). Disponible
Savoji, H., Maire, M., Lequoy, P., Liberelle, B., De Crescenzo, G., Ajji, A., Wertheimer, M. R., & Lerouge, S. (2017). Correction to “Combining Electrospun Fiber Mats and Bioactive Coatings for Vascular Graft Prostheses”. Biomacromolecules, 18(2), 647-647. Lien externe
Foroughi-Dahr, M., Mostoufi, N., Sotudeh-Gharebagh, R., & Chaouki, J. (2017). Particle coating in fluidized beds. Lien externe
Hoemann, C. D., & Fong, D. (2017). Immunological Responses to Chitosan for Biomedical Applications. Dans Jennings, J. A., & Bumgardner, J. D. (édit.), Chitosan Based Biomaterials Volume 1 : Fundamentals (p. 45-79). Lien externe
Mansoornejad, B., Sanaei, S., Gilani, B., Batsy, D. R., Benali, M., & Stuart, P. R. (2017). Designing integrated biorefineries using process systems engineering tools. Dans Biorefineries (Vol. 57, p. 201-226). Lien externe
Savadogo, O. (2017). Synergetic effects of surface active sites on the hydrogen evolution reaction. Dans Interfacial Electrochemistry: Theory: Experiment, and Applications (p. 915-935). Lien externe
