 | Monter d'un niveau |
Abedrabbo, G., Fisette, P., Mousny, M., Mahaudens, P., Detrembleur, C., Samin, J. C., Aubin, C.-É., & Raison, M. (juillet 2011). Dynamic analysis of intervertebral efforts in scoliosis: a multibody modeling approach [Communication écrite]. ECCOMAS Multibody Dynamics Conference, Bruxelles, Belgique. Non disponible
Achiche, S., & Ahmed-Kristensen, S. (2011). Genetic fuzzy modeling of user perception of three-dimensional shapes. Artificial Intelligence for Engineering Design, Analysis and Manufacturing (AIEDAM), 25(1), 93-107. Lien externe
Aïssa, B., Haddad, E., Tagziria, K., Jamroz, W., Asgar-Khan, M., Hoa, S. V., Verreault, J., Higgins, A., & Therriault, D. (septembre 2011). Exploring self healing of CFRP laminates exposed to hypervelocity small pellets simulating space debris [Communication écrite]. 2nd Joint US-Canada Conference on Composites - American Society for Composites, 26th Annual Technical Conference: Canadian Association for Composite Structures and Materials, Montréal, QC, Canada. Lien externe
Aissa, B., Therriault, D., & El Khakani, M. A. (2011). On-substrate growth of single-walled carbon nanotube networks by an "all-laser" processing route. Carbon, 49(8), 2795-2808. Lien externe
Aïssa, B., Therriault, D., Farahani, R. D., & Merle, P. (novembre 2011). Fabrication of three-dimensional microvascular single-walled carbon nanotubes/5-ethylidene-2-norbornene nanocomposite beams by infiltration [Communication écrite]. MRS Fall Meeting 2011, Boston, MA, USA. Non disponible
Akrout, K. (2011). Parcours continus isotropes et surfaces isotropes de manipulateurs sériels [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Aliyu, M. D. S. (2011). H₂ and H∞ Filtering for Nonlinear Singular Systems [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Aliyu, M. D. S., & Boukas, E.-K. (2011). Discrete-time mixed 2/ nonlinear filtering. International Journal of Robust and Nonlinear Control, 21(11), 1257-1282. Lien externe
Aliyu, M. D. S., & Boukas, E.-K. (2011). Extending nonlinear H2, H optimisation to W1,2 and W1, spaces - Part II: Optimal estimation and output-feedback control. New advances in H? control and filtering for nonlinear systems: International Journal of Systems Science, 42(5), 907-920. Lien externe
Aliyu, M. D. S., & Boukas, E.-K. (2011). Extending nonlinear H2, H optimisation to W1,2, W1, spaces - Part I: Optimal control. New advances in H? control and filtering for nonlinear systems: International Journal of Systems Science, 42(5), 889-906. Lien externe
Aliyu, M. D. S., & Boukas, E.-K. (2011). H2 filtering for discrete-time nonlinear singularly perturbed systems. IEEE Transactions on Circuits and Systems I: Regular Papers, 58(8), 1854-1864. Lien externe
Aliyu, M. D. S., & Boukas, E.-K. (2011). H2 filtering for non-linear singularly perturbed systems. IET Control Theory and Applications, 5(17), 2023-2032. Lien externe
Aliyu, M. D. S., & Boukas, E.-K. (2011). H∞-filtering for singularly perturbed nonlinear systems. International Journal of Robust and Nonlinear Control, 21(2), 218-236. Lien externe
Aliyu, M. D. S., & Boukas, E.-K. (2011). Kalman Filtering for Affine Nonlinear Descriptor Systems. Circuits, Systems, and Signal Processing, 30(1), 125-142. Lien externe
Aliyu, M. D. S., & Luttamaguzi, J. (2011). A note on static output-feedback for affine nonlinear systems. Asian Journal of Control, 13(2), 304-308. Lien externe
Allard, Y., Kummert, M., Bernier, M., & Moreau, A. (novembre 2011). Intermodel comparison and experimental validation of electrical water heater models in TRNSYS [Communication écrite]. Building Simulation 2011: 12th International Building Performance Simulation Association Conference, Sydney, Australia. Lien externe
Alloui, Z., & Vasseur, P. (2011). Natural Convection Induced by a Centrifugal Force Field in a Horizontal Annular Porous Layer Saturated with a Binary Fluid. Transport in Porous Media, 88(1), 169-185. Lien externe
Alloui, Z., & Vasseur, P. (2011). Onset of Benard-Marangoni convection in a micropolar fluid. International Journal of Heat and Mass Transfer, 54(13-14), 2765-2773. Lien externe
Alloui, Z., Beji, H., & Vasseur, P. (2011). Double-diffusive and Soret-induced convection of a micropolar fluid in a vertical channel. Computers and Mathematics with Applications, 62(2), 725-736. Lien externe
Alloui, Z., Vasseur, P., & Reggio, M. (2011). Natural convection of nanofluids in a shallow cavity heated from below. International Journal of Thermal Sciences, 50(3), 385-393. Lien externe
Amini, S., Mortazavi, F., Sun, J., Lévesque, M., Hoemann, C. D., & Villemure, I. (mai 2011). The biomechanical behavior of the growth plate under compression is related to its collagen content and organization [Communication écrite]. 17th Annual Canadian Connective Tissue Conference, Montréal, Québec. Non disponible
Amini, S., Veilleux, D., & Villemure, I. (2011). Three-dimensional in situ zonal morphology of viable growth plate chondrocytes : a confocal microscopy study. Journal of Orthopaedic Research, 29(5), 710-717. Lien externe
Andersen, C. L., Gudmundsson, H. P., Achiche, S., & Boelskifte, P. (août 2011). Challenges and limitations of applying an emotion-driven design approach on elderly users [Communication écrite]. 18th International Conference on Engineering Design (ICED 2011), Copenhagen, Denmark. Lien externe
Andolfatto, L., Lavernhe, S., & Mayer, J. R. R. (2011). Evaluation of servo, geometric and dynamic error sources on five-axis high-speed machine tool. International Journal of Machine Tools and Manufacture, 51(10-11), 787-796. Lien externe
Andolfatto, L., Mayer, J. R. R., & Lavernhe, S. (2011). Adaptive Monte Carlo applied to uncertainty estimation in five axis machine tool link errors identification with thermal disturbance. International Journal of Machine Tools and Manufacture, 51(7-8), 618-627. Lien externe
Andre, C., Vasilevskiy, D., Turenne, S., & Masut, R. A. (2011). Increase in the density of states in n-type extruded (Bi₍₁₋ₓ₎Sbₓ)₂(Te₍₁₋y₎Sey)₃ thermoelectric alloys. Journal of Physics D: Applied Physics, 44(23), 235401-235401. Lien externe
Appio, F. P., Achiche, S., Di Minin, A., & McAloone, T. (janvier 2011). Assessment of tools input requirements and output potential in the core front end of NPD [Communication écrite]. 18th IPDM Conference (IPDM 2011), Delft, Netherlands. Non disponible
Appio, F. P., Achiche, S., Di Minin, A., & McAloone, T. (août 2011). Understanding managers decision making process for tools selection in the core front eng of innovation [Communication écrite]. 18th International Conference on Engineering Design (ICED 2011), Copenhagen, Denmark. Lien externe
Arabi, S., Camarero, R., & Guibault, F. (juillet 2011). Moving grids by unstructured computation domain mesh mapping [Communication écrite]. 11th US National Congress on Computational Mechanics, Minneapolis, MN, USA. Non disponible
Aramesh, M., Balazinski, M., Attia, H., Kishawy, H., & Bejjani, R. (septembre 2011). A study on phase transformation and particle distribution during machining titanium metal matrix composites [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, QC, Canada. Lien externe
Arjmand, N., Plamondon, A., Shirazi-Adl, A., Larivière, C., & Parnianpour, M. (juillet 2011). Predictive equations for spinal loads in symmetric lifting using a complex biomechanical model [Communication écrite]. ISB 2011. 23rd Congress of the International Society of Biomechanics, Brussels, Belgium. Non disponible
Arjmand, N., Plamondon, A., Shirazi-Adl, A., Larivière, C., & Parnianpour, M. (janvier 2011). Predictive equations for spinal loads in symmetric lifting using a complex biomechanical model [Communication écrite]. 57th Annual Meeting of the Orthopaedic Research Society, Long Beach, California. Lien externe
Arjmand, N., Plamondon, A., Shirazi-Adl, A., Larivière, C., & Parnianpour, M. (2011). Predictive equations to estimate spinal loads in symmetric lifting tasks. Journal of Biomechanics, 44(1), 84-91. Lien externe
Assa, B., Nechache, R., Therriault, D., Rosei, F., & Nedil, M. (2011). High-frequency electromagnetic properties of epitaxial Bi 2FeCrO6 thin films grown by pulsed laser deposition. Applied Physics Letters, 99(18). Lien externe
Aubin, C.-É., Bellefleur, C., Joncas, J., de Lanauze, D., Kadoury, S., Blanke, K., Parent, S., & Labelle, H. (2011). Reliability and Accuracy Analysis of a New Semiautomatic Radiographic Measurement Software in Adult Scoliosis. Spine, 36(12), E780-E790. Lien externe
Aubin, C.-É., Villemure, I., Wakula, Y., Driscoll, M., & Parent, P. (juillet 2011). Characterization of in vivo vertebral growth modulation by shape memory alloy staples in a porcine model [Communication écrite]. 18th International Meeting on Advanced Spine Techniques, IMAST, Copenhagen, Denmark. Non disponible
Aubin, C.-É., Wang, X., Crandall, D., & Labelle, H. (2011). Biomechanical Comparison of Pedicle Screw Instrumentation Systems for 3D Correction of Adolescent Idiopathic Scoliosis. (Rapport technique n° MD006498-1.0/1111). Non disponible
Baïlon-Poujol, I., Bailon, J.-P., & L'Espérance, G. (2011). Ball-mill grinding kinetics of master alloys for steel powder metallurgy applications. Powder Technology, 210(3), 267-272. Lien externe
Balazinski, M., Songmene, V., & Kishawy, H. A. (2011). Analyzing the machinability of metal matrix composites. Dans Machining Technology for Composite Materials: Principles and Practice (p. 394-411). Lien externe
Baron, L., Balazinski, M., & Ren, Q. (2011). Type2 TSK Fuzzy Logic System and its Type1 Counterpart. International Journal of Computer Applications, 20(6), 8-13. Lien externe
Bazrgari, B., Nussbaum, M. A., Madigan, M. L., & Shirazi-Adl, A. (2011). Soft tissue wobbling affects trunk dynamic response in sudden perturbations. Journal of Biomechanics, 44(3), 547-551. Lien externe
Beaudette, K., Strupler, M., Benboujja, F., Parent, S., Aubin, C.-É., & Boudoux, C. (octobre 2011). Tomographie par cohérence optique pour l'identification de structures musculo-squelettiques du rachis [Communication écrite]. 41e réunion annuelle de la Société de Scoliose du Québec, Québec, Canada. Non disponible
Beaudette, K., Strupler, M., Driscoll, M., Parent, S., Maciejko, R., Aubin, C.-É., & Boudoux, C. (janvier 2011). Optical coherence tomography as a guiding tool for minimally invasive surgeries of the spine [Communication écrite]. SPIE Photonics West 2011, San Francisco, Canada. Non disponible
Beausoleil-Morrison, I., Macdonald, F., Kummert, M., Mcdowell, T., Jost, R., & Ferguson, A. (novembre 2011). The design of an ESP-r and TRNSYS co-simulator [Communication écrite]. Building Simulation 2011 : 12th Conference of International Building Performance Simulation Association, Sydney, Australie. Lien externe
Bejjani, R., Aramesh, M., Balazinski, M., Kishawy, H., & Attia, H. (juin 2011). Chip morphology study of titanium metal matrix composites [Communication écrite]. 23rd Canadian Congress of Applied Mechanics, Vancouver, Canada. Lien externe
Bejjani, R., Balazinski, M., Attia, H., Aramesh, M., & Kishawy, H. (septembre 2011). Segmentation and shear localization when turning titanium metal matrix composites [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, QC, Canada. Lien externe
Bejjani, R., Balazinski, M., Shi, B., Attia, H., & Kishawy, H. (2011). Machinability and chip formation of titanium metal matrix composites. International Journal of Advanced Manufacturing Systems, 13(1), 81-96. Non disponible
Bejjani, R., Shi, B., Attia, H., & Balazinski, M. (2011). Laser assisted turning of Titanium Metal Matrix Composite. CIRP Annals - Manufacturing Technology, 60(1), 61-64. Lien externe
Bensadoun, F. (2011). Développement et caractérisation d'un procédé de fabrication de composites et biocomposites à base de nanoparticules d'argile et de résine polyester insaturée destinés à l'industrie du transport. [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Bensadoun, F., Billotte, C., Kchit, N., Bickerton, S., Trochu, F., & Ruiz, E. (septembre 2011). Development, characterization and manufacturing of nanocomposites and bionanocomposites for transportation industry [Communication écrite]. 2nd Joint US-Canada Conference on Composites and 26th ASC Annual Technical Conference, Montréal, Québec. Non disponible
Bensadoun, F., Kchit, N., Billotte, C., Bickerton, S., Trochu, F., & Ruiz, E. (2011). A Study of Nanoclay Reinforcement of Biocomposites Made by Liquid Composite Molding. International Journal of Polymer Science, 2011, 1-10. Disponible
Bensadoun, F., Kchit, N., Billotte, C., Trochu, F., & Ruiz, E. (2011). A Comparative Study of Dispersion Techniques for Nanocomposite Made with Nanoclays and an Unsaturated Polyester Resin. Journal of Nanomaterials, 2011, 406087. Disponible
Bernier, F., Beaulieu, P., Bailon, J.-P., & L'Espérance, G. (2011). Effect of Cu infiltration on static and dynamic properties of PM steels. Powder Metallurgy, 54(3), 314-319. Lien externe
Bernier, F., Plamondon, P., Bailon, J.-P., & L'Espérance, G. (2011). Microstructural characterisation of nickel rich areas and their influence on endurance limit of sintered steel. Powder Metallurgy, 54(5), 559-565. Lien externe
Bilotte, C., Morin, B. F., Cara, F., Baurier, H., & Ruiz, E. (septembre 2011). Chemical shrinkage and thermomechanical characterization of an expoxy resin during cure by a novel in situ measurement method [Communication écrite]. 2nd Joint US-Canada Conference on Composites and 26th ASC Annual Technical Conference, Montréal, Québec. Non disponible
Birglen, L. (2011). The kinematic preshaping of triggered self-adaptive linkage-driven robotic fingers. Mechanical Sciences, 2(1), 41-49. Disponible
Biron, G. (2011). Optimisation des assemblages par interférence soumis à des sollicitations de fatigue. [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Blanchet, G., Delfour, M. C., & Garon, A. (2011). Quadratic models to fit experimental data of paclitaxel release kinetics from biodegradable polymers. SIAM Journal on Applied Mathematics, 71(6), 2269-2286. Lien externe
Bouchaar, M. (2011). Conception d'un montage de mircrofabrication pour les nanocomposites à base de résines thermoplastiques [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Braulio, M. A. L., Rigaud, M., Buhr, A., Parr, C., & Pandolfelli, V. C. (2011). Spinel-containing alumina-based refractory castables. Ceramics International, 37(6), 1705-1724. Lien externe
Bruneau, A., Laitenberger, M., & Raison, M. (juillet 2011). Dynamical analysis of the upper members: towards a model refinement and the development of a rehabilitation tool [Communication écrite]. ECCOMAS Multibody Dynamics Conference, Bruxelles, Belgique. Non disponible
Bui-Quoc, T., Julien, D., & Lévesque, M. (2011). Étude du comportement en fatigue propagation de l'acier A-514 a l'air ambiant. (Rapport technique). Non disponible
Burlet-Vienney, D., Chinniah, Y. A., Boukas, E.-K., Pizarro-Chong, A., & El Aboudi, M. (octobre 2011). Conception d'un outil d'observation et de suivi de procédures de cadenassage en milieu industriel [Communication écrite]. 9ème Congrès internationale de génie industriel, CIGI 2011, Saint-Sauveur, Canada. Lien externe
Caouette, C., Yahia, L., & Bureau, M. N. (2011). Reduced stress shielding with limited micromotions using a carbon fibre composite biomimetic hip stem: A finite element model. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 225(9), 907-919. Lien externe
Castro, L., Urquiza, G., Adamkowski, A., & Reggio, M. (2011). Experimental and numerical simulations predictions comparison of power and efficiency in hydraulic turbine. Modelling and Simulation in Engineering, 2011, 1-8. Disponible
Cauret, O., & Kummert, M. (2011). Potential of solar assisted ground source heat pumps with unglazed solar collectors for French office buildings. REHVA European HVAC Journal, 48(4), 16-21. Non disponible
Causse, P. (2011). Développement et analyse du procédé d'injection flexible pour la mise en forme de pièces composites fortement courbées [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Causse, P., Ruiz, E., & Trochu, F. (août 2011). Analysis of fiber preforming for improved manufacturing of curved parts by flexible injection [Communication écrite]. 18th International Conference on Composite Materials, Jeju Island, Korea. Lien externe
Causse, P., Ruiz, E., & Trochu, F. (2011). Experimental study of flexible injection to manufacture parts of strong curvature. Polymer Composites, 32(6), 892-895. Lien externe
Causse, P., Ruiz, E., & Trochu, F. (septembre 2011). Fabrication of curved parts by flexible injection : influence of processing conditions on composite quality and analysis of distortion [Communication écrite]. 2nd Joint US-Canada Conference on Composites and 26th ASC Annual Technical Conference, Montréal, Québec. Non disponible
Charlot, L. (2011). Calcul et analyse de sensibilité des écoulements à surface libre [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Chen, J. Q., Verreman, Y., Besson, J., Madi, Y., & Morgeneyer, T. F. (octobre 2011). Ductile fracture of AA2198 aluminium-lithium-copper alloys used in the aeronautical industry [Communication écrite]. Conférence des Métallurgistes, COM2011, Montréal, Québec. Non disponible
Chokri, A. (2011). Target Allocation under Uncertainty during the Vehicle Development Process [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Chouinard, A. (2011). Remplacement de l'usinage chimique des tôles aéronautiques minces en aluminium par de l'usinage mécanique. [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Clin, J., Aubin, C.-É., Lalonde, N., Parent, S., & Labelle, H. (2011). A new method to include the gravitational forces in a finite element model of the scoliotic spine. Medical and Biological Engineering and Computing, 49(8), 967-977. Lien externe
Clin, J., Aubin, C.-É., Parent, S., & Labelle, H. (2011). Biomechanical modeling of brace treatment of scoliosis: effects of gravitational loads. Medical and Biological Engineering and Computing, 49(7), 743-753. Lien externe
Cloutier, G., Savard, P., & Boudreault, Y. (juin 2011). Towards a scale and tool for the appraisal of CEAB attributes - Progress report on a field test [Communication écrite]. 2nd Annual CEEA Conference, Memorial University St. John's, Newfoundland (6 pages). Publié dans Proceedings of the ... CEEA Conference. Lien externe
Cori, J.-F. (2011). Analyse et caractérisation d'interactions fluide-structure instationnaires en grands déplacements [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Cori, J.-F., Étienne, S., & Pelletier, D. (janvier 2011). On the Determination of Propulsive Characteristics of a Flapping Airfoil with Advanced ALE Method [Communication écrite]. 49th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition, Orlando, Florida. Lien externe
Côté, M. (2011). Estimation d'incertitudes associées aux huit écarts de membrure d'une machine-outil [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Courchesne Tardif, A. (2011). Conception et optimisation de systèmes énergétiques hybrides pour communautés durables [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Courchesne-Tardif, A., Kummert, M., Demark, S., Butler, T., Pear, D., Jones, S., Charneux, R., Genest, F., & Picard, D. (novembre 2011). Assessing community-scale energy supply scenarios using TRNSYS simulations [Communication écrite]. 12th Conference of International Building Performance Simulation Association (Building Simulation 2011), Sydney, Australie. Lien externe
Crochon, T., Li, C., & Lévesque, M. (septembre 2011). Finite-Element implementation of Schapery-type constitutive theories based on an internal variables approach [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Lien externe
Dalir, H., Farahani, R. D., Nhim, V., Samson, B., Lévesque, M., & Therriault, D. (novembre 2010). Microstructural and mechanical properties of polyester/nanoclay nanocomposites: Microstructure-mixing strategy correlation [Communication écrite]. MRS Fall Meeting, Boston, MA. Publié dans MRS Proceedings, 1312. Lien externe
Dermanaki Farahani, R. (2011). Three-Dimensional Microstructures of Epoxy-Carbon Nanotube Nanocomposites [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Désilets, J.-F. (2011). Développement et optimisation d'un procédé de mise en forme par injection d'une pièce complexe à épaisseur variable en matériaux composites [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Dextraze, J.-P. (2011). Étude d'un procédé de fraisage immergé applicable à une fraiseuse submersible et portable. [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Dimitrievska, S., Maire, M., Diaz-Quijada, G. A., Robitaille, L., Ajji, A., Yahia, L., Moreno, M., Merhi, Y., & Bureau, M. (2011). Low Thrombogenicity Coating of Nonwoven PET Fiber Structures for Vascular Grafts. Macromolecular Bioscience, 11(4), 493-502. Lien externe
Dimitrievska, S., Petit, A., Doillon, C. J., Epure, L., Ajji, A., Yahia, L., & Bureau, M. (2011). Effect of Sterilization on Non-woven Polyethylene Terephthalate Fiber Structures for Vascular Grafts. Macromolecular Bioscience, 11(1), 13-21. Lien externe
Driscoll, C., Aubin, C.-É., Labelle, H., & Dansereau, J. (2011). Assessment of two novel surgical positions for the reduction of scoliotic deformities: lateral leg displacement and hip torsion. European Spine Journal, 20(10), 1711-1719. Lien externe
Driscoll, M., Aubin, C.-É., Moreau, A., & Parent, S. (2011). Biomechanical comparison of fusionless growth modulation corrective techniques in pediatric scoliosis. Medical and Biological Engineering and Computing, 49(12), 1437-1445. Lien externe
Durango, S., Correa, J., Aristizabal, M., Ruiz, O., Restrepo-Giraldo, J. D., & Achiche, S. (septembre 2011). Force-displacement model of compliant mechanisms using assur sub-chains [Communication écrite]. 13th World Congress in Mechanism and Machine Science (IFToMM 2011), Guanajuato, Mexico. Non disponible
El Hassan, M., Meslem, A., & Abed-Meraim, K. (2011). Experimental investigation of the flow in the near-field of a cross-shaped orifice jet. Physics of Fluids, 23(4). Lien externe
El Mourid, A., Ganesan, R., & Lévesque, M. (septembre 2011). Modeling of the linearly viscoelastic behavior of a braided composite [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Lien externe
El Mourid, A., Ganesan, R., & Lévesque, M. (juin 2011). Prédiction du comportement viscoélastique de matériaux composites textiles par une approche d'homogénéisation [Communication écrite]. 17es Journées nationales sur les composites (JNC 2011), Poitiers-Futuroscope, France. Lien externe
Erkan, T., Mayer, J. R. R., & Dupont, Y. (2011). Volumetric distortion assessment of a five-axis machine by probing a 3D reconfigurable uncalibrated master ball artefact. Precision Engineering, 35(1), 116-125. Lien externe
Erkan, T., Mayer, J. R. R., & Wozniak, A. (2011). Surface probing simulator for the evaluation of CMM probe radius correction software. International Journal of Advanced Manufacturing Technology, 55(1-4), 307-315. Lien externe
Eslami Nejad, P. (2011). Double U-Tube Geothermal Borehole Operation Under Phase Change Conditions [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Eslami Nejad, P., & Bernier, M. (2011). Coupling of geothermal heat pumps with thermal solar collectors using double U-tube boreholes with two independent circuits. Applied Thermal Engineering, 31(14-15), 3066-3077. Lien externe
Eslami Nejad, P., & Bernier, M. (2011). Heat Transfer in Double U-Tube Boreholes With Two Independent Circuits. Journal of Heat Transfer, 133(8). Lien externe
Étienne, S., & Pelletier, D. (juillet 2011). Tube Arrays Flow-Induced Vibrations Simulations With Ale Finite Element Method [Communication écrite]. ASME Pressure Vessels and Piping Conference (Pvp-2011), Baltimore, MD, USA. Lien externe
Farahani, R. D., Dalir, H., Aïssa, B., El Khakani, M. A., Lévesque, M., & Therriault, D. (2011). Micro-infiltration of three-dimensional porous networks with carbon nanotube-based nanocomposite for material design. Composites Part A: Applied Science and Manufacturing, 42(12), 1910-1919. Disponible
Farahani, R. D., El Khakani, M. A., Lévesque, M., & Therriault, D. (septembre 2011). UV-assisted directwrite fabrication of microstructures using biotin-grafted single-walled carbon nanotubes/epoxy nanocomposites : mechanical and rheological studies [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Non disponible
Farahani, R. D., Moussaddy, H., El Khakani, M. A., Lévesque, M., & Therriault, D. (septembre 2011). Ultraviolet direct-write fabrication of chemically treated single-walled carbon nanotube nanocomposite microfibers : experimental and modeling studies [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Non disponible
Ferreira Benevides, A. (2011). Fabrication d'une pièce composite axisymétrique 3D à haut taux de fibres et à haute température par le procédé polyflex. [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Fisette, P., Abedrabbo, G., Poncelet, A., Sapin, J., & Raison, M. (mars 2011). Multibody modeling and analysis in the service of biomechanics [Communication écrite]. Euromech colloquium 511, Biomechanics of Human Motion, Ponta Delgada, Açores, Portugal. Non disponible
Fotsing, R., Sola, M., Ross, A., & Ruiz, E. (juillet 2011). Lightweight damping treatment of composite sandwich beams [Communication écrite]. 18th International Congress on Sound and Vibration, Rio de Janeiro, Brazil. Non disponible
Gagnon, D., Arjmand, N., Plamondon, A., Shirazi-Adl, A., & Larivière, C. (2011). An improved multi-joint EMG-assisted optimization approach to estimate joint and muscle forces in a musculoskeletal model of the lumbar spine. Journal of Biomechanics, 44(8), 1521-1529. Lien externe
Gagnon, D., Arjmand, N., Plamondon, A., Shirazi-Adl, A., & Larivière, C. (juillet 2011). The influence of abdominal oblique modeling on predicted muscle forces and lumbar spine loads [Communication écrite]. ISB2011 Brussels, Brussels, Belgium. Lien externe
Galbusera, F., Schmidt, H., Noailly, J., Malandrino, A., Lacroix, D., Wilke, H.-J., & Shirazi-Adl, A. (2011). Comparison of four methods to simulate swelling in poroelastic finite element models of intervertebral discs. Journal of the Mechanical Behavior of Biomedical Materials, 4(7), 1234-1241. Lien externe
Galvan, S., Reggio, M., Guibault, F., & Gutierrez, H. (février 2011). Analisis del flujo en el modelo del aspirador de la turbina 99 : resultado de la optimizacion del perfil de velocidades en la entrada [Communication écrite]. 12. Congreso y Exposición Latinoamericana de Turbomaquinaria, Querétaro, Mexico. Non disponible
Gao, Y., Étienne, S., Yu, D., Wang, X., & Tan, S. (2011). Bi-stable flow around tandem cylinders of different diameters at low Reynolds number. Fluid Dynamics Research, 43(5). Lien externe
Gariépy, A., Larose, S., Perron, C., & Lévesque, M. (mai 2011). Sequence-sensitive peen forming modelling [Communication écrite]. ASME Applied Mechanics and Materials (McMat 2011), Chicago, IL, USA. Non disponible
Gariepy, A., Larose, S., Perron, C., & Lévesque, M. (2011). Shot peening and peen forming finite element modelling-towards a quantitative method. International Journal of Solids and Structures, 48(20), 2859-2877. Lien externe
Gariepy, M., Trépanier, J.-Y., & Masson, C. (2011). Convergence criterion for a far-field drag prediction and decomposition method. AIAA Journal, 49(12), 2814-2818. Lien externe
Garo, A., Arnoux, P. J., Wagnac, E., & Aubin, C.-É. (2011). Calibration of the mechanical properties in a finite element model of a lumbar vertebra under dynamic compression up to failure. Medical and Biological Engineering and Computing, 49(12), 1371-1379. Lien externe
Geitmann, A., Fayant, P., Girlanda, O., Chebli, Y., Villemure, I., & Aubin, C.-É. (2011). Finite Element Modeling of Polar Growth in Walled Cells. Biophysical Journal, 100(3), 190-190. Lien externe
Gemme, F. (2011). Modélisation numérique des phénomènes physiques du soudage par friction-malaxage et comportement en fatigue de joints soudés en aluminium 7075-T6. [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Gemme, F., Verreman, Y., Dubourg, L., & Wanjara, P. (2011). Effect of welding parameters on microstructure and mechanical properties of AA7075-T6 friction stir welded joints. Fatigue and Fracture of Engineering Materials and Structures, 34(11), 877-886. Lien externe
Ghosh, S. (2011). Plasma Actuation for Active Control of Wind Turbine Power [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Ghossein, E., & Lévesque, M. (septembre 2011). A fully automated tool for a comprehensive validation of analytical homogenization models [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Lien externe
Ghossein, E., & Lévesque, M. (juin 2011). Un outil complètement automatisé pour l'évaluation en profondeur des performances des modèles d'homogénéisation [Communication écrite]. 17es Journées nationales sur les composites (JNC 2011), Poitiers-Futuroscope, France. Lien externe
Giraudeau, M. (2011). Forces fluctuantes générées par un écoulement diphasique interne : mécanisme et modélisation. [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Giraudeau, M., Pettigrew, M. J., & Mureithi, N. W. (juillet 2011). Two-Phase Flow Excitation Forces on a Vertical U-Bend Tube [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2011), Baltimore, MD, USA. Lien externe
Givi, M., Fadaei Tehrani, A., & Mohammadi, A. (2011). Polishing of the aluminum sheets with magnetic abrasive finishing method. International Journal of Advanced Manufacturing Technology, 61(9-12), 1-10. Lien externe
Gosselin, F., Lalande, V., & Martel, S. (2011). Characterization of the deflections of a catheter steered using a magnetic resonance imaging system. Medical Physics, 38(9), 4994-5002. Lien externe
Grunhagen, T., Shirazi-Adl, A., Fairbank, J. C. T., & Urban, J. P. G. (2011). Intervertebral disk nutrition : a review of factors influencing concentrations of nutrients and metabolites. Orthopaedic clinics of North America, 42(4), 465-477. Lien externe
Gudmundsson, H. P., Andersen, C. L., Achiche, S., & Boelskifte, P. (août 2011). Emotion-driven elicitation of elderly people user needs illustrated by a walking frame case study [Communication écrite]. 18th International Conference on Engineering Design (ICED 2011), Copenhagen, Denmark. Lien externe
Guiassa, R., & Mayer, J. R. R. (2011). Predictive compliance based model for compensation in multi-pass milling by on-machine probing. CIRP Annals - Manufacturing Technology, 60(1), 391-394. Lien externe
Guiet, J., Reggio, M., & Teyssedou, A. (2011). Implementation and application of the lattice Boltzmann method using Matlab. Engineering Applications of Computational Fluid Mechanics, 5(1), 117-126. Lien externe
Guiet, J., Reggio, M., & Vasseur, P. (2011). Natural convection of nanofluids in heated enclosures using the lattice Boltzmann method. Computational Thermal Sciences, 3(4), 301-316. Lien externe
Gutierrez, J., Trochu, F., & Ruiz, E. (septembre 2011). Effects of high frequency vibrations on the compressibility of dry fibrous reinforcements [Communication écrite]. 2nd Joint US-Canada Conference on Composites and 26th ASC Annual Technical Conference, Montréal, Québec. Non disponible
Habib, M., El Khakani, M., Aïssa, B., Denidni, T., Laberge Lebel, L., & Therriault, D. (2011). Super-high-frequency shielding properties of excimer-laser-synthesized-single-wall-carbon-nanotubes/polyurethane nanocomposite films. Journal of Applied Physics, 109(8). Lien externe
Hadj Henni, A., Schmitt, C., Tremblay, M.-E., Hamdine, M., Heuzey, M.-C., Carreau, P., & Cloutier, G. (2011). Hyper-frequency viscoelastic spectroscopy of biomaterials. Journal of the Mechanical Behavior of Biomedical Materials, 4(7), 1115-1122. Lien externe
Hadjizadeh, A., Ajji, A., & Bureau, M. (2011). Nano/micro electro-spun polyethylene terephthalate fibrous mat preparation and characterization. Journal of the Mechanical Behavior of Biomedical Materials, 4(3), 340-351. Lien externe
Hébert, A. (2011). Revisiting the Ceschino interpolation method. Dans Ionescu, C. (édit.), MATLAB - A Ubiquitous Tool for the Practical Engineer (p. 23-36). Disponible
Helpin, V., Kummert, M., & Cauret, O. (novembre 2011). Experimental and simulation study of hybrid ground-source heat pump systems with unglazed solar collectors for french office buildings [Communication écrite]. Building Simulation 2011: 12th Conference of International Building Performance Simulation Association, Sydney, Australie. Lien externe
Huo, L., & Baron, L. (2011). The self-adaptation of weights for joint-limits and singularity avoidances of functionally redundant robotic-task. Robotics and Computer-Integrated Manufacturing, 27(2), 367-76. Lien externe
Jamati, F. (2011). Étude numérique d'une éolienne hybride asynchrone [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Kang, H. S., Mureithi, N. W., & Pettigrew, M. J. (mai 2011). An experimental investigation on the narrow annular-flow-induced vibration instability of a tube [Communication écrite]. 6th Subrata Chakrabarti International Conference on Fluid Structure Interaction (Fluid Structure Interaction 2011), Orlando, FL, United states. Lien externe
Khan, K. A., Barello, R., Muliana, A. H., & Lévesque, M. (2011). Coupled heat conduction and thermal stress analyses in particulate composites. Mechanics of Materials, 43(10), 608-625. Lien externe
Kim, E.-J., Roux, J.-J., Bernier, M., & Cauret, O. (2011). Three-dimensional numerical modeling of vertical ground heat exchangers : Domain decomposition and state model reduction. International journal of heating, ventilating, air-conditioning, and refrigeration research, 17(6), 912-927. Lien externe
Kim, E.-J., Roux, J.-J., Bernier, M., & Cauret, O. (juin 2011). Validation expérimentale d'un modèle détaillé d'échangeurs géothermiques verticaux [Communication écrite]. Xe Colloque Inter-universitaire Franco-Québécois, Chicoutimi, Québec. Non disponible
Kishawy, H. A., Pang, L., & Balazinski, M. (2011). Modeling of tool wear during hard turning with self-propelled rotary tools. International Journal of Mechanical Sciences, 53(11), 1015-1021. Lien externe
Klim, Z. H., Balazinski, M., & Komljenovic, D. (mai 2011). Probabilistic approach limitations in the analysis of safety critical systems [Communication écrite]. 24th International Congress on Condition Monitoring and Diagnostics Engineering Management, Stavanger, Norway. Lien externe
Labelle, H., Aubin, C.-É., Lenke, L., Newton, P., Stokes, I., Jackson, R., & Parent, S. (2011). Seeing the spine in 3D : how will it change what we do? Journal of Pediatric Orthopaedics, 31(1), S37-S45. Lien externe
Laberge Lebel, L., & Therriault, D. (2011). Multiscale manufacturing of three-dimensional polymer-based nanocomposite structures. Dans Boreddy, R. (édit.), Advances in Diverse Industrial Applications of Nanocomposites (p. 409-428). Disponible
Lacroix, S., De Marcellis-Warin, N., Riopel, D., Ross, A., & Bernandini, N. (juin 2011). Facteurs d'influence des choix d'études en génie dees femmes [Communication écrite]. Colloque international HELENA Formation interdisciplinaire des ingénieurs et problème du genre (GIEE 2011), Paris, France. Lien externe
Lakis, A. A., Toorani, M. H., Kerboua, Y., Esmailzadeh, M., & Sabri, F. (2011). Theory, analysis and design of fluid-shell structures. Structural Longevity, 6(3), 155-185. Lien externe
Lakis, A. A., Toorani, M. H., Kerboua, Y., Esmailzadeh, M., & Sabri, F. (avril 2011). Theory, analysis, and design of fluid-shell structures [Communication écrite]. 11th International Conference on Computational & Experimental Engineering & Sciences, Nanjing, China. Non disponible
Lanoue, F., Vadean, A., & Sanschagrin, B. (2011). Fretting fatigue strength reduction factor for interference fits. Simulation Modelling Practice and Theory, 19(9), 1811-1823. Lien externe
Lebleu, J., Raison, M., Mahaudens, P., Mousny, M., & Detrembleur, C. (octobre 2011). Comparison of efforts at the lombosacral joint during gait between populations of healthy and scoliotic subjects with different severities [Communication écrite]. 41e réunion annuelle de la Société de Scoliose du Québec, Québec, Canada. Non disponible
Leclaire, S., Reggio, M., & Trépanier, J.-Y. (2011). Isotropic color gradient for simulating very high-density ratios with a two-phase flow lattice Boltzmann model. Computers and Fluids, 48(1), 98-112. Lien externe
Leclaire, S., Reggio, M., & Trépanier, J.-Y. (avril 2011). Lattice Boltzmann immiscible three-phase model [Communication écrite]. 19th Annual Conference of the CFD Society of Canada, Montréal, Québec. Non disponible
Legay, P. (2011). Étude de l'influence de défauts sur les propriétés mécaniques de matériaux composites fabriqués par le procédé de placement de fibres [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Legay, P., Boukhili, R., Hojjati, M., & Chen, J. (septembre 2011). Impact and compression behaviour of AFP manufactured carbon/epoxy composites containing gaps and overlaps [Communication écrite]. American Society for Composites 26 th Annual Technical Conference/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Non disponible
Lemire, S., & Vo, H. D. (2011). Reduction of Fan and Compressor Wake Defect Using Plasma Actuation for Tonal Noise Reduction. Journal of Turbomachinery, 133(1), 011017-011017. Lien externe
Lévesque, M., Bernier, M., & Genest, F. (juin 2011). Simulation de dalles rayonnantes couplées à des pompes à chaleur géothermiques [Communication écrite]. Xe Colloque Inter-universitaire Franco-Québécois, Chicoutimi, Québec. Non disponible
Lupien, A. (2011). Une approche 3D pour la paramétrisation de pales de turbosoufflantes transsoniques [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Ma, S., & Boukas, E.-K. (2011). Guaranteed cost control of uncertain discrete-time singular Markov jump systems with indefinite quadratic cost. International Journal of Robust and Nonlinear Control, 21(9), 1031-1045. Lien externe
Mahjoub, M., Roy, R., & Koclas, J. (septembre 2011). Generalized perturbation therory estimates to improve CANDU6 reflectors [Communication écrite]. 2nd International Conference on Physics and Technology of Reactors and Applications, Fez Morocco. Non disponible
Mahvash Mohammadi, A. (2011). Multi-Component Machine Monitoring and Fault Diagnosis Using Bling Source Separation and Advanced Vibration Analysis [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Mahvash, A., & Lakis, A. A. (2011). A novel approach to evaluation of vibration source separation based on spatial distribution of sensors and Fourier transforms. Journal of Dynamic Systems, Measurement and Control, 133(6), 9 pages. Lien externe
Manac'h, Y.-G. (2011). Conception d'une chambre de culture et de sollicitation permettant l'imagerie par résonance magnétique du disque intervertébral isolé [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Martel, A. (2011). Caractérisation d'une poudre nanométrique de MoSi2 et étude du procédé de moulage par injection de poudres [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Martel, S., Mathieu, J.-B., Yahia, L., Soulez, G., & Beaudoin, G. (2011). Method and system for propelling and controlling displacement of a microrobot in a blood vessel. (Brevet no US7962194). Lien externe
Mascle, C., & Gosse, J. (octobre 2011). Optimisation des stocks par la prévision des ventes [Communication écrite]. 9e Congrès international de génie industriel (CIGI 2011), St-Sauveur, Québec. Lien externe
Mascle, C., Balazinski, M., & Ben Mhenni, A. (2011). Effect of roughness and interference on torque capacity of a shrink fitted tool holder. International Journal of Advanced Manufacturing Systems, 13(1), 149-165. Non disponible
Mascle, C., Baptiste, P., & Latremouille-Viau, J. (mai 2011). Management of airframe disassembly and dismantling for reusing, remanufacturing and recycling [Communication écrite]. International Conference on Industrial Engineering and Systems Management (IESM 2011), Metz, France. Non disponible
Massicotte, R., Ginestet, P., Yahia, L., Pichette, G., & Mafu, A. A. (2011). Comparative study from a chemical perspective of two- and three-step disinfection techniques to control Clostridium difficile spores. International Journal of Infection Control, 7(4), 8 pages. Disponible
Mehdi Zadeh, F. (2011). Amélioration de la condition frontière de face de soufflante pour la conception de l'admission d'air sous distorsion [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Ménard, A. L., Valteau, B., Grimard, G., Londono, I., & Villemure, I. (octobre 2011). Influence des paramètres de chargement dynamique sur la modulation de croissance [Communication écrite]. 41e réunion annuelle de la Société de Scoliose du Québec, Québec, Canada. Non disponible
Miao, H. Y., & Lévesque, M. (septembre 2011). Effect of shot peening on the fatigue life and crack propagation prediction with experiments and Navarro-Rios Model [Communication écrite]. 11th International Conference of Shot Peening (ICSP 2011), South Bend, Indiana, USA. Lien externe
Miao, H. Y., & Lévesque, M. (avril 2011). Experimental study and numerical simulation of the stress peen forming process [Communication écrite]. 58th CASI Aeronautics Conference (AERO 2011), Montréal, Québec. Non disponible
Miao, H. Y., & Lévesque, M. (août 2011). Experimental study of shot peening and stress peen forming [Communication écrite]. EPS Montréal International Conference on Advanced Materials and Processing 2011, Montréal, Québec. Non disponible
Miao, H. Y., & Lévesque, M. (avril 2011). Numerical models for the optimization of the fatigue life improvement by the shot peening process [Communication écrite]. 58th CASI Aeronautics Conference (AERO 2011), Montréal, Québec. Non disponible
Miao, H. Y., & Lévesque, M. (septembre 2011). On the potential application of a numerical optimization of fatigue life with DoE and FEM [Communication écrite]. 11th International Conference of Shot Peening (ICSP 2011), South Bend, Indiana, USA. Lien externe
Miao, H. Y., Larose, S., Perron, C., & Lévesque, M. (2011). Numerical simulation of the stress peen forming process and experimental validation. Advances in Engineering Software, 42(11), 963-975. Lien externe
Michel, L., Vadean, A., & Benoit, R. (2011). Tire burst phenomenon and rupture of a typical truck tire bead design. Tire Science and Technology, 39(4), 270-283. Lien externe
Moatari Kazerouni, A., Achiche, S., Hisarciklilar, O., & Thomson, V. (2011). Appraisal of new product development success indicators in the aerospace industry. Journal of Mechanical Design, 133(10). Lien externe
Moatari Kazerouni, A., Achiche, S., Hisarciklilar, O., & Thomson, V. (août 2011). Influence of time perspective on new product development success indicators [Communication écrite]. 18th International Conference on Engineering Design (ICED 2011), Copenhagen, Denmark. Lien externe
Moreno, M. J., Ajji, A., Mohebbi-Kalhori, D., Rukhlova, M., Hadjizadeh, A., & Bureau, M. (2011). Development of a compliant and cytocompatible micro-fibrous polyethylene terephthalate vascular scaffold. Journal of Biomedical Materials Research. Part B, Applied Biomaterials, 97 B(2), 201-214. Lien externe
Mortada, M. A., Yacout, S., & Lakis, A. A. (mars 2011). CBMLAD : Using logical analysis of data in condition based maintenance [Communication écrite]. International Conference on Systems Engineering and Modeling (ICSEM 2011), Shanghai, China. Non disponible
Mortada, M.-A., Yacout, S., & Lakis, A. A. (2011). Diagnosis of rotor bearings using logical analysis of data. Journal of Quality in Maintenance Engineering, 17(4), 371-397. Lien externe
Mortazavi, F., Lévesque, M., & Villemure, I. (juin 2011). Improved spectral approach for continuous displacement measurement from digital images [Communication écrite]. SEM Annual Conference & Exposition on Experimental and Applied Mechanics, Uncasville, Connecticut. Lien externe
Mortazavi, F., Lévesque, M., & Villemure, I. (septembre 2011). On the application of a hybrid spectral approach to the image-based measurement of displacements at micro-scale in composites [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Lien externe
Motaghinasab, S., Shirazi-Adl, A., Urban, J. P. G., & Parnianpour, M. (janvier 2011). Penetration of solutes into the intervertebral disc after intravenous injection [Communication écrite]. 57th Annual Meeting of the Orthopaedic Research Society, Long Beach, California. Lien externe
Motaghinasab, S., Shirazi-Adl, A., Urban, J., Parnianpour, M., & Hoviattalab, M. (décembre 2011). Computational investigation of sulphate diffusion into the dog disc [Communication écrite]. 18th Iranian Conference of Biomedical Engineering, Tehran, Iran. Lien externe
Moussaddy, H., Farahani, R. D., El Khakani, M. A., Lévesque, M., & Therriault, D. (septembre 2011). Mechanical properties of chemically-treated carbon nanotube nanocomposite microfibers : experimental and modeling studies [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Lien externe
Moussaddy, H., Lévesque, M., & Therriault, D. (septembre 2011). Comparing finite element and analytical micromechanical modeling of randomly oriented single walled carbon nanotubes reinforced nanocomposites [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Lien externe
Moussaddy, H., Lévesque, M., & Therriault, D. (juin 2011). Évaluation des performances des modèles d'homogénéisation pour des fibres aléatoirement dispersées ayant des rapports de forme élevés [Communication écrite]. 17es Journées nationales sur les composites (JNC 2011), Poitiers-Futuroscope, France. Lien externe
Mureithi, N. W., & Masabarakiza, C. (juillet 2011). Determination of Flow Structure in a Tube Array by Particle Image Velocimetry [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2011), Baltimore, MD, USA. Lien externe
Murphy, G. B., Kummert, M., Anderson, B. R., & Counsell, J. (2011). A comparison of the UK Standard Assessment Procedure and detailed simulation of solar energy systems for dwellings. Journal of Building Performance Simulation, 4(1), 75-90. Lien externe
Nafi, A. (2011). Vérification et diagnostic des machines à mesurer tridimensionnelles avec découplage machine et palpeur. [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Nafi, A., & Mayer, J. R. R. (juillet 2011). Probing variance separation on coordinate measuring machines [Communication écrite]. World Congress on Engineering (WCE 2011), London, United kingdom. Lien externe
Nafi, A., Mayer, J. R. R., & Wozniak, A. (2011). Novel CMM-based implementation of the multi-step method for the separation of machine and probe errors. Precision Engineering, 35(2), 318-328. Lien externe
Noriega, H. N. (2011). Convection naturelle de nanofluides par la méthode de Boltzmann sur réseau. [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Pahlavanpour, M., Hubert, P., & Lévesque, M. (juin 2011). Modèles d'homogénéisation pour des nanocomposites à base de nanoargiles [Communication écrite]. 17es Journées nationales sur les composites (JNC 2011), Poitiers-Futuroscope, France. Lien externe
Pahlavanpour, M., Hubert, P., & Lévesque, M. (septembre 2011). Multiscale modeling of polymer-clay nanocomposites : interphase and homogenization methods [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Lien externe
Paquette, S. (2011). Vérification du logiciel CFX pour la simulation de l'interaction arc-écoulement dans les disjoncteurs haute-tension. [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Perrot, E. (2011). Forces d'excitation vibratoire dans un faisceau de tubes en configuration triangulaire normale soumis à un écoulement diphasique. [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Perrot, E. S., Mureithi, N. W., Pettigrew, M. J., & Ricciardi, G. (juillet 2011). Vibration Excitation Forces in a Normal Triangular Tube Bundle Subjected to Two-Phase Cross Flow [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2011), Baltimore, MD, USA. Lien externe
Petrissans, A., Chaouch, M., Gerardin, P., Petrissans, M., & Younsi, R. (juillet 2011). Kinetics modeling of wood torrefaction: Weight loss kinetics [Communication écrite]. 1st International Conference on Simulation and Modeling Methodologies, Technologies and Applications (SIMULTECH 2011), Noordwijkerhout, Netherlands. Non disponible
Petrissans, A., Younsi, R., Chaouch, M., Gerardin, P., & Petrissans, M. (2011). Experimental and numerical analysis of wood thermodegradation - Mass loss kinetics. Journal of Thermal Analysis and Calorimetry, 109(2), 1-8. Lien externe
Pettigrew, M. J., Rogers, R. J., & Axisa, F. (2011). Damping of heat exchanger tubes in liquids: review and design guidelines. Journal of Pressure Vessel Technology, 133(1), 014002-014002. Lien externe
Phan, P., Mezghani, N., Aubin, C.-É., de Guise, J., & Labelle, H. (2011). Computer algorithms and applications used to assist the evaluation and treatment of adolescent idiopathic scoliosis. European Spine Journal, 20(7), 1058-1068. Lien externe
Philippe, M., Bernier, M., Marchio, D., & Lopez, S. (2011). A semi-analytical model for serpentine horizontal ground heat exchangers. International journal of heating, ventilating, air-conditioning, and refrigeration research, 17(6), 1044-1058. Lien externe
Pouponneau, P., Savadogo, O., Napporn, T., Yahia, L., & Martel, S. (2011). Corrosion study of single crystal Ni-Mn-Ga alloy and Tb₀.₂₇Dy₀.₇₃Fe₁.₉₅ alloy for the design of new medical microdevices. Journal of Materials Science: Materials in Medicine, 22(2), 237-245. Lien externe
Rahmani, B., Villemure, I., & Lévesque, M. (septembre 2011). Elastic properties identification of planar composite materials based on finite element model updating and a hybrid optimization algorithm [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Lien externe
Raison, M., Detrembleur, C., Fisette, P., & Samin, J.-C. (juin 2023). Assessment of antagonistic muscle forces during foream flexion/extention [Communication écrite]. ECCOMAS Multibody Dynamics Conference, Warsaw, Pologne. Lien externe
Recuerda, M., Cote, S.-P., Villemure, I., & Périé-Curnier, D. (2011). Influence of experimental protocols on the mechanical properties of the intervertebral disc in unconfined compression. Journal of Biomechanical Engineering, 133(7), 071006-071006. Lien externe
Redouane, R., & Lakis, A. A. (juillet 2011). Dynamic behavior of cylindrical shells subjected to nonlinearities of fluid flow [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2011), Baltimore, Maryland. Non disponible
Remery, M. (2011). Nouvelle méthode d'évaluation des scénarios de fin de vie pour des produits en phase de conception préliminaire. [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Remery, M., Mascle, C., & Agard, B. (octobre 2011). Une méthode d'évaluation des scénarios de fin de vie pour des produits en phase de conception préliminarie [Communication écrite]. 9e Congrès international de génie industriel (CIGI 2011), St-Sauveur, Québec. Lien externe
Ren, Q., Balazinski, M., Baron, L., & Jemielniak, K. (2011). TSK fuzzy modeling for tool wear condition in turning processes: An experimental study. Engineering Applications of Artificial Intelligence, 24(2), 260-265. Lien externe
Ren, Q., Baron, L., & Balazinski, M. (2011). Type-2 fuzzy modeling for acoustic emission signal in precision manufacturing. Modelling and Simulation in Engineering, 2011, 1-12. Disponible
Ricciardi, G., Pettigrew, M. J., & Mureithi, N. W. (2011). Fluidelastic instability in a normal triangular tube bundle subjected to air-water cross-flow. Journal of Pressure Vessel Technology, 133(6). Lien externe
Rigaud, M. (2011). Metallurgical/materials engineering education in Canada at École Polytechnique. Dans The Canadian metallurgical and materials landscape 1960 to 2011 (p. 37-39). Non disponible
Ruiz, E., & Trochu, F. (2011). Flow modeling in compoiste reinforcements. Dans Boisse, P. (édit.), Research and Markets: Composite Reinforcements for Optimum Performance (p. 588-615). Lien externe
Ruiz, E., Billotte, C., Morin, B. F., Cara, F., & Baurier, H. (août 2011). Chemical shrinkage and thermomechanical characterization of an epoxy resin during cure by a novel in situ measurement method [Communication écrite]. 18th International Conference on Composite Materials (ICCM 2011), Jeju Island, Korea. Lien externe
Sabri, F., & Lakis, A. A. (2011). Effects of sloshing on flutter prediction of partially liquid-filled circular cylindrical shell. Journal of Aircraft, 48(6), 1829-1839. Lien externe
Sabri, F., & Lakis, A. A. (2011). Hydroelastic vibration of partially liquid-filled circular cylindrical shells under combined internal pressure and axial compression. Aerospace Science and Technology, 15(4), 237-248. Lien externe
Sabri, F., Meguid, S. A., Lakis, A. A., & Tan, K. (juin 2011). Aeroelastic behavior of a novel morphing wing using shape memory alloys [Communication écrite]. 15th International Forum on Aeroelasticity and Structural Dynamics (IFASD 2011), Paris, France. Non disponible
Saeed, F., Paraschivoiu, I., Trifu, O., Hess, M., & Gabrys, C. (2011). Inverse airfoil design method for low-speed straight-bladed Darrieus-type VAWT applications. Wind Engineering, 35(3), 357-368. Lien externe
Sagol, E., Reggio, M., & Ilinca, A. (avril 2011). 3D CFD assessment of the performance characteristics of the NREL phase VI experimental wind turbine [Communication écrite]. 19th Annual Conference of the CFD Society of Canada, Montréal, Québec. Non disponible
Sawadogo, T., & Mureithi, N. W. (juillet 2011). Simulation of the Vibration of a Steam Generator Tube Subjected to Fluidelastic Forces Induced by Two-Phase Cross-Flow [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2011), Baltimore, MD, USA. Lien externe
Schmidt, H., Galbusera, F., Wilke, H.-J., & Shirazi-Adl, A. (2011). Remedy for fictive negative pressures in biphasic finite element models of the intervertebral disc during unloading. Computer Methods in Biomechanics and Biomedical Engineering, 14(3), 293-303. Lien externe
Senez, H., & Étienne, S. (juillet 2011). Development of a Numerical Model to Represent Two-Phase Flow Configurations in a Tube Bundle [Communication écrite]. ASME Pressure Vessels and Piping Conference (Pvp-2011), Baltimore, MD, USA. Lien externe
Séoud, L., Cheriet, F., Labelle, H., & Dansereau, J. (2011). A novel method for the 3-D reconstruction of scoliotic ribs from frontal and lateral radiographs. IEEE Transactions on Biomedical Engineering, 58(5), 1135-1146. Lien externe
Sergerie, K., Parent, S., Beauchemin, P. F., Londono, I., Moldovan, F., & Villemure, I. (2011). Growth plate explants respond differently to in vitro static and dynamic loadings. Journal of Orthopaedic Research, 29(4), 473-480. Lien externe
Shi, L., Wang, D., Driscoll, M., Villemure, I., Chu, W. C., Cheng, J. C., & Aubin, C.-É. (2011). Biomechanical analysis and modeling of different vertebral growth patterns in adolescent idiopathic scoliosis and healthy subjects. Scoliosis, 6(1), 11. Disponible
Siles, C., Baptiste, P., & Mascle, C. (mai 2011). Decision support in the management of end-of-life aircraft/Resource planning in the industry of end-of-life aircraft? [Communication écrite]. International Conference on Industrial Engineering and Systems Management (IESM 2011), Metz, France. Non disponible
Slamani, M., Mayer, J. R. R., & Cloutier, G. (2011). Modeling and experimental validation of machine tool motion errors using degree optimized polynomial including motion hysteresis. Experimental Techniques, 35(1), 37-44. Lien externe
Sola, M. (2011). Caractérisation de matériaux composites à structure sandwich comportant des modifications. [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Spitler, J., & Bernier, M. (2011). Ground-source heat pump systems : the first century and beyond. International journal of heating, ventilating, air-conditioning, and refrigeration research, 17(6), 891-894. Lien externe
Stoeffler, K., Lafleur, P., Perrin-Sarazin, F., Bureau, M., & Denault, J. (2011). Micro-mechanisms of deformation in polyethylene/clay micro- and nanocomposites. Composites Part A: Applied Science and Manufacturing, 42(8), 916-927. Lien externe
Sy, M., & Mascle, C. (2011). Product design analysis based on life cycle features. Journal of Engineering Design, 22(6), 387-406. Lien externe
Tam, S. K., Bilodeau, S., Dusseault, J., Langlois, G., Halle, J.-P., & Yahia, L. (2011). Biocompatibility and physicochemical characteristics of alginate-polycation microcapsules. Acta Biomaterialia, 7(4), 1683-92. Lien externe
Tam, S. K., Dusseault, J., Bilodeau, S., Langlois, G., Halle, J.-P., & Yahia, L. (2011). Factors influencing alginate gel biocompatibility. Journal of Biomedical Materials Research. Part A, 98 A(1), 40-52. Lien externe
Thomassin, J., Vo, H. D., & Mureithi, N. W. (2011). The tip clearance flow resonance behind axial compressor nonsynchronous vibration. Journal of Turbomachinery, 133(4). Lien externe
Torry-Smith, J. M., Achiche, S., Mortensen, N. H., Qamar, A., Wikander, J., & During, C. (août 2011). Mechatronic Design - Still a Considerable Challenge [Communication écrite]. ASME 2011 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Washington, D.C.. Lien externe
Toussaint, K. (2011). Caractérisation de l'écoulement d'air dans une maquette d'alternateur hydroélectrique par méthodes numérique et expérimentale [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Toussaint, K., Torriano, F., Morissette, J.-F., & Reggio, M. (juillet 2011). CFD analysis of ventilation flow for a scale model hydro-generator [Communication écrite]. ASME 2011 Power Conference, Denver, Colorado, USA. Lien externe
Trépanier, J.-Y., Melot, M., Camarero, R., & Petro, E. (2011). Comparison of two models for radiative heat transfer in high temperature thermal plasmas. Modelling and Simulation in Engineering, 2011, 1-7. Lien externe
Trochu, F., Chatel, S., Maison - Le Poëc, S., Benoit, Y., De Luca, P., Baisch, P., Roger, D., & Guerin, P. (octobre 2011). Skills synergy leading to RTM flow simulation success story [Communication écrite]. SAE AeroTech Congress and Exhibition (AEROTECH 2011), Toulouse, France. Lien externe
Turcan, G. O. (2011). Sensibilité des métaux ferreux à l'effet d'entaille en fatigue [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Valteau, B., Grimard, G., Londono, I., Moldovan, F., & Villemure, I. (2011). In vivo dynamic bone growth modulation is less detrimental but as effective as static growth. Bone, 49(5), 996-1004. Lien externe
Valteau, B., Grimard, G., Londono, I., Moldovan, F., & Villemure, I. (mai 2011). In vivo dynamic bone growth modulation is less detrimetnal but as effective as static growth modulation [Communication écrite]. 17th Annual Canadian Connective Tissue Conference, Montréal, Québec. Non disponible
Valteau, B., Grimard, G., Londono, I., Moldovan, F., & Villemure, I. (mai 2011). La modulation de croissance dynamique in vivo est moins dommageable pour la plaque de croissance que la modulation de croissance statique [Communication écrite]. 31e journée de la recherche de POES et de la division d'orthopédie de l'Université de Montréal, Québec, Canada. Non disponible
Vasilevskiy, D., Bourbia, O., Gosselin, S., Turenne, S., & Masut, R. A. (2011). Nanostructure characterization of bismuth telluride-based powders and extruded alloys by various experimental methods. Journal of Electronic Materials, 40(5), 1046-1051. Lien externe
Versailles, P., Ghosh, S., Vo, H. D., & Masson, C. (2011). Preliminary assessment of wind turbine blade lift control via plasma actuation. Wind Engineering, 35(3), 339-356. Lien externe
Vétel, J., Garon, A., & Pelletier, D. (2011). Denoising methods for time-resolved PIV measurements. Experiments in Fluids, 51(4), 893-916. Lien externe
Villalpando, F., Reggio, M., & Ilinca, A. (2011). Assessment of turbulence models for flow simulation around a wind turbine airfoil. Modelling and Simulation in Engineering, 2011, 1-8. Disponible
Vu, V. H., Thomas, M., Lakis, A. A., & Marcouiller, L. (2011). Operational modal analysis by updating autoregressive model. Mechanical Systems and Signal Processing, 25(3), 1028-1044. Lien externe
Vu, V.-H., Thomas, M., Lakis, A. A., & Marcouiller, L. (2011). Spectrum and operational modal analysis with vector autoregressive models. Dans Mechanical Vibrations: Types, Testing and Analysis (p. 57-93). Non disponible
Wagnac, E., Arnoux, P.-J., Garo, A., El-Rich, M., & Aubin, C.-É. (2011). Calibration of hyperelastic material properties of the human lumbar intervertebral disc under fast dynamic compressive loads. Journal of Biomechanical Engineering, 133(10), 101007-101007. Lien externe
Wang, X., Aubin, C.-É., Crandall, D., & Labelle, H. (2011). Biomechanical comparison of force levels in spinal instrumentation using monoaxial versus multi degree of freedom post-loading pedicle screws. Spine, 36(2), E95-E104. Lien externe
Wang, X., Aubin, C.-É., Crandall, D., & Labelle, H. (2011). Biomechanical modeling and analysis of a direct incremental segmental translation system for the instrumentation of scoliotic deformities. Clinical Biomechanics, 26(6), 548-555. Lien externe
Wang, X., Aubin, C.-É., Labelle, H., Crandall, D., & Parent, S. (octobre 2011). Analysis of corrective forces for spinal instrumentation using three types of pedicle screws [Communication écrite]. EuroSpine 2011, Milan, Italy. Non disponible
Wang, X., Aubin, C.-É., Labelle, H., Crandall, D., & Parent, S. (octobre 2011). Biomechanical study of screw forces in spinal instrumentation for scoliosis treatment [Communication écrite]. 41e Réunion annuelle de la Société de scoliose du Québec, Québec, QC. Non disponible
Wang, X., Aubin, C.-É., Labelle, H., Crandall, D., & Stefan, P. (juillet 2011). Biomechanical Effectiveness of Three Types of Pedicle Screws for the Spinal Instrumentation of Adolescent Idiopathic Scoliosis [Communication écrite]. 18th International Meeting on Advanced Spine Techniques (IMAST 2011), Copenhagen, Denmark. Lien externe
Xu, X. (2011). Plasma Actuation for Boundary Layer Separation Control in Engine Ducts [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Zeinali-Davarani, S., Shirazi-Adl, A., Dariush, B., Hemami, H., & Parnianpour, M. (2011). The effect of resistance level and stability demands on recruitment patterns and internal loading of spine in dynamic flexion and extension using a simple trunk model. Computer Methods in Biomechanics and Biomedical Engineering, 14(7), 645-656. Lien externe
Zhang, L., Boukas, E.-K., Shi, P., & Chen, Z. (2011). A -dependent approach to H control of uncertain switched linear systems with average dwell time. Optimal Control Applications and Methods, 32(1), 15-27. Lien externe
Zhang, L., Zhang, L., Marchand, L., & Pierre, S. (2011). A survey of IP layer mobility maangement protocols in next-generation wireless networks. Dans Next generation mobile networks and ubiquitous computing (p. 1-16). Lien externe
Zhang, X., Baron, L., Liu, Q., & Boukas, E.-K. (2011). Design of stabilizing controllers with a dynamic gain for feedforward nonlinear time-delay systems. IEEE Transactions on Automatic Control, 56(3), 692-697. Lien externe
Zhang, X., Clime, L., Roberge, H., Normandin, F., Yahia, L., Sacher, E., & Veres, T. (2011). PH-triggered doxorubicin delivery based on hollow nanoporous silica nanoparticles with free-standing superparamagnetic Fe3O4 cores. Journal of Physical Chemistry C, 115(5), 1436-1443. Lien externe
Zhang, X., Liu, Q., Baron, L., & Boukas, E.-K. (2011). Feedback stabilization for high order feedforward nonlinear time-delay systems. Automatica, 47(5), 962-967. Lien externe
Zineddine, A., & Vasseur, P. (2011). Natural convection in a horizontal annular porous cavity saturated by a binary mixture. Lien externe
