 | Monter d'un niveau |
Aït-Ouali, A., Brebner, J. L., Yip, R. Y. F., & Masut, R. A. (1999). Analysis of the Stokes shift in InAsP/InP and InGaP/InP multiple quantum wells. Journal of Applied Physics, 86(12), 6803-6809. Lien externe
Allaire, C. (janvier 1999). Les matériaux réfractaires pour le confinement de l'aluminium liquide [Communication écrite]. Symposium sur la coulée de l'aluminium. Non disponible
Allaire, C., & Guermazi, M. (1999). Corrosion of furnace refractories by molten aluminum. Aluminum Transactions, 1(1), 163-170. Non disponible
Allaire, C., & Guermazi, M. (août 1999). New method for testing refractories for resistant to corundum attack [Communication écrite]. International Symposium on Advances in Refractories for the Metallurgical Industries III, Québec City, Québec, Canada. Non disponible
Allaire, C., & Guermazi, M. (août 1999). Protecting refractories against corundum growth in aluminum treatment furnaces (abstract only) [Communication écrite]. International Symposium on Advances in Refractories for the Metallurgical Industries III, Québec City, Québec, Canada. Lien externe
Bahti, F., Daxhelet, X., Shou, Y., Sansonetti, P., & Lacroix, S. (février 1999). UV grating/Mach-Zehnder OADM in photosensitive fibre for cladding mode suppression [Communication écrite]. Optical Fiber Communication, San Diego, CA, USA. Lien externe
Bailon, J.-P., & Tong, Z.-X. (juin 1999). Mechanisms of fatigue crack propagation in an aluminum matrix composite [Communication écrite]. Fatigue '99: Seventh International Fatigue Congress, Beijing, China. Non disponible
Bakhti, F., Bruyere, F., Daxhelet, X., Shou, X., Da Loura, J., Lacroix, S., & Sansonetti, P. (1999). Grating-Assisted Mach-Zehnder Oadm Using Photosensitive- Cladding Fibre for Cladding Mode Coupling Reduction. Electronics Letters, 35(12), 1013-1014. Lien externe
Bakhti, F., Bruyère, F., Daxhelet, X., Shou, X., Da Loura, J., Lacroix, S., & Sansonetti, P. (janvier 1999). Low short-wavelength losses Grating-assisted Mach-Zehnder OADM [Communication écrite]. Wavelength Division Multiplexing Components (WDM 1999), Washington, DC, USA. Lien externe
Bakhti, F., Daxhelet, X., Shou, X., Bruyere, F., Da Loura, J., Sansonetti, P., & Lacroix, S. (février 1999). Grating-assisted Mach-Zehnder OADM using cladding-photosensitive fibre for cladding mode suppression [Communication écrite]. Optical Fiber Communication Conference and the International Conference on Integrated Optics and Optical Fiber Communication (OFC/IOOC 1999), San Diego, CA, USA. Lien externe
Baril, E. (1999). Étude de la cinétique de formation et du bris de l'inhibition des réactions FE/ZN lors de la production de revêtements galvanisés et galvanisés-alliés [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Baril, E., & L'Espérance, G. (1999). Studies of the morphology of the al-rich interfacial layer formed during the hot dip galvanizing of steel sheet. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, 30(3A), 681-695. Lien externe
Baudson, H., Debucquoy, F., Huger, M., Gault, C., & Rigaud, M. (1999). Ultrasonic measurement of young's modulus MgO/C refractories at high temperature. Journal of the European Ceramic Society, 19(10), 1895-1901. Lien externe
Beaudoin, F., Simard-Normandin, M., & Meunier, M. (juin 1997). Metallic contamination from wafer handling [Communication écrite]. Advanced Workshop on Silicon Recombination Lifetime Characterization Methods, Santa Clara, CA, USA. Lien externe
Berechid, D., Larouche, D., Bailon, J.-P., & Dickson, J. I. (juin 1999). Mechanisms of Fatigue Crack Propagation in an Aluminium Matrix Composite [Communication écrite]. 7th International Fatigue Congress (FATIGUE 1999), Beijing, China. Non disponible
Blais, C., L'Espérance, G., & Evans, G. M. (1999). Characterisation of Inclusions Found in C-Mn Steel Welds Containing Titanium. Science and Technology of Welding and Joining, 4(3), 143-150. Lien externe
Blais, C., L'Espérance, G., & Miele, P. (mai 1999). Experimental evaluation of the reducibility of oxide particles found in powders and P/M parts [Communication écrite]. International Conference and Exhibition on Powder Metallurgy and Particulate Materials, Las Vegas, NV, USA. Non disponible
Boughaba, S., Héroux, J. B., Curcio, M., Sacher, E., & Meunier, M. (janvier 1999). Removal of surface contaminants with laser-based cleaning technology [Communication écrite]. Particles on Surfaces 5 and 6: Adhesion Removal VSP, Netherlands. Non disponible
Boyer, N. (1999). Évaluation des performances de l'imagerie thermique par fluorescence pour l'analyse de défaillance des flip chips [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Boyer, N., Masson, D. P., Meunier, M., & Simard-Normandin, M. (mars 1999). FMI applied to the study of the temperature distribution in flip chips [Communication écrite]. 15th IEEE Semiconductor Thermal Measurement and Management Symposium (SEMI-THERM 1999), San Diego, CA, USA. Lien externe
Breschi, L., Gobbi, P., Mazzotti, G., Ellis, T. H., Sacher, E., & Stangel, I. (1999). Field Emission in-Lens Sem Study of Enamel and Dentin. Journal of Biomedical Materials Research, 46(3), 315-323. Lien externe
Britel, M., Ménard, D., Ciureanu, P., Yelon, A., Rouabhi, M., Cochrane, R. W., Akyel, C., & Gauthier, J. (1999). Analysis of the complex permeability of a ferromagnetic wire. Journal of Applied Physics, 85(8), 5456-5458. Lien externe
Brochu, M. (1999). Modélisation de l'écoulement des poudres métalliques par l'introduction de paramètres microstructuraux [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Brodusch, L. (1999). Mise en oeuvre d'une sonde à hydrogène dans le cuivre liquide à l'usine de coulée continue d'alcatel [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Bureau, M. N., Di Francesco, E., Denault, J., & Dickson, J. I. (octobre 1997). Mechanical behavior of injection-molded polystyrene/polyethylene blends: fracture toughness versus fatigue crack propagation [Communication écrite]. Conference on Polymer Blends, Alloys and Filled Systems (Polyblends - 97), Boucherville, Québec. Publié dans Polymer engineering and science, 39(6). Lien externe
Bureau, M. N., El Kadi, H., Denault, J., Dickson, J. I., & Frechinet, S. (1999). Processing-structure-property relations in PS/PE blends: Compression versus injection molding. Dans Behnam, P. (édit.), Imaging and Image Analysis Applications for Plastics (p. 145-154). Lien externe
Bures, J., & Ghosh, R. (1999). Power Density of the Evanescent Field in the Vicinity of a Tapered Fiber. Journal of the Optical Society of America A: Optics Image Science and Vision, 16(8), 1992-1996. Lien externe
Champagne, A., Maciejko, R., Adams, D. M., Pakulski, G., Takasaki, B., & Makino, T. (1999). Global and Local Effects in Gain-Coupled Multiple-Quantum-Well Dfb Lasers. IEEE Journal of Quantum Electronics, 35(10), 1390-1401. Lien externe
Chartrand, P., & Pelton, A. (1999). Modeling the Charge Compensation Effect in Silica-Rich Na₂O- K₂O-Al₂O₃-SiO₂ Melts. Calphad-Computer Coupling of Phase Diagrams and Thermochemistry, 23(2), 219-230. Lien externe
Chen, W. C., Hamel, L.-A., Kemp, M., & Yelon, A. (1999). Modelling of Drift Mobility Experiments on a-Si:H. MRS Proceedings, 557, 433-438. Lien externe
Chiriac, H., Ovari, T. A., Marinescu, C. S., Ménard, D., & Ciureanu, P. (1999). Comparative Study of the Magnetic Behavior of Co-Rich Amorphous Fibers and Amorphous Glass-Covered Wires. Journal of Magnetism and Magnetic Materials, 197, 159-161. Lien externe
Ciureanu, P., Akyel, C., Britel, M. R., Ménard, D., Melo, L. G. C., Yelon, A., Valenzuela, R., & Rudkowski, P. Study of the complex permeability of amorphous wires using microwave impedance spectroscopy [Communication écrite]. Asia-Pacific Microwave Conference, APMC, Singapore. Lien externe
Ciureanu, P., Britel, M. R., Ménard, D., Akyel, C., Yelon, A., Rouabhi, M., & Cochrane, R. W. (1999). Anisotropic behaviour of permalloy wires using the giant magnetoimpedance effect. Journal of Magnetism and Magnetic Materials, 196-197, 391-393. Lien externe
Cormier, L. M., Ma, F., Bah, S. T., Guetre, S., Meunier, M., Paleologou, M., & Yelon, A. (mai 1999). Novel NASICON-polymer composite membrane for electrically driven processes: effect of ceramic thickness on current efficiency [Communication écrite]. Solid-State Ionic Devices Symposium, Seattle, WA, USA. Lien externe
Cova, P., Singh, A., & Masut, R. A. (1999). Simultaneous Analysis of Current-Voltage and Capacitance- Voltage Characteristics of Metal-Insulator-Semiconductor Diodes With a High Mid-Gap Trap Density. Journal of Applied Physics, 85(9), 6530-6538. Lien externe
Currie, J. F., & Sundararaman, C. S. (1999). Field effect devices. (Brevet no US5986291). Lien externe
Currie, J. F., Essalik, A., & Marusic, J. C. (1999). Micromachined Thin Film Solid State Electrochemical CO₂, NO₂ and SO₂ Gas Sensors. Sensors and Actuators. B, Chemical, 59(2-3), 235-241. Lien externe
Czeremuszkin, G., Wertheimer, M. R., Cerny, J., Sapieha, J.-E., & Martinu, L. (avril 1996). Plasma-Deposited Coatings for the Protection of Spacecraft Materials Against Atomic Oxygen Erosion [Communication écrite]. 3rd International Space Conference on "Protection of Materials and Structures from the Low Earth Orbit Space Environment" (ICPMSE-3), Toronto, Canada. Lien externe
Da Silva Sobrinho, A. S. (1999). Dépôt de composés inorganiques du Si par plasma CVD sur substrats polymériques : caractérisation structurale et fonctionnelle [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
da Silva Sobrinho, A. S., Czeremuszkin, G., Latreche, M., & Wertheimer, M. R. Detection and characterization of defects in transparent barrier coatings [Communication écrite]. Annual Technical Conference - Society of Vacuum Coaters. Lien externe
Da Silva Sobrinho, A. S., Czeremuszkin, G., Latrèche, M., & Wertheimer, M. R. (novembre 1998). Study of defect numbers and distributions in PECVD SIO//2 transparent barrier coatings on pet [Communication écrite]. 1998 MRS Fall Meeting: Symposium on Plasma Deposition and Treatment of Polymers, Boston, MA. Publié dans Materials Research Society Symposium - Proceedings, 544. Lien externe
Da Silva Sobrinho, A. S., Czeremuszkin, G., Latrèche, M., Dennler, G., & Wertheimer, M. R. (septembre 1998). A study of defects in ultra-thin transparent coatings on polymers [Communication écrite]. 6th International Conference on Plasma Surface Engineering (PSE-98), Garmisch-Partenkirchen, Germany. Publié dans Surface & coatings technology, 116-119. Lien externe
Dahl, S. (1999). Caractérisation des propriétés mécaniques de couches minces déposées par plasma et de surfaces polymériques traitées par plasma [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Dahl, S., & Sapieha, J.-E. (novembre 1998). Nano-scale mechanical characterization of plasma treated polymer surfaces [Communication écrite]. 1998 MRS Fall Meeting: Symposium on Plasma Deposition and Treatment of Polymers, Boston, MA. Publié dans Materials Research Society Symposium - Proceedings, 544. Lien externe
Dahl, S., Rats, D., Von Stebut, J., Martinu, L., & Sapieha, J.-E. (1999). Micromechanical Characterisation of Plasma Treated Polymer Surfaces. Thin Solid Films, 356, 290-294. Lien externe
Dalacu, D., & Martinu, L. (1999). Spectroellipsometric Characterization of Plasma-Deposited Au Fluoropolymer Nanocomposite Films. Journal of vacuum science and technology. A, Vacuum, surfaces, and films, 17(3), 877-883. Lien externe
Dalacu, D., Brown, A. C., Sapieha, J.-E., Martinu, L., Wertheimer, M. R., Najafi, S. I., & Andrews, M. A. (novembre 1998). Characterization of plasma-deposited Au/fluoropolymer nanocomposite films for nonlinear optical application [Communication écrite]. 1998 MRS Fall Meeting: Symposium on Plasma Deposition and Treatment of Polymers, Boston, MA. Publié dans Materials Research Society Symposium - Proceedings, 544. Lien externe
Decterov, S., & Pelton, A. (1999). A Thermodynamic Database for Copper Smelting and Converting. Metallurgical and Materials Transactions. B, Process Metallurgy and Materials Processing Science, 30(4), 661-669. Lien externe
Decterov, S., & Pelton, A. (1999). Thermodynamic Modeling of Lead Distribution Among Matte, Slag, and Liquid Copper. Metallurgical and Materials Transactions. B, Process Metallurgy and Materials Processing Science, 30(6), 1033-1044. Lien externe
Decterov, S., Pelton, A., & Zamalloa, M. (octobre 1999). Databases and software for thermodynamic simulation of copper smelting and converting [Communication écrite]. Copper 99-Cobre 99 International Conference. Fourth International Conference, Phoenix, USA. Lien externe
Desjardins, P., Spila, T., Gürdal, O., Taylor, N., & Greene, J. E. (1999). Hybrid surface roughening modes during low-temperature heteroepitaxy: Growth of fully-strained metastable Ge₁₋ₓSnₓ alloys on Ge(001)2*1. Physical review. B, Condensed matter, 60(23), 15933-15998. Lien externe
Dionne, M., L'Espérance, G., & Mirtchi, A. (février 1999). Caractérisation de la mouillabilité d'un matériau composite TiB₂-Carbone, Aluminium [Wetting of TiB2-Carbon Material Composite]. [Communication écrite]. 128th TMS Annual Meeting 'Light Metals 1999', San Diego, CA. Publié dans Light Metals: Proceedings of Sessions, TMS Annual Meeting, 5(1). Lien externe
Duchesne, E., L'Espérance, G., & Forget, C. (1999). Development of an automatic procedure based on microhardness to identify martensite, bainite and pearlite in sinter hardened parts. Advances in powder metallurgy and particulate materials, 3, 12.151-12.164-12.151-12.164. Non disponible
Feng, C., & Rigaud, M. (août 1999). Melting behavior and performance of mold powders for continuous casting [Communication écrite]. 3rd International Symposium on Advances in Refractories for the Metallurgical Industries, Québec City, Québec, Canada. Non disponible
Fozza, A. C. (1999). Spectroscopie d'émission vuv-visible provenant de plasmas basse pression : applications aux traitements de surfaces polymériques [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Fozza, A. C., Sapieha, J.-E., & Wertheimer, M. R. (1999). Vacuum ultraviolet irradiation of polymers. Plasmas and Polymers, 4(2-3), 183-206. Lien externe
Fricoteaux, P., & Savadogo, O. (1999). Electrocatalytic Parameters of the Electrodeposition of Copper With Silicotungstic Acid (Sta). Electrochimica Acta, 44(17), 2927-2940. Lien externe
Girard, F., Izquierdo, R., Quenneville, E., Bah, S. T., Paleologou, M., Meunier, M., Ivanov, D., & Yelon, A. (1999). Evaluation of a Ceramic-Polymer Composite Cation-Selective Membrane for Sodium Salt Splitting. Journal of The Electrochemical Society, 146(8), 2919-2924. Lien externe
Güçlü, A. D. (1999). Simulation des dispositifs optoélectroniques par la méthode Monte Carlo [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Guclu, A. D., Rejeb, C., Maciejko, R., Morris, D., & Champagne, A. (1999). Photoluminescence Study of Carrier Dynamics and Recombination in a Strained Ingaasp/Inp Multiple-Quantum-Well Structure. Journal of Applied Physics, 86(6), 3391-3397. Lien externe
Hajek, V., Rusnak, K., Vlcek, J., Martinu, L., & Gujrathi, S. C. (1999). Influence of substrate bias voltage on the properties of CNₓ films prepared by reactive magnetron sputtering. Journal of vacuum science and technology. A, Vacuum, surfaces, and films, 17(3), 899-908. Lien externe
Hallil, A., Zabeida, O., Sapieha, J.-E., Wertheimer, M. R., & Martinu, L. Mass resolved ion energy distributions in dual-mode microwave/radio frequency plasma [Communication écrite]. Annual Technical Conference of the Society of Vacuum Coaters. Lien externe
Hammoutène, A., Bescond, C., Bertrand, L., Monchalin, J. P., & Neron, C. (1999). 1-D laser ultrasonic process modelling for nondestructive inspection of composites. AIP Conference Proceedings, 463(1), 460-462. Lien externe
He, H., Kovac, V., Rigaud, M., & Chabry, P. (août 1999). Oxidation behavior of graphitic materials usable in monolithic refractories [Communication écrite]. 3rd International Symposium on Advances in Refractories for the Metallurgical Industries, Québec City, Québec, Canada. Non disponible
Hénault, A., & Bertrand, L. (1999). Scattering of laser-generated ultrasonic waves in steel. AIP Conference Proceedings, 463(1), 463-465. Lien externe
Jak, E., Decterov, S., Pelton, A., Happ, J., & Hayes, P. C. (novembre 1997). Thermodynamic modelling of the system Al2O3-SiO2-CaO-FeO-Fe2O3 to characterise coal ash slags [Communication écrite]. Impact of Mineral Impurities in Solid Fuel Combustion '97, Kona, Hawaii. Lien externe
Jeanneau, P., Bertrand, L., Forget, B. C., & Fournier, D. (août 1998). Tomography with mirage effect [Communication écrite]. AIP conference proceedings, Rome (Italy). Lien externe
Kaveh, S., Koclas, J., & Roy, R. (mai 1999). Improved quasi-static method vs. the direct method: a case study for CANDU reactor transients [Communication écrite]. Communicating the nuclear advantage. 39th Annual Canadian Nuclear Association Conference & 20th Annual Canadian Nuclear Society Conference, Montréal, Québec. Non disponible
Kaveh, S., Koclas, J., & Roy, R. (mai 1999). Simulation of CANDU reactor transients using hierarchical super nodal analysis [Communication écrite]. Communicating the nuclear advantage. 39th Annual Canadian Nuclear Association Conference & 20th Annual Canadian Nuclear Society Conference, Montréal, Québec. Non disponible
Kongoli, F., & Pelton, A. (1999). Model Prediction of Thermodynamic Properties of Co-Fe-Ni-S Mattes. Metallurgical and Materials Transactions. B, Process Metallurgy and Materials Processing Science, 30(3), 443-450. Lien externe
Lafrenière, S. (1999). Développement d'électrolytes de sels fondus pour une pile rechargeable lithium-aluminium/sulfure de fer [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Léonard, D., Bertrand, P., Shi, M. K., Sacher, E., & Martinu, L. (1999). Plasma surface modification of fluoropolymers studied by ToF-SIMS. Plasmas and Polymers, 4(2-3), 97-111. Lien externe
Maachi, A. E., Sapieha, S., & Yelon, A. (1999). Angle-dependent delamination of paper. Part 3. Effect of work of detachment on work of peeling. Nordic Pulp & Paper Research Journal, 14(1), 17-22. Lien externe
Mameri, N., Oussedik, S., Yeddou, R., Piron, D.-L., Belhocine, D., Lounici, H., & Grib, H. (1999). Enhancement of Ultrafiltration Flux by Coupling Static Turbulence Promoter and Electric Field. Separation and Purification Technology, 17(3), 203-211. Lien externe
Mameri, N., Piron, D.-L., Derenne, M., & Marchand, L. (août 1999). Influence des joints d'étanchéité sur la corrosion des aciers: développement d'un nouvel appareillage [Communication écrite]. 1st International Symposium on Environmental Degradation of Materials and Corrosion Control In Metals (EDMCCM 1999), Québec, Québec. Non disponible
Mameri, N., Piron, D.-L., Derenne, M., Marchand, L., Bouzid, A., & Birembaut, Y. (1999). Effect of sealed joints tightness on steels corrosion: Development of novel technology. Environmental degradation of materials and corrosion control in metals, 287-299. Non disponible
Mameri, N., Piron, D.-L., Derenne, M., Marchand, L., Bouzid, A., & Birembaut, Y. (août 1999). Influence the sealing of joints on the corrosion of steels. Development of new equipment [Communication écrite]. international symposium on environmental degradation of materials and corrosion control in metals - 38. annual conference of metallurgists of CIM. Gateway to the 21st Century, Québec City, QB. Non disponible
Marin, E., Ghosh, R., Meunier, J. P., Daxhelet, X., & Lacroix, S. (janvier 1999). Analysis of influence of the tilt angle of Bragg gratings written in 2x2 symmetric fused fiber coupler [Communication écrite]. Bragg gratings, photosensitivity and poling in glass waveguides, Stuart, Florida. Lien externe
Marin, E., Ghosh, R., Meunier, J. P., Daxhelet, X., & Lacroix, S. (1999). Bragg gratings in 2 X 2 symmetric fused fiber couplers: influence of the tilt on the wavelength response. IEEE Photonics Technology Letters, 11(11), 1434-1436. Lien externe
Marin, E., Meunier, J. P., Daxhelet, X., Lacroix, S., & Ghosh, R. (janvier 1999). General method for solving the coupled equations using fast Fourier transform: application to Bragg grating spectrum prediction [Communication écrite]. International workshop on optical waveguide theory and numerical modeling, St-Etienne, France. Non disponible
Marois, C. (1999). Réalisation d'une procédure de traitement des fibres optiques par poling thermique et ultra-violet [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Martinu, L., Wertheimer, M. R., & Sapieha, J.-E. (novembre 1998). Recent advances in plasma deposition of functional coatings on polymers [Communication écrite]. 1998 MRS Fall Meeting: Symposium on Plasma Deposition and Treatment of Polymers, Boston, MA. Publié dans Materials Research Society Symposium - Proceedings, 544. Lien externe
Massabki, M., Bescond, C., Enguehard, F., & Bertrand, L. (1999). Thermal, optical and mechanical characterization of a composite by all-optical techniques. AIP Conference Proceedings, 463(1), 430-432. Lien externe
Ménard, D. (1999). Modélisation de la magnétoimpédance géante dans les conducteurs magnétiques cylindriques [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Ménard, D., Britel, M., Ciureanu, P., Yelon, A., Rouabhi, M., & Cochrane, R. W. (1999). Investigation of the Damping Parameter in Soft Magnetic Wires Using the Giant Magnetoimpedance Effect. Journal of Magnetism and Magnetic Materials, 203(1-3), 111-113. Lien externe
Meunier, M., Wu, X., Beaudoin, F., Sacher, E., & Simard-Normandin, M. (janvier 1999). Excimer laser cleaning for microelectronics : Modeling, applications and challenges [Communication écrite]. 4th Conference on Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM 1999), San Jose, CA, USA. Lien externe
Nie, B., & Verreman, Y. (janvier 1999). Initiation life prediction model for fatigue cracks at the toe of welded joints [Communication écrite]. Fatigue 1999 EMAS. Non disponible
Nikonov, V. (1999). Influence of electrode surface charge accumulation upon partial discharge behavior [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Paki, P., Leonelli, R., Isnard, L., & Masut, R. A. (1999). Exciton Resonances in Ultrathin InAs/InP Quantum Wells. Applied Physics Letters, 74(10), 1445-1447. Lien externe
Paki, P., Leonelli, R., Isnard, L., & Masut, R. A. (1999). Optical Properties of Submonolayer Inas/Inp Quantum Dots on Vicinal Surfaces. Journal of Applied Physics, 86(12), 6789-6792. Lien externe
Paris, J., & Yelon, A. (1999). Pulp and Paper Research and Education at Polytechnique: a Growing Partnership. Pulp & Paper Canada, 100(5), 35-37. Non disponible
Pelletier, R., & Allaire, C. (février 1999). Experimental investigation of frost heaving in aluminum reduction cells using a water model [Communication écrite]. 128th TMS Annual Meeting 'Light Metals 1999', San Diego, CA. Publié dans Light Metals: Proceedings of Sessions, TMS Annual Meeting. Lien externe
Pelton, A. (1999). Chemical thermodynamics and nuclear applications. Dans Chemical thermodynamics (p. 145-158). Non disponible
Pelton, A. (1999). Computational thermodynamics. Dans Computerized physical chemistry of metallurgy and materials (p. 147-161). Non disponible
Pelton, A. (1999). Thermodynamic Calculations of Chemical Solubilities of Gases in Oxide Melts and Glasses. Glass Science and Technology-Glastechnische Berichte, 72(7), 214-226. Non disponible
Pelton, A., & Bale, C. W. (1999). Proceedings of the FACT workshop - june 1-3 1998. Journal of Phase Equilibria, 20(3), 177-178. Non disponible
Pelton, A., & Bale, C. W. (1999). Thermodynamics. Dans Direct reduced iron : technology and economics of production and use (p. 25-41). Non disponible
Pelton, A., & Wu, P. (1999). Thermodynamic Modeling in Glass-Forming Melts. Journal of Non-Crystalline Solids, 253(1-3), 178-191. Lien externe
Plourde, H. (1999). Réalisation de composants tout-fibre coupleur 1X3 et jontion Y [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Popovici, D., Meunier, M., & Sacher, E. (1999). Laser-Enhanced Gas Phase Surface Modifications of Teflon AF1600 for Increased Copper Adhesion. Journal of Adhesion, 70(1-2), 155-166. Lien externe
Poulin, S., Ndzebet, E., Debrie, A., Savadogo, O., & Sacher, E. (1999). The Cleaning and Thiolation of Commercial Titanium for Use in Dental Prostheses. Applied Surface Science, 143(1-4), 238-244. Lien externe
Quenneville, É. (1999). Propriétés électroniques des couches minces de La0,5Sr0,5MnO3 [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Quenneville, E., Decorse, P., Meunier, M., Morin, F., & Yelon, A. (mai 1999). Electrical properties of annealed La₀.₅Sr₀.₅MnO₃ thin films prepared by pulsed laser deposition [Communication écrite]. Solid-State Ionic Devices Symposium, Seattle, WA, USA. Lien externe
Rats, D., Hajek, V., & Martinu, L. (1999). Micro-Scratch Analysis and Mechanical Properties of Plasma- Deposited Silicon-Based Coatings on Polymer Substrates. Thin Solid Films, 340(1-2), 33-39. Lien externe
Rats, D., Poitras, D., Soro, J. M., Martinu, L., & Von Stebut, J. (1999). Mechanical Properties of Plasma-Deposited Silicon-Based Inhomogeneous Optical Coatings. Surface and Coatings Technology, 111(2-3), 220-228. Lien externe
Rebouillat, L. (1999). Mise en valeur de l'andalousite dans des bétons à haute teneur en alumine [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Rebouillat, L., Rigaud, M., Daniellou, P., & Dubreuil, P. (août 1999). Hydraulically-bonded andalusite-based castables [Communication écrite]. 3rd International Symposium on Advances in Refractories for the Metallurgical Industries, Québec City, Québec, Canada. Non disponible
Rebouillat, L., Rigaud, M., Dubreuil, P., & Daniellou, P. New generation of high alumina castables with micronized andalusite [Communication écrite]. 6th European Ceramic Society Conference, Brighton, UK. Non disponible
Rigaud, M. (janvier 1999). Magnesia-carbon castables: a review [Communication écrite]. 82nd steelmaking conference, Chicago, USA. Non disponible
Rigaud, M., Guo, Z., He, H., & Kovac, V. (janvier 1999). Coatability, adherence and refractories evaluation [Communication écrite]. UNITECR'99, Berlin, Allemagne. Non disponible
Romero-Serrano, A., & Pelton, A. (1999). Thermodynamic Analysis of Binary and Ternary Silicate Systems by a Structural Model. ISIJ International, 39(5), 399-408. Lien externe
Ross, A., Ostiguy, G. L., & Amram, M. (1999). New signal processing developments for low cost near-field acoustical holography systems. Noise Control Engineering Journal, 47(1), 28-44. Lien externe
Rouabhi, M., Cochrane, R. W., Ménard, D., Britel, M., Ciureanu, P., & Yelon, A. (1999). Anisotropy and Magnetization Processes in Co-Rich Amorphous Wires. Journal of Applied Physics, 85(8), 5441-5443. Lien externe
Sacépé, N. (1999). Étude phénoménologique et microstructurale de l'alliage à mémoire de forme NiTi en réponse à des sollicitations thermomécaniques cycliques [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Sacépé, N., Turenne, S., & Brailovski, V. (août 1999). Combined analysis of the assisted two-way shape memory effect in NiTi. [Communication écrite]. International Symposium on Shape Memory Alloys, Québec City, Québec, Canada. Non disponible
Sapieha, J.-E., Martinu, L., Yamasaki, N. L. S., & Lantman, C. W. (novembre 1998). Plasma-induced stabilization of PMMA surfaces for enhanced adhesion of plasma-deposited coatings [Communication écrite]. 1998 MRS Fall Meeting: Symposium on Plasma Deposition and Treatment of Polymers, Boston, MA. Publié dans Materials Research Society Symposium - Proceedings, 544. Lien externe
Scumpu, S. (1999). Étude du comportement microstuctural d'une poudre de fer au cours du pressage [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Sheng, S., Sacher, E., Yelon, A., Branz, H. M., & Masson, D. P. (avril 1999). Structural changes in a-Si:H studied by X-ray photoemission spectroscopy [Communication écrite]. 1999 MRS Spring Meeting - Symposium A 'Amorphous and Heterogenous Silicon Thin Films: Fundamentals to Devices', San Francisco, CA. Publié dans Materials Research Society Symposium - Proceedings, 557. Lien externe
Shou, Y. (1999). Design and realization of all-fiber mode separating couplers [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Shou, Y., Bures, J., Lacroix, S., & Daxhelet, X. (1999). Mode separation in fused fiber coupler made of two-mode fibers. Optical Fiber Technology: Materials, Devices and Systems, 5(1), 92-104. Lien externe
Soares, J. A. N. T., Kim, H., Glass, G., Desjardins, P., & Greene, J. E. (1999). Arsenic-doped Si(001) gas-source molecular-beam epitaxy: Growth kinetics and transport properties. Applied Physics Letters, 74(9), 1290-1292. Lien externe
Sobrinho, A. D., Czeremuszkin, G., Latrèche, M., & Wertheimer, M. R. (1999). A Study of Defects in Ultra-Thin Transparent Coatings on Polymers. Applied Physics. A, Materials Science & Processing, 68(1), 103-105. Lien externe
Tabrizian, M., Thierry, B., Savadogo, O., & Yahia, L. (mars 1999). Surface characteristics of sterilized electropolished NiTi shape memory alloy as biomaterials [Communication écrite]. Sensory phenomena and measurement instrumentation for smart structures and materials. Conference, Newport Beach, CA, USA. Lien externe
Taylor, N., Kim, H., Spila, T., Eades, J. A., Glass, G., Desjardins, P., & Greene, J. E. (1999). Growth of Si₁₋ₓGeₓ(011) on Si(011)16x2 by gas-source molecular beam epitaxy: Growth kinetics, Ge incorporation, and surface phase transitions. Journal of Applied Physics, 85(1), 501-511. Lien externe
Tazi, B. (1999). Élaboration et caractérisation de nouvelles membranes à base de nafion et d'hétéropolyacides [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Thierry, B., Tabrizian, M., Yahia, L., & Savadogo, O. (août 1999). Effect of sterilization processes on the ions release of NiTi alloy [Communication écrite]. International Symposium on Shape Memory Alloys, Québec City, Québec, Canada. Non disponible
Tréanton, V. (1999). Caractérisation de l'interface entre deux matériaux par techniques laser-ultrasons [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Tréanton, V., Bescond, C., Hénault, A., & Bertrand, L. (1999). 2D-model for adhesion testing in laser ultrasonics. AIP Conference Proceedings, 463(1), 481-483. Lien externe
Trépanier, C., Leung, T. K., Tabrizian, M., Yahia, L., Bienvenu, J. G., Tanguay, J. F., Piron, D.-L., & Bilodeau, L. (1999). Preliminary Investigation of the Effects of Surface Treatments on Biological Response to Shape Memory Niti Stents. Journal of Biomedical Materials Research, 48(2), 165-171. Lien externe
Trépanier, C., Tabrizian, M., Yahia, L., Bilodeau, L., & Piron, D.-L. (1999). Erratum: Effect of modification of oxide layer on NiTi stent corrosion resistance. Journal of Biomedical Materials Research, 48(1), 96-98. Lien externe
Trochu, F., Sacépé, N., Volkov, O., & Turenne, S. (1999). Characterization of NiTi Shape Memory Alloys Using Dual Kriging Interpolation. Materials Science and Engineering. Part A, Structural materials: properties, microstructure and processing, 275, 395-399. Lien externe
Turenne, S., Godère, C., Thomas, Y., & Mongeon, P. E. (1999). Evaluation of friction conditions in powder compaction for admixed and die wall lubrication. Powder Metallurgy, 42(3), 263-268. Lien externe
Turenne, S., Legros, N., Laplante, S., & Ajersch, F. (1999). Mechanical Behavior of Aluminum Matrix Composite During Extrusion in the Semisolid State. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, 30(4), 1137-1146. Lien externe
Verreman, Y., Nie, B., & Espinosa, G. (juin 1999). Experimental technique for monitoring the early propagation of fatigue cracks at notches and smooth surfaces [Communication écrite]. Fatigue '99: Seventh International Fatigue Congress, Beijing, China. Non disponible
Vlcek, J., Rusnak, K., Hajek, V., & Martinu, L. (1999). Reactive magnetron sputtering of CNₓ films : Ion bombardment effects and process characterization using optical emission spectroscopy. Journal of Applied Physics, 86(7), 3646-3654. Lien externe
Wen, C. C., Hamel, L. A., & Yelon, A. (1999). Multiple-trapping model with field-dependent effects on carrier time of flight in a-Si:H. Journal of Non-Crystalline Solids, 258(1-3), 223-233. Lien externe
Wertheimer, M. R., Fozza, A. C., & Holländer, A. (1999). Industrial Processing of Polymers by Low-Pressure Plasmas: the Role of Vuv Radiation. Nuclear Instruments & Methods in Physics Research. Section B, Beam Interactions With Materials and Atoms, 151(1-4), 65-75. Lien externe
Wu, X., Sacher, E., & Meunier, M. (1999). The Effects of Hydrogen Bonds on the Adhesion of Inorganic Oxide Particles on Hydrophilic Silicon Surfaces. Journal of Applied Physics, 86(3), 1744-1748. Lien externe
Wu, X., Sacher, E., & Meunier, M. (1999). Excimer Laser Induced Removal of Particles From Hydrophilic Silicon Surfaces. Journal of Adhesion, 70(1-2), 167-178. Lien externe
Wu, X., Sacher, E., & Meunier, M. Photoacoustic wave emission during laser-enhanced particulate removal [Communication écrite]. Annual Meeting of the Adhesion Society. Non disponible
Xing, B. Z., & Savadogo, O. (1999). The Effect of Acid Doping on the Conductivity of Polybenzimidazole (Pbi). Journal of New Materials for Electrochemical Systems, 2(2), 95-101. Non disponible
Xing, C. (1999). Optimization of magnesia based, cement-free, spinel bonded castables [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Xu, S., Wu, X. J., Koul, A. K., & Dickson, J. I. (1999). An Intergranular Creep Crack Growth Model Based on Grain Boundary Sliding. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, 30(4), 1039-1045. Lien externe
Yahia, L., Lombardi, S., Piron, D.-L., & Okuyama, M. (août 1999). Corrosion protection of nickel-titanium shape memory alloy for implants [Communication écrite]. International Symposium on Shape Memory Alloys, Québec City, Québec, Canada. Non disponible
Ye, F., Rigaud, M., & Zhong, X. C. (1999). Effects of boron bearing additives on oxidation and corrosion resistance of doloma-based carbon-bonded refractories. Naihuo Cailiao, 33(2), 61-66. Non disponible
Yelon, A., Ménard, D., Britel, M., & Ciureanu, P. (juin 1998). Modelling of giant magnetoimpedance from 1 Hz to 10 GHz [Communication écrite]. 4th Latin American Workshop on Magnetism, Magnetic Materials and their Applications, Sao Paulo, Brazil. Publié dans Materials Science Forum, 302-303. Lien externe
Yelon, A., Paleologou, M., Ivanov, D. V., Izquierdo, R., & Meunier, M. (1999). Composite inorganic-polymer thin film cation-selective membrane, method of fabricating same and applications. (Brevet no US5968326). Lien externe
Zabeida, O., & Martinu, L. (1999). Ion Energy Distributions in Pulsed Large Area Microwave Plasma. Journal of Applied Physics, 85(9), 6366-6372. Lien externe
Zabeida, O., Sapieha, J.-E., Martinu, L., & Morton, D. (novembre 1998). Effect of ion bombardment in polymer surface modification: comparison of pulsed high frequency plasma and ion beam [Communication écrite]. 1998 MRS Fall Meeting: Symposium on Plasma Deposition and Treatment of Polymers, Boston, MA. Publié dans Materials Research Society Symposium - Proceedings, 544. Lien externe
Zabeida, O., Sapieha, J.-E., Martinu, L., & Morton, D. E. Ion bombardment characteristics during the growth of optical films using a cold cathode ion source [Communication écrite]. Annual Technical Conference of the Society of Vacuum Coaters. Lien externe
Zayed, J., Hong, B., & L'Espérance, G. (1999). Characterization of Manganese Containing Particles Collected From the Exhaust Emissions of Automobiles Running With Mmt Additive. Environmental Science & Technology, 33(19), 3341-3346. Lien externe
Zhou, N., & Rigaud, M. (novembre 1999). Al2O3-MgO-C castables for steelmaking ladles [Communication écrite]. 57th Electric Furnace Conference, Pittsburgh, PA, USA. Lien externe
