 | Monter d'un niveau |
Abanto, J., & Reggio, M. (2006). Numerical investigation of the flow in a kitchen hood system. Building and Environment, 41(3), 288-296. Lien externe
Abanto, J., Reggio, M., & Painchaud-Ouellet, S. (2006). On the Design of the RTO Unit Using CFD. Applied Thermal Engineering, 26(17-18), 2327-2335. Lien externe
Alloui, Z., Nguyen, T. H., & Bilgen, E. (2006). Stability analysis of thermo-bioconvection in suspensions of gravitactic microorganisms in a fluid layer. International Communications in Heat and Mass Transfer, 33(10), 1198-1206. Lien externe
Arjmand, N., & Shirazi-Adl, A. (2006). Model and in vivo studies on human trunk load partitioning and stability in isometric forward flexions. Journal of Biomechanics, 39(3), 510-521. Lien externe
Arjmand, N., & Shirazi-Adl, A. (2006). Role of Intra-Abdominal Pressure in the Unloading and Stabilization of the Human Spine During Static Lifting Tasks. European Spine Journal, 15(8), 1265-1275. Lien externe
Arjmand, N., & Shirazi-Adl, A. (2006). Sensitivity of Kinematics-Based Model Predictions to Optimization Criteria in Static Lifting Tasks. Medical Engineering & Physics, 28(6), 504-514. Lien externe
Arjmand, N., Shirazi-Adl, A., & Bazrgari, B. (2006). Wrapping of Trunk Thoracic Extensor Muscles Influences Muscle Forces and Spinal Loads in Lifting Tasks. Clinical Biomechanics, 21(7), 668-675. Lien externe
Bahloul, A., Yahiaoui, M. A., Vasseur, P., Bennacer, R., & Beji, H. (2006). Natural convection of a two-component fluid in porous media bounded by tall concentric vertical cylinders. Transactions of the ASME. Journal of Applied Mechanics, 73(1), 26-33. Lien externe
Bernard, C., Leduc, A., Barbeau, J., Saoudi, B., Yahia, L., & De Crescenzo, G. (2006). Validation of Cold Plasma Treatment for Protein Inactivation: a Surface Plasmon Resonance-Based Biosensor Study. Journal of physics. D, Applied physics, 39(16), 3470-3478. Lien externe
Bernier, M. (2006). Closed-loop ground-coupled heat pump systems. ASHRAE Journal, 48(9), 12-18. Non disponible
Birglen, L., & Gosselin, C. M. (2006). Force Analysis of Connected Differential Mechanisms: Application to Grasping. International Journal of Robotics Research, 25(10), 1033-1046. Lien externe
Birglen, L., & Gosselin, C. M. (2006). Geometric Design of Three-Phalanx Underactuated Fingers. Journal of Mechanical Design, 128(2), 356-364. Lien externe
Birglen, L., & Gosselin, C. M. (2006). Grasp-State Plane Analysis of Two-Phalanx Underactuated Fingers. Mechanism and Machine Theory, 41(7), 807-822. Lien externe
Bolduc, J. E., Lewis, L. J., Aubin, C.-É., & Geitmann, A. (2006). Finite-Element Analysis of Geometrical Factors in Micro-Indentation of Pollen Tubes. Biomechanics and Modeling in Mechanobiology, 5(4), 227-36. Lien externe
Boukas, E.-K. (2006). Discrete-time systems with time-varying time delay: Stability and stabilizability. Mathematical Problems in Engineering, 2006, 42489. Disponible
Boukas, E.-K. (2006). Hᵢₙfᵢₙ stabilization of stochastic hybrid systems with white noise. IMA Journal of Mathematical Control and Information, 23(4), 485-497. Lien externe
Boukas, E.-K. (2006). Manufacturing systems: LMI approach. IEEE Transactions on Automatic Control, 51(6), 1014-1018. Lien externe
Boukas, E.-K. (2006). Output feedback stabilization of stochastic non-linear hybrid systems. IMA Journal of Mathematical Control and Information, 23(2), 137-48. Lien externe
Boukas, E.-K. (2006). Stabilization of Stochastic Hybrid Linear Systems With Noise. Stochastic Analysis and Applications, 24(4), 719-732. Lien externe
Boukas, E.-K. (2006). Stabilization of stochastic singular nonlinear hybrid systems. Nonlinear Analysis-Theory Methods & Applications, 64(2), 217-228. Lien externe
Boukas, E.-K. (2006). Static output feedback control for stochastic hybrid systems: LMI approach. Automatica, 42(1), 183-188. Lien externe
Boukas, E.-K., & Al-Muthairi, N. F. (2006). Delay-dependent stabilization of singular linear systems with delays. International Journal of Innovative Computing Information and Control, 2(2), 283-291. Lien externe
Boukhili, R., Boukehili, H., Ben Daly, H., & Gasmi, A. (2006). Physical and Mechanical Properties of Pultruded Composites Containing Fillers and Low Profile Additives. Polymer Composites, 27(1), 71-81. Lien externe
Boukhili, R., Taib, A. A., Achiou, S., & Boukehili, H. (2006). Bonded joints with composite adherends. Part II. Finite element analysis of joggle lap joints. International Journal of Adhesion and Adhesives, 26(4), 237-248. Lien externe
Boukhili, R., Taib, A. A., Achiou, S., Gordon, S., & Boukehili, H. (2006). Bonded joints with composite adherends. Part I. Effect of specimen configuration, adhesive thickness, spew fillet and adherend stiffness on fracture. International Journal of Adhesion and Adhesives, 26(4), 226-236. Lien externe
Brown, W., Marchand, L., & Derenne, M. (2006). Optimised/harmonised room temperature leakage test procedure for generation of asme & cen code gasket factors - analytical phase. Welding Research Council Bulletin, 508, 84-84. Lien externe
Carrier, M., Farinas, M.-I., & Garon, A. (2006). Hemodynamic Characteristics of a Mixed Flow Pump Prototype: Progress Report of in Vitro and Acute Animal Experiments. Asaio Journal, 52(4), 373-377. Lien externe
Colin, E., Étienne, S., Pelletier, D., & Borggaard, J. (2006). A General Sensitivity Equation Formulation for Turbulent Heat Transfer. Numerical Heat Transfer. Part B, Fundamentals, 49(2), 125-153. Lien externe
Denantes, F., & Bilgen, E. (2006). Counter-Rotating Turbines for Solar Chimney Power Plants. Renewable Energy, 31(12), 1873-1891. Lien externe
Dusseault, J., Tam, S. K., Ménard, M., Polizu, S., Jourdan, G., Yahia, L., & Hallé, J.-P. (2006). Evaluation of Alginate Purification Methods: Effect on Polyphenol, Endotoxin, and Protein Contamination. Journal of Biomedical Materials Research. Part A, 76A(2), 243-251. Lien externe
Duvigneau, R., & Pelletier, D. (2006). On Accurate Boundary Conditions for a Shape Sensitivity Equation Method. International Journal for Numerical Methods in Fluids, 50(2), 147-164. Lien externe
Duvigneau, R., & Pelletier, D. (2006). A Sensitivity Equation Method for Fast Evaluation of Nearby Flows and Uncertainty Analysis for Shape Parameters. International Journal of Computational Fluid Dynamics, 20(7), 497-512. Lien externe
Duvigneau, R., Pelletier, D., & Borggaard, J. (2006). An Improved Continuous Sensitivity Equation Method for Optimal Shape Design in Mixed Convection. Numerical Heat Transfer. Part B, Fundamentals, 50(1), 1-24. Lien externe
Farinas, M.-I., Garon, A., Lacasse, D., & N'Dri, K. D. (2006). Asymptotically consistent numerical approximation of hemolysis. Transactions of the ASME. Journal of Biomechanical Engineering, 128(5), 688-696. Lien externe
Grunhagen, T., Wilde, G., Mokhbi Soukane, D., Shirazi-Adl, A., & Urban, J. P. G. (2006). Nutrient supply and intervertebral disc metabolism. Journal of Bone and Joint Surgery, 88-A, 30-35. Lien externe
Hébert, A. (2006). High order diamond differencing schemes. Annals of Nuclear Energy, 33(17-18), 1479-1488. Lien externe
Hébert, A. (2006). The search for superconvergence in spherical harmonics approximations. Nuclear Science and Engineering, 154(2), 134-173. Lien externe
Hristova, H., Étienne, S., Pelletier, D., & Borggaard, J. (2006). A continuous sensitivity equation method for time-dependent incompressible laminar flows. International Journal for Numerical Methods in Fluids, 50(7), 817-844. Lien externe
Inayat-Hussain, J. I., & Mureithi, N. W. (2006). Transitions to chaos in squeeze-film dampers. Communications in Nonlinear Science and Numerical Simulation, 11(6), 721-744. Lien externe
Kannan, S., Kishawy, H. A., & Balazinski, M. (2006). Flank Wear Progression During Machining Metal Matrix Composites. Journal of Manufacturing Science and Engineering, 128(3), 787-791. Lien externe
Kishawy, H. A., Haglund, A., & Balazinski, M. (2006). Modelling of Material Side Flow in Hard Turning. CIRP Annals - Manufacturing Technology, 55(1), 85-88. Lien externe
Koutchouk, M., Aubin, C.-É., & Gou, M. (2006). Computer modeling of lift trucks and operators to simulate lateral tipover. International Journal of Crashworthiness, 11(5), 485-493. Lien externe
Kummert, M., Adré, P., & Argiriou, A. A. (2006). Comparing control strategies using experimental and simulation results : methodology and application to heating control of passive solar buildings. HVAC&R Research, 12(suppl. 1), 715-737. Lien externe
Lalonde, N. M., Dansereau, J., Pauget, P., Cinquin, P., & Aissaoui, R. (2006). Accessing the influence of repositioning on the pelvis' 3-D orientation in wheelchair users. IEEE Transactions on Neural Systems and Rehabilitation Engineering, 14(1), 76-82. Lien externe
Le Tellier, R., & Hébert, A. (2006). On the integration scheme along a trajectory for the characteristics method. Annals of Nuclear Energy, 33(14-15), 1260-1269. Lien externe
Limodin, N., & Verreman, Y. (2006). Fatigue strength improvement of a 4140 steel by gas nitriding: Influence of notch severity. Materials Science and Engineering. A, Structural Materials Properties Microstructure and Processing, 435-436, 460-7. Lien externe
Liu, H. P., Boukas, E.-K., Sun, F. C., & Ho, D. W. C. (2006). Controller Design for Markov Jumping Systems Subject to Actuator Saturation. Automatica, 42(3), 459-465. Lien externe
Liu, H. P., Sun, F. C., & Boukas, E.-K. (2006). Robust Control of Uncertain Discrete-Time Markovian Jump Systems With Actuator Saturation. International Journal of Control, 79(7), 805-812. Lien externe
Mahidjiba, A., Bennacer, R., & Vasseur, P. (2006). Flows in a Fluid Layer Induced by the Combined Action of a Shear Stress and the Soret Effect. International Journal of Heat and Mass Transfer, 49(7-8), 1403-1411. Lien externe
Mahidjiba, A., Robillard, L., & Vasseur, P. (2006). Onset of penetrative convection of cold water in a porous layer under mixed boundary conditions. International Journal of Heat and Mass Transfer, 49(17-18), 2820-2828. Lien externe
Marduel, X., Tribes, C., & Trépanier, J.-Y. (2006). Variable-fidelity optimization: Efficiency and robustness. Optimization and Engineering, 7(4), 479-500. Lien externe
Martin, E., Manceur, A., Polizu, S., Savadogo, O., Wu, M. H., & Yahia, L. (2006). Corrosion Behaviour of a Beta-Titanium Alloy. Bio-Medical Materials and Engineering, 16(3), 171-182. Lien externe
Mbaye, M., & Bilgen, E. (2006). Natural convection in composite systems with phase change materials. Heat and Mass Transfer, 42(7), 636-644. Lien externe
Mesfar, W., & Shirazi-Adl, A. (2006). Biomechanics of changes in ACL and PCL material properties or prestrains in flexion under muscle force-implications in ligament reconstruction. Computer Methods in Biomechanics and Biomedical Engineering, 9(4), 201-209. Lien externe
Mesfar, W., & Shirazi-Adl, A. (2006). Knee joint mechanics under quadriceps-hamstrings muscle forces are influenced by tibial restraint. Clinical Biomechanics, 21(8), 841-848. Lien externe
N'Dri, K. D., Garon, A., Farinas, M.-I., & Urquiza, J. (2006). Low-order bubble-type stabilization. Communications in Numerical Methods in Engineering, 22(7), 753-765. Lien externe
Najar, E. S., Leduc, A., Zoulgami, M., Barbeau, J., & Yahia, L. (2006). Surface characterization of streptococcus mutans biofilms grown on polyethylene and beta titanium. Journal of Applied Biomaterials & Biomechanics, 4, 120-124. Lien externe
O'Dowd, F., Lévesque, M., & Gilchrist, M. D. (2006). Analysis of fibre orientation effects on injection moulded components. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 220(12), 1909-1921. Lien externe
Ouriemi, M., Vasseur, P., Bahloul, A., & Robillard, L. (2006). Natural Convection in a Horizontal Layer of a Binary Mixture. International Journal of Thermal Sciences, 45(8), 752-759. Lien externe
Oztop, H., & Bilgen, E. (2006). Natural Convection in Differentially Heated and Partially Divided Square Cavities With Internal Heat Generation. International Journal of Heat and Fluid Flow, 27(3), 466-475. Lien externe
Öztürk, İ. T., Karabay, H., & Bilgen, E. (2006). Thermo-Economic Optimization of Hot Water Piping Systems: a Comparison Study. Energy, 31(12), 2094-2107. Lien externe
Painchaud-Ouellet, S., Tribes, C., Trépanier, J.-Y., & Pelletier, D. (2006). Airfoil shape optimization using a nonuniform rational B-splines parameterization under thickness constraint. AIAA Journal, 44(10), 2170-2178. Lien externe
Perron, J., Corbiere, M., Coallier, J. C., & Cloutier, G. (2006). The School-to-Work Transition: a Multitheoretical and Longitudinal Model. Psychologie du travail et des organisations, 12(3), 211-224. Lien externe
Pirker, S., McFarlane, C., & Rigaud, M. (2006). FIRE - the Federation for International Refractory Research and Education. RHI Bulletin: The Journal of Refractory Innovations, 28(1), 43-45. Non disponible
Polizu, S., Savadogo, O., Poulin, P., & Yahia, L. (2006). Applications of Carbon Nanotubes-Based Biomaterials in Biomedical Nanotechnology. Journal of Nanoscience and Nanotechnology, 6(7), 1883-1904. Lien externe
Pomerleau, J., & Sanschagrin, B. (2006). Injection molding shrinkage of PP: experimental progress. Polymer Engineering and Science, 46(9), 1275-1283. Lien externe
Prokoshkin, S. D., Korotitskiy, A. V., Tamonov, A. V., Khmelevskaya, I. Y., Brailovski, V., & Turenne, S. (2006). Comparative X-Ray and Time-of-Flight Neutron Diffraction Studies of Martensite Crystal Lattice in Stressed and Unstressed Binary Ti-Ni Alloys. Materials Science and Engineering: A, 438, 549-552. Lien externe
Prud'homme, M., & Jasmin, S. (2006). Inverse solution for a biochemical heat source in a porous medium in the presence of natural convection. Chemical Engineering Science, 61(5), 1667-1675. Lien externe
Rigaud, M., Balamurugan, K., & Sankaranarayanane, K. (2006). Rheological and thermomechanical behaviour of steel fibre reinforced carbon containing castables. Advances in Science and Technology, 45, 2278-2283. Lien externe
Rigaud, M., Gault, C., Poirier, J., & Pirker, S. (2006). La fédération internationale pour l'éducation et la recherche en réfractaires. Industrie Céramique et Verrière (1006), 63-66. Non disponible
Rigaud, M., Gault, C., Poirier, J., & Pirker, S. (2006). International Federation for Refractory Education and Research: Fire. Silicates Industriels, 71(5-6), 79-80. Non disponible
Riverin, J. L., de Langre, E., & Pettigrew, M. J. (2006). Fluctuating forces caused by internal two-phase flow on bends and tees. Journal of Sound and Vibration, 298(4-5), 1088-1098. Lien externe
Robillard, L., Bahloul, A., & Vasseur, P. (2006). Hydromagnetic natural convection of a binary fluid in a vertical porous enclosure. Chemical Engineering Communications, 193(11), 1431-1444. Lien externe
Rodrigues, L., & Boukas, E.-K. (2006). Piecewise-linear H∞ controller synthesis with applications to inventory control of switched production systems. Automatica, 42(8), 1245-1254. Lien externe
Ruiz, E., & Trochu, F. (2006). Multi-Criteria Thermal Optimization in Liquid Composite Molding to Reduce Processing Stresses and Cycle Time. Composites Part A: Applied Science and Manufacturing, 37(6), 913-924. Lien externe
Ruiz, E., Achim, V., Soukane, S., Trochu, F., & Breard, J. (2006). Optimization of Injection Flow Rate to Minimize Micro/Macro-Voids Formation in Resin Transfer Molded Composites. Composites Science and Technology, 66(3-4), 475-486. Lien externe
Shirazi-Adl, A. (2006). Analysis of large compression loads on lumbar spine in flexion and in torsion using a novel wrapping element. Journal of Biomechanics, 39(2), 267-275. Lien externe
Smith, J., Pirker, S., McFarlane, C., Bittencourt, L., Pandolfelli, V., & Rigaud, M. (2006). FIRE-th Federation for International Refractory Research and Education. Refractories Applications and News, 11(3), 8-11. Non disponible
Soukane, S., & Trochu, F. (2006). Application of the level set method to the simulation of resin transfer molding. Composites Science and Technology, 66(7-8), 1067-1080. Lien externe
Surcel, M.-D., & Gou, M. (2006). Étude par simulation mathématique de l'efficacité d'un dispositif de retenue pour enfant selon la configuration. Assurances et gestion des risques, 73(4), 545-575. Lien externe
Tam, S. K., De Haan, B., Hallé, J. P., Yahia, L., & de Vos, P. (2006). The adsorption of proteins to micro-capsules as an indicator of their biocompatibility. Canadian Journal of Diabetes, 30(3), S1-S1. Non disponible
Tam, S. K., Dusseault, J., Polizu, S., Ménard, M., Hallé, J.-P., & Yahia, L. (2006). Impact of Residual Contamination on the Biofunctional Properties of Purified Alginates Used for Cell Encapsulation. Biomaterials, 27(8), 1296-1305. Lien externe
Tchon, K.-F., Dompierre, J., Vallet, M.-G., Guibault, F., & Camarero, R. (2006). Two-dimensional metric tensor visualization using pseudo-meshes. Engineering with Computers, 22(2), 121-131. Lien externe
Toorani, M. H., & Lakis, A. A. (2006). Free vibrations of non-uniform composite cylindrical shells. Nuclear Engineering and Design, 236(17), 1748-1758. Lien externe
Toorani, M. H., & Lakis, A. A. (2006). Swelling effect on the dynamic behaviour of composite cylindrical shells conveying fluid. International Journal for Numerical Methods in Fluids, 50(4), 397-420. Lien externe
Trochu, F., Ruiz, E., Achim, V., & Soukane, S. (2006). Advanced numerical simulation of liquid composite molding for process analysis and optimization. Composites Part A: Applied Science and Manufacturing, 37(6 SPEC ISS), 890-902. Lien externe
Trudel-Boucher, D., Fisa, B., Denault, J., & Gagnon, P. (2006). Experimental investigation of stamp forming of unconsolidated commingled E-glass/polypropylene fabrics. Composites Science and Technology, 66(3-4), 555-570. Lien externe
Urquiza, J. M., Dri, D. N., Garon, A., & Delfour, M. C. (2006). A Numerical Study of Primal Mixed Finite Element Approximations of Darcy Equations. Communications in Numerical Methods in Engineering, 22(8), 901-915. Lien externe
Vadean, A., Leray, D., & Guillot, J. (2006). Bolted joints for very large bearings - Numerical model development. Finite Elements in Analysis and Design, 42(4), 298-313. Lien externe
Vétel, J., Farinas, M.-I., Garon, A., & Pelletier, D. (2006). Characterization of a Diffuser Flow by Time-Resolved PIV. Journal of Visualization, 9(2), 219-226. Lien externe
Violette, R., Pettigrew, M. J., & Mureithi, N. W. (2006). Fluidelastic instability of an array of tubes preferentially flexible in the flow direction subjected to two-phase cross flow. Journal of Pressure Vessel Technology, 128(1), 148-159. Lien externe
Yahia, L., Manceur, A., & Chaffraix, P. (2006). Bioperformance of shape memory alloy single crystals. Bio-Medical Materials and Engineering, 16(2), 101-118. Lien externe
Zargarbashi, S. H. H., & Mayer, J. R. R. (2006). Assessment of Machine Tool Trunnion Axis Motion Error, Using Magnetic Double Ball Bar. International Journal of Machine Tools and Manufacture, 46(14), 1823-1834. Lien externe
Zhang, L., Shi, P., Boukas, E.-K., & Wang, C. (2006). H-Infinity Control of Switched Linear Discrete-Time Systems With Polytopic Uncertainties. Optimal Control Applications & Methods, 27(5), 273-291. Lien externe
Zhim, F., Laflamme George, Y., Viens, H., Laflamme George, H., & Yahia, L. (2006). Biomechanical stability of a retrotubercle opening-wedge high tibial osteotomy. Journal of Knee Surgery, 19(1), 28-32. Lien externe
Zhou, X., Sankaranarayanane, K., & Rigaud, M. (2006). Influence of aging Time on Rheological Behavior of Bauxite-Based Low-Cement Pumpable Castables. Refractories Applications Transactions, 2(1), 2-8. Non disponible
Eca, L., Hoekstra, M., Hay, A., & Pelletier, D. (2006). Manufactured solutions for one-equation turbulence models in a two-dimensional steady wall-bounded incompressible turbulent flow. (Rapport technique n° EPM-RT-2006-02). Disponible
Esmailzadeh, M., Lakis, A. A., Thomas, M., & Marcouiller, L. (2006). Three-dimensional modeling of curved structures partially or completely containing and/or submerged in fluid. (Rapport technique n° EPM-RT-2006-06). Disponible
Kerboua, Y., Lakis, A. A., Thomas, M., & Marcouiller, L. (2006). Analyse dynamique des systèmes de plaques en interaction avec un fluide et applications. (Rapport technique n° EPM-RT-2006-01). Disponible
Kerboua, Y., Lakis, A. A., Thomas, M., & Marcouiller, L. (2006). Vitesse critique induite par un écoulement potentiel sur un système de plaques. (Rapport technique n° EPM-RT-2006-05). Disponible
Komgom, N. C., Mureithi, N. W., & Lakis, A. A. (2006). Literature review of fault detection using support vector machines or artificial neural networks augmented by genetic aglorithms. (Rapport technique). Non disponible
Kummert, M., & Bernier, M. (2006). Benny Farm-simulation of the hybrid solar-GCHP-boiler system. (Rapport technique). Non disponible
Merlet, S., Thomas, M., Lakis, A. A., & Marcouiller, L. (2006). Conception d'un banc d'essais pour modèles de turbines hydrauliques. (Rapport technique). Non disponible
Achiche, S., Baron, L., & Balazinski, M. (juin 2006). Predictive fuzzy control of paper quality [Communication écrite]. 2004 annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2006), Montréal, Québec. Lien externe
Achiche, S., Przybylo, A., Balazinski, M., & Baron, L. (juin 2006). Predefining numbers of fuzzy sets for genetically generated fuzzy knowledge bases using clustering techniques: Application for tool wear monitoring [Communication écrite]. 2004 annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2006), Montréal, Québec. Lien externe
Achiche, S., Wozniak, A., Balazinski, M., & Baron, L. (juin 2006). Fuzzy rule base influence on genetic-fuzzy reconstruction of CMM 3D triggering probe error characteristic [Communication écrite]. 2004 annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2006), Montréal, Québec. Lien externe
Achim, V., Soukane, S., Gauvin, R., & Trochu, F. (août 2006). Optimization of liquid composite molding based on a mold coefficient concept [Communication écrite]. 6th Canada-Japan Workshop on Composites, Toronto, Canada. Non disponible
Anscutter, F., Béguin, C., Ross, A., Pettigrew, M. J., & Mureithi, N. W. (juillet 2006). Two-phase damping and interface surface area in tubes with internal flow [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2006) and ICPVT-11 Conference, Vancouver, BC, Canada (11 pages). Lien externe
Arjmand, N., & Shirazi-Adl, A. (mars 2006). Role of intra-abdominal pressure in unloading and stabilizing the human spine is task dependent [Communication écrite]. Transactions of the 52nd Orthopedic Research Society, Chicago, Illinois. Non disponible
Arjmand, N., & Shirazi-Adl, A. (juin 2006). Unloading and stabilizing effect of intra-abdominal pressure in lifting is task dependent [Communication écrite]. IEEE International Symposium on Subscriber Loops and Services, Bergen, Norway. Non disponible
Badri, B., Archambault, R., Thomas, M., Sassi, S., & Lakis, A. A. (octobre 2006). La transformée de Julien pour différencier les chocs synchrones des chocs asynchrones [The Julien transform to detect synchronous and asynchronous shock data]. [Communication écrite]. 24th Seminar on Machinery Vibration (CMVA 2006), Montréal, Québec. Lien externe
Bazrgari, B., Shirazi-Adl, A., & Arjmand, N. (juin 2006). Biomechanical analysis of squat and stoop lifts using the kinematics-driven finite element model [Communication écrite]. IEEE International Symposium on Subscriber Loops and Services, Bergen, Norway. Non disponible
Béguin, C., Pettigrew, M. J., & Mureithi, N. W. (novembre 2006). Flow Pattern Recognition and Dynamic Characteristics of Two-Phase Cross Flow in Steam Generator Tube Bundles [Communication écrite]. 5th CNS International Steam Generator Conference, Toronto, Ontario. Non disponible
Bellavigna, O., & Gou, M. (octobre 2006). Acceleration performances testing and simulation of various types of commercial vehicles for railway crossing design [Communication écrite]. Commercial Vehicle Engineering Congress and Exhibition, Chicago, IL, United states. Lien externe
Ben Mehni, A., Mascle, C., & Balazinski, M. (mai 2006). Agility in high speed machining : optimisation between tool and holder [Communication écrite]. 6th International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME 2006), Grenoble. Non disponible
Bernard, C., El Abras, M., Menard, M., Halle, J. P., Yahia, L., & De Crescenzo, G. Characterization of adhesion processes between alginate and PLL for micro encapsulation application [Communication écrite]. 29th Annual Meeting of the Adhesion Society. Non disponible
Bey-Oueslati, R., Palm, S., Therriault, D., & Martel, S. (décembre 2006). High-speed direct-write for rapid fabrication of three-dimensional microfluidic devices [Communication écrite]. 3rd Microfluidics French Conference, Toulouse, France. Non disponible
Bey-Oueslati, R., Therriault, D., & Martel, S. (octobre 2006). Micro heat pipe fabrication : high performance deposition platform for electronic industry [Communication écrite]. 5th International Workshop on Microfactories, Besançon, France. Non disponible
Birglen, L. (septembre 2006). An introduction to the analysis of linkage-driven compliant underactuated fingers [Communication écrite]. ASME International Design Engineering Technical Conferences and Computers and Information In Engineering Conference (DETC 2006), Philadelphia, PA, United States (9 pages). Lien externe
Birglen, L., & Gosselin, C. M. (septembre 2006). Optimally unstable underactuated gripper: Synthesis and applications [Communication écrite]. ASME International Design Engineering Technical Conferences and Computers and Information In Engineering Conference (DETC 2006), Philadelphia, PA, United States. Lien externe
Boucekine, Y., Sanschagrin, B., & Derdouri, A. (mai 2006). Investigation of re-crystallization of injection molded TPO unpainted plaques [Communication écrite]. ANTEC 2006, Charlotte, NC, United States. Lien externe
Boukas, E.-K., & El-Hajjaji, A. (juin 2006). On stabilizability of stochastic fuzzy systems [Communication écrite]. 2006 American Control Conference, Minneapolis, MN, USA. Lien externe
Brown, W., Marchand, L., & LaFrance, T. (juillet 2006). Bolt Anti-Seize Performance in a Process Plant Environment [Communication écrite]. ASME Joint Pressure Vessels and Piping and ICPVT Conference (PVP-ICPVT 2006), Vancouver, BC, Canada. Lien externe
Campbell, M., Bougherara, H. A., Yahia, L., Bureau, M. N., Legoux, J.-G., & Denault, J. (novembre 2006). Biomimetic polymer composites for orthopedic hip implants [Communication écrite]. Materials and Processes for Medical Devices Conference 2005, Boston, MA, United States. Non disponible
Campbell, M., Bureau, M. N., Bougherara, H. A., Denault, J., & Yahia, L. (mai 2006). Biomimetic polymer composites for orthopedic implants [Communication écrite]. ANTEC 2006, Charlotte, NC, United States. Lien externe
Clin, J., Aubin, C.-É., Parent, S., Ronsky, J., & Labelle, H. (juin 2006). Biomechanical modeling of brace design. [Communication écrite]. 6th Biennial Meeting of the International Research Society of Spinal Deformities (IRSSD 2006), Ghent, Belgium. Lien externe
De Langre, E., Riverain, J. L., & Pettigrew, M. J. (juillet 2006). Random Forces Resulting from Internal Two-Phase Flow on Bends and Tees [Communication écrite]. ASME PVP2006/ICPVT-11 Conference, Vancouver, BC, Canada. Lien externe
Desroches, G., Aubin, C.-É., & Rivard, C.-H. (juin 2006). Biomechanical modeling of anterior spone instrumentation in AIS [Communication écrite]. 6th Biennial Meeting of the International Research Society of Spinal Deformities (IRSSD 2006), Ghent, Belgium. Lien externe
Dubé, J. F., Guibault, F., Vallet, M.-G., & Trépanier, J.-Y. (janvier 2006). Turbine Blade Reconstruction and Optimization Using Subdivision Surfaces [Communication écrite]. 44th AIAA Aerospace Sciences Meeting and Exhibit. Lien externe
Eça, L., Hoekstra, M., Hay, A., & Pelletier, D. (juillet 2006). Accomplishments and Challenges in Verification & Validation : On the Construction of Manufactured Solutions for One and Two-Equation Eddy-Viscosity Models [Communication écrite]. 7th World Congress on Computational Mechanics, Los Angeles, California. Non disponible
Eça, L., Hoekstra, M., Hay, A., & Pelletier, D. (octobre 2006). A manufactured solution for two-dimensional steady wall-bounded incompressible turbulent flow [Communication écrite]. 2nd Workshop on CFD Uncertainty Analysis, Lisbon, Portugal. Non disponible
Eça, L., Hoekstra, M., Hay, A., & Pelletier, D. (juillet 2006). A Manufactured Solution for Verification of Turbulent Flow Solvers Using Eddy-Viscosity Models [Communication écrite]. 7th World Congress on Computational Mechanics, Los Angeles, California. Non disponible
Eça, L., Hoekstra, M., Hay, A., & Pelletier, D. (juillet 2006). On the Construction of Manufactured Solutions for one and Two-equation Eddy-viscosity Models [Communication écrite]. 7th World Congress on Computational Mechanics, Los Angeles, California. Non disponible
Edmond, P., Pelletier, D., Étienne, S., & Borggaard, J. (janvier 2006). Application of a sensitivity equation method to compressible subsonic impinging jets [Communication écrite]. 44th AIAA Aerospace Sciences Meeting and Exhibit, Reno, Nevada. Lien externe
El-Rich, M., Aubin, C.-É., Villemure, I., & Labelle, H. (juin 2006). A biomechanical study of L5-S1 low-grade isthmic spondylolisthesis using a personalized finite element model [Communication écrite]. 6th Biennial Meeting of the International Research Society of Spinal Deformities (IRSSD 2006), Ghent, Belgium. Lien externe
Elektorowicz, M., Qasaimeh, A., & Balazinski, M. (avril 2006). Optimisation of the Constructed Wetland Design Using a Fuzzy-Knowledge Approach [Communication écrite]. 35th WEAO Annual Technical Symposium and OPCEA Exhibition, Toronto. Non disponible
Étienne, S., & Pelletier, D. Adaptive Solution of Some Steady-State Fluid-Structure Interactions [Communication écrite]. Computational Fluid Dynamics 2004. Lien externe
Étienne, S., Hay, A., Garon, A., & Pelletier, D. (juin 2006). Shape sensitivity analysis of fluid-structure interaction problems [Communication écrite]. 36th AIAA Fluid Dynamics Conference, San Francisco, CA, United States. Lien externe
Étienne, S., Pelletier, D., & Garon, A. (janvier 2006). A monolithic formulation for unsteady fluid-structure interactions [Communication écrite]. 44th AIAA Aerospace Sciences Meeting and Exhibit, Reno, Nevada. Lien externe
Fauteux, C., Longtin, R., Pegna, J., & Boman, M. (mai 2005). Microstructure Investigation and Heat Treatment of Nanocrystalline Laser-Deposited Carbon Fibers [Communication écrite]. European Materials Research society 2005 - Symposium-J: Advances in Laser and Lamp Processing of Functional Materials (EMRS 2005 Symposium J), Strasbourg, France. Publié dans Applied Surface Science, 252(13). Lien externe
Ghafar-Zadeh, E., Sawan, M., & Therriault, D. (mai 2006). Direct-write CMOS-based Laboratory-On-Chip [Communication écrite]. NSTI Nanotechnology Conference and Trade Show (NSTI Nanotech 2006), Boston, USA. Non disponible
Ghafar-Zadeh, E., Sawan, M., & Therriault, D. (octobre 2006). Microelectrofluidic packaging for CMOS based laboratory-on-chips [Communication écrite]. International Electronics Packaging Symposium, Nyskayuna, N.Y.. Non disponible
Gravelle, A., Ross, A., Pettigrew, M. J., & Mureithi, N. W. (juillet 2006). Damping of Tubes with Internal Two-Phase Flow [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2006) and ICPVT-11 Conference, Vancouver, BC, Canada. Lien externe
Hassane, A., Baron, L., & Boukas, E.-K. (février 2006). Novel open architecture for high speed CNC [Communication écrite]. 92nd Annual Meeting of the Pulp and Paper Technical Association of Canada (PAPTAC 2006). Non disponible
Hay, A., Étienne, S., Duvigneau, R., & Pelletier, D. (janvier 2006). Evaluation of Flows on Nearby Geometries by a Shape Sensitivity Equation Method [Communication écrite]. 44th AIAA Aerospace Sciences Meeting and Exhibit, Reno, Nevada. Lien externe
Hébert, A. (septembre 2006). Towards Version4 [Communication écrite]. Physics of Reactors Conference: Advances in Nuclear Analysis and Simulation (PHYSOR 2006), Vancouver, BC. Non disponible
Hristova, H., Étienne, S., Pelletier, D., & Borggaard, J. Sensitivity Analysis of Transient Incompressible Laminar Flows [Communication écrite]. Computational Fluid Dynamics 2004. Lien externe
Hubert, P., Haider, M., Lessard, L., Ruiz, E., & Trochu, F. (mars 2006). Integrated Approach for Class A Surface Finish of Automotive Components Manufactured by RTM [Communication écrite]. 27th International SAMPE Europe Conference, Paris, France. Non disponible
Ilinca, F., Hay, A., & Pelletier, D. (juin 2006). Shape Sensitivity Analysis of unsteady Laminar flow Past a Cylinder in Ground Proximity [Communication écrite]. 3rd AIAA Flow Control Conference, San Francisco, California. Lien externe
Iolova, K., Bernier, M., & Nichols, L. (mai 2006). Quantifying the energy impact of a variable flow pump in a ground-coupled heat pump system [Communication écrite]. Conference eSim 2006 : IBPSA-Canada's 4. biennial building performance simulation conference, Toronto, Canada. Lien externe
Jolly, P., & Marchand, L. (juillet 2006). Leakage predictions for static gasket based on the porous media theory [Communication écrite]. ASME PVP2006/ICPVT-11 Conference, Vancouver, BC, Canada. Lien externe
Kannan, S., Kishawy, H. A., & Balazinski, M. (octobre 2006). Analysis of abrasive wear during machining metal matrix composites [Communication écrite]. Aerospace Materials and manufacturing Process: Emerging Materials, Manufacturing and Repair Techniques, Montréal, Québec. Non disponible
Karthikeyan, R., Le Tellier, R., & Hébert, A. (septembre 2006). Estimation of coolant void reactivity for ACR-type lattices using DRAGON and validation using MCNP5 and TRIPOLI-4.3 [Communication écrite]. Physics of Reactors Conference: Advances in Nuclear Analysis and Simulation (PHYSOR 2006), Vancouver, BC. Non disponible
Kerboua, Y., Lakis, A. A., Thomas, M., Marcouiller, L., & Toorani, M. H. (novembre 2006). Dynamic analysis of coupled fluid-structure systems [Communication écrite]. 2nd WSEAS International Conference on Applied and Theoretical Mechanics (MECHANICS 2006), Venice, Italy. Lien externe
Khoukhi, A., Baron, L., & Balazinski, M. A Decoupled Approach to Optimal Time Energy Trajectory Planning of Parallel Kinematic Machines [Communication écrite]. Robot Design, Dynamics, and Control (Romansy 2006). Lien externe
Khoukhi, A., Baron, L., Balazinski, M., & Demirli, K. (juin 2006). Fuzzy-Neuro Optimal Time-Energy Control of a Three Degrees of Freedom Planar Manipulator [Communication écrite]. Annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2006), Montréal, Québec. Lien externe
Kuhn, M., Napporn, T., Meunier, M., Therriault, D., & Vengallatore, S. (novembre 2006). Direct-Write Microfabrication of Single-Chamber Solid Oxide Fuel Cells with Interdigitated Electrodes [Communication écrite]. MRS Fall Meeting, Boston, Ma.. Lien externe
Kuhn, M., Napporn, T., Meunier, M., Vengallatore, S., & Therriault, D. (mai 2006). Microfabrication de piles SOFC à chambre unique par écriture directe [Communication écrite]. 74e Congrès de l'ACFAS, Montréal, Québec. Non disponible
Kummert, M., & Bernier, M. (décembre 2006). Sub-hourly simulation of residential ground coupled heat pump systems [Communication écrite]. 7th International Conference on System Simulation in Buildings, Liège, Belgium. Non disponible
Kummert, M., Bernier, M., & Roy, M. (mai 2006). Using simulation to validate and optimize the design of a hybrid solar-GCHP system [Communication écrite]. Conference eSim 2006 : IBPSA-Canada's 4 : biennial building performance simulation conference, Toronto, Canada. Lien externe
Laurier Chapleau, S., Martin, É., & Baron, L. (juin 2006). Results and Verification of Spacecraft Docking Emulation using Hardware-in-the-Loop Simulation [Communication écrite]. 16th Symposium on Theory and Practice of Robots and Manipulators (ROMANSY 2016), Warsaw, Poland. Lien externe
Le Tellier, R., Hébert, A., & Marleau, G. (septembre 2006). The Implementation of a 3-D Characteristics Solver for the Generation of Incremental Cross Section for Reactivity Devices in a CANDU Reactor [Communication écrite]. Advances in Nuclear Analysis and Simulation (PHYSOR 2006), Vancouver, Canada. Non disponible
Le Tellier, R., Hébert, A., Santamarina, A., & Litaize, O. (septembre 2006). Benchmarking of the characteristics method combined with advanced self-shielding models on BWR-MOX assemblies [Communication écrite]. Physics of Reactors Conference: Advances in Nuclear Analysis and Simulation (PHYSOR 2006), Vancouver, BC. Non disponible
Limodin, N., & Verreman, Y. (mai 2006). Fatigue strength improvement of 4140 steel by gas nitriding [Communication écrite]. 9th International Fatigue Congress, Atlanta, Georgia, USA. Non disponible
Majdouline, Y., Aubin, C.-É., & Labelle, H. (juin 2006). Objectives for correction and related instrumentation strategies in scoliosis surgery for Lenke curve types 2, 3 and 5. [Communication écrite]. 6th Biennial Meeting of the International Research Society of Spinal Deformities (IRSSD 2006), Ghent, Belgium. Lien externe
Martin, A., Trépanier, J.-Y., Reggio, M., & Guo, X. (septembre 2006). Transient ablation regime in circuit-breakers [Communication écrite]. 16th International Conference on Gas Discharges, Xi'an, People's Republic of China. Non disponible
Mascle, C. (juin 2006). Life-cycle features for mechanical products analysis and simulations [Communication écrite]. 4th Annual International Industrial Simulation Conference, Palermo, Italy. Non disponible
Mascle, C., & Sy, M. (juillet 2006). A data base for the representation of life-cycle features in mechanical products [Communication écrite]. 16th CIRP International Design Conference, Kananaskis, Canada. Non disponible
Mokhbi Soukane, D., Shirazi-Adl, A., & Urban, J. P. G. (mars 2006). Nonlinear coupled diffusion of glucose, oxygen and lactic acid in the human intervertebral disc [Communication écrite]. Transactions of the 52nd Orthopedic Research Society, Chicago, Illinois. Non disponible
Mokhbi-Soukane, D., Shirazi-Adl, A., & Urban, J. P. G. (juin 2006). Coupled diffusion of nutrients in the human disc [Communication écrite]. IEEE International Symposium on Subscriber Loops and Services, Bergen, Norway. Non disponible
Mokhtarzadeh, H., Farahmand, F., Parnianpour, M., Malekipour, F., Shirazi-Adl, A., & Arjmand, N. (janvier 2006). Mathematical and finite element modeling of spine to investigate the effects of intra-abdominal pressure and activation of muscles around abdomin on the spinal stability [Communication écrite]. 8th Biennial ASME Conference on Engineering Systems Design and Analysis, Torino, Italy. Lien externe
Mureithi, N. W., Shahriary, S., & Pettigrew, M. J. (novembre 2006). Fluidelastic Instability Forces in a Triangular Tube Bundle Subjected to Two-Phase Cross Flow [Communication écrite]. 5th International Steam Generator Conference, Toronto, Ontario. Non disponible
Ouahabi, A., Thomas, M., & Lakis, A. A. (octobre 2006). Détection de fissures de respiration de fatigue par excitation harmonique et analyse temps-fréquence [Communication écrite]. 24th Seminar on Machinery Vibration (CMVA 2006), Montréal, Québec. Lien externe
Ouahabi, A., Thomas, M., & Lakis, A. A. (juillet 2006). Detection of damages in beams and composite plates by harmonic excitation and time-frequency analysis [Communication écrite]. 3rd European Workshop on Structural Health Monitoring, Granada, Spain. Non disponible
Palm, S., Bey-Oueslati, R., Martel, S., & Therriault, D. (décembre 2006). Fabrication de microcaloducs à section triangulaire par écriture directe [Communication écrite]. 3rd Microfluidics French Conference (Microfluidics 2006), Toulouse, France. Non disponible
Pelletier, D. (juillet 2006). Manufactured Solutions and Verification of Adaptive codes and simulations, Mini-symposium on Verification & Validation [Communication écrite]. 7th World Congress on Computational Mechanics, Los Angeles, California. Non disponible
Petro, E., Reggio, M., & Abanto, J. (octobre 2006). Airflow prediction and fire and smoke propagation in large enclosed structures [Communication écrite]. International Technical Congress on Computational Simulation Models in fire Engineering and Research, Santander, Spain. Non disponible
Pettigrew, M. J., Violette, R., & Mureithi, N. W. (novembre 2006). Fluidelastic Instability of a Tube Bundle Preferentially Flexible in the Flow Direction to Simulate U-Bend In-Plane Vibration [Communication écrite]. 5th International Steam Generator Conference, Toronto, Ontario. Non disponible
Picard, D., Delisle, V., Bernier, M., & Kummert, M. (août 2006). On the Combined Effect of Wastewater Heat Recovery and Solar Domestic Hot Water Heating [Communication écrite]. Canadian Solar Buildings Conference, Montréal, Québec. Non disponible
Plourde, F., Cheriet, F., & Dansereau, J. (juin 2006). Semi-automatic detection of scoliotic rib borders using chest radiographs. [Communication écrite]. 6th Biennial Meeting of the International Research Society of Spinal Deformities, Ghent, Belgium. Lien externe
Polizu, S., Maugey, M., Poulin, S., Poulin, P., & Yahia, L. (octobre 2005). Nanoscale surface of carbon nanotube fibers for medical applications: Structure and chemistry revealed by TOF-SIMS analysis [Communication écrite]. 15th International Conference on Secondary Ion Mass Spectrometry (SIMS 2005), Manchester, UK. Publié dans Applied Surface Science, 252(19). Lien externe
Poueymirou-Bouchet, D., Tribes, C., & Trépanier, J.-Y. A Nurbs-Based Shape Optimization Method for Hydraulic Turbine Stay Vane [Communication écrite]. Computational Fluid Dynamics. Lien externe
Poulin, S., Durrieu, M. C., Polizu, S., & Yahia, L. (octobre 2005). Bioactive molecules for biomimetic materials: Identification of RGD peptide sequences by TOF-S-SIMS analysis [Communication écrite]. International Conference on Secondary Ion Mass Spectrometry (SIMS 2005), Manchester, UK. Publié dans Applied Surface Science, 252(19). Lien externe
Pouponneau, P., Yahia, L., Merhi, Y., Epure, L. M., & Martel, S. (août 2006). Biocompatibility of candidate materials for the realization of medical microdevices [Communication écrite]. 28th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC 2006), New York, NY, USA. Lien externe
Prud'homme, M., & Jasmin, S. (août 2006). Inverse determination of biochemical model parameters in porous medium convection with biochemical heating [Communication écrite]. International Heat Transfer Conference IHTC 13, Sydney, Australia. Lien externe
Puente, L. R., Reggio, M., & Guibault, F. (octobre 2006). Optimizing the shape of a hydraulic turbine draft tube [Optimizacion de la forma de un tubo aspirador una turbina hidraulica]. [Communication écrite]. 22nd Latin America International Symposium on Hydraulic Structures, Ciudad Guayana, Venezuela. Non disponible
Raouf, J., & Boukas, E.-K. (juin 2006). Observer-based controller design of Markovian jump bilinear descriptor systems [Communication écrite]. 2006 American Control Conference, Minneapolis, MN, USA. Lien externe
Ren, Q., Baron, L., & Balazinski, M. (juin 2006). Type-2 Takagi-Sugeno-Kang Fuzzy Logic Modeling using Subtractive Clustering [Communication écrite]. Annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2006), Montréal, Québec. Lien externe
Robitaille, M., Aubin, C.-É., & Labelle, H. (juin 2006). Biomechanical assessment of variable instrumentation strategies in adolescent idiopathic scoliosis: preliminary analysis of 3 patients and 6 scenarios. [Communication écrite]. 6th Biennial Meeting of the International Research Society of Spinal Deformities (IRSSD 2006), Ghent, Belgium. Lien externe
Rodriguez, M., & Mureithi, N. W. (juillet 2006). Cylinder wake dynamics in the presence of stream-wise harmonic forcing [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2006) and ICPVT-11 Conference, Vancouver, BC, Canada. Lien externe
Ruiz, E., Achim, V., Breard, J., Chatel, S., & Trochu, F. (juillet 2006). A fast numerical approach to reduce void formation in liquid composite molding [Communication écrite]. 8th International Conference on Flow Processes in Composite Materials, Mines de Douai, France. Lien externe
Ruiz, E., Chatel, S., & Trochu, F. (juillet 2006). A Simplified Numerical Approach to Simulate Resin Transfer Molding with a Dispersion Medium [Communication écrite]. 8th International Conference on Flow Processes in Composite Materials, Mines de Douai, France. Lien externe
Ruiz, E., Waffo, F., Owens, J., Billotte, C., & Trochu, F. (juillet 2006). Modeling of Resin Cure Kinetics for mOlding Cycle Optimization [Communication écrite]. 8th International Conference on Flow Processes in Composite Materials, Mines de Douai, France. Lien externe
Shirazi-Adl, A., & Mesfar, W. (mars 2006). Tibial restraint influences cruciate ligament forces in the knee joint under extensor/flexor moments [Communication écrite]. Transactions of the 52nd Orthopedic Research Society, Chicago, Illinois. Non disponible
Sim, W. G., Bae, B. M., Mureithi, N. W., & Pettigrew, M. J. (juillet 2006). Characteristics of Two-Phase Flows in Vertical Pipes [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2006) and ICPVT-11 Conference, Vancouver, BC, Canada. Lien externe
Slamani, M., Mayer, J. R. R., Balazinski, M., & Engin, S. (juin 2006). Characterization of Machine Tools for Boring by Highspeed Orbital Milling [Communication écrite]. 2nd International Conference on High Performance Cutting, University of British Columbia, Vancouver, Canada. Non disponible
Sy, M., & Mascle, C. (mai 2006). Life cycle design and manufacturing approaches [Communication écrite]. 6th International Conference on Integrated Design and Manufacturing in Mechanical Engineering, Grenoble, France. Non disponible
Tam, S. K., Hallé, J. P., Yahia, L., & de Vos, P. (octobre 2006). The adsorption of immunoglobulin on alginate-based microcapsules [Communication écrite]. XIVth International Workshop on Bioencapsulation, Lausanne, Switzerland. Lien externe
Tchon, K. F., & Camarero, R. Quad-Dominant Mesh Adaptation Using Specialized Simplicial Optimization [Communication écrite]. 15th International Meshing Roundtable. Lien externe
Toorani, M. H., & Lakis, A. A. (juin 2006). Coupled fluid-structure interaction in composite cylindrical shells conveying axial flow [Communication écrite]. 3rd European Conference on Computational Mechanics, Solids, Structures and Coupled Problems in Engineering, Lisbon, Portugal. Non disponible
Tremblay, D., Étienne, S., & Pelletier, D. (juin 2006). Code verification and the method of manufactured solutions for fluid-structure interaction problems [Communication écrite]. 36th AIAA Fluid Dynamics Conference, San Francisco, CA, United States. Lien externe
Tribes, C., & Trépanier, J.-Y. (septembre 2006). Distributed optimizations using optimal solution sensitivity [Communication écrite]. 11th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Portsmouth, VA, United States. Lien externe
Vasilevskiy, D., Roy, F., Renaud, E., Masut, R. A., & Turenne, S. (août 2006). Mechanical Properties of the Interface Between Nickel Contact and Extruded (Bi₁₋ₓSbₓ)₂(Te₁₋ySey)₃ [Communication écrite]. 25th International Conference on Thermoelectrics, Vienne, Autriche. Lien externe
Verreman, Y., & Limodin, N. (mai 2006). Fatigue life prediction of V-notched components [Communication écrite]. 9th International Fatigue Congress, Atlanta, Georgia, USA. Non disponible
Vu, V. H., Thomas, M., & Lakis, A. A. (octobre 2006). Operational modal analysis in time domain [Communication écrite]. 24th Seminar on Machinery Vibration (CMVA 2006), Montréal, Québec. Lien externe
Wozniak, A., Mayer, J. R. R., Balazinski, M., & Côté, M. (juin 2006). Investigation on Prescise Measurement of Cutting Tool Edges Using Coordinate Measuring Machines [Communication écrite]. 2nd International Conference on High Performance Cutting, University of British Columbia, Vancouver, Canada. Non disponible
Zadeh, E. G., Sawan, M., Jalali, M., & Therriault, D. (août 2006). CMOS-Based capacitive sensor array dedicated to microfluidic studies [Communication écrite]. International Workshop on Computer Architecture for Machine Perception and Sensing (CAMP 2006), Montréal, Québec. Lien externe
Zhang, C., Pettigrew, M. J., & Mureithi, N. W. (juillet 2006). Correlation between vibration excitation forces and the dynamic characteristics of two-phase flow in a rotated triangular tube bundle [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2006) and ICPVT-11 Conference, Vancouver, BC, Canada. Lien externe
Zhang, C., Pettigrew, M. J., & Mureithi, N. W. (novembre 2006). Quasi-Periodic Vibration Excitation Mechanisms due to Two-Phase in Steam Generator Tube Bundles [Communication écrite]. 5th International Steam Generator Conference, Toronto, Ontario. Non disponible
Barello, R. B., & Lévesque, M. (décembre 2006). Modélisation de la décohésion interface renfort-matrice dans un matériau composite [Affiche]. 2e colloque annuel du CREPEC, Montréal, Québec. Non disponible
Arjmand, N., Shirazi-Adl, A., & Bazrgari, B. (juillet 2006). Influence of curved lines of action for trunk extensor muscles on load redistribution and stability of the spine during lifting [Résumé]. 5th World Congress of Biomechanics, Munich, Germany. Publié dans Journal of Biomechanics, 39. Lien externe
Bazrgari, B., Shirazi-Adl, A., & Arjmand, N. (juillet 2006). Load distribution between active-passive systems in squat and stoop dynamic lifts [Résumé]. 5th World Congress of Biomechanics, Munich, Germany. Publié dans Journal of Biomechanics, 39. Lien externe
Mesfar, W., & Shirazi-Adl, A. (juillet 2006). Role of tibial constraint on knee joint biomechanics under muscle loads [Résumé]. 5th World Congress of Biomechanics, Munich, Germany. Publié dans Journal of Biomechanics, 39. Lien externe
Allard, E. (2006). Analyse expérimentale et optimisation d'un procédé d'injection flexible pour la fabrication rapide des composites [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Ben Amor, Z. (2006). Méthode prédictive de densités de palpage en métrologie [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Bolduc, J.-F. (2006). Effet de l'écrouissage sur la propagation d'une fissure à partir d'un trou chargé dans des alliages d'aluminium 2024-T351 et 7474-T7351 [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Boucekine, Y. (2006). Étude de la stabilité dimensionnelle du TPO lors du traitement de surface pour l'application d'un revêtement [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Bourgeois, J. (2006). Le krigeage comme méthode d'approximation pour l'optimisation [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Drouin, P. (2006). Simulation d'un procédé de mise en forme par grenaillage aux ultrasons avec billes [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Galo, C. R. (2006). Machining strategies of an inconel 718 shaft [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Hosseiny, M. (2006). Comparaison des outils Guhring et Iscar dans le perçage de composites à matrice d'aluminium [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Jerbi, L. (2006). Mise en valeur d'une nouvelle technique de caractérisation de la résistance à l'endommagement des réfractaires soumis à des conditions de variation de température [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Laurier Chapleau, S. (2006). Vérification du banc d'essai d'émulation d'amarrage de satellites de l'agence spatiale canadienne [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Mahvash Mohammadi, A. (2006). Two-phase flow pattern identification using hidden Markov model [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Margarit, L. (2006). Étude expérimentale du perçage des composites à matrice d'aluminium renforcée de particules de céramique et de graphite revêtu de nickel [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Paquet, D. (2006). Modélisation des contraintes résiduelles thermiques et étude de leur effet sur la vie en fatigue de l'acier inoxydable austénitique 304L [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Rakoto Ramambason, D. S. (2006). Effet d'un champ magnétique sur la convection naturelle d'un fluide binaire en milieu poreux confiné [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Rémillard, V. (2006). Systèmes non linéaires : une approche par la logique floue appliquée à la plate-forme de Gough-Stewart [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Ren, Q. (2006). Type-2 Takagi-Sugeno-Kang fuzzy logic modeling using subtractive clustering [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Robitaille, M. (2006). Analyse biomécanique de stratégies d'instrumentation chirurgicale du rachis scoliotique [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Rodriguez, M. (2006). Simulation et analyse numériques de la dynamique de la trainée en aval d'un cylindre soumis à des oscillations forcées [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Saberian, J.-R. (2006). Mesure des écarts cinématiques articulaires d'un axe de rotation [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Alloui, Z. (2006). Analyse et simulation de la bioconvection en milieu fluide [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Arjmand, N. (2006). Computational biomechanics of the human spine in static lifting tasks [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Goduguchinta, R. K. (2006). Axial convection enhanced laser CVD of carbon rods [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Jasmin, S. (2006). Détermination de sources de chaleur et de taux de croissance biochimiques avec convection naturelle en milieu poreux à l'aide d'une méthode inverse [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Jiang, H. (2006). Optimal control of induction heating for semi-solid alloy forming [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Kerboua, Y. (2006). Modélisation des systèmes de plaques en interaction avec un fluide au repos ou en écoulement [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Nguyen-Quang, T. (2006). Etude de la bioconvection gravitactique en milieux poreux [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Wang, X. (2006). Synthèse topologique et géométrique des manipulateurs parallèles en translation [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Pegna, J., & Zhu, J. (2006). Quantization effects in shallow powder bed vibrations. Dans Guran, A., Smirnov, A. L., Steigmann, D. J., & Vaillancourt, R. (édit.), Advances in mechanics of solids (Vol. 15, p. 229-257). Lien externe
Pelletier, D., & Roache, P. J. (2006). Verification and Validation of Computational Heat Transfer. Dans Handbook of Numerical Heat Transfer (2e éd., p. 417-442). Lien externe
Stokes, I. A. F., & Aubin, C.-É. (2006). Biomechanics of scoliosis. Dans Encyclopedia of Medial Devices and Instrumentation (p. 122-137). Lien externe
