 | Monter d'un niveau |
Achiche, S., & Tomiyama, T. (2016). Design of Multidisciplinary Cyber Physical Systems. Journal of Integrated Design and Process Science, 19(3), 1-3. Lien externe
Achiche, S., Shlechtingen, M., Raison, M., Baron, L., & Santos, I. F. (2016). Adaptive Neuro-Fuzzy Inference System Models for Force Prediction of a Mechatronic Flexible Structure. Journal of Integrated Design & Process Science, 19(3), 77-94. Lien externe
Adouni, M., Shirazi-Adl, A., & Marouane, H. (2016). Role of gastrocnemius activation in knee joint biomechanics: gastrocnemius acts as an ACL antagonist. Computer Methods in Biomechanics and Biomedical Engineering, 19(4), 376-385. Lien externe
Akcayoz, E., Vo, H. D., & Mahallati, A. (2016). Controlling corner stall separation with plasma actuators in a compressor cascade. Journal of Turbomachinery, 138(8), 13 pages. Lien externe
Alloui, Z., & Vasseur, P. (2016). Natural convection in tall and shallow porous rectangular enclosures heated from below. Computational Thermal Sciences, 8(2), 163-176. Lien externe
Amrei, M. M., Monajati, H., Thibault, D., Verreman, Y., & Bocher, P. (2016). Effects of Various Post-Weld Heat Treatments on Austenite and Carbide Formation in a 13Cr4Ni Steel Multipass Weld. Metallography, Microstructure, and Analysis, 5(1), 50-61. Lien externe
Amrei, M. M., Monajati, H., Thibault, D., Verreman, Y., Germain, L., & Bocher, P. (2016). Microstructure characterization and hardness distribution of 13Cr4Ni multipass weld metal. Materials Characterization, 111, 128-136. Lien externe
Aramesh, M., Attia, M. H., Kishawy, H. A., & Balazinski, M. (2016). Estimating the remaining useful tool life of worn tools under different cutting parameters: A survival life analysis during turning of titanium metal matrix composites (Ti-MMCs). CIRP Journal of Manufacturing Science and Technology, 12, 35-43. Lien externe
Aramesh, M., Shaban, Y., Yacout, S., Attia, M. H., Kishawy, H. A., & Balazinski, M. (2016). Survival life analysis applied to tool life estimation with variable cutting conditions when machining titanium metal matrix composites (Ti-MMCs). Machining Science and Technology, 20(1), 132-147. Lien externe
Ashrafi, F., Michaud, M., & Vo, H. D. (2016). Delay of rotating stall in compressors using plasma actuators. Journal of Turbomachinery, 138(9), 12 pages. Lien externe
Aubin, C.-É., Labelle, H., Arnoux, P.-J., Parent, S., Wang, W., Baran, G., & Cahill, P. (2016). Biomechanics of high-grade spondylolisthesis with and without reduction. Medical & Biological Engineering & Computing, 54(4), 619-628. Lien externe
Ballaz, L., Raison, M., Detrembleur, C., Gaudet, G., & Lemay, M. (2016). Joint torque variability and repeatability during cyclic flexion-extension of the elbow. BMC Sports Science, Medicine and Rehabilitation, 8(1). Disponible
Batailly, A., Agrapart, Q., Millecamps, A., & Brunel, J.-F. (2016). Experimental and numerical simulation of a rotor/stator interaction event localized on a single blade within an industrial high-pressure compressor. Journal of Sound and Vibration, 375, 308-331. Lien externe
Béguin, C., Pelletier, É., & Étienne, S. (2016). Void fraction influence on added mass in a bubbly flow. European Journal of Mechanics - B/Fluids, 56, 28-45. Lien externe
Bejjani, R., Balazinski, M., Attia, H., Plamondon, P., & L'Espérance, G. (2016). Chip formation and microstructure evolution in the adiabatic shear band when machining titanium metal matrix composites. International Journal of Machine Tools and Manufacture, 109, 137-146. Lien externe
Belzile, B., & Birglen, L. (2016). Stiffness analysis of underactuated fingers and its application to proprioceptive tactile sensing. IEEE/ASME Transactions on Mechatronics, 21(6), 2672-2681. Lien externe
Benoit, A., Mustafy, T., Londono, I., Grimard, G., Aubin, C.-É., & Villemure, I. (2016). In vivo dynamic compression has less detrimental effect than static compression on newly formed bone of a rat caudal vertebra. Journal of Musculoskeletal & Neuronal Interactions, 16(3), 211-220. Lien externe
Bercegol, A., Christophe, V., Keshavarz, M. K., Vasilevskiy, D., Turenne, S., & Masut, R. A. (2016). Hot extruded polycrystalline Mg₂Si with embedded XS₂ nano-particles (X: Mo, W). Journal of Electronic Materials, 46(5), 2668-2675. Lien externe
Bianco, R.-J., Aubin, C.-É., Mac-Thiong, J.-M., Wagnac, E., & Arnoux, P.-J. (2016). Pedicle Screw Fixation Under Nonaxial Loads: A Cadaveric Study. Spine, 41(3), E124-E130. Lien externe
Bitar-Nehme, E., & Mayer, J. R. R. (2016). Thermal volumetric effects under axes cycling using an invar R-test device and reference length. International Journal of Machine Tools and Manufacture, 105, 14-22. Lien externe
Brahimi, T., Saeed, F., & Paraschivoiu, I. (2016). Aerodynamic models for the analysis of vertical axis wind turbines (VAWTs). International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 10(1), 203-209. Lien externe
Brideau, S. A., Beausoleil-Morrison, I., Kummert, M., & Wills, A. (2016). Inter-model comparison of embedded-tube radiant floor models in BPS tools. Journal of Building Performance Simulation, 9(2), 190-209. Lien externe
Bruna-Rosso, C., Arnoux, P.-J., Bianco, R.-J., Godio-Raboutet, Y., Fradet, L., & Aubin, C.-É. (2016). Finite Element Analysis of Sacroiliac Joint Fixation under Compression Loads. International Journal of Spine Surgery, 10, 11 pages. Lien externe
Caouette, C., Ikin, N., Villemure, I., Arnoux, P. J., Rauch, F., & Aubin, C.-É. (2016). Geometry reconstruction method for patient-specific finite element models for the assessment of tibia fracture risk in osteogenesis imperfecta. Medical & Biological Engineering & Computing, 55(4), 549-560. Lien externe
Cevik, M., Vo, H. D., & Yu, H. (2016). Casing treatment for desensitization of compressor performance and stability to tip clearance. Journal of Turbomachinery, 138(12), 16 pages. Lien externe
Chizari, K., Daoud, M. A., Ravindran, A. R., & Therriault, D. (2016). 3D printing of highly conductive nanocomposites for the functional optimization of liquid sensors. Small, 12(44), 6076-6082. Disponible
Chizari, K., Daoud, M. A., Ravindran, A. R., & Therriault, D. (2016). Liquid Materials: 3D Printing of Highly Conductive Nanocomposites for the Functional Optimization of Liquid Sensors (Small 44/2016). Small, 12(44), 6176-6176. Lien externe
Cimmino, M. (2016). Fluid and borehole wall temperature profiles in vertical geothermal boreholes with multiple U-tubes. Renewable Energy, 96, Part A, 137-147. Lien externe
Cobetto, N., Aubin, C.-É., Parent, S., Clin, J., Barchi, S., Turgeon, I., & Labelle, H. (2016). Effectiveness of braces designed using computer-aided design and manufacturing (CAD/CAM) and finite element simulation compared to CAD/CAM only for the conservative treatment of adolescent idiopathic scoliosis: a prospective randomized controlled trial. European Spine Journal, 25(10), 3056-3064. Disponible
D'Avignon, K., & Kummert, M. (2016). Experimental assessment of a phase change material storage tank. Applied Thermal Engineering, 99, 880-891. Lien externe
Dalir, H., Farahani, R. D., Hernandez, L., Aldebert, C., Lévesque, M., & Therriault, D. (2016). Three-Dimensional Dielectrophoretic Microparticle Separator Fabricated by Ultraviolet-Assisted Direct-Write Assembly. Journal of Nanoscience and Nanotechnology, 16(1), 765-771. Lien externe
de Pannemaecker, A., Fouvry, S., Brochu, M., & Buffiere, J. Y. (2016). Identification of the fatigue stress intensity factor threshold for different load ratios R: From fretting fatigue to C(T) fatigue experiments. International Journal of Fatigue, 82, 211-225. Lien externe
Delisle, V., & Kummert, M. (2016). Cost-benefit analysis of integrating BIPV-T air systems into energy-efficient homes. Solar Energy, 136, 385-400. Lien externe
Dellacherie, S., Jamelot, E., & Lafitte, O. (2016). A simple monodimensional model coupling an enthalpy transport equation and a neutron diffusion equation. Applied Mathematics Letters, 62, 35-41. Lien externe
Dellacherie, S., Jung, J., Omnes, P., & Raviart, P. A. (2016). Construction of modified Godunov-type schemes accurate at any Mach number for the compressible Euler system. Mathematical Models and Methods in Applied Sciences, 26(13), 2525-2615. Lien externe
Demers, V., Demarquette, N. R., Turenne, S., & Scalzo, O. (2016). Molding Properties of Inconel 718 Feedstocks Used in Low-Pressure Powder Injection Molding. Advances in Materials Science and Engineering, 2016, 1-7. Disponible
Di Fratta, C., Koutsoukis, G., Klunker, F., Trochu, F., & Ermanni, P. (2016). Characterization of anisotropic permeability from flow front angle measurements. Polymer Composites, 37(7), 2037-2052. Lien externe
Dreischarf, M., Shirazi-Adl, A., Arjmand, N., Rohlmann, A., & Schmidt, H. (2016). Estimation of Loads on Human Lumbar Spine: A Review of In Vivo and Computational Model Studies. Journal of Biomechanics, 49(6), 833-845. Lien externe
Driscoll, M., Aubin, C.-É., Moreau, A., Wakula, Y., Amini, S., & Parent, S. (2016). Novel Hemi-Staple for the Fusionless Correction of Pediatric Scoliosis: Influence on Intervertebral Disks and Growth Plates in a Porcine Model. Clinical Spine Surgery, 29(9), 457-464. Lien externe
Dugre, A., Vadean, A., & Chaussee, J. (2016). Challenges of using topology optimization for the design of pressurized stiffened panels. Structural and Multidisciplinary Optimization, 53(2), 303-320. Lien externe
Duong, X.T., Mayer, J. R. R., & Balazinski, M. (2016). Initial tool wear behavior during machining of titanium metal matrix composite (TiMMCs). International Journal of Refractory Metals and Hard Materials, 60, 169-176. Lien externe
El Mourid, A., Ganesan, R., Brochu, M., & Lévesque, M. (2016). Effect of temperature on the failure modes of a triaxially braided polymer matrix composite. International Journal of Solids and Structures, 97-98, 1-15. Lien externe
El Ouaaid, Z., Shirazi-Adl, A., & Plamondon, A. (2016). Effects of variation in external pulling force magnitude, elevation, and orientation on trunk muscle forces, spinal loads and stability. Journal of Biomechanics, 49(6), 946-952. Lien externe
Erler, E., Vo, H. D., & Yu, H. (2016). Desensitization of axial compressor performance and stability to tip clearance size. Journal of Turbomachinery, 138(3), 12 pages. Lien externe
Fallah, F., Nosier, A., Sharifi, M., & Ghezelbash, F. (2016). On perturbation method in mechanical, thermal and thermo-mechanical loadings of plates: cylindrical bending of FG plates. Zamm-Zeitschrift Fur Angewandte Mathematik Und Mechanik, 96(2), 217-232. Lien externe
Farahani, R. D., Dubé, M., & Therriault, D. (2016). Three-dimensional printing of multifunctional nanocomposites: Manufacturing techniques and applications. Advanced Materials, 28(28), 5794-5821. Disponible
Farahani, R. D., Gagne, M., Sapieha, J.-E., & Therriault, D. (2016). Electrically Conductive Silver Nanoparticles-Filled Nanocomposite Materials as Surface Coatings of Composite Structures. Advanced Engineering Materials, 18(7), 1189-1199. Lien externe
Fattah-Alhosseini, A., Gashti, S. O., & Keshavarz, M. K. (2016). Effect of Film Formation Potential on Passive Behavior of Ultra-Fine-Grained 1050 Al Alloy Fabricated via ARB Process. Journal of Materials Engineering and Performance, 25(4), 1683-1689. Lien externe
Fotsing, E. R., Leclerc, C., Sola, M., Ross, A., & Ruiz, E. (2016). Mechanical properties of composite sandwich structures with core or face sheet discontinuities. Composites Part B: Engineering, 88, 229-239. Lien externe
Fradet, L., Arnoux, P.-J., Callot, V., & Petit, Y. (2016). Geometrical variations in white and gray matter affect the biomechanics of spinal cord injuries more than the arachnoid space. Advances in Mechanical Engineering, 8(8), 168781401666470. Disponible
Fradet, L., Cliche, F., Petit, Y., Mac-Thiong, J. M., & Arnoux, P. J. (2016). Strain rate dependent behavior of the porcine spinal cord under transverse dynamic compression. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 230(9), 858-866. Lien externe
Fradet, L., Wang, X., Lenke, L. G., & Aubin, C.-É. (2016). Biomechanical analysis of proximal junctional failure following adult spinal instrumentation using a comprehensive hybrid modeling approach. Clinical Biomechanics, 39, 122-128. Lien externe
Gallay, S., & Laurendeau, É. (2016). Preliminary-design aerodynamic model for complex configurations using lifting-line coupling algorithm. Journal of Aircraft, 53(4), 1145-1159. Lien externe
Gariépy, A., Larose, S., Perron, C., & Lévesque, M. (2016). Corrigendum to “Shot peening and peen forming finite element modelling - Towards a quantitative method”. International Journal of Solids and Structures, 83, 183-183. Lien externe
Gascon, L., Garcia, J. A., LeBel, F., Ruiz, E., & Trochu, F. (2016). A two-phase flow model to simulate mold filling and saturation in Resin Transfer Molding. International Journal of Material Forming, 9(2), 229-239. Lien externe
Gaudet, G., Raison, M., Maso, F. D., Achiche, S., & Begon, M. (2016). Intra- and intersession reliability of surface electromyography on muscles actuating the forearm during maximum voluntary contractions. Journal of Applied Biomechanics, 32(6), 558-570. Lien externe
Gauvin, R. (2016). Investigating the Thermoformability of Uhmw-Polyethylene. Journal of Plastic Film & Sheeting, 3(4), 312-324. Lien externe
Gervais, B., Vadean, A., Raison, M., & Brochu, M. (2016). Failure analysis of a 316L stainless steel femoral orthopedic implant. Case Studies in Engineering Failure Analysis, 5-6, 30-38. Disponible
Ghandehariun, A., Kishawy, H., & Balazinski, M. (2016). On machining modeling of metal matrix composites: A novel comprehensive constitutive equation. International Journal of Mechanical Sciences, 107, 235-241. Lien externe
Ghezelbash, F., Shirazi-Adl, A., Arjmand, N., El-Ouaaid, Z., & Plamondon, A. (2016). Subject-specific biomechanics of trunk: musculoskeletal scaling, internal loads and intradiscal pressure estimation. Biomechanics and Modeling in Mechanobiology, 15(6), 1699-1712. Lien externe
Ghezelbash, F., Shirazi-Adl, A., Arjmand, N., El-Ouaaid, Z., Plamondon, A., & Meakin, J. R. (2016). Effects of sex, age, body height and body weight on spinal loads: Sensitivity analyses in a subject-specific trunk musculoskeletal model. Journal of Biomechanics, 49(14), 3492-3501. Lien externe
Ghiasi, M. S., Arjmand, N., Shirazi-Adl, A., Farahmand, F., Hashemi, H., Bagheri, S., & Valizadeh, M. (2016). Cross-sectional area of human trunk paraspinal muscles before and after posterior lumbar surgery using magnetic resonance imaging. European Spine Journal, 25(3), 774-782. Lien externe
Givi, M., & Mayer, J. R. R. (2016). Optimized volumetric error compensation for five-axis machine tools considering relevance and compensability. CIRP Journal of Manufacturing Science and Technology, 12, 44-55. Lien externe
Grasland-Mongrain, P., Yuankang, L., Lesage, F., Catheline, S., & Cloutier, G. (2016). Generation of shear waves by laser in soft media in the ablative and thermoelastic regimes. Applied Physics Letters, 109(22), 5 pages. Lien externe
Gravina, A. N., D'Elia, N. L., Sartuqui, J., Maghi, K., Yahia, L., & Messina, P. V. (2016). Ce-TiO2 material with promising characteristics for osseointegration: Interaction with fibroblasts and effect of albumin adsorption and bioactivity on 3D surface topography. Bone, 89, 65-65. Lien externe
Gravina, N., Maghni, K., Welman, M., Yahia, L., Mbeh, D. A., & Messina, P. V. (2016). Protective role against hydrogen peroxide and fibroblast stimulation via Ce-doped TiO₂ nanostructured materials. Biochimica Et Biophysica Acta-General Subjects, 1860(2), 452-464. Lien externe
Hached, S., Trigui, A., Garon, A., Loutochin, O., Corcos, J., & Sawan, M. (2016). Novel electromechanic artificial urinary sphincter. IEEE/ASME Transactions on Mechatronics, 21(2), 945-955. Lien externe
Hachem, B., Aubin, C.-É., & Parent, S. (2016). Local Epiphyseal Growth Modulation for the Early Treatment of Progressive Scoliosis: Experimental Validation Using a Porcine Model. Spine, 41(17), E1009-E1015. Lien externe
Hadji, A., & Mureithi, N. W. (2016). Identification of friction model parameters using the inverse harmonic method. Journal of Pressure Vessel Technology, 139(2), 57 pages. Lien externe
Hasanzadeh, K., Laurendeau, É., & Paraschivoiu, I. (2016). Grid-generation algorithms for complex glaze-ice shapes Reynolds-averaged Navier-Stokes simulations. AIAA Journal, 54(3), 847-860. Lien externe
Hassani, M., Mureithi, N. W., & Gosselin, F. (2016). Large coupled bending and torsional deformation of an elastic rod subjected to fluid flow. Journal of Fluids and Structures, 62, 367-383. Lien externe
Hassanipour, M., Verreman, Y., Lanteigne, J., & Chen, J. Q. (2016). Effect of periodic underloads on fatigue crack growth in three steels used in hydraulic turbine runners. International Journal of Fatigue, 85, 40-48. Lien externe
Hébert, A. (2016). DRAGON5 and DONJON5, the contribution of École Polytechnique de Montréal to the SALOME platform. Annals of Nuclear Energy, 87, 12-20. Lien externe
Hébert, A. (2016). High-Order Linear Discontinuous and Diamond Differencing Schemes Along Cyclic Characteristics. Nuclear Science and Engineering, 184(4), 591-603. Lien externe
Hehenberger, P., Vogel-Heuser, B., Bradley, D., Eynard, B., Tomiyama, T., & Achiche, S. (2016). Design, modelling, simulation and integration of cyber physical systems: Methods and applications. Computers in Industry, 82, 273-289. Lien externe
Henao, J., Aubin, C.-É., Labelle, H., & Arnoux, J. P. (2016). Patient-specific finite element model of the spine and spinal cord to assess the neurological impact of scoliosis correction, preliminary application on two cases with and without intraoperative neurological complications. Computer Methods in Biomechanics and Biomedical Engineering, 19(8), 900-910. Lien externe
Henault, B., Pasquier, P., & Kummert, M. (2016). Financial optimization and design of hybrid ground-coupled heat pump systems. Applied Thermal Engineering, 93, 72-82. Lien externe
Hosseinimanesh, H., Devals, C., Nennemann, B., Reggio, M., & Guibault, F. (2016). A numerical study of Francis turbine operation at no-load condition. Journal of Fluids Engineering, 139(1), 60 pages. Lien externe
Huber, M., Gilbert, G., Roy, J., Parent, S., Labelle, H., & Périé-Curnier, D. (2016). Sensitivity of MRI parameters within intervertebral discs to the severity of adolescent idiopathic scoliosis. Journal of Magnetic Resonance Imaging, 76(5), 1123-1131. Lien externe
Hughes, V., Tabiai, I., Chizari, K., & Therriault, D. (2016). 3D printable conductive nanocomposites of PLA and multi‑walled carbon nanotubes. Material Matters, 11(2), 61-63. Lien externe
Iliescu, L. E., Lakis, A. A., & Oulmane, A. (2016). Hypervelocity impact (HVI) signal analysis. European Journal of Engineering and Technology, 4(1), 66-93. Lien externe
Iliescu, L. E., Lakis, A. A., & Oulmane, A. (2016). Satellites-spacecraft materials and hypervelocity impact (HVI) testing: numerical simulations. European Journal of Mechanical Engineering Research, 3(3), 41-77. Lien externe
Jamin, T., Dube, M., & Laberge Lebel, L. (2016). Effect of stamp-forming parameters and bend radius on the mechanical performance of curved beam carbon fiber/polyphenylene sulfide specimens. Journal of Composite Materials, 50(9), 1213-1225. Lien externe
Kaviani, R., Londono, I., Parent, S., Moldovan, F., & Villemure, I. (2016). Growth plate cartilage shows different strain patterns in response to static versus dynamic mechanical modulation. Biomechanics and Modeling in Mechanobiology, 15(4), 933-946. Lien externe
Kaviani, R., Merat, P., Moldovan, F., & Villemure, I. (2016). An automated cell viability quantification method for low-resolution confocal images of closely packed cells based on a modified gradient flow tracking algorithm. Journal of Microscopy, 261(3), 217-226. Lien externe
Kerboua, Y., & Lakis, A. A. (2016). Numerical model to analyze the aerodynamic behavior of a combined conicalcylindrical shell. Aerospace Science and Technology, 58, 601-617. Lien externe
Keshavarz, M. K., Vasilevskiy, D., Masut, R. A., & Turenne, S. (2016). Mechanical properties of bismuth telluride based alloys with embedded MoS2nano-particles. Materials & Design, 103, 114-121. Lien externe
Khalfi, B., & Ross, A. (2016). Transient and harmonic response of a sandwich with partial constrained layer damping: A parametric study. Composites Part B: Engineering, 91, 44-45. Lien externe
Khameneifar, F., & Feng, H.-Y. (2016). A new methodology for evaluating position and orientation errors of airfoil sections. International Journal of Advanced Manufacturing Technology, 83(5-8), 1013-1023. Lien externe
Lakis, A. A., & Trinh, N. D. (2016). Void fraction in highly turbulent and large diameter horizontal pipe flow. European Journal of Engineering and Technology, 4(2), 55-77. Lien externe
Lapointe, S., Zhim, F., Sideris, L., Drolet, P., Celestin-Noel, S., & Dube, P. (2016). Effect of chemotherapy and heat on biomechanical properties of absorbable sutures. Journal of Surgical Research, 200(1), 59-65. Lien externe
Lashkajani, K. H., Ghorbani, B., Amidpour, M., & Hamedi, M.-H. (2016). Superstructure optimization of the olefin separation system by harmony search and genetic algorithms. Energy, 99, 288-303. Lien externe
Le Navéaux, F., Larson, A. N., Labelle, H., Wang, X., & Aubin, C.-É. (2016). How does implant distribution affect 3D correction and bone-screw forces in thoracic adolescent idiopathic scoliosis spinal instrumentation? Clinical Biomechanics, 39, 25-31. Lien externe
Leclaire, S., Abahri, K., Belarbi, R., & Bennacer, R. (2016). Modeling of static contact angles with curved boundaries using a multiphase lattice Boltzmann method with variable density and viscosity ratios. International Journal for Numerical Methods in Fluids, 82(8), 451-470. Lien externe
Leclaire, S., Pellerin, N., Reggio, M., & Trépanier, J.-Y. (2016). A multiphase lattice Boltzmann method for simulating immiscible liquid-liquid interface dynamics. Applied Mathematical Modelling, 40(13-14), 6376-6394. Lien externe
Luk-Cyr, J., El-Bawab, R., Champliaud, H., Lanteigne, J., & Vadean, A. (2016). Sequential approximate optimization of industrial hammer peening using finite element simulations. Structural and Multidisciplinary Optimization, 55(3), 767-778. Lien externe
Luk-Cyr, J., El-Bawab, R., Lanteigne, J., Champliaud, H., & Vadean, A. (2016). Mechanical properties of 75% Ar / 25% CO2 flux-cored arc welded E309L austenitic stainless steel. Materials Science and Engineering: A, 678, 197-203. Lien externe
Mahvash, A., & Lakis, A. A. (2016). Independent component analysis as applied to vibration source separation and fault diagnosis. Journal of Vibration and Control, 22(6), 1682-1692. Lien externe
Malouin, B., Trépanier, J.-Y., & Laurendeau, É. (2016). Installation and interference drag decomposition via RANS far-field methods. Aerospace Science and Technology, 54, 132-142. Lien externe
Manac'h, Y. G., Gilbert, G., Beaudoin, G., & Périé-Curnier, D. (2016). Relaxation times and diffusion tensor imaging detecting changes within bovine nucleus pulposus during enzyme digestion: cross-effect of the hydration and digestion. Computer Methods in Biomechanics and Biomedical Engineering-Imaging and Visualization, 4(6), 344-351. Lien externe
Marouane, H., Shirazi-Adl, A., & Adouni, M. (2016). Alterations in knee contact forces and centers in stance phase of gait: A detailed lower extremity musculoskeletal model. Journal of Biomechanics, 49(2), 185-192. Lien externe
Marouene, A., Boukhili, R., Chen, J., & Yousefpour, A. (2016). Buckling behavior of variable-stiffness composite laminates manufactured by the tow-drop method. Composite Structures, 139, 243-253. Disponible
Marouene, A., Boukhili, R., Chen, J., & Yousefpour, A. (2016). Effects of gaps and overlaps on the buckling behavior of an optimally designed variable-stiffness composite laminates - A numerical and experimental study. Composite Structures, 140, 556-566. Lien externe
Maso, F. D., Blache, Y., Raison, M., Arndt, A., & Begon, M. (2016). Distance between rotator cuff footprints and the acromion, coracoacromial ligament, and coracoid process during dynamic arm elevations: preliminary observations. Manual Therapy, 25(September), 94-99. Lien externe
Mbeh, D. A., Hadjab, I., Ungur, M.-E., & Yahia, L. (2016). The effect of micro-pulsatile electrical and ultrasound stimulation on cellular biosynthetic activities such as cellular proliferation, endogenous nitrogen oxide and collagen synthesis. Journal of Cosmetics, Dermatological Sciences and Applications, 6(1), 41-47. Disponible
Mehdi Zadeh, F., Étienne, S., & Teyssedou, A. (2016). 2-D CFD time-dependent thermal-hydraulic simulations of CANDU-6 moderator flows. Nuclear Engineering and Design, 309, 122-135. Lien externe
Mehdi Zadeh, F., Étienne, S., & Teyssedou, A. (2016). Computational Fluid Dynamic Simulation of the Moderator Flow in CANDU-6 Nuclear Reactors. Journal of Nuclear Engineering and Radiation Science, 3(1), 13 pages. Lien externe
Menard, A. L., Grimard, G., Massol, E., Londono, I., Moldovan, F., & Villemure, I. (2016). Static and dynamic compression application and removal on the intervertebral discs of growing rats. Journal of Orthopaedic Research, 34(2), 290-298. Lien externe
Michaud, M., Milan, P., & Vo, H. D. (2016). Low-Cost Rotating Experimentation in Compressor Aerodynamics Using Rapid Prototyping. International Journal of Rotating Machinery, 2016, 1-10. Disponible
Mireles, L. K., Sacher, E., Yahia, L., Laurent, S., & Stanicki, D. (2016). A comparative physicochemical, morphological and magnetic study of silane-functionalized superparamagnetic iron oxide nanoparticles prepared by alkaline coprecipitation. International Journal of Biochemistry & Cell Biology, 75, 203-211. Lien externe
Mohebbi, A., Achiche, S., & Baron, L. (2016). Design of a vision guided mechatronic quadrotor system using design for control methodology. Transactions of the Canadian Society for Mechanical Engineering, 40(2), 201-219. Lien externe
Oulmane, A., Lakis, A. A., & Mureithi, N. W. (2016). Automatic fault diagnosis of rotating machinery. European Journal of Mechanical Engineering Research, 3(2), 19-41. Lien externe
Parent, A., Raison, M., Pouliot-Laforte, A., Marois, P., Maltais, D. B., & Ballaz, L. (2016). Impact of a short walking exercise on gait kinematics in children with cerebral palsy who walk in a crouch gait. Clinical Biomechanics, 34, 18-21. Lien externe
Pena, D., Hoarau, Y., & Laurendeau, É. (2016). Development of a three-dimensional icing simulation code in the NSMB flow solver. International Journal of Engineering Systems Modelling and Simulation, 8(2), 86-98. Lien externe
Pena, D., Hoarau, Y., & Laurendeau, É. (2016). A single step ice accretion model using Level-Set method. Journal of Fluids and Structures, 65, 278-294. Lien externe
Piollet, E., Poquillon, D., & Michon, G. (2016). Dynamic hysteresis modelling of entangled cross-linked fibres in shear. Journal of Sound and Vibration, 383, 248-264. Lien externe
Provencher, P. R., & Balazinski, M. (2016). Automatic identification of feed marks in machined surface roughness profiles by correlating random variations. International Journal of Advanced Manufacturing Technology, 82(5-8), 1305-1315. Lien externe
Rahman, M. M., & Mayer, J. R. R. (2016). Calibration performance investigation of an uncalibrated indigenous artefact probing for five-axis machine tool. Journal of Machine Engineering, 16(1), 33-42. Lien externe
Rahman, M. M., & Mayer, J. R. R. (2016). Measurement Accuracy Investigation of Touch Trigger Probe with Five-Axis Machine Tools. Archive of Mechanical Engineering, 63(4), 495-510. Disponible
Rahman, M. M., & Mayer, J. R. R. (2016). Performance of a five-axis machine tool as a coordinate measuring machine (CMM). Journal of Advanced Mechanical Design, Systems, and Manufacturing, 10(5), 14 pages. Lien externe
Rak, M. B., Wozniak, A., & Mayer, J. R. R. (2016). The use of low density high accuracy (LDHA) data for correction of high density low accuracy (HDLA) point cloud. Optics and Lasers in Engineering, 81, 140-150. Lien externe
Rebhi, R., Mamou, M., Vasseur, P., & Alliche, M. (2016). Form drag effect on the onset of non-linear convection and Hopf bifurcation in binary fluid saturating a tall porous cavity. International Journal of Heat and Mass Transfer, 100, 178-190. Lien externe
Renaud, J., Vernet, N., Ruiz, E., & Laberge Lebel, L. (2016). Creep compaction behavior of 3D carbon interlock fabrics with lubrication and temperature. Composites Part A: Applied Science and Manufacturing, 86, 87-96. Lien externe
Rimpault, X., Chatelain, J. F., Sapieha, J.-E., & Balazinski, M. (2016). Surface profile texture characterization of trimmed laminated composite in the stacking sequence direction. Journal of the International Measurement Confederation, 91, 84-92. Lien externe
Rimpault, X., Chatelain, J.-F., Sapieha, J.-E., & Balazinski, M. (2016). Surface profile topography of trimmed and drilled carbon/epoxy composite. Procedia CIRP, 45, 27-30. Disponible
Sabaghi, M., Mascle, C., & Baptiste, P. (2016). Evaluation of products at design phase for an efficient disassembly at end-of-life. Journal of Cleaner Production, 116, 177-186. Lien externe
Sabaghi, M., Mascle, C., Baptiste, P., & Rostamzadeh, R. (2016). Sustainability assessment using fuzzy-inference technique (SAFT): A methodology toward green products. Expert Systems With Applications, 56, 69-79. Lien externe
Salvat, N., Batailly, A., & Legrand, M. (2016). Two-dimensional modeling of unilateral contact-induced shaft precessional motions in bladed-disk/casing systems. International Journal of Non-Linear Mechanics, 78, 90-104. Lien externe
Salvi, G., Aubin, C.-É., Le Naveaux, F., Wang, X., & Parent, S. (2016). Biomechanical analysis of Ponte and pedicle subtraction osteotomies for the surgical correction of kyphotic deformities. European Spine Journal, 25(8), 2452-2460. Lien externe
Samadi, B., Achiche, S., Parent, A., Ballaz, L., Chouinard, U., & Raison, M. (2016). Custom sizing of lower limb exoskeleton actuators using gait dynamic modelling of children with cerebral palsy. Computer Methods in Biomechanics and Biomedical Engineering, 19(14), 1519-1524. Lien externe
Sarcher, A., Brochard, S., Raison, M., Leboeuf, F., Perrouin-Verbe, B., & Gross, R. (2016). Évaluation de la chirurgie de réanimation de l'extension du coude chez des patients tétraplégiques C5/C6 par l'analyse du mouvement. Clinical Neurophysiology, 46(4-5), 279-279. Lien externe
Sarcher, A., Brochard, S., Raison, M., Leboeuf, F., Perrouin-Verbe, B., Letellier, G., & Gross, R. (2016). Effet d'une thérapie motrice induite par la contrainte sur la cinématique et l'activation musculaire du membre supérieur atteint d'enfants hémiparétiques. Clinical Neurophysiology, 46(4-5), 279-279. Lien externe
Sartuqui, J., Gravina, A. N., Rial, R., Benedini, L. A., Yahia, L., Ruso, J. M., & Messina, P. V. (2016). Biomimetic fiber mesh scaffolds based on gelatin and hydroxyapatite nano-rods: designing intrinsic skills to attain bone reparation abilities. Colloids and Surfaces B: Biointerfaces, 145, 382-391. Lien externe
Sattout, A., Clin, J., Cobetto, N., Labelle, H., & Aubin, C.-É. (2016). Biomechanical Assessment of Providence Nighttime Brace for the Treatment of Adolescent Idiopathic Scoliosis. Spine Deformity, 4(4), 253-260. Lien externe
Schmidt, H., Reitmaier, S., Graichen, F., & Shirazi-Adl, A. (2016). Review of the fluid flow within intervertebral discs - How could in vitro measurements replicate in vivo? Journal of Biomechanics, 49(14), 3133-3146. Lien externe
Schmidt, H., Schilling, C., Puente Reyna, A. L., Shirazi-Adl, A., & Dreischarf, M. (2016). Fluid-flow dependent response of intervertebral discs under cyclic loading: On the role of specimen preparation and preconditioning. Journal of Biomechanics, 49(6), 846-856. Lien externe
Schmidt, H., Shirazi-Adl, A., Schilling, C., & Dreischarf, M. (2016). Preload substantially influences the intervertebral disc stiffness in loading-unloading cycles of compression. Journal of Biomechanics, 49(9), 1926-1932. Lien externe
Shahvarpour, A., Shirazi-Adl, A., & Lariviere, C. (2016). Active-passive biodynamics of the human trunk when seated on a wobble chair. Journal of Biomechanics, 49(6), 939-945. Lien externe
Shirazi-Adl, A., Schmidt, H., & Kingma, I. (2016). Spine Loading and Deformation - From Loading to Recovery. Journal of Biomechanics, 49(6), 813-816. Lien externe
Sommier, E., Fotsing, E.-R., Ross, A., & Lavoie, M. (2016). Characterization of the injection molding process of passive vibration isolators. Journal of Elastomers and Plastics, 48(1), 58-79. Lien externe
Stavenuiter, R. A. J., Birglen, L., & Herder, J. L. (2016). A planar underactuated grasper with adjustable compliance. Mechanism and Machine Theory, 12, 295-306. Lien externe
Thong, W., Parent, S., Wu, J., Aubin, C.-É., Labelle, H., & Kadoury, S. (2016). Three-dimensional morphology study of surgical adolescent idiopathic scoliosis patient from encoded geometric models. European Spine Journal, 25(10), 3104-3113. Lien externe
Vafaeian, S., Fattah-alhosseini, A., Mazaheri, Y., & Keshavarz, M. K. (2016). On the study of tensile and strain hardening behavior of a thermomechanically treated ferritic stainless steel. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 669, 480-489. Lien externe
Vakili-Azghandi, M., Fattah-alhosseini, A., & Keshavarz, M. K. (2016). Effects of Al2O3 nano-particles on corrosion performance of plasma electrolytic oxidation coatings formed on 6061 aluminum alloy. Journal of Materials Engineering and Performance, 25(12), 5302-5313. Lien externe
Vasilevskiy, D., Simard, J. M., Caillat, T., Masut, R. A., & Turenne, S. (2016). Consistency of ZT-Scanner for Thermoelectric Measurements from 300 K to 700 K: A Comparative Analysis Using Si₈₀Ge₂₀ Polycrystalline Alloys. Journal of Electronic Materials, 45(3), 1540-1547. Lien externe
Vasilevskiy, D., Simard, J. M., Masut, R. A., & Turenne, S. (2016). Reduction of Specimen Size for the Full Simultaneous Characterization of Thermoelectric Performance. Journal of Electronic Materials, 46(5), 3007-3011. Lien externe
Veilleux, L.-N., Raison, M., Rauch, F., Robert, M., & Ballaz, L. (2016). Agreement of spatio-temporal gait parameters between a vertical ground reaction force decomposition algorithm and a motion capture system. Gait & Posture, 43, 257-264. Lien externe
Vernet, N., & Trochu, F. (2016). Analysis and modeling of 3D interlock fabric compaction behavior. Composites Part A: Applied Science and Manufacturing, 80, 182-193. Lien externe
Vernet, N., & Trochu, F. (2016). Analysis of mesoscopic pore size in 3D-interlock fabrics and validation of a predictive permeability model. Journal of Reinforced Plastics and Composites, 35(6), 471-486. Lien externe
Villalpando, F., Reggio, M., & Ilinca, A. (2016). Prediction of ice accretion and anti-icing heating power on wind turbine blades using standard commercial software. Energy, 114, 1041-1052. Lien externe
Vo, H. D., & Trépanier, J.-Y. (2016). Undergraduate Project in Compressor Rig Design, Fabrication, and Testing for Complete Engineering Training. Journal of Engineering for Gas Turbines and Power, 138(5), 13 pages. Lien externe
Wang, X., Boyer, L., Le Naveaux, F., Schwend, R. M., & Aubin, C.-É. (2016). How does differential rod contouring contribute to 3-dimensional correction and affect the bone-screw forces in adolescent idiopathic scoliosis instrumentation? Clinical Biomechanics, 39, 115-121. Lien externe
Yu, K. R., Étienne, S., Scolan, Y.-M., Hay, A., Fontaine, E., & Pelletier, D. (2016). Flow-induced vibrations of in-line cylinder arrangements at low Reynolds numbers. Journal of Fluids and Structures, 60, 37-61. Lien externe
Zadeh, F. M., Étienne, S., Chambon, R., Marleau, G., & Teyssedou, A. (2016). Effect of 3-D moderator flow configurations on the reactivity of CANDU nuclear reactors. Annals of Nuclear Energy, 99, 136-150. Lien externe
Zahedi, H., Mascle, C., & Baptiste, P. (2016). A quantitative evaluation model to measure the disassembly difficulty; application of the semi-destructive methods in aviation End-of-Life. International Journal of Production Research, 54(12), 3736-3748. Lien externe
Zizoua, C., Raison, M., Boukhenous, S., Attari, M., & Achiche, S. (2016). Detecting muscle contractions using strain gauges. Electronics Letters, 52(22), 1836-1838. Lien externe
Lévesque, M., Chassé, M. C., Mehrez, E., & Bonneville, E. (2016). Collaboration pour des équipements et expertises de recherche. (Rapport technique). Non disponible
Miao, H. Y., & Lévesque, M. (2016). Literature review on three warm surface treatment processes : warm shot peening, warm laser shock peening and warm deep rolling. (Rapport technique). Non disponible
Ahmad, O., Lombaert, H., Parent, S., Labelle, H., Dansereau, J., & Cheriet, F. (octobre 2016). Longitudinal scoliotic trunk analysis via spectral representation and statistical analysis [Communication écrite]. 1st International Workshop on Spectral and Shape Analysis in Medical Imaging (SeSAMI 2016), Athens, Greece. Lien externe
Ahmadfard, M., Bernier, M., & Kummert, M. (mai 2016). Evaluation of the design length of vertical geothermal boreholes using annual simulations combined with GenOpt [Communication écrite]. Building Performance Simulation Conference (eSim 2016), Hamilton, Ontario. Canada. Lien externe
Attendu, J.-M., & Ross, A. (août 2016). Time-domain near-field acoustical holography as a means to prevent exposition to harmful industrial impact noises [Communication écrite]. 24e Congrès international de mécanique théorique et appliquée (ICTAM 2016), Montréal, Québec. Non disponible
Bagade, P. M., Sengupta, T. K., Sengupta, S., & Vo, H. D. (décembre 2014). Frequency Dependent Capacitance SDBD Plasma Model for Flow Control [Communication écrite]. IUTAM Symposium on Advances in Computation, Modeling and Control of Transitional and Turbulent Flows, Goa, India. Lien externe
Bagade, P., Laurendeau, É., Bhole, A., Sharma, N., & Sengupta, T. K. (décembre 2014). Comparison of RANS and DNS for Transitional Flow Over WTEA-TE1 Airfoil [Communication écrite]. IUTAM Symposium on Advances in Computation, Modeling and Control of Transitional and Turbulent Flows, Goa, India. Lien externe
Baron, L. (août 2015). Kinematic analysis of a 3-PSP spatial motion platform [Communication écrite]. ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, New York (7 pages). Lien externe
Baron, L. (juin 2016). Workspace analysis of a 3-PSP motion platform [Communication écrite]. Advances in Robot Kinematics (ARK 2016), Grasse, France. Lien externe
Batailly, A., & Millecamps, A. (juin 2016). Minimising clearance consumption: a key factor for the design of blades robust to rotor/stator interactions ? [Communication écrite]. ASME Turbo Expo: Turbine Technical Conference and Exposition (GT2016), Seoul, South Korea (8 pages). Lien externe
Batailly, A., Agrapart, Q., & Millecamps, A. (juin 2016). Experimental and numerical simulation of a contact induced rotor/stator interaction inside an aircraft engine high-pressure compressor [Communication écrite]. ASME Turbo Expo: Turbine Technical Conference and Exposition (GT2016), Seoul, South Korea (10 pages). Lien externe
Batailly, A., Legrand, M., & Pierre, C. (juin 2016). Full 3D rotor/stator interaction simulations in aircraft engines with time-dependent angular speed [Communication écrite]. ASME Turbo Expo: Turbine Technical Conference and Exposition (GT2016), Seoul, South Korea (10 pages). Lien externe
Bernier, M., Kummert, M., Sansregret, S., Bourgeois, D., & Thevenard, D. (mai 2016). Teaching a building simulation course at the graduate level [Communication écrite]. Building Performance Simulation Conference (eSim 2016), Hamilton, Ontario, Canada. Lien externe
Blanchet, L., Dal Maso, F., Begon, M., Achiche, S., & Raison, M. (mai 2016). Impact of muscle modeling refinement on its kinematics and dynamics [Communication écrite]. Joint International Conference on Multibody System Dynamics (IMSD 2016), Montréal, Québec. Non disponible
Bodkhe, S., Gosselin, F., & Therriault, D. (août 2016). Effect of nanoparticle addition on the mechanical and piezoelectric properties of 3D printed PVDF [Communication écrite]. International conference of theoretical and applied mechanics (ICTAM 2016), Montréal, Québec. Lien externe
Bretin, R., Bocher, P., & Lévesque, M. (août 2016). Development of a cellular automaton for a better consideration of elastic neighborhood effect in polycrystals [Communication écrite]. 10th International Conference on Computational Methods (ICCM 2016), Berkeley, Calif.. Lien externe
Brideau, S. A., Beausoleil-Morrison, I., & Kummert, M. (mai 2016). Empirical model of a 11 kW (nominal cooling) R134a water-water heat pump [Communication écrite]. Building Performance Simulation Conference (eSim 2016), Hamilton, Ontario. Canada. Lien externe
Brischoux, P., & Bernier, M. (janvier 2016). Coupling PV/T collectors with a ground-source heat pump system in a double U-tube borehole [Communication écrite]. ASHRAE Winter Conference, Orlando, Florida, United States. Lien externe
Brischoux, P., & Bernier, M. (mai 2016). Stockage thermique résidentiel par puits géothermique [Communication écrite]. Building Performance Simulation Conference (eSim 2016), Hamilton, Ontario, Canada. Lien externe
Cimmino, M., & Baliga, B. R. (janvier 2016). Examination of two approaches for determining interfacial conduction coefficient in porous media [Communication écrite]. 4th International Conference on Computational Methods for Thermal Problems, Atlanta, GA. Non disponible
Courtois, A., Hirsekorn, M., Marcin, L., Vernet, N., Ruiz, E., & Lévesque, M. (mai 2016). Viscoelastic behavior of an epoxy resin during cure : characterization and modeling [Communication écrite]. 10th International Conference on Mechanics of Time-Dependent Materials, Paris, France. Non disponible
Dayi, O., Afsharzadeh, A., & Mascle, C. (février 2016). A Lean based process planning for aircraft disassembly [Communication écrite]. 7th IFAC Conference on Management and Control of Production and Logistics (MCPL 2016), Bremen, Germany. Publié dans IFAC-PapersOnLine, 49(2). Lien externe
De Kerret, F., Benito, I., Béguin, C., Pelletier, D., & Étienne, S. (juillet 2016). Two-phase flow pattern recognition in a varying section based on void fraction and pressure measurements [Communication écrite]. 28th IAHR Symposium on Hydraulic Machinery and Systems (IAHR 2016), Grenoble, France (10 pages). Disponible
Delbergue, D., Texier, D., Lévesque, M., & Bocher, P. (août 2016). Comparison of two X-ray residual stress measurement methods: sin2 ψ and cos α, through the determination of a martensitic steel X-ray elastic constant [Communication écrite]. 10th International Conference on Residual Stresses (ICRS10), Sydney, Australia (6 pages). Disponible
Dellacherie, S., Jamelot, E., Lafitte, O., & Mouhamad, R. (septembre 2016). Numerical results for the coupling of a simple neutronics diffusion model and a simple hydrodynamics low mach number model without coupling codes [Communication écrite]. 18th International Symposium on Symbolic and Numeric Algorithms for Scientific Computing (SYNASC 2016), Timisoara, Romania. Lien externe
Duceppe, N., Wang, X., & Aubin, C.-É. (octobre 2016). 3D biomechanical evaluation of different implant configurations in scoliosis instrumentation with apical vertebral derotation [Communication écrite]. 46e Réunion annuelle de la Société de scoliose du Québec, Estérel, QC. Non disponible
El Ouaaid, Z., Shirazi-Adl, A., & Plamondon, A. (juillet 2016). Strength, muscle activity and spinal forces in trunk maximum isometric [Communication écrite]. 19th Canadian Society for Biomechanics (CSB 2016), Hamilton, ON, Canada. Lien externe
El Ouaaid, Z., Shirazi-Adl, A., & Plamondon, A. (juillet 2016). Trunk biomechanics under loads at various orientations, heights and magnitudes [Communication écrite]. 19th Canadian Society for Biomechanics (CSB 2016), Hamilton, ON, Canada. Lien externe
El Samrout, A., Braydi, O., Younes, R., Trochu, F., & Lafon, P. (octobre 2016). A new hybrid method to solve the multi-objective optimization problem for a composite hat-stiffened panel [Communication écrite]. 6th International Conference on Metaheuristics and Nature Inspired Computing (META 2016), Marrakech, Morocco. Lien externe
Eskandari, A. H., Arjmand, N., & Shirazi-Adl, A. (juillet 2016). Subject specific kinematics-driven spine model using 2D/3D image registration [Communication écrite]. 19th Canadian Society for Biomechanics (CSB 2016), Hamilton, ON, Canada. Lien externe
Fareh, F., Demers, V., Turenne, S., & Scalzo, O. (décembre 2015). Segregation measurement of inconel 718 feedstocks used in low-pressure metal injection molding [Communication écrite]. International Conference on Advanced Materials Engineering and Technology (ICAMET 2015), Kaohsiung, Taiwan. Lien externe
Farid, G., Boukhili, R., & Vadean, A. (juillet 2016). Static and fatigue behavior multi-bolted/bonded single-lap joints in woven composite plates [Communication écrite]. 2nd International Conference on Mechanics of Composites, Porto, Portugal. Non disponible
Ferlisi, C. A., Mazzini, C.-F., Laurendeau, É., Ramasawmy, D. R., Da Ronch, A., & Stalnov, O. (janvier 2016). Case Study of Two Capstone Student Projects from Canada and the United Kingdom [Communication écrite]. 54th AIAA Aerospace Sciences Meeting (AIAA SciTech 2016), San Diego, California. Lien externe
Gagné-Boisvert, L., & Bernier, M. (juin 2016). Accounting for borehole thermal capacity when designing vertical geothermal heat exchangers [Communication écrite]. ASHRAE summer conference, St. Louis, Missouri. Non disponible
Gauthier, J. P., Giroux, A. M., Étienne, S., & Gosselin, F. (juillet 2016). CFD evaluation of added damping due to fluid flow over a hydroelectric turbine blade [Communication écrite]. 28th IAHR Symposium on Hydraulic Machinery and Systems (IAHR 2016), Grenoble, France (10 pages). Lien externe
Gervais, B., Vadean, A., Brochu, M., & Raison, M. (mai 2016). Dynamical evolution of stress distribution of a femoral orthopedic implant using multibody dynamics with finite element modeling [Communication écrite]. 4th Joint International Conference on Multibody System Dynamics (IMSD 2016), Montréal, Québec (3 pages). Non disponible
Gervais, B., Vadean, A., Brochu, M., & Raison, M. (mai 2016). Evolution of the stress distribution of a femoral orthopedic implant by combining multibody dynamics and finite element modeling [Communication écrite]. 4th Joint International Conference on Multibody System Dynamics (IMSD 2016), Montréal, Québec. Non disponible
Ghezelbash, F., Shirazi-Adl, A., Arjmand, N., El Ouaaid, Z., & Plamondon, A. (juillet 2016). Effects of curved muscles and disc positioning in trunk models on spinal loads [Communication écrite]. 19th Canadian Society for Biomechanics (CSB 2016), Hamilton, ON, Canada. Lien externe
Ghezelbash, F., Shirazi-Adl, A., Arjmand, N., El Ouaaid, Z., & Plamondon, A. (juillet 2016). Significance of scaling in the musculoskeletal modeling of the spine biomechanics [Communication écrite]. 19th Canadian Society for Biomechanics (CSB 2016), Hamilton, ON, Canada. Lien externe
Godefroy, V., Lecomte, C., Bernier, M., Douglas, M., & Armstrong, M. (janvier 2016). Experimental validation of a thermal resistance and capacity model for geothermal boreholes [Communication écrite]. ASHRAE Winter Conference, Orlando, Florida, United States. Lien externe
Golipour, A., Arjmand, N., & Shirazi-Adl, A. (juillet 2016). Estimation of spine 3D posture in reaching and lifting: Artificial neural networks [Communication écrite]. 19th Canadian Society for Biomechanics (CSB 2016), Hamilton, ON, Canada. Lien externe
Hache, N., Soudan, G., & Bernier, M. (janvier 2016). Energy use of ground-source heat pumps for various load temperatures [Communication écrite]. ASHRAE Winter Conference, Orlando, Florida, United States. Lien externe
Hached, S., Garon, A., Sawan, M., Loutochin, O., & Corcos, J. (octobre 2016). Smart artificial urinary sphincters: Implementation challenges [Communication écrite]. 59th IEEE International Midwest Symposium on Circuits and Systems (MWSCAS 2016), Abu Dhabi, United Arab Emirates (4 pages). Lien externe
Hay, A., & Pelletier, D. (janvier 2016). Adaptive time integration for separated two-phase viscous flows [Communication écrite]. 54th AIAA Aerospace Sciences Meeting (AIAA SciTech 2016), San Diego, California. Lien externe
Hay, A., Belley, C., & Pelletier, D. (janvier 2016). Multi-parametric high-order flow sensitivity analysis [Communication écrite]. 57th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, San Diego, California (18 pages). Lien externe
Hay, A., Étienne, S., & Pelletier, D. (janvier 2016). Adaptive simulation of gas-liquid interfacial flows with surface tension [Communication écrite]. 54th AIAA Aerospace Sciences Meeting (AIAA SciTech 2016), San Diego, California. Lien externe
Hay, A., Étienne, S., Pelletier, D., & Brosset, L. (juin 2016). Accurate prediction of Sloshing waves in tanks by an adaptive two-fluid incompressible front-tracking approach [Communication écrite]. 26th Annual International Ocean and Polar Engineering Conference (ISOPE 2016), Rhodes, Greece. Lien externe
Hébert, A. (septembre 2016). PyNjoy 2012 : A system for producing cross-section libraries for the DRAGON lattice code [Communication écrite]. International Conference on Nuclear Data for Science and Technology (ND 2016), Bruges, Belgium (9 pages). Lien externe
Hébert, A., & Marleau, G. (mai 2016). DRAGON5 Workshop [Communication écrite]. Physics of Reactors (PHYSOR 2016): Unifying Theory and Experiments in the 21st Century, Sun Valley, Idaho. Non disponible
Hernandez, S., Leroux, M., Achiche, S., & Raison, M. (mai 2016). Based Learning involving physical prototypes to support the teaching of multibody modeling applied to the human body [Communication écrite]. Joint International Conference on Multibody System Dynamics (IMSD 2016), Montréal, Québec. Non disponible
Hernandez, S., Leroux, M., Achiche, S., & Raison, M. (mai 2016). Project Based Learning involving physical prototypes to support the teaching of multibody modeling applied to the human body [Communication écrite]. Joint International Conference on Multibody System Dynamics (IMSD 2016), Montréal, Québec. Non disponible
Hoarau, Y., Pena, D., Vos, J. B., Charbonier, D., Gehri, A., Braza, M., Deloze, T., & Laurendeau, É. (janvier 2016). Recent Developments of the Navier Stokes Multi Block (NSMB) CFD solver [Communication écrite]. 54th AIAA Aerospace Sciences Meeting (AIAA SciTech 2016), San Diego, California. Lien externe
Hosseinimanesh, H., Devals, C., Nennemann, B., Reggio, M., & Guibault, F. (juillet 2016). Unsteady simulation for Francis Turbine during load rejection events [Communication écrite]. ASME Fluids Engineering Division Summer Meeting (FEDSM 2016), Washington, DC, United states (10 pages). Lien externe
Jeandin, T., & Mascle, C. (septembre 2015). A new model to select fasteners in design for disassembly [Communication écrite]. 13th Global Conference on Sustainable Manufacturing : Decoupling Growth from Resource Use, Binh Dong New City, Vietnam. Publié dans Procedia CIRP, 40. Disponible
Kummert, M. (octobre 2016). Using TRNSYS in a graduate course on solar energy engineering [Communication écrite]. 11th ISES EuroSun Conference, Palma, Spain (12 pages). Lien externe
Lalande, V., Villemure, I., Parent, S., & Aubin, C.-É. (octobre 2016). Évaluation expérimentale des forces appliquées sur les plaques de croissance par un dispositif de compression antérieure sans fusion : résultats préliminaires [Communication écrite]. 46e réunion de la Société de scoliose du Québec (SSQ), Estérel, Québec, Canada. Non disponible
Lapointe, F. L., Oswald, A., Nakai, A., & Laberge Lebel, L. (juin 2016). Manufacturing of carbon/polyamide beam by vacuum assisted pultrusion [Communication écrite]. 17th European Conference on Composite Materials (ECCM 2016), Munich, Germany. Lien externe
Lapointe, F., Oswald, A., & Laberge Lebel, L. (août 2016). Manufacturing of thermoplastic composite rods using vacuum assisted pultrusion [Communication écrite]. Canada-Japan-Vietnam Workshop on Composites, Ho Chi Minh City, Vietnam. Lien externe
Larouche-Guilbert, M., Barron, O., Achiche, S., & Raison, M. (mai 2016). Real-time assessment of muscle forces based on multibody dynamics and electromyography [Communication écrite]. Joint International Conference on Multibody System Dynamics (IMSD 2016), Montréal, Québec. Non disponible
Leclaire, S., Abahri, K., Belarbi, R., Latt, J., Chopard, B., & Bennacer, R. (mai 2016). A geometrical approach for simulating multiphase flow static contact angles with a lattice Boltzmann method [Communication écrite]. International Conference on Materials & Energy, La Rochelle, France. Non disponible
Leclaire, S., Parmigiani, A., Malaspinas, O., Chopard, B., & Latt, J. (janvier 2016). Lattice Boltzmann method for simulating immiscible two-phase flows in porous media [Communication écrite]. MATHIAS-Total, Marne-la-Vallée, France. Non disponible
Lecomte, C., & Bernier, M. (mai 2016). Modélisation et simulation de puits géothermiques en série pour stockage saisonnier [Communication écrite]. Building Performance Simulation Conference (eSim 2016), Hamilton, Ontario, Canada. Lien externe
Leroux, M., Beaini, D., Achiche, S., & Raison, M. (mai 2016). Revisiting the Agile eye using Euler-Lagrange Formalism and Torque Control [Communication écrite]. Joint International Conference on Multibody System Dynamics (IMSD 2016), Montréal, Québec. Non disponible
Letarte, A., Joncas, S., Ross, A., & Martin, F. (janvier 2016). Evaluating the stiffness of conic interfacing parts : a practical method for finite element model updating based on experimental modal testing [Communication écrite]. 57th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference (AIAA SciTech 2016), San Diego, CA. Lien externe
Madra, A., Trochu, F., & Breitkopf, P. (juin 2016). An optimized model of dual-scale geometry of textile reinforcement based on X-ray microtomography for modeling of RTM processes [Communication écrite]. European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2016), Crete Island, Greece. Lien externe
Mahdavi, H., Abderrafai, Y., Piccirelli, N., Pautard, S., & Therriault, D. (juillet 2016). Anisotropic properties of 3D printed nylon by fused deposition modelling technique [Communication écrite]. 6th International conference on engineering and applied sciences (ICEAS 2016), Vancouver, Canada. Non disponible
Marouane, H., Shirazi-Adl, A., & Adouni, M. (mars 2016). Determination of knee contact centers and contact forces during gait: Evaluation of existing techniques [Communication écrite]. ORS 2016 Annual Meeting, Orlando, Florida. Non disponible
Marouane, H., Shirazi-Adl, A., & Adouni, M. (juillet 2016). A hybrid computational musculoskeletal model of the lower extremity in gait [Communication écrite]. 19th Canadian Society for Biomechanics (CSB 2016), Hamilton, ON, Canada. Lien externe
McDowell, T. P., & Kummert, M. (août 2016). Estimating sub-hourly solar radiation and effective sky temperature from hourly weather data [Communication écrite]. ASHRAE/IBPSA-USA Building Simulation Conference: Building Performance Modeling (SimBuild 2016), Salt Lake City, UT, USA. Lien externe
Ménard, A.-L., Grimard, G., Massol, É., Londono, I., Moldovan, F., & Villemure, I. (mars 2016). Le retrait de compression dynamique permet la reprise de croissance osseuse en préservant l'intégrité du disque intervertébral : Étude in vivo sur les rats [Communication écrite]. Journée scientifique du RSBO 2016, Montréal, Québec. Non disponible
Michel, A., Kaabi, A., & Vadean, A. (juillet 2016). Design improvement study of scarf repair for composite structures [Communication écrite]. 2nd International Conference on Mechanics of Composites, Porto, Portugal. Non disponible
Monnot, P., Levesque, J., Vermeersch, O., & Laberge Lebel, L. (mai 2016). Automated braiding of dry preforms for aerospace structural components [Communication écrite]. SAMPE Long Beach 2016 Conference and Exhibition, Long Beach, CA, United states. Lien externe
Monzó, P., Bernier, M., Acuña, J., & Mogensen, P. (janvier 2016). A Monthly Based Bore Field Sizing Methodology with Applications to Optimum Borehole Spacing [Communication écrite]. ASHRAE Winter Conference 2016, Orlando, Florida. Publié dans ASHRAE Transactions, 122(Part 1). Non disponible
Morada, G., Marouene, A., Vadean, A., & Boukhili, R. (août 2016). Numerical analysis on compression failure mechanisms of impacted non-crimp fabric reinforced composites [Communication écrite]. 24th International Congress of Theoretical and Applied Mechanics (ICTAM 2016), Montréal, Québec. Lien externe
Mureithi, N. W., Cucuel, B., Saber-Cherif, K., Olala, S., & Ashrafi, F. (juillet 2016). Characteristics of turbulence and drag forces on foreign objects in tube arrays [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2016), Vancouver, British Columbia. Lien externe
Mustafy, T., Benoit, A., Londono, I., Moldovan, F., & Villemure, I. (juillet 2016). In-Vivo micro-CT study on bone morphology or growing rats: radiation effects [Communication écrite]. ESB Annual Congress, Lyon, France. Lien externe
Mustafy, T., Benoit, A., Londono, I., Moldovan, F., & Villemure, I. (mars 2016). Radiation effects on bone architecture in adolescent rats resulting from in vivo micro-ct scanning [Communication écrite]. Journée scientifique du RSBO 2016, Montréal, Québec. Non disponible
Nabatian, N., & Mureithi, N. W. (juillet 2016). Bifurcation analysis and the role of normal form symmetries on the harmonic forced inline oscillation of the cylinder wake [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2016), Vancouver, British Columbia. Lien externe
Ortensi, J., Wang, Y., Baker, B., Schunert, S., Gleicher, F. N., DeHart, M. D., Laurier, A., & Hébert, A. (mai 2016). Preparation of a Neutron Transport Data Set for Simulations of the Transient Test Reactor Facility [Communication écrite]. Physics of Reactors (PHYSOR 2016), Sun Valley, ID. Non disponible
Oswald, A., Lapointe, F. L., & Laberge Lebel, L. (juin 2016). Multi-die, vacuum assisted pultrusion of flax/PLA thermoplastic biocomposite rods [Communication écrite]. 17th European Conference on Composite Materials (ECCM 2016), Munich, Germany. Lien externe
Ouadday, R., Kaabi, A., Boukhili, R., & Vadean, A. (août 2016). Effect of alumina trihydrate concentration on physical and mechanical properties of ATH/vinylester composite [Communication écrite]. 24th International Congress of Theoretical and Applied Mechanics (ICTAM 2016), Montréal, Québec. Lien externe
Ouadday, R., Kaabi, A., Boukhili, R., & Vadean, A. (août 2016). Effect of alumina trihydrate particle size on physical and mechanical properties of ATH/vinylester composite [Communication écrite]. 24th International Congress of Theoretical and Applied Mechanics, Montréal, Québec. Non disponible
Parmigiani, A., Huber, C., Bachmann, O., & Leclaire, S. (avril 2016). Why are plutons dry? Outgassing mechanisms of crustal magmatic bodies [Communication écrite]. EGU General Assembly 2016, Vienna, Austria. Non disponible
Pignet, S., Bernard, F., Salino, V., Taforeau, J., Hébert, A., & Bruneau, A. (mai 2016). The IRSN Orion project: development of new capabilities for neutronics deterministic simulations dedicated to safety analysis [Communication écrite]. Physics of Reactors (PHYSOR 2016), Sun Valley, Idaho. Non disponible
Piollet, E., Laroche, S., Bianki, M.-A., & Ross, A. (août 2016). A mobile reverberation cabin for acoustic measurements in an existing anechoic room [Communication écrite]. 45th International Congress and Exposition on Noise Control Engineering: Towards a Quieter Future (INTER-NOISE 2016), Hamburg, Germany. Non disponible
Rak, M., & Woźniak, A. (septembre 2015). Systematic errors of measurements on a measuring arm equipped with a laser scanner on the results of optical measurements [Communication écrite]. 11th International Conference on Mechatronics, Warsaw, Poland. Lien externe
Ren, Q., Achiche, S., Jemielniak, K., & Bigras, P. (juillet 2016). An Enhanced Adaptive Neural Fuzzy Tool Condition Monitoring for Turning Process [Communication écrite]. IEEE International Conference on Fuzzy Systems (FUZZ 2016), Vancouver, B.C.. Lien externe
Renaud, J., Ruiz, E., & Laberge Lebel, L. (mai 2016). Preforming of 3D carbon interlock fabrics for the manufacturing of composite parts with the flexible injection process [Communication écrite]. SAMPE Long Beach 2016 Conference and Exhibition, Long Beach, CA, United states. Lien externe
Rimpault, X., Chatelain, J.-F., Sapieha, J.-E., & Balazinski, M. (mai 2016). Fractal Analysis of Cutting Force and Acoustic Emission Signals During CFRP Machining [Communication écrite]. 7th CIRP Conference on High Performance Cutting (HPC 2016), Chemnitz, Germany. Publié dans Procedia CIRP, 46. Lien externe
Robert, É., & Thomas, M. (juin 2015). Numerical Investigation of a Confined Jet Array Penetrating into a Counterflow [Communication écrite]. 5th International Conference on Jets, Wakes and Separated Flows (ICJWSF 2015), Stockholm, Sweden. Lien externe
Ruiz, E., Courteau-Godmaire, H., Fotsing, R., Billotte, C., & Lévesque, M. (juin 2016). Experimental and numerical analysis of defects in composite panels used in business aircrafts interior [Communication écrite]. 8th International Conference on Times of Polymers and Composites: from Aerospace to Nanotechnology, Naples, Italy (4 pages). Lien externe
Salino, V., & Hébert, A. (mai 2016). On steady-state multiphysics stability and related in-core fuel management capabilities in DONJON5 [Communication écrite]. Physics of Reactors (PHYSOR 2016), Sun Valley, ID. Non disponible
Schmidt, H., Shirazi-Adl, A., Schilling, C., & Dreischarf, M. (juillet 2016). Influence of preload on intervertebral disc stiffness in loading-unloading cycles of compression [Communication écrite]. 22nd Congress of the European Society of Biomechanics, Lyon, France. Lien externe
Silvant, S., Gaudart, G., Huguenot, P., Kieffel, Y., Perret, M., Robin-Jouan, P., Vigouroux, D., Fray, R., Cressault, Y., Teulet, P., & Trépanier, J.-Y. (août 2016). Detailed analysis of live tanks and GIS circuit breakers using a new environmental friendly gas [Communication écrite]. International Council on Large Electric Systems (CIGRE Session 46), Paris, France. Lien externe
Therriault, D. (février 2016). 3D printing of multifunctional composites and polymers [Communication écrite]. Gordon Research Conference, Symposium on Multifunctional materials, Ventura, USA. Non disponible
Wang, X., Larson, A. N., Crandall, D. G., Parent, S., Labelle, H., Ledonio, C. G. T., & Aubin, C.-É. (octobre 2016). Does variation in pedicle screw pattern affect deformity correction and bone-screw forces in adolescent idiopathic scoliosis instrumentation using polyaxial screws with dorsal height adjustability? [Communication écrite]. 46e Réunion annuelle de la Société de scoliose du Québec, Estérel, QC. Non disponible
Wen, J., Blanchet, L., Dal Maso, F., Achiche, S., & Raison, M. (mai 2016). Towards the identification of the most realistic strategy of muscle force distribution during movement cycles [Communication écrite]. Joint International Conference on Multibody System Dynamics (IMSD 2016), Montréal, Québec. Non disponible
Younsi, R., & Detuncq, B. (juillet 2016). Using experimental investigation for educational purposes: two-stage compressor [Communication écrite]. 8th International Conference on Education and New Learning Technologies (EDULEARN 2016), Barcelona, Spain. Lien externe
Zimmermann, E. A., Londono, I., Moldovan, F., & Villemure, I. (mars 2016). In-situ cellular biomechanics under stress-controlled static vs. dynamic compression of growth plates [Communication écrite]. Journée scientifique du RSBO 2016, Montréal, Québec. Non disponible
Zou, S., Therriault, D., & Gosselin, F. (août 2016). Unfolding process of coiling fibers fabricated by instability-assisted fused deposition modeling [Communication écrite]. International conference of theoretical and applied mechanics (ICTAM 2016), Montréal, Québec. Lien externe
Abderrafai, Y., Barthelat, F., & Therriault, D. (août 2016). Design and 3D printing of polymer/ceramic composite structures [Affiche]. International conference of theoretical and applied mechanics (ICTAM 2016), Montréal, Québec. Non disponible
Marouane, H., Shirazi-Adl, A., Adouni, M., & Hashemi, J. (mars 2016). 2D versus 3D estimation of knee joint muscle and contact forces in gait [Affiche]. ORS 2016 Annual Meeting, Orlando, Florida. Lien externe
Xu, C., Bouchemit, A., L'Espérance, G., Laberge Lebel, L., & Therriault, D. (août 2016). Three-dimensional direct-write printing of metallic microstructures [Affiche]. International conference of theoretical and applied mechanics (ICTAM 2016), Montréal, Québec. Non disponible
Huber, C., Parmigiani, A., Degruyter, W., Bachmann, O., & Leclaire, S. (décembre 2016). Volatile transport in subvolcanic magma reservoirs [Résumé]. American Geophysical Union Fall Meeting 2016, San Francisco, Calif.. Non disponible
Bouscarrat, D., Flipon, B., Vieille, B., Lévesque, M., Barbe, F., & Gautrelet, C. (mai 2016). Influence of time-dependent behaviors on the determination of the critical strain energy release rate Gₗc of woven-ply carbon fibers polyphenylene sulfide thermoplastic composites at high temperature [Présentation]. Dans 10th International Conference on the Mechanics of Time Dependent Materials, Paris, France. Non disponible
Raison, M. (janvier 2017). Analysis of walking clinic and decomposition of reaction forces of the floor under the feet North and South America workshop on clinical gait analysis [Présentation]. Dans North and South America workshop on clinical gait analysis (SER 2017), San Juan, Puerto Rico. Non disponible
Raison, M. (juin 2016). What does DHM, Biomechanics and Robotics have in common? [Présentation]. Dans 4th International Digital Human Modeling Symposium (DHM2016), Montréal, Québec, Canada. Non disponible
Afsharzadeh, A. (2016). Automatic Disassembly Task Sequence Planning of Aircrafts at their End-of-Life [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Beaudoux, P. (2016). Décollement mobile dans les écoulements bidimensionnels et instationnaires [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Benito, I. (2016). Identification des configurations d'un écoulement diphasique dans un faisceau de tubes à l'aide d'une machine à vecteurs de support [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Bonnard, B. (2016). Étude expérimentale de la porosité des renforts utilisés dans les matériaux composites [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Bousquet-Jetté, C. (2016). Analyse de scène rapide utilisant la vision et l'intelligence artificielle pour la préhension d'objets par un robot d'assistance [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Brischoux, P. (2016). Stockage thermique saisonnier par puits géothermiques pour bâtiments résidentiels équipés de panneaux photovoltaïques-thermiques [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Cappato, R. (2016). Simulation numérique des instabilités rotor stator dans une turbine hydraulique avec Foam-Extend [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Carmona, J.-P. (2016). Design of Small Structural Titanium Aeronautic Parts Made by Laser Powder Bed Fusion [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
De Kerret, F. (2016). Étude expérimentale des écoulements eau-air à haut taux de vide dans les faisceaux de tubes [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Deschênes, P.-A. (2016). Comportement des fissures de fatigue dans un champ de contraintes résiduelles de tension [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Duquette, O. (2016). Conception d'une micro-pompe sanguine [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Ellyson, B. (2016). Étude du comportement en fatigue vibratoire de l'alliage de titane TI-6Al-4V produit par fabrication additive [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Frigo, J.-B. (2016). Étude 3D de l'apparition du galop en rotation sur des corps épais [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Garapin, J. (2016). Modélisation non linéaire du galop en rotation pour des cylindres rectangulaires [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Gaudet, G. (2016). Classification de mouvements fantômes du membre supérieur chez des amputés huméraux à l'aide de mesures électromyographiques et cinématiques [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Hely, C. (2016). Planification de trajectoires pour placement automatisé de fibres sur surfaces de géométries complexes [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Kamali Zadeh, S. (2016). Initial Tool Wear Mechanisms in Turning of Titanium Metal Matrix Composites [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Lapointe, M.-O. (2016). Évaluation des propriétés mécaniques du tissu cardiaque par échocardiographie [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Lecomte, C. (2016). Modélisation de champs de puits géothermiques en série pour un stockage thermique saisonnier [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Li, H. (2016). Development of a Time Delay Formulation for Fluidelastic Instability Model [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Li, X. (2016). Méthodologie d'optimisation des profils de vitesse à l'entrée des aspirateurs de turbines hydrauliques [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Maltais Larouche, S. (2016). Détection de faute automatique dans les systèmes solaires thermiques basée sur la vérification de règles et la simulation [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Marcotte, B. (2016). Étude du transfert thermique transitoire dans les puits géothermiques à quatre tuyaux [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Martinez, G. (2016). Étude et prédiction numérique des modes d'écoulement à travers un renfort fibreux à double échelle de porosité [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Méndez Romero, J. A. (2016). Experimental and Numerical Study of Needle Peening Effects in Aluminium Alloy 2024-T3 Sheets [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Moulin, A. (2016). Simulation numérique par la méthode des éléments spectraux des vibrations induites par relâcher tourbillonnaire [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Oswald, A. (2016). Pultrusion multi-filière assistée par le vide de LIN/PLA [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Piaget, D. (2016). Comparaison de la qualité des simulations d'écoulements visqueux turbulents sur différents maillages d'hexaèdres [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Sansas, F. (2016). Simulation numérique de la dynamique d'une structure élancée flexible dans un écoulement de fluide compressible [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Vallières, M.-C. (2016). Validation d'un modèle unidimensionnel pour l'étude d'un écoulement instationnaire dans une turbine [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Wasselet, M. (2016). Calcul des forces et moments sur des corps immergés par la méthode des éléments spectraux [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Xing, J. (2016). Modélisation numérique d'un actionneur plasma de type décharge à barrière diélectrique par la méthode de dérive-diffusion [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Basha, M. (2016). The Mechanical Buckling Behaviour of Composite Sandwich Structure Made from Hybrid Glass/Carbon Face Sheets and Rigid Foam Core [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Belzile, B. (2016). Mesure tactile proprioceptive pour des doigts sous-actionnés [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Delisle, V. (2016). Experimental Performance Characterization and Modeling of Photovoltaic-Thermal Systems for Integration in High Performance Residential Buildings [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Djeghri, N. (2016). Stall Margin Prediction and Improvement for Mixed Flow Compressors [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Falsafioon, M. (2016). Moving Grids in Complex Configurations [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Gallay, S. (2016). Algorithmes de couplage RANS et écoulement potentiel [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Hadji, A. (2016). Modèles non linéaires pour l'interaction tube-support [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Hassani, M. (2016). Elastic Reconfiguration of Bending and Twisting Rods in Air Flow [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Hosseinimanesh, H. (2016). 3D Numerical Modeling of Transient Conditions in Francis Turbines [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Iliescu, L. E. (2016). The Development of an Intelligent Health Monitoring System for Micrometeoroid and Space Debris Protection Systems and Spacecraft Structural Components [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Le Naveaux, F. (2016). Biomécanique des configurations d'instrumentation chirurgicale de la scoliose idiopathique de l'adolescence [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Lebel, L. (2016). Fissuration d'un composite à matrice céramique dans une application de pièce statique de turbine à gaz [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Miron, P. (2016). Étude du décollement mobile dans les écoulements tourbillonnaires [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Olala, S. O. (2016). Streamwise Fluidelastic Instability of Tube Arrays Subjected to Two-Phase Flow [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Pena, D. (2016). Développement d'un code de givrage tridimensionnel avec méthode Level-set [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Rahman, M. M. (2016). Calibration of Machine Tools Using on Machine Probing of an Indigenous Artefact [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Rak, M. B. (2016). Fusion of High Density Low Precision and Low Density High Precision Data in Coordinate Metrology [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Renaud, J. (2016). Préformage de tissus 3D interlock de carbone pour la fabrication de composites en injection flexible [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Rimpault, X. (2016). Tool Condition Monitoring and Surface Topography Analysis During the Machining of CFRP Composites [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Sabaghi, M. (2016). Design for Disassembly and Sustainability Assessment to Support Aircraft End-of-Life Treatment [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Salazar Padron, F. A. (2016). Study of Symmetry-Breaking Instabilities in Axisymmetric Geometries [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Zahedi, H. (2016). End-of-Life Efficient Disassembly of Complex Structures Using Product and Process Focused Approach [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Aubin, C.-É., Sarwark, J. F., Schmid Dionne, E., & Parent, S. (2016). Fusionless vertebral physeal device. (Brevet no US9393058). Lien externe
Garon, A., & Carrier, M. (2016). Drain catheter. (Brevet no US9381330). Lien externe
Vo, H. D., Cevik, M., & Erler, E. (2016). Compressor casing. (Demande de brevet no US20160040546). Lien externe
Basta, I., Mayer, J. R. R., & Baron, L. (février 2016). The Octoball: an artefact for additive manufacturing precision assessment [Autre type de communication de conférence]. International Academy for Production Engineering (CIRP) Winter Meeting, STC-P Meeting, Paris, France (41 pages). Disponible
Birglen, L. (2016). Mécatronique : cours avec exercices corrigés. Non disponible
Hébert, A. (2016). Applied Reactor Physics. (2e éd.). Non disponible
Younsi, R., & Detuncq, B. (2016). Systèmes de pompage ventilation et compression: Théorie et application. Lien externe
Dagenais, M., Deschênes, J., McDonald, M., Baptiste, P., Mascle, C., Legros, R., Spreutels, L., Marinova, M., Perrier, M., & Frayret, J.-M. (2016). Les stratégies de circularité des ressources. Dans Sauvé, S., Normandin, D., & McDonald, M. (édit.), L'économie circulaire : une transition incontournable (p. 37-63). Lien externe
Spitler, J. D., & Bernier, M. (2016). Vertical borehole ground heat exchanger design methods. Dans Advances in ground-source heat pump systems (p. 29-61). Lien externe
Thiriet, M., Sheu, W.-H., & Garon, A. (2016). Biofluid flow and heat transfer. Dans Handbook of Fluid Dynamics (2e éd., 30.1-30.28). Lien externe
