 | Monter d'un niveau |
Abdelgawad, B. (2013). Design of a Gas-Solid Fluidized Bed Reactor at High Temperature and High Pressure [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Abdollahi-Neisiani, M., Laviolette, J.-P., Jafari, R., & Chaouki, J. (2013). Biomass Pretreatments for Biorefinery Applications: Gasification. Dans Pretreatment Techniques for Biofuels and Biorefineries (p. 197-227). Lien externe
Aghabararnejad, M., Chaouki, J., & Patience, G. S. (novembre 2013). Modeling of biomass gasification in the presence oc Co3O4 in a bubbling fluidized bed [Communication écrite]. AIChE Annual Meeting, San Francisco, CA. Lien externe
Alizadeh, E. (2013). Numerical and Experimental Investigation of Solid Mixing and Segregation in Tumbling Blenders [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Alizadeh, E., Bertrand, F., & Chaouki, J. (2013). Development of a granular normal contact force model based on a non-Newtonian liquid filled dashpot. Powder Technology, 237, 202-212. Lien externe
Alizadeh, E., Dube, O., Bertrand, F., & Chaouki, J. (2013). Characterization of Mixing and Size Segregation in a Rotating Drum by a Particle Tracking Method. AICHE Journal, 59(6), 1894-1905. Lien externe
Alizadeh, E., Dubé, O., Chaouki, J., & Bertrand, F. (août 2013). Validation of discrete element based models for the simulation of granular flows [Communication écrite]. 9th world Congress of Chemical Engineering (WEEC9), Seoul, Korea. Non disponible
Alizadeh, E., Hajhashemi, H., Bertrand, F., & Chaouki, J. (2013). Experimental investigation of solid mixing and segregation in a tetrapodal blender. Chemical Engineering Science, 97, 354-365. Lien externe
Amini, S., Mortazavi, F., Sun, J., Lévesque, M., Hoemann, C. D., & Villemure, I. (2013). Stress relaxation of swine growth plate in semi-confined compression: Depth dependent tissue deformational behavior versus extracellular matrix composition and collagen fiber organization. Biomechanics and Modeling in Mechanobiology, 12(1), 67-78. Lien externe
Arias, A., Heuzey, M.-C., & Huneault, M. A. (2013). Thermomechanical and crystallization behavior of polylactide-based flax fiber biocomposites. Cellulose, 20(1), 439-452. Lien externe
Arias, A., Kawano, C., Heuzey, M.-C., & Huneault, M. A. (juillet 2013). Compatibilization of polylactide-based flax fiber biocomposites [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe
Arzpeyma, G., Gheribi, A. E., & Medraj, M. (2013). On the prediction of Gibbs free energy of mixing of binary liquid alloys. Journal of Chemical Thermodynamics, 57, 82-91. Lien externe
Bashiri, H., Alizadeh, F., Bertrand, F., Chaouki, J., & Heniche, M. (novembre 2013). Investigation of single and multiphase fluid flow behavior in stirred tanks by means of CFD and radioactive particle tracking [Communication écrite]. 2013 AIChE Annual Meeting, San Francisco, CA, USA. Lien externe
Batsy, D. R., Lesage, P., Samson, R., & Stuart, P. R. (mai 2013). Environmental Impact Assessment of Forest Biorefinery Product Portfolios [Présentation]. Dans 63rd Canadian Society for Chemical Engineering (CSChE) Conference, Fredericton, NB, Canada. Non disponible
Batsy, D. R., Solvason, C. C., Sammons, N. E., Chambost, V., Bilhartz, D. L., Eden, M. R., El-Halwagi, M. M., & Stuart, P. R. (2013). Product portfolio selection and process design for the forest biorefinery. Dans Integrated biorefineries : design, analysis and optimization (p. 3-36). Lien externe
Behrang, A., Grmela, M., Dubois, C., Turenne, S., & Lafleur, P. (2013). Influence of particle-matrix interface, temperature, and agglomeration on heat conduction in dispersions. Journal of Applied Physics, 114(1). Lien externe
Bell, A., Lasau-Coman, V., Sun, J., Lowerison, M., Hurtig, M. B., & Hoemann, C. D. (2013). Bone-induced chondroinduction in sheep Jamshidi biopsy defects with and without treatment by subchondral chitosan-blood implant: 1 day, 3 week, and 3 month repair. CARTILAGE, 4(2), 131-143. Lien externe
Bernier, É., Maréchal, F., & Samson, R. (2013). Life cycle optimization of energy-intensive processes using eco-costs. The International Journal of Life Cycle Assessment, 18(9), 1747-1761. Lien externe
Blais, B., & Bertrand, F. (novembre 2013). Towards the combination of modeling strategies for solid-liquid mixing [Communication écrite]. AICHE annual meeting, San Francisco, CA. Non disponible
Blais, B., Braeunig, J.-P., Chauveheid, D., Ghidaglia, J.-M., & Loubere, R. (2013). Dealing with more than two materials in the FVCF-ENIP method. European Journal of Mechanics. Part B : Fluids, 42, 1-9. Lien externe
Blanco, R. M., Shekari, A., Carrazan, S. G., Bordes-Richard, E., Patience, G. S., & Ruiz, P. (2013). Significant Catalytic Recovery of Spent Industrial Dupont Catalysts by Surface Deposition of an Amorphous Vanadium-Phosphorus Oxide Phase. Catalysis Today, 203, 48-52. Lien externe
Boffito, D. C., Mansi, S., Leveque, J. M., Pirola, C., Bianchi, C. L., & Patience, G. S. (2013). Ultrafast Biodiesel Production Using Ultrasound in Batch and Continuous Reactors. ACS Sustainable Chemistry & Engineering, 1(11), 1432-1439. Lien externe
Boffito, D. C., Pirola, C., Bianchi, C. L., Cerrato, G., Morandi, S., & Ashokkumar, M. (2013). Sulfated inorganic oxides for methyl esters production: Traditional and ultrasound-assisted techniques. Dans Producing Fuels and Fine Chemicals from Biomass Using Nanomaterials (p. 137-162). Lien externe
Boffito, D. C., Pirola, C., Bianchi, C., & Patience, G. S. (juillet 2013). Sonochemical techniques for the transformation of bio-based oils into fuel [Communication écrite]. 1st Meeting of Asia-Oceania Sonochemical Society, Melbourne, Australia. Non disponible
Boffito, D. C., Pirola, C., Bianchi, C., & Patience, G. S. (avril 2013). Sonochemical techniques to increase the efficiency of methyl esters production from non-food oils [Communication écrite]. 245th ACS National Meeting and Exposition, New Orleans, Louisiana. Non disponible
Bonhivers, J.-C. (2013). Nouvelle méthode d'intégration énergétique pour la rétro-installation des procédés industriels et la transformation des usines papetières [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Bonhivers, J.-C., & Stuart, P. R. (2013). Applications of process integration methodologies in the pulp and paper industry. Dans Handbook of process integration (PI) : minimisation of energy and w ater use, waste and emissions (p. 820-863). Lien externe
Bontems, P.-O., & Stuart, P. R. (mai 2013). Understanding the Link Between Lignin Sources and Lignin Derivatives [Présentation]. Dans 63rd Canadian Society for Chemical Engineering (CSChE) Conference, Fredericton, NB, Canada. Non disponible
Bonvin, D., & Srinivasan, B. (2013). On the role of the necessary conditions of optimality in structuring dynamic real-time optimization schemes. Computers and Chemical Engineering, 51, 172-180. Lien externe
Bordes-Richard, E., & Patience, G. S. (septembre 2013). Scaling-up the oxidation of n-butane to maleic anhydride on VPO catalyst : oxocapacity vs. catalytic performance [Communication écrite]. 11th European Congress on Catalysis (EuropaCat-XI), Lyon, France. Non disponible
Bouffard, J., Bertrand, F., Chaouki, J., & Dumont, H. (2013). Discrete element investigation of flow patterns and segregation in a spheronizer. Computers and Chemical Engineering, 49, 170-182. Lien externe
Bouffard, J., Cabana, A., Chaouki, J., & Bertrand, F. (2013). Experimental investigation of the effect of particle cohesion on the flow dynamics in a spheronizer. AICHE Journal, 59(5), 1491-1501. Lien externe
Boulay, A.-M. (2013). Développement méthodologique et application du concept de l'empreinte eau en ACV [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Boulay, A.-M., Hoekstra, A. Y., & Vionnet, S. (2013). Complementarities of water-focused life cycle assessment and water footprint assessment. Environmental Science and Technology, 47(21), 11926-11927. Lien externe
Bourgault, G. (2013). Gestion de l'incertitude causée par l'incohérence d'échelle spatiale à l'interface de l'inventaire et de l'analyse des impacts en ACV [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Brandão, M., Levasseur, A., Kirschbaum, M. U. F., Weidema, B. P., Cowie, A. L., Jørgensen, S. V., Hauschild, M. Z., Pennington, D. W., & Chomkhamsri, K. (2013). Key issues and options in accounting for carbon sequestration and temporary storage in life cycle assessment and carbon footprinting. International Journal of Life Cycle Assessment, 18(1), 230-40. Lien externe
Bui, A., & Virgilio, N. (2013). Tuning organogel properties by controlling the organic-phase composition. Industrial & Engineering Chemistry Research, 52(39), 14185-14191. Lien externe
Buschmann, M. D., Merzouki, A., Lavertu, M., Thibault, M., Jean, M., & Darras, V. (2013). Chitosans for delivery of nucleic acids. Advanced Drug Delivery Reviews, 65(9), 1234-1270. Lien externe
Cercle, C., Sarazin, P., & Favis, B. D. (2013). High performance polyethylene/thermoplastic starch blends through controlled emulsification phenomena. Carbohydrate Polymers, 92(1), 138-148. Lien externe
Chambost, V., Clerc, F., & Stuart, P. R. (mai 2013). Assessing Business Strategies for the Forest Biorefinery [Présentation]. Dans 63rd Canadian Society for Chemical Engineering (CSChE) Conference, Fredericton, NB, Canada. Non disponible
Changoor, A., Hoba, M., Garon, M., Quenneville, E., Gordon, K., Buschmann, M. D., Savard, P., & Hurtig, M. B. (2013). Electroarthrography Provides a Non-Invasive Streaming Potential-Based Method for Detecting Natural and Trypsin-Induced Cartilage Degeneration in Equine Fetlock Joints. Osteoarthritis and Cartilage, 21, S103-S103. Lien externe
Chattopadhyahya, B., Sanon, N. T., Dominique, D. B., Lavertu, M., Berryer, M., Desgent, S., Salam, T., Carmant, L., & Dicristo, G. (juin 2013). Hypoxia-Induced Seizures Affect Interneuronal Network Maturation in the Mouse Hippocampus and Neocortex [Communication écrite]. 30th International Epilepsy Congress, Montréal, Canada. Publié dans Epilepsia, 54(S3). Lien externe
Chen, H. M., Chevrier, A., Hoemann, C. D., Sun, J., Picard, G., & Buschmann, M. D. (2013). Bone Marrow Stimulation of the Medial Femoral Condyle Produces Inferior Cartilage and Bone Repair Compared to the Trochlea in a Rabbit Surgical Model. Journal of Orthopaedic Research, 31(11), 1757-1764. Lien externe
Chen, H., Chevrier, A., Hoemann, C. D., Sun, J., Lascau-Coman, V., & Buschmann, M. D. (2013). Bone Marrow Stimulation Induces Greater Chondrogenesis in Trochlear Vs Condylar Cartilage Defects in Skeletally Mature Rabbits. Osteoarthritis and Cartilage, 21(7), 999-1007. Lien externe
Chew, I. M. L., Foo, D. C. Y., Bonhivers, J.-C., Stuart, P. R., Alva-Argaez, A., & Savulescu, L. E. (2013). A model-based approach for simultaneous water and energy reduction in a pulp and paper mill. Applied Thermal Engineering, 51(1-2), 393-400. Lien externe
Chioua, M., Samadi, A., Soriano Santamaria, E., Marco Contelles, J. L., Oset Gasque, M. J., & Alcazar Gonzalez, A. (2013). Quinolyl nitrones. [Quinolyle nitrones]. (Demande de brevet no WO2013017715). Lien externe
Cicoira, F., & Santato, C. (édit.) (2013). Organic Electronics: Emerging Concepts and Technologies. Lien externe
Claeyssen, É., Dorion, S., Clendenning, A., He, J. Z., Wally, O., Chen, J., Auslender, E. L., Moisan, M.-C., Jolicoeur, M., & Rivoal, J. (2013). The futile cycling of hexose phosphates could account for the fact that hexokinase exerts a high control on glucose phosphorylation but not on glycolytic rate in transgenic potato (solanum tuberosum) roots. PLOS One, 8(1), e53898. Disponible
Contreras-Garcia, A., Merhi, Y., Ruiz, J. C., Wertheimer, M. R., & Hoemann, C. D. (2013). Thromboelastography (Teg) Cups and Pins With Different PECVD Coatings: Effect on the Coagulation Cascade in Platelet-Poor Blood Plasma. Plasma Processes and Polymers, 10(9), 817-828. Lien externe
Coronado, J. D. (2013). Monitoring System for the Online Estimation of the Internal Parameters of a Microbial Fuel Cell Operated Intermittently [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Coronado, J., Perrier, M., & Tartakovsky, B. (2013). Pulse-width modulated external resistance increases the microbial fuel cell power output. Bioresource Technology, 147, 65-70. Lien externe
Coronado, J., Tartakovsky, B., & Perrier, M. (décembre 2013). On-line Monitoring and Parameter Estimation of a Microbial Fuel Cell Operated with Intermittent Connection of the External Resistor [Communication écrite]. 12th IFAC Symposium on Computer Applications in Biotechnology, Mumbai, India. Publié dans IFAC Proceedings Volumes, 46(31). Lien externe
Dansereau, L. P. (2013). Cadre de planification intégrée de la chaîne logistique pour la gestion et l'évaluation de stratégies de bioraffinage forestier [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Dansereau, L. P., El-Halwgi, M. M., & Stuart, P. R. (2013). Value chain management considerations for the biorefinery. Dans Integrated biorefineries : design, analysis and optimization (p. 195-250). Lien externe
Dewasme, L., Goffaux, G., Hantson, A. L., & Vande Wouwer, A. (2013). Experimental Validation of an Extended Kalman Filter Estimating Acetate Concentration in E. Coli Cultures. Journal of Process Control, 23(2), 148-157. Lien externe
Diffo, C., & Stuart, P. R. (octobre 2013). Economically-viable Lignin-based Biorefinery [Présentation]. Dans 63rd Canadian Society for Chemical Engineering (CSChE) Conference, Fredericton, NB, Canada. Non disponible
Diffo, C., & Stuart, P. R. (janvier 2013). Lignin Biorefinery Technology and Markets: The Master and the Slave [Présentation]. Dans Value Chain Optimization (VCO) Network Lecture Series. Non disponible
Dini, M. (2013). Improvement of Barrier Properties of Poly(Ethylene Terephthalate)/Organoclay Nanocomposites [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Dion, L., Kiss, L., Chartrand, P., Dufour, G., & Laflamme, F. (mars 2013). Sodium content in aluminum and current efficiency - Correlation through multivariate analysis [Communication écrite]. Light Metals 2012 - TMS 2013 Annual Meeting and Exhibition, San Antonio, TX, United states. Lien externe
Dorval Dion, C. A. (2013). Déposition photochimique du gaz de synthèse (CO et H2) pour la fonctionnalisation en surface à conditions ambiantes [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Dorval Dion, C.-A., & Tavares, J. R. (2013). Photo-initiated chemical vapor deposition as a scalable particle functionalization technology (a practical review). Powder Technology, 239, 484-491. Disponible
Dorval-Dion, C. A., & Tavares, J. R. (mai 2013). Experimental investigation of photo-initiated chemical vapor deposition (PICVD) as a potential scalable nanoparticle functionalization technology [Communication écrite]. Surfaces Canada 2013, London, Ontario. Lien externe
Dorval-Dion, C. A., Raphael, W., & Tavares, J. R. (mars 2013). PICVD as a viable alternative for the low-cost and scalable surface functionalization of nanoparticles [Communication écrite]. McGill-Polytechnique Chemical Engineering Research Day, Montréal, Québec. Non disponible
Douieb, S., Fradette, L., & Bertrand, F. (octobre 2013). Impeller geometry effect on the growth rate of CO₂ gas hydrates in agitated vessels [Communication écrite]. 63rd CSChE Annual Conference, Fredericton, NB, Canada. Non disponible
Douieb, S., Fradette, L., Bertrand, F., & Haut, B. (août 2013). Impeller geometry effect on the growth rate of CO₂ gas hydrates in agitated vessels [Communication écrite]. 9th world Congress of Chemical Engineering (WEEC9), Seoul, Korea. Non disponible
Dubé, O. (2013). Dynamique particulaire dans des lits fixes et rotatifs [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Dube, O., Alizadeh, E., Chaouki, J., & Bertrand, F. (2013). Dynamics of non-spherical particles in a rotating drum. Chemical Engineering Science, 101, 486-502. Lien externe
Dubois, J.-L., & Patience, G. S. (2013). Method for the reactive vaporization of glycerol. (Brevet no US8530697). Lien externe
Dubrawski, K., Tebianian, S., Bi, H. T., Chaouki, J., Ellis, N., Gerspacher, R., Jafari, R., Kantzas, A., Lim, C., Patience, G. S., Pugsley, T., Qi, M. Z., Zhu, J. X., & Grace, J. R. (2013). Traveling column for comparison of invasive and non-invasive fluidization voidage measurement techniques. Powder Technology, 235, 203-220. Lien externe
Durand, S. (2013). Mise en oeuvre des propulsifs multicouches en filières concentriques [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
E. Cabana, A. (2013). Modélisation numérique d'écoulements de particules cohésives par la méthode des éléments discrets [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Ebrahimpour, O. (2013). Fabrication of Mullite-Bonded Porous SiC Ceramics from Multilayer-Coated SiC Particles Through Sol-Gel and In-Situ Polymerization Techniques [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Ebrahimpour, O., Chaouki, J., & Dubois, C. (2013). Diffusional effects for the oxidation of SiC powders in thermogravimetric analysis experiments. Journal of Materials Science, 48(12), 4396-4407. Lien externe
Eriksson, G., Bale, C. W., & Pelton, A. (2013). Interpretation and calculation of first-melting projections of phase diagrams. Journal of Chemical Thermodynamics, 67, 63-73. Lien externe
Esmaeili, B., Dubois, C., Carreau, P., & Heuzey, M.-C. (2013). In situ polymerization of PET in the presence of pristine and organo-modified clays. International Polymer Processing, 28(3), 331-340. Lien externe
Esmaeilzadeh Azar, F., & Perrier, M. (juillet 2013). Extension of the global optimization using multi-unit extremum seeking control for noisy scalar systems [Communication écrite]. 2013 European Control Conference (ECC), Zürich, Switzerland. Lien externe
Esquirol, A.-L. (2013). Contrôle de la morphologie d'hydrogels poreux à partir de structures polymères [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Farag, S. (2013). Production of Chemicals by Microwave Thermal Treatment of Lignin [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Farag, S., & Chaouki, J. (mai 2013). Microwave pyrolysis of lignin [Communication écrite]. 1st FIBER (Forest Innovations by Research and Education) Network Conference, Cornwall, Ont.. Non disponible
Fatemi Emamgheis, F. (2013). A Novel Methodology for the Assessment of the Direct and Indirect Impacts Associated with the Depletion of Fossil Resources in Life Cycle Assessment [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Filion, D., & Buschmann, M. D. (2013). Chitosan-glycerol-phosphate (GP) gels release freely diffusible GP and possess titratable fixed charge. Carbohydrate Polymers, 98(1), 813-819. Lien externe
Fontaine, A., Guntzburger, Y., Bertrand, F., Fradette, L., & Heuzey, M.-C. (2013). Experimental investigation of the flow dynamics of rheologically complex fluids in a maxblend impeller system using PIV. Chemical Engineering Research and Design, 91(1), 7-17. Lien externe
Fortier, C., De Crescenzo, G., & Durocher, Y. (2013). A versatile coiled-coil tethering system for the oriented display of ligands on nanocarriers for targeted gene delivery. Biomaterials, 34(4), 1344-1353. Lien externe
Fotovat, F. (2013). Characterization of Hydrodynamics and Solids Mixing in Fluidized Beds Involving Biomass [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Fotovat, F., & Chaouki, J. (mai 2013). Effect of irregular particles immersed in a bed of sand on the fluidization characteristics of the bed inventory [Communication écrite]. Fluidization XIV From Fundamentals to Products, Noordwijkerhout, Netherlands. Non disponible
Fotovat, F., & Chaouki, J. (mai 2013). On the effect of biomass concentration on the flow pattern and mixing state of fluidizing mixtures containing biomass [Communication écrite]. Fluidization XIV From Fundamentals to Products, Noordwijkerhout, Netherlands. Non disponible
Fotovat, F., Chaouki, J., & Bergthorson, J. (2013). The Effect of Biomass Particles on the Gas Distribution and Dilute Phase Characteristics of Sand-Biomass Mixtures Fluidized in the Bubbling Regime. Chemical Engineering Science, 102, 129-138. Lien externe
Fradette, L., & Bertrand, F. (2013). Reply to Comments on 'an Experimental Method to Evaluate Global Pumping in a Mixing System: Application to the Maxblendtm for Newtonian and Non-Newtonians Fluids' [Commentaire ou lettre]. Chemical Engineering Journal, 229, 597-597. Lien externe
Ghanbari, A., Heuzey, M.-C., Carreau, P., & Ton-That, M. T. (2013). A novel approach to control thermal degradation of PET/organoclay nanocomposites and improve clay exfoliation. Polymer, 54(4), 1361-1369. Lien externe
Ghanbari, A., Heuzey, M.-C., Carreau, P., & Ton-That, M.-T. (2013). Morphological and Rheological Properties of Pet/Clay Nanocomposites. Rheologica Acta, 52(1), 59-74. Lien externe
Ghanbari, A., Heuzey, M.-C., Carreau, P., & Ton-That, M.-T. (2013). Morphology and properties of polymer/organoclay nanocomposites based on poly(ethylene terephthalate) and sulfopolyester blends. Polymer International, 62(3), 439-448. Lien externe
Gheribi, A. E., & Chartrand, P. An in silico method to predict the thermal conductivity in insulating crystals [Communication écrite]. 31st International Thermal Conductivity Conference (Thermal Conductivity 31), Chicoutimi, Québec, Canada. Lien externe
Gheribi, A. E., Le Digabel, S., Audet, C., & Chartrand, P. (2013). Identifying optimal conditions for magnesium based alloy design using the Mesh Adaptive Direct Search algorithm. Thermochimica Acta, 559, 107-110. Lien externe
Ghodratnama, M. (2013). Dynamics, Control and Extremum Seeking of the Rectisol Process [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Ghorbaniaghdam, A. (2013). Development of a Dynamic Model to Describe CHO cells Metabolic Network and Regulation [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Ghorbaniaghdam, A., Henry, O., & Jolicoeur, M. (2013). A kinetic-metabolic model based on cell energetic state: study of CHO cells behaviour under Na-butyrate stimulation. Bioprocess and Biosystems Engineering, 36(4), 469-487. Lien externe
Gilani, B., & Stuart, P. R. (mai 2013). Mitigating Risk Through Phased Biorefinery Implementation [Présentation]. Dans 63rd Canadian Society for Chemical Engineering (CSChE) Conference, Fredericton, NB, Canada. Non disponible
Grmela, M. (2013). Extensions of nondissipative continuum mechanics toward complex fluids and complex solids. Continuum Mechanics and Thermodynamics, 25(1), 55-75. Lien externe
Grmela, M. (juillet 2013). Multiscale dynamics and thermodynamics in spaces equipped with contact structure [Communication écrite]. 1st IFAC Workshop on Thermodynamic Foundations of Mathematical Systems Theory (TFMST 2013), Lyon, France. Lien externe
Grmela, M. (2013). Role of thermodynamics in multiscale physics. Computers and Mathematics with Applications, 65(10), 1457-1470. Lien externe
Grmela, M., & Ottinger, H. C. (2013). The 6th international workshop on nonequilibrium thermodynamics. Journal of Non-Newtonian Fluid Mechanics, 194, 60-61. Lien externe
Grmela, M., Ammar, A., & Chinesta, F. (2013). One and two-fiber orientation kinetic theories of fiber suspensions. Journal of Non-Newtonian Fluid Mechanics, 200, 17-33. Lien externe
Grmela, M., Grazzini, G., Lucia, U., & Yahia, L. (2013). Multiscale Mesoscopic Entropy of Driven Macroscopic Systems. Entropy, 15(11), 5053-5064. Disponible
Grmela, M., Maîtrejean, G., Chinesta, F., & Ammar, A. (2013). Kinetic Theory of Colloidal Suspensions: Morphology, Rheology, and Migration. Rheologica Acta, 52(6), 557-577. Lien externe
Guntzburger, Y., Fontaine, A., Fradette, L., & Bertrand, F. (2013). An experimental method to evaluate global pumping in a mixing system : application to the Maxblendᵗᵐ for newtonian and non-newtonian fluids. Chemical Engineering Journal, 214(1), 394-406. Lien externe
Guo, S. Z., Heuzey, M.-C., & Therriault, D. (juillet 2013). Solvent-cast direct-write microfabrication of thermoplastic-based nanocomposite structures [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe
Guo, S., Gosselin, F., Guérin, N., Lanouette, A.-M., Heuzey, M.-C., & Therriault, D. (2013). Solvent-cast three-dimensional printing of multifunctional microsystems. Small, 9(24), 4118-4122. Disponible
Hadjizadeh, A., Ajji, A., Jolicoeur, M., Liberelle, B., & De Crescenzo, G. (2013). Effects of electrospun nanostructure versus microstructure on human aortic endothelial cell behavior. Journal of Biomedical Nanotechnology, 9(7), 1195-1209. Lien externe
Hamidan, A., Sarshar, Z., & Stuart, P. R. (mai 2013). Techno-Economic Evaluation of Biomass Biodrying Integrated into Thermochemical Processes [Présentation]. Dans 63rd Canadian Society for Chemical Engineering (CSChE) Conference, Fredericton, NB, Canada. Non disponible
Harvey, J.-P., Eriksson, G., Orban, D., & Chartrand, P. (2013). Global Minimization of the Gibbs Energy of Multicomponent Systems Involving the Presence of Order/Disorder Phase Transitions. American Journal of Science, 313(3), 199-241. Lien externe
Hébert, J.-S., Wood-Adams, P., Heuzey, M.-C., Dubois, C., & Brisson, J. (2013). Morphology of polylactic acid crystallized during annealing after uniaxial deformation. Journal of Polymer Science, Part B: Polymer Physics, 51(6), 430-440. Lien externe
Hoemann, C. D., Gosselin, Y., Chen, H., Sun, J., Hurtig, M. B., Carli, A., & Stanish, W. D. (2013). Characterization of initial microfracture defects in human condyles. Journal of Knee Surgery, 26(5), 347-356. Lien externe
Hoemann, C. D., Guzmán-Morales, J., Tran-Khanh, N., Lavallée, G., Jolicoeur, M., & Lavertu, M. (2013). Chitosan rate of uptake in HEK293 cells is influenced by soluble versus microparticle state and enhanced by serum-induced cell metabolism and lactate-based media acidification. Molecules, 18(1), 1015-1035. Disponible
Hytönen, E., & Stuart, P. R. (2013). Techno-economic assessment and risk analysis of biorefinery processes. Dans Integrated biorefineries : design, analysis and optimization (p. 59-92). Lien externe
Imbeault-Tetreault, H., Jolliet, O., Deschênes, L., & Rosenbaum, R. K. (2013). Analytical propagation of uncertainty in life cycle assessment using matrix formulation. Journal of Industrial Ecology, 17(4), 485-492. Lien externe
Jeaidi, J., & Stuart, P. R. (mai 2013). Advanced Profitability Analysis of Biorefinery Capacity at Integrated Newsprint Mills [Présentation]. Dans 63rd Canadian Society for Chemical Engineering (CSChE) Conference, Fredericton, NB, Canada. Non disponible
Jean, S., Sarshar, Z., Lebel, L., & Stuart, P. R. (mai 2013). Assessing Environmental Priorities for the Forest Biorefinery [Présentation]. Dans 63rd Canadian Society for Chemical Engineering (CSChE) Conference, Fredericton, NB, Canada. Non disponible
Jin, L., Kevorkov, D., Medraj, M., & Chartrand, P. (2013). Al-Mg-RE (RE = La, Ce, Pr, Nd, Sm) systems: Thermodynamic evaluations and optimizations coupled with key experiments and Miedema's model estimations. Journal of Chemical Thermodynamics, 58, 166-195. Lien externe
Kamaraju, V. K., Srinivasan, B., & Chiu, M. S. (juillet 2013). NCO-tracking based control of semi-batch antisolvent crystallization processes in the presence of uncertainties [Communication écrite]. 2013 European Control Conference (ECC), Zürich, Switzerland. Lien externe
Kang, Y.-B., & Pelton, A. (2013). The shape of liquid miscibility gaps and short-range-order. Journal of Chemical Thermodynamics, 60, 19-24. Lien externe
Keshtkar, M. J. (2013). Steam and Water Combined Analysis, Integration, and Efficiency Enhancement in Kraft Pulping Mills [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Khaksar Toroghi, M., Goffaux, G., & Perrier, M. (2013). Observer-based backstepping controller for microalgae cultivation. Industrial and Engineering Chemistry Research, 52(22), 7482-7491. Lien externe
Kim, W.-Y., Pelton, A., Bale, C. W., Bélisle, E., & Decterov, S. (2013). Modeling the viscosity of silicate melts containing manganese oxide. Journal of Mining and Metallurgy, Section B: Metallurgy, 49(3), 323-337. Disponible
Klika, V., & Grmela, M. (2013). Coupling between chemical kinetics and mechanics that is both nonlinear and compatible with thermodynamics. Physical Review E - Statistical, Nonlinear, and Soft Matter Physics, 87(1). Lien externe
Koellner, T., de Baan, L., Beck, T., Brandão, M., Civit, B., Margni, M., Milà i Canals, L., Saad, R., de Souza, D. M., & Müller-Wenk, R. (2013). UNEP-SETAC guideline on global land use impact assessment on biodiversity and ecosystem services in LCA. The International Journal of Life Cycle Assessment, 18(6), 1188-1202. Disponible
Korbel, M., & Stuart, P. R. (2013). Cost integration methodology and the forest biorefinery. Dans Integrated biorefineries : design, analysis and optimization (p. 129-156). Lien externe
Kounina, A., Margni, M., Bayart, J.-B., Boulay, A.-M., Berger, M., Bulle, C., Frischknecht, R., Koehler, A., Milà i Canals, L., Motoshita, M., Núñez, M., Peters, G., Pfister, S., Ridoutt, B., van Zelm, R., Verones, F., & Humbert, S. (2013). Review of methods addressing freshwater use in life cycle inventory and impact assessment. The International Journal of Life Cycle Assessment, 18(3), 707-721. Disponible
Lafantaisie-Favreau, C.-H., Guzmán-Morales, J., Sun, J., Chen, G., Harris, A., Smith, T. D., Carli, A., Henderson, J., Stanish, W. D., & Hoemann, C. D. (2013). Subchondral pre-solidified chitosan/blood implants elicit reproducible early osteochondral wound-repair responses including neutrophil and stromal cell chemotaxis, bone resorption and repair, enhanced repair tissue integration and delayed matrix deposition. BMC Musculoskeletal Disorders, 14(1). Disponible
Lalande, J. (2013). Détermination de l'impact du pentachlorophénol sur la diversité bactérienne dans les sols à partir de la technique de l'électrophorèse sur gel en gradient dénaturant [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Lalande, J., Villemur, R., & Deschênes, L. (2013). A New Framework to Accurately Quantify Soil Bacterial Community Diversity From DGGE. Microbial Ecology, 66(3), 647-658. Lien externe
Lambotte, G., & Chartrand, P. (mars 2013). A thermodynamic approach to the corrosion of the cathode refractory lining in aluminium electrolysis cell: Modelling of the Al2O 3-Na2O-SiO2-AlF3-NaF-SiF 4 system [Communication écrite]. Light Metals 2012 - TMS 2013 Annual Meeting and Exhibition, San Antonio, TX, United states. Lien externe
Lambotte, G., & Chartrand, P. (2013). Thermodynamic modeling of the (Al2O3 + Na 2O), (Al2O3 + Na2O + SiO 2), and (Al2O3 + Na2O + AlF 3 + NaF) systems. Journal of Chemical Thermodynamics, 57, 306-334. Lien externe
Lanteigne, J.-R., Laviolette, J.-P., & Chaouki, J. (2013). Biomass Pre-Treatments for Biorefinery Applications: Pyrolysis. Dans Pretreatment Techniques for Biofuels and Biorefineries (p. 229-260). Lien externe
Lanteigne, J.-R., Laviolette, J.-P., Tremblay, G., & Chaouki, J. (2013). Predictive kinetics model for an industrial waste tire pyrolysis process. Energy and Fuels, 27(2), 1040-1049. Lien externe
Latifi, M., & Chaouki, J. (juin 2013). The Mini Induction Heating Reactor [Affiche]. Carbon Management Canada, Calgary, Alberta. Non disponible
Latifi, M., & Chaouki, J. (juin 2013). A new inductively heated mini reactor for biomass pyrolysis and gasification tests [Communication écrite]. Bioenergy IV: Innovations in Biomass Conversion for Heat & Power, Fuels and Chemicals, Otranto, Italy. Non disponible
Latifi, M., Berruti, F., & Briens, C. (mai 2013). The Jiggled Bed Reactor, A New Fluidized Bed Reactor for Catalyst Testing [Communication écrite]. Fluidization XIV: from Fundamentals to Products, Noordwijkerhout, The Netherlands. Non disponible
Laviolette, J.-P., Patience, G. S., La Marca, C., & Chaouki, J. (2013). Gas-phase propane combustion in the freeboard of a fluidized bed. Fuel, 111, 316-323. Lien externe
Lebailly, F. (2013). Application d'une méthode d'analyse du cycle de vie dynamique pour l'évaluation de l'impact toxique des métaux [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Lerouge, S., Thalla, P., Lequoy, P., Fadlallah, H., Liberelle, B., Savoji, H., Wertheimer, M. R., De Crescenzo, G., & Merhi, Y. (septembre 2013). Bioactive coatings with low-fouling non-thrombogenic but cell-adhesive properties, using chondroitin sulphate [Communication écrite]. 4th International Symposium on Surface and Interface of Biomaterials (ISSIB 2013), Roma, Italy. Publié dans European Cells and Materials, 26(6). Non disponible
Lesage, P., & Samson, R. (2013). The Québec Life Cycle Inventory Database Project. International Journal of Life Cycle Assessment, 21(9), 1282-1289. Lien externe
Lessard, I. (2013). Détermination de la toxicité à long-terme du zinc sur la diversité fonctionnelle enzymatique de sols contaminés collectés sur le terrain [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Lessard, I., Renella, G., Sauvé, S., & Deschênes, L. (2013). Metal toxicity assessment in soils using enzymatic activity : can water be used as a surrogate buffer? Soil Biology and Biochemistry, 57, 256-263. Lien externe
Levasseur, A., Lesage, P., Margni, M., & Samson, R. (2013). Biogenic Carbon and Temporary Storage Addressed With Dynamic Life Cycle Assessment. Journal of Industrial Ecology, 17(1), 117-128. Lien externe
Liberelle, B., Merzouki, A., & De Crescenzo, G. (2013). Immobilized Carboxymethylated Dextran Coatings for Enhanced ELISA. Journal of Immunological Methods, 389(1-2), 38-44. Lien externe
Lindberg, D., Backman, R., Chartrand, P., & Hupa, M. (2013). Towards a Comprehensive Thermodynamic Database for Ash-Forming Elements in Biomass and Waste Combustion - Current Situation and Future Developments. Fuel Processing Technology, 105, 129-141. Lien externe
Maani, A., Naguib, H. E., Heuzey, M.-C., & Carreau, P. (2013). Foaming behavior of microcellular thermoplastic olefin blends. Journal of Cellular Plastics, 49(3), 223-244. Lien externe
Manneh, R., Margni, M., Rosenbaum, R., & Deschênes, L. (mai 2013). Exploring parameter uncertainty and seasonal variability for human health intake fractions in life cycle assessment [Résumé]. SETAC Europe 23rd Annual Meeting, Glasgow, U.K. (4 pages). Lien externe
Mansoornejad, B., & Stuart, P. R. (2013). Forest biorefinery supply chain design and process flexibility. Dans Integrated biorefineries : design, analysis and optimization (p. 283-324). Lien externe
Mansoornejad, B., & Stuart, P. R. (mai 2013). Key Success Factors for Designing the Sustainable Biorefinery: Delivering Added-Value Products Via a Unique Supply Chain [Présentation]. Dans 63rd Canadian Society for Chemical Engineering (CSChE) Conference, Fredericton, NB. Non disponible
Mansoornejad, B., & Stuart, P. R. (mai 2013). Strategic Decision-Making for Biorefinery Implementation Using a Supply-Chain Analysis [Affiche]. Forest Innovation by Research & Education (FIBRE), Cornwall, ON, Canada. Non disponible
Mansoornejad, B., Pistikopoulos, E. N., & Stuart, P. R. (2013). Metrics for evaluating the forest biorefinery supply chain performance. Computers and Chemical Engineering, 54, 125-139. Lien externe
Mansoornejad, B., Pistikopoulos, E. N., & Stuart, P. R. (2013). Scenario-based strategic supply chain design and analysis for the forest biorefinery using an operational supply chain model. International Journal of Production Economics, 144(2), 618-634. Lien externe
Mansoornejad, B., Sanaei, S., & Stuart, P. R. (juin 2013). Application of Process Systems Engineering Tools in Designing the Biorefinery [Présentation]. Dans European Symposium on Computer Aided Process Engineering (ESCAPE 23), Lappeenranta, Finland. Non disponible
Mariano, A. P., Dias, M. O. S., Junqueira, T. L., Cunha, M. P., Bonomi, A., & Maciel Filho, R. (2013). Utilization of Pentoses From Sugarcane Biomass: Techno-Economics of Biogas Vs. Butanol Production. Bioresource Technology, 142, 390-399. Lien externe
Mariano, A. P., Harlin, A., Manninen, J., Chambost, V., & Stuart, P. R. (2013). Techno-economic analysis of process alternatives for the production of ethylene-propylene rubber from forest-based feedstocks. Tappi Journal, 12(1), 19-32. Lien externe
Martin, E., Savadogo, O., Guiot, S. R., & Tartakovsky, B. (2013). Electrochemical Characterization of Anodic Biofilm Development in a Microbial Fuel Cell. Journal of Applied Electrochemistry, 43(5), 533-540. Lien externe
Matet, M., Heuzey, M.-C., Pollet, E., Ajji, A., & Avérous, L. (2013). Innovative thermoplastic chitosan obtained by thermo-mechanical mixing with polyol plasticizers. Carbohydrate Polymers, 95(1), 241-251. Lien externe
Mathieu, C., Chevrier, A., Lascau-Coman, V., Rivard, G. E., & Hoemann, C. D. (2013). Stereo Logical Analysis of Subchondral Angiogenesis Induced by Chitosan and Coagulation Factors in Microdrilled Articular Cartilage Defects. Osteoarthritis and Cartilage, 21(6), 849-859. Lien externe
Mcdade, J. K., Brennan-Pierce, E. P., Ariganello, M. B., Labow, R. S., & Lee, J. M. (2013). Interactions of U937 Macrophage-Like Cells With Decellularized Pericardial Matrix Materials: Influence of Crosslinking Treatment. Acta Biomaterialia, 9(7), 7191-7199. Lien externe
Mehrotra, A. K., Patience, G. S., & Svrcek, W. Y. (2013). Calculation of gas solubility in Wabasca bitumen. Journal of Canadian Petroleum Technology, 28(03). Lien externe
Mélendez, J., & Stuart, P. R. (mai 2013). Biomass Supply Chain Optimization for Commodity and Value-added Biorefinery Products [Présentation]. Dans Forest Innovation by Research & Education (FIBRE) Conference, Cornwall, ON, Canada. Non disponible
Melendez, J., Lebel, L., & Stuart, P. R. (2013). A literature review of biomass feedstocks for a biorefinery. Dans Integrated biorefineries : design, analysis and optimization (p. 433-460). Lien externe
Mendez-Portillo, L. S., Heniche, M., Dubois, C., & Tanguy, P. A. (2013). Numerical investigation of the hydrodynamics of split-and-recombination and multilamination microreactors. AICHE Journal, 59(3), 988-1001. Lien externe
Merzouki, A., & Buschmann, M. D. (2013). Gene therapy for diabetes with chitosan-delivered plasmid encoding glucagon-like peptide 1. (Demande de brevet no US20130210717). Lien externe
Mirzadeh, A., Lafleur, P., Kamal, M. R., & Dubois, C. (2013). Morphology Evolution and Thermomechanical Characteristics of Tpv Nanocomposites Based on Pp/Epdm Prepared by Reactive Extrusion. Rubber Chemistry and Technology, 86(4), 521-537. Lien externe
Mohammadi, S. S., Mariano, A., Diffo, C., & Stuart, P. R. (mai 2013). Experience Curve Methodology for Biorefinery Evaluation [Présentation]. Dans 63rd Canadian Society for Chemical Engineering (CSChE) Conference, Fredericton, NB, Canada. Non disponible
Moshkelani, M., Marinova, M., Perrier, M., & Paris, J. (2013). The Forest Biorefinery and Its Implementation in the Pulp and Paper Industry: Energy Overview. Applied Thermal Engineering, 50(2), 1427-1436. Lien externe
Mostafa, A. O., Gheribi, A. E., Kevorkov, D., Mezbahul-Islam, M., & Medraj, M. (2013). Experimental investigation and first-principle calculations coupled with thermodynamic modeling of the Mn-Nd phase diagram. CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry, 42, 27-37. Lien externe
Murschel, F., Liberelle, B., St-Laurent, G., Jolicoeur, M., Durocher, Y., & De Crescenzo, G. (2013). Coiled-Coil-Mediated Grafting of Bioactive Vascular Endothelial Growth Factor. Acta Biomaterialia, 9(6), 6806-6813. Lien externe
Najafi, N., Heuzey, M.-C., & Carreau, P. (2013). Crystallization behavior and morphology of polylactide and PLA/clay nanocomposites in the presence of chain extenders. Polymer Engineering and Science, 53(5), 1053-1064. Lien externe
Nasiri, A. M., Chartrand, P., Weckman, D. C., & Zhou, N. Y. (2013). Thermochemical analysis of phases formed at the interface of a Mg alloy-Ni-plated steel joint during laser brazing. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 44(4), 1937-1946. Lien externe
Navarri, P., & Stuart, P. R. (mars 2013). Practical Energy Analysis Needs of the Forest Products Sector [Présentation]. Dans International Process Integration Jubilee Conference, Göteborg, Sweden. Lien externe
Noel, S., Liberelle, B., Yogi, A., Moreno, M. J., Bureau, M., Robitaille, L., & De Crescenzo, G. (2013). A non-damaging chemical amination protocol for poly(ethylene terephthalate)-application to the design of functionalized compliant vascular grafts. Journal of Materials Chemistry B, 1(2), 230-238. Lien externe
Norouzi, H. R., Azizpour, H., Zarghani, R., Chaouki, J., & Mostoufi, N. (juillet 2013). Frequency domain analysis of BF with vibration times series of the bed wall [Communication écrite]. 2nd International Conference on Advances in Mechanics Engineering (ICAME 2013), Djakarta, Indonesia. Publié dans Applied Mechanics and Materials, 391. Lien externe
Oishi, K., & Savadogo, O. (2013). Correlation between the physico-chemical properties and the oxygen reduction reaction electro catalytic activity in acid medium of Pd-Co alloys synthesized by ultrasonic spray method. Electrochimica Acta, 98, 225-238. Lien externe
Oishi, K., & Savadogo, O. (2013). Electrochemical investigation of Pd-Co thin films binary alloy for the oxygen reduction reaction in acid medium. Journal of Electroanalytical Chemistry, 703, 108-116. Lien externe
Olmiccia, J. (2013). Développement d'outils d'évaluation de la distribution des temps de séjour et de génération de maillages pour la modélisation de l'écoulement de fluides dans des mélangeurs continus [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Ouedraogo, B. (2013). Développement de couches absorbantes à base de composites Al2O3-NiO pour des applications en énergie solaire thermique [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Owens, R., Kjall, P., Titcher-Dahifors, A., & Cicoira, F. (2013). Organic bioelectronics - novel applications in biomedicine. Biochimica et Biophysica Acta (BBA) -General Subjects, 1830(9), 4283-4285. Lien externe
Paek, L. S., Tétreault-Paquin, J. O., St-Jacques, S., Nelea, M. I., & Danino, M. A. (2013). Is Environmental Scanning Electron Microscopy a Pertinent Tool for the Analysis of Periprostethic Breast Capsules? [Le microscope électronique à balayage environnemental est-il un outil pertinent pour l’analyse des capsules périprothétiques mammaires ?]. Annales De Chirurgie Plastique Esthetique, 58(3), 201-207. Lien externe
Patel, J. D., Mighri, F., Ajji, A., & Chaudhuri, T. K. (2013). Fatty Acid-Assisted Synthesis of Cds Microspheres: Physicochemical Properties and Photocatalytic Activity. Materials Letters, 110, 94-97. Lien externe
Patience, G. S. (2013). Experimental methods and instrumentation for chemical engineers. Lien externe
Patience, G. S., Benamer, A., Chiron, F.-X., Shekari, A., & Dubois, J.-L. (2013). Selectively combusting CO in the presence of propylene. Chemical Engineering and Processing : Process Intensification, 70, 162-168. Lien externe
Patience, G. S., Boffito, D. C., Edake, M., & Neagoe, C. (juin 2013). Biodiesel via catalytic gas phase trans-esterification in a fluidized bed [Communication écrite]. BioEnergy IV : Innovations in Biomass Conversion for Heat, Power, Fuels and Chemicals, Otranto, Italy. Non disponible
Pinsonnault, A. (2013). Adaptation d'une base de données pour l'intégration d'un algorithme de résolution d'inventaire en ACV dynamique [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Pinsonnault, A., Muller, S., Levasseur, A., & Samson, R. (juin 2013). Development of an engineering class project incorporating a personal vision of sustainable development teaching [Communication écrite]. 4th annual CEEA/ACEG conference, Montreal, Qc, Canada (5 pages). Lien externe
Pirola, C., Bianchi, C., Di Fronzo, A., Boffito, D. C., Di Michele, A., & Patience, G. S. (avril 2013). Ultrasound and microwave assisted preparation of high Fe loaded supported catalysts for biosyngas Fischer-Tropsch conversion [Communication écrite]. 245th ACS National Meeting and Exposition, New Orleans, Louisiana. Non disponible
Poliquin, P. O., Chen, J., Cloutier, M., Trudeau, L.-É., & Jolicoeur, M. (2013). Metabolomics and in-silico analysis reveal critical energy deregulations in animal models of Parkinson's disease. PLOS One, 8(7). Disponible
Preville, A. M., Lavigne, R., Buschmann, M. D., Hardin, J., Han, Q., Djerroud, L., & Savard, P. (2013). Electroarthrography: a Novel Method to Assess Articular Cartilage and Diagnose Osteoarthritis by Non-Invasive Measurement of Load-Induced Electrical Potentials at the Surface of the Knee. Osteoarthritis and Cartilage, 21(11), 1731-1737. Lien externe
Prostakova, V. (2013). Development of a Thermodynamic Database for Nickel-Containing Oxide Systems for Simulation of Nickel Extraction from Laterite Ores [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Prostakova, V., Chen, J., Jak, E., & Decterov, S. (2013). Experimental study and thermodynamic modeling of the MgO-NiO-SiO 2 system. Journal of Chemical Thermodynamics, 62, 43-55. Lien externe
Puchois, R. (2013). Élaboration d'encres biosourcées pour un procédé industriel de décoration de verres de table [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Rasouli, M., Bertrand, F., & Chaouki, J. (novembre 2013). A multiple radioactive particle tracking technique for mixing applications [Communication écrite]. 2013 AIChE Annual Meeting, San Francisco, CA, USA. Lien externe
Ravati, S., & Favis, B. D. (2013). Interfacial Coarsening of Ternary Polymer Blends With Partial and Complete Wetting Structures. Polymer, 54(25), 6739-6751. Lien externe
Ravati, S., & Favis, B. D. (2013). Tunable morphologies for ternary blends with poly(butylene succinate): Partial and complete wetting phenomena. Polymer (United Kingdom), 54(13), 3271-3281. Lien externe
Reyjal, M., Tavares, J. R., Virgilio, N., & Fradette, L. (2013). Is the Maxwell–Garnett continuum model valid to predict the thermal conductivity of particle-stabilized (Pickering) emulsions? Industrial & Engineering Chemistry Research, 52(13), 4962-4966. Disponible
Richard, I., Thibault, M., De Crescenzo, G., Buschmann, M. D., & Lavertu, M. (2013). Ionization behavior of chitosan and chitosan-DNA polyplexes indicate that chitosan has a similar capability to induce a proton-sponge effect as PEI. Biomacromolecules, 14(6), 1732-1740. Lien externe
Robelin, C., & Chartrand, P. (2013). Thermodynamic evaluation and optimization of the (NaF + AlF₃ + CaF₂ + BeF₂ + Al₂O₃ + BeO) system. Journal of Chemical Thermodynamics, 57, 387-403. Lien externe
Rohani, N. M., Ruis, C. P., Legros, R., & Stuart, P. R. (mai 2013). Role of Process Intensification/Hybrid Systems in Biorefinery Separation Processes [Présentation]. Dans 63rd Canadian Society for Chemical Engineering (CSChE) Conference, Fredericton, NB, Canada. Non disponible
Sadeghi, F., Fereydoon, M., & Ajji, A. (2013). Rheological, mechanical and barrier properties of multilayer nylon/clay nanocomposite film. Advances in Polymer Technology, 32(SUPPL.1), E53-E64. Lien externe
Sadre Bazaz, S. (2013). Multi-Unit Optimization for a System with Multiple Non-Identical Units and Multiple Inputs-Application to Photovoltaic Arrays [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Samih, S., & Chaouki, J. (mai 2013). Development of a fluidized bed TGA [Communication écrite]. Fluidization XIV From Fundamentals to Products, Noordwijkerhout, Netherlands. Non disponible
Sanaei, S., & Stuart, P. R. (septembre 2013). Biorefinery strategy decision-making under uncertainty [Communication écrite]. International Bioenergy and Bioproducts Conference (IBBC 2013), Green Bay, WI, United states. Non disponible
Sanaei, S., & Stuart, P. R. (mai 2013). Retrofit Design Strategic Decision-Making Methodology to Identify Sustainable Integrated Forest Biorefinery Strategies [Présentation]. Dans 63rd Canadian Chemical Engineering (CSChE) Conference, Fredericton, NB. Non disponible
Sanaei, S., Janssen, M., & Stuart, P. R. (2013). LCA-Based Environmental Evaluation of Biorefinery Projects. Dans Integrated biorefineries : design, analysis and optimization (p. 793-816). Lien externe
Sand, G., Chioua, M., Xu, C., Schmidt, W. A., Schlake, J. C., & Horch, A. (2013). System and method for plant wise asset management. [Système et procédé permettant une gestion d'actifs à l'échelle de l'usine]. (Demande de brevet no WO2013041440). Lien externe
Sauriol, P., Cui, H., & Chaouki, J. (2013). Gas jet penetration lengths from upward and downward nozzles in dense gas–solid fluidized beds. Powder Technology, 235, 42-54. Lien externe
Sauvageau-Grenier, E., Farand, P., Tavares, J. R., & Virgilio, N. (juin 2013). Une carte conceptuelle pour le programme de baccalauréat en génie chimique à Polytechnique Montréal [Communication écrite]. Conférence annuelle de l'Association canadienne de l'éducation en génie, Montréal, Québec. Lien externe
Savard, J.-D. (2013). Revue des méthodes évaluant l'impact de l'utilisation de l'eau sur la santé des écosystèmes en analyse du cycle de vie et proposition d'une approche intégratrice [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Sayago, J., Bayatpour, S., Cicoira, F., & Santato, C. (2013). Toward electrolyte-gated organic light-emitting transistors : advances and challenges. Dans Organic electronics : emerging concepts and technologies (p. 215-232). Lien externe
Seguineau de Preval, C. (2013). Vers la simulation d'écoulements turbulents dans un convertisseur catalytique par la méthode de Boltzmann sur réseau [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Shabanian, J., & Chaouki, J. (mai 2013). Pressure Signals in a Gas-Solid Fluidized Bed with Thermally Induced Inter-Particle Forces [Communication écrite]. Fluidization XIV From Fundamentals to Products, Noordwijkerhout, Netherlands (8 pages). Lien externe
Shabanian, J., & Chaouki, J. (août 2013). Radioactive particle tracking in a bubbling gas-solid fluidized bed with thermally induced interparticle forces [Communication écrite]. 9th World Congress of Chemical Engineering, Seoul, Korea. Non disponible
Shahrestani, S. M. (2013). Electro Deposition of Cuprous Oxide for Thin Films Solar Cell Applications [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Sheikholeslami, Z. (2013). Comprehensive Characterization of an Inducible Mammalian Expression System Using 13C-Metabolic Flux Analysis [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Sheikholeslami, Z., Jolicoeur, M., & Henry, O. (2013). The impact of the timing of induction on the metabolism and productivity of CHO cells in culture. Biochemical Engineering Journal, 79, 162-171. Lien externe
Sheikholeslami, Z., Jolicoeur, M., & Henry, O. (2013). Probing the metabolism of an inducible mammalian expression system using extracellular isotopomer analysis. Journal of Biotechnology, 164(4), 469-478. Lien externe
Shekari, A., & Patience, G. S. (2013). Transient kinetics of n-butane partial oxidation at elevated pressure. Canadian Journal of Chemical Engineering, 91(2), 291-301. Lien externe
Shishin, D. (2013). Development of a Thermodynamic Database for Copper Smelting and Converting [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Shishin, D., Hidayat, T., Jak, E., & Decterov, S. (2013). Critical assessment and thermodynamic modeling of the Cu-Fe-O system. CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry, 41, 160-179. Lien externe
Si Mehand, M. (2013). Optimisation en ligne des expériences réalisées à l'aide de biocapteurs dont le principe de détection est la résonance plasmonique de surface [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Some, A. (2013). Amélioration des prévisions environnementales de tables entrées/sorties par l'utilisation d'un modèle économique d'équilibre général [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Some, A., Dandres, T., Gaudreault, C., & Samson, R. (septembre 2013). Using a specific environmental tool to assess the impacts of biofuels transport policies [Communication écrite]. SAE AeroTech Congress and Exhibition (AEROTECH 2013), Montréal, Québec. Lien externe
Spreutels, L. (2013). Séchage des levures en lit à jet conique : expérimentation et modélisation multi-échelles [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Spreutels, L., Haut, B., Chaouki, J., Bertrand, F., & Legros, R. (août 2013). Multiscale modeling of conical spouted bed drying applied to Baker's Yeast [Communication écrite]. 9th world Congress of Chemical Engineering (WEEC9), Seoul, Korea. Non disponible
Spreutels, L., Legros, R., Chaouki, J., Bertrand, F., & Haut, B. (octobre 2013). Modeling of conical spouted bed drying using a multiscale approach [Communication écrite]. 63rd CSChE Annual Conference, Fredericton, NB, Canada. Non disponible
Stobiac, V. (2013). Développement d'une méthode de Boltzmann sur réseau pour la simulation d'écoulements visqueux en cuves agitées [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Stobiac, V., Tanguy, P. A., & Bertrand, F. (2013). Boundary conditions for the lattice Boltzmann method in the case of viscous mixing flows. Computers and Fluids, 73, 145-161. Lien externe
Stuart, P. R. (octobre 2013). Chemical Engineers Calculate! Sustainable Design Decision-Making Using Process Systems Analysis in the Forest Products Industry [Présentation]. Dans 63rd Canadian Society for Chemical Engineering (CSChE) Conference, Fredericton, NB, Canada. Non disponible
Stuart, P. R. (janvier 2013). Key Success Factor for the Sustainable Biorefinery: Delivering Added-Value Products Via Unique Supply Chains [Présentation]. Dans Chalmers University of Technology, Göteborg, Sweden. Non disponible
Stuart, P. R. (janvier 2013). Key Success Factor for the Sustainable Biorefinery: Delivering Added-Value Products Via Unique Supply Chains [Présentation]. Dans Processum Biorefinery Initiative 10-Year Anniversary, Umeå, Sweden. Non disponible
Taghizadeh, A., & Favis, B. D. (2013). Carbon nanotubes in blends of polycaprolactone/thermoplastic starch. Carbohydrate Polymers, 98(1), 189-98. Lien externe
Taghizadeh, A., & Favis, B. D. (2013). Effect of high molecular weight plasticizers on the gelatinization of starch under static and shear conditions. Carbohydrate Polymers, 92(2), 1799-1808. Lien externe
Taghizadeh, A., Sarazin, P., & Favis, B. D. (2013). High molecular weight plasticizers in thermoplastic starch/polyethylene blends. Journal of Materials Science, 48(4), 1799-1811. Lien externe
Talebi-Esfandarani, M. (2013). Synthesis, Characterization and Modification of LifeP04 by Doping with Platinum and Palladium for Lithium-Ion Batteries [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Tamadondar, M. R., Zarghami, R., Azizpour, H., Mostoufi, N., Chaouki, J., & Radmanesh, R. (2013). Using S-statistic for investigating the effect of temperature on hydrodynamics of gas-solid fluidization. Particuology, 11(3), 288-293. Lien externe
Tarabella, G., Coppedè, N., Iannotta, S., Cicoira, F., Kumar, P., & Santato, C. (2013). Organic bioelectronics. Dans Handbook of Organic Materials for Optical and (Opto)Electronic Devices: Properties and Applications (p. 597-617). Lien externe
Tarabella, G., Mahvash Mohammadi, F., Coppede, N., Barbero, F., Iannotta, S., Santato, C., & Cicoira, F. (2013). New opportunities for organic electronics and bioelectronics: Ions in action. Chemical Science, 4(4), 1395-1409. Lien externe
Tavares, J. R. (décembre 2013). L'ingénierie photochimique des surfaces pour permettre la synthèse de nanocomposites [Communication écrite]. Colloque CREPEC, Montréal, Québec. Non disponible
Tavares, J. R. (2013). Physico-chemical analysis/insulation design. Dans Patience, G. S. (édit.), Experimental Methods and Instrumentation for Chemical Engineers (p. 234-239). Lien externe
Tavares, J. R., & Dorval-Dion, C. A. (octobre 2013). High-wavelength, low-energy photochemical surface engineering [Communication écrite]. 2nd International Conference and Exhibition on Material Science & Engineering, Las Vegas, Nevada. Lien externe
Tebib, M., Ajersch, F., & Chen, X.-G. (2013). Rheological Properties and Microstructure of Hypereutectic Al-Si-Mg Alloys Using Rheocasting Route. Solid State Phenomena, 192-193, 323-8. Lien externe
Tebib, M., Ajersch, F., & Chen, X.-G. (octobre 2012). Rheological properties and microstructure of hypereutectic semi-solid Al-Si-Mg alloys using rheocasting route [Communication écrite]. 12th International Conference on Semi-Solid Processing of Alloys and Composites, S2P 2012, Cape Town, South Africa. Lien externe
Tebib, M., Ajersch, F., Samuel, A. M., & Chen, X.-G. (2013). Solidification and microstructural evolution of hypereutectic Al-15Si-4Cu-Mg alloys with high magnesium contents. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 44(9), 4282-4295. Lien externe
Thalla, P. K., Contreras-García, A., Fadlallah, H., Barrette, J., De Crescenzo, G., Merhi, Y., & Lerouge, S. (2013). A Versatile Star PEG Grafting Method for the Generation of Nonfouling and Nonthrombogenic Surfaces. BioMed Research International, 2013, 1-12. Disponible
Thompson, C. M. (2013). Development of a Production Process for a Virus Like Particle Based Vaccine in Cell Culture [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Thompson, C. M., Petiot, E., Aucoin, M. G., Henry, O., & Kamen, A. A. (juin 2013). Developing a production process for influenza VLPs: a comparison between HEK 293SF and Sf9 production platforms [Affiche]. 23rd European Society for Animal Cell Technology Meeting (ESACT 2013), Lille, France (2 pages). Publié dans BMC Proceedings, 7(S6). Disponible
Thompson, C. M., Petiot, E., Lennaertz, A., Henry, O., & Kamen, A. A. (2013). Analytical technologies for influenza virus-like particle candidate vaccines: challenges and emerging approaches. Virology Journal, 10(1). Disponible
Tremblay, J. P., Xiao, X., Aartsma-Rus, A., Barbas, C., Blau, H. M., Bogdanove, A. J., Boycott, K., Braun, S., Breakefield, X. O., Bueren, J. A., Buschmann, M. D., Byrne, B. J., Calos, M., Cathomen, T., Chamberlain, J., Chuah, M., Cornetta, K., Davies, K. E., Dickson, J. G., ... Gao, G. (2013). Translating the genomics revolution: the need for an international gene therapy consortium for monogenic diseases. Molecular Therapy, 21(2), 266-268. Disponible
Valancin, A., Srinivasan, B., Rivoal, J., & Jolicoeur, M. (2013). Analyzing the effect of decreasing cytosolic triosephosphate isomerase on Solanum tuberosum hairy root cells using a kinetic-metabolic model. Biotechnology and Bioengineering, 110(3), 924-935. Lien externe
Valenzuela, E., Ramos-Sanchez, V., Lambert Arista, A. A., & Savadogo, O. (2013). Nanostructured TiO₂ doped with Nb as a novel support for PEMFC. Journal of Materials, 2013, 1-6. Disponible
Valitova, I., Amato, M., Mahvash, F., Cantele, G., Maffucci, A., Santato, C., Martel, R., & Cicoira, F. (2013). Carbon nanotube electrodes in organic transistors. Nanoscale, 5(11), 4638-4646. Lien externe
Vallée, C. (2013). Optimisation de la croissance de cellules HEK293 exprimant la pyruvate carboxylase dans un bioréacteur en mode cuvée-alimentée [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Vergé, X.P.C., Maxime, D., Dyer, J.A., Desjardins, R.L., Arcand, Y., & Vanderzaag, A. (2013). Carbon footprint of Canadian dairy products: Calculations and issues. Journal of Dairy Science, 96(9), 6091-6104. Disponible
Wang, C., Peng, J., Li, H., Bi, X. T., Legros, R., Lim, C. J., & Sokhansanj, S. (2013). Oxidative torrefaction of biomass residues and densification of torrefied sawdust to pellets. Bioresource Technology, 127, 318-325. Lien externe
Wang, J., Miao, N., Chartrand, P., & Jung, I.-H. (2013). Thermodynamic evaluation and optimization of the (Na + X) binary systems (X = Ag, Ca, In, Sn, Zn) using combined Calphad and first-principles methods of calculation. Journal of Chemical Thermodynamics, 66, 22-33. Lien externe
Wang, X., Zhang, S., Liu, Z., Yue, S., Zhang, Z., Chen, Y., Xie, G., Xue, Q., Zhao, Y., & Liu, S. (2013). Hybrid white organic light-emitting diodes with improved color stability and negligible efficiency roll-off based on blue fluorescence and yellow phosphorescence. Journal of Luminescence, 137, 59-63. Lien externe
Wu, Q., Zhang, S., Yue, S., Zhang, Z., Xie, G., Zhao, Y., & Liu, S. (2013). Enhanced efficiency in single-host white organic light-emitting diode by triplet exciton conversion. Journal of Luminescence, 143, 108-112. Lien externe
Wünsche, J., Cardenas, L., Rosei, F., Cicoira, F., Gauvin, R., Graeff, C. F. O., Poulin, S., Pezzella, A., & Santato, C. (2013). In Situ formation of dendrites in eumelanin thin films between gold electrodes. Advanced Functional Materials, 23(45), 5591-5598. Lien externe
Wünsche, J., Cicoira, F., Graeff, C. F. O., & Santato, C. (2013). Eumelanin thin films: Solution-processing, growth, and charge transport properties. Journal of Materials Chemistry B, 1(31), 3836-3842. Lien externe
Wünsche, J., Tarabella, G., Bertolazzi, S., Bocoum, M., Coppede, N., Barba, L., Arrighetti, G., Lutterotti, L., Iannotta, S., Cicoira, F., & Santato, C. (2013). The correlation between gate dielectric, film growth, and charge transport in organic thin film transistors: The case of vacuum-sublimed tetracene thin films. Journal of Materials Chemistry C, 1(5), 967-976. Lien externe
Zhang, S., Liu, Z., Wang, X., Yue, S., Zhang, Z., Wu, Q., Xie, G., Xue, Q., Chen, Y., Wang, P., Guo, R., Qu, D., Zhao, Y., & Liu, S. (2013). White organic light-emitting diodes based on a yellow phosphorescence iridium complex and a high-efficiency blue fluorescence. Thin Solid Films, 537, 221-225. Lien externe
Zhang, S., Yue, S., Wu, Q., Zhang, Z., Chen, Y., Wang, X., Liu, Z., Xie, G., Xue, Q., Qu, D., Zhao, Y., & Liu, S. (2013). Color stable multilayer all-phosphor white organic light-emitting diodes with excellent color quality. Organic Electronics: physics, materials, applications, 14(8), 2014-2022. Lien externe
Zhou, T. H., Gheribi, A. E., & Zurob, H. S. (2013). Austenite particle coarsening and delta-ferrite grain growth in model Fe-Al alloy. Canadian Metallurgical Quarterly, 52(1), 90-97. Lien externe
Zohrevand, A., Ajji, A., & Mighri, F. (juillet 2013). Microstructure and mechanical properties of isotactic polypropylene reinforced with TiO₂ nanoparticles [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe
