 | Monter d'un niveau |
Abbasi, S., Derdouri, A., & Carreau, P. (2014). Carbon nanotube conductive networks through the double percolation concept in polymer systems. International Polymer Processing, 29(1), 13-27. Lien externe
Abran, M., Cloutier, G., Cardinal, M.-H. R., Chayer, B., Tardif, J.-C., & Lesage, F. (2014). Development of a Photoacoustic, Ultrasound and Fluorescence Imaging Catheter for the Study of Atherosclerotic Plaque. IEEE Transactions on Biomedical Circuits and Systems, 8(5), 696-703. Lien externe
Achiche, S., Maier, A., Milanova, K., & Vadean, A. (novembre 2014). Visual, product evaluation: Using the semantic differential to investigate the influence of basic vase geometry on users' perception [Communication écrite]. ASME 2014 International Mechanical Engineering Congress & Exposition (IMECE 2014), Montréal, Québec (10 pages). Lien externe
Adouni, M. B. A. (2014). Analyse biomécanique de l'articulation de genou durant la bipédie humaine [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Adouni, M., & Shirazi-Adl, A. (2014). Evaluation of Knee Joint Muscle Forces and Tissue Stresses-Strains During Gait in Severe OA Versus Normal Subjects. Journal of Orthopaedic Research, 32(1), 69-78. Lien externe
Adouni, M., & Shirazi-Adl, A. (2014). Partitioning of knee joint internal forces in gait is dictated by the knee adduction angle and not by the knee adduction moment. Journal of Biomechanics, 47(7), 1696-1703. Lien externe
Adouni, M., Shirazi-Adl, A., & Marouane, H. (juillet 2014). Anterior cruciate ligament force markedly increases with gastrocnemius contraction : Analysis of the knee joint in gait and at different flexion angles [Communication écrite]. 7th World Congress of Biomechanics, Boston, Mass.. Non disponible
Adouni, M., Shirazi-Adl, A., & Marouane, H. (mars 2014). Gastrocnemius Contraction Substantially Increases ACL Force in Knee Joint in Gait and in all Flexion Angles [Communication écrite]. 60th Annual Meeting of the Orthopaedic Research Society, New Orleans, Louisiana. Lien externe
Ahmadfard, M., & Bernier, M. (juin 2014). An Alternative to ASHRAE's Design Length Equation for Sizing Borehole Heat Exchangers [Communication écrite]. ASHRAE 2014 Annual Conference, Seattle, WA. Publié dans ASHRAE Transactions, 120(2). Lien externe
Aissa, B., Hena-Zamal, H., Asgar-Khan, M., Haddad, E., Therriault, D., & Rosei, F. (octobre 2013). Fabrication of 3D micro-vascular network based carbon nanotube materials by the direct-write microfluidic infiltration approach for self healing applications [Communication écrite]. Materials Science and Technology Conference and Exhibition (MS and T 2013), Montréal, Québec. Non disponible
Alzahrani, M. M., Anam, E. A., Makhdom, A. M., Villemure, I., & Hamdy, R. C. (2014). The effect of altering the mechanical loading environment on the expression of bone regenerating molecules in cases of distraction osteogenesis. Frontiers in Endocrinology, 5, 214. Disponible
Ammar, S., & Trépanier, J.-Y. (novembre 2014). Conceptual design of a 200 passengers Blended Wing Body aircraft [Communication écrite]. ASME International Mechanical Engineering Congress & Exposition (IMECE 2014), Montréal, Québec. Lien externe
Arabi, S., Camarero, R., & Guibault, F. (2014). Unstructured meshes for large body motion using mapping operators. Mathematics and Computers in Simulation, 106, 26-43. Lien externe
Aramesh, M., Shaban, Y., Balazinski, M., Attia, H., Kishawy, H. A., & Yacout, S. (juin 2014). Survival life analysis of the cutting tools during turning titanium metal matrix composites (Ti-MMCs) [Communication écrite]. 6th CIRP Conference on Performance Cutting (HPC 2014), Berkeley, Cal.. Publié dans Procedia CIRP, 14. Lien externe
Aramesh, M., Shaban, Y., Balazinski, M., Attia, M. H., & Kishawy, H. A. (mai 2014). Tool life prediction via survival life analysis of the cutting inserts during turning titanium metal matrix composites (TI-MMCs) [Communication écrite]. 3rd International Conference on Virtual Machining Process Technology (VMPT 2014), University of Calgary, Calgary, Alberta. Non disponible
Arguin, M. (2014). Contrôle de l'alignement des nanotubes de carbone multiparois à l'intérieur d'un polymère et d'un matériau composite multi-échelles à l'aide d'un champ électrique [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Arjmand, N., Hajihosseinali, M., Shirazi-Adl, A., & Plamondon, A. (juillet 2014). Effect of Body Weight on Spine Loads in Different Activities: A Detailed Biomechanical Modeling Investigation [Communication écrite]. 7th World Congress of Biomechanics, Boston, Mass.. Non disponible
Arjmand, N., Rajaee, M. A., Shirazi-Adl, A., & Plamondon, A. (juillet 2014). Comparison of Five Lifting Analysis Tools to Determine Low Back Loads [Communication écrite]. 7th World Congress of Biomechanics, Boston, Mass.. Non disponible
Asadishad, B. (2014). Effect of Load on Machine Geometry with Respect to the Weight and Torque [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Ashrafi, F. (2014). Delay of Rotating Stall in Compressors Using Plasma Actuation [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Aubin, C.-É., Parent, S., & Driscoll, M. (2014). Surgical devices for the correction of spinal deformities. (Brevet no US8870929). Lien externe
Aubin, C.-É., Parent, S., Villemure, I., Amini, S., Driscoll, M., & Moldovan, F. (2014). Cyclic controlled dynamic device for the correction of spinal deformities. (Demande de brevet no WO2014127464). Lien externe
Azizian, R., & Mureithi, N. W. (2014). Numerical analysis of fretting-wear with a hybrid elastoplastic friction model. Journal of Pressure Vessel Technology, 136(3). Lien externe
Azizian, R., & Mureithi, N. W. (2014). A simple empirical model for tube-support normal impact interaction. Journal of Pressure Vessel Technology, 136(5). Lien externe
Beauchemin, P.-F. (2014). Développement d'une méthode d'élastographie par résonance magnétique pour l'évaluation du disque intervertébral [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Beausoleil-Morrison, I., Macdonald, F., Kummert, M., McDowell, T., & Jost, R. (2014). Co-simulation between ESP-r and TRNSYS. Journal of Building Performance Simulation, 7(2), 133-151. Lien externe
Béguin, C., Pelletier, É., & Étienne, S. (juillet 2014). Void fraction effect on added mass in bubbly flow [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2014), Anaheim, CA, United states. Lien externe
Béguin, C., Plagnard, T., & Étienne, S. (juillet 2014). Wall proximity and curvature effect on added mass forces in two-phase cross-flow [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2014), Anaheim, CA, United states (8 pages). Lien externe
Behrang, A. (2014). Modeling of Heat Conduction in Hybrid Nanodispersions [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Belzile, B., & Birglen, L. (2014). A compliant self-adaptive gripper with proprioceptive haptic feedback. Autonomous Robots, 36(1-2), 79-91. Lien externe
Belzile, B., & Birglen, L. (mai 2014). Stiffness analysis of double tendon underactuated fingers [Communication écrite]. IEEE International Conference on Robotics and Automation (ICRA 2014), Hong Kong, China. Lien externe
Benoît, A., Aubin, P., Aubin, C.-É., & Villemure, I. (octobre 2014). Histomorphometry of the newly formed bone after its growth modulation by static and dynamic compression using a rat tail model [Communication écrite]. 44e réunion de la Société de scoliose du Québec (SSQ), Québec City, Canada. Non disponible
Benoit, A., Rémy, L., Köster, A., Maitournam, H., & Oger, F. (2014). Experimental investigation of the behavior and the low cycle fatigue life of a welded structure. Materials Science and Engineering A, 595, 64-76. Lien externe
Bernier, M. (mai 2014). Sizing and simulating bore fields using thermal response factors [Communication écrite]. 11th IEA Heat Pump Conference, Montréal, Québec. Non disponible
Bernier, M., & Cauret, O. (mai 2014). Modeling of short geothermal boreholes in series with experimental validation [Communication écrite]. 11th IEA Heat Pump Conference, Montréal, Québec. Non disponible
Bianco, R.-J., Arnoux, P.-J., Mac-Thiong, J.-M., Wagnac, E., & Aubin, C.-É. (octobre 2014). Biomechanical analysis of trajectories, sizes and pedicles screw types to minimize pullout risks [Communication écrite]. 44e réunion de la Société de scoliose du Québec (SSQ), Québec City, Canada. Non disponible
Bianco, R.-J., Arnoux, P.-J., Wagnac, E., Mac-Thiong, J.-M., & Aubin, C.-É. (2014). Minimizing Pedicle Screw Pullout Risks: A Detailed Biomechanical Analysis of Screw Design and Placement. Clinical Spine Surgery, 30(3), E226-E232. Lien externe
Birglen, L. (2014). Self-adaptive mechanical finger and method. (Brevet no US8720964). Lien externe
Birglen, L., & Ruella, C. (2014). Analysis and optimization of one-degree of freedom robotic legs. Journal of Mechanisms and Robotics, 6(4), 041004-041004. Lien externe
Bodkhe, S., Gosselin, F., & Therriault, D. (novembre 2014). Three-dimensional structures with polyvinylidene fluoride [Communication écrite]. ASME 2014 International Mechanical Engineering Congress and Exposition, Montréal, Québec. Non disponible
Bodkhe, S., Rajesh, P.S.M., Kamle, S., & Verma, V. (2014). Beta-phase enhancement in polyvinylidene fluoride through filler addition: Comparing cellulose with carbon nanotubes and clay. Journal of Polymer Research, 21(5), 11 pages. Lien externe
Boyer, L., Shen, J., Parent, S., Kadoury, S., & Aubin, C.-É. (mai 2014). Variabilté de méthodes de mesures de la rotation axiale vertébrale pour l'évaluation des déformations scoliotiques [Communication écrite]. 34e Journée de la recherche du POES de la Division d'orthopédie de l'Université de Montréal, Montréal, Québec. Non disponible
Boyer, L., Wang, X., Parent, S., & Aubin, C.-É. (octobre 2014). Analyse biomécanique de techniques chirurgicales de dérotation "en bloc" pour la correction 3D de la scoliose [Biomechanical analysis of surgical "en bloc" derotation techniques for 3D correction of scoliosis]. [Communication écrite]. 44e réunion de la Société de scoliose du Québec (SSQ), Québec City, Canada. Non disponible
Bruna-Rosso, C. (2014). Étude biomécanique par éléments finis de dispositifs d'arthrodèse de la jonction sacro-iliaque [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Bruna-Rosso, C., Aubin, C.-É., Rohan-Jean, B., Godiot-Raboulet, Y., & Arnoux, P.-J. (mai 2014). Évaluation biomécanique de dispositifs d'arthrodèse de la jonction sacro-iliaque : résultats préliminaires [Communication écrite]. 34e Journée de la recherche du POES de la Division d'Orthopédie de l'Université de Montréal, Montréal, Québec. Non disponible
Cammarata, M., Aubin, C.-É., Wang, X., & Mac-Thiong, J.-M. (2014). Biomechanical risk factors for proximal junctional kyphosis : a detailed numerical analysis of surgical instrumentation. Spine, 39(8), E500-507. Lien externe
Caouette, C., Rauch, F., Villemure, I., Arnoux, P. J., Gdalevitch, M., Veilleux, L. N., Heng, J. L., & Aubin, C.-É. (2014). Biomechanical analysis of fracture risk associated with tibia deformity in children with osteogenesis imperfecta: a finite element analysis. Journal of Musculoskeletal & Neuronal Interactions, 14(2), 205-212. Lien externe
Caouette, C., Rauch, F., Villemure, I., Arnoux, P.-J., & Aubin, C.-É. (mai 2014). Analyse biomécanique par éléments finis des risques fracture associés aux difformités du tibia chez les enfants atteints d'ostéogenèse imparfaite [Communication écrite]. 34e Journée de la recherche du POES de la Division d'Orthopédie de l'Université de Montréal, Montréal, Québec. Non disponible
Cauchy, X., Sapieha, J.-E., & Therriault, D. (septembre 2014). Highly conductive heterogeneous epoxy-Silver composites by phase selective in-Situ filler synthesis [Communication écrite]. 29th Annual Technical Conference of the American Society for Composites (ASC 2014); 16th US-Japan Conference on Composite Materials; ASTM-D30 Meeting, La Jolla, San Diego, CA, United states. Lien externe
Cauchy, X., Sapieha, J.-E., & Therriault, D. (octobre 2014). In-situ formation of conduction networks in highly conductive heterogeneous epoxy-silver composites [Communication écrite]. Composites and Advanced Materials Expo (CAMX 2014), Orlando, Florida. Non disponible
Chaix, J. (2014). Influence de la température de revenu sur la résistance du CA6NM à la propagation des fissures de fatigue [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Charreton, C. (2014). Paramètres pour l'instabilité fluidélastique : dérivées de stabilité et amortissement diphasique [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Charreton, C., Béguin, C., Ross, A., Étienne, S., & Pettigrew, M. J. (juillet 2014). Two-phase damping in vertical pipe flows: Effect of void fraction, flow rate and external excitation [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2014), Anaheim, CA, United states. Lien externe
Chizari, K., & Therriault, D. (novembre 2014). Conductive filaments from CNTs/PLA composites [Affiche]. ASME International Mechanical Engineering Congress & Exposition, Montréal, Québec. Non disponible
Chizari, K., & Therriault, D. (août 2014). Fabrication of Conductive Microfilaments and Liquid Sensor from CNTs/PLA Nanocomposites [Communication écrite]. 10th Joint Canada-Japan Workshop on Composites, Vancouver, Canada. Lien externe
Cimmino, M. (2014). Développement et validation expérimentale de facteurs de réponse thermique pour champs de puits géothermiques [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Cimmino, M., & Bernier, M. (juin 2014). Effects of unequal borehole spacing on the required borehole length [Communication écrite]. 2014 ASHRAE Annual Conference, Seattle, WA, USA. Publié dans ASHRAE Transactions, 120(2). Lien externe
Cimmino, M., & Bernier, M. (2014). A semi-analytical method to generate g-functions for geothermal bore fields. International Journal of Heat and Mass Transfer, 70, 641-650. Lien externe
Clerc, T., Hébert, A., Leroyer, H., Argaud, J. P., Bouriquet, B., & Ponçot, A. (2014). An Advanced Computational Scheme for the Optimization of 2D Radial Reflector Calculations in Pressurized Water Reactors. Nuclear Engineering and Design, 273, 560-575. Lien externe
Clin, J., Cobetto, N., Desbien-Blais, F., Le May, S., Labelle, H., Parent, S., & Aubin, C.-É. (mai 2014). Advanced brace design combining CAD/CAM and biomechanical simulation for the treatment of adolescent idiopathic scoliosis [Communication écrite]. REHA-TECHNIK Congress, Leipzig, Germany. Non disponible
Cobetto, N., Aubin, C.-É., & Clin, J. (octobre 2014). Surgical planning for the 3D correction of progressive juvenile scoliosis using fusionless devices : results for the first 3 cases [Communication écrite]. 44e réunion de la Société de scoliose du Québec (SSQ), Québec City, Canada. Non disponible
Cobetto, N., Aubin, C.-É., Clin, J., Le May, S., Desbiens-Blais, F., Labelle, H., & Parent, S. (2014). Braces optimized with computer-assisted design and simulations are lighter, more comfortable, and more efficient than plaster-cast braces for the treatment of adolescent idiopathic scoliosis. Spine Deformity, 2(4), 276-284. Disponible
Corbeil-Létourneau, S. (2014). Étude numérique de l'effet de l'élancement et de la garde au sol sur le galop d'un corps rigide cylindrique à section carrée [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Corbeil-Letourneau, S., Étienne, S., Hay, A., & Pelletier, D. (janvier 2014). A numerical study of the influence of aspect ratio and gap on 3D galloping of square prisms [Communication écrite]. 52nd AIAA Aerospace Sciences Meeting - AIAA Science and Technology Forum and Exposition (SciTech 2014), National Harbor, Maryland. Lien externe
Crochon, T. (2014). Modeling in the Viscoelastic Behavior of Polyimide Matrix at Elevated Temperature [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Crochon, T., & Lévesque, M. (mai 2014). Time-temperature behaviour of MVK-10 matrix [Communication écrite]. 9th International Conference on Mechanics of Time-Dependent Materials, Montréal, Québec. Non disponible
Dal Maso, F., Raison, M., Lundberg, A., Arndt, A., & Begon, M. (2014). Coupling between 3D displacements and rotations at the glenohumeral joint during dynamic tasks in healthy participants. Clinical Biomechanics, 29(9), 1048-1055. Lien externe
Daneshmand, F., Adamowski, J., & Liaghat, T. (2014). Bottom outlet dam flow: Physical and numerical modelling. Proceedings of the Institution of Civil Engineers: Water Management, 167(3), 176-184. Lien externe
Davydov, V., Rakhmanina, A., Kireev, I., Alieva, I., Zhironkina, O., Strelkova, O., Dianova, V., Samani, T. D., Mireles, K., Yahia, L., Uzbekov, R., Agafonov, V., & Khabashesku, V. (2014). Solid state synthesis of carbon-encapsulated iron carbide nanoparticles and their interaction with living cells. Journal of Materials Chemistry B, 2(27), 4250-4261. Lien externe
Delcroix, B., Kummert, M., Daoud, A., & Bouchard, J. (mai 2014). Experimental assessment of a phase change material in walls for heating and cooling applications [Communication écrite]. 8th Conference of IBPSA-Canada (eSim 2014), Ottawa, ON, CAN. Lien externe
Delisle, V., & Kummert, M. (2014). A novel approach to compare building-integrated photovoltaics/thermal air collectors to side-by-side PV modules and solar thermal collectors. Solar Energy, 100, 50-65. Lien externe
Delorme, R. (2014). Étude de faisabilité de l'insertion d'une membrane élastomère à renfort textile dans l'aspirateur d'une centrale hydroélectrique [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Deloze, T., & Laurendeau, É. (janvier 2014). NSMB contribution to the 2nd High Lift Prediction Workshop [Communication écrite]. 52nd AIAA Aerospace Sciences Meeting (SciTech 2014), National Harbor, Maryland. Lien externe
Dermanaki-Farahani, R., Laberge Lebel, L., & Therriault, D. (2014). Manufacturing of three-dimensionally microstructured nanocomposites through microfluidic infiltration. Journal of Visualized Experiments (85). Lien externe
Desrochers-Perrault, F., Aubin, C.-É., Wang, X., & Schwend, R. M. (2014). Biomechanical analysis of Iliac screw fixation in spinal deformity instrumentation. Clinical Biomechanics, 29(6), 614-621. Lien externe
Doumit, N. (2014). Étude d'intégration fonctionnelle du cycle de développement des produits et des communautés de pratique virtuelles [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Dreischarf, M., Zander, T., Shirazi-Adl, A., Puttlitz, C. M., Adam, C. J., Chen, C. S., Goel, V. K., Kiapour, A., Kim, Y. H., Labus, K. M., Little, J. P., Park, W. M., Wang, Y. H., Wilke, H. J., Rohlmann, A., & Schmidt, H. (juillet 2014). Comparison of eight published lumbar spine finite element models [Communication écrite]. 7th World Congress of Biomechanics, Boston, Mass.. Non disponible
Dreischarf, M., Zander, T., Shirazi-Adl, A., Puttlitz, C. M., Adam, C. J., Chen, C. S., Goel, V. K., Kiapour, A., Kim, Y. H., Labus, K. M., Little, J. P., Park, W. M., Wang, Y. H., Wilke, H. J., Rohlmann, A., & Schmidt, H. (2014). Comparison of eight published static finite element models of the intact lumbar spine: Predictive power of models improves when combined together. Journal of Biomechanics, 47(8), 1757-1766. Lien externe
Dugré, A. (2014). A Design Process Using Topology Optimization Applied to Flat Pressurized Stiffened Panels [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Dupuis, S., Fortin, C., Aubin, C.-É., Wentzy, P., & Boronat, L. (octobre 2014). Comparative biomechanical analysis of braces for scoliosis treatment [Communication écrite]. 44e réunion de la Société de scoliose du Québec (SSQ), Québec City, Canada. Non disponible
Durango, S., Restrepo, D., Ruiz, O., Restrepo-Giraldo, J., & Achiche, S. (mai 2014). Symmetrical observability of kinematic parameters in symmetrical-parallel mechanisms [Communication écrite]. 10th World Congress on Computational Mechanics. Publié dans Blucher Mechanical Engineering Proceedings, 1(1). Lien externe
El Mourid, A. (2014). Mechanical Behavior of a Triaxially Braided Textile Composite at High Temperature [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
El Ouaaid, Z. (2014). L'effet des charges externes sur la biomécanique et la stabilité de la colonne vertébrale en posture debout [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
El Ouaaid, Z., Shirazi-Adl, A., & Plamondon, A. (2014). Effect of changes in orientation and position of external loads on trunk muscle activity and kinematics in upright standing. Journal of Electromyography and Kinesiology, 24(3), 387-393. Lien externe
El Ouaaid, Z., Shirazi-Adl, A., Plamondon, A., & Arjmand, N. (2014). Elevation and orientation of external loads influence trunk neuromuscular response and spinal forces despite identical moments at the L5-S1 level. Journal of Biomechanics, 47(12), 3035-3042. Lien externe
El Ouaaid, Z., Shirazi-Adl, A., Plamondon, A., & Arjmand, N. (juillet 2014). Trunk Muscle Activity and Spinal Loads Substantially Alter with External Load Orientation and Position despite Identical Moment [Communication écrite]. 7th World Congress of Biomechanics, Boston, Mass.. Non disponible
El-Mourid, A., Ganesan, R., & Lévesque, M. (mai 2014). Ageing influence on the failure of textile composites at elevated temperatures [Présentation]. Dans 9th International Conference on Mechanics of Time-Dependent Materials, Montréal, Québec. Non disponible
Eslami Nejad, P., Bernier, M., & Cauret, O. (juin 2014). Evaluation of the thermal performance of two non- standard borehole configurations [Communication écrite]. 2014 ASHRAE Annual Conference, Seattle, WA, USA. Publié dans ASHRAE Transactions, 120(2). Lien externe
Falsafioon, M., Arabi, S., Camarero, R., & Guibault, F. (septembre 2014). Comparison of two mesh smoothing techniques for unstructured grids [Communication écrite]. 27th IAHR Symposium on Hydraulic Machinery and Systems (IAHR 2014), Montréal, Québec (10 pages). Lien externe
Fanciulli, C., Codecasa, M., Passaretti, F., & Vasilevskiy, D. (juin 2013). Effects of metal particles decoration on n-type chalcogenides processed by open die pressing [Communication écrite]. International Conference on Thermoelectrics 2013, Kobe, Japan. Publié dans Journal of Electronic Materials, 43(6). Lien externe
Farahani, R. D., Chizari, K., & Therriault, D. (2014). Three-dimensional printing of freeform helical microstructures: a review. Nanoscale, 6(18), 10470-10485. Disponible
Farahani, R. D., Laberge Lebel, L., & Therriault, D. (2014). Processing parameters investigation for the fabrication of self-supported and freeform polymeric microstructures using ultraviolet-assisted three-dimensional printing. Journal of Micromechanics and Microengineering, 24(5), 055020 (12 pages). Disponible
Fotsing, E. R., Ross, A., & Ruiz, E. (2014). Characterization of surface defects on composite sandwich materials based on deflectrometry. NDT & E International, 62, 29-39. Lien externe
Fotsing, E. R., Sola, M., Ross, A., & Ruiz, E. (2014). Dynamic characterization of viscoelastic materials used in composite structures. Journal of Composite Materials, 48(30), 3815-3825. Lien externe
Fradet, L., Petit, Y., Wagnac, E., Aubin, C.-É., & Arnoux, P.-J. (2014). Biomechanics of thoracolumbar junction vertebral fractures from various kinematic conditions. Medical and Biological Engineering and Computing, 52(1), 87-94. Lien externe
Franca, R., Samani, T. D., Bayade, G., Yahia, L., & Sacher, E. (2014). Nanoscale surface characterization of biphasic calcium phosphate, with comparisons to calcium hydroxyapatite and -tricalcium phosphate bioceramics. Journal of Colloid and Interface Science, 420, 182-188. Lien externe
Gagné, M., & Therriault, D. (2014). Lightning strike protection of composites. Progress in Aerospace Sciences, 64, 1-16. Lien externe
Galbusera, F., Bashkuev, M., Wilke, H.-J., Shirazi-Adl, A., & Schmidt, H. (2014). Comparison of various contact algorithms for poroelastic tissues. Computer Methods in Biomechanics and Biomedical Engineering, 17(12), 1323-1334. Lien externe
Gallay, S., Ghasemi, S., & Laurendeau, É. (janvier 2014). Sweep effects on non-linear lifting line theory near stall [Communication écrite]. 52nd AIAA Aerospace Sciences Meeting (SciTech 2014), National Harbor, Maryland. Lien externe
Gallet, P. (2014). Développement d'un module de thermohydraulique simplifiée dans le code Donjon4 pour l'étude multiphysique des réacteurs à eau pressurisée [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Galván, S., Reggio, M., & Guibault, F. (2014). Assessment Study of K-ɛ Turbulence Models and Near-Wall Modeling for Steady State Swirling Flow Analysis in Draft Tube UsingFluent. Engineering Applications of Computational Fluid Mechanics, 5(4), 459-478. Lien externe
Gao, Y., Étienne, S., Wang, X., & Tan, S. K. (2014). Experimental Study on the Flow Around Two Tandem Cylinders with Unequal Diameters. Journal of Ocean University of China, 13(5), 761-770. Lien externe
Gariépy, A., Miao, H. Y., & Lévesque, M. (2014). Peen forming. Dans Hashmi, S. (édit.), Comprehensive Materials Processing. Volume 3, Advanced Forming Technologies (p. 295-329). Lien externe
Garon, A., & Delfour, M. C. (2014). Three-dimensional quadratic model of paclitaxel release from biodegradable polymer films. SIAM Journal on Applied Mathematics, 74(5), 1354-1374. Lien externe
Gaudet, G., Begon, M., Achiche, S., Dal Maso, F., Musy, G., & Raison, M. (juin 2014). Muscle overactuation problem : two solutions from an undeterminate to a deterministic problem [Communication écrite]. 3rd International Multibody System Dynamics Conference (IMSD 2014), Busan, Korea. Non disponible
Gaudet, G., Raison, M., Achiche, S., Dal Maso, F., Musy, G., & Begon, M. (juillet 2014). Solutions to the muscle redundancy problem : from an undeterminate to a deterministic problem [Communication écrite]. 11th World congress on computational mechanics (WCCM 2014), Barcelona, Spain. Non disponible
Geoffroy, P., Bordron, O., Mansard, N., Raison, M., Stasse, O., & Bretl, T. (juin 2014). A two-stage suboptimal approximation for variable compliance and torque control [Communication écrite]. 13th European Control Conference, ECC 2014, Strasbourg, France. Lien externe
Geoffroy, P., Mansard, N., Raison, M., Achiche, S., & Todorov, E. (2014). From inverse kinematics to optimal control, accepted to the advances in robot kinematics. Dans Advances in Robot Kinematics (p. 409-418). Lien externe
Geronymos, S. (2014). Modélisation vibratoire en flexion de poutres composites multicouches à section creuse suite à un impact [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Gervais, J., Périé-Curnier, D., & Aubin, C.-É. (2014). Sensitivity of MRI signal distribution within the intervertebral disc to image segmentation and data normalization. Computer Methods in Biomechanics and Biomedical Engineering, 17(12), 1383-1390. Lien externe
Ghasemi, S., Mosahebi, A., & Laurendeau, É. (janvier 2014). A two-dimensional/infinite swept wing navier-stokes solver [Communication écrite]. 52nd AIAA Aerospace Sciences Meeting (SciTech 2014), National Harbor, Maryland. Lien externe
Ghossein, E. (2014). Numerical Validation of Analytical Homogenization Models for the Case of Randomly Distributed and Oriented Ellipsoidal Fibers Reinforced Composites [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Ghossein, E., & Lévesque, M. (2014). A comprehensive validation of analytical homogenization models: The case of ellipsoidal particles reinforced composites. Mechanics of Materials, 75, 135-150. Lien externe
Givi, M., & Mayer, J. R. R. (2014). Validation of volumetric error compensation for a five-axis machine using surface mismatch producing tests and on-machine touch probing. International Journal of Machine Tools and Manufacture, 87, 89-95. Lien externe
Godefroy, V. (2014). Élaboration et validation d'une suite évolutive de modèles d'échangeurs géothermiques verticaux [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Godefroy, V., & Bernier, M. (mai 2014). A simple model to account for thermal capacity in boreholes [Communication écrite]. 11th IEA Heat Pump Conference, Montréal, Québec. Non disponible
Gordon, S., Boukhili, R., & Merah, N. (2014). Impact behavior and finite element prediction of the compression after impact strength of foam/vinylester-glass composite sandwiches. Journal of Sandwich Structures and Materials, 16(5), 551-574. Lien externe
Gosselin, F., & Neetzow, P. (mars 2014). Propulsion at low Reynolds number via beam extrusion [Communication écrite]. APS March Meeting 2014, Denver, Colorado. Publié dans Bulletin of the American Physical Society, 59. Non disponible
Gosselin, F., & Paidoussis, M. P. (2014). Dynamical stability analysis of a hose to the sky. Journal of Fluids and Structures, 44, 226-234. Lien externe
Gosselin, F., Neetzow, P., & Paak, M. (2014). Buckling of a beam extruded into highly viscous fluid. Physical Review E - Statistical, Nonlinear, and Soft Matter Physics, 90(5). Lien externe
Grenier, R., Périé-Curnier, D., Gilbert, G., Beaudoin, G., & Curnier, D. (2014). Assessment of mechanical properties of muscles from multi-parametric magnetic resonance imaging. Journal of Biomedical Science and Engineering, 7(8), 593-603. Disponible
Guérin, N., Lévesque, M., & Therriault, D. (2014). Helical dielectrophoretic particle separator fabricated by conformal spindle printing. Journal of Biomedical Science and Engineering, 7(9), 641-650. Disponible
Guiassa, R., Mayer, J. R. R., Balazinski, M., Engin, S., & Delorme, F.-E. (2014). Closed door machining error compensation of complex surfaces using the cutting compliance coefficient and on-machine measurement for a milling process. International Journal of Computer Integrated Manufacturing, 27(11), 1022-1030. Lien externe
Guo, S. (2014). Solvent-Cast Three-Dimensional Printing of Polylactide Multifunctional Microsystems [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Guo, S., Heuzey, M.-C., & Therriault, D. (2014). Properties of polylactide inks for solvent-cast printing of three-dimensional freeform microstructures. Langmuir, 30(4), 1142-1150. Disponible
Hached, S., Loutochin, O., Corcos, J., Garon, A., & Sawan, M. (2014). Novel, remotely controlled, artificial urinary sphincter: A retro-compatible device. IEEE/ASME Transactions on Mechatronics, 19(4), 1352-1362. Lien externe
Hachem, B., Parent, S., & Aubin, C.-É. (octobre 2014). Fusionless spinal deformity induction and correction using a porcine spine finite element model [Communication écrite]. 44e réunion de la Société de scoliose du Québec (SSQ), Québec City, Canada. Non disponible
Hadji, A., & Mureithi, N. W. (juillet 2014). Nonlinear normal modes and the Dahl friction model parameter identification [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2014), Anaheim, CA, United states. Lien externe
Hadji, A., & Mureithi, N. W. (novembre 2014). Nonlinear normal modes and the LuGre friction model parameter identification [Communication écrite]. ASME International Mechanical Engineering Congress & Exposition (IMECE 2014), Montréal, Québec. Lien externe
Haering, D., Raison, M., & Begon, M. (2014). Measurement and description of three-dimensional shoulder range of motion with degrees of freedom interactions. Journal of Biomechanical Engineering, 136(8). Lien externe
Haering, D., Raison, M., Arndt, A., & Begon, M. (2014). Kinematic model and elbow flexion interaction on shoulder range of motion. Computer Methods in Biomechanics and Biomedical Engineering, 17(SUPP1), 84-85. Lien externe
Hajihosseinali, M., Arjmand, N., Shirazi-Adl, A., Farahmand, F., & Ghiasi, M. S. (2014). A novel stability and kinematics-driven trunk biomechanical model to estimate muscle and spinal forces. Medical Engineering and Physics, 36(10), 1296-1304. Lien externe
Hammoud, R., Boukhili, R., & Yahia, A. (2014). Chemoplastic modelling for concrete at high temperature. Journal of Structural Fire Engineering, 5(2), 135-146. Lien externe
Hammoud, R., Yahia, A., & Boukhili, R. (2014). Triaxial compressive strength of concrete subjected to high temperatures. Journal of Materials in Civil Engineering, 26(4), 705-712. Lien externe
Hart, R., Ballaz, L., Robert, M., Pouliot, A., D'Arcy, S., Raison, M., & Lemay, M. (2014). Impact of Exercise-Induced Fatigue on the Strength, Postural Control, and Gait of Children with a Neuromuscular Disease. American Journal of Physical Medicine & Rehabilitation, 93(8), 649-655. Lien externe
Hay, A., Étienne, S., & Pelletier, D. (juin 2014). Time-integration for incompressible viscous flows: Stepsize and order selection based on the BDF [Communication écrite]. 32nd AIAA Applied Aerodynamics Conference 2014, Atlanta, Georgia, USA (16 pages). Lien externe
Hay, A., Étienne, S., Pelletier, D., & Garon, A. (janvier 2014). High-order temporal accuracy for 3D finite-element ALE flow simulations [Communication écrite]. AIAA Science and Technology Forum and Exposition 2014 (SCITECH 2014), National Harbor, MD. Lien externe
Hay, A., Étienne, S., Pelletier, D., & Garon, A. (juin 2014). High-order time-integration of 3D moving grid flow problems using an ALE/FE formulation [Communication écrite]. 22nd Annual Conference of the CFD Society of Canada, Toronto, Ontario. Non disponible
Hay, A., Yu, K. R., Étienne, S., Garon, A., & Pelletier, D. (2014). High-order temporal accuracy for 3D finite-element ALE flow simulations. Computers and Fluids, 100, 204-217. Lien externe
Hébert, A. (mai 2014). DRAGON5 and DONJON5, the contribution of École Polytechnique de Montréal to the SALOME platform [Communication écrite]. 3rd International Conference on Physics and Technology of Reactors and Applications (PHYTRA3), Tetouan City, Morocco. Non disponible
Hébert, A. (2014). Representation of the Temperature Correlation Effect in Lattice Calculations. Review of Applied Physics, 3, 18-24. Non disponible
Hébert, A. (septembre 2014). Revisiting the Clio perturbative approach for analyzing systems in fundamental mode conditions [Communication écrite]. International Conference on the Role of Reactor Physics toward a Sustainable Future (PHYSOR 2014), Kyoto, Japan. Non disponible
Hébert, A., & Leroyer, H. (2014). A presentation of the OPTEX reflector model. Nuclear Science and Engineering, 176(3), 312-324. Lien externe
Henao, J., Labelle, H., Arnoux, P.-J., & Aubin, C.-É. (octobre 2014). Biomechanical impact of scoliosis correction manoeuvers on the spinal cord and spinal nerves [Communication écrite]. 44e réunion de la Société de scoliose du Québec (SSQ), Québec City, Canada. Non disponible
Hernandez, S., Raison, M., Torres, A., Gaudet, G., & Achiche, S. (septembre 2014). From on-body sensors to in-body data for health monitoring and medical robotics : a survey [Communication écrite]. Global Information Infrastructure and Networking Symposium (GIS 2014), Montréal, Québec (5 pages). Lien externe
Iliescu, L. E., Lakis, A. A., & Abou-Antoun, A. (2014). Hypervelocity impact (HVI) tests & signal recordings. Universal Journal of Aeronautical & Aerospace Sciences, 2, 80-113. Lien externe
Imani Jajarmi, R., & Robert, É. (2014). Characterization of the mean force on sub-micron particles in a standing wave field. Bulletin of the American Physical Society, 59. Non disponible
Jai, O., Bouhazma, O. E. H., Belala, A., & Hébert, A. (mai 2014). Validation of codes DRAGON4 and DONJON4 by calculating the effective multiplication factor of a SLOWPOKE-2 reactor [Communication écrite]. 3rd International Conference on Physics and Technology of Reactors and Applications (PHYTRA3), Tetouan City, Morocco. Non disponible
Jamin, T., Dubé, M., & Laberge Lebel, L. (juin 2014). Stamp forming of thermoplastic composites: Effect of radius and thickness on part quality [Communication écrite]. 16th European Conference on Composites Materials (ECCM16), Seville, Spain (8 pages). Lien externe
Jamin, T., Dubé, M., Kaganj, A. B., Hojjati, M., Hoa, S. V., Nguyen, H.-D., Pham, T., Laberge Lebel, L., & Héroux, S. (avril 2014). Thermoformage des composites thermoplastiques, Projet Comp-512 [Communication écrite]. Forum - Consortium de recherche et d'innovation en aérospatiale au Québec (CRIAQ), Montréal, Québec. Non disponible
Joncas, J., Beausejour, M., Moreau, A., Larouche, G., Mac-Thiong, J.-M., & Aubin, C.-É. (octobre 2014). Relations entre la classification des groupes d'endophénotype (BE) et le résultat au traitement par corset souple chez les patients atteints de scoliose idiopathique de l'adolescent (SIA) [Communication écrite]. 44e réunion de la Société de scoliose du Québec (SSQ), Québec City, Canada. Non disponible
Kaganj, A. B., Laberge Lebel, L., Hojjati, M., & Hoa, S. V. (août 2014). Stamp forming of S-shape thermoplastic composites [Communication écrite]. 10th Joint Canada-Japan Workshop on Composites, Vancouver, Canada (8 pages). Lien externe
Keivanpour, S., Ait-Kadi, D., & Mascle, C. (janvier 2014). Auto manufacturers and applying green practices in the presence of rivals : the case of EIV [Communication écrite]. International Conference on Industrial Engineering and Operations Management (IEOM 2014), Bali, Indonesia (8 pages). Lien externe
Keivanpour, S., Ait-Kadi, D., & Mascle, C. (juin 2014). End of life aircrafts recovery and green supply chain : opportunities and challenges [Communication écrite]. International Conference on Green Supply Chain (GSC 2014), Arras, France (10 pages). Non disponible
Keivanpour, S., Ait-Kadi, D., & Mascle, C. (janvier 2014). Sustainable approach to aircraft maintenance at design stage [Communication écrite]. Annual Reliability and Maintainability Symposium (RAMS 2014), Colorado Springs, CO, USA. Non disponible
Keivanpour, S., Mascle, C., & Ait Kadi, D. (septembre 2014). A conceptual framework for value chain analysis of aircraft recycling in the context of sustainable development [Communication écrite]. SAE 2014 Aerospace Manufacturing and Automated Fastening Conference & Exhibition (AMAF 2014), Salt Lake City, Utah, USA (14 pages). Lien externe
Keivanpour, S., Mascle, C., & Ait-Kadi, D. (2014). Toward a decision tool for eco-design strategy selection of aircraft manufacturers considering stakeholders value network. SAE International Journal of Materials and Manufacturing, 7(1), 73-83. Lien externe
Kerboua, Y., & Lakis, A. A. (2014). Dynamic behaviour of a rocket filled with liquid. Universal Journal of Aeronautical & Aerospace Sciences, 2, 55-79. Lien externe
Keshavarz Khorasgani, M. (2014). Synthesis and Characterization of Bismuth Telluride-Based Nanostructured Thermoelectric Composite Materials [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Keshavarz, M. K., Vasilevskiy, D., Masut, R. A., & Turenne, S. (juin 2013). Effect of suppression of grain growth of hot extruded (Bi 0.2Sb0.8)2Te3 thermoelectric alloys by MoS2 nanoparticles [Communication écrite]. International Conference on Thermoelectrics 2013, Kobe, Japan. Publié dans Journal of Electronic Materials, 43(6). Lien externe
Keshavarz, M. K., Vasilevskiy, D., Masut, R. A., & Turenne, S. (2014). Synthesis and characterization of bismuth telluride-based thermoelectric nanocomposites containing MoS2 nano-inclusions. Materials Characterization, 95, 44-49. Lien externe
Keshmiri, M., Xie, W.-F., & Mohebbi, A. (2014). Augmented image-based visual servoing of a manipulator using acceleration command. IEEE Transactions on Industrial Electronics, 61(10), 5444-5452. Lien externe
Khakpour, H. (2014). Design and Optimization of a Robot for Abrasive Waterjet Polishing of Hydraulic Turbine Blades [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Khakpour, H., & Birglen, L. (septembre 2014). Workspace augmentation of spatial 3-DOF cable parallel robots using differential actuation [Communication écrite]. IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2014), Chicago, IL, United states. Lien externe
Khakpour, H., Birglen, L., & Tahan, S.-A. (2014). Synthesis of differentially driven planar cable parallel manipulators. IEEE Transactions on Robotics, 30(3), 619-630. Lien externe
Khakpour, H., Birglen, L., Tahan, A., & Paquet, F. (septembre 2014). Experimental study on abrasive waterjet polishing of hydraulic turbine blades [Communication écrite]. 27th IAHR Symposium on Hydraulic Machinery and Systems (IAHR 2014), Montréal, Québec (10 pages). Disponible
Khelghatibana, M. (2014). An Approach for Aerodynamic Optimization of Transonic Fan Blades [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Khelghatibana, M., Trépanier, J.-Y., Tribes, C., & Nichols, J. (novembre 2014). Multi-objective and multi-point aerodynamic optimization of transonic fan blades [Communication écrite]. ASME International Mechanical Engineering Congress & Exposition (IMECE 2014), Montréal, Québec (10 pages). Lien externe
Kim, E.-J., Bernier, M., Cauret, O., & Roux, J.-J. (2014). A hybrid reduced model for borehole heat exchangers over different time-scales and regions. Energy, 77, 318-326. Lien externe
Klincevicius, M. G. Y., Aubin, C.-É., Villemure, I., & Mac-Thiong, J.-M. (octobre 2014). Comparison of forces acting on intervertebral discs distal to surgical instrumentation between selective and non-selective thoracic fusion [Communication écrite]. 44e réunion de la Société de scoliose du Québec (SSQ), Québec City, Canada. Non disponible
Koenig, H. (2014). Développement d'un modèle paramétrable pour l'étude de l'influence de la position d'un cycliste sur son aérodynamisme [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Krebs, M., Quintana, H. J., & Kummert, M. (septembre 2014). Potential of decentralized heat pumps to improve the financial viability of a solar district heating system with seasonal thermal storage [Communication écrite]. 2014 ASHRAE/IBPSA-USA Building Simulation Conference (SimBuild 2014), Atlanta, GA, USA. Lien externe
Laberge Lebel, L., Lachance, J. P., Brunel, J. E., Jamin, T., & Dube, M. (août 2014). Modeling of Out-of-Plane Stresses in C/PPS Composite L-Shape Brackets [Communication écrite]. 10th Joint Canada-Japan Workshop on Composites, Vancouver, Canada. Lien externe
Laitenberger, M., Begon, M., Gaudet, G., Périé-Curnier, D., Dal Maso, F., & Raison, M. (juin 2014). Impact of the forearm modeling refinement on the upper limb joint kinematics and dynamics [Communication écrite]. 3rd International Multibody System Dynamics Conference (IMSD 2014), Busan, Korea. Non disponible
Laitenberger, M., Raison, M., Gaudet, G., Périé-Curnier, D., Dal Maso, F., & Begon, M. (juillet 2014). Forearm modeling refinement : sensitivity on the upper limb osteo-articular kinematics and dynamics [Communication écrite]. 11th World congress on computational mechanics (WCCM 2014), Barcelona, Spain. Non disponible
Lakis, A. A., Menna, M., & Toorani, M. (juillet 2014). Aeroelastic analysis of spherical shells [Communication écrite]. 5th European Conference and 11th World Congress on Computational Mechanics (ECCM/WCCM 2014), Barcelona, Spain. Lien externe
Lakis, A. A., Ramzi, R., & Toorani, M. (juin 2014). Non-linear dynamic analysis of cylindrical shells subjected to a supersonic flow [Communication écrite]. 7th Chaotic Modeling and Simulation International Conference (CHAOS 2014), Lisbon, Portugal. Non disponible
Lanouette, A. M., Potvin, M. J., Martin, F., Mondor, S., Houle, D., & Therriault, D. (avril 2014). Experimental Evaluation of the Canadarm2 Residual Flexural Strength After an Orbital Debris Impact [Communication écrite]. 13th European Conference on Spacecraft Structures, Materials & Environmental Testing, Braunschweig, Germany. Lien externe
Lanouette, A.-M. (2014). Évaluation de l'effet structurel de l'impact d'un micrométéorite ou d'un débris orbital sur le bras canadien 2 [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Lapalme, M., Hoseini, M., Bocher, P., Colle, A. R., & Lévesque, M. (2014). Realistic Cold Expansion Finite Element Model and Experimental Validations for Aluminium Alloys. Experimental Mechanics, 54(5), 841-855. Lien externe
Le Naveaux, F., Aubin, C.-É., Parent, S., & Labelle, H. (octobre 2014). Does rod contouring affect 3D curve correction of adolescent idiopathic scoliosis? [Communication écrite]. 44e réunion de la Société de scoliose du Québec (SSQ), Québec City, Canada. Non disponible
Le Naveaux, F., Aubin, C.-É., Parent, S., Newton, P., & Labelle, H. (mai 2014). Le cintrage des tiges d'instrumentation affecte-t-il la correction 3D des courbures de la scoliose idiopathique adolescente? [Communication écrite]. 34e Journée de la recherche du POES de la Division d'Orthopédie de l'Université de Montréal, Montréal, Québec. Non disponible
Le Naveaux, F., Larson, A. N., Labelle, H., & Aubin, C.-É. (octobre 2014). Does implant pattern preferences have an effect on correction approach? [Communication écrite]. 44e réunion de la Société de scoliose du Québec (SSQ), Québec City, Canada. Non disponible
LeBel, F., Fanaei, A. E., Ruiz, E., & Trochu, F. (2014). Prediction of optimal flow front velocity to minimize void formation in dual scale fibrous reinforcements. International Journal of Material Forming, 7(1), 93-116. Lien externe
Leclaire, S., El-Hachem, M., Trépanier, J.-Y., & Reggio, M. (2014). High Order Spatial Generalization of 2D and 3D Isotropic Discrete Gradient Operators with Fast Evaluation on GPUs. Journal of Scientific Computing, 59(3), 545-573. Lien externe
Leclaire, S., Pellerin, N., Reggio, M., & Trépanier, J.-Y. (2014). Multiphase flow modeling of spinodal decomposition based on the cascaded lattice Boltzmann method. Physica A: Statistical Mechanics and its Applications, 406, 307-319. Lien externe
Leclaire, S., Pellerin, N., Reggio, M., & Trépanier, J.-Y. (2014). Unsteady immiscible multiphase flow validation of a multiple-relaxation-time lattice Boltzmann method. Journal of Physics A: Mathematical and Theoretical, 47(10), 24-24. Lien externe
Lévesque, M., Miao, H. Y., Gariepy, A., & Levers, A. (septembre 2014). Prediction of shot peen forming through direct finite element simulation [Communication écrite]. 12th International Conference on Shot Peening, Goslar, Germany. Lien externe
Liaghat, T. (2014). Two-Way Fluid-Structure Coupling in Vibration and Damping Analysis of an Oscillating Hydrofoil [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Los, A., & Mayer, J. R. R. (novembre 2014). Uncertainty estimation of a five-axis machine tool calibration using the adaptive Monte Carlo method [Communication écrite]. 29th Annual Meeting of the American Society for Precision Engineering (ASPE 2014), Boston, MA, United states. Non disponible
Macdonald, F., D'Avignon, K., Kummert, M., & Daoud, A. (décembre 2014). A TRNSYS-LabVIEW bi-directional connection for HVAC equipment testing using hardware-in-the-loop simulation [Communication écrite]. 9th International Conference on System Simulation in Buildings (SSB 2014), Liège, BEL. Lien externe
Mahaudens, P., Raison, M., Banse, X., Mousny, M., & Detrembleur, C. (2014). Effect of long-term orthotic treatment on gait biomechanics in adolescent idiopathic scoliosis. Spine Journal, 14(8), 1510-1519. Lien externe
Majdouline, Y., Ohayon, J., Keshavarz-Motamed, Z., Roy Cardinal, M.-H., Garcia, D., Allard, L., Lerouge, S., Arsenault, F., Soulez, G., & Cloutier, G. (2014). Endovascular shear strain elastography for the detection and characterization of the severity of atherosclerotic plaques: In vitro validation and in vivo evaluation. Ultrasound in Medicine and Biology, 40(5), 890-903. Lien externe
Marouane, H., Shirazi-Adl, A., Adouni, M., & Hashemi, J. (2014). Steeper posterior tibial slope markedly increases ACL force in both active gait and passive knee joint under compression. Journal of Biomechanics, 47(6), 1353-1359. Lien externe
Marouane, H., Shirazi-Adl, A., Adouni, M., & Hashemi, J. (juillet 2014). Steeper Posterior Tibial Slope Markedly Increases Forces in Anterior Cruciate Ligament [Affiche]. 7th World Congress of Biomechanics, Boston, Mass.. Non disponible
Marouane, H., Shirazi-Adl, A., Adouni, M., & Hashemi, J. (mars 2014). Steeper posterior tibial slope substantially increases ACL force both in gait and in isolated knee joint in compression at all flexion angles [Communication écrite]. 60th Annual Meeting of the Orthopaedic Research Society, New Orleans, Louisiana. Lien externe
Mascle, C., & Gosse, J. (2014). Inventory management maximization based on sales forecast : case study. Production Planning & Control, 25(12), 1039-1057. Lien externe
Mascle, C., Cai, Y. L., & Camelot, A. (septembre 2014). Information technology for processing and treating aircraft end of life [Communication écrite]. 5th International Conference on Information Technology for Manufacturing Systems (ITMS 2014), Singapore. Publié dans Applied Mechanics and Materials, 686. Lien externe
Mbeh, D. A., Akhavan, O., Javanbakht, T., Mahmoudi, M., & Yahia, L. (2014). Cytotoxicity of protein corona-graphene oxide nanoribbons on human epithelial cells. Applied Surface Science, 320, 596-601. Lien externe
Mchichi, N. A., & Mayer, J. R. R. (juin 2014). Axis location errors and error motions calibration for a five-axis machine tool using the SAMBA method [Communication écrite]. 6th CIRP International Conference on High Performance Cutting (HPC2014), Berkeley, California. Publié dans Procedia CIRP, 14. Lien externe
McSorley, G. (2014). A Novel Approach to Product Lifecycle Management and Engineering Based on Product In-Use Information [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Menaa, M., & Lakis, A. A. (2014). Numerical investigation of the flutter of a spherical shell. Journal of Vibration and Acoustics, 136(2), 16 pages. Lien externe
Menaa, M., & Lakis, A. A. (2014). Supersonic flutter of a spherical shell partially filled with fluid. American Journal of Computational Mathematics, 4(3), 153-182. Disponible
Menard, A.-L., Grimard, G., Valteau, B., Londono, I., Moldovan, F., & Villemure, I. (2014). In Vivo Dynamic Loading Reduces Bone Growth Without Histomorphometric Changes of the Growth Plate. Journal of Orthopaedic Research, 32(9), 1129-1136. Lien externe
Menard, A.-L., Soulisse, C., Raymond, P., Londono, I., & Villemure, I. (2014). Effect of cold storage and freezing on the biomechanical properties of swine growth plate explants. Journal of Biomechanical Engineering, 136(4). Lien externe
Miao, H. Y., Lebon, R., Lévesque, M., & Bocher, P. (septembre 2014). Residual stress measurement correction on shot peened AA2024 by finite element analysis [Communication écrite]. 12th International Conference on Shot Peening, Goslar, Germany. Lien externe
Miron, P., Vétel, J., & Garon, A. (2014). On the use of the finite-time Lyapunov exponent to reveal complex flow physics in the wake of a mechanical valve. Experiments in Fluids, 55(9), 15 pages. Lien externe
Moatari-Kazerouni, A., Hisarciklilar, O., Achiche, S., & Thomson, V. (août 2014). Impact of the business innovation strategy on new product development success measurement [Communication écrite]. 2014 International Conference on Innovative Design and Manufacturing (ICIDM 2014), Montréal, Québec. Lien externe
Mohebbi, A., Achiche, S., & Baron, L. (juillet 2014). Mechatronic multicriteria profile (MMP) for conceptual design of a robotic visual servoing system [Communication écrite]. 12th ASME Biennial Conference on Engineering Systems Design and Analysis (ESDA 2014), Copenhagen, Denmark (10 pages). Lien externe
Mohebbi, A., Baron, L., Achiche, S., & Birglen, L. (novembre 2014). Fuzzy decision making for conceptual design of a visual servoing system using mechatronic multi-criteria profile (MMP) [Communication écrite]. ASME 2014 International Mechanical Engineering Congress & Exposition (IMECE 2014), Montréal, Québec (10 pages). Lien externe
Mohebbi, A., Baron, L., Achiche, S., & Birglen, L. (août 2014). Neural network-based decision support for conceptual design of a mechatronic system using mechatronic multi-criteria profile (MMP) [Communication écrite]. 2014 International Conference on Innovative Design and Manufacturing (ICIDM 2014), Montréal, Québec. Lien externe
Mohebbi, A., Baron, L., Achiche, S., & Birglen, L. (août 2014). Trends in concurrent, multi-criteria and optimal design of mechatronic systems: A review [Communication écrite]. 2014 International Conference on Innovative Design and Manufacturing (ICIDM 2014), Montréal, Québec. Lien externe
Mohebbi, A., Keshmiri, M., & Xie, W. F. (juillet 2014). An eye-in-hand stereo visual servoing for tracking and catching moving objects [Communication écrite]. 33rd Chinese Control Conference (CCC 2014), Nanjing, China. Lien externe
Moradi, H. (2014). Optimization of Cutting Parameters for Pocket Milling on the Skin Plate in Al and Al-Li Materials [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Mortada, M.-A., Yacout, S., & Lakis, A. A. (2014). Fault diagnosis in power transformers using multi-class logical analysis of data. Journal of Intelligent Manufacturing, 25(6), 1429-1439. Lien externe
Mortazavi, F., Ghossein, E., Lévesque, M., & Villemure, I. (2014). High resolution measurement of internal full-field displacements and strains using global spectral digital volume correlation. Optics and Lasers in Engineering, 55, 44-52. Lien externe
Motaghinasab, S., Shirazi-Adl, A., Parnianpour, M., & Urban, J. P. G. (2014). Disc size markedly influences concentration profiles of intravenously administered solutes in the intervertebral disc: a computational study on glucosamine as a model solute. European Spine Journal, 23(4), 715-723. Lien externe
Mukherjee, A., Raison, M., Sahni, T., Arya, A., Lambert, J., Marois, P., James, P. B., Parent, A., & Ballaz, L. (2014). Intensive rehabilitation combined with HBO₂ therapy in children with cerebral palsy: a controlled longitudinal study. Undersea and Hyperbaric Medicine Journal, 41(2), 77-85. Lien externe
Mureithi, N. W., Xu, X., Baranyi, L., Nakamura, T., & Kaneko, S. (juillet 2014). Dynamics of the Forced Karman Wake: Comparison of 2D and 3D Models [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2014), Anaheim, CA, USA (10 pages). Lien externe
Nabatian, N. (2014). Dynamics and Control of Bluff-Body-Wake-Structure Interaction [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Najafi Chaloupli, N., Heuzey, M.-C., Carreau, P., Therriault, D., & Park, C. B. (2014). Rheological and foaming behavior of linear and branched polylactides. Rheologica Acta, 53(10-11), 779-790. Disponible
Naz, S. (2014). Multidisciplinary Design Optimization (MDO) of Transonic Fan Blade [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Naz, S., Trépanier, J.-Y., Tribes, C., Petro, E., & Nichols, J. (juin 2014). A comparison of Multi-Disciplinary Design Optimization (MDO) formulations for Transonic Fan Blade Design [Communication écrite]. 1st International Conference on Engineering and Applied Sciences Optimization (OPT-i 2014), Kos Island, Greece. Non disponible
Naz, S., Tribes, C., Trépanier, J.-Y., Nichols, J., & Petro, E. (novembre 2014). Multi-disciplinary design optimization of transonic fan blade design using analytical target cascading [Communication écrite]. ASME International Mechanical Engineering Congress & Exposition (IMECE 2014), Montréal, Québec (11 pages). Lien externe
Ndiaye, D., & Bernier, M. (juin 2014). One and Two Time Constant Models to Predict the Capacity of Geothermal Heat Pumps in Cycling Conditions [Communication écrite]. 2014 ASHRAE Annual Conference, Seattle, WA, USA. Publié dans ASHRAE Transactions, 120(2). Lien externe
Niknam, S. A., Wygowski, W., Balazinski, M., & Songmene, V. (2014). Milling Burr Formation and Avoidance. Dans Machinability of Advanced Materials (p. 57-93). Lien externe
Olala, S., & Mureithi, N. W. (novembre 2014). Streamwise fluidelastic instability of tube arrays in two-phase cross flow [Communication écrite]. ASME International Mechanical Engineering Congress & Exposition (IMECE 2014), Montréal, Québec (11 pages). Lien externe
Olala, S., Mureithi, N. W., Sawadogo, T., & Pettigrew, M. J. (juillet 2014). Streamwise fluidelastic forces in tube arrays subjected to two-phase flows [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2014), Anaheim, CA, United states. Lien externe
Olivieri, P., Birglen, L., Maldague, X., & Mantegh, I. (2014). Coverage path planning for eddy current inspection on complex aeronautical parts. Robotics and Computer-Integrated Manufacturing, 30(3), 305-314. Lien externe
Olivieri, P., Birglen, L., Maldague, X., & Mantegh, I. (2014). Path planning for eddy current inspection around probable defects. Canadian Aeronautics and Space Journal, 60(3), 49-57. Lien externe
Oulmane, A. (2014). Surveillance et diagnostic des défauts des machines tournantes dans le domaine temps-fréquences utilisant les réseaux de neurones et la logique floue [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Oulmane, A., Lakis, A. A., & Mureithi, N. W. (2014). Application of Fourier descriptors & artificial neural network to bearing vibration signals for fault detection & classification. Universal Journal of Aeronautical & Aerospace Sciences, 2, 37-54. Lien externe
Pahlavanpour, M., Hubert, P., & Lévesque, M. (2014). Numerical and Analytical Modeling of the Stiffness of Polymer-Clay Nanocomposites With Aligned Particles: One- and Two-Step Methods. Computational Materials Science, 82, 122-130. Lien externe
Paquet, D., Lanteigne, J., Bernard, M., & Baillargeon, C. (2014). Characterizing the effect of residual stresses on high cycle fatigue (HCF) with induction heating treated stainless steel specimens. International Journal of Fatigue, 59, 90-101. Lien externe
Pasha, S., Aubin, C.-É., Labelle, H., Mac-Thiong, J.-M., & Parent, S. (juillet 2014). Estimation of the personalized 3D position of the center of mass in adolescent idiopathic scoliosis (AIS) [Communication écrite]. 21st International Meeting on Advanced Spine Techniques, Valencia, Spain. Publié dans European Spine Journal, 17(3). Non disponible
Pasha, S., Aubin, C.-É., Parent, S., Labelle, H., & Mac-Thiong, J.-M. (2014). Biomechanical loading of the sacrum in adolescent idiopathic scoliosis. Clinical Biomechanics (Bristol, Avon), 29(3), 296-303. Lien externe
Pasha, S., Aubin, C.-É., Sangole, A. P., Labelle, H., Parent, S., & Mac-Thiong, J.-M. (2014). Three-dimensional spino-pelvic relative alignment in adolescent idiopathic scoliosis. Spine (PA 1976), 39(7), 564-570. Lien externe
Pasquier, P., Hénault, B., & Kummert, M. (mai 2014). Financial optimization of hybrid geoexchange systems [Communication écrite]. 7th Canadian Geothermal Heat Pump Business & Policy Forum, Montréal, Québec. Non disponible
Passieux, R., Therriault, D., & Gosselin, F. (novembre 2014). Creation of Sacrificial Bonds by Viscous Flow Instability [Communication écrite]. ASME International Mechanical Engineering Congress & Exposition (IMECE 2014), Montréal, Québec. Lien externe
Pea, R., Aubin, C.-É., Cobetto, N., Clin, J., & Sanders, J. (octobre 2014). 3D biomechanical analysis of casting for early onset scoliosis [Communication écrite]. 44e réunion de la Société de scoliose du Québec (SSQ), Québec City, Canada. Non disponible
Pellerin, N., Leclaire, S., & Reggio, M. (2014). Equilibrium distributions for straight, curved, and immersed boundary conditions in the lattice Boltzmann method. Computers and Fluids, 101, 126-135. Lien externe
Pelletier, É. (2014). Étude expérimentale et modélisation de l'impact entre une bulle et une structure [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Pelletier, É., Béguin, C., & Étienne, S. (juillet 2014). Simple model for bubble-wall interaction [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2014), Anaheim, CA, United states (11 pages). Lien externe
Périé-Curnier, D., Balosetti, C., Achiche, S., & Labelle, H. (mai 2014). MRI signal texture parameters within human intervertebral discs as biomarkers of spine pathologies and severities [Communication écrite]. Joint Annual Meeting ISMRM-ESMRMB 2014, Milan, Italy. Lien externe
Pétrissans, A., Younsi, R., Chaouch, M., Gérardin, P., & Pétrissans, M. (2014). Wood thermodegradation: experimental analysis and modeling of mass loss kinetics. Maderas. Ciencia y tecnología, 16(2), 133-148. Disponible
Pettigrew, M. J., Besner, B., Mureithi, N. W., Lafrance, T., & Patrick, J. M. (juillet 2014). Development of fiber-optic probes to measure two-phase flow dynamic parameters in support of flow-induced vibration studies [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2014), Anaheim, CA, United states. Lien externe
Plagnard, T., Béguin, C., & Étienne, S. (juillet 2014). Predicting Fluidelastic Instability in Tube Array With Potential Theory [Communication écrite]. ASME Pressure Vessels and Piping (PVP 2014), Anaheim, California (11 pages). Lien externe
Pouliot-Laforte, A., Parent, A., & Ballaz, L. (2014). Walking efficiency in children with cerebral palsy: relation to muscular strength and gait parameters. Computer Methods in Biomechanics and Biomedical Engineering, 17(SUPP1), 104-105. Lien externe
Prabha, H., Marleau, G., & Hébert, A. (2014). Tracking algorithms for multi-hexagonal assemblies (2D and 3D). Annals of Nuclear Energy, 69, 175-182. Lien externe
Prieto-Vargas, L., Turenne, S., Vasilevskiy, D., & Masut, R. A. (octobre 2013). Design optimization by numerical simulation of segmented-legs Bi 2Te3 based thermoelectric generator module [Communication écrite]. Materials Science and Technology Conference and Exhibition (MS and T 2013), Montréal, Québec. Non disponible
Rahmani, B. (2014). In-Situ Mechanical Properties Identification of Composite Materials Using Inverse Methods Based on Full-Field Measurements [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Rahmani, B., Ghossein, E., Villemure, I., & Lévesque, M. (2014). In-situ mechanical properties identification of 3D particulate composites using the Virtual Fields Method. International Journal of Solids and Structures, 51(18), 3076-3086. Lien externe
Rahmani, B., Villemure, I., & Lévesque, M. (2014). Regularized virtual fields method for mechanical properties identification of composite materials. Computer Methods in Applied Mechanics and Engineering, 278, 543-566. Lien externe
Rak, M., Woniak, A., & Mayer, J. R. R. (avril 2014). Review of interpolation methods for point cloud modelling in coordinate metrology [Communication écrite]. 11th International Scientific Conference on Coordinate Measuring Technique (CMT 2014), Bielsko-Biala, Poland. Non disponible
Ravey, C., Ruiz, E., & Trochu, F. (2014). Determination of the optimal impregnation velocity in Resin Transfer Molding by capillary rise experiments and infrared thermography. Composites Science and Technology, 99, 96-102. Lien externe
Ren, Q., Balazinski, M., Baron, L., Jemielniak, K., Botez, R., & Achiche, S. (2014). Type-2 fuzzy tool condition monitoring system based on acoustic emission in micromilling. Information Sciences, 255, 121-134. Lien externe
Rigaud, M. (septembre 2013). Graduate programs in refractory engineering : what is duly needed? [Communication écrite]. 13th Biennal Worldwide Congress on Refractories, Victoria, British Columbia, Canada. Lien externe
Rigaud, M. (octobre 2014). On refractory castable engineering : the book! [Communication écrite]. ALAFAR, Santiago, Chili. Non disponible
Rimpault, X., Chatelain, J.-F., Sapieha, J.-E., & Balazinski, M. (juin 2014). Burr Height Study for Drilling Carbon Epoxy Composite/Titanium/Aluminium Stacks [Communication écrite]. Joint Conference on Mechanical, Design Engineering & Advanced Manufacturing (JCM 2014), Toulouse France. Non disponible
Rimpault, X., Chatelain, J.-F., Sapieha, J.-E., & Balazinski, M. (mai 2014). Cutting parameter impact on forces and on hole diameter while drilling CFRP/titanium/aluminium stacks [Communication écrite]. 3rd International Conference on Virtual Machining Process Technology (VMPT 2014), University of Calgary, Calgary, Alberta. Non disponible
Robitaille, M. (2014). Conception aérodynamique d'un profil d'aile transsonique laminaire adaptable aux conditions de vol [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Sabri, F., & Lakis, A. A. (2014). Efficient hybrid finite element method for flutter prediction of functionally graded cylindrical shells. Journal of Vibration and Acoustics, 136(1). Lien externe
Sadeghi Hassanlouei, A. (2014). Investigation of the Frequency Response of Constant Voltage Anemometers in Turbulent Flows [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Sagol, E. (2014). Three Dimensional Numerical Prediction of Icing Related Power and Energy Losses on a Wind Turbine [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Salem, O., Wang, H., Alaseem, A. M., Ciobanu, O., Hadjab, I., Gawri, R., Antoniou, J., & Mwale, F. (2014). Naproxen affects osteogenesis of human mesenchymal stem cells via regulation of Indian hedgehog signaling molecules. Arthritis Research and Therapy, 16(4). Disponible
Salim Shirazi, A., & Bernier, M. (2014). A small-scale experimental apparatus to study heat transfer in the vicinity of geothermal boreholes. International Journal of Heating, Ventilating, Air-Conditioning and Refrigeration Research, 20(7), 819-827. Lien externe
Salvi, G., Aubin, C.-É., & Parent, S. (octobre 2014). Biomechanical analysis of Ponte and pedicle subtraction osteotomies for the surgical correction of kyphotic deformities [Communication écrite]. 44e réunion de la Société de scoliose du Québec (SSQ), Québec City, Canada. Non disponible
Samadi, B., Raison, M., Detrembleur, C., & Ballaz, L. (septembre 2014). Real-time detection of reaction forces during gait on a ground equipped with a large force platform [Communication écrite]. 2014 Global Information Infrastructure and Networking Symposium, GIIS 2014, Montréal, Québec. Lien externe
Sawadogo, T., & Mureithi, N. W. (2014). Fluidelastic instability study in a rotated triangular tube array subject to two-phase cross-flow. Part I: Fluid force measurements and time delay extraction. Journal of Fluids and Structures, 49, 1-15. Lien externe
Sawadogo, T., & Mureithi, N. W. (2014). Fluidelastic instability study on a rotated triangular tube array subject to two-phase cross-flow. Part II: Experimental tests and comparison with theoretical results. Journal of Fluids and Structures, 49, 16-28. Lien externe
Sawadogo, T., Han, Y., & Mureithi, N. W. (juillet 2014). Implementation in vibic of an improved time-domain simulation model for fluidelastic instability in Tube arrays [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2014), Anaheim, CA, United states. Lien externe
Schlechtingen, M., Achiche, S., Costa, T. L., Raison, M., & Santos, I. (juin 2014). Using data mining approaches for force prediction of a dynamically loaded flexible structure [Communication écrite]. 12th Biennial conference on engineering systems design and analysis (ESDA 2014), Copenhagen, Denmark. Lien externe
Schmidt, H., Bashkuev, M., Galbusera, F., Wilke, H.-J., & Shirazi-Adl, A. (2014). Finite element study of human lumbar disc nucleus replacements. Computer Methods in Biomechanics and Biomedical Engineering, 17(16), 1762-1776. Lien externe
Schmidt, H., Shirazi-Adl, A., Bashkuev, C., Schilling, C., & Dreischarf, M. (juillet 2014). On the fluid flow mechanisms in the intervertebral disc under physiological dynamic loading-unloading cycles [Communication écrite]. 7th World Congress of Biomechanics, Boston, Mass.. Non disponible
Shaban, Y., Aramesh, M., Yacout, S., Balazinski, M., Attia, H., & Kishawy, H. (mai 2014). Optimal replacement of tool during turning titanium metal matrix composites [Communication écrite]. IIE Annual Conference and Expo 2014, Montréal, Québec. Non disponible
Shaban, Y., Meshreki, M., Yacout, S., Balazinski, M., & Attia, H. (2014). Process control based on pattern recognition for routing carbon fiber reinforced polymer. Journal of Intelligent Manufacturing, 28(1), 165-179. Lien externe
Shahvarpour, A., Shirazi-Adl, A., Bazrgari, B., & Larivière, C. (juillet 2014). Experimental and Computational Investigation of Trunk Response to Sudden Forward Perturbations [Communication écrite]. 7th World Congress of Biomechanics, Boston, Mass.. Non disponible
Shahvarpour, A., Shirazi-Adl, A., Mecheri, H., & Lariviere, C. (2014). Trunk response to sudden forward perturbations - Effects of preload and sudden load magnitudes, posture and abdominal antagonistic activation. Journal of Electromyography and Kinesiology, 24(3), 394-403. Lien externe
Shiraz, M. Z., Étienne, S., Molin, B., Damblans, G., & Pelletier, D. (juin 2014). Rotational galloping of square and bundle cylinders in cross-flow at low reynolds numbers [Communication écrite]. 24th International Ocean and Polar Engineering Conference (ISOPE 2014), Busan, Korea, Republic of. Non disponible
Song, R., Chen, Z., & Mayer, J. R. R. (août 2014). Blank design for the stretch forming of aircraft skin [Communication écrite]. International Conference on Innovative Design and Manufacturing (ICIDM 2014), Montréal, Québec. Lien externe
Tafazzol, A., Arjmand, N., Shirazi-Adl, A., & Parnianpour, M. (2014). Lumbopelvic rhythm during forward and backward sagittal trunk rotations: Combined in vivo measurement with inertial tracking device and biomechanical modeling. Clinical Biomechanics, 29(1), 7-13. Lien externe
Tajeddini, V., Lin, C.-H., Muliana, A., & Lévesque, M. (2014). Average electro-mechanical properties and responses of active composites. Computational Materials Science, 82, 405-414. Lien externe
Talwar, B. S., Guo, S., Chizari, K., & Therriault, D. (novembre 2014). Investigation of carbon nanotubes mixing methods and functionalizations for electrically conductive polymer composites [Communication écrite]. ASME International Mechanical Engineering Congress and Exposition (IMECE 2014), Montréal, Québec (5 pages). Lien externe
Teyssedou, A., Necciari, R., Reggio, M., Zadeh, F. M., & Étienne, S. (2014). Moderator Flow Simulation Around Calandria Tubes of Candu-6 Nuclear Reactors. Engineering Applications of Computational Fluid Mechanics, 8(1), 178-192. Lien externe
Thomassin, J., Mureithi, N. W., & Vo, H. D. (2014). Mixing layer resonance under high-speed stream forcing. Journal of Sound and Vibration, 333(24), 6453-6473. Lien externe
Tixier, E. (2014). Modélisation par une approche milieu poreux de l'instabilité fluidélastique dans un faisceau de tubes soumis à un écoulement diphasique transverse [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Tixier, E., Béguin, C., Étienne, S., Pelletier, D., Hay, A., & Ricciardi, G. (janvier 2014). Fluid-structure interactions in a tube bundle subject to cross-flow. Part A: Porous medium approach [Communication écrite]. 52nd AIAA Aerospace Sciences Meeting - AIAA Science and Technology Forum and Exposition, SciTech 2014, National Harbor, Maryland. Lien externe
Tixier, E., Béguin, C., Étienne, S., Pelletier, D., Hay, A., & Ricciardi, G. (juin 2014). Fluid-structure interactions in a tube bundle subject to cross-flow. Part B: Two-phase flow modeling [Communication écrite]. 11th AIAA/ASME Joint Thermophysics and Heat Transfer Conference 2014, AIAA AVIATION 2014, Atlanta, GA, United states. Lien externe
Tixier, E., Béguin, C., Étienne, S., Pelletier, D., Hay, A., & Ricciardi, G. (juin 2014). A porous medium approach to model Fluid-Structure Interactions in tube bundles [Communication écrite]. 22nd Annual Conference of the CFD Society of Canada, Toronto, Ontario. Non disponible
Tixier, E., Béguin, C., Étienne, S., Pelletier, D., Hay, A., & Ricciardi, G. (janvier 2014). A Porous Medium Formulation for Fluid-Structure Interactions in a Tube Bundle Subject to Two-Phase Cross-Flow [Communication écrite]. AIAA Science and Technology Forum and Exposition 2014 (SCITECH 2014), National Harbor, MD. Non disponible
Torry-Smith, J. M., Mortensen, N. H., & Achiche, S. (2014). A proposal for a classification of product-related dependencies in development of mechatronic products. Research in Engineering Design, 25(1), 53-74. Lien externe
Trudel, A., Lévesque, M., & Brochu, M. (2014). Microstructural effects on the fatigue crack growth resistance of a stainless steel CA6NM weld. Engineering Fracture Mechanics, 115, 60-72. Lien externe
Trudel, A., Sabourin, M., Lévesque, M., & Brochu, M. (2014). Fatigue crack growth in the heat affected zone of a hydraulic turbine runner weld. International Journal of Fatigue, 66, 39-46. Lien externe
Urquiza, J. M., Garon, A., & Farinas, M.-I. (2014). Weak imposition of the slip boundary condition on curved boundaries for Stokes flow. Journal of Computational Physics, 256, 748-767. Lien externe
Verma, V., Rajesh, P. S. M., Bodkhe, S., & Kamle, S. (février 2014). Bacterial cellulose enhances beta phase in PVDF [Communication écrite]. Advanced Composites for Aerospace, Marine, and Land Applications - TMS 2014 143rd Annual Meeting and Exhibition, Orlando, Florida. Lien externe
Vernet, N., Ruiz, E., Advani, S., Alms, J. B., Aubert, M., Barburski, M., Barari, B., Beraud, J. M., Berg, D. C., Correia, N., Danzi, M., Delavière, T., Dickert, M., Di Fratta, C., Endruweit, A., Ermanni, P., Francucci, G., Garcia, J. A., George, A., ... Ziegmann, G. (2014). Experimental determination of the permeability of engineering textiles: Benchmark II. Composites Part A: Applied Science and Manufacturing, 61, 172-184. Lien externe
Vidal, J.-F., Bay, C., Archier, P., Palau, J.-M., Rimpault, G., Roque, B., Tommasi, J., & Hébert, A. (septembre 2014). Transport core solver validation for the astrid conceptual design study with APOLLO3 [Communication écrite]. International Conference on the Role of Reactor Physics toward a Sustainable Future (PHYSOR 2014), Kyoto, Japan. Non disponible
Woo Gun, S., & Mureithi, N. W. (2014). A two-phase damping model on tube bundles subjected to two-phase cross-flow. Journal of Mechanical Science and Technology, 28(2), 553-563. Lien externe
Woźniak, A., & Mayer, J. R. R. (2014). Metoda korekcji promienia końcówki w pomiarach skaningowych WMP. Mechanik, 87, 424-429. Non disponible
Wu, J., Aubin, C.-É., Kadoury, S., Parent, S., & Labelle, H. (octobre 2014). Three dimensional classification of adolescent idiopathic scoliosis (AIS) using a fuzzy-clustering algorithm [Communication écrite]. 44e Réunion de la Société de scoliose du Québec, Québec City, Canada. Non disponible
Xuan-Truong, D., Balazinski, M., & Mayer, J. R. R. (novembre 2014). Chaotic tool wear during machining of titanium metal matrix composite (TiMMCs) [Communication écrite]. ASME International Mechanical Engineering Congress & Exposition (IMECE 2014), Montréal, Québec (9 pages). Lien externe
Yazji, M., Raison, M., Mahaudens, P., Detrembleur, C., Mousny, M., Labelle, H., & Aubin, C.-É. (juillet 2014). Comparison of lower limb joint efforts during gait between healthy and scoliotic adolescents [Communication écrite]. 11th World congress on computational mechanics (WCCM 2014), Barcelona, Spain. Non disponible
Yu, K. R. (2014). Flow-Induced Vibrations of In-Line Cylinder Arrangements at Low Reynolds Numbers [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Yu, K. T. R., Étienne, S., Hay, A., & Pelletier, D. (janvier 2014). Code verification for unsteady 3-D fluid-structure interaction problems [Communication écrite]. 52nd AIAA Aerospace Sciences Meeting - AIAA Science and Technology Forum and Exposition, SciTech 2014, National Harbor, Maryland. Lien externe
Zabarjad Shiraz, M. (2014). Determination of Galloping for Non-Circular Cross-Section Cylinders [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Zhang, K., Roofigari Esfahani, N., Quintana, H., & Kummert, M. (décembre 2014). Assessing simplified and detailed models for predictive control of space heating in homes [Communication écrite]. 9th International Conference on System Simulation in Buildings (SSB 2014), Liège, BEL. Lien externe
Zoghlami, S., Béguin, C., & Étienne, S. (juillet 2014). Development of a numerical model for quasi-periodic forces of two-phase cross flow in tube bundles [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2014), Anaheim, CA, United states (9 pages). Lien externe
