<  Retour au portail Polytechnique Montréal

Documents dont le département est "Département de génie chimique"

Monter d'un niveau
Pour citer ou exporter [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Grouper par: Auteurs ou autrices | Sous-type de document | Aucun groupement
Aller à : A | B | C | D | E | F | G | H | J | K | L | M | N | O | P | R | S | T | V | W | X | Y | Z
Nombre de documents: 228

A

Abriat, C., Enriquez, K., Virgilio, N., Cegelski, L., Fuller, G. G., Daigle, F., & Heuzey, M.-C. (2020). Mechanical and microstructural insights of Vibrio cholerae and Escherichia coli dual-species biofilm at the air-liquid interface. Colloids and Surfaces B: Biointerfaces, 188, 8 pages. Lien externe

Adel, A., Alalm, M. G., El-Etriby, H. K., & Boffito, D. C. (2020). Optimization and mechanism insights into the sulfamethazine degradation by bimetallic ZVI/Cu nanoparticles coupled with H₂O₂. Journal of Environmental Chemical Engineering, 8(5), 9 pages. Lien externe

Adibnia, V., Mirbagheri, M., Salimi, S., De Crescenzo, G., & Banquy, X. (2020). Nonspecific interactions in biomedical applications. Current Opinion in Colloid and Interface Science, 47, 70-83. Lien externe

Adibnia, V., Olszewski, M., De Crescenzo, G., Matyjaszewski, K., & Banquy, X. (2020). Superlubricity of zwitterionic bottlebrush polymers in the presence of multivalent ions. Journal of the American Chemical Society, 142(35), 14843-14847. Lien externe

Agez, M. (2020). Amélioration des bases de données d'inventaires de cycle de vie par hybridation avec l'Input Output [Thèse de doctorat, Polytechnique Montréal]. Disponible

Agez, M., Majeau-Bettez, G., Margni, M., Strømman, A. H., & Samson, R. (2020). Lifting the veil on the correction of double counting incidents in hybrid life cycle assessment. Journal of Industrial Ecology, 24(3), 517-533. Disponible

Agez, M., Wood, R., Margni, M., Strømman, A. H., Samson, R., & Majeau-Bettez, G. (2020). Hybridization of complete PLCA and MRIO databases for a comprehensive product system coverage. Journal of Industrial Ecology, 24(4), 774-790. Disponible

Ahunon, L., Milano, F., Chevrier, A., & Lavertu, M. (2020). A novel image analysis algorithm reveals that media conditioned with chitosan and platelet-rich plasma biomaterial dose dependently increases fibroblast migration in a scratch assay. Biomedical Physics & Engineering Express, 6(6), 15 pages. Lien externe

Ajji, A., & Heli, B. (2020). Solid Phase Immunoassay Apparatus and Method for Rapid Detection of Bacteria. (Demande de brevet no US20200103404). Lien externe

Al-Sakkari, E. G., Abdeldayem, O. M., El-Sheltawy, S. T., Abadir, M. F., Soliman, A., Rene, E. R., & Ismail, I. (2020). Esterification of high FFA content waste cooking oil through different techniques including the utilization of cement kiln dust as a heterogeneous catalyst: A comparative study. Fuel, 279, 11 pages. Lien externe

Al-Sakkari, E. G., Abdeldayem, O. M., Genina, E. E., Amin, L., Bahgat, N. T., Rene, E. R., & El-Sherbiny, I. M. (2020). New alginate-based interpenetrating polymer networks for water treatment: a response surface methodology based optimization study. International Journal of Biological Macromolecules, 155, 772-785. Lien externe

Alcazar Gonzalez, A., Martinez Alonso, E., Marco Contelles, J. L., & Chioua, M. (2020). Quinolylnitrones for the treatment and prevention of a cerebral stroke or ischaemia. [Quinolylnitrones pour le traitement et la prévention d'une attaque cérébrale ou d'une ischémie cérébrale]. (Demande de brevet no WO2020074666). Lien externe

Amihai, I., Subbiah, S., Kotriwala, A. M., & Chioua, M. (2020). Apparatus for predicting equipment damage. [Appareil pour prédire une détérioration d'équipement]. (Demande de brevet no WO2020193314). Lien externe

Amini, A. R., Latifi, M., Carrillo García, A., Baptiste, G., & Chaouki, J. (2020). Fluidized Bed High-Temperature Process on Phosphate Rock. Dans Chaouki, J. (édit.), Heavy Metals Removal from Phosphate (149-166). Non disponible

Araya Marchena, M. E. (2020). Evaluation of the Effect of Polymer Structures on the Composting Degradability of Nitrogen-Rich Energetic Binders [Thèse de doctorat, Polytechnique Montréal]. Disponible

Arndt, D., Bangerth, W., Blais, B., Clevenger, T. C., Fehling, M., Grayver, A. V., Heister, T., Heltai, L., Kronbichler, M., Maier, M., Munch, P., Pelteret, J.-P., Rastak, R., Tomas, I., Turcksin, B., Wang, Z., & Wells, D. (2020). The deal.II Library, Version 9.2. Journal of Numerical Mathematics, 28(3), 131-146. Lien externe

Attia, M., Farag, S., & Chaouki, J. (2020). Upgrading of oils from biomass and waste: catalytic hydrodeoxygenation. Catalysts, 10(12), 1381 (28 pages). Disponible

Attia, M., Farag, S., Jaffer, S., & Chaouki, J. (2020). Metal and sulfur removal from petroleum oil using a novel demetallization-desulfurization agent and process. Journal of Cleaner Production, 275, 124177 (14 pages). Lien externe

Audet, M. (2020). Cadre méthodologique pour le développement d'un outil d'aide à la prise de décision appliqué à l'optimisation du système de gestion des résidus de CRD au Québec [Mémoire de maîtrise, Polytechnique Montréal]. Disponible

Aufoujal, A. (2020). Physical and Chemical Approaches for Water Micro-Droplet Capture [Mémoire de maîtrise, Polytechnique Montréal]. Disponible

Aufoujal, A., Legrand, U., Meunier, J.-L., & Tavares, J. R. (2020). Suppression of Hydrophobic Recovery in Photo-Initiated Chemical Vapor Deposition. Catalysts, 10(5), 534 (17 pages). Lien externe

Avazpour, R., Latifi, M., Chaouki, J., & Fradette, L. (2020). An environmentally friendly route for beneficiation of rare earth-bearing minerals by Pickering emulsification: adjusting the interfacial and formulation parameters. Green Chemistry, 22(17), 5771-5784. Lien externe

Azizipour, N., Avazpour, R., Rosenzweig, D. H., Sawan, M., & Ajji, A. (2020). Evolution of biochip technology : a review from lab-on-a-chip to organ-on-a-chip. Micromachines, 11(6), 599 (33 pages). Disponible

B

Bakker, M. G., Fowler, B., Bowman, M. K., & Patience, G. S. (2020). Experimental methods in chemical engineering: Electron paramagnetic resonance spectroscopy-EPR/ESR. Canadian Journal of Chemical Engineering, 98(8), 1668-1681. Lien externe

Bardyn, M., Chen, J., Dussiot, M., Crettaz, D., Schmid, L., Längst, E., Amireault, P., Tissot, J.-D., Jolicoeur, M., & Prudent, M. (2020). Restoration of physiological levels of uric acid and ascorbic acid reroutes the metabolism of stored red blood cells. Metabolites, 10(6), 226 (18 pages). Disponible

Beaulieu, C. (2020). Impact de la ségrégation granulaire sur le transfert de chaleur dans un lit rotatif [Thèse de doctorat, Polytechnique Montréal]. Disponible

Beaulieu, C., Vidal, D., Yari, B., Chaouki, J., & Bertrand, F. (2020). Impact of surface roughness on heat transfer through spherical particle packed beds. Chemical Engineering Science, 231, 116256. Lien externe

Belot, I. B. (2020). Étude numérique de l'impact de la distribution de catalyseur sur les performances des filtres à particules catalytiques [Thèse de doctorat, Polytechnique Montréal]. Disponible

Benzennou, S., Laviolette, J.-P., & Chaouki, J. (2020). Microwave effect on kinetics of paper cups pyrolysis. Canadian Journal of Chemical Engineering, 98(8), 1757-1766. Lien externe

Bérard, A. (2020). Principes fondamentaux de la RTD en phase gazeuse dans les réacteurs à lit fluidisé [Thèse de doctorat, Polytechnique Montréal]. Disponible

Bérard, A., Blais, B., & Patience, G. S. (2020). Experimental methods in chemical engineering: Residence time distribution-RTD. Canadian Journal of Chemical Engineering, 98(4), 848-867. Lien externe

Bérard, A., Patience, G. S., & Blais, B. (2020). Experimental methods in chemical engineering: Unresolved CFD-DEM. Canadian Journal of Chemical Engineering, 98(2), 424-440. Lien externe

Bernard, G., Rompre, P., Tavares, J. R., & Montpetit, A. (2020). Colorimetric and spectrophotometric measurements of orthodontic thermoplastic aligners exposed to various staining sources and cleaning methods. Head & Face Medicine, 16(1), 2 (11 pages). Lien externe

Bernhard, M., Kang, Y.-B., Presoly, P., Gheribi, A. E., & Bernhard, C. (2020). Critical evaluation and thermodynamic modeling of the FeP and FeCP system. CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry, 70, 14 pages. Lien externe

Bindes, M. M. M., Terra, N. M., Patience, G. S., Boffito, D. C., Cardoso, V. L., & Reis, M. H. M. (2020). Asymmetric Al₂O₃ and PES/Al₂O₃ hollow fiber membranes for green tea extract clarification. Journal of Food Engineering, 277, 109889. Lien externe

Bjørn, A., Chandrakumar, C., Boulay, A.-M., Doka, G., Fang, K., Gondran, N., Hauschild, M. Z., Kerkhof, A., King, H., Margni, M., McLaren, S., Mueller, C., Owsianiak, M., Peters, G., Roos, S., Sala, S., Sandin, G., Sim, S., Vargas-Gonzalez, M., & Ryberg, M. (2020). Review of life-cycle based methods for absolute environmental sustainability assessment and their applications. Environmental Research Letters, 15(8), 083001 (24 pages). Disponible

Bjørn, A., Sim, S., Boulay, A.-M., King, H., Clavreul, J., Lam, W. Y., Barbarossa, V., Bulle, C., & Margni, M. (2020). A planetary boundary-based method for freshwater use in life cycle assessment: Development and application to a tomato production case study. Ecological Indicators, 110, 10 pages. Lien externe

Blais, B., Barbeau, L., Bibeau, V., Gauvin, S., Geitani, T. E., Golshan, S., Kamble, R., Mikahori, G., & Chaouki, J. (2020). Lethe: An open-source parallel high-order adaptative CFD solver for incompressible flows. SoftwareX, 12, 9 pages. Lien externe

Blais, B., Delacroix, B., Fradette, L., & Bertrand, F. (novembre 2020). A comparison of the performance of mixing systems for viscous solid-liquid mixing using CFD-DEM [Communication écrite]. AIChE Annual Meeting. Lien externe

Boffito, D. C., & Fernandez-Rivas, D. (2020). Process intensification connects scales and disciplines towards sustainability. Canadian Journal of Chemical Engineering, 98(12), 2489-2506. Lien externe

Bouarab, A. F. (2020). Modélisation de la viscosité des mélanges binaires et ternaires de liquides ioniques [Mémoire de maîtrise, Polytechnique Montréal]. Disponible

Bouarab, A. F., Martins, M. A. R., Stolarska, O., Smiglak, M., Harvey, J.-P., Coutinho, J. A. P., & Robelin, C. (2020). Physical properties and solid-liquid equilibria for hexafluorophosphate-based ionic liquid ternary mixtures and their corresponding subsystems. Journal of Molecular Liquids, 316, 17 pages. Lien externe

Bouarab, A. F., Stolarska, O., Harvey, J.-P., Smiglak, M., & Robelin, C. (2020). Viscosity of a Ternary Reciprocal System Consisting of 1-Alkylpyridinium Halides. Industrial and Engineering Chemistry Research, 59(25), 11823-11838. Lien externe

Boulay, A.-M., & Lenoir, L. (2020). Sub-national regionalisation of the AWARE indicator for water scarcity footprint calculations. Ecological Indicators, 111, 106017 (4 pages). Lien externe

Boulay, A.-M., Benini, L., & Sala, S. (2020). Marginal and non-marginal approaches in characterization: how context and scale affect the selection of an adequate characterization model. The AWARE model example. International Journal of Life Cycle Assessment, 25(12), 2380-2392. Lien externe

Braidy, N., Bechu, A., de Souza Terra, J. C., & Patience, G. S. (2020). Experimental methods in chemical engineering: Transmission electron microscopyTEM. Canadian Journal of Chemical Engineering, 98(3), 628-641. Lien externe

Brassard, D. (2020). Développement d'un nanocomposite conducteur pour le soudage par résistance des composites thermoplastiques [Thèse de doctorat, Polytechnique Montréal]. Disponible

Brassard, D., Dube, M., & Tavares, J. R. (2020). Modelling resistance welding of thermoplastic composites with a nanocomposite heating element. Journal of Composite Materials, 55(5), 625-639. Lien externe

Bruel, C. (2020). On the Role of Chemical Affinity on the Dispersion, Self-Assembly, and Interfacial Behavior of Colloidal Cellulose Nanocrystals [Thèse de doctorat, Polytechnique Montréal]. Disponible

Bruel, C., Davies, T. S., Carreau, P., Tavares, J. R., & Heuzey, M.-C. (2020). Self-assembly behaviors of colloidal cellulose nanocrystals: A tale of stabilization mechanisms. Journal of Colloid and Interface Science, 574, 399-409. Lien externe

Bruel, C., Queffeulou, S., Carreau, P., Tavares, J. R., & Heuzey, M.-C. (2020). Orienting Cellulose Nanocrystal Functionalities Tunes the Wettability of Water-Cast Films. Langmuir, 36(41), 12179-12189. Disponible

Brunet, C. M., Savadogo, O., Baptiste, P., Bouchard, M. A., Rakotoary, J. C., Ravoninjatovo, A., Cholez, C., Gendron, C., & Merveille, N. (2020). Impacts generated by a large-scale solar photovoltaic power plant can lead to conflicts between sustainable development goals: A review of key lessons learned in Madagascar. Sustainability, 12(18), 7471. Disponible

C

Cambay, F., Forest-Nault, C., Dumoulin, L., Seguin, A., Henry, O., Durocher, Y., & De Crescenzo, G. (2020). Glycosylation of Fcγ receptors influences their interaction with various IgG1 glycoforms. Molecular Immunology, 121, 144-158. Lien externe

Cambay, F., Raymond, C., Brochu, D., Gilbert, M., Tu, T. M., Cantin, C., Lenferink, A., Grail, M., Henry, O., De Crescenzo, G., & Durocher, Y. (2020). Impact of IgG1 N-glycosylation on their interaction with Fc gamma receptors. Current Research in Immunology, 1, 23-37. Lien externe

Cao, B.-Y., Grmela, M., Guo, Z.-Y., Hua, Y.-C., & Nie, B.-D. (2020). Two Temperature Extension of Phonon Hydrodynamics. Journal of Non-Equilibrium Thermodynamics, 45(3), 291-304. Lien externe

Carrillo García, A., Latifi, M., & Chaouki, J. (2020). Characterization and Analysis of Phosphate Ore for Determination of Heavy Metals. Dans Chaouki, J. (édit.), Heavy Metals Removal from Phosphate (19-30). Non disponible

Carrillo García, A., Latifi, M., & Chaouki, J. (2020). Kinetics of calcination of natural carbonate minerals. Minerals Engineering, 150, 106279 (15 pages). Lien externe

Carrillo García, A., Latifi, M., Samih, S., & Chaouki, J. (2020). Production of rare earth oxides from raw ore in fluidized bed reactor. Journal of Industrial and Engineering Chemistry, 85, 141-151. Lien externe

Castillo, J., Lozano, T., Garcia, R., Morales-Zamudio, L., Lopez-Barroso, J., Lafleur, P., Karami, S., Sanchez-Valdes, S., Martinez-Colunga, G., Rodriguez, F., Perez-Berumen, C., Flores, S., & Garcia, A. (2020). Influence of graphene-based compounds on the mechanical toughness and thermal stability of polypropylene. Journal of Applied Polymer Science, 137(10), 48258 (13 pages). Lien externe

Chaouki, J. (octobre 2020). L'économie circulaire appliquée au recycle des déchets plastiques [Communication écrite]. Congrès international de l'industrie, de l'environnement et de la santé (CIIES 2020), Mohammedia, Maroc. Non disponible

Chaouki, J., Farag, S., Attia, M., & Doucet, J. (2020). The development of industrial (thermal) processes in the context of sustainability: The case for microwave heating. Canadian Journal of Chemical Engineering, 98(4), 832-847. Lien externe

Chaouki, J., Latifi, M., & Sotudeh-Gharebagh, S. (janvier 2020). A New Approach in Process Scale-up Learned from Unsuccessful Industrial Processes [Présentation]. Dans AIChE Virtual Process Development Symposium, United States. Non disponible

Chen, J., Adjalle, K., Lai, T. T., Barnabe, S., Perrier, M., & Paris, J. (2020). Effect of Mechanical Pretreatment for Enzymatic Hydrolysis of Woody Residues, Corn Stover and Alfalfa. Waste and Biomass Valorization, 11(11), 5847-5856. Lien externe

Chen, Z., Tian, Y., Lai, D., Zhan, J.-, Han, Z., Xu, G., & Gao, S. (2020). Oil shale pyrolysis in a moving bed with internals enhanced by rapid preheating in a heated drop tube. Energy Conversion and Management, 224, 113358 (10 pages). Lien externe

Chen, Z., Wang, H., Song, W., Hou, Y., & Qian, W. (2020). Decentralized methanol feed in a two-stage fluidized bed for process intensification of methanol to aromatics. Chemical Engineering and Processing - Process Intensification, 154, 7 pages. Lien externe

Combe, M. (2020). Caractérisation de mousses solides obtenues par expansion de billes de celluloïd [Mémoire de maîtrise, Polytechnique Montréal]. Disponible

Comeau-Gauthier, M., Tarchala, M., Luna, J. L. R.-G., Harvey, E., & Merle, G. (2020). Unleashing beta-catenin with a new anti-Alzheimer drug for bone tissue regeneration. Injury-International Journal of the Care of the Injured, 51(11), 2449-2459. Lien externe

Comtois, É. (2020). Performance, Erosivity and Mechanical Properties of Plasticized Nitrocellulose and the Performance of Azidodeoxycellulose as a Propellant Additive [Thèse de doctorat, Polytechnique Montréal]. Disponible

Comtois, E., Favis, B. D., & Dubois, C. (2020). Phase transitions and mechanical properties of nitrocellulose plasticized by glycidyl azide polymer and nitroglycerine. Polymer Engineering and Science, 60(9), 2301-2313. Lien externe

D

da Veiga Moreira, J., Schwartz, L., & Jolicoeur, M. (2020). Targeting Mitochondrial Singlet Oxygen Dynamics Offers New Perspectives for Effective Metabolic Therapies of Cancer. Frontiers in Oncology, 10, 573399 (15 pages). Disponible

Dadvand, M., & Savadogo, O. (mai 2020). Electrodeposition of Novel Nano-Composite Coatings of Niw Containing SiC and CeO₂ with Outstanding Tribological Properties and Corrosion Performance [Résumé]. 237th ECS Meeting with the 18th International Meeting on Chemical Sensors (IMCS 2020), Montréal, Québec. Publié dans ECS Meeting Abstracts, MA2020-01(E03 : Elec). Lien externe

Damiri, F., Dobaradaran, S., Hashemi, S., Foroutan, R., Vosoughi, M., Sahebi, S., Ramavandi, B., & Boffito, D. C. (2020). Waste sludge from shipping docks as a catalyst to remove amoxicillin in water with hydrogen peroxide and ultrasound. Ultrasonics Sonochemistry, 68, 13 pages. Lien externe

Darabi Mahboub, M. J., Jazayeri, S. M., Chub, O., Dubois, J.–.L., & Patience, G. S. (2020). Oxidation kinetics of 2-methyl-1,3-propanediol to methacrylic acid in a fluidized bed reactor. Canadian Journal of Chemical Engineering, 99(7), 1475-1489. Lien externe

De Tommaso, J., Rossi, F., Moradi, N., Pirola, C., Patience, G. S., & Galli, F. (2020). Experimental methods in chemical engineering: Process simulation. Canadian Journal of Chemical Engineering, 98(11), 2301-2320. Lien externe

Delacroix, B., Bouarab, A., Fradette, L., Bertrand, F., & Blais, B. (2020). Simulation of granular flow in a rotating frame of reference using the discrete element method. Powder Technology, 369, 146-161. Disponible

Dessemond, C., Soucy, G., Harvey, J.-P., & Ouzilleau, P. (2020). Phase transitions in the α–γ–β spodumene thermodynamic system and impact of γ-spodumene on the efficiency of lithium extraction by acid leaching. Minerals, 10(6), 519 (23 pages). Disponible

Dunlop, M. J., Clemons, C., Reiner, R., Sabo, R., Agarwal, U. P., Bissessur, R., Sojoudiasli, H., Carreau, P., & Acharya, B. (2020). Towards the scalable isolation of cellulose nanocrystals from tunicates. Scientific Reports, 10(1), 19090 (13 pages). Disponible

E

Elfiad, A., Galli, F., Boukhobza, L. M., Djadoun, A., & Boffito, D. C. (2020). Low-cost synthesis of Cu/-Fe₂O₃ from natural HFeO₂: Application in 4-nitrophenol reduction. Journal of Environmental Chemical Engineering, 8(5), 10 pages. Lien externe

F

Farag, S., & Chaouki, J. (2020). Microwave heating‐assisted pyrolysis of biomass for biochar production. Dans Biochar : emerging applications (4-1-4-10-4-1-4-10). Lien externe

Farag, S., Attia, M., & Chaouki, J. (2020). Process for removing cadmium and other metals and impurites in phosphate-contaning materials. [Procédé d'élimination du cadmium et d'autres métaux et impuretés dans des matériaux contenant du phosphate]. (Demande de brevet no CA3123497). Lien externe

Farag, S., Attia, M., & Chaouki, J. (2020). Process for removing metals in petroleum oil using an organophosphorus compound and microwaves. [Processus d'élimination de métaux dans l'huile de pétrole à l'aide d'un composé organophosphoré et de micro-ondes]. (Demande de brevet no CA3110271). Lien externe

Farag, S., Attia, M., & Chaouki, J. (2020). Process for removing metals, sulfur and other impurities in crude oil. [Procédé d'élimination de métaux, de soufre et d'autres impuretés dans du pétrole brut]. (Demande de brevet no CA3110269). Lien externe

Farag, S., Attia, M., & Chaouki, J. (2020). Process for removing sulfur in crude oil using microwaves. [Procédé d'élimination du soufre dans du pétrol brut à l'aide de micro-ondes]. (Demande de brevet no CA3110400). Lien externe

Fenni, S. E., Wang, J., Haddaoui, N., Favis, B. D., Muller, A. J., & Cavallo, D. (2020). Nucleation modalities in poly(lactide), poly(butylene succinate), and poly(epsilon-caprolactone) ternary blends with partial wetting morphology. Polymer Crystallization, 3(6), e10145 (13 pages). Lien externe

Fenni, S. E., Wang, J., Haddaoui, N., Favis, B. D., Muller, A. J., & Cavallo, D. (2020). Nucleation of Poly(lactide) Partially Wet Droplets in Ternary Blends with Poly(butylene succinate) and Poly(epsilon-caprolactone). Macromolecules, 53(5), 1726-1735. Lien externe

Fernandez Rivas, D., Boffito, D. C., Faria-Albanese, J., Glassey, J., Afraz, N., Akse, H., Boodhoo, K. V. K., Bos, R., Cantin, J., Chiang, Y. W., Commenge, J.-M., Dubois, J.-L., Galli, F., de Mussy, J. P. G., Harmsen, J., Kalra, S., Keil, F. J., Morales-Menendez, R., Navarro-Brull, F. J., ... Weber, R. S. (2020). Process intensification education contributes to sustainable development goals. Part 1. Education for Chemical Engineers, 32, 1-14. Lien externe

G

Gallah, H., Mighri, F., Ajji, A., & Bandyopadhyay, J. (2020). Flexible electrospun PET/TiO2 nanofibrous structures: Morphology, thermal and mechanical properties. Polymers for Advanced Technologies, 31(7), 1612-1623. Lien externe

García, A. C., Latifi, M., Amini, A., & Chaouki, J. (2020). Separation of radioactive elements from rare earth element-bearing minerals. Metals, 10(11), 1524 (22 pages). Disponible

Gascon, S., Giraldo Solano, A., El Kheir, W., Therriault, H., Berthelin, P., Cattier, B., Marcos, B., Virgilio, N., Paquette, B., Faucheux, N., & Lauzon, M.-A. (2020). Erratum: Characterization and Mathematical Modeling of Alginate/Chitosan-Based Nanoparticles Releasing the Chemokine CXCL12 to Attract Glioblastoma Cells. Pharmaceutics, 12(12), 1153 (2 pages). Disponible

Gascon, S., Solano, A. G., El Kheir, W., Therriault, H., Berthelin, P., Cattier, B., Marcos, B., Virgilio, N., Paquette, B., Faucheux, N., & Lauzon, M.-A. (2020). Characterization and Mathematical Modeling of Alginate/Chitosan-Based Nanoparticles Releasing the Chemokine CXCL12 to Attract Glioblastoma Cells. Pharmaceutics, 12(4), 356 (21 pages). Lien externe

Gazil, O., Gancheva, T., Bilodeau-Calame, M., Favis, B. D., & Virgilio, N. (2020). Controlling the distribution of nanoparticles in hydrogels via interfacial synthesis. Nanoscale Advances, 2(11), 5263-5270. Lien externe

Ghanbari, A., Mousavi, Z., Heuzey, M.-C., Patience, G. S., & Carreau, P. (2020). Experimental methods in chemical engineering: Rheometry. Canadian Journal of Chemical Engineering, 98(7), 1456-1470. Lien externe

Gheribi, A. E., Pelton, A., & Harvey, J.-P. (2020). Determination of optimal compositions and properties for phase change materials in a solar electric generating station. Solar Energy Materials and Solar Cells, 210, 110506 (15 pages). Lien externe

Gheribi, A. E., Salanne, M., Zanghi, D., Machado, K., Bessada, C., & Chartrand, P. (2020). First-Principles Determination of Transference Numbers in Cryolitic Melts. Industrial & Engineering Chemistry Research, 59(29), 13305-13314. Lien externe

Giraldo, A., Faucheux, N., Virgilio, N., Lauzon, M.-A., Gascon, S., Therriault, H., & Paquette, B. (septembre 2020). 78: Development of a trap to attract and eliminate cancer cells infiltrated into the brain [Résumé]. CARO Virtual Scientific Meeting in partnership with the CAMRT "Equity in Radiation Oncology: Patients Providers and Practice". Publié dans Radiotherapy and Oncology, 150. Disponible

Giuntoli, M., Biagini, V., & Chioua, M. (2020). Artificial intelligence and optimization: a way to speed up the security constraint optimal power flow. [Künstliche Intelligenz und Optimierung: ein Weg zur Beschleunigung des optimalen Lastflusses unter Sicherheits-Rahmenbedingungen]. Automatisierungstechnik, 68(12), 1035-1043. Lien externe

Gobara, M., Baraka, A., Akid, R., & Zorainy, M. Y. (2020). Corrosion protection mechanism of Ce⁴⁺/organic inhibitor for AA2024 in 3.5% NaCl. RSC Advances, 10(4), 2227-2240. Lien externe

Goffin, A. (2020). Caractérisation thermomécanique du frittage de poudre d'acier 316L mise en forme par jet de liant [Mémoire de maîtrise, Polytechnique Montréal]. Disponible

Golshan, S., Esgandari, B., Zarghami, R., Blais, B., & Saleh, K. (2020). Experimental and DEM studies of velocity profiles and residence time distribution of non-spherical particles in silos. Powder Technology, 373, 510-521. Lien externe

Golshan, S., Sotudeh-Gharebagh, R., Zarghami, R., Mostoufi, N., Blais, B., & Kuipers, J. A. M. (2020). Review and implementation of CFD-DEM applied to chemical process systems. Chemical Engineering Science, 221, 35 pages. Lien externe

Grmela, M., Klika, V., & Pavelka, M. (2020). Dynamic and renormalization-group extensions of the Landau theory of critical phenomena. Entropy, 22(9), 978 (19 pages). Disponible

Grmela, M., Klika, V., & Pavelka, M. (2020). Gradient and generic time evolution towards reduced dynamics. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 378(2170), 22 pages. Lien externe

Guerrero-Perez, M. O., & Patience, G. S. (2020). Experimental methods in chemical engineering: Fourier transform infrared spectroscopy-FTIR. Canadian Journal of Chemical Engineering, 98(1), 25-33. Lien externe

Gugaliya, J., Bhutani, N., Kubal, N., Ghosh, K., & Chioua, M. (2020). A method and system for controlling a process plant using transition data. [Procédé et système de commande d'une installation de traitement mettant en oeuvre des données de transition]. (Brevet). Lien externe

Gugaliya, J., Bhutani, N., Kubal, N., Ghosh, K., & Chioua, M. (2020). Method for controlling a process plant using transition data. (Brevet no US10606251). Lien externe

H

Habibzadeh, S., Rahmani, E., Saeb, M. R., Ganjali, M. R., & Chaouki, J. (2020). Multilayer Thin Films on Fine Particles. Dans Multilayer Thin Films: Versatile Applications for Materials Engineering (488-250). Lien externe

Hadidi, L., Constantin, J., Dalisson, B., Vieira, D., Drager, J., Harvey, E., & Merle, G. (2020). Erratum: Biodegradable hypoxia biomimicry microspheres for bone tissue regeneration. Journal of Biomaterials Applications, 34(7), 0885328219. Lien externe

Hadidi, L., Constantin, J., Dalisson, B., Vieira, D., Harvey, E., & Merle, G. (2020). Biodegradable hypoxia biomimicry microspheres for bone tissue regeneration. Journal of Biomaterials Applications, 34(7), 1028-1037. Lien externe

Hameed, Z., Naqvi, S. R., Naqvi, M., Ali, I., Taqvi, S. A. A., Gao, N., Hussain, S. A., & Hussain, S. (2020). A Comprehensive Review on Thermal Coconversion of Biomass, Sludge, Coal, and Their Blends Using Thermogravimetric Analysis. Journal of Chemistry, 2020, 1-23. Lien externe

Hamzehlouia, S., & Chaouki, J. (2020). Microwave-assisted catalytic reactions using modified bed particles. (Brevet no US20200223692). Lien externe

Harvey, J.-P., Gheribi, A. E., Rincent, C., Jofré, J., & Lafaye, P. (2020). On the elaboration of the next generation of thermodynamic models of solid solutions. Physical Chemistry Chemical Physics, 35(22), 19999-20013. Lien externe

Harvey, J.-P., Lebreux-Desilets, F., Marchand, J., Oishi, K., Bouarab, A.-F., Robelin, C., Gheribi, A. E., & Pelton, A. (2020). On the application of the factsage thermochemical software and databases in materials science and pyrometallurgy. Processes, 8(9), 1156 (31 pages). Disponible

Havegeer Richard, C. (2020). Modélisation et validation expérimentale de la production de syngaz par gazéification des matières résiduelles [Mémoire de maîtrise, Polytechnique Montréal]. Disponible

Heli, B., & Ajji, A. (2020). Toward a nanopaper-based and solid phase immunoassay using FRET for the rapid detection of bacteria. Scientific Reports, 10(1), 11 pages. Lien externe

Henry, O., Karengera, E., Cambay, F., & De Crescenzo, G. (2020). Surface Plasmon Resonance-Based Method for Rapid Product Sialylation Assessment in Cell Culture. Dans Pörtner, R. (édit.), Animal Cell Biotechnology: Methods and Protocols (Vol. 2095, 285-293). Lien externe

Hoemann, C. D., Guzman-Morales, J., Picard, G., Chen, G., Veilleux, D., Chevrier, A., Sim, S., Garon, M., Quenneville, E., Lafantaisie-Favreau, C.-H., Buschmann, M. D., & Hurtig, M. B. (2020). Guided bone marrow stimulation for articular cartilage repair through a freeze-dried chitosan microparticle approach. Materialia, 9, 12 pages. Lien externe

Hosney, H., Al-Sakkari, E. G., & Mustafa, A. (2020). Kinetics and gibbs function studies on lipase-catalyzed production of non-phthalate plasticizer. Journal of Oleo Science, 69(7), 727-735. Lien externe

Hosseini, M. S., & Chartrand, P. (2020). Thermodynamics and phase relationship of carbonaceous mesophase appearing during coal tar pitch carbonization. Fuel, 275, 117899 (9 pages). Lien externe

Hung, C. R., Ellingsen, L. A.-W., & Majeau-Bettez, G. (2020). LiSET: A framework for early-stage life cycle screening of emerging technologies. Journal of Industrial Ecology, 24(1), 26-37. Disponible

J

Jalali Dil, E., Arjmand, M., Otero Navas, I., Sundararaj, U., & Favis, B. D. (2020). Interface Bridging of Multiwalled Carbon Nanotubes in Polylactic Acid/Poly(butylene adipate-co-terephthalate): Morphology, Rheology, and Electrical Conductivity. Macromolecules, 52(22), 10267-10277. Lien externe

Janka, D., Cohen, A., Lenders, F., Li, N., Bauer, R., Chioua, M., & Hollender, M. (2020). Method for controlling a metal rolling process for producing intermediate castings, a related computer system, and a method for producing intermediate castings. [Procédé pour commander un processus de laminage de métal pour la production de moulages intermédiaires, système informatique associé et procédé de production de moulages intermédiaires]. (Demande de brevet no EP3739410). Lien externe

K

Karimi Alavijeh, D. (2020). Development of Films/Fibrous Nanostructures with Gas and Volatiles Detection Ability [Mémoire de maîtrise, Polytechnique Montréal]. Disponible

Khan, H., Habib, M., Khan, A., & Boffito, D. C. (2020). A modified sol-gel synthesis to yield a stable Fe₃+/ZnO photocatalyst: Degradation of water pollutants and mechanistic insights under UV and visible light. Journal of Environmental Chemical Engineering, 8(5), 104282 (13 pages). Lien externe

Khan, H., Yerramilli, A. S., D'Oliveira, A., Alford, T. L., Boffito, D. C., & Patience, G. S. (2020). Experimental methods in chemical engineering: X‐ray diffraction spectroscopy-XRD. Canadian Journal of Chemical Engineering, 98(6), 1255-1266. Lien externe

Kim, D.-H., Kim, W., & Kang, Y.-B. (2020). Erratum: Electrochemical desulfurization of molten steel with molten slag: Reaction rate and current efficiency (vol 164, E816, 2018). Journal of The Electrochemical Society, 167(6), 069001 (1 page). Lien externe

Knoch, S. (2020). Sur la modification du PLA en vue de son application pour filet d'exclusion [Mémoire de maîtrise, Polytechnique Montréal]. Disponible

Knoch, S., Pelletier, F., Larose, M., Chouinard, G., Dumont, M.-J., & Tavares, J. R. (2020). Surface modification of PLA nets intended for agricultural applications. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 598, 124787. Lien externe

Kordjazi, Z., & Ajji, A. (2020). Partially miscible polymer blends of ethyl cellulose and hydroxyl terminated polybutadiene. Polymer, 211, 123067 (7 pages). Lien externe

L

Lafaye, P., Toffolon-Masclet, C., Crivello, J.-C., & Joubert, J.-M. (2020). Thermodynamic modelling of the Fe-Sn-Zr system based on new experiments and first-principles calculations. Journal of Alloys and Compounds, 821, 153200 (11 pages). Lien externe

Lakhdissi, E. M. (2020). Hydrodynamics and Mass Transfer of Two-Phase and Three-Phase Bubble Column Reactors [Thèse de doctorat, Polytechnique Montréal]. Disponible

Lakhdissi, E. M., Fallahi, A., Guy, C., & Chaouki, J. (2020). Effect of solid particles on the volumetric gas liquid mass transfer coefficient in slurry bubble column reactors. Chemical Engineering Science, 227, 11 pages. Lien externe

Lakhdissi, E. M., Soleimani, I., Guy, C., & Chaouki, J. (2020). Simultaneous effect of particle size and solid concentration on the hydrodynamics of slurry bubble column reactors. AICHE Journal, 66(2), 16 pages. Lien externe

Latifi, M., & Chaouki, J. (janvier 2020). Advances in Process Electrification at Polytechnique Montreal [Présentation]. Dans Scientific Committee of Canadian Emissions Reductions Innovation Consortium (CanERIC), Calgary, Alberta. Non disponible

Latifi, M., Amini, A. R., Baptiste, G., Carrillo García, A., & Chaouki, J. (2020). Iterative Scale-up Procedure for De-cadmiation of Phosphate Ore. Dans Chaouki, J. (édit.), Heavy Metals Removal from Phosphate (377-402). Non disponible

Latifi, M., Ferrante, L., Briens, C., & Berruti, F. (2020). A Pilot Study of Syngas Production from Bio-oil Thermal Cracking in a Bubbling Fluidized Bed Reactor. Journal of Petroleum Science and Technology, 9(1), 56-72. Lien externe

Leclaire, S., Vidal, D., Fradette, L., & Bertrand, F. (2020). Validation of the pressure drop-flow rate relationship predicted by lattice Boltzmann simulations for immiscible liquid-liquid flows through SMX static mixers. Chemical Engineering Research and Design, 153, 350-368. Lien externe

Lefebvre, V., Schué, L., Clément, C., & Martel, R. (2020). Plasma Thinning of Large Black Phosphorus Flakes. ECS Meeting Abstracts, MA2020-01(B06 : 2D L), 820-820. Lien externe

Legrand, U., Apfel, U.-P., Boffito, D. C., & Tavares, J. R. (2020). The effect of flue gas contaminants on the CO₂ electroreduction to formic acid. Journal of CO2 Utilization, 42, 101315 (10 pages). Lien externe

Li, H., Cabanas-Gac, F., Hadidi, L., Bilodeau-Calame, M., Abid, A., Mameri, K., Rigamonti, M. G., Rousselot, S., Dolle, M., & Patience, G. S. (2020). Ultrasound assisted wet media milling synthesis of nanofiber-cage LiFePO₄/C. Ultrasonics Sonochemistry, 68, 11 pages. Lien externe

Li, Y. (2020). Stretchable and Self-Healing Conducting Polymers for Organic Bioelectronics [Thèse de doctorat, Polytechnique Montréal]. Disponible

Li, Y., Li, X., Zhang, S., Liu, L., Hamad, N., Bobbara, S. R., Pasini, D., & Cicoira, F. (2020). Autonomic Self-Healing of PEDOT:PSS Achieved Via Polyethylene Glycol Addition. Advanced Functional Materials, 30(30), 2002853 (9 pages). Lien externe

Li, Y., Zhang, S., Hamad, N., Kim, K., Liu, L., Lerond, M., & Cicoira, F. (2020). Tailoring the Self-Healing Properties of Conducting Polymer Films. Macromolecular Bioscience, 20(11), 2000146 (8 pages). Lien externe

Li, Y., Zhang, S., Li, X., Unnava, V. R. N., & Cicoira, F. (2020). Highly Stretchable PEDOT:PSS Organic Electrochemical Transistors Achieved Via Polyethylene Glycol Addition. Meeting abstracts, MA2020-01(52), 2913-2913. Lien externe

Lotfi, S., Bahrpaima, K., Boffito, D. C., & Patience, G. S. (2020). Gas-solid oxidation of unwashed lignin to carboxylic acids. Energy & Fuels, 34(8), 9683-9696. Lien externe

Lucke, M., Chioua, M., Grimholt, C., Hollender, M., & Thornhill, N. F. (2020). Integration of alarm design in fault detection and diagnosis through alarm-range normalization. Control Engineering Practice, 98, 12 pages. Lien externe

Lucke, M., Stief, A., Chioua, M., Ottewill, J. R., & Thornhill, N. F. (2020). Fault detection and identification combining process measurements and statistical alarms. Control Engineering Practice, 94, 12 pages. Lien externe

M

Ma, Z., Perreault, P., Pelegrin, D. C., Boffito, D. C., & Patience, G. S. (2020). Thermodynamically unconstrained forced concentration cycling of methane catalytic partial oxidation over CeO₂ FeCralloy catalysts. Chemical Engineering Journal, 380, 11 pages. Lien externe

Massart, M. (2020). Amélioration des propriétés mécaniques en traction de mousses de celluloïd modifié [Mémoire de maîtrise, Polytechnique Montréal]. Disponible

Mazerolles, T., Heuzey, M.-C., Soliman, M., Martens, H., Kleppinger, R., & Huneault, M. A. (2020). Development of multilayer barrier films of thermoplastic starch and low-density polyethylene. Journal of Polymer Research, 27(2), 15 pages. Lien externe

McEachern, F., Harvey, E., & Merle, G. (2020). Emerging Technologies for the Electrochemical Detection of Bacteria. Biotechnology Journal, 15(9), 2000140 (15 pages). Lien externe

Meroni, D., Jimenez-Salcedo, M., Falletta, E., Bresolin, B. M., Kait, C. F., Boffito, D. C., Bianchi, C. L., & Pirola, C. (2020). Sonophotocatalytic degradation of sodium diclofenac using low power ultrasound and micro sized TiO2. Ultrasonics Sonochemistry, 67, 12 pages. Lien externe

Mohammadi, M., Bruel, C., Heuzey, M.-C., & Carreau, P. (2020). CNC dispersion in PLA and PBAT using two solvents: morphological and rheological properties. Cellulose, 27(17), 9877-9892. Lien externe

Mohammadi, R. S., Zolali, A. M., Tabatabaei, S. H., & Ajji, A. (2020). Nanoconfinement Induced Direct Formation of Form i and III Crystals inside in Situ Formed Poly(butene-1) Nanofibrils. Macromolecules, 53(4), 1346-1355. Lien externe

Montegut, L., Martinez-Basilio, P. C., Moreira, J. V., Schwartz, L., & Jolicoeur, M. (2020). Combining lipoic acid to methylene blue reduces the Warburg effect in CHO cells: From TCA cycle activation to enhancing monoclonal antibody production. PLOS ONE, 15(4), e0231770 (16 pages). Lien externe

Monzavi, M., & Raygan, S. (2020). BenefIciation of an Oolitic-Iron ORE by Magnetization Roasting and Magnetic Separation. Iranian Journal of Materials Science and Engineering, 17(3), 17-29. Lien externe

Moussavi Karimi, S. A. (2020). Design Framework for Plant-Wide Energy Analysis Using the Bridge Method [Thèse de doctorat, Polytechnique Montréal]. Disponible

Mukundan, S., Boffito, D. C., Shrotri, A., Atanda, L., Beltramini, J., & Patience, G. S. (2020). Thermocatalytic Hydrodeoxygenation and Depolymerization of Waste Lignin to Oxygenates and Biofuels in a Continuous Flow Reactor at Atmospheric Pressure. ACS Sustainable Chemistry & Engineering, 8(35), 13195-13205. Lien externe

N

Nasri Lari, H. (2020). Continuous In-line De-agglomeration and Coating of Nanoparticles [Thèse de doctorat, Polytechnique Montréal]. Disponible

Nasri Lari, H., Chaouki, J., & Tavares, J. R. (2020). Continuous aerosol photopolymerization to coat de-agglomerated nanoparticles. Chemical Engineering Journal, 390, 124526 (12 pages). Disponible

Nasri Lari, H., Rasouli, M., Chaouki, J., & Tavares, J. R. (2020). Solid hold‐up measurement in a jet‐impactor assisted fluidized bed using gamma‐ray densitometry. AIChE Journal, 66(11), e16653 (14 pages). Disponible

Nazari, A., Latifi, M., Fallahi, A., Carrillo García, A., Baptiste, G., & Chaouki, J. (2020). Cadmium Removal from Phosphate Ore by Acid Leaching. Dans Chaouki, J. (édit.), Heavy Metals Removal from Phosphate (107-139). Non disponible

Nofar, M., Heuzey, M.-C., Carreau, P., & Kamal, M. R. (2020). Nanoparticle Interactions and Molecular Relaxation in PLA/PBAT/Nanoclay Blends. Experimental results, 1(e47), 12 pages. Disponible

Nofar, M., Mohammadi, M., & Carreau, P. (2020). Effect of TPU hard segment content on the rheological and mechanical properties of PLA/TPU blends. Journal of Applied Polymer Science, 137(45), 49387 (11 pages). Lien externe

Nosrati, M., Vieira, D., Harvey, E. J., Merle, G., & Bhadra, S. (2020). Modified Clark Microsensors with Enhanced Sensing Current. IEEE Sensors Journal, 20(20), 12117-12126. Lien externe

O

Oliverio, R., Liberelle, B., Murschel, F., Garcia-Ac, A., Banquy, X., & De Crescenzo, G. (2020). Versatile and High-Throughput Strategy for the Quantification of Proteins Bound to Nanoparticles. ACS Applied Nano Materials, 3(10), 10497-10507. Lien externe

Ouellet, J. (2020). Croissance de nanotubes de carbones en continu pour produire des harpes permettant de collecter les microgouttelettes d'eau du brouillard [Mémoire de maîtrise, Polytechnique Montréal]. Disponible

P

Paim Pressi, L. (2020). Impact of Controlled Oxygen Content and Microstructure on the Mechanical Behavior of 13Cr-4Ni Steel [Mémoire de maîtrise, Polytechnique Montréal]. Disponible

Pan, Y., Lu, X., Hayat, M. D., Yang, F., Liu, C.C., Li, Y., Li, X.Y., Xu, W., Qu, X.H., & Cao, P. (2020). Effect of Sn addition on the high-temperature oxidation behavior of high Nb-containing TiAl alloys. Corrosion Science, 166, 11 pages. Lien externe

Patience, G. S., & Boffito, D. C. (2020). Distributed production: Scale‐up vs experience. Journal of Advanced Manufacturing and Processing, 2(2). Lien externe

Pauletto, G. (2020). Ni on FeCrAlloy Partially Oxides Methane at Short Contact Time and High Pressure [Thèse de doctorat, Polytechnique Montréal]. Disponible

Pauletto, G., Vaccari, A., Groppi, G., Bricaud, L., Benito, P., Boffito, D. C., Lercher, J. A., & Patience, G. S. (2020). FeCrAl as a Catalyst Support. Chemical Reviews, 120(15), 7516-7550. Lien externe

Pavelka, M., Klika, V., & Grmela, M. (2020). Generalization of the Dynamical Lack-of-Fit Reduction from GENERIC to GENERIC. Journal of Statistical Physics, 181(2), 19-52. Lien externe

Phan, A. T. (2020). Thermodynamic Modeling of Complex Solid Solutions for Lithium Battery Applications [Thèse de doctorat, Polytechnique Montréal]. Disponible

Phan, A. T., Gheribi, A. E., & Chartrand, P. (2020). Coherent and para-equilibrium phase transformations in Mn-doped-LiFePO₄ cathode materials: Implications for lithium ion battery performances. Journal of Alloys and Compounds, 838, 18 pages. Lien externe

Pirola, C., Peretti, C., & Galli, F. (2020). Immersive virtual crude distillation unit learning experience: The EYE4EDU project. Computers and Chemical Engineering, 140, 11 pages. Lien externe

Poli, F., Lan, T., Herrera, J. R., Santato, C., Cicoira, F., & Soavi, F. (2020). Transbattery, a Novel Class of Device to Study Electronic Properties of Nanostructured Materials for Energetics. ECS Meeting Abstracts, MA2020-01(A02 : Lith), 325-325. Lien externe

Previtali, D., Longhi, M., Galli, F., Di Michele, A., Manenti, F., Signoretto, M., Menegazzo, F., & Pirola, C. (2020). Low pressure conversion of CO2 to methanol over Cu/Zn/Al catalysts. The effect of Mg, Ca and Sr as basic promoters. Fuel, 274, 117804 (11 pages). Lien externe

R

Rafiee, M., Hosseini Rad, S., Nitzsche, F., Laliberte, J., & Labrosse, M. R. (2020). Significant fatigue life enhancement in multiscale doubly-modified fiber/epoxy nanocomposites with graphene nanoplatelets and reduced-graphene oxide. Polymers, 12(9), 2135 (10 pages). Disponible

Riekstin, A. C., Langevin, A., Dandres, T., Gagnon, G., & Cheriet, M. (2020). Time Series-Based GHG Emissions Prediction for Smart Homes. IEEE Transactions on Sustainable Computing, 5(1), 134-146. Lien externe

Rigamonti, M. G., Chavalle, M., Li, H., Antitomaso, P., Hadidi, L., Stucchi, M., Galli, F., Khan, H., Dolle, M., Boffito, D. C., & Patience, G. S. (2020). LiFePO₄ spray drying scale-up and carbon-cage for improved cyclability. Journal of Power Sources, 462, 228103 (12 pages). Lien externe

Rivas, D. F., Boffito, D. C., Faria-Albanese, J., Glassey, J., Cantin, J., Afraz, N., Akse, H., Boodhoo, K. V. K., Bos, R., Chiang, Y. W., Commenge, J. M., Dubois, J. L., Galli, F., Harmsen, J., Kalra, S., Keil, F., Morales-Menendez, R., Navarro-Brull, F. J., Noel, T., ... Weber, R. S. (2020). Process intensification education contributes to sustainable development goals. Part 2. Education for Chemical Engineers, 32, 15-24. Lien externe

Rouaut, G., Gheribi, A. E., & Chartrand, P. (2020). Modelling the electronic conduction in metals-molten salts mixtures. Application to cryolitic melts in Hall-Heroult cells. Journal of Fluorine Chemistry, 237, 109597 (11 pages). Lien externe

S

Saadatkhah, N., Carillo Garcia, A., Ackermann, S., Leclerc, P., Latifi, M., Samih, S., Patience, G. S., & Chaouki, J. (2020). Experimental methods in chemical engineering: Thermogravimetric analysis-TGA. Canadian Journal of Chemical Engineering, 98(1), 34-43. Lien externe

Sabri, F., Raphael, W., Berthomier, K., Fradette, L., Tavares, J. R., & Virgilio, N. (2020). One-step processing of highly viscous multiple Pickering emulsions. Journal of Colloid and Interface Science, 560, 536-545. Disponible

Salehi Morgani, M. (2020). Enhancing the Visual and Mechanical Properties of Multilayer Films Containing PCR [Mémoire de maîtrise, Polytechnique Montréal]. Disponible

Savadogo, O. (2020). Will the Future of Electric Vehicles be Powered by Accumulators or Hydrogen PEM Fuel Cells? Journal of New Materials for Electrochemical Systems, 23(4), 221-224. Lien externe

Schmid, J., Teichert, K., Chioua, M., Schindler, T., & Bortz, M. (2020). Industry-Driven Rapid Prototyping for Comparing Nonlinear Control Schemes in Pyomo. Chemie Ingenieur Tecknik, 92(12), 2016-2027. Lien externe

Schupbach, D., Comeau-Gauthier, M., Harvey, E., & Merle, G. (2020). Wnt modulation in bone healing. Bone, 138, 115491 (12 pages). Lien externe

Schwartz, L., Peres, S., Jolicoeur, M., & Moreira, J. V. (2020). Cancer and Alzheimer's disease: intracellular pH scales the metabolic disorders. Biogerontology, 21(6), 683-694. Lien externe

Shabanian, J., & Chaouki, J. (2020). Fluidized Beds for Gas–Solid Reactions. Dans Essentials of Fluidization Technology (363-404). Lien externe

Shu, S., El Bahraoui, N., Bertrand, F., & Chaouki, J. (2020). A bubble-induced turbulence model for gas-liquid bubbly flows in airlift columns, pipes and bubble columns. Chemical Engineering Science, 227, 14 pages. Lien externe

Singh, S., Gaikwad, K. K., & Lee, Y. S. (2020). Temperature-controlling system for fresh produce during distribution and transportation. Journal of Thermal Analysis and Calorimetry, 139(3), 1915-1923. Lien externe

Smith, A. L., Capelli, E., Konings, R. J. M., & Gheribi, A. E. (2020). Erratum to : "A new approach for coupledmodelling of the structural and thermo-physical properties of molten salts. Case of a polymeric liquid LiF-BeF2 (vol 299, 112165, 2020)". Journal of Molecular Liquids, 314, 113421 (1 page). Lien externe

Soleimani, I., Elahipanah, N., Shabanian, J., & Chaouki, J. (novembre 2020). Quantification of the magnitude of interparticle forces and its variation with temperature in a gas-solid fluidized bed [Communication écrite]. AIChE Annual Meeting. Lien externe

Soliman, O. Y., Alameh, M. G., De Crescenzo, G., Buschmann, M. D., & Lavertu, M. (2020). Efficiency of Chitosan/Hyaluronan-Based mRNA Delivery Systems In Vitro: Influence of Composition and Structure. Journal of Pharmaceutical Sciences, 109(4), 1581-1593. Lien externe

Song, Y. X. (2020). Integrated Cannabinoid Extraction-Purification Process by Nonionic Surfactant [Mémoire de maîtrise, Polytechnique Montréal]. Disponible

Spreutels, L., Héroux, M., & Legros, R. (2020). A spatial-and-scale-dependent model for predicting MSW generation, diversion and collection cost based on dwelling-type distribution. Detritus, 12, 3-11. Disponible

St-Charles, J.-C. (2020). Synthèse et réticulation de polymères énergétiques azoturés [Thèse de doctorat, Polytechnique Montréal]. Disponible

St-Charles, J.-C., & Dubois, C. (2020). Preparation of Azido Polycarbonates via Bulk Polymerization of Halogenated Diols. Propellants, Explosives, Pyrotechnics, 45(6), 889-897. Lien externe

St-Charles, J.-C., & Dubois, C. (2020). Thermal and Mechanical Properties of Triazole Cross-Linked Glycidyl Azide (GAP) and Azido Polycarbonate Networks. Propellants, Explosives, Pyrotechnics, 45(11), 1780-1789. Lien externe

Stucchi, M., Rigamonti, M. G., Carnevali, D., & Boffito, D. C. (2020). A Kinetic Study on the Degradation of Acetaminophen and Amoxicillin in Water by Ultrasound. Chemistryselect, 5(47), 14986-14992. Lien externe

Subramanian, A., George, B., Bobbara, S. R., Valitova, I., Ruggeri, I., Borghi, F., Podesta, A., Milani, P., Soavi, F., Santato, C., & Cicoira, F. (2020). Ion-gated transistors based on porous and compact TiO₂ films: Effect of Li ions in the gating medium. AIP Advances, 10(6), 7 pages. Lien externe

T

Tanguay-Rioux, F., Legros, R., & Spreutels, L. (2020). Particle size analysis of municipal solid waste for treatment process modeling. Waste Management and Research, 38(7), 783-791. Lien externe

Theiri, M., Chadjaa, H., Marinova, M., & Jolicoeur, M. (2020). Development of sequential and simultaneous bacterial cultures to hydrolyse and detoxify wood pre-hydrolysate for enhanced acetone-butanol-ethanol (ABE) production. Enzyme and Microbial Technology, 133, 11 pages. Lien externe

Torres Castillo, C. S., Bruel, C., & Tavares, J. R. (2020). Chemical affinity and dispersibility of boron nitride nanotubes. Nanoscale Advances, 2(6), 2497-2506. Lien externe

Tucny, J.-M. (2020). Modélisation des écoulements de gaz raréfiés au travers de filtres fibreux par la méthode de Boltzmann sur réseau [Thèse de doctorat, Polytechnique Montréal]. Disponible

Tucny, J.-M., Vidal, D., Drolet, F., & Bertrand, F. (2020). Impact of multilayering on the filtration performance of clean air filter media. Canadian Journal of Chemical Engineering, 98(12), 2632-2647. Lien externe

Tucny, J.-M., Vidal, D., Leclaire, S., & Bertrand, F. (2020). Comparison of existing and extended boundary conditions for the simulation of rarefied gas flows using the Lattice Boltzmann method. International Journal of Modern Physics C, 31(5), 2050070. Lien externe

V

Vaillancourt, K., Bahn, O., & El Maghraoui, N. (2020). History and recent state of TIMES optimization energy models and their applications for a transition towards clean energies. Dans Accelerating the transition to a 100% renewable energy era (Vol. 74, 113-130). Lien externe

Van Engeland, C., Haut, B., Spreutels, L., & Sobac, B. (2020). Evaporation versus imbibition in a porous medium. Journal of Colloid and Interface Science, 576, 280-290. Lien externe

Van Hoof, G., Schurmans, M., Robertz, B., Menard, J.-F., & Dessein, K. (2020). Moving Towards Sustainable Germanium Sourcing Evaluated by Means of Life Cycle Assessment. Journal of Sustainable Metallurgy, 6(2), 333-343. Lien externe

Viau, S., Majeau-Bettez, G., Spreutels, L., Legros, R., Margni, M., & Samson, R. (2020). Substitution modelling in life cycle assessment of municipal solid waste management. Waste Management, 102, 795-803. Disponible

Vieira, D., Angel, S., Honjol, Y., Gruenheid, S., Gbureck, U., Harvey, E., & Merle, G. (2020). Electroceutical silk-silver gel to eradicate bacterial infection. Advanced Biosystems, 4(4), 1900242. Lien externe

Vieira, D., McEachern, F., Filippelli, R., Dimentberg, E., Harvey, E. J., & Merle, G. (2020). Microelectrochemical smart needle for real time minimally invasive oximetry. Biosensors, 10(11), 157 (11 pages). Disponible

W

Walzberg, J., Dandres, T., Merveille, N., Cheriet, M., & Samson, R. (2020). Should we fear the rebound effect in smart homes? Renewable & Sustainable Energy Reviews, 125, 109798 (12 pages). Lien externe

X

Xiong, Q., Hong, K., Shu, S., Westmoreland, P., & Xiao, R. (2020). Multiscale numerical simulation of biomass thermochemical conversion: From micro to macro scales. Fuel Processing Technology, 199, 2 pages. Lien externe

Xiong, Q., Hong, K., Xu, F., Smith, J., & Chaouki, J. (2020). CFD simulation of biomass thermochemical conversion: Model development, practical application and experimental validation. Renewable Energy, 147, 2043-2045. Lien externe

Xu, Y., Li, T., Lu, L., Gao, X., Tebianian, S., Grace, J. R., Chaouki, J., Leadbeater, T. W., Jafari, R., Parker, D. J., Seville, J., & Ellis, N. (2020). Development and confirmation of a simple procedure to measure solids distribution in fluidized beds using tracer particles. Chemical Engineering Science, 217, 11 pages. Lien externe

Y

Yari, B., Beaulieu, C., Sauriol, P., Bertrand, F., & Chaouki, J. (2020). Size segregation of bidisperse granular mixtures in rotating drum. Powder Technology, 374, 172-184. Lien externe

Yazdanpanah, M. M., Chaouki, J., Van Wouwe, P., & Sels, B. (2020). Single step lactide production process with heat recovery. [Procédé de production de lactide en une étape avec récupération de chaleur]. (Brevet no US10851078). Lien externe

Yazdanpanah, M. M., Chaouki, J., Van Wouwe, P., & Sels, B. (2020). Single step lactide production process with hydrolysis of oligomers and catalyst by recovered water. [Procédé de production de lactide en une étape avec hydrolyse d'oligomères et de catalyseur par de l'eau récupérée]. (Brevet no US10562877). Lien externe

Yazdanpanah, M. M., Chaouki, J., Van Wouwe, P., & Sels, B. (2020). Single step lactide production process with recovering water by decantation. [Procédé de production de lactide en une étape avec récupération d'eau par décantation]. (Brevet no US10745374). Lien externe

Yazdanpanah, M., Chaouki, J., Van Wouwe, P., & Sels, B. (2020). Single step lactide production process with separate entry for solvent. (Demande de brevet no US10858333). Lien externe

Z

Zanoletti, M., Godard, F., & Perrier, M. (2020). Effect of support on the apparent activity of palladium oxide in catalytic methane combustion. Canadian Journal of Chemical Engineering, 98(10), 2205-2213. Lien externe

Zhang, H., Esquivel Guzman, J. A., Feng, X., Rivera, E., Lavertu, M., & Zhu, X. X. (2020). Protoporphyrin IX copolymer with poly(Ethylene glycol) methacrylate and its thermoresponsive properties. Canadian Journal of Chemistry, 98(9), 511-515. Lien externe

Zhang, Z., Vieira, D., Barralet, J. E., & Merle, G. (2020). 2D hematene, a bioresorbable electrocatalytic support for glucose oxidation. 2D Materials, 7(2), 025044 (6 pages). Lien externe

Zhang, Z., Zhang, Q., Jin, L., Zhang, Y., Cai, T., Zhao, L., Wang, J., Jin, Z., & Sheng, L. (2020). Experimental determination of the phase equilibrium in the MgCuCa ternary system at 350C. Journal of Alloys and Compounds, 818, 7 pages. Lien externe

Zorainy, M. Y., Nashaat, A., El-Shaer, Y., Naeem, I., Elzahed, O., & Gobara, M. (2020). Optimized silica-based hybrid coatings for the protection of aluminum against chloride-rich environment. Journal of Sol-Gel Science and Technology, 94(2), 257-269. Lien externe

Liste produite: Fri Apr 26 04:57:56 2024 EDT.