![]() | Up a level |
Abderrafai, Y., Barthelat, F., & Therriault, D. (2016, August). Design and 3D printing of polymer/ceramic composite structures [Poster]. International conference of theoretical and applied mechanics (ICTAM 2016), Montréal, Québec. Unavailable
Achiche, S., & Tomiyama, T. (2016). Design of Multidisciplinary Cyber Physical Systems. Journal of Integrated Design and Process Science, 19(3), 3 pages. External link
Achiche, S., Shlechtingen, M., Raison, M., Baron, L., & Santos, I. F. (2016). Adaptive Neuro-Fuzzy Inference System Models for Force Prediction of a Mechatronic Flexible Structure. Journal of Integrated Design & Process Science, 19(3), 77-94. External link
Adouni, M., Shirazi-Adl, A., & Marouane, H. (2016). Role of gastrocnemius activation in knee joint biomechanics: gastrocnemius acts as an ACL antagonist. Computer Methods in Biomechanics and Biomedical Engineering, 19(4), 376-385. External link
Afsharzadeh, A. (2016). Automatic Disassembly Task Sequence Planning of Aircrafts at their End-of-Life [Master's thesis, École Polytechnique de Montréal]. Available
Ahmad, O., Lombaert, H., Parent, S., Labelle, H., Dansereau, J., & Cheriet, F. (2016, October). Longitudinal scoliotic trunk analysis via spectral representation and statistical analysis [Paper]. 1st International Workshop on Spectral and Shape Analysis in Medical Imaging (SeSAMI 2016), Athens, Greece. External link
Ahmadfard, M., Bernier, M., & Kummert, M. (2016, May). Evaluation of the design length of vertical geothermal boreholes using annual simulations combined with GenOpt [Paper]. Building Performance Simulation Conference (eSim 2016), Hamilton, Ontario. Canada. External link
Akcayoz, E., Vo, H. D., & Mahallati, A. (2016). Controlling corner stall separation with plasma actuators in a compressor cascade. Journal of Turbomachinery, 138(8), 13 pages. External link
Alloui, Z., & Vasseur, P. (2016). Natural convection in tall and shallow porous rectangular enclosures heated from below. Computational Thermal Sciences, 8(2), 163-176. External link
Amrei, M. M., Monajati, H., Thibault, D., Verreman, Y., & Bocher, P. (2016). Effects of Various Post-Weld Heat Treatments on Austenite and Carbide Formation in a 13Cr4Ni Steel Multipass Weld. Metallography, Microstructure, and Analysis, 5(1), 50-61. External link
Amrei, M. M., Monajati, H., Thibault, D., Verreman, Y., Germain, L., & Bocher, P. (2016). Microstructure characterization and hardness distribution of 13Cr4Ni multipass weld metal. Materials Characterization, 111, 128-136. External link
Aramesh, M., Attia, M. H., Kishawy, H. A., & Balazinski, M. (2016). Estimating the remaining useful tool life of worn tools under different cutting parameters: A survival life analysis during turning of titanium metal matrix composites (Ti-MMCs). CIRP Journal of Manufacturing Science and Technology, 12, 35-43. External link
Aramesh, M., Shaban, Y., Yacout, S., Attia, M. H., Kishawy, H. A., & Balazinski, M. (2016). Survival life analysis applied to tool life estimation with variable cutting conditions when machining titanium metal matrix composites (Ti-MMCs). Machining Science and Technology, 20(1), 132-147. External link
Ashrafi, F., Michaud, M., & Vo, H. D. (2016). Delay of rotating stall in compressors using plasma actuators. Journal of Turbomachinery, 138(9), 12 pages. External link
Attendu, J.-M., & Ross, A. (2016, August). Time-domain near-field acoustical holography as a means to prevent exposition to harmful industrial impact noises [Paper]. 24e Congrès international de mécanique théorique et appliquée (ICTAM 2016), Montréal, Québec. Unavailable
Aubin, C.-É., Labelle, H., Arnoux, P. J., Parent, S., Wang, W., Baran, G., & Cahill, P. (2016). Biomechanics of high-grade spondylolisthesis with and without reduction. Medical & Biological Engineering & Computing, 54(4), 619-628. External link
Aubin, C.-É., Sarwark, J. F., Schmid Dionne, E., & Parent, S. (2016). Fusionless vertebral physeal device. (Patent no. US9393058). External link
Bagade, P. M., Sengupta, T. K., Sengupta, S., & Vo, H. D. (2014, December). Frequency Dependent Capacitance SDBD Plasma Model for Flow Control [Paper]. IUTAM Symposium on Advances in Computation, Modeling and Control of Transitional and Turbulent Flows, Goa, India. External link
Bagade, P., Laurendeau, É., Bhole, A., Sharma, N., & Sengupta, T. K. (2014, December). Comparison of RANS and DNS for Transitional Flow Over WTEA-TE1 Airfoil [Paper]. IUTAM Symposium on Advances in Computation, Modeling and Control of Transitional and Turbulent Flows, Goa, India. External link
Ballaz, L., Raison, M., Detrembleur, C., Gaudet, G., & Lemay, M. (2016). Joint torque variability and repeatability during cyclic flexion-extension of the elbow. BMC Sports Science, Medicine and Rehabilitation, 8. Available
Baron, L. (2015, August). Kinematic analysis of a 3-PSP spatial motion platform [Paper]. ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, New York (7 pages). External link
Baron, L. (2016, June). Workspace analysis of a 3-PSP motion platform [Paper]. Advances in Robot Kinematics (ARK 2016), Grasse, France. External link
Basha, M. (2016). The Mechanical Buckling Behaviour of Composite Sandwich Structure Made from Hybrid Glass/Carbon Face Sheets and Rigid Foam Core [Ph.D. thesis, École Polytechnique de Montréal]. Available
Basta, I., Mayer, J. R. R., & Baron, L. (2016, February). The Octoball: an artefact for additive manufacturing precision assessment [Other]. International Academy for Production Engineering (CIRP) Winter Meeting, STC-P Meeting, Paris, France (41 pages). Available
Batailly, A., & Millecamps, A. (2016, June). Minimising clearance consumption: a key factor for the design of blades robust to rotor/stator interactions ? [Paper]. ASME Turbo Expo: Turbine Technical Conference and Exposition (GT2016), Seoul, South Korea (8 pages). External link
Batailly, A., Agrapart, Q., & Millecamps, A. (2016, June). Experimental and numerical simulation of a contact induced rotor/stator interaction inside an aircraft engine high-pressure compressor [Paper]. ASME Turbo Expo: Turbine Technical Conference and Exposition (GT2016), Seoul, South Korea (10 pages). External link
Batailly, A., Agrapart, Q., Millecamps, A., & Brunel, J.-F. (2016). Experimental and numerical simulation of a rotor/stator interaction event localized on a single blade within an industrial high-pressure compressor. Journal of Sound and Vibration, 375, 308-331. External link
Batailly, A., Legrand, M., & Pierre, C. (2016, June). Full 3D rotor/stator interaction simulations in aircraft engines with time-dependent angular speed [Paper]. ASME Turbo Expo: Turbine Technical Conference and Exposition (GT2016), Seoul, South Korea (10 pages). External link
Beaudoux, P. (2016). Décollement mobile dans les écoulements bidimensionnels et instationnaires [Master's thesis, École Polytechnique de Montréal]. Available
Béguin, C., Pelletier, E., & Étienne, S. (2016). Void fraction influence on added mass in a bubbly flow. European Journal of Mechanics - B/Fluids, 56, 28-45. External link
Bejjani, R., Balazinski, M., Attia, H., Plamondon, P., & L'Espérance, G. (2016). Chip formation and microstructure evolution in the adiabatic shear band when machining titanium metal matrix composites. International Journal of Machine Tools and Manufacture, 109, 137-146. External link
Belzile, B. (2016). Mesure tactile proprioceptive pour des doigts sous-actionnés [Ph.D. thesis, École Polytechnique de Montréal]. Available
Belzile, B., & Birglen, L. (2016). Stiffness analysis of underactuated fingers and its application to proprioceptive tactile sensing. IEEE/ASME Transactions on Mechatronics, 21(6), 2672-2681. External link
Benito, I. (2016). Identification des configurations d'un écoulement diphasique dans un faisceau de tubes à l'aide d'une machine à vecteurs de support [Master's thesis, École Polytechnique de Montréal]. Available
Benoit, A., Mustafy, T., Londono, I., Grimard, G., Aubin, C.-É., & Villemure, I. (2016). In vivo dynamic compression has less detrimental effect than static compression on newly formed bone of a rat caudal vertebra. Journal of Musculoskeletal & Neuronal Interactions, 16(3), 211-220. External link
Bercegol, A., Christophe, V., Keshavarz, M. K., Vasilevskiy, D., Turenne, S., & Masut, R. A. (2016). Hot extruded polycrystalline Mg₂Si with embedded XS₂ nano-particles (X: Mo, W). Journal of Electronic Materials, 46(5), 2668-2675. External link
Bernier, M., Kummert, M., Sansregret, S., Bourgeois, D., & Thevenard, D. (2016, May). Teaching a building simulation course at the graduate level [Paper]. Building Performance Simulation Conference (eSim 2016), Hamilton, Ontario, Canada. External link
Bianco, R. J., Aubin, C.-É., Mac-Thiong, J. M., Wagnac, E., & Arnoux, P. J. (2016). Pedicle Screw Fixation Under Nonaxial Loads: A Cadaveric Study. Spine, 41(3), E124-E130. External link
Birglen, L. (2016). Mécatronique : cours avec exercices corrigés. Unavailable
Bitar-Nehme, E., & Mayer, J. R. R. (2016). Thermal volumetric effects under axes cycling using an invar R-test device and reference length. International Journal of Machine Tools and Manufacture, 105, 14-22. External link
Blanchet, L., Dal Maso, F., Begon, M., Achiche, S., & Raison, M. (2016, May). Impact of muscle modeling refinement on its kinematics and dynamics [Paper]. Joint International Conference on Multibody System Dynamics (IMSD 2016), Montréal, Québec. Unavailable
Bodkhe, S., Gosselin, F., & Therriault, D. (2016, August). Effect of nanoparticle addition on the mechanical and piezoelectric properties of 3D printed PVDF [Paper]. International conference of theoretical and applied mechanics (ICTAM 2016), Montréal, Québec. External link
Bonnard, B. (2016). Étude expérimentale de la porosité des renforts utilisés dans les matériaux composites [Master's thesis, École Polytechnique de Montréal]. Available
Bouscarrat, D., Flipon, B., Vieille, B., Lévesque, M., Barbe, F., & Gautrelet, C. (2016, May). Influence of time-dependent behaviors on the determination of the critical strain energy release rate Gₗc of woven-ply carbon fibers polyphenylene sulfide thermoplastic composites at high temperature [Presentation]. In 10th International Conference on the Mechanics of Time Dependent Materials, Paris, France. Unavailable
Bousquet-Jetté, C. (2016). Analyse de scène rapide utilisant la vision et l'intelligence artificielle pour la préhension d'objets par un robot d'assistance [Master's thesis, École Polytechnique de Montréal]. Available
Brahimi, T., Saeed, F., & Paraschivoiu, I. (2016). Aerodynamic models for the analysis of vertical axis wind turbines (VAWTs). International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 10(1), 203-209. External link
Bretin, R., Bocher, P., & Lévesque, M. (2016, August). Development of a cellular automaton for a better consideration of elastic neighborhood effect in polycrystals [Paper]. 10th International Conference on Computational Methods (ICCM 2016), Berkeley, Calif.. External link
Brideau, S. A., Beausoleil-Morrison, I., Kummert, M., & Wills, A. (2016). Inter-model comparison of embedded-tube radiant floor models in BPS tools. Journal of Building Performance Simulation, 9(2), 190-209. External link
Brischoux, P. (2016). Stockage thermique saisonnier par puits géothermiques pour bâtiments résidentiels équipés de panneaux photovoltaïques-thermiques [Master's thesis, École Polytechnique de Montréal]. Available
Brischoux, P., & Bernier, M. (2016, January). Coupling PV/T collectors with a ground-source heat pump system in a double U-tube borehole [Paper]. ASHRAE Winter Conference, Orlando, Florida, United States. External link
Brischoux, P., & Bernier, M. (2016, May). Stockage thermique résidentiel par puits géothermique [Paper]. Building Performance Simulation Conference (eSim 2016), Hamilton, Ontario, Canada. External link
Bruna-Rosso, C., Arnoux, P. J., Bianco, R. J., Godio-Raboutet, Y., Fradet, L., & Aubin, C.-É. (2016). Finite Element Analysis of Sacroiliac Joint Fixation under Compression Loads. International Journal of Spine Surgery, 10, 11 pages. External link
Caouette, C., Ikin, N., Villemure, I., Arnoux, P. J., Rauch, F., & Aubin, C.-É. (2016). Geometry reconstruction method for patient-specific finite element models for the assessment of tibia fracture risk in osteogenesis imperfecta. Medical & Biological Engineering & Computing, 55(4), 549-560. External link
Cappato, R. (2016). Simulation numérique des instabilités rotor stator dans une turbine hydraulique avec Foam-Extend [Master's thesis, École Polytechnique de Montréal]. Available
Carmona, J.-P. (2016). Design of Small Structural Titanium Aeronautic Parts Made by Laser Powder Bed Fusion [Master's thesis, École Polytechnique de Montréal]. Available
Cevik, M., Vo, H. D., & Yu, H. (2016). Casing treatment for desensitization of compressor performance and stability to tip clearance. Journal of Turbomachinery, 138(12), 16 pages. External link
Chizari, K., Daoud, M. A., Ravindran, A. R., & Therriault, D. (2016). 3D printing of highly conductive nanocomposites for the functional optimization of liquid sensors. Small, 12(44), 6076-6082. Available
Chizari, K., Daoud, M. A., Ravindran, A. R., & Therriault, D. (2016). Liquid Materials: 3D Printing of Highly Conductive Nanocomposites for the Functional Optimization of Liquid Sensors (Small 44/2016). Small, 12(44), 6176-6176. External link
Cimmino, M. (2016). Fluid and borehole wall temperature profiles in vertical geothermal boreholes with multiple U-tubes. Renewable Energy, 96, Part A, 137-147. External link
Cimmino, M., & Baliga, B. R. (2016, January). Examination of two approaches for determining interfacial conduction coefficient in porous media [Paper]. 4th International Conference on Computational Methods for Thermal Problems, Atlanta, GA. Unavailable
Cobetto, N., Aubin, C.-É., Parent, S., Barchi, S., Turgeon, I., & Labelle, H. (2016, May). Assessment of a brace design approach combining CAD/CAM and numerical modeling for the brace treatment of adolescent idiopathic scoliosis [Paper]. 13th International Conference on Conservative Management of Spinal Deformities and First Joint Meeting of the International Research Society on Spinal Deformities and the Society on Scoliosis Orthopaedic and Rehabilitation Treatment (SOSORT-IRSSD 2016), Banff, Alberta. Unavailable
Cobetto, N., Aubin, C.-É., Parent, S., Clin, J., Barchi, S., Turgeon, I., & Labelle, H. (2016). Effectiveness of braces designed using computer-aided design and manufacturing (CAD/CAM) and finite element simulation compared to CAD/CAM only for the conservative treatment of adolescent idiopathic scoliosis: a prospective randomized controlled trial. European Spine Journal, 25(10), 3056-3064. Available
Courtois, A., Hirsekorn, M., Marcin, L., Vernet, N., Ruiz, E., & Lévesque, M. (2016, May). Viscoelastic behavior of an epoxy resin during cure : characterization and modeling [Paper]. 10th International Conference on Mechanics of Time-Dependent Materials, Paris, France. Unavailable
D'Avignon, K., & Kummert, M. (2016). Experimental assessment of a phase change material storage tank. Applied Thermal Engineering, 99, 880-891. External link
Dagenais, M., Deschênes, J., McDonald, M., Baptiste, P., Mascle, C., Legros, R., Spreutels, L., Marinova, M., Perrier, M., & Frayret, J.-M. (2016). Les stratégies de circularité des ressources. In Sauvé, S., Normandin, D., & McDonald, M. (eds.), L'économie circulaire : une transition incontournable (37-63). External link
Dalir, H., Farahani, R. D., Hernandez, L., Aldebert, C., Lévesque, M., & Therriault, D. (2016). Three-Dimensional Dielectrophoretic Microparticle Separator Fabricated by Ultraviolet-Assisted Direct-Write Assembly. Journal of Nanoscience and Nanotechnology, 16(1), 765-771. External link
Dayi, O., Afsharzadeh, A., & Mascle, C. (2016, February). A Lean based process planning for aircraft disassembly [Paper]. 7th IFAC Conference on Management and Control of Production and Logistics (MCPL 2016), Bremen, Germany. Published in IFAC-PapersOnLine, 49(2). External link
De Kerret, F. (2016). Étude expérimentale des écoulements eau-air à haut taux de vide dans les faisceaux de tubes [Master's thesis, École Polytechnique de Montréal]. Available
de Kerret, F., Benito, I., Béguin, C., Pelletier, D., & Étienne, S. (2016, July). Two-phase flow pattern recognition in a varying section based on void fraction and pressure measurements [Paper]. 28th IAHR Symposium on Hydraulic Machinery and Systems (IAHR 2016), Grenoble, France (10 pages). External link
de Pannemaecker, A., Fouvry, S., Brochu, M., & Buffiere, J. Y. (2016). Identification of the fatigue stress intensity factor threshold for different load ratios R: From fretting fatigue to C(T) fatigue experiments. International Journal of Fatigue, 82, 211-225. External link
Delbergue, D., Texier, D., Lévesque, M., & Bocher, P. (2016, August). Comparison of two X-ray residual stress measurement methods: sin2 ψ and cos α, through the determination of a martensitic steel X-ray elastic constant [Paper]. 10th International Conference on Residual Stresses (ICRS10), Sydney, Australia (6 pages). Available
Delisle, V. (2016). Experimental Performance Characterization and Modeling of Photovoltaic-Thermal Systems for Integration in High Performance Residential Buildings [Ph.D. thesis, École Polytechnique de Montréal]. Available
Delisle, V., & Kummert, M. (2016). Cost-benefit analysis of integrating BIPV-T air systems into energy-efficient homes. Solar Energy, 136, 385-400. External link
Dellacherie, S., Jamelot, E., & Lafitte, O. (2016). A simple monodimensional model coupling an enthalpy transport equation and a neutron diffusion equation. Applied Mathematics Letters, 62, 35-41. External link
Dellacherie, S., Jamelot, E., Lafitte, O., & Mouhamad, R. (2016, September). Numerical results for the coupling of a simple neutronics diffusion model and a simple hydrodynamics low mach number model without coupling codes [Paper]. 18th International Symposium on Symbolic and Numeric Algorithms for Scientific Computing (SYNASC 2016), Timisoara, Russia. External link
Dellacherie, S., Jung, J., Omnes, P., & Raviart, P. A. (2016). Construction of modified Godunov-type schemes accurate at any Mach number for the compressible Euler system. Mathematical Models and Methods in Applied Sciences, 26(13), 2525-2615. External link
Demers, V., Demarquette, N. R., Turenne, S., & Scalzo, O. (2016). Molding Properties of Inconel 718 Feedstocks Used in Low-Pressure Powder Injection Molding. Advances in Materials Science and Engineering, 2016, 1-7. Available
Deschênes, P.-A. (2016). Comportement des fissures de fatigue dans un champ de contraintes résiduelles de tension [Master's thesis, École Polytechnique de Montréal]. Available
Di Fratta, C., Koutsoukis, G., Klunker, F., Trochu, F., & Ermanni, P. (2016). Characterization of anisotropic permeability from flow front angle measurements. Polymer Composites, 37(7), 2037-2052. External link
Djeghri, N. (2016). Stall Margin Prediction and Improvement for Mixed Flow Compressors [Ph.D. thesis, École Polytechnique de Montréal]. Available
Dreischarf, M., Shirazi-Adl, A., Arjmand, N., Rohlmann, A., & Schmidt, H. (2016). Estimation of Loads on Human Lumbar Spine: A Review of In Vivo and Computational Model Studies. Journal of Biomechanics, 49(6), 833-845. External link
Driscoll, M., Aubin, C.-É., Moreau, A., Wakula, Y., Amini, S., & Parent, S. (2016). Novel Hemi-Staple for the Fusionless Correction of Pediatric Scoliosis: Influence on Intervertebral Disks and Growth Plates in a Porcine Model. Clinical Spine Surgery, 29(9), 457-464. External link
Duceppe, N., Wang, X., & Aubin, C.-É. (2016, October). 3D biomechanical evaluation of different implant configurations in scoliosis instrumentation with apical vertebral derotation [Paper]. 46e Réunion annuelle de la Société de scoliose du Québec, Estérel, QC. Unavailable
Dugre, A., Vadean, A., & Chaussee, J. (2016). Challenges of using topology optimization for the design of pressurized stiffened panels. Structural and Multidisciplinary Optimization, 53(2), 303-320. External link
Duong, X.T., Mayer, J. R. R., & Balazinski, M. (2016). Initial tool wear behavior during machining of titanium metal matrix composite (TiMMCs). International Journal of Refractory Metals and Hard Materials, 60, 169-176. External link
Dupuis, S., Fortin, C., Caouette, C., & Aubin, C.-É. (2016, May). Biomechanical modeling of global postural re-education and curve reducibility in physiotherapy treatment of adolescent idiopathic scoliosis [Paper]. 13th International Conference on Conservative Management of Spinal Deformities and First Joint Meeting of the International Research Society on Spinal Deformities and the Society on Scoliosis Orthopaedic and Rehabilitation Treatment (SOSORT-IRSSD 2016), Banff, Alberta. Unavailable
Duquette, O. (2016). Conception d'une micro-pompe sanguine [Master's thesis, École Polytechnique de Montréal]. Available
El Mourid, A., Ganesan, R., Brochu, M., & Lévesque, M. (2016). Effect of temperature on the failure modes of a triaxially braided polymer matrix composite. International Journal of Solids and Structures, 97-98, 15 pages. External link
El Ouaaid, Z., Shirazi-Adl, A., & Plamondon, A. (2016). Effects of variation in external pulling force magnitude, elevation, and orientation on trunk muscle forces, spinal loads and stability. Journal of Biomechanics, 49(6), 946-952. External link
El Ouaaid, Z., Shirazi-Adl, A., & Plamondon, A. (2016, July). Strength, muscle activity and spinal forces in trunk maximum isometric [Paper]. 19th Canadian Society for Biomechanics (CSB 2016), Hamilton, ON, Canada. External link
El Ouaaid, Z., Shirazi-Adl, A., & Plamondon, A. (2016, July). Trunk biomechanics under loads at various orientations, heights and magnitudes [Paper]. 19th Canadian Society for Biomechanics (CSB 2016), Hamilton, ON, Canada. External link
El Samrout, A., Braydi, O., Younes, R., Trochu, F., & Lafon, P. (2016, October). A new hybrid method to solve the multi-objective optimization problem for a composite hat-stiffened panel [Paper]. 6th International Conference on Metaheuristics and Nature Inspired Computing (META 2016), Marrakech, Morocco. External link
Ellyson, B. (2016). Étude du comportement en fatigue vibratoire de l'alliage de titane TI-6Al-4V produit par fabrication additive [Master's thesis, École Polytechnique de Montréal]. Available
Erler, E., Vo, H. D., & Yu, H. (2016). Desensitization of axial compressor performance and stability to tip clearance size. Journal of Turbomachinery, 138(3), 12 pages. External link
Eskandari, A. H., Arjmand, N., & Shirazi-Adl, A. (2016, July). Subject specific kinematics-driven spine model using 2D/3D image registration [Paper]. 19th Canadian Society for Biomechanics (CSB 2016), Hamilton, ON, Canada. External link
Fallah, F., Nosier, A., Sharifi, M., & Ghezelbash, F. (2016). On perturbation method in mechanical, thermal and thermo-mechanical loadings of plates: cylindrical bending of FG plates. Zamm-Zeitschrift Fur Angewandte Mathematik Und Mechanik, 96(2), 217-232. External link
Falsafioon, M. (2016). Moving Grids in Complex Configurations [Ph.D. thesis, École Polytechnique de Montréal]. Available
Farahani, R. D., Dubé, M., & Therriault, D. (2016). Three-dimensional printing of multifunctional nanocomposites: Manufacturing techniques and applications. Advanced Materials, 28(28), 5794-5821. Available
Farahani, R. D., Gagne, M., Sapieha, J.-E., & Therriault, D. (2016). Electrically Conductive Silver Nanoparticles-Filled Nanocomposite Materials as Surface Coatings of Composite Structures. Advanced Engineering Materials, 18(7), 1189-1199. External link
Fareh, F., Demers, V., Turenne, S., & Scalzo, O. (2015, December). Segregation measurement of inconel 718 feedstocks used in low-pressure metal injection molding [Paper]. International Conference on Advanced Materials Engineering and Technology (ICAMET 2015), Kaohsiung, Taiwan. External link
Farid, G., Boukhili, R., & Vadean, A. (2016, July). Static and fatigue behavior multi-bolted/bonded single-lap joints in woven composite plates [Paper]. 2nd International Conference on Mechanics of Composites, Porto, Portugal. Unavailable
Fattah-Alhosseini, A., Gashti, S. O., & Keshavarz, M. K. (2016). Effect of Film Formation Potential on Passive Behavior of Ultra-Fine-Grained 1050 Al Alloy Fabricated via ARB Process. Journal of Materials Engineering and Performance, 25(4), 1683-1689. External link
Ferlisi, C. A., Mazzini, C.-F., Laurendeau, É., Ramasawmy, D. R., Da Ronch, A., & Stalnov, O. (2016, January). Case Study of Two Capstone Student Projects from Canada and the United Kingdom [Paper]. 54th AIAA Aerospace Sciences Meeting (AIAA SciTech 2016), San Diego, California. External link
Fotsing, E. R., Leclerc, C., Sola, M., Ross, A., & Ruiz, E. (2016). Mechanical properties of composite sandwich structures with core or face sheet discontinuities. Composites Part B: Engineering, 88, 229-239. External link
Fradet, L., Arnoux, P.-J., Callot, V., & Petit, Y. (2016). Geometrical variations in white and gray matter affect the biomechanics of spinal cord injuries more than the arachnoid space. Advances in Mechanical Engineering, 8(8), 168781401666470. Available
Fradet, L., Cliche, F., Petit, Y., Mac-Thiong, J. M., & Arnoux, P. J. (2016). Strain rate dependent behavior of the porcine spinal cord under transverse dynamic compression. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 230(9), 858-866. External link
Fradet, L., Wang, X., Lenke, L. G., & Aubin, C.-É. (2016). Biomechanical analysis of proximal junctional failure following adult spinal instrumentation using a comprehensive hybrid modeling approach. Clinical Biomechanics, 39, 122-128. External link
Frigo, J.-B. (2016). Étude 3D de l'apparition du galop en rotation sur des corps épais [Master's thesis, École Polytechnique de Montréal]. Available
Gagné-Boisvert, L., & Bernier, M. (2016, June). Accounting for borehole thermal capacity when designing vertical geothermal heat exchangers [Paper]. ASHRAE summer conference, St. Louis, Missouri. Unavailable
Gallay, S. (2016). Algorithmes de couplage RANS et écoulement potentiel [Ph.D. thesis, École Polytechnique de Montréal]. Available
Gallay, S., & Laurendeau, É. (2016). Preliminary-design aerodynamic model for complex configurations using lifting-line coupling algorithm. Journal of Aircraft, 53(4), 1145-1159. External link
Garapin, J. (2016). Modélisation non linéaire du galop en rotation pour des cylindres rectangulaires [Master's thesis, École Polytechnique de Montréal]. Available
Gariépy, A., Larose, S., Perron, C., & Lévesque, M. (2016). Corrigendum to “Shot peening and peen forming finite element modelling - Towards a quantitative method”. International Journal of Solids and Structures, 83, 183-183. External link
Garon, A., & Carrier, M. (2016). Drain catheter. (Patent no. US9381330). External link
Gascon, L., Garcia, J. A., LeBel, F., Ruiz, E., & Trochu, F. (2016). A two-phase flow model to simulate mold filling and saturation in Resin Transfer Molding. International Journal of Material Forming, 9(2), 229-239. External link
Gaudet, G. (2016). Classification de mouvements fantômes du membre supérieur chez des amputés huméraux à l'aide de mesures électromyographiques et cinématiques [Master's thesis, École Polytechnique de Montréal]. Available
Gaudet, G., Raison, M., Maso, F. D., Achiche, S., & Begon, M. (2016). Intra- and intersession reliability of surface electromyography on muscles actuating the forearm during maximum voluntary contractions. Journal of Applied Biomechanics, 32(6), 558-570. External link
Gauthier, J. P., Giroux, A. M., Étienne, S., & Gosselin, F. (2016, July). CFD evaluation of added damping due to fluid flow over a hydroelectric turbine blade [Paper]. 28th IAHR Symposium on Hydraulic Machinery and Systems (IAHR 2016), Grenoble, France (10 pages). External link
Gauvin, R. (2016). Investigating the Thermoformability of Uhmw-Polyethylene. Journal of Plastic Film & Sheeting, 3(4), 312-324. External link
Gervais, B., Vadean, A., Brochu, M., & Raison, M. (2016, May). Dynamical evolution of stress distribution of a femoral orthopedic implant using multibody dynamics with finite element modeling [Paper]. 4th Joint International Conference on Multibody System Dynamics (IMSD 2016), Montréal, Québec (3 pages). Unavailable
Gervais, B., Vadean, A., Brochu, M., & Raison, M. (2016, May). Evolution of the stress distribution of a femoral orthopedic implant by combining multibody dynamics and finite element modeling [Paper]. 4th Joint International Conference on Multibody System Dynamics (IMSD 2016), Montréal, Québec. Unavailable
Gervais, B., Vadean, A., Raison, M., & Brochu, M. (2016). Failure analysis of a 316L stainless steel femoral orthopedic implant. Case Studies in Engineering Failure Analysis, 5-6, 30-38. Available
Ghandehariun, A., Kishawy, H., & Balazinski, M. (2016). On machining modeling of metal matrix composites: A novel comprehensive constitutive equation. International Journal of Mechanical Sciences, 107, 235-241. External link
Ghezelbash, F., Shirazi-Adl, A., Arjmand, N., El Ouaaid, Z., & Plamondon, A. (2016, July). Effects of curved muscles and disc positioning in trunk models on spinal loads [Paper]. 19th Canadian Society for Biomechanics (CSB 2016), Hamilton, ON, Canada. External link
Ghezelbash, F., Shirazi-Adl, A., Arjmand, N., El Ouaaid, Z., & Plamondon, A. (2016, July). Significance of scaling in the musculoskeletal modeling of the spine biomechanics [Paper]. 19th Canadian Society for Biomechanics (CSB 2016), Hamilton, ON, Canada. External link
Ghezelbash, F., Shirazi-Adl, A., Arjmand, N., El-Ouaaid, Z., & Plamondon, A. (2016). Subject-specific biomechanics of trunk: musculoskeletal scaling, internal loads and intradiscal pressure estimation. Biomechanics and Modeling in Mechanobiology, 15(6), 1699-1712. External link
Ghezelbash, F., Shirazi-Adl, A., Arjmand, N., El-Ouaaid, Z., Plamondon, A., & Meakin, J. R. (2016). Effects of sex, age, body height and body weight on spinal loads: Sensitivity analyses in a subject-specific trunk musculoskeletal model. Journal of Biomechanics, 49(14), 3492-3501. External link
Ghiasi, M. S., Arjmand, N., Shirazi-Adl, A., Farahmand, F., Hashemi, H., Bagheri, S., & Valizadeh, M. (2016). Cross-sectional area of human trunk paraspinal muscles before and after posterior lumbar surgery using magnetic resonance imaging. European Spine Journal, 25(3), 774-782. External link
Givi, M., & Mayer, J. R. R. (2016). Optimized volumetric error compensation for five-axis machine tools considering relevance and compensability. CIRP Journal of Manufacturing Science and Technology, 12, 44-55. External link
Godefroy, V., Lecomte, C., Bernier, M., Douglas, M., & Armstrong, M. (2016, January). Experimental validation of a thermal resistance and capacity model for geothermal boreholes [Paper]. ASHRAE Winter Conference, Orlando, Florida, United States. External link
Golipour, A., Arjmand, N., & Shirazi-Adl, A. (2016, July). Estimation of spine 3D posture in reaching and lifting: Artificial neural networks [Paper]. 19th Canadian Society for Biomechanics (CSB 2016), Hamilton, ON, Canada. External link
Grasland-Mongrain, P., Yuankang, L., Lesage, F., Catheline, S., & Cloutier, G. (2016). Generation of shear waves by laser in soft media in the ablative and thermoelastic regimes. Applied Physics Letters, 109(22), 5 pages. External link
Gravina, A. N., D'Elia, N. L., Sartuqui, J., Maghi, K., Yahia, L., & Messina, P. V. (2016). Ce-TiO2 material with promising characteristics for osseointegration: Interaction with fibroblasts and effect of albumin adsorption and bioactivity on 3D surface topography. Bone, 89, 65-65. External link
Gravina, N., Maghni, K., Welman, M., Yahia, L., Mbeh, D. A., & Messina, P. V. (2016). Protective role against hydrogen peroxide and fibroblast stimulation via Ce-doped TiO₂ nanostructured materials. Biochimica Et Biophysica Acta-General Subjects, 1860(2), 452-464. External link
Hache, N., Soudan, G., & Bernier, M. (2016, January). Energy use of ground-source heat pumps for various load temperatures [Paper]. ASHRAE Winter Conference, Orlando, Florida, United States. External link
Hached, S., Garon, A., Sawan, M., Loutochin, O., & Corcos, J. (2016, October). Smart artificial urinary sphincters: Implementation challenges [Paper]. 59th IEEE International Midwest Symposium on Circuits and Systems (MWSCAS 2016), Abu Dhabi, United Arab Emirates (4 pages). External link
Hached, S., Trigui, A., Garon, A., Loutochin, O., Corcos, J., & Sawan, M. (2016). Novel electromechanic artificial urinary sphincter. IEEE/ASME Transactions on Mechatronics, 21(2), 945-955. External link
Hachem, B., Aubin, C.-É., & Parent, S. (2016). Local Epiphyseal Growth Modulation for the Early Treatment of Progressive Scoliosis: Experimental Validation Using a Porcine Model. Spine, 41(17), E1009-E1015. External link
Hadji, A. (2016). Modèles non linéaires pour l'interaction tube-support [Ph.D. thesis, École Polytechnique de Montréal]. Available
Hadji, A., & Mureithi, N. W. (2016). Identification of friction model parameters using the inverse harmonic method. Journal of Pressure Vessel Technology, 139(2), 57 pages. External link
Hasanzadeh, K., Laurendeau, É., & Paraschivoiu, I. (2016). Grid-generation algorithms for complex glaze-ice shapes Reynolds-averaged Navier-Stokes simulations. AIAA Journal, 54(3), 847-860. External link
Hassani, M. (2016). Elastic Reconfiguration of Bending and Twisting Rods in Air Flow [Ph.D. thesis, École Polytechnique de Montréal]. Available
Hassani, M., Mureithi, N. W., & Gosselin, F. (2016). Large coupled bending and torsional deformation of an elastic rod subjected to fluid flow. Journal of Fluids and Structures, 62, 367-383. External link
Hassanipour, M., Verreman, Y., Lanteigne, J., & Chen, J. Q. (2016). Effect of periodic underloads on fatigue crack growth in three steels used in hydraulic turbine runners. International Journal of Fatigue, 85, 40-48. External link
Hay, A., & Pelletier, D. (2016, January). Adaptive time integration for separated two-phase viscous flows [Paper]. 54th AIAA Aerospace Sciences Meeting (AIAA SciTech 2016), San Diego, California. External link
Hay, A., Belley, C., & Pelletier, D. (2016, January). Multi-parametric high-order flow sensitivity analysis [Paper]. 57th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, San Diego, California (18 pages). External link
Hay, A., Étienne, S., & Pelletier, D. (2016, January). Adaptive simulation of gas-liquid interfacial flows with surface tension [Paper]. 54th AIAA Aerospace Sciences Meeting (AIAA SciTech 2016), San Diego, California. External link
Hay, A., Étienne, S., Pelletier, D., & Brosset, L. (2016, June). Accurate prediction of Sloshing waves in tanks by an adaptive two-fluid incompressible front-tracking approach [Paper]. 26th Annual International Ocean and Polar Engineering Conference (ISOPE 2016), Rhodes, Greece. External link
Hébert, A. (2016). Applied Reactor Physics. Unavailable
Hébert, A. (2016). DRAGON5 and DONJON5, the contribution of École Polytechnique de Montréal to the SALOME platform. Annals of Nuclear Energy, 87, 12-20. External link
Hébert, A. (2016). High-Order Linear Discontinuous and Diamond Differencing Schemes Along Cyclic Characteristics. Nuclear Science and Engineering, 184(4), 591-603. External link
Hébert, A. (2016, September). PyNjoy 2012 : A system for producing cross-section libraries for the DRAGON lattice code [Paper]. International Conference on Nuclear Data for Science and Technology (ND 2016), Bruges, Belgium (9 pages). External link
Hébert, A., & Marleau, G. (2016, May). DRAGON5 Workshop [Paper]. Physics of Reactors (PHYSOR 2016): Unifying Theory and Experiments in the 21st Century, Sun Valley, Idaho. Unavailable
Hehenberger, P., Vogel-Heuser, B., Bradley, D., Eynard, B., Tomiyama, T., & Achiche, S. (2016). Design, modelling, simulation and integration of cyber physical systems: Methods and applications. Computers in Industry, 82, 273-289. External link
Hely, C. (2016). Planification de trajectoires pour placement automatisé de fibres sur surfaces de géométries complexes [Master's thesis, École Polytechnique de Montréal]. Available
Henao, J., Aubin, C.-É., Labelle, H., & Arnoux, J. P. (2016). Patient-specific finite element model of the spine and spinal cord to assess the neurological impact of scoliosis correction, preliminary application on two cases with and without intraoperative neurological complications. Computer Methods in Biomechanics and Biomedical Engineering, 19(8), 900-910. External link
Henault, B., Pasquier, P., & Kummert, M. (2016). Financial optimization and design of hybrid ground-coupled heat pump systems. Applied Thermal Engineering, 93, 72-82. External link
Hernandez, S., Leroux, M., Achiche, S., & Raison, M. (2016, May). Based Learning involving physical prototypes to support the teaching of multibody modeling applied to the human body [Paper]. Joint International Conference on Multibody System Dynamics (IMSD 2016), Montréal, Québec. Unavailable
Hernandez, S., Leroux, M., Achiche, S., & Raison, M. (2016, May). Project Based Learning involving physical prototypes to support the teaching of multibody modeling applied to the human body [Paper]. Joint International Conference on Multibody System Dynamics (IMSD 2016), Montréal, Québec. Unavailable
Hoarau, Y., Pena, D., Vos, J. B., Charbonier, D., Gehri, A., Braza, M., Deloze, T., & Laurendeau, É. (2016, January). Recent Developments of the Navier Stokes Multi Block (NSMB) CFD solver [Paper]. 54th AIAA Aerospace Sciences Meeting (AIAA SciTech 2016), San Diego, California. External link
Hosseinimanesh, H. (2016). 3D Numerical Modeling of Transient Conditions in Francis Turbines [Ph.D. thesis, École Polytechnique de Montréal]. Available
Hosseinimanesh, H., Devals, C., Nennemann, B., Reggio, M., & Guibault, F. (2016). A numerical study of Francis turbine operation at no-load condition. Journal of Fluids Engineering, 139(1), 60 pages. External link
Hosseinimanesh, H., Devals, C., Nennemann, B., Reggio, M., & Guibault, F. (2016, July). Unsteady simulation for Francis Turbine during load rejection events [Paper]. ASME Fluids Engineering Division Summer Meeting (FEDSM 2016), Washington, DC, United states (10 pages). External link
Huber, C., Parmigiani, A., Degruyter, W., Bachmann, O., & Leclaire, S. (2016, December). Volatile transport in subvolcanic magma reservoirs [Abstract]. American Geophysical Union Fall Meeting 2016, San Francisco, Calif.. Unavailable
Huber, M., Gilbert, G., Roy, J., Parent, S., Labelle, H., & Périé-Curnier, D. (2016). Sensitivity of MRI parameters within intervertebral discs to the severity of adolescent idiopathic scoliosis. Journal of Magnetic Resonance Imaging, 76(5), 1123-1131. External link
Hughes, V., Tabiai, I., Chizari, K., & Therriault, D. (2016). 3D printable conductive nanocomposites of PLA and multi‑walled carbon nanotubes¹. Material Matters, 11(2), 61-63. External link
Iliescu, L. E. (2016). The Development of an Intelligent Health Monitoring System for Micrometeoroid and Space Debris Protection Systems and Spacecraft Structural Components [Ph.D. thesis, École Polytechnique de Montréal]. Available
Iliescu, L. E., Lakis, A. A., & Oulmane, A. (2016). Hypervelocity impact (HVI) signal analysis. European Journal of Engineering and Technology, 4(1), 66-93. External link
Iliescu, L. E., Lakis, A. A., & Oulmane, A. (2016). Satellites-spacecraft materials and hypervelocity impact (HVI) testing: numerical simulations. European Journal of Mechanical Engineering Research, 3(3), 41-77. External link
Jamin, T., Dube, M., & Laberge Lebel, L. (2016). Effect of stamp-forming parameters and bend radius on the mechanical performance of curved beam carbon fiber/polyphenylene sulfide specimens. Journal of Composite Materials, 50(9), 1213-1225. External link
Jeandin, T., & Mascle, C. (2016). A New Model to Select Fasteners in Design for Disassembly. Procedia CIRP, 40, 425-430. External link
Kamali Zadeh, S. (2016). Initial Tool Wear Mechanisms in Turning of Titanium Metal Matrix Composites [Master's thesis, École Polytechnique de Montréal]. Available
Kaviani, R., Londono, I., Parent, S., Moldovan, F., & Villemure, I. (2016). Growth plate cartilage shows different strain patterns in response to static versus dynamic mechanical modulation. Biomechanics and Modeling in Mechanobiology, 15(4), 933-946. External link
Kaviani, R., Merat, P., Moldovan, F., & Villemure, I. (2016). An automated cell viability quantification method for low-resolution confocal images of closely packed cells based on a modified gradient flow tracking algorithm. Journal of Microscopy, 261(3), 217-226. External link
Kerboua, Y., & Lakis, A. A. (2016). Numerical model to analyze the aerodynamic behavior of a combined conicalcylindrical shell. Aerospace Science and Technology, 58, 601-617. External link
Keshavarz, M. K., Vasilevskiy, D., Masut, R. A., & Turenne, S. (2016). Mechanical properties of bismuth telluride based alloys with embedded MoS2nano-particles. Materials & Design, 103, 114-121. External link
Khalfi, B., & Ross, A. (2016). Transient and harmonic response of a sandwich with partial constrained layer damping: A parametric study. Composites Part B: Engineering, 91, 44-45. External link
Khameneifar, F., & Feng, H.-Y. (2016). A new methodology for evaluating position and orientation errors of airfoil sections. International Journal of Advanced Manufacturing Technology, 83(5-8), 1013-1023. External link
Kummert, M. (2016, October). Using TRNSYS in a graduate course on solar energy engineering [Paper]. 11th ISES EuroSun Conference, Palma, Spain (12 pages). External link
Lakis, A. A., & Trinh, N. D. (2016). Void fraction in highly turbulent and large diameter horizontal pipe flow. European Journal of Engineering and Technology, 4(2), 55-77. External link
Lalande, V., Villemure, I., Parent, S., & Aubin, C.-É. (2016, October). Évaluation expérimentale des forces appliquées sur les plaques de croissance par un dispositif de compression antérieure sans fusion : résultats préliminaires [Paper]. 46e réunion de la Société de scoliose du Québec (SSQ), Estérel, Québec, Canada. Unavailable
Lapointe, F. L., Oswald, A., Nakai, A., & Laberge Lebel, L. (2016, June). Manufacturing of carbon/polyamide beam by vacuum assisted pultrusion [Paper]. 17th European Conference on Composite Materials (ECCM 2016), Munich, Germany. External link
Lapointe, F., Oswald, A., & Laberge Lebel, L. (2016, August). Manufacturing of thermoplastic composite rods using vacuum assisted pultrusion [Paper]. Canada-Japan-Vietnam Workshop on Composites, Ho Chi Minh City, Vietnam. External link
Lapointe, M.-O. (2016). Évaluation des propriétés mécaniques du tissu cardiaque par échocardiographie [Master's thesis, École Polytechnique de Montréal]. Available
Lapointe, S., Zhim, F., Sideris, L., Drolet, P., Celestin-Noel, S., & Dube, P. (2016). Effect of chemotherapy and heat on biomechanical properties of absorbable sutures. Journal of Surgical Research, 200(1), 59-65. External link
Larouche-Guilbert, M., Barron, O., Achiche, S., & Raison, M. (2016, May). Real-time assessment of muscle forces based on multibody dynamics and electromyography [Paper]. Joint International Conference on Multibody System Dynamics (IMSD 2016), Montréal, Québec. Unavailable
Lashkajani, K. H., Ghorbani, B., Amidpour, M., & Hamedi, M.-H. (2016). Superstructure optimization of the olefin separation system by harmony search and genetic algorithms. Energy, 99, 288-303. External link
Le Naveaux, F. (2016). Biomécanique des configurations d'instrumentation chirurgicale de la scoliose idiopathique de l'adolescence [Ph.D. thesis, École Polytechnique de Montréal]. Available
Le Navéaux, F., Larson, A. N., Labelle, H., Wang, X., & Aubin, C.-É. (2016). How does implant distribution affect 3D correction and bone-screw forces in thoracic adolescent idiopathic scoliosis spinal instrumentation? Clinical Biomechanics, 39, 25-31. External link
Lebel, L. (2016). Fissuration d'un composite à matrice céramique dans une application de pièce statique de turbine à gaz [Ph.D. thesis, École Polytechnique de Montréal]. Available
Leclaire, S., Abahri, K., Belarbi, R., & Bennacer, R. (2016). Modeling of static contact angles with curved boundaries using a multiphase lattice Boltzmann method with variable density and viscosity ratios. International Journal for Numerical Methods in Fluids, 82(8), 451-470. External link
Leclaire, S., Abahri, K., Belarbi, R., Latt, J., Chopard, B., & Bennacer, R. (2016, May). A geometrical approach for simulating multiphase flow static contact angles with a lattice Boltzmann method [Paper]. International Conference on Materials & Energy, La Rochelle, France. Unavailable
Leclaire, S., Parmigiani, A., Malaspinas, O., Chopard, B., & Latt, J. (2016, January). Lattice Boltzmann method for simulating immiscible two-phase flows in porous media [Paper]. MATHIAS-Total, Marne-la-Vallée, France. Unavailable
Leclaire, S., Pellerin, N., Reggio, M., & Trépanier, J.-Y. (2016). A multiphase lattice Boltzmann method for simulating immiscible liquid-liquid interface dynamics. Applied Mathematical Modelling, 40(13-14), 6376-6394. External link
Lecomte, C. (2016). Modélisation de champs de puits géothermiques en série pour un stockage thermique saisonnier [Master's thesis, École Polytechnique de Montréal]. Available
Lecomte, C., & Bernier, M. (2016, May). Modélisation et simulation de puits géothermiques en série pour stockage saisonnier [Paper]. Building Performance Simulation Conference (eSim 2016), Hamilton, Ontario, Canada. External link
Leroux, M., Beaini, D., Achiche, S., & Raison, M. (2016, May). Revisiting the Agile eye using Euler-Lagrange Formalism and Torque Control [Paper]. Joint International Conference on Multibody System Dynamics (IMSD 2016), Montréal, Québec. Unavailable
Letarte, A., Joncas, S., Ross, A., & Martin, F. (2016, January). Evaluating the stiffness of conic interfacing parts : a practical method for finite element model updating based on experimental modal testing [Paper]. 57th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference (AIAA SciTech 2016), San Diego, CA. External link
Lévesque, M., Chassé, M. C., Mehrez, E., & Bonneville, E. (2016). Collaboration pour des équipements et expertises de recherche. (Technical Report). Unavailable
Li, H. (2016). Development of a Time Delay Formulation for Fluidelastic Instability Model [Master's thesis, École Polytechnique de Montréal]. Available
Li, X. (2016). Méthodologie d'optimisation des profils de vitesse à l'entrée des aspirateurs de turbines hydrauliques [Master's thesis, École Polytechnique de Montréal]. Available
Luk-Cyr, J., El-Bawab, R., Champliaud, H., Lanteigne, J., & Vadean, A. (2016). Sequential approximate optimization of industrial hammer peening using finite element simulations. Structural and Multidisciplinary Optimization, 55(3), 767-778. External link
Luk-Cyr, J., El-Bawab, R., Lanteigne, J., Champliaud, H., & Vadean, A. (2016). Mechanical properties of 75% Ar / 25% CO2 flux-cored arc welded E309L austenitic stainless steel. Materials Science and Engineering: A, 678, 197-203. External link
Madra, A., Trochu, F., & Breitkopf, P. (2016, June). An optimized model of dual-scale geometry of textile reinforcement based on X-ray microtomography for modeling of RTM processes [Paper]. European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2016), Crete Island, Greece. External link
Mahdavi, H., Abderrafai, Y., Piccirelli, N., Pautard, S., & Therriault, D. (2016, July). Anisotropic properties of 3D printed nylon by fused deposition modelling technique [Paper]. 6th International conference on engineering and applied sciences (ICEAS 2016), Vancouver, Canada. Unavailable
Mahvash, A., & Lakis, A. A. (2016). Independent component analysis as applied to vibration source separation and fault diagnosis. Journal of Vibration and Control, 22(6), 1682-1692. External link
Malouin, B., Trépanier, J.-Y., & Laurendeau, É. (2016). Installation and interference drag decomposition via RANS far-field methods. Aerospace Science and Technology, 54, 132-142. External link
Maltais Larouche, S. (2016). Détection de faute automatique dans les systèmes solaires thermiques basée sur la vérification de règles et la simulation [Master's thesis, École Polytechnique de Montréal]. Available
Manac'h, Y. G., Gilbert, G., Beaudoin, G., & Périé-Curnier, D. (2016). Relaxation times and diffusion tensor imaging detecting changes within bovine nucleus pulposus during enzyme digestion: cross-effect of the hydration and digestion. Computer Methods in Biomechanics and Biomedical Engineering-Imaging and Visualization, 4(6), 344-351. External link
Marcotte, B. (2016). Étude du transfert thermique transitoire dans les puits géothermiques à quatre tuyaux [Master's thesis, École Polytechnique de Montréal]. Available
Marouane, H., Shirazi-Adl, A., & Adouni, M. (2016). Alterations in knee contact forces and centers in stance phase of gait: A detailed lower extremity musculoskeletal model. Journal of Biomechanics, 49(2), 185-192. External link
Marouane, H., Shirazi-Adl, A., & Adouni, M. (2016, March). Determination of knee contact centers and contact forces during gait: Evaluation of existing techniques [Paper]. ORS 2016 Annual Meeting, Orlando, Florida. External link
Marouane, H., Shirazi-Adl, A., & Adouni, M. (2016, July). A hybrid computational musculoskeletal model of the lower extremity in gait [Paper]. 19th Canadian Society for Biomechanics (CSB 2016), Hamilton, ON, Canada. External link
Marouane, H., Shirazi-Adl, A., Adouni, M., & Hashemi, J. (2016, March). 2D versus 3D estimation of knee joint muscle and contact forces in gait [Poster]. ORS 2016 Annual Meeting, Orlando, Florida. External link
Marouene, A., Boukhili, R., Chen, J., & Yousefpour, A. (2016). Buckling behavior of variable-stiffness composite laminates manufactured by the tow-drop method. Composite Structures, 139, 243-253. Available
Marouene, A., Boukhili, R., Chen, J., & Yousefpour, A. (2016). Effects of gaps and overlaps on the buckling behavior of an optimally designed variable-stiffness composite laminates - A numerical and experimental study. Composite Structures, 140, 556-566. External link
Martinez, G. (2016). Étude et prédiction numérique des modes d'écoulement à travers un renfort fibreux à double échelle de porosité [Master's thesis, École Polytechnique de Montréal]. Available
Maso, F. D., Blache, Y., Raison, M., Arndt, A., & Begon, M. (2016). Distance between rotator cuff footprints and the acromion, coracoacromial ligament, and coracoid process during dynamic arm elevations: preliminary observations. Manual Therapy, 25(September), 94-99. External link
McDowell, T. P., & Kummert, M. (2016, August). Estimating sub-hourly solar radiation and effective sky temperature from hourly weather data [Paper]. ASHRAE/IBPSA-USA Building Simulation Conference: Building Performance Modeling (SimBuild 2016), Salt Lake City, UT, USA. External link
Mehdi Zadeh, F., Étienne, S., & Teyssedou, A. (2016). 2-D CFD time-dependent thermal-hydraulic simulations of CANDU-6 moderator flows. Nuclear Engineering and Design, 309, 122-135. External link
Mehdi Zadeh, F., Étienne, S., & Teyssedou, A. (2016). Computational Fluid Dynamic Simulation of the Moderator Flow in CANDU-6 Nuclear Reactors. Journal of Nuclear Engineering and Radiation Science, 3(1), 13 pages. External link
Menard, A. L., Grimard, G., Massol, E., Londono, I., Moldovan, F., & Villemure, I. (2016). Static and dynamic compression application and removal on the intervertebral discs of growing rats. Journal of Orthopaedic Research, 34(2), 290-298. External link
Ménard, A.-L., Grimard, G., Massol, É., Londono, I., Moldovan, F., & Villemure, I. (2016, March). Le retrait de compression dynamique permet la reprise de croissance osseuse en préservant l'intégrité du disque intervertébral : Étude in vivo sur les rats [Paper]. Journée scientifique du RSBO 2016, Montréal, Québec. Unavailable
Méndez Romero, J. A. (2016). Experimental and Numerical Study of Needle Peening Effects in Aluminium Alloy 2024-T3 Sheets [Master's thesis, École Polytechnique de Montréal]. Available
Miao, H. Y., & Lévesque, M. (2016). Literature review on three warm surface treatment processes : warm shot peening, warm laser shock peening and warm deep rolling. (Technical Report). Unavailable
Michaud, M., Milan, P., & Vo, H. D. (2016). Low-Cost Rotating Experimentation in Compressor Aerodynamics Using Rapid Prototyping. International Journal of Rotating Machinery, 2016. Available
Michel, A., Kaabi, A., & Vadean, A. (2016, July). Design improvement study of scarf repair for composite structures [Paper]. 2nd International Conference on Mechanics of Composites, Porto, Portugal. Unavailable
Mireles, L. K., Sacher, E., Yahia, L., Laurent, S., & Stanicki, D. (2016). A comparative physicochemical, morphological and magnetic study of silane-functionalized superparamagnetic iron oxide nanoparticles prepared by alkaline coprecipitation. International Journal of Biochemistry & Cell Biology, 75, 203-211. External link
Miron, P. (2016). Étude du décollement mobile dans les écoulements tourbillonnaires [Ph.D. thesis, École Polytechnique de Montréal]. Available
Mohebbi, A., Achiche, S., & Baron, L. (2016). Design of a vision guided mechatronic quadrotor system using design for control methodology. Transactions of the Canadian Society for Mechanical Engineering, 40(2), 201-219. External link
Monnot, P., Levesque, J., Vermeersch, O., & Laberge Lebel, L. (2016, May). Automated braiding of dry preforms for aerospace structural components [Paper]. SAMPE Long Beach 2016 Conference and Exhibition, Long Beach, CA, United states. External link
Monzó, P., Bernier, M., Acuña, J., & Mogensen, P. (2016, January). A Monthly Based Bore Field Sizing Methodology with Applications to Optimum Borehole Spacing [Paper]. ASHRAE Winter Conference 2016, Orlando, Florida. Published in ASHRAE Transactions, 122(Part 1). Unavailable
Morada, G., Marouene, A., Vadean, A., & Boukhili, R. (2016, August). Numerical analysis on compression failure mechanisms of impacted non-crimp fabric reinforced composites [Paper]. 24th International Congress of Theoretical and Applied Mechanics (ICTAM 2016), Montréal, Québec. External link
Moulin, A. (2016). Simulation numérique par la méthode des éléments spectraux des vibrations induites par relâcher tourbillonnaire [Master's thesis, École Polytechnique de Montréal]. Available
Mureithi, N. W., Cucuel, B., Saber-Cherif, K., Olala, S., & Ashrafi, F. (2016, July). Characteristics of turbulence and drag forces on foreign objects in tube arrays [Paper]. ASME Pressure Vessels and Piping Conference (PVP 2016), Vancouver, British Columbia. External link
Mustafy, T., Benoit, A., Londono, I., Moldovan, F., & Villemure, I. (2016, July). In-Vivo micro-CT study on bone morphology or growing rats: radiation effects [Paper]. ESB Annual Congress, Lyon, France. External link
Mustafy, T., Benoit, A., Londono, I., Moldovan, F., & Villemure, I. (2016, March). Radiation effects on bone architecture in adolescent rats resulting from in vivo micro-ct scanning [Paper]. Journée scientifique du RSBO 2016, Montréal, Québec. Unavailable
Nabatian, N., & Mureithi, N. W. (2016, July). Bifurcation analysis and the role of normal form symmetries on the harmonic forced inline oscillation of the cylinder wake [Paper]. ASME Pressure Vessels and Piping Conference (PVP 2016), Vancouver, British Columbia. External link
Olala, S. O. (2016). Streamwise Fluidelastic Instability of Tube Arrays Subjected to Two-Phase Flow [Ph.D. thesis, École Polytechnique de Montréal]. Available
Ortensi, J., Wang, Y., Baker, B., Schunert, S., Gleicher, F. N., DeHart, M. D., Laurier, A., & Hébert, A. (2016, May). Preparation of a Neutron Transport Data Set for Simulations of the Transient Test Reactor Facility [Paper]. Physics of Reactors (PHYSOR 2016), Sun Valley, ID. Unavailable
Oswald, A. (2016). Pultrusion multi-filière assistée par le vide de LIN/PLA [Master's thesis, École Polytechnique de Montréal]. Available
Oswald, A., Lapointe, F. L., & Laberge Lebel, L. (2016, June). Multi-die, vacuum assisted pultrusion of flax/PLA thermoplastic biocomposite rods [Paper]. 17th European Conference on Composite Materials (ECCM 2016), Munich, Germany. External link
Ouadday, R., Kaabi, A., Boukhili, R., & Vadean, A. (2016, August). Effect of alumina trihydrate concentration on physical and mechanical properties of ATH/vinylester composite [Paper]. 24th International Congress of Theoretical and Applied Mechanics (ICTAM 2016), Montréal, Québec. External link
Ouadday, R., Kaabi, A., Boukhili, R., & Vadean, A. (2016, August). Effect of alumina trihydrate particle size on physical and mechanical properties of ATH/vinylester composite [Paper]. 24th International Congress of Theoretical and Applied Mechanics, Montréal, Québec. Unavailable
Oulmane, A., Lakis, A. A., & Mureithi, N. W. (2016). Automatic fault diagnosis of rotating machinery. European Journal of Mechanical Engineering Research, 3(2), 19-41. External link
Parent, A., Raison, M., Pouliot-Laforte, A., Marois, P., Maltais, D. B., & Ballaz, L. (2016). Impact of a short walking exercise on gait kinematics in children with cerebral palsy who walk in a crouch gait. Clinical Biomechanics, 34, 18-21. External link
Parmigiani, A., Huber, C., Bachmann, O., & Leclaire, S. (2016, April). Why are plutons dry? Outgassing mechanisms of crustal magmatic bodies [Paper]. EGU General Assembly 2016, Vienna, Austria. Unavailable
Pena, D. (2016). Développement d'un code de givrage tridimensionnel avec méthode Level-set [Ph.D. thesis, École Polytechnique de Montréal]. Available
Pena, D., Hoarau, Y., & Laurendeau, É. (2016). Development of a three-dimensional icing simulation code in the NSMB flow solver. International Journal of Engineering Systems Modelling and Simulation, 8(2), 86-98. External link
Pena, D., Hoarau, Y., & Laurendeau, É. (2016). A single step ice accretion model using Level-Set method. Journal of Fluids and Structures, 65, 278-294. External link
Piaget, D. (2016). Comparaison de la qualité des simulations d'écoulements visqueux turbulents sur différents maillages d'hexaèdres [Master's thesis, École Polytechnique de Montréal]. Available
Pignet, S., Bernard, F., Salino, V., Taforeau, J., Hébert, A., & Bruneau, A. (2016, May). The IRSN Orion project: development of new capabilities for neutronics deterministic simulations dedicated to safety analysis [Paper]. Physics of Reactors (PHYSOR 2016), Sun Valley, Idaho. Unavailable
Piollet, E., Laroche, S., Bianki, M.-A., & Ross, A. (2016, August). A mobile reverberation cabin for acoustic measurements in an existing anechoic room [Paper]. 45th International Congress and Exposition on Noise Control Engineering: Towards a Quieter Future (INTER-NOISE 2016), Hamburg, Germany. Unavailable
Piollet, E., Poquillon, D., & Michon, G. (2016). Dynamic hysteresis modelling of entangled cross-linked fibres in shear. Journal of Sound and Vibration, 383, 248-264. External link
Provencher, P. R., & Balazinski, M. (2016). Automatic identification of feed marks in machined surface roughness profiles by correlating random variations. International Journal of Advanced Manufacturing Technology, 82(5-8), 1305-1315. External link
Rahman, M. M. (2016). Calibration of Machine Tools Using on Machine Probing of an Indigenous Artefact [Ph.D. thesis, École Polytechnique de Montréal]. Available
Rahman, M. M., & Mayer, J. R. R. (2016). Calibration performance investigation of an uncalibrated indigenous artefact probing for five-axis machine tool. Journal of Machine Engineering, 16(1), 33-42. External link
Rahman, M. M., & Mayer, J. R. R. (2016). Measurement Accuracy Investigation of Touch Trigger Probe with Five-Axis Machine Tools. Archive of Mechanical Engineering, 63(4), 495-510. Available
Rahman, M. M., & Mayer, J. R. R. (2016). Performance of a five-axis machine tool as a coordinate measuring machine (CMM). Journal of Advanced Mechanical Design, Systems, and Manufacturing, 10(5), 14 pages. External link
Raison, M. (2017, January). Analysis of walking clinic and decomposition of reaction forces of the floor under the feet North and South America workshop on clinical gait analysis [Presentation]. In North and South America workshop on clinical gait analysis (SER 2017), San Juan, Puerto Rico. Unavailable
Raison, M. (2016, June). What does DHM, Biomechanics and Robotics have in common? [Presentation]. In 4th International Digital Human Modeling Symposium (DHM2016), Montréal, Québec, Canada. Unavailable
Rak, M. B. (2016). Fusion of High Density Low Precision and Low Density High Precision Data in Coordinate Metrology [Ph.D. thesis, École Polytechnique de Montréal]. Available
Rak, M. B., Wozniak, A., & Mayer, J. R. R. (2016). The use of low density high accuracy (LDHA) data for correction of high density low accuracy (HDLA) point cloud. Optics and Lasers in Engineering, 81, 140-150. External link
Rak, M., & Wozniak, A. (2015, September). Systematic errors of measurements on a measuring arm equipped with a laser scanner on the results of optical measurements [Paper]. 11th International Conference on Mechatronics, Warsaw, Poland. External link
Rebhi, R., Mamou, M., Vasseur, P., & Alliche, M. (2016). Form drag effect on the onset of non-linear convection and Hopf bifurcation in binary fluid saturating a tall porous cavity. International Journal of Heat and Mass Transfer, 100, 178-190. External link
Ren, Q., Achiche, S., Jemielniak, K., & Bigras, P. (2016, July). An Enhanced Adaptive Neural Fuzzy Tool Condition Monitoring for Turning Process [Paper]. IEEE International Conference on Fuzzy Systems (FUZZ 2016), Vancouver, B.C.. External link
Renaud, J. (2016). Préformage de tissus 3D interlock de carbone pour la fabrication de composites en injection flexible [Ph.D. thesis, École Polytechnique de Montréal]. Available
Renaud, J., Ruiz, E., & Laberge Lebel, L. (2016, May). Preforming of 3D carbon interlock fabrics for the manufacturing of composite parts with the flexible injection process [Paper]. SAMPE Long Beach 2016 Conference and Exhibition, Long Beach, CA, United states. External link
Renaud, J., Vernet, N., Ruiz, E., & Laberge Lebel, L. (2016). Creep compaction behavior of 3D carbon interlock fabrics with lubrication and temperature. Composites Part A: Applied Science and Manufacturing, 86, 87-96. External link
Rimpault, X. (2016). Tool Condition Monitoring and Surface Topography Analysis During the Machining of CFRP Composites [Ph.D. thesis, École Polytechnique de Montréal]. Available
Rimpault, X., Chatelain, J. F., Sapieha, J.-E., & Balazinski, M. (2016). Surface profile texture characterization of trimmed laminated composite in the stacking sequence direction. Journal of the International Measurement Confederation, 91, 84-92. External link
Rimpault, X., Chatelain, J.-F., Sapieha, J.-E., & Balazinski, M. (2016, May). Fractal Analysis of Cutting Force and Acoustic Emission Signals During CFRP Machining [Paper]. 7th CIRP Conference on High Performance Cutting (HPC 2016), Chemnitz, Germany. Published in Procedia CIRP, 46. External link
Rimpault, X., Chatelain, J.-F., Sapieha, J.-E., & Balazinski, M. (2016). Surface profile topography of trimmed and drilled carbon/epoxy composite. Procedia CIRP, 45, 27-30. Available
Robert, É., & Thomas, M. (2015, June). Numerical Investigation of a Confined Jet Array Penetrating into a Counterflow [Paper]. 5th International Conference on Jets, Wakes and Separated Flows (ICJWSF 2015), Stockholm, Sweden. External link
Ruiz, E., Courteau-Godmaire, H., Fotsing, R., Billotte, C., & Lévesque, M. (2016, June). Experimental and numerical analysis of defects in composite panels used in business aircrafts interior [Paper]. 8th International Conference on Times of Polymers and Composites: from Aerospace to Nanotechnology, Naples, Italy (4 pages). External link
Sabaghi, M. (2016). Design for Disassembly and Sustainability Assessment to Support Aircraft End-of-Life Treatment [Ph.D. thesis, École Polytechnique de Montréal]. Available
Sabaghi, M., Mascle, C., & Baptiste, P. (2016). Evaluation of products at design phase for an efficient disassembly at end-of-life. Journal of Cleaner Production, 116, 177-186. External link
Sabaghi, M., Mascle, C., Baptiste, P., & Rostamzadeh, R. (2016). Sustainability assessment using fuzzy-inference technique (SAFT): A methodology toward green products. Expert Systems With Applications, 56, 69-79. External link
Salazar Padron, F. A. (2016). Study of Symmetry-Breaking Instabilities in Axisymmetric Geometries [Ph.D. thesis, École Polytechnique de Montréal]. Available
Salino, V., & Hébert, A. (2016, May). On steady-state multiphysics stability and related in-core fuel management capabilities in DONJON5 [Paper]. Physics of Reactors (PHYSOR 2016), Sun Valley, ID. Unavailable
Salvat, N., Batailly, A., & Legrand, M. (2016). Two-dimensional modeling of unilateral contact-induced shaft precessional motions in bladed-disk/casing systems. International Journal of Non-Linear Mechanics, 78, 90-104. External link
Salvi, G., Aubin, C.-É., Le Naveaux, F., Wang, X., & Parent, S. (2016). Biomechanical analysis of Ponte and pedicle subtraction osteotomies for the surgical correction of kyphotic deformities. European Spine Journal, 25(8), 2452-2460. External link
Samadi, B., Achiche, S., Parent, A., Ballaz, L., Chouinard, U., & Raison, M. (2016). Custom sizing of lower limb exoskeleton actuators using gait dynamic modelling of children with cerebral palsy. Computer Methods in Biomechanics and Biomedical Engineering, 19(14), 1519-1524. External link
Sansas, F. (2016). Simulation numérique de la dynamique d'une structure élancée flexible dans un écoulement de fluide compressible [Master's thesis, École Polytechnique de Montréal]. Available
Sarcher, A., Brochard, S., Raison, M., Leboeuf, F., Perrouin-Verbe, B., & Gross, R. (2016). Évaluation de la chirurgie de réanimation de l'extension du coude chez des patients tétraplégiques C5/C6 par l'analyse du mouvement. Clinical Neurophysiology, 46(4-5), 279-279. External link
Sarcher, A., Brochard, S., Raison, M., Leboeuf, F., Perrouin-Verbe, B., Letellier, G., & Gross, R. (2016). Effet d'une thérapie motrice induite par la contrainte sur la cinématique et l'activation musculaire du membre supérieur atteint d'enfants hémiparétiques. Clinical Neurophysiology, 46(4-5), 279-279. External link
Sartuqui, J., Gravina, A. N., Rial, R., Benedini, L. A., Yahia, L., Ruso, J. M., & Messina, P. V. (2016). Biomimetic fiber mesh scaffolds based on gelatin and hydroxyapatite nano-rods: designing intrinsic skills to attain bone reparation abilities. Colloids and Surfaces B: Biointerfaces, 145, 382-391. External link
Sattout, A., Clin, J., Cobetto, N., Labelle, H., & Aubin, C.-É. (2016). Biomechanical Assessment of Providence Nighttime Brace for the Treatment of Adolescent Idiopathic Scoliosis. Spine Deformity, 4(4), 253-260. External link
Schmidt, H., Reitmaier, S., Graichen, F., & Shirazi-Adl, A. (2016). Review of the fluid flow within intervertebral discs - How could in vitro measurements replicate in vivo? Journal of Biomechanics, 49(14), 3133-3146. External link
Schmidt, H., Schilling, C., Puente Reyna, A. L., Shirazi-Adl, A., & Dreischarf, M. (2016). Fluid-flow dependent response of intervertebral discs under cyclic loading: On the role of specimen preparation and preconditioning. Journal of Biomechanics, 49(6), 846-856. External link
Schmidt, H., Shirazi-Adl, A., Schilling, C., & Dreischarf, M. (2016, July). Influence of preload on intervertebral disc stiffness in loading-unloading cycles of compression [Paper]. 22nd Congress of the European Society of Biomechanics, Lyon, France. External link
Schmidt, H., Shirazi-Adl, A., Schilling, C., & Dreischarf, M. (2016). Preload substantially influences the intervertebral disc stiffness in loading-unloading cycles of compression. Journal of Biomechanics, 49(9), 1926-1932. External link
Shahvarpour, A., Shirazi-Adl, A., & Lariviere, C. (2016). Active-passive biodynamics of the human trunk when seated on a wobble chair. Journal of Biomechanics, 49(6), 939-945. External link
Shirazi-Adl, A., Schmidt, H., & Kingma, I. (2016). Spine Loading and Deformation - From Loading to Recovery. Journal of Biomechanics, 49(6), 813-816. External link
Silvant, S., Gaudart, G., Huguenot, P., Kieffel, Y., Perret, M., Robin-Jouan, P., Vigouroux, D., Fray, R., Cressault, Y., Teulet, P., & Trépanier, J.-Y. (2016, August). Detailed analysis of live tanks and GIS circuit breakers using a new environmental friendly gas [Paper]. International Council on Large Electric Systems (CIGRE Session 46), Paris, France. External link
Sommier, E., Fotsing, E.-R., Ross, A., & Lavoie, M. (2016). Characterization of the injection molding process of passive vibration isolators. Journal of Elastomers and Plastics, 48(1), 58-79. External link
Spitler, J. D., & Bernier, M. (2016). Vertical borehole ground heat exchanger design methods. In Advances in ground-source heat pump systems (29-61). External link
Stavenuiter, R. A. J., Birglen, L., & Herder, J. L. (2016). A planar underactuated grasper with adjustable compliance. Mechanism and Machine Theory, 12, 295-306. External link
Therriault, D. (2016, February). 3D printing of multifunctional composites and polymers [Paper]. Gordon Research Conference, Symposium on Multifunctional materials, Ventura, USA. Unavailable
Thiriet, M., Sheu, W.-H., & Garon, A. (2016). Biofluid flow and heat transfer. In Handbook of Fluid Dynamics (30.1-30.28). External link
Thong, W., Parent, S., Wu, J., Aubin, C.-É., Labelle, H., & Kadoury, S. (2016). Three-dimensional morphology study of surgical adolescent idiopathic scoliosis patient from encoded geometric models. European Spine Journal, 25(10), 3104-3113. External link
Vafaeian, S., Fattah-alhosseini, A., Mazaheri, Y., & Keshavarz, M. K. (2016). On the study of tensile and strain hardening behavior of a thermomechanically treated ferritic stainless steel. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 669, 480-489. External link
Vakili-Azghandi, M., Fattah-alhosseini, A., & Keshavarz, M. K. (2016). Effects of Al2O3 nano-particles on corrosion performance of plasma electrolytic oxidation coatings formed on 6061 aluminum alloy. Journal of Materials Engineering and Performance, 25(12), 5302-5313. External link
Vallières, M.-C. (2016). Validation d'un modèle unidimensonnel pour l'étude d'un écoulement instationnaire dans une turbine [Master's thesis, École Polytechnique de Montréal]. Available
Vasilevskiy, D., Simard, J. M., Caillat, T., Masut, R. A., & Turenne, S. (2016). Consistency of ZT-Scanner for Thermoelectric Measurements from 300 K to 700 K: A Comparative Analysis Using Si₈₀Ge₂₀ Polycrystalline Alloys. Journal of Electronic Materials, 45(3), 1540-1547. External link
Vasilevskiy, D., Simard, J. M., Masut, R. A., & Turenne, S. (2016). Reduction of Specimen Size for the Full Simultaneous Characterization of Thermoelectric Performance. Journal of Electronic Materials, 46(5), 3007-3011. External link
Veilleux, L. N., Raison, M., Rauch, F., Robert, M., & Ballaz, L. (2016). Agreement of spatio-temporal gait parameters between a vertical ground reaction force decomposition algorithm and a motion capture system. Gait & Posture, 43, 257-264. External link
Vernet, N., & Trochu, F. (2016). Analysis and modeling of 3D interlock fabric compaction behavior. Composites Part A: Applied Science and Manufacturing, 80, 182-193. External link
Vernet, N., & Trochu, F. (2016). Analysis of mesoscopic pore size in 3D-interlock fabrics and validation of a predictive permeability model. Journal of Reinforced Plastics and Composites, 35(6), 471-486. External link
Villalpando, F., Reggio, M., & Ilinca, A. (2016). Prediction of ice accretion and anti-icing heating power on wind turbine blades using standard commercial software. Energy, 114, 1041-1052. External link
Vo, H. D., & Trépanier, J.-Y. (2016). Undergraduate Project in Compressor Rig Design, Fabrication, and Testing for Complete Engineering Training. Journal of Engineering for Gas Turbines and Power, 138(5), 13 pages. External link
Vo, H. D., Cevik, M., & Erler, E. (2016). Compressor casing. (Patent Application no. US20160040546). External link
Wang, X., Boyer, L., Le Naveaux, F., Schwend, R. M., & Aubin, C.-É. (2016). How does differential rod contouring contribute to 3-dimensional correction and affect the bone-screw forces in adolescent idiopathic scoliosis instrumentation? Clinical Biomechanics, 39, 115-121. External link
Wang, X., Crandall, D. G., Parent, S., Larson, N., Labelle, H., & Aubin, C.-É. (2016, May). Biomechanical effect of pedicle screw distribution in AIS instrumentation using segmental translation technique: Preliminary results [Paper]. 13th International Conference on Conservative Management of Spinal Deformities and First Joint Meeting of the International Research Society on Spinal Deformities and the Society on Scoliosis Orthopaedic and Rehabilitation Treatment (SOSORT-IRSSD 2016), Banff, Alberta. External link
Wang, X., Larson, A. N., Crandall, D. G., Parent, S., Labelle, H., Ledonio, C. G. T., & Aubin, C.-É. (2016, October). Does variation in pedicle screw pattern affect deformity correction and bone-screw forces in adolescent idiopathic scoliosis instrumentation using polyaxial screws with dorsal height adjustability? [Paper]. 46e Réunion annuelle de la Société de scoliose du Québec, Estérel, QC. Unavailable
Wasselet, M. (2016). Calcul des forces et moments sur des corps immergés par la méthode des éléments spectraux [Master's thesis, École Polytechnique de Montréal]. Available
Wen, J., Blanchet, L., Dal Maso, F., Achiche, S., & Raison, M. (2016, May). Towards the identification of the most realistic strategy of muscle force distribution during movement cycles [Paper]. Joint International Conference on Multibody System Dynamics (IMSD 2016), Montréal, Québec. Unavailable
Xing, J. (2016). Modélisation numérique d'un actionneur plasma de type décharge à barrière diélectrique par la méthode de dérive-diffusion [Master's thesis, École Polytechnique de Montréal]. Available
Xu, C., Bouchemit, A., L'Espérance, G., Laberge Lebel, L., & Therriault, D. (2016, August). Three-dimensional direct-write printing of metallic microstructures [Poster]. International conference of theoretical and applied mechanics (ICTAM 2016), Montréal, Québec. Unavailable
Younsi, R., & Detuncq, B. (2016). Systèmes de pompage ventilation et compression: Théorie et application. Unavailable
Younsi, R., & Detuncq, B. (2016, July). Using experimental investigation for educational purposes: two-stage compressor [Paper]. 8th International Conference on Education and New Learning Technologies (EDULEARN 2016), Barcelona, Spain. External link
Yu, K. R., Étienne, S., Scolan, Y.-M., Hay, A., Fontaine, E., & Pelletier, D. (2016). Flow-induced vibrations of in-line cylinder arrangements at low Reynolds numbers. Journal of Fluids and Structures, 60, 37-61. External link
Zadeh, F. M., Étienne, S., Chambon, R., Marleau, G., & Teyssedou, A. (2016). Effect of 3-D moderator flow configurations on the reactivity of CANDU nuclear reactors. Annals of Nuclear Energy, 99, 136-150. External link
Zahedi, H. (2016). End-of-Life Efficient Disassembly of Complex Structures Using Product and Process Focused Approach [Ph.D. thesis, École Polytechnique de Montréal]. Available
Zahedi, H., Mascle, C., & Baptiste, P. (2016). A quantitative evaluation model to measure the disassembly difficulty; application of the semi-destructive methods in aviation End-of-Life. International Journal of Production Research, 54(12), 3736-3748. External link
Zimmermann, E. A., Londono, I., Moldovan, F., & Villemure, I. (2016, March). In-situ cellular biomechanics under stress-controlled static vs. dynamic compression of growth plates [Paper]. Journée scientifique du RSBO 2016, Montréal, Québec. Unavailable
Zizoua, C., Raison, M., Boukhenous, S., Attari, M., & Achiche, S. (2016). Detecting muscle contractions using strain gauges. Electronics Letters, 52(22), 1836-1838. External link
Zou, S., Therriault, D., & Gosselin, F. (2016, August). Unfolding process of coiling fibers fabricated by instability-assisted fused deposition modeling [Paper]. International conference of theoretical and applied mechanics (ICTAM 2016), Montréal, Québec. External link