![]() | Up a level |
Abanto, J., & Reggio, M. (2006). Numerical investigation of the flow in a kitchen hood system. Building and Environment, 41(3), 288-296. External link
Abanto, J., Reggio, M., & Painchaud-Ouellet, S. (2006). On the Design of the RTO Unit Using CFD. Applied Thermal Engineering, 26(17-18), 2327-2335. External link
Achiche, S., Baron, L., & Balazinski, M. (2006, June). Predictive fuzzy control of paper quality [Paper]. 2004 annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2006), Montréal, Québec. External link
Achiche, S., Przybylo, A., Balazinski, M., & Baron, L. (2006, June). Predefining numbers of fuzzy sets for genetically generated fuzzy knowledge bases using clustering techniques: Application for tool wear monitoring [Paper]. 2004 annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2006), Montréal, Québec. External link
Achiche, S., Wozniak, A., Balazinski, M., & Baron, L. (2006, June). Fuzzy rule base influence on genetic-fuzzy reconstruction of CMM 3D triggering probe error characteristic [Paper]. 2004 annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2006), Montréal, Québec. External link
Achim, V., Soukane, S., Gauvin, R., & Trochu, F. (2006, August). Optimization of liquid composite molding based on a mold coefficient concept [Paper]. 6th Canada-Japan Workshop on Composites, Toronto, Canada. Unavailable
Allard, E. (2006). Analyse expérimentale et optimisation d'un procédé d'injection flexible pour la fabrication rapide des composites [Master's thesis, École Polytechnique de Montréal]. Available
Alloui, Z. (2006). Analyse et simulation de la bioconvection en milieu fluide [Ph.D. thesis, École Polytechnique de Montréal]. Available
Alloui, Z., Nguyen, T. H., & Bilgen, E. (2006). Stability analysis of thermo-bioconvection in suspensions of gravitactic microorganisms in a fluid layer. International Communications in Heat and Mass Transfer, 33(10), 1198-1206. External link
Anscutter, F., Béguin, C., Ross, A., Pettigrew, M. J., & Mureithi, N. W. (2006, July). Two-phase damping and interface surface area in tubes with internal flow [Paper]. ASME Pressure Vessels and Piping Conference (PVP 2006) and ICPVT-11 Conference, Vancouver, BC, Canada (11 pages). External link
Arjmand, N. (2006). Computational biomechanics of the human spine in static lifting tasks [Ph.D. thesis, École Polytechnique de Montréal]. Available
Arjmand, N., & Shirazi-Adl, A. (2006). Model and in vivo studies on human trunk load partitioning and stability in isometric forward flexions. Journal of Biomechanics, 39(3), 510-521. External link
Arjmand, N., & Shirazi-Adl, A. (2006). Role of Intra-Abdominal Pressure in the Unloading and Stabilization of the Human Spine During Static Lifting Tasks. European Spine Journal, 15(8), 1265-1275. External link
Arjmand, N., & Shirazi-Adl, A. (2006, March). Role of intra-abdominal pressure in unloading and stabilizing the human spine is task dependent [Paper]. Transactions of the 52nd Orthopedic Research Society, Chicago, Illinois. Unavailable
Arjmand, N., & Shirazi-Adl, A. (2006). Sensitivity of Kinematics-Based Model Predictions to Optimization Criteria in Static Lifting Tasks. Medical Engineering & Physics, 28(6), 504-514. External link
Arjmand, N., & Shirazi-Adl, A. (2006, June). Unloading and stabilizing effect of intra-abdominal pressure in lifting is task dependent [Paper]. IEEE International Symposium on Subscriber Loops and Services, Bergen, Norway. Unavailable
Arjmand, N., Shirazi-Adl, A., & Bazrgari, B. (2006, July). Influence of curved lines of action for trunk extensor muscles on load redistribution and stability of the spine during lifting [Abstract]. 5th World Congress of Biomechanics, Munich, Germany. Published in Journal of Biomechanics, 39. External link
Arjmand, N., Shirazi-Adl, A., & Bazrgari, B. (2006). Wrapping of Trunk Thoracic Extensor Muscles Influences Muscle Forces and Spinal Loads in Lifting Tasks. Clinical Biomechanics, 21(7), 668-675. External link
Badri, B., Archambault, R., Thomas, M., Sassi, S., & Lakis, A. A. (2006, October). La transformée de Julien pour différencier les chocs synchrones des chocs asynchrones [The Julien transform to detect synchronous and asynchronous shock data]. [Paper]. 24th Seminar on Machinery Vibration (CMVA 2006), Montréal, Québec. External link
Bahloul, A., Yahiaoui, M. A., Vasseur, P., Bennacer, R., & Beji, H. (2006). Natural convection of a two-component fluid in porous media bounded by tall concentric vertical cylinders. Transactions of the ASME. Journal of Applied Mechanics, 73(1), 26-33. External link
Barello, R. B., & Lévesque, M. (2006, December). Modélisation de la décohésion interface renfort-matrice dans un matériau composite [Poster]. 2e colloque annuel du CREPEC, Montréal, Québec. Unavailable
Bazrgari, B., Shirazi-Adl, A., & Arjmand, N. (2006, June). Biomechanical analysis of squat and stoop lifts using the kinematics-driven finite element model [Paper]. IEEE International Symposium on Subscriber Loops and Services, Bergen, Norway. Unavailable
Bazrgari, B., Shirazi-Adl, A., & Arjmand, N. (2006, July). Load distribution between active-passive systems in squat and stoop dynamic lifts [Abstract]. 5th World Congress of Biomechanics, Munich, Germany. Published in Journal of Biomechanics, 39. External link
Béguin, C., Pettigrew, M. J., & Mureithi, N. W. (2006, November). Flow Pattern Recognition and Dynamic Characteristics of Two-Phase Cross Flow in Steam Generator Tube Bundles [Paper]. 5th CNS International Steam Generator Conference, Toronto, Ontario. Unavailable
Bellavigna, O., & Gou, M. (2006, October). Acceleration performances testing and simulation of various types of commercial vehicles for railway crossing design [Paper]. Commercial Vehicle Engineering Congress and Exhibition, Chicago, IL, United states. External link
Ben Amor, Z. (2006). Méthode prédictive de densités de palpage en métrologie [Master's thesis, École Polytechnique de Montréal]. Available
Ben Mehni, A., Mascle, C., & Balazinski, M. (2006, May). Agility in high speed machining : optimisation between tool and holder [Paper]. 6th International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME 2006), Grenoble. Unavailable
Bernard, C., El Abras, M., Menard, M., Halle, J. P., Yahia, L., & De Crescenzo, G. Characterization of adhesion processes between alginate and PLL for micro encapsulation application [Paper]. 29th Annual Meeting of the Adhesion Society. Unavailable
Bernard, C., Leduc, A., Barbeau, J., Saoudi, B., Yahia, L., & De Crescenzo, G. (2006). Validation of Cold Plasma Treatment for Protein Inactivation: a Surface Plasmon Resonance-Based Biosensor Study. Journal of physics. D, Applied physics, 39(16), 3470-3478. External link
Bernier, M. (2006). Closed-loop ground-coupled heat pump systems. ASHRAE Journal, 48(9), 12-18. Unavailable
Bey-Oueslati, R., Palm, S., Therriault, D., & Martel, S. (2006, December). High-speed direct-write for rapid fabrication of three-dimensional microfluidic devices [Paper]. 3rd Microfluidics French Conference, Toulouse, France. Unavailable
Bey-Oueslati, R., Therriault, D., & Martel, S. (2006, October). Micro heat pipe fabrication : high performance deposition platform for electronic industry [Paper]. 5th International Workshop on Microfactories, Besançon, France. Unavailable
Birglen, L. (2006, September). An introduction to the analysis of linkage-driven compliant underactuated fingers [Paper]. ASME International Design Engineering Technical Conferences and Computers and Information In Engineering Conference (DETC 2006), Philadelphia, PA, United States (9 pages). External link
Birglen, L., & Gosselin, C. M. (2006). Force Analysis of Connected Differential Mechanisms: Application to Grasping. International Journal of Robotics Research, 25(10), 1033-1046. External link
Birglen, L., & Gosselin, C. M. (2006). Geometric Design of Three-Phalanx Underactuated Fingers. Journal of Mechanical Design, 128(2), 356-364. External link
Birglen, L., & Gosselin, C. M. (2006). Grasp-State Plane Analysis of Two-Phalanx Underactuated Fingers. Mechanism and Machine Theory, 41(7), 807-822. External link
Birglen, L., & Gosselin, C. M. (2006, September). Optimally unstable underactuated gripper: Synthesis and applications [Paper]. ASME International Design Engineering Technical Conferences and Computers and Information In Engineering Conference (DETC 2006), Philadelphia, PA, United States. External link
Bolduc, J. E., Lewis, L. J., Aubin, C.-É., & Geitmann, A. (2006). Finite-Element Analysis of Geometrical Factors in Micro-Indentation of Pollen Tubes. Biomechanics and Modeling in Mechanobiology, 5(4), 227-36. External link
Bolduc, J.-F. (2006). Effet de l'écrouissage sur la propagation d'une fissure à partir d'un trou chargé dans des alliages d'aluminium 2024-T351 et 7474-T7351 [Master's thesis, École Polytechnique de Montréal]. Available
Boucekine, Y. (2006). Étude de la stabilité dimensionnelle du TPO lors du traitement de surface pour l'application d'un revêtement [Master's thesis, École Polytechnique de Montréal]. Available
Boucekine, Y., Sanschagrin, B., & Derdouri, A. (2006, May). Investigation of re-crystallization of injection molded TPO unpainted plaques [Paper]. ANTEC 2006, Charlotte, NC, United States. External link
Boukas, E.-K. (2006). Discrete-time systems with time-varying time delay: Stability and stabilizability. Mathematical Problems in Engineering, 2006, 42489. Available
Boukas, E.-K. (2006). Hᵢₙfᵢₙ stabilization of stochastic hybrid systems with white noise. IMA Journal of Mathematical Control and Information, 23(4), 485-497. External link
Boukas, E.-K. (2006). Manufacturing systems: LMI approach. IEEE Transactions on Automatic Control, 51(6), 1014-1018. External link
Boukas, E.-K. (2006). Output feedback stabilization of stochastic non-linear hybrid systems. IMA Journal of Mathematical Control and Information, 23(2), 137-48. External link
Boukas, E.-K. (2006). Stabilization of Stochastic Hybrid Linear Systems With Noise. Stochastic Analysis and Applications, 24(4), 719-732. External link
Boukas, E.-K. (2006). Stabilization of stochastic singular nonlinear hybrid systems. Nonlinear Analysis-Theory Methods & Applications, 64(2), 217-228. External link
Boukas, E.-K. (2006). Static output feedback control for stochastic hybrid systems: LMI approach. Automatica, 42(1), 183-188. External link
Boukas, E.-K., & Al-Muthairi, N. F. (2006). Delay-dependent stabilization of singular linear systems with delays. International Journal of Innovative Computing Information and Control, 2(2), 283-291. External link
Boukas, E.-K., & El-Hajjaji, A. (2006, June). On stabilizability of stochastic fuzzy systems [Paper]. 2006 American Control Conference, Minneapolis, MN, USA. External link
Boukhili, R., Boukehili, H., Ben Daly, H., & Gasmi, A. (2006). Physical and Mechanical Properties of Pultruded Composites Containing Fillers and Low Profile Additives. Polymer Composites, 27(1), 71-81. External link
Boukhili, R., Taib, A. A., Achiou, S., & Boukehili, H. (2006). Bonded joints with composite adherends. Part II. Finite element analysis of joggle lap joints. International Journal of Adhesion and Adhesives, 26(4), 237-248. External link
Boukhili, R., Taib, A. A., Achiou, S., Gordon, S., & Boukehili, H. (2006). Bonded joints with composite adherends. Part I. Effect of specimen configuration, adhesive thickness, spew fillet and adherend stiffness on fracture. International Journal of Adhesion and Adhesives, 26(4), 226-236. External link
Bourgeois, J. (2006). Le krigeage comme méthode d'approximation pour l'optimisation [Master's thesis, École Polytechnique de Montréal]. Available
Brown, W., Marchand, L., & Derenne, M. (2006). Optimised/harmonised room temperature leakage test procedure for generation of asme & cen code gasket factors - analytical phase. Welding Research Council Bulletin, 508, 84-84. External link
Brown, W., Marchand, L., & LaFrance, T. (2006, July). Bolt Anti-Seize Performance in a Process Plant Environment [Paper]. ASME Joint Pressure Vessels and Piping and ICPVT Conference (PVP-ICPVT 2006), Vancouvert, BC, Canada. External link
Campbell, M., Bougherara, H. A., Yahia, L., Bureau, M. N., Legoux, J.-G., & Denault, J. (2006, November). Biomimetic polymer composites for orthopedic hip implants [Paper]. Materials and Processes for Medical Devices Conference 2005, Boston, MA, United States. Unavailable
Campbell, M., Bureau, M. N., Bougherara, H. A., Denault, J., & Yahia, L. (2006, May). Biomimetic polymer composites for orthopedic implants [Paper]. ANTEC 2006, Charlotte, NC, United States. External link
Carrier, M., Farinas, M.-I., & Garon, A. (2006). Hemodynamic Characteristics of a Mixed Flow Pump Prototype: Progress Report of in Vitro and Acute Animal Experiments. Asaio Journal, 52(4), 373-377. External link
Clin, J., Aubin, C.-É., Parent, S., Ronsky, J., & Labelle, H. (2006, June). Biomechanical modeling of brace design. [Paper]. 6th Biennial Meeting of the International Research Society of Spinal Deformities (IRSSD 2006), Ghent, Belgium. External link
Colin, E., Étienne, S., Pelletier, D., & Borggaard, J. (2006). A General Sensitivity Equation Formulation for Turbulent Heat Transfer. Numerical Heat Transfer. Part B, Fundamentals, 49(2), 125-153. External link
De Langre, E., Riverain, J. L., & Pettigrew, M. J. (2006, July). Random Forces Resulting from Internal Two-Phase Flow on Bends and Tees [Paper]. ASME PVP2006/ICPVT-11 Conference, Vancouver, BC, Canada. External link
Denantes, F., & Bilgen, E. (2006). Counter-Rotating Turbines for Solar Chimney Power Plants. Renewable Energy, 31(12), 1873-1891. External link
Desroches, G., Aubin, C.-É., & Rivard, C.-H. (2006, June). Biomechanical modeling of anterior spone instrumentation in AIS [Paper]. 6th Biennial Meeting of the International Research Society of Spinal Deformities (IRSSD 2006), Ghent, Belgium. External link
Drouin, P. (2006). Simulation d'un procédé de mise en forme par grenaillage aux ultrasons avec billes [Master's thesis, École Polytechnique de Montréal]. Available
Dubé, J. F., Guibault, F., Vallet, M.-G., & Trépanier, J.-Y. (2006, January). Turbine blade reconstruciton and optimization using subdivision surfaces [Paper]. 44th AIAA Aerospace Sciences Meeting and Exhibit. External link
Dusseault, J., Tam, S. K., Menard, M., Polizu, S., Jourdan, G., Yahia, L., & Halle, J. P. (2006). Evaluation of Alginate Purification Methods: Effect on Polyphenol, Endotoxin, and Protein Contamination. Journal of Biomedical Materials Research. Part A, 76A(2), 243-251. External link
Duvigneau, R., & Pelletier, D. (2006). On Accurate Boundary Conditions for a Shape Sensitivity Equation Method. International Journal for Numerical Methods in Fluids, 50(2), 147-164. External link
Duvigneau, R., & Pelletier, D. (2006). A Sensitivity Equation Method for Fast Evaluation of Nearby Flows and Uncertainty Analysis for Shape Parameters. International Journal of Computational Fluid Dynamics, 20(7), 497-512. External link
Duvigneau, R., Pelletier, D., & Borggaard, J. (2006). An Improved Continuous Sensitivity Equation Method for Optimal Shape Design in Mixed Convection. Numerical Heat Transfer. Part B, Fundamentals, 50(1), 1-24. External link
Eça, L., Hoekstra, M., Hay, A., & Pelletier, D. (2006, July). Accomplishments and Challenges in Verification & Validation : On the Construction of Manufactured Solutions for One and Two-Equation Eddy-Viscosity Models [Paper]. 7th World Congress on Computational Mechanics, Los Angeles, California. Unavailable
Eça, L., Hoekstra, M., Hay, A., & Pelletier, D. (2006, October). A manufactured solution for two-dimensional steady wall-bounded incompressible turbulent flow [Paper]. 2nd Workshop on CFD Uncertainty Analysis, Lisbon, Portugal. Unavailable
Eça, L., Hoekstra, M., Hay, A., & Pelletier, D. (2006, July). A Manufactured Solution for Verification of Turbulent Flow Solvers Using Eddy-Viscosity Models [Paper]. 7th World Congress on Computational Mechanics, Los Angeles, California. Unavailable
Eca, L., Hoekstra, M., Hay, A., & Pelletier, D. (2006). Manufactured solutions for one-equation turbulence models in a two-dimensional steady wall-bounded incompressible turbulent flow. (Technical Report n° EPM-RT-2006-02). Available
Eça, L., Hoekstra, M., Hay, A., & Pelletier, D. (2006, July). On the Construction of Manufactured Solutions for one and Two-equation Eddy-viscosity Models [Paper]. 7th World Congress on Computational Mechanics, Los Angeles, California. Unavailable
Edmond, P., Pelletier, D., Étienne, S., & Borggaard, J. (2006, January). Application of a sensitivity equation method to compressible subsonic impinging jets [Paper]. 44th AIAA Aerospace Sciences Meeting and Exhibit, Reno, Nevada. External link
El-Rich, M., Aubin, C.-É., Villemure, I., & Labelle, H. (2006, June). A biomechanical study of L5-S1 low-grade isthmic spondylolisthesis using a personalized finite element model [Paper]. 6th Biennial Meeting of the International Research Society of Spinal Deformities (IRSSD 2006), Ghent, Belgium. External link
Elektorowicz, M., Qasaimeh, A., & Balazinski, M. (2006, April). Optimisation of the Constructed Wetland Design Using a Fuzzy-Knowledge Approach [Paper]. 35th WEAO Annual Technical Symposium and OPCEA Exhibition, Toronto. Unavailable
Esmailzadeh, M., Lakis, A. A., Thomas, M., & Marcouiller, L. (2006). Three-dimensional modeling of curved structures partially or completely containing and/or submerged in fluid. (Technical Report n° EPM-RT-2006-06). Available
Étienne, S., & Pelletier, D. Adaptive Solution of Some Steady-State Fluid-Structure Interactions [Paper]. Computational Fluid Dynamics 2004. External link
Étienne, S., Hay, A., Garon, A., & Pelletier, D. (2006, June). Shape sensitivity analysis of fluid-structure interaction problems [Paper]. 36th AIAA Fluid Dynamics Confernce, San Francisco, CA, United States. External link
Étienne, S., Pelletier, D., & Garon, A. (2006, January). A monolithic formulation for unsteady fluid-structure interactions [Paper]. 44th AIAA Aerospace Sciences Meeting and Exhibit, Reno, Nevada. External link
Farinas, M.-I., Garon, A., Lacasse, D., & N'Dri, K. D. (2006). Asymptotically consistent numerical approximation of hemolysis. Transactions of the ASME. Journal of Biomechanical Engineering, 128(5), 688-696. External link
Fauteux, C., Longtin, R., Pegna, J., & Boman, M. (2005, May). Microstructure Investigation and Heat Treatment of Nanocrystalline Laser-Deposited Carbon Fibers [Paper]. European Materials Research society 2005 - Symposium-J: Advances in Laser and Lamp Processing of Functional Materials (EMRS 2005 Symposium J), Strasbourg, France. Published in Applied Surface Science, 252(13). External link
Galo, C. R. (2006). Machining strategies of an inconel 718 shaft [Master's thesis, École Polytechnique de Montréal]. Available
Ghafar-Zadeh, E., Sawan, M., & Therriault, D. (2006, May). Direct-write CMOS-based Laboratory-On-Chip [Paper]. NSTI Nanotechnology Conference and Trade Show (NSTI Nanotech 2006), Boston, USA. Unavailable
Ghafar-Zadeh, E., Sawan, M., & Therriault, D. (2006, October). Microelectrofluidic packaging for CMOS based laboratory-on-chips [Paper]. International Electronics Packaging Symposium, Nyskayuna, N.Y.. Unavailable
Goduguchinta, R. K. (2006). Axial convection enhanced laser CVD of carbon rods [Ph.D. thesis, École Polytechnique de Montréal]. Available
Gravelle, A., Ross, A., Pettigrew, M. J., & Mureithi, N. W. (2006, July). Damping of Tubes with Internal Two-Phase Flow [Paper]. ASME Pressure Vessels and Piping Conference (PVP 2006) and ICPVT-11 Conference, Vancouver, BC, Canada. External link
Grunhagen, T., Wilde, G., Mokhbi Soukane, D., Shirazi-Adl, A., & Urban, J. P. G. (2006). Nutrient supply and intervertebral disc metabolism. Journal of Bone and Joint Surgery, 88-A, 30-35. External link
Hassane, A., Baron, L., & Boukas, E.-K. (2006, February). Novel open architecture for high speed CNC [Paper]. 92nd Annual Meeting of the Pulp and Paper Technical Association of Canada (PAPTAC 2006). Unavailable
Hay, A., Étienne, S., Duvigneau, R., & Pelletier, D. (2006, January). Evaluation of Flows on Nearby Geometries by a Shape Sensitivity Equation Method [Paper]. 44th AIAA Aerospace Sciences Meeting and Exhibit, Reno, Nevada. External link
Hébert, A. (2006). High order diamond differencing schemes. Annals of Nuclear Energy, 33(17-18), 1479-1488. External link
Hébert, A. (2006). The search for superconvergence in spherical harmonics approximations. Nuclear Science and Engineering, 154(2), 134-173. External link
Hébert, A. (2006, September). Towards Version4 [Paper]. Physics of Reactors Conference: Advances in Nuclear Analysis and Simulation (PHYSOR 2006), Vancouver, BC. Unavailable
Hosseiny, M. (2006). Comparaison des outils Guhring et Iscar dans le perçage de composites à matrice d'aluminium [Master's thesis, École Polytechnique de Montréal]. Available
Hristova, H., Étienne, S., Pelletier, D., & Borggaard, J. (2006). A continuous sensitivity equation method for time-dependent incompressible laminar flows. International Journal for Numerical Methods in Fluids, 50(7), 817-844. External link
Hristova, H., Étienne, S., Pelletier, D., & Borggaard, J. Sensitivity Analysis of Transient Incompressible Laminar Flows [Paper]. Computational Fluid Dynamics 2004. External link
Hubert, P., Haider, M., Lessard, L., Ruiz, E., & Trochu, F. (2006, March). Integrated Approach for Class A Surface Finish of Automotive Components Manufactured by RTM [Paper]. 27th International SAMPE Europe Conference, Paris, France. Unavailable
Ilinca, F., Hay, A., & Pelletier, D. (2006, June). Shape Sensitivity Analysis of unsteady Laminar flow Past a Cylinder in Ground Proximity [Paper]. 3rd AIAA Flow Control Conference, San Francisco, California. External link
Iolova, K., Bernier, M., & Nichols, L. (2006, May). Quantifying the energy impact of a variable flow pump in a ground-coupled heat pump system [Paper]. Conference eSim 2006 : IBPSA-Canada's 4. biennial building performance simulation conference, Toronto, Can. Unavailable
Jasmin, S. (2006). Détermination de sources de chaleur et de taux de croissance biochimiques avec convection naturelle en milieu poreux à l'aide d'une méthode inverse [Ph.D. thesis, École Polytechnique de Montréal]. Available
Jerbi, L. (2006). Mise en valeur d'une nouvelle technique de caractérisation de la résistance à l'endommagement des réfractaires soumis à des conditions de variation de température [Master's thesis, École Polytechnique de Montréal]. Available
Jiang, H. (2006). Optimal control of induction heating for semi-solid alloy forming [Ph.D. thesis, École Polytechnique de Montréal]. Available
Jolly, P., & Marchand, L. (2006, July). Leakage predictions for static gasket based on the porous media theory [Paper]. ASME PVP2006/ICPVT-11 Conference, Vancouver, BC, Canada. External link
Kannan, S., Kishawy, H. A., & Balazinski, M. (2006, October). Analysis of abrasive wear during machining metal matrix composites [Paper]. Aerospace Materials and manufacturing Process: Emerging Materials, Manufacturing and Repair Techniques, Montréal, Québec. Unavailable
Kannan, S., Kishawy, H. A., & Balazinski, M. (2006). Flank Wear Progression During Machining Metal Matrix Composites. Journal of Manufacturing Science and Engineering, 128(3), 787-791. External link
Karthikeyan, R., Le Tellier, R., & Hébert, A. (2006, September). Estimation of coolant void reactivity for ACR-type lattices using DRAGON and validation using MCNP5 and TRIPOLI-4.3 [Paper]. Physics of Reactors Conference: Advances in Nuclear Analysis and Simulation (PHYSOR 2006), Vancouver, BC. Unavailable
Kerboua, Y. (2006). Modélisation des systèmes de plaques en interaction avec un fluide au repos ou en écoulement [Ph.D. thesis, École Polytechnique de Montréal]. Available
Kerboua, Y., Lakis, A. A., Thomas, M., & Marcouiller, L. (2006). Analyse dynamique des systèmes de plaques en intéraction avec un fluide et applications. (Technical Report n° EPM-RT-2006-01). Available
Kerboua, Y., Lakis, A. A., Thomas, M., & Marcouiller, L. (2006). Vitesse critique induite par un écoulement potentiel sur un système de plaques. (Technical Report n° EPM-RT-2006-05). Available
Kerboua, Y., Lakis, A. A., Thomas, M., Marcouiller, L., & Toorani, M. H. (2006, November). Dynamic analysis of coupled fluid-structure systems [Paper]. 2nd WSEAS International Conference on Applied and Theoretical Mechanics (MECHANICS 2006), Venice, Italy. External link
Khoukhi, A., Baron, L., & Balazinski, M. A Decoupled Approach to Optimal Time Energy Trajectory Planning of Parallel Kinematic Machines [Paper]. Robot Design, Dynamics, and Control (Romansy 2006). External link
Khoukhi, A., Baron, L., Balazinski, M., & Demirli, K. (2006, June). Fuzzy-Neuro Optimal Time-Energy Control of a Three Degrees of Freedom Planar Manipulator [Paper]. Annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2006), Montréal, Québec. External link
Kishawy, H. A., Haglund, A., & Balazinski, M. (2006). Modelling of Material Side Flow in Hard Turning. CIRP Annals - Manufacturing Technology, 55(1), 85-88. External link
Komgom, N. C., Mureithi, N. W., & Lakis, A. A. (2006). Literature review of fault detection using support vector machines or artificial neural networks augmented by genetic aglorithms. (Technical Report). Unavailable
Koutchouk, M., Aubin, C.-É., & Gou, M. (2006). Computer modeling of lift trucks and operators to simulate lateral tipover. International Journal of Crashworthiness, 11(5), 485-493. External link
Kuhn, M., Napporn, T., Meunier, M., Vengallatore, S., & Therriault, D. (2006, May). Microfabrication de piles SOFC à chambre unique par écriture directe [Paper]. 74e Congrès de l'ACFAS, Montréal, Québec. Unavailable
Kuhn, M., Napportn, T., Meunier, M., Therriault, D., & Vengallatore, S. (2006, November). Direct-Write Microfabrication of Single-Chamber Solid Oxide Fuel Cells with Interdigitated Electrodes [Paper]. MRS Fall Meeting, Boston, Ma.. External link
Kummert, M., & Bernier, M. (2006). Benny Farm-simulation of the hybrid solar-GCHP-boiler system. (Technical Report). Unavailable
Kummert, M., & Bernier, M. (2006, December). Sub-hourly simulation of residential ground coupled heat pump systems [Paper]. 7th International Conference on System Simulation in Buildings, Liège, Belgium. Unavailable
Kummert, M., Adré, P., & Argiriou, A. A. (2006). Comparing control strategies using experimental and simulation results : methodology and application to heating control of passive solar buildings. HVAC&R Research, 12(suppl. 1), 715-737. External link
Kummert, M., Bernier, M., & Roy, M. (2006, May). Using simulation to validate and optimize the design of a hybrid solar-GCHP system [Paper]. Conference eSim 2006 : IBPSA-Canada's 4 : biennial building performance simulation conference, Toronto, Can. Unavailable
Lalonde, N. M., Dansereau, J., Pauget, P., Cinquin, P., & Aissaoui, R. (2006). Accessing the influence of repositioning on the pelvis' 3-D orientation in wheelchair users. IEEE Transactions on Neural Systems and Rehabilitation Engineering, 14(1), 76-82. External link
Laurier Chapleau, S. (2006). Vérification du banc d'essai d'émulation d'amarrage de satellites de l'agence spatiale canadienne [Master's thesis, École Polytechnique de Montréal]. Available
Le Tellier, R., & Hébert, A. (2006). On the integration scheme along a trajectory for the characteristics method. Annals of Nuclear Energy, 33(14-15), 1260-1269. External link
Le Tellier, R., Hébert, A., & Marleau, G. (2006, September). The Implementation of a 3-D Characteristics Solver for the Generation of Incremental Cross Section for Reactivity Devices in a CANDU Reactor [Paper]. Advances in Nuclear Analysis and Simulation (PHYSOR 2006), Vancouver, Canada. Unavailable
Le Tellier, R., Hébert, A., Santamarina, A., & Litaize, O. (2006, September). Benchmarking of the characteristics method combined with advanced self-shielding models on BWR-MOX assemblies [Paper]. Physics of Reactors Conference: Advances in Nuclear Analysis and Simulation (PHYSOR 2006), Vancouver, BC. Unavailable
Limodin, N., & Verreman, Y. (2006, May). Fatigue strength imporvement of 4140 steel by gas nitriding [Paper]. 9th International Fatigue Congress, Atlanta, Georgia, USA. Unavailable
Limodin, N., & Verreman, Y. (2006). Fatigue strength improvement of a 4140 steel by gas nitriding: Influence of notch severity. Materials Science and Engineering. A, Structural Materials Properties Microstructure and Processing, 435-436, 460-7. External link
Liu, H. P., Boukas, E.-K., Sun, F. C., & Ho, D. W. C. (2006). Controller Design for Markov Jumping Systems Subject to Actuator Saturation. Automatica, 42(3), 459-465. External link
Liu, H. P., Sun, F. C., & Boukas, E.-K. (2006). Robust Control of Uncertain Discrete-Time Markovian Jump Systems With Actuator Saturation. International Journal of Control, 79(7), 805-812. External link
Mahidjiba, A., Bennacer, R., & Vasseur, P. (2006). Flows in a Fluid Layer Induced by the Combined Action of a Shear Stress and the Soret Effect. International Journal of Heat and Mass Transfer, 49(7-8), 1403-1411. External link
Mahidjiba, A., Robillard, L., & Vasseur, P. (2006). Onset of penetrative convection of cold water in a porous layer under mixed boundary conditions. International Journal of Heat and Mass Transfer, 49(17-18), 2820-2828. External link
Mahvash Mohammadi, A. (2006). Two-phase flow pattern identification using hidden Markov model [Master's thesis, École Polytechnique de Montréal]. Available
Majdouline, Y., Aubin, C.-É., & Labelle, H. (2006, June). Objectives for correction and related instrumentation strategies in scoliosis surgery for Lenke curve types 2, 3 and 5. [Paper]. 6th Biennial Meeting of the International Research Society of Spinal Deformities (IRSSD 2006), Ghent, Belgium. External link
Marduel, X., Tribes, C., & Trépanier, J.-Y. (2006). Variable-fidelity optimization: Efficiency and robustness. Optimization and Engineering, 7(4), 479-500. External link
Margarit, L. (2006). Étude expérimentale du perçage des composites à matrice d'aluminium renforcée de particules de céramique et de graphite revêtu de nickel [Master's thesis, École Polytechnique de Montréal]. Available
Martin, A., Trépanier, J.-Y., Reggio, M., & Guo, X. (2006, September). Transient ablation regime in circuit-breakers [Paper]. 16th International Conference on Gas Discharges, Xi'an, People's Republic of China. Unavailable
Martin, E., Manceur, A., Polizu, S., Savadogo, O., Wu, M. H., & Yahia, L. (2006). Corrosion Behaviour of a Beta-Titanium Alloy. Bio-Medical Materials and Engineering, 16(3), 171-182. External link
Mascle, C. (2006, June). Life-cycle features for mechanical products analysis and simulations [Paper]. 4th Annual International Industrial Simulation Conference, Palermo, Italy. Unavailable
Mascle, C., & Sy, M. (2006, July). A data base for the representation of life-cycle features in mechanical products [Paper]. 16th CIRP International Design Conference, Kananaskis, Canada. Unavailable
Mbaye, M., & Bilgen, E. (2006). Natural convection in composite systems with phase change materials. Heat and Mass Transfer, 42(7), 636-644. External link
Merlet, S., Thomas, M., Lakis, A. A., & Marcouiller, L. (2006). Conception d'un banc d'essais pour modèles de turbines hydrauliques. (Technical Report). Unavailable
Mesfar, W., & Shirazi-Adl, A. (2006). Biomechanics of changes in ACL and PCL material properties or prestrains in flexion under muscle force-implications in ligament reconstruction. Computer Methods in Biomechanics and Biomedical Engineering, 9(4), 201-209. External link
Mesfar, W., & Shirazi-Adl, A. (2006). Knee joint mechanics under quadriceps-hamstrings muscle forces are influenced by tibial restraint. Clinical Biomechanics, 21(8), 841-848. External link
Mesfar, W., & Shirazi-Adl, A. (2006, July). Role of tibial constraint on knee joint biomechanics under muscle loads [Abstract]. 5th World Congress of Biomechanics, Munich, Germany. Published in Journal of Biomechanics, 39. External link
Mokhbi Soukane, D., Shirazi-Adl, A., & Urban, J. P. G. (2006, March). Nonlinear coupled diffusion of glucose, oxygen and lactic acid in the human intervertebral disc [Paper]. Transactions of the 52nd Orthopedic Research Society, Chicago, Illinois. Unavailable
Mokhbi-Soukane, D., Shirazi-Adl, A., & Urban, J. P. G. (2006, June). Coupled diffusion of nutrients in the human disc [Paper]. IEEE International Symposium on Subscriber Loops and Services, Bergen, Norway. Unavailable
Mokhtarzadeh, H., Farahmand, F., Parnianpour, M., Malekipour, F., Shirazi-Adl, A., & Arjmand, N. (2006, January). Mathematical and finite element modeling of spine to investigate the effects of intra-abdominal pressure and activation of muscles around abdomin on the spinal stability [Paper]. 8th Biennial ASME Conference on Engineering Systems Design and Analysis, Torino, Italy. External link
Mureithi, N. W., Shahriary, S., & Pettigrew, M. J. (2006, November). Fluidelastic Instability Forces in a Triangular Tube Bundle Subjected to Two-Phase Cross Flow [Paper]. 5th International Steam Generator Conference, Toronto, Ontario. Unavailable
N'Dri, K. D., Garon, A., Farinas, M.-I., & Urquiza, J. (2006). Low-order bubble-type stabilization. Communications in Numerical Methods in Engineering, 22(7), 753-765. External link
Najar, E. S., Leduc, A., Zoulgami, M., Barbeau, J., & Yahia, L. (2006). Surface characterization of streptococcus mutans biofilms grown on polyethylene and beta titanium. Journal of Applied Biomaterials & Biomechanics, 4, 120-124. External link
Nguyen-Quang, T. (2006). Etude de la bioconvection gravitactique en milieux poreux [Ph.D. thesis, École Polytechnique de Montréal]. Available
O'Dowd, F., Lévesque, M., & Gilchrist, M. D. (2006). Analysis of fibre orientation effects on injection moulded components. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 220(12), 1909-1921. External link
Ouahabi, A., Thomas, M., & Lakis, A. A. (2006, October). Détection de fissures de respiration de fatigue par excitation harmonique et analyse temps-fréquence [Paper]. 24th Seminar on Machinery Vibration (CMVA 2006), Montréal, Québec. External link
Ouahabi, A., Thomas, M., & Lakis, A. A. (2006, July). Detection of damages in beams and composite plates by harmonic excitation and time-frequency analysis [Paper]. 3rd European Workshop on Structural Health Monitoring, Granada, Spain. Unavailable
Ouriemi, M., Vasseur, P., Bahloul, A., & Robillard, L. (2006). Natural Convection in a Horizontal Layer of a Binary Mixture. International Journal of Thermal Sciences, 45(8), 752-759. External link
Oztop, H., & Bilgen, E. (2006). Natural Convection in Differentially Heated and Partially Divided Square Cavities With Internal Heat Generation. International Journal of Heat and Fluid Flow, 27(3), 466-475. External link
Ozturk, I. T., Karabay, H., & Bilgen, E. (2006). Thermo-Economic Optimization of Hot Water Piping Systems: a Comparison Study. Energy, 31(12), 2094-2107. External link
Painchaud-Ouellet, S., Tribes, C., Trépanier, J.-Y., & Pelletier, D. (2006). Airfoil shape optimization using a nonuniform rational B-splines parameterization under thickness constraint. AIAA Journal, 44(10), 2170-2178. External link
Palm, S., Bey-Oueslati, R., Martel, S., & Therriault, D. (2006, December). Fabrication de microcaloducs à section triangulaire par écriture directe [Paper]. 3rd Microfluidics French Conference (Microfluidics 2006), Toulouse, France. Unavailable
Paquet, D. (2006). Modélisation des contraintes résiduelles thermiques et étude de leur effet sur la vie en fatigue de l'acier inoxydable austénitique 304L [Master's thesis, École Polytechnique de Montréal]. Available
Pegna, J., & Zhu, J. (2006). Quantization effects in shallow powder bed vibrations. In Guran, A., Smirnov, A. L., Steigmann, D. J., & Vaillancourt, R. (eds.), Advances in mechanics of solids (229-257). External link
Pelletier, D. (2006, July). Manufactured Solutions and Verification of Adaptive codes and simulations, Mini-symposium on Verification & Validation [Paper]. 7th World Congress on Computational Mechanics, Los Angeles, California. Unavailable
Pelletier, D., & Roache, P. J. (2006). Verification and Validation of Computational Heat Transfer. In Handbook of Numerical Heat Transfer (417-442). External link
Perron, J., Corbiere, M., Coallier, J. C., & Cloutier, G. (2006). The School-to-Work Transition: a Multitheoretical and Longitudinal Model. Psychologie du travail et des organisations, 12(3), 211-224. External link
Petro, E., Reggio, M., & Abanto, J. (2006, October). Airflow prediction and fire and smoke propagation in large enclosed structures [Paper]. International Technical Congress on Computational Simulation Models in fire Engineering and Research, Santander, Spain. Unavailable
Pettigrew, M. J., Violette, R., & Mureithi, N. W. (2006, November). Fluidelastic Instability of a Tube Bundle Preferentially Flexible in the Flow Direction to Simulate U-Bend In-Plane Vibration [Paper]. 5th International Steam Generator Conference, Toronto, Ontario. Unavailable
Picard, D., Delisle, V., Bernier, M., & Kummert, M. (2006, August). On the Combined Effect of Wastewater Heat Recovery and Solar Domestic Hot Water Heating [Paper]. Canadian Solar Buildings Conference, Montréal, Québec. Unavailable
Pirker, S., McFarlane, C., & Rigaud, M. (2006). FIRE - the Federation for International Refractory Research and Education. RHI Bulletin: The Journal of Refractory Innovations, 28(1), 43-45. Unavailable
Plourde, F., Cheriet, F., & Dansereau, J. (2006, June). Semi-automatic detection of scoliotic rib borders using chest radiographs. [Paper]. 6th Biennial Meeting of the International Research Society of Spinal Deformities, Ghent, Belgium. External link
Polizu, S., Maugey, M., Poulin, S., Poulin, P., & Yahia, L. (2005, October). Nanoscale surface of carbon nanotube fibers for medical applications: Structure and chemistry revealed by TOF-SIMS analysis [Paper]. 15th International Conference on Secondary Ion Mass Spectrometry (SIMS 2005), Manchester, UK. Published in Applied Surface Science, 252(19). External link
Polizu, S., Savadogo, O., Poulin, P., & Yahia, L. (2006). Applications of Carbon Nanotubes-Based Biomaterials in Biomedical Nanotechnology. Journal of Nanoscience and Nanotechnology, 6(7), 1883-1904. External link
Pomerleau, J., & Sanschagrin, B. (2006). Injection molding shrinkage of PP: experimental progress. Polymer Engineering and Science, 46(9), 1275-1283. External link
Poueymirou-Bouchet, D., Tribes, C., & Trépanier, J.-Y. A Nurbs-Based Shape Optimization Method for Hydraulic Turbine Stay Vane [Paper]. Computational Fluid Dynamics. External link
Poulin, S., Durrieu, M. C., Polizu, S., & Yahia, L. (2005, October). Bioactive molecules for biomimetic materials: Identification of RGD peptide sequences by TOF-S-SIMS analysis [Paper]. International Conference on Secondary Ion Mass Spectrometry (SIMS 2005), Manchester, UK. Published in Applied Surface Science, 252(19). External link
Pouponneau, P., Yahia, L., Merhi, Y., Epure, L. M., & Martel, S. (2006, August). Biocompatibility of candidate materials for the realization of medical microdevices [Paper]. 28th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC 2006), New York, NY, USA. External link
Prokoshkin, S. D., Korotitskiy, A. V., Tamonov, A. V., Khmelevskaya, I. Y., Brailovski, V., & Turenne, S. (2006). Comparative X-Ray and Time-of-Flight Neutron Diffraction Studies of Martensite Crystal Lattice in Stressed and Unstressed Binary Ti-Ni Alloys. Materials Science and Engineering: A, 438, 549-552. External link
Prud'homme, M., & Jasmin, S. (2006, August). Inverse determination of biochemical model parameters in porous medium convection with biochemical heating [Paper]. International Heat Transfer Conference IHTC 13, Sydney, Australia. External link
Prud'homme, M., & Jasmin, S. (2006). Inverse solution for a biochemical heat source in a porous medium in the presence of natural convection. Chemical Engineering Science, 61(5), 1667-1675. External link
Puente, L. R., Reggio, M., & Guibault, F. (2006, October). Optimizing the shape of a hydraulic turbine draft tube [Optimizacion de la forma de un tubo aspirador una turbina hidraulica]. [Paper]. 22nd Latin America International Symposium on Hydraulic Structures, Ciudad Guayana, Venezuela. Unavailable
Rakoto Ramambason, D. S. (2006). Effet d'un champ magnétique sur la convection naturelle d'un fluide binaire en milieu poreux confiné [Master's thesis, École Polytechnique de Montréal]. Available
Raouf, J., & Boukas, E.-K. (2006, June). Observer-based controller design of Markovian jump bilinear descriptor systems [Paper]. 2006 American Control Conference, Minneapolis, MN, USA. External link
Rémillard, V. (2006). Systèmes non linéaires : une approche par la logique floue appliquée à la plate-forme de Gough-Stewart [Master's thesis, École Polytechnique de Montréal]. Available
Ren, Q. (2006). Type-2 Takagi-Sugeno-Kang fuzzy logic modeling using subtractive clustering [Master's thesis, École Polytechnique de Montréal]. Available
Ren, Q., Baron, L., & Balazinski, M. (2006, June). Type-2 Takagi-Sugeno-Kang Fuzzy Logic Modeling using Subtractive Clustering [Paper]. Annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2006), Montréal, Québec. External link
Rigaud, M., Balamurugan, K., & Sankaranarayanane, K. (2006). Rheological and thermomechanical behaviour of steel fibre reinforced carbon containing castables. Advances in Science and Technology, 45, 2278-2283. External link
Rigaud, M., Gault, C., Poirier, J., & Pirker, S. (2006). La fédération internationale pour l'éducation et la recherche en réfractaires. Industrie Céramique et Verrière (1006), 63-66. Unavailable
Rigaud, M., Gault, C., Poirier, J., & Pirker, S. (2006). International Federation for Refractory Education and Research: Fire. Silicates Industriels, 71(5-6), 79-80. Unavailable
Riverin, J. L., de Langre, E., & Pettigrew, M. J. (2006). Fluctuating forces caused by internal two-phase flow on bends and tees. Journal of Sound and Vibration, 298(4-5), 1088-1098. External link
Robillard, L., Bahloul, A., & Vasseur, P. (2006). Hydromagnetic natural convection of a binary fluid in a vertical porous enclosure. Chemical Engineering Communications, 193(11), 1431-1444. External link
Robitaille, M. (2006). Analyse biomécanique de stratégies d'instrumentation chirurgicale du rachis scoliotique [Master's thesis, École Polytechnique de Montréal]. Available
Robitaille, M., Aubin, C.-É., & Labelle, H. (2006, June). Biomechanical assessment of variable instrumentation strategies in adolescent idiopathic scoliosis: preliminary analysis of 3 patients and 6 scenarios. [Paper]. 6th Biennial Meeting of the International Research Society of Spinal Deformities (IRSSD 2006), Ghent, Belgium. External link
Rodrigues, L., & Boukas, E.-K. (2006). Piecewise-linear H∞ controller synthesis with applications to inventory control of switched production systems. Automatica, 42(8), 1245-1254. External link
Rodriguez, M. (2006). Simulation et analyse numériques de la dynamique de la trainée en aval d'un cylindre soumis à des oscillations forcées [Master's thesis, École Polytechnique de Montréal]. Available
Rodriguez, M., & Mureithi, N. W. (2006, July). Cylinder wake dynamics in the presence of stream-wise harmonic forcing [Paper]. ASME Pressure Vessels and Piping Conference (PVP 2006) and ICPVT-11 Conference, Vancouver, BC, Canada. External link
Ruiz, E., & Trochu, F. (2006). Multi-Criteria Thermal Optimization in Liquid Composite Molding to Reduce Processing Stresses and Cycle Time. Composites Part A: Applied Science and Manufacturing, 37(6), 913-924. External link
Ruiz, E., Achim, V., Breard, J., Chatel, S., & Trochu, F. (2006, July). A fast numerical approach to reduce void formation in liquid composite molding [Paper]. 8th International Conference on Flow Processes in Composite Materials, Mines de Douai, France. External link
Ruiz, E., Achim, V., Soukane, S., Trochu, F., & Breard, J. (2006). Optimization of Injection Flow Rate to Minimize Micro/Macro-Voids Formation in Resin Transfer Molded Composites. Composites Science and Technology, 66(3-4), 475-486. External link
Ruiz, E., Chatel, S., & Trochu, F. (2006, July). A Simplified Numerical Approach to Simulate Resin Transfer Molding with a Dispersion Medium [Paper]. 8th International Conference on Flow Processes in Composite Materials, Mines de Douai, France. External link
Ruiz, E., Waffo, F., Owens, J., Billotte, C., & Trochu, F. (2006, July). Modeling of Resin Cure Kinetics for mOlding Cycle Optimization [Paper]. 8th International Conference on Flow Processes in Composite Materials, Mines de Douai, France. External link
Saberian, J.-R. (2006). Mesure des écarts cinématiques articulaires d'un axe de rotation [Master's thesis, École Polytechnique de Montréal]. Available
Shirazi-Adl, A. (2006). Analysis of large compression loads on lumbar spine in flexion and in torsion using a novel wrapping element. Journal of Biomechanics, 39(2), 267-275. External link
Shirazi-Adl, A., & Mesfar, W. (2006, March). Tibial restraint influences cruciate ligament forces in the knee joint under extensor/flexor moments [Paper]. Transactions of the 52nd Orthopedic Research Society, Chicago, Illinois. Unavailable
Sim, W. G., Bae, B. M., Mureithi, N. W., & Pettigrew, M. J. (2006, July). Characteristics of Two-Phase Flows in Vertical Pipes [Paper]. ASME Pressure Vessels and Piping Conference (PVP 2006) and ICPVT-11 Conference, Vancouver, BC, Canada. External link
Slamani, M., Mayer, J. R. R., Balazinski, M., & Engin, S. (2006, June). Characterization of Machine Tools for Boring by Highspeed Orbital Milling [Paper]. 2nd International Conference on High Performance Cutting, University of British Columbia, Vancouver, Canada. Unavailable
Smith, J., Pirker, S., McFarlane, C., Bittencourt, L., Pandolfelli, V., & Rigaud, M. (2006). FIRE-th Federation for International Refractory Research and Education. Refractories Applications and News, 11(3), 8-11. Unavailable
Soukane, S., & Trochu, F. (2006). Application of the level set method to the simulation of resin transfer molding. Composites Science and Technology, 66(7-8), 1067-1080. External link
Stokes, I. A. F., & Aubin, C.-É. (2006). Biomechanics of scoliosis. In Encyclopedia of Medial Devices and Instrumentation (122-137). External link
Surcel, M.-D., & Gou, M. (2006). Étude par simulation mathématique de l'efficacité d'un dispositif de retenue pour enfant selon la configuration. Assurances et gestion des risques, 73(4), 545-575. External link
Sy, M., & Mascle, C. (2006, May). Life cycle design and manufacturing approaches [Paper]. 6th International Conference on Integrated Design and Manufacturing in Mechanical Engineering, Grenoble, France. Unavailable
Tam, S. K., De Haan, B., Hallé, J. P., Yahia, L., & de Vos, P. (2006). The adsorption of proteins to micro-capsules as an indicator of their biocompatibility. Canadian Journal of Diabetes, 30(3), S1-S1. Unavailable
Tam, S. K., Dusseault, J., Polizu, S., Menard, M., Halle, J. P., & Yahia, L. (2006). Impact of Residual Contamination on the Biofunctional Properties of Purified Alginates Used for Cell Encapsulation. Biomaterials, 27(8), 1296-1305. External link
Tam, S. K., Hallé, J. P., Yahia, L., & deVos, P. (2006, October). The adsorption of immunoglobulin on alginate-based microcapsules [Paper]. XIVth International Workshop on Bioencapsulation, Lausanne, Switzerland. External link
Tchon, K. F., & Camarero, R. Quad-Dominant Mesh Adaptation Using Specialized Simplicial Optimization [Paper]. 15th International Meshing Roundtable. External link
Tchon, K.-F., Dompierre, J., Vallet, M.-G., Guibault, F., & Camarero, R. (2006). Two-dimensional metric tensor visualization using pseudo-meshes. Engineering with Computers, 22(2), 121-131. External link
Toorani, M. H., & Lakis, A. A. (2006, June). Coupled fluid-structure interaction in composite cylindrical shells conveying axial flow [Paper]. 3rd European Conference on Computational Mechanics, Solids, Structures and Coupled Problems in Engineering, Lisbon, Portugal. Unavailable
Toorani, M. H., & Lakis, A. A. (2006). Free vibrations of non-uniform composite cylindrical shells. Nuclear Engineering and Design, 236(17), 1748-1758. External link
Toorani, M. H., & Lakis, A. A. (2006). Swelling effect on the dynamic behaviour of composite cylindrical shells conveying fluid. International Journal for Numerical Methods in Fluids, 50(4), 397-420. External link
Tremblay, D., Étienne, S., & Pelletier, D. (2006, June). Code verification and the method of manufactured solutions for fluid-structure interaction problems [Paper]. 36th AIAA Fluid Dynamics Confernce, San Francisco, CA, United States. External link
Tribes, C., & Trépanier, J.-Y. (2006, September). Distributed optimizations using optimal solution sensitivity [Paper]. 11th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Portsmouth, VA, United States. External link
Trochu, F., Ruiz, E., Achim, V., & Soukane, S. (2006). Advanced numerical simulation of liquid composite molding for process analysis and optimization. Composites Part A: Applied Science and Manufacturing, 37(6 SPEC ISS), 890-902. External link
Trudel-Boucher, D., Fisa, B., Denault, J., & Gagnon, P. (2006). Experimental investigation of stamp forming of unconsolidated commingled E-glass/polypropylene fabrics. Composites Science and Technology, 66(3-4), 555-570. External link
Urquiza, J. M., Dri, D. N., Garon, A., & Delfour, M. C. (2006). A Numerical Study of Primal Mixed Finite Element Approximations of Darcy Equations. Communications in Numerical Methods in Engineering, 22(8), 901-915. External link
Vadean, A., Leray, D., & Guillot, J. (2006). Bolted joints for very large bearings - Numerical model development. Finite Elements in Analysis and Design, 42(4), 298-313. External link
Vasilevskiy, D., Roy, F., Renaud, E., Masut, R. A., & Turenne, S. (2006, August). Mechanical Properties of the Interface Between Nickel Contact and Extruded (Bi₁₋ₓSbₓ)₂(Te₁₋ySey)₃ [Paper]. 25th International Conference on Thermoelectrics, Vienne, Autriche. External link
Verreman, Y., & Limodin, N. (2006, May). Fatigue life prediction of V-notched components [Paper]. 9th International Fatigue Congress, Atlanta, Georgia, USA. Unavailable
Vétel, J., Farinas, M.-I., Garon, A., & Pelletier, D. (2006). Characterization of a Diffuser Flow by Time-Resolved PIV. Journal of Visualization, 9(2), 219-226. External link
Violette, R., Pettigrew, M. J., & Mureithi, N. W. (2006). Fluidelastic instability of an array of tubes preferentially flexible in the flow direction subjected to two-phase cross flow. Journal of Pressure Vessel Technology, 128(1), 148-159. External link
Vu, V. H., Thomas, M., & Lakis, A. A. (2006, October). Operational modal analysis in time domain [Paper]. 24th Seminar on Machinery Vibration (CMVA 2006), Montréal, Québec. External link
Wang, X. (2006). Synthèse topologique et géométrique des manipulateurs parallèles en translation [Ph.D. thesis, École Polytechnique de Montréal]. Available
Wozniak, A., Mayer, J. R. R., Balazinski, M., & Côté, M. (2006, June). Investigation on Prescise Measurement of Cutting Tool Edges Using Coordinate Measuring Machines [Paper]. 2nd International Conference on High Performance Cutting, University of British Columbia, Vancouver, Canada. Unavailable
Yahia, L., Manceur, A., & Chaffraix, P. (2006). Bioperformance of shape memory alloy single crystals. Bio-Medical Materials and Engineering, 16(2), 101-118. External link
Zadeh, E. G., Sawan, M., Jalali, M., & Therriault, D. (2006, August). CMOS-Based capacitive sensor array dedicated to microfluidic studies [Paper]. International Workshop on Computer Architecture for Machine Perception and Sensing (CAMP 2006), Montréal, Québec. External link
Zargarbashi, S. H. H., & Mayer, J. R. R. (2006). Assessment of Machine Tool Trunnion Axis Motion Error, Using Magnetic Double Ball Bar. International Journal of Machine Tools and Manufacture, 46(14), 1823-1834. External link
Zhang, C., Pettigrew, M. J., & Mureithi, N. W. (2006, July). Correlation between vibration excitation forces and the dynamic characteristics of two-phase flow in a rotated triangular tube bundle [Paper]. ASME Pressure Vessels and Piping Conference (PVP 2006) and ICPVT-11 Conference, Vancouver, BC, Canada. External link
Zhang, C., Pettigrew, M. J., & Mureithi, N. W. (2006, November). Quasi-Periodic Vibration Excitation Mechanisms due to Two-Phase in Steam Generator Tube Bundles [Paper]. 5th International Steam Generator Conference, Toronto, Ontario. Unavailable
Zhang, L., Shi, P., Boukas, E.-K., & Wang, C. H. (2006). H-Infinity Control of Switched Linear Discrete-Time Systems With Polytopic Uncertainties. Optimal Control Applications & Methods, 27(5), 273-291. External link
Zhim, F., Laflamme George, Y., Viens, H., Laflamme George, H., & Yahia, L. (2006). Biomechanical stability of a retrotubercle opening-wedge high tibial osteotomy. Journal of Knee Surgery, 19(1), 28-32. External link
Zhou, X., Sankaranarayanane, K., & Rigaud, M. (2006). Influence of aging Time on Rheological Behavior of Bauxite-Based Low-Cement Pumpable Castables. Refractories Applications Transactions, 2(1), 2-8. Unavailable