 | Monter d'un niveau |
Marek BalazinskiDépartement de génie mécanique
Voir sa fiche dans le Répertoire des Expertises de Polytechnique Montréal
Réseau de collaborationCe graphique trace les liens entre tous les collaborateurs des publications de {} figurant sur cette page.
Chaque lien représente une collaboration sur la même publication. L'épaisseur du lien représente le nombre de collaborations.
Utilisez la molette de la souris ou les gestes de défilement pour zoomer à l'intérieur du graphique.
Vous pouvez cliquer sur les noeuds et les liens pour les mettre en surbrillance et déplacer les noeuds en les glissant.
Enfoncez la touche "Ctrl" ou la touche "⌘" en cliquant sur les noeuds pour ouvrir la liste des publications de cette personne.
Escaich, C., Shi, Z., Baron, L., & Balazinski, M. (2024). Effects of tool geometry and fluid on the surface morphology and integrity in scratching TiMMCs. International Journal of Abrasive Technology, 12(2), 147-166. Lien externe
Marousi, M., Rimpault, X., Turenne, S., & Balazinski, M. (2023). Initial tool wear and process monitoring during titanium metal matrix composite machining (TiMMC). Journal of Manufacturing Processes, 86, 208-220. Lien externe
Escaich, C., Shi, Z., Baron, L., & Balazinski, M. (2023). Investigation on workpiece microstructure and wheel performance on grinding titanium metal matrix composites. International Journal of Abrasive Technology, 11(4), 293-309. Lien externe
Jamshidi, M., Chatelain, J.-F., Rimpault, X., & Balazinski, M. (2022). Tool condition monitoring based on the fractal analysis of current and cutting force signals during CFRP trimming. International Journal of Advanced Manufacturing Technology, 121(11-12), 8127-8142. Lien externe
Jamshidi, M., Chatelain, J.-F., Rimpault, X., & Balazinski, M. (2022). Tool Condition Monitoring Using Machine Tool Spindle Electric Current and Multiscale Analysis while Milling Steel Alloy. Journal of Manufacturing and Materials Processing, 6(5), 115 (12 pages). Lien externe
Kamalizadeh, S., Niknam, S. A., Balazinski, M., & Turenne, S. (2022). The Use of TOPSIS Method for Multi-Objective Optimization in Milling Ti-MMC. Metals, 12(11), 18 pages. Lien externe
Memarianpour, M., Niknam, S. A., Turenne, S., & Balazinski, M. (2021). Study of the effects of initial cutting conditions and transition period on ultimate tool life when machining inconel 718. Materials, 14(3), 592 (13 pages). Disponible
Zeb, G., Duong, T. L., Balazinski, M., & Le, X. T. (2021). Direct Electroless Deposition of Nickel onto Silicon Nitride Ceramic: A Novel Approach for Copper Metallization of Micro-/Nano-fabricated Devices. Advanced Engineering Materials, 23(2), 8 pages. Lien externe
Kishawy, H. A., Salem, A., Hegab, H., Hosseini, A., & Balazinski, M. (2021). Micro-textured cutting tools: Phenomenological analysis and design recommendations. CIRP Annals, 70(1), 65-68. Lien externe
Slamani, M., Chatelain, J.-F., Il, A., & Balazinski, M. (2021). Statistical analysis and modeling of temperature distribution during various milling operations of thin walled aircraft parts. Physica A: Statistical Mechanics and its Applications, 570, 20 pages. Lien externe
Escaich, C., Shi, Z., Baron, L., & Balazinski, M. (2020). Machining of titanium metal matrix composites : progress overview. Materials, 13(21), 5011 (18 pages). Disponible
Safavi, M., Balazinski, M., Mehmanparast, H., & Niknam, S. A. (2020). Experimental characterization of tool wear morphology and cutting force profile in dry and wet turning of titanium metal matrix composites (Ti-MMCs). Metals, 10(11), 14 pages. Disponible
Jamshidi, M., Rimpault, X., Balazinski, M., & Chatelain, J.-F. (2020). Fractal analysis implementation for tool wear monitoring based on cutting force signals during CFRP/titanium stack machining. International Journal of Advanced Manufacturing Technology, 106(9-10), 3859-3868. Lien externe
Memarianpour, M., Niknam, S. A., Turenne, S., & Balazinski, M. (2020). Initial Tool Wear Behavior in High-Speed Turning of Inconel 718. Transactions of the Canadian Society for Mechanical Engineering, 44(3), 395-404. Lien externe
Hodonou, C., Kerbrat, O., Balazinski, M., & Brochu, M. (2020). Process selection charts based on economy and environment: subtractive or additive manufacturing to produce structural components of aircraft. International Journal on Interactive Design and Manufacturing (IJIDeM), 14(3), 861-873. Lien externe
Hodonou, C., Balazinski, M., Brochu, M., & Mascle, C. (2019). Material-design-process selection methodology for aircraft structural components: application to additive vs subtractive manufacturing processes. International Journal of Advanced Manufacturing Technology, 103(1-4), 1509-1517. Lien externe
Niknam, S. A., Saberi, M., Kouam, J., Hashemi, R., Songmene, V., & Balazinski, M. (2019). Ultrafine and fine particle emission in turning titanium metal matrix composite (Ti-MMC). Journal of Central South University, 26(6), 1563-1572. Lien externe
Rimpault, X., Balazinski, M., & Chatelain, J.-F. (2018). Fractal analysis application outlook for improving process monitoring and machine maintenance in manufacturing 4.0. Journal of Manufacturing and Materials Processing, 2(3), 62 (7 pages). Disponible
Niknam, S. A., Kouam, J., Songméné, V., & Balazinski, M. (2018). Dry and semi-dry turning of titanium metal matrix composites (Ti-MMCs). Procedia CIRP, 77, 62-65. Disponible
Vu, N. P., Duong, X. T., Ly, V. A., Nguyen, D. C., Tran, M. D., Phan, Q. T., Balazinski, M., Son, L. T., Zeb, G., & Le, X. T. (2018). Electroless nickel plating onto Plexiglas (R) through simple covalent grafting of vinylpyridine seed layer. Materials & Design, 144, 151-158. Lien externe
Il, A., Chatelain, J.-F., Lalonde, J.-F., Balazinski, M., & Rimpault, X. (2018). An experimental investigation of the influence of cutting parameters on workpiece internal temperature during Al2024-T3 milling. International Journal of Advanced Manufacturing Technology, 97(1-4), 413-426. Lien externe
Caggiano, A., Rimpault, X., Teti, R., Balazinski, M., Chatelain, J.-F., & Nele, L. (2018). Machine learning approach based on fractal analysis for optimal tool life exploitation in CFRP composite drilling for aeronautical assembly. CIRP Annals, 67(1), 483-486. Lien externe
Rimpault, X., Bitar-Nehme, E., Balazinski, M., & Mayer, J. R. R. (2018). Online monitoring and failure detection of capacitive displacement sensor in a Capball device using fractal analysis. Measurement: Journal of the International Measurement Confederation, 118, 23-28. Lien externe
Provencher, P. R., & Balazinski, M. (2018). Principal component idealizations of the dominant modes of variability in the mechanics of the cutting process in metal turning. International Journal of Advanced Manufacturing Technology, 95(5-8), 1665-1676. Lien externe
Kamalizadeh, S., Niknam, S. A., Asgari, A., & Balazinski, M. (2018). Tool wear characterization in high-speed milling of titanium metal matrix composites. International Journal of Advanced Manufacturing Technology, 100(9-12), 2901-2913. Lien externe
Niknam, S. A., Kamalizadeh, S., Asgari, A., & Balazinski, M. (2018). Turning titanium metal matrix composites (Ti-MMCs) with carbide and CBN inserts. International Journal of Advanced Manufacturing Technology, 97(1-4), 253-265. Lien externe
Rimpault, X., Il, A., Chatelain, J.-F., Lalonde, J.-F., & Balazinski, M. (2018). Workpiece subsurface temperature study during aluminum skin milling in slotting and ramping. Procedia CIRP, 77, 417-420. Disponible
Rimpault, X., Chatelain, J.-F., Sapieha, J.-E., & Balazinski, M. (2017). Burr height monitoring while drilling CFRP/titanium/aluminium stacks. Mechanics and Industry, 18(1), 11 pages. Lien externe
Huang, C.-W., Baron, L., Balazinski, M., & Achiche, S. (2017). Comprehensive model optimization in pulp quality prediction: A machine learning approach. PeerJ Preprints, 5, e2949v1. Lien externe
Shaban, Y., Yacout, S., Balazinski, M., & Jemielniak, K. (2017). Cutting tool wear detection using multiclass logical analysis of data. Machining Science and Technology, 21(4), 526-541. Lien externe
Aramesh, M., Attia, H. M., Kishawy, H. A., & Balazinski, M. (2017). Observation of a unique wear morphology of cBN inserts during machining of titanium metal matrix composites (Ti-MMCs); leading to new insights into their machinability. International Journal of Advanced Manufacturing Technology, 92(1-4), 519-530. Lien externe
Niknam, S. A., Balazinski, M., & Songmene, V. (2017). To characterize and optimize the surface quality attributes in slot milling operation. International Journal of Advanced Manufacturing Technology, 97(1-4), 727-746. Lien externe
Rimpault, X., Chatelain, J. F., Sapieha, J.-E., & Balazinski, M. (2017). Tool wear and surface quality assessment of CFRP trimming using fractal analyses of the cutting force signals. CIRP Journal of Manufacturing Science and Technology, 16, 72-80. Lien externe
Provencher, P. R., & Balazinski, M. (2016). Automatic identification of feed marks in machined surface roughness profiles by correlating random variations. International Journal of Advanced Manufacturing Technology, 82(5-8), 1305-1315. Lien externe
Bejjani, R., Balazinski, M., Attia, H., Plamondon, P., & L'Espérance, G. (2016). Chip formation and microstructure evolution in the adiabatic shear band when machining titanium metal matrix composites. International Journal of Machine Tools and Manufacture, 109, 137-146. Lien externe
Aramesh, M., Attia, M. H., Kishawy, H. A., & Balazinski, M. (2016). Estimating the remaining useful tool life of worn tools under different cutting parameters: A survival life analysis during turning of titanium metal matrix composites (Ti-MMCs). CIRP Journal of Manufacturing Science and Technology, 12, 35-43. Lien externe
Duong, X.T., Mayer, J. R. R., & Balazinski, M. (2016). Initial tool wear behavior during machining of titanium metal matrix composite (TiMMCs). International Journal of Refractory Metals and Hard Materials, 60, 169-176. Lien externe
Ghandehariun, A., Kishawy, H., & Balazinski, M. (2016). On machining modeling of metal matrix composites: A novel comprehensive constitutive equation. International Journal of Mechanical Sciences, 107, 235-241. Lien externe
Rimpault, X., Chatelain, J. F., Sapieha, J.-E., & Balazinski, M. (2016). Surface profile texture characterization of trimmed laminated composite in the stacking sequence direction. Journal of the International Measurement Confederation, 91, 84-92. Lien externe
Rimpault, X., Chatelain, J.-F., Sapieha, J.-E., & Balazinski, M. (2016). Surface profile topography of trimmed and drilled carbon/epoxy composite. Procedia CIRP, 45, 27-30. Disponible
Aramesh, M., Shaban, Y., Yacout, S., Attia, M. H., Kishawy, H. A., & Balazinski, M. (2016). Survival life analysis applied to tool life estimation with variable cutting conditions when machining titanium metal matrix composites (Ti-MMCs). Machining Science and Technology, 20(1), 132-147. Lien externe
Kouam, J., Songmene, V., Balazinski, M., & Hendrick, P. (2015). Effects of minimum quantity lubricating (MQL) conditions on machining of 7075-T6 aluminum alloy. International Journal of Advanced Manufacturing Technology, 79(5-8), 1325-1334. Lien externe
Shaban, Y., Aramesh, M., Yacout, S., Balazinski, M., Attia, H., & Kishawy, H. (2015). Optimal replacement times for machining tool during turning titanium metal matrix composites under variable machining conditions. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 231(6), 924-932. Lien externe
Ren, Q., Baron, L., Balazinski, M., Botez, R., & Bigras, P. (2015). Tool wear assessment based on type-2 fuzzy uncertainty estimation on acoustic emission. Applied Soft Computing, 31, 14-24. Lien externe
Shaban, Y., Yacout, S., & Balazinski, M. (2015). Tool Wear Monitoring and Alarm System Based on Pattern Recognition With Logical Analysis of Data. Journal of Manufacturing Science and Engineering, 137(4), 10 pages. Lien externe
Guiassa, R., Mayer, J. R. R., Balazinski, M., Engin, S., & Delorme, F.-E. (2014). Closed door machining error compensation of complex surfaces using the cutting compliance coefficient and on-machine measurement for a milling process. International Journal of Computer Integrated Manufacturing, 27(11), 1022-1030. Lien externe
Shaban, Y., Meshreki, M., Yacout, S., Balazinski, M., & Attia, H. (2014). Process control based on pattern recognition for routing carbon fiber reinforced polymer. Journal of Intelligent Manufacturing, 28(1), 165-179. Lien externe
Ren, Q., Balazinski, M., Baron, L., Jemielniak, K., Botez, R., & Achiche, S. (2014). Type-2 fuzzy tool condition monitoring system based on acoustic emission in micromilling. Information Sciences, 255, 121-134. Lien externe
Kannan, S., Kishawy, H. A., & Balazinski, M. (2013). Analysis of two- and three-body abrasive wear during machining of aluminium-based metal matrix composite. International Journal of Materials and Product Technology, 46(1), 81-94. Lien externe
Slamani, M., Mayer, J. R. R., & Balazinski, M. (2013). Concept for the integration of geometric and servo dynamic errors for predicting volumetric errors in five-axis high-speed machine tools: an application on a XYC three-axis motion trajectory using programmed end point constraint measurements. International Journal of Advanced Manufacturing Technology, 65(9-12), 1669-1679. Lien externe
Ren, Q., Balazinski, M., Jemielniak, K., Baron, L., & Achiche, S. (2013). Experimental and fuzzy modelling analysis on dynamic cutting force in micro milling. Soft Computing, 17(9), 1687-1697. Lien externe
Ren, Q., Baron, L., Balazinski, M., & Jemielniak, K. (2013). Fuzzy cutting force modelling in micro-milling. Journal of Intelligent and Fuzzy Systems, 25(4), 1027-1035. Lien externe
Ren, Q., Baron, L., & Balazinski, M. (2012). Fuzzy Identification of Cutting Acoustic Emission With Extended Subtractive Cluster Analysis. Nonlinear Dynamics, 67(4), 2599-2608. Lien externe
Qasaimeh, A., Elektorowicx, M., & Balazinski, M. (2012). GA-Fuzzy decision support system for mercury removal in natural waters. Computational Water, Energy and Environmental Engineering, 1(1), 1-7. Lien externe
Ren, Q., Balazinski, M., & Baron, L. (2012). High-order interval type-2 Takagi-Sugeno-Kang fuzzy logic system and its application in acoustic emission signal modeling in turning process. International Journal of Advanced Manufacturing Technology, 63(9-12), 1057-1063. Lien externe
Slamani, M., Mayer, J. R. R., Balazinski, M., Carrier, B., & Engin, S. (2012). Improvement to High-Speed End Mill Boring Accuracy by a Simple Compensation Strategy. Machining Science and Technology, 16(1), 1-19. Lien externe
Ren, Q., Baron, L., & Balazinski, M. (2011). Type-2 fuzzy modeling for acoustic emission signal in precision manufacturing. Modelling and Simulation in Engineering, 2011, 1-12. Disponible
Mascle, C., Balazinski, M., & Ben Mhenni, A. (2011). Effect of roughness and interference on torque capacity of a shrink fitted tool holder. International Journal of Advanced Manufacturing Systems, 13(1), 149-165. Non disponible
Bejjani, R., Shi, B., Attia, H., & Balazinski, M. (2011). Laser assisted turning of Titanium Metal Matrix Composite. CIRP Annals - Manufacturing Technology, 60(1), 61-64. Lien externe
Bejjani, R., Balazinski, M., Shi, B., Attia, H., & Kishawy, H. (2011). Machinability and chip formation of titanium metal matrix composites. International Journal of Advanced Manufacturing Systems, 13(1), 81-96. Non disponible
Kishawy, H. A., Pang, L., & Balazinski, M. (2011). Modeling of tool wear during hard turning with self-propelled rotary tools. International Journal of Mechanical Sciences, 53(11), 1015-1021. Lien externe
Ren, Q., Balazinski, M., Baron, L., & Jemielniak, K. (2011). TSK fuzzy modeling for tool wear condition in turning processes: An experimental study. Engineering Applications of Artificial Intelligence, 24(2), 260-265. Lien externe
Baron, L., Balazinski, M., & Ren, Q. (2011). Type2 TSK Fuzzy Logic System and its Type1 Counterpart. International Journal of Computer Applications, 20(6), 8-13. Lien externe
Slamani, M., Mayer, J. R. R., Balazinski, M., Zargarbashi, S. H. H., Engin, S., & Lartigue, C. (2010). Dynamic and geometric error assessment of an XYC axis subset on five-axis high-speed machine tools using programmed end point constraint measurements. International Journal of Advanced Manufacturing Technology, 50(9-12), 1063-1073. Lien externe
Slamani, M., Mayer, J. R. R., Balazinski, M., & Engin, S. (2010). Identification and Compensation of Dynamic Scale Mismatches in High-Speed End Mill Boring Trajectory on CNC Machines. Journal of Manufacturing Science and Engineering, 132(3), 034501-034501. Lien externe
Hassani, S., Bielawski, M., Beres, W., Balazinski, M., Martinu, L., & Sapieha, J.-E. (2010). Impact stress absorption and load spreading in multi-layered erosion-resistant coatings. Wear, 268(5-6), 770-776. Lien externe
Tail, M., Yacout, S., & Balazinski, M. (2010). Replacement time of a cutting tool subject to variable speed. Proceedings of the Institution of Mechanical Engineers. Part B, Journal of Engineering Manufacture, 224(3), 373-383. Lien externe
Khoukhi, A., Baron, L., & Balazinski, M. (2009). Constrained multi-objective trajectory planning of parallel kinematic machines. Robotics and Computer-Integrated Manufacturing, 25(4-5), 756-769. Lien externe
Nault, M. L., Labelle, H., Aubin, C.-É., Sangole, A., & Balazinski, M. (2009). Fuzzy logic assisted surgical planning in adolescent idiopathic scoliosis. Journal of Spinal Disorders & Techniques, 22(4), 263-269. Lien externe
Khoukhi, A., Baron, L., Balazinski, M., & Demirli, K. (2009). Hybrid neuro-fuzzy multi-objective trajectory planning of redundant manipulators. Control and Intelligent Systems, 37(2), 87-96. Lien externe
Wozniak, A., Mayer, J. R. R., & Balazinski, M. (2009). Stylus tip envelop method: Corrected measured point determination in high definition coordinate metrology. International Journal of Advanced Manufacturing Technology, 42(5-6), 505-514. Lien externe
Hassani, S., Sapieha, J.-E., Bielawski, M., Beres, W., Martinu, L., & Balazinski, M. (2008). Design of Hard Coating Architecture for the Optimization of Erosion Resistance. Wear, 265(5-6), 879-887. Lien externe
Calatoru, V. D., Balazinski, M., Mayer, J. R. R., Paris, H., & L'Espérance, G. (2008). Diffusion Wear Mechanism During High-Speed Machining of 7475-T7351 Aluminum Alloy With Carbide End Mills. Wear, 265(11-12), 1793-1800. Lien externe
Khoukhi, A., Baron, L., Balazinski, M., & Demirli, K. (2008). A Hierarchical Neuro-Fuzzy System to Near Optimal-Time Trajectory Planning of Redundant Manipulators. Engineering Applications of Artificial Intelligence, 21(7), 974-984. Lien externe
Hassani, S., Bielawski, M., Beres, W., Martinu, L., Balazinski, M., & Sapieha, J.-E. (2008). Predictive Tools for the Design of Erosion Resistant Coatings. Surface and Coatings Technology, 203(3-4), 204-210. Lien externe
Klim, Z. H., Szczepanski, P., & Balazinski, M. (2007). Causes and effects of cascading failures in aircraft systems. Diagnostyka, 41(1), 19-26. Lien externe
Achiche, S., Baron, L., Balazinski, M., & Benaoudia, M. (2007). Online prediction of pulp brightness using fuzzy logic models. Engineering Applications of Artificial Intelligence, 20(1), 25-36. Lien externe
Khoukhi, A., Baron, L., & Balazinski, M. (2007). A Projected Gradient Augmented Lagrangian Approach to Multi-Objective Trajectory Planning of Redundant Robots. Transactions of the Canadian Society for Mechanical Engineering, 31(4), 391-405. Lien externe
Nault, M. L., Labelle, H., Aubin, C.-É., & Balazinski, M. (2007). The Use of Fuzzy Logic to Select Which Curves Need to Be Instrumented and Fused in Adolescent Idiopathic Scoliosis - a Feasibility Study. Journal of Spinal Disorders & Techniques, 20(8), 594-603. Lien externe
Kannan, S., Kishawy, H. A., & Balazinski, M. (2006). Flank Wear Progression During Machining Metal Matrix Composites. Journal of Manufacturing Science and Engineering, 128(3), 787-791. Lien externe
Kishawy, H. A., Haglund, A., & Balazinski, M. (2006). Modelling of Material Side Flow in Hard Turning. CIRP Annals - Manufacturing Technology, 55(1), 85-88. Lien externe
Kishawy, H. A., Kannan, S., & Balazinski, M. (2005). Analytical Modeling of Tool Wear Progression During Turning Particulate Reinforced Metal Matrix Composites. CIRP Annals - Manufacturing Technology, 54(1), 55-58. Lien externe
Przybylo, A., Achiche, S., Balazinski, M., & Baron, L. (2005). Influence of clustering pre-processing on genetically generated fuzzy knowledge bases. Computer Assisted Mechanics and Engineering Sciences, 12(2-3), 207-221. Non disponible
Balazinski, M., & Przybylo, A. (2005). Teaching Manufacturing Processes Using Computer Animation. Journal of Manufacturing Systems, 24(3), 237-243. Lien externe
Coma, O., Mascle, C., & Balazinski, M. (2004). Application of a Fuzzy Decision Support System in a Design for Assembly Methodology. International Journal of Computer Integrated Manufacturing, 17(1), 83-94. Lien externe
Kishawy, H. A., Kannan, S., & Balazinski, M. (2004). An Energy Based Analytical Force Model for Orthogonal Cutting of Metal Matrix Composites. CIRP Annals - Manufacturing Technology, 53(1), 91-94. Lien externe
Achiche, S., Balazinski, M., & Baron, L. (2004). Multi combinative strategy to avoid premature convergence in genetically-generated fuzzy knowledge bases. Journal of Theoretical and Applied Mechanics, 42(3), 417-444. Lien externe
Achiche, S., Baron, L., & Balazinski, M. (2004). Real/binary-like coded versus binary coded genetic algorithms to automatically generate fuzzy knowledge bases: A comparative study. Engineering Applications of Artificial Intelligence, 17(4), 313-325. Lien externe
Balazinski, M., Czogala, E., Jemielmak, K., & Leski, J. (2002). Tool condition monitoring using artificial intelligence methods. Engineering Applications of Artificial Intelligence, 15(1), 73-80. Lien externe
Achiche, S., Balazinski, M., Baron, L., & Jemielniak, K. (2002). Tool wear monitoring using genetically-generated fuzzy knowledge bases. Engineering Applications of Artificial Intelligence, 15(3-4), 303-314. Lien externe
Baron, L., Achiche, S., & Balazinski, M. (2001). Fuzzy decision support system knowledge base generation using a genetic algorithm. International Journal of Approximate Reasoning, 28(2-3), 125-148. Lien externe
Wygowski, W., & Balazinski, M. (2000). Improvement of tapping accuracy through multicriteria choice of technological parameters. International Journal for Manufacturing Science and Technology, 2(2), 18-22. Non disponible
Balazinski, M., & Mpako, C. (2000). Improvement of Tool Life Through the Use of Two Discrete Feed Rates During Machining of 4140 Steel. Machining Science and Technology, 4(1), 1-13. Lien externe
Jemielniak, K., & Balazinski, M. (2000). Laboratory versus industrial cutting force sensor in tool condition monitoring. Journal for Manufacturing Science and Production, 3(1), 41-47. Lien externe
Songméné, V., & Balazinski, M. (1999). Machinability of graphitic metal matrix composits as a function of reinforcing particles. CIRO annals, 48(1), 139-153. Lien externe
Balazinski, M., Czogala, E., & Sadowski, T. (1997). Application of neural and fuzzy logic controllers to control selected mechanical systems. Journal of Intelligent & Fuzzy Systems, 5(2), 139-153. Lien externe
Mayer, J. R. R., Mir, Y. A., Trochu, F., Vafaeesefat, A., & Balazinski, M. (1997). Touch probe radius compensation for coordinate measurement using kriging interpolation. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 211(B1), 11-18. Lien externe
Klim, Z., Ennajimi, E., Balazinski, M., & Fortin, C. (1996). Cutting tool reliability analysis for variable feed milling of 17-4PH stainless steel. Wear, 195(1-2), 206-213. Lien externe
Balazinski, M., Czogala, E., Drwal, A., & Mrozek, A. (1996). Processing of uncertain knowledge in fuzzy decision support system fuzzy-flou. Archives of theoretical and applied computer science, Polish academy of sciences, 8(1-2), 63-74. Non disponible
Trochu, F., Abong, Y., Balazinski, M., & Larbrisseau, P. (1996). Rough machining of free-form surfaces defined by dual kriging. International Journal of Production Research, 34(6), 1603-1623. Lien externe
Dupinet, É., Balazinski, M., & Czogala, E. (1996). Tolerance allocation based on fuzzy and simulated annealing. Journal of Intelligent Manufacturing, 7(6), 1-11. Lien externe
Balazinski, M., & Songmene, V. (1995). Improvement of tool life through variable feed milling of inconel 600. CIRP Annals - Manufacturing Technology, 44(1), 55-58. Lien externe
Balazinski, M., & Czogala, E. (1995). Neural networks and their application to machining processes. Prace Naukowe Instytutu Technologii Maszyn i Automatyzacji Politechniki Wroclawskiej, Seria: Konferencje, 22, 44-58. Non disponible
Balazinski, M., Bellerose, M., & Czogala, E. (1994). Application of fuzzy logic techniques to the selection of cutting parameters in machining processes. Fuzzy Sets and Systems, 63(3), 307-317. Lien externe
Balazinski, M., & Ennajimi, E. (1994). Influence of feed variation on tool wear when milling stainless steel 17-4Ph. Journal of Engineering for Industry, 116(4), 516-520. Lien externe
Gou, M., Klim, Z., & Balazinski, M. (1997). Development and documentation of EMSA decision sub-module for RO/LO electric power generation system variants. (Rapport technique n° P2195). Non disponible
Memarianpour, M., Niknam, S. A., Turenne, S., & Balazinski, M. (décembre 2018). Initial Tool Wear Mechanism in Dry and Lubricated Turning of Inconel 718 [Communication écrite]. International Conference on Advances in Engineering Research and Application (ICERA 2018), Thai Nguyen, Vietnam. Lien externe
Rimpault, X., Chatelain, J.-F., Sapieha, J.-E., & Balazinski, M. (mai 2016). Fractal Analysis of Cutting Force and Acoustic Emission Signals During CFRP Machining [Communication écrite]. 7th CIRP Conference on High Performance Cutting (HPC 2016), Chemnitz, Germany. Publié dans Procedia CIRP, 46. Lien externe
Shaban, Y., Yacout, S., Balazinski, M., Meshreki, M., & Attia, H. (mars 2015). Diagnosis of machining outcomes based on machine learning with logical analysis of data [Communication écrite]. International Conference on Industrial Engineering and Operations Management (IEOM 2015), Dubai, United Arab Emirates (8 pages). Lien externe
Shaban, Y., Yacout, S., & Balazinski, M. (janvier 2015). Tool replacement based on pattern recognition with LAD [Communication écrite]. Annual Reliability and Maintainability Symposium (RAMS 2015), Palm Harbor, FL (6 pages). Lien externe
Rimpault, X., Chatelain, J.-F., Sapieha, J.-E., & Balazinski, M. (juin 2014). Burr Height Study for Drilling Carbon Epoxy Composite/Titanium/Aluminium Stacks [Communication écrite]. Joint Conference on Mechanical, Design Engineering & Advanced Manufacturing (JCM 2014), Toulouse France. Non disponible
Xuan-Truong, D., Balazinski, M., & Mayer, J. R. R. (novembre 2014). Chaotic tool wear during machining of titanium metal matrix composite (TiMMCs) [Communication écrite]. ASME International Mechanical Engineering Congress & Exposition (IMECE 2014), Montréal, Québec (9 pages). Lien externe
Rimpault, X., Chatelain, J.-F., Sapieha, J.-E., & Balazinski, M. (mai 2014). Cutting parameter impact on forces and on hole diameter while drilling CFRP/titanium/aluminium stacks [Communication écrite]. 3rd International Conference on Virtual Machining Process Technology (VMPT 2014), University of Calgary, Calgary, Alberta. Non disponible
Shaban, Y., Aramesh, M., Yacout, S., Balazinski, M., Attia, H., & Kishawy, H. (mai 2014). Optimal replacement of tool during turning titanium metal matrix composites [Communication écrite]. IIE Annual Conference and Expo 2014, Montréal, Québec. Non disponible
Aramesh, M., Shaban, Y., Balazinski, M., Attia, H., Kishawy, H. A., & Yacout, S. (juin 2014). Survival life analysis of the cutting tools during turning titanium metal matrix composites (Ti-MMCs) [Communication écrite]. 6th CIRP Conference on Performance Cutting (HPC 2014), Berkeley, Cal.. Publié dans Procedia CIRP, 14. Lien externe
Aramesh, M., Shaban, Y., Balazinski, M., Attia, M. H., & Kishawy, H. A. (mai 2014). Tool life prediction via survival life analysis of the cutting inserts during turning titanium metal matrix composites (TI-MMCs) [Communication écrite]. 3rd International Conference on Virtual Machining Process Technology (VMPT 2014), University of Calgary, Calgary, Alberta. Non disponible
Bejjani, R., Balazinski, M., & Attia, H. (mai 2013). Analysis of crack initiation and evolution when turning titanium MMC using a quick stop device and finite element simulation [Communication écrite]. 2nd International Conference on Virtual Machining Process Technology (VMPT 2013), Hamilton, Ontario, Canada. Non disponible
Aramesh, M., Shi, B., Nassef, A. O., Attia, H., Balazinski, M., & Kishawy, H. A. (juin 2013). Meta-modeling optimization of the cutting process during turning titanium metal matrix composites (Ti-MMCs) [Communication écrite]. 14th CIRP Conference on Modeling of Machining Operations (CIRP CMMO 2013), Turin, Italy. Lien externe
Aramesh, M., Shi, B., Balazinski, M., Attia, H. A., & Kishawy, H. (mai 2013). On the tribological aspects of machining of titanium metal matrix composites (TI-MMCs) [Communication écrite]. 2nd International Conference on Virtual Machining Process Technology (VMPT 2013), Hamilton, Ontario, Canada. Non disponible
Klim, Z. H., Aramesh, M., Rimpault, X., & Balazinski, M. (septembre 2013). Wear Dependent tool reliability analysis during cutting titanium metal matrix composites (Ti-MMCs) [Communication écrite]. SAE AeroTech Congress and Exhibition (AEROTECH 2013), Montréal, Québec. Publié dans SAE International Journal of Aerospace, 6(2). Lien externe
Guiassa, R., Mayer, J. R. R., & Balazinski, M. (mai 2012). Continuous tool path compensation using discrete on machine measurement [Communication écrite]. 1st International Conference on Virtual Machining Process Technology (VMPT 2012), Montréal, Québec. Non disponible
Aramesh, M., Balazinski, M., Attia, H., & Kishawy, H. (mai 2012). An experimental investigation on the deformation process during cutting titanium metal matrix composites (TiMMCs) [Communication écrite]. 1st International Conference on Virtual Machining Process Technology (VMPT 2012), Montréal, Québec. Non disponible
Rouzmeh, S., Hoang, C., & Balazinski, M. (mai 2012). Experimental study of the drilling burr formation in nickel alloy, Inconel 625 [Communication écrite]. 1st International Conference on Virtual Machining Process Technology (VMPT 2012), Montréal, Québec. Non disponible
Bejjani, R., Balazinski, M., Attia, H., & Kishawy, H. (mai 2012). A study on adiabatic shear banding in chip segmentation when cutting TiMMC [Communication écrite]. 1st International Conference on Virtual Machining Process Technology (VMPT 2012), Montréal, Québec. Non disponible
Bejjani, R., Aramesh, M., Balazinski, M., Kishawy, H., & Attia, H. (juin 2011). Chip morphology study of titanium metal matrix composites [Communication écrite]. 23rd Canadian Congress of Applied Mechanics, Vancouver, Canada. Lien externe
Klim, Z. H., Balazinski, M., & Komljenovic, D. (mai 2011). Probabilistic approach limitations in the analysis of safety critical systems [Communication écrite]. 24th International Congress on Condition Monitoring and Diagnostics Engineering Management, Stavanger, Norway. Lien externe
Bejjani, R., Balazinski, M., Attia, H., Aramesh, M., & Kishawy, H. (septembre 2011). Segmentation and shear localization when turning titanium metal matrix composites [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, QC, Canada. Lien externe
Aramesh, M., Balazinski, M., Attia, H., Kishawy, H., & Bejjani, R. (septembre 2011). A study on phase transformation and particle distribution during machining titanium metal matrix composites [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, QC, Canada. Lien externe
Ren, Q., Baron, L., Balazinski, M., & Jemielniak, K. (juillet 2010). Acoustic emission signal feature analysis using type-2 fuzzy logic System [Communication écrite]. Annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2010), Toronto, Canada. Lien externe
Qun, R., Baron, L., Balazinski, M., & Jemielniak, K. (juin 2009). Fuzzy cutting force modeling in micro-milling using subtractive clustering for learning evaluation [Communication écrite]. 2nd International Conference Process Machine Interactions, Vancouver, British Columbia. Non disponible
Pang, L., Kishawy, H. A., & Balazinski, M. (mai 2010). GA based optimization for determining Johnson-Cook material parameters under orthogonal cutting conditions [Communication écrite]. 38th Annual North American Manufacturing Research Conference (NAMRC 2010), Kingston, ON, Canada. Non disponible
Qun, R., Baron, L., Balazinski, M., & Jemielniak, K. (juin 2009). Machinability of Titanium metal matrix composites [Communication écrite]. 2nd International Conference Process Machine Interactions, Vancouver, British Columbia. Non disponible
Ren, Q., Baron, L., Jemielniak, K., & Balazinski, M. (juillet 2010). Modelling of Dynamic Micromilling Cutting Forces Using Type-2 Fuzzy Rule-Based System [Communication écrite]. IEEE International Conference on Fuzzy Systems, Barcelona, Spain. Lien externe
Bejjani, R., Balazinski, M., Shi, B., & Attia, H. (mai 2010). A new design of quick stop device for research on chip formation [Communication écrite]. 38th Annual North American Manufacturing Research Conference (NAMRC 2010), Kingston, ON, Canada. Non disponible
Ren, Q., Baron, L., & Balazinski, M. (juin 2009). Application of Type-2 fuzzy estimation on uncertainty in machining: an approach on acoustic emission during turning process [Communication écrite]. 28th North American Fuzzy Information Processing Society Annual Conference. Lien externe
Balazinski, M., Beaton, H., Klim, Z. H., & Peloquin, F. (juin 2009). Hard Landing Indication System [Communication écrite]. COMADEM 2009, San Sebastian, Spain. Non disponible
Slamani, M., Mayer, J. R. R., Balazinski, M., & Engin, S. (mai 2009). Modeling and prediction of machines tools errors from circular tests [Communication écrite]. CANCAM 2009, Halifax. Non disponible
Ren, Q., Baron, L., & Balazinski, M. (août 2009). Type-2 TSK Fuzzy filtering and uncertainty estimation for acoustic emission in precision manufacturing [Communication écrite]. International Symposium on Computational Intelligence, Honolulu, Hawaii. Lien externe
Ren, Q., Balazinski, M., & Baron, L. (octobre 2009). Uncertainty prediction for tool wear condition using type-2 TSK fuzzy approach [Communication écrite]. IEEE International Conference on Systems, Man and Cybernetics, San Antonio, Texas, USA. Lien externe
Achiche, S., Wozniak, A., Fan, Z., Balazinski, M., Baron, L., & Sørensen, T. (mai 2008). 3D CMM strain-gauge triggering probe error characteristics modeling using fuzzy logic [Communication écrite]. Annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2008), New York City, NY, United states. Lien externe
Ren, Q., Baron, L., & Balazinski, M. (mai 2008). High order type-2 TSK fuzzy logic system [Communication écrite]. Annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2008), New York City, NY, United States. Lien externe
Qin, Z., Ren, Q., Baron, L., Balazinski, M., & Birglen, L. (mai 2008). Joint friction identification for robots using TSK fuzzy system based on subtractive clustering [Communication écrite]. Annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2008), New York City, NY, United States. Lien externe
Balazinski, M., Kavoliunas, M., & Klim, H. Z. (juin 2008). Risk ranking tool based on the fuzzy methodology [Communication écrite]. COMADEM 2008, Prague. Non disponible
Ren, Q., Balazinski, M., Baron, L., & Jemielniak, K. (juin 2008). Tool condition monitoring using the TSK fuzzy approach based on subtractive clustering method [Communication écrite]. 21st International Conference on Industrial, Engineering and Other Applications of Applied Intelligent Systems, (IEA/AIE 2008), Wroclaw, Poland. Lien externe
Khoukhi, A., Baron, L., & Balazinski, M. (mai 2007). Application of augmented lagrangian to mulit-objective trajectory planning of mobile robots [Communication écrite]. Conference on Systems and Control (CSC 2007), Marrakech, Morocco. Non disponible
Wozniak, A., Balazinski, M., & Mayer, J. R. R. (juin 2007). Application of fuzzy knowledge base for corrected measured point determination in coordinate metrology [Communication écrite]. Annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2007), San Diego, CA, United States. Lien externe
Calatoru, V. D., Balazinski, M., & Mayer, J. R. R. (juin 2007). Aspects of the tool wear of carbide tools during high speed machining of aluminum alloys [Communication écrite]. CANCAM 2007, Toronto, Ontario. Non disponible
Khoukhi, L., Baron, L., & Balazinski, M. (mai 2007). An augmented lagrangian with projection technique to multi-objective trajectory planning of redundant manipulators [Communication écrite]. CCToMM Mechanisms, Machines, and Mechatronics Symposium (M3 2007), Saint-Hubert, Québec. Non disponible
Klim, H. Z., Balazinski, M., & Szczepanski, P. (juin 2007). Cascading failures analysis [Communication écrite]. 7e Congrès international de génie industriel, Trois Rivières, Québec. Non disponible
Szczepanski, P., Klim, H. Z., & Balazinski, M. (juin 2007). Diagnostic des systèmes par la méthode de l'élimination [Communication écrite]. 7e Congrès international de génie industriel, Trois Rivières, Québec. Non disponible
Khoukhi, A., Baron, L., & Balazinski, M. (juin 2007). Fuzzy parking manoeuvres of wheeled mobile robots [Communication écrite]. Annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2007), San Diego, CA, United States. Lien externe
Ren, Q., Qin, Z., Baron, L., Birglen, L., & Balazinski, M. (juin 2007). Identification of rigid-body dynamics of robotic manipulators using type-2 fuzzy logic filter [Communication écrite]. Annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2007), San Diego, CA, United States. Lien externe
Slamani, M., Mayer, J. R. R., & Balazinski, M. (juin 2007). Improving machine tool accuracy for high-speed orbital milling of holes [Communication écrite]. CANCAM 2007, Toronto, Ontario. Non disponible
Akrout, K., Baron, L., Balazinski, M., & Achiche, S. (juin 2007). Influence of the migration process on the learning performances of fuzzy knowledge bases [Communication écrite]. 2004 annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2007), San Diego, CA, United States. Lien externe
Calatoru, V. D., Balazinski, M., & Mayer, J. R. R. (juin 2007). Method for analyzing the effects of aluminum build-up on tungsten carbide tools behavior [Communication écrite]. CANCAM 2007, Toronto, Ontario. Non disponible
Klim, Z. H., & Balazinski, M. (septembre 2007). Methodology for the common mode analysis [Communication écrite]. SAE AeroTech Congress and Exhibition (AEROTECH 2007), Los Angeles. Lien externe
Khoukhi, L., Baron, L., & Balazinski, M. (juin 2007). Multi-objective trajectory planning for redundant manipulators [Communication écrite]. 5th International Conference on Industrial Automation, Montréal, Québec. Non disponible
Khoukhi, L., Baron, L., & Balazinski, M. (mai 2007). Multi-objective trajectory planning for redundant manipulators using augmented lagrangian [Communication écrite]. CCToMM Mechanisms, Machines, and Mechatronics Symposium (M3 2007), Saint-Hubert, Québec. Lien externe
Khoukhi, A., Baron, L., & Balazinski, M. (mai 2007). Multi-Objective Trajectory Planning for Redundant Manipulators Using Gradient Projection and Augmented Lagrangian [Planification multi-objective de trajectoire des manipulateurs redondants par lagrangien augmenté]. [Communication écrite]. CCToMM Mechanisms, Machines, and Mechatronics Symposium (M3 2005), Saint-Hubert (12 pages). Lien externe
Khoukhi, A., Demirli, K., Baron, L., & Balazinski, M. (octobre 2007). Neuro-Fuzzy multi-objective trajectory planning of redundant manipulators [Communication écrite]. IEEE International Conference on Systems, Man and Cybernetics, Montréal, Québec. Lien externe
Wozniak, A., Mayer, J. R. R., Balazinski, M., & Côté, M. (août 2007). Pomiary ksztaltu ostrzy narzedzi skrawajacych przy pomocy wspolrzednosciowych maszyn pomiarowych [Communication écrite]. Metrologia w technikach wytwarzania, XII Krajowa III Miedzynarodowa Konferencja Naukowo Techniczna, Poland. Non disponible
Qun, R., Baron, L., & Balazinski, M. (mai 2007). Sensitivity analysis for type-1 and type-2 TSK fuzzy models modcounterpart [Communication écrite]. 18th IASTED, International Conference on Modelling and Simulation, Montréal, Québec. Lien externe
Ben Mehni, A., Mascle, C., & Balazinski, M. (mai 2006). Agility in high speed machining : optimisation between tool and holder [Communication écrite]. 6th International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME 2006), Grenoble. Non disponible
Kannan, S., Kishawy, H. A., & Balazinski, M. (octobre 2006). Analysis of abrasive wear during machining metal matrix composites [Communication écrite]. Aerospace Materials and manufacturing Process: Emerging Materials, Manufacturing and Repair Techniques, Montréal, Québec. Non disponible
Slamani, M., Mayer, J. R. R., Balazinski, M., & Engin, S. (juin 2006). Characterization of Machine Tools for Boring by Highspeed Orbital Milling [Communication écrite]. 2nd International Conference on High Performance Cutting, University of British Columbia, Vancouver, Canada. Non disponible
Khoukhi, A., Baron, L., & Balazinski, M. A Decoupled Approach to Optimal Time Energy Trajectory Planning of Parallel Kinematic Machines [Communication écrite]. Robot Design, Dynamics, and Control (Romansy 2006). Lien externe
Achiche, S., Wozniak, A., Balazinski, M., & Baron, L. (juin 2006). Fuzzy rule base influence on genetic-fuzzy reconstruction of CMM 3D triggering probe error characteristic [Communication écrite]. 2004 annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2006), Montréal, Québec. Lien externe
Khoukhi, A., Baron, L., Balazinski, M., & Demirli, K. (juin 2006). Fuzzy-Neuro Optimal Time-Energy Control of a Three Degrees of Freedom Planar Manipulator [Communication écrite]. Annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2006), Montréal, Québec. Lien externe
Wozniak, A., Mayer, J. R. R., Balazinski, M., & Côté, M. (juin 2006). Investigation on Prescise Measurement of Cutting Tool Edges Using Coordinate Measuring Machines [Communication écrite]. 2nd International Conference on High Performance Cutting, University of British Columbia, Vancouver, Canada. Non disponible
Elektorowicz, M., Qasaimeh, A., & Balazinski, M. (avril 2006). Optimisation of the Constructed Wetland Design Using a Fuzzy-Knowledge Approach [Communication écrite]. 35th WEAO Annual Technical Symposium and OPCEA Exhibition, Toronto. Non disponible
Achiche, S., Przybylo, A., Balazinski, M., & Baron, L. (juin 2006). Predefining numbers of fuzzy sets for genetically generated fuzzy knowledge bases using clustering techniques: Application for tool wear monitoring [Communication écrite]. 2004 annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2006), Montréal, Québec. Lien externe
Achiche, S., Baron, L., & Balazinski, M. (juin 2006). Predictive fuzzy control of paper quality [Communication écrite]. 2004 annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2006), Montréal, Québec. Lien externe
Ren, Q., Baron, L., & Balazinski, M. (juin 2006). Type-2 Takagi-Sugeno-Kang Fuzzy Logic Modeling using Subtractive Clustering [Communication écrite]. Annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2006), Montréal, Québec. Lien externe
Smoczynska, A., Bartnicka, H., Balazinski, M., Achiche, S., Elektorowicz, M., & Smoczynski, L. (mars 2005). Assessment of Zn and Cu effect of Cadmium sorption based on genetically generated fuzzy knowledge bases [Communication écrite]. International Workshop on Fate and Impact of Persistent Polluents in the Agroecosystems, Pulawy, Poland. Non disponible
Achiche, S., Baron, L., Balazinski, M., & Benaoudia, M. (février 2005). Chips image processing to predict pulp brightness using fuzzy logic techniques [Communication écrite]. 91st Annual Meeting of the Pulp and Paper Technical Association of Canada (PAPTAC 2005). Non disponible
Khoukhi, A., Baron, L., & Balazinski, M. (mai 2005). Programmation dynamique temps énergie minimum des robots parallèles par lagrangien augmenté [Communication écrite]. CCToMM Mechanisms, Machines, and Mechatronics Symposium (M3 2005), Saint-Hubert. Lien externe
Klim, Z., & Balazinski, M. (juin 2005). Risk assessment for continuing airworthiness [Communication écrite]. 6e Congrès international de génie industriel, Besançon, France. Non disponible
Balazinski, M., & Przybylo, A. (juin 2023). Teaching manufacturing processes using computer animations [Communication écrite]. SME/CIRP International Conference on Manufacturing Engineering Education, San Luis Obispo, Californie. Non disponible
Smoczynska, A., Bojanowska, I., Balazinski, M., Achiche, S., & Elektorowicz, M. (mars 2005). Zinc sorption to soil; application of an artificial intelligence method [Communication écrite]. International Workshop on Fate and Impact of Persistent Polluents in the Agroecosystems, Pulawy, Poland. Non disponible
Przybylo, A., Achiche, S., Balazinski, M., & Baron, L. (novembre 2004). Enhancing fuzzy learning with data mining techniques [Communication écrite]. Symposium on Methods of Artificial Intelligence (AI-METH 2004), Poland. Non disponible
Dobrescu, E., & Balazinski, M. (juin 2004). Fuzzy logic aircraft environment controller [Communication écrite]. Annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2004), Banff, Canada. Lien externe
Nault, M. L., Labelle, H., Aubin, C.-É., & Balazinski, M. (juin 2004). Fuzzy logic as an aid to surgery planning in idiopathic scoliosis [Communication écrite]. 5th International Research Society for Spinal Deformities Symposium (IRSSD 2004), Vancouver, Canada. Non disponible
Achiche, S., Baron, L., & Balazinski, M. (juin 2004). Scheduling exploration/exploitation levels in genetically-generated fuzzy knowledge bases [Communication écrite]. 2004 annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2004), Banff, Alta., Canada. Lien externe
Elektorowicz, M., Qasaimeh, A., & Balazinski, M. (juin 2003). Assessment of the capability of metal sorption to sediments of natural systems using fuzzy knowledge [Communication écrite]. 8th Environmental and Sustainable Engineering Specially Conference of the Canadian Society for Civil Engineering, Moncton, New Brunswick. Non disponible
Achiche, S., Baron, L., & Balazinski, M. (juin 2003). Real/binary-like coded genetic algorithm to automatically generate fuzzy knowledge bases [Communication écrite]. 4th International Conference on Control and Automation (ICCA 2003), Montréal, Québec. Lien externe
Balazinski, M., & Przybylo, A. (janvier 2002). Animations as support for the teaching of the manufacturing [Communication écrite]. ASEE Annual Conference and Exposition, Montréal, Québec. Lien externe
Sinzinkayo, A., Mascle, C., & Balazinski, M. Application of Fuzzy Logic for an Assembly Methodology [Communication écrite]. Integrated Design and Manufacturing in Mechanical Engineering. Lien externe
Elektorowicz, M., Balazinski, M., & Qasaimeh, A. (janvier 2002). Application of the artificial intelligence to estimate the constructed wetland response to heavy metal removal [Communication écrite]. Joint CSCE/ASCE International Conference on Environmental Engineering, Niagara Falls, Ontario. Non disponible
Furet, B., Hascoet, J.-Y., & Balazinski, M. (janvier 2002). A Concurrent Engineering Project: Application In Integrated Mechanical Design [Communication écrite]. ASEE Annual Conference and Exposition, Montréal, Québec. Lien externe
Balazinski, M., Baron, L., & Achiche, S. (mai 2002). Rule-set optimization in genetically-generated fuzzy knowledge bases [Communication écrite]. Optimization Days 2002, Montréal, Québec. Non disponible
Balazinski, M., Achiche, S., & Baron, L. (juillet 2001). Application of genetically-generated fuzzy knowledge bases in manufacturing [Communication écrite]. Joint 9th IFSA World Congress and 20th NAFIPS International Conference of the North American Fuzzy Information Processing Society, Vancouver, BC, Canada. Lien externe
Balazinski, M., Achiche, S., Baron, L., Elektorowicz, M., & El-Agroudy, A. (juin 2001). Investigation of constructed wetlands efficiency in mercury removal using genetically generated fuzzy knowledge bases [Communication écrite]. 7th Specialty Conference on Environmental Engineering, Victoria, B.C.. Non disponible
Songmene, V., & Balazinski, M. (janvier 2001). Machining of graphitic SiC-reinforced aluminium metal matrix composites with diamond tools [Communication écrite]. PRIME 2001, Sestri Levante (Genoa), Italy. Non disponible
Sinzinkayo, A., Mascle, C., & Balazinski, M. (janvier 2000). Application de la logique floue pour le choix d'une méthode d'assemblage [Communication écrite]. 3rd International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME 2000), Montréal, Québec. Non disponible
Sinzinkayo, A., Mascle, C., & Balazinski, M. (janvier 2000). Fuzzy logic application to choose an assembly method [Communication écrite]. 3rd International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME 2000), Montréal, Québec. Non disponible
Sobol, W., Korwin, M., Balazinski, M., & Veillette, S. (janvier 1999). Fuzzy logic control of industrial heat treatment furnaces [Communication écrite]. 18th Annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 1999), New York, USA. Lien externe
Achiche, S., Balazinski, M., & Baron, L. (mai 2000). Génération automatique par un algorithme génétique de bases de connaissances pour un système d'aide à la décision [Communication écrite]. 3rd International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME 2000), Montréal, Québec. Non disponible
Wygowski, W., & Balazinski, M. (janvier 2000). Improvement of tapping accuracy through multicriteria choice of technological parameters [Communication écrite]. 2nd International Conference on Advanced Manufacturing Technology, Johor Bahru, Malaysia. Non disponible
Balazinski, M., Achiche, S., & Baron, L. (janvier 2000). Influence of optimization and selection criteria on genetically generated fuzzy knowledge bases [Communication écrite]. 2nd International Conference on Advanced Manufacturing Technology, Johor, Malaysia. Non disponible
Balazinski, M., Achiche, S., & Baron, L. (juillet 2001). Influence of optimization and selection criteria on genetically generated fuzzy knowledge bases [Communication écrite]. IFSA World Congress and 20th NAFIPS International Conference of the North American Fuzzy Information Processing Society, Vancouver, Canada. Non disponible
Jemielniak, K., & Balazinski, M. (janvier 2000). Laboratory versus industrial cutting force sensor in tool condition monitoring [Communication écrite]. 11th CIRP Sponsored Workshop on Supervising and Diagnostic of Machining Systems, Karpacz, Poland. Non disponible
Songmene, V., & Balazinski, M. (janvier 2000). Milling and drilling of graphical metal matrix composite [Communication écrite]. Materials machining (OM 2000), Cracow. Non disponible
Balazinski, M., & Jemielniak, K. (janvier 1998). Tool condition monitoring using fuzzy decision support system [Communication écrite]. 5th International Conference on Monitoring and Automatic Supervision in Manufacturing, Warsaw, Poland. Non disponible
Mascle, C., & Balazinski, M. (juin 1999). Logique floue en conception d'assemblage [Communication écrite]. 3e conférence internationale sur l'automatisation industrielle, Montréal, Québec. Non disponible
Balazinski, M., Czogala, E., Leski, J., Drwal, G., Czabanski, R., & Kowalczyk, R. (septembre 1998). Decision support system Fuzzy-Flou with improved defuzzification methods as a tool for fuzzy control [Communication écrite]. 6th European Congress on Intelligent Techniques and Soft Computing (EUFIT 1998), Aachen, Germany. Non disponible
Balazinski, M., Gravelle, S., & Trochu, F. (janvier 1998). Évaluation de la distance entre les passes d'usinage pour les outils à bout torique [Communication écrite]. 2e conférence internationale sur la conception et la fabrication intégrées en mécanique (IDMME 1998), Compiègne, France. Non disponible
Balazinski, M., Czogala, E., Crwal, G., Kowalczyk, R., & Leski, J. (janvier 1998). Fuzzy decision support system FUZZY-FLOU-the tool processing imperfect information [Communication écrite]. World Automation Congress, Anchorage, Alaska, USA. Non disponible
Balazinski, M., Kops, L., & Massicotte, P. (janvier 1998). Job dispatching using priority factors and fuzzy logic [Communication écrite]. CIRP International Seminar on Intelligent Computation in Manufacturing Engineering, Capri, Italy. Non disponible
Mpakp, C., & Balazinski, M. (janvier 1998). New method of varying feed during machining in order to reduce tool waer during the rough turning of 4140 steel [Communication écrite]. CSME Forum, Toronto, Ontario. Non disponible
Balazinski, M., Boyer, H., Czogala, E., & Drwal, G. (juillet 1997). Constructive and destructive fuzzy decision support system (FDSS) processing uncertain information [Communication écrite]. 6th IEEE International Conference on Fuzzy Systems (FUZZ-IEEE 1997), Barcelona, Spain. Lien externe
Kajl, S., Balazinski, M., & Czogala, E. (juillet 1997). Evaluation of school buildings energy consumption using fuzzy assistant operating uncertain knowledge [Communication écrite]. 6th IEEE International Conference on Fuzzy Systems (FUZZ IEEE 1997), Barcelona, Spain. Lien externe
Balazinski, M., Boyer, H., Czogala, E., & Drwal, G. (septembre 1997). Extended FDSS FUZZY-FLOU - the tool for processing uncertain knowledge [Communication écrite]. 5th European Congress on Intelligent Techniques and Soft Computing (EUFIT 1997), Aachen, Germany. Non disponible
Fortin, C., Mascle, C., Mayer, J. R. R., Cloutier, G., Balazinski, M., Mir, Y. M., & Bélanger, I. (juillet 1997). Interactive computer aided process planning system for manufacturing, assembly and inspection [Communication écrite]. 32nd International MATADOR Conference, Manchester, U.K.. Lien externe
Balazinski, M., Czogala, E., Mayer, J. R. R., & Shen, Y. (janvier 1997). Pre-travel compensation of kinematic touch trigger probes using fuzzy decision support system [Communication écrite]. 7th IFSA World Congress, Prague. Non disponible
Balazinski, M., Boyer, H., & Czogala, E. (janvier 1996). Application of fuzzy intelligent control to an automatic parachute guiding system [Communication écrite]. 4th International Fuzzy Systems and Intelligent Control Conference, Maui, Hawaii. Non disponible
Balazinski, M., Czogala, E., Drwal, G., & Mrozek, M. (septembre 1996). Fuzzy decision support system "FUZZY-FLOU" operating uncertain knowledge [Communication écrite]. 5th IEEE International Fuzzy Systems, New Orleans, Louisiana. Lien externe
Anh Dung, N., Malinowski, P., Kajl, S., & Balazinski, M. (janvier 1996). Fuzzy logic approach to manual material handling tasks [Communication écrite]. 5th International Conference on Human Aspects of Advanced Manufacturing, Maui, Hawaii, USA. Non disponible
Balazinski, M., & Plaza, M. (janvier 1996). Impact of feed variation on chip instability and tool waer [Communication écrite]. CSME Forum, Hamilton. Non disponible
Ennajimi, E., Fortin, C., Balazinski, M., & Kraftchenko, I. (janvier 1996). Modélisation de l'erreur d'usinage due aux déplacements élastiques du système machine-pièce-outil [Communication écrite]. Conférence internationale sur les mathématiques appliquées et les sciences de l'ingénieur (CIMASI 1996), Casablanca, Maroc. Non disponible
Labonté, F., Balazinski, M., & Cohen, P. (janvier 1996). Study on eye movement strategies for a depth discrimination task in a "pseudo"natural context" [Communication écrite]. ARVO Annual Meeting, Fort Lauderdale, FL, USA. Non disponible
Balazinski, M., Klim, Z., & Vinet, R. (janvier 1996). Utilisation de la logique floue pour noter les exposés oraux [Communication écrite]. Congrès canadien de l'éducation en ingénierie, Kingston, Canada. Non disponible
Klim, Z., Balazinski, M., Maranzana, R., & Songméné, V. (janvier 1995). Analyse de l'influence des paramètres de coupe dur la fiabilité des outils [Communication écrite]. Congrès international de génie industriel de Montréal, Montréal, Québec. Non disponible
Kajl, S., Malinowski, P., Czogala, E., & Balazinski, M. (janvier 1995). Applying the new tools to the building heating load prediction [Communication écrite]. 2nd International Conference on Indoor Air Quality, Ventilation and Energy Conservation in Buildings, Montréal, Québec. Non disponible
Mir, Y. A., Balazinski, M., & Mayer, R. (janvier 1995). Automatic CNC machining of complex surfaces by digitalisation [Communication écrite]. 3rd Annual Conference of Iranian Association of Mechanical Engineering, Tehran, Iran. Non disponible
Mayer, J. R. R., Mir, Y. A., & Balazinski, M. (janvier 1995). Automatic digitizing of sculptured parts with coordinate measuring machines [Communication écrite]. 6th International Conference on Industrial Metrology in Metromatica, Zaragoza, Spain. Non disponible
Balazinski, M., Czogala, E., & Gravelle, S. (mars 1995). Automatic tool selection using a fuzzy decision support system [Communication écrite]. IEEE International Conference on Fuzzy Systems, Yokohama, Japan. Lien externe
Balazinski, M., & Klim, Z. (janvier 1995). Étude sur l'application de la logique floue pour la prédiction de la maintenance préventive [Communication écrite]. Congrès international de génie industriel de Montréal, Montréal, Québec. Non disponible
Kajl, S., Malinowski, P., Czogala, E., & Balazinski, M. (janvier 1995). Fuzzy logic and neural networks a approach to thermal description of buildings [Communication écrite]. 3rd European Congress on Intelligent Techniques and Soft Computing (EUFIT 1995), Aachen, Germany. Non disponible
Balazinski, M., & Kops, L. (février 1995). Intelligent job allocation on machine tools using fuzzy logic [Communication écrite]. 1st World Congress on Intelligent Manufacturing Processes and Systems, Mayaguez/San Juan, Puerto Rico. Non disponible
Mayer, J. R. R., Mir, Y. A., Balazinski, M., Trochu, F., & Vafaeesefat, A. (janvier 1995). Modeling of sculptured surfaces from touch probe measurements [Communication écrite]. 2nd International Conference on the Concurrent Engineering, Potomac. Non disponible
Taras, A. R., Iordanescu, M., Balazinski, M., & McClure, G. (juin 1995). Nondestructive evaluation of the residual strength of wood utility poles [Communication écrite]. CSCE Annual Conference :12th Canadian Hydrotechnical Conference, 2nd Engineering Materials Symposium, 1st CSCE Construction Specialty Conference, Ottawa (Canada). Non disponible
Kajl, S., Malinowski, P., Czogala, E., & Balazinski, M. (mars 1995). Prediction of building thermal performance using fuzzy decision support system [Communication écrite]. FUZZ-IEEE/IFES 1995, Yokohama, Japan. Lien externe
Mir, Y. A., Mayer, J. R. R., & Balazinski, M. (janvier 1995). Rapid programming of coordinate measuring machine for digitizing sculptured surface parts [Communication écrite]. Congrès international de génie industriel de Montréal, Montréal, Québec. Non disponible
Balazinski, M., & Mir, Y. A. (janvier 1995). Selecting of machining parameters by fuzzy logic techniques [Communication écrite]. 3rd Annual Conference of Iranian Association of Mechanical Engineering, Tehran, Iran. Non disponible
Balazinski, M., & Czogala, E. (janvier 1994). Application of neural networks to selection of operating parameters in machining processes [Communication écrite]. 1st National Conference of Neural Networks, Kule, Poland. Non disponible
Balazinski, M., Gravelle, S., & Trochu, F. (août 1994). Automatic process planning using a fuzzy logic expert system [Communication écrite]. 10th ISPE/IFAC International Conference on CAD/CAM: Robotics and Factories of the Future, Ottawa, Ont., Canada. Non disponible
Balazinski, M., Bellerose, M., & Czogala, E. (janvier 1994). Choice and modification of cutting parameters in machining processes using fuzzy decision support system (fdss) [Communication écrite]. 32nd Symposium on Modelling in Mechanics, Poland. Non disponible
Balazinski, M., Bellerose, M., & Czogala, E. (janvier 1994). Choice of cutting parameters in machining using fuzzy logic methods [Communication écrite]. CSME Forum, Montréal, Québec. Non disponible
Balazinski, M., Czogala, E., & Kajl, S. (juin 1994). Fuzzy control of ventilation process in air-ventilated closed areas with emission of noxious gasses [Communication écrite]. 3rd IEEE International Conference on Fuzzy Systems, Orlando, FL, USA. Lien externe
Mascle, C., Balazinski, M., & Czogala, E. (janvier 1994). Fuzzy logic selection process for assembly sequences [Communication écrite]. CSME Forum, Montréal, Québec. Non disponible
Balazinski, M., Czogala, E., & Gravelle, S. (janvier 1994). Fuzzy logic techniques in the automatic manufacturing of molds [Communication écrite]. International Fuzzy Systems and Intelligent Control Conference, Louisville, KY, USA. Non disponible
Balazinski, M., Czogala, E., Kajl, S., & Roberge, M. A. (janvier 1994). FUZZY prediction of building cooling load [Communication écrite]. CSME Forum, Montréal, Québec. Non disponible
Balazinski, M., Ennajimi, E., & Fortin, C. (janvier 1994). Influence of the feed variation on tool wear in interrupted cutting conditions [Communication écrite]. CSME Forum, Montréal, Québec. Non disponible
Kajl, S., Czogala, E., Balazinski, M., & Roberge, M. A. (janvier 1994). Rooms temperature stabilisation using a fuzzy approach [Communication écrite]. Healthy Buildings 1994 CIB-ISIAQ-HAS conference, Budapest, Hungary. Non disponible
Balazinski, M., Mascle, C., & Czogala, E. (août 1994). Selection of the best assembly sequences using fuzzy logic [Communication écrite]. 10th ISPE/IFAC International Conference on CAD/CAM: Robotics and Factories of the Future, Ottawa, Ont., Canada. Non disponible
Dupinet, É., & Balazinski, M. (août 1994). Tolerance allocation using fuzzy logic [Communication écrite]. 10th ISPE/IFAC International Conference on CAD/CAM: Robotics and Factories of the Future, Ottawa, Ont., Canada. Non disponible
Balazinski, M., Bellerose, M., & Czogala, E. (juillet 1993). Decision support system for cutting parameters selection in machining processes using fuzzy knowledge [Communication écrite]. 5th IFSA world Congress, Seoul, Korea. Lien externe
Niknam, S. A., Wygowski, W., Balazinski, M., & Songmene, V. (2014). Milling Burr Formation and Avoidance. Dans Machinability of Advanced Materials (p. 57-93). Lien externe
Ren, Q., Baron, L., Balazinski, M., & Jemielniak, K. (2013). Reliable Tool Life Estimation with Multiple Acoustic Emission Signal Feature Selection and Integration Based on Type-2 Fuzzy Logic. Dans Sadeghian, A., Mendel, J. M., & Tahayori, H. (édit.), Advances in Type-2 Fuzzy Sets and Systems (p. 203-217). Lien externe
Balazinski, M., Songmene, V., & Kishawy, H. A. (2011). Analyzing the machinability of metal matrix composites. Dans Machining Technology for Composite Materials: Principles and Practice (p. 394-411). Lien externe
Ben Mhenni, A., Mascle, C., & Balazinski, M. (2007). Agility in High Speed Machining: Optimization between Tool and Holder. Dans Advances in Integrated Design and Manufacturing in Mechanical Engineering II (p. 475-488). Lien externe
Balazinski, M., Achiche, S., & Baron, L. (2001). Fuzzy knowledge base generation and optimization using a genetic algorithm. Dans Zbiory rozmyte i ich zastosowania (p. 453-467). Non disponible
