 | Monter d'un niveau |
Abbasi, S., Derdouri, A., & Carreau, P. (2014). Carbon nanotube conductive networks through the double percolation concept in polymer systems. International Polymer Processing, 29(1), 13-27. Lien externe
Abdali, H. (2014). Development of Antibacterial Structures and Films Using Ground Plants, Extracts/Essential Oils [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Abdali, H., & Ajji, A. (avril 2014). Antibacterial properties of electrospun fibers of PCL/clove bud powder [Communication écrite]. 72nd Annual Technical Conference of the Society of Plastics Engineers: The Plastics Conference (ANTEC 2014), Las Vegas, NV, United states. Lien externe
Aghabararnejad, M. (2014). Chemical Looping Gasification of Biomass [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Aghabararnejad, M., Patience, G. S., & Chaouki, J. (2014). TGA and kinetic modelling of Co, Mn and Cu oxides for chemical looping gasification (CLG). Canadian Journal of Chemical Engineering, 92(11), 1903-1910. Lien externe
Ajao, O. A. (2014). Development of Hemicelluloses Biorefineries for Integration Into Kraft Pulp Mills [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Ajao, O., Marinova, M., Savadogo, O., & Paris, J. (2014). Process for cost and energy efficient production of furfural from Kraft hardwood pre-hydrolysate. Journal of Bioprocess Engineering and Biorefinery, 3(4), 296-307. Lien externe
Ajji, A. (2014). Interphase and compatibilization by addition of a compatibilizer. Dans Utracki, L. A., & Wilkie, C. A. (édit.), Polymer Blends Handbook (2e éd., p. 447-516). Lien externe
Alameh, M.-G., Lavertu, M., Merzouki, A., Biniecki, K., & Buschmann, M. D. (mai 2014). Chitosan/siRNA nanoparticles demonstrate superior silencing efficiency and lower toxicity compared to lipid nanoparticles [Résumé]. 17th Annual Meeting of the American Society of Gene & Cell Therapy, Washington, DC. Publié dans Molecular Therapy, 22(S1). Disponible
Alizadeh, E., Bertrand, F., & Chaouki, J. (2014). Comparison of DEM results and lagrangian experimental data for the flow and mixing of granules in a rotating drum. AICHE Journal, 60(1), 60-75. Lien externe
Alizadeh, E., Bertrand, F., & Chaouki, J. (2014). Discrete element simulation of particle mixing and segregation in a tetrapodal blender. Computers and Chemical Engineering, 64, 1-12. Lien externe
Amin Esmaeili, K. S., Chaouki, J., & Guy, C. (août 2014). Experimental Characterization of a Gas-Liquid Bubble Column Reactor by Considering the Rheological Behavior of the Liquid Phase [Communication écrite]. 21st International Congress of Chemical and Process Engineering, Prague, Czech Republic. Non disponible
Amor, M. B., Gaudreault, C., Pineau, P.-O., & Samson, R. (2014). Implications of integrating electricity supply dynamics into life cycle assessment: A case study of renewable distributed generation. Renewable Energy, 69, 410-419. Lien externe
Arias Herrera, A. M. (2014). Development of Natural Fiber Reinforced Polylactide-Based Biocomposites [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Arzate, A. (août 2014). Inline determination of protein, fa and lactose contents in milk : a novel spectroscopic approach for monitoring and controlling the milk processing [Affiche]. 17th World Congress of Food Science and Technology, Montreal, Qc, Canada. Non disponible
Azar, F. E., & Perrier, M. (octobre 2014). Slope seeking control using multi-units [Communication écrite]. 2014 IEEE Conference on Control Applications, CCA 2014, Juan Les Antibes, France. Lien externe
Bai, D., Chaouki, J., Jafari, R., Rakib, A., Sauriol, P., & Shabanian, J. (mai 2014). Co-Combustion of ReEngineered Feedstock™ (ReEF) with Coal in Fluidized Bed Combustor [Communication écrite]. 11th International Conference on Fluidized Bed Technology (CFB 11), Beijing, China. Non disponible
Bale, C. W., Bélisle, E., Chartrand, P., Decterov, S., Eriksson, G., Gheribi, A. E., Hack, K., Jung, I.-H., Melançon, J., Pelton, A., Petersen, S., & Robelin, C. (février 2014). Recent developments in FactSage thermochemical software and databases [Communication écrite]. Celebrating the Megascale: Extraction and Processing Division Symposium on Pyrometallurgy in Honor of David G.C. Robertson - TMS 2014 143rd Annual Meeting and Exhibition, Orlando, Florida. Lien externe
Bashiri, H., Bertrand, F., & Chaouki, J. (juin 2014). Development of a Multi-Scale Model for the Design and Scale-Up of Gas/Liquid Stirred Tank Reactors [Communication écrite]. Mixing XXIV Conference, Lake George, NY, USA. Non disponible
Bashiri, H., Heniche, M., Bertrand, F., & Chaouki, J. (2014). Compartmental modelling of turbulent fluid flow for the scale-up of stirred tanks. Canadian Journal of Chemical Engineering, 92(6), 1070-1081. Lien externe
Becker, C. A., Agren, J., Baricco, M., Qing, C., Decterov, S., Kattner, U. R., Perepezko, J. H., Pottlacher, G. R., & Selleby, M. (2014). Thermodynamic modelling of liquids: CALPHAD approaches and contributions from statistical physics. Physica Status Solidi B - Basic Solid State Physics, 251(1), 33-52. Lien externe
Behrang, A., Grmela, M., Dubois, C., Lafleur, P., Lebon, G., & Turenne, S. (2014). Effective heat conduction in hybrid sphere & wire nanodispersions. Applied Physics Letters, 104(23), 233111-233111. Lien externe
Behrang, A., Grmela, M., Dubois, C., Turenne, S., Lafleur, P., & Lebon, G. (2014). Effective heat conduction in dispersion of wires. Applied Physics Letters, 104(6), 063106-063106. Lien externe
Belisle, E., Huang, Z., & Gheribi, A. E. (juillet 2014). Scalable gaussian process regression for prediction of material properties [Communication écrite]. 25th Australasian Database Conference (ADC 2014), Brisbane, QLD, Australia. Lien externe
Bell, A., Hurtig, M., Rivard, G. E., & Hoemann, C. D. (2014). Effect of Bone Marrow Surgical Approach and Rapidly Degrading Presolidified Subchondral Chitosan/Blood Implant on Resurfacing of Chondral Defects in a Sheep Model. Osteoarthritis and Cartilage, 22, S149-S149. Lien externe
Bertrand, F. (avril 2014). A mix of computational technologies for a better blend [Communication écrite]. D.B. Robinson Distinguished Speaker Series, University of Alberta, Edmonton, Alberta. Lien externe
Bhadane, P. A., Tsou, A. H., Cheng, J., Ellul, M. D., & Favis, B. D. (2014). Enhancement in interfacial reactive compatibilization by chain mobility. Polymer (United Kingdom), 55(16), 3905-3914. Lien externe
Binan, L., Ajji, A., De Crescenzo, G., & Jolicoeur, M. (2014). Approaches for Neural Tissue Regeneration. Stem Cell Reviews and Reports, 10(1), 44-59. Lien externe
Binan, L., Tendey, C., De Crescenzo, G., El Ayoubi, R., Ajji, A., & Jolicoeur, M. (2014). Differentiation of neuronal stem cells into motor neurons using electrospun poly-L-lactic acid/gelatin scaffold. Biomaterials, 35(2), 664-674. Lien externe
Blais, B., Lassaigne, M., Fradette, L., & Bertrand, F. (novembre 2014). Multiscale CFD-DEM Modeling of the Mixing of Viscous Liquids and Large Concentrations of Spherical Particles in Stirred Tanks [Communication écrite]. 14th AIChE Annual Meeting, Atlanta, USA. Lien externe
Blais, B., Lassaigne, M., Fradette, L., & Bertrand, F. (octobre 2014). Robust Modeling of Viscous Solid-Liquid Mixing in Stirred Tanks via a Euler-Lagrange Approach [Communication écrite]. 15th Workshop on Trends in Numerical and Physical Modeling for Industrial Multiphase Flows, Cargèse, Corsica, France. Non disponible
Boffito, D. C., Galli, F., Pirola, C., Bianchi, C. L., & Patience, G. S. (2014). Ultrasonic free fatty acids esterification in tobacco and canola oil. Ultrasonics Sonochemistry, 21(6), 1969-1975. Lien externe
Boffito, D. C., Neagoe, C., Edake, M., Pastor-Ramirez, B., & Patience, G. S. (2014). Biofuel synthesis in a capillary fluidized bed. Catalysis Today, 237, 13-17. Lien externe
Bonhivers, J. C., Svensson, E., Berntsson, T., & Stuart, P. R. (2014). Comparison between pinch analysis and bridge analysis to retrofit the heat exchanger network of a kraft pulp mill. Applied Thermal Engineering, 70(1), 369-379. Lien externe
Bonhivers, J.-C., Korbel, M., Sorin, M., Savulescu, L., & Stuart, P. R. (2014). Energy transfer diagram for improving integration of industrial systems. Applied Thermal Engineering, 63(1), 468-479. Lien externe
Bonhivers, J.-C., Svensson, E., Berntsson, T., & Stuart, P. R. (août 2014). Comparison Between the Grand Composite Curve, Advanced Composite Curves and Energy Transfer Diagram for Heat Exchanger Network Retrofit [Communication écrite]. 17th Conference Process Integration Modelling and Optimisation for Energy Saving and Pollution Reduction, Prague, Czech Republic. Non disponible
Bontems, P. O. (2014). Stratégie industrielle du bioraffinage de la lignine et méthode pour atténuer les risques dans le modèle d'affaires [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Bordes-Richard, E., Shekari, A., & Patience, G. S. (2014). Vanadium-phosphorus oxide catalyst for n-butane selective oxidation : from the catalyst synthesis to the industrial process. Dans Duprez, D., & Cavani, F. (édit.), Handbook of advanced methods and processes in oxidation catalysis : from laboratory to industry . Lien externe
Boulay, A.-M., Bare, J., Benini, L., Berger, M., Klemmayer, I., Lathuilliere, M., Loubet, P., Manzardo, A., Margni, M., Núñez, M., Ridoutt, B., Worbe, S., & Pfister, S. (octobre 2014). Building consensus on a generic water scarcity indicator for LCA-based water footprint: preliminary results from WULCA [Communication écrite]. 9th International Conference on Life Cycle Assessment in the Agri-Food Sector (LCA Food 2014), San Francisco, California. Non disponible
Bousfield, G. (2014). Effect of Chain Extension on Rheology and Tensile Properties of PHB and PHB-PLA Blends [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Boutrouka, R. (2014). Développement d'un film à base de polypropylène ayant des propriétés mécaniques et de scellage thermique améliorées [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Boutrouka, R., Tabatabaei, S. H., & Ajji, A. (avril 2014). Effect of molecular structure on the heat seal performance of polypropylene films [Communication écrite]. 72nd Annual Technical Conference of the Society of Plastics Engineers: The Plastics Conference (ANTEC 2014), Las Vegas, NV, United states. Lien externe
Cao, Z. M., Xie, W., Chartrand, P., Wei, S. H., Du, G. W., & Qiao, Z. Y. (2014). Thermodynamic assessment of the Bi-alkali metal (Li, Na, K, Rb) systems using the modified quasichemical model for the liquid phase. CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry, 46, 159-167. Lien externe
Cardona, M. (2014). Caractérisation des propriétés du bitume oxydé afin d'évaluer ses risques d'ignition [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Castanha, R. F., Mariano, A. P., Morais, L. A. S. , Scramin, S., & Monteiro, R. T. R. (2014). Optimization of lipids production by Cryptococcus laurentii 11 using cheese whey with molasses. Brazilian Journal of Microbiology, 45(2), 379-387. Disponible
Chambost, V., Mariano, A., Sanaei, S., Clerc, F., & Stuart, P. R. (octobre 2014). Survey of Biorefinery Decision-Making in the Canadian Forestry Sector [Communication écrite]. TAPPI International Bioenergy and Bioproducts Conference (IBBC), Tacoma, DC. Lien externe
Changoor, A., Brett, W., Hoba, M., Garon, M., Quenneville, E., Gordon, K., Savard, P., Buschmann, M. D., Hurtig, M. B., & Trout, D. R. (2014). Electroarthrography, a Non-Invasive Streaming Potential-Based Method, Measures Cartilage Quality in Live Horses. Osteoarthritis and Cartilage, 22, S88-S89. Lien externe
Chaouki, J. (2014). Innovate: Yes You Can. Procedia Engineering, 83, 16-18. Lien externe
Chaouki, J., & Bertrand, F. (mai 2014). Mixing Index and Restitution Coefficient: New Definitions and New Measurement Methods [Communication écrite]. 7th World Congress of Particle Technology (WCPT), Beijing, China. Non disponible
Charron-Latour, J. (2014). Facteurs clés d'une démarche d'amélioration continue durable dans les établissements de santé du Québec [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Chartrand, P., Gemme, F., & Robelin, C. (mai 2013). A thermodynamic model for the NH₄+, K+ // H₂PO₄-, H₂P₂O₇²-, NO₃-, Cl- - H₂O system [Communication écrite]. 2nd International Symposium on Innovation and Technology in the Phosphate Industry (SYMPHOS 2013), Agadir, Kingdom of Morocco. Publié dans Procedia Engineering, 83. Lien externe
Chartrand, P., Robelin, C., & Gemme, F. (juin 2014). A thermodynamic model for the NH4[+], K[+] // H2PO4[-], H2P2O7[2-], NO3[-], Cl[-] - H2O system for fertilizer applications [Présentation]. Dans CALPHAD XLIII, Changsha, China. Lien externe
Chegini, S. (2014). Removal of Potential Inhibitors from Hemicellulose Hydrolysate by Membrane Filtration [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Cheriet, M., Lemieux, Y., Nguyen, K. K., Farrahi Moghaddam, R., Khazri, S., Samson, R., Maurice, E., Dandres, T., & Vandromme, N. (août 2014). Life cycle assessment of videoconferencing with call management servers relying on virtualization [Communication écrite]. 2014 Conference ICT for Sustainability (ICT4S-14), Stockhom, Switzerland. Publié dans Advances in Computer Science Research (vol. 2), 2. Disponible
Clerc, F., Chambost, V., & Stuart, P. R. (octobre 2014). Lessons Learned: Designing the Forest Biorefinery Course [Communication écrite]. TAPPI International Bioenergy and Bioproducts Conference (IBBC), Tacoma, Washington. Lien externe
Colomba, A., Latifi, M., Li, D., Berruti, F., & Briens, C. (janvier 2014). Application of the jiggled bed reactor (JBR) to the development of effective pyrolysis and activation processes for the production of activated char from biomass [Communication écrite]. 4th Green Process Engineering Congress, Sevilla, Spain. Non disponible
Coppede, N., Valitova, I., Mahvash, F., Tarabella, G., Ranzieri, P., Iannotta, S., Santato, C., Martel, R., & Cicoira, F. (2014). Titanyl phthalocyanine ambipolar thin film transistors making use of carbon nanotube electrodes. Nanotechnology, 25(48). Lien externe
Dandres, T., Gaudreault, C., Seco, P. T., & Samson, R. (2014). Uncertainty management in a macro life cycle assessment of a 2005-2025 European bioenergy policy. Renewable and Sustainable Energy Reviews, 36, 52-61. Lien externe
Dansereau, L. P., El-Halwagi, M., & Stuart, P. R. (2014). Margins-based planning applied to newsprint manufacturing. Tappi Journal, 13(1), 21-29. Lien externe
Dansereau, L. P., El-Halwagi, M., Chambost, V., & Stuart, P. R. (2014). Methodology for biorefinery portfolio assessment using supply-chain fundamentals of bioproducts. Biofuels, Bioproducts and Biorefining, 8(5), 716-727. Lien externe
Dansereau, L. P., El-Halwagi, M., Mansoornejad, B., & Stuart, P. R. (2014). Framework for margins-based planning: Forest biorefinery case study. Computers and Chemical Engineering, 63, 34-50. Lien externe
Dassylva-Raymond, V., Kiss, L. I., Poncsak, S., Chartrand, P., Bilodeau, J.-F., & Guérard, S. (2014). Modeling the behavior of alumina agglomerate in the Hall-Héroult process. Dans Light Metals 2014 (p. 603-608). Lien externe
De Bruille, V. (2014). Impact de l'utilisation des ressources minérales et métalliques dans un contexte cycle de vie : une approche fonctionnelle [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Di Fronzo, A., Pirola, C., Comazzi, A., Galli, F., Bianchi, C. L., Di Michele, A., Vivani, R., Nocchetti, M., Bastianini, M., & Boffito, D. C. (2014). Co-based hydrotalcites as new catalysts for the Fischer-Tropsch synthesis process. Fuel, 119, 62-69. Lien externe
Dini, M., Carreau, P., Kamal, M. R., Ton-That, M.-T., & Esmaeili, B. (2014). Solid-state polymerization of poly(ethylene terephthalate): Effect of organoclay concentration. Polymer Engineering and Science, 54(12), 2925-2937. Lien externe
Dini, M., Mousavand, T., Carreau, P., Kamal, M. R., & Ton-That, M.-T. (2014). Effect of water-assisted extrusion and solid-state polymerization on the microstructure of PET/Clay nanocomposites. Polymer Engineering and Science, 54(8), 1723-1736. Lien externe
Dini, M., Mousavand, T., Carreau, P., Kamal, M. R., & Ton-That, M.-T. (2014). Microstructure and properties of poly(ethylene terephthalate)/organoclay nanocomposites prepared by water-assisted extrusion: Effect of organoclay concentration. Polymer Engineering and Science, 54(8), 1879-1892. Lien externe
Dorion-Thibaudeau, J., Raymond, C., Lattova, E., Perreault, H., Durocher, Y., & De Crescenzo, G. (2014). Towards the development of a surface plasmon resonance assay to evaluate the glycosylation pattern of monoclonal antibodies using the extracellular domains of CD16a and CD64. Journal of Immunological Methods, 408, 24-34. Lien externe
Dorval Dion, C. A., Raphael, W., Tong, E., & Tavares, J. R. (2014). Photo-initiated chemical vapor deposition of thin films using syngas for the functionalization of surfaces at room temperature and near-atmospheric pressure. Surface and Coatings Technology, 244, 98-108. Disponible
Dorval-Dion, C. A., & Tavares, J. R. (2014). Methods for the photo-initiated chemical vapor deposition (PICVD) of coatings and coatings produced by these methods. (Demande de brevet no WO2014172789). Lien externe
Doucet, J., Laviolette, J.-P., Farag, S., & Chaouki, J. (2014). Distributed microwave pyrolysis of domestic waste. Waste and Biomass Valorization, 5(1), 1-10. Lien externe
Douieb, S., Fradette, L., Bertrand, F., & Haut, B. (juin 2014). Impact of Agitation on the Growth Rate of CO2 Gas Hydrates in a Semi-Batch Stirred Tank Reactor [Communication écrite]. Mixing XXIV Conference, Lake George, NY, USA. Non disponible
Dubé, D., Bertrand, F., Guibault, F., & Chaouki, J. (juin 2014). Efficient Parallelization of the Radioactive Particle Tracking Technique on GPU [Communication écrite]. High-Performance Computing Symposium (HPCS), Halifax, Nouvelle-Écosse, Canada. Non disponible
Dubé, O., Ackley, M., Celik, C., Chaouki, J., & Bertrand, F. (2014). Discrete element simulation of the dynamics of adsorbents in a radial flow reactor used for gas prepurification. Adsorption: Journal of the International Adsorption Society, 20(1), 91-107. Lien externe
Dube, O., Dube, D., Chaouki, J., & Bertrand, F. (2014). Optimization of detector positioning in the radioactive particle tracking technique. Applied Radiation and Isotopes, 89, 109-124. Lien externe
Ebrahimpour, O., Dubois, C., & Chaouki, J. (2014). Fabrication of mullite-bonded porous SiC ceramics via a sol-gel assisted in situ reaction bonding. Journal of the European Ceramic Society, 34(2), 237-247. Lien externe
Ebrahimpour, O., Dubois, C., & Chaouki, J. (2014). Manufacturing process for in situ reaction-bonded porous SiC ceramics using a combination of graft polymerization and sol-gel approaches. Industrial and Engineering Chemistry Research, 53(45), 17604-17614. Lien externe
Ebrahimpour, O., Esmaeili, B., Griffon, L., Chaouki, J., & Dubois, C. (2014). Novel fabrication route for porous silicon carbide ceramics through the combination of in situ polymerization and reaction bonding techniques. Journal of Applied Polymer Science, 131(13). Lien externe
Esquirol, A.-L., Sarazin, P., & Virgilio, N. (avril 2014). Hydrogels with fully interconnected and tunable pores prepared from co-continuous polymer blends [Résumé]. Pioneering the future of biomaterials : 2014 Annual meeting of the Society for biomaterials, Denver, Col., USA. Lien externe
Esquirol, A.-L., Sarazin, P., & Virgilio, N. (octobre 2014). Hydrogels with size-tunable interconnected micropores prepared with cocontinuous polymer blends [Présentation]. Dans 64th Canadian Chemical Engineering Conference, Niagara Falls, Canada. Non disponible
Esquirol, A.-L., Sarazin, P., & Virgilio, N. (mai 2014). Porous hydrogels prepared from co-continuous polymer blends [Présentation]. Dans 14th International conference on bio-based materials and composites, Montréal, Québec. Non disponible
Esquirol, A.-L., Sarazin, P., & Virgilio, N. (2014). Tunable porous hydrogels from cocontinuous polymer blends. Macromolecules, 47(9), 3068-3075. Lien externe
Farag, S., & Chaouki, J. (février 2014). Microwave-assisted pyrolysis of kraft lignin for value-added bioproducts [Communication écrite]. 4th International Forest Biorefinery Symposium PaperWeek, Montréal, Québec. Non disponible
Farag, S., Fu, D., Jessop, P. G., & Chaouki, J. (2014). Detailed compositional analysis and structural investigation of a bio-oil from microwave pyrolysis of kraft lignin. Journal of Analytical and Applied Pyrolysis, 109, 249-257. Lien externe
Farag, S., Kouisni, L., & Chaouki, J. (2014). Lumped approach in kinetic modeling of microwave pyrolysis of kraft lignin. Energy and Fuels, 28(2), 1406-1417. Lien externe
Farahany, S., Nordin, N. A., Ourdjini, A., Abu Bakar, T., Hamzah, E., Idris, M. H., & Hekmat-Ardakan, A. (2014). The sequence of intermetallic formation and solidification pathway of an Al-13Mg-7Si-2Cu in-situ composite. Materials Characterization, 98, 119-129. Lien externe
Farhanian, D., De Crescenzo, G., & Tavares, J. R. (octobre 2014). Polymeric encapsulation of TiO₂ and ZnO particles using PICVD [Communication écrite]. 64th Canadian Chemical Engineering Conference, Niagara Falls, Ontario. Non disponible
Farhanian, D., De Crescenzo, G., & Tavares, J. R. (décembre 2014). Polymeric encapsulation of TiO₂ powder via PICVD technique [Affiche]. Colloque CREPEC 2014, Montréal, Québec. Non disponible
Farhanian, D., Dorval Dion, C. A., Raphael, W., De Crescenzo, G., & Tavares, J. R. (2014). Combined extraction and functionalization of low-cost nanoparticles from municipal solid waste fly ash through PICVD. Journal of Environmental Chemical Engineering, 2(4), 2242-2251. Disponible
Farhanian, D., Raphael, W., Dorval-Dion, C. A., & Tavares, J. R. (mars 2014). Extraction of nanoparticles from municipal solid waste fly ash via photo-initiated chemical vapor deposition (PICVD) [Communication écrite]. McGill-Polytechnique Chemical Engineering Research Day, Montréal, Québec. Non disponible
Farhanian, D., Raphael, W., Dorval-Dion, C. A., & Tavares, J. R. (juin 2014). Single step extraction and functionalization of low-cost nanoparticles from municipal solid waste fly ash through PICVD [Communication écrite]. Nanotech 2014, Washington, D.C.. Non disponible
Farhanian, D., Tavares, J. R., & De Crescenzo, G. (juin 2014). Versatile functionalization of surfaces through PICVD : Decoupling the plasma from the process [Affiche]. Colloque Plasma-Québec 2014, Montréal, Québec. Non disponible
Farrahi Moghaddam, R., Farrahi Moghaddam, F., Dandres, T., Lemieux, Y., Samson, R., & Cheriet, M. (août 2014). Challenges and complexities in application of LCA approaches in the case of ICT for a sustainable future [Communication écrite]. 2nd International Conference on ICT for Sustainability (ICT4S 2014), Stockholm, Sweden (10 pages). Disponible
Fereydoon, M. (2014). Development of High Barrier Nylon Based Multilayer Films [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Fereydoon, M., Tabatabaei, S. H., & Ajji, A. (2014). Rheological, crystal structure, barrier, and mechanical properties of PA6 and MXD6 nanocomposite films. Polymer Engineering and Science, 54(11), 2617-2631. Lien externe
Fereydoon, M., Tabatabaei, S. H., & Ajji, A. (2014). X-ray and Trichroic Infrared Orientation Analyses of Uniaxially Stretched PA6 and MXD6 Nanoclay Composite Films SO MACROMOLECULES VL 47 IS 7 BP 2384 EP 2395 DI 10.1021/ma402466c PD APR 8 2014 PY 2014 TC 2 ZB 0. Macromolecules, 47(7), 2384-2395. Lien externe
Fortier, C., Durocher, Y., & De Crescenzo, G. (2014). Surface modification of nonviral nanocarriers for enhanced gene delivery. Nanomedicine, 9(1), 135-151. Lien externe
Fotovat, F., Chaouki, J., & Bergthorson, J. (2014). Distribution of large biomass particles in a sand-biomass fluidized bed: Experiments and modeling. AICHE Journal, 60(3), 869-880. Lien externe
François, G., Srinivasan, B., & Bonvin, D. (2014). Equivalence between neighboring-extremal control and self-optimizing control for the steady-state optimization of dynamical systems. Industrial and Engineering Chemistry Research, 53(18), 7470-7478. Lien externe
Fu, D., Farag, S., Chaouki, J., & Jessop, P. G. (2014). Extraction of phenols from lignin microwave-pyrolysis oil using a switchable hydrophilicity solvent. Bioresource Technology, 154, 101-108. Lien externe
Gancheva, T., & Virgilio, N. (octobre 2014). A novel method to prepare stimuli-sensitive porous hydrogels using cocontinuous polymer blends [Présentation]. Dans 64th Canadian Chemical Engineering Conference, Niagara Falls, Canada. Non disponible
Garon, M., Savard, P., Legaré, A., & Buschmann, M. D. (2014). Characterization of the contact distribution between two arbitrary surfaces using electrode arrays. (Brevet no CA2378705). Lien externe
Ghavidel Mehr, N. (2014). Highly Structured and Surface Modified Poly (e-Caprolactone) Scaffolds Derived from Co-Continuous Polymer Blends for Bone Tissue Engineering [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Ghavidel Mehr, N., Li, X., Ariganello, M. B., Hoemann, C. D., & Favis, B. D. (2014). Poly(-caprolactone) scaffolds of highly controlled porosity and interconnectivity derived from co-continuous polymer blends: model bead and cell infiltration behavior. Journal of Materials Science: Materials in Medicine, 25(9), 2083-2093. Lien externe
Ghaznavi, T. (2014). Conversion of D-Xylose to Carboxylic Acids in a Capillary Fluidized Bed [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Ghaznavi, T., Neagoe, C., & Patience, G. S. (2014). Partial oxidation of d-xylose to maleic anhydride and acrylic acid over vanadyl pyrophosphate. Biomass and Bioenergy, 71, 285-293. Lien externe
Gheribi, A. E., Corradini, D., Dewan, L., Chartrand, P., Simon, C., Madden, P. A., & Salanne, M. (2014). Prediction of the thermophysical properties of molten salt fast reactor fuel from first-principles. Molecular Physics, 112(9-10), 1306-1312. Lien externe
Gheribi, A. E., Gardarein, J.-L., Rigollet, F., & Chartrand, P. (2014). Evidence of second order transition induced by the porosity in the thermal conductivity of sintered metals. APL Materials, 2(7), 076105 (6 pages). Disponible
Gheribi, A. E., Poncsák, S., St-Pierre, R., Kiss, L. I., & Chartrand, P. (2014). Thermal conductivity of halide solid solutions: Measurement and prediction. Journal of Chemical Physics, 141(10), 12-12. Lien externe
Gheribi, A. E., Torres, J. A., & Chartrand, P. (2014). Recommended values for the thermal conductivity of molten salts between the melting and boiling points. Solar Energy Materials and Solar Cells, 126, 11-25. Lien externe
Ghorbaniaghdam, A., Chen, J., Henry, O., & Jolicoeur, M. (2014). Analyzing Clonal Variation of Monoclonal Antibody-Producing CHO Cell Lines Using an In Silico Metabolomic Platform. PLOS One, 9(3). Disponible
Ghorbaniaghdam, A., Henry, O., & Jolicoeur, M. (2014). An in-silico study of the regulation of CHO cells glycolysis. Journal of Theoretical Biology, 357, 112-122. Lien externe
Gilani, B. (2014). Sustainability Assessment of the Hot Water Extraction Biorefinery Process Using a Phased Implementation Approach [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Gilani, B., Chambost, V., & Stuart, P. R. (octobre 2014). Phased Approach for the Implementation of the Hot Water Extraction Process [Communication écrite]. TAPPI International Bioenergy and Bioproducts Conference (IBBC), Tacoma, Washington. Non disponible
Gonzalez, L., Lafleur, P., Lozano, T., Morales, A. B., Garcia, R., Angeles, M., Rodriguez, F., & Sanchez, S. (2014). Mechanical and thermal properties of polypropylene/montmorillonite nanocomposites using stearic acid as both an interface and a clay surface modifier. Polymer Composites, 35(1), 1-9. Lien externe
Grmela, M. (2014). Contact geometry of mesoscopic thermodynamics and dynamics. Entropy, 16(3), 1652-1686. Disponible
Grmela, M. (2014). Mass flux in extended and classical hydrodynamics. Physical Review E - Statistical, Nonlinear, and Soft Matter Physics, 89(6). Lien externe
Grmela, M. (novembre 2014). Thermodynamics of Reductions in Multiscale Dynamics [Communication écrite]. 1st International Electronic Conference on Entropy and Its Applications, Switzerland (13 pages). Disponible
Grmela, M., Ammar, A., Chinesta, F., & Maîtrejean, G. (2014). A mesoscopic rheological model of moderately concentrated colloids. Journal of Non-Newtonian Fluid Mechanics, 212, 1-12. Lien externe
Guo, S., Heuzey, M.-C., & Therriault, D. (2014). Properties of polylactide inks for solvent-cast printing of three-dimensional freeform microstructures. Langmuir, 30(4), 1142-1150. Disponible
Guzmán-Morales, J., Lafantaisie-Favreau, C. H., Chen, G., & Hoemann, C. D. (2014). Subchondral chitosan/blood implant-guided bone plate resorption and woven bone repair is coupled to hyaline cartilage regeneration from microdrill holes in aged rabbit knees. Osteoarthritis and Cartilage, 22(2), 323-333. Lien externe
Haddad, T. (2014). Fabrication and Surface Modification of Poly L-Lactic Acid Nanostructures for Growth Factor Immobilization and Neural Stem Cell Delivery [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Han, Q., Buschmann, M. D., & Savard, P. (2014). The forward problem of electroarthrography: Modeling load-induced electrical potentials at the surface of the knee. IEEE Transactions on Biomedical Engineering, 61(7), 2020-2027. Lien externe
Harvey, J.-P., & Gheribi, A. E. (2014). Process simulation and control optimization of a blast furnace using classical thermodynamics combined to a direct search algorithm. Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 45(1), 307-327. Lien externe
Harvey, V. C., Farand, P., Legros, R., & Tavares, J. R. (octobre 2014). On the average perception of perceived averages [Communication écrite]. 64th Canadian Chemical Engineering Conference, Niagara Falls, Ontario. Non disponible
Heshmati, V., Kamal, M. R., & Favis, B. D. (avril 2014). Poly (Lactic acid)/Polyamide11/Cellulose Multiphase Systems [Communication écrite]. 72nd Annual Technical Conference of the Society of Plastics Engineers: The Plastics Conference (ANTEC 2014), Las Vegas, NV, United states. Lien externe
Imbeault-Tétreault, H., Lesage, P., Estrela, S., & Samson, R. (août 2014). Integration of Québec wood industry data in the Québec LCI database: How can the industry directly benefit? [Communication écrite]. World Conference on Timber Engineering: Renaissance of Timber Construction (WCTE 2014), Québec City, QC, Canada. Non disponible
Jalali Dil, E., & Favis, B. D. (avril 2014). Effect of the localization of silica particles on the morphology of poly(lactic acid)/polyethylene blends [Communication écrite]. 72nd Annual Technical Conference of the Society of Plastics Engineers: The Plastics Conference (ANTEC 2014), Las Vegas, NV, United states. Lien externe
Jean, M., Behhammadi, M., Sidique, A., Jeandupeux, D., Merzouki, A., & Buschmann, M. D. (mai 2014). P-Glycoprotein knock-down by Chitosan/Mdr1-siRNA nanoparticles increases sensitivity to chemotherapeutics [Résumé]. 17th Annual Meeting of the American Society of Gene & Cell Therapy, Washington, DC (1 page). Publié dans Molecular Therapy, 22(S1). Disponible
Jean, M., Derbali, R., DeJesus, D., Jeandupeux, D., Merzouki, A., & Buschmann, M. D. (mai 2014). Apolipoprotein B knock-down by Chitosan/ApoB-siRNA nanoparticles lowers plasma cholesterol in atherosclerosis mouse model [Résumé]. 17th Annual Meeting of the American Society of Gene & Cell Therapy, Washington, DC (1 page). Publié dans Molecular Therapy, 22(S1). Disponible
Jean, M., Jeandupeux, D., Merzouki, A., & Buschmann, M. D. (mai 2014). Combining delivery of GLP-1 gene expressing plasmid and DPP-4 gene silencing siRNA using Chitosan-based nanoparticles for Type-2 Diabetes treatment [Résumé]. 17th Annual Meeting of the American Society of Gene & Cell Therapy, Washington, DC (1 page). Publié dans Molecular Therapy, 22(S1). Disponible
Jezierski, A., Rennie, K., Zurakowski, B., Ribecco-Lutkiewicz, M., Haukenfrers, J., Ajji, A., Gruslin, A., Sikorska, M., & Bani-Yaghoub, M. (2014). Neuroprotective Effects of GDNF-expressing Human Amniotic Fluid Cells. Stem Cell Reviews and Reports, 10(2), 251-268. Lien externe
Jolicoeur, M. (2014). Modeling cell behavior: moving beyond intuition. AIMS Bioengineering, 1(1), 1-12. Disponible
Keshtkar, M., Nofar, M., Park, C. B., & Carreau, P. (2014). Extruded PLA/clay nanocomposite foams blown with supercritical CO 2. Polymer, 55(16), 4077-4090. Lien externe
Kevorkov, D., Medraj, M., Aljarrah, M., Li, J., Essadiqi, E., Chartrand, P., & Fuerst, C. (2014). Experimental study of the Al-Mg-Sr phase diagram at 400°C. Journal of Metallurgy, 2014, 1-6. Disponible
Khademi, R., Mohebbi-Kalhori, D., & Hadjizadeh, A. (2014). Computational study of culture conditions and nutrient supply in a hollow membrane sheet bioreactor for large-scale bone tissue engineering. Journal of Artificial Organs, 17(1), 69-80. Lien externe
Klika, V., & Grmela, M. (2014). Mechano-chemical coupling in Belousov-Zhabotinskii reactions. Journal of Chemical Physics, 140(12). Lien externe
Kolahchi, A. R., Ajji, A., & Carreau, P. (2014). Surface Morphology and Properties of Ternary Polymer Blends: Effect of the Migration of Minor Components. Journal of Physical Chemistry B, 118(23), 6316-6323. Lien externe
Kolahchi, A. R., Carreau, P., & Ajji, A. (2014). Surface Roughening of PET Films through Blend Phase Coarsening. ACS Applied Materials & Interfaces, 6(9), 6415-6424. Lien externe
Korbel, M., Bellec, S., Jiang, T., & Stuart, P. R. (2014). Steady state identification for on-line data reconciliation based on wavelet transform and filtering. Computers and Chemical Engineering, 63, 206-218. Lien externe
Labonté, M. (2014). Les bioplastiques dans les emballages rigides : le matériau, sa mise en forme et sa modélisation [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Labonté, V., Virgilio, N., & Tavares, J. R. (décembre 2014). Wettability enhancement of polystyrene-divinylbenzene beads [Affiche]. Colloque CREPEC 2014, Montréal, Québec. Non disponible
Lafleur, P., & Vergnes, B. (2014). Extrusion des polymères. Lien externe
Lafleur, P., & Vergnes, B. (2014). Polymer extrusion. Lien externe
Lanteigne, J.-R. (2014). Modélisation et simulation de pyrolyse de pneus usagés dans des réacteurs de laboratoire et industriel [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Lassaigne, M., Blais, B., Ayranci, I., Bertrand, F., & Fradette, L. (octobre 2014). Mixing of Viscous Liquids and Large Concentrations of Spherical Particles in Stirred Tanks [Communication écrite]. 64th CSChE Annual Meeting, Niagara Falls, Ontario, Canada. Non disponible
Lassaigne, M., Blais, B., Ayranci, I., Fradette, L., & Bertrand, F. (juin 2014). Mixing of Viscous Liquids and Large Concentrations of Spherical Particles in Stirred Tanks [Communication écrite]. Mixing XXIV Conference, Lake George, NY, USA. Non disponible
Latifi, M., Berruti, F., & Briens, C. (2014). Non-catalytic and catalytic steam reforming of a bio-oil model compound in a novel "jiggle Bed" Reactor. Fuel, 129, 278-291. Lien externe
Latifi, M., Berruti, F., & Briens, C. (2014). A novel fluidized and induction heated microreactor for catalyst testing. AICHE Journal, 60(9), 3107-3122. Lien externe
Lebailly, F., Levasseur, A., Samson, R., & Deschênes, L. (2014). Development of a dynamic LCA approach for the freshwater ecotoxicity impact of metals and application to a case study regarding zinc fertilization. International Journal of Life Cycle Assessment, 19(10), 1745-1754. Lien externe
Lequoy, P., Liberelle, B., De Crescenzo, G., & Lerouge, S. (2014). Additive benefits of chondroitin sulfate and oriented tethered epidermal growth factor for vascular smooth muscle cell survival. Macromolecular Bioscience, 14(5), 720-730. Lien externe
Lessard, I., Sauve, S., & Deschênes, L. (2014). Enzymatic functional stability of Zn-contaminated field-collected soils: An ecotoxicological perspective. Science of The Total Environment, 484, 1-9. Lien externe
Lessard, I., Sauvé, S., & Deschênes, L. (2014). Toxicity response of a new enzyme-based functional diversity methodology for Zn contaminated field-collected soils. Soil Biology & Biochemistry, 71, 87-94. Lien externe
Liang, G., Liu, Y., Zhang, X., & Yi, Z. (2014). Anion-dependent assemblies of a series of Cd(II) coordination complexes based on an asymmetric multi-dentate ligand and inorganic SBUs: syntheses, crystal structures, and fluorescent properties. CrystEngComm, 16(42), 9896-9906. Lien externe
Liberelle, B., Fortier, C., & De Crescenzo, G. (2014). Enhanced ELISA based on carboxymethylated dextran coatings. Dans Cytokine Bioassays (Vol. 1172, p. 39-47). Lien externe
Lujan-Acosta, R., Sanchez-Valdes, S., Ramirez-Vargas, E., Ramos-DeValle, L. F., Espinoza-Martinez, A. B., Rodriguez-Fernandez, O. S., Lozano-Ramirez, T., & Lafleur, P. (2014). Effect of Amino alcohol functionalized polyethylene as compatibilizer for LDPE/EVA/clay/flame-retardant nanocomposites. Materials Chemistry and Physics, 146(3), 437-445. Lien externe
Mansoornejad, B., Sanaei, S., Gilani, B., Benali, M., & Stuart, P. R. (juillet 2014). Application of Process Systems Engineering (PSE) Tools in Designing the Biorefinery [Communication écrite]. 8th Foundations of Computer-Aided Process Design (FOCAPD) Conference, Cle Elum, Washington. Lien externe
Marinova, M., Perrier, M., & Paris, J. (2014). Implementation of a Forest Biomass-based Biofuel Industry: A Canadian Experience. Renewable Energy and Power Quality Journal, 942-947. Lien externe
Martinez-Colunga, J. G., Sanchez-Valdes, S., Ramos-Devalle, L. F., Munoz-Jimenez, L., Ramirez-Vargas, E., Ibarra-Alonso, M. C., Lozano-Ramirez, T., & Lafleur, P. (2014). Simultaneous polypropylene functionalization and nanoclay dispersion in PP/Clay nanocomposites using ultrasound. Journal of Applied Polymer Science, 131(16). Lien externe
Marty, S. (2014). Production d'oxyde de calcium et de dioxyde de soufre à partir de la décomposition du phosphogypse [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Matet, M. (2014). Préparation de films à base de chitosane par voie fondue [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Matet, M., Heuzey, M.-C., & Ajji, A. (2014). Morphology and antibacterial properties of plasticized chitosan/metallocene polyethylene blends. Journal of Materials Sciences, 49(15), 5427-5440. Lien externe
Matte-Deschênes, G. (2014). Modélisation de l'efficacité de capture de filtres particulaires pour moteur diesel [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Matte-Deschênes, G., Vidal, D., Bertrand, F., & Hayes, R. E. (octobre 2014). Simulation of the Impact of Thermophoresis on the Efficiency of Diesel Particulate Filters [Communication écrite]. 64th CSChE Annual Meeting, Niagara Falls, Ontario, Canada. Non disponible
McNabb, J., Devals, C., Kyriacou, S. A., Murry, N., & Mullins, B. F. (septembre 2014). CFD based draft tube hydraulic design optimization [Communication écrite]. 27th IAHR Symposium on Hydraulic Machinery and Systems (IAHR 2014), Montréal, QC, Canada. Lien externe
Mehand, M. S., De Crescenzo, G., & Srinivasan, B. (2014). On-line kinetic model discrimination for optimized surface plasmon resonance experiments. Journal of Molecular Recognition, 27(5), 276-284. Lien externe
Mendez-Portillo, L. S., Dubois, C., & Tanguy, P. A. (2014). Free-radical polymerization of styrene using a split-and-recombination (SAR) and multilamination microreactors. Chemical Engineering Journal, 256, 212-221. Lien externe
Meng, Q., Heuzey, M.-C., & Carreau, P. (2014). Hierarchical Structure and Physicochemical Properties of Plasticized Chitosan. Biomacromolecules, 15(4), 1216-1224. Lien externe
Mighri, F., Duong, V. T. T., On, D. T., & Ajji, A. (juillet 2013). Synthesis of capped TiO2 nanocrystals of controlled shape and their use with MEH-PPV conjugated polymer to develop nanocomposite films for photovoltaic applications [Communication écrite]. 29th International Conference of the Polymer Processing Society (PPS 2013), Nuremberg, Germany. Lien externe
Moayeri, A., & Ajji, A. (novembre 2013). Preparation of graphene based nanocomposites in electrospun polyaniline/polyethylene oxide blends [Communication écrite]. Nanoscale Science and Engineering Forum 2013 - Core Programming Area at the 2013 AIChE Annual Meeting: Global Challenges for Engineering a Sustainable Future, San Francisco, CA, United states. Non disponible
Mohammadi, S. (2014). Adapting the Experience Curve for Estimating Biorefinery Costs [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Mohammadzadeh Rohani, N. (2014). Design Methodology for Integrated Downstream Separation Systems in an Ethanol Biorefinery [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Motoshita, M., Ono, Y., Pfister, S., Boulay, A.-M., Berger, M., Nansai, K., Tahara, K., Itsubo, N., & Inaba, A. (2014). Consistent characterisation factors at midpoint and endpoint relevant to agricultural water scarcity arising from freshwater consumption. The International Journal of Life Cycle Assessment, 23(12), 2276-2287. Disponible
Nada, O., Marian, A., Tran-Khanh, N., Buschmann, M. D., Podtetenev, M., Vidal, F., Costantino, S., & Brunette, I. (2014). Effect of Corneal Hydration on the Quality of the Femtosecond Laser Anterior Lamellar Cut. PLOS One, 9(6). Disponible
Najafi Chaloupli, N., Heuzey, M.-C., Carreau, P., Therriault, D., & Park, C. B. (2014). Rheological and foaming behavior of linear and branched polylactides. Rheologica Acta, 53(10-11), 779-790. Disponible
Najarzadeh, Z. (2014). Control and Optimization of Sealing Layer in Films [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Najarzadeh, Z., & Ajji, A. (avril 2014). Effect of seal process parameters on final seal strength behavior for LLDPE [Communication écrite]. 72nd Annual Technical Conference of the Society of Plastics Engineers: The Plastics Conference (ANTEC 2014), Las Vegas, NV, United states. Non disponible
Najarzadeh, Z., & Ajji, A. (octobre 2014). Effect of seal process parameters on final seal strength behavior for LLDPE (FlexPackCon-Science of Sealing) [Communication écrite]. Web Coating and Handling Conference, Myrtle Beach, SC. Non disponible
Najarzadeh, Z., & Ajji, A. (2014). A novel approach toward the effect of seal process parameters on final seal strength and microstructure of LLDPE. Journal of Adhesion Science and Technology, 28(16), 1592-1609. Lien externe
Najarzadeh, Z., Tabasi, R. Y., & Ajji, A. (2014). Sealability and seal characteristics of PE/EVA and PLA/PCL blends. International Polymer Processing, 29(1), 95-102. Lien externe
Natale, G., Heuzey, M.-C., Carreau, P., Ausias, G., & Ferec, J. (2014). Rheological modeling of carbon nanotube suspensions with rod-rod interactions. AICHE Journal, 60(4), 1476-1487. Lien externe
Niebel, Y., Buschmann, M. D., Lavertu, M., & De Crescenzo, G. (2014). Combined Analysis of Polycation/ODN Polyplexes by Analytical Ultracentrifugation and Dynamic Light Scattering Reveals their Size, Refractive Index Increment, Stoichiometry, Porosity, and Molecular Weight. Biomacromolecules, 15(3), 940-947. Lien externe
Ouzilleau, P. (2014). Développement d'un modèle thermodynamique pour les cristallites de coke : application aux systèmes carbone-hydrogène et carbone-soufre [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Patel, J. D., Mighri, F., & Ajji, A. (2014). A facile route towards the preparation of ZnSe nanocrystals. Materials Letters, 131, 366-369. Lien externe
Patel, J., Mighri, F., Ajji, A., & Chaudhuri, T. K. (2014). Facile synthesis of CdSe nanocrystals for bulk-heterojunction solar cells. Journal of Materials Science: Materials in Electronics, 25(9), 4051-4057. Lien externe
Patel, J., Mighri, F., Ajji, A., & Chaudhuri, T. K. (2014). Solution processed approaches for bulk-heterojunction solar cells based on Pb and Cd chalcogenide nanocrystals. Nano Energy, 5, 36-51. Lien externe
Patel, J., Mighri, F., Ajji, A., Tiwari, D., & Chaudhuri, T. K. (2014). Spin-coating deposition of PbS and CdS thin films for solar cell application. Applied Physics A: Materials Science and Processing, 117(4), 1791-1799. Lien externe
Pavelka, M., Klika, V., & Grmela, M. (2014). Time reversal in nonequilibrium thermodynamics. Physical Review E - Statistical, Nonlinear, and Soft Matter Physics, 90(6). Lien externe
Pelton, A. (2014). Thermodynamics and Phase Diagrams. Dans Physical Metallurgy (p. 203-303). Lien externe
Pelton, A., Koukkari, P., Pajarre, R., & Eriksson, G. (2014). Para-equilibrium phase diagrams. Journal of Chemical Thermodynamics, 72, 16-22. Lien externe
Piche, M., Pelton, A., & Brochu, C. (2014). A Thermodynamic Database for Magnesium Alloys. Dans Essential Readings in Magnesium Technology (p. 411-414). Lien externe
Pinsonnault, A., Lesage, P., Levasseur, A., & Samson, R. (2014). Temporal differentiation of background systems in LCA: relevance of adding temporal information in LCI databases. International Journal of Life Cycle Assessment, 19(11), 1843-1853. Lien externe
Pirola, C., Galli, F., Bianchi, C. L., Boffito, D. C., Comazzi, A., & Manenti, F. (2014). Vegetable oil deacidification by methanol heterogeneously catalyzed esterification in (monophasic liquid)/solid batch and continuous reactors. Energy and Fuels, 28(8), 5236-5240. Lien externe
Pirola, C., Manenti, F., Galli, F., Bianchi, C. L., Boffito, D. C., & Corbetta, M. (2014). Heterogeneously catalyzed free fatty acids esterification in (monophasic liquid)/solid packed bed reactors (PBR). Chemical Engineering Transactions, 37, 553-558. Lien externe
Plouffe, G. (2014). Intégrer la spéciation des métaux en écotoxicité terrestre pour l'analyse du cycle de vie : le cas du zinc [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Rafione, T. (2014). Développement d'une bioraffinerie forestière intégrée et verte [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Rafione, T., Marinova, M., Montastruc, L., & Paris, J. (2014). The Green Integrated Forest Biorefinery: An innovative concept for the pulp and paper mills. Applied Thermal Engineering, 73(1), 74-81. Lien externe
Ravati, S., Beaulieu, C., Zolali, A. M., & Favis, B. D. (2014). High performance materials based on a self-assembled multiple-percolated ternary blend. AICHE Journal, 60(8), 3005-3012. Lien externe
Ravati, S., Poulin, S., Piyakis, K., & Favis, B. D. (2014). Phase identification and interfacial transitions in ternary polymer blends by ToF-SIMS. Polymer, 55(23), 6110-6123. Lien externe
Recio-Garrido, D., Perrier, M., & Tartakovsky, B. (juin 2014). Parameter estimation of a microbial fuel cell process control-oriented model [Communication écrite]. 22nd Mediterranean Conference on Control and Automation (MED 2014), Palermo, Italy. Lien externe
Rezaei Kolahchi, A. (2014). Polyethylene Terephthalate (PET) Films Surface Modification Through Blending [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Robelin, C. (août 2014). Models for the thermodynamic properties and physical properties (density, viscosity) of molten salt systems : perspectives for ionic liquids [Présentation]. Dans Symposium on Advances in Computational Thermodynamics, Montebello, Quebec, Canada. Non disponible
Robelin, C., Gheribi, A. E., & Chartrand, P. (juillet 2014). Thermodynamic models for chloro-fluoride and fluoro-oxide reciprocal salt systems of industrial interest [Présentation]. Dans EUCHEM Conference on Molten Salts and Ionic Liquids XXV, Tallinn, Estonia. Non disponible
Rofouie, P., Moshkelani, M., Perrier, M., & Paris, J. (2014). A modified thermodynamic equilibrium model for woody biomass gasification. Canadian Journal of Chemical Engineering, 92(4), 593-602. Lien externe
Rokbani, H., & Ajji, A. (avril 2014). Antimicrobial activity of PCL/ZnO electrospun nanofibers [Communication écrite]. 72nd Annual Technical Conference of the Society of Plastics Engineers: The Plastics Conference (ANTEC 2014), Las Vegas, NV, United states. Non disponible
Roquebert, B. (2014). Extrusion-gonflage de films de polyéthylène en mousse pour application à une géomembrane : détermination des paramètres optimaux du procédé [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Rostamizadeh, M., Boffito, D. C., Patience, G. S., & Taeb, A. (2014). Neural network modeling of methanol to propylene over P-ZSM-5 in a fluidized bed. Journal of Chemical and Process Engineering, 1(2), 8 pages. Lien externe
Roy, P.-O., Azevedo, L. B., Margni, M., van Zelm, R., Deschênes, L., & Huijbregts, M. A. J. (2014). Characterization factors for terrestrial acidification at the global scale: A systematic analysis of spatial variability and uncertainty. Science of The Total Environment, 500, 270-276. Lien externe
Roy, P.-O., Deschênes, L., & Margni, M. (2014). Uncertainty and spatial variability in characterization factors for aquatic acidification at the global scale. International Journal of Life Cycle Assessment, 19(4), 882-890. Lien externe
Sabri, F., Fradette, L., Tavares, J. R., & Virgilio, N. (octobre 2014). Processing of highly viscous solid-stabilized emulsions [Présentation]. Dans 64th Canadian Chemical Engineering Conference, Niagara Falls, Canada. Non disponible
Sabri, F., Fradette, L., Tavares, J. R., & Virgilio, N. (octobre 2014). Processing of solid stabilized emulsions [Communication écrite]. 64th Canadian Chemical Engineering Conference, Niagara Falls, Ontario. Non disponible
Sadeghi, F., & Ajji, A. (2014). Application of single site catalyst metallocene polyethylenes in extruded films: Effect of molecular structure on sealability, flexural cracking and mechanical properties. Canadian Journal of Chemical Engineering, 92(7), 1181-1188. Lien externe
Sadeghi, F., & Ajji, A. (2014). Effect of molecular structure on seal ability, flex crack and mechanical properties of linear low-density polyethylene films. Journal of Plastic Film and Sheeting, 30(1), 91-111. Lien externe
Saffar, A. (2014). Development of Polypropylene Microporous Hydrophilic Membranes Through Cast Extrusion and Stretching [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Saffar, A., Ajji, A., Carreau, P., & Kamal, M. R. (2014). The impact of new crystalline lamellae formation during annealing on the properties of polypropylene based films and membranes. Polymer Engineering and Science, 55(14), 3156-3167. Lien externe
Saffar, A., Ajji, A., Carreau, P., & Katnal, M. R. (avril 2014). Development of polypropylene microporous hydrophilic membranes by blending with acrylic acid grafted polypropylene [Communication écrite]. 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2014), Las Vegas, NV, United states. Lien externe
Saffar, A., Carreau, P., Ajji, A., & Kamal, M. R. (2014). Development of polypropylene microporous hydrophilic membranes by blending with PP-g-MA and PP-g-AA. Journal of Membrane Science, 462, 50-61. Lien externe
Saffar, A., Carreau, P., Ajji, A., & Kamal, M. R. (2014). Influence of Stretching on the Performance of Polypropylene-Based Microporous Membranes. Industrial & Engineering Chemistry Research, 53(36), 14014-14021. Lien externe
Saffar, A., Carreau, P., Kamal, M. R., & Ajji, A. (2014). Hydrophilic modification of polypropylene microporous membranes by grafting TiO2 nanoparticles with acrylic acid groups on the surface. Polymer, 55(23), 6069-6075. Lien externe
Salom, S., Oliveira, C., Savadogo, O., & Rego, R. (octobre 2014). Improving the activity and stability of PdSn catalyst for oxygen reduction by heat treatment [Communication écrite]. 14th Polymer Electrolyte Fuel Cell Symposium (PEFC 2014)/2014 ECS and SMEQ Joint International Meeting, Cancun, Mexico. Publié dans ECS Transactions, 64(3). Lien externe
Salomé, S., Oliveira, M.C., Savadogo, O., & Rego, R. (2014). Improving the Activity and Stability of PdSn Catalyst for Oxygen Reduction by Heat Treatment. ECS Meeting Abstracts, MA2014-02(21), 1040-1040. Lien externe
Samson, R., Cherriet, M., Lemieux, Y., Nguyen, K., Farrahi Moghaddam, R., Dandres, T., & Maurice, E. (août 2014). Modelling of electricity mix in temporal differentiated life-cycle-assessment to minimize carbon footprint of a cloud computing service [Communication écrite]. 2014 Conference ICT for Sustainability (ICT4S-14), Stockhom, Switzerland. Publié dans Advances in Computer Science Research, 2. Disponible
Sanaei, S. (2014). Sustainability Assessment of Biorefinery Strategies Under Uncertainty and Risk Using Multi-Criteria Decision-Making (MCDM) Approach [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Sanaei, S., & Stuart, P. R. (2014). Systematic retrofit design methodology for evaluation of integratedforest biorefinery strategies. J-FOR, 4(2), 19-28. Non disponible
Savoji, H., Hadjizadeh, A., Maire, M., Ajji, A., Wertheimer, M. R., & Lerouge, S. (2014). Electrospun nanofiber scaffolds and plasma polymerization: A promising combination towards complete, stable endothelial lining for vascular grafts. Macromolecular Bioscience, 14(8), 1084-1095. Lien externe
Saxena, S. K., Eriksson, G., Brosh, E., & Pelton, A. (septembre 2014). Chemical composition of Earth's core [Résumé]. 77th Annual Meeting of the Meteoritical Society, Casablanca, Morocco. Publié dans Meteoritics & Planetary Science, 49(S1). Lien externe
Sayago, J., Shafique, U., Soavi, F., Cicoira, F., & Santato, C. (2014). TransCap: A monolithically integrated supercapacitor and electrolyte-gated transistor. Journal of Materials Chemistry C, 2(48), 10273-10276. Lien externe
Sayago, J., Soavi, F., Sivalingam, Y., Cicoira, F., & Santato, C. (2014). Low voltage electrolyte-gated organic transistors making use of high surface area activated carbon gate electrodes. Journal of Materials Chemistry C, 2(28), 5690-5694. Lien externe
Seifitokaldani, A. (2014). Oxygen Reduction Reaction (ORR) on Mixed Oxy-Nitride Non-Noble Catalyst: AB-Initio Simulation, Elaboration and Characterization [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Seifitokaldani, A., Perrier, M., & Savadogo, O. (2014). Oxygen Reduction Reaction (ORR) on a Mixed Titanium Oxy-nitride Catalyst prepared by sol-gel method. Journal of New Materials for Electrochemical Systems, 17(2), 55-65. Lien externe
Seifitokaldani, A., Savadogo, O., & Perrier, M. (2014). Density Functional Theory (DFT) Computation of the Oxygen Reduction Reaction (ORR) on Titanium Nitride (TiN) surface. Electrochimica Acta, 141, 25-32. Lien externe
Shabanian, J., & Chaouki, J. (2014). Local characterization of a gas-solid fluidized bed in the presence of thermally induced interparticle forces. Chemical Engineering Science, 119, 261-273. Lien externe
Shabanian, J., Sauriol, P., Rakib, A., & Chaouki, J. (mai 2014). Characterization of gas-solid fluidization at high temperature by analysis of pressure signals [Communication écrite]. 11th International Conference on Fluidized Bed Technology, CFB 2014, Beijing, China. Non disponible
Shahverdi-Shahraki, K. (2014). Development of Pet/Kaolin Nanocomposites with Improved Mechanical Properties [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Sheikholeslami, Z., Jolicoeur, M., & Henry, O. (2014). Elucidating the effects of postinduction glutamine feeding on the growth and productivity of CHO cells. Biotechnology Progress, 30(3), 535-546. Lien externe
Shouzhen, Y., Runda, G., YuKun, W., Pingrui, Y., Shiming, Z., Zhensong, Z., Dalong, Q., & Yi, Z. (2014). Optical simulation and optimization of weak-microcavity tandem white organic light-emitting diodes. Journal of Applied Physics, 116(15). Lien externe
Silverwood, R. J., Tabatabae, H., & Ajji, A. (octobre 2014). Peelable-resealable films: FTIR characterisation and peel strength [Communication écrite]. Web Coating and Handling Conference, Myrtle Beach, SC. Lien externe
Sim, S., Chevrier, A., Garon, M., Quenneville, E., Yaroshinsky, A., Hoemann, C. D., & Buschmann, M. D. (2014). Non-destructive electromechanical assessment (Arthro-BST) of human articular cartilage correlates with histological scores and biomechanical properties. Osteoarthritis and Cartilage, 22(11), 1926-1935. Lien externe
Sim, S., Lavoie, J. F., Moreau, A., Garon, M., Quenneville, E., & Buschmann, M. D. (2014). Novel Technique to Map the Biomechanical Properties of Entire Mice Articular Surfaces Using Indentation. Osteoarthritis and Cartilage, 22, S310-S311. Lien externe
Soavi, F., Sayago, J., Cicoira, F., & Santato, C. (2014). Sub-1 V Electrolyte-Gated Polymer Transistors with Ionic Liquid Electrolyte and High-Surface Area Carbon Gate Electrode. ECS Meeting Abstracts, MA2014-01(23), 1026-1026. Lien externe
Sojoudiasli, H.;., Carreau, P., & Heuzey, M.-C. (2014). Rheological, morphological and mechanical properties of flax fiber polypropylene composites: influence of compatibilizers. Cellulose, 21(5), 3797-3812. Lien externe
Soni, P., Ruiz, E., Lozano, T., Morales, A. B., Lafleur, P., Martínez, G., & Sánchez, S. (2014). Mejoramiento de la Tenacidad de Polipropileno con nanopartículas de Carbonato de Calcio. Química Hoy, 4(4), 5 pages. Disponible
Spreutels, L., Haut, B., Chaouki, J., Bertrand, F., & Legros, R. (2014). Conical Spouted Bed Drying of Baker's yeast: experimentation and multi-modeling. Food Research International, 62, 137-150. Lien externe
Stobiac, V., Fradette, L., Tanguy, P. A., & Bertrand, F. (2014). Pumping characterisation of the maxblend impeller for Newtonian and strongly non-Newtonian fluids. Canadian Journal of Chemical Engineering, 92(4), 729-741. Lien externe
Stobiac, V., Tanguy, P. A., & Bertrand, F. (2014). Investigation of the accuracy of the extrapolation method for the lattice Boltzmann simulation of viscous fluid flow in a Maxblend impeller system. Computers and Chemical Engineering, 60, 112-123. Lien externe
Stuart, P. R. (juin 2014). Practicing What We Preach: Product and Process Design for Assessing Successful Forest Industry Transformation Strategies [Présentation]. Dans 1st annual Design, Diversity, and Innovation Summit, Toronto, Canada. Non disponible
Stuart, P. R. (janvier 2014). Product and Process Design for Forest Industry Transformation: Delivering Added-Value Products Via Unique Supply Chains [Présentation]. Dans Pierre Carreau/Eugenie Lamothe Seminar Series, Montréal, Qc, Canada. Non disponible
Taguet, A., Bureau, M. N., Huneault, M. A., & Favis, B. D. (2014). Toughening mechanisms in interfacially modified HDPE/thermoplastic starch blends. Carbohydrate Polymers, 114, 222-229. Lien externe
Taing, É. (2014). Influence des mélanges complexes organiques sur le sort des dioxines et furanes : implications dans le développement de facteurs de caractérisation en analyse du cycle de vie [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Talebi-Esfandarani, M., & Savadogo, O. (2014). Effects of palladium doping on the structure and electrochemical properties of LiFePO₄/C prepared using the sol-gel method. Journal of New Materials for Electrochemical Systems, 17(2), 91-97. Lien externe
Talebi-Esfandarani, M., & Savadogo, O. (2014). Enhancement of electrochemical properties of platinum doped LiFePO 4/C cathode material synthesized using hydrothermal method. Solid State Ionics, 261, 81-86. Lien externe
Talebi-Esfandarani, M., & Savadogo, O. (2014). The Influence of Platinum Doping on the Structure, Morphology and Electrochemical Properties of LiFePO4/C Cathode Material. Meeting abstracts, MA2014-02(5), 367-367. Lien externe
Talebi-Esfandarani, M., & Savadogo, O. (2014). Synthesis and characterization of Pt-doped LiFePO₄/C composites using the sol-gel method as the cathode material in lithium-ion batteries. Journal of Applied Electrochemistry, 44(5), 555-562. Lien externe
Tavakoli Naeini, A., Lavertu, M., Buschmann, M. D., & Biniecki, K. (mai 2014). Large scale preparation of chitosan/nucleic acid nanoparticles using an automated inline mixing system [Résumé]. American Society of Gene & Cell Therapy 17th Annual Meeting, Washington, DC. Publié dans Molecular Therapy, 22. Disponible
Tavares, J. R. (mai 2014). Photochemical surface engineering to improve nanocomposite synthesis [Communication écrite]. 4th International Carbon Composites Conference (IC3 2014), Arcachon, France. Non disponible
Tazi, M., Erchiqui, F., Godard, F., Kaddami, H., & Ajji, A. (2014). Characterization of rheological and thermophysical properties of HDPE-wood composite. Journal of Applied Polymer Science, 131(13). Lien externe
Tebib, M., Samuel, A. M., Ajersch, F., & Chen, X.-G. (2014). Effect of P and Sr additions on the microstructure of hypereutectic Al-15Si-14Mg-4Cu alloy. Materials Characterization, 89, 112-123. Lien externe
Thalla, P. K., Fadlallah, H., Liberelle, B., Lequoy, P., De Crescenzo, G., Merhi, Y., & Lerouge, S. (2014). Chondroitin sulfate coatings display low platelet but high endothelial cell adhesive properties favorable for vascular implants. Biomacromolecules, 15(7), 2512-2520. Lien externe
Thibodeau, C., Monette, F., Bulle, C., & Glaus, M. (2014). Comparison of black water source-separation and conventional sanitation systems using life cycle assessment. Journal of Cleaner Production, 67, 45-57. Lien externe
Tsabet, È. (2014). De la particule au procédé : modélisation de la production d'émulsions de Pickering [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Vallee, C., Durocher, Y., & Henry, O. (2014). Exploiting the metabolism of PYC expressing HEK293 cells in fed-batch cultures. Journal of Biotechnology, 169(1), 63-70. Lien externe
Vandromme, N. (2014). Modélisation conséquentielle de la consommation d'énergie d'un groupe de serveurs générant un nuage informatique et attributionnelle des bénéfices de la virtualisation [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Veilleux, D., Lavertu, M., Biniecki, K., & Buschmann, M. D. (mai 2014). Lyophilized chitosan nanoparticles for pDNA and siRNA delivery: Physico-chemical properties, transfection efficiency, and cytotoxicity [Résumé]. American Society of Gene & Cell Therapy 17th Annual Meeting, Washington, DC. Publié dans Molecular Therapy, 22(S1). Disponible
Verea, L., Savadogo, O., Verde, A., Campos, J., Ginez, F., & Sebastian, P. J. (2014). Performance of a microbial electrolysis cell (MEC) for hydrogen production with a new process for the biofilm formation. International Journal of Hydrogen Energy, 39(17), 8938-8946. Lien externe
Virgilio, N. (janvier 2014). Science and engineering of interfaces to design soft materials including polymers, gels and colloids [Présentation]. Dans 9th CREPEC Annual Colloquium, Montréal, Québec. Non disponible
Vu, T. T. D., Mighri, F., Ajji, A., & Do, T.-O. (2014). Synthesis of titanium dioxide/cadmium sulfide nanosphere particles for photocatalyst applications. Industrial and Engineering Chemistry Research, 53(10), 3888-3897. Lien externe
Wang, J. (2014). Experimental and Thermodynamic Study on the Mg-X (X : Ag, Ca, In, Li, Na, Sn, Sr and Zn) Multicomponent Systems [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Wang, J., Han, J., Jung, I.-H., Bairos, D., & Chartrand, P. (2014). Thermodynamic optimizations on the binary Li-Sn system and ternary Mg-Sn-Li system. CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry, 47, 100-113. Lien externe
Wang, J., Hudon, P., Kevorkov, D., Chartrand, P., Jung, I.-H., & Medraj, M. (2014). Experimental and thermodynamic study of the Mg-Sn-In-Zn quaternary system. Journal of Alloys and Compounds, 588, 75-95. Lien externe
Wang, J., Hudon, P., Kevorkov, D., Chartrand, P., Jung, I.-H., & Medraj, M. (2014). Thermodynamic and experimental study of the Mg-Sn-Ag-In quaternary system. Journal of Phase Equilibria and Diffusion, 35(3), 284-313. Lien externe
Wang, J., Lessard, B. H., Maric, M., & Favis, B. D. (2014). Hierarchically porous polymeric materials from ternary polymer blends. Polymer (United Kingdom), 55(16), 3461-3467. Lien externe
Wang, X. (2014). Investigation on the Mixing Performance in a Superblend Coaxial Mixer [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Wang, X., Farhat, M., Fradette, L., & Tanguy, P. A. (2014). Analysis of power consumption in multishaft mixers. Industrial and Engineering Chemistry Research, 53(16), 6730-6737. Lien externe
Yan, P., Liu, Z., Zhang, S., Liu, D., Wang, X., Yue, S., & Zhao, Y. (2014). Observation of hole injection boost via two parallel paths in Pentacene thin-film transistors by employing Pentacene: 4, 4"-tris(3-methylphenylphenylamino) triphenylamine: MoO₃ buffer layer. APL Materials, 2(11), 116103 (7 pages). Disponible
Zohre Vand, A. (2014). Development of Polymer Nanocomposite Films and their Potential for Photovoltaic Cell Applications [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Zohrevand, A., Ajji, A., & Mighri, F. (2014). Microstructure and properties of porous nanocomposite films: Effects of composition and process parameters. Polymer International, 63(12), 2052-2060. Lien externe
Zohrevand, A., Ajji, A., & Mighri, F. (2014). Morphology and properties of highly filled iPP/TiO2 nanocomposites. Polymer Engineering and Science, 54(4), 874-886. Lien externe
Zohrevand, A., Ajji, A., & Mighri, F. (2014). Relationship between rheological and electrical percolation in a polymer nanocomposite with semiconductor inclusions. Rheologica Acta, 53(3), 235-254. Lien externe
Zolali, A. M., & Favis, B. D. (avril 2014). Morphology and physical properties of biodegradable multicomponent blends with polylactic acid [Communication écrite]. 72nd Annual Technical Conference of the Society of Plastics Engineers: The Plastics Conference (ANTEC 2014), Las Vegas, NV, United states. Lien externe
