 | Monter d'un niveau |
Achiche, S., & Ahmed-Kristensen, S. (2011). Genetic fuzzy modeling of user perception of three-dimensional shapes. Artificial Intelligence for Engineering Design, Analysis and Manufacturing (AIEDAM), 25(1), 93-107. Lien externe
Aissa, B., Therriault, D., & El Khakani, M. A. (2011). On-substrate growth of single-walled carbon nanotube networks by an "all-laser" processing route. Carbon, 49(8), 2795-2808. Lien externe
Aliyu, M. D. S., & Boukas, E.-K. (2011). Discrete-time mixed 2/ nonlinear filtering. International Journal of Robust and Nonlinear Control, 21(11), 1257-1282. Lien externe
Aliyu, M. D. S., & Boukas, E.-K. (2011). Extending nonlinear H2, H optimisation to W1,2 and W1, spaces - Part II: Optimal estimation and output-feedback control. New advances in H? control and filtering for nonlinear systems: International Journal of Systems Science, 42(5), 907-920. Lien externe
Aliyu, M. D. S., & Boukas, E.-K. (2011). Extending nonlinear H2, H optimisation to W1,2, W1, spaces - Part I: Optimal control. New advances in H? control and filtering for nonlinear systems: International Journal of Systems Science, 42(5), 889-906. Lien externe
Aliyu, M. D. S., & Boukas, E.-K. (2011). H2 filtering for discrete-time nonlinear singularly perturbed systems. IEEE Transactions on Circuits and Systems I: Regular Papers, 58(8), 1854-1864. Lien externe
Aliyu, M. D. S., & Boukas, E.-K. (2011). H2 filtering for non-linear singularly perturbed systems. IET Control Theory and Applications, 5(17), 2023-2032. Lien externe
Aliyu, M. D. S., & Boukas, E.-K. (2011). H∞-filtering for singularly perturbed nonlinear systems. International Journal of Robust and Nonlinear Control, 21(2), 218-236. Lien externe
Aliyu, M. D. S., & Boukas, E.-K. (2011). Kalman Filtering for Affine Nonlinear Descriptor Systems. Circuits, Systems, and Signal Processing, 30(1), 125-142. Lien externe
Aliyu, M. D. S., & Luttamaguzi, J. (2011). A note on static output-feedback for affine nonlinear systems. Asian Journal of Control, 13(2), 304-308. Lien externe
Alloui, Z., & Vasseur, P. (2011). Natural Convection Induced by a Centrifugal Force Field in a Horizontal Annular Porous Layer Saturated with a Binary Fluid. Transport in Porous Media, 88(1), 169-185. Lien externe
Alloui, Z., & Vasseur, P. (2011). Onset of Benard-Marangoni convection in a micropolar fluid. International Journal of Heat and Mass Transfer, 54(13-14), 2765-2773. Lien externe
Alloui, Z., Beji, H., & Vasseur, P. (2011). Double-diffusive and Soret-induced convection of a micropolar fluid in a vertical channel. Computers and Mathematics with Applications, 62(2), 725-736. Lien externe
Alloui, Z., Vasseur, P., & Reggio, M. (2011). Natural convection of nanofluids in a shallow cavity heated from below. International Journal of Thermal Sciences, 50(3), 385-393. Lien externe
Amini, S., Veilleux, D., & Villemure, I. (2011). Three-dimensional in situ zonal morphology of viable growth plate chondrocytes : a confocal microscopy study. Journal of Orthopaedic Research, 29(5), 710-717. Lien externe
Andolfatto, L., Lavernhe, S., & Mayer, J. R. R. (2011). Evaluation of servo, geometric and dynamic error sources on five-axis high-speed machine tool. International Journal of Machine Tools and Manufacture, 51(10-11), 787-796. Lien externe
Andolfatto, L., Mayer, J. R. R., & Lavernhe, S. (2011). Adaptive Monte Carlo applied to uncertainty estimation in five axis machine tool link errors identification with thermal disturbance. International Journal of Machine Tools and Manufacture, 51(7-8), 618-627. Lien externe
Andre, C., Vasilevskiy, D., Turenne, S., & Masut, R. A. (2011). Increase in the density of states in n-type extruded (Bi₍₁₋ₓ₎Sbₓ)₂(Te₍₁₋y₎Sey)₃ thermoelectric alloys. Journal of Physics D: Applied Physics, 44(23), 235401-235401. Lien externe
Arjmand, N., Plamondon, A., Shirazi-Adl, A., Larivière, C., & Parnianpour, M. (2011). Predictive equations to estimate spinal loads in symmetric lifting tasks. Journal of Biomechanics, 44(1), 84-91. Lien externe
Assa, B., Nechache, R., Therriault, D., Rosei, F., & Nedil, M. (2011). High-frequency electromagnetic properties of epitaxial Bi 2FeCrO6 thin films grown by pulsed laser deposition. Applied Physics Letters, 99(18). Lien externe
Aubin, C.-É., Bellefleur, C., Joncas, J., De Lanauze, D., Kadoury, S., Blanke, K., Parent, S., & Labelle, H. (2011). Reliability and Accuracy Analysis of a New Semiautomatic Radiographic Measurement Software in Adult Scoliosis. Spine, 36(12), E780-E790. Lien externe
Baïlon-Poujol, I., Bailon, J.-P., & L'Espérance, G. (2011). Ball-mill grinding kinetics of master alloys for steel powder metallurgy applications. Powder Technology, 210(3), 267-272. Lien externe
Baron, L., Balazinski, M., & Ren, Q. (2011). Type2 TSK Fuzzy Logic System and its Type1 Counterpart. International Journal of Computer Applications, 20(6), 8-13. Lien externe
Bazrgari, B., Nussbaum, M. A., Madigan, M. L., & Shirazi-Adl, A. (2011). Soft tissue wobbling affects trunk dynamic response in sudden perturbations. Journal of Biomechanics, 44(3), 547-551. Lien externe
Bejjani, R., Balazinski, M., Shi, B., Attia, H., & Kishawy, H. (2011). Machinability and chip formation of titanium metal matrix composites. International Journal of Advanced Manufacturing Systems, 13(1), 81-96. Non disponible
Bejjani, R., Shi, B., Attia, H., & Balazinski, M. (2011). Laser assisted turning of Titanium Metal Matrix Composite. CIRP Annals - Manufacturing Technology, 60(1), 61-64. Lien externe
Bensadoun, F., Kchit, N., Billotte, C., Bickerton, S., Trochu, F., & Ruiz, E. (2011). A Study of Nanoclay Reinforcement of Biocomposites Made by Liquid Composite Molding. International Journal of Polymer Science, 2011, 1-10. Disponible
Bensadoun, F., Kchit, N., Billotte, C., Trochu, F., & Ruiz, E. (2011). A Comparative Study of Dispersion Techniques for Nanocomposite Made with Nanoclays and an Unsaturated Polyester Resin. Journal of Nanomaterials, 2011, 406087. Disponible
Bernier, F., Beaulieu, P., Bailon, J.-P., & L'Espérance, G. (2011). Effect of Cu infiltration on static and dynamic properties of PM steels. Powder Metallurgy, 54(3), 314-319. Lien externe
Bernier, F., Plamondon, P., Bailon, J.-P., & L'Espérance, G. (2011). Microstructural characterisation of nickel rich areas and their influence on endurance limit of sintered steel. Powder Metallurgy, 54(5), 559-565. Lien externe
Birglen, L. (2011). The kinematic preshaping of triggered self-adaptive linkage-driven robotic fingers. Mechanical Sciences, 2(1), 41-49. Disponible
Blanchet, G., Delfour, M. C., & Garon, A. (2011). Quadratic models to fit experimental data of paclitaxel release kinetics from biodegradable polymers. SIAM Journal on Applied Mathematics, 71(6), 2269-2286. Lien externe
Braulio, M. A. L., Rigaud, M., Buhr, A., Parr, C., & Pandolfelli, V. C. (2011). Spinel-containing alumina-based refractory castables. Ceramics International, 37(6), 1705-1724. Lien externe
Caouette, C., Yahia, L., & Bureau, M. N. (2011). Reduced stress shielding with limited micromotions using a carbon fibre composite biomimetic hip stem: A finite element model. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 225(9), 907-919. Lien externe
Castro, L., Urquiza, G., Adamkowski, A., & Reggio, M. (2011). Experimental and numerical simulations predictions comparison of power and efficiency in hydraulic turbine. Modelling and Simulation in Engineering, 2011, 1-8. Disponible
Cauret, O., & Kummert, M. (2011). Potential of solar assisted ground source heat pumps with unglazed solar collectors for French office buildings. REHVA European HVAC Journal, 48(4), 16-21. Non disponible
Causse, P., Ruiz, E., & Trochu, F. (2011). Experimental study of flexible injection to manufacture parts of strong curvature. Polymer Composites, 32(6), 892-895. Lien externe
Clin, J., Aubin, C.-É., Lalonde, N., Parent, S., & Labelle, H. (2011). A new method to include the gravitational forces in a finite element model of the scoliotic spine. Medical and Biological Engineering and Computing, 49(8), 967-977. Lien externe
Clin, J., Aubin, C.-É., Parent, S., & Labelle, H. (2011). Biomechanical modeling of brace treatment of scoliosis: effects of gravitational loads. Medical and Biological Engineering and Computing, 49(7), 743-753. Lien externe
Dimitrievska, S., Maire, M., Diaz-Quijada, G. A., Robitaille, L., Ajji, A., Yahia, L., Moreno, M., Merhi, Y., & Bureau, M. (2011). Low Thrombogenicity Coating of Nonwoven PET Fiber Structures for Vascular Grafts. Macromolecular Bioscience, 11(4), 493-502. Lien externe
Dimitrievska, S., Petit, A., Doillon, C. J., Epure, L., Ajji, A., Yahia, L., & Bureau, M. (2011). Effect of Sterilization on Non-woven Polyethylene Terephthalate Fiber Structures for Vascular Grafts. Macromolecular Bioscience, 11(1), 13-21. Lien externe
Driscoll, C., Aubin, C.-É., Labelle, H., & Dansereau, J. (2011). Assessment of two novel surgical positions for the reduction of scoliotic deformities: lateral leg displacement and hip torsion. European Spine Journal, 20(10), 1711-1719. Lien externe
Driscoll, M., Aubin, C.-É., Moreau, A., & Parent, S. (2011). Biomechanical comparison of fusionless growth modulation corrective techniques in pediatric scoliosis. Medical and Biological Engineering and Computing, 49(12), 1437-1445. Lien externe
El Hassan, M., Meslem, A., & Abed-Meraim, K. (2011). Experimental investigation of the flow in the near-field of a cross-shaped orifice jet. Physics of Fluids, 23(4). Lien externe
Erkan, T., Mayer, J. R. R., & Dupont, Y. (2011). Volumetric distortion assessment of a five-axis machine by probing a 3D reconfigurable uncalibrated master ball artefact. Precision Engineering, 35(1), 116-125. Lien externe
Erkan, T., Mayer, J. R. R., & Wozniak, A. (2011). Surface probing simulator for the evaluation of CMM probe radius correction software. International Journal of Advanced Manufacturing Technology, 55(1-4), 307-315. Lien externe
Eslami Nejad, P., & Bernier, M. (2011). Coupling of geothermal heat pumps with thermal solar collectors using double U-tube boreholes with two independent circuits. Applied Thermal Engineering, 31(14-15), 3066-3077. Lien externe
Eslami Nejad, P., & Bernier, M. (2011). Heat Transfer in Double U-Tube Boreholes With Two Independent Circuits. Journal of Heat Transfer, 133(8). Lien externe
Farahani, R. D., Dalir, H., Aïssa, B., El Khakani, M. A., Lévesque, M., & Therriault, D. (2011). Micro-infiltration of three-dimensional porous networks with carbon nanotube-based nanocomposite for material design. Composites Part A: Applied Science and Manufacturing, 42(12), 1910-1919. Disponible
Gagnon, D., Arjmand, N., Plamondon, A., Shirazi-Adl, A., & Larivière, C. (2011). An improved multi-joint EMG-assisted optimization approach to estimate joint and muscle forces in a musculoskeletal model of the lumbar spine. Journal of Biomechanics, 44(8), 1521-1529. Lien externe
Galbusera, F., Schmidt, H., Noailly, J., Malandrino, A., Lacroix, D., Wilke, H.-J., & Shirazi-Adl, A. (2011). Comparison of four methods to simulate swelling in poroelastic finite element models of intervertebral discs. Journal of the Mechanical Behavior of Biomedical Materials, 4(7), 1234-1241. Lien externe
Gao, Y., Étienne, S., Yu, D., Wang, X., & Tan, S. (2011). Bi-stable flow around tandem cylinders of different diameters at low Reynolds number. Fluid Dynamics Research, 43(5). Lien externe
Gariepy, A., Larose, S., Perron, C., & Lévesque, M. (2011). Shot peening and peen forming finite element modelling-towards a quantitative method. International Journal of Solids and Structures, 48(20), 2859-2877. Lien externe
Gariepy, M., Trépanier, J.-Y., & Masson, C. (2011). Convergence criterion for a far-field drag prediction and decomposition method. AIAA Journal, 49(12), 2814-2818. Lien externe
Garo, A., Arnoux, P. J., Wagnac, E., & Aubin, C.-É. (2011). Calibration of the mechanical properties in a finite element model of a lumbar vertebra under dynamic compression up to failure. Medical and Biological Engineering and Computing, 49(12), 1371-1379. Lien externe
Geitmann, A., Fayant, P., Girlanda, O., Chebli, Y., Villemure, I., & Aubin, C.-É. (2011). Finite Element Modeling of Polar Growth in Walled Cells. Biophysical Journal, 100(3), 190-190. Lien externe
Gemme, F., Verreman, Y., Dubourg, L., & Wanjara, P. (2011). Effect of welding parameters on microstructure and mechanical properties of AA7075-T6 friction stir welded joints. Fatigue and Fracture of Engineering Materials and Structures, 34(11), 877-886. Lien externe
Givi, M., Fadaei Tehrani, A., & Mohammadi, A. (2011). Polishing of the aluminum sheets with magnetic abrasive finishing method. International Journal of Advanced Manufacturing Technology, 61(9-12), 1-10. Lien externe
Gosselin, F., Lalande, V., & Martel, S. (2011). Characterization of the deflections of a catheter steered using a magnetic resonance imaging system. Medical Physics, 38(9), 4994-5002. Lien externe
Grunhagen, T., Shirazi-Adl, A., Fairbank, J. C. T., & Urban, J. P. G. (2011). Intervertebral disk nutrition : a review of factors influencing concentrations of nutrients and metabolites. Orthopaedic clinics of North America, 42(4), 465-477. Lien externe
Guiassa, R., & Mayer, J. R. R. (2011). Predictive compliance based model for compensation in multi-pass milling by on-machine probing. CIRP Annals - Manufacturing Technology, 60(1), 391-394. Lien externe
Guiet, J., Reggio, M., & Teyssedou, A. (2011). Implementation and application of the lattice Boltzmann method using Matlab. Engineering Applications of Computational Fluid Mechanics, 5(1), 117-126. Lien externe
Guiet, J., Reggio, M., & Vasseur, P. (2011). Natural convection of nanofluids in heated enclosures using the lattice Boltzmann method. Computational Thermal Sciences, 3(4), 301-316. Lien externe
Habib, M., El Khakani, M., Aïssa, B., Denidni, T., Laberge Lebel, L., & Therriault, D. (2011). Super-high-frequency shielding properties of excimer-laser-synthesized-single-wall-carbon-nanotubes/polyurethane nanocomposite films. Journal of Applied Physics, 109(8). Lien externe
Hadj Henni, A., Schmitt, C., Tremblay, M.-E., Hamdine, M., Heuzey, M.-C., Carreau, P., & Cloutier, G. (2011). Hyper-frequency viscoelastic spectroscopy of biomaterials. Journal of the Mechanical Behavior of Biomedical Materials, 4(7), 1115-1122. Lien externe
Hadjizadeh, A., Ajji, A., & Bureau, M. (2011). Nano/micro electro-spun polyethylene terephthalate fibrous mat preparation and characterization. Journal of the Mechanical Behavior of Biomedical Materials, 4(3), 340-351. Lien externe
Huo, L., & Baron, L. (2011). The self-adaptation of weights for joint-limits and singularity avoidances of functionally redundant robotic-task. Robotics and Computer-Integrated Manufacturing, 27(2), 367-76. Lien externe
Khan, K. A., Barello, R., Muliana, A. H., & Lévesque, M. (2011). Coupled heat conduction and thermal stress analyses in particulate composites. Mechanics of Materials, 43(10), 608-625. Lien externe
Kim, E.-J., Roux, J.-J., Bernier, M., & Cauret, O. (2011). Three-dimensional numerical modeling of vertical ground heat exchangers : Domain decomposition and state model reduction. International journal of heating, ventilating, air-conditioning, and refrigeration research, 17(6), 912-927. Lien externe
Kishawy, H. A., Pang, L., & Balazinski, M. (2011). Modeling of tool wear during hard turning with self-propelled rotary tools. International Journal of Mechanical Sciences, 53(11), 1015-1021. Lien externe
Labelle, H., Aubin, C.-É., Lenke, L., Newton, P., Stokes, I., Jackson, R., & Parent, S. (2011). Seeing the spine in 3D : how will it change what we do? Journal of Pediatric Orthopaedics, 31(1), S37-S45. Lien externe
Lakis, A. A., Toorani, M. H., Kerboua, Y., Esmailzadeh, M., & Sabri, F. (2011). Theory, analysis and design of fluid-shell structures. Structural Longevity, 6(3), 155-185. Lien externe
Lanoue, F., Vadean, A., & Sanschagrin, B. (2011). Fretting fatigue strength reduction factor for interference fits. Simulation Modelling Practice and Theory, 19(9), 1811-1823. Lien externe
Leclaire, S., Reggio, M., & Trépanier, J.-Y. (2011). Isotropic color gradient for simulating very high-density ratios with a two-phase flow lattice Boltzmann model. Computers and Fluids, 48(1), 98-112. Lien externe
Lemire, S., & Vo, H. D. (2011). Reduction of Fan and Compressor Wake Defect Using Plasma Actuation for Tonal Noise Reduction. Journal of Turbomachinery, 133(1), 011017-011017. Lien externe
Ma, S., & Boukas, E.-K. (2011). Guaranteed cost control of uncertain discrete-time singular Markov jump systems with indefinite quadratic cost. International Journal of Robust and Nonlinear Control, 21(9), 1031-1045. Lien externe
Mahvash, A., & Lakis, A. A. (2011). A novel approach to evaluation of vibration source separation based on spatial distribution of sensors and Fourier transforms. Journal of Dynamic Systems, Measurement and Control, 133(6), 9 pages. Lien externe
Mascle, C., Balazinski, M., & Ben Mhenni, A. (2011). Effect of roughness and interference on torque capacity of a shrink fitted tool holder. International Journal of Advanced Manufacturing Systems, 13(1), 149-165. Non disponible
Massicotte, R., Ginestet, P., Yahia, L., Pichette, G., & Mafu, A. A. (2011). Comparative study from a chemical perspective of two- and three-step disinfection techniques to control Clostridium difficile spores. International Journal of Infection Control, 7(4), 8 pages. Disponible
Miao, H. Y., Larose, S., Perron, C., & Lévesque, M. (2011). Numerical simulation of the stress peen forming process and experimental validation. Advances in Engineering Software, 42(11), 963-975. Lien externe
Michel, L., Vadean, A., & Benoit, R. (2011). Tire burst phenomenon and rupture of a typical truck tire bead design. Tire Science and Technology, 39(4), 270-283. Lien externe
Moatari Kazerouni, A., Achiche, S., Hisarciklilar, O., & Thomson, V. (2011). Appraisal of new product development success indicators in the aerospace industry. Journal of Mechanical Design, 133(10). Lien externe
Moreno, M. J., Ajji, A., Mohebbi-Kalhori, D., Rukhlova, M., Hadjizadeh, A., & Bureau, M. (2011). Development of a compliant and cytocompatible micro-fibrous polyethylene terephthalate vascular scaffold. Journal of Biomedical Materials Research. Part B, Applied Biomaterials, 97 B(2), 201-214. Lien externe
Mortada, M.-A., Yacout, S., & Lakis, A. A. (2011). Diagnosis of rotor bearings using logical analysis of data. Journal of Quality in Maintenance Engineering, 17(4), 371-397. Lien externe
Murphy, G. B., Kummert, M., Anderson, B. R., & Counsell, J. (2011). A comparison of the UK Standard Assessment Procedure and detailed simulation of solar energy systems for dwellings. Journal of Building Performance Simulation, 4(1), 75-90. Lien externe
Nafi, A., Mayer, J. R. R., & Wozniak, A. (2011). Novel CMM-based implementation of the multi-step method for the separation of machine and probe errors. Precision Engineering, 35(2), 318-328. Lien externe
Petrissans, A., Younsi, R., Chaouch, M., Gerardin, P., & Petrissans, M. (2011). Experimental and numerical analysis of wood thermodegradation - Mass loss kinetics. Journal of Thermal Analysis and Calorimetry, 109(2), 1-8. Lien externe
Pettigrew, M. J., Rogers, R. J., & Axisa, F. (2011). Damping of heat exchanger tubes in liquids: review and design guidelines. Journal of Pressure Vessel Technology, 133(1), 014002-014002. Lien externe
Phan, P., Mezghani, N., Aubin, C.-É., de Guise, J., & Labelle, H. (2011). Computer algorithms and applications used to assist the evaluation and treatment of adolescent idiopathic scoliosis. European Spine Journal, 20(7), 1058-1068. Lien externe
Philippe, M., Bernier, M., Marchio, D., & Lopez, S. (2011). A semi-analytical model for serpentine horizontal ground heat exchangers. International journal of heating, ventilating, air-conditioning, and refrigeration research, 17(6), 1044-1058. Lien externe
Pouponneau, P., Savadogo, O., Napporn, T., Yahia, L., & Martel, S. (2011). Corrosion study of single crystal Ni-Mn-Ga alloy and Tb₀.₂₇Dy₀.₇₃Fe₁.₉₅ alloy for the design of new medical microdevices. Journal of Materials Science: Materials in Medicine, 22(2), 237-245. Lien externe
Recuerda, M., Cote, S.-P., Villemure, I., & Périé-Curnier, D. (2011). Influence of experimental protocols on the mechanical properties of the intervertebral disc in unconfined compression. Journal of Biomechanical Engineering, 133(7), 071006-071006. Lien externe
Ren, Q., Balazinski, M., Baron, L., & Jemielniak, K. (2011). TSK fuzzy modeling for tool wear condition in turning processes: An experimental study. Engineering Applications of Artificial Intelligence, 24(2), 260-265. Lien externe
Ren, Q., Baron, L., & Balazinski, M. (2011). Type-2 fuzzy modeling for acoustic emission signal in precision manufacturing. Modelling and Simulation in Engineering, 2011, 1-12. Disponible
Ricciardi, G., Pettigrew, M. J., & Mureithi, N. W. (2011). Fluidelastic instability in a normal triangular tube bundle subjected to air-water cross-flow. Journal of Pressure Vessel Technology, 133(6). Lien externe
Sabri, F., & Lakis, A. A. (2011). Effects of sloshing on flutter prediction of partially liquid-filled circular cylindrical shell. Journal of Aircraft, 48(6), 1829-1839. Lien externe
Sabri, F., & Lakis, A. A. (2011). Hydroelastic vibration of partially liquid-filled circular cylindrical shells under combined internal pressure and axial compression. Aerospace Science and Technology, 15(4), 237-248. Lien externe
Saeed, F., Paraschivoiu, I., Trifu, O., Hess, M., & Gabrys, C. (2011). Inverse airfoil design method for low-speed straight-bladed Darrieus-type VAWT applications. Wind Engineering, 35(3), 357-368. Lien externe
Schmidt, H., Galbusera, F., Wilke, H.-J., & Shirazi-Adl, A. (2011). Remedy for fictive negative pressures in biphasic finite element models of the intervertebral disc during unloading. Computer Methods in Biomechanics and Biomedical Engineering, 14(3), 293-303. Lien externe
Séoud, L., Cheriet, F., Labelle, H., & Dansereau, J. (2011). A novel method for the 3-D reconstruction of scoliotic ribs from frontal and lateral radiographs. IEEE Transactions on Biomedical Engineering, 58(5), 1135-1146. Lien externe
Sergerie, K., Parent, S., Beauchemin, P. F., Londono, I., Moldovan, F., & Villemure, I. (2011). Growth plate explants respond differently to in vitro static and dynamic loadings. Journal of Orthopaedic Research, 29(4), 473-480. Lien externe
Shi, L., Wang, D., Driscoll, M., Villemure, I., Chu, W. C., Cheng, J. C., & Aubin, C.-É. (2011). Biomechanical analysis and modeling of different vertebral growth patterns in adolescent idiopathic scoliosis and healthy subjects. Scoliosis, 6(1), 11. Disponible
Slamani, M., Mayer, J. R. R., & Cloutier, G. (2011). Modeling and experimental validation of machine tool motion errors using degree optimized polynomial including motion hysteresis. Experimental Techniques, 35(1), 37-44. Lien externe
Spitler, J., & Bernier, M. (2011). Ground-source heat pump systems : the first century and beyond. International journal of heating, ventilating, air-conditioning, and refrigeration research, 17(6), 891-894. Lien externe
Stoeffler, K., Lafleur, P., Perrin-Sarazin, F., Bureau, M., & Denault, J. (2011). Micro-mechanisms of deformation in polyethylene/clay micro- and nanocomposites. Composites Part A: Applied Science and Manufacturing, 42(8), 916-927. Lien externe
Sy, M., & Mascle, C. (2011). Product design analysis based on life cycle features. Journal of Engineering Design, 22(6), 387-406. Lien externe
Tam, S. K., Bilodeau, S., Dusseault, J., Langlois, G., Halle, J.-P., & Yahia, L. (2011). Biocompatibility and physicochemical characteristics of alginate-polycation microcapsules. Acta Biomaterialia, 7(4), 1683-92. Lien externe
Tam, S. K., Dusseault, J., Bilodeau, S., Langlois, G., Halle, J.-P., & Yahia, L. (2011). Factors influencing alginate gel biocompatibility. Journal of Biomedical Materials Research. Part A, 98 A(1), 40-52. Lien externe
Thomassin, J., Vo, H. D., & Mureithi, N. W. (2011). The tip clearance flow resonance behind axial compressor nonsynchronous vibration. Journal of Turbomachinery, 133(4). Lien externe
Trépanier, J.-Y., Melot, M., Camarero, R., & Petro, E. (2011). Comparison of two models for radiative heat transfer in high temperature thermal plasmas. Modelling and Simulation in Engineering, 2011, 1-7. Lien externe
Valteau, B., Grimard, G., Londono, I., Moldovan, F., & Villemure, I. (2011). In vivo dynamic bone growth modulation is less detrimental but as effective as static growth. Bone, 49(5), 996-1004. Lien externe
Vasilevskiy, D., Bourbia, O., Gosselin, S., Turenne, S., & Masut, R. A. (2011). Nanostructure characterization of bismuth telluride-based powders and extruded alloys by various experimental methods. Journal of Electronic Materials, 40(5), 1046-1051. Lien externe
Versailles, P., Ghosh, S., Vo, H. D., & Masson, C. (2011). Preliminary assessment of wind turbine blade lift control via plasma actuation. Wind Engineering, 35(3), 339-356. Lien externe
Vétel, J., Garon, A., & Pelletier, D. (2011). Denoising methods for time-resolved PIV measurements. Experiments in Fluids, 51(4), 893-916. Lien externe
Villalpando, F., Reggio, M., & Ilinca, A. (2011). Assessment of turbulence models for flow simulation around a wind turbine airfoil. Modelling and Simulation in Engineering, 2011, 1-8. Disponible
Vu, V. H., Thomas, M., Lakis, A. A., & Marcouiller, L. (2011). Operational modal analysis by updating autoregressive model. Mechanical Systems and Signal Processing, 25(3), 1028-1044. Lien externe
Wagnac, E., Arnoux, P.-J., Garo, A., El-Rich, M., & Aubin, C.-É. (2011). Calibration of hyperelastic material properties of the human lumbar intervertebral disc under fast dynamic compressive loads. Journal of Biomechanical Engineering, 133(10), 101007-101007. Lien externe
Wang, X., Aubin, C.-É., Crandall, D., & Labelle, H. (2011). Biomechanical comparison of force levels in spinal instrumentation using monoaxial versus multi degree of freedom post-loading pedicle screws. Spine, 36(2), E95-E104. Lien externe
Wang, X., Aubin, C.-É., Crandall, D., & Labelle, H. (2011). Biomechanical modeling and analysis of a direct incremental segmental translation system for the instrumentation of scoliotic deformities. Clinical Biomechanics, 26(6), 548-555. Lien externe
Zeinali-Davarani, S., Shirazi-Adl, A., Dariush, B., Hemami, H., & Parnianpour, M. (2011). The effect of resistance level and stability demands on recruitment patterns and internal loading of spine in dynamic flexion and extension using a simple trunk model. Computer Methods in Biomechanics and Biomedical Engineering, 14(7), 645-656. Lien externe
Zhang, L., Boukas, E.-K., Shi, P., & Chen, Z. (2011). A -dependent approach to H control of uncertain switched linear systems with average dwell time. Optimal Control Applications and Methods, 32(1), 15-27. Lien externe
Zhang, X., Baron, L., Liu, Q., & Boukas, E.-K. (2011). Design of stabilizing controllers with a dynamic gain for feedforward nonlinear time-delay systems. IEEE Transactions on Automatic Control, 56(3), 692-697. Lien externe
Zhang, X., Clime, L., Roberge, H., Normandin, F., Yahia, L., Sacher, E., & Veres, T. (2011). PH-triggered doxorubicin delivery based on hollow nanoporous silica nanoparticles with free-standing superparamagnetic Fe3O4 cores. Journal of Physical Chemistry C, 115(5), 1436-1443. Lien externe
Zhang, X., Liu, Q., Baron, L., & Boukas, E.-K. (2011). Feedback stabilization for high order feedforward nonlinear time-delay systems. Automatica, 47(5), 962-967. Lien externe
Zineddine, A., & Vasseur, P. (2011). Natural convection in a horizontal annular porous cavity saturated by a binary mixture. Lien externe
Aubin, C.-É., Wang, X., Crandall, D., & Labelle, H. (2011). Biomechanical Comparison of Pedicle Screw Instrumentation Systems for 3D Correction of Adolescent Idiopathic Scoliosis. (Rapport technique n° MD006498-1.0/1111). Non disponible
Bui-Quoc, T., Julien, D., & Lévesque, M. (2011). Étude du comportement en fatigue propagation de l'acier A-514 a l'air ambiant. (Rapport technique). Non disponible
Abedrabbo, G., Fisette, P., Mousny, M., Mahaudens, P., Detrembleur, C., Samin, J. C., Aubin, C.-É., & Raison, M. (juillet 2011). Dynamic analysis of intervertebral efforts in scoliosis: a multibody modeling approach [Communication écrite]. ECCOMAS Multibody Dynamics Conference, Bruxelles, Belgique. Non disponible
Aïssa, B., Haddad, E., Tagziria, K., Jamroz, W., Asgar-Khan, M., Hoa, S. V., Verreault, J., Higgins, A., & Therriault, D. (septembre 2011). Exploring self healing of CFRP laminates exposed to hypervelocity small pellets simulating space debris [Communication écrite]. 2nd Joint US-Canada Conference on Composites - American Society for Composites, 26th Annual Technical Conference: Canadian Association for Composite Structures and Materials, Montréal, QC, Canada. Lien externe
Aïssa, B., Therriault, D., Farahani, R. D., & Merle, P. (novembre 2011). Fabrication of three-dimensional microvascular single-walled carbon nanotubes/5-ethylidene-2-norbornene nanocomposite beams by infiltration [Communication écrite]. MRS Fall Meeting 2011, Boston, MA, USA. Non disponible
Allard, Y., Kummert, M., Bernier, M., & Moreau, A. (novembre 2011). Intermodel comparison and experimental validation of electrical water heater models in TRNSYS [Communication écrite]. Building Simulation 2011: 12th International Building Performance Simulation Association Conference, Sydney, Australia. Lien externe
Amini, S., Mortazavi, F., Sun, J., Lévesque, M., Hoemann, C. D., & Villemure, I. (mai 2011). The biomechanical behavior of the growth plate under compression is related to its collagen content and organization [Communication écrite]. 17th Annual Canadian Connective Tissue Conference, Montréal, Québec. Non disponible
Andersen, C. L., Gudmundsson, H. P., Achiche, S., & Boelskifte, P. (août 2011). Challenges and limitations of applying an emotion-driven design approach on elderly users [Communication écrite]. 18th International Conference on Engineering Design (ICED 2011), Copenhagen, Denmark. Lien externe
Appio, F. P., Achiche, S., Di Minin, A., & McAloone, T. (janvier 2011). Assessment of tools input requirements and output potential in the core front end of NPD [Communication écrite]. 18th IPDM Conference (IPDM 2011), Delft, Netherlands. Non disponible
Appio, F. P., Achiche, S., Di Minin, A., & McAloone, T. (août 2011). Understanding managers decision making process for tools selection in the core front eng of innovation [Communication écrite]. 18th International Conference on Engineering Design (ICED 2011), Copenhagen, Denmark. Lien externe
Arabi, S., Camarero, R., & Guibault, F. (juillet 2011). Moving grids by unstructured computation domain mesh mapping [Communication écrite]. 11th US National Congress on Computational Mechanics, Mineapolis, MN, USA. Non disponible
Aramesh, M., Balazinski, M., Attia, H., Kishawy, H., & Bejjani, R. (septembre 2011). A study on phase transformation and particle distribution during machining titanium metal matrix composites [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, QC, Canada. Lien externe
Arjmand, N., Plamondon, A., Shirazi-Adl, A., Larivière, C., & Parnianpour, M. (juillet 2011). Predictive equations for spinal loads in symmetric lifting using a complex biomechanical model [Communication écrite]. ISB 2011. 23rd Congress of the International Society of Biomechanics, Brussels, Belgium. Non disponible
Arjmand, N., Plamondon, A., Shirazi-Adl, A., Larivière, C., & Parnianpour, M. (janvier 2011). Predictive equations for spinal loads in symmetric lifting using a complex biomechanical model [Communication écrite]. 57th Annual Meeting of the Orthopaedic Research Society, Long Beach, California. Lien externe
Aubin, C.-É., Villemure, I., Wakula, Y., Driscoll, M., & Parent, P. (juillet 2011). Characterization of in vivo vertebral growth modulation by shape memory alloy staples in a porcine model [Communication écrite]. 18th International Meeting on Advanced Spine Techniques, IMAST, Copenhagen, Denmark. Non disponible
Beaudette, K., Strupler, M., Benboujja, F., Parent, S., Aubin, C.-É., & Boudoux, C. (octobre 2011). Tomographie par cohérence optique pour l'identification de structures musculo-squelettiques du rachis [Communication écrite]. 41e réunion annuelle de la Société de Scoliose du Québec, Québec, Canada. Non disponible
Beaudette, K., Strupler, M., Driscoll, M., Parent, S., Maciejko, R., Aubin, C.-É., & Boudoux, C. (janvier 2011). Optical coherence tomography as a guiding tool for minimally invasive surgeries of the spine [Communication écrite]. SPIE Photonics West 2011, San Francisco, Canada. Non disponible
Beausoleil-Morrison, I., Macdonald, F., Kummert, M., Mcdowell, T., Jost, R., & Ferguson, A. (novembre 2011). The design of an ESP-r and TRNSYS co-simulator [Communication écrite]. Building Simulation 2011 : 12th Conference of International Building Performance Simulation Association, Sydney, Australie. Lien externe
Bejjani, R., Aramesh, M., Balazinski, M., Kishawy, H., & Attia, H. (juin 2011). Chip morphology study of titanium metal matrix composites [Communication écrite]. 23rd Canadian Congress of Applied Mechanics, Vancouver, Canada. Lien externe
Bejjani, R., Balazinski, M., Attia, H., Aramesh, M., & Kishawy, H. (septembre 2011). Segmentation and shear localization when turning titanium metal matrix composites [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, QC, Canada. Lien externe
Bensadoun, F., Billotte, C., Kchit, N., Bickerton, S., Trochu, F., & Ruiz, E. (septembre 2011). Development, characterization and manufacturing of nanocomposites and bionanocomposites for transportation industry [Communication écrite]. 2nd Joint US-Canada Conference on Composites and 26th ASC Annual Technical Conference, Montréal, Québec. Non disponible
Bilotte, C., Morin, B. F., Cara, F., Baurier, H., & Ruiz, E. (septembre 2011). Chemical shrinkage and thermomechanical characterization of an expoxy resin during cure by a novel in situ measurement method [Communication écrite]. 2nd Joint US-Canada Conference on Composites and 26th ASC Annual Technical Conference, Montréal, Québec. Non disponible
Bruneau, A., Laitenberger, M., & Raison, M. (juillet 2011). Dynamical analysis of the upper members: towards a model refinement and the development of a rehabilitation tool [Communication écrite]. ECCOMAS Multibody Dynamics Conference, Bruxelles, Belgique. Non disponible
Burlet-Vienney, D., Chinniah, Y. A., Boukas, E.-K., Pizarro-Chong, A., & El Aboudi, M. (octobre 2011). Conception d'un outil d'observation et de suivi de procédures de cadenassage en milieu industriel [Communication écrite]. 9ème Congrès internationale de génie industriel, CIGI 2011, Saint-Sauveur, Canada. Lien externe
Causse, P., Ruiz, E., & Trochu, F. (août 2011). Analysis of fiber preforming for improved manufacturing of curved parts by flexible injection [Communication écrite]. 18th International Conference on Composite Materials, Jeju Island, Korea. Lien externe
Causse, P., Ruiz, E., & Trochu, F. (septembre 2011). Fabrication of curved parts by flexible injection : influence of processing conditions on composite quality and analysis of distortion [Communication écrite]. 2nd Joint US-Canada Conference on Composites and 26th ASC Annual Technical Conference, Montréal, Québec. Non disponible
Chen, J. Q., Verreman, Y., Besson, J., Madi, Y., & Morgeneyer, T. F. (octobre 2011). Ductile fracture of AA2198 aluminium-lithium-copper alloys used in the aeronautical industry [Communication écrite]. Conférence des Métallurgistes, COM2011, Montréal, Québec. Non disponible
Cloutier, G., Savard, P., & Boudreault, Y. (juin 2011). Towards a scale and tool for the appraisal of CEAB attributes - Progress report on a field test [Communication écrite]. 2nd Annual CEEA Conference, Memorial University St. John's, Newfoundland (6 pages). Publié dans Proceedings of the ... CEEA Conference. Lien externe
Cori, J.-F., Étienne, S., & Pelletier, D. (janvier 2011). On the Determination of Propulsive Characteristics of a Flapping Airfoil with Advanced ALE Method [Communication écrite]. 49th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition, Orlando, Florida. Lien externe
Courchesne-Tardif, A., Kummert, M., Demark, S., Butler, T., Pear, D., Jones, S., Charneux, R., Genest, F., & Picard, D. (novembre 2011). Assessing community-scale energy supply scenarios using TRNSYS simulations [Communication écrite]. 12th Conference of International Building Performance Simulation Association (Building Simulation 2011), Sydney, Australie. Lien externe
Crochon, T., Li, C., & Lévesque, M. (septembre 2011). Finite-Element implementation of Schapery-type constitutive theories based on an internal variables approach [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Lien externe
Dalir, H., Farahani, R. D., Nhim, V., Samson, B., Lévesque, M., & Therriault, D. (novembre 2010). Microstructural and mechanical properties of polyester/nanoclay nanocomposites: Microstructure-mixing strategy correlation [Communication écrite]. MRS Fall Meeting, Boston, MA. Publié dans MRS Proceedings, 1312. Lien externe
Durango, S., Correa, J., Aristizabal, M., Ruiz, O., Restrepo-Giraldo, J. D., & Achiche, S. (septembre 2011). Force-displacement model of compliant mechanisms using assur sub-chains [Communication écrite]. 13th World Congress in Mechanism and Machine Science (IFToMM 2011), Guanajuato, Mexico. Non disponible
El Mourid, A., Ganesan, R., & Lévesque, M. (septembre 2011). Modeling of the linearly viscoelastic behavior of a braided composite [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Lien externe
El Mourid, A., Ganesan, R., & Lévesque, M. (juin 2011). Prédiction du comportement viscoélastique de matériaux composites textiles par une approche d'homogénéisation [Communication écrite]. 17es Journées nationales sur les composites (JNC 2011), Poitiers-Futuroscope, France. Lien externe
Étienne, S., & Pelletier, D. (juillet 2011). Tube Arrays Flow-Induced Vibrations Simulations With Ale Finite Element Method [Communication écrite]. ASME Pressure Vessels and Piping Conference (Pvp-2011), Baltimore, MD, USA. Lien externe
Farahani, R. D., El Khakani, M. A., Lévesque, M., & Therriault, D. (septembre 2011). UV-assisted directwrite fabrication of microstructures using biotin-grafted single-walled carbon nanotubes/epoxy nanocomposites : mechanical and rheological studies [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Non disponible
Farahani, R. D., Moussaddy, H., El Khakani, M. A., Lévesque, M., & Therriault, D. (septembre 2011). Ultraviolet direct-write fabrication of chemically treated single-walled carbon nanotube nanocomposite microfibers : experimental and modeling studies [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Non disponible
Fisette, P., Abedrabbo, G., Poncelet, A., Sapin, J., & Raison, M. (mars 2011). Multibody modeling and analysis in the service of biomechanics [Communication écrite]. Euromech colloquium 511, Biomechanics of Human Motion, Ponta Delgada, Açores, Portugal. Non disponible
Fotsing, R., Sola, M., Ross, A., & Ruiz, E. (juillet 2011). Lightweight damping treatment of composite sandwich beams [Communication écrite]. 18th International Congress on Sound and Vibration, Rio de Janeiro, Brazil. Non disponible
Gagnon, D., Arjmand, N., Plamondon, A., Shirazi-Adl, A., & Larivière, C. (juillet 2011). The influence of abdominal oblique modeling on predicted muscle forces and lumbar spine loads [Communication écrite]. ISB2011 Brussels, Brussels, Belgium. Lien externe
Galvan, S., Reggio, M., Guibault, F., & Gutierrez, H. (février 2011). Analisis del flujo en el modelo del aspirador de la turbina 99 : resultado de la optimizacion del perfil de velocidades en la entrada [Communication écrite]. 12. Conreso y Exposicion Lationamericana de Trubomaquinaria, Querétaro, Mexico. Non disponible
Gariépy, A., Larose, S., Perron, C., & Lévesque, M. (mai 2011). Sequence-sensitive peen forming modelling [Communication écrite]. ASME Applied Mechanics and Materials (McMat 2011), Chicago, IL, USA. Non disponible
Ghossein, E., & Lévesque, M. (septembre 2011). A fully automated tool for a comprehensive validation of analytical homogenization models [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Lien externe
Ghossein, E., & Lévesque, M. (juin 2011). Un outil complètement automatisé pour l'évaluation en profondeur des performances des modèles d'homogénéisation [Communication écrite]. 17es Journées nationales sur les composites (JNC 2011), Poitiers-Futuroscope, France. Lien externe
Giraudeau, M., Pettigrew, M. J., & Mureithi, N. W. (juillet 2011). Two-Phase Flow Excitation Forces on a Vertical U-Bend Tube [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2011), Baltimore, MD, USA. Lien externe
Gudmundsson, H. P., Andersen, C. L., Achiche, S., & Boelskifte, P. (août 2011). Emotion-driven elicitation of elderly people user needs illustrated by a walking frame case study [Communication écrite]. 18th International Conference on Engineering Design (ICED 2011), Copenhagen, Denmark. Lien externe
Gutierrez, J., Trochu, F., & Ruiz, E. (septembre 2011). Effects of high frequency vibrations on the compressibility of dry fibrous reinforcements [Communication écrite]. 2nd Joint US-Canada Conference on Composites and 26th ASC Annual Technical Conference, Montréal, Québec. Non disponible
Helpin, V., Kummert, M., & Cauret, O. (novembre 2011). Experimental and simulation study of hybrid ground-source heat pump systems with unglazed solar collectors for french office buildings [Communication écrite]. Building Simulation 2011: 12th Conference of International Building Performance Simulation Association, Sydney, Australie. Lien externe
Kang, H. S., Mureithi, N. W., & Pettigrew, M. J. (mai 2011). An experimental investigation on the narrow annular-flow-induced vibration instability of a tube [Communication écrite]. 6th Subrata Chakrabarti International Conference on Fluid Structure Interaction (Fluid Structure Interaction 2011), Orlando, FL, United states. Lien externe
Kim, E.-J., Roux, J.-J., Bernier, M., & Cauret, O. (juin 2011). Validation expérimentale d'un modèle détaillé d'échangeurs géothermiques verticaux [Communication écrite]. Xe Colloque Inter-universitaire Franco-Québécois, Chicoutimi, Québec. Non disponible
Klim, Z. H., Balazinski, M., & Komljenovic, D. (mai 2011). Probabilistic approach limitations in the analysis of safety critical systems [Communication écrite]. 24th International Congress on Condition Monitoring and Diagnostics Engineering Management, Stavanger, Norway. Lien externe
Lacroix, S., De Marcellis-Warin, N., Riopel, D., Ross, A., & Bernandini, N. (juin 2011). Facteurs d'influence des choix d'études en génie dees femmes [Communication écrite]. Colloque international HELENA Formation interdisciplinaire des ingénieurs et problème du genre (GIEE 2011), Paris, France. Lien externe
Lakis, A. A., Toorani, M. H., Kerboua, Y., Esmailzadeh, M., & Sabri, F. (avril 2011). Theory, analysis, and design of fluid-shell structures [Communication écrite]. 11th International Conference on Computational & Experimental Engineering & Sciences, Nanjing, China. Non disponible
Lebleu, J., Raison, M., Mahaudens, P., Mousny, M., & Detrembleur, C. (octobre 2011). Comparison of efforts at the lombosacral joint during gait between populations of healthy and scoliotic subjects with different severities [Communication écrite]. 41e réunion annuelle de la Société de Scoliose du Québec, Québec, Canada. Non disponible
Leclaire, S., Reggio, M., & Trépanier, J.-Y. (avril 2011). Lattice Boltzmann immiscible three-phase model [Communication écrite]. 19th Annual Conference of the CFD Society of Canada, Montréal, Québec. Non disponible
Legay, P., Boukhili, R., Hojjati, M., & Chen, J. (septembre 2011). Impact and compression behaviour of AFP manufactured carbon/epoxy composites containing gaps and overlaps [Communication écrite]. American Society for Composites 26 th Annual Technical Conference/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Non disponible
Lévesque, M., Bernier, M., & Genest, F. (juin 2011). Simulation de dalles rayonnantes couplées à des pompes à chaleur géothermiques [Communication écrite]. Xe Colloque Inter-universitaire Franco-Québécois, Chicoutimi, Québec. Non disponible
Mahjoub, M., Roy, R., & Koclas, J. (septembre 2011). Generalized perturbation therory estimates to improve CANDU6 reflectors [Communication écrite]. 2nd International Conference on Physics and Technology of Reactors and Applications, Fez Morocco. Non disponible
Mascle, C., & Gosse, J. (octobre 2011). Optimisation des stocks par la prévision des ventes [Communication écrite]. 9e Congrès international de génie industriel (CIGI 2011), St-Sauveur, Québec. Lien externe
Mascle, C., Baptiste, P., & Latremouille-Viau, J. (mai 2011). Management of airframe disassembly and dismantling for reusing, remanufacturing and recycling [Communication écrite]. International Conference on Industrial Engineering and Systems Management (IESM 2011), Metz, France. Non disponible
Ménard, A. L., Valteau, B., Grimard, G., Londono, I., & Villemure, I. (octobre 2011). Influence des paramètres de chargement dynamique sur la modulation de croissance [Communication écrite]. 41e réunion annuelle de la Société de Scoliose du Québec, Québec, Canada. Non disponible
Miao, H. Y., & Lévesque, M. (septembre 2011). Effect of shot peening on the fatigue life and crack propagation prediction with experiments and Navarro-Rios Model [Communication écrite]. 11th International Conference of Shot Peening (ICSP 2011), South Bend, Indiana, USA. Lien externe
Miao, H. Y., & Lévesque, M. (avril 2011). Experimental study and numerical simulation of the stress peen forming process [Communication écrite]. 58th CASI Aeronautics Conference (AERO 2011), Montréal, Québec. Non disponible
Miao, H. Y., & Lévesque, M. (août 2011). Experimental study of shot peening and stress peen forming [Communication écrite]. EPS Montréal International Conference on Advanced Materials and Processing 2011, Montréal, Québec. Non disponible
Miao, H. Y., & Lévesque, M. (avril 2011). Numerical models for the optimization of the fatigue life improvement by the shot peening process [Communication écrite]. 58th CASI Aeronautics Conference (AERO 2011), Montréal, Québec. Non disponible
Miao, H. Y., & Lévesque, M. (septembre 2011). On the potential application of a numerical optimization of fatigue life with DoE and FEM [Communication écrite]. 11th International Conference of Shot Peening (ICSP 2011), South Bend, Indiana, USA. Lien externe
Moatari Kazerouni, A., Achiche, S., Hisarciklilar, O., & Thomson, V. (août 2011). Influence of time perspective on new product development success indicators [Communication écrite]. 18th International Conference on Engineering Design (ICED 2011), Copenhagen, Denmark. Lien externe
Mortada, M. A., Yacout, S., & Lakis, A. A. (mars 2011). CBMLAD : Using logical analysis of data in condition based maintenance [Communication écrite]. International Conference on Systems Engineering and Modeling (ICSEM 2011), Shanghai, China. Non disponible
Mortazavi, F., Lévesque, M., & Villemure, I. (juin 2011). Improved spectral approach for continuous displacement measurement from digital images [Communication écrite]. SEM Annual Conference & Exposition on Experimental and Applied Mechanics, Uncasville, Connecticut. Lien externe
Mortazavi, F., Lévesque, M., & Villemure, I. (septembre 2011). On the application of a hybrid spectral approach to the image-based measurement of displacements at micro-scale in composites [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Lien externe
Motaghinasab, S., Shirazi-Adl, A., Urban, J. P. G., & Parnianpour, M. (janvier 2011). Penetration of solutes into the intervertebral disc after intravenous injection [Communication écrite]. 57th Annual Meeting of the Orthopaedic Research Society, Long Beach, California. Lien externe
Motaghinasab, S., Shirazi-Adl, A., Urban, J., Parnianpour, M., & Hoviattalab, M. (décembre 2011). Computational investigation of sulphate diffusion into the dog disc [Communication écrite]. 18th Iranian Conference of Biomedical Engineering, Tehran, Iran. Lien externe
Moussaddy, H., Farahani, R. D., El Khakani, M. A., Lévesque, M., & Therriault, D. (septembre 2011). Mechanical properties of chemically-treated carbon nanotube nanocomposite microfibers : experimental and modeling studies [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Lien externe
Moussaddy, H., Lévesque, M., & Therriault, D. (septembre 2011). Comparing finite element and analytical micromechanical modeling of randomly oriented single walled carbon nanotubes reinforced nanocomposites [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Lien externe
Moussaddy, H., Lévesque, M., & Therriault, D. (juin 2011). Évaluation des performances des modèles d'homogénéisation pour des fibres aléatoirement dispersées ayant des rapports de forme élevés [Communication écrite]. 17es Journées nationales sur les composites (JNC 2011), Poitiers-Futuroscope, France. Lien externe
Mureithi, N. W., & Masabarakiza, C. (juillet 2011). Determination of Flow Structure in a Tube Array by Particle Image Velocimetry [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2011), Baltimore, MD, USA. Lien externe
Nafi, A., & Mayer, J. R. R. (juillet 2011). Probing variance separation on coordinate measuring machines [Communication écrite]. World Congress on Engineering (WCE 2011), London, United kingdom. Lien externe
Pahlavanpour, M., Hubert, P., & Lévesque, M. (juin 2011). Modèles d'homogénéisation pour des nanocomposites à base de nanoargiles [Communication écrite]. 17es Journées nationales sur les composites (JNC 2011), Poitiers-Futuroscope, France. Lien externe
Pahlavanpour, M., Hubert, P., & Lévesque, M. (septembre 2011). Multiscale modeling of polymer-clay nanocomposites : interphase and homogenization methods [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Lien externe
Perrot, E. S., Mureithi, N. W., Pettigrew, M. J., & Ricciardi, G. (juillet 2011). Vibration Excitation Forces in a Normal Triangular Tube Bundle Subjected to Two-Phase Cross Flow [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2011), Baltimore, MD, USA. Lien externe
Petrissans, A., Chaouch, M., Gerardin, P., Petrissans, M., & Younsi, R. (juillet 2011). Kinetics modeling of wood torrefaction: Weight loss kinetics [Communication écrite]. 1st International Conference on Simulation and Modeling Methodologies, Technologies and Applications (SIMULTECH 2011), Noordwijkerhout, Netherlands. Non disponible
Rahmani, B., Villemure, I., & Lévesque, M. (septembre 2011). Elastic properties identification of planar composite materials based on finite element model updating and a hybrid optimization algorithm [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Lien externe
Raison, M., Detrembleur, C., Fisette, P., & Samin, J.-C. (juin 2023). Assessment of antagonistic muscle forces during foream flexion/extention [Communication écrite]. ECCOMAS Multibody Dynamics Conference, Warsaw, Pologne. Lien externe
Redouane, R., & Lakis, A. A. (juillet 2011). Dynamic behavior of cylindrical shells subjected to nonlinearities of fluid flow [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2011), Baltimore, Maryland. Non disponible
Remery, M., Mascle, C., & Agard, B. (octobre 2011). Une méthode d'évaluation des scénarios de fin de vie pour des produits en phase de conception préliminarie [Communication écrite]. 9e Congrès international de génie industriel (CIGI 2011), St-Sauveur, Québec. Lien externe
Ruiz, E., Billotte, C., Morin, B. F., Cara, F., & Baurier, H. (août 2011). Chemical shrinkage and thermomechanical characterization of an epoxy resin during cure by a novel in situ measurement method [Communication écrite]. 18th International Conference on Composite Materials (ICCM 2011), Jeju Island, Korea. Lien externe
Sabri, F., Meguid, S. A., Lakis, A. A., & Tan, K. (juin 2011). Aeroelastic behavior of a novel morphing wing using shape memory alloys [Communication écrite]. 15th International Forum on Aeroelasticity and Structural Dynamics (IFASD 2011), Paris, France. Non disponible
Sagol, E., Reggio, M., & Ilinca, A. (avril 2011). 3D CFD assessment of the performance characteristics of the NREL phase VI experimental wind turbine [Communication écrite]. 19th Annual Conference of the CFD Society of Canada, Montréal, Québec. Non disponible
Sawadogo, T., & Mureithi, N. W. (juillet 2011). Simulation of the Vibration of a Steam Generator Tube Subjected to Fluidelastic Forces Induced by Two-Phase Cross-Flow [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2011), Baltimore, MD, USA. Lien externe
Senez, H., & Étienne, S. (juillet 2011). Development of a Numerical Model to Represent Two-Phase Flow Configurations in a Tube Bundle [Communication écrite]. ASME Pressure Vessels and Piping Conference (Pvp-2011), Baltimore, MD, USA. Lien externe
Siles, C., Baptiste, P., & Mascle, C. (mai 2011). Decision support in the management of end-of-life aircraft/Resource planning in the industry of end-of-life aircraft? [Communication écrite]. International Conference on Industrial Engineering and Systems Management (IESM 2011), Metz, France. Non disponible
Torry-Smith, J. M.̸., Achiche, S., Mortensen, N. H., Qamar, A., Wikander, J., & During, C. (août 2011). Mechatronic Design - Still a Considerable Challenge [Communication écrite]. ASME 2011 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Washington, D.C.. Lien externe
Toussaint, K., Torriano, F., Morissette, J.-F., & Reggio, M. (juillet 2011). CFD analysis of ventilation flow for a scale model hydro-generator [Communication écrite]. ASME 2011 Power Conference, Denver, Colorado, USA. Lien externe
Trochu, F., Chatel, S., Maison - Le Poëc, S., Benoit, Y., De Luca, P., Baisch, P., Roger, D., & Guerin, P. (octobre 2011). Skills synergy leading to RTM flow simulation success story [Communication écrite]. SAE AeroTech Congress and Exhibition (AEROTECH 2011), Toulouse, France. Lien externe
Valteau, B., Grimard, G., Londono, I., Moldovan, F., & Villemure, I. (mai 2011). In vivo dynamic bone growth modulation is less detrimetnal but as effective as static growth modulation [Communication écrite]. 17th Annual Canadian Connective Tissue Conference, Montréal, Québec. Non disponible
Valteau, B., Grimard, G., Londono, I., Moldovan, F., & Villemure, I. (mai 2011). La modulation de croissance dynamique in vivo est moins dommageable pour la plaque de croissance que la modulation de croissance statique [Communication écrite]. 31e journée de la recherche de POES et de la division d'orthopédie de l'Université de Montréal, Québec, Canada. Non disponible
Wang, X., Aubin, C.-É., Labelle, H., Crandall, D., & Parent, S. (octobre 2011). Analysis of corrective forces for spinal instrumentation using three types of pedicle screws [Communication écrite]. EuroSpine 2011, Milan, Italy. Non disponible
Wang, X., Aubin, C.-É., Labelle, H., Crandall, D., & Parent, S. (octobre 2011). Biomechanical study of screw forces in spinal instrumentation for scoliosis treatment [Communication écrite]. 41e Réunion annuelle de la Société de scoliose du Québec, Québec, QC. Non disponible
Wang, X., Aubin, C.-É., Labelle, H., Crandall, D., & Stefan, P. (juillet 2011). Biomechanical Effectiveness of Three Types of Pedicle Screws for the Spinal Instrumentation of Adolescent Idiopathic Scoliosis [Communication écrite]. 18th International Meeting on Advanced Spine Techniques (IMAST 2011), Copenhagen, Denmark. Lien externe
Bensadoun, F. (2011). Développement et caractérisation d'un procédé de fabrication de composites et biocomposites à base de nanoparticules d'argile et de résine polyester insaturée destinés à l'industrie du transport. [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Biron, G. (2011). Optimisation des assemblages par interférence soumis à des sollicitations de fatigue. [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Bouchaar, M. (2011). Conception d'un montage de mircrofabrication pour les nanocomposites à base de résines thermoplastiques [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Chouinard, A. (2011). Remplacement de l'usinage chimique des tôles aéronautiques minces en aluminium par de l'usinage mécanique. [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Côté, M. (2011). Estimation d'incertitudes associées aux huit écarts de membrure d'une machine-outil [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Courchesne Tardif, A. (2011). Conception et optimisation de systèmes énergétiques hybrides pour communautés durables [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Désilets, J.-F. (2011). Développement et optimisation d'un procédé de mise en forme par injection d'une pièce complexe à épaisseur variable en matériaux composites [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Dextraze, J.-P. (2011). Étude d'un procédé de fraisage immergé applicable à une fraiseuse submersible et portable. [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Ferreira Benevides, A. (2011). Fabrication d'une pièce composite axisymétrique 3D à haut taux de fibres et à haute température par le procédé polyflex. [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Ghosh, S. (2011). Plasma Actuation for Active Control of Wind Turbine Power [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Giraudeau, M. (2011). Forces fluctuantes générées par un écoulement diphasique interne : mécanisme et modélisation. [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Jamati, F. (2011). Étude numérique d'une éolienne hybride asynchrone [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Legay, P. (2011). Étude de l'influence de défauts sur les propriétés mécaniques de matériaux composites fabriqués par le procédé de placement de fibres [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Lupien, A. (2011). Une approche 3D pour la paramétrisation de pales de turbosoufflantes transsoniques [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Manac'h, Y.-G. (2011). Conception d'une chambre de culture et de sollicitation permettant l'imagerie par résonance magnétique du disque intervertébral isolé [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Martel, A. (2011). Caractérisation d'une poudre nanométrique de MoSi2 et étude du procédé de moulage par injection de poudres [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Mehdi Zadeh, F. (2011). Amélioration de la condition frontière de face de soufflante pour la conception de l'admission d'air sous distorsion [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Noriega, H. N. (2011). Convection naturelle de nanofluides par la méthode de Boltzmann sur réseau. [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Paquette, S. (2011). Vérification du logiciel CFX pour la simulation de l'interaction arc-écoulement dans les disjoncteurs haute-tension. [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Perrot, E. (2011). Forces d'excitation vibratoire dans un faisceau de tubes en configuration triangulaire normale soumis à un écoulement diphasique. [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Remery, M. (2011). Nouvelle méthode d'évaluation des scénarios de fin de vie pour des produits en phase de conception préliminaire. [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Sola, M. (2011). Caractérisation de matériaux composites à structure sandwich comportant des modifications. [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Toussaint, K. (2011). Caractérisation de l'écoulement d'air dans une maquette d'alternateur hydroélectrique par méthodes numérique et expérimentale [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Turcan, G. O. (2011). Sensibilité des métaux ferreux à l'effet d'entaille en fatigue [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Akrout, K. (2011). Parcours continus isotropes et surfaces isotropes de manipulateurs sériels [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Aliyu, M. D. S. (2011). H₂ and H∞ Filtering for Nonlinear Singular Systems [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Causse, P. (2011). Développement et analyse du procédé d'injection flexible pour la mise en forme de pièces composites fortement courbées [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Charlot, L. (2011). Calcul et analyse de sensibilité des écoulements à surface libre [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Chokri, A. (2011). Target Allocation under Uncertainty during the Vehicle Development Process [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Cori, J.-F. (2011). Analyse et caractérisation d'interactions fluide-structure instationnaires en grands déplacements [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Dermanaki Farahani, R. (2011). Three-Dimensional Microstructures of Epoxy-Carbon Nanotube Nanocomposites [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Eslami Nejad, P. (2011). Double U-Tube Geothermal Borehole Operation Under Phase Change Conditions [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Gemme, F. (2011). Modélisation numérique des phénomènes physiques du soudage par friction-malaxage et comportement en fatigue de joints soudés en aluminium 7075-T6. [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Mahvash Mohammadi, A. (2011). Multi-Component Machine Monitoring and Fault Diagnosis Using Bling Source Separation and Advanced Vibration Analysis [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Nafi, A. (2011). Vérification et diagnostic des machines à mesurer tridimensionnelles avec découplage machine et palpeur. [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Xu, X. (2011). Plasma Actuation for Boundary Layer Separation Control in Engine Ducts [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Martel, S., Mathieu, J.-B., Yahia, L., Soulez, G., & Beaudoin, G. (2011). Method and system for propelling and controlling displacement of a microrobot in a blood vessel. (Brevet no US7962194). Lien externe
Balazinski, M., Songmene, V., & Kishawy, H. A. (2011). Analyzing the machinability of metal matrix composites. Dans Machining Technology for Composite Materials: Principles and Practice (394-411). Lien externe
Hébert, A. (2011). Revisiting the Ceschino interpolation method. Dans Ionescu, C. (édit.), MATLAB - A Ubiquitous Tool for the Practical Engineer (23-36). Disponible
Laberge Lebel, L., & Therriault, D. (2011). Multiscale manufacturing of three-dimensional polymer-based nanocomposite structures. Dans Boreddy, R. (édit.), Advances in Diverse Industrial Applications of Nanocomposites (409-428). Disponible
Rigaud, M. (2011). Metallurgical/materials engineering education in Canada at École Polytechnique. Dans The Canadian metallurgical and materials landscape 1960 to 2011 (37-39). Non disponible
Ruiz, E., & Trochu, F. (2011). Flow modeling in compoiste reinforcements. Dans Boisse, P. (édit.), Research and Markets: Composite Reinforcements for Optimum Performance (588-615). Lien externe
Vu, V.-H., Thomas, M., Lakis, A. A., & Marcouiller, L. (2011). Spectrum and operational modal analysis with vector autoregressive models. Dans Mechanical Vibrations: Types, Testing and Analysis (57-93). Non disponible
Zhang, L., Zhang, L., Marchand, L., & Pierre, S. (2011). A survey of IP layer mobility maangement protocols in next-generation wireless networks. Dans Next generation mobile networks and ubiquitous computing (1-16). Lien externe
