Up a level |
Abanto, J., Reggio, M., Barrero, D., & Petro, E. (2007). Prediction of Fire and Smoke Propagation in an Underwater Tunnel. Tunnelling and Underground Space Technology, 22(1), 90-95. External link
Achiche, S., Baron, L., Balazinski, M., & Benaoudia, M. (2007). Online prediction of pulp brightness using fuzzy logic models. Engineering Applications of Artificial Intelligence, 20(1), 25-36. External link
Ajji, A., Denault, J., Côté, D., Bureau, M., & Trudel-Boucher, D. (2007). Polypropylene nanocomposite fibers : structure and some applications. International Polymer Processing, 22(4), 368-374. External link
Akrout, K., & Baron, L. (2007, May). Existence d'un manipulateur 6R sphérique pour lequel la demi-sphère ouverte est une surface isotrope continue [Paper]. CCToMM Mechanisms, Machines, and Mechatronics Symposium (M3 2007), Saint-Hubert, Québec. External link
Akrout, K., Baron, L., & Wang, X. (2007, June). Existence d'une infinité non dénombrable de position isotropes pour les manipulateurs séries 5R sphérique [Paper]. 12th World Congress in Mechanisms and Machine Science, Besancon, France. Unavailable
Akrout, K., Baron, L., Balazinski, M., & Achiche, S. (2007, June). Influence of the migration process on the learning performances of fuzzy knowledge bases [Paper]. 2004 annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2007), San Diego, CA, United States. External link
Aliyu, M. D. S., & Boukas, E.-K. (2007, July). Mixed ℋ2/ℋ∞ nonlinear filtering [Paper]. European Control Conference (ECC 2007), Kos, Greece. External link
Alloui, Z., Nguyen, T. H., & Bilgen, E. (2007). Numerical Investigation of Thermo-Bioconvection in a Suspension of Gravitactic Microorganisms. International Journal of Heat and Mass Transfer, 50(7-8), 1435-1441. External link
Arjmand, N., & Shirazi-Adl, A. (2007, June). Single-level biomechanical mosels of the spine fail to satisfy equilibrium at other levels [Paper]. CANCAM 2007, Toronto, Ontario. Unavailable
Arjmand, N., Shirazi-Adl, A., & Parnianpour, M. (2007, February). On equilibrium violations by single-level free body diagram models of spine biomechanics [Paper]. Transactions of the 53rd Orthopedic Research Society, San Diego, California. Unavailable
Arjmand, N., Shirazi-Adl, A., & Parnianpour, M. (2007). Trunk Biomechanical Models Based on Equilibrium at a Single-Level Violate Equilibrium at Other Levels. European Spine Journal, 16(5), 701-709. External link
Aubin, C.-É., Labelle, H., & Ciolofan, O. C. (2007). Variability of Spinal Instrumentation Configurations in Adolescent Idiopathic Scoliosis. European Spine Journal, 16(1), 57-64. External link
Aubin, C.-É., Labelle, H., Cheriet, F., Villemure, I., Mathieu, P. A., & Dansereau, J. (2007). Tridimensional Evaluation and Optimization of the Orthotic Treatment of Adolescent Idiopathic Scoliosis. Medecine Sciences, 23(11), 904-909. External link
Ayers, R. A., Burkes, D. E., Gottoli, G., Yi, H. C., Zhim, F., Yahia, L., & Moore, J. J. (2007). Combustion Synthesis of Porous Biomaterials. Journal of Biomedical Materials Research. Part A, 81A(3), 634-643. External link
Badri, B., Thomas, M., Archambault, R., Sassi, S., & Lakis, A. A. (2007, June). Rapid Julien transform: A new method for shock detection and time-domain classification [Paper]. 20th International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2007), Faro, Portugal. Unavailable
Badri, B., Thomas, M., Archambault, R., Sassi, S., Lakis, A. A., & Mureithi, N. W. (2007, December). Une nouvelle méthode pour différentier les signaux de chocs synchrones et asynchrones [A new method to detect synchronous and asynchronous shock data in a signal]. [Paper]. 1er Congrès international sur l'ingénierie des risques industriels (CIRI 2007), Montréal, Québec. Unavailable
Badri, B., Thomas, M., Sassi, S., & Lakis, A. A. (2007, June). Combination of bearing defect simulator and artificial neural network for the diagnosis of damaged bearings [Paper]. 20th International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2007), Faro, Portugal. Unavailable
Badri, B., Thomas, M., Sassi, S., Archambault, R., Lakis, A. A., & Mureithi, N. W. (2007, October). The shock extractor [Paper]. 25th Seminar on Machinery Vibration (CMVA 2007), St. John, New Brunswick (11 pages). External link
Bahloul, A., Vasseur, P., & Robillard, L. (2007). Convection of a Binary Fluid Saturating a Shallow Porous Cavity Subjected to Cross Heat Fluxes. Journal of Fluid Mechanics, 574, 317-342. External link
Balamurugan, K., Sankaranarayanane, K., Zhou, X., & Rigaud, M. (2007). Rheology of steel fibre containing alumina-magnesia-extruded graphite pellets self-flowing castables. China's Refractories, 16(2), 11-16. External link
Banaszak, Y. (2007). Étude numérique et expérimentale de la mise en forme de renforts fibreux et application à la préparation de préformes [Master's thesis, École Polytechnique de Montréal]. Available
Barello, R. B., & Lévesque, M. (2007, June). Comparaison du spectre de relaxation des composites obtenu à partir des modèles d'homogénéisation et des simulations éléments finis [Paper]. 15es Journées nationales sur les composites, Marseille, France. External link
Baron, L. (2007, June). Inverse kinematics of functionally-redundant serial manipulators : a comparative study [Paper]. 12th World Congress on the Theory of Machines and Mechanisms, Besancon, France. Unavailable
Bazrgari, B. (2007). Biodynamic of the human spine [Ph.D. thesis, École Polytechnique de Montréal]. Available
Bazrgari, B., & Shirazi-Adl, A. (2007, June). Biomechanics of stroop and squat lifts using kinematics-driven approach [Paper]. CANCAM 2007, Toronto, Ontario. Unavailable
Bazrgari, B., & Shirazi-Adl, A. (2007). Spinal stability and role of passive stiffness in dynamic squat and stoop lifts. Computer Methods in Biomechanics and Biomedical Engineering, 10(5), 351-360. External link
Bazrgari, B., & Shirazi-Adl, A. (2007, February). Spinal stability and role of passive stiffness in squat and stoop dynamic liftings [Paper]. Transactions of the 53rd Orthopedic Research Society, San Diego, California. Unavailable
Bazrgari, B., Shirazi-Adl, A., & Arjmand, N. (2007). Analysis of Squat and Stoop Dynamic Liftings : Muscle Forces and Internal Spinal Loads. European Spine Journal, 16(5), 687-699. External link
Ben Daly, H., Ben Brahim, H., Hfaied, N., Harchay, M., & Boukhili, R. (2007). Investigation of water absorption in pultruded composites containing fillers and low profile additives. Polymer Composites, 28(3), 355-364. External link
Ben Daly, H., Cole, K. C., Nguyen, K. T., & Sanschagrin, B. (2007). Characterization of Molecular Orientation in Injection-Stretch-Blow-Molded Poly(Ethylene Terephthalate) Bottles by Means of External Reflection Infrared Spectroscopy. Journal of Applied Polymer Science, 104(2), 1319-1327. External link
Ben Mhenni, A. A. (2007). Influence de l'état de surface et du serrage sur les outils assemblés par frettage [Ph.D. thesis, École Polytechnique de Montréal]. Available
Ben Mhenni, A., Mascle, C., & Balazinski, M. (2007). Agility in High Speed Machining: Optimization between Tool and Holder. In Advances in Integrated Design and Manufacturing in Mechanical Engineering II (pp. 475-488). External link
Bernier, M., & Salim-Shirazi, A. (2007, June). Solar heat injection into boreholes : a preliminary analysis [Paper]. 32e annual conference of the Solar Energy Society of Canada and the second Canadian Solar Research Network conference, Calgary, Alta. Unavailable
Bernier, M., Kummert, M., & Bertagnolio, S. (2007, September). Development and application of test cases for comparing vertical ground heat exchangers models [Paper]. Building Simulation 2007 : 10th International IBPSA conference, Beijing, China. External link
Bilgen, E., & Ben Yedder, R. (2007). Natural Convection in Enclosure With Heating and Cooling by Sinusoidal Temperature Profiles on One Side. International Journal of Heat and Mass Transfer, 50(1-2), 139-150. External link
Borggaard, J., Hay, A., & Pelletier, D. (2007). Interval-Based Reduced-Order Models for Unsteady Fluid Flow. International Journal of Numerical Analysis and Modeling, 4(3-4), 353-367. External link
Bouffard, D.-A. (2007). Simulation par éléments finis des contraintes résiduelles de soudage en fonction des paramètres de soudage robotisé [Master's thesis, École Polytechnique de Montréal]. Available
Bougherara, H., Bureau, M., Campbell, M., Vadean, A., & Yahia, L. (2007). Design of a Biomimetic Polymer-Composite Hip Prosthesis. Journal of Biomedical Materials Research. Part A, 82A(1), 27-40. External link
Boukas, E.-K. (2007). Singular Linear Systems With Delay: H-Infinity Stabilization. Optimal Control Applications & Methods, 28(4), 259-274. External link
Boukas, E.-K. (2007). State Feedback Stabilization of Nonlinear Discrete-Time Systems With Time-Varying Time Delay. Nonlinear Analysis-Theory Methods & Applications, 66(6), 1341-1350. External link
Boukas, E.-K., & Mahmoud, M. S. (2007). A practical approach to control of nonlinear discrete-time state-delay systems. Optimal Control Applications and Methods, 28(6), 397-417. External link
Boulay, J.-A., Ozell, B., Côté, M., Labelle, H., & Aubin, C.-É. (2007, May). A collaborative virtual reality simulator for scoliotic spine surgery training [Paper]. SSH Symposium on Computer Simulation in Medicine (CompMed). Unavailable
Bourgeois, J., Trépanier, J.-Y., Guibault, F., & Tribes, C. (2007, January). Characterizing global behaviour of approximation functions [Paper]. 45th AIAA Aerospace Sciences Meeting, Reno, NV, United States. External link
Bracher, S., Baron, L., & Wang, X. (2007, June). Rotating table with parallel kinematic featuring a planar joint [Paper]. 12th World Congress in Mechanisms and Machine Science, Besancon, France. Unavailable
Bui-Quoc, T., Julien, D., & Lévesque, M. (2007). Effet d'une déformation plastique combinée au grenaillage sur le comportement statique et en fatigue de l'aluminium 7475-T7351. (Technical Report). Unavailable
Calatoru, V. (2007). Usure par diffusion des outils en carbure pendant l'usinage des alliages d'aluminium [Master's thesis, École Polytechnique de Montréal]. Available
Calatoru, V. D., Balazinski, M., & Mayer, J. R. R. (2007, June). Aspects of the tool wear of carbide tools during high speed machining of aluminum alloys [Paper]. CANCAM 2007, Toronto, Ontario. Unavailable
Calatoru, V. D., Balazinski, M., & Mayer, J. R. R. (2007, June). Method for analyzing the effects of aluminum build-up on tungsten carbide tools behavior [Paper]. CANCAM 2007, Toronto, Ontario. Unavailable
Carrier, B. (2007). Amélioration du procédé de fabrication d'alésages par fraisage orbital [Master's thesis, École Polytechnique de Montréal]. Available
Chavez Yanez, M. (2007). Application de la CFD pour la prédiction de l'environnement intérieur d'un bâtiment [Master's thesis, École Polytechnique de Montréal]. Available
Chen, W. H. (2007). Development of an optimization theory based tool (AutoPOM) for the Bell 427 helicopter simulation model validation [Master's thesis, École Polytechnique de Montréal]. Available
Cheriet, F., Laporte, C., Kadoury, S., Labelle, H., & Dansereau, J. (2007). A Novel System for the 3-D Reconstruction of the Human Spine and Rib Cage From Biplanar X-Ray Images. IEEE Transactions on Biomedical Engineering, 54(7), 1356-1358. External link
Chevrefils, C., Cheriet, F., Grimard, G., & Aubin, C.-É. (2007, August). Watershed segmentation of intervertebral disk and spinal canal from MRI images [Paper]. 4th International Conference on Image Analysis and Recognition (ICIAR 2007), Montréal, Québec. External link
Clin, J., Aubin, C.-É., & Labelle, H. (2007). Virtual Prototyping of a Brace Design for the Correction of Scoliotic Deformities. Medical & Biological Engineering & Computing, 45(5), 467-473. External link
Cloutier, L. P., Aubin, C.-É., & Grimard, G. (2007). Biomechanical Study of Anterior Spinal Instrumentation Configurations. European Spine Journal, 16(7), 1039-1045. External link
Cori, J.-F. (2007). Contribution à l'analyse et au design optimal de phénomènes d'interactions fluides-structures [Master's thesis, École Polytechnique de Montréal]. Available
Cori, J.-F., Étienne, S., Hay, A., Pelletier, D., Trépanier, J.-Y., & Borggaard, J. (2007, January). Optimal design of airfoils using NURBS and a continuous sensitivity equation method [Paper]. 45th AIAA Aerospace Sciences Meeting, Reno, NV, United States. External link
Croteau-Labouly, B. (2007). Caractérisation combinée de la perméabilité et de la compaction des renforts fibreux dans les procédés de fabrication des composites par infusion [Master's thesis, École Polytechnique de Montréal]. Available
Croteau-Labouly, B., Achim, V., Ruiz, E., & Trochu, F. (2007, August). Combined characterization of permeability and compaction in porous media during vacuum assisted resin infusion [Paper]. 6th Canadian International Composites Conference (CANCOM 2007), Winnipeg, Canada. Unavailable
Croteau-Labouly, B., Achim, V., Ruiz, E., Trochu, F., & Gauvin, R. (2007, October). Analysis of permeability and compaction of fibre reinforcement during vacuum assisted resin infusion [Paper]. 8th Seminar on Experimental Techniques and Design in Composite Materials, Costa Rel, Sardaigne, Italie. Unavailable
Dallaire, J., Tribes, C., & Trépanier, J.-Y. (2007, April). Flexible transonic wing design optimization with discipline-oriented decompositions [Paper]. 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Waikiki, HI, United States. External link
Daqoune, T. (2007). Analyse expérimentale sur des renforts tissés d'un procédé d'injection flexible pour la fabrication rapide des composites [Master's thesis, École Polytechnique de Montréal]. Available
Davarani, S. Z., Parnianpour, M., Shirazi-Adl, A., Hemami, H., Mousavi, S. J., & Shirazi-Adl, A. (2007). Dynamic iso-resistive trunk extension simulation: Contributions of the intrinsic and reflexive mechanisms to spinal stability. Technology and Health Care, 15(6), 415-431. External link
De Guise, J. A., Yahia, L., Duval, N., Godbout, B., Koller, A., Sati, M., Hagemeister, N., Parent, G., & El Maach, I. (2007). System for the analysis of 3D kinematic of the knee. (Patent no. US7291119). External link
Demaria, C., Ruiz, E., & Trochu, F. (2007). In-Plane Anisotropic Permeability Characterization of Deformed Woven Fabrics by Unidirectional Injection. Part I: Experimental Results. Polymer Composites, 28(6), 797-811. External link
Demaria, C., Ruiz, E., & Trochu, F. (2007). In-Plane Anisotropic Permeability Characterization of Deformed Woven Fabrics by Unidirectional Injection. Part II: Prediction Model and Numerical Simulations. Polymer Composites, 28(6), 812-827. External link
Desroches, G., Aubin, C.-É., Sucato, D. J., & Rivard, C. H. (2007). Simulation of an Anterior Spine Instrumentation in Adolescent Idiopathic Scoliosis Using a Flexible Multi-Body Model. Medical & Biological Engineering & Computing, 45(8), 759-768. External link
Di Caro, R. (2007). Analyse de sensibilité de forme pour le modèle de turbulence k-e [Master's thesis, École Polytechnique de Montréal]. Available
Di Caro, R., Hay, A., Étienne, S., & Pelletier, D. (2007, June). Application of a shape sensitivity equation method to turbulent flow over obstacles [Paper]. 18th AIAA Computational Fluid Dynamics Conference, Miami, FL, United States. External link
Di Caro, R., Hay, A., Étienne, S., & Pelletier, D. (2007, January). Continuous shape sensitivity equation method for the K-Epsilon ; model of turbulence [Paper]. 45th AIAA Aerospace Sciences Meeting 2007, Reno, NV, United States. External link
Dimitrievska, S., Ajji, A., Bureau, M., Petit, A., & Yahia, L. (2007, April). Novel bioactive polymer-apatite nanocomposite fibres and their biocompatibility [Paper]. International Symposium on Polymeric Materials for Regenerative Medicine 2007, Boucherville, Québec. External link
Dimitrievska, S., Petit, A., Ajji, A., Bureau, M., & Yahia, L. (2007, February). Biocompatibility of a novel bioactive polymer-apatite nanocomposite [Paper]. 53rd Annual Meeting of the Orthopaedic Research Society, San Diego, CA. Published in Tissue Engineering, 13(4). Unavailable
Dionne, R. (2007). Étude préliminaire de l'utilisation de la réalité virtuelle pour l'analyse de tolérance [Master's thesis, École Polytechnique de Montréal]. Available
Eca, L., Hoekstra, M., Hay, A., & Pelletier, D. (2007). A Manufactured Solution for a Two-Dimensional Steady Wall-Bounded Incompressible Turbulent Flow. International Journal of Computational Fluid Dynamics, 21(3-4), 175-188. External link
Eça, L., Hoekstra, M., Hay, A., & Pelletier, D. (2007). On the Construction of Manufactured Solutions for One and Two-Equation Eddy-Viscosity Models. International Journal for Numerical Methods in Fluids, 54(2), 119-154. External link
Eca, L., Hoekstra, M., Hay, A., & Pelletier, D. (2007). Verification of Rans Solvers With Manufactured Solutions. Engineering with Computers, 23(4), 253-270. External link
Ekinci, T. O., & Mayer, J. R. R. (2007, June). Relationships between straightness and angular kinematic errors in machines [Paper]. CANCAM 2007, Toronto, Ontario. Unavailable
Ekinci, T. O., & Mayer, J. R. R. (2007). Relationships Between Straightness and Angular Kinematic Errors in Machines. International Journal of Machine Tools and Manufacture, 47(12-13), 1997-2004. External link
Epure, L. M., Dimitrievska, S., Merhi, Y., & Yahia, L. (2007). The Effect of Varying Al₂O₃ Percentage in Hydroxyapatite/ Al₂O₃ Composite Materials: Morphological, Chemical and Cytotoxic Evaluation. Journal of Biomedical Materials Research. Part A, 83A(4), 1009-1023. External link
Étienne, S., Hay, A., Cori, J.-F., Pelletier, D., & Garon, A. (2007, June). An unsteady sensitivity equation method for fast evaluation of FSI nearby configurations [Paper]. 18th AIAA Computational Fluid Dynamics Conference, Miami, FL, United States. External link
Étienne, S., Hay, A., Garon, A., & Pelletier, D. (2007, January). Sensitivity analysis of unsteady fluid-structure interaction problems [Paper]. 45th AIAA Aerospace Sciences Meeting 2007, Reno, NV, United States. External link
Farand, P., Garon, A., & Plante, G. E. (2007). Structure of Large Arteries: Orientation of Elastin in Rabbit Aortic Internal Elastic Lamina and in the Elastic Lamellae of Aortic Media. Microvascular Research, 73(2), 95-99. External link
Fauteux, C., Longtin, R., Pegna, J., & Therriault, D. (2007). Fast Synthesis of ZnO Nanostructures by Laser-Induced Decomposition of Zinc Acetylacetonate. Inorganic Chemistry, 46(26), 11036-11047. External link
Feuvrier, J. (2007). Étude numérique du remplissage et des transferts thermiques pour la fabrication de pièces composites par injection sur renforts [Master's thesis, École Polytechnique de Montréal]. Available
Feuvrier, J., Soukane, S., & Trochu, F. (2007, June). Three-dimensional analysis of mold insulation in resin transfer molding [Paper]. 19th Canadian Materials Science Conference, Hamilton, Canada. Unavailable
Fortin, C., & Huet, G. (2007). Manufacturing process management: iterative synchronisation of engineering data with manufacturing realities. International Journal of Product Development, 4(3-4), 280-95. External link
Fournier, S. (2007). Gestion des changements et systèmes d'informations pour le développement de produits complexes et personnalisés [Master's thesis, École Polytechnique de Montréal]. Available
Gagné, S., & Fortin, C. (2007). Application of the CMII model to an integrated engineering and manufacturing development environment. International Journal on Interactive Design and Manufacturing (IJIDeM), 1(1), 5-13. External link
Galvan, S. R. (2007). Optimization of the inlet velocity profile of the turbine 99 draft tube [Ph.D. thesis, École Polytechnique de Montréal]. Available
Ghafar-Zadeh, E., Sawan, M., & Therriault, D. (2007). Novel Direct-Write Cmos-Based Laboratory-on-Chip: Design, Assembly and Experimental Results. Sensors and Actuators A: Physical, 134(1), 27-36. External link
Giammichele, N. (2007). Modélisation géométrique multi-résolution pour la génération et l'optimisation d'ailes d'avion [Master's thesis, École Polytechnique de Montréal]. Available
Giammichele, N., Trépanier, J.-Y., & Tribes, C. (2007, April). Airfoil generation and optimization using multiresolution B-spline control with geometrical constraints [Paper]. 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Waikiki, HI, United States. External link
Gloukhov, R., Tribes, C., Trépanier, J.-Y., & Ozell, B. (2007, January). Towards web standards-based MDA and MDO [Paper]. 45th AIAA Aerospace Sciences Meeting, Reno, NV, United States. External link
Goduguchinta, R., & Pegna, J. (2007). Position Dependence of Growth Rate in Convection Enhanced Laser Cvd of Carbon Rods. Applied Physics. A, Materials Science & Processing, 88(2), 329-332. External link
Goduguchinta, R., & Pegna, J. (2007). Variational Analysis of LCVD Rod Growth. Applied Physics. A, Materials Science & Processing, 88(1), 191-200. External link
Granger, D. (2007). Amortissement d'une poutre par traitement viscoélastique contraint et analyse du régime transitoire suite à un impact [Master's thesis, École Polytechnique de Montréal]. Available
Gravelle, A., Ross, A., Pettigrew, M. J., & Mureithi, N. W. (2007). Damping of Tubes Due to Internal Two-Phase Flow. Journal of Fluids and Structures, 23(3), 447-462. External link
Haroutunian, A. (2007). Optimisation géométrique de la pile structurale d'aspirateurs d'installations hydroélectriques basse-chute [Master's thesis, École Polytechnique de Montréal]. Available
Hassan, M. F., & Boukas, E.-K. (2007). Multilevel Technique for Large Scale Lqr With Time-Delays and Systems Constraints. International Journal of Innovative Computing Information and Control, 3(2), 419-434. External link
Hay, A., & Pelletier, D. (2007, June). Code and Solution Verification of an adaptive finite element turbulent flow solver [Paper]. 18th AIAA Computational Fluid Dynamics Conference, Miami, FL, United States. External link
Hay, A., & Visonneau, M. (2007). Adaptive Finite-Volume Solution of Complex Turbulent Flows. Computers & Fluids, 36(8), 1347-1363. External link
Hébert, A. (2007, April). A nuclear data library production system for advanced lattice codes [Paper]. International Conference on Nuclear Data for Science and Technology, Nice, France. External link
Hébert, A. (2007). A Review of Legacy and Advanced Self-Shielding Models for Lattice Calculations. Nuclear Science and Engineering, 155(2), 310-320. External link
Huet, G., Culley, S. J., Mcmahon, C. A., & Fortin, C. (2007). Making Sense of Engineering Design Review Activities. AI EDAM-Artificial Intelligence for Engineering Design Analysis and Manufacturing, 21(3), 243-266. External link
Huo, L., & Baron, L. (2007, May). Inverse kinematics of functionally-redundant serial manipulators under joint limits and singularity avoidance [Paper]. Conference on Systems and Control (CSC 2007), Marrakech, Morocco. Unavailable
Huynh, A.-M., Aubin, C.-É., Mathieu, P. A., & Labelle, H. (2007). Simulation of Progressive Spinal Deformities in Duchenne Muscular Dystrophy Using a Biomechanical Model Integrating Muscles and Vertebral Growth Modulation. Clinical Biomechanics, 22(4), 392-399. External link
Huynh, A.-M., Aubin, C.-É., Rajwani, T., Bagnall, K. M., & Villemure, I. (2007). Pedicle Growth Asymmetry as a Cause of Adolescent Idiopathic Scoliosis: a Biomechanical Study. European Spine Journal, 16(4), 523-529. External link
Ilinca, F., & Pelletier, D. (2007). Computation of Accurate Nodal Derivatives of Finite Element Solutions: the Finite Node Displacement Method. International Journal for Numerical Methods in Engineering, 71(10), 1181-1207. External link
Ilinca, F., & Pelletier, D. (2006, September). A continuous shape sensitivity equation method for unsteady laminar flows [Paper]. European Conference on Computational Fluid Dynamics, The Netherlands. Published in International Journal of Computational Fluid Dynamics, 21(7-8). External link
Ilinca, F., Pelletier, D., & Borggaard, J. (2007). A Continuous Second-Order Sensitivity Equation Method for Time-Dependent Incompressible Laminar Flows. International Journal for Numerical Methods in Fluids, 55(6), 565-587. External link
Iolova, K., Bernier, M., & Charneux, R. (2007, June). Detailed energy simulations of a net zero energy triplex in Montréal [Paper]. 32e annual conference of the Solar Energy Society of Canada and the second Canadian Solar Research Network conference, Calgary, Alb.. Unavailable
Jean-Dallaire, J. (2007). Décompositions par disciplines pour l'optimisation d'une aile flexible en régime transsonique [Master's thesis, École Polytechnique de Montréal]. Available
Jiang, H., Nguyen, T. H., & Prud'homme, M. (2007). Optimal Control of Induction Heating for Semi-Solid Aluminum Alloy Forming. Journal of Materials Processing Technology, 189(1-3), 182-191. External link
Kadoury, S., Cheriet, F., Dansereau, J., & Labelle, H. (2007). Three-Dimensional Reconstruction of the Scoliotic Spine and Pelvis From Uncalibrated Biplanar X-Ray Images. Journal of Spinal Disorders & Techniques, 20(2), 160-167. External link
Karthikeyan, R., & Hébert, A. (2007). Performance of Advanced Self-Shielding Models in Dragon for the Estimation of Candu-6 Safety Parameters. Nuclear Technology, 157(3), 299-316. External link
Kerboua, Y., & Lakis, A. A. (2007, December). Dynamical behavior of plates subjected to a flowing fluid [Paper]. 3rd WSEAS International Conference on Applied and Theoretical Mechanics (MECHANICS 2007), Canary Islands, Spain. External link
Kerboua, Y., Lakis, A. A., Thomas, M., & Marcouiller, L. (2007). Hybrid Method for Vibration Analysis of Rectangular Plates. Nuclear Engineering and Design, 237(8), 791-801. External link
Kerboua, Y., Lakis, A. A., Thomas, M., Marcouiller, L., & Toorani, M. H. (2007). Dynamic analysis of coupled-fluid structure systems. WSEAS Transactions on Applied and Theoretical Mechanics, 1(2), 265-274. Unavailable
Kerboua, Y., Lakis, A. A., Thomas, M., Marcouiller, L., & Toorani, M. H. (2007, June). Dynamic analysis of coupled-fluid structure systems [Paper]. 20th International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2007), Faro, Portugal. Unavailable
Khalvatti, A. (2007). Effect of preferential flexibility angle on fluidelastic instability of a rotated triangular tube bundle [Master's thesis, École Polytechnique de Montréal]. Available
Khalvatti, A., Mureithi, N. W., & Pettigrew, M. J. (2007, July). Effect of preferential flexibility angle on fluidelastic instability of a rotated triangular tube bundle [Paper]. ASME Pressure Vessels and Piping Conference (PVP 2007), San Antonio, TX, United states. Unavailable
Khoukhi, A. (2007). Planification multi-objectif de trajectoires pour manipulateurs robotiques par lagrangien augmenté et techniques neuro-floues [Ph.D. thesis, École Polytechnique de Montréal]. Available
Khoukhi, A., Baron, L., & Balazinski, M. (2007, May). Application of augmented lagrangian to mulit-objective trajectory planning of mobile robots [Paper]. Conference on Systems and Control (CSC 2007), Marrakech, Morocco. Unavailable
Khoukhi, A., Baron, L., & Balazinski, M. (2007, June). Fuzzy parking manoeuvres of wheeled mobile robots [Paper]. Annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2007), San Diego, CA, United States. External link
Khoukhi, A., Baron, L., & Balazinski, M. (2007, May). Multi-Objective Trajectory Planning for Redundant Manipulators Using Gradient Projection and Augmented Lagrangian [Planification multi-objective de trajectoire des manipulateurs redondants par lagrangien augmenté]. [Paper]. CCToMM Mechanisms, Machines, and Mechatronics Symposium (M3 2005), Saint-Hubert (12 pages). External link
Khoukhi, A., Baron, L., & Balazinski, M. (2007). A Projected Gradient Augmented Lagrangian Approach to Multi-Objective Trajectory Planning of Redundant Robots. Transactions of the Canadian Society for Mechanical Engineering, 31(4), 391-405. External link
Khoukhi, A., Demirli, K., Baron, L., & Balazinski, M. (2007, October). Neuro-Fuzzy multi-objective trajectory planning of redundant manipulators [Paper]. IEEE International Conference on Systems, Man and Cybernetics, Montréal, Québec. External link
Khoukhi, L., Baron, L., & Balazinski, M. (2007, May). An augmented lagrangian with projection technique to multi-objective trajectory planning of redundant manipulators [Paper]. CCToMM Mechanisms, Machines, and Mechatronics Symposium (M3 2007), Saint-Hubert, Québec. Unavailable
Khoukhi, L., Baron, L., & Balazinski, M. (2007, June). Multi-objective trajectory planning for redundant manipulators [Paper]. 5th International Conference on Industrial Automation, Montréal, Québec. Unavailable
Khoukhi, L., Baron, L., & Balazinski, M. (2007, May). Multi-objective trajectory planning for redundant manipulators using augmented lagrangian [Paper]. CCToMM Mechanisms, Machines, and Mechatronics Symposium (M3 2007), Saint-Hubert, Québec. External link
Kiapour, A., Shirazi-Adl, A., & Parnianpour, M. (2007, June). Can simple trunk muscle model balance and stabilize lumbar muscle during support of symmetric and asymmetric loads? A FE model study [Paper]. ASME summer Bioengineering Conference, Keystone, Colorado. External link
Klim, H. Z., Balazinski, M., & Szczepanski, P. (2007, June). Cascading failures analysis [Paper]. 7e Congrès international de génie industriel, Trois Rivières, Québec. Unavailable
Klim, Z. H., & Balazinski, M. (2007, September). Methodology for the common mode analysis [Paper]. SAE AeroTech Congress and Exhibition (AEROTECH 2007), Los Angeles. External link
Klim, Z. H., Szczepanski, P., & Balazinski, M. (2007). Causes and effects of cascading failures in aircraft systems. Diagnostyka, 41(1), 19-26. External link
Komgom, N. C., Mureithi, N. W., Lakis, A. A., & Safizadeh, M. S. (2007). Analyse des signatures vibratoires de l'Ecospeed. (Technical Report). Unavailable
Komgom, N. C., Mureithi, N. W., Lakis, A. A., & Thomas, M. (2007, October). Bearing fault detection using pattern recognition methods applied to the Case Western Reserve University bearing data [Paper]. 25th Seminar on Machinery Vibration (CMVA 2007), St. John, New Brunswick. Unavailable
Komgom, N. C., Mureithi, N. W., Lakis, A. A., & Thomas, M. (2007, December). On the use of time synchronous averaging, independent component analysis and support vector machines for bearing fault diagnosis [Paper]. 1er Congrès international sur l'ingénierie des risques industriels (CIRI 2007), Montréal, Québec. External link
Komgom, N. C., Mureithi, N. W., Lakis, A. A., & Thomas, M. (2007, December). Time synchronous analysis and pattern recognition methods for bearing fault detection [Paper]. 1er Congrès international sur l'ingénierie des risques industriels (CIRI 2007), Montréal, Québec. Unavailable
Komgom, N. C., Mureithi, N. W., Roussier, B., & Lakis, A. A. (2007). Design of the experimental test rig for the analysis of vibration response of rotating machinery components. (Technical Report). Unavailable
Kuhn, M., Napporn, T., Meunier, M., Vengallatore, S., & Therriault, D. (2007, August). Direct-write microfabrication and testing of solid oxide micro fuel cells [Paper]. 13th Canadian Semiconductor Technology Conference, Montréal, Québec. Unavailable
Kuhn, M., Napportn, T., Meunier, M., Therriault, D., & Vengallatore, S. (2007, November). Single-chamber solid-oxide micro fuel cells with geometrically-complex electrodes [Paper]. MRS Fall Meeting, Boston, Ma.. Unavailable
Kuhn, M., Napportn, T., Meunier, M., Vengallatore, S., & Therriault, D. (2007, April). Fabrication and characterization of single-chamber micro-solid oxide fuel cells with interdigitated electrodes [Paper]. Hydrogen and Fuel Cells 2007 : International Conference and Trade Show, Vancouver, BC. Unavailable
Kummert, M., Bernier, M., Costa, A., & Paris, J. (2007). A comparison between geothermal absorption and compression heat pumps for space conditioning. International Journal of Environmental Studies, 64(4), 467-487. External link
Labelle, H., Bellefleur, C., Joncas, J., Aubin, C.-É., & Cheriet, F. (2007). Preliminary Evaluation of a Computer-Assisted Tool for the Design and Adjustment of Braces in Idiopathic Scoliosis - a Prospective and Randomized Study. Spine, 32(8), 835-843. External link
Laberge Lebel, L., Aissa, B., El Khakani, M. A., & Therriault, D. (2007, October). Three-dimensional (3D) microstructures of SWCNT-polymer nanocomposites by means of UV-assisted direct-writing [Paper]. Polymer nanocomposites 2007, Montréal, Québec. Unavailable
Laberge Lebel, L., Aissa, B., El Khakani, M. A., & Therriault, D. (2007, December). Three-dimensional microstructures of SWCNT-polymer nanocomposites by a microfluidic infiltration approach [Paper]. Crepec 2007, Montréal, Québec. External link
Laberge Lebel, L., Aissa, B., ElKhakani, M. A., & Therriault, D. (2007, November). 3D reinforced SWCNT-polymer nanocomposite beams by means of microfluidic infiltration [Paper]. MRS Fall Meeting, Boston, Ma.. Unavailable
Laberge Lebel, L., Aissa, B., ElKhakani, M. A., & Therriault, D. (2007, October). Three-dimensional microstructures of SWCNT-polymer nanocomposites by means of UV-assisted direct-writing [Paper]. Simha Symposium on Polymer Physics and Polymer Nanocomposites, Montréal, Québec. Unavailable
Lacasse, D., Garon, A., & Pelletier, D. (2007). Development of an Adaptive Discontinuous-Galerkin Finite Element Method for Advection-Reaction Equations. Computer Methods in Applied Mechanics and Engineering, 196(17-20), 2071-2083. External link
Lacasse, D., Garon, A., & Pelletier, D. (2007). Mechanical hemolysis in blood flow: user-independent predictions with the solution of a partial differential equation. Computer Methods in Biomechanics and Biomedical Engineering, 10(1), 1-12. External link
Lafortune, P., Aubin, C.-É., Boulanger, H., Villemure, I., Bagnall, K. M., & Moreau, A. (2007). Biomechanical simulations of the scoliotic deformation process in the pinealectomized chicken: a preliminary study. Scoliosis and Spinal Disorders, 2(1), 16. Available
Lakis, A. A. (2007, November). Rotating machinery fault diagnosis using time-frequency methods [Paper]. 7th WSEAS International Conference on Electric Power Systems, High Voltages, Electric Machines, Venice, Italy. External link
Lakis, A. A., Brusuc, G., & Toorani, M. (2007, May). Fluid free surface effect on the vibration analysis of cylindrical shells [Paper]. International Congress on Advances in Nuclear Power Plants (ICAPP 2007), Nice, France. Unavailable
Lalonde, N. M., Dansereau, J., Lacoste, M., & Aissaoui, R. (2007). Modelling Skin Pelvic Landmark Coordinates Into Corresponding Internal Bone for Wheelchair Users. IEEE Transactions on Biomedical Engineering, 54(1), 11-18. External link
Lam, J., Shu, Z., Xu, S., & Boukas, E.-K. (2007). Robust H-Infinity Control of Descriptor Discrete-Time Markovian Jump Systems. International Journal of Control, 80(3), 374-385. External link
Le Song, G., & Prud'homme, M. (2007). Prediction of Coherent Vortices in an Impinging Jet With Unsteady Averaging and a Simple Turbulent Model. International Journal of Heat and Fluid Flow, 28(5), 1125-1135. External link
Le Tellier, R., & Hébert, A. (2007). An Improved Algebraic Collapsing Acceleration With General Boundary Conditions for the Characteristics Method. Nuclear Science and Engineering, 156(2), 121-138. External link
Le Tellier, R., & Hébert, A. (2007, April). A PWR assembly computational scheme based on the DRAGON V4 lattice code [Paper]. Joint International Topical Meeting on Mathematics and Computations and Supercomputing in Nuclear Applications, M and C + SNA 2007, Monterey, CA, United States. External link
Leclerc, J. S. (2007). Amélioration du procédé RTM par l'optimisation des paramètres d'injection [Master's thesis, École Polytechnique de Montréal]. Available
Leclerc, J.-S., Meunier, P., & Ruiz, E. (2007, June). Impact of injection pressure on voids formation and on mechanical properties of RTM composites [Paper]. 19th Canadian Materials Science Conference, Hamilton, Ontario. Unavailable
Leroyer, A., Hay, A., & Visonneau, M. (2007). Flow/motion interaction using a Navier-Stokes solver with automatic local grid refinement; application to slamming. Mécanique & Industries, 8(2), 151-160. Unavailable
Leroyer, A., Hay, A., & Visonneau, M. (2007). Interaction écoulement/mouvement par un solveur Navier-Stokes avec adaptation locale de maillage; application à l'étude du slamming. [Flow/motion interaction using a Navier-Stokes solver with automatic local grid refinement; application to slamming]. Mécanique & Industries, 8(2), 151-160. External link
Lévesque, M., Gilchrist, M. D., Bouleau, N., Derrien, K., & Baptiste, D. (2007, June). Inversion numérique des transformées de Laplace-Carson rencontrées dans les problèmes d'homogénéisation [Paper]. 15es Journées nationales sur les composites, Marseille, France. External link
Lévesque, M., Gilchrist, M. D., Bouleau, N., Derrien, K., & Baptiste, D. (2007). Numerical Inversion of the Laplace-Carson Transform Applied to Homogenization of Randomly Reinforced Linear Viscoelastic Media. Computational Mechanics, 40(4), 771-789. External link
Longtin, R. (2007). Synthèse et caractérisation de recouvrements organisés de nanofibres de carbone par dépôt chimique en phase vapeur assisté par laser [Ph.D. thesis, École Polytechnique de Montréal]. Available
Longtin, R., Carignan, L. P., Fauteux, C., Therriault, D., & Pegna, J. (2007). Selective Area Synthesis of Aligned Carbon Nanofibers by Laser-Assisted Catalytic Chemical Vapor Deposition. Diamond and Related Materials, 16(8), 1541-1549. External link
Longtin, R., Fauteux, C., Goduguchinta, R., & Pegna, J. (2007). Synthesis of Carbon Nanofiber Films and Nanofiber Composite Coatings by Laser-Assisted Catalytic Chemical Vapor Deposition. Thin Solid Films, 515(5), 2958-2964. External link
Lu, H., Maranzana, R., & Mascle, C. (2007, June). Decomposition of delta volume for machining [Paper]. 12th IFToMM World Congress in Mechanism and Machine Science, Besançon, France. Unavailable
Maire, M., Ajji, A., Bureau, M., Robitaille, L., & Yahia, L. (2007, April). Hemocompatibility of new fibrous PET structures with and without surface modification [Paper]. International Symposium on Polymeric Materials for Regenerative Medicine 2007. External link
Majdouline, Y., Aubin, C.-É., Robitaille, M., Sarwark John, F., & Labelle, H. (2007). Scoliosis correction objectives in adolescent idiopathic scoliosis. Journal of pediatric orthopedics, 27(7), 775-781. External link
Marineau, E. C., & Reggio, M. (2007, May). A MATLAB Toolbox for the Intuitive Knowledge of Turbomachinery [Paper]. ASME Turbo Expo: Power for Land, Sea, and Air (GT 2007), Montreal, Canada. External link
Martel, S., Mathieu, J.-B., Felfoul, O., Chanu, A., Aboussouan, É., Tamaz, S., Pouponneau, P., Beaudoin, G., Soulez, G., Yahia, L., & Mankiewicz, M. (2007). Automatic Navigation of an Untethered Device in the Artery of a Living Animal Using a Conventional Clinical Magnetic Resonance Imaging System. Applied Physics Letters, 90(11), 14105-14105. External link
Martel, S., Mathieu, J.-B., Felfoul, O., Chanu, A., Aboussouan, É., Tamaz, S., Pouponneau, P., Yahia, L., Beaudoin, G., Soulez, G., & Mankiewicz, M. (2007, October). Medical and technical protocol for automatic navigation of a wireless device in the carotid artery of a living swine using a standard clinical MRI system [Paper]. 10th International Conference on Medical Image Computing and Computer-Assisted Intervention (MICCAI 2007), Brisbane, Australia. External link
Martin, A., Trépanier, J.-Y., Reggio, M., & Guo, X. Y. (2007). Transient Ablation Regime in Circuit Breakers. Plasma Science & Technology, 9(6), 653-656. External link
Mascle, C., Lu, H., & Maranzana, R. (2007, July). Machining process planning using decomposition of delta volume [Paper]. IEEE International Symposium on Assembly and Manufacturing (ISAM 2009), Ann Arbor, MI, USA. External link
Miao, H. Y., Larose, S., Lévesque, M., & Perron, C. (2007, April). Finite element models of shot peening processes [Paper]. CASI Aero 2007, Toronto, Canada. Unavailable
Miao, H. Y., Lévesque, M., Perron, C., & Larose, S. (2007, September). 3D random finite element model for shop peening process [Paper]. SAE AeroTech Congress and Exhibition (AEROTECH 2007), Los Angeles, California. Unavailable
Michaud April, S. (2007). Influence du grenaillage sur la vie en fatigue d'un alliage d'aluminium [Master's thesis, École Polytechnique de Montréal]. Available
Mokbi, S., & Shirazi-Adl, A. (2007, June). Investigation of nonlinear coupled diffusion of oxygen, glucose and lactic acid in human disc [Paper]. CANCAM 2007, Toronto, Ontario. Unavailable
Moknbi, S. D., Shirazi-Adl, A., & Urban, J. P. G. (2007, February). Alterations in endplates markedly influence the nutrition of intervertebral discs [Paper]. Transactions of the 53rd Orthopedic Research Society, San Diego, California. External link
Moreno, M., Ajji, A., & Bureau, M. (2007, June). New fibrous PET structures for vascular grafts : effect of fiber structure on endothelial and smooth muscle cell attachment and growth [Paper]. 7th International Symposium on Frontiers in Biomedical Polymers, Gent, Belgium. External link
Muftuoglu, A. (2007). Heat transfer in open cavities from discrete heaters at their optimum positions [Master's thesis, École Polytechnique de Montréal]. Available
Mureithi, N. W., Soroush, S., & Pettigrew, M. J. (2007, July). Quasi-static forces and stability analysis in a triangular tube bundle subjected to two-phase cross flow [Paper]. ASME Pressure Vessels and Piping Conference (PVP 2007), San Antonio, Texas. External link
Nafi, A. (2007). Étude de la performance de machines à mesurer tridimensionnelles en utilisant un calibre étagé [Master's thesis, École Polytechnique de Montréal]. Available
Nault, M. L., Labelle, H., Aubin, C.-É., & Balazinski, M. (2007). The Use of Fuzzy Logic to Select Which Curves Need to Be Instrumented and Fused in Adolescent Idiopathic Scoliosis - a Feasibility Study. Journal of Spinal Disorders & Techniques, 20(8), 594-603. External link
Ndiaye, D. (2007). Étude numérique et expérimentale de la performance en régime transitoire de pompes à chaleur eau-air en cyclage [Ph.D. thesis, École Polytechnique de Montréal]. Available
Ortega, I., Billotte, C., & Ruiz, E. (2007, October). Thermo-mechanical and rheological characterization of various epoxy-based nanocomposites for high performance composites [Paper]. 4th International Symposium on Polymer Nanocomposites Science and Technology, Boucherville, Québec. Unavailable
Oudadesse, H., Derrien, A. C., Mami, M., Martin, S., Cathelineau, G., & Yahia, L. (2007). Aluminosilicates and Biphasic HA-TCP Composites: Studies of Properties for Bony Filling. Biomedical Materials, 2(1), S59-S64. External link
Oulmane, A. (2007). Dynamique transitoire d'une plaque impactée, partiellement recouverte d'un traitement amortissant contraint [Master's thesis, École Polytechnique de Montréal]. Available
Pagès, L. (2007). Maximisation de la laminarité d'un profil d'aile par optimisation de la forme de l'extrados [Master's thesis, École Polytechnique de Montréal]. Available
Paul, A. A. (2007). Tool path generation for roughing integrally bladed rotors using cup mill cutters [Master's thesis, École Polytechnique de Montréal]. Available
Pazos, V., Cheriet, F., Dansereau, J., Ronsky, J., Zernicke, R. F., & Labelle, H. (2007). Reliability of Trunk Shape Measurements Based on 3-D Surface Reconstructions. European Spine Journal, 16(11), 1882-1891. External link
Petro, E., & Reggio, M. (2007, October). Storyboard and fire simulation on an apartment building [Paper]. Advanced Workshop on Fire and Computer Modeling, Santander, Spain. Unavailable
Pettigrew, M. J., Yetisir, M., Fisher, N. J., Taylor, C. E., & Smith, B. A. W. (2007, July). A simple energy approach to assess vibration and fretting-wear damage in process equipment [Paper]. ASME-PVP 2007, San Antonio, Texas. External link
Picard, D. (2007). Production d'eau chaude domestique dans les maisons à consommation énergétique nette zéro [Master's thesis, École Polytechnique de Montréal]. Available
Picard, D., Bernier, M., & Charneux, R. (2007, June). Domestic hot water production in a net zero energy triplex in Montréal [Paper]. 32e annual conference of the Solar Energy Society of Canada and the second Canadian Solar Research Network conference, Calgary, Alb.. Unavailable
Popov, A. M., Lozovik, Y. E., Fiorito, S., & Yahia, L. (2007). Biocompatibility and Applications of Carbon Nanotubes in Medical Nano Robots. International Journal of Nanomedicine, 2(3), 361-372. External link
Prud'homme, M., & Le Quere, P. (2007). Stability of stratified natural convection in a tall vertical annular cavity. Physics of Fluids, 19(9), 094106-094106. External link
Qun, R., Baron, L., & Balazinski, M. (2007, May). Sensitivity analysis for type-1 and type-2 TSK fuzzy models modcounterpart [Paper]. 18th IASTED, International Conference on Modelling and Simulation, Montréal, Québec. External link
Ramambason, D. S. R., & Vasseur, P. (2007). Influence of a Magnetic Field on Natural Convection in a Shallow Porous Enclosure Saturated With a Binary Fluid. Acta Mechanica, 191(1-2), 21-35. External link
Raouf, J. (2007). Stabilité et commande des systèmes singuliers stochastiques [Ph.D. thesis, École Polytechnique de Montréal]. Available
Raouf, J., & Boukas, E.-K. (2007, December). H[infinity symbol] state feedback controller design of stochastic singular systems with discontinuities [Paper]. 46th IEEE Conference on Decision and Control, New Orleans, Louisiana. External link
Raouf, J., & Boukas, E.-K. (2007, July). Stochastic output feedback controller of singular Markovian jump systems with discontinuities [Paper]. European Control Conference 2007 (ECC), Kos, Greece. External link
Raymond, J., & Bilgen, E. (2007). On the Thermal and Ventilation Performance of Composite Walls. Energy and Buildings, 39(9), 1041-1046. External link
Raymond, L. D., Laflamme, G. Y., Ranger, P., Zhim, F., & Girard, J. (2007). Ostéotomie tibiale « rétrotubérositaire » à coin ouvert : une technique innovante. [Open-wedge retro-tubercular tibial osteotomy: an innovating technique]. Revue de chirurgie orthopédique et réparatrice de l'appareil moteur, 93(6), 588-593. External link
Reid, T. (2007). Méthodes pour la vérification d'un code de mécanique des fluides [Master's thesis, École Polytechnique de Montréal]. Available
Ren, Q., Qin, Z., Baron, L., Birglen, L., & Balazinski, M. (2007, June). Identification of rigid-body dynamics of robotic manipulators using type-2 fuzzy logic filter [Paper]. Annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2007), San Diego, CA, United States. External link
Rigaud, M. (2007, September). FIRE still growing [Paper]. UNITECR 2007, Dresden, Germany. Unavailable
Riou, A. (2007). Intégration de modèles de caractéristiques (features) à une modélisation géométrique pour supporter l'analyse métiers [Master's thesis, École Polytechnique de Montréal]. Available
Riou, A., & Mascle, C. (2007, June). Structure de données appliquée au cycle de vie du produit [Paper]. 7e Congrès international de génie industriel, Trois-Rivières, Québec. Unavailable
Riverin, J. L., & Pettigrew, M. J. (2007). Vibration Excitation Forces Due to Two-Phase Flow in Piping Elements. Journal of Pressure Vessel Technology, 129(1), 7-13. External link
Robitaille, M., Aubin, C.-É., & Labelle, H. (2007). Intra and Interobserver Variability of Preoperative Planning for Surgical Instrumentation in Adolescent Idiopathic Scoliosis. European Spine Journal, 16(10), 1604-1614. External link
Ross, A., & Ostiguy, G. (2007). Propagation of the Initial Transient Noise From an Impacted Plate. Journal of Sound and Vibration, 301(1-2), 28-42. External link
Roy, R., Chatelain, J.-F., Mayer, J. R. R., Chalut, S., & Engin, S. (2007, June). Réduction du temps d'usinage par optimisation des trajectoires de coupe, de type spirale [Paper]. 5th International Conference on Industrial Automation, Montréal, Québec. Unavailable
Ruban, T., Vu Viet, H., Thomas, M., Lakis, A. A., & Marcouiller, L. (2007). Conception des structures d'essais d'interaction fluide-structure. (Technical Report). Unavailable
Ruiz, E., & Trochu, F. (2007). Coupled non-conforming finite element and finite difference approximation based on laminate extrapolation to simulate liquid composite molding processes. Part II: non-isothermal Filling and Curing. Science and Engineering of Composite Materials, 14(2), 113-144. Available
Ruiz, E., Achim, V., & Trochu, F. (2007). Coupled non-conforming finite element and finite difference approximation based on laminate extrapolation to simulate liquid composite molding processes. Part I: isothermal flow. Science and Engineering of Composite Materials, 14(2), 85-112. Available
Ruiz, E., Ortega, I., Abdellaoui, C., & Trudeau, P. (2007, October). Nanosilica-modified carbon/epoxy composites manufacturing and characterization [Paper]. 4th International Symposium on Polymer Nanocomposites Science and Technology, Boucherville, Québec. Unavailable
Sabri, F., Trifu, O., & Paraschivoiu, I. (2007, June). In-flight ice accretion simulation in SLD conditions [Paper]. 25th AIAA Applied Aerodynamics Conference, Miami, FL, United States. External link
Safizadeh, M. S., Lakis, A. A., & Thomas, M. (2007, June). Machinery diagnosis by wavelet analysis [Paper]. 20th International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2007), Faro, Portugal. Unavailable
Saidane, K., Polizu, S., & Yahia, L. (2007). Accelerated fatigue behavior and mechano-physical characterizations of in vitro physiological simulation of nitinol stents. Journal of Applied Biomaterials & Biomechanics, 5(2), 117-124. External link
Sarwark, J., & Aubin, C.-É. (2007). Growth considerations of the immature spine. Journal of Bone and Joint Surgery, 89, 8-13. External link
Schmith, E., Parent, S., Moreau, A., Arwark, J., & Aubin, C.-É. (2007, September). A new vertebral epiphyseal device inducing vertebral growth modulation [Paper]. 42nd Annual Meeting Scoliosis Research Society, Edinburgh, Scotland. Unavailable
Shahriary, S. (2007). Fluid-elastic instability of a tube bundle in two-phase cross-flow using measured quasi-static forces [Master's thesis, École Polytechnique de Montréal]. Available
Sheriff, F. (2007). Génération de facteurs de réponse pour champs de puits géothermiques verticaux [Master's thesis, École Polytechnique de Montréal]. Available
Shirazi, R., & Shirazi-Adl, A. (2007, June). Deep vertical fibrils network influences mechanics of the articular cartilage [Paper]. CANCAM 2007, Toronto, Ontario. Unavailable
Shirazi-Adl, A., & Mesfar, W. (2007). Effect of Tibial Tubercle Elevation on Biomechanics of the Entire Knee Joint Under Muscle Loads. Clinical Biomechanics, 22(3), 344-351. External link
Shirazi-Adl, A., & Mesfar, W. (2007, February). Tubercle elevation affects biomechanics of the entire knee joint [Paper]. Transactions of the 53rd Orthopedic Research Society, San Diego, California. Unavailable
Slamani, M., Mayer, J. R. R., & Balazinski, M. (2007, June). Improving machine tool accuracy for high-speed orbital milling of holes [Paper]. CANCAM 2007, Toronto, Ontario. Unavailable
Sokolowski, W., Metcalfe, A., Hayashi, S., Yahia, L., & Raymond, J. (2007). Medical Applications of Shape Memory Polymers. Biomedical Materials, 2(1), S23-S27. External link
Soukane, D. M., Shirazi-Adl, A., & Urban, J. P. G. (2007). Computation of Coupled Diffusion of Oxygen, Glucose and Lactic Acid in an Intervertebral Disc. Journal of Biomechanics, 40(12), 2645-2654. External link
Sy, M. (2007). Intégration des caractéristiques de cycle de vie dans la phase de conception [Ph.D. thesis, École Polytechnique de Montréal]. Available
Sylvestre, P. L., Villemure, I., & Aubin, C.-É. (2007). Finite Element Modeling of the Growth Plate in a Detailed Spine Model. Medical & Biological Engineering & Computing, 45(10), 977-988. External link
Szczepanski, P., Klim, H. Z., & Balazinski, M. (2007, June). Diagnostic des systèmes par la méthode de l'élimination [Paper]. 7e Congrès international de génie industriel, Trois Rivières, Québec. Unavailable
Taheri, M. (2007). Bioconvection and thermo-bioconvection of gravitactic micro-organisms in enclosures [Master's thesis, École Polytechnique de Montréal]. Available
Taheri, M., & Bilgen, E. (2007). Bioconvection of Gravitactic Micro-Organisms in Rectangular Enclosures. International Journal of Heat and Mass Transfer, 50(23-24), 4652-4660. External link
Tam, S. K., de Vos, P., Hallé, J. P., & Yahia, L. (2007, April). The biocompatibility of microcapsule for cellular therapy : a closer look at the interface [Paper]. International Symposium on Polymeric Materials for Regenerative Medicine 2007, Boucherville, Québec. Unavailable
Tam, S. K., Dusseault, J., Hallé, J. P., & Yahia, L. (2007, September). Surface hydrophilicity as an indicator of microcapsule biocompatibility [Paper]. XVth International Workshop on Bioencapsulation, Vienna, Austria. External link
Tam, S. K., Hallé, J. P., & Yahia, L. (2007). La microencapsulation pour la thérapie cellulaire. In Vandamme, T., Poncelet, D., & Subra-Paternault, P. (eds.), Microencapsulation : des sciences aux technologies (pp. 149-174). External link
Tam, S. K., Yahia, L., Hallé, J. P., de Haan, B., Polizu, S., & de Vos, P. (2007, April). Surface characterization and investigation of protein adsorption for the optimization of microcapsule bioperformance [Paper]. Society of Biomaterials 2007 Annual Meeting, Chicago, Illinois. Unavailable
Tchernev, A. P. (2007). Modélisation et commande robuste d'hélicoptère [Master's thesis, École Polytechnique de Montréal]. Available
Therriault, D. (2007). Biosensors : Filling the gap. Nature Nanotechnology, 2(7), 393-394. External link
Therriault, D., White, S. R., & Lewis, J. A. (2007). Rheological behavior of fugitive organic inks for direct-write assembly. Applied Rheology, 17(1), 10112-10121. Available
Thomassin, J., Vo, H. D., & Mureithi, N. W. (2007, May). Blade Tip Clearance Flow and Compressor NSV: The Jet Core Feedback Theory as the Coupling Mechanism [Paper]. ASME Turbo Expo: Power for Land, Sea and Air (GT 2007), Montreal, Qc, Canada. External link
Toorani, M. H., & Lakis, A. A. (2007, May). Non-linear flow-induced vibrations in composite cylindrical shells [Paper]. 15th Annual Conference on Mechanical Engineering (ISME 2007), Tehran, Iran. Unavailable
Turgeon, E., Pelletier, D., Borggaard, J., & Étienne, S. (2007). Application of a Sensitivity Equation Method to the K-Epsilon Model of Turbulence. Optimization and Engineering, 8(4), 341-372. External link
Valipour Jahanpisheh, H. (2007). An optimal post-processing module for five-axis CNC milling machines [Master's thesis, École Polytechnique de Montréal]. Available
Valipour, H., & Baron, L. (2007, June). The orthogonal decomposition method in the post-processing of redundant machining operations [Paper]. 5th International Conference on Industrial Automation, Montréal, Québec. External link
Verdier, M. (2007). Méthodes numériques pour le calcul de l'écoulement dans l'artère carotide [Master's thesis, École Polytechnique de Montréal]. Available
Verreman, Y., & Guo, H. (2007). High-Cycle Fatigue Mechanisms in 1045 Steel Under Non-Proportional Axial-Torsional Loading. Fatigue & Fracture of Engineering Materials & Structures, 30(10), 932-946. External link
Vidal, D., Bertrand, F., & Roy, R. (2007, September). Development of an efficient lattice Boltzmann method for simulating fluid flow in porous media [Paper]. Trends in Numerical and Physical Modeling for Industrial Multiphase Flows, Cargese, France. Unavailable
Villemure, I., Cloutier, L., Matyas, J. R., & Duncan, N. A. (2007). Non-Uniform Strain Distribution Within Rat Cartilaginous Growth Plate Under Uniaxial Compression. Journal of Biomechanics, 40(1), 149-156. External link
Vo, H. D. (2007). Active suppression of rotating stall inception with distributed jet actuation. International Journal of Rotating Machinery, 2007, 1-16. Available
Vo, H. D. (2007, June). Control of rotating stall in axial compressors using plasma actuators [Paper]. 37th AIAA Fluid Dynamics Conference, Miami, FL, United States. External link
Vo, H. D. (2007, May). Suppression of short length-scale rotating stall inception with glow discharge actuation [Paper]. ASME Turbo Expo, Montréal, Québec. External link
Vu, V. H., Thomas, M., & Lakis, A. A. (2007, April). Le pont est-il fort? Réponse d'une technique d'analyse modale opérationnelle [Paper]. 42e Congrès de l'AQTR, défi transport durable, Montréal, Québec (17 pages). Unavailable
Vu, V. H., Thomas, M., Lakis, A. A., & Marcouiller, L. (2007, October). Effects of added mass on submerged vibrating structures [Paper]. 25th Seminar on Machinery Vibration (CMVA 2007), St. John, New Brunswick (9 pages). External link
Vu, V. H., Thomas, M., Lakis, A. A., & Marcouiller, L. (2007, April). Identification of modal parameters by operational modal analysis for the assessment of bridge rehabilitation [Paper]. 2nd International Operational Modal Analysis Conference (IOMAC 2007), Copenhagen, Danemark. External link
Vu, V. H., Thomas, M., Lakis, A. A., & Marcouiller, L. (2007, October). Multi-regressive model for structural output only modal analysis [Paper]. 25th Seminar on Machinery Vibration (CMVA 2007), St. John, New Brunswick. External link
Vu, V. H., Thomas, M., Lakis, A. A., & Marcouiller, L. (2007, December). A time domain method for modal identification of vibratory signals [Paper]. 1er Congrès international sur l'ingénierie des risques industriels (CIRI 2007), Montréal, Québec. Unavailable
Waffo Moko, F. G. (2007). Développement d'un logiciel de caractérisation thermochimique de résines thermodurcissables [Master's thesis, École Polytechnique de Montréal]. Available
Walch, D. (2007). Intégration et optimisation multidisciplinaire d'une turbomachine au stade préliminaire de conception [Master's thesis, École Polytechnique de Montréal]. Available
Walch, D., Trépanier, J.-Y., Tribes, C., & Turcotte, J. (2007, May). A variable selection based on sensitivity analysis for MDO [Paper]. ASME Gas Turbine Technical Congress & Exposition (GT 2007), Montréal, Québec (9 pages). Unavailable
Wang, Y. L. (2007). Automatic hybrid grid generation [Ph.D. thesis, École Polytechnique de Montréal]. Available
Woźniak, A., & Mayer, J. R. R. (2007, September). Micro-features measurement using meso-volume CMM [Paper]. 7th International Symposium on Mechatronics, Warsaw, Poland. External link
Wozniak, A., Balazinski, M., & Mayer, J. R. R. (2007, June). Application of fuzzy knowledge base for corrected measured point determination in coordinate metrology [Paper]. Annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2007), San Diego, CA, United States. External link
Wozniak, A., Mayer, J. R. R., Balazinski, M., & Côté, M. (2007, August). Pomiary ksztaltu ostrzy narzedzi skrawajacych przy pomocy wspolrzednosciowych maszyn pomiarowych [Paper]. Metrologia w technikach wytwarzania, XII Krajowa III Miedzynarodowa Konferencja Naukowo Techniczna, Poland. Unavailable
Yahiaoui, M. A., Bahloul, A., Vasseur, P., & Robillard, L. (2007). Natural Convection of a Binary Mixture in a Vertical Closed Annulus. Chemical Engineering Communications, 194(7), 924-937. External link
Yang, J. (2007). Integrated numerical methods for optimization of gear trains [Master's thesis, École Polytechnique de Montréal]. Available
Yu, D. X. (2007). Laser machining of cutting tool materials [Master's thesis, École Polytechnique de Montréal]. Available
Yu, J. (2007). Microscale thermofluidic modeling of LCVD fiber growth [Ph.D. thesis, École Polytechnique de Montréal]. Available
Zargarbashi, S. H. H., & Mayer, J. R. R. (2007, June). A predictive maintenance method for rotary axes of five-axis machine tools [Paper]. CANCAM 2007, Toronto, Ontario. Unavailable
Zebdi, O. (2007). Conception, analyse et caractérisation des propriétés mécaniques de ressorts composites à renfort tressé [Ph.D. thesis, École Polytechnique de Montréal]. Available
Zhang, C. (2007). Correlation between vibration excitation forces and the dynamic characteristics of two-phase flow in a rotated triangular tube bundle [Ph.D. thesis, École Polytechnique de Montréal]. Available
Zhang, C. (2007). Étude de l'effet des paramètres de fabrication sur le gauchissement des éprouvettes moulées par injection [Master's thesis, École Polytechnique de Montréal]. Available
Zhang, C., Pettigrew, M. J., & Mureithi, N. W. (2007, July). Development of Models Correlating Vibration Excitation Forces to Dynamic Characteristics of Two-Phase Flow in a Tube Bundle [Paper]. ASME Pressure Vessels and Piping Conference (PVP 2007), San Antonio, Texas. External link
Zhang, C., Pettigrew, M. J., & Mureithi, N. W. (2007). Vibration Excitation Force Measurements in a Rotated Triangular Tube Bundle Subjected to Two-Phase Cross Flow. Journal of Pressure Vessel Technology, 129(1), 21-27. External link
Zhang, L., Shi, P., & Boukas, E.-K. (2007). H-Infinity Output-Feedback Control for Switched Linear Discrete-Time Systems With Time-Varying Delays. International Journal of Control, 80(8), 1354-1365. External link
Zhang, L., Shi, P., Boukas, E.-K., & Wang, C. (2007). Robust I-2-I-Infinity Filtering for Switched Linear Discrete Time-Delay Systems With Polytopic Uncertainties. IET Control Theory and Applications, 1(3), 722-730. External link
Zoabli, G., Mathieu, P. A., & Aubin, C.-É. (2007). Back muscles biometry in adolescent idiopathic scoliosis. Spine Journal, 7(3), 338-344. External link