 | Monter d'un niveau |
Alloui, Z., Fekri, M., Beji, H., & Vasseur, P. (2008). Natural Convection in a Horizontal Binary Fluid Layer Bounded by Thin Porous Layers. International Journal of Heat and Fluid Flow, 29(4), 1154-1163. Lien externe
Arjmand, N., Shirazi-Adl, A., & Pamianpour, M. (2008). Relative Efficiency of Abdominal Muscles in Spine Stability. Computer Methods in Biomechanics and Biomedical Engineering, 11(3), 291-299. Lien externe
Arjmand, N., Shirazi-Adl, A., & Parnianpour, M. (2008). Trunk Biomechanics During Maximum Isometric Axial Torque Exertions in Upright Standing. Clinical Biomechanics, 23(8), 969-978. Lien externe
Arjmand, N., Shirazi-Adl, A., Bazrgari, B., & Parnianpour, M. (2008). Application of a kinematics-driven approach in human spine biomechanics during an isometric lift. Scientia Iranica, 15(5), 596-612. Lien externe
Assawinchaichote, W., Nguang, S. K., Shi, P., & Boukas, E.-K. (2008). H-Infinity Fuzzy State-Feedback Control Design for Nonlinear Systems With D-Stability Constraints: an Lmi Approach. Mathematics and Computers in Simulation, 78(4), 514-531. Lien externe
Aubin, C.-É., Labelle, H., Chevrefils, C., Desroches, G., Clin, J., & Boivin, A. (2008). Preoperative Planning Simulator for Spinal Deformity Surgeries. Spine, 33(20), 2143-2152. Lien externe
Barello, R. B., & Lévesque, M. (2008). Comparison Between the Relaxation Spectra Obtained From Homogenization Models and Finite Elements Simulation for the Same Composite. International Journal of Solids and Structures, 45(3-4), 850-867. Lien externe
Bazrgari, B., Shirazi-Adl, A., & Kasra, M. (2008). Computation of Trunk Muscle Forces, Spinal Loads and Stability in Whole-Body Vibration. Journal of Sound and Vibration, 318(4-5), 1334-1347. Lien externe
Bazrgari, B., Shirazi-Adl, A., & Kasra, M. (2008). Seated Whole Body Vibrations With High-Magnitude Accelerations - Relative Roles of Inertia and Muscle Forces. Journal of Biomechanics, 41(12), 2639-2646. Lien externe
Bazrgari, B., Shirazi-Adl, A., Trottier, M., & Mathieu, P. (2008). Computation of Trunk Equilibrium and Stability in Free Flexion-Extension Movements at Different Velocities. Journal of Biomechanics, 41(2), 412-421. Lien externe
Ben Daly, H., Hfaied, N., Zidi, M., Guelorget, B., & Boukhili, R. (2008). Nanoindentation of Dry and Aged Pultruded Composites Containing Fillers and Low Profile Additives. Polymer Composites, 29(11), 1218-1226. Lien externe
Bernier, M. (2008). Long-term ground temperature changes in geo-exchange systems. ASHRAE Transactions, 114(2), 342-350. Non disponible
Bey-Oueslati, R., Palm, S. J., Therriault, D., & Martel, S. (2008). High speed direct-write for rapid fabrication of three-dimensional microfluidic devices. International Journal of Heat and Technology, 26(1), 125-131. Lien externe
Biaou, A. L., & Bernier, M. (2008). Achieving Total Domestic Hot Water Production With Renewable Energy. Building and Environment, 43(4), 651-660. Lien externe
Bilgen, E., & Bakeka, B. J. D. (2008). Solar Collector Systems to Provide Hot Air in Rural Applications. Renewable Energy, 33(7), 1461-1468. Lien externe
Bilgen, E., & Balkaya, A. (2008). Natural Convection on Discrete Heaters in a Square Enclosure With Ventilation Ports. International Journal of Heat and Fluid Flow, 29(4), 1182-1189. Lien externe
Bilgen, E., & Muftuoglu, A. (2008). Cooling Strategy by Mixed Convection of a Discrete Heater at Its Optimum Position in a Square Cavity With Ventilation Ports. International Communications in Heat and Mass Transfer, 35(5), 545-550. Lien externe
Bilgen, E., & Muftuoglu, A. (2008). Natural Convection in an Open Square Cavity With Slots. International Communications in Heat and Mass Transfer, 35(8), 896-900. Lien externe
Borazghi, H., Trudel-Boucher, D., Denault, J., & Fisa, B. (2008). Continuous Consolidation of Polypropylene/Glass Fibre Commingled Fabric. Polymers & Polymer Composites, 16(1), 1-8. Lien externe
Boukas, E.-K. (2008). On Stability and Stabilisation of Continuous-Time Singular Markovian Switching Systems. IET Control Theory and Applications, 2(10), 884-894. Lien externe
Boukas, E.-K. (2008). On State Feedback Stabilization of Singular Systems With Random Abrupt Changes. Journal of Optimization Theory and Applications, 137(2), 335-345. Lien externe
Boukas, E.-K., & M'Sirdi, N. K. (2008). Stabilization of linear systems via delayed state feedback controller. ICIC Express Letters, 2(1), 1-6. Non disponible
Boukas, E.-K., & Xia, Y. (2008). Descriptor Discrete-Time Systems With Random Abrupt Changes: Stability and Stabilisation. International Journal of Control, 81(8), 1311-1318. Lien externe
Bouzidane, A., Thomas, M., & Lakis, A. A. (2008). Nonlinear dynamic behavior of a rigid rotor supported by hydrostatic squeeze film dampers. Journal of Tribology, 130(4). Lien externe
Bruneaux, J., Therriault, D., & Heuzey, M.-C. (2008). Micro-Extrusion of Organic Inks for Direct-Write Assembly. Journal of Micromechanics and Microengineering, 18(11), 115020-115020. Lien externe
Burlat, M., Julien, D., Lévesque, M., Bui-Quoc, T., & Bernard, M. (2008). Effect of Local Cold Working on the Fatigue Life of 7475-T7351 Aluminium Alloy Hole Specimens. Engineering Fracture Mechanics, 75(8), 2042-2061. Lien externe
Calatoru, V. D., Balazinski, M., Mayer, J. R. R., Paris, H., & L'Espérance, G. (2008). Diffusion Wear Mechanism During High-Speed Machining of 7475-T7351 Aluminum Alloy With Carbide End Mills. Wear, 265(11-12), 1793-1800. Lien externe
Campbell, M., Bureau, M., & Yahia, L. (2008). Performance of Cf/Pa12 Composite Femoral Stems. Journal of Materials Science-Materials in Medicine, 19(2), 683-693. Lien externe
Campbell, M., Denault, J., Yahia, L., & Bureau, M. (2008). Cf/Pa12 Composite Femoral Stems: Manufacturing and Properties. Composites Part A: Applied Science and Manufacturing, 39(5), 796-804. Lien externe
Chatelain, J.-F., Roy, R., & Mayer, J. R. R. (2008). Development of a spiral trajectory for high speed roughing of light alloy aerospace components. WSEAS Transactions on Applied and Theoretical Mechanics, 3(3), 83-93. Lien externe
Crawley, D. B., Hand, J. W., Kummert, M., & Griffith, B. T. (2008). Contrasting the capabilities of building energy performance simulation programs. Building and Environment, 43(4), 661-673. Lien externe
Dimitrievska, S., Petit, A., Ajji, A., Bureau, M., & Yahia, L. (2008). Biocompatibility of Novel Polymer-Apatite Nanocomposite Fibers. Journal of Biomedical Materials Research. Part A, 84A(1), 44-53. Lien externe
Dolez, P. I., Nohile, C., Anh, T. H., Vu-Khanh, T., Benoit, R., & Bellavigna-Ladoux, O. (2008). Exploring the Chemical Aspects of Truck Tire Blowouts and Explosions. Safety Science, 46(9), 1334-1344. Lien externe
Duke, K., Aubin, C.-É., Dansereau, J., & Labelle, H. (2008). Computer Simulation for the Optimization of Patient Positioning in Spinal Deformity Instrumentation Surgery. Medical & Biological Engineering & Computing, 46(1), 33-41. Lien externe
El-Rich, M., Wagnac, E. L., Amoux, P.-J., & Aubin, C.-É. (2008). Detailled modelling of the lumbar spine for trauma applications : preliminary results. Computer Methods in Biomechanics and Biomedical Engineering, 11(1), 94-94. Lien externe
Esmailzadeh, M., Lakis, A. A., Thomas, M., & Marcouiller, L. (2008). Three-dimensional modeling of curved structures containing and/or submerged in fluid. Finite Elements in Analysis and Design, 44(6-7), 334-345. Lien externe
Garo, A., Amoux, P.-J., & Aubin, C.-É. (2008). Considerations in the finite element modelling of vertebrae in children and adults : a preliminary study. Computer Methods in Biomechanics and Biomedical Engineering, 11(1), 99-100. Lien externe
Ghafar-Zadeh, E., Sawan, M., & Therriault, D. (2008). A 0.18-μm CMOS capacitive sensor Lab-on-Chip. Sensors and Actuators A: Physical, 141(2), 454-462. Lien externe
Ghafar-Zadeh, E., Sawan, M., Therriault, D., & Miled, A. (2008). Laboratoires-sur-puces: Une nouvelle technologie de diagnostic cellulaire et moléculaire. Lien externe
Hajj-Hassan, M., Gonzalez, T., Ghafar-Zadeh, E., Djeghelian, H., Chodavarapu, V., Andrews, M., & Therriault, D. (2008). Direct-Dispense Polymeric Waveguides Platform for Optical Chemical Sensors. Sensors, 8(12), 7636-7648. Disponible
Hassan, M. F., & Boukas, E.-K. (2008). Constrained Linear Quadratic Regulator: Continuous-Time Case. Nonlinear dynamics and systems theory, 8(1), 35-42. Lien externe
Hassani, S., Bielawski, M., Beres, W., Martinu, L., Balazinski, M., & Sapieha, J.-E. (2008). Predictive Tools for the Design of Erosion Resistant Coatings. Surface and Coatings Technology, 203(3-4), 204-210. Lien externe
Hassani, S., Sapieha, J.-E., Bielawski, M., Beres, W., Martinu, L., & Balazinski, M. (2008). Design of Hard Coating Architecture for the Optimization of Erosion Resistance. Wear, 265(5-6), 879-887. Lien externe
Hébert, A. (2008). A Raviart-Thomas-Schneider Solution of the Diffusion Equation in Hexagonal Geometry. Annals of Nuclear Energy, 35(3), 363-376. Lien externe
Hébert, A. (2008). Scattering Reduction of the Double-Heterogeneity Treatment in Dragon. Nuclear Science and Engineering, 160(2), 261-266. Lien externe
Hébert, A. (2008). A Simplified Presentation of the Multigroup Analytic Nodal Method in 2-D Cartesian Geometry. Annals of Nuclear Energy, 35(11), 2142-2149. Lien externe
Huo, L., & Baron, L. (2008). The Joint-Limits and Singularity Avoidance in Robotic Welding. Industrial Robot, 35(5), 456-464. Lien externe
Ilinca, F., & Pelletier, D. (2008). Nodal Velocity Derivatives of Finite Element Solutions: the Find Method for Incompressible Navier-Stokes Equations. International Journal for Numerical Methods in Engineering, 76(4), 455-481. Lien externe
Jolly, P., & Marchand, L. (2008). A 3D regression surface for the room temperature tightness gasket data reduction and bolt load design. International Journal of Pressure Vessels and Piping, 85(7), 441-449. Lien externe
Karthikeyan, R., & Hébert, A. (2008). Performance of Advanced Self-Shielding Models in Dragon Version4 on Analysis of a High Conversion Light Water Reactor Lattice. Annals of Nuclear Energy, 35(5), 963-975. Lien externe
Kerboua, Y., Lakis, A. A., Thomas, M., & Marcouiller, L. (2008). Computational Modeling of Coupled Fluid-Structure Systems With Applications. Structural Engineering and Mechanics, 29(1), 91-111. Lien externe
Kerboua, Y., Lakis, A. A., Thomas, M., & Marcouiller, L. (2008). Modelling of plates subjected to flowing fluid under various boundary conditions. Engineering Applications of Computational Fluid Mechanics, 2(4), 525-539. Lien externe
Kerboua, Y., Lakis, A. A., Thomas, M., & Marcouiller, L. (2008). Vibration analysis of rectangular plates coupled with fluid. Applied Mathematical Modelling, 32(12), 2570-2586. Lien externe
Khoukhi, A., Baron, L., Balazinski, M., & Demirli, K. (2008). A Hierarchical Neuro-Fuzzy System to Near Optimal-Time Trajectory Planning of Redundant Manipulators. Engineering Applications of Artificial Intelligence, 21(7), 974-984. Lien externe
Kuhn, M., Napporn, T. W., Meunier, M., & Therriault, D. (2008). Experimental Study of Current Collection in Single-Chamber Micro Solid Oxide Fuel Cells With Comblike Electrodes. Journal of The Electrochemical Society, 155(10), B994-B1000. Lien externe
Kuhn, M., Napporn, T., Meunier, M., Therriault, D., & Vengallatore, S. (2008). Fabrication and Testing of Coplanar Single-Chamber Micro Solid Oxide Fuel Cells With Geometrically Complex Electrodes. Journal of Power Sources, 177(1), 148-153. Lien externe
Kuhn, M., Napporn, T., Meunier, M., Vengallatore, S., & Therriault, D. (2008). Direct-Write Microfabrication of Single-Chamber Micro Solid Oxide Fuel Cells. Journal of Micromechanics and Microengineering, 18(1), 015005. Lien externe
Kummert, M., & Bernier, M. (2008). Analysis of a combined photovoltaic-geothermal gas-fired absorption heat pump system in a canadian climate. Journal of building performance stimulation, 1(4), 245-256. Lien externe
Kummert, M., & Bernier, M. (2008). Sub-hourly simulation of residential ground coupled heat pump systems. Building Services Engineering Research & Technology, 29(1), 27-44. Lien externe
Le Tellier, R., & Hébert, A. (2008). Anisotropy and Particle Conservation for Trajectory-Based Deterministic Methods. Nuclear Science and Engineering, 158(1), 28-39. Lien externe
Le Tellier, R., Hébert, A., Santamarina, A., & Litaize, O. (2008). A Modeling of Bwr-Mox Assemblies Based on the Characteristics Method Combined With Advanced Self-Shielding Models. Nuclear Science and Engineering, 158(3), 231-243. Lien externe
Le Tellier, R., Marleau, G., Dahmani, M., & Hébert, A. (2008). Improvements of the Reactivity Devices Modeling for the Advanced CANDU Reactor. Annals of Nuclear Energy, 35(5), 868-876. Lien externe
Leclerc, J. S., & Ruiz, E. (2008). Porosity reduction using optimized flow velocity in resin transfer molding. Composites Part A: Applied Science and Manufacturing, 39(12), 1859-68. Lien externe
Leray, D., Vadean, A., & Daidie, A. (2008). Fast Computation of Preloaded Bolted Circular Joint Aiming at Fatigue Bolt Sizing - Hypotheses and Modeling. Engineering Computations, 25(1-2), 42-54. Lien externe
Lévesque, M., Derrien, K., Baptiste, D., & Gilchrist, M. D. (2008). Erratum: On the development and parameter identification of Schapery-type constitutive theories. Mechanics of Time-Dependent Materials, 12(3), 273-274. Lien externe
Lévesque, M., Derrien, K., Baptiste, D., & Gilchrist, M. D. (2008). On the Development and Parameter Identification of Schapery-Type Constitutive Theories. Mechanics of Time-Dependent Materials, 12(2), 95-127. Lien externe
Longtin, R., Fauteux, C., Carignan, L. P., Therriault, D., & Pegna, J. (2008). Laser-Assisted Synthesis of Carbon Nanofibers: From Arrays to Thin Films and Coatings. Surface and Coatings Technology, 202(12), 2661-2669. Lien externe
Mahmoud, M. S., Boukas, E.-K., & Ismail, A. (2008). Robust Adaptive Control of Uncertain Discrete-Time State-Delay Systems. Computers & Mathematics With Applications, 55(12), 2887-2902. Lien externe
Mahmoud, M. S., Boukas, E.-K., & Shi, P. (2008). Resilient Feedback Stabilization of Discrete-Time Systems With Delays. IMA Journal of Mathematical Control and Information, 25(2), 141-156. Lien externe
Mahmoud, M. S., Shi, P., Boukas, E.-K., & Jain, L. (2008). Simultaneous H-2/H-Infinity Control of Uncertain Jump Systems With Functional Time-Delays. International Journal of Robust and Nonlinear Control, 18(3), 296-318. Lien externe
Mahvash, A., & Ross, A. (2008). Application of Chmms to Two-Phase Flow Pattern Identification. Engineering Applications of Artificial Intelligence, 21(8), 1144-1152. Lien externe
Mahvash, A., & Ross, A. (2008). Two-Phase Flow Pattern Identification Using Continuous Hidden Markov Model. International Journal of Multiphase Flow, 34(3), 303-311. Lien externe
Martel, S., Mathieu, J.-B., Felfoul, O., Chanu, A., Aboussouan, É., Tamaz, S., Pouponneau, P., Yahia, L., Beaudoin, G., Soulez, G., & Mankiewicz, M. (2008). A computer-assisted protocol for endovascular target interventionsusing a clinical mri system for controlling untethered microdevices andfuture nanorobots. Computer Aided Surgery, 13(6), 340-352. Lien externe
Martin, A., Reggio, M., & Trépanier, J.-Y. (2008). Numerical Solution of Axisymmetric Multi-Species Compressible Gas Flow: Towards Improved Circuit Breaker Simulation. International Journal of Computational Fluid Dynamics, 22(4), 259-271. Lien externe
Mascle, C., & Zhao, H. P. (2008). Integrating Environmental Consciousness in Product/Process Development Based on Life-Cycle Thinking. International Journal of Production Economics, 112(1), 5-17. Lien externe
Mesfar, W., & Shirazi-Adl, A. (2008). Computational Biomechanics of Knee Joint in Open Kinetic Chain Extension Exercises. Computer Methods in Biomechanics and Biomedical Engineering, 11(1), 55-61. Lien externe
Mesfar, W., & Shirazi-Adl, A. (2008). Knee Joint Biomechanics in Open-Kinetic-Chain Flexion Exercises. Clinical Biomechanics, 23(4), 477-482. Lien externe
Muftuoglu, A., & Bilgen, E. (2008). Conjugate Heat Transfer in Open Cavities With a Discrete Heater at Its Optimized Position. International Journal of Heat and Mass Transfer, 51(3-4), 779-788. Lien externe
Muftuoglu, A., & Bilgen, E. (2008). Heat Transfer in Inclined Rectangular Receivers for Concentrated Solar Radiation. International Communications in Heat and Mass Transfer, 35(5), 551-556. Lien externe
Muftuoglu, A., & Bilgen, E. (2008). Natural Convection in an Open Square Cavity With Discrete Heaters at Their Optimized Positions. International Journal of Thermal Sciences, 47(4), 369-377. Lien externe
Nguyen-Quang, T. (2008). Onset of Gravitactic Bioconvection in a Square Anisotropic Porous Medium With Arbitrary Orientation of the Principal Axes. International Journal of Heat and Mass Transfer, 51(7-8), 1497-1504. Lien externe
Nguyen-Quang, T., Nguyen, H., & Lepalec, G. (2008). Gravitactic Bioconvection in a Fluid-Saturated Porous Medium With Double Diffusion. Journal of Porous Media, 11(8), 751-764. Lien externe
Nouanégué, H. F., Alandji, L. R., & Bilgen, E. (2008). Numerical Study of Solar-Wind Tower Systems for Ventilation of Dwellings. Renewable Energy, 33(3), 434-443. Lien externe
Nouanegue, H., Muftuoglu, A., & Bilgen, E. (2008). Conjugate heat transfer by natural convection, conduction and radiation in open cavities. International Journal of Heat and Mass Transfer, 51(25-26), 6054-6062. Lien externe
Oueslati, R. B., Therriault, D., & Martel, S. (2008). PCB-Integrated Heat Exchanger for Cooling Electronics Using Microchannels Fabricated With the Direct-Write Method. IEEE Transactions on Components and Packaging Technologies, 31(4), 869-874. Lien externe
Pandolfelli, V. C., & Rigaud, M. (2008). What does seduction have to do with refractory engineering education in the 21st century? Journal of the Technical Association of Refractories of Japan, 28(1), 2-7. Non disponible
Pelletier, D., Étienne, S., Hay, A., & Borggaard, J. (2008). The sensitivity equation in fluid mechanics. European Journal of Computational Mechanics, 17(1-2), 31-62. Lien externe
Pelletier, D., Hay, A., Étienne, S., & Borggaard, J. (2008). The sensitivity equation method in fluid mechanics. European Journal of Computational Mechanics, 17(1-2), 31-61. Lien externe
Pianet, G., & Arquis, E. (2008). Simulation of Particles in Fluid: a Two-Dimensional Benchmark for a Cylinder Settling in a Wall-Bounded Box. European Journal of Mechanics B-Fluids, 27(3), 309-321. Lien externe
Roy, J., Rouleau, A., Chouteau, M. C., & Bureau, M. (2008). Widespread Occurrence of Aquifers Currently Undetectable With the MRS Technique in the Grenville Geological Province, Canada. Journal of Applied Geophysics, 66(3-4), 82-93. Lien externe
Sangole, A. P., & Levin, M. F. (2008). Palmar Arch Dynamics During Reach-to-Grasp Tasks. Experimental Brain Research, 190(4), 443-452. Lien externe
Schmid, E. C., Aubin, C.-É., Moreau, A., Sarwark, J., & Parent, S. (2008). A Novel Fusionless Vertebral Physeal Device Inducing Spinal Growth Modulation for the Correction of Spinal Deformities. European Spine Journal, 17(10), 1329-1335. Lien externe
Scolan, Y.-M., & Étienne, S. (2008). On the Use of Conformal Mapping for the Computation of Hydrodynamic Forces Acting on Bodies of Arbitrary Shape in Viscous Flow. Part 1: Simply Connected Body. Journal of Engineering Mathematics, 60(2), 209-220. Lien externe
Scolan, Y.-M., & Étienne, S. (2008). On the Use of Conformal Mapping for the Computation of Hydrodynamic Forces Acting on Bodies of Arbitrary Shape in Viscous Flow. Part 2: Multi-Body Configuration. Journal of Engineering Mathematics, 61(1), 17-34. Lien externe
Shirazi, R., & Shirazi-Adl, A. (2008). Deep Vertical Collagen Fibrils Play a Significant Role in Mechanics of Articular Cartilage. Journal of Orthopaedic Research, 26(5), 608-615. Lien externe
Shirazi, R., Shirazi-Adl, A., & Hurtig, M. (2008). Role of cartilage collagen fibrils networks in knee joint biomechanics under compression. Journal of Biomechanics, 41(16), 3340-3348. Lien externe
Taheri, M., & Bilgen, E. (2008). Thermo-Bioconvection in a Suspension of Gravitactic Micro-Organisms in Vertical Cylinders. International Journal of Heat and Mass Transfer, 51(13-14), 3535-3547. Lien externe
Urquiza, J. M., N'Dri, K. D., Garon, A., & Delfour, M. C. (2008). Coupling Stokes and Darcy Equations. Applied Numerical Mathematics, 58(5), 525-538. Lien externe
Verreman, Y., & Limodin, N. (2008). Fatigue Notch Factor and Short Crack Propagation. Engineering Fracture Mechanics, 75(6), 1320-1335. Lien externe
Vétel, J., Garon, A., Pelletier, D., & Farinas, M.-I. (2008). Asymmetry and Transition to Turbulence in a Smooth Axisymmetric Constriction. Journal of Fluid Mechanics, 607, 351-386. Lien externe
Vo, H. D., Tan, C. S., & Greitzer, E. M. (2008). Criteria for spike initiated rotating stall. Journal of Turbomachinery, 130(1), 1-9. Lien externe
Wagnac, É. L., Aubin, C.-É., & Dansereau, J. (2008). A New Method to Generate a Patient-Specific Finite Element Model of the Human Buttocks. IEEE Transactions on Biomedical Engineering, 55(2), 774-783. Lien externe
Wang, X., Baron, L., & Cloutier, G. (2008). Topological and Geometrical Synthesis of Three-Degree-of-Freedom Fully Parallel Manipulators by Instantaneous Kinematics. Journal of Mechanical Design, 130(3), 032301 (8 pages). Lien externe
Wang, X., Baron, L., & Cloutier, G. (2008). Topology of Serial and Parallel Manipulators and Topological Diagrams. Mechanism and Machine Theory, 43(6), 754-770. Lien externe
Wang, Y., Guibault, F., & Camarero, R. (2008). Eikonal Equation-Based Front Propagation for Arbitrary Complex Configurations. International Journal for Numerical Methods in Engineering, 73(2), 226-247. Lien externe
Xia, Y., Zhang, J., & Boukas, E.-K. (2008). Control for Discrete Singular Hybrid Systems. Automatica, 44(10), 2635-2641. Lien externe
Zeinali-Davarani, S., Hemami, H., Barin, K., Shirazi-Adl, A., & Parnianpour, M. (2008). Dynamic Stability of Spine Using Stability-Based Optimization and Muscle Spindle Reflex. IEEE Transactions on Neural Systems and Rehabilitation Engineering, 16(1), 106-118. Lien externe
Zhang, C., Mureithi, N. W., & Pettigrew, M. J. (2008). Development of Models Correlating Vibration Excitation Forces to Dynamic Characteristics of Two-Phase Flow in a Tube Bundle. International Journal of Multiphase Flow, 34(11), 1048-1057. Lien externe
Zhang, C., Pettigrew, M. J., & Mureithi, N. W. (2008). Correlation Between Vibration Excitation Forces and the Dynamic Characteristics of Two-Phase Cross Flow in a Rotated-Triangular Tube Bundle. Journal of Pressure Vessel Technology, 130(1). Lien externe
Zhang, L. X., Boukas, E.-K., & Haidar, A. (2008). Delay-Range-Dependent Control Synthesis for Time-Delay Systems With Actuator Saturation. Automatica, 44(10), 2691-2695. Lien externe
Zhang, L. X., Boukas, E.-K., & Lam, J. (2008). Analysis and Synthesis of Markov Jump Linear Systems With Time-Varying Delays and Partially Known Transition Probabilities. IEEE Transactions on Automatic Control, 53(10), 2458-2464. Lien externe
Zhang, L. X., Boukas, E.-K., & Shi, P. (2008). Exponential H-Infinity Filtering for Uncertain Discrete-Time Switched Linear Systems With Average Dwell Time: a Mu-Dependent Approach. International Journal of Robust and Nonlinear Control, 18(11), 1188-1207. Lien externe
Zhang, L., Shi, P., & Basin, M. (2008). Robust Stability and Stabilisation of Uncertain Switched Linear Discrete Time-Delay Systems. IET Control Theory and Applications, 2(7), 606-614. Lien externe
Zhang, L., Shi, P., Boukas, E.-K., & Wang, C. (2008). H-Infinity Model Reduction for Uncertain Switched Linear Discrete-Time Systems. Automatica, 44(11), 2944-2949. Lien externe
Zhou, X., Sankaranarayanane, K., & Rigaud, M. (2008). Pumpable and shotcreting castable : a design through rheology. Refractories Engineer, 15-18. Non disponible
Zoabli, G., Mathieu, P. A., & Aubin, C.-É. (2008). Magnetic resonance imaging of the erector spinae muscle in Duchenne muscular dystrophy : implication for scoliotic deformities. Scoliosis, 29(3), 21-21. Lien externe
Badri, B., Thomas, M., Lakis, A. A., & Mureithi, N. W. (2008). Les vibrations en UHV. (Rapport technique). Non disponible
Boukas, E.-K., & M'Sirdi, N. K. (2008). Stabilization of Linear Systems via Delayed State Feedback Controller. (Rapport technique n° G-2008-16). Lien externe
Bui-Quoc, T., Lévesque, M., & Julien, D. (2008). Tensile and fatigue tests on plymetal assemblies. (Rapport technique). Non disponible
Komgom, N. C., & Lakis, A. A. (2008). Technical requirements for bearing tests at Pratt & Whitney. (Rapport technique). Non disponible
Komgom, N. C., Lakis, A. A., & Mureithi, N. W. (2008). Spécifications techniques du Laboratoire pour le projet CRIAQ 1.18. (Rapport technique). Non disponible
Maillot, A., Vu Viet, H., Lakis, A. A., & Marcouiller, L. (2008). Analyse modale d'une aube dans l'eau. (Rapport technique). Non disponible
Sghir, K. A., Thomas, M., Lakis, A. A., & Mureithi, N. W. (2008). Signaux d'une fraiseuse haute vitesse. (Rapport technique). Non disponible
Abbasi, S., Derdouri, A., & Carreau, P. (juin 2008). Morphological electrical and mechanical properties of PC/MWCNT composites in different microinjection molding conditions [Communication écrite]. 24th Annual Meeting of the Polymer Processing society, Salerno, Italy. Non disponible
Abbasi, S., Derdouri, A., & Carreau, P. (août 2008). Rheology, morphology and temperature dependency of nanotube networks in polycarbonate/multiwalled carbon nanotube composites [Communication écrite]. 15th International Congress on Rheology, Monterey, CA. Lien externe
Abbasi, S., Leelapornpisit, W., Derdouri, A., & Carreau, P. (mai 2008). Morphology and properties of microinjected polycarbonate/MWCNT nanocomposites [Communication écrite]. 66th Annual Technical Conference of the Society of Plastics Engineers, Plastics Encounter at ANTEC 2008. Non disponible
Achiche, S., Wozniak, A., Fan, Z., Balazinski, M., Baron, L., & Sørensen, T. (mai 2008). 3D CMM strain-gauge triggering probe error characteristics modeling using fuzzy logic [Communication écrite]. Annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2008), New York City, NY, United states. Lien externe
Achim, V., & Ruiz, E. (juillet 2008). Guiding selection toward cost-effective composite manufacturing [Communication écrite]. 9th International Conference on Flow Processes in Composite Materials, Montréal, Québec. Lien externe
Aïssa, B., Laberge Lebel, L., Therriault, D., & El Khakani, M. A. (mai 2008). Synthèse contrôlée des nanotubes de carbone monoparois par l'approche plasma/laser pour l'élaboration de nanocomposites NTC-Polymère [Communication écrite]. 76e Congrès de l'ACFAS, Québec, QC, Canada. Non disponible
Aliyu, M. D. S., & Boukas, E.-K. (juin 2008). Discrete-time mixed H₂/H [infinity symbol] nonlinear filtering [Communication écrite]. 2008 American Control Conference (ACC '08), Seattle, WA, United states. Lien externe
Arjmand, N., Shirazi-Adl, A., & Parnianpour, M. (juin 2008). Applications of the kinematics-driven approach in spine biomechanics [Communication écrite]. Canadian Society of Mechanical Engineers Forum (CSME), Ottawa. Non disponible
Arsenault, B., Le Tellier, R., & Hébert, A. (septembre 2023). Efficiency of the delta-tracking technique for Monte Carlo calculations applied to neutron-transport simulations of the advanced CANDU reactor design [Communication écrite]. International Conference on the Physics of Reactors, Interlaken, Switzerland. Non disponible
Aubin, C.-É., Labelle, H., Lenke, L. G., Jackson, R. P., Newton, P. O., & Stokes, I. A. (septembre 2008). Proposal for a reference axis as a basis of 3D classification of idiopathic scoliosis [Communication écrite]. 43rd Annual Meeting Scoliosis Research Society, Salt Lake City, Utah. Lien externe
Balazinski, M., Kavoliunas, M., & Klim, H. Z. (juin 2008). Risk ranking tool based on the fuzzy methodology [Communication écrite]. COMADEM 2008, Prague. Non disponible
Bazrgari, B., & Shirazi-Adl, A. (juin 2008). Biodynamics of human trunk in seated whole-body vibration [Communication écrite]. 2nd American Conference on Human Vibration, Chicago. Non disponible
Bazrgari, B., & Shirazi-Adl, A. (mars 2008). Effect of velocity on trunk biodynamics in free flexion-extension movements [Communication écrite]. Transactions of the 54th Orthopedic Research Society, San Francisco, California. Non disponible
Bazrgari, B., & Shirazi-Adl, A. (juin 2008). Spinal loads, muscle forces and stability under axial shocks [Communication écrite]. 2nd American Conference on Human Vibration, Chicago. Non disponible
Bazrgari, B., & Shirazi-Adl, A. (juin 2008). Spine biodynamics in movements: effect of inertia [Communication écrite]. Canadian Society of Mechanical Engineers Forum (CSME), Ottawa. Non disponible
Béguin, C., Ross, A., Pettigrew, M. J., & Langre, E. (juin 2008). Effect of fluid density on two-phase damping for piping subjected to internal bubbly flow [Communication écrite]. 9th International Conference on Flow-Induced Vibration (FIV 2008), Prague, Czech Republic. Lien externe
Béguin, C., Ross, A., Pettigrew, M. J., & Mureithi, N. W. (juin 2008). Relationship between vibration behaviour and two-phase flow regime transitions for piping with internal flow [Communication écrite]. 9th International Conference on Flow-Induced Vibration (FIV 2008), Prague, Czech Republic. Lien externe
Brochu, M., Verreman, Y., Ajersch, F., & Bucher, L. (septembre 2008). Fatigue behavior of semi-solid cast aluminum: A critical review [Communication écrite]. 10th International Conference on Semi-Solid Processing of Alloys and Composites (S2P 2008), Aachen, Germany. Publié dans Solid State Phenomena, 141-143. Lien externe
Brochu, M., Verreman, Y., Ajersch, F., & Bucher, L. Fatigue des pièces d'aluminium fabriquées par voie semi-solide [Communication écrite]. Journée du REGAL 2007. Non disponible
Brown, W., Marchand, L., Évrard, A., & Reeves, D. (juillet 2007). The effect of bolt size on the assembly nut factor [Communication écrite]. 2007 ASME Pressure Vessels and Piping Conference, PVP 2007, San Antonio, TX, United states. Lien externe
Bureau, M., Moreno, M., & Ajji, A. (mai 2008). Endothelial/Smooth muscle cells growth into nonwoven fiber vascular grafts [Communication écrite]. International Congress on Biomaterials, Amsterdam, Netherlands. Non disponible
Bureau, M., Moreno, M., & Ajji, A. (octobre 2008). Endothelial/Smooth muscle cells growth into nonwoven fiber vascular grafts [Communication écrite]. Fiber Society 2008 Fall Meeting and Technical Conference, Boucherville, Québec, Canada. Non disponible
Camarero, R., Courchesne, O., & Guibault, F. (juin 2008). Hybrid mesh validation and visualization [Communication écrite]. International conference on Numerical geometry, grid generation and scientific computing, Moscow. Lien externe
Causse, P., Ruiz, E., & Trochu, F. (juillet 2008). Consolidation of curved composite parts manufactured by flexible injection [Communication écrite]. 9th International Conference on Flow Processes in Composite Materials, Montréal, Québec. Lien externe
Chapuis, S., & Bernier, M. Étude préliminaire sur le stockage solaire saisonnier par puits géothermique [Communication écrite]. 3rd Canadian Solar Buildings Conference, Frédéricton, Nouveau-Brunswick. Non disponible
Charlot, L., Étienne, S., & Pelletier, D. (juin 2008). Lagrangian sensitivity equation method for shape parameters [Communication écrite]. 16th Annual Conference of the Computational Fluid Dynamics Society of Canada, Saskatoon, SK, Canada. Non disponible
Chatel, S., Ruiz, E., Trochu, F., & Bréard, J. (juillet 2008). A permeability measurement method dedicated to a composite process family [Communication écrite]. 9th International Conference on Flow Processes in Composite Materials, Montréal, Québec. Lien externe
Chayer, B., De Guise, J. A., & Cloutier, G. (mai 2008). Effect of depth of correlation on cross-correlation blood flow measurements in glass microchannels [Communication écrite]. 5th IEEE International Symposium on Biomedical Imaging: From Nano to Macro, Paris, France (4 pages). Lien externe
Cloutier, F., & Trochu, F. (juillet 2008). Analysis of multiple zone heating in resin transfer molding [Communication écrite]. 9th International Conference on Flow Processes in Composite Materials, Montréal, Québec. Lien externe
Cote, M., Boulay, J.-A., Ozell, B., Labelle, H., & Aubin, C.-É. (octobre 2008). Virtual reality simulator for scoliosis surgery training: transatlantic collaborative tests [Communication écrite]. IEEE International Workshop on Haptic Audio visual Environments and Games (HAVE 2008), Ottawa, ON, Canada. Lien externe
Dammark, M., Kharrat, M., Shirazi-Adl, A., & Trabelsi, M. (mai 2008). Finite element analysis of a steel post inserted in polymer cylinder under pull-out and torque loadings [Communication écrite]. 13th International Conference on Applied Mechanics and Mechanical Engineering, Cairo, Egypt. Lien externe
Daqoune, T., Ruiz, E., & Trochu, F. (juillet 2008). Study of the shape of the compaction chamber in flexible injection [Communication écrite]. 9th International Conference on Flow Processes in Composite Materials, Montréal, Québec. Lien externe
Demaria, C., Ruiz, E., & Trochu, F. (juillet 2008). In-plane anisotropic permeability characterization of deformed woven fabrics by unidirectional injection [Communication écrite]. 9th International Conference on Flow Processes in Composite Materials, Montréal, Québec. Lien externe
Divialle, A., Vadean, A., Vaclav, K., & Yahia, L. (juin 2008). Thermodynamic model of bone remodeling : numerical implementation [Communication écrite]. 31st Annual Conference Canadian Medical and Biological Engineering Society (CMBEC 2008), Montréal, Québec. Lien externe
Doria, M., & Birglen, L. (octobre 2008). Design of an underactuated compliant gripper for surgery using Nitinol [Communication écrite]. CEIMEXCAN 2008, Montréal, Québec. Non disponible
Driscoll, C., Aubin, C.-É., Labelle, H., & Dansereau, J. (juillet 2008). The Relationship Between Hip Flexion/Extension and the Sagittal Curves of the Spine [Communication écrite]. 7th Biennial Meeting of the International Research Society of Spinal Deformities (IRSSD 2008), Liverpool, UK. Lien externe
Étienne, S. (juillet 2008). Vortex induced vibrations and galloping of two cylinders placed in tandem arrangement [Communication écrite]. 18th International Offshore and Polar Engineering Conference, ISOPE 2008. Non disponible
Étienne, S., Garon, A., & Pelletier, D. (janvier 2008). Geometric conservation law and finite element methods for ALE simulations of incompressible flows [Communication écrite]. 46th AIAA Aerospace Sciences Meeting, Reno. Lien externe
Gemme, F., Verreman, Y., Jahazi, M., & Dubourg, L. (janvier 2008). Friction stri welding of 7075 aluminium alloy : finite element modelling of the dwell phase [Communication écrite]. International Symposium on Aerospace Materials and Manufacturing. Non disponible
Gendron, D., Goussard, Y., Beaudoin, G., Soulez, G., & Cloutier, G. (août 2008). Reconstruction of real tomographic data using algebraic methods [Communication écrite]. 30th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS 2008, Vancouver, BC, Canada. Lien externe
Gendron, R., Ajji, A., Dufour, J., Dimitrievska, S., & Bureau, M. (août 2008). Cell attachment on new fibrous pet structures for vascular grafts under controlled shear stress: experimental set-up and methodology [Communication écrite]. 15th International Congress on Rheology, Monterey, CA. Lien externe
Giguère, J.-S., Ilinca, F., Étienne, S., & Pelletier, D. (juin 2008). Numerical simulation and sensitivity analysis of thermally induced flow instabilities [Communication écrite]. 8th World Congress on Computational Mechanics (WCCM) and 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS), Venice, Italy. Non disponible
Gordon, S., & Boukhili, R. (juillet 2008). Low velocity impact characterization of a foam core composite sandwich with an E_Glass fabric/vinyl ester laminates skins [Communication écrite]. 7th Canada Japan Workshop on Composites, Shonan university in Fujisawa. Lien externe
Haidar, A., & Boukas, E.-K. (décembre 2008). Robust stability criteria for Markovian jump singular systems with time-varying delays [Communication écrite]. 47th IEEE Conference on Decision and Control. Lien externe
Hajj-Hassan, M., Gonzalez, T., Djeghelian, H., Ghafar-Zadeh, E., Therriault, D., Chodavarapu, V., & Andrews, M. (janvier 2008). Direct-write patterning of nanostructured sensory waveguides for integrated optical bioimaging applications [Communication écrite]. Nanoscale Imaging, Sensing, and Actuation for Biomedical Applications V, San Jose, CA, United states. Lien externe
Hamelin, B., Goussard, Y., Gendron, D., Dussault, J.-P., Cloutier, G., Beaudoin, G., & Soulez, G. (mai 2008). Iterative CT reconstruction of real data with metal artifact reduction [Communication écrite]. IEEE International Symposium on Biomedical Imaging: From Macro to Nano (ISBI '08), Paris, France. Lien externe
Harismendy, I., Del Rio, M., Ruiz, E., & Garcia, J. A. (juillet 2008). Modelling VARTM of wind turbine blades under non-isothermal boundary conditions [Communication écrite]. 9th International Conference on Flow Processes in Composite Materials, Montréal, Québec. Lien externe
Haroutunian, A., Guibault, F., Vu, T. C., & Trépanier, J.-Y. (octobre 2008). Draft tube pier leading edge shape optimization [Communication écrite]. 24th IAHR Symposium on Hydraulic Machinery and Systems, Foz do Iguacu, Brazil. Non disponible
Hay, A., & Pelletier, D. (octobre 2008). Third Workshop on CFD Uncertainty Analysis : Results from the CADYF Finite Element Flow Solver [Communication écrite]. 3rd Workshop on CFD Uncertainty Analysis, Lisbon, Portugal. Non disponible
Hébert, A., & Santamarina, A. (septembre 2023). Refinement of the Santamarina - Hfaiedh energy mesh between 22.5 eV and 11.4 keV [Communication écrite]. International Conference on the Physics of Reactors, Interlaken, Switzerland. Non disponible
Huet, G., Sanschagrin, B., Gagnon, M., Spooner, D., Vadean, A., & Camarero, R. (juin 2008). The assessment of student teamwork to promote CDIO learning objectives [Communication écrite]. 4th International CDIO Conference, Ghent, Belgium. Lien externe
Huet, G., Spooner, D., Vadean, A., Leblanc, T., Camarero, R., & Fortin, C. (septembre 2008). Development of collaborative and social skills through multidisciplinary design projects [Communication écrite]. International Conference on Engineering and Product Design Education, Barcelona, Spain. Lien externe
Ilinca, F., Pelletier, D., & Hay, A. (mars 2007). First- and Second-Order Sensitivity Equation Methods for Value and Shape Parameters [Communication écrite]. 14th International Conference on Finite Elements in Flow Problems, Santa Fe, New Mexico. Publié dans International Journal for Numerical Methods in Fluids, 57(9). Lien externe
Kang, H. S., Mureithi, N. W., & Pettigrew, M. J. (juin 2008). An investigation on the diffuser-induced vibration instability of a rod in axial annular flow [Communication écrite]. 9th International Conference on Flow-Induced Vibration (FIV 2008), Prague, Czech Republic. Lien externe
Khalvatti, A., Mureithi, N. W., & Pettigrew, M. J. (juillet 2007). Effect of angle of attack on fluidelastic instability of a rotated triangular tube bundle [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2007), San Antonio, TX, United states. Lien externe
Komgom, N. C., Mureithi, N. W., & Lakis, A. A. (juillet 2008). Application of time synchronous averaging, spectral kurtosis and support vector machines for bearing fault identification [Communication écrite]. ASME Pressure Vessels & Piping Conference (PVP 2008), Chicago, IL. Lien externe
Laberge-Label, L., Aissa, B., El Khnakani, M. A., & Therriault, D. (juillet 2008). Single-walled carbon nanotubes/polymer nanocomposites microbeams by Means of ultraviolet-assisted direct-write assembly [Communication écrite]. 7th Joint Canada-Japan Workshop on Composites, Kanagawa, Japan. Non disponible
Lalonde, N. M., Aubin, C.-É., Pannetier, R., & Villemure, I. (juillet 2008). Finite element modeling of vertebral body stapling applied for the correction of idiopathic scoliosis: preliminary results [Communication écrite]. 7th Biennial Meeting of the International Research Society of Spinal Deformities (IRSSD 2008), Liverpool, UK. Lien externe
Le Tellier, R., Marleau, G., & Hébert, A. (septembre 2023). Burn-up dependence of coolant void reactivity for ACR-1000 cell [Communication écrite]. International Conference on the Physics of Reactors, Interlaken, Switzerland. Non disponible
Lebel, F., Trochu, F., & Ruiz, E. (juillet 2008). Thermosetting matrix composite characterization and cure control via a scale model mould [Communication écrite]. 9th International Conference on Flow Processes in Composite Materials, Montréal, Québec. Lien externe
Lévesque, M., & Barello, R. B. (octobre 2008). On the homogenization of nonlinearly viscoelastic composite materials [Communication écrite]. ASME International Mechanical Engineering Congress and Exposition (IMECE 2008), Boston, MA, United states. Lien externe
Lévesque, M., Derrien, K., Baptiste, D., & Gilchrist, M. (mars 2008). On the development and parameter identification of Schapery-type constitutive theories [Communication écrite]. Mechanics of Time-Dependent Materials Conference (MTDM 2008), Monterey, California. Non disponible
Ma, S., & Boukas, E.-K. (décembre 2008). Stability and robust stabilization for uncertain discrete stochastic hybrid singular systems with time-delay [Communication écrite]. 47th IEEE Conference on Decision and Control. Lien externe
Mach, Q. T., Nguyen, T. H., & LePalec, G. (mai 2008). Convection and pattern formation of micro-organisms in a stratified fluid [Communication écrite]. ICHMT International Symposium on Advances in Computational Heat Transfer (CHT 2008), Marrakesh, Morocco (9 pages). Lien externe
Majdouline, Y., Aubin, C.-É., & Labelle, H. (juillet 2008). Influence of correction objectives on the optimal scoliosis instrumentation strategy: A preliminary study [Communication écrite]. 7th Biennial Meeting of the International Research Society of Spinal Deformities (IRSSD 2008), Liverpool, UK. Lien externe
Martin, N., & Hébert, A. (septembre 2023). Application of high-order diamond differencing schemes to 3D Cartesian geometries [Communication écrite]. International Conference on the Physics of Reactors, Interlaken, Switzerland. Non disponible
Martin, N., Marleau, G., & Hébert, A. (novembre 2023). A preliminary study of the OECD/NEA 3D transport problem using the lattice code DRAGON [Communication écrite]. Symposium on Simulation Methods in Nuclear Engineering, Ottawa, Canada. Non disponible
Mascle, C., & Xing, K. (octobre 2008). A liaison model for disassembly-reassembly product ECO-Design [Communication écrite]. 7th International Conference on Integrated, Virtual and Interactive Engineering for Fostering Industrial Innovation (IDMME Virtual Concept 2008), Beijing, China. Non disponible
Mascle, C., Lu, H., & Maranzana, R. (juillet 2008). Génération de gammes d'usinage en aéronautique par la décomposition de volume [Communication écrite]. 1er Colloque Aquitaine-Québec : Mécanique des matériaux et des structures pour l'aéronautique, Pessac, France. Non disponible
Miao, H. Y., Perron, C., & Lévesque, M. (septembre 2008). Finite element simulation of shot peening and stress peen forming [Communication écrite]. 10th International Conference on Shot Peening, Tokyo, Japan. Lien externe
Mureithi, N. W. (juillet 2007). Symposium on Flow Induced Vibration [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2008), San Antonio, TX, United states. Non disponible
Mureithi, N. W., Shahriary, S., & Pettigrew, M. J. (mai 2008). Flow-induced vibration model for steam generator in two-phase flow [Communication écrite]. 14th International Conference on Nuclear Engineering, Orlando, Florida. Lien externe
Navah, F., Étienne, S., & Pelletier, D. (juin 2008). Coupled and semi-coupled finite element methods for the K-[epsilon] model [Communication écrite]. 16th Annual Conference of the Computational Fluid Dynamics Society of Canada, Saskatoon, SK, Canada. Non disponible
Nowlan, I., Ross, A., & Pettigrew, M. J. (juin 2008). Dynamics of a steam generator tube supported by an anti-vibration bar [Communication écrite]. 9th International Conference on Flow-Induced Vibration (FIV 2008), Prague, Czech Republic. Lien externe
Octeau, M.-A., Cloutier, F., Feuvrier, J., Soukane, S., & Trochu, F. (juillet 2008). Numerical simulation of mould filling and thermal behavior in the manufacturing of an aeronautical composite part [Communication écrite]. 9th International Conference on Flow Processes in Composite Materials, Montréal, Québec. Lien externe
Ortega, I., & Ruiz, E. (juillet 2008). Dispersion and dielectric characterization of an epoxy resin reinforced with carbon nanofibers [Communication écrite]. 9th International Conference on Flow Processes in Composite Materials, Montréal, Québec. Lien externe
Païdoussis, M. P., Lakis, A. A., & Karagiozis, K. N. (juin 2008). Nonlinear vibrations on empty and fluid clamped shells of different materials [Communication écrite]. 9th International Conference on Flow-Induced Vibrations (FIV 2008), Prague, Czech Republic. Non disponible
Pelletier, D. (octobre 2008). Accuracy, sensitivity and uncertainty in computational fluid dynamics simulations [Communication écrite]. International Symposium on uncertainty in hydrology, Montréal, Québec. Non disponible
Pelletier, D. (août 2008). DPW: Reflections from an outsider. or The RANS' elusive asymptotic range! [Communication écrite]. 26th AIAA Applied Aerodynamics Conference, Honolulu, HI, United states. Lien externe
Pelletier, D. (juin 2008). On the Use of Sensitivity Analysis to Improve Reduced-Order Models [Communication écrite]. 4th AIAA Flow Control Conference, Seattle, WA. Lien externe
Pelletier, D., Étienne, S., & Hay, A. (juin 2008). Adaptivity, sensitivities and uncertainties in computational fluid dynamics [Communication écrite]. 8th World Congress on Computational Mechanics (WCCM) and 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS), Venice, Italy. Non disponible
Picard, D., & Bernier, M. (mai 2008). Influence d'un récupérateur de chaleur des eaux grises sur le volume de stockage requis pour l'eau chaude domestique [Communication écrite]. eSim 2008, Ville de Québec, Canada. Lien externe
Polizu, S., Savadogo, O., Maugey, M., Rouabhia, M., Poulin, P., & Yahia, L. (juin 2008). Electrochemical behaviour and nanoscale characteristics of CNT-based fibers as new substrate for cell growth [Communication écrite]. 7th International Symposium on New Materials for Electrochemical Systems, Montréal, Québec. Non disponible
Popov, A. V., Chambon, R. P., Le Tellier, R., Marleau, G., & Hébert, A. (septembre 2023). Models for coolant void reactivity evaluation in CANDU Generation II and III+ [Communication écrite]. International Conference on the Physics of Reactors, Interlaken, Switzerland. Non disponible
Pouponneau, P., Savadogo, O., Napporn, T., Yahia, L., & Martel, S. (juin 2008). Potentiodynamic polarization assays on magnetic materials for new medical micros-devices [Communication écrite]. 7th International Symposium on New Materials for Electrochemical Systems, Montréal, Québec. Non disponible
Qin, Z., Ren, Q., Baron, L., Balazinski, M., & Birglen, L. (mai 2008). Joint friction identification for robots using TSK fuzzy system based on subtractive clustering [Communication écrite]. Annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2008), New York City, NY, United States. Lien externe
Raison, M., Aubin, C.-É., Detrembleur, C., Fisette, P., & Samin, J.-C. (juillet 2008). Quantification of intervertebral efforts during walking: comparison between a healthy and a scoliotic subject [Communication écrite]. 7th Biennial Meeting of the International Research Society of Spinal Deformities (IRSSD 2008), Liverpool, UK. Lien externe
Ren, Q., Balazinski, M., Baron, L., & Jemielniak, K. (juin 2008). Tool condition monitoring using the TSK fuzzy approach based on subtractive clustering method [Communication écrite]. 21st International Conference on Industrial, Engineering and Other Applications of Applied Intelligent Systems, (IEA/AIE 2008), Wroclaw, Poland. Lien externe
Ren, Q., Baron, L., & Balazinski, M. (mai 2008). High order type-2 TSK fuzzy logic system [Communication écrite]. Annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2008), New York City, NY, United States. Lien externe
Rigaud, M. (septembre 2008). L'éducation et la recherche en réfractaires : la raison d'être de la FIRE [Communication écrite]. Journées spécialisées réfractaires du Groupe français de la céramique. Non disponible
Rigaud, M. (février 2008). New horizons in refractories development and applications [Communication écrite]. 7th India International Refractories Congress (IREFCON08), Kolkata, India. Non disponible
Ruiz, E., Briones, L., Allard, E., & Trochu, F. (juillet 2008). Flexible injection : a novel LCM technology for low cost manufacturing of high performance composites. Part I : Experimental investigation [Communication écrite]. 9th International Conference on Flow Processes in Composite Materials, Montréal, Québec. Lien externe
Sabri, F., & Lakis, A. A. (décembre 2008). Supersonic flutter of partially liquid-filled circular cylindrical shells subjected to internal pressure and axial compression [Communication écrite]. 4th WSEAS International Conference on Applied and Theoretical Mechanics (MECHANICS 2008), Cairo, Egypt. Lien externe
Saeed, F., Paraschivoiu, I., Trifu, O., Hess, M., & Gabrys, C. (juin 2008). Inverse airfoil design method for low-speed straight-bladed Darrieus-type VAWT applications [Communication écrite]. 7th World Wind Energy Conference, Kingston, Ont.. Non disponible
Safizadeh, M. S., Lakis, A. A., & Oulmane, A. (juin 2008). Application of time-frequency analysis to signals from high speed bearing [Communication écrite]. 21st International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2008), Prague, Czech Republic. Non disponible
Safizadeh, M. S., Lakis, A. A., & Toorani, M. H. (juillet 2008). Detection and classification of hidden corrosion using intelligent pulsed eddy current technique [Communication écrite]. 1er Colloque Québec-Aquitaine, Bordeaux, France. Non disponible
Sangole, A. P., & Knopf, G. K. (novembre 2008). Shape metamorphosis using deformable spherical maps [Communication écrite]. Optomechatronic Technologies 2008. Lien externe
Sassi, S., Badri, B., Thomas, M., & Lakis, A. A. (juin 2008). Tracking surface degradation of ball bearing by means of new time domain scalar indicators [Communication écrite]. 21st International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2008), Prague, Czech Republic (12 pages). Non disponible
Schmitt, C., Henni, A. H., & Cloutier, G. (novembre 2008). Dynamic micro-elastography applied to the viscoelastic characterization of a mimicking artery and a porcine aorta [Communication écrite]. IEEE Ultrasonics Symposium, Beijing, China (4 pages). Lien externe
Sha, G., Lee, K. E., Charbonneau, C., Demopoulos, G. P., Gauvin, R., & Savadogo, O. (juin 2008). Low-temperature fabrication of TiO₂ nanocrystalline film electrodes for dye-sensitized solar cells [Communication écrite]. 7th International Symposium on New Materials for Electrochemical Systems, Montréal, Québec. Non disponible
Sheriff, F., & Bernier, M. (mai 2008). Simulations de champs de puits géothermiques verticaux de charges thermiques différentes [Communication écrite]. eSim 2008, Ville de Québec, Canada. Lien externe
Spooner, D., Sanschagrin, B., Gagnon, M., Vadean, A., Camarero, R., Leblanc, T., & Poirier, D. (juin 2008). Fostering team dynamics across and engineering curriculum [Communication écrite]. 4th International CDIO Conference, Ghent, Belgium. Lien externe
Thomassin, J., Vo, H. D., & Mureithi, N. W. (juin 2009). Experimental Demonstration of the Tip Clearance Flow Resonance Behind Compressor Non-Synchronous Vibration [Communication écrite]. ASME Turbo Expo: Power for Land, Sea and Air (GT 2008), Berlin, Germany. Lien externe
Tribes, C., Guibault, F., Farinas, M.-I., Dubé, J.-F., Murry, N., Vu, T. C., & Demers, É. (octobre 2008). Combining optimization techniques and conventional engineering practices to design francis runners [Communication écrite]. 24th IAHR Symposium on Hydraulic Machinery and Systems, Foz do Iguacu, Brazil. Non disponible
Trochu, F., Soukane, S., & Touraine, B. (juillet 2008). Flexible injection : a novel LCM technology for low cost manufacturing of high performance composites. Part II : Numerical model [Communication écrite]. 9th International Conference on Flow Processes in Composite Materials, Montréal, Québec. Lien externe
Vasilevskiy, D., Turenne, S., & Masut, R. A. (juillet 2008). Thermoelectric extruded alloys for module manufacturing : 10 years of development at École Polytechnique de Montréal [Communication écrite]. 5th European Conference on Thermoelectrics, Paris, France. Lien externe
Verreman, Y. (octobre 2008). Durabilité en fatigue des joints soudés par frottement-malaxage [Communication écrite]. Séminaire industriel du REGAL, Laval, Québec. Non disponible
Vidal, D., Ridgway, C., Pianet, G., Schoelkopf, J., Roy, R., & Bertrand, F. (juin 2008). Effect of particle size distribution and packing compression on fluid permeability: A comparison of experiments and monte-carlo/lattice-Boltzmann simulations [Communication écrite]. TAPPI Advanced Coating Fundamentals Symposium, Montréal, Québec. Non disponible
Vo, H. D., Cameron, J. D., & Morris, S. C. (juin 2008). Control of Short Length-Scale Rotating Stall Inception on a High-Speed Axial Compressor With Plasma Actuation [Communication écrite]. ASME Turbo Expo: Power for Land, Sea and Air (GT 2008), Berlin, Germany. Lien externe
Wang, X., Aubin, C.-É., Labelle, H., & Crandall, D. (juillet 2008). Biomechanical modelling of a direct vertebral translation instrumentation system: Preliminary results [Communication écrite]. 7th International Research Society of Spinal Deformities Meeting (IRSSD 2008), Liverpool, England. Lien externe
Wang, X., Aubin, C.-É., Labelle, H., & Crandall, D. (janvier 2008). Modélisation biomécanique du système d'instrumentation rachidienne TSRH-3D [Communication écrite]. 23e Congrès annuel de la recherche des étudiants gradués et post-gradués, Montréal, Québec. Non disponible
Wang, X., Aubin, C.-É., Labelle, H., & Crandall, D. (novembre 2008). Modélisation et analyse biomécanique de deux systèmes d'instrumentation rachidienne [Communication écrite]. 38e Réunion annuelle de la Société de scoliose du Québec, Québec, QC. Non disponible
Watteaux, R., Étienne, S., Pelletier, D., & Mureithi, N. W. (juin 2008). Determination of a fluid-elastic instability domain using the shape sensitivity equation method [Communication écrite]. 9th International Conference on Flow-Induced Vibration (FIV 2008), Prague, Czech Republic. Non disponible
Watteaux, R., Mureithi, N. W., & Pelletier, D. (juillet 2007). Determination of coupling force derivatives in tube bundles using the shape sensitivity equation method [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2007), San Antonio, TX, United states. Lien externe
Watteaux, R., Pelletier, D., Étienne, S., & Mureithi, N. W. (janvier 2008). Determination of a fluid-elastic instability domain using the shape sensitivity equation method [Communication écrite]. 46th AIAA Aerospace Sciences Meeting, Reno. Lien externe
Yang, J., Chen, Z. C., & Vadean, A. (juin 2008). Application of an analytical-and-FEA coupled optimization approach to gear train design [Communication écrite]. CSME Forum, Ottawa. Non disponible
Zargarbashi, S. H. H., & Mayer, J. R. R. (mai 2008). Simulation of XYC trajectory in five-axis machine tool and the Jacobian-based error estimation [Communication écrite]. 19th IASTED International Conference on Modelling and Simulation, Québec, QC, Canada. Lien externe
Zhang, C., Pettigrew, M. J., & Mureithi, N. W. (juin 2008). Further study of quasi-periodic vibration excitation forces in rotated triangular tube bundles subjected to two-phase cross flow [Communication écrite]. 9th International Conference on Flow-Induced Vibration (FIV 2008), Prague, Czech Republic. Lien externe
Zhang, L., & Boukas, E.-K. (juin 2008). Discrete-time Markovian jump linear systems with partly unknown transition probabilities: H infinity filtering problem [Communication écrite]. American Control Conference (ACC 2008), Seattle, WA, United states. Lien externe
Zhang, L., Boukas, E.-K., & Baron, L. (décembre 2008). Fault detection for discrete-time Markov jump linear systems with partially known transition probabilities [Communication écrite]. 47th IEEE Conference on Decision and Control (CDC 2008). Lien externe
Zhang, L., Boukas, E.-K., & Haidar, A. (décembre 2008). New results on control synthesis for time-varying delay systems with actuator saturation [Communication écrite]. 47th IEEE Conference on Decision and Control. Lien externe
Zhang, L., Shi, P., & Basin, M. (juin 2008). Model reduction for switched linear parameter varying systems with average dwell time [Communication écrite]. American Control Conference 2008, Seattle, Wash.. Lien externe
Zhang, L., Shi, P., & Basin, M. (décembre 2008). Robust stabilization for arbitrarily switched linear systems with time-varying delays and uncertainties [Communication écrite]. 47th IEEE Conference on Decision and Control. Lien externe
Clin, J., Aubin, C.-É., Parent, S., & Labelle, H. (juillet 2008). Importance of the immediate correction for the effectiveness of brace treatment in AIS [Résumé]. 7th Biennial Meeting of the International Research Society of Spinal Deformities (IRSSD 2008), Liverpool, UK. Lien externe
Driscoll, M., Aubin, C.-É., Parent, S., & Moreau, A. (juillet 2008). Stress shielding within the scoliotic spine: a progressive risk factor? [Résumé]. 7th Biennial Meeting of the International Research Society of Spinal Deformities (IRSSD 2008), Liverpool, UK. Lien externe
Lamarre, M.-E., Parent, S., Labelle, H., Aubin, C.-É., Joncas, J., & Petit, Y. (juillet 2008). Suspension is better than side-bending to assess spinal flexibility in Adolescent Idiopathic Scoliosis [Résumé]. 7th Biennial Meeting of the International Research Society of Spinal Deformities (IRSSD 2008), Liverpool, UK. Lien externe
Lin, H., Aubin, C.-É., Villemure, I., & Parent, S. (juillet 2008). An energy-based mechanobiological growth model for simulating vertebral progressive deformities under multi-direction loads [Résumé]. 7th Biennial Meeting of the International Research Society of Spinal Deformities (IRSSD 2008), Liverpool, England. Lien externe
Meunier, J. E., Aubin, C.-É., Labelle, H., Sangole, A., Jackson, R., Lenke, L., & Newton, P. (juillet 2008). A significant number of patients with AIS exhibit transverse plane pelvis deformation [Résumé]. 7th Biennial Meeting of the International Research Society of Spinal Deformities (IRSSD 2008), Liverpool, UK. Lien externe
Sangole, A. P., Aubin, C.-É., Stokes, I. A. S., & Labelle, H. (juillet 2008). Are there sub-types in Lenke-1 curves? [Résumé]. 7th Biennial Meeting of the International Research Society of Spinal Deformities (IRSSD 2008), Liverpool, UK. Lien externe
Stokes, I. A. F., Sangole, A. P., & Aubin, C.-É. (juillet 2008). Classification of scoliosis deformity 3-D spinal shape by cluster analysis [Résumé]. 7th Biennial Meeting of the International Research Society of Spinal Deformities (IRSSD 2008), Liverpool, UK. Lien externe
Abdellaoui, C. (2008). Étude expérimentale du contrôle en pression et en température de la fabrication de composites par injection flexible [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Barello, R. B. (2008). Modélisation de la décohésion de l'interface renfort-matrice dans un matériau composite par la méthode des éléments finis [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Blais, J.-F. (2008). Application de l'holographie acoustique en champ proche à l'étude du rayonnement transitoire de plaques soumises à des impacts [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Brès, A. (2008). Modélisation et simulation du soudage par friction malaxage utilisant des robots industriels [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Canet, F. (2008). Conception et évaluation d'un système de positionnement dynamique pour les chirurgies du rachis [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Charlot, L. (2008). Une méthode de l'équation des sensibilités lagrangiennes pour les écoulements [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Clin, T. É. (2008). Simulations numériques du comportement thermomécanique de modules thermoélectriques [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Divialle, A. (2008). Développement d'un algorithme avec prise en compte du remodelage osseux et de l'ostéo-intégration appliqué à une prothèse orthopédique [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Doria Di Costanzo, M. A. (2008). Design of an underactuated compliant gripper for surgery using nitinol [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Fekri, M. (2008). Convection naturelle dans une couche horizontale d'un fluide binaire confinée par des parois poreuses minces [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Giguère, J.-S. (2008). Analyse de sensibilité dans les écoulements instables complexes [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Haidar, A. (2008). Singular systems with time-varying delays [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Joly, T. (2008). Instabilité fluide-élastique d'un faisceau de tubes entièrement flexible soumis à un écoulement diphasique transverse suivant différents angles d'attaques [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Komgom Nguepjop, C. (2008). Développement d'une procédure intelligente de diagnostic des défauts de roulement et étude de l'impact du chemin de transmission du signal sur sa fiabilité [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Lanoue, F. (2008). Modélisation et simulation des assemblages mécaniques par frettage sollicités en fatique par la méthode des éléments finis [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Le Roy, V. (2008). Étude numérique et semi-empirique de joints hydrauliques d'étanchéité droits et escalier [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Ledoux-Corbeil, A. (2008). Études expérimentale et numérique de la fissuration à chaud lors du moulage en sable de pièces structurales en alliage de magnésium [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Lemire, S. (2008). Amélioration de la performance des compresseurs et des soufflantes par actionnement plasma [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Navah, F. (2008). Une formulation monolithique des modèles de turbulence à deux équations : calcul éléments finis d'écoulements et de sensibilités [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Nowlan, I. (2008). Étude expérimentale du comportement vibratoire d'un tube de générateur de vapeur en interaction avec une barre plate [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Ortega, I. (2008). Fabrication et caractérisation de nanocomposites à matrice époxy [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Rivet, H. (2008). Développement d'une méthodologie d'optimisation des paramètres de grenaillage pour améliorer la vie en fatigue [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Roy, F. (2008). Fabrication et caractérisation des contacts électriques de modules à effet Peltier faits à base de matériaux thermoélectriques (Bi, Sb)₂(Te,Se)₃ [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Turgeon, F. (2008). Nouveau modèle adimensionnel pour l'étude des assemblages boulonnés précontraints soumis à un chargement externe [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Villalpando, F. (2008). Simulation numérique pour la prédiction des coefficients de traînée et de portance d'un profil givré [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Watteaux, R. (2008). Étude des facteurs d'influence d'un faisceau de cylindres dans un écoulement transverse à bas régime [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Boukehili, H. (2008). Étude de l'effet des paramètres de mise en oeuvre et des constituants sur les propriétés mécaniques et tribologiques des garnitures de freins [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Demaria, C. F. (2008). Caractérisation expérimentale et modélisation de la perméabilité de renforts à fibres continues déformés par cisaillement [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Fauteux, C. (2008). Synthèse de nanostructures d'oxyde de zinc par procédé laser [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Gordon, S. (2008). Tolérance aux dommages des matériaux composites aéronautiques [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Hajzargarbashi, S. (2008). Métrologie des machines-outils cinq axes par barre-à-billes et par fermeture de chaîne cinématique [Thèse de doctorat, École Polytechnique de Montréal]. Non disponible
Hassani, S. (2008). Conception de couches minces tribologiques pour augmenter la résistance à l'érosion par impacts de particules [Thèse de doctorat, École Polytechnique de Montréal]. Non disponible
Mokhbi-Soukane, D. (2008). Études numériques de la diffusion couplée d'oxygène, glucose et d'acide lactique dans le disque intervertébral [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Nouanegué, H. F. (2008). Étude du transfert thermique conjugué dans les cavités rectangulaires en convection naturelle [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Shirazi Aghjari, R. (2008). Computational biomechanics of the human knee joint : role of collagen fibrils networks [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Yahiaoui, M. A. (2008). Simulation numérique de la convection naturelle induite par double diffusion et effet soret dans une cavité cylindrique concentrique [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Birglen, L., Laliberté, T., & Gosselin, C. (2008). Underactuated robotic hands. Lien externe
Boukas, E.-K. (2008). Control of singular systems with random abrupt changes. Lien externe
Bailon, J.-P., Masounave, J., & Dickson, J. I. (2008). Les lois de fissuration par fatigue. Dans La fatigue des matériaux et des structures (p. 119-152). Non disponible
Birglen, L., Laliberté, T., & Gosselin, C. (2008). Design and Control of the Laval Underactuated Hands. Dans Underactuated Robotic Hands (Vol. 40, p. 171-207). Lien externe
Birglen, L., Laliberté, T., & Gosselin, C. (2008). Grasp Stability of Underactuated Fingers. Dans Underactuated Robotic Hands (Vol. 40, p. 61-115). Lien externe
Birglen, L., Laliberté, T., & Gosselin, C. (2008). Grasping vs. Manipulating. Dans Underactuated Robotic Hands (Vol. 40, p. 7-31). Lien externe
Birglen, L., Laliberté, T., & Gosselin, C. (2008). Kinetostatic Analysis of Robotic Fingers. Dans Underactuated Robotic Hands (Vol. 40, p. 33-60). Lien externe
Birglen, L., Laliberté, T., & Gosselin, C. (2008). Optimal Design of Underactuated Fingers. Dans Underactuated Robotic Hands (Vol. 40, p. 117-138). Lien externe
Birglen, L., Laliberté, T., & Gosselin, C. (2008). Underactuation between the fingers. Dans Underactuated Robotic Hands (Vol. 40, p. 139-169). Lien externe
Varin, É., Dionne, M.-J., Bernard, M., Lacroix, S., & Riopel, D. (2008). Le génie est une profession pour toutes. Dans Le leadership des femmes en STIM : sciences, technologies, ingénierie et mathématiques (p. 133-146). Lien externe
Verreman, Y. (2008). Propagation des fissures courtes. Dans La fatigue des matériaux et des structures. T. 2, Fissures courtes, mécanismes et approche locale, fatigue-corrosion et effet de l'environnement, chargements d'amplitude variable (p. 17-57). Non disponible
Wang, X., & Baron, L. (2008). Topology and geometry of serial and parallel manipulators. Dans Ryu, J.-H. (édit.), Parallel manipulators, new developments (p. 57-74). Lien externe
