 | Monter d'un niveau |
Abdali, H., & Ajji, A. (2015). Development of antibacterial structures and films using clove bud powder. Industrial Crops and Products, 72, 214-219. Lien externe
Addison, W. N., Nelea, V., Chicatun, F., Chien, Y. C., Tran-Khanh, N., Buschmann, M. D., Nazhat, S. N., Kaartinen, M. T., Vali, H., Tecklenburg, M. M., Franceschi, R. T., & McKee, M. D. (2015). Extracellular matrix mineralization in murine MOT3-E1 osteoblast cultures: An ultrastructural, compositional and comparative analysis with mouse bone. Bone, 71, 244-256. Lien externe
Aghabararnejad, M., Patience, G. S., & Chaouki, J. (2015). Techno-Economic Comparison of a 7-MWₜₕ Biomass Chemical Looping Gasification Unit with Conventional Systems. Chemical Engineering and Technology, 38(5), 867-878. Lien externe
Aghabararnejad, M., Patience, G. S., & Chaouki, J. (2015). Transient modeling of biomass steam gasification with Co₃O₄. Fuel, 140, 354-364. Lien externe
Ajao, O., Le Hir, M., Rahni, M., Marinova, M., Chadjaa, H., & Savadogo, O. (2015). Concentration and Detoxification of Kraft Prehydrolysate by Combining Nanofiltration with Flocculation. Industrial & Engineering Chemistry Research, 54(3), 1113-1122. Lien externe
Ajao, O., Rahni, M., Marinova, M., Chadjaa, H., & Savadogo, O. (2015). Retention and flux characteristics of nanofiltration membranes during hemicellulose prehydrolysate concentration. Chemical Engineering Journal, 260, 605-615. Lien externe
Ajersch, F., Ilinca, F., & Goodwin, F. E. (mai 2015). Experimental Study of Skimmings Generation in Galvanizing Baths With Variable Al and Mg Compositions [Communication écrite]. 10th International Conference on Zinc and Zinc Alloy Coated Steel Sheet (Galvatech 2015), Toronto, ON, Canada. Non disponible
Ammara, R. (2015). Systematic Equipment Performance Analysis of a Kraft Process Through New and Adapted Key Performance Indicators [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Antoniou, J., Wang, H. T., Hadjab, I., Aldebeyan, S., Alaqeel, M. A., Meij, B. P., Tryfonidou, M. A., & Mwale, F. (2015). The Effects of Naproxen on Chondrogenesis of Human Mesenchymal Stem Cells. Tissue Engineering - Part A, 21(13-14), 2136-2146. Lien externe
Arias, A., Heuzey, M.-C., Huneault, M. A., Ausias, G., & Bendahou, A. (2015). Enhanced dispersion of cellulose nanocrystals in melt-processed polylactide-based nanocomposites. Cellulose, 22(1), 483-498. Lien externe
Arnold, E. (2015). Surexpression de la glucose-6-phosphate déshydrogénase pour l'étude du métabolisme primaire de cellules de mammifères en mode cuvée [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Asiedu-Boateng, P. (2015). Attrition Resistance of CaO-CuO-Cem Powder for CO2 Capture in Calcium Looping Processes [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Audet, E., Mighri, F., Rodrigue, D., & Ajji, A. (2015). Effect of Biaxial Stretching Temperature and Gas Diffusion Expansion on Cellular Morphology of PP/CaCO₃ and PP/talc Cellular Films. Cellular Polymers, 34(5), 233-248. Lien externe
Bagheriasl, D., Carreau, P., Dubois, C., & Riedl, B. (juin 2014). Effect of cellulose nanocrystals (CNCs) on crystallinity, mechanical and rheological properties of polypropylene/CNCs nanocomposites [Communication écrite]. 30th International Conference of the Polymer Processing Society (PPS-30), Cleveland, Ohio, USA (5 pages). Lien externe
Bagheriasl, D., Carreau, P., Dubois, C., & Riedl, B. (2015). Properties of polypropylene and polypropylene/poly(ethylene-co-vinyl alcohol) blend/CNC nanocomposites. Composites Science and Technology, 117, 357-363. Lien externe
Bashiri, H. (2015). Numerical and Experimental Investigation of Liquid and Gas/Liquid Flows in Stirred Tank Reactors [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Bashiri, H., Bertrand, F., & Chaouki, J. (juin 2015). Development of a Multiscale Model for the Design and Scale-up of Gas-Liquid Stirred Tank Reactors [Communication écrite]. 2nd International Conference on Multiscale Computational Methods for Solids and Fluids (ECCOMAS MSF 2015), Sarajevo, Boznia and Herzegovina. Non disponible
Beaulieu, C., Bonniol, F., Chaouki, J., & Bertrand, F. (septembre 2015). Use of Collision and Flow Properties of Particles Falling From a Hopper to Estimate the Damping Coefficient in the DEM [Communication écrite]. 4th Conference on Particle-Based Methods (PARTICLES 2015), Barcelona, Spain. Lien externe
Behrang, A., Grmela, M., Dubois, C., Turenne, S., & Lafleur, P. (2015). Temperature dependence of thermal conductivity in hybrid nanodispersions. RSC Advances, 5(4), 2768-2776. Lien externe
Bélisle, E., Huang, Z., & Gheribi, A. E. (juin 2015). Truth Discovery in Material Science Databases [Communication écrite]. 26th Australasian Database Conference (ADC 2015), Melbourne, Australia. Lien externe
Benhaddadi, M., Mammou, A., Dufresne, V., & Samson, R. (mai 2015). Energy Efficiency as a Powerful Tool Against Climate Change [Communication écrite]. International Conference on Computer Science and Environmental Engineering (CSEE 2015), Beijing, China. Non disponible
Bérad, A., Patience, G. S., & Tavares, J. R. (octobre 2015). Superhydrophobic exclusion net for apple grower application [Communication écrite]. Canadian Chemical Engineering Conference, Calgary, Alberta. Non disponible
Berezhetska, O., Liberelle, B., De Crescenzo, G., & Cicoira, F. (2015). A simple approach for protein covalent grafting on conducting polymer films. Journal of Materials Chemistry B, 3(25), 5087-5094. Lien externe
Bertrand, F., Blais, B., Lassaigne, M., Fradette, L., & Goniva, C. (novembre 2015). A CFD-DEM Model for Viscous Solid-Liquid Mixing in Stirred Tanks [Communication écrite]. AIChE Annual Meeting, Salt Lake City, Utah. Lien externe
Bintou, O., & Savadogo, O. (2015). Electrophoretic Deposition and Physicochemical Characterization of Al₂O₃-NiO Composite Materials. Journal of New Materials for Electrochemical Systems, 18(1), 49-62. Lien externe
Blais, B., & Bertrand, F. (2015). On the use of the method of manufactured solutions for the verification of CFD codes for the volume-averaged Navier–Stokes equations. Computer & Fluids, 114, 121-129. Disponible
Blais, B., & Bertrand, F. (mai 2015). Strategies for the CFD-DEM Simulation of Dense Suspensions in Stirred Tanks [Communication écrite]. 27th International Conference on Parallel Computational Fluid Dynamics (Parallel CFD 2015), Montréal, Québec. Non disponible
Blais, B., Lassaigne, M., Goniva, C., Fradette, L., & Bertrand, F. (septembre 2015). Design and Validation of a Robust CFD-DEM Model for the Investigation of Viscous Solid-Liquid Mixing in Agitated Vessels [Communication écrite]. 4th Conference on Particle-Based Methods (PARTICLES 2015), Barcelona, Spain. Lien externe
Blais, B., Lassaigne, M., Goniva, C., Fradette, L., & Bertrand, F. (juin 2015). Investigation of Viscous Solid-Liquid Mixing in Agitated Vessels Using CFD-DEM: Model Formulation and Experimental Validation [Communication écrite]. 10th OpenFOAM Workshop, Ann Arbor, Michigan. Non disponible
Blais, B., Lassaigne, M., Goniva, C., Fradette, L., & Bertrand, F. (septembre 2015). A Robust and Efficient CFD-DEM Model for the Investigation of Viscous Solid-Liquid Mixing in Stirred Tanks [Communication écrite]. 10th European Congress on Chemical Engineering (ECCE 2015), Nice, France. Non disponible
Blais, B., Tucny, J.-M., Vidal, D., & Bertrand, F. (2015). A conservative lattice Boltzmann model for the volume-averaged Navier–Stokes equations based on a novel collision operator. Journal of Computational Physics, 294, 258-273. Disponible
Boffito, D. C., Blanco Manrique, G., & Patience, G. S. (2015). One step cracking/transesterification of vegetable oil: Reaction-regeneration cycles in a capillary fluidized bed. Energy Conversion and Management, 103, 958-964. Lien externe
Boffito, D. C., Galli, F., Martinez, P. R., Pirola, C., Bianchi, C. L., & Patience, G. S. (mai 2015). Transesterification of triglycerides in a new ultrasonic-assisted mixing device [Communication écrite]. 12th International Conference on Chemical & Process Engineering (ICheaP12), Milan, Italy. Publié dans Chemical Engineering Transactions, 43. Lien externe
Boffito, D. C., Leveque, J. M., Pirola, C., Bianchi, C. L., Vibert, R., Perrier, A., & Patience, G. S. (2015). Batch and Continuous Ultrasonic Reactors for the Production of Methyl Esters from Vegetable Oils. Dans Production of Biofuels and Chemicals with Ultrasound (Vol. 4, p. 87-114). Lien externe
Boffito, D. C., Martinez-Guerra, E., Gude, V. G., & Patience, G. S. (2015). Conversion of Refined and Waste Oils by Ultrasound-assisted Heterogeneous Catalysis. Dans Ashokkumar, M. (édit.), Handbook of Ultrasonics and Sonochemistry (33 pages). Lien externe
Bonhivers, J.-C., Svensson, E., Sorin, M. V., Berntsson, T. S., & Stuart, P. R. (2015). Energy transfer diagram for site-wide analysis and application to a kraft pulp mill. Applied Thermal Engineering, 75, 547-560. Lien externe
Boulay, A.-M. (2015). L'empreinte eau. Dans L'eau à découvert (p. 266-267). Lien externe
Boulay, A.-M., Bare, J., De Camillis, C., Döll, P., Gassert, F., Gerten, D., Humbert, S., Inaba, A., Itsubo, N., Lemoine, Y., Margni, M., Motoshita, M., Núñez, M., Pastor, A. V., Ridoutt, B., Schencker, U., Shirakawa, N., Vionnet, S., Worbe, S., ... Pfister, S. (2015). Consensus building on the development of a stress-based indicator for LCA-based impact assessment of water consumption: outcome of the expert workshops. International Journal of Life Cycle Assessment, 20(5), 577-583. Lien externe
Boulay, A.-M., Bayart, J.-B., Bulle, C., Franceschini, H., Motoshita, M., Muñoz, I., Pfister, S., & Margni, M. (2015). Analysis of water use impact assessment methods (part B): applicability for water footprinting and decision making with a laundry case study. International Journal of Life Cycle Assessment, 20(6), 865-879. Lien externe
Boulay, A.-M., Motoshita, M., Pfister, S., Bulle, C., Munoz, I., Franceschini, H., & Margni, M. (2015). Analysis of water use impact assessment methods (part A): evaluation of modeling choices based on a quantitative comparison of scarcity and human health indicators. International Journal of Life Cycle Assessment, 20(1), 139-160. Lien externe
Cao, V., Margni, M., Favis, B. D., & Deschênes, L. (2015). Aggregated indicator to assess land use impacts in life cycle assessment (LCA) based on the economic value of ecosystem services. Journal of Cleaner Production, 94, 56-66. Lien externe
Cardona, M., Boffito, D. C., & Patience, G. S. (2015). Thermogravimetric heat and mass transfer: Modeling of bitumen pyrolysis. Fuel, 143, 253-261. Lien externe
Chaouki, J., & Farag, S. (mai 2015). Energy and chemicals from biomass & waste: the state-of-the-art [Communication écrite]. 3rd International Symposium on Innovation and Technology in the Phosphate Industry (SYMPHOS 2015), Marrakech, Maroc. Non disponible
Chevrier, A., Kouao, A. S. M., Picard, G., Hurtig, M. B., & Buschmann, M. D. (2015). Interspecies Comparison of Subchondral Bone Properties Important for Cartilage Repair. Journal of Orthopaedic Research, 33(1), 63-70. Lien externe
Clerc, F., Chambost, V., & Stuart, P. R. (2015). Developing a viable forest biorefinery strategy. Tappi Journal, 14(9), 561-562. Lien externe
Clerc, F., Chambost, V., & Stuart, P. R. (2015). Lessons learned: Designing the forest biorefinery. Tappi Journal, 14(9), 609-616. Lien externe
Coronado, J., Tartakovsky, B., & Perrier, M. (2015). On-line monitoring of microbial fuel cells operated with pulse-width modulated electrical load. Journal of Process Control, 35, 59-64. Lien externe
D'Elia, N. L., Mathieu, C., Hoemann, C. D., Laiuppa, J. A., Santillán, G. E., & Messina, P. V. (2015). Bone-repair properties of biodegradable hydroxyapatite nano-rod superstructures. Nanoscale, 7(44), 18751-18762. Lien externe
d'Ischia, M., Wakamatsu, K., Cicoira, F., Di Mauro, E., Garcia-Borron, J. C., Commo, S., Galván, I., Ghanem, G., Kenzo, K., Meredith, P., Pezzella, A., Santato, C., Sarna, T., Simon, J. D., Zecca, L., Zucca, F. A., Napolitano, A., & Ito, S. (2015). Melanins and melanogenesis: from pigment cells to human health and technological applications. Pigment Cell & Melanoma Research, 28(5), 520-544. Lien externe
Dalaker, H., Ouzilleau, P., & Chartrand, P. (mars 2015). The application of a recent thermodynamic model for coke crystallites: Chemisorption of methyl groups, decomposition of natural gas, and the reduction of metal oxides [Communication écrite]. 6th International Symposium on High-Temperature Metallurgical Processing, Orlando, FL, United states. Lien externe
Dalil, M. (2015). Dehydration of Glycerol to Acrolein in Fluidized Bed Reactor [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Dalil, M., Carnevali, D., Dubois, J. L., & Patience, G. S. (2015). Transient acrolein selectivity and carbon deposition study of glycerol dehydration over WO3/TiO2 catalyst. Chemical Engineering Journal, 270, 557-563. Lien externe
Del Angel, C., Morales, A. B., Navarro-Pardo, F., Lozano, T., Lafleur, P., Sanchez-Valdes, S., Martinez-Colunga, G., Ramirez-Vargas, E., Alonso, S., & Zitzumbo, R. (2015). Mechanical and rheological properties of polypropylene/bentonite composites with stearic acid as an interface modifier. Journal of Applied Polymer Science, 132(30). Lien externe
Diffo, C., & Stuart, P. R. (février 2015). Techno-Economic Analysis of Lignin-Based Biorefinery Strategies, Case of a Kraft Pulp Mill [Communication écrite]. 100th PaperWeek- BioFor Conference, Montréal, Qc, Canada. Lien externe
Diffo, C., Chambost, V., & Stuart, P. R. (octobre 2015). Exploring Strategies for the Lignin-Based Biorefinery [Communication écrite]. TAPPI International Bioenergy and Bioproducts Conference (IBBC), Atlanta, GA. Non disponible
Dommange, X., Tanguy, P. A., & Jolicoeur, M. (2015). Feasibility of lipid mechanical extraction from viable monoraphidium minutum. Microalgae Biotechnology, 1(1), 12-19. Lien externe
Douïeb, S., Fradette, L., Bertrand, F., & Haut, B. (2015). Impact of the fluid flow conditions on the formation rate of carbon dioxide hydrates in a semi-batch stirred tank reactor. AICHE Journal, 61(12), 4387-4401. Lien externe
Drevelle, O., Sarazin, P., Virgilio, N., & Faucheux, N. (septembre 2015). PCL scaffolds for bone regeneration applications [Affiche]. Tissue Engineering Congress, London, UK. Non disponible
Ebrahimi, Z. F. (2015). An ab initio study on 3, 4-methylenedioxymethamphetamine, MDMA (ecstasy) and its derivatives. International Journal of Computational Biology and Drug Design, 9(1-2). Lien externe
Ebrahimi, Z. F., & Wilson, D. J. D. (2015). DFT investigation of the electronic structure of amphetamines: effect of substituent on O and N chemical shielding and electric field gradient tensors. International Journal of Computational Biology and Drug Design, 8(4), 311-311. Lien externe
Esmaeili Khalil Saraei, A. (2015). Hydrodynamics of Bubble Column Reactors Operating with Non-Newtonian Liquids [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Esmaeili, A., Chaouki, J., & Guy, C. (juin 2015). Developing Correlations for Prediction of Hydrodynamic Parameters in Bubble Column Reactors Operating with Non-Newtonian Liquids [Communication écrite]. 12th International Conference on Gas-Liquid & Gas-Liquid-Solid Reactor Engineering (GLS12), New York, USA. Lien externe
Esmaeili, A., Guy, C., & Chaouki, J. (2015). The effects of liquid phase rheology on the hydrodynamics of a gas-liquid bubble column reactor. Chemical Engineering Science, 129, 193-207. Lien externe
Farag, S., & Chaouki, J. (2015). Economics evaluation for on-site pyrolysis of kraft lignin to value-added chemicals. Bioresource Technology, 175, 254-261. Lien externe
Farag, S., & Chaouki, J. (2015). Microwave heating assisted biorefinery of biomass. Dans Innovative Solutions in Fluid-Particle Systems and Renewable Energy Management (p. 131-166). Lien externe
Farag, S., & Chaouki, J. (2015). A modified microwave thermo-gravimetric-analyzer for kinetic purposes. Applied Thermal Engineering, 75, 65-72. Lien externe
Farag, S., & Chaouki, J. (mai 2015). Preliminary economic assessment for the production of lignin-based chemicals [Communication écrite]. 3rd Annual FIBRE (Forrest Innovations by Research and Education) Conference "The Path Forward", Montréal, Québec. Non disponible
Farag, S., & Chaouki, J. (juin 2015). Technical and economical feasibility of pyrolysis of Kraft lignin [Communication écrite]. TechConnect World Innovation Conference & Expo, Washington, DC. Non disponible
Farahani, R. D., Tavares, J. R., & Dube, M. (juillet 2015). Carbon nanotube-based conductive films for welding of thermoplastic polymers [Communication écrite]. 20th International Conference on Composite Materials (ICCM 2015), Copenhagen, Denmark. Lien externe
Farhanian, D., De Crescenzo, G., & Tavares, J. R. (mars 2015). Synthesis of functional hybrid magnetic nanomaterials in microjet-assisted fluidized bed via PICVD [Communication écrite]. 4th International Conference on Multifunctional, Hybrid and Nanomaterials, Sitges, Espagne. Non disponible
Fereydoon, M., Tabatabaei, S. H., & Ajji, A. (2015). Effect of Uniaxial Stretching on Thermal, Oxygen Barrier, and Mechanical Properties of Polyamide 6 and Poly(m-xylene adipamide) Nanocomposite Films. Polymer Engineering and Science, 55(5), 1113-1127. Lien externe
Fereydoon, M., Tabatabaei, S. H., & Ajji, A. (2015). Properties of co-extruded nanoclay-filled aliphatic nylon (PA6)/linear low-density polyethylene and aromatic nylon (MXD6)/linear low-density polyethylene multilayer films. Journal of Plastic Film & Sheeting, 31(1), 45-77. Lien externe
Florant, M. (2015). Étude expérimentale du mélange solide-liquide : caractérisation de suspensions concentrées avec des solides surnageants [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Fong, D., Ariganello, M. B., Girard-Lauziere, J., & Hoemann, C. D. (2015). Biodegradable chitosan microparticles induce delayed STAT-1 activation and lead to distinct cytokine responses in differentially polarized human macrophages in vitro. Acta Biomaterialia, 12, 183-94. Lien externe
Fortier, C., Louvier, E., Durocher, Y., & De Crescenzo, G. (2015). Tailoring the surface of a gene delivery vector with carboxymethylated dextran: A systematic analysis. Biomacromolecules, 16(6), 1671-1681. Lien externe
Fotovat, F., & Chaouki, J. (2015). Characterization of the upward motion of an object immersed in a bubbling fluidized bed of fine particles. Chemical Engineering Journal, 280, 26-35. Lien externe
Fotovat, F., Abbasi, A., Spiteri, R. J., de Lasa, H., & Chaouki, J. (2015). A CPFD model for a bubbly biomass-sand fluidized bed. Powder Technology, 275, 39-50. Lien externe
Fotovat, F., Ansart, R., Hemati, M., Simonin, O., & Chaouki, J. (2015). Sand-assisted fluidization of large cylindrical and spherical biomass particles: Experiments and simulation. Chemical Engineering Science, 126, 543-559. Lien externe
Fotovat, F., Laviolette, J.-P., & Chaouki, J. (2015). The separation of the main combustible components of municipal solid waste through a dry step-wise process. Powder Technology, 278, 118-129. Lien externe
Fotsing, I. (2015). Étude par voltammétrie cyclique des conditions d'électrodéposition de phosphure de zinc pour des applications photovoltaïques [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Galli, F., Bonfanti, L., Capelli, S., Manenti, F., Bianchi, C. L., Patience, G. S., & Pirola, C. (2015). Heterogeneous Oil Transesterification in a Single-Phase Liquid Mixture using a Co-Solvent for Improved Biofuels Production. Energy Technology, 3(12), 1170-1173. Lien externe
Gazil, O., Gancheva, T., & Virgilio, N. (octobre 2015). Cocontinuous hydrogel/organogel hybrid materials prepared with cocontinuous polymer blends [Présentation]. Dans 65th Canadian Chemical Engineering Conference, Calgary, Alberta. Non disponible
Gbassi, G. K., & Robelin, C. (2015). Thermodynamic evaluation and optimization of the CH₃COOLi-CH₃COOK-CH₃COOCs system using the Modified Quasichemical Model. Fluid Phase Equilibria, 406, 134-141. Lien externe
Ghavidel Mehr, N., Hoemann, C. D., & Favis, B. D. (2015). Chitosan surface modification of fully interconnected 3D porous poly(-caprolactone) by the LbL approach. Polymer (United Kingdom), 64, 112-121. Lien externe
Gheribi, A. E. (juin 2015). Alloy and Process Design using the Mesh Adaptive Direct Search Algorithm [Présentation]. Dans CORS/INFORMS International (CORS/INFORMS 2015), Montréal, QC. Non disponible
Gheribi, A. E., & Chartrand, P. (2015). Effect of grain boundaries on the lattice thermal transport properties of insulating materials: A predictive model. Journal of the American Ceramic Society, 98(3), 888-897. Lien externe
Gheribi, A. E., & Chartrand, P. (mai 2015). Prediction of the thermal conductivity of ionic materials by a new self consistent thermodynamics method [Présentation]. Dans 44th International Conference on Computer Coupling of Phase Diagrams and Thermochemistry (CALPHAD 2015), Loano, Italy. Non disponible
Gheribi, A. E., Gardarein, J. L., Autissier, E., Rigollet, F., Richou, M., & Chartrand, P. (2015). Experimental study of the thermal conductivity of sintered tungsten: Evidence of a critical behaviour with porosity. Applied Physics Letters, 107(9), 094102 (4 pages). Lien externe
Gheribi, A. E., Lee, J. J., & Thibault, P. (2015). A thermodynamic approach for identifying the conditions for gasless detonation. Materials Chemistry and Physics, 149-150, 27-33. Lien externe
Gheribi, A. E., Salanne, M., & Chartrand, P. (2015). Thermal transport properties of halide solid solutions: Experiments vs equilibrium molecular dynamics. Journal of Chemical Physics, 142(12). Lien externe
Gheribi, A. E., Seifitokaldani, A., Wu, P., & Chartrand, P. (2015). An ab initio method for the prediction of the lattice thermal transport properties of oxide systems: Case study of Li₂O and K₂O. Journal of Applied Physics, 118(14), 145101 (5 pages). Lien externe
Gilani, B., & Stuart, P. R. (2015). Life cycle assessment of an integrated forest biorefinery: Hot water extraction process case study. Biofuels, Bioproducts and Biorefining, 9(6), 677-695. Lien externe
Giot, J.-P., Paek, L. S., Nizard, N., El-Diwany, M., Gaboury, L. A., Nelea, M. I., Bou-Merhi, J. S., Harris, P. G., & Danino, M. A. (2015). The double capsules in macro-textured breast implants. Biomaterials, 67, 65-72. Lien externe
Grmela, M. (2015). Geometry of Multiscale Nonequilibrium Thermodynamics. Entropy, 17(9), 5938-5964. Disponible
Grmela, M., Ammar, A., & Maîtrejean, G. (2015). Multiscale Mechanics and Thermodynamics of Suspensions. Dans Rheology of Non-Spherical Particle Suspensions (p. 313-377). Lien externe
Grmela, M., Klika, V., & Pavelka, M. (2015). Reductions and extensions in mesoscopic dynamics. Physical Review E, 92(3), 032111 (20 pages). Lien externe
Guo, S.-Z., Yang, X., Heuzey, M.-C., & Therriault, D. (2015). 3D printing of a multifunctional nanocomposite helical liquid sensor. Nanoscale, 7(15), 6451-6456. Lien externe
Guo, X. H., Zhang, X., Zhao, L. Y., Zhang, N. X., & Yi, Z. (2015). Synthesis and crystal structure of cadmium coordination polymer with 1,3,5-benzenetricarboxylic acid. Crystallography Reports, 60(6), 860-864. Lien externe
Hamidian, A. (2015). Feasibility of Biomass Biodrying for Gasification Process [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Hammami, I., & Jolicoeur, M. (2015). Glutamine and Cancer Immunosuppression. Dans Rajendram, R., Preedy, V. R., & Patel, V. B. (édit.), Glutamine in Clinical Nutrition (p. 475-486). Lien externe
Harvey, J.-P., Gheribi, A. E., & Asimow, P. D. (2015). A self-consistent optimization of multicomponent solution properties: Ab initio molecular dynamic simulations and the MgO-SiO₂ miscibility gap under pressure. Geochimica Et Cosmochimica Acta, 161, 146-165. Lien externe
Harvey, V. C., Farand, P., Legros, R., & Tavares, J. R. (2015). On the average perception of perceived averages. Education for Chemical Engineers, 12, 12-19. Disponible
Hidayat, T., Shishin, D., Jak, E., & Decterov, S. (2015). Thermodynamic reevaluation of the Fe-O system. CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry, 48, 131-144. Lien externe
Hoemann, C. D., Tran-Khanh, N., Chevrier, A., Chen, G., Lascau-Coman, V., Mathieu, C., Changoor, A., Yaroshinsky, A., McCormack, R. G., Stanish, W. D., & Buschmann, M. D. (2015). Chondroinduction Is the Main Cartilage Repair Response to Microfracture and Microfracture With BST-CarGel: Results as Shown by ICRS-II Histological Scoring and a Novel Zonal Collagen Type Scoring Method of Human Clinical Biopsy Specimens. American Journal of Sports Medicine, 43(10), 2469-2480. Lien externe
Hosseininasab, S. E., Faucheux, N., Soucy, G., & Tavares, J. R. (juin 2015). Surface modification of single-wall carbon nanotubes (SWCNTs) by photo-initiated chemical vapor deposition (PICVD) using syngas [Communication écrite]. 10th Annual TechConnect World Innovation Conference and Expo ; held Jointly with the 18th Annual Nanotech Conference and Expo, and the 2015 National SBIR/STTR Conference, Washington, DC, United states. Lien externe
Hosseininasab, S., Faucheux, N., Soucy, G., & Tavares, J. R. (juin 2015). Functionalization of single-wall carbon nanotubes by photo-initiatied chemical vapor deposition (PICVD) [Communication écrite]. Colloque Plasma-Québec, Montréal, Québec. Non disponible
Ilinca, F., Ajersch, F., & Goodwin, F. E. (mai 2015). Numerical Analysis of the Modification of Flow Using a Pumping System in the Galvanizing Bath [Communication écrite]. 10th International Conference on Zinc and Zinc Alloy Coated Steel Sheet (Galvatech 2015), Toronto, ON, Canada. Non disponible
Jalali Dil, E. (2015). Localization of Solid Micro and Nano-Inclusions in Heterophase Bioplastic Blends [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Jalali Dil, E., & Favis, B. D. (2015). Localization of micro and nano- silica particles in a high interfacial tension poly(lactic acid)/low density polyethylene system. Polymer, 77, 156-166. Lien externe
Jalali Dil, E., & Favis, B. D. (2015). Localization of micro- and nano-silica particles in heterophase poly(lactic acid)/poly(butylene adipate-co-terephthalate) blends. Polymer, 76, 295-306. Lien externe
Jalali Dil, E., Carreau, P., & Favis, B. D. (2015). Morphology, miscibility and continuity development in poly(lactic acid)/poly(butylene adipate-co-terephthalate) blends. Polymer, 68, 202-212. Lien externe
Javanbakht, T., Laurent, S., Stanicki, D., Raphael, W., & Tavares, J. R. (2015). Charge effect of superparamagnetic iron oxide nanoparticles on their surface functionalization by photo-initiated chemical vapour deposition. Journal of Nanoparticle Research, 17(12). Disponible
Jegat, C., Virgilio, N., & Favis, B. D. (novembre 2015). Design d'une interface hydrophile/hydrophobe dans un matériau polymère à réservoirs lipidiques [Présentation]. Dans 44e Colloque national du Groupe français d'études et d'applications des polymères, Belvaux, Luxembourg. Non disponible
Kabbara, M., Gazil, O., Gancheva, T., & Virgilio, N. (octobre 2015). Tunable microporous organogels prepared with cocontinuous polymer blends [Présentation]. Dans 65th Canadian Chemical Engineering Conference, Calgary, Alberta. Non disponible
Kannangara, M. S. (2015). Development and Integration of Acid Precipitation Based Lignin Biorefineries in Kraft Pulping Mills [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Karami, S. (2015). Polylactide Based Nanocomposites : Processing, Structure and Performance Relationship [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Karami, S., & Lafleur, P. (2015). Role of chain dynamics and topological confinements in cold crystallization of PLA-clay nanocomposites. Polymer Engineering and Science, 55(6), 1310-1320. Lien externe
Kasparek, E., Wertheimer, M. R., Tavares, J. R., & Girard-Lauriault, P. L. (mars 2016). Vacuum ultraviolet deposition of organic coatings [Communication écrite]. McGill-Polytechnique Chemical Engineering Research Day, Montréal, Québec. Non disponible
Kolahchi, A. R., Ajji, A., & Carreau, P. (2015). Enhancing Hydrophilicity of Polyethylene Terephthalate Surface Through Melt Blending. Polymer Engineering and Science, 55(2), 349-358. Lien externe
Kolahchi, A. R., Ajji, A., & Carreau, P. (juin 2014). Improvement of PET surface hydrophilicity and roughness through blending [Communication écrite]. 30th International Conference of the Polymer Processing Society (PPS-30), Cleveland, Ohio, USA (4 pages). Lien externe
Kumar, P., Yi, Z., Zhang, S., Sekar, A., Soavi, F., & Cicoira, F. (2015). Effect of channel thickness, electrolyte ions, and dissolved oxygen on the performance of organic electrochemical transistors. Applied Physics Letters, 107(5). Lien externe
Labonte, M., & Dubois, C. (2015). Processing of Impact Modifed PLA in a Continous Process at High Speed: Comparison with PET Molding Conditions - A New Era. Polymer-Plastics Technology and Engineering, 54(4), 368-374. Lien externe
Labonté, V., Virgilio, N., & Tavares, J. R. (octobre 2015). Dispersion stability of polystyrene-divinylbenzene microbeads through a chemical vapor deposition process using syngas [Affiche]. 65th Canadian Chemical Engineering Conference, Calgary, Alberta. Non disponible
Labonté, V., Virgilio, N., & Tavares, J. R. (octobre 2015). Solving a performance validation issue for automated visible inspection system [Présentation]. Dans 65th Canadian Chemical Engineering Conference, Calgary, Alberta. Non disponible
Lanteigne, J.-R., Laviolette, J.-P., & Chaouki, J. (2015). Behavior of sulfur during the pyrolysis of tires. Energy and Fuels, 29(2), 763-774. Lien externe
Lanteigne, J.-R., Laviolette, J.-P., & Chaouki, J. (2015). Determination of enthalpy of Pyrolysis from DSC and industrial reactor Data: Case of tires. Chemical Product and Process Modeling, 10(2), 97-111. Lien externe
Lassaigne, M. (2015). Étude expérimentale du mélange solide-liquide : caractérisation des suspensions concentrées en milieu visqueux [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Latifi, M., & Chaouki, J. (2015). A novel induction heating fluidized bed reactor: Its design and applications in high temperature screening tests with solid feedstocks and prediction of defluidization state. AICHE Journal, 61(5), 1507-1523. Lien externe
Latifi, M., Berruti, F., & Briens, C. (2015). Thermal and catalytic gasification of bio-oils in the Jiggle Bed Reactor for syngas production. International Journal of Hydrogen Energy, 40(17), 5856-5868. Lien externe
Lebon, G., Machrafi, H., & Grmela, M. (2015). An extended irreversible thermodynamic modelling of size-dependent thermal conductivity of spherical nanoparticles dispersed in homogeneous media. Proceedings of the Royal Society a-Mathematical Physical and Engineering Sciences, 471(2182), 14-14. Lien externe
Lee, H. (2015). Development of Lactic and Succinic Acid Biorefinery Configurations for Integration into a Thermomechanical Pulp Mill [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Legros, R., Farand, P., Perrier, M., Bertrand, F., Dubois, C., & Klvana, D. (octobre 2015). Horizontal Integration of Core Courses in Chemical Engineering : 10 years after [Communication écrite]. 65th CSChE Annual Meeting, Calgary, Alberta. Non disponible
Lenfant, G., Heuzey, M.-C., van de Ven, T. G. M., & Carreau, P. (2015). Intrinsic viscosity of suspensions of electrosterically stabilized nanocrystals of cellulose. Cellulose, 22(2), 1109-1122. Lien externe
Lessard, P. (2015). Ergonomic guitar and harness. (Demande de brevet no US20150302838). Lien externe
Levasseur, A. (2015). Climate Change. Dans Hauschild, M. Z., & Huijbregts, M. A. J. (édit.), Life Cycle Impact Assessment (p. 39-50). Lien externe
Liu, X. X., Wang, C., Liu, L. Y., Zhou, S. M., & Luo, Y. Y. (2015). Rheological properties of the polysaccharide-protein complex from longan (Dimocarpus longan Lour.) pulp. RSC Advances, 5(72), 58663-58668. Lien externe
Lotfi, S. (2015). Catalytic Upgrading of Softwood Kraft Lignin to Value Added Chemicals [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Lotfi, S., Boffito, D. C., & Patience, G. S. (2015). Gas-Phase Partial Oxidation of Lignin to Carboxylic Acids over Vanadium Pyrophosphate and Aluminum-Vanadium-Molybdenum. ChemSusChem: Chemistry & Sustainability-Energy & Materials, 8(20), 3424-3432. Lien externe
Ma, Z., Trevisanut, C., Neagoe, C., Boffito, D. C., Jazayeri, S. M., Jagpal, C., & Patience, G. S. (mai 2015). A micro-refinery unit for the GTL transformation of associated natural gas [Communication écrite]. EIC Climate Change Technology Conference (CCTC 2015), Montréal, Québec (10 pages). Lien externe
Masoumi, S., Towfighi, J., Mohamadalizadeh, A., Kooshki, Z., & Rahimi, K. (2015). Tri-templates synthesis of SAPO-34 and its performance in MTO reaction by statistical design of experiments. Applied Catalysis A-General, 493, 103-111. Lien externe
Matet, M., Heuzey, M.-C., Ajji, A., & Sarazin, P. (2015). Plasticized chitosan/polyolefin films produced by extrusion. Carbohydrate Polymers, 117, 177-184. Lien externe
Maurice, E. (2015). Modélisation temporelle de la consommation électrique en analyse du cycle de vie appliquée au contexte des TIC [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Mechmech, F., Chadjaa, H., Rahni, M., Marinova, M., Ben Akacha, N., & Gargouri, M. (2015). Improvement of butanol production from a hardwood hemicelluloses hydrolysate by combined sugar concentration and phenols removal. Bioresource Technology, 192, 287-295. Lien externe
Mechmech, F., Marinova, M., Chadjaa, H., Rahni, M., Ben Akacha, N., & Gargouri, M. (2015). Alfalfa juice as a nitrogen source or supplement for acetone-butanol-ethanol production by Clostridium acetobutylicum. Industrial Crops and Products, 78, 73-81. Lien externe
Mehand, M. S., Srinivasan, B., & De Crescenzo, G. (2015). Optimizing Multiple Analyte Injections in Surface Plasmon Resonance Biosensors with Analytes having Different Refractive Index Increments. Scientific Reports, 5(1). Disponible
Mehr, N. G., Li, X., Chen, G., Favis, B. D., & Hoemann, C. D. (2015). Pore size and LbL chitosan coating influence mesenchymal stem cell in vitro fibrosis and biomineralization in 3D porous poly(epsilon-caprolactone) scaffolds. Journal of Biomedical Materials Research - Part A, 103(7), 2449-2459. Lien externe
Melendez Esquivel, J. A. (2015). Biomass Procurement Cost Minimization for Implementation of a Retrofit Biorefinery in a Pulp and Paper Mill [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Mighri, N., Mao, J., Mighri, F., Ajji, A., & Rouabhia, M. (2015). Chitosan-Coated Collagen Membranes Promote Chondrocyte Adhesion, Growth, and Interleukin-6 Secretion. Materials, 8(11), 7673-7689. Disponible
Moayeri, A. (2015). Development of Graphene-Based Polymer Nanocomposites for Electrical Conductors and Supercapacitors [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Moayeri, A., & Ajji, A. (2015). Fabrication of polyaniline/poly(ethylene oxide)/non-covalently functionalized graphene nanofibers via electrospinning. Synthetic Metals, 200, 7-15. Lien externe
Mohammdi, S. R., Ajji, A., & Tabatabaei, S. H. (juin 2014). Peel/seal properties of poly(ethylene methyl acrylate)/polybutene-1 blend films [Communication écrite]. 30th International Conference of the Polymer Processing Society (PPS-30), Cleveland, Ohio, USA (4 pages). Lien externe
Mohammedi, D., Ismail, F., Rehamnia, R., Bensalem, R., & Savadogo, O. (2015). Corrosion behaviour of steel in the presence of rare earth salts: Synergistic effect. Corrosion Engineering Science and Technology, 50(8), 633-638. Lien externe
Mohebbi, A., Mighri, F., Ajji, A., & Rodrigue, D. (2015). Current issues and challenges in polypropylene foaming: A review. Cellular Polymers, 34(6), 299-337. Lien externe
Morales-Cepeda, A. B., Ponce-Medina, M. E., Salas-Papayanopolos, H., Lozano, T., Zamudio, M., & Lafleur, P. (2015). Preparation and characterization of candelilla fiber (Euphorbia antisyphilitica) and its reinforcing effect in polypropylene composites. Cellulose, 22(6), 3839-3849. Lien externe
Mu, Y., Zhang, S., Yue, S. Z., Wu, Q. Y., & Zhao, Y. (2015). High efficiency yellow organic light-emitting diodes with optimized barrier layers. Solid-State Electronics, 114, 87-89. Lien externe
Muller, S. (2015). Estimation de l'incertitude sur les flux d'inventaire du cycle de vie - modélisation et développement de facteurs empiriques pour l'approche pedigree [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Murschel, F., Zaimi, A., Noel, S., Jolicoeur, M., & De Crescenzo, G. (2015). Specific Adsorption via Peptide Tags: Oriented Grafting and Release of Growth Factors for Tissue Engineering. Biomacromolecules, 16(11), 3445-3454. Lien externe
Najafi Chaloupli, N., Heuzey, M.-C., Carreau, P., & Therriault, D. (2015). Quiescent and shear-induced crystallization of linear and branched polylactides. Rheologica Acta, 54(9-10), 831-845. Disponible
Najafi, N., Heuzey, M.-C., Carreau, P., Therriault, D., & Park, C. B. (2015). Mechanical and morphological properties of injection molded linear and branched-polylactide (PLA) nanocomposite foams. European Polymer Journal, 73, 455-465. Lien externe
Najarzadeh, Z., Ajji, A., & Bruchet, J. B. (2015). Interfacial self-adhesion of polyethylene blends: the role of long chain branching and extensional rheology. Rheologica Acta, 54(5), 377-389. Lien externe
Natale, G. (2015). Flow Induced Orientation in Carbon Nanotube Suspension: Modeling and Experiments [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Natale, G., Reddy, N. K., Ausias, G., Ferec, J., Heuzey, M.-C., & Carreau, P. (2015). Rheo-optical response of carbon nanotube suspensions. Journal of Rheology, 59(2), 499-524. Lien externe
Nguwuo Petuenju, E. (2015). Élaboration et caractérisation de couches minces de CuInS2 déposées par la pyrolyse par pulvérisation ultrasonique à base de transducteur [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Noel, S., Hachem, A., Merhi, Y., & De Crescenzo, G. (2015). Development of a polyester coating combining antithrombogenic and cell adhesive properties: Influence of sequence and surface density of adhesion peptides. Biomacromolecules, 16(6), 1682-1694. Lien externe
Nofar, M., Maani, A., Sojoudi, H., Heuzey, M.-C., & Carreau, P. (2015). Interfacial and rheological properties of PLA/PBAT and PLA/PBSA blends and their morphological stability under shear flow. Journal of Rheology, 59(2), 317-333. Lien externe
Nouri, S. (2015). Improving the Processability of Polylactide for Film Blowing Application [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Nouri, S., Dubois, C., & Lafleur, P. (2015). Effect of chemical and physical branching on rheological behavior of polylactide. Journal of Rheology, 59(4), 1045-1063. Lien externe
Nouri, S., Dubois, C., & Lafleur, P. (2015). Homocrystal and stereocomplex formation behavior of polylactides with different branched structures. Polymer (United Kingdom), 67, 227-239. Lien externe
Nouri, S., Dubois, C., & Lafleur, P. (2015). Synthesis and characterization of polylactides with different branched architectures. Journal of Polymer Science, Part B: Polymer Physics, 53(7), 522-531. Lien externe
Nouri, S., Lafleur, P., & Dubois, C. (2015). Enhanced film blowing of polylactide by incorporating branched chains and stereocomplex crystals. International Polymer Processing, 30(4), 500-510. Lien externe
Ouzilleau, P., Gheribi, A. E., & Chartrand, P. (juillet 2015). A size-dependent thermodynamic model for graphitic crystallites integrating the binary interactions of sulfur/hydrogen with carbon up to 2500 K [Présentation]. Dans The World's Carbon Conference (CARBON 2015), Dresden, Germany. Non disponible
Ouzilleau, P., Gheribi, A. E., & Chartrand, P. (mars 2015). A size-dependent thermodynamic model for the carbon-hydrogen-sulfur system in coke crystallites: Application to the production of pre-baked carbon anodes [Présentation]. Dans 144th TMS Annual Meeting & Exhibition (TMS 2015), Orlando, FL, USA. Lien externe
Ouzilleau, P., Gheribi, A. E., & Chartrand, P. (2015). A Size-Dependent Thermodynamic Model for the Carbon/Hydrogen/Sulfur System in Coke Crystallites: Application to the Production of Pre-Baked Carbon Anodes. Dans Light Metals 2015 (p. 1067-1072). Lien externe
Ouzilleau, P., Gheribi, A. E., Eriksson, G., Lindberg, D. K., & Chartrand, P. (2015). A size-dependent thermodynamic model for coke crystallites: The carbon-hydrogen system up to 2500 K. Carbon, 85, 99-118. Lien externe
Paek, L. S., Giot, J.-P., Tétreault-Paquin, J.-O., St-Jacques, S., Nelea, M. I., & Danino, M. A. (2015). The Impact of Postoperative Expansion Initiation Timing on Breast Expander Capsular Characteristics: A Prospective Combined Clinical and Scanning Electron Microscopy Study. Plastic and Reconstructive Surgery, 135(4), 967-974. Lien externe
Patel, J. D., Mighri, F., Ajji, A., & Chaudhuri, T. K. (2015). Development of CdS nanostructures by thermal decomposition of aminocaproic acid-mixed Cd-thiourea complex precursor: Structural, optical and photocatalytic characterization. Journal of Nanoscience and Nanotechnology, 15(4), 2733-2741. Lien externe
Patience, G. S., Boffito, D. C., & Patience, P. (2015). Communicate Science Papers, Presentations, and Posters Effectively. Lien externe
Patience, G. S., Boffito, D. C., & Patience, P. A. (2015). How do you write and present research well? The Canadian Journal of Chemical Engineering, 93(10), 1693-1696. Disponible
Patience, G. S., Boffito, D. C., & Patience, P. A. (2015). How do you write and present research well? 1 - Admit that you did it. Canadian Journal of Chemical Engineering, 93(11), 1889-1890. Lien externe
Patience, G. S., Shekari, A., & Farrie, Y. (2015). Methods for the valorization of carbohydrates. (Brevet no US9145350). Lien externe
Patience, P. A., Patience, G. S., & Boffito, D. C. (2015). How do you write and present research well? 2 - Replace 007 with an explicit agent. Canadian Journal of Chemical Engineering, 93(12), 2095-2097. Lien externe
Pauliuk, S., Majeau-Bettez, G., & Muller, D. B. (2015). A General System Structure and Accounting Framework for Socioeconomic Metabolism. Journal of Industrial Ecology, 19(5), 728-741. Lien externe
Pauliuk, S., Majeau-Bettez, G., Mutel, C. L., Steubing, B., & Stadler, K. (2015). Lifting Industrial Ecology Modeling to a New Level of Quality and Transparency: A Call for More Transparent Publications and a Collaborative Open Source Software Framework. Journal of Industrial Ecology, 19(6), 937-949. Lien externe
Pelton, A., Stamatakis, M. G., Kelepertzis, E., & Panagou, T. (2015). The origin and archaeometallurgy of a mixed sulphide ore for copper production on the island of Kea, Aegean Sea, Greece. Archaeometry, 57(2), 318-343. Lien externe
Pérez-Rocha, D., Morales-Cepeda, A. B., Navarro-Pardo, F., Lozano-Ramírez, T., & Lafleur, P. (2015). Carbon Fiber Composites of Pure Polypropylene and Maleated Polypropylene Blends Obtained from Injection and Compression Moulding. International Journal of Polymer Science, 2015, 1-8. Disponible
Peshkov, I., Grmela, M., & Romenski, E. (2015). Irreversible mechanics and thermodynamics of two-phase continua experiencing stress-induced solid-fluid transitions. Continuum Mechanics and Thermodynamics, 27(6), 905-940. Lien externe
Pfister, S., Bare, J., Benini, L., Berger, M., Bulle, C., Lathuilliere, M., Manzardo, A., Margni, M., Motoshita, M., Núñez, M., Pastor, A. V., Ridoutt, B., Worbe, S., & Boulay, A.-M. (octobre 2015). Outcome of WULCA harmonization activities : recommended characterization factors for water footprinting [Présentation]. Dans 2015 International Conference on Life Cycle Assessment as Reference Methodology for Assessing Supply Chains and Supporting Global Sustainability Challenges : LCA for Feeding the Planet and Energy for Life, Stresa, Italy (19 pages). Lien externe
Picard, F. (2015). Traitement des sols contaminés aux hydrocarbures C10-C50 et aux métaux lourds Cu, Pb, Zn [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Pickenhahn, V., Darras, V., Dziopa, F., Biniecki, K., De Crescenzo, G., Lavertu, M., & Buschmann, M. D. (2015). Regioselective thioacetylation of chitosan end-groups for nanoparticle gene delivery systems. Chemical Science, 6(8), 4650. Disponible
Plouffe, G., Bulle, C., & Deschênes, L. (2015). Assessing the variability of the bioavailable fraction of zinc at the global scale using geochemical modeling and soil archetypes. International Journal of Life Cycle Assessment, 20(4), 527-540. Lien externe
Plouffe, G., Bulle, C., & Deschênes, L. (2015). Case study: taking zinc speciation into account in terrestrial ecotoxicity considerably impacts life cycle assessment results. Journal of Cleaner Production, 108(Part A), 1002-1008. Lien externe
Plouffe, G., Bulle, C., & Deschênes, L. (2015). Erratum to : "Assessing the variability of the bioavailable fraction of zinc at the global scale using geochemical modeling and soil archetypes". The International Journal of Life Cycle Assessment, 20(4), 576-576. Lien externe
Pontes Lima, R. J. (2015). Synthesis of Metal-Polymer Nanocomposites for Fuel Applications [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Prostakova, V., Chen, J., Jak, E., & Decterov, S. (2015). Experimental investigation and thermodynamic modeling of the (NiO + CaO + SiO2), (NiO + CaO + MgO) and (NiO + CaO + MgO + SiO2) systems. Journal of Chemical Thermodynamics, 86, 130-142. Lien externe
Rasouli, M. (2015). Dynamics of Cylindrical Particles in a Rotating Drum Using Multiple Radioactive Particle Tracking [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Rasouli, M., Bertrand, F., & Chaouki, J. (2015). A multiple radioactive particle tracking technique to investigate particulate flows. AICHE Journal, 61(2), 384-394. Lien externe
Ridoutt, B., Fantke, P., Pfister, S., Bare, J., Boulay, A.-M., Cherubini, F., Frischknecht, R., Hauschild, M., Hellweg, S., Henderson, A., Jolliet, O., Levasseur, A., Margni, M., McKone, T., Michelsen, O., Mil I Canals, L., Page, G., Pant, R., Raugei, M., ... Wiedmann, T. (2015). Making sense of the minefield of footprint indicators. Environmental Science and Technology, 49(5), 2601-2603. Lien externe
Rifflart, S., Patience, G. S., & Chiron, F. X. (2015). Method for producing synthesis gases. (Brevet no US8974699). Lien externe
Rizvi, A., Park, C. B., & Favis, B. D. (2015). Tuning viscoelastic and crystallization properties of polypropylene containing in-situ generated high aspect ratio polyethylene terephthalate fibrils. Polymer (United Kingdom), 68, 83-91. Lien externe
Robelin, C., Chartrand, P., & Pelton, A. (2015). Thermodynamic evaluation and optimization of the (NaNO₃ + KNO₃ + Na₂SO₄ + K₂SO₄) system. Journal of Chemical Thermodynamics, 83, 12-26. Lien externe
Robitaille, J. (2015). Modélisation dynamique de cultures de cellules CHO produisant un anticorps monoclonal en mode cuvée-alimentée [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Robitaille, J., Chen, J., & Jolicoeur, M. (2015). A Single Dynamic Metabolic Model Can Describe mAb Producing CHO Cell Batch and Fed-Batch Cultures on Different Culture Media. PLOS One, 10(9). Disponible
Rosenbaum, R. K., Anton, A., Bengoa, X., Bjørn, A., Brain, R., Bulle, C., Cosme, N., Dijkman, T. J., Fantke, P., Felix, M., Geoghegan, T. S., Gottesbüren, B., Hammer, C., Humbert, S., Jolliet, O., Juraske, R., Lewis, F., Maxime, D., Nemecek, T., ... Wallman, M. (2015). The Glasgow consensus on the delineation between pesticide emission inventory and impact assessment for LCA. International Journal of Life Cycle Assessment, 20(6), 765-776. Lien externe
Rostamizadeh, M., & Taeb, A. (2015). Highly selective Me-ZSM-5 catalyst for methanol to propylene (MTP). Journal of Industrial and Engineering Chemistry, 27, 297-306. Lien externe
Sabri, F., Drevelle, O., Fradette, L., Tavares, J. R., & Virgilio, N. (mars 2016). Processing of magnetic solid stabilized emulsions [Communication écrite]. McGill-Polytechnique Chemical Engineering Research Day, Montréal, Québec. Non disponible
Saffar, A., Tabatabaei, S. H., Carreau, P., Ajji, A., & Kamal, M. R. (2015). Rheology of PP/PP-g-MA and PP/PP-g-AA Blends and Incidence on Orientation and Crystalline Structure of Their Cast Films. Industrial & Engineering Chemistry Research, 54(43), 10787-10795. Lien externe
Samih, S., & Chaouki, J. (2015). Development of a fluidized bed thermogravimetric analyzer. AICHE Journal, 61(1), 84-89. Lien externe
Sanhye, W. (2015). Simulation du cycle de refroidissement lors de la coulée d'explosifs fusibles [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Sanhye, W., Dubois, C., Laroche, I., & Pelletier, P. (octobre 2015). Simulation of the Cooling and Phase Change of a Melt-Cast Explosive [Communication écrite]. COMSOL 2015, Boston, Mass.. Lien externe
Sauriol, P., Rakib, A., Shabanian, J., Jafari, R., Bai, D., & Chaouki, J. (juin 2015). Simultaneous reduction of sulfur oxides and mercury emissions during co-combustion of coal with ReEngineered Feedstock™ (ReEF) in bubbling fluidized bed combustor [Communication écrite]. 22nd International Conference on Fluidized Bed Conversion, Turku, Finland. Non disponible
Savoji, H., Lerouge, S., Ajji, A., & Wertheimer, M. R. (2015). Plasma-etching for controlled modification of structural and mechanical properties of electrospun PET scaffolds. Plasma Processes and Polymers, 12(4), 314-327. Lien externe
Savoji, H., Maire, M., Hadjizadeh, A., Ajji, A., Lerouge, S., & Wertheimer, M. R. (avril 2015). 3D Electrospun Scaffolds for Vascular Graft Applications: Fine Tuning of Properties by Plasma-Assisted Etching and Coating [Communication écrite]. 58th Annual Technical Conference, Santa Clara, CA USA. Lien externe
Sayago, J., Xiang, M., Quenneville, F., Liang, S., Bourbeau, É., Soavi, F., Cicoira, F., & Santato, C. (2015). Electrolyte-gated polymer thin film transistors making use of ionic liquids and ionic liquid-solvent mixtures. Journal of Applied Physics, 117(11), 6 pages. Lien externe
Seifitokaldani, A., & Gheribi, A. E. (2015). Thermodynamically self-consistent method to predict thermophysical properties of ionic oxides. Computational Materials Science, 108(Part A.), 17-26. Lien externe
Seifitokaldani, A., & Savadogo, O. (2015). Electrochemically Stable Titanium Oxy-Nitride Support for Platinum Electro-Catalyst for PEM Fuel Cell Applications. Electrochimica Acta, 167, 237-245. Lien externe
Seifitokaldani, A., Oishi, K., Perrier, M., & Savadogo, O. (2015). Electrochemical and physicochemical properties of titanium Oxy-nitride electrocatalyst prepared by sol-gel methods for the oxygen reduction reaction purposes. Journal of Solid State Electrochemistry, 19(10), 3097-3109. Lien externe
Seifitokaldani, A., Savadogo, O., & Perrier, M. (2015). Stability and catalytic activity of titanium oxy-nitride catalyst prepared by in-situ urea-based sol-gel method for the oxygen reduction reaction (ORR) in acid medium. International Journal of Hydrogen Energy, 40(33), 10427-10438. Lien externe
Shabanian, J. (2015). Hydrodynamics of a Gas-Solid Fluidized Bed at High Temperature in the Presence of Interparticles Forces [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Shabanian, J., & Chaouki, J. (2015). Hydrodynamics of a gas-solid fluidized bed with thermally induced interparticle forces. Chemical Engineering Journal, 259, 135-152. Lien externe
Shabanian, J., Sauriol, P., Rakib, A., & Chaouki, J. (mai 2014). Application of temperature and pressure signals for early detection of defluidization conditions [Communication écrite]. 7th World Congress on New Paradigm of Particle Science and Technology (WCPT 2014), Beijing, China. Publié dans Procedia Engineering, 102. Lien externe
Shahverdi-Shahraki, K., Ghosh, T., Mahajan, K., Ajji, A., & Carreau, P. (2015). Effect of dry grinding on chemically modified kaolin. Applied Clay Science, 105-106, 100-106. Lien externe
Shahverdi-Shahraki, K., Ghosh, T., Mahajan, K., Ajji, A., & Carreau, P. (2015). Polyethylene terephthalate/calcined kaolin composites: Effect of uniaxial stretching on the properties. Polymer Engineering and Science, 55(8), 1767-1775. Lien externe
Shishin, D., Jak, E., & Decterov, S. (2015). Critical Assessment and Thermodynamic Modeling of the Fe-O-S System. Journal of Phase Equilibria and Diffusion, 36(3), 224-240. Lien externe
Shishin, D., Jak, E., & Decterov, S. (2015). Thermodynamic assessment and database for the Cu-Fe-O-S system. CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry, 50, 144-160. Lien externe
Sim, S., Chevrier, A., Garon, M., Quenneville, E., & Buschmann, M. D. (2015). Correlation of non-destructive electromechanical probe (arthro-BST) assessment with histological scores and mechanical properties in human tibial plateau. Osteoarthritis and Cartilage, 23, A235-A236. Lien externe
Sim, S., Garon, M., Quenneville, E., & Buschmann, M. D. (2015). Wound Healing Revealed by a Novel Automated Indentation Technique. Tissue Engineering - Part A, 21, S91-S91. Lien externe
Sonnemann, G., Gemechu, E. D., Adibi, N., De Bruille, V., & Bulle, C. (2015). From a critical review to a conceptual framework for integrating the criticality of resources into Life Cycle Sustainability Assessment. Journal of Cleaner Production, 94, 20-34. Lien externe
St-Charles, J.-C. (2015). Synthèse de polymères thermoplastiques énergétiques riches en azote [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Tabasi, R. Y., & Ajji, A. (2015). Selective degradation of biodegradable blends in simulated laboratory composting. Polymer Degradation and Stability, 120, 435-442. Lien externe
Tabasi, R. Y., Najarzadeh, Z., & Ajji, A. (2015). Development of high performance sealable films based on biodegradable/compostable blends. Industrial Crops and Products, 72, 206-213. Lien externe
Taing, E., Bulle, C., & Deschênes, L. (2015). Including organic mixture influence on dioxins and furans fate for toxic impact assessment in a life cycle context. International Journal of Life Cycle Assessment, 20(2), 289-298. Lien externe
Talebi-Esfandarani, M., & Savadogo, O. (2015). Effect of ethylene glycol on morphology, crystallinity, and electrochemical properties of LiFePO₄/C in lithium-ion batteries. Journal of Applied Electrochemistry, 45(3), 245-251. Lien externe
Tang, H., Kumar, P., Zhang, S., Yi, Z., De Crescenzo, G., Santato, C., Soavi, F., & Cicoira, F. (2015). Conducting polymer transistors making use of activated carbon gate electrodes. ACS Applied Materials & Interfaces, 7(1), 969-973. Lien externe
Tavares, J. R. (juillet 2015). Ingénierie polyvalente des surfaces par voie photochimique (PICVD) [Communication écrite]. Journée technique fonctionnalisation de surfaces (couches minces) du Pôle Européen de la Céramique, Limoges, France. Non disponible
Tavares, J. R. (octobre 2015). Photochemical functionalization of nanoparticles [Communication écrite]. S.Net Conference (Ne3LS 2015), Montréal, Québec. Non disponible
Tavares, J. R. (octobre 2015). Troubleshooting as a process design learning tool [Communication écrite]. Canadian Chemical Engineering Conference, Calgary, Alberta. Non disponible
Tavares, J. R., Virgilio, N., & Labonté, V. (décembre 2015). Photochemical surface engineering of polymer micro-beads : an example of industrial collaboration [Communication écrite]. 10e Colloque annuel du CREPEC, Montréal, Québec. Non disponible
Tebianian, S., Dubrawski, K., Ellis, N., Cocco, R. A., Hays, R., Reddy Karri, S. B., Leadbeater, T. W., Parker, D. J., Chaouki, J., Jafari, R., Garcia-Trinanes, P., Seville, J. P. K., & Grace, J. R. (2015). Investigation of particle velocity in FCC gas-fluidized beds based on different measurement techniques. Chemical Engineering Science, 127, 310-322. Lien externe
Thompson, C. M., Petiot, E., Mullick, A., Aucoin, M. G., Henry, O., & Kamen, A. A. (2015). Critical assessment of influenza VLP production in Sf9 and HEK293 expression systems. BMC Biotechnology, 15(1). Disponible
Tsabet, È., & Fradette, L. (2015). Effect of processing parameters on the production of Pickering emulsions. Industrial and Engineering Chemistry Research, 54(7), 2227-2236. Lien externe
Tsabet, È., & Fradette, L. (2015). Effect of the properties of oil, particles, and water on the production of Pickering emulsions. Chemical Engineering Research and Design, 97, 9-17. Lien externe
Tsabet, È., & Fradette, L. (2015). Semiempirical Approach for Predicting the Mean Size of Solid-Stabilized Emulsions. Industrial & Engineering Chemistry Research, 54(46), 11661-11677. Lien externe
Tucny, J.-M., Vidal, D., Bertrand, F., & Drolet, F. (octobre 2015). Prediction of the Impact of Fiber Polydispersity on Filter Efficiency [Communication écrite]. 65th CSChE Annual Meeting, Calgary, Alberta. Non disponible
Varzaneh, A. Z., Towfighi, J., Kootenaei, A. H. S., & Mohamadalizadeh, A. (2015). Effect of cerium and zirconium nanoparticles on the structure and catalytic performance of SAPO-34 in steam cracking of naphtha to light olefins. Reaction Kinetics Mechanisms and Catalysis, 115(2), 719-740. Lien externe
Vekemans, O. G. (2015). Améliorer les performances environnementales des centrales à charbon pulvérisé via la co-combustion de combustible dérivé de déchets [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Vekemans, O., Laviolette, J.-P., & Chaouki, J. (2015). Thermal behavior of an engineered fuel and its constituents for a large range of heating rates with emphasis on heat transfer limitations. Thermochimica Acta, 601, 54-62. Lien externe
Vidal, D., Matte-Deschênes, G., Bertrand, F., & Hayes, R. E. (septembre 2015). Simulation of the Impact of Thermophoresis on the Capture Efficiency of Diesel Particulate Filters [Communication écrite]. 4th International Symposium on Modeling of Exhaust-Gas After-Treatment (MODEGAT 2015), Karlsruhe, Germany. Non disponible
Virgilio, N. (mai 2015). Melt-processed cocontinuous polymer blends: versatile materials to prepare porous polymers [Présentation]. Dans Industrial Partnership for Research in Interfacial Materials and Engineering (IPrime) Annual Meeting, Minneapolis, Minnesota. Non disponible
Virgilio, N. (mai 2015). Science and engineering of polymer interfaces [Présentation]. Dans Network for Innovative Plastic Materials and Manufacturing Processes (NIPMMP) Annual Meeting, Montréal, Québec. Non disponible
Vu, T. T. D., Patel, J., Mighri, F., Do, T.-O., & Ajji, A. (2015). The effect of TiO₂ surface modification on the photovoltaic properties of hybrid bulk heterojunction solar cells based on MEH-PPV/CdS/TiO₂ active layer. Green Processing and Synthesis, 4(2), 79-90. Disponible
Wang, C., Natale, G., Virgilio, N., & Heuzey, M.-C. (avril 2015). Enhanced gelling properties of gelatin and xanthan gum mixtures due to synergistic interactions [Présentation]. Dans 10th Annual European Rheology Conference (AERC 2015), Nantes, France. Non disponible
Wang, C., Natale, G., Virgilio, N., & Heuzey, M.-C. (octobre 2015). Enhanced gelling properties of gelatin and xanthan mixtures due to synergistic interactions [Présentation]. Dans Society of Rheology 87th Annual Meeting, Baltimore, Maryland. Non disponible
Wang, C., Virgilio, N., & Heuzey, M.-C. (janvier 2015). Enhanced gelling properties of gelatin and xanthan gum mixtures due to synergistic interactions [Présentation]. Dans Polytechnique/McGill Chemical Engineering Research Day, Montréal, Québec. Non disponible
Wang, J., Chartrand, P., & Jung, I.-H. (2015). Thermodynamic description of the Ag-(Ca, Li, Zn) and Ca-(In, Li) binary systems. CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry, 50, 68-81. Lien externe
Wang, J., Zhang, Y.-N., Hudon, P., Chartrand, P., Jung, I.-H., & Medraj, M. (2015). Experimental determination of the phase equilibria in the Mg-Zn-Sr ternary system. Journal of Materials Science, 50(23), 7636-7646. Lien externe
Wang, J., Zhang, Y.-N., Hudon, P., Jung, I.-H., Chartrand, P., & Medraj, M. (2015). Experimental study of the crystal structure of the Mg₁₅-xZnxSr₃ ternary solid solution in the Mg-Zn-Sr system at 300 degrees C. Materials & Design, 86, 305-312. Lien externe
Wang, J., Zhang, Y.-N., Hudon, P., Jung, I.-H., Medraj, M., & Chartrand, P. (2015). Experimental study of the phase equilibria in the Mg-Zn-Ag ternary system at 300 °C. Journal of Alloys and Compounds, 639, 593-601. Lien externe
Wang, K., Fei, Z., Wang, J., Wu, Z., Li, C., & Xie, L. (2015). Thermodynamic description of the AgCl-CoCl₂-InCl₃-KCl system. Materials Chemistry and Physics, 163, 73-87. Lien externe
Wang, S., Saffar, A., Ajji, A., Wu, H., & Guo, S.-Y. (2015). Fabrication of microporous membranes from melt extruded polypropylene precursor films via stretching: Effect of annealing. Chinese Journal of Polymer Science, 33(7), 1028-1037. Lien externe
Wünsche, J., Deng, Y., Kumar, P., Di Mauro, E., Josberger, E., Sayago, J., Pezzella, A., Soavi, F., Cicoira, F., Rolandi, M., & Santato, C. (2015). Protonic and electronic transport in hydrated thin films of the pigment eumelanin. Chemistry of Materials, 27(2), 436-442. Lien externe
Yi, Z., Natale, G., Kumar, P., Di Mauro, E., Heuzey, M.-C., Soavi, F., Perepichka, I. I., Varshney, S. K., Santato, C., & Cicoira, F. (2015). Ionic liquid-water mixtures and ion gels as electrolytes for organic electrochemical transistors. Journal of Materials Chemistry C, 3(25), 6549-6553. Lien externe
Yousefzadeh Tabasi, R. (2015). Study of Self-Adhesion and Biodegradation of Biodegradable Polymer Films [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Zhang, S., Kumar, P., Nouas, A. S., Fontaine, L., Tang, H., & Cicoira, F. (2015). Solvent-induced changes in PEDOT:PSS films for organic electrochemical transistors. APL Materials, 3(1), 014911 (7 pages). Disponible
Zhu, Z. (2015). Experimental and Thermodynamic Investigation of RE-Mg-Zn (RE=Sc, Y, La, Ce, Pr, Nd, Pm, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb and Lu) Systems [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Zhu, Z., & Pelton, A. (2015). Critical assessment and optimization of phase diagrams and thermodynamic properties of RE-Zn systems-part I: Sc-Zn, La-Zn, Ce-Zn, Pr-Zn, Nd-Zn, Pm-Zn and Sm-Zn. Journal of Alloys and Compounds, 641, 249-260. Lien externe
Zhu, Z., & Pelton, A. (2015). Critical assessment and optimization of phase diagrams and thermodynamic properties of RE-Zn systems. Part II, Y-Zn, Eu-Zn, Gd-Zn, Tb-Zn, Dy-Zn, Ho-Zn, Er-Zn, Tm-Zn, Yb-Zn and Lu-Zn. Journal of Alloys and Compounds, 641, 261-271. Lien externe
Zhu, Z., & Pelton, A. (2015). Thermodynamic modeling of the La-Mg-Zn, Pr-Mg-Zn and Sm-Mg-Zn system. Journal of Alloys and Compounds, 652, 415-425. Lien externe
Zhu, Z., & Pelton, A. (2015). Thermodynamic modeling of the Y-Mg-Zn, Gd-Mg-Zn, Tb-Mg-Zn, Dy-Mg-Zn, Ho-Mg-Zn, Er-Mg-Zn, Tm-Mg-Zn and Lu-Mg-Zn systems. Journal of Alloys and Compounds, 652, 426-443. Lien externe
