<  Retour au portail Polytechnique Montréal

Documents dont l'auteur est "Ajji, Abdellah"

Monter d'un niveau
Pour citer ou exporter [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Grouper par: Auteurs ou autrices | Date de publication | Sous-type de document | Aucun groupement
Aller à : 2024 | 2023 | 2022 | 2021 | 2020 | 2019 | 2018 | 2017 | 2016 | 2015 | 2014 | 2013 | 2012 | 2011 | 2010 | 2009 | 2008 | 2007 | 2006 | 2005 | 2002
Nombre de documents: 276

2024

Heli, B., Younes, G. R., Arguindeguy, K., & Ajji, A. (2024). Synthesis and Characterization of Antimicrobial Bacterial Cellulose Crosslinked with Branched Polyethylenimine. Carbohydrate Polymer Technologies and Applications, 7, 100457 (9 pages). Disponible

Mousavi, A., Hedayatnia, A., van Vliet, P. P., Dartora, D. R., Wong, N., Rafatian, N., Nuyt, A. M., Moraes, C., Ajji, A., Andelfinger, G., & Savoji, H. (2024). Development of photocrosslinkable bioinks with improved electromechanical properties for 3D bioprinting of cardiac BioRings. Applied Materials Today, 36, 102035 (19 pages). Lien externe

Adrar, S., & Ajji, A. (2024). Effect of blending sequence and epoxy functionalized compatibilizer on barrier and mechanical properties of PBS and PBS/PLA nanocomposite blown films. Journal of Vinyl and Additive Technology, 12 pages. Lien externe

2023

Adrar, S., & Ajji, A. (2023). Interactions between PLA, organo-montmorillonite and plasticizer: Synergistic effect on the barrier and mechanical properties of PLA nanocomposites blown films. Journal of Applied Polymer Science, 54867 (16 pages). Disponible

Mohseni Garakani, M., Cooke, M. E., Weber, M. H., Wertheimer, M. R., Ajji, A., & Rosenzweig, D. H. (2023). A 3D, Compartmental Tumor-Stromal Microenvironment Model of Patient-Derived Bone Metastasis. International Journal of Molecular Sciences, 24(1), 160 (22 pages). Lien externe

Heli, B., El-Rifai, S., Ajji, A., & Heuzey, M.-C. (2023). Characterization of heat-treated chitosan cast films and their antimicrobial activity on the growth of natural flora of pasteurized milk. International Journal of Biological Macromolecules, 232, 123446 (9 pages). Lien externe

Wang, C., & Ajji, A. (2023). Development and application of low-density polyethylene-based multilayer film incorporating potassium permanganate and pumice for avocado preservation. Food Chemistry, 401, 134162 (8 pages). Lien externe

Xu, Y., Ajji, A., & Heuzey, M.-C. (2023). Fast thermal responsive hydrogels consisting of electrospun fibers with highly tunable conductivity. Sensors and Actuators A: Physical, 349, 6 pages. Lien externe

Gallah, H., Mighri, F., Ajji, A., & Bandyopadhyay, J. (2023). Flexible PET/(PET-TiO2) core/shell nanofibrous mats as potential photoanode layer for dye-sensitized solar cells, DSSCs. Materials Chemistry and Physics, 305, 127911 (24 pages). Lien externe

Jafari, A., Niknezhad, S. V., Kaviani, M., Saleh, W., Wong, N., Van Vliet, P. P., Moraes, C., Ajji, A., Kadem, L., Azarpira, N., Andelfinger, G., & Savoji, H. (2023). Formulation and Evaluation of PVA/Gelatin/Carrageenan Inks for 3D Printing and Development of Tissue-Engineered Heart Valves. Advanced Functional Materials, 18 pages. Lien externe

Ajji, A., Jalali Dil, E., Saffar, A., & Kanani Aghkand, Z. (2023). Heat Sealing in Packaging. Lien externe

Abourich, M., Novara, L., Ajji, A., & Claveau-Mallet, D. (2023). Microfibres issues du lavage de vêtements - une initiative citoyenne de réduction à la source. Vecteur Environnement, 56, 6-6. Non disponible

Ajji, A., Chaouki, J., Esen, O., Grmela, M., Klika, V., & Pavelka, M. (2023). On geometry of multiscale mass action law and its fluctuations. Physica D-Nonlinear Phenomena, 445, 133642 (22 pages). Lien externe

Watson, S., Pattyn, C., Mohseni Garakani, M., Ajji, A., Reuter, S., & Wertheimer, M. R. (2023). Wetting and aging behaviors for several O2 and NH3 plasma treated nanofibrous and flat film polymer materials: A comparison. Plasma Processes and Polymers, 20(6), e2200224 (14 pages). Lien externe

2022

Sharafi Zamir, S., Fathi, B., Ajji, A., Robert, M., & Elkoun, S. (2022). Biodegradation of modified starch/poly lactic acid nanocomposite in soil. Polymer Degradation and Stability, 199, 9 pages. Lien externe

Zamir, S. S., Fathi, B., Ajji, A., Robert, M., & Elkoun, S. (2022). Crystallinity and gas permeability of Poly (Lactic Acid)/Starch nanocrystal nanocomposite. Polymers, 14(14), 2802 (14 pages). Lien externe

Wang, C., & Ajji, A. (2022). Development of a novel ethylene scavenger made up of pumice and potassium permanganate and its effect on preservation quality of avocados. Journal of Food Engineering, 330, 8 pages. Lien externe

Kordjazi, Z., & Ajji, A. (2022). Development of TiO2 photocatalyzed EC/HTPB based oxygen scavenging mats by electrospinning method for packaging applications. Food Packaging and Shelf Life, 31, 100801 (9 pages). Lien externe

Adrar, S., & Ajji, A. (2022). Effect of different type of organomontmorillonites on oxygen permeability of PLA-based nanocomposites blown films. Polymer Engineering & Science, 62(11), 3796-3808. Lien externe

Junior, J. C. F., Moghimian, N., Gutiérrez, G., Helal, E., Ajji, A., de Oliveira Barra, G. M., & Demarquette, N. R. (2022). Effects of an industrial graphene grade and surface finishing on water and oxygen permeability, electrical conductivity, and mechanical properties of high-density polyethylene (HDPE) multilayered cast films. Materials Today Communications, 31, 8 pages. Lien externe

Wang, C., & Ajji, A. (2022). Ethylene scavenging film based on low-density polyethylene incorporating pumice and potassium permanganate and its application to preserve avocados. LWT-Food Science and Technology, 172, 114200 (11 pages). Lien externe

Zhuang, Y., Saadatkhah, N., Morgani, M. S., Xu, T., Martin, C., Patience, G. S., & Ajji, A. (2022). Experimental methods in chemical engineering: Reactive extrusion. Canadian Journal of Chemical Engineering, 101(1), 59-77. Lien externe

Bellamy, A., Ajji, A., Comeau, Y., & Claveau-Mallet, D. (novembre 2022). Identifier et quantifier pour mieux traiter les microplastiques dans l'eau, vers un suivi routier par les municipalités [Communication écrite]. Symposium sur la gestion de l'eau, Trois-Rivières, Qc, Canada. Non disponible

Bellamy, A., Abourich, M., Ajji, A., & Claveau-Mallet, D. (mars 2022). Microplastiques, enquête sur la horde qui envahit nos milieux aquatiques : identification, quantification et réduction à la source [Présentation]. Dans Journée québécoise étudiante CentrEau (JQEC 2022). Non disponible

Fortin, W., Bouchet, M., Therasse, E., Maire, M., Heon, H., Ajji, A., Soulez, G., & Lerouge, S. (2022). Negative In Vivo Results Despite Promising In Vitro Data With a Coated Compliant Electrospun Polyurethane Vascular Graft. Journal of Surgical Research, 279, 491-504. Lien externe

Mohseni Garakani, M., Ahangar, P., Watson, S., Nisol, B., Wertheimer, M. R., Rosenzweig, D. H., & Ajji, A. (2022). A novel 3D co-culture platform for integrating tissue interfaces for tumor growth, migration and therapeutic sensitivity: "PP-3D-S". Materials Science and Engineering C, 134, 13 pages. Lien externe

Mohseni Garakani, M., Cooke, M. E., Wertheimer, M. R., Rosenzweig, D. H., & Ajji, A. (2022). A novel 3D in vitro tissue model for bone-metastasized breast cancer: A preclinical tool in drug discovery and testing. Plasma Processes and Polymers, 19(7), 15 pages. Lien externe

Kordjazi, Z., & Ajji, A. (2022). Oxygen scavenging systems for food packaging applications: A review. Canadian Journal of Chemical Engineering, 100(12), 3444-3449. Lien externe

Zamir, S. S., Fathi, B., Ajji, A., Robert, M., & Elkoun, S. (2022). Phase transition and crystallization behavior of grafted starch nanocrystals in PLA nanocomposites. Express Polymer Letters, 16(12), 1253-1266. Lien externe

Moslehi, A., Ajji, A., Heuzey, M.-C., Rahimizadeh, A., & Lessard, L. (2022). Polylactic acid/recycled wind turbine glass fiber composites with enhanced mechanical properties and toughness. Journal of Applied Polymer Science, 139(15), e51934 (12 pages). Lien externe

Azizipour, N., Avazpour, R., Sawan, M., Ajji, A., & Rosenzweig, D. H. (2022). Surface Optimization and Design Adaptation toward Spheroid Formation On-Chip. Sensors, 22(9), 3191 (14 pages). Lien externe

Darvish, M., & Ajji, A. (2022). Synergistic Antimicrobial Activities of Limonene with Mineral Carriers in LDPE Films for Active Packaging Application. Science Journal of Chemistry, 10(2), 32. Lien externe

Xu, Y., Ajji, A., & Heuzey, M.-C. (2022). Tunable two-step shape and dimensional changes with temperature of a PNIPAM/CNC hydrogel. Soft Matter, 18(23), 4437-4444. Lien externe

Azizipour, N., Avazpour, R., Weber, M. H., Sawan, M., Ajji, A., & Rosenzweig, D. H. (2022). Uniform Tumor Spheroids on Surface-Optimized Microfluidic Biochips for Reproducible Drug Screening and Personalized Medicine. Micromachines, 13(4), 16 pages. Lien externe

Azizipour, N., Avazpour, R., Sawan, M., Rosenzweig, D. H., & Ajji, A. (2022). Uniformity of spheroids-on-a-chip by surface treatment of PDMS microfluidic platforms. Sensors & Diagnostics, 1(4), 750-764. Disponible

2021

Heli, B., & Ajji, A. (juillet 2021). The application of the plasmonic nanopaper in the optical-based sensing approaches [Communication écrite]. 21st IEEE International Conference on Nanotechnology (NANO 2021), Montreal, Québec, Canada (1 page). Lien externe

Bouchet, M., Ajji, A., & Lerouge, S. (2021). Determination of the Adhesion Between Electrospun Mats through Peel tests. Fibers and Polymers, 22(5), 1266-1273. Lien externe

Kordjazi, Z., & Ajji, A. (2021). Development of TiO2 catalyzed HTPB based oxygen scavenging films for food packaging applications. Food Control, 121, 107639 (6 pages). Lien externe

Kanani Aghkand, Z., Saffar, A., & Ajji, A. (2021). Effect of Back-layer on seal performance of multilayer polyethylene-based sealant films. Journal of Applied Polymer Science, 138(31), 12 pages. Lien externe

Darvish, M., & Ajji, A. (2021). Effect of Polyethylene Film Thickness on the Antimicrobial Activity of Embedded Zinc Oxide Nanoparticles. ACS Omega, 6(40), 26201-26209. Lien externe

Salehi Morgani, M., Jalali Dil, E., & Ajji, A. (2021). Effect of processing condition and antioxidants on visual properties of multilayer post-consumer recycled high density polyethylene films. Waste Management, 126, 239-246. Lien externe

Wang, L., Jalali Dil, E., & Ajji, A. (2021). Effect of Uniaxial Stretching on Molecular Orientation, Crystallinity and Oxygen Permeability of Ethylene Vinyl Alcohol. International Polymer Processing, 36(3), 314-321. Lien externe

Roso, M., Cerclé, C., Patience, G. S., & Ajji, A. (2021). Experimental Methods in Chemical Engineering: Barrier properties. Canadian Journal of Chemical Engineering, 99(5), 1068-1081. Lien externe

Abdoltajedini, F., Hadjizadeh, A., & Ajji, A. (2021). Fabrication and characterization of polymeric nano/micro fibers containing silver nanoparticles for biomedical applications. International Journal of Polymeric Materials and Polymeric Biomaterials, 72(2), 144-161. Lien externe

Mohammadi, R. S., Zolali, A. M., Tabatabaei, S. H., & Ajji, A. (2021). Interfacial localization of organoclay enhances the peelability of polyethylene/polybutene-1/organoclay nanocomposite films. Composites Part B: Engineering, 218, 9 pages. Lien externe

Rosid, S. M., Ajji, A., Hasbullah, H., Rosid, S. J. M., Ismail, A. F., & Goh, P. S. (2021). Physicochemical characteristics of polysulfone nanofiber membranes with iron oxide nanoparticles via electrospinning. Journal of Applied Polymer Science, 139(8), 10 pages. Lien externe

Kanani Aghkand, Z., & Ajji, A. (2021). Squeeze flow in multilayer polymeric films: Effect of material characteristics and process conditions. Journal of Applied Polymer Science, 139(13), 51852 (14 pages). Lien externe

2020

Azizipour, N., Avazpour, R., Rosenzweig, D. H., Sawan, M., & Ajji, A. (2020). Evolution of biochip technology : a review from lab-on-a-chip to organ-on-a-chip. Micromachines, 11(6), 599 (33 pages). Disponible

Gallah, H., Mighri, F., Ajji, A., & Bandyopadhyay, J. (2020). Flexible electrospun PET/TiO2 nanofibrous structures: Morphology, thermal and mechanical properties. Polymers for Advanced Technologies, 31(7), 1612-1623. Lien externe

Mohammadi, R. S., Zolali, A. M., Tabatabaei, S. H., & Ajji, A. (2020). Nanoconfinement Induced Direct Formation of Form i and III Crystals inside in Situ Formed Poly(butene-1) Nanofibrils. Macromolecules, 53(4), 1346-1355. Lien externe

Kordjazi, Z., & Ajji, A. (2020). Partially miscible polymer blends of ethyl cellulose and hydroxyl terminated polybutadiene. Polymer, 211, 123067 (7 pages). Lien externe

Ajji, A., & Heli, B. (2020). Solid Phase Immunoassay Apparatus and Method for Rapid Detection of Bacteria. (Demande de brevet no US20200103404). Lien externe

Heli, B., & Ajji, A. (2020). Toward a nanopaper-based and solid phase immunoassay using FRET for the rapid detection of bacteria. Scientific Reports, 10(1), 11 pages. Lien externe

2019

Ben Dhieb, F., Jalali Dil, E., Tabatabaei, S. H., Mighri, F., & Ajji, A. (2019). Effect of nanoclay orientation on oxygen barrier properties of LbL nanocomposite coated films. RSC Advances, 9(3), 1632-1641. Disponible

Abdali, H., Heli, B., & Ajji, A. (2019). Cellulose nanopaper cross-linked amino graphene/polyaniline sensors to detect CO₂ gas at room temperature. Sensors, 19(23), 10 pages. Lien externe

Zamir, S. S., Frouzanmehr, M. R., Nagalakshmaiah, M., Ajji, A., Robert, M., & Elkoun, S. (2019). Chemical compatibility of lactic acid-grafted starch nanocrystals (SNCs) with polylactic acid (PLA). Polymer Bulletin, 76(7), 3481-3499. Lien externe

Ben Dhieb, F., Tabatabaei, S. H., Mighri, F., & Ajji, A. (2019). Comparison of Crosslinking Efficiency in Dip and Roll-Deposited Coatings on Their Oxygen Barrier. ACS Omega, 4(14), 15772-15779. Lien externe

Jahan, N., Mighri, F., Rodrigue, D., & Ajji, A. (2019). Effect of the inflation strategy on the piezoelectric response of cellular poly(vinylidene fluoride) ferroelectret. Journal of Applied Polymer Science, 136(20), 8 pages. Lien externe

Ben Dhieb, F., Jalali Dil, E., Tabatabaei, S. H., Mighri, F., & Ajji, A. (2019). Erratum: Effect of nanoclay orientation on oxygen barrier properties of LbL nanocomposite coated films (vol 9, pg 1632, 2019). RSC Advances, 9(39), 22676-22676. Lien externe

Di Mauro, E., Camaggi, M., Vandooren, N., Bayard, C., De Angelis, J., Pezzella, A., Baloukas, B., Silverwood, R., Ajji, A., Pellerin, C., & Santato, C. (2019). Eumelanin for nature-inspired UV-absorption enhancement of plastics. Polymer International, 68(5), 984-991. Lien externe

Gallah, H., Mighri, F., Ajji, A., & Bandyopadhyay, J. (mai 2019). Flexible Electrospun PET/TiO₂ Nanofibrous Structures for Dye-Sensitized Solar Cell (DSSC) Photoanodes [Communication écrite]. 35th International Conference of the Polymer-Processing-Society (PPS 2019), Turkey. Lien externe

Abdali, H., & Ajji, A. (2019). Functionalized Graphene/Polymer Nanofiber Composites and Their Functional Applications. Dans Khan, A., Jawaid, M., Neppolian, B., & Asiri, A. M. (édit.), Graphene Functionalization Strategies: From Synthesis to Applications (127-156). Lien externe

Rokbani, H., Daigle, F., & Ajji, A. (2019). Long- and short-term antibacterial properties of low-density polyethylene-based films coated with zinc oxide nanoparticles for potential use in food packaging. Journal of Plastic Film and Sheeting, 35(2), 117-134. Lien externe

Jalali Dil, E., Ben Dhieb, F., & Ajji, A. (2019). Modeling the effect of nanoplatelets orientation on gas permeability of polymer nanocomposites. Polymer, 168, 126-130. Lien externe

Gaikwad, K. K., Singh, S., & Ajji, A. (2019). Moisture absorbers for food packaging applications. Environmental Chemistry Letters, 17(2), 609-628. Lien externe

Xu, Y., Ajji, A., & Heuzey, M.-C. (2019). Response behaviors and mechanical strength of thermal responsive hydrogels fabricated by electrospinning. Polymer, 183, 8 pages. Lien externe

Abdali, H., Heli, B., & Ajji, A. (2019). Stable and sensitive amino-functionalized graphene/polyaniline nanofiber composites for room-temperature carbon dioxide sensing. RSC Advances, 9(70), 41240-41247. Lien externe

Dhieb, F. B., García, A. C., Tabatabaei, S. H., Mighri, F., & Ajji, A. (2019). Study of the Crosslinking of PVA with Glyoxal in LbL Nanocomposites. Open Journal of Polymer Chemistry, 09(04), 100-116. Lien externe

Jahan, N., Mighri, F., Rodrigue, D., & Ajji, A. (2019). Thermally stable cellular poly(vinylidene) ferroelectrets: Optimization of CO₂ driven inflation process. Journal of Applied Polymer Science, 136(40), 47929 (9 pages). Lien externe

Bouchet, M., Gauthier, M., Maire, M., Ajji, A., & Lerouge, S. (2019). Towards compliant small-diameter vascular grafts: Predictive analytical model and experiments. Materials Science and Engineering: C, 100, 715-723. Lien externe

2018

Rokbani, H., Daigle, F., & Ajji, A. (2018). Combined effect of ultrasound stimulations and autoclaving on the enhancement of antibacterial activity of ZnO and SiO₂/ZnO nanoparticles. Nanomaterials, 8(3). Disponible

Castejon, P., Habibi, K., Saffar, A., Ajji, A., Martinez, A. B., & Arencon, D. (2018). Polypropylene-based porous membranes: Influence of polymer composition, extrusion draw ratio and uniaxial strain. Polymers, 10(1). Disponible

Audet, E., Mighri, F., Rodrigue, D., & Ajji, A. (2018). Cellular morphology optimization of polypropylene/CaCO₃ composite films designed for piezoelectric applications. Cellular Polymers, 37(3), 103-119. Lien externe

Mohebbi, A., Mighri, F., Ajji, A., & Rodrigue, D. (2018). Cellular Polymer Ferroelectret: A Review on Their Development and Their Piezoelectric Properties. Advances in Polymer Technology, 37(2), 468-483. Lien externe

Ardila, N., Ajji, Z., Heuzey, M.-C., & Ajji, A. (2018). Chitosan electrospraying: Mapping of process stability and micro and nanoparticle formation. Journal of Aerosol Science, 126, 85-98. Lien externe

Arkoun, M., Daigle, F., Holley, R. A., Heuzey, M.-C., & Ajji, A. (2018). Chitosan-based nanofibers as bioactive meat packaging materials. Packaging Technology and Science, 31(4), 185-195. Lien externe

Arkoun, M., Ardila, N., Heuzey, M.-C., & Ajji, A. (2018). Chitosan-based structures/coatings with antibacterial properties. Dans Handbook of antimicrobial coatings (357-389). Lien externe

Mohammadi, R. S., Tabatabaei, S. H., & Ajji, A. (2018). Effect of nanoclay localization on the peel performance of PE based blend nanocomposite sealants. Applied Clay Science, 152, 113-123. Lien externe

Boutrouka, R., Tabatabaei, S. H., & Ajji, A. (2018). Enhancement of heat seal properties of polypropylene films by elastomer incorporation. International Polymer Processing, 33(3), 322-326. Lien externe

Mohammadi, R. S., Tabatabaei, S. H., & Ajji, A. (2018). Peelable clay/PE nanocomposite seals with ultra-wide peelable heat seal temperature window. Applied Clay Science, 158, 132-142. Lien externe

Rokbani, H., & Ajji, A. (2018). Rheological properties of poly(lactic acid) solutions added with metal oxide nanoparticles for electrospinning. Journal of Polymers and the Environment, 26(6), 2555-2565. Lien externe

Kanani Aghkand, Z., Jalali Dil, E., Ajji, A., & Dubois, C. (2018). Simulation of Heat Transfer in Heat Sealing of Multilayer Polymeric Films: Effect of Process Parameters and Material Properties. Industrial & Engineering Chemistry Research, 57(43), 14571-14582. Lien externe

Jalali Dil, E., Kim, S. C., Saffar, A., Ajji, A., Zare, R. N., Sattayapiwat, A., Esguerra, V., & Bowen, R. A. R. (2018). Surface characterization and free thyroid hormones response of chemically modified poly(ethylene terephthalate) blood collection tubes. Applied Surface Science, 442, 602-612. Lien externe

Rouabhia, M., Mighri, N., Mao, J., Park, H. J., Mighri, F., Ajji, A., & Zhang, Z. (2018). Surface treatment with amino acids of porous collagen based scaffolds to improve cell adhesion and proliferation. Canadian Journal of Chemical Engineering, 96(10), 2236-2242. Lien externe

Adrar, S., Habi, A., Ajji, A., & Grohens, Y. (2018). Synergistic effects in epoxy functionalized graphene and modified organo-montmorillonite PLA/PBAT blends. Applied Clay Science, 157, 65-75. Lien externe

Jahan, N., Mighri, F., Rodrigue, D., & Ajji, A. (2018). Synergistic improvement of piezoelectric properties of PVDF/ CaCO3/montmorillonite hybrid nanocomposites. Applied Clay Science, 152, 93-100. Lien externe

2017

Abdali, H., & Ajji, A. (2017). Preparation of electrospun nanocomposite nanofibers of polyaniline/poly(methyl methacrylate) with amino-functionalized graphene. Polymers, 9(9). Disponible

Arkoun, M., Daigle, F., Heuzey, M.-C., & Ajji, A. (2017). Antibacterial electrospun chitosan-based nanofibers: A bacterial membrane perforator. Food Science & Nutrition, 5(4), 865-874. Disponible

Arkoun, M., Daigle, F., Heuzey, M.-C., & Ajji, A. (2017). Mechanism of action of electrospun chitosan-based nanofibers against meat spoilage and pathogenic bacteria. Molecules, 22(4). Disponible

Wang, S., Ajji, A., Guo, S., & Xiong, C. (2017). Preparation of microporous polypropylene/titanium dioxide composite membranes with enhanced electrolyte uptake capability via melt extruding and stretching. Polymers, 9(3), 110. Disponible

Ardila, N., Daigle, F., Heuzey, M.-C., & Ajji, A. (2017). Antibacterial activity of neat chitosan powder and flakes. Molecules, 22(1), 1-19. Disponible

Adrar, S., Habi, A., Ajji, A., & Grohens, Y. (2017). Combined effect of epoxy functionalized graphene and organomontmorillonites on the morphology, rheological and thermal properties of poly (butylenes adipate-co-terephtalate) with or without a compatibilizer. Applied Clay Science, 146, 306-315. Lien externe

Savoji, H., Maire, M., Lequoy, P., Liberelle, B., De Crescenzo, G., Ajji, A., Wertheimer, M. R., & Lerouge, S. (2017). Correction to “Combining Electrospun Fiber Mats and Bioactive Coatings for Vascular Graft Prostheses”. Biomacromolecules, 18(2), 647-647. Lien externe

Ardila, N., Daigle, F., Heuzey, M.-C., & Ajji, A. (2017). Effect of Chitosan Physical Form on Its Antibacterial Activity Against Pathogenic Bacteria. Journal of Food Science, 82(3), 679-686. Lien externe

Mohebbi, A., Mighri, F., Ajji, A., & Rodrigue, D. (2017). Effect of Processing Conditions on the Cellular Morphology of Polypropylene Foamed Films for Piezoelectric Applications. Cellular Polymers, 36(1), 13-34. Lien externe

Jahan, N., Mighri, F., Rodrigue, D., & Ajji, A. (2017). Enhanced electroactive β phase in three phase PVDF/CaCO₃/nanoclay composites: Effect of micro-CaCO₃ and uniaxial stretching. Journal of Applied Polymer Science, 134(24), 11 pages. Lien externe

Tighzert, W., Habi, A., Ajji, A., Sadoun, T., & Daoud, F. B.-O. (2017). Fabrication and characterization of nanofibers based on poly(lactic acid)/chitosan blends by electrospinning and their functionalization with phospholipase A1. Fibers and Polymers, 18(3), 514-524. Lien externe

Moayeri, A., & Ajji, A. (2017). High capacitance carbon nanofibers from poly(acrylonitrile) and poly(vinylpyrrolidone)-functionalized graphene by electrospinning. Journal of Nanoscience and Nanotechnology, 17(3), 1820-1829. Lien externe

Bourg, V., Tsou, A., & Ajji, A. (mai 2017). Orientation of poly(ethylene terephthalate) in incompatible blends with an elastomer: Influence of functionalization [Communication écrite]. 75th Annual Technical Conference and Exhibition of the Society of Plastics Engineers (SPE ANTEC 2017), Anaheim, CA. Non disponible

Shahverdi-Shahraki, K., Ajji, A., Carreau, P., Ghosh, T., & Mahajan, K. (2017). PET nanocomposite materials and containers prepared therefrom. (Brevet no US9676926). Lien externe

Savoji, H., Boespflug, G., Maire, M., Ajji, A., Lerouge, S., & Wertheimer, M. R. (juillet 2017). Plasma Processes for Innovative Vascular Prostheses Combining 3D Electrospun Nanofiber Matrices and Bioactive Coatings [Communication écrite]. 23rd International Symposium on Plasma Chemistry (ISPC 2017), Montréal, QC, Canada. Lien externe

Mohebbi, A., Mighri, F., Ajji, A., & Rodrigue, D. (2017). Polymer ferroelectret based on polypropylene foam: piezoelectric properties improvement using post-processing thermomechanical treatment. Journal of Applied Polymer Science, 134(10). Lien externe

Mohebbi, A., Mighri, F., Ajji, A., & Rodrigue, D. (2017). Polymer ferroelectret based on polypropylene foam: piezoelectric properties prediction using dynamic mechanical analysis. Polymers for Advanced Technologies, 28(4), 476-483. Lien externe

Najarzadeh, Z., & Ajji, A. (2017). Role of molecular architecture in interfacial self-adhesion of polyethylene films. Journal of Plastic Film & Sheeting, 33(3), 235-261. Lien externe

Tabasi, R. Y., & Ajji, A. (2017). Tailoring heat-seal properties of biodegradable polymers through melt blending. International Polymer Processing, 32(5), 606-613. Lien externe

2016

Haddad, T., Noël, S., Liberelle, B., El Ayoubi, R., Ajji, A., & De Crescenzo, G. (2016). Fabrication and surface modification of poly lactic acid (PLA) scaffolds with epidermal growth factor for neural tissue engineering. Biomatter, 6(1). Disponible

Ardila, N., Medina, N., Arkoun, M., Heuzey, M.-C., Ajji, A., & Panchal, C. J. (2016). Chitosan-bacterial nanocellulose nanofibrous structures for potential wound dressing applications. Cellulose, 23(5), 3089-3104. Lien externe

Savoji, H., Maire, M., Lequoy, P., Liberelle, B., De Crescenzo, G., Wertheimer, M. R., Ajji, A., & Lerouge, S. (mai 2016). Chondroitin sulfate-oriented epidermal growth factor (EGF) coating for random and aligned electrospun vascular grafts [Affiche]. 10th World Biomaterials Congress (WBC 2016), Montréal, Canada. Publié dans Frontiers in Bioengineering and Biotechnology, 4. Disponible

Savoji, H., Maire, M., Lequoy, P., Liberelle, B., De Crescenzo, G., Ajji, A., Wertheimer, M. R., & Lerouge, S. (2016). Combining electrospun fiber mats and bioactive coatings for vascular graft prostheses. Biomacromolecules, 18(1), 303-310. Lien externe

Moayeri, A., & Ajji, A. (2016). Core-Shell Structured Graphene Filled Polyaniline/Poly(methyl methacrylate) Nanofibers by Coaxial Electrospinning. Nanoscience and Nanotechnology Letters, 8(2), 129-134. Lien externe

Hadjizadeh, A., Savoji, H., & Ajji, A. (2016). A Facile Approach for the Mass Production of Submicro/Micro Poly (Lactic Acid) Fibrous Mats and Their Cytotoxicity Test towards Neural Stem Cells. BioMed Research International, 2016, 1-12. Disponible

Heli, B., Morales-Narvaez, E., Golmohammadi, H., Ajji, A., & Merkoci, A. (2016). Modulation of population density and size of silver nanoparticles embedded in bacterial cellulose via ammonia exposure: visual detection of volatile compounds in a piece of plasmonic nanopaper. Nanoscale, 8(15), 7984-7991. Lien externe

Shahverdi-Shahraki, K., Ghosh, T., Mahajan, K., Ajji, A., & Carreau, P. (2016). Morphology and thermal properties of poly(ethylene terephthalate)-modified kaolin nanocomposites. Polymer Composites, 37(5), 1443-1452. Lien externe

Saffar, A., Jalali Dil, E., Carreau, P., Ajji, A., & Kamal, M. R. (2016). Phase behavior of binary blends of PP/PP‐g‐AA: limitations of the conventional characterization techniques. Polymer International, 65(5), 508-515. Lien externe

2015

Savoji, H., Maire, M., Hadjizadeh, A., Ajji, A., Lerouge, S., & Wertheimer, M. R. (avril 2015). 3D Electrospun Scaffolds for Vascular Graft Applications: Fine Tuning of Properties by Plasma-Assisted Etching and Coating [Communication écrite]. 58th Annual Technical Conference, Santa Clara, CA USA. Lien externe

Mighri, N., Mao, J., Mighri, F., Ajji, A., & Rouabhia, M. (2015). Chitosan-Coated Collagen Membranes Promote Chondrocyte Adhesion, Growth, and Interleukin-6 Secretion. Materials, 8(11), 7673-7689. Disponible

Mohebbi, A., Mighri, F., Ajji, A., & Rodrigue, D. (2015). Current issues and challenges in polypropylene foaming: A review. Cellular Polymers, 34(6), 299-337. Lien externe

Abdali, H., & Ajji, A. (2015). Development of antibacterial structures and films using clove bud powder. Industrial Crops and Products, 72, 214-219. Lien externe

Patel, J. D., Mighri, F., Ajji, A., & Chaudhuri, T. K. (2015). Development of CdS nanostructures by thermal decomposition of aminocaproic acid-mixed Cd-thiourea complex precursor: Structural, optical and photocatalytic characterization. Journal of Nanoscience and Nanotechnology, 15(4), 2733-2741. Lien externe

Tabasi, R. Y., Najarzadeh, Z., & Ajji, A. (2015). Development of high performance sealable films based on biodegradable/compostable blends. Industrial Crops and Products, 72, 206-213. Lien externe

Audet, E., Mighri, F., Rodrigue, D., & Ajji, A. (2015). Effect of Biaxial Stretching Temperature and Gas Diffusion Expansion on Cellular Morphology of PP/CaCO₃ and PP/talc Cellular Films. Cellular Polymers, 34(5), 233-248. Lien externe

Shahverdi-Shahraki, K., Ghosh, T., Mahajan, K., Ajji, A., & Carreau, P. (2015). Effect of dry grinding on chemically modified kaolin. Applied Clay Science, 105-106, 100-106. Lien externe

Vu, T. T. D., Patel, J., Mighri, F., Do, T.-O., & Ajji, A. (2015). The effect of TiO₂ surface modification on the photovoltaic properties of hybrid bulk heterojunction solar cells based on MEH-PPV/CdS/TiO₂ active layer. Green Processing and Synthesis, 4(2), 79-90. Disponible

Fereydoon, M., Tabatabaei, S. H., & Ajji, A. (2015). Effect of Uniaxial Stretching on Thermal, Oxygen Barrier, and Mechanical Properties of Polyamide 6 and Poly(m-xylene adipamide) Nanocomposite Films. Polymer Engineering and Science, 55(5), 1113-1127. Lien externe

Kolahchi, A. R., Ajji, A., & Carreau, P. (2015). Enhancing Hydrophilicity of Polyethylene Terephthalate Surface Through Melt Blending. Polymer Engineering and Science, 55(2), 349-358. Lien externe

Wang, S., Saffar, A., Ajji, A., Wu, H., & Guo, S.-Y. (2015). Fabrication of microporous membranes from melt extruded polypropylene precursor films via stretching: Effect of annealing. Chinese Journal of Polymer Science, 33(7), 1028-1037. Lien externe

Moayeri, A., & Ajji, A. (2015). Fabrication of polyaniline/poly(ethylene oxide)/non-covalently functionalized graphene nanofibers via electrospinning. Synthetic Metals, 200, 7-15. Lien externe

Kolahchi, A. R., Ajji, A., & Carreau, P. (juin 2014). Improvement of PET surface hydrophilicity and roughness through blending [Communication écrite]. 30th International Conference of the Polymer Processing Society (PPS-30), Cleveland, Ohio, USA (4 pages). Lien externe

Najarzadeh, Z., Ajji, A., & Bruchet, J. B. (2015). Interfacial self-adhesion of polyethylene blends: the role of long chain branching and extensional rheology. Rheologica Acta, 54(5), 377-389. Lien externe

Mohammdi, S. R., Ajji, A., & Tabatabaei, S. H. (juin 2014). Peel/seal properties of poly(ethylene methyl acrylate)/polybutene-1 blend films [Communication écrite]. 30th International Conference of the Polymer Processing Society (PPS-30), Cleveland, Ohio, USA (4 pages). Lien externe

Savoji, H., Lerouge, S., Ajji, A., & Wertheimer, M. R. (2015). Plasma-etching for controlled modification of structural and mechanical properties of electrospun PET scaffolds. Plasma Processes and Polymers, 12(4), 314-327. Lien externe

Matet, M., Heuzey, M.-C., Ajji, A., & Sarazin, P. (2015). Plasticized chitosan/polyolefin films produced by extrusion. Carbohydrate Polymers, 117, 177-184. Lien externe

Shahverdi-Shahraki, K., Ghosh, T., Mahajan, K., Ajji, A., & Carreau, P. (2015). Polyethylene terephthalate/calcined kaolin composites: Effect of uniaxial stretching on the properties. Polymer Engineering and Science, 55(8), 1767-1775. Lien externe

Fereydoon, M., Tabatabaei, S. H., & Ajji, A. (2015). Properties of co-extruded nanoclay-filled aliphatic nylon (PA6)/linear low-density polyethylene and aromatic nylon (MXD6)/linear low-density polyethylene multilayer films. Journal of Plastic Film & Sheeting, 31(1), 45-77. Lien externe

Saffar, A., Tabatabaei, S. H., Carreau, P., Ajji, A., & Kamal, M. R. (2015). Rheology of PP/PP-g-MA and PP/PP-g-AA Blends and Incidence on Orientation and Crystalline Structure of Their Cast Films. Industrial & Engineering Chemistry Research, 54(43), 10787-10795. Lien externe

Tabasi, R. Y., & Ajji, A. (2015). Selective degradation of biodegradable blends in simulated laboratory composting. Polymer Degradation and Stability, 120, 435-442. Lien externe

2014

Abdali, H., & Ajji, A. (avril 2014). Antibacterial properties of electrospun fibers of PCL/clove bud powder [Communication écrite]. 72nd Annual Technical Conference of the Society of Plastics Engineers: The Plastics Conference (ANTEC 2014), Las Vegas, NV, United states. Lien externe

Rokbani, H., & Ajji, A. (avril 2014). Antimicrobial activity of PCL/ZnO electrospun nanofibers [Communication écrite]. 72nd Annual Technical Conference of the Society of Plastics Engineers: The Plastics Conference (ANTEC 2014), Las Vegas, NV, United states. Non disponible

Sadeghi, F., & Ajji, A. (2014). Application of single site catalyst metallocene polyethylenes in extruded films: Effect of molecular structure on sealability, flexural cracking and mechanical properties. Canadian Journal of Chemical Engineering, 92(7), 1181-1188. Lien externe

Binan, L., Ajji, A., De Crescenzo, G., & Jolicoeur, M. (2014). Approaches for Neural Tissue Regeneration. Stem Cell Reviews and Reports, 10(1), 44-59. Lien externe

Tazi, M., Erchiqui, F., Godard, F., Kaddami, H., & Ajji, A. (2014). Characterization of rheological and thermophysical properties of HDPE-wood composite. Journal of Applied Polymer Science, 131(13). Lien externe

Saffar, A., Ajji, A., Carreau, P., & Katnal, M. R. (avril 2014). Development of polypropylene microporous hydrophilic membranes by blending with acrylic acid grafted polypropylene [Communication écrite]. 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2014), Las Vegas, NV, United states. Lien externe

Saffar, A., Carreau, P., Ajji, A., & Kamal, M. R. (2014). Development of polypropylene microporous hydrophilic membranes by blending with PP-g-MA and PP-g-AA. Journal of Membrane Science, 462, 50-61. Lien externe

Binan, L., Tendey, C., De Crescenzo, G., El Ayoubi, R., Ajji, A., & Jolicoeur, M. (2014). Differentiation of neuronal stem cells into motor neurons using electrospun poly-L-lactic acid/gelatin scaffold. Biomaterials, 35(2), 664-674. Lien externe

Sadeghi, F., & Ajji, A. (2014). Effect of molecular structure on seal ability, flex crack and mechanical properties of linear low-density polyethylene films. Journal of Plastic Film and Sheeting, 30(1), 91-111. Lien externe

Boutrouka, R., Tabatabaei, S. H., & Ajji, A. (avril 2014). Effect of molecular structure on the heat seal performance of polypropylene films [Communication écrite]. 72nd Annual Technical Conference of the Society of Plastics Engineers: The Plastics Conference (ANTEC 2014), Las Vegas, NV, United states. Lien externe

Najarzadeh, Z., & Ajji, A. (avril 2014). Effect of seal process parameters on final seal strength behavior for LLDPE [Communication écrite]. 72nd Annual Technical Conference of the Society of Plastics Engineers: The Plastics Conference (ANTEC 2014), Las Vegas, NV, United states. Non disponible

Najarzadeh, Z., & Ajji, A. (octobre 2014). Effect of seal process parameters on final seal strength behavior for LLDPE (FlexPackCon-Science of Sealing) [Communication écrite]. Web Coating and Handling Conference, Myrtle Beach, SC. Non disponible

Savoji, H., Hadjizadeh, A., Maire, M., Ajji, A., Wertheimer, M. R., & Lerouge, S. (2014). Electrospun nanofiber scaffolds and plasma polymerization: A promising combination towards complete, stable endothelial lining for vascular grafts. Macromolecular Bioscience, 14(8), 1084-1095. Lien externe

Patel, J. D., Mighri, F., & Ajji, A. (2014). A facile route towards the preparation of ZnSe nanocrystals. Materials Letters, 131, 366-369. Lien externe

Patel, J., Mighri, F., Ajji, A., & Chaudhuri, T. K. (2014). Facile synthesis of CdSe nanocrystals for bulk-heterojunction solar cells. Journal of Materials Science: Materials in Electronics, 25(9), 4051-4057. Lien externe

Saffar, A., Carreau, P., Kamal, M. R., & Ajji, A. (2014). Hydrophilic modification of polypropylene microporous membranes by grafting TiO2 nanoparticles with acrylic acid groups on the surface. Polymer, 55(23), 6069-6075. Lien externe

Saffar, A., Ajji, A., Carreau, P., & Kamal, M. R. (2014). The impact of new crystalline lamellae formation during annealing on the properties of polypropylene based films and membranes. Polymer Engineering and Science, 55(14), 3156-3167. Lien externe

Saffar, A., Carreau, P., Ajji, A., & Kamal, M. R. (2014). Influence of Stretching on the Performance of Polypropylene-Based Microporous Membranes. Industrial & Engineering Chemistry Research, 53(36), 14014-14021. Lien externe

Ajji, A. (2014). Interphase and compatibilization by addition of a compatibilizer. Dans Utracki, L. A., & Wilkie, C. A. (édit.), Polymer Blends Handbook (2e éd., 447-516). Lien externe

Zohrevand, A., Ajji, A., & Mighri, F. (2014). Microstructure and properties of porous nanocomposite films: Effects of composition and process parameters. Polymer International, 63(12), 2052-2060. Lien externe

Matet, M., Heuzey, M.-C., & Ajji, A. (2014). Morphology and antibacterial properties of plasticized chitosan/metallocene polyethylene blends. Journal of Materials Sciences, 49(15), 5427-5440. Lien externe

Zohrevand, A., Ajji, A., & Mighri, F. (2014). Morphology and properties of highly filled iPP/TiO2 nanocomposites. Polymer Engineering and Science, 54(4), 874-886. Lien externe

Jezierski, A., Rennie, K., Zurakowski, B., Ribecco-Lutkiewicz, M., Haukenfrers, J., Ajji, A., Gruslin, A., Sikorska, M., & Bani-Yaghoub, M. (2014). Neuroprotective Effects of GDNF-expressing Human Amniotic Fluid Cells. Stem Cell Reviews and Reports, 10(2), 251-268. Lien externe

Najarzadeh, Z., & Ajji, A. (2014). A novel approach toward the effect of seal process parameters on final seal strength and microstructure of LLDPE. Journal of Adhesion Science and Technology, 28(16), 1592-1609. Lien externe

Silverwood, R. J., Tabatabae, H., & Ajji, A. (octobre 2014). Peelable-resealable films: FTIR characterisation and peel strength [Communication écrite]. Web Coating and Handling Conference, Myrtle Beach, SC. Lien externe

Moayeri, A., & Ajji, A. (novembre 2013). Preparation of graphene based nanocomposites in electrospun polyaniline/polyethylene oxide blends [Communication écrite]. Nanoscale Science and Engineering Forum 2013 - Core Programming Area at the 2013 AIChE Annual Meeting: Global Challenges for Engineering a Sustainable Future, San Francisco, CA, United states. Non disponible

Zohrevand, A., Ajji, A., & Mighri, F. (2014). Relationship between rheological and electrical percolation in a polymer nanocomposite with semiconductor inclusions. Rheologica Acta, 53(3), 235-254. Lien externe

Fereydoon, M., Tabatabaei, S. H., & Ajji, A. (2014). Rheological, crystal structure, barrier, and mechanical properties of PA6 and MXD6 nanocomposite films. Polymer Engineering and Science, 54(11), 2617-2631. Lien externe

Najarzadeh, Z., Tabasi, R. Y., & Ajji, A. (2014). Sealability and seal characteristics of PE/EVA and PLA/PCL blends. International Polymer Processing, 29(1), 95-102. Lien externe

Patel, J., Mighri, F., Ajji, A., & Chaudhuri, T. K. (2014). Solution processed approaches for bulk-heterojunction solar cells based on Pb and Cd chalcogenide nanocrystals. Nano Energy, 5, 36-51. Lien externe

Patel, J., Mighri, F., Ajji, A., Tiwari, D., & Chaudhuri, T. K. (2014). Spin-coating deposition of PbS and CdS thin films for solar cell application. Applied Physics A: Materials Science and Processing, 117(4), 1791-1799. Lien externe

Kolahchi, A. R., Ajji, A., & Carreau, P. (2014). Surface Morphology and Properties of Ternary Polymer Blends: Effect of the Migration of Minor Components. Journal of Physical Chemistry B, 118(23), 6316-6323. Lien externe

Kolahchi, A. R., Carreau, P., & Ajji, A. (2014). Surface Roughening of PET Films through Blend Phase Coarsening. ACS Applied Materials & Interfaces, 6(9), 6415-6424. Lien externe

Mighri, F., Duong, V. T. T., On, D. T., & Ajji, A. (juillet 2013). Synthesis of capped TiO2 nanocrystals of controlled shape and their use with MEH-PPV conjugated polymer to develop nanocomposite films for photovoltaic applications [Communication écrite]. 29th International Conference of the Polymer Processing Society (PPS 2013), Nuremberg, Germany. Lien externe

Vu, T. T. D., Mighri, F., Ajji, A., & Do, T.-O. (2014). Synthesis of titanium dioxide/cadmium sulfide nanosphere particles for photocatalyst applications. Industrial and Engineering Chemistry Research, 53(10), 3888-3897. Lien externe

Fereydoon, M., Tabatabaei, S. H., & Ajji, A. (2014). X-ray and Trichroic Infrared Orientation Analyses of Uniaxially Stretched PA6 and MXD6 Nanoclay Composite Films SO MACROMOLECULES VL 47 IS 7 BP 2384 EP 2395 DI 10.1021/ma402466c PD APR 8 2014 PY 2014 TC 2 ZB 0. Macromolecules, 47(7), 2384-2395. Lien externe

2013

Hadjizadeh, A., Ajji, A., Jolicoeur, M., Liberelle, B., & De Crescenzo, G. (2013). Effects of electrospun nanostructure versus microstructure on human aortic endothelial cell behavior. Journal of Biomedical Nanotechnology, 9(7), 1195-1209. Lien externe

Patel, J. D., Mighri, F., Ajji, A., & Chaudhuri, T. K. (2013). Fatty Acid-Assisted Synthesis of Cds Microspheres: Physicochemical Properties and Photocatalytic Activity. Materials Letters, 110, 94-97. Lien externe

Matet, M., Heuzey, M.-C., Pollet, E., Ajji, A., & Avérous, L. (2013). Innovative thermoplastic chitosan obtained by thermo-mechanical mixing with polyol plasticizers. Carbohydrate Polymers, 95(1), 241-251. Lien externe

Zohrevand, A., Ajji, A., & Mighri, F. (juillet 2013). Microstructure and mechanical properties of isotactic polypropylene reinforced with TiO₂ nanoparticles [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe

Sadeghi, F., Fereydoon, M., & Ajji, A. (2013). Rheological, mechanical and barrier properties of multilayer nylon/clay nanocomposite film. Advances in Polymer Technology, 32(SUPPL.1), E53-E64. Lien externe

2012

Savoji, H., Hadjizadeh, A., Maire, M., Lerouge, S., Ajji, A., & Wertheimer, M. R. (juin 2012). 3D electrospun PET nano-fibrous mats with plasma-polymer coating for vascular graft applications [Communication écrite]. 4th International Conference on Plasma Medicine (ICPM-4), Orléans, France. Lien externe

Patel, J. D., Mighri, F., & Ajji, A. (2012). Aminocaproic Acid Mixed Methanolic Lead-Thiourea Complex Precursor and Its Thermal Decomposition to Star-Shaped Lead Sulfide Crystals. Materials Letters, 74, 183-186. Lien externe

Fereydoon, M., Tabatabaei, S. H., & Ajji, A. (avril 2012). Comparative thermal and rheological study of aromatic and aliphatic polyamide nanocomposites and films [Communication écrite]. 70th Annual Technical Conference of the Society of Plastics Engineers 2012, ANTEC 2012, Orlando, FL, United states. Lien externe

Pakravan, M., Heuzey, M.-C., & Ajji, A. (2012). Core-Shell Structured Peo-Chitosan Nanofibers by Coaxial Electrospinning. Biomacromolecules, 13(2), 412-421. Lien externe

Tabatabaei, S. H., & Ajji, A. (2012). Crystal Structure and Orientation of Uniaxially and Biaxially Oriented Pla and Pp Nanoclay Composite Films. Journal of Applied Polymer Science, 124(6), 4854-4863. Lien externe

Pakravan, M., Heuzey, M.-C., & Ajji, A. (2012). Determination of phase behavior of poly(ethylene oxide) and chitosan solution blends using rheometry. Macromolecules, 45(18), 7621-7633. Lien externe

Mezghani, K., Furquan, S., Tabatabaei, S. H., & Ajji, A. (2012). Effect of blend ratio of h-LDPE and LDPE on tear properties of blown films. International Polymer Processing, 27(3), 392-398. Lien externe

Rezaei Kolahchi, A., Ajji, A., & Carreau, P. (avril 2012). Effect of stabilizers, molecular weight and environment on thermal stability of Polyethylene Glycol (PEG) [Communication écrite]. 70th Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2012), Orlando, FL, United states. Lien externe

Patel, J. D., Mighri, F., & Ajji, A. (2012). Generalized Chemical Route to Develop Fatty Acid Capped Highly Dispersed Semiconducting Metal Sulphide Nanocrystals. Materials Research Bulletin, 47(8), 2016-2021. Lien externe

Patel, J. D., Mighri, F., Ajji, A., & Chaudhuri, T. K. (2012). Morphology and Size Control of Lead Sulphide Nanoparticles Produced Using Methanolic Lead Acetate Trihydrate-Thiourea Complex Via Different Precipitation Techniques. Materials Chemistry and Physics, 132(2-3), 747-755. Lien externe

Mohebbi-Kalhori, D., Rukhlova, M., Ajji, A., Bureau, M., & Moreno, M. J. (2012). A Novel Automated Cell-Seeding Device for Tissue Engineering of Tubular Scaffolds: Design and Functional Validation. Journal of Tissue Engineering and Regenerative Medicine, 6(9), 710-720. Lien externe

Song, J., Mighri, F., Ajji, A., & Lu, C. (2012). Polyvinylidene fluoride/poly(ethylene terephthalate) conductive composites for proton exchange membrane fuel cell bipolar plates: Crystallization, structure, and through-plane electrical resistivity. Polymer Engineering and Science, 52(12), 2552-2558. Lien externe

Sadeghi, F., & Ajji, A. (2012). Rheological, Physical, and Thermal Characterization of Single-Site Catalyst Based Polyethylenes for Seal Layer Applications. Polymer Engineering and Science, 52(5), 1089-1098. Lien externe

Patel, J. D., Mighri, F., Ajji, A., & Elkoun, S. (2012). Room Temperature Synthesis of Aminocaproic Acid-Capped Lead Sulphide Nanoparticles. Materials Sciences and Applications, 03(02), 125-130. Lien externe

Najarzadeh, Z., & Ajji, A. (juin 2012). Seal strength optimization for LDPE/EVA blends blown films [Communication écrite]. 18th IAPRI World Packaging Conference, San Luis Obispo, CA, United states. Non disponible

Savoji, H., Berrahmoune, S., Macossay-Torres, J., Lerouge, S., Ajji, A., & Wertheimer, M. R. (août 2012). Structural compositional and cell-adhesion properties of 3D electrospun Biospan® nano-fibrous mats with plasma-polymer coatings [Communication écrite]. 3rd International Conference on Nanotechnology : Fundamentals and Applications (ICNFA 2012), Montréal, Québec. Non disponible

Sadeghi, F., & Ajji, A. (2012). Structure, mechanical and barrier properties of uniaxially stretched multilayer nylon/clay nanocomposite films. International Polymer Processing, 27(5), 565-573. Lien externe

Silverwood, R. J., Sadeghi, F., & Ajji, A. (avril 2012). Study of the kinetic of slip agent migration in polyethylene sheets [Communication écrite]. 70th Annual Technical Conference of the Society of Plastics Engineers 2012, ANTEC 2012, Orlando, FL, United states. Non disponible

Thuy Duong Vu, T., Mighri, F., Do, T.-O., & Ajji, A. (2012). Synthesis of Capped TiO₂ Nanocrystals of Controlled Shape and Their Use With Meh-Ppv to Develop Nanocomposite Films for Photovoltaic Applications. Journal of Nanoscience and Nanotechnology, 12(3), 2815-2824. Lien externe

2011

Tabatabaei, S. H., & Ajji, A. (2011). Applications of biaxial stretched films. Dans Biaxial Stretching of Film: Principles and Applications (231-239). Lien externe

Moreno, M. J., Ajji, A., Mohebbi-Kalhori, D., Rukhlova, M., Hadjizadeh, A., & Bureau, M. (2011). Development of a compliant and cytocompatible micro-fibrous polyethylene terephthalate vascular scaffold. Journal of Biomedical Materials Research. Part B, Applied Biomaterials, 97 B(2), 201-214. Lien externe

Silverwood, R. J., & Ajji, A. (mai 2011). Development of an antibacterial film for application in the food industry [Communication écrite]. 69th Annual Technical Conference of the Society of Plastics Engineers 2011, ANTEC 2011, Boston, MA, United states. Non disponible

Tabatabaei, S. H., & Ajji, A. (2011). Effect of initial crystalline morphology on properties of polypropylene cast films. Journal of Plastic Film and Sheeting, 27(3), 223-233. Lien externe

Tabatabaei, S. H., Ajji, A., & Ghasemi, H. (2011). Effect of Random and Block Copolypropylenes on Structure and Properties of Uniaxially and Biaxially Oriented PP Films. International Polymer Processing, 26(1), 82-90. Lien externe

Dimitrievska, S., Petit, A., Doillon, C. J., Epure, L., Ajji, A., Yahia, L., & Bureau, M. (2011). Effect of Sterilization on Non-woven Polyethylene Terephthalate Fiber Structures for Vascular Grafts. Macromolecular Bioscience, 11(1), 13-21. Lien externe

Fang, H., Mighri, F., Ajji, A., Cassagnau, P., & Elkoun, S. (2011). Flow behavior in a corotating twin-screw extruder of pure polymers and blends: Characterization by fluorescence monitoring technique. Journal of Applied Polymer Science, 120(4), 2304-2312. Lien externe

Pakravan, M., Heuzey, M.-C., & Ajji, A. (2011). A fundamental study of chitosan/PEO electrospinning. Polymer, 52(21), 4813-4824. Lien externe

Dimitrievska, S., Maire, M., Diaz-Quijada, G. A., Robitaille, L., Ajji, A., Yahia, L., Moreno, M., Merhi, Y., & Bureau, M. (2011). Low Thrombogenicity Coating of Nonwoven PET Fiber Structures for Vascular Grafts. Macromolecular Bioscience, 11(4), 493-502. Lien externe

Hadjizadeh, A., Ajji, A., & Bureau, M. (2011). Nano/micro electro-spun polyethylene terephthalate fibrous mat preparation and characterization. Journal of the Mechanical Behavior of Biomedical Materials, 4(3), 340-351. Lien externe

Tabatabaei, S. H., & Ajji, A. (2011). Orientation, mechanical, and optical properties of poly (lactic acid) nanoclay composite films. Polymer Engineering and Science, 51(11), 2151-2158. Lien externe

Patel, J. D., Mighri, F., & Ajji, A. (2011). Rapid synthesis of highly dispersed and stable oleic acid capped lead sulphide nanoparticles. Advanced Science Letters, 4(11/12), 3644-3648. Lien externe

Najarzadeh, Z., & Ajji, A. (mai 2011). Seal layer materials characterization in terms of crystallinity and rheology [Communication écrite]. 69th Annual Technical Conference of the Society of Plastics Engineers 2011, ANTEC 2011, Boston, MA, United states. Non disponible

Patel, J., Mighri, F., & Ajji, A. (2011). Simple non-aqueous fabrication route for oleic acid capped luminescent cadmium sulphide quantum dots at relatively low temperature. Soft nanoscience letters, 1(3), 61-65. Lien externe

Tabatabaei, S. H., & Ajji, A. (2011). Structure-orientation-properties relationships for polypropylene nanoclay composite films. Journal of Plastic Film and Sheeting, 27(1-2), 87-115. Lien externe

2010

Stoeffler, K., Dubois, C., Ajji, A., Guo, N., Boismenu, F., & Skorobogatiy, M. A. (2010). All-polymeric photonic bandgap polystyrene/polymethyl methacrylate Bragg fibers. SPE Plastic research online, 3 pages. Lien externe

Tabatabaei, S. H., Carreau, P., & Ajji, A. (2010). Cast films, microporous membranes, and method of preparation thereof. (Demande de brevet no WO2010148492). Lien externe

Stoeffler, K., Dubois, C., Ajji, A., Guo, N., Boismenu, F., & Skorobogatiy, M. A. (2010). Fabrication of all-polymeric photonic bandgap Bragg fibers using rolling of coextruded PS/PMMA multilayer films. Polymer Engineering and Science, 50(6), 1122-1127. Lien externe

Mazinani, S., Ajji, A., & Dubois, C. (2010). Fundamental study of crystallization, orientation, and electrical conductivity of electrospun PET/carbon nanotube nanofibers. Journal of Polymer Science, Part B: Polymer Physics, 48(19), 2052-2064. Lien externe

Hadjizadeh, A., Ajji, A., & Bureau, M. (2010). Preparation and characterization of NaOH treated micro-fibrous polyethylene terephthalate nonwovens for biomedical application. Journal of the Mechanical Behavior of Biomedical Materials, 3(8), 574-583. Lien externe

Sadeghi, F., Tabatabaei, S. H., Ajji, A., & Carreau, P. (2010). Properties of uniaxially stretched polypropylene films: Effect of drawing temperature and random copolymer content. Canadian Journal of Chemical Engineering, 88(6), 1091-1098. Lien externe

Tabatabaei, S. H., Carreau, P., & Ajji, A. (2010). Rheological Properties of Blends of Linear and Long-Chain Branched Polypropylenes. Polymer Engineering and Science, 50(1), 191-199. Lien externe

Mazinani, S., Ajji, A., & Dubois, C. (2010). Structure and properties of melt-spun PET/MWCNT nanocomposite fibers. Polymer Engineering and Science, 50(10), 1956-1968. Lien externe

Sadeghi, F., Tabatabei, H., Carreau, P., & Ajji, A. (février 2010). Structure and properties of PP films: Effect of cast film process conditions, MDO stretching and blending with a random PP [Communication écrite]. International Polyolefins Conference, Houston, TX, United states. Non disponible

2009

Gauvreau, B., Guo, N., Schicker, K., Stoeffler, K., Boismenu, F., Ajji, A., Dubois, C., & Skorobogatiy, M. A. (juin 2009). Colorful photonic band gap fiber-based textiles [Communication écrite]. Conference on Lasers and Electro-Optics and 2009 Conference on Quantum Electronics and Laser Science Conference, Baltimore, MD, United states. Lien externe

Fatahi, S., Ajji, A., & Lafleur, P. (2009). Correlation between different microstructural parameters and tensile modulus of various polyethylene blown films. Polymer Engineering and Science, 47(9), 1430-1440. Lien externe

Parent, L., Cigana, P., Ajji, A., & Carreau, P. (juin 2009). Effect of machine direction orientation conditions on structure and properties of hdpe films [Communication écrite]. 67th Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2009), Chicago, IL, United states. Lien externe

Tabatabaei, S. H., Carreau, P., & Ajji, A. (2009). Effect of processing on the crystalline orientation, morphology, and mechanical properties of polypropylene cast films and microporous membrane formation. Polymer, 50(17), 4228-4240. Lien externe

Sadeghi, F., Tabatabaei, S. H., Ajji, A., & Carreau, P. (2009). Effect of PVDF characteristics on extruded film morphology and porous membranes feasibility by stretching. Journal of Polymer Science. Part B: Polymer Physics, 47(12), 1219-1229. Lien externe

Tabatabaei, S. H., Carreau, P., & Ajji, A. (2009). Microporous membranes obtained from PP/HDPE multilayer films by stretching. Journal of Membrane Science, 345(1-2), 148-159. Lien externe

Mazinani, S., Ajji, A., & Dubois, C. (2009). Morphology, structure and properties of conductive PS/CNT nanocomposite electrospun mat. Polymer, 50(14), 3329-3342. Lien externe

Bureau, M., Maire, M., Diaz-Quijada, G., Robitaille, L., Ajji, A., & Merhi, Y. (juin 2009). Nonwoven pet fiber structures for vascular graft applications [Communication écrite]. 67th Annual Technical Conference of the Society of Plastics Engineers, Chicago, IL, United states. Lien externe

Cigana, P., Parent, L., Tabatabei, H., Sadeghi, F., Carreau, P., & Ajji, A. (février 2009). Process, structure and properties of cast and MDO stretched films of HDPE, PP and blends of random and linear PPS [Communication écrite]. International Polyolefins Conference, Houston, Tx, USA. Non disponible

Tabatabaei, S. H., Carreau, P., & Ajji, A. (2009). Rheological and thermal properties of blends of a long-chain branched polypropylene and different linear polypropylenes. Chemical Engineering Science, 64(22), 4719-4731. Lien externe

Tabatabaei, S. H., Carreau, P., & Ajji, A. (2009). Structure and properties of MDO stretched polypropylene. Polymer, 50(16), 3981-3989. Lien externe

Mazinani, S., Ajji, A., & Dubois, C. (juin 2009). Structure and properties of melt-spun PET/MWCNT nanocomposite fibers [Communication écrite]. 67th Annual Technical Conference of the Society of Plastics Engineers, Chicago, IL, United states. Lien externe

2008

Dimitrievska, S., Petit, A., Ajji, A., Bureau, M., & Yahia, L. (2008). Biocompatibility of Novel Polymer-Apatite Nanocomposite Fibers. Journal of Biomedical Materials Research. Part A, 84A(1), 44-53. Lien externe

Gendron, R., Ajji, A., Dufour, J., Dimitrievska, S., & Bureau, M. (août 2008). Cell attachment on new fibrous pet structures for vascular grafts under controlled shear stress: experimental set-up and methodology [Communication écrite]. 15th International Congress on Rheology, Monterey, CA. Lien externe

Gauvreau, B., Guo, N., Schicker, K., Stoeffler, K., Boismenu, F., Ajji, A., Wingfield, R., Dubois, C., & Skorobogatiy, M. A. (2008). Color-Changing and Color-Tunable Photonic Bandgap Fiber Textiles. Optics Express, 16(20), 15677-15693. Lien externe

Bureau, M., Moreno, M., & Ajji, A. (mai 2008). Endothelial/Smooth muscle cells growth into nonwoven fiber vascular grafts [Communication écrite]. International Congress on Biomaterials, Amsterdam, Netherlands. Non disponible

Bureau, M., Moreno, M., & Ajji, A. (octobre 2008). Endothelial/Smooth muscle cells growth into nonwoven fiber vascular grafts [Communication écrite]. Fiber Society 2008 Fall Meeting and Technical Conference, Boucherville, Québec, Canada. Non disponible

Trudel-Boucher, D., Ajji, A., & Denault, J. (octobre 2008). Experimental investigation on the consolidation of polypropylene-clay nanocomposites [Communication écrite]. Fiber Society 2008 Fall Meeting and Technical Conference, Boucherville, Québec, Canada. Non disponible

Trudel-Boucher, D., Ajji, A., & Denault, J. (mai 2008). Experimental investigation on the consolidation of polypropylene-clay nanocomposites fibers [Communication écrite]. SPE-ANTEC 2008, Milwakee, WI, USA. Non disponible

Dubois, C., Skorobogatiy, M. A., Ajji, A., & Stoeffler, K. (octobre 2008). Fabrication of 1D photonic crystals based on hollow/solid-core all-polymer optic fibers [Communication écrite]. 2008 Fiber Society Fall Meeting and Technical Conference, Boucherville, Québec, Canada. Non disponible

Tabatabaei, S. H., Carreau, P., & Ajji, A. (juin 2008). Microporous membranes obtained from polypropylene blend films by stretching [Communication écrite]. Polymer Processing International Meeting, Salerno, Italy. Non disponible

Tabatabaei, S. H., Carreau, P., & Ajji, A. (2008). Microporous membranes obtained from polypropylene blend films by stretching. Journal of Membrane Science, 325(2), 772-782. Lien externe

Sadeghi, F., Ajji, A., & Carreau, P. (2008). Microporous Membranes Obtained From Polypropylene Blends With Superior Permeability Properties. Journal of Polymer Science. Part B: Polymer Physics, 46(2), 148-157. Lien externe

Mazinani, S., Dubois, C., & Ajji, A. (octobre 2008). Morphological and physical characterization of PET/MWCNT Melt-Spun fibers [Communication écrite]. 2008 Fiber Society Fall Meeting and Technical Conference, Boucherville, QC, Canada. Non disponible

Ajji, A., Laforgue, A., & Robitaille, L. (mai 2008). Nano and micro fibers for conductive and piezoelectric applications [Communication écrite]. Fiber Society 2008 Spring Meeting, Mulhouse, France. Lien externe

Ajji, A. (juin 2008). Nano and micro fibers for conductive and piezoelectric applications [Communication écrite]. Polymer Processing International Meeting, Salerno, Italy. Non disponible

Ajji, A. (juin 2023). Nano and micro fibers for conductive applications [Communication écrite]. Ambiance 2008, Boras, Finland. Non disponible

Bani-Yaghoub, M., Tremblay, R. G., Ajji, A., Nzau, M., Gangaraju, S., Chitty, D., Zurakowski, B., & Sikorska, M. (2008). Neuroregenerative strategies in the brain: emerging significance of bone morphogenetic protein 7 (BMP7). Biochemistry and Cell Biology, 86(5), 361-369. Lien externe

Ajji, A., & Zhang, X. (février 2008). PE//PP Multilayer and nanocomposite films: some process-structure-performance relationships [Communication écrite]. SPE-Polyolefins conference, Houston, TX, USA. Lien externe

Pakravan, M., Heuzey, M.-C., & Ajji, A. (octobre 2008). Preparation of chitosan-based non-woven mat using electrospinning process [Communication écrite]. 2008 Fiber Society Fall Meeting and Technical Conference, Boucherville, QC, Canada. Non disponible

Pakravanlonbani, M., Heuzey, M.-C., & Ajji, A. (octobre 2008). Preparation of chitosan-based nonwoven mat using electrospinning process [Communication écrite]. Fiber Society 2008 Fall Meeting and Technical Conference, Boucherville, Québec, Canada. Non disponible

Mazinani, S., Dubois, C., & Ajji, A. (octobre 2008). Production and characterization of electrospun PET/MWCNT nanocomposite nanofiber [Communication écrite]. Fiber Society 2008 Fall Meeting and Technical Conference, Boucherville, Québec, Canada. Non disponible

Mazinani, S., Dubois, C., & Ajji, A. (octobre 2008). Production and characterization of electrospun PET/MWCNT nanocomposite nanofiber mat [Communication écrite]. 2008 Fiber Society Fall Meeting and Technical Conference, Boucherville, QC, Canada. Non disponible

Mazinani, S., Ajji, A., & Dubois, C. (août 2008). Rheological/Morphological study of PS/CNT nanocomposite electrospun fibers [Communication écrite]. 15th International Congress on Rheology, Monterey, CA. Lien externe

Tabatabaei, S. H., Carreau, P., & Ajji, A. (mai 2008). Rheology and properties of blends of two linear and a long-chain branched polypropylenes [Communication écrite]. 66th Annual Technical Conference of the Society of Plastics Engineers, Plastics Encounter at ANTEC 2008. Non disponible

Laforgue, A., Robitaille, L., & Ajji, A. (octobre 2008). Strategies for the fabrication of conductive fibers using electrospinning and melt-spinning techniques [Communication écrite]. Fiber Society 2008 Fall Meeting and Technical Conference, Boucherville, Québec, Canada. Non disponible

Sadeghi, F., & Ajji, A. (juin 2008). Study of structure of PVDF-nanoclay films : effect of preparation conditions and clay [Communication écrite]. Polymer Processing International Meeting, Salerno, Italy. Non disponible

2007

Sadeghi, F., Ajji, A., & Carreau, P. (2007). Analysis of Microporous Membranes Obtained From Polypropylene Films by Stretching. Journal of Membrane Science, 292(1), 62-71. Lien externe

Sadeghi, F., Ajji, A., & Carreau, P. (2007). Analysis of Row Nucleated Larnellar Morphology of Polypropylene Obtained From the Cast Film Process : Effect of Melt Rheology and Process Conditions. Polymer Engineering and Science, 47(7), 1170-1178. Lien externe

Dimitrievska, S., Petit, A., Ajji, A., Bureau, M., & Yahia, L. (février 2007). Biocompatibility of a novel bioactive polymer-apatite nanocomposite [Communication écrite]. 53rd Annual Meeting of the Orthopaedic Research Society, San Diego, CA. Publié dans Tissue Engineering, 13(4). Non disponible

Lafrogue, A., Robitaille, L., Mokrini, A., & Ajji, A. (2007). Fabrication and characterization of ionic conducting nanofibers. Macromolecular Materials and Engineering, 292(12), 1229-1236. Lien externe

Fang, H., Mighri, F., & Ajji, A. (2007). Fluorescence quenching of phenanthrene and anthracene by maleic anhydride and n-octadecenylsuccinic anhydride in solution and in bulk polypropylene. Polymer Engineering and Science, 47(2), 192-199. Lien externe

Maire, M., Ajji, A., Bureau, M., Robitaille, L., & Yahia, L. (avril 2007). Hemocompatibility of new fibrous PET structures with and without surface modification [Communication écrite]. International Symposium on Polymeric Materials for Regenerative Medicine 2007. Lien externe

Fatahi, S., Ajji, A., & Lafleur, P. (2007). Investigation on the Structure and Properties of Different Pe Blown Films. International Polymer Processing, 22(4), 334-345. Lien externe

Fang, H., Mighri, F., & Ajji, A. (2007). Miscibility characterization of SMA/SAN and SMA/PMMA blends by differential scanning calorimetry and fluorescence techniques. Journal of Applied Polymer Science, 105(5), 2955-2962. Lien externe

Moreno, M., Ajji, A., & Bureau, M. (juin 2007). New fibrous PET structures for vascular grafts : effect of fiber structure on endothelial and smooth muscle cell attachment and growth [Communication écrite]. 7th International Symposium on Frontiers in Biomedical Polymers, Gent, Belgium. Lien externe

Moreno, M., & Ajji, A. (avril 2007). New fibrous PET structures for vascular grafts : effect of fiber structure on endothelial and smooth muscle cell attachment and growth [Communication écrite]. International Symposium on Polymeric Materials for Regenerative Medicine 2007, Boucherville, Québec. Non disponible

Dimitrievska, S., Ajji, A., Bureau, M., Petit, A., & Yahia, L. (avril 2007). Novel bioactive polymer-apatite nanocomposite fibres and their biocompatibility [Communication écrite]. International Symposium on Polymeric Materials for Regenerative Medicine 2007, Boucherville, Québec. Lien externe

Ajji, A., Denault, J., Côté, D., Bureau, M., & Trudel-Boucher, D. (2007). Polypropylene nanocomposite fibers : structure and some applications. International Polymer Processing, 22(4), 368-374. Lien externe

Bani, M., & Ajji, A. (avril 2007). Repairing the injured brain with ex vivo-engineered neuroscaffolds [Communication écrite]. International Symposium on Polymeric Materials for Regenerative Medicine 2007, Boucherville, Québec. Non disponible

Sadeghi, F., & Ajji, A. (avril 2007). Various porous structures for biomedical applications [Communication écrite]. International Symposium on Polymeric Materials for Regenerative Medicine 2007, Boucherville, Québec. Non disponible

2006

Fatahi, S., Ajji, A., & Lafleur, P. (mai 2006). Correlations of tensile modulus for polyethylene blown films with microstructural parameters [Communication écrite]. ANTEC 2006, Charlotte, NC, United States. Lien externe

2005

Fatahi, S., Ajji, A., & Lafleur, P. (2005). Correlation between structural parameters and property of PE blown films. Journal of Plastic Film & Sheeting, 21(4), 281-305. Lien externe

Fatahi, S., Ajji, A., & Lafleur, P. (mai 2005). Structure-property correlations for pe blown films [Communication écrite]. ANTEC 2005. 63rd SPE Annual conference, Boston, Mass., USA. Lien externe

Sadeghi, F., Ajji, A., & Carreau, P. (2005). Study of polypropylene morphology obtained from blown and cast film processes: Initial morphology requirements for making porous membrane by stretching. Journal of Plastic Film & Sheeting, 21(3), 199-216. Lien externe

2002

Daly, H. B., Cole, K. C., Ajji, A., Nguyen, K. T., & Sanschagrin, B. (mai 2002). Molecular orientation in injection-blow-molded bottles [Communication écrite]. ANTEC 2002. 60th SPE Annual Technical Conference, San Francisco, Ca., USA. Lien externe

Liste produite: Thu Mar 28 04:17:27 2024 EDT.