<  Back to the Polytechnique Montréal portal

Items where Division is "Department of Mechanical Engineering"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors | Document subtype | No Grouping
Jump to: A | B | C | D | E | F | G | H | J | K | L | M | N | O | P | R | S | T | V | W | X | Z
Number of items: 227.

A

Abderrefai, Y., Diouf Lewis, A., Farahani, R. D., & Therriault, D. (2020). Objective 1: Design and formulate different HTRT materials (PEI or PEEK) reinforced with carbon fibers. (Technical Report). Unavailable

Absi, C. (2020). Développement de rivets en composite de carbone et poly(étheréthercétone) pour les structures aéronautiques [Master's thesis, Polytechnique Montréal]. Available

Ajaja, J., Jomaa, W., Bocher, P., Chromik, R. R., & Brochu, M. (2020). High cycle fatigue behavior of hard turned 300 M ultra-high strength steel. International Journal of Fatigue, 131, 12 pages. External link

Ali, M. S. (2020). Two Dimensional Compressible Flow Solver for Moving Geometries Using Immersed Boundary Method [Master's thesis, Polytechnique Montréal]. Available

Alloui, Z., Ouzani, R., & Vasseur, P. (2020). Thermocapillary-buoyancy convection of a power-law fluid layer heated from below. Journal of Non-Newtonian Fluid Mechanics, 282, 13 pages. External link

Amiri, S. (2020). Transitional Flow Prediction in High Reynolds Flows Over Hydrofoils [Ph.D. thesis, Polytechnique Montréal]. Available

Anahid, M. J., Heydarnia, H., Niknam, S. A., & Mehmanparast, H. (2020). Evaluating the sensitivity of acoustic emission signal features to the variation of cutting parameters in milling aluminum alloys: Part A: frequency domain analysis. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 235(10), 1558-1568. External link

Ashrafi, F. (2020). Passive Flow Control at Impeller Radial Bend for Stall Delay in Centrifugal Compressors with Fishtail Pipe Diffusers [Ph.D. thesis, Polytechnique Montréal]. Restricted access

Aujogue, N., Ross, A., & Attendu, J.-M. (2020). Time-space domain nearfield acoustical holography for visualizing normal velocity of sources. Mechanical Systems and Signal Processing, 139, 106363 (13 pages). External link

B

Bag, A., Delbergue, D., Ajaja, J., Bocher, P., Lévesque, M., & Brochu, M. (2020). Effect of different shot peening conditions on the fatigue life of 300M steel submitted to high stress amplitudes. International Journal of Fatigue, 130, 12 pages. External link

Bahrami Torabi, H. (2020). Finite Element Model to Investigate the Dynamic Instability of a Rectangular Plate Subjected to Supersonic Airflow [Master's thesis, Polytechnique Montréal]. Available

Bakhtiari, M. (2020). Nonlinear vibration and Supersonic Flutter of Conical Shells [Ph.D. thesis, Polytechnique Montréal]. Available

Bakhtiari, M., Lakis, A. A., & Kerboua, Y. (2020). Nonlinear supersonic flutter of truncated conical shells. Journal of Mechanical Science and Technology, 34(4), 1375-1388. External link

Bakhtiari, M., Lakis, A. A., & Kerboua, Y. (2020). Nonlinear Vibration of Truncated Conical Shells: Donnell, Sanders and Nemeth Theories. International Journal of Nonlinear Sciences and Numerical Simulation, 21(1), 83-97. External link

Barron, O., Raison, M., & Achiche, S. (2020). Control of transhumeral prostheses based on electromyography pattern recognition: from amputees to deep learning. In Powered Prostheses (1-21). External link

Barron, O., Raison, M., Gaudet, G., & Achiche, S. (2020). Recurrent Neural Network for electromyographic gesture recognition in transhumeral amputees. Applied Soft Computing Journal, 96, 9 pages. External link

Beauséjour, M., Vaillancourt, F., Akoume, M.-Y., Franco, A., Parent, S., Labelle, H., Joncas, J., Desbiens-Blais, F., Mac-Thiong, J.-M., Roy-Beaudry, M., Aubin, C.-É., & Moreau, A. (2020). Patient outcomes in idiopathic scoliosis are associated with biological endophenotypes: 2020 SOSORT award winner. European Spine Journal, 30(5), 1125-1131. External link

Bellemare, J., Laliberté-Riverin, S., Ménard, D., Brochu, M., & Sirois, F. (2020). Coating density as the key factor behind hydrogen embrittlement of cadmium-plated 4340 steel. Journal of Applied Electrochemistry, 50(10), 1045-1058. External link

Bellemare, J., Laliberte-Riverin, S., Ménard, D., Brochu, M., & Sirois, F. (2020). Subtleties Behind Hydrogen Embrittlement of Cadmium-Plated 4340 Steel Revealed by Thermal Desorption Spectroscopy and Sustained-Load Tests. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 51, 3054-3065. External link

Belot, I., Vidal, D., Votsmeier, M., Hayes, R. E., & Bertrand, F. (2020). Numerical investigation of the impact of washcoat distribution on the filtration performance of gasoline particulate filters. Chemical Engineering Science, 221, 115656. Available

Ben Youssef, Y., Lakis, A. A., & Kerboua, Y. (2020). Développement d'une formulation pour l'étude du comportement dynamique non linéaire des coques cylindriques isotropes. (Technical Report n° EPM-RT-2020-01). Available

Benoit, D., Wang, X., Crandall, D. G., & Aubin, C.-É. (2020). Biomechanical analysis of sagittal correction parameters for surgical instrumentation with pedicle subtraction osteotomy in adult spinal deformity. Clinical Biomechanics, 71, 45-52. External link

Bérard, F. P. (2020). Une application de la méthode des vitesses et de l'interpolation transfinie à la modélisation de l'interaction fluide-structure d'un cylindre circulaire [Master's thesis, Polytechnique Montréal]. Available

Blanchet, L. (2020). Development of a Procedure to Optimize the Geometric and Dynamic Designs of Assistive Upper Limb Exoskeletons [Master's thesis, Polytechnique Montréal]. Available

Bodkhe, S., & Ermanni, P. (2020). 3D printing of multifunctional materials for sensing and actuation: Merging piezoelectricity with shape memory. European Polymer Journal, 132, 8 pages. External link

Bodkhe, S., Vigo, L., Zhu, S., Testoni, O., Aegerter, N., & Ermanni, P. (2020). 3D printing to integrate actuators into composites. Additive Manufacturing, 35, 8 pages. External link

Boudina, M. (2020). On the Mechanics of Flow-Induced Vibration of Soft Corals and Particle Interception [Master's thesis, Polytechnique Montréal]. Available

Boudina, M., Gosselin, F., & Étienne, S. (2020). Direct interception or inertial impaction? A theoretical derivation of the efficiency power law for a simple and practical definition of capture modes. Physics of Fluids, 32(12), 123603 (9 pages). External link

Boulvert, J. (2020). Traitements acoustiques à porosité contrôlée pour atténuation optimale [Ph.D. thesis, Polytechnique Montréal]. Available

Boulvert, J., Costa-Baptista, J., Cavalieri, T., Perna, M., Fotsing, E. R., Romero-Garcia, V., Gabard, G., Ross, A., Mardjono, J., & Groby, J.-P. (2020). Acoustic modeling of micro-lattices obtained by additive manufacturing. Applied Acoustics, 164, 9 pages. External link

Boulvert, J., Costa-Baptista, J., Cavalieri, T., Romero-Garcia, V., Gabard, G., Fotsing, E. R., Ross, A., Perna, M., Mardjono, J., & Groby, J.-P. (2020). Folded metaporous material for sub-wavelength and broadband perfect sound absorption. Applied Physics Letters, 117(25), 6 pages. External link

Bourdin, T., Bédard, É., Benoit, M.-E., Prévost, M., Robert, É., Quach, C., Deziel, E., & Constant, P. (2020). Development of a New High-Throughput Multilocus Sequence Typing Method to Monitor Causative Agents of Nosocomial Infections. Infection Control and Hospital Epidemiology, 41, S187-S187. External link

Bouscarrat, D., Lévesque, M., & Vieille, B. (2020). Influence of time-dependent phenomena on translaminar fracture of woven-ply C/PPS laminates above the glass transition temperature. Composites Part B: Engineering, 180, 11 pages. External link

Bretin, R., Lévesque, M., Pilvin, P., & Bocher, P. (2020). Neighborhood effect within polycrystalline materials: Elastoplastic micromechanical analysis by cellular automaton and finite element. International Journal of Fatigue, 137, 16 pages. External link

Breumier, S., Sao-Joao, S., Villani, A., Lévesque, M., & Kermouche, G. (2020). High strain rate micro-compression for crystal plasticity constitutive law parameters identification. Materials and Design, 193, 17 pages. External link

Brideau, S. A., Beausoleil-Morrison, I., & Kummert, M. (2020). Effects of controls and floor construction of radiant floor heating systems for residential application with high variability of solar gains. Science and Technology for the Built Environment, 26(4), 524-540. External link

Broggi, C. (2020). Conception et fabrication additive d'une structure bio-inspirée pour un rover lunaire en composites thermoplastiques [Master's thesis, Polytechnique Montréal]. Available

C

Cavalieri, T., Boulvert, J., Gabard, G., Romero-Garcia, V., Escouflaire, M., Regnard, J., & Groby, J.-P. (2020). Graded and anisotropic porous materials for broadband and angular maximal acoustic absorption. Materials, 13(20), 19 pages. Available

Chauvette, J.-F., Hia, I. L., Brzeski, D., Farahani, R. D., & Therriault, D. (2020). Objective 4: Develop a printing process for direct deposition of acoustic abradable materials on composite structures featuring flat and curved geometries. (Technical Report). Unavailable

Chouinard, U., Cio, Y.-S. L.-K., Vadean, A., & Achiche, S. (2020, October). Concurrent modeling of positive and negative dependencies in the design structure matrix using complex numbers [Paper]. 22nd International Dependency and Structure Modeling Conference (DSM 2020), Cambridge, Massachusetts. External link

Cobetto, N., Aubin, C.-É., & Parent, S. (2020). Anterior Vertebral Body Growth Modulation: Assessment of the 2-year Predictive Capability of a Patient-specific Finite-element Planning Tool and of the Growth Modulation Biomechanics. Spine, 45(18), E1203-E1209. External link

Coulombe, C., Gamache, J.-F., Barron, O., Descôteaux, G., Saussié, D., & Achiche, S. (2020, August). Task Taxonomy for Autonomous Unmanned Aerial Manipulator: A Review [Paper]. ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. External link

Couture, A. (2020). Linear Stability Analysis of Fluid-Structure Problems Using Time-Linearized Coupled Formulations [Master's thesis, Polytechnique Montréal]. Available

Couture-Peck, D. (2020). Une application de la méthode des vitesses et de l'interpolation transfinie à la modélisation de l'interaction fluide-structure d'un cylindre elliptique oscillant [Master's thesis, Polytechnique Montréal]. Available

Couture-Peck, D., Garon, A., & Delfour, M. C. (2020). A new k-TMI/ALE fluid-structure formulation to study the low mass ratio dynamics of an elliptical cylinder. Journal of Computational Physics, 422, 32 pages. External link

Cupeiro Figueroa, I., Cimmino, M., & Helsen, L. (2020). A methodology for long-term model predictive control of hybrid geothermal systems: the shadow-cost formulation. Energies, 13(23), 27 pages. Available

D

Darwish, A., Di Labbio, G., Saleh, W., & Kadem, L. (2020). In vitro characterization of Lagrangian fluid transport downstream of a dysfunctional bileaflet mechanical aortic valve. AIP Advances, 10(9), 095319 (15 pages). Available

de Lima, L. A. P., Achiche, S., de Lucas, R. D., & Raison, M. (2020). Second-order simultaneous components model for the overshoot and “slow component” in V̇O₂ kinetics. Respiratory Physiology & Neurobiology, 280, 10 pages. External link

de Lima, L. A. P., de Lucas, R. D., Raison, M., & Achiche, S. (2020). Is the understanding of VO₂ kinetics biased by the first-order multi-exponential model? Pflügers Archiv-European Journal of Physiology, 472(12), 1661-1663. External link

Delcroix, B., Le Ny, J., Bernier, M., Azam, M., Qu, B., & Venne, J.-S. (2020). Autoregressive neural networks with exogenous variables for indoor temperature prediction in buildings. Building Simulation. Available

Delhez, E., Golinval, J.-C., Nyssen, F., & Batailly, A. (2020, September). Comparative study of blades reduced order models with geometrical nonlinearities and contact interfaces [Paper]. ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition (GT 2020) (12 pages). External link

Delorme, R., Diehl, P., Tabiai, I., Laberge Lebel, L., & Lévesque, M. (2020). Extracting constitutive mechanical parameters in linear elasticity using the virtual fields method within the ordinary state-based peridynamic framework. Journal of Peridynamics and Nonlocal Modeling, 2(2), 111-135. External link

Descôteaux, G. (2020). Système autonome d'assistance au repas pour les personnes avec un handicap du haut du corps [Master's thesis, Polytechnique Montréal]. Available

Desmarais, A. (2020). Extension of a 2D Multiblock Structured Overset Suite to a Fully 3D Multiblock Unstructured Flow Solver [Master's thesis, Polytechnique Montréal]. Available

Dhar, L. (2020). Étude de l'injection d'air à travers des fentes dans un écoulement d'eau transverse [Master's thesis, Polytechnique Montréal]. Available

Di Fratta, C., Sun, Y., Causse, P., & Trochu, F. (2020). A dimensionless characteristic number for process selection and mold design in composites manufacturing : part I — theory. Journal of Composites Science, 4(1), 11 (16 pages). Available

Di Fratta, C., Sun, Y., Causse, P., & Trochu, F. (2020). A Dimensionless Characteristic Number for Process Selection and Mold Design in Composites Manufacturing: Part II-Applications. Journal of Composites Science, 4(1), 10 (17 pages). External link

Di Labbio, G., Ait Abderrahmane, H., Fayed, M., & Ng, H. D. (2020). Transitions between systems of satellite vortices in a rotating fluid. Physics of Fluids, 32(10), 101701 (6 pages). Available

Diehl, P., Jha, P. K., Kaiser, H., Lipton, R., & Lévesque, M. (2020). An asynchronous and task-based implementation of peridynamics utilizing HPXthe C++ standard library for parallelism and concurrency. SN Applied Sciences, 2(12), 21 pages. External link

Diouf-Lewis, A., Mastromatteo, L., Farahani, R. D., Piccirelli, N., & Therriault, D. (2020, November). Characterization and additive manufacturing of aerospace-grade thermoplastics composites [Paper]. 7th Global Conference on Polymer and Composite Materials (PCM 2020). Unavailable

Dube-Cyr, R., Aubin, C.-É., Villemure, I., Bianco, R.-J., Godio-Raboutet, Y., & Arnoux, P.-J. (2020). Biomechanical analysis of two insertion sites for the fixation of the sacroiliac joint via an oblique lateral approach. Clinical Biomechanics, 74, 118-123. External link

Dubost, C. (2020). Roue Cyr et matériaux composites : modéliser une discipline de cirque pour enrichir son langage acrobatique [Master's thesis, Polytechnique Montréal]. Available

Duperré, A. (2020). Guidage et planification réactive de trajectoire d'un drone monoculaire contrôlé par intelligence artificielle [Master's thesis, Polytechnique Montréal]. Available

E

Eca, L., Vaz, G., Hoekstra, M., Pal, S., Muller, E., Pelletier, D., Bertinetti, A., Difonzo, R., Savoldi, L., Zanino, R., Zappatore, A., Chen, Y., Maki, K. J., Ye, H., Drofelnik, J., Moss, B., & Da Ronch, A. (2020). Overview of the 2018 workshop on iterative errors in unsteady flow simulations. Journal of Verification, Validation and Uncertainty Quantification, 5(2), 13 pages. External link

Eftekhari, N., Muhammad, W., Haftlang, F., Zarei-Hanzaki, A., & Martin, É. (2020). Microstructural evolution and corrosion behavior of Sanicro 28 during thermomechanical processing. Materials Today Communications, 24, 10 pages. External link

Escaich, C., Shi, Z., Baron, L., & Balazinski, M. (2020). Machining of titanium metal matrix composites : progress overview. Materials, 13(21), 5011 (18 pages). Available

Eslami Nejad, P., Cimmino, M., Nguyen, A., Badache, M., & Bastani, A. (2020). Performance comparison of a vertical direct expansion geothermal evaporator: PART II, multiple U-pipes. International Journal of Refrigeration, 116, 161-171. External link

Eslami Nejad, P., Nguyen, A., Cimmino, M., Bastani, A., & Badache, M. (2020). Performance comparison of a vertical direct expansion geothermal evaporator: Part I, single U-pipe using different refrigerants. [Comparaison des performances d'un évaporateur géothermique vertical à détente directe: Partie I, Tuyauterie en U unique avec différents frigorigènes]. External link

Esmaeili, S. M., & Mayer, J. R. R. (2020). Generation of a 3D error compensation grid from ISO 230-1 error parameters obtained by a SAMBA indirect calibration and validated by a ball-bar spherical test. International Journal of Advanced Manufacturing Technology, 106(11-12), 4649-4662. External link

Esmaeili, S., & Mayer, J. R. R. (2020). An integrated geometric and hysteretic error model of a three axis machine tool and its identification with a 3D telescoping ball-bar. Journal of Manufacturing and Materials Processing, 4(1), 14 pages. Available

F

Falsafioon, M., Arabi, S., Camarero, R., & Guibault, F. (2020). Moving meshes in complex configurations using the composite sliding grid method. Computers & Fluids, 206, 104256 (16 pages). External link

Farahani, R. D., & Therriault, D. (2020). Advanced manufacturing of composites for structural and acoustic applications. (Technical Report). Unavailable

Farahani, R. D., Lévesque, M., & Therriault, D. (2020). Advanced manufacturing of composites for structural and acoustic applications. (Technical Report). Unavailable

Farahani, R. D., Lévesque, M., & Therriault, D. (2020). Advanced manufacturing of composites for structural and acoustic applications. (Technical Report). Unavailable

Fernandez-Escudero, C., Gagnon, M., Laurendeau, É., Prothin, S., Ross, A., & Michon, G. (2019, January). Experimental and Numerical Aeroelastic Analysis of Airfoil-Aileron System with Nonlinear Energy Sink [Paper]. 37th IMAC, A Conference and Exposition on Structural Dynamics, Orlando, FL, United states. External link

Fortier, V., Brunel, J.- E., & Laberge Lebel, L. (2020). Fastening composite structures using braided thermoplastic composite rivets. Journal of Composite Materials, 54(6), 801-812. External link

Fortin, S., Étienne, S., Béguin, C., Pelletier, D., & Brosset, L. (2020). Numerical study of the influence of weber and reynolds numbers on the development of kelvinhelmholtz instability. International Journal of Offshore and Polar Engineering, 30(2), 129-140. External link

Fradet, L., Bianco, R.-J., Tatsumi, R., Coleman, J., & Aubin, C.-É. (2020). Biomechanical comparison of sacral and transarticular sacroiliac screw fixation. Spine Deformity, 8(5), 853-862. External link

François, T., Tabone, L., Levy, A., Seguin, L. A., Touré, T., Aubin, C.-É., Jouvet, P., & Luchette, F. A. (2020). Simulation-based rapid development and implementation of a novel barrier enclosure for use in COVID-19 patients : the splashGuard CG. Critical Care Research and Practice, 2020, 8 pages. Available

G

Gamache, J.-F., Vadean, A., Dodane, N., & Achiche, S. (2020, August). Topology Optimization for Stiffened Panels: A Ground Structure Method [Paper]. ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. External link

Garcia Perez, J. (2020). Lattice Boltzmann Approach for the Modeling and Simulation of Water Droplets Impact and Freezing [Master's thesis, Polytechnique Montréal]. Available

Garcia Perez, J., Trépanier, J.-Y., Leclaire, S., Reggio, M., & Benmeddour, A. (2020). Lattice Boltzmann approach for the modeling and simulation of water droplets impact and freezing. (Technical Report). Unavailable

Garon, A., & Delfour, M. C. (2020). Mesh adaptation based on transfinite mean value interpolation. Journal of Computational Physics, 407, 109248 (31 pages). External link

Ghezelbash, F., Eskandari, A. H., Shirazi-Adl, A., Kazempour, M., Tavakoli, J., Baghani, M., & Costi, J. J. (2020). Modeling of Human Intervertebral Disc Annulus Fibrosus with Complex Multi-Fiber Networks. SSRN Electronic Journal, 41 pages. External link

Ghezelbash, F., Schmidt, H., Shirazi-Adl, A., & El-Rich, M. (2019, July). Internal load-sharing in the human passive lumbar spine: Review of in vitro and finite element model studies [Paper]. 3rd International Workshop on Spinal and Deformation, Berlin, Germany (11 pages). Published in Journal of Biomechanics, 102. External link

Ghezelbash, F., Shirazi-Adl, A., Baghani, M., & Eskandari, A. H. (2019, July). On the modeling of human intervertebral disc annulus fibrosus: Elastic, permanent deformation and failure responses [Paper]. 3rd International Workshop on Spinal Loading and Deformation, Berlin, Germany (10 pages). Published in Journal of Biomechanics. External link

Ghezelbash, F., Shirazi-Adl, A., El Ouaaid, Z., Plamondon, A., & Arjmand, N. (2019, July). Subject-specific regression equations to estimate lower spinal loads during symmetric and asymmetric static lifting [Paper]. 3rd International Workshop on Spinal Loading and Deformation, Berlin, Germany (12 pages). Published in Journal of Biomechanics, 102. External link

Ghezelbash, F., Shirazi-Adl, A., Plamondon, A., & Arjmand, N. (2020). Comparison of different lifting analysis tools in estimating lower spinal loads Evaluation of NIOSH criterion. Journal of Biomechanics, 112, 110024 (6 pages). External link

Gondran, M. (2020). Tressage automatisé de pièces complexes avec solution inverse itérative asservie en angle [Master's thesis, Polytechnique Montréal]. Available

Guo, Z., Ma, Y., & Rigaud, M. (2020). Sinterability of macrocrystalline and cryptocrystalline magnesite to refractory magnesia. International Journal of Ceramic Engineering & Science, 2(6), 303-309. Available

H

Hébert, A. (2020). Applied Reactor Physics. Unavailable

Hébert, A. (2020). A general presentation of the SPH equivalence technique in non-fundamental mode cases. Annals of Nuclear Energy, 141, 10 pages. External link

Hernandez, S., Achiche, S., Spooner, D., Vadean, A., & Raison, M. (2020, August). On Supporting the Learning of Biomechanics Using Multidisciplinary Physical Prototyping [Paper]. ASME 2020 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (10 pages). External link

Hodonou, C. M. É. (2020). Méthode de sélection systématique des procédés de fabrication des composants structuraux d'aéronefs pour une production économique et écologique [Ph.D. thesis, Polytechnique Montréal]. Available

Hodonou, C., Kerbrat, O., Balazinski, M., & Brochu, M. (2020). Process selection charts based on economy and environment: subtractive or additive manufacturing to produce structural components of aircraft. International Journal on Interactive Design and Manufacturing (IJIDeM), 14(3), 861-873. External link

Huang, W. (2020). Analysis of Through-Thickness Injection in Liquid Composite Molding Based on Digital Material Twins [Ph.D. thesis, Polytechnique Montréal]. Available

Huang, W., Causse, P., Hu, H., & Trochu, F. (2020). Numerical and experimental investigation of saturated transverse permeability of 2D woven glass fabrics based on material twins. Polymer Composites, 41(4), 1341-1355. External link

Huang, W., Causse, P., Hu, H., Belouettar, S., & Trochu, F. (2020). Transverse compaction of 2D glass woven fabrics based on material twins Part I: Geometric analysis. Composite Structures, 237, 10 pages. External link

Huang, W., Causse, P., Hu, H., Belouettar, S., & Trochu, F. (2020). Transverse compaction of 2D glass woven fabrics based on material twins Part II: Tow and fabric deformations. Composite Structures, 237, 8 pages. External link

J

Jadayel, M., & Khameneifar, F. (2020). Improving geometric accuracy of 3D printed parts using 3D metrology feedback and mesh morphing. Journal of Manufacturing and Materials Processing, 4(4), 112 (15 pages). Available

Jadayel, M., & Khameneifar, F. (2020, June). Improving the geometric accuracy of additive manufactured parts via 3D metrology feedback and CAD morphing [Poster]. 3rd Holistic Innovation in Additive Manufacturing Conference (HI-AM 2020). Unavailable

Jamshidi, M., Rimpault, X., Balazinski, M., & Chatelain, J.-F. (2020). Fractal analysis implementation for tool wear monitoring based on cutting force signals during CFRP/titanium stack machining. International Journal of Advanced Manufacturing Technology, 106(9-10), 3859-3868. External link

Joachim, J. (2020). Développement de modèles numériques de roues aubagées désaccordées dans un contexte non-linéaire [Ph.D. thesis, Polytechnique Montréal]. Available

K

Kang, H. S., & Mureithi, N. W. (2020). Annular-flow-induced vibrations of a simply-supported tube in a finite-length narrow-gap support. Nuclear Engineering and Design, 364, 110680 (12 pages). External link

Kathirgamanathan, A., Pean, T., Zhang, K., De Rosa, M., Salom, J., Kummert, M., & Finn, D. P. (2020). Towards standardising market-independent indicators for quantifying energy flexibility in buildings. Energy and Buildings, 220, 16 pages. External link

Khoddam-Khorasani, P., Arjmand, N., & Shirazi-Adl, A. (2020). Effect of changes in the lumbar posture in lifting on trunk muscle and spinal loads: A combined in vivo, musculoskeletal, and finite element model study. Journal of Biomechanics, 104, 169-178. External link

L

Laberge Lebel, L., & Alsinani, N. A. (2020). Pultrusion system with cooling stage and method therefor. (Patent Application no. WO2020237381). External link

Labrecque Nadeau, D. (2020). Outil d'aide à la conception de produits modulaires en vue de leur fin de vie [Master's thesis, Polytechnique Montréal]. Available

Laferrière, A., Cimmino, M., Picard, D., & Helsen, L. (2020). Development and validation of a full-time-scale semi-analytical model for the short- and long-term simulation of vertical geothermal bore fields. Geothermics, 86. Available

Lakis, A. J. (2020). Experimental and Analytical Stress and Strain Characterization of Notched Composite Plates [Master's thesis, Polytechnique Montréal]. Available

Lalande, V., Villemure, I., Parent, S., & Aubin, C.-É. (2020). Induced pressures on the epiphyseal growth plate with non segmental anterior spine tethering. Spine Deform, 8(4), 585-589. External link

Lalande, V., Villemure, I., Vonthron, M., Parent, S., & Aubin, C.-É. (2020). Cyclically controlled vertebral body tethering for scoliosis: an in vivo verification in a pig model of the pressure exerted on vertebral end plates. Spine Deform, 8(1), 39-44. External link

Laliberté-Riverin, S. (2020). Développement de nouvelles méthodes de mesure du seuil de fragilisation par hydrogène sur l'AISI 4340 électroplaqué [Ph.D. thesis, Polytechnique Montréal]. Available

Laliberte-Riverin, S., Bellemare, J., Sirois, F., & Brochu, M. (2020). Determination of hydrogen embrittlement stress intensity threshold by fractography. Materialia, 12, 12 pages. External link

Laliberte-Riverin, S., Bellemare, J., Sirois, F., & Brochu, M. (2020). Internal hydrogen embrittlement of pre-cracked, cadmium-plated AISI 4340 high strength steel with sustained load tests and incremental step-loading tests. Engineering Fracture Mechanics, 223, 106773 (13 pages). External link

Lallam, W. (2020). Analyse énergétique d'un système de pompe à chaleur transcritique au CO2 pour le chauffage combiné [Master's thesis, Polytechnique Montréal]. Available

Lambert, L., Pelletier, D., & Garon, A. (2020, January). Adaptive Construction of Model-Consistent Wall Functions for Two-Equation Turbulence Models with Applications [Paper]. AIAA Scitech 2020 Forum, Orlando, Floride. External link

Langot, J. (2020). Multi-Physics Modeling of Aerospace Composites Exposed to Fire [Ph.D. thesis, Polytechnique Montréal]. Available

Larson, A. N., Floccari, L. V., Garg, S., Erickson, M. A., Sponseller, P. D., Brito, J. P., Aubin, C.-É., & Polly, D. W. J. (2020). Willingness to enroll in a surgical randomized controlled trial: patient and parent preferences regarding implant density for adolescent idiopathic scoliosis fusion. Spine Deformity, 8(5), 957-963. External link

Law-Kam Cio, Y.-S., Ma, Y., Vadean, A., Beltrame, G., & Achiche, S. (2020, August). Objective reduction using axiomatic design and product-related dependencies : a layout synthesis of an autonomous greenhouse case study [Paper]. ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (10 pages). External link

Lebedev, O., Trofimov, A., Lévesque, M., & Therriault, D. (2020). Supplementary Objective 1: 3D reinforced composites manufactured by Resin Transfer Molding (RTM). (Technical Report). Unavailable

Leclaire, S., Vidal, D., Fradette, L., & Bertrand, F. (2020). Validation of the pressure drop-flow rate relationship predicted by lattice Boltzmann simulations for immiscible liquid-liquid flows through SMX static mixers. Chemical Engineering Research and Design, 153, 19 pages. External link

Lecoublet, B., Boisclair, D., Evin, M., Wagnac, E., Petit, Y., Aubin, C.-É., & Arnoux, P.-J. (2020). Assessing the Global Range of Motion of the Helmeted Head Through Rotational and Translational Measurements. International Journal of Crashworthiness, 25(3), 321-327. External link

Leroy, L. (2020). Modelling Neighborhood-Scale Energy Scenarios [Master's thesis, Polytechnique Montréal]. Available

Letellier-Duchesne, S., & Leroy, L. (2020). Archetypal : a Python package for collection, simulating, converting and analyzing building archetypes. Journal of Open Source Software, 5(50), 3 pages. External link

Letendre, F., Mehrabian, S., Étienne, S., & Cameron, C. B. (2020). The interactions of oil droplets with filter feeders: A fluid mechanics approach. Marine Environmental Research, 161, 11 pages. External link

Li, H., Poree, J., Chayer, B., Cardinal, M.-H. R., & Cloutier, G. (2020). Parameterized Strain Estimation for Vascular Ultrasound Elastography With Sparse Representation. IEEE Transactions on Medical Imaging, 39(12), 3788-3800. External link

Liguori, V., Papillon-Laroche, H., Parenteau, M., & Laurendeau, É. (2020, January). Design and Development of a Computational Fluid Dynamics Software in the Context of a Capstone Project [Paper]. AIAA Scitech 2020 Forum, Orlando, Florida. External link

Louyot, M., Nennemann, B., Monette, C., & Gosselin, F. (2020). Modal analysis of a spinning disk in a dense fluid as a model for high head hydraulic turbines. Journal of Fluids and Structures, 94, 20 pages. External link

Lussier, E., Martel, L., Spooner, D., & Dubreuil-Cousineau, M. (2020, June). Using CDIO to develop project learning activities for younger student [Paper]. 16th International CDIO Conference, Gothenburg, Sweden. External link

M

Ma, Y., Bock, G., Cherni, G., Lemire, B., Therrien, R., Thériault, L., Lessard, D., Engler, K., & Achiche, S. (2000, November). Meet Marvin, the CHATBOT : using artificial intelligence to engage HIV patients in their antiretroviral therapy [Presentation]. In Workshop on Healthy Living with HIV. External link

Ma, Y., Bock, G., Cherni, G., Thériault, L., Lessard, D., Achiche, S., & Lebouché, B. (2020, July). Marvin : Intelligent conversational agent for HIV patient self-management [Presentation]. In 23e Congrès international sur le sida (SIDA 2020). Unavailable

Ma, Y., Sanmiguel, D., Lessard, D., Thériault, L., Achiche, S., Arora, A., Mate, K., Lemire, B., Hijal, T., Schuster, T., Kildea, J., De Pokomandy, A., Cox, J., Kronfli, N., Klein, M., & Lebouché, B. (2020, July). Chatbot MARVIN: Development study of an Intelligent Conversational Agent to Promote HIV Patients' Engagement in Care and Management of ART Adherence Barriers [Poster]. 23rd International AIDS Conference (AIDS 2020: Virtual). External link

Madra, A., Van-Pham, D.-T., Nguyen, M.-T., Nguyen, C.-N., Breitkopf, P., & Trochu, F. (2020). Automated identification of defect morphology and spatial distribution in woven composites. Journal of Composites Science, 4(4), 178 (17 pages). Available

Mahecha, D., Beaudry, C., Armellini, F., & Aubin, C.-É. (2020, July). What can latent dirichlet allocation topic modeling say about ecosystems [Paper]. 3rd International Conference on Advanced Research Methods and Analytics (CARMA 2020). Unavailable

Malandra, F., Kizilkale, A. C., Sirois, F., Sanso, B., Anjos, M. F., Bernier, M., Gendreau, M., & Malhamé, R. P. (2020). Smart Distributed Energy Storage Controller (smartDESC). Energy, 210, 10 pages. External link

Marchionatti, E., Desrochers, A., Wenzlow, N., Villemure, I., & Theoret, C. L. (2020). In vitro biomechanical properties of sole tissues: Comparison between healthy and ulcerated bovine claws. Journal of Dairy Science, 103(7), 6412-6421. External link

Markov, A., Trofimov, A., & Sevostianov, I. (2020). Effect of non-planar cracks with islands of contact on the elastic properties of materials. International Journal of Solids and Structures, 191, 307-314. External link

Markov, A., Trofimov, A., & Sevostianov, I. (2020). A unified methodology for calculation of compliance and stiffness contribution tensors of inhomogeneities of arbitrary 2D and 3D shapes embedded in isotropic matrix open access software. International Journal of Engineering Science, 157, 15 pages. External link

Martin, É., Muhammad, W., Detor, A. J., Spinelli, I., Wessman, A., & Wei, D. (2020). “Strain-annealed” grain boundary engineering process investigated in Hastelloy-X. Materialia, 9. External link

Masoumipour, A. (2020). Design and Optimization of Air-Liquid Cooling System for Aerospace Applications [Master's thesis, Polytechnique Montréal]. Available

Masut, R. A., André, C., Vasilevskiy, D., & Turenne, S. (2020). Charge transport anisotropy in hot extruded bismuth telluride: Scattering by acoustic phonons. Journal of Applied Physics, 128(11), 10 pages. External link

Mehrabian, M., & Boukhili, R. (2020). Quantifying of secondary bending effect in multi-bolt single-lap carbon-epoxy composite joints via 3D-DIC. Composites Science and Technology, 200, 108453 (8 pages). External link

Memarianpour, M., Niknam, S. A., Turenne, S., & Balazinski, M. (2020). Initial Tool Wear Behavior in High-Speed Turning of Inconel 718. Transactions of the Canadian Society for Mechanical Engineering, 44(3), 395-404. External link

Miao, H., Mendez Romero, J. A., Forgues, S., & Lévesque, M. (2020). Experimental and numerical study of pneumatic needle peening effects on Aluminium Alloy 2024-T3. Journal of Materials Processing Technology, 275, 116370 (12 pages). External link

Mireles, L. K., Stanicki, D., Laurent, S., Deschenes, D., Sacher, E., & Yahia, L. (2020). Nitric oxide attachment to SPIONs: Demonstration of the covalent S[sbnd]NO bond in a nanodelivery system. Applied Surface Science, 521, 16 pages. External link

Mireles, L. K., Wu, M.-R., Saadeh, N., Yahia, L., & Sacher, E. (2020). Physicochemical Characterization of Polyvinyl Pyrrolidone: A Tale of Two Polyvinyl Pyrrolidones. ACS Omega, 5(47), 30461-30467. External link

Mirshekari, B., Zarei-Hanzaki, A., Barabi, A., Moshiri, A., Abedi, H. R., Lee, S. J., & Fujii, H. (2020). Optimizing the austenite stability in a ferritic lightweight steel through thermomechanical processing. Materials Characterization, 166, 15 pages. External link

Mohebbi, A. (2020). Human-Robot Interaction in Rehabilitation and Assistance: a Review. Current Robotics Reports, 1(3), 131-144. External link

Mohebbi, A., Achiche, S., & Baron, L. (2020). A fuzzy-based framework to support multicriteria design of mechatronic systems. Journal of Computational Design and Engineering, 7(6), 816-829. Available

Mohebbi, A., Amiri, P., & Kearney, R. E. (2020, July). Contributions of Vision in Human Postural Control: A Virtual Reality-based Study [Paper]. 42nd Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC 2020), Montréal, Québec. External link

Mosayebi, M., Zarei-Hanzaki, A., Abedi, H. R., Barabi, A., Jalali, M. S., Ghaderi, A., & Barnett, M. (2020). The correlation between the recrystallization texture and subsequent isothermal grain growth in a friction stir processed rare earth containing magnesium alloy. Materials Characterization, 163, 14 pages. External link

Mouazé, N., & Birglen, L. (2020). Deformation Modeling of Compliant Robotic Fingers Grasping Soft Objects. Journal of Mechanisms and Robotics, 13(1), 11 pages. External link

Mouazé, N., & Birglen, L. (2020). Preliminary Design of a Revolute to Prismatic Morphing Compliant Joint. Transactions of the Canadian Society for Mechanical Engineering, 44(4), 481-491. External link

Mouazé, N., Nguyen, T., & Birglen, L. (2020, May). Twisting string actuation with noncircular wrapping rods [Paper]. USCToMM Symposium on Mechanical Systems & Robotics (MSR 2020), Rapid City, SD, USA. External link

Muller, É. (2020). Une méthode d'éléments finis adaptative pour les écoulements instationnaires complexes [Ph.D. thesis, Polytechnique Montréal]. Available

Muller, E., Vautrin, Y., Pelletier, D., & Garon, A. (2020, January). A local adaptive remeshing procedure for unsteady incompressible viscous flows [Paper]. AIAA Scitech Forum, Orlando, FL, USA (22 pages). External link

Mustafy, T., Londono, I., Moldovan, F., & Villemure, I. (2020, August). Bone benefits from pubertal exercise are sustained after detraining in male rats [Poster]. World Congress on Osteoporosis, Osteoarthritis and Musculoskeletal Diseases (WCO-IOF-ESCEO 2020). Published in Osteoporosis International, 31(Suppl. 1). External link

Mustafy, T., Londono, I., Moldovan, F., & Villemure, I. (2020). Isolated Cyclic Loading During Adolescence Improves Tibial Bone Microstructure and Strength at Adulthood. JBMR Plus, 4(4), e10349-e10349. External link

Mustafy, T., Zimmermann, Y., & Villemure, I. (2020). Nondestructive Assessment of Growing Rat Tibial Mechanical Properties Under Three-Point Bending: A Microcomputed Tomography Based Finite Element Study. Journal of Biomechanical Engineering, 142(12), 121001 (44 pages). External link

N

Namvar, S. (2020). High Fidelity Numerical Simulation of 3D Arc Extinction in a High Voltage Circuit Breaker [Ph.D. thesis, Polytechnique Montréal]. Available

Neale, A., Kummert, M., & Bernier, M. (2020). Development of a stochastic virtual smart meter data set for a residential building stock - methodology and sample data. Journal of Building Performance Simulation, 13(5), 583-605. Available

Nguiadem, C., Raison, M., & Achiche, S. (2020). Motion planning of upper-limb exoskeleton robots : a review. Applied Sciences, 10(21), 21 pages. Available

Nguyen, T. T. (2020). Étude des performances aérodynamiques par simulations numériques d'un concept d'aéronef à décollage et atterrissage vertical (VTOL) destiné à la mobilité urbaine [Master's thesis, Polytechnique Montréal]. Available

Niknam, S. A., & Jalali, A. (2020). Effects of lubricants and flow rates on the surface roughness and chip thickness when MQL turning of aero-engine aluminum alloys 6061-T6 and 7076-T6. International Journal of Advanced Manufacturing Technology, 110, 2015-2022. External link

Ning, B., Laporte, C., Mustafy, T., & Villemure, I. (2020, August). High impact loading applied during puberty intensifies bone (re)modelling in growing rats [Poster]. Unspecified. External link

Nyssen, F., & Batailly, A. (2020). Sensitivity Analysis of Rotor/Stator Interactions Accounting for Wear and Thermal Effects within Low- and High-Pressure Compressor Stages. Coatings, 10(1), 23 pages. External link

Nyssen, F., Tableau, N., Lavazec, D., & Batailly, A. (2020). Experimental and numerical characterization of a ceramic matrix composite shroud segment under impact loading. Journal of Sound and Vibration, 467, 31 pages. External link

O

Orlando, V., Morin, G., Laffont, A., Lenart, D., Barrera, C. S., Mustafy, T., Sankhe, S., Villemure, I., & Mailhot, G. (2020). CFTR deletion affects mouse osteoblasts in a gender-specific manner. Journal of Cellular Physiology, 235(10), 6736-6753. External link

Oulmane, A., & Ross, A. (2020). Effects of material parameters on the transient dynamics of an impacted plate with partial constrained layer damping treatment. Journal of the Acoustical Society of America, 147(3), 1939-1952. External link

P

Parenteau, M., & Laurendeau, É. (2020). A general modal frequency-domain vortex lattice method for aeroelastic analyses. Journal of Fluids and Structures, 99, 13 pages. External link

Parenteau, M., Bourgault-Cote, S., Plante, F., & Laurendeau, É. (2020, May). Development of parallel CFD applications on distributed memory with chapel [Paper]. 34th IEEE International Parallel and Distributed Processing Symposium Workshops (IPDPSW 2020), New Orleans, LA, USA. External link

Piccirelli, N., Bazin, B., Therriault, D., Lafrance, T., & Trudeau Lalonde, F. (2020). Extruder head for additive manufacturing, system and process for additive manufacturing. [Tête d'extrusion pour fabrication additive, système et procédé de fabrication additive]. (Patent no. CA3041017). External link

Pierre, J., Farahani, R. D., & Therriault, D. (2020). Objective 3: Additive manufacturing of acoustic sandwich panels using the materials developed in O1. (Technical Report). Unavailable

Plante, F. (2020). Towards Understanding Stall Cells and Transonic Buffet Cells [Ph.D. thesis, Polytechnique Montréal]. Available

Plante, F., Dandois, J., & Laurendeau, É. (2019, January). Similarities Between Cellular Patterns Occurring in Transonic Buffet and Subsonic Stall [Abstract]. AIAA Science and Technology Forum and Exposition (AAIA SciTech) / AIAA Guidance, Navigation, and Control Conference, San Diego, CA. Published in AIAA Journal, 58(1). External link

Plante, F., Dandois, J., Beneddine, S., Laurendeau, É., & Sipp, D. (2020). Link between subsonic stall and transonic buffet on swept and unswept wings: from global stability analysis to nonlinear dynamics. Journal of Fluid Mechanics, 908, A16 (40 pages). External link

Popescu, G. M. (2020). Conception d'un quadrirotor à rotors inclinables pour le suivi de trajectoires agressives [Master's thesis, Polytechnique Montréal]. Available

Popescu, R. I. (2020). Design et développement d'un quadrirotor joueur de tennis de table avec des hélices inclinables [Master's thesis, Polytechnique Montréal]. Available

Prakash, A., & Laurendeau, É. (2020). Consistent surface roughness extension for wall functions. International Journal of Heat and Fluid Flow, 82, 11 pages. External link

R

Rafiee, M., Farahani, R. D., & Therriault, D. (2020). Multi-Material 3D and 4D Printing: A Survey. Advanced Science Letters, 7(12), 1902307 (26 pages). External link

Rafiee, M., Hosseini Rad, S., Nitzsche, F., Laliberte, J., & Labrosse, M. R. (2020). Significant fatigue life enhancement in multiscale doubly-modified fiber/epoxy nanocomposites with graphene nanoplatelets and reduced-graphene oxide. Polymers, 12(9), 2135 (10 pages). Available

Rastegar, S., Arnoux, P. J., Wang, X., & Aubin, C.-É. (2020). Biomechanical analysis of segmental lumbar lordosis and risk of cage subsidence with different cage heights and alternative placements in transforaminal lumbar interbody fusion. Computer Methods in Biomechanics and Biomedical Engineering, 23(9), 456-466. External link

Recchia, G. (2020). Conception et validation d'outils pour injection sur profil aérant [Master's thesis, Polytechnique Montréal]. Available

Rohart, V., Dubé, M., & Laberge Lebel, L. (2020). Effects of temperature on the apparent lap shear strength of resistance-welded carbon fibre/thermoplastic composite joints. SAMPE Journal, 55(3), 30-37. Unavailable

Rohart, V., Laberge Lebel, L., & Dube, M. (2020). Effects of environmental conditions on the lap shear strength of resistance-welded carbon fibre/thermoplastic composite joints. Composites Part B: Engineering, 198, 10 pages. External link

Rohart, V., Laberge Lebel, L., & Dube, M. (2020). Improved adhesion between stainless steel heating element and PPS polymer in resistance welding of thermoplastic composites. Composites Part B: Engineering, 188, 12 pages. External link

Rohart, V., Laberge Lebel, L., & Dube, M. (2020). Influence of freeze/thaw cycling on the mechanical performance of resistance-welded carbon fibre/polyphenylene sulphide composite joints. Journal of Reinforced Plastics and Composites, 39(21-22), 837-851. External link

Ruspi, M. L., Palanca, M., Cristofolini, L., Liebsch, C., Villa, T., Brayda-Bruno, M., Galbusera, F., Wilke, H.-J., & La Barbera, L. (2020). Digital Image Correlation (DIC) Assessment of the Non-Linear Response of the Anterior Longitudinal Ligament of the Spine during Flexion and Extension. Materials, 13(2), 14 pages. External link

S

Saberi, M., Niknam, S. A., & Hashemi, R. (2020). On the impacts of cutting parameters on surface roughness, tool wear mode and size in slot milling of A356 metal matrix composites reinforced with silicon carbide elements. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 235(10), 1655-1667. External link

Safavi, M., Balazinski, M., Mehmanparast, H., & Niknam, S. A. (2020). Experimental characterization of tool wear morphology and cutting force profile in dry and wet turning of titanium metal matrix composites (Ti-MMCs). Metals, 10(11), 14 pages. Available

Samadi, B., Raison, M., Achiche, S., & Fortin, C. (2020). Identification of the most relevant intervertebral effort indicators during gait of adolescents with idiopathic scoliosis. Computer Methods in Biomechanics and Biomedical Engineering, 23(10), 664-674. External link

Savard, B., Wehrfritz, A., Lam, K., Margerte, Q., Ferney, L., & Farjam, S. (2020). Decreased mixture reactivity and hot flame speed in the products of diffusion-affected autoignitive cool flames in the NTC regime. Combustion and Flame, 222, 434-445. External link

Scolan, Y.-M., & Étienne, S. (2020, November). Analyse du champs de pression dans les écoulements à surface libre fortement accélérés [Analysis of the pressure field in highly accelerated free surface flows]. [Paper]. 17e journées de l'hydrodynamique (JH 2020), Cherbroug-on-Cotentin (11 pages). Unavailable

Seifollahi Moghadam, Z. (2020). Evaluation of Mesh Characteristics for Scale-Resolving Simulation of Incompressible Flows [Master's thesis, Polytechnique Montréal]. Available

Sentissi, M. L. (2020). Développement d'une méthodologie d'essais de fatigue vibratoire HCF pour les métaux [Master's thesis, Polytechnique Montréal]. Available

Sepahi-Boroujeni, A., Hosseini-Hashemi, S., & Sepahi-Boroujeni, S. (2020). Effects of surface tension of graphene sheet on impact and rebound behavior of colliding nanoparticle. Superlattices and Microstructures, 140, 106464 (11 pages). External link

Sepahi-Boroujeni, S., Mayer, J. R. R., & Khameneifar, F. (2020). Repeatability of on-machine probing by a five-axis machine tool. International Journal of Machine Tools and Manufacture, 152, 19 pages. External link

Serra, M., Crouzat, S., Simon, G., Vétel, J., & Haller, G. (2020). Material spike formation in highly unsteady separated flows. Journal of Fluid Mechanics, 883, 27 pages. External link

Shan, X., & Birglen, L. (2020). Modeling and analysis of soft robotic fingers using the fin ray effect. International Journal of Robotics Research, 39(14), 1686-1705. External link

Sharifzadeh-Kermani, A., Arjmand, N., Vossoughi, G., Shirazi-Adl, A., Patwardhan, A. G., Parnianpour, M., & Khalaf, K. (2020). Estimation of Trunk Muscle Forces Using a Bio-Inspired Control Strategy Implemented in a Neuro-Osteo-Ligamentous Finite Element Model of the Lumbar Spine. Frontiers in Bioengineering and Biotechnology, 8, 12 pages. External link

Shirazi-Adl, A., Schmidt, H., & Kingma, I. (2019, July). 3rd International workshop on spinal loading and deformation [Paper]. 3r International Workshop on Spinal Loading and Deformation, Berlin, Germany (4 pages). Published in Journal of Biomechanics, 102. External link

Siguerdidjane, W., Khameneifar, F., & Gosselin, F. (2020). Efficient planning of peen-forming patterns via artificial neural networks. Manufacturing Letters, 25, 70-74. External link

Singh, J., Kim, M.-S., Kaushik, L., Kang, J.-H., Kim, D., Martin, É., & Choi, S.-H. (2020). Twinning-detwinning behavior of E-form Mg alloy sheets during in-plane reverse loading. International Journal of Plasticity, 127, 102637. External link

Sosa Rey, F., Lingua, A., Lampron, O., Lévesque, M., & Therriault, D. (2020). Objective 2: Predict mechanical response of AM composites. (Technical Report). Unavailable

Strugala, G. (2020). Experimental Testing and Modelling of Variable Capacity Air-to-Air Heat Pumps [Master's thesis, Polytechnique Montréal]. Available

Sun, Y., Causse, P., Benmokrane, B., & Trochu, F. (2020). Permeability Measurement of Granular Porous Materials by a Modified Falling-Head Method. Journal of Engineering Mechanics, 146(9), 11 pages. External link

T

Taha, H., Yacout, S., & Birglen, L. (2020, November). Robotic arms anomalies and degradation monitoring and detection by using machine learning [Paper]. Stuttgart Conference on the Automotive Production (SCAP 2020). External link

Tari, M. (2020). Flutter Instability of a Reconfiguring Beam with Large Displacement [Master's thesis, Polytechnique Montréal]. Available

Testoni, O., Bergamini, A., Bodkhe, S., & Ermanni, P. (2020). A novel concept for adaptive friction damper based on electrostatic adhesion. Smart Materials and Structures, 29(10), 10 pages. External link

Testoni, O., Bodkhe, S., Ermanni, P., & Bergamini, A. (2020, September). Mechanical Characterization of a Novel Concept of Adaptive Electrostatic Friction Damper [Paper]. Conference on Smart Materials, Adaptive Structures and Intelligent Systems (ASME 2020) (7 pages). External link

Therriault, D., Iervolino, F., Pierre, J., Piccirelli, N., Ross, A., & Costa Baptista, J. (2020). Acoustic panel and associated manufacturing method. [Panneau acoustique et procédé de fabrication associé]. (Patent Application no. CA3084631). External link

Toche, B., Pellerin, R., & Fortin, C. (2020). Set-based design: a review and new directions. Design Science, 6, 41 pages. Available

Trofimov, A., Markov, A., & Sevostianov, I. (2020). Replacement relations for elastic composite materials having different matrices and related problems. Acta Mechanica, 231(6), 2335-2350. External link

Trudeau, P., Laberge Lebel, L., Hoste, D., & Landry, A. (2020). Composite rivet blank and installation thereof. (Patent Application no. US20200171758). External link

Tucny, J.-M., Vidal, D., Leclaire, S., & Bertrand, F. (2020). Comparison of existing and extended boundary conditions for the simulation of rarefied gas flows using the Lattice Boltzmann method. International Journal of Modern Physics C, 31(5), 2050070. External link

V

Vautrin, Y. (2020). Modélisation et simulation numérique d'écoulements diphasiques de fluides séparés par une interface avec une méthode d'éléments finis adaptatives en espace et en temps [Ph.D. thesis, Polytechnique Montréal]. Available

Vautrin, Y., Muller, E., Pelletier, D., Étienne, S., & Béguin, C. (2020, January). Automatic adaptive remeshing for unsteady interfacial flows with surface tension [Paper]. AIAA Scitech Forum, Orlando, FL, USA. External link

W

Wang, X., Yeung, K., Cheung, J. P. Y., Lau, J. Y., Qi, W., Cheung, K. M., & Aubin, C.-É. (2020). A novel scoliosis instrumentation using special superelastic nickel-titanium shape memory rods: a biomechanical analysis using a calibrated computer model and data from a clinical trial. Spine Deformity, 8(3), 369-379. External link

Wu, Y., Schmitt, T., Bousser, É., Khelfaoui, F., Najarian, V., Sapieha, J.-E., & Brochu, M. (2020). Effects of interfacial microstructure on mechanical properties of Stellite-hardfaced coating during long-term aging. Surface and Coatings Technology, 398, 11 pages. External link

Wu, Y., Schmitt, T., Bousser, É., Vernhes, L., Khelfaoui, F., Perez, G., Sapieha, J.-E., & Brochu, M. (2020). Microstructural and mechanical characterization of Stellite-hardfaced coatings with two types of buffer layers. Surface and Coatings Technology, 390, 11 pages. External link

X

Xing, K., Liu, X., Liu, Z., Mayer, J. R. R., & Achiche, S. (2020, October). Low-Cost Precision Monitoring System of Machine Tools for SMEs [Paper]. 8th CIRP Global Web Conference on Flexible Mass Customisation (CIRPe 2020). Published in Procedia CIRP, 96. External link

Xing, K., Mayer, J. R. R., & Achiche, S. (2020). Impact of Model Complexity in the Monitoring of Machine Tools Condition Using Volumetric Errors. International Journal of Automation Technology, 14(3), 369-379. External link

Xing, K., Rimpault, X., Mayer, J. R. R., Chatelain, J.-F., & Achiche, S. (2019, October). Quantitative assessment of machine tools condition through fractal analysis of volumetric error vector similarity measures [Paper]. 7th CIRP Global Web Conference (CIRPe 2019), Berlin, Germany. Published in Procedia CIRP, 86. External link

Z

Zoghlami, S. (2020). Modélisation numérique des écoulements diphasiques dispersés [Ph.D. thesis, Polytechnique Montréal]. Available

Zou, S. (2020). Bioinspired Tough Materials with Microstructured Sacrificial Bonds Based on Instability-Assisted 3D Printing [Ph.D. thesis, Polytechnique Montréal]. Available

Zou, S., Therriault, D., & Gosselin, F. (2020). Spiderweb-inspired, transparent, impact-absorbing composite. Cell Reports Physical Science, 1(11), 100240 (17 pages). Available

List generated on: Thu Sep 21 08:20:23 2023 EDT