![]() | Monter d'un niveau |
Ajaja, J., Jomaa, W., Bocher, P., Chromik, R. R., & Brochu, M. (2020). High cycle fatigue behavior of hard turned 300 M ultra-high strength steel. International Journal of Fatigue, 131, 12 pages. Lien externe
Alloui, Z., Ouzani, R., & Vasseur, P. (2020). Thermocapillary-buoyancy convection of a power-law fluid layer heated from below. Journal of Non-Newtonian Fluid Mechanics, 282, 13 pages. Lien externe
Anahid, M. J., Heydarnia, H., Niknam, S. A., & Mehmanparast, H. (2020). Evaluating the sensitivity of acoustic emission signal features to the variation of cutting parameters in milling aluminum alloys: Part A: frequency domain analysis. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 235(10), 1558-1568. Lien externe
Aujogue, N., Ross, A., & Attendu, J.-M. (2020). Time-space domain nearfield acoustical holography for visualizing normal velocity of sources. Mechanical Systems and Signal Processing, 139, 106363 (13 pages). Lien externe
Bag, A., Delbergue, D., Ajaja, J., Bocher, P., Lévesque, M., & Brochu, M. (2020). Effect of different shot peening conditions on the fatigue life of 300M steel submitted to high stress amplitudes. International Journal of Fatigue, 130, 12 pages. Lien externe
Bakhtiari, M., Lakis, A. A., & Kerboua, Y. (2020). Nonlinear supersonic flutter of truncated conical shells. Journal of Mechanical Science and Technology, 34(4), 1375-1388. Lien externe
Bakhtiari, M., Lakis, A. A., & Kerboua, Y. (2020). Nonlinear Vibration of Truncated Conical Shells: Donnell, Sanders and Nemeth Theories. International Journal of Nonlinear Sciences and Numerical Simulation, 21(1), 83-97. Lien externe
Barron, O., Raison, M., Gaudet, G., & Achiche, S. (2020). Recurrent Neural Network for electromyographic gesture recognition in transhumeral amputees. Applied Soft Computing Journal, 96, 9 pages. Lien externe
Beauséjour, M., Vaillancourt, F., Akoume, M.-Y., Franco, A., Parent, S., Labelle, H., Joncas, J., Desbiens-Blais, F., Mac-Thiong, J.-M., Roy-Beaudry, M., Aubin, C.-É., & Moreau, A. (2020). Patient outcomes in idiopathic scoliosis are associated with biological endophenotypes: 2020 SOSORT award winner. European Spine Journal, 30(5), 1125-1131. Lien externe
Bellemare, J., Laliberté-Riverin, S., Ménard, D., Brochu, M., & Sirois, F. (2020). Coating density as the key factor behind hydrogen embrittlement of cadmium-plated 4340 steel. Journal of Applied Electrochemistry, 50(10), 1045-1058. Lien externe
Bellemare, J., Laliberte-Riverin, S., Ménard, D., Brochu, M., & Sirois, F. (2020). Subtleties Behind Hydrogen Embrittlement of Cadmium-Plated 4340 Steel Revealed by Thermal Desorption Spectroscopy and Sustained-Load Tests. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 51(6), 3054-3065. Lien externe
Belot, I., Vidal, D., Votsmeier, M., Hayes, R. E., & Bertrand, F. (2020). Numerical investigation of the impact of washcoat distribution on the filtration performance of gasoline particulate filters. Chemical Engineering Science, 221, 115656. Disponible
Benoit, D., Wang, X., Crandall, D. G., & Aubin, C.-É. (2020). Biomechanical analysis of sagittal correction parameters for surgical instrumentation with pedicle subtraction osteotomy in adult spinal deformity. Clinical Biomechanics, 71, 45-52. Lien externe
Bodkhe, S., & Ermanni, P. (2020). 3D printing of multifunctional materials for sensing and actuation: Merging piezoelectricity with shape memory. European Polymer Journal, 132, 8 pages. Lien externe
Bodkhe, S., Vigo, L., Zhu, S., Testoni, O., Aegerter, N., & Ermanni, P. (2020). 3D printing to integrate actuators into composites. Additive Manufacturing, 35, 8 pages. Lien externe
Boudina, M., Gosselin, F., & Étienne, S. (2020). Direct interception or inertial impaction? A theoretical derivation of the efficiency power law for a simple and practical definition of capture modes. Physics of Fluids, 32(12), 123603 (9 pages). Lien externe
Boulvert, J., Costa-Baptista, J., Cavalieri, T., Perna, M., Fotsing, E.-R., Romero-García, V., Gabard, G., Ross, A., Mardjono, J., & Groby, J.-P. (2020). Acoustic modeling of micro-lattices obtained by additive manufacturing. Applied Acoustics, 164, 9 pages. Lien externe
Boulvert, J., Costa-Baptista, J., Cavalieri, T., Romero-Garcia, V., Gabard, G., Fotsing, E.-R., Ross, A., Perna, M., Mardjono, J., & Groby, J.-P. (2020). Folded metaporous material for sub-wavelength and broadband perfect sound absorption. Applied Physics Letters, 117(25), 6 pages. Lien externe
Bourdin, T., Bédard, É., Benoit, M.-È., Prévost, M., Robert, É., Quach, C., Deziel, E., & Constant, P. (2020). Development of a New High-Throughput Multilocus Sequence Typing Method to Monitor Causative Agents of Nosocomial Infections. Infection Control and Hospital Epidemiology, 41(S1), S187-S187. Lien externe
Bouscarrat, D., Lévesque, M., & Vieille, B. (2020). Influence of time-dependent phenomena on translaminar fracture of woven-ply C/PPS laminates above the glass transition temperature. Composites Part B: Engineering, 180, 11 pages. Lien externe
Bretin, R., Lévesque, M., Pilvin, P., & Bocher, P. (2020). Neighborhood effect within polycrystalline materials: Elastoplastic micromechanical analysis by cellular automaton and finite element. International Journal of Fatigue, 137, 16 pages. Lien externe
Breumier, S., Sao-Joao, S., Villani, A., Lévesque, M., & Kermouche, G. (2020). High strain rate micro-compression for crystal plasticity constitutive law parameters identification. Materials and Design, 193, 17 pages. Lien externe
Brideau, S. A., Beausoleil-Morrison, I., & Kummert, M. (2020). Effects of controls and floor construction of radiant floor heating systems for residential application with high variability of solar gains. Science and Technology for the Built Environment, 26(4), 524-540. Lien externe
Cavalieri, T., Boulvert, J., Gabard, G., Romero-Garcia, V., Escouflaire, M., Regnard, J., & Groby, J.-P. (2020). Graded and anisotropic porous materials for broadband and angular maximal acoustic absorption. Materials, 13(20), 19 pages. Disponible
Cobetto, N., Aubin, C.-É., & Parent, S. (2020). Anterior Vertebral Body Growth Modulation: Assessment of the 2-year Predictive Capability of a Patient-specific Finite-element Planning Tool and of the Growth Modulation Biomechanics. Spine, 45(18), E1203-E1209. Lien externe
Couture-Peck, D., Garon, A., & Delfour, M. C. (2020). A new k-TMI/ALE fluid-structure formulation to study the low mass ratio dynamics of an elliptical cylinder. Journal of Computational Physics, 422, 32 pages. Lien externe
Cupeiro Figueroa, I., Cimmino, M., & Helsen, L. (2020). A methodology for long-term model predictive control of hybrid geothermal systems: the shadow-cost formulation. Energies, 13(23), 27 pages. Disponible
Darwish, A., Di Labbio, G., Saleh, W., & Kadem, L. (2020). In vitro characterization of Lagrangian fluid transport downstream of a dysfunctional bileaflet mechanical aortic valve. AIP Advances, 10(9), 095319 (15 pages). Disponible
de Lima, L. A. P., Achiche, S., de Lucas, R. D., & Raison, M. (2020). Second-order simultaneous components model for the overshoot and “slow component” in V̇O₂ kinetics. Respiratory Physiology & Neurobiology, 280, 10 pages. Lien externe
de Lima, L. A. P., de Lucas, R. D., Raison, M., & Achiche, S. (2020). Is the understanding of VO₂ kinetics biased by the first-order multi-exponential model? Pflügers Archiv-European Journal of Physiology, 472(12), 1661-1663. Lien externe
Delcroix, B., Le Ny, J., Bernier, M., Azam, M., Qu, B., & Venne, J.-S. (2020). Autoregressive neural networks with exogenous variables for indoor temperature prediction in buildings. Building Simulation, 14(1), 165-178. Disponible
Delorme, R., Diehl, P., Tabiai, I., Laberge Lebel, L., & Lévesque, M. (2020). Extracting constitutive mechanical parameters in linear elasticity using the virtual fields method within the ordinary state-based peridynamic framework. Journal of Peridynamics and Nonlocal Modeling, 2(2), 111-135. Lien externe
Di Fratta, C., Sun, Y., Causse, P., & Trochu, F. (2020). A dimensionless characteristic number for process selection and mold design in composites manufacturing : part I — theory. Journal of Composites Science, 4(1), 11 (16 pages). Disponible
Di Fratta, C., Sun, Y., Causse, P., & Trochu, F. (2020). A Dimensionless Characteristic Number for Process Selection and Mold Design in Composites Manufacturing: Part II-Applications. Journal of Composites Science, 4(1), 10 (17 pages). Lien externe
Di Labbio, G., Ait Abderrahmane, H., Fayed, M., & Ng, H. D. (2020). Transitions between systems of satellite vortices in a rotating fluid. Physics of Fluids, 32(10), 101701 (6 pages). Disponible
Diehl, P., Jha, P. K., Kaiser, H., Lipton, R., & Lévesque, M. (2020). An asynchronous and task-based implementation of peridynamics utilizing HPXthe C++ standard library for parallelism and concurrency. SN Applied Sciences, 2(12), 21 pages. Lien externe
Dube-Cyr, R., Aubin, C.-É., Villemure, I., Bianco, R.-J., Godio-Raboutet, Y., & Arnoux, P.-J. (2020). Biomechanical analysis of two insertion sites for the fixation of the sacroiliac joint via an oblique lateral approach. Clinical Biomechanics, 74, 118-123. Lien externe
Eça, L., Vaz, G., Hoekstra, M., Pal, S., Muller, E., Pelletier, D., Bertinetti, A., Difonzo, R., Savoldi, L., Zanino, R., Zappatore, A., Chen, Y., Maki, K. J., Ye, H., Drofelnik, J., Moss, B., & Da Ronch, A. (2020). Overview of the 2018 workshop on iterative errors in unsteady flow simulations. Journal of Verification, Validation and Uncertainty Quantification, 5(2), 13 pages. Lien externe
Eftekhari, N., Muhammad, W., Haftlang, F., Zarei-Hanzaki, A., & Martin, É. (2020). Microstructural evolution and corrosion behavior of Sanicro 28 during thermomechanical processing. Materials Today Communications, 24, 10 pages. Lien externe
Escaich, C., Shi, Z., Baron, L., & Balazinski, M. (2020). Machining of titanium metal matrix composites : progress overview. Materials, 13(21), 5011 (18 pages). Disponible
Eslami Nejad, P., Cimmino, M., Nguyen, A., Badache, M., & Bastani, A. (2020). Performance comparison of a vertical direct expansion geothermal evaporator: PART II, multiple U-pipes. International Journal of Refrigeration, 116, 161-171. Lien externe
Eslami Nejad, P., Nguyen, A., Cimmino, M., Bastani, A., & Badache, M. (2020). Performance comparison of a vertical direct expansion geothermal evaporator: Part I, single U-pipe using different refrigerants. [Comparaison des performances d'un évaporateur géothermique vertical à détente directe: Partie I, Tuyauterie en U unique avec différents frigorigènes]. Lien externe
Esmaeili, S. M., & Mayer, J. R. R. (2020). Generation of a 3D error compensation grid from ISO 230-1 error parameters obtained by a SAMBA indirect calibration and validated by a ball-bar spherical test. International Journal of Advanced Manufacturing Technology, 106(11-12), 4649-4662. Lien externe
Esmaeili, S., & Mayer, J. R. R. (2020). An integrated geometric and hysteretic error model of a three axis machine tool and its identification with a 3D telescoping ball-bar. Journal of Manufacturing and Materials Processing, 4(1), 14 pages. Disponible
Falsafioon, M., Arabi, S., Camarero, R., & Guibault, F. (2020). Moving meshes in complex configurations using the composite sliding grid method. Computers & Fluids, 206, 104256 (16 pages). Lien externe
Fortier, V., Brunel, J.- E., & Laberge Lebel, L. (2020). Fastening composite structures using braided thermoplastic composite rivets. Journal of Composite Materials, 54(6), 801-812. Lien externe
Fortin, S., Étienne, S., Béguin, C., Pelletier, D., & Brosset, L. (2020). Numerical study of the influence of weber and reynolds numbers on the development of kelvinhelmholtz instability. International Journal of Offshore and Polar Engineering, 30(2), 129-140. Lien externe
Fradet, L., Bianco, R.-J., Tatsumi, R., Coleman, J., & Aubin, C.-É. (2020). Biomechanical comparison of sacral and transarticular sacroiliac screw fixation. Spine Deformity, 8(5), 853-862. Lien externe
François, T., Tabone, L., Levy, A., Seguin, L. A., Touré, T., Aubin, C.-É., Jouvet, P., & Luchette, F. A. (2020). Simulation-based rapid development and implementation of a novel barrier enclosure for use in COVID-19 patients : the splashGuard CG. Critical Care Research and Practice, 2020, 1-8. Disponible
Garon, A., & Delfour, M. C. (2020). Mesh adaptation based on transfinite mean value interpolation. Journal of Computational Physics, 407, 109248 (31 pages). Lien externe
Ghezelbash, F., Eskandari, A. H., Shirazi-Adl, A., Kazempour, M., Tavakoli, J., Baghani, M., & Costi, J. J. (2020). Modeling of Human Intervertebral Disc Annulus Fibrosus with Complex Multi-Fiber Networks. SSRN Electronic Journal, 41 pages. Lien externe
Ghezelbash, F., Shirazi-Adl, A., Plamondon, A., & Arjmand, N. (2020). Comparison of different lifting analysis tools in estimating lower spinal loads Evaluation of NIOSH criterion. Journal of Biomechanics, 112, 110024 (6 pages). Lien externe
Guo, Z., Ma, Y., & Rigaud, M. (2020). Sinterability of macrocrystalline and cryptocrystalline magnesite to refractory magnesia. International Journal of Ceramic Engineering & Science, 2(6), 303-309. Disponible
Hébert, A. (2020). A general presentation of the SPH equivalence technique in non-fundamental mode cases. Annals of Nuclear Energy, 141, 10 pages. Lien externe
Hodonou, C., Kerbrat, O., Balazinski, M., & Brochu, M. (2020). Process selection charts based on economy and environment: subtractive or additive manufacturing to produce structural components of aircraft. International Journal on Interactive Design and Manufacturing (IJIDeM), 14(3), 861-873. Lien externe
Huang, W., Causse, P., Hu, H., & Trochu, F. (2020). Numerical and experimental investigation of saturated transverse permeability of 2D woven glass fabrics based on material twins. Polymer Composites, 41(4), 1341-1355. Lien externe
Huang, W., Causse, P., Hu, H., Belouettar, S., & Trochu, F. (2020). Transverse compaction of 2D glass woven fabrics based on material twins Part I: Geometric analysis. Composite Structures, 237, 10 pages. Lien externe
Huang, W., Causse, P., Hu, H., Belouettar, S., & Trochu, F. (2020). Transverse compaction of 2D glass woven fabrics based on material twins Part II: Tow and fabric deformations. Composite Structures, 237, 8 pages. Lien externe
Idei, M., Nomura, T., Jouvet, P., Aubin, C.-É., Kawaguchi, A., & Nakagawa, M. (2020). Video Laryngoscope Intubation With an Aerosol Barrier Device: A Randomized Sequential Crossover Pilot Study. Critical care explorations, 2(10), e0234 (4 pages). Disponible
Jadayel, M., & Khameneifar, F. (2020). Improving geometric accuracy of 3D printed parts using 3D metrology feedback and mesh morphing. Journal of Manufacturing and Materials Processing, 4(4), 112 (15 pages). Disponible
Jamshidi, M., Rimpault, X., Balazinski, M., & Chatelain, J.-F. (2020). Fractal analysis implementation for tool wear monitoring based on cutting force signals during CFRP/titanium stack machining. International Journal of Advanced Manufacturing Technology, 106(9-10), 3859-3868. Lien externe
Kang, H. S., & Mureithi, N. W. (2020). Annular-flow-induced vibrations of a simply-supported tube in a finite-length narrow-gap support. Nuclear Engineering and Design, 364, 110680 (12 pages). Lien externe
Kathirgamanathan, A., Pean, T., Zhang, K., De Rosa, M., Salom, J., Kummert, M., & Finn, D. P. (2020). Towards standardising market-independent indicators for quantifying energy flexibility in buildings. Energy and Buildings, 220, 16 pages. Lien externe
Khoddam-Khorasani, P., Arjmand, N., & Shirazi-Adl, A. (2020). Effect of changes in the lumbar posture in lifting on trunk muscle and spinal loads: A combined in vivo, musculoskeletal, and finite element model study. Journal of Biomechanics, 104, 169-178. Lien externe
Laferrière, A., Cimmino, M., Picard, D., & Helsen, L. (2020). Development and validation of a full-time-scale semi-analytical model for the short- and long-term simulation of vertical geothermal bore fields. Geothermics, 86. Disponible
Lalande, V., Villemure, I., Parent, S., & Aubin, C.-É. (2020). Induced pressures on the epiphyseal growth plate with non segmental anterior spine tethering. Spine Deform, 8(4), 585-589. Lien externe
Lalande, V., Villemure, I., Vonthron, M., Parent, S., & Aubin, C.-É. (2020). Cyclically controlled vertebral body tethering for scoliosis: an in vivo verification in a pig model of the pressure exerted on vertebral end plates. Spine Deform, 8(1), 39-44. Lien externe
Laliberte-Riverin, S., Bellemare, J., Sirois, F., & Brochu, M. (2020). Determination of hydrogen embrittlement stress intensity threshold by fractography. Materialia, 12, 12 pages. Lien externe
Laliberte-Riverin, S., Bellemare, J., Sirois, F., & Brochu, M. (2020). Internal hydrogen embrittlement of pre-cracked, cadmium-plated AISI 4340 high strength steel with sustained load tests and incremental step-loading tests. Engineering Fracture Mechanics, 223, 106773 (13 pages). Lien externe
Larson, A. N., Floccari, L. V., Garg, S., Erickson, M. A., Sponseller, P. D., Brito, J. P., Aubin, C.-É., & Polly, D. W. J. (2020). Willingness to enroll in a surgical randomized controlled trial: patient and parent preferences regarding implant density for adolescent idiopathic scoliosis fusion. Spine Deformity, 8(5), 957-963. Lien externe
Leclaire, S., Vidal, D., Fradette, L., & Bertrand, F. (2020). Validation of the pressure drop-flow rate relationship predicted by lattice Boltzmann simulations for immiscible liquid-liquid flows through SMX static mixers. Chemical Engineering Research and Design, 153, 350-368. Lien externe
Lecoublet, B., Boisclair, D., Evin, M., Wagnac, E., Petit, Y., Aubin, C.-É., & Arnoux, P.-J. (2020). Assessing the Global Range of Motion of the Helmeted Head Through Rotational and Translational Measurements. International Journal of Crashworthiness, 25(3), 321-327. Lien externe
Letellier-Duchesne, S., & Leroy, L. (2020). Archetypal : a Python package for collection, simulating, converting and analyzing building archetypes. Journal of Open Source Software, 5(50), 3 pages. Lien externe
Letendre, F., Mehrabian, S., Étienne, S., & Cameron, C. B. (2020). The interactions of oil droplets with filter feeders: A fluid mechanics approach. Marine Environmental Research, 161, 11 pages. Lien externe
Li, H., Poree, J., Chayer, B., Cardinal, M.-H. R., & Cloutier, G. (2020). Parameterized Strain Estimation for Vascular Ultrasound Elastography With Sparse Representation. IEEE Transactions on Medical Imaging, 39(12), 3788-3800. Lien externe
Louyot, M., Nennemann, B., Monette, C., & Gosselin, F. (2020). Modal analysis of a spinning disk in a dense fluid as a model for high head hydraulic turbines. Journal of Fluids and Structures, 94, 20 pages. Lien externe
Madra, A., Van-Pham, D.-T., Nguyen, M.-T., Nguyen, C.-N., Breitkopf, P., & Trochu, F. (2020). Automated identification of defect morphology and spatial distribution in woven composites. Journal of Composites Science, 4(4), 178 (17 pages). Disponible
Malandra, F., Kizilkale, A. C., Sirois, F., Sanso, B., Anjos, M. F., Bernier, M., Gendreau, M., & Malhamé, R. P. (2020). Smart Distributed Energy Storage Controller (smartDESC). Energy, 210, 10 pages. Lien externe
Marchionatti, E., Desrochers, A., Wenzlow, N., Villemure, I., & Theoret, C. L. (2020). In vitro biomechanical properties of sole tissues: Comparison between healthy and ulcerated bovine claws. Journal of Dairy Science, 103(7), 6412-6421. Lien externe
Markov, A., Trofimov, A., & Sevostianov, I. (2020). Effect of non-planar cracks with islands of contact on the elastic properties of materials. International Journal of Solids and Structures, 191, 307-314. Lien externe
Markov, A., Trofimov, A., & Sevostianov, I. (2020). A unified methodology for calculation of compliance and stiffness contribution tensors of inhomogeneities of arbitrary 2D and 3D shapes embedded in isotropic matrix open access software. International Journal of Engineering Science, 157, 15 pages. Lien externe
Martin, É., Muhammad, W., Detor, A. J., Spinelli, I., Wessman, A., & Wei, D. (2020). “Strain-annealed” grain boundary engineering process investigated in Hastelloy-X. Materialia, 9. Lien externe
Masut, R. A., André, C., Vasilevskiy, D., & Turenne, S. (2020). Charge transport anisotropy in hot extruded bismuth telluride: Scattering by acoustic phonons. Journal of Applied Physics, 128(11), 10 pages. Lien externe
Mehrabian, M., & Boukhili, R. (2020). Quantifying of secondary bending effect in multi-bolt single-lap carbon-epoxy composite joints via 3D-DIC. Composites Science and Technology, 200, 108453 (8 pages). Lien externe
Memarianpour, M., Niknam, S. A., Turenne, S., & Balazinski, M. (2020). Initial Tool Wear Behavior in High-Speed Turning of Inconel 718. Transactions of the Canadian Society for Mechanical Engineering, 44(3), 395-404. Lien externe
Miao, H., Mendez Romero, J. A., Forgues, S., & Lévesque, M. (2020). Experimental and numerical study of pneumatic needle peening effects on Aluminium Alloy 2024-T3. Journal of Materials Processing Technology, 275, 116370 (12 pages). Lien externe
Mireles, L. K., Stanicki, D., Laurent, S., Deschenes, D., Sacher, E., & Yahia, L. (2020). Nitric oxide attachment to SPIONs: Demonstration of the covalent S[sbnd]NO bond in a nanodelivery system. Applied Surface Science, 521, 16 pages. Lien externe
Mireles, L. K., Wu, M.-R., Saadeh, N., Yahia, L., & Sacher, E. (2020). Physicochemical Characterization of Polyvinyl Pyrrolidone: A Tale of Two Polyvinyl Pyrrolidones. ACS Omega, 5(47), 30461-30467. Lien externe
Mirshekari, B., Zarei-Hanzaki, A., Barabi, A., Moshiri, A., Abedi, H. R., Lee, S. J., & Fujii, H. (2020). Optimizing the austenite stability in a ferritic lightweight steel through thermomechanical processing. Materials Characterization, 166, 15 pages. Lien externe
Mohebbi, A. (2020). Human-Robot Interaction in Rehabilitation and Assistance: a Review. Current Robotics Reports, 1(3), 131-144. Lien externe
Mohebbi, A., Achiche, S., & Baron, L. (2020). A fuzzy-based framework to support multicriteria design of mechatronic systems. Journal of Computational Design and Engineering, 7(6), 816-829. Disponible
Mosayebi, M., Zarei-Hanzaki, A., Abedi, H. R., Barabi, A., Jalali, M. S., Ghaderi, A., & Barnett, M. (2020). The correlation between the recrystallization texture and subsequent isothermal grain growth in a friction stir processed rare earth containing magnesium alloy. Materials Characterization, 163, 14 pages. Lien externe
Mouazé, N., & Birglen, L. (2020). Deformation Modeling of Compliant Robotic Fingers Grasping Soft Objects. Journal of Mechanisms and Robotics, 13(1), 11 pages. Lien externe
Mouazé, N., & Birglen, L. (2020). Preliminary Design of a Revolute to Prismatic Morphing Compliant Joint. Transactions of the Canadian Society for Mechanical Engineering, 44(4), 481-491. Lien externe
Mustafy, T., Londono, I., Moldovan, F., & Villemure, I. (2020). Isolated Cyclic Loading During Adolescence Improves Tibial Bone Microstructure and Strength at Adulthood. JBMR Plus, 4(4), e10349-e10349. Lien externe
Mustafy, T., Zimmermann, Y., & Villemure, I. (2020). Nondestructive Assessment of Growing Rat Tibial Mechanical Properties Under Three-Point Bending: A Microcomputed Tomography Based Finite Element Study. Journal of Biomechanical Engineering, 142(12), 121001 (44 pages). Lien externe
Neale, A., Kummert, M., & Bernier, M. (2020). Development of a stochastic virtual smart meter data set for a residential building stock - methodology and sample data. Journal of Building Performance Simulation, 13(5), 583-605. Disponible
Nguiadem, C., Raison, M., & Achiche, S. (2020). Motion planning of upper-limb exoskeleton robots : a review. Applied Sciences, 10(21), 21 pages. Disponible
Niknam, S. A., & Jalali, A. (2020). Effects of lubricants and flow rates on the surface roughness and chip thickness when MQL turning of aero-engine aluminum alloys 6061-T6 and 7076-T6. International Journal of Advanced Manufacturing Technology, 110(7-8), 2015-2022. Lien externe
Nyssen, F., & Batailly, A. (2020). Sensitivity Analysis of Rotor/Stator Interactions Accounting for Wear and Thermal Effects within Low- and High-Pressure Compressor Stages. Coatings, 10(1), 23 pages. Lien externe
Nyssen, F., Tableau, N., Lavazec, D., & Batailly, A. (2020). Experimental and numerical characterization of a ceramic matrix composite shroud segment under impact loading. Journal of Sound and Vibration, 467, 31 pages. Lien externe
Orlando, V., Morin, G., Laffont, A., Lenart, D., Barrera, C. S., Mustafy, T., Sankhe, S., Villemure, I., & Mailhot, G. (2020). CFTR deletion affects mouse osteoblasts in a gender-specific manner. Journal of Cellular Physiology, 235(10), 6736-6753. Lien externe
Oulmane, A., & Ross, A. (2020). Effects of material parameters on the transient dynamics of an impacted plate with partial constrained layer damping treatment. Journal of the Acoustical Society of America, 147(3), 1939-1952. Lien externe
Parenteau, M., & Laurendeau, É. (2020). A general modal frequency-domain vortex lattice method for aeroelastic analyses. Journal of Fluids and Structures, 99, 13 pages. Lien externe
Plante, F., Dandois, J., Beneddine, S., Laurendeau, É., & Sipp, D. (2020). Link between subsonic stall and transonic buffet on swept and unswept wings: from global stability analysis to nonlinear dynamics. Journal of Fluid Mechanics, 908, A16 (40 pages). Lien externe
Prakash, A., & Laurendeau, É. (2020). Consistent surface roughness extension for wall functions. International Journal of Heat and Fluid Flow, 82, 11 pages. Lien externe
Rafiee, M., Farahani, R. D., & Therriault, D. (2020). Multi-Material 3D and 4D Printing: A Survey. Advanced Science Letters, 7(12), 1902307 (26 pages). Lien externe
Rafiee, M., Hosseini Rad, S., Nitzsche, F., Laliberte, J., & Labrosse, M. R. (2020). Significant fatigue life enhancement in multiscale doubly-modified fiber/epoxy nanocomposites with graphene nanoplatelets and reduced-graphene oxide. Polymers, 12(9), 2135 (10 pages). Disponible
Rastegar, S., Arnoux, P. J., Wang, X., & Aubin, C.-É. (2020). Biomechanical analysis of segmental lumbar lordosis and risk of cage subsidence with different cage heights and alternative placements in transforaminal lumbar interbody fusion. Computer Methods in Biomechanics and Biomedical Engineering, 23(9), 456-466. Lien externe
Rohart, V., Dubé, M., & Laberge Lebel, L. (2020). Effects of temperature on the apparent lap shear strength of resistance-welded carbon fibre/thermoplastic composite joints. SAMPE Journal, 55(3), 30-37. Non disponible
Rohart, V., Laberge Lebel, L., & Dube, M. (2020). Effects of environmental conditions on the lap shear strength of resistance-welded carbon fibre/thermoplastic composite joints. Composites Part B: Engineering, 198, 10 pages. Lien externe
Rohart, V., Laberge Lebel, L., & Dube, M. (2020). Improved adhesion between stainless steel heating element and PPS polymer in resistance welding of thermoplastic composites. Composites Part B: Engineering, 188, 12 pages. Lien externe
Rohart, V., Laberge Lebel, L., & Dube, M. (2020). Influence of freeze/thaw cycling on the mechanical performance of resistance-welded carbon fibre/polyphenylene sulphide composite joints. Journal of Reinforced Plastics and Composites, 39(21-22), 837-851. Lien externe
Ruspi, M. L., Palanca, M., Cristofolini, L., Liebsch, C., Villa, T., Brayda-Bruno, M., Galbusera, F., Wilke, H.-J., & La Barbera, L. (2020). Digital Image Correlation (DIC) Assessment of the Non-Linear Response of the Anterior Longitudinal Ligament of the Spine during Flexion and Extension. Materials, 13(2), 14 pages. Lien externe
Saberi, M., Niknam, S. A., & Hashemi, R. (2020). On the impacts of cutting parameters on surface roughness, tool wear mode and size in slot milling of A356 metal matrix composites reinforced with silicon carbide elements. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 235(10), 1655-1667. Lien externe
Safavi, M., Balazinski, M., Mehmanparast, H., & Niknam, S. A. (2020). Experimental characterization of tool wear morphology and cutting force profile in dry and wet turning of titanium metal matrix composites (Ti-MMCs). Metals, 10(11), 14 pages. Disponible
Samadi, B., Raison, M., Achiche, S., & Fortin, C. (2020). Identification of the most relevant intervertebral effort indicators during gait of adolescents with idiopathic scoliosis. Computer Methods in Biomechanics and Biomedical Engineering, 23(10), 664-674. Lien externe
Savard, B., Wehrfritz, A., Lam, K., Margerte, Q., Ferney, L., & Farjam, S. (2020). Decreased mixture reactivity and hot flame speed in the products of diffusion-affected autoignitive cool flames in the NTC regime. Combustion and Flame, 222, 434-445. Lien externe
Sepahi-Boroujeni, A., Hosseini-Hashemi, S., & Sepahi-Boroujeni, S. (2020). Effects of surface tension of graphene sheet on impact and rebound behavior of colliding nanoparticle. Superlattices and Microstructures, 140, 106464 (11 pages). Lien externe
Sepahi-Boroujeni, S., Mayer, J. R. R., & Khameneifar, F. (2020). Repeatability of on-machine probing by a five-axis machine tool. International Journal of Machine Tools and Manufacture, 152, 19 pages. Lien externe
Serra, M., Crouzat, S., Simon, G., Vétel, J., & Haller, G. (2020). Material spike formation in highly unsteady separated flows. Journal of Fluid Mechanics, 883, 27 pages. Lien externe
Shan, X., & Birglen, L. (2020). Modeling and analysis of soft robotic fingers using the fin ray effect. International Journal of Robotics Research, 39(14), 1686-1705. Lien externe
Sharifzadeh-Kermani, A., Arjmand, N., Vossoughi, G., Shirazi-Adl, A., Patwardhan, A. G., Parnianpour, M., & Khalaf, K. (2020). Estimation of Trunk Muscle Forces Using a Bio-Inspired Control Strategy Implemented in a Neuro-Osteo-Ligamentous Finite Element Model of the Lumbar Spine. Frontiers in Bioengineering and Biotechnology, 8, 12 pages. Lien externe
Shen, J., Parent, S., Wu, J. S., Aubin, C.-É., Mac-Thiong, J.-M., Kadoury, S., Newton, P. O., Lenke, L. G., Lafage, V., Barchi, S., & Labelle, H. (2020). Towards a new 3D classification for adolescent idiopathic scoliosis. Spine deformity, 8(3), 387-396. Lien externe
Siguerdidjane, W., Khameneifar, F., & Gosselin, F. (2020). Efficient planning of peen-forming patterns via artificial neural networks. Manufacturing Letters, 25, 70-74. Lien externe
Singh, J., Kim, M.-S., Kaushik, L., Kang, J.-H., Kim, D., Martin, É., & Choi, S.-H. (2020). Twinning-detwinning behavior of E-form Mg alloy sheets during in-plane reverse loading. International Journal of Plasticity, 127, 102637. Lien externe
Sun, Y., Causse, P., Benmokrane, B., & Trochu, F. (2020). Permeability Measurement of Granular Porous Materials by a Modified Falling-Head Method. Journal of Engineering Mechanics, 146(9), 11 pages. Lien externe
Testoni, O., Bergamini, A., Bodkhe, S., & Ermanni, P. (2020). A novel concept for adaptive friction damper based on electrostatic adhesion. Smart Materials and Structures, 29(10), 10 pages. Lien externe
Toche, B., Pellerin, R., & Fortin, C. (2020). Set-based design: a review and new directions. Design Science, 6, 41 pages. Disponible
Trofimov, A., Markov, A., & Sevostianov, I. (2020). Replacement relations for elastic composite materials having different matrices and related problems. Acta Mechanica, 231(6), 2335-2350. Lien externe
Tucny, J.-M., Vidal, D., Leclaire, S., & Bertrand, F. (2020). Comparison of existing and extended boundary conditions for the simulation of rarefied gas flows using the Lattice Boltzmann method. International Journal of Modern Physics C, 31(5), 2050070. Lien externe
Wang, X., Yeung, K., Cheung, J. P. Y., Lau, J. Y.-N., Qi, W., Cheung, K. M.-C., & Aubin, C.-É. (2020). A novel scoliosis instrumentation using special superelastic nickel-titanium shape memory rods: a biomechanical analysis using a calibrated computer model and data from a clinical trial. Spine Deformity, 8(3), 369-379. Lien externe
Wu, Y., Schmitt, T., Bousser, É., Khelfaoui, F., Najarian, V., Sapieha, J.-E., & Brochu, M. (2020). Effects of interfacial microstructure on mechanical properties of Stellite-hardfaced coating during long-term aging. Surface and Coatings Technology, 398, 11 pages. Lien externe
Wu, Y., Schmitt, T., Bousser, É., Vernhes, L., Khelfaoui, F., Perez, G., Sapieha, J.-E., & Brochu, M. (2020). Microstructural and mechanical characterization of Stellite-hardfaced coatings with two types of buffer layers. Surface and Coatings Technology, 390, 11 pages. Lien externe
Xing, K., Mayer, J. R. R., & Achiche, S. (2020). Impact of Model Complexity in the Monitoring of Machine Tools Condition Using Volumetric Errors. International Journal of Automation Technology, 14(3), 369-379. Lien externe
Zou, S., Therriault, D., & Gosselin, F. (2020). Spiderweb-inspired, transparent, impact-absorbing composite. Cell Reports Physical Science, 1(11), 100240 (17 pages). Disponible
Abderrefai, Y., Diouf Lewis, A., Farahani, R. D., & Therriault, D. (2020). Objective 1: Design and formulate different HTRT materials (PEI or PEEK) reinforced with carbon fibers. (Rapport technique). Non disponible
Ben Youssef, Y., Lakis, A. A., & Kerboua, Y. (2020). Développement d'une formulation pour l'étude du comportement dynamique non linéaire des coques cylindriques isotropes. (Rapport technique n° EPM-RT-2020-01). Disponible
Chauvette, J.-F., Hia, I. L., Brzeski, D., Farahani, R. D., & Therriault, D. (2020). Objective 4: Develop a printing process for direct deposition of acoustic abradable materials on composite structures featuring flat and curved geometries. (Rapport technique). Non disponible
Farahani, R. D., & Therriault, D. (2020). Advanced manufacturing of composites for structural and acoustic applications. (Rapport technique). Non disponible
Farahani, R. D., Lévesque, M., & Therriault, D. (2020). Advanced manufacturing of composites for structural and acoustic applications. (Rapport technique). Non disponible
Farahani, R. D., Lévesque, M., & Therriault, D. (2020). Advanced manufacturing of composites for structural and acoustic applications. (Rapport technique). Non disponible
Garcia Perez, J., Trépanier, J.-Y., Leclaire, S., Reggio, M., & Benmeddour, A. (2020). Lattice Boltzmann approach for the modeling and simulation of water droplets impact and freezing. (Rapport technique). Non disponible
Lebedev, O., Trofimov, A., Lévesque, M., & Therriault, D. (2020). Supplementary Objective 1: 3D reinforced composites manufactured by Resin Transfer Molding (RTM). (Rapport technique). Non disponible
Pierre, J., Farahani, R. D., & Therriault, D. (2020). Objective 3: Additive manufacturing of acoustic sandwich panels using the materials developed in O1. (Rapport technique). Non disponible
Sosa Rey, F., Lingua, A., Lampron, O., Lévesque, M., & Therriault, D. (2020). Objective 2: Predict mechanical response of AM composites. (Rapport technique). Non disponible
Chouinard, U., Cio, Y.-S. L.-K., Vadean, A., & Achiche, S. (octobre 2020). Concurrent modeling of positive and negative dependencies in the design structure matrix using complex numbers [Communication écrite]. 22nd International Dependency and Structure Modeling Conference (DSM 2020), Cambridge, Massachusetts. Lien externe
Coulombe, C., Gamache, J.-F., Barron, O., Descôteaux, G., Saussié, D., & Achiche, S. (août 2020). Task Taxonomy for Autonomous Unmanned Aerial Manipulator: A Review [Communication écrite]. ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. Lien externe
Delhez, E., Golinval, J.-C., Nyssen, F., & Batailly, A. (septembre 2020). Comparative study of blades reduced order models with geometrical nonlinearities and contact interfaces [Communication écrite]. ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition (GT 2020) (12 pages). Lien externe
Diouf-Lewis, A., Mastromatteo, L., Farahani, R. D., Piccirelli, N., & Therriault, D. (novembre 2020). Characterization and additive manufacturing of aerospace-grade thermoplastics composites [Communication écrite]. 7th Global Conference on Polymer and Composite Materials (PCM 2020). Non disponible
Fernandez-Escudero, C., Gagnon, M., Laurendeau, É., Prothin, S., Ross, A., & Michon, G. (janvier 2019). Experimental and Numerical Aeroelastic Analysis of Airfoil-Aileron System with Nonlinear Energy Sink [Communication écrite]. 37th IMAC, A Conference and Exposition on Structural Dynamics, Orlando, FL, United states. Lien externe
Gamache, J.-F., Vadean, A., Dodane, N., & Achiche, S. (août 2020). Topology Optimization for Stiffened Panels: A Ground Structure Method [Communication écrite]. ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. Lien externe
Ghezelbash, F., Schmidt, H., Shirazi-Adl, A., & El-Rich, M. (juillet 2019). Internal load-sharing in the human passive lumbar spine: Review of in vitro and finite element model studies [Communication écrite]. 3rd International Workshop on Spinal and Deformation, Berlin, Germany (11 pages). Publié dans Journal of Biomechanics, 102. Lien externe
Ghezelbash, F., Shirazi-Adl, A., Baghani, M., & Eskandari, A. H. (juillet 2019). On the modeling of human intervertebral disc annulus fibrosus: Elastic, permanent deformation and failure responses [Communication écrite]. 3rd International Workshop on Spinal Loading and Deformation, Berlin, Germany (10 pages). Publié dans Journal of Biomechanics. Lien externe
Ghezelbash, F., Shirazi-Adl, A., El Ouaaid, Z., Plamondon, A., & Arjmand, N. (juillet 2019). Subject-specific regression equations to estimate lower spinal loads during symmetric and asymmetric static lifting [Communication écrite]. 3rd International Workshop on Spinal Loading and Deformation, Berlin, Germany (12 pages). Publié dans Journal of Biomechanics, 102. Lien externe
Herbinger, F., & Kummert, M. (juin 2020). Physics- and Statistics-Based Quality Control of Weather Files [Communication écrite]. 11th Conference of IBPSA-Canada (eSIM 2020), Vancouver, BC, Canada (8 pages). Lien externe
Hernandez, S., Achiche, S., Spooner, D., Vadean, A., & Raison, M. (août 2020). On Supporting the Learning of Biomechanics Using Multidisciplinary Physical Prototyping [Communication écrite]. ASME 2020 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (10 pages). Lien externe
Lambert, L., Pelletier, D., & Garon, A. (janvier 2020). Adaptive Construction of Model-Consistent Wall Functions for Two-Equation Turbulence Models with Applications [Communication écrite]. AIAA Scitech 2020 Forum, Orlando, Floride. Lien externe
Law-Kam Cio, Y.-S., Ma, Y., Vadean, A., Beltrame, G., & Achiche, S. (août 2020). Objective reduction using axiomatic design and product-related dependencies : a layout synthesis of an autonomous greenhouse case study [Communication écrite]. ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (10 pages). Lien externe
Liguori, V., Papillon-Laroche, H., Parenteau, M., & Laurendeau, É. (janvier 2020). Design and Development of a Computational Fluid Dynamics Software in the Context of a Capstone Project [Communication écrite]. AIAA Scitech 2020 Forum, Orlando, Florida. Lien externe
Lussier, E., Martel, L., Spooner, D., & Dubreuil-Cousineau, M. (juin 2020). Using CDIO to develop project learning activities for younger student [Communication écrite]. 16th International CDIO Conference, Gothenburg, Sweden. Lien externe
Mahecha, D., Beaudry, C., Armellini, F., & Aubin, C.-É. (juillet 2020). What can latent dirichlet allocation topic modeling say about ecosystems [Communication écrite]. 3rd International Conference on Advanced Research Methods and Analytics (CARMA 2020). Non disponible
Mohebbi, A., Amiri, P., & Kearney, R. E. (juillet 2020). Contributions of Vision in Human Postural Control: A Virtual Reality-based Study [Communication écrite]. 42nd Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC 2020), Montréal, Québec. Lien externe
Mouazé, N., Nguyen, T., & Birglen, L. (mai 2020). Twisting string actuation with noncircular wrapping rods [Communication écrite]. USCToMM Symposium on Mechanical Systems & Robotics (MSR 2020), Rapid City, SD, USA. Lien externe
Muller, E., Vautrin, Y., Pelletier, D., & Garon, A. (janvier 2020). A local adaptive remeshing procedure for unsteady incompressible viscous flows [Communication écrite]. AIAA Scitech Forum, Orlando, FL, USA (22 pages). Lien externe
Parenteau, M., Bourgault-Cote, S., Plante, F., & Laurendeau, É. (mai 2020). Development of parallel CFD applications on distributed memory with chapel [Communication écrite]. 34th IEEE International Parallel and Distributed Processing Symposium Workshops (IPDPSW 2020), New Orleans, LA, USA. Lien externe
Prieto Chavez, C. J., & Cimmino, M. (juin 2020). A Hybrid Numerical-Analytical Method to Evaluate Short-Term Temperatures Changes in Geothermal Boreholes [Communication écrite]. 11th Conference of IBPSA-Canada (eSIM 2020), Vancouver, BC, Canada (8 pages). Lien externe
Scolan, Y.-M., & Étienne, S. (novembre 2020). Analyse du champs de pression dans les écoulements à surface libre fortement accélérés [Analysis of the pressure field in highly accelerated free surface flows]. [Communication écrite]. 17e journées de l'hydrodynamique (JH 2020), Cherbroug-on-Cotentin (11 pages). Non disponible
Shirazi-Adl, A., Schmidt, H., & Kingma, I. (juillet 2019). 3rd International workshop on spinal loading and deformation [Communication écrite]. 3r International Workshop on Spinal Loading and Deformation, Berlin, Germany (4 pages). Publié dans Journal of Biomechanics, 102. Lien externe
Taha, H., Yacout, S., & Birglen, L. (novembre 2020). Robotic arms anomalies and degradation monitoring and detection by using machine learning [Communication écrite]. Stuttgart Conference on the Automotive Production (SCAP 2020). Non disponible
Testoni, O., Bodkhe, S., Ermanni, P., & Bergamini, A. (septembre 2020). Mechanical Characterization of a Novel Concept of Adaptive Electrostatic Friction Damper [Communication écrite]. Conference on Smart Materials, Adaptive Structures and Intelligent Systems (ASME 2020) (7 pages). Lien externe
Vautrin, Y., Muller, E., Pelletier, D., Étienne, S., & Béguin, C. (janvier 2020). Automatic adaptive remeshing for unsteady interfacial flows with surface tension [Communication écrite]. AIAA Scitech Forum, Orlando, FL, USA. Lien externe
Xing, K., Liu, X., Liu, Z., Mayer, J. R. R., & Achiche, S. (octobre 2020). Low-Cost Precision Monitoring System of Machine Tools for SMEs [Communication écrite]. 8th CIRP Global Web Conference on Flexible Mass Customisation (CIRPe 2020). Publié dans Procedia CIRP, 96. Lien externe
Xing, K., Rimpault, X., Mayer, J. R. R., Chatelain, J.-F., & Achiche, S. (octobre 2019). Quantitative assessment of machine tools condition through fractal analysis of volumetric error vector similarity measures [Communication écrite]. 7th CIRP Global Web Conference (CIRPe 2019), Berlin, Germany. Publié dans Procedia CIRP, 86. Lien externe
Jadayel, M., & Khameneifar, F. (juin 2020). Improving the geometric accuracy of additive manufactured parts via 3D metrology feedback and CAD morphing [Affiche]. 3rd Holistic Innovation in Additive Manufacturing Conference (HI-AM 2020). Non disponible
Ma, Y., Sanmiguel, D., Lessard, D., Thériault, L., Achiche, S., Arora, A., Mate, K., Lemire, B., Hijal, T., Schuster, T., Kildea, J., De Pokomandy, A., Cox, J., Kronfli, N., Klein, M., & Lebouché, B. (juillet 2020). Chatbot MARVIN: Development study of an Intelligent Conversational Agent to Promote HIV Patients' Engagement in Care and Management of ART Adherence Barriers [Affiche]. 23rd International AIDS Conference (AIDS 2020: Virtual). Lien externe
Mustafy, T., Londono, I., Moldovan, F., & Villemure, I. (août 2020). Bone benefits from pubertal exercise are sustained after detraining in male rats [Affiche]. World Congress on Osteoporosis, Osteoarthritis and Musculoskeletal Diseases (WCO-IOF-ESCEO 2020). Publié dans Osteoporosis International, 31(Suppl. 1). Lien externe
Ning, B., Laporte, C., Mustafy, T., & Villemure, I. (août 2020). High impact loading applied during puberty intensifies bone (re)modelling in growing rats [Affiche]. Non spécifié. Lien externe
Plante, F., Dandois, J., & Laurendeau, É. (janvier 2019). Similarities Between Cellular Patterns Occurring in Transonic Buffet and Subsonic Stall [Résumé]. AIAA Science and Technology Forum and Exposition (AAIA SciTech) / AIAA Guidance, Navigation, and Control Conference, San Diego, CA. Publié dans AIAA Journal, 58(1). Lien externe
Ma, Y., Bock, G., Cherni, G., Lemire, B., Therrien, R., Thériault, L., Lessard, D., Engler, K., & Achiche, S. (novembre 2020). Meet Marvin, the CHATBOT : using artificial intelligence to engage HIV patients in their antiretroviral therapy [Présentation]. Dans Workshop on Healthy Living with HIV. Lien externe
Ma, Y., Bock, G., Cherni, G., Thériault, L., Lessard, D., Achiche, S., & Lebouché, B. (juillet 2020). Marvin : Intelligent conversational agent for HIV patient self-management [Présentation]. Dans 23e Congrès international sur le sida (SIDA 2020). Non disponible
Absi, C. (2020). Développement de rivets en composite de carbone et poly(étheréthercétone) pour les structures aéronautiques [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Ali, M. S. (2020). Two Dimensional Compressible Flow Solver for Moving Geometries Using Immersed Boundary Method [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Bahrami Torabi, H. (2020). Finite Element Model to Investigate the Dynamic Instability of a Rectangular Plate Subjected to Supersonic Airflow [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Bérard, F. P. (2020). Une application de la méthode des vitesses et de l'interpolation transfinie à la modélisation de l'interaction fluide-structure d'un cylindre circulaire [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Blanchet, L. (2020). Development of a Procedure to Optimize the Geometric and Dynamic Designs of Assistive Upper Limb Exoskeletons [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Boudina, M. (2020). On the Mechanics of Flow-Induced Vibration of Soft Corals and Particle Interception [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Broggi, C. (2020). Conception et fabrication additive d'une structure bio-inspirée pour un rover lunaire en composites thermoplastiques [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Couture, A. (2020). Linear Stability Analysis of Fluid-Structure Problems Using Time-Linearized Coupled Formulations [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Couture-Peck, D. (2020). Une application de la méthode des vitesses et de l'interpolation transfinie à la modélisation de l'interaction fluide-structure d'un cylindre elliptique oscillant [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Descôteaux, G. (2020). Système autonome d'assistance au repas pour les personnes avec un handicap du haut du corps [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Desmarais, A. (2020). Extension of a 2D Multiblock Structured Overset Suite to a Fully 3D Multiblock Unstructured Flow Solver [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Dhar, L. (2020). Étude de l'injection d'air à travers des fentes dans un écoulement d'eau transverse [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Dubost, C. (2020). Roue Cyr et matériaux composites : modéliser une discipline de cirque pour enrichir son langage acrobatique [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Duperré, A. (2020). Guidage et planification réactive de trajectoire d'un drone monoculaire contrôlé par intelligence artificielle [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Garcia Perez, J. (2020). Lattice Boltzmann Approach for the Modeling and Simulation of Water Droplets Impact and Freezing [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Gondran, M. (2020). Tressage automatisé de pièces complexes avec solution inverse itérative asservie en angle [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Labrecque Nadeau, D. (2020). Outil d'aide à la conception de produits modulaires en vue de leur fin de vie [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Lakis, A. J. (2020). Experimental and Analytical Stress and Strain Characterization of Notched Composite Plates [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Lallam, W. (2020). Analyse énergétique d'un système de pompe à chaleur transcritique au CO2 pour le chauffage combiné [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Leroy, L. (2020). Modelling Neighborhood-Scale Energy Scenarios [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Masoumipour, A. (2020). Design and Optimization of Air-Liquid Cooling System for Aerospace Applications [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Nguyen, T. T. (2020). Étude des performances aérodynamiques par simulations numériques d'un concept d'aéronef à décollage et atterrissage vertical (VTOL) destiné à la mobilité urbaine [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Popescu, G. M. (2020). Conception d'un quadrirotor à rotors inclinables pour le suivi de trajectoires agressives [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Popescu, R. I. (2020). Design et développement d'un quadrirotor joueur de tennis de table avec des hélices inclinables [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Recchia, G. (2020). Conception et validation d'outils pour injection sur profil aérant [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Seifollahi Moghadam, Z. (2020). Evaluation of Mesh Characteristics for Scale-Resolving Simulation of Incompressible Flows [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Sentissi, M. L. (2020). Développement d'une méthodologie d'essais de fatigue vibratoire HCF pour les métaux [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Strugala, G. (2020). Experimental Testing and Modelling of Variable Capacity Air-to-Air Heat Pumps [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Tari, M. (2020). Flutter Instability of a Reconfiguring Beam with Large Displacement [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Amiri, S. (2020). Transitional Flow Prediction in High Reynolds Flows Over Hydrofoils [Thèse de doctorat, Polytechnique Montréal]. Disponible
Ashrafi, F. (2020). Passive Flow Control at Impeller Radial Bend for Stall Delay in Centrifugal Compressors with Fishtail Pipe Diffusers [Thèse de doctorat, Polytechnique Montréal]. Disponible
Bakhtiari, M. (2020). Nonlinear vibration and Supersonic Flutter of Conical Shells [Thèse de doctorat, Polytechnique Montréal]. Disponible
Boulvert, J. (2020). Traitements acoustiques à porosité contrôlée pour atténuation optimale [Thèse de doctorat, Polytechnique Montréal]. Disponible
Hodonou, C. M. É. (2020). Méthode de sélection systématique des procédés de fabrication des composants structuraux d'aéronefs pour une production économique et écologique [Thèse de doctorat, Polytechnique Montréal]. Disponible
Huang, W. (2020). Analysis of Through-Thickness Injection in Liquid Composite Molding Based on Digital Material Twins [Thèse de doctorat, Polytechnique Montréal]. Disponible
Joachim, J. (2020). Développement de modèles numériques de roues aubagées désaccordées dans un contexte non-linéaire [Thèse de doctorat, Polytechnique Montréal]. Disponible
Laliberté-Riverin, S. (2020). Développement de nouvelles méthodes de mesure du seuil de fragilisation par hydrogène sur l'AISI 4340 électroplaqué [Thèse de doctorat, Polytechnique Montréal]. Disponible
Langot, J. (2020). Multi-Physics Modeling of Aerospace Composites Exposed to Fire [Thèse de doctorat, Polytechnique Montréal]. Disponible
Muller, É. (2020). Une méthode d'éléments finis adaptative pour les écoulements instationnaires complexes [Thèse de doctorat, Polytechnique Montréal]. Disponible
Namvar, S. (2020). High Fidelity Numerical Simulation of 3D Arc Extinction in a High Voltage Circuit Breaker [Thèse de doctorat, Polytechnique Montréal]. Disponible
Plante, F. (2020). Towards Understanding Stall Cells and Transonic Buffet Cells [Thèse de doctorat, Polytechnique Montréal]. Disponible
Vautrin, Y. (2020). Modélisation et simulation numérique d'écoulements diphasiques de fluides séparés par une interface avec une méthode d'éléments finis adaptatives en espace et en temps [Thèse de doctorat, Polytechnique Montréal]. Disponible
Zoghlami, S. (2020). Modélisation numérique des écoulements diphasiques dispersés [Thèse de doctorat, Polytechnique Montréal]. Disponible
Zou, S. (2020). Bioinspired Tough Materials with Microstructured Sacrificial Bonds Based on Instability-Assisted 3D Printing [Thèse de doctorat, Polytechnique Montréal]. Disponible
Piccirelli, N., Bazin, B., Therriault, D., Lafrance, T., & Trudeau Lalonde, F. (2020). Extruder head for additive manufacturing, system and process for additive manufacturing. [Tête d'extrusion pour fabrication additive, système et procédé de fabrication additive]. (Brevet no CA3041017). Lien externe
Laberge Lebel, L., & Alsinani, N. A. (2020). Pultrusion system with cooling stage and method therefor. (Demande de brevet no WO2020237381). Lien externe
Therriault, D., Iervolino, F., Pierre, J., Piccirelli, N., Ross, A., & Costa Baptista, J. (2020). Acoustic panel and associated manufacturing method. [Panneau acoustique et procédé de fabrication associé]. (Demande de brevet no CA3084631). Lien externe
Trudeau, P., Laberge Lebel, L., Hoste, D., & Landry, A. (2020). Composite rivet blank and installation thereof. (Demande de brevet no US20200171758). Lien externe
Breumier, S., Sao-Joao, S., Villani, A., Lévesque, M., & Kermouche, G. (2020). High strain rate micro-compression for crystal plasticity constitutive law parameters identification [Ensemble de données]. Lien externe
Laliberté-Riverin, S., Bellemare, J., Sirois, F., & Brochu, M. (2020). Determination of hydrogen embrittlement stress intensity threshold by fractography [Ensemble de données]. Lien externe
Selwanis, M., Rishmawi, S., Franzini, G., Béguin, C., & Gosselin, F. (2020). Wind tunnel demonstration of galloping mitigation with a purely nonlinear energy sink [Ensemble de données]. Lien externe
Hébert, A. (2020). Applied Reactor Physics. (3e éd.). Lien externe
Barron, O., Raison, M., & Achiche, S. (2020). Control of transhumeral prostheses based on electromyography pattern recognition: from amputees to deep learning. Dans Powered Prostheses (p. 1-21). Lien externe