<  Back to the Polytechnique Montréal portal

Items where Division is "Department of Mechanical Engineering"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors | Document subtype | No Grouping
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | R | S | T | U | V | W | Y | Z
Number of items: 119.

A

Abderrafai, Y., Diouf-Lewis, A., Sosa-Rey, F., Farahani, R. D., Piccirelli, N., Lévesque, M., & Therriault, D. (2023). Additive manufacturing and characterization of high temperature thermoplastic blends for potential aerospace applications. Composites Science and Technology, 231, 9 pages. External link

Alyaldin, L., & Mureithi, N. W. (2023). An analytical frequency response function for fluidelastic instability model of a normal triangular array in cross-flow. Journal of Sound and Vibration, 561, 117752 (15 pages). External link

Antar, E., & Robert, É. (2023). Thermodynamic analysis of novel methanol polygeneration systems for greenhouses. Biomass Conversion and Biorefinery, 13(9), 8033-8046. Available

Antar, E., Delavande, J., & Robert, É. (2023). Experimental characterization of diffusive-thermal instabilities in CO₂-diluted H₂―CH₄―CO unstrained diffusion flames. Combustion and Flame, 250, 112636 (32 pages). Restricted access

Arani, M. S., Bakhtiari, M., & Lakis, A. A. (2023). Analyzing softening and hardening behavior in vibration of a thin incompressible hyperelastic cylindrical shell. Thin-Walled Structures, 189, 110943 (14 pages). External link

Arefizadeh, S., Arefizadeh, S., Etesami, S. R., & Bolouki, S. (2023). Robustness of dynamics in games: A contraction mapping decomposition approach. Automatica, 155, 12 pages. External link

Arslan, D., Norton, E., Mihai, M., Lévesque, M./.T., & Therriault, D. (2023, May). High-temperature thermoplastic composites reinforced with recycled carbon fibers and thermal black for Fused Filament Fabrication [Presentation]. In Thirty-Eight Polymer Processing Society Conference (PPS-38), St.Gallen, Switzerland. Unavailable

Arslan, M., & Birglen, L. (2023, June). Design, control, and experiments of a low-cost open-source planar cable-driven parallel robot [Paper]. CCToMM Mechanisms, Machines and Mechatronics (M3) Symposium, Québec, Canada (15 pages). External link

Artz, T., Caru, M., Curnier, D., Abasq, M., Krajinovic, M., Laverdiere, C., Sinnett, D., & Périé-Curnier, D. (2023). Modelling cardiac mechanics in doxorubicin-induced cardiotoxicity following childhood acute lymphoblastic leukemia using a combination of cardiac magnetic resonance imaging, cardiopulmonary exercise testing and the CircAdapt model. Journal of Biomechanics, 154, 8 pages. External link

Assi, P., Achiche, S., & Laberge Lebel, L. (2023). Application of graph theory for detecting carriers' collisions in braiding machines. International Journal of Advanced Manufacturing Technology, 126(5-6), 2337-2348. External link

Assi, P., Achiche, S., & Laberge Lebel, L. (2023). Application of graph theory for preventing carriers' collisions in variable path braiding machines. International Journal of Advanced Manufacturing Technology, 126(9-10), 4581-4589. External link

B

Bastani, A., Nguyen, A., Eslami Nejad, P., & Badache, M. (2023). Numerical investigation of using a field of shallow boreholes with latent heat storage and solar injection in cold climates. Geothermics, 112, 11 pages. External link

Bastien, J., & Birglen, L. (2023). Power Efficient Design a Compliant Robotic Leg Based on Klann's Linkage. IEEE/ASME Transactions on Mechatronics, 28(2), 814-824. External link

Bédard, É., Ashok, V., Claveau-Mallet, D., Robert, É., & Silverwood, A. (2023, June). Impact of crossflow microsand filtration on particle removal in HVAC circuit [Paper]. ASHRAE annual Conference, Tampa, Florida. Unavailable

Ben Lassoued, M. A., Ross, A., & Michon, G. (2023). Vibration confinement and localization patterns in weakly coupled oscillators with parameter gradients. Journal of Sound and Vibration, 549, 117590 (11 pages). External link

Bilodeau-Bérubé, C. (2023). Effect of Surface Roughness on Aircraft Stall [Master's thesis, Polytechnique Montréal]. Restricted access

C

Caron, R., Séoud, L., Londono, I., & Villemure, I. (2023). Segmentation of trabecular bone microdamage in Xray microCT images using a two-step deep learning method. Journal of the Mechanical Behavior of Biomedical Materials, 137, 105540 (9 pages). External link

Caru, M., Curnier, D., Dubois, P., Friedrich, M. G., Andelfinger, G., Krajinovic, M., Laverdière, C., Sinnett, D., & Périé-Curnier, D. (2023). Cardiorespiratory Fitness and Cardiac Magnetic Resonance Imaging in Childhood Acute Lymphoblastic Leukemia Survivors. Journal of Physical Activity and Health, 20(6), 522-530. External link

Chakraborty, A., Muhammad, W., Masse, J.-P., Tangestani, R., Ghasri-Khouzani, M., Wessman, A., & Martin, É. (2023). Role of alloy composition on micro-cracking mechanisms in additively manufactured Ni-based superalloys. ACTA Materialia, 255, 16 pages. External link

Chakraborty, A., Tangestani, R., Esmati, K., Sabiston, T., Yuan, L., & Martin, É. (2023). Mitigating inherent micro-cracking in laser additively manufactured RENE 108 thin-wall components. Thin-Walled Structures, 184, 110514 (11 pages). External link

Chapuis, R. P., Duhaime, F., Weber, S., Marefat, V., Zhang, L., Blessent, D., Bouaanani, N., & Pelletier, D. (2023). Numerical convergence does not mean mathematical convergence: Examples of simple saturated steady-state groundwater models with pumping wells. Computers and Geotechnics, 162, 11 pages. External link

Chaudhuri, S., & Savard, B. (2023). Turbulent flame speed based on the mass flow rate: Theory and DNS. Combustion and Flame, 252, 7 pages. External link

Chauvette, J.-F., Hia, I. L., Farahani, R. D., Plante, R., Piccirelli, N., & Therriault, D. (2023). Non-planar multinozzle additive manufacturing of thermoset composite microscaffold networks. Composites Part B: Engineering, 256, 110627 (11 pages). External link

Chauvette, J.-F., Hia, I. L., Pierre, J., Chenier, G., Farahani, R. D., Piccirelli, N., & Therriault, D. (2023). Non-Planar Multiprocess Additive Manufacturing of Multifunctional Composites. Advanced Materials Technologies, 10 pages. External link

Constant, C., Aubin, C.-É., Kremers, H. M., Garcia, D. V. V., Wyles, C. C., Rouzrokh, P., & Larson, A. N. (2023). The use of deep learning in medical imaging to improve spine care: A scoping review of current literature and clinical applications. North American Spine Society Journal (NASSJ), 15, 14 pages. Available

Cossin, M., Ross, A., & Prince, F. (2023). A kinematic analysis of jumping technique in elite Korean teeterboard athletes: a case-study. Sports Biomechanics, 22(2), 246-254. External link

Costa-Baptista, J., Fotsing, E. R., Mardjono, J., Therriault, D., & Ross, A. (2023). Hybrid acoustic materials through assembly of tubes and microchannels: design and experimental investigation. Rapid Prototyping Journal. External link

D

Darwish, S., Mureithi, N. W., & Cho, M. (2023). In-plane fluidelastic instability study of a tube bundle with a rotated triangular layout and small pitch ratio. Nuclear Engineering and Design, 405, 112202 (15 pages). External link

Darwish, S., Mureithi, N. W., & Cho, M. (2023). Stability behaviour of a rotated square tube array subjected to two-phase cross-flow. Nuclear Engineering and Design, 406, 112235 (19 pages). External link

Darwish, S., Mureithi, N. W., Hadji, A., & Cho, M. (2023). Experimental investigation of fluidelastic instability of a rotated square array subjected to two-phase and air cross-flow. Nuclear Engineering and Design, 404, 112155 (13 pages). External link

Delhez, E., Nyssen, F., Golinval, J. C., & Batailly, A. (2023). Numerical study of bladed structures with geometric and contact nonlinearities. Journal of Sound and Vibration, 544, 117382 (27 pages). External link

Dreau, J., Magnain, B., & Batailly, A. (2023). Multi-element polynomial chaos expansion based on automatic discontinuity detection for nonlinear systems. Journal of Sound and Vibration, 567, 25 pages. External link

Dumas, B. (2023). High-Speed Diagnostic Tools Applied to the Study of New Hypergolic Hybrid Rocket Fuels [Master's thesis, Polytechnique Montréal]. Restricted access

Dumas, B., Jobin, O., Kaprolat, W., Zahlawi, J., & Robert, É. (2023). Ignition delay and performance of sorbitol based hypergolic hybrid fuels. Fuel, 349, 10 pages. External link

E

Eskandari, A. H., Ghezelbash, F., Shirazi-Adl, A., Gagnon, D., Mecheri, H., & Larivière, C. (2023). Validation of an EMG submaximal method to calibrate a novel dynamic EMG-driven musculoskeletal model of the trunk: Effects on model estimates. Journal of Electromyography and Kinesiology, 68, 102728 (9 pages). External link

F

Fan, L., Savard, B., Carlyle, S., Nozari, M., Naaman, R., Fond, B., & Vena, P. (2023). Simultaneous stereo-PIV and OHCH2O PLIF measurements in turbulent ultra lean CH4/H2 swirling wall-impinging flames. Proceedings of the Combustion Institute, 39(2), 2179-2188. External link

Farahani, R. D., Lévesque, M., & Therriault, D. (2023). Advanced manufacturing of composites for structural and acoustic applications. (Technical Report). Unavailable

Forte, A. E., Mélançon, D., Zanati, M., De Giorgi, M., & Bertoldi, K. (2023). Chiral mechanical metamaterials for tunable optical transmittance. Advanced Functional Materials, 33(20), 2214897 (7 pages). External link

G

Gad-el-Hak, I., Mureithi, N. W., & Karazis, K. (2023). Fluidelastic instability of a rod bundle subjected to jet cross-flow. Journal of Fluids and Structures, 119, 17 pages. External link

Gad-el-Hak, I., Mureithi, N. W., Karazis, K., & Williams, G. (2023). Jet cross-flow induced vibrations in rod bundles. Part I: Experimental apparatus and stream-wise vibration results. Nuclear Engineering and Design, 401, 15 pages. External link

Gad-el-Hak, I., Mureithi, N. W., Karazis, K., & Williams, G. (2023). Principal component analysis of vibration response of a rod bundle subjected to jet cross-flow. Journal of Sound and Vibration, 550, 117592 (25 pages). External link

Gamache, J.-F., Vadean, A., Capo, M., Rochefort-Beaudoin, T., Dodane, N., & Achiche, S. (2023). Complexity-driven layout exploration for aircraft structures. Design Science, 9, 34 pages. External link

Gao, W., Ibaraki, S., Donmez, M. A., Kono, D., Mayer, J. R. R., Chen, Y.-L., Szipka, K., Archenti, A., Linares, J.-M., & Suzuki, N. (2023). Machine tool calibration: Measurement, modeling, and compensation of machine tool errors. International Journal of Machine Tools and Manufacture, 187, 61 pages. External link

Gay, M., Wang, X., Ritzman, T., Floccari, L., Schwend, R. M., & Aubin, C.-É. (2023). Biomechanical analysis of rod contouring in posterior spinal instrumentation and fusion for 3D correction of adolescent idiopathic scoliosis. Spine Deformity, 8 pages. External link

Ghafarinatanzi, M., & Périé-Curnier, D. (2023). Estimation of anisotropic properties of CMR patient-specific left ventricle using the virtual field method. Biomechanics and Modeling in Mechanobiology, 16 pages. External link

Ghasri-Khouzani, M., Karimialavijeh, H., Pröbstle, M., Batmaz, R., Muhammad, W., Chakraborty, A., Sabiston, T. D., Harvey, J.-P., & Martin, É. (2023). Processability and characterization of A20X aluminum alloy fabricated by laser powder bed fusion. Materials Today Communications, 35, 105555 (14 pages). External link

Ghasri-Khouzani, M., Karimialavijeh, H., Tangestani, R., Probstle, M., & Martin, É. (2023). Single-track study of A20X aluminum alloy fabricated by laser powder bed fusion: Modeling and experiments. Optics & Laser Technology, 162, 10 pages. External link

Ghazi Hesami, S. (2023). Aerothermal Characteristics of Ribbed Surfaces at High Reynolds Number [Ph.D. thesis, Polytechnique Montréal]. Restricted access

Guy, A., & Aubin, C.-É. (2023). Finite element simulation of growth modulation during brace treatment of adolescent idiopathic scoliosis. Journal of Orthopaedic Research, 10 pages. External link

H

Hassan, A., Bagu, E. T., Patten, S. A., Molidperee, S., Parent, S., Barchi, S., Villemure, I., Tremblay, A., & Moldovan, F. (2023). Differential Regulation of POC5 by ER alpha in Human Normal and Scoliotic Cells. Genes, 14(5), 1111 (21 pages). External link

Hébert, A., & Naceur, A. (2022, July). Implementation of the ELECTR module in NJOY [Paper]. 15th Internatioinal Conference on Nuclear Data for Science and Technology (ND 2022) (4 pages). Published in EPJ Web of Conferences, 284. External link

Herbinger, F., Vandenhof, C., & Kummert, M. (2023). Building energy model calibration using a surrogate neural network. Energy and Buildings, 289, 15 pages. External link

Hia, I. L., Snyder, A. D., Turicek, J. S., Blanc, F., Patrick, J. F., & Therriault, D. (2023). Electrically conductive and 3D-printable copolymer/MWCNT nanocomposites for strain sensing. Composites Science and Technology, 232, 109850 (10 pages). External link

Horriche, Z., Étienne, S., Béguin, C., & Brosset, L. Numerical Study of the Influence of Weber and Reynolds Numbers on Global Wave Shapes Before Impact [Paper]. 33rd International Ocean and Polar Engineering Conference (ISOTOPE 2023), Ottawa, ON, Canada. Unavailable

I

Im, S., Batmaz, R., Natarajan, A., & Martin, É. (2023, March). Compatibility Study of Polymeric Binders for Aluminum Binder Jet Parts [Paper]. Light Metals Symposium held at the TMS Annual Meeting and Exhibition (TMS 2023), San Diego, CA, USA. External link

Im, S., Ghasri-Khouzani, M., Muhammad, W., Batmaz, R., Esmati, K., Chakraborty, A., Natarajan, A., & Martin, É. (2023). Evaluation of Different Sintering Agents for Binder Jetting of Aluminum Alloy. Journal of Materials Engineering and Performance, 11 pages. External link

J

Jadayel, M., & Khameneifar, F. (2023, May). A novel setup for in-process geometric inspection of 3D printed parts via structured-light 3D scanning [Paper]. International Congress of the Canadian Society of Mechanical Engineering (CSME 2023), Sherbrooke, QC, Canada. Unavailable

Jadayel, M., & Khameneifar, F. (2023, July). Structured-light 3D scanning performance in offline and in-process measurement of 3D printed parts [Paper]. 17th CIRP Conference on Intelligent Computation in Manufacturing Engineering (CIRP ICME 2023), Gulf of Naples, Italy. Unavailable

Jobin, O., Dumas, B., Zahlawi, J., Chartray-Pronovost, M., & Robert, É. (2023). Hypergolic ignition of paraffin-based hybrid rocket fuels by sprays of liquid oxidizer. Proceedings of the Combustion Institute, 39(4), 5073-5082. External link

K

Karimialavijeh, H., Ghasri-Khouzani, M., Chakraborty, A., Harvey, J.-P., & Martin, É. (2023, March). Comparison of Additively Manufactured and Cast Aluminum A205 Alloy [Paper]. Light Metals Symposium held at the TMS Annual Meeting and Exhibition (TMS 2023), San Diego, CA, USA. External link

Karimialavijeh, H., Ghasri-Khouzani, M., Das, A., Proebstle, M., & Martin, É. (2023). Effect of laser contour scan parameters on fatigue performance of A20X fabricated by laser powder bed fusion. International Journal of Fatigue, 175, 13 pages. External link

Khalfi, B., Nasraoui, M. T., Chakhari, J., Ross, A., & Chafra, M. (2023). Dynamic behavior of cylindrical shell with partial constrained viscoelastic layer damping under an impact load. Acta Mechanica, 19 pages. External link

Kimiaei, S., Kazemi-Ranjbar, S., & Eslami Nejad, P. (2023). Grid-friendly ground source heat pump configurations to reduce the peak power demand of conventional electric-based heating systems. Energy and Buildings, 290, 113084 (14 pages). External link

Kojtych, S., Nyssen, F., Audet, C., & Batailly, A. (2023). Methodology for the Redesign of Compressor Blades Undergoing Nonlinear Structural Interactions: Application to Blade-tip/casing Contacts. Journal of Engineering for Gas Turbines and Power, 145(5), 39 pages. External link

Kooshkaki, A. R., Bolouki, S., Etesami, S. R., & Mohebbi, A. (2023). Partisan Confidence Model for Group Polarization. IEEE Transactions on Network Science and Engineering, 13 pages. External link

L

Lampron, O., Lingua, A., Therriault, D., & Lévesque, M. (2023). Characterization of the non-isotropic tensile and fracture behavior of unidirectional polylactic acid parts manufactured by material extrusion. Additive Manufacturing, 61, 103369 (12 pages). External link

Latulippe, M., Khameneifar, F., & Mayer, J. R. R. (2023, May). Correction of the systematic errors of 3D scanner measurements by data fusion with CMM data [Paper]. International Congress of the Canadian Society of Mechanical Engineering (CSME 2023), Sherbrooke, QC, Canada. Unavailable

Le Gentil, T., Therriault, D., & Kerbrat, O. (2023). A comprehensive methodology to support decision-making for additive manufacturing of short carbon-fiber reinforced polyamide 12 from energy, cost and mechanical perspectives. International Journal of Advanced Manufacturing Technology, 12 pages. External link

Leblond-Ménard, C. (2023). Assistive Robotic arm control using point of gaze Estimation [Ph.D. thesis, Polytechnique Montréal]. Restricted access

Leblond-Menard, C., & Achiche, S. (2023). Non-Intrusive Real Time Eye Tracking Using Facial Alignment for Assistive Technologies. IEEE Transactions on Neural Systems and Rehabilitation Engineering, 31, 954-961. External link

Li, X., Liu, Y., Li, L., Huo, R., Ghezelbash, F., Ma, Z., Bao, G., Liu, S., Yang, Z., Weber, M. H., Li-Jessen, N. Y. K., Haglund, L., & Li, J. (2023). Tissue-mimetic hybrid bioadhesives for intervertebral disc repair. Materials Horizons, 10(5), 1705-1718. External link

Lin, Y., Cheng, A., Pirie, J., Davidson, J., Levy, A., Matava, C., Aubin, C.-É., Robert, E., Buyck, M., Hecker, K., Gravel, G., & Chang, T. P. (2023). Quantifying Simulated Contamination Deposition on Healthcare Providers Using Image Analysis. Simulation in Healthcare, 18(3), 207-213. External link

Lingua, A., Sosa-Rey, F., Pautard, S., Therriault, D., & Lévesque, M. (2023). Multiscale characterization of the fracture mechanics of additively manufactured short fiber-reinforced composites. Engineering Fracture Mechanics, 289, 19 pages. External link

Linguori, V., Moens, F., Peter, J., & Laurendeau, É. (2023, March). Aircraft fuselage effects on transonic wing pressure via non-linear vortex lattce method [Paper]. 57th 3AF International Conference on Applied aerodynamics, Bordeaux, France (10 pages). Unavailable

Lopez Poncelas, M., La Barbera, L., Rawlinson, J. J., Polly, D. W., & Aubin, C.-É. (2023). Influence of spinal lordosis correction location on proximal junctional failure: a biomechanical study. Spine Deformity, 11, 49-58. External link

Lopez Poncelas, M., La Barbera, L., Rawlinson, J., Crandall, D., & Aubin, C.-É. (2023). Proximal junctional failure after surgical instrumentation in adult spinal deformity: biomechanical assessment of proximal instrumentation stiffness. Spine Deformity, 11, 59-69. External link

M

Maghami, A., Imbert, A., Côté, G., Monsarrat, B., Birglen, L., & Khoshdarregi, M. (2023). Calibration of Multi-Robot Cooperative Systems Using Deep Neural Networks. Journal of Intelligent & Robotic Systems, 107(4), 14 pages. External link

Mahecha Capacho, D. R., Beaudry, C., Aubin, C.-É., & Armellini, F. (2023, May). De la gestion des idées innovantes à la norme ISO 56000 [Presentation]. In 90e congrès de l'ACFAS, Montreal, Qc, Canada. Unavailable

Malfajani, R. S., Niknam, H., Bodkhe, S., Therriault, D., Laurin, J.-J., & Sharawi, M. S. (2023). A 3D-printed Encapsulated Dual Wide-Band Dielectric Resonator Antenna with Beam Switching Capability. IEEE Open Journal of Antennas and Propagation, 4, 492-505. External link

Malfajani, R. S., Niknam, H., Bodkhe, S., Therriault, D., Laurin, J.-J., & Sharawi, M. S. (2023). A Dual Wide-Band Mushroom-Shaped Dielectric Antenna for 5G Sub-6-GHz and mm-Wave Bands. IEEE Open Journal of Antennas and Propagation, 4, 614-625. Available

Malfajani, R. S., Niknam, H., Bodkhe, S., Therriault, D., Laurin, J.-J., & Sharawi, M. S. (2023). A Dual Wide-Band Mushroom-Shaped Dielectric Antenna for 5G Sub-6-GHz and mm-Wave Bands. IEEE Open Journal of Antennas and Propagation, 4, 614-625. Available

Marousi, M., Rimpault, X., Turenne, S., & Balazinski, M. (2023). Initial tool wear and process monitoring during titanium metal matrix composite machining (TiMMC). Journal of Manufacturing Processes, 86, 208-220. External link

Martin, S., Cobetto, N., Larson, A. N., & Aubin, C.-É. (2023). Biomechanical modeling and assessment of lumbar vertebral body tethering configurations. Spine Deformity, 11(5), 1041-1048. External link

Meskoob, B., Brovar, Y., Menshenin, Y., Blanchard, F., & Fortin, C. (2023, April). Interface Management for Telecommunication System Design through OPM and DSM-based Approaches [Paper]. IEEE International Systems Conference (SysCon 2023), Vancouver, BC, Canada (8 pages). External link

Moeini, M., Yue, L., Begon, M., & Lévesque, M. (2023). Surrogate optimization of a lattice foot orthotic. Computers in Biology and Medicine, 155, 106376 (20 pages). External link

N

Naceur, A., Hébert, A., Romano, P., Forget, B., Chilian, C., & Carrier, J.-F. (2023). Feasibility of a multigroup Boltzmann-Fokker-Planck solution for electron beam dose calculations. Scientific Reports, 13(1), 1310 (21 pages). External link

Namvar, M., & Leclaire, S. (2023). LaBCof: Lattice Boltzmann boundary condition framework. Computer Physics Communications, 285, 108647 (20 pages). External link

Ngoc, H. V., Mayer, J. R. R., & Bitar-Nehme, E. (2023). Deep Learning to Directly Predict Compensation Values of Thermally Induced Volumetric Errors. Machines, 11(4), 16 pages. External link

Ning, B., Mustafy, T., Londono, I., Laporte, C., & Villemure, I. (2023). Impact loading intensifies cortical bone (re)modeling and alters longitudinal bone growth of pubertal rats. Biomechanics and Modeling in Mechanobiology, 22, 1145-1162. External link

O

Ouadday, R., Abusrea, M., Boukhili, R., & Vadean, A. (2023). Modeling of the effect of ATH fillers on the rheology, curing kinetics, and flexural properties of the epoxy resin forming the hydraulic turbines' stay vanes extension. Mechanics of Advanced Materials and Structures, 15 pages. External link

P

Papillon Laroche, H., Radenac, E., & Laurendeau, É. (2023). Stochastic ice accretion model using an unstructured advancing front technique. International Journal of Multiphase Flow, 163, 104420 (18 pages). External link

Paques, M., Changeux, B., Das, A., Miao, H., Lévesque, M., Turenne, S., & Martin, É. (2023, March). Effect of the Vibratory Peening Parameters on Surface Properties of Ti-6Al-4V [Paper]. 152nd Annual Meeting and Exhibition of The Minerals, Metals and Materials Society (TMS 2023), San Diego, CA, USA. External link

Paques, M., Hong Yan, M., Benoit, C., Sylvain, T., Jawad, B., & Etienne, M. (2023). Investigation on the Relationship Between the Vibratory Peening Process Parameters and Almen Intensity. Journal of Machine Engineering. External link

Pelzmann, T., Dupont, F., Saute, B., & Robert, É. (2023). Two-color pyrometry for backface temperature and emissivity measurement of burning materials. International Journal of Thermal Sciences, 184, 107894 (14 pages). External link

Perron, M. (2023). Heating of Greenhouses from Biomass Polygeneration Systems [Master's thesis, Polytechnique Montréal]. Restricted access

Pierre, J., Iervolino, F., Farahani, R. D., Piccirelli, N., Lévesque, M., & Therriault, D. (2023). Material extrusion additive manufacturing of multifunctional sandwich panels with load-bearing and acoustic capabilities for aerospace applications. Additive Manufacturing, 61, 10 pages. External link

Poveda-Hospital, S., Peter, Y.-A., & Quesada, N. (2023). Custom nonlinearity profile for integrated quantum light sources. Physical Review Applied, 19(5), 054033 (9 pages). Restricted access

R

Ramirez, V., Ghezelbash, F., Shirazi-Adl, A., & Bazrgari, B. (2023). Trunk muscle forces and spinal loads during heavy deadlift: Effects of personalization, muscle wrapping, muscle lever arm, and lumbopelvic rhythm. International Journal for Numerical Methods in Biomedical Engineering, e3680 (11 pages). External link

Rochefort-Beaudoin, T., Vadean, A., Gamache, J.-F., & Achiche, S. (2023). Supervised deep learning for the moving morphable components topology optimization framework. Engineering Applications of Artificial Intelligence, 123, 15 pages. External link

S

Sadallah, A., Changeux, B., Miao, H.-Y., Das, A., Turenne, S., & Martin, É. (2023, March). Experimental Investigation of the Effect of High-Temperature Shot Peening on the Surface Integrity of 7010-T7452 Aluminum Alloy [Paper]. Light Metals Symposium held at the TMS Annual Meeting and Exhibition (TMS 2023), San Diego, CA, USA. External link

Samadi, B., Raison, M., Mahaudens, P., Detrembleur, C., & Achiche, S. (2023). A preliminary study in classification of the severity of spine deformation in adolescents with lumbar/thoracolumbar idiopathic scoliosis using machine learning algorithms based on lumbosacral joint efforts during gait. Computer Methods in Biomechanics and Biomedical Engineering, 26(11), 1341-1352. External link

Santonja Soto, F. (2023). Characterization of Specimens 3D Printed by Fused Filament Fabrication Using Advanced Thermoplastic Composites Developed for Aerospace Applications [Master's thesis, Polytechnique Montréal]. Restricted access

Schenke, S., Sewerin, F., van Wachem, B., & Denner, F. (2023). Amplitude modulation of acoustic waves in accelerating flows quantified using acoustic black and white hole analogues. The Journal of the Acoustical Society of America, 154(2), 781-791. External link

Serbescu, A., Brassard, D., Langot, J., Gourcerol, E., Chizari, K., Desautels, A., Lapalme, M., Sirois, F., & Therriault, D. (2023). Silver-based conductive coatings as lightning strike protection for composite aircraft. Results in Materials, 19, 10 pages. Available

Solorzano Barrera, C., Villemure, I., & Aubin, C.-É. (2023). A novel methodology to estimate bone mechanical properties using dual-energy imaging to improve pedicle screw fixation. Journal of Musculoskeletal and Neuronal Interact, 23(3), 316-327. Available

Sosa-Rey, F., Lingua, A., Piccirelli, N., Therriault, D., & Lévesque, M. (2023). Thermo-viscoelastic multiscale homogenization of additively manufactured short fiber reinforced polymers from direct microstructure characterization. International Journal of Solids and Structures, 281, 13 pages. External link

Succar, A., Lefebvre, X., Prévost, M., Bédard, É., & Robert, É. (2023). Characterization of the aerosol produced from an aerated jet. Water Research, 229, 119432 (15 pages). External link

Sushitskii, V., van Rees, W. M., Lévesque, M., & Gosselin, F. (2023). Determination of Optimal Shot Peen Forming Patterns Using the Theory of Non-Euclidean Plates. Journal of Manufacturing Science and Engineering-Transactions of the Asme, 145(3), 031006 (15 pages). External link

T

Testoni, O., Bodkhe, S., Bergamini, A., & Ermanni, P. (2023). Network of selectively compliant actuators based on shape memory alloys and polymers for a reconfigurable sandwich panel. Journal of Intelligent Material Systems and Structures, 34(3), 341-351. External link

Trofimov, A., Ravey, C., Droz, N., Therriault, D., & Lévesque, M. (2023). A review on the Representative Volume Element-based multi-scale simulation of 3D woven high performance thermoset composites manufactured using resin transfer molding process. Composites Part A: Applied Science and Manufacturing, 169, 107499 (17 pages). Restricted access

Trofimov, A., Tuloup, C., Le Pavic, J., Ravey, C., Therriault, D., & Lévesque, M. (2023). Multi-scale modeling of process-induced pressure distribution inside 3D woven composites manufactured using Resin Transfer Molding. Composites Part a-Applied Science and Manufacturing, 165, 107307 (15 pages). External link

U

Uwase, E., Caru, M., Curnier, D., Meng, M. A., Andelfinger, G., Krajinovic, M., Laverdiere, C., Sinnett, D., & Périé-Curnier, D. (2023). Cardiac Mechanical Performance Assessment at Different Levels of Exercise in Childhood Acute Lymphoblastic Leukemia Survivors. Journal of Pediatric Hematology Oncology, 45(5), 247-255. External link

V

Vadcard, T. (2023). Dynamique non linéaire des systèmes mécaniques avec interfaces de contact : application aux interactions aube/carter [Ph.D. thesis, Polytechnique Montréal]. Restricted access

W

Wang, X., Schwend, R. M., Ritzman, T., Floccari, L., & Aubin, C.-É. (2023). Concave rod first vs. convex rod first in AIS instrumentation with differential rod contouring: computer modeling and simulations based on ten AIS surgical cases. Spine Deformity, 8 pages. External link

Wawrzyniak, N. (2023). Comportement mécanique monotone et cyclique d'éprouvettes de section millimétrique mises en forme par fusion laser sur lit de poudre [Ph.D. thesis, Polytechnique Montréal]. Restricted access

Wawrzyniak, N., Provencher, P. R., Brochu, M., & Brochu, M. (2023). Tensile properties of SS316L produced by LPBF: Influence of specimen dimensions and surface condition. Materials Characterization, 203, 11 pages. External link

Y

Yan Miao, H., Levesque, M., & Gosselin, F. (2023). Eigenstrain-based analysis of why uniformly shot peened aluminium plates bend more in the rolling direction. Strain, 22 pages. External link

Yang, B., Sun, Y., Trochu, F., Béguin, C., Wang, J., & Causse, P. (2023). Performance Evaluation of Unidirectional Molds used for Measuring Saturated Transverse Permeability of Engineering Textiles. Composites Part A: Applied Science and Manufacturing, 169, 107524 (33 pages). External link

Z

Zeinaly, Z., Sojoodi, M., & Bolouki, S. (2023). A Resilient Intelligent Traffic Signal Control Scheme for Accident Scenario at Intersections via Deep Reinforcement Learning. Sustainability, 15(2), 26 pages. External link

List generated on: Thu Sep 21 08:21:07 2023 EDT