 | Monter d'un niveau |
Ben-Youssef, Y., Kerboua, Y., & Lakis, A. (2022). Analysis of nonlinear vibrations of thin cylindrical shells subjected to supersonic flow. Thin-Walled Structures, 173, 108969 (17 pages). Lien externe
Ben-Youssef, Y., Kerboua, Y., & Lakis, A. (2021). An Analytical Approach for the Nonlinear Free Vibration Analysis of Thin-Walled Circular Cylindrical Shells. International Journal of Structural Stability and Dynamics, 21(12). Lien externe
Bahrami-Torabi, H., Kerboua, Y., & Lakis, A. (2021). Finite element model to investigate the dynamic instability of rectangular plates subjected to supersonic airflow. Journal of Fluids and Structures, 103, 13 pages. Lien externe
Ben-Youssef, Y., Kerboua, Y., & Lakis, A. (2021). Numerical modeling of initial stress stiffening effect on the dynamic behavior of axisymmetric shells. Journal of Pressure Vessel Technology, Transactions of the ASME, 143(5), 20 pages. Lien externe
Ben Youssef, Y., Lakis, A., & Kerboua, Y. (2020). Développement d'une formulation pour l'étude du comportement dynamique non linéaire des coques cylindriques isotropes. (Rapport technique n° EPM-RT-2020-01). Disponible
Bakhtiari, M., Lakis, A., & Kerboua, Y. (2020). Nonlinear supersonic flutter of truncated conical shells. Journal of Mechanical Science and Technology, 34(4), 1375-1388. Lien externe
Bakhtiari, M., Lakis, A., & Kerboua, Y. (2020). Nonlinear Vibration of Truncated Conical Shells: Donnell, Sanders and Nemeth Theories. International Journal of Nonlinear Sciences and Numerical Simulation, 21(1), 83-97. Lien externe
Lakis, A., Jalali, A. R., & Toorani, M. (2019). Coupled fluid-structure dynamics of composite plates. International Journal of Numerical Methods and Applications, 18(2), 43-88. Lien externe
Bakhtiari, M., Lakis, A., & Kerboua, Y. (2019). Derivatives of fourth order Kronecker power systems with applications in nonlinear elasticity. Applied Mathematics and Computation, 362(362), 14 pages. Lien externe
Bakhtiari, M., Lakis, A., & Kerboua, Y. (2018). Nonlinear vibration of truncated conical shells : Donnell, Sanders and Nemeth theories. (Rapport technique n° EPM-RT-2018-01). Disponible
Lakis, A., Mahvash, A., & Toorani, M. (juillet 2018). Diagnosis of bearing faults in complex machinery using spatial distribution of sensors and Fourier transforms [Communication écrite]. 6th International Conference on Integrity-Reliability-Failure (IRF 2018), Lisbon, Portugal. Lien externe
Lakis, A., & Oulmane, A. (2018). Nonuniform shell/flow vibration analysis for a nuclear plant. European Journal of Mathematics and Computer Science, 5(1), 93-145. Lien externe
Lakis, A., Kerboua, Y., & Tourani, M. (juin 2017). Aeroelastic analysis of combined conical-cylindrical shells [Communication écrite]. 7th International Conference on Mechanics and Materials in Design (M2D 2017), Albufeira, Portugal. Lien externe
Lakis, A., & Trinh, N. D. (2017). Liquid phase velocity in turbulent flow of a water/dispersed bubble mixture in large diameter horizontal pipes. European Journal of Engineering and Technology, 5(1), 62-89. Lien externe
Lakis, A., Sabri, F., & Toorani, M. (juillet 2017). A semi-analytical method in supersonic flutter analysis of fluid-filled truncated conical shells [Communication écrite]. International Conference on Structural Engineering Dynamics (ICEDyn 2017), Ericeira, Portugal. Non disponible
Oulmane, A., Lakis, A., & Mureithi, N. (2016). Automatic fault diagnosis of rotating machinery. European Journal of Mechanical Engineering Research, 3(2), 19-41. Lien externe
Iliescu, L. E., Lakis, A., & Oulmane, A. (2016). Hypervelocity impact (HVI) signal analysis. European Journal of Engineering and Technology, 4(1), 66-93. Lien externe
Mahvash, A., & Lakis, A. (2016). Independent component analysis as applied to vibration source separation and fault diagnosis. Journal of Vibration and Control, 22(6), 1682-1692. Lien externe
Kerboua, Y., & Lakis, A. (2016). Numerical model to analyze the aerodynamic behavior of a combined conicalcylindrical shell. Aerospace Science and Technology, 58, 601-617. Lien externe
Iliescu, L. E., Lakis, A., & Oulmane, A. (2016). Satellites-spacecraft materials and hypervelocity impact (HVI) testing: numerical simulations. European Journal of Mechanical Engineering Research, 3(3), 41-77. Lien externe
Lakis, A., & Trinh, N. D. (2016). Void fraction in highly turbulent and large diameter horizontal pipe flow. European Journal of Engineering and Technology, 4(2), 55-77. Lien externe
Mahvash, A., & Lakis, A. (2015). Application of cyclic spectral analysis in diagnosis of bearing faults in complex machinery. Tribology Transactions, 58(6), 1151-1158. Lien externe
Menaa, M., & Lakis, A. (2015). Dynamic analysis of spherical shell partially filled with fluid. Computers & Fluids, 108, 67-78. Lien externe
Lakis, A., Sabri, F., & Toorani, M. (juin 2015). Dynamic stability analysis of partially liquid-filled cylindrical shells [Communication écrite]. International Conference on Structural Engineering Dynamics (ICEDyn 2015), Lagos, Portugal. Non disponible
Lakis, A., & Toorani, M. (juin 2015). Fluid-structure interaction analysis of composite shell structures [Communication écrite]. 18th International Conference on Composite Structures (ICCS 2015), Lisbon, Portugal. Non disponible
Menaa, M., & Lakis, A. (2015). Free Vibration of Spherical Shells Using a Hybrid Finite Element Method. International Journal of Structural Stability and Dynamics, 15(4), 1450062 (29 pages). Lien externe
Lakis, A., Sabri, F., Kerboua, Y., Esmailzadeh, M., & Toorani, M. (octobre 2015). Hybrid finite element method in aeroelastic analysis of shell-type structures [Communication écrite]. 7th European Aeronautics Days 2015 (Aerodays 2015), London, UK. Non disponible
Lakis, A., Hosseini, S. M. S., Toorani, M., & Sassi, S. (juillet 2015). Pulsed eddy current and time-frequency analysis in detecting the corrosion distribution in a multilayer aluminum plate [Communication écrite]. 6th International Conference on Mechanics and Materials in Design (M2D2015), Ponta Delgada, Portugal. Non disponible
Menaa, M., & Lakis, A. (2014). Supersonic flutter of a spherical shell partially filled with fluid. American Journal of Computational Mathematics, 4(3), 153-182. Disponible
Lakis, A., Menna, M., & Toorani, M. (juillet 2014). Aeroelastic analysis of spherical shells [Communication écrite]. 5th European Conference and 11th World Congress on Computational Mechanics (ECCM/WCCM 2014), Barcelona, Spain. Lien externe
Oulmane, A., Lakis, A., & Mureithi, N. (2014). Application of Fourier descriptors & artificial neural network to bearing vibration signals for fault detection & classification. Universal Journal of Aeronautical & Aerospace Sciences, 2, 37-54. Lien externe
Kerboua, Y., & Lakis, A. (2014). Dynamic behaviour of a rocket filled with liquid. Universal Journal of Aeronautical & Aerospace Sciences, 2, 55-79. Lien externe
Sabri, F., & Lakis, A. (2014). Efficient hybrid finite element method for flutter prediction of functionally graded cylindrical shells. Journal of Vibration and Acoustics, 136(1). Lien externe
Mortada, M.-A., Yacout, S., & Lakis, A. (2014). Fault diagnosis in power transformers using multi-class logical analysis of data. Journal of Intelligent Manufacturing, 25(6), 1429-1439. Lien externe
Iliescu, L. E., Lakis, A., & Abou-Antoun, A. (2014). Hypervelocity impact (HVI) tests & signal recordings. Universal Journal of Aeronautical & Aerospace Sciences, 2, 80-113. Lien externe
Lakis, A., Ramzi, R., & Toorani, M. (juin 2014). Non-linear dynamic analysis of cylindrical shells subjected to a supersonic flow [Communication écrite]. 7th Chaotic Modeling and Simulation International Conference (CHAOS 2014), Lisbon, Portugal. Non disponible
Menaa, M., & Lakis, A. (2014). Numerical investigation of the flutter of a spherical shell. Journal of Vibration and Acoustics, 136(2), 16 pages. Lien externe
Menaa, M., & Lakis, A. (2013). Hybrid finite element method applied to the analysis of free vibration of a spherical shell filled with fluid. (Rapport technique n° EPM-RT-2013-04). Disponible
Menaa, M., & Lakis, A. (2013). Hybrid finite element method applied to the analysis of free vibration of spherical shell. (Rapport technique n° EPM-RT-2013-02). Disponible
Lakis, A., Mahvash, A., & Toorani, M. (juin 2013). Development of intelligent health monitoring systems for rotating machinery and structural components [Communication écrite]. 4th International Conference on Integrity, Reliability & Failure, Funchal, Portugal. Non disponible
Lakis, A., Esmailzadeh, M., & Toorani, M. (juin 2013). Dynamic response on an open curved thin shell to random pressure field arising from a turbulent boundary layer [Communication écrite]. International Conference on Structural Engineering Dynamics (ICEDyn 2013), Sesimba, Portugal. Non disponible
Ramzi, R., & Lakis, A. (2013). Effect of geometric and fluid flow nonlinearities on cylindrical shells subjected to a supersonic flow. International Journal of Numerical Methods and Applications, 9(1), 1-37. Lien externe
Ramzi, R., & Lakis, A. (2013). Effect of geometric nonlinearities on nonlinear vibrations of closed cylindrical shells. International Journal of Structural Stability and Dynamics, 13(4). Lien externe
Oulmane, A., Lakis, A., & Mureithi, N. (2013). A method for analyzing rotating machinery faults using time-frequency application. International Journal of Condition Monitoring and Diagnostic Engineering Management, 16(2), 21-34. Lien externe
Sabri, F., & Lakis, A. (juillet 2012). Aeroelastic analysis of truncated conical shell subjected to supersonic flow [Communication écrite]. 15th International Conference on Experimental Mechanics (ICEM 2012), Porto, Portugal. Non disponible
Hosseini, S., & Lakis, A. (2012). Application of time-frequency analysis for automatic hidden corrosion detection in a multilayer aluminum structure using pulsed eddy current. NDT & E International, 47, 70-79. Lien externe
Oulmane, A., Lakis, A., & Mureithi, N. (juillet 2012). Automatic classification of rotating machinery faults using Fourier descriptors and neural networks [Communication écrite]. 15th International Conference on Experimental Mechanics, Porto, Portugal. Non disponible
Lakis, A., & Toorani, M. (mai 2012). Dynamic analysis of composite shell structures subjected to fluid forces [Communication écrite]. 1st International Conference on Composites Dynamics, Arcachon, France. Non disponible
Lakis, A., Toorani, M., Kerboua, Y., Esmailzadeh, M., & Sabri, F. (juillet 2012). Dynamic analysis of fluid-shell structures [Communication écrite]. 15th International Conference on Experimental Mechanics, Porto, Portugal. Non disponible
Sabri, F., Meguid, S. A., & Lakis, A. (avril 2012). Modeling flutter response of a flexible morphing wing for UAV [Communication écrite]. 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Honolulu, HI, USA. Lien externe
Esmailzadeh, M., & Lakis, A. (juillet 2012). Random vibration prediction of a curved thin shell subjected to turbulent pressure boundary-layer induced pressure field [Communication écrite]. 15th International Conference on Experimental Mechanics, Porto, Portugal. Non disponible
Esmailzadeh, M., & Lakis, A. (2012). Response of an open curved thin shell to a random pressure field arising from a turbulent boundary layer. Journal of Sound and Vibration, 331(2), 345-364. Lien externe
Mortada, M.-A., Carroll, T. I.I.I., Yacout, S., & Lakis, A. (2012). Rogue components: Their effect and control using logical analysis of data. Journal of Intelligent Manufacturing, 23(2), 289-302. Lien externe
Sabri, F., Meguid, S. A., Lakis, A., & Tan, K. (juin 2011). Aeroelastic behavior of a novel morphing wing using shape memory alloys [Communication écrite]. 15th International Forum on Aeroelasticity and Structural Dynamics (IFASD 2011), Paris, France. Non disponible
Mortada, M. A., Yacout, S., & Lakis, A. (mars 2011). CBMLAD : Using logical analysis of data in condition based maintenance [Communication écrite]. International Conference on Systems Engineering and Modeling (ICSEM 2011), Shanghai, China. Non disponible
Mortada, M.-A., Yacout, S., & Lakis, A. (2011). Diagnosis of rotor bearings using logical analysis of data. Journal of Quality in Maintenance Engineering, 17(4), 371-397. Lien externe
Redouane, R., & Lakis, A. (juillet 2011). Dynamic behavior of cylindrical shells subjected to nonlinearities of fluid flow [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2011), Baltimore, Maryland. Non disponible
Sabri, F., & Lakis, A. (2011). Effects of sloshing on flutter prediction of partially liquid-filled circular cylindrical shell. Journal of Aircraft, 48(6), 1829-1839. Lien externe
Sabri, F., & Lakis, A. (2011). Hydroelastic vibration of partially liquid-filled circular cylindrical shells under combined internal pressure and axial compression. Aerospace Science and Technology, 15(4), 237-248. Lien externe
Mahvash, A., & Lakis, A. (2011). A novel approach to evaluation of vibration source separation based on spatial distribution of sensors and Fourier transforms. Journal of Dynamic Systems, Measurement and Control, 133(6), 9 pages. Lien externe
Vu, V. H., Thomas, M., Lakis, A., & Marcouiller, L. (2011). Operational modal analysis by updating autoregressive model. Mechanical Systems and Signal Processing, 25(3), 1028-1044. Lien externe
Vu, V. H., Thomas, M., Lakis, A., & Marcouiller, L. (2011). Spectrum and operational modal analysis with vector autoregressive models. Dans Mechanical Vibrations: Types, Testing and Analysis (57-93). Non disponible
Lakis, A., Toorani, M. H., Kerboua, Y., Esmailzadeh, M., & Sabri, F. (2011). Theory, analysis and design of fluid-shell structures. Structural Longevity, 6(3), 155-185. Lien externe
Lakis, A., Toorani, M. H., Kerboua, Y., Esmailzadeh, M., & Sabri, F. (avril 2011). Theory, analysis, and design of fluid-shell structures [Communication écrite]. 11th International Conference on Computational & Experimental Engineering & Sciences, Nanjing, China. Non disponible
Sabri, F., & Lakis, A. (août 2010). Aerothermoelastic stability of functionally graded circular cylindrical shells [Communication écrite]. 3rd ASME Joint US-European Fluids Engineering Summer Meeting, collocated with 8th International Conference on Nanochannels, Microchannels and Minichannels, Montréal, Québec. Lien externe
Mahvash, A., & Lakis, A. (juin 2010). Application of multi-sensor data acquisition and fourier transform in separation of vibration sources [Communication écrite]. 23rd International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2010), Nara, Japan. Non disponible
Komgom, N. C., Mureithi, N., & Lakis, A. (2010). Application of pattern analysis to condition monitoring of bearing. (Rapport technique). Non disponible
Hosseini, S., & Lakis, A. (octobre 2010). Application of time-frequency analysis for automatic thickness detection in aluminum structure using pulsed eddy current [Communication écrite]. Annual Seminar of the Canadian Machine Virbration Association, Québec City, Canada. Non disponible
Toorani, M. H., Lakis, A., & Bursuc, G. (août 2010). Dynamic analysis of cylindrical shells subjected to flowing fluid and fluid surface effect [Communication écrite]. 7th International Symposium on Fluid-Structure Interactions, Flow-Sound Interactions and Flow-Induced Vibration & Noise, Montréal, Québec. Non disponible
Ramzi, R., & Lakis, A. (août 2010). Effects of fluid flow nonlinearities on the dynamic behaviour of cylindrical shells subjected to a supersonic flow [Communication écrite]. 3rd Joint US-European Fluids Engineering Summer Meeting and 8th International Conference on Nanochannels, Microchannels and Minichannels, Montréal, Québec. Lien externe
Sabri, F., & Lakis, A. (avril 2010). Effects of sloshing on flutter prediction of partially liquid filled circular cylindrical shell [Communication écrite]. 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Orlando, FL, United states. Lien externe
Sabri, F., & Lakis, A. (2010). Finite element method applied to supersonic flutter of circular cylindrical shells. AIAA Journal, 48(1), 73-81. Lien externe
Komgom, N. C., Mureithi, N., & Lakis, A. (octobre 2010). High speed bearing fault diagnostic using spectral kurtosis and support vector machine [Communication écrite]. Annual Seminar of the Canadian Machine Virbration Association, Québec City, Canada. Non disponible
Sabri, F., & Lakis, A. (2010). Hybrid finite element method applied to supersonic flutter of an empty or partially liquid-filled truncated conical shell. Journal of Sound and Vibration, 329(3), 302-316. Lien externe
Oulmane, A., Lakis, A., & Mureithi, N. (2010). Monitoring of bearing PW100 #5 tested at National Research Center in Ottawa. (Rapport technique). Non disponible
Esmailzadeh, M., & Lakis, A. (août 2010). Turbulence-induced vibration analysis of an open curved thin shell [Communication écrite]. 3rd Joint US-European Fluids Engineering Summer Meeting and 8th International Conference on Nanochannels, Microchannels and Minichannels, Montréal, Québec. Lien externe
Kerboua, Y., Lakis, A., & Hmila, M. (2010). Vibration analysis of truncated conical shells subjected to flowing fluid. Applied Mathematical Modelling, 34(3), 791-809. Lien externe
Esmailzadeh, M., & Lakis, A. (2009). Prediction of the response of a thin structure subjected to a turbulent boundary-layer-induced random pressure field. (Rapport technique n° EPM-RT-2009-06). Disponible
Oulmane, A., Lakis, A., Mureithi, N., & Safizadeh, M. S. (juin 2009). The application of time-frequency analysis in rotating machinery fault diagnostic [Communication écrite]. 22nd International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2009), San Sebastian, Spain. Non disponible
Lakis, A., & Toorani, M. H. (juillet 2009). Application of time-frequency method in fault diagnosis of rotating machinery [Communication écrite]. 3rd International Conference on Integrity, Reliability & Failure, Porto, Portugal. Non disponible
Kerboua, Y., Lakis, A., Thomas, M., Marcouiller, L., & Toorani, M. H. (juillet 2009). Critical velocity of potential flow in interaction with a system of plates [Communication écrite]. 17th International Conference on Nuclear Engineering (ICONE 2009), Brussels, Belgium. Lien externe
Mahvash, A., Oulmane, A., & Lakis, A. (juin 2009). Development of an intelligent health monitoring system for rotating machinery and structural components [Communication écrite]. CANEUS Fly-by-Wireless Workshop (FBW 2009), Montréal, Québec. Non disponible
Badri, B., Thomas, M., Sassi, S., Zaghbani, I., Songméné, V., Lakis, A., & Mureithi, N. (mai 2009). Étude du comportement des roulements dans les rotors tournant à haute vitesse [Communication écrite]. 2e congrès international sur l'ingénierie des risques industriels (CIRI 2009), Reims, France (15 pages). Non disponible
Kerboua, Y., Lakis, A., Thomas, M., Marcouiller, L., & Toorani, M. H. (septembre 2009). Hybrid element in fluid-structure interaction of plates and shells [Communication écrite]. 12th International Conference on Civil, Structural and Environmental Engineering, Madeira, Portugal. Non disponible
Sabri, F., Lakis, A., & Toorani, M. H. (septembre 2009). Hybrid finite element method in supersonic flutter analysis of circular cylindrical shells [Communication écrite]. 31st International Conference on Boundary Elements and Other Mesh Reduction Methods (BEM/MRM 2009), New Forest, United kingdom. Lien externe
Ouahabi, A., Thomas, M., & Lakis, A. (mai 2009). Hybrid monitoring of crack location in riveted plates by combining an experimental modal analysis with numerical models [Communication écrite]. 2e congrès international sur l'ingénierie des risques industriels (CIRI 2009), Reims, France. Non disponible
Sabri, F., & Lakis, A. (mai 2009). Hydroelastic vibration of partially liquid-filled circular cylindrical shells under combined internal pressure and axial compression [Communication écrite]. 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Palm Springs, California. Lien externe
Sghir, K. A., El Badaoui, M., Thomas, M., Zaghbani, I., Songméné, V., Lakis, A., & Mureithi, N. (mai 2009). Identification aveugle paramétrique de la fonction de réponse impulsionnelle basée sur la cyclostationnarité de second ordre à partir des réponses seulement [Communication écrite]. 2e congrès international sur l'ingénierie des risques industriels (CIRI 2009), Reims, France. Non disponible
Badri, B., Thomas, M., Sassi, S., Zaghbani, I., Songméné, V., Lakis, A., & Mureithi, N. (octobre 2009). Instabilité des fraiseuses opérant à haute vitesse, provoquée par l'intéraction des défauts de roulements avec les résonances [Communication écrite]. 27th Seminar on Machinery Vibration (CMVA 2009), Vancouver, B.C.. Lien externe
Vu, V. H., Thomas, M., Lakis, A., & Marcouiller, L. (mai 2009). Online monitoring of varying modal parameters by operating modal analysis and model updating [Communication écrite]. 2nd International Conference on Industrial Risk Engineering (CIRI 2009), Reims, France (19 pages). Lien externe
Vu, V. H., Thomas, M., Lakis, A., & Marcouiller, L. (juillet 2009). Operational modal analysis by short time autoregressive modeling [Communication écrite]. 3rd International Conference on Integrity, Reliability & Failure (IRF 2009), Porto, Portugal. Non disponible
Esmailzadeh, M., Lakis, A., Thomas, M., & Marcouiller, L. (2009). Prediction of the response of a thin structure subjected to a turbulent boundary-layer-induced random pressure field. Journal of Sound and Vibration, 328(1-2), 109-128. Lien externe
Esteve, A., Badri, B., Zagbani, I., Thomas, M., & Lakis, A. (2009). Les problèmes de vibration en UHV. (Rapport technique). Non disponible
Palaisi, D., Guibault, R., Thomas, M., Lakis, A., & Mureithi, N. (octobre 2009). Simulations numériques du comportement vibratoire d'engrenages endommagés [Numerical simulations of damaged gear vibrations]. [Communication écrite]. 27th Seminar on Machinery Vibration (CMVA 2009), Vancouver, B.C.. Lien externe
Lakis, A., Bursuc, G., & Toorani, M. H. (2009). Sloshing effect on the dynamic behavior of horizontal cylindrical shells. Nuclear Engineering and Design, 239(7), 1193-1206. Lien externe
Vu, V. H., Thomas, M., Lakis, A., & Marcouiller, L. (octobre 2009). Software for operational modal analysis and automatic identification of modal parameters [Communication écrite]. 27th Seminar on Machinery Vibration (CMVA 2009), Vancouver, B.C. (16 pages). Lien externe
Sabri, F., & Lakis, A. (juin 2009). Supersonic flutter of empty and partially liquid-filled circular cylindrical shells [Communication écrite]. 14th International Forum on Aeroelasticity and Structural Dynamics, Seattle, WA. Non disponible
Maillot, A., Vu Viet, H., Lakis, A., & Marcouiller, L. (2008). Analyse modale d'une aube dans l'eau. (Rapport technique). Non disponible
Komgom, N. C., Mureithi, N., & Lakis, A. (juillet 2008). Application of time synchronous averaging, spectral kurtosis and support vector machines for bearing fault identification [Communication écrite]. ASME Pressure Vessels & Piping Conference (PVP 2008), Chicago, IL. Lien externe
Safizadeh, M. S., Lakis, A., & Oulmane, A. (juin 2008). Application of time-frequency analysis to signals from high speed bearing [Communication écrite]. 21st International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2008), Prague, Czech Republic. Non disponible
Kerboua, Y., Lakis, A., Thomas, M., & Marcouiller, L. (2008). Computational Modeling of Coupled Fluid-Structure Systems With Applications. Structural Engineering and Mechanics, 29(1), 91-111. Lien externe
Safizadeh, M. S., Lakis, A., & Toorani, M. H. (juillet 2008). Detection and classification of hidden corrosion using intelligent pulsed eddy current technique [Communication écrite]. 1er Colloque Québec-Aquitaine, Bordeaux, France. Non disponible
Kerboua, Y., Lakis, A., Thomas, M., & Marcouiller, L. (2008). Modelling of plates subjected to flowing fluid under various boundary conditions. Engineering Applications of Computational Fluid Mechanics, 2(4), 525-539. Lien externe
Bouzidane, A., Thomas, M., & Lakis, A. (2008). Nonlinear dynamic behavior of a rigid rotor supported by hydrostatic squeeze film dampers. Journal of Tribology, 130(4). Lien externe
Païdoussis, M. P., Lakis, A., & Karagiozis, K. N. (juin 2008). Nonlinear vibrations on empty and fluid clamped shells of different materials [Communication écrite]. 9th International Conference on Flow-Induced Vibrations (FIV 2008), Prague, Czech Republic. Non disponible
Sghir, K. A., Thomas, M., Lakis, A., & Mureithi, N. (2008). Signaux d'une fraiseuse haute vitesse. (Rapport technique). Non disponible
Komgom, N. C., Lakis, A., & Mureithi, N. (2008). Spécifications techniques du Laboratoire pour le projet CRIAQ 1.18. (Rapport technique). Non disponible
Sabri, F., & Lakis, A. (décembre 2008). Supersonic flutter of partially liquid-filled circular cylindrical shells subjected to internal pressure and axial compression [Communication écrite]. 4th WSEAS International Conference on Applied and Theoretical Mechanics (MECHANICS 2008), Cairo, Egypt. Lien externe
Komgom, N. C., & Lakis, A. (2008). Technical requirements for bearing tests at Pratt & Whitney. (Rapport technique). Non disponible
Esmailzadeh, M., Lakis, A., Thomas, M., & Marcouiller, L. (2008). Three-dimensional modeling of curved structures containing and/or submerged in fluid. Finite Elements in Analysis and Design, 44(6-7), 334-345. Lien externe
Sassi, S., Badri, B., Thomas, M., & Lakis, A. (juin 2008). Tracking surface degradation of ball bearing by means of new time domain scalar indicators [Communication écrite]. 21st International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2008), Prague, Czech Republic (12 pages). Non disponible
Kerboua, Y., Lakis, A., Thomas, M., & Marcouiller, L. (2008). Vibration analysis of rectangular plates coupled with fluid. Applied Mathematical Modelling, 32(12), 2570-2586. Lien externe
Badri, B., Thomas, M., Lakis, A., & Mureithi, N. (2008). Les vibrations en UHV. (Rapport technique). Non disponible
Komgom, N. C., Mureithi, N., Lakis, A., & Safizadeh, M. S. (2007). Analyse des signatures vibratoires de l'Ecospeed. (Rapport technique). Non disponible
Komgom, N. C., Mureithi, N., Lakis, A., & Thomas, M. (octobre 2007). Bearing fault detection using pattern recognition methods applied to the Case Western Reserve University bearing data [Communication écrite]. 25th Seminar on Machinery Vibration (CMVA 2007), St. John, New Brunswick. Non disponible
Badri, B., Thomas, M., Sassi, S., & Lakis, A. (juin 2007). Combination of bearing defect simulator and artificial neural network for the diagnosis of damaged bearings [Communication écrite]. 20th International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2007), Faro, Portugal. Non disponible
Ruban, T., Vu Viet, H., Thomas, M., Lakis, A., & Marcouiller, L. (2007). Conception des structures d'essais d'interaction fluide-structure. (Rapport technique). Non disponible
Komgom, N. C., Mureithi, N., Roussier, B., & Lakis, A. (2007). Design of the experimental test rig for the analysis of vibration response of rotating machinery components. (Rapport technique). Non disponible
Kerboua, Y., Lakis, A., Thomas, M., Marcouiller, L., & Toorani, M. H. (2007). Dynamic analysis of coupled-fluid structure systems. WSEAS Transactions on Applied and Theoretical Mechanics, 1(2), 265-274. Non disponible
Kerboua, Y., Lakis, A., Thomas, M., Marcouiller, L., & Toorani, M. H. (juin 2007). Dynamic analysis of coupled-fluid structure systems [Communication écrite]. 20th International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2007), Faro, Portugal. Non disponible
Kerboua, Y., & Lakis, A. (décembre 2007). Dynamical behavior of plates subjected to a flowing fluid [Communication écrite]. 3rd WSEAS International Conference on Applied and Theoretical Mechanics (MECHANICS 2007), Canary Islands, Spain. Lien externe
Vu, V. H., Thomas, M., Lakis, A., & Marcouiller, L. (octobre 2007). Effects of added mass on submerged vibrating structures [Communication écrite]. 25th Seminar on Machinery Vibration (CMVA 2007), St. John, New Brunswick (9 pages). Lien externe
Lakis, A., Brusuc, G., & Toorani, M. (mai 2007). Fluid free surface effect on the vibration analysis of cylindrical shells [Communication écrite]. International Congress on Advances in Nuclear Power Plants (ICAPP 2007), Nice, France. Non disponible
Kerboua, Y., Lakis, A., Thomas, M., & Marcouiller, L. (2007). Hybrid Method for Vibration Analysis of Rectangular Plates. Nuclear Engineering and Design, 237(8), 791-801. Lien externe
Vu, V. H., Thomas, M., Lakis, A., & Marcouiller, L. (avril 2007). Identification of modal parameters by operational modal analysis for the assessment of bridge rehabilitation [Communication écrite]. 2nd International Operational Modal Analysis Conference (IOMAC 2007), Copenhagen, Danemark. Lien externe
Safizadeh, M. S., Lakis, A., & Thomas, M. (juin 2007). Machinery diagnosis by wavelet analysis [Communication écrite]. 20th International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2007), Faro, Portugal. Non disponible
Vu, V. H., Thomas, M., Lakis, A., & Marcouiller, L. (octobre 2007). Multi-regressive model for structural output only modal analysis [Communication écrite]. 25th Seminar on Machinery Vibration (CMVA 2007), St. John, New Brunswick. Lien externe
Toorani, M. H., & Lakis, A. (mai 2007). Non-linear flow-induced vibrations in composite cylindrical shells [Communication écrite]. 15th Annual Conference on Mechanical Engineering (ISME 2007), Tehran, Iran. Non disponible
Komgom, N. C., Mureithi, N., Lakis, A., & Thomas, M. (décembre 2007). On the use of time synchronous averaging, independent component analysis and support vector machines for bearing fault diagnosis [Communication écrite]. 1er Congrès international sur l'ingénierie des risques industriels (CIRI 2007), Montréal, Québec. Lien externe
Vu, V. H., Thomas, M., & Lakis, A. (avril 2007). Le pont est-il fort? Réponse d'une technique d'analyse modale opérationnelle [Communication écrite]. 42e Congrès de l'AQTR, défi transport durable, Montréal, Québec (17 pages). Non disponible
Badri, B., Thomas, M., Archambault, R., Sassi, S., & Lakis, A. (juin 2007). Rapid Julien transform: A new method for shock detection and time-domain classification [Communication écrite]. 20th International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2007), Faro, Portugal. Non disponible
Lakis, A. (novembre 2007). Rotating machinery fault diagnosis using time-frequency methods [Communication écrite]. 7th WSEAS International Conference on Electric Power Systems, High Voltages, Electric Machines, Venice, Italy. Lien externe
Badri, B., Thomas, M., Sassi, S., Archambault, R., Lakis, A., & Mureithi, N. (octobre 2007). The shock extractor [Communication écrite]. 25th Seminar on Machinery Vibration (CMVA 2007), St. John, New Brunswick (11 pages). Lien externe
Vu, V. H., Thomas, M., Lakis, A., & Marcouiller, L. (décembre 2007). A time domain method for modal identification of vibratory signals [Communication écrite]. 1er Congrès international sur l'ingénierie des risques industriels (CIRI 2007), Montréal, Québec. Non disponible
Komgom, N. C., Mureithi, N., Lakis, A., & Thomas, M. (décembre 2007). Time synchronous analysis and pattern recognition methods for bearing fault detection [Communication écrite]. 1er Congrès international sur l'ingénierie des risques industriels (CIRI 2007), Montréal, Québec. Non disponible
Badri, B., Thomas, M., Archambault, R., Sassi, S., Lakis, A., & Mureithi, N. (décembre 2007). Une nouvelle méthode pour différentier les signaux de chocs synchrones et asynchrones [A new method to detect synchronous and asynchronous shock data in a signal]. [Communication écrite]. 1er Congrès international sur l'ingénierie des risques industriels (CIRI 2007), Montréal, Québec. Non disponible
Esmailzadeh, M., Lakis, A., Thomas, M., & Marcouiller, L. (2006). Three-dimensional modeling of curved structures partially or completely containing and/or submerged in fluid. (Rapport technique n° EPM-RT-2006-06). Disponible
Kerboua, Y., Lakis, A., Thomas, M., & Marcouiller, L. (2006). Vitesse critique induite par un écoulement potentiel sur un système de plaques. (Rapport technique n° EPM-RT-2006-05). Disponible
Kerboua, Y., Lakis, A., Thomas, M., & Marcouiller, L. (2006). Analyse dynamique des systèmes de plaques en intéraction avec un fluide et applications. (Rapport technique n° EPM-RT-2006-01). Disponible
Merlet, S., Thomas, M., Lakis, A., & Marcouiller, L. (2006). Conception d'un banc d'essais pour modèles de turbines hydrauliques. (Rapport technique). Non disponible
Toorani, M. H., & Lakis, A. (juin 2006). Coupled fluid-structure interaction in composite cylindrical shells conveying axial flow [Communication écrite]. 3rd European Conference on Computational Mechanics, Solids, Structures and Coupled Problems in Engineering, Lisbon, Portugal. Non disponible
Ouahabi, A., Thomas, M., & Lakis, A. (octobre 2006). Détection de fissures de respiration de fatigue par excitation harmonique et analyse temps-fréquence [Communication écrite]. 24th Seminar on Machinery Vibration (CMVA 2006), Montréal, Québec. Lien externe
Ouahabi, A., Thomas, M., & Lakis, A. (juillet 2006). Detection of damages in beams and composite plates by harmonic excitation and time-frequency analysis [Communication écrite]. 3rd European Workshop on Structural Health Monitoring, Granada, Spain. Non disponible
Kerboua, Y., Lakis, A., Thomas, M., Marcouiller, L., & Toorani, M. H. (novembre 2006). Dynamic analysis of coupled fluid-structure systems [Communication écrite]. 2nd WSEAS International Conference on Applied and Theoretical Mechanics (MECHANICS 2006), Venice, Italy. Lien externe
Toorani, M. H., & Lakis, A. (2006). Free vibrations of non-uniform composite cylindrical shells. Nuclear Engineering and Design, 236(17), 1748-1758. Lien externe
Komgom, N. C., Mureithi, N., & Lakis, A. (2006). Literature review of fault detection using support vector machines or artificial neural networks augmented by genetic aglorithms. (Rapport technique). Non disponible
Vu, V. H., Thomas, M., & Lakis, A. (octobre 2006). Operational modal analysis in time domain [Communication écrite]. 24th Seminar on Machinery Vibration (CMVA 2006), Montréal, Québec. Lien externe
Toorani, M. H., & Lakis, A. (2006). Swelling effect on the dynamic behaviour of composite cylindrical shells conveying fluid. International Journal for Numerical Methods in Fluids, 50(4), 397-420. Lien externe
Badri, B., Archambault, R., Thomas, M., Sassi, S., & Lakis, A. (octobre 2006). La transformée de Julien pour différencier les chocs synchrones des chocs asynchrones [The Julien transform to detect synchronous and asynchronous shock data]. [Communication écrite]. 24th Seminar on Machinery Vibration (CMVA 2006), Montréal, Québec. Lien externe
Kerboua, Y., Lakis, A., Thomas, M., & Marcouiller, L. (2005). Comportement dynamique des plaques rectangulaires submergées. (Rapport technique n° EPM-RT-2005-05). Disponible
Thomas, M., Abassi, K., Lakis, A., & Marcouiller, J. L. (octobre 2005). Analyse modale expérimentale d'une structure soumise à un écoulement turbulent [Operational modal analysis of a structure subjected to a turbulent flow]. [Communication écrite]. 23rd Seminar on Machinery Vibration, Edmonton, Alberta. Lien externe
Lakis, A., & Safizadeh, M. S. (2005). Time-frequency algorithms. International Journal of WSEAS, 4(1). Non disponible
Safizadeh, M. S., Lakis, A., & Thomas, M. (avril 2005). Using short-time Fourier transform in machinery diagnosis [Communication écrite]. 4th WSEAS International Conference on Electronics, Signal Processing and Control (ESPOCO 2005), Rio de Janeiro, Brazil (7 pages). Lien externe
Lakis, A., & Kerboua, Y. (2005). Using short-time Fourrier transform in machinery diagnosis. COMADEM, 10(1), 310-361. Non disponible
Sanschagrin, B., Fortin, C., Vadean, A., & Lakis, A. (juillet 2005). Virtual product development within a fourth year option in the mechanical enginering curriculum [Communication écrite]. Canadian Design Engineering Network Conference, Kaninaskis, Alberta, Canada. Lien externe
Toorani, M. H., & Lakis, A. (septembre 2004). Dynamic behavior of composite non-uniform cylindrical shells conveying axial flow [Communication écrite]. 7th International Conference on Computational Structures Technology, Lisbon, Portugal. Non disponible
Toorani, M. H., & Lakis, A. (juillet 2004). Fluid-structure dynamics with a hybrid method [Communication écrite]. 8th International Conference on Flow-Induced Vibrations (FIV 2004), Paris, France. Non disponible
Toorani, M. H., & Lakis, A. (juillet 2004). Hybrid finite element in non-linear structural dynamics of anisotropic tubes conveying axial flow [Communication écrite]. 7th International Conference on Flow-Induced Vibrations (FIV 2004), Paris, France. Non disponible
Mabrouki, F., Thomas, M., & Lakis, A. (octobre 2004). Improving the vibratory behaviour of a flexible plate using combined experimental measurements and finite element modelling [Communication écrite]. 22nd Seminar on Machinery Vibration, Ottawa, Ontario (18 pages). Non disponible
Toorani, M. H., & Lakis, A. (septembre 2002). Large amplitude vibrations of anisotropic cylindrical shells [Communication écrite]. 6th International Conference on Computational Structures Technology and 3rd International Conference on Engineering Computational Technology (CST/ECT 2002), Prague, Czech Republic. Publié dans Computers & Structures, 82(23-26). Lien externe
Thomas, M., Lakis, A., & Archambault, R. (octobre 2004). A new technique to detect rolling element bearing faults: the Julien method [Communication écrite]. 5th International Conference on Acoustical and Vibratory Surveillance Methods and Diagnostic Techniques, Senlis, France. Non disponible
Safizadeh, M. S., Lakis, A., & Thomas, M. (février 2004). Rotating machinery fault diagnosis using time-frequency methods [Communication écrite]. WSEAS Multiconference, Salzburg, Austria. Lien externe
Toorani, M. H., & Lakis, A. (septembre 2004). Stability of composite non-uniform cylindrical tubes subjected to axial flow [Communication écrite]. 7th International Conference on Computational Structures Technology, Lisbon, Portugal. Non disponible
Thomas, M., Lakis, A., & Sassi, S. (2004). A theoretical model for predicting adverse health effects of long-term whole-body random vibration exposure. Dans Recent research developments in sound and vibration (55-73). Non disponible
Toorani, M. H., & Lakis, A. (2003). Dynamics behavior of axisymmetric and beam-like anisotropic cylindrical shells conveying fluid. Journal of Sound and Vibration, 259(2), 265-298. Lien externe
Lakis, A. (2003). Étude comparative concernant la fiabilité et la sécurité des aéronefs de nouvelle génération de type monomoteur turbopropulsé versus les aéronefs bimoteurs à pistons et bimoteurs turbopropulsés à hélices. (Rapport technique n° C.C.T.P2873). Non disponible
Toorani, M. H., Lakis, A., & Gou, M. (septembre 2003). Hybrid finite element analysis of vibrations of anisotropic cylindrical shells conveying fluid [Communication écrite]. 9th International Conference on Civil and Structural Engineering Computing, Egmond aan Zee, Netherlands. Lien externe
Toorani, M. H., & Lakis, A. (décembre 2003). Hybrid finite element in non-linear structural dynamics of anisotropic tubes conveying axial flow [Communication écrite]. 2nd WSEAS International Conference on Non-Linear Analysis, Non-Linear Systems and Chaos (WSEAS NOLASC 2003), Athens, Greece. Publié dans WSEAS Transactions on Mathematics, 2(4). Non disponible
Toorani, M. H., & Lakis, A. (décembre 2003). Hybrid finite element in non-linear structural dynamics of anisotropic tubes conveying axial flow [Communication écrite]. 2nd WSEAS International Conference on Non-Linear Analysis, Non-Linear Systems and Chaos (NOLASC 2003), Athens, Greece (12 pages). Lien externe
Toorani, M. H., & Lakis, A. (mai 2003). Non-linear flow-induced vibrations of cylindrical tubes [Communication écrite]. International Congress on Advanced Nuclear Power Plant (ICAPP 2003), Cordoba, Spain. Non disponible
Thomas, M., & Lakis, A. (juin 2002). Detection of breathing crack by time-frequency analysis [Communication écrite]. 30th International Conference on Computers & Industrial Engineering, Tinos Island, Greece. Non disponible
Toorani, M. H., & Lakis, A. (janvier 2002). Dynamic and stability of anisotropic cylindrical shells conveying axial flow [Communication écrite]. International Congress on Advances in Nuclear Power Plants (ICAPP 2002), Hollywood, FL, USA. Non disponible
Toorani, M. H., & Lakis, A. (novembre 2002). Flow-induced vibration of anisotropic cylindrical shells [Communication écrite]. 5th International Symposium on Fluid-Structure Interaction, Aeroelasticity, Flow-Induced Vibration and Noise, part of ASME International Mechanical Engineering Congress and Exposition, New Orleans, Louisiana. Lien externe
Safizadeh, M. S., Lakis, A., & Thomas, M. (octobre 2002). Gear fault diagnosis using time frequency methods [Diagnostic de défauts d'engrenages par analyse temps-fréquence]. [Communication écrite]. 20th Seminar on Machinery Vibration, Québec, Québec. Lien externe
Toorani, M. H., & Lakis, A. (2002). Geometrically non-linear dynamics of anisotropic open cylindrical shells with a refined shell theory. (Rapport technique n° EPM-RT-2001-07). Disponible
Toorani, M. H., & Lakis, A. (octobre 2002). Hybrid finite element in vibrations of composite cylindrical shells [Communication écrite]. 7th Conference of Shell Structures Theory and Applications (SSTA 2002), Warsaw, Poland. Non disponible
Toorani, M. H., & Lakis, A. (avril 2002). Non-linear fluid-structure interaction in cylindrical shells [Communication écrite]. 10th International Conference on Nuclear Engineering (ICONE 10). Lien externe
Toorani, M. H., & Lakis, A. (septembre 2002). Non-linear vibrations of anisotropic cylindrical shells [Communication écrite]. 6th International Conference on Computational Structures Technology (ICCST 2002), Prague, Czech Republic. Non disponible
Safizadeh, M. S., Lakis, A., & Thomas, M. (octobre 2002). Rotating machinery fault diagnosis using time-frequency methods [Communication écrite]. 20th Machinery Vibration, Reliability and Maintenance Seminar and Annual General Meeting, Québec, Québec. Non disponible
Thomas, M., Lakis, A., Hamidi, L., & Massoud, M. (octobre 2002). Rotor health monitoring by modal analysis [Communication écrite]. 20th Seminar on Machinery Vibration, Québec, Québec. Lien externe
Safizadeh, M. S., Lakis, A., & Thomas, M. (juin 2002). Time-frequency algorithms and their applications [Communication écrite]. EUROMECH Colloquium 437 : Identification and Updating Methods of Mechanical Structures, Prague, Czech Republic. Non disponible
Safizadeh, M. S., Lakis, A., & Thomas, M. (2002). Time-frequency distributions and their application to machinery fault detection. International Journal of Condition Monitoring and Diagnosis Engineering Management, 5(2), 41-56. Non disponible
Toorani, M. H., & Lakis, A. (2001). Dynamic analysis of anisotropic cylindrical shells containing flowing fluid. Journal of Pressure Vessel Technology, 123(4), 454-460. Lien externe
Toorani, M. H., & Lakis, A. (juillet 2001). Dynamic analysis of anisotropic cylindrical shells containing flowing fluid [Communication écrite]. Flow-Induced Vibration Conference, presented at the Pressure Vessels and Piping Conference (PVP 2001), Atlanta, Georgia. Non disponible
Oncescu, F., Lakis, A., & Ostiguy, G. L. (2001). Investigation of the stability and steady state response of asymmetric rotors, using finite element formulation. Journal of Sound and Vibration, 245(2), 303-328. Lien externe
Lakis, A., & Païdoussis, M. P. (2001). Non-uniform shell/flow vibration analysis for target plant. (Rapport technique n° 110). Non disponible
Haulin, E. N., Lakis, A., & Vinet, R. (2001). Optimal Synthesis of a Planar Four-Link Mechanism Used in a Hand Prosthesis. Mechanism and Machine Theory, 36(11-12), 1203-1214. Lien externe
Charbonneau, E., & Lakis, A. (2001). Semi-analytical shape functions in the finite element analysis of rectangular plates. Journal of Sound and Vibration, 242(3), 427-443. Lien externe
Toorani, M. H., & Lakis, A. (2001). Shear deformation in dynamic analysis of anisotropic laminated open cylindrical shells filled with or subjected to a flowing fluid. Computer Methods in Applied Mechanics and Engineering, 190(37-38), 4929-4966. Lien externe
Toorani, M. H., & Lakis, A. (avril 2001). Vibration analysis of axisymmetric and beam-like cylindrical shells containing flowing fluid [Communication écrite]. 9th International Conference on Nuclear Engineering (ICONE 2001), Nice, France. Non disponible
Lakis, A. (2000). Comments on "Natural Frequencies of Transverse Vibrations of Non-Uniform Circular and Annular Plates" - Reply. Journal of Sound and Vibration, 230(2), 448-448. Lien externe
Safizadeh, M. S., Lakis, A., & Thomas, M. (mars 2000). Diagnostic des machines par les méthodes temps-fréquence [Communication écrite]. Annual Canadian Machinery Vibration Association Seminar, Montréal, Québec. Non disponible
Toorani, M. H., Lakis, A., & Amabili, M. (juin 2000). Dynamic behavior of anisotropic shells including transverse shear deformation and rotary inertia effects [Communication écrite]. 4th International Colloquium on Computation of Shell & Spatial Structures (IASS-IACM 2000), Chania, Greece. Non disponible
Lakis, A., Païdoussis, M. P., & Dupuis, C. (juin 2000). Dynamic stability of fluid-conveying cylindrical shells using a hybrid finite element approach [Communication écrite]. 7th International Conference on Flow Induced Vibrations (FIV 2000), Lucerne, Switzerland. Lien externe
Toorani, M. H., & Lakis, A. (2000). General equations of anisotropic plates and shells including transverse shear deformations, rotary inertia and initial curvature effects. Journal of Sound and Vibration, 237(4), 561-615. Lien externe
Lakis, A., & Selmane, A. (2000). Hybrid finite element analysis of large amplitude vibration of orthotropic open and closed cylindrical shells subjected to a flowing fluid. Nuclear Engineering and Design, 196(1), 15 pages. Lien externe
Safizadeh, M. S., & Lakis, A. (janvier 2000). Machinery diagnosis by time-frequency analysis [Communication écrite]. NSF Design and Manufacturing Research Conference, Vancouver, B. C.. Non disponible
Lakis, A., Selmane, A., & Dupuis, C. (novembre 2000). Non-linear dynamic analysis of cylindrical shells subjected to a flowing fluid [Communication écrite]. International Mechanical Engineering Congress and Exposition (IMECE 2000), Orlando, FL (8 pages). Lien externe
Safizadeh, M. S., Lakis, A., & Thomas, M. (2000). Time-frequency algorithms and their applications. International Journal of Computers and Their Applications, 7(4), 20 pages. Non disponible
Toorani, M. H., & Lakis, A. (avril 2000). Transverse shear deformation in dynamic behavior of anisotropic laminated piping subjected to a flowing fluid [Communication écrite]. 8th International Conference on Nuclear Engineering (ICONE 2000), Baltimore, MD. Non disponible
Safizadeh, M. S., Lakis, A., & Thomas, M. (2000). Using short-time Fourier transforms in machinery fault diagnosis. International Journal of COMADEM, 3(1), 5-16. Non disponible
Toorani, M. H., & Lakis, A. (mai 2000). Vibration analysis of anisotropic laminated cylindrical shells filled with or subjected to a flowing fluid [Communication écrite]. 4th International Conference of Iranian Society of Mechanical Engineers (ISME 2000), Teheran, Iran. Non disponible
Safizadeh, M. S., Lakis, A., & Thomas, M. (1999). Application of short-time fourier transform in machine fault detection. (Rapport technique n° EPM-RT-99-05). Disponible
Safizadeh, M. S., Lakis, A., & Thomas, M. (juillet 1999). Application of short-time Fourier transform in machine fault detection [Communication écrite]. 12th International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management (COMADEM 1999), Sunderland, UK. Non disponible
Smail, M., Thomas, M., & Lakis, A. (1999). ARMA models for modal analysis: Effect of model orders and sampling frequency. Mechanical Systems and Signal Processing, 13(6), 925-941. Lien externe
Smail, M., Thomas, M., & Lakis, A. (1999). Assessment of optimal ARMA model orders for modal analysis. Mechanical Systems and Signal Processing, 13(5), 803-819. Lien externe
Safizadeh, M. S., Lakis, A., & Thomas, M. (1999). Condition monitoring and diagnostic of rotating machinery by means of wavelet transforms. (Rapport technique n° EPM-RT-99-07). Disponible
Toorani, M. H., & Lakis, A. (1999). Effects of transverse shear deformation and rotary inertia on the general equations of anisotropic plates and shells. (Rapport technique n° EPM-RT-99-03). Disponible
Toorani, M. H., & Lakis, A. (1999). Effects of transverse shear deformations on the free vibration of anisotropic open circular cylindrical shells. (Rapport technique n° EPM-RT-99-04). Disponible
Toorani, M. H., & Lakis, A. (1999). Effects of transverse shear deformations on the free vibration on anisotropic open circular cylindrical shells. (Rapport technique n° EPM-RT-99-04). Non disponible
Safizadeh, M. S., Lakis, A., & Thomas, M. (1999). Fault detection and identification using Wigner-Ville distribution. (Rapport technique n° EPM-RT-99-06). Disponible
Selmane, A., & Lakis, A. (1999). Natural frequencies of transverse vibrations of non-uniform circular and annular plates. Journal of Sound and Vibration, 220(2), 225-249. Lien externe
Charbonneau, E., & Lakis, A. (1999). Semi-analytical shape functions in the finite element analysis of rectangular plates. (Rapport technique n° EPM-RT-99-19). Disponible
Safizadeh, M. S., Lakis, A., & Thomas, M. (1999). Time-frequency algorithm. (Rapport technique n° EPM-RT-99-08). Non disponible
Safizadeh, M. S., Lakis, A., & Thomas, M. (janvier 1999). Using short-time Fourier transform in machinery fault diagnosis [Communication écrite]. International Conference and Exhibition on Condition Monitoring and Diagnostic Engineering Management (COMADEM 1999), Sunderland, UK. Non disponible
Smail, M., Thomas, M., & Lakis, A. (juin 1999). Utilisation de la modélisation ARMA pour la détection de fissures dans les rotors [Communication écrite]. 3rd Industrial Automation International Conference, Montréal, Québec. Non disponible
Lakis, A., & Dupuis, C. (janvier 1998). A hybrid finite element method to study the dynamic stability of fluid-conveying cylindrical shells [Communication écrite]. 6th Pan American Congress of Applied Mechanics, Rio de Janeiro, Brazil. Non disponible
Lakis, A., Selmane, A., & Toledano, A. (1998). Non-Linear Free Vibration Analysis of Laminated Orthotropic Cylindrical Shells. International Journal of Mechanical Sciences, 40(1), 27-49. Lien externe
Haulin, E. N., Lakis, A., & Vinet, R. (mai 1998). Performance et optimisation d'un mécanisme à quatre membrures [Communication écrite]. Canadian Society for Mechanical Engineering Forum, Toronto, Ont.. Non disponible
Smail, M., Thomas, M., & Lakis, A. (octobre 1998). Use of ARMA modelization for faults detection in rotating machinery [Communication écrite]. 3rd International Conference on Acoustical and Vibratory Surveillance Methods and Diagnostics Techniques, Senlis, France. Non disponible
Lakis, A., & Selmane, A. (mai 1998). Vibration analysis of circumferentially non-uniform cylindrical shells subjected to a flowing fluid [Communication écrite]. 6th International Conference on Nuclear Engineering (ICONE 1998), San Diego, California. Non disponible
Amabili, M., Paidoussis, M. P., & Lakis, A. (1998). Vibrations of partially filled cylindrical tanks with ring-stiffeners and flexible bottom. Journal of Sound and Vibration, 213(2), 259-299. Lien externe
Lakis, A., & Selmane, A. (1997). Classical solution shape functions in the finite element analysis of circular and annular plates. International Journal for Numerical Methods in Engineering, 40(6), 969-990. Lien externe
Selmane, A., & Lakis, A. (1997). Dynamic analysis of anisotropic open cylindrical shells. Computers and Structures, 62(1), 1-12. Lien externe
Selmane, A., & Lakis, A. (janvier 1997). Dynamic stability of orthotropic open and closed cylindrical shells subjected to a flowing fluid [Communication écrite]. 5th Pan American Congress of Applied Mechanics (PACAM 1997), San Juan. Non disponible
Lakis, A., & Neagu-Corneliu, S. (novembre 1997). Effects of free surface on the dynamic behavior of a cylindrical shell partially filled with liquid [Communication écrite]. 4th ASME International Symposium on Fluid-Structure Interactions, Aeroelasticity, Flow-Induces Vibration and Noise, Dallas, Texas (10 pages). Non disponible
Lakis, A., & Neagu, S. (novembre 1997). Free surface effects on the dynamics of cylindrical shells partially filled with liquid [Communication écrite]. ASME International Mechanical Engineering Congress and Exposition (IMECE 1997), Dallas, TX, USA. Lien externe
Lakis, A., & Neagu, S. (1997). Free surface effects on the dynamics of cylindrical shells partially filled with liquid. Journal of Sound and Vibration, 207(2), 175-205. Lien externe
Selmane, A., & Lakis, A. (1997). Influence of geometric non-linearities on the free vibrations of orthotropic open cylindrical shells. International Journal for Numerical Methods in Engineering, 40(6), 1115-1137. Lien externe
Lakis, A., & Selmane, A. (mai 1997). Non linear dynamic analysis of orthotopic open and closed cylindrical shells subjected to a flowing fluid [Communication écrite]. 5th International Conference on Nuclear Engineering (ICONE 1997), Nice, France. Non disponible
Selmane, A., & Lakis, A. (1997). Non-linear dynamic analysis of orthotropic open cylindrical shells subjected to a flowing fluid. Journal of Sound and Vibration, 202(1), 67-93. Lien externe
Selmane, A., & Lakis, A. (1997). Vibration analysis of anisotropic open cylindrical shells subjected to a flowing fluid. Journal of Fluids and Structures, 11(1), 111-134. Lien externe
Lakis, A., & Selmane, A. (juillet 1997). Vibration analysis of circumferentially non-uniform cylindrical shells subjected to a flowing fluid [Communication écrite]. 6th International Conference on Structural dynamics: Recent Advances, Southampton, UK. Non disponible
Lakis, A., Selmane, A., & Toledano, A. (juillet 1996). Non-linear dynamic analysis of anisotropic cylindrical shells [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 1996), Montréal, Québec. Non disponible
Archambault, R., Asotev, Y., Lakis, A., & Lavoie, D. (juin 1995). Accurate determination of rolling-element bearing condition in aircraft engines [Communication écrite]. 7th International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM 1995), Kingston, Ontario (10 pages). Non disponible
Lakis, A. (juillet 1995). Analysis of contact stresses on cylindrical vessels [Communication écrite]. Contact Mechanics II, Ferrara, Italy. Non disponible
Selmane, A., & Lakis, A. (1995). Dynamic analysis of anisotropic open cylindrical shells. (Rapport technique n° EPM-RT-95-10). Disponible
Lakis, A., Selmane, A., & Archambault, R. (octobre 1995). Dynamic vibrations on anisotropic open cylindrical shells [Communication écrite]. 2nd International Conference on Acoustical and Vibratory Surveillance Methods and Diagnostic Techniques, Senlis, France. Non disponible
Lakis, A., & Selmane, A. (1995). Hybrid finite element analysis of circular and annular plates. (Rapport technique n° EPM-RT-95-12). Disponible
Selmane, A., & Lakis, A. (1995). Influence of geometric non-linearities on the free vibrations of anisotropic open cylindrical shells. (Rapport technique n° EPM-RT-95-11). Disponible
Lakis, A., Selmane, A., & Toledano, A. (1995). Non-linear dynamic analysis of anisotropic cylindrical shells. (Rapport technique n° EPM-RT-95-13). Disponible
Lakis, A., & Selmane, A. (décembre 1995). Non-linear free vibrations of anisotropic open cylindrical shells [Communication écrite]. International Conference on Structural Dynamics, Vibration, Noise and Control (SDVNC 1995), Hong Kong. Non disponible
Selmane, A., & Lakis, A. (1995). Vibration analysis of anisotropic open cylindrical shells containing flowing fluid. (Rapport technique n° EPM-RT-95-09). Disponible
Archambault, R., Barkov, A., Lakis, A., & Irwin, M. (août 1994). Optimization of rolling-element bearings usage through condition monitoring [Communication écrite]. International Association of Science and Technology for Development Conference on Reliability Engineering & Its Applications, Honolulu, Hawaii. Non disponible
Lakis, A., & Archambault, R. (août 1993). Spatial correlation in fluid-structural coupling [Communication écrite]. 4th International Congress on Intensity Techniques, Senlis, France. Non disponible
Lakis, A. (1992). Analysis of contact stresses on cylindrical vessels. (Rapport technique n° EPM-RT-92-29). Non disponible
Lakis, A., Van Dyke, P., & Ouriche, H. (1992). Dynamic analysis of anisotropic fluid-filled conical shells. Journal of Fluids and Structures, 6(2), 135-162. Lien externe
Lakis, A., & Sinno, M. (1992). Free vibration of axisymmetric and beam-like cylindrical shells, partially filled with liquid. International Journal for Numerical Methods in Engineering, 33(2), 235-268. Lien externe
Lakis, A. (1992). A hybrid finite element and classical shells theories : advantage and limitations. (Rapport technique n° EPM-RT-92-28). Non disponible
Archambault, R., Barkov, A., Lakis, A., & Irwin, M. (février 1992). Optimizing bearing life while minimizing the risk of failure through improved condition monitoring techniques and data management schemas baser superior discriminants analysis and operational reliability [Communication écrite]. 4th International Machinery Monitoring and Diagnostic Conference, Houston, Texas. Non disponible
Lakis, A., Archambault, R., & Selmane, A. (1992). Prediction of the response of a cylindrical shell to arbitrary random pressure fields. (Rapport technique n° EPM-RT-92). Non disponible
Lakis, A., & Laveau, A. (juin 1991). Non linear dynamic analysis of anisotropic cylindrical shells containing a flowing fluid [Communication écrite]. Pressure Vessels and Piping Conference (PVP 1991), Nashville, TN. Non disponible
Lakis, A., & Laveau, A. (1991). Non-linear dynamic analysis of anisotropic cylindrical shells containing a flowing fluid. International Journal of Solids and Structures, 28(9), 1079-1094. Lien externe
Lakis, A. (septembre 1990). Analysis of contact stresses on cylindrical vessels [Communication écrite]. Contact loading and local effects in thin-walled plated and shell structures, Prague, Czechoslovakia (8 pages). Non disponible
Lakis, A., & Selmane, A. (janvier 1990). Analysis of non-uniform circular and annular plates [Communication écrite]. International Conference Series on Advances in Numerical Methods in Engineering: Theory and Application (NUMETA 1990), Swansea, England. Non disponible
Lakis, A., & Sinno, M. (janvier 1990). Free vibration of axisymmetric and beam-like cylindrical shells, partially filled with liquid [Communication écrite]. International Conference Series in Advances in Numerical Methods in Engineering: Theory and Application (NUMETA 1990), Swansea, England (10 pages). Non disponible
Lakis, A., & Selmane, A. (juillet 1992). Hybrid finite element analysis of non-uniform circular and annular plates [Communication écrite]. International Conference on Structural Testing, Analysis and Design (ICSTAD 1990), Bangalore, India. Non disponible
Lakis, A., & Selmane, A. (mai 1989). Analyse dynamique des plaques circulaires non-uniformes [Communication écrite]. 12e Congrès canadien de mécanique appliquée, Ottawa, Ontario. Non disponible
Lakis, A., & Ouriche, H. (octobre 1989). Analysis of anisotropic conical shells [Communication écrite]. 6th SAS World Conference on Structural Analysis and Optimization (FEMCAD 1989), Paris, France (6 pages). Non disponible
Lakis, A., Tuy, N. Q., Laveau, A., & Selmane, A. (mai 1989). Analysis of axially non-uniform thin spherical shells [Communication écrite]. International Symposium on Structural Analysis and Optimization (FEMCAD 1989), Paris, France. Non disponible
Lakis, A., & Selmane, A. (1989). Dynamic analysis of non-uniform circular plates. (Rapport technique n° EPM-RT-89-04). Disponible
Lakis, A., Laveau, A., & Selmane, A. (mai 1989). Non-linear dynamic analysis of anisotropic cylindrical shells containing a flowing fluid [Communication écrite]. International Symposium on Structural Analysis and Optimization, Paris, France. Non disponible
Lakis, A., & Van Dyke, P. (1988). Dynamic analysis of anisotropic cylindrical shells containing a flowing fluid. (Rapport technique n° EPM-RT-88-12). Non disponible
Lakis, A., & Van Dyke, P. (1988). Dynamic Analysis of conical shells containing flowing fluid. (Rapport technique n° EPM-RT-88-12). Disponible
Lakis, A., & Nguyen, Q. T. (1988). Dynamic analysis of spherical shells : a hybrid method. (Rapport technique n° EPM-RT-88-23). Disponible
Lakis, A., & Nguyen, D. T. (1988). Liquid phase velocity of turbulent dispersed bubbles flow in large diameter horizontal pipes. (Rapport technique n° EPM-RT-88-24). Disponible
Lakis, A., & Laveau, A. (1988). Non-linear dynamic analysis of anisotropic cylindrical shells containing a flowing fluid. (Rapport technique n° EPM-RT-88-13). Disponible
Lakis, A., & Nguyen, D. T. (1988). Void fraction in highly turbulent and large diameter horizontal pipe flow. (Rapport technique n° EPM-RT-88-28). Disponible
Lakis, A., & Boisnaud, P. (1986). Analysis of anisotropic thin conical shells. (Rapport technique n° EPM-RT-86-38). Disponible
Lakis, A., & Nguyen, D. T. (1986). Dynamic analysis of a Timoshenko beam using a finite element approach. (Rapport technique n° EPM-RT-86-34). Disponible
Lakis, A., & Ouriche, H. (1986). Dynamic analysis of anisotropic conical shells. (Rapport technique n° EPM-RT-86-36). Disponible
Lakis, A. (janvier 1986). Effect of random pressure fluctuations induced by turbulent flow [Communication écrite]. 7th Brazilian Congress on Mechanical Engineering, Sao Paulo, Brazil. Non disponible
Lakis, A., & Sinno, M. (1986). Free vibration of axisymmetric and beam-like cylindrical shells, partially filled with liquid. (Rapport technique n° EPM-RT-86-35). Disponible
Lakis, A., & Toledano, A. (1986). Non-linear analysis of cylindrical shells. (Rapport technique n° EPM-RT-86-37). Disponible
Lakis, A. (juillet 1986). Two phase parameters on highly turbulent bubbly flow in horizontal large channel [Communication écrite]. 3rd International Symposium on Applications of Laser Anemometry to Fluid Mechanics, Lisbon, Portugal. Non disponible
Lakis, A., & Boisnaud, P. (1985). Analysis of anisotropic thin shells. (Rapport technique n° EPM-RT-85-25). Non disponible
Lakis, A., & Ouriche, H. (1985). Dynamic analysis anisotropic conical shells. (Rapport technique n° EPM-RT-85-23). Non disponible
Lakis, A., & Trinh, N. D. (1985). Dynamic analysis of Timoshenko Beam using a finite element approach. (Rapport technique n° EPM-RT-85-21). Non disponible
Lakis, A. (juillet 1985). Prediction of shell response and wall-pressure fluctuations in turbulent single and two-phase flows [Communication écrite]. 4th International Conference on Numerical Methods in Laminar and Turbulent Flows, Swansea, England. Non disponible
Sami, S. M., & Lakis, A. (août 1984). Comparison of wall pressure fluctuations in turbulent single and two-phase flows [Communication écrite]. 22nd National Heat Transfer Conference, Niagara Falls, N.Y.. Non disponible
Lakis, A. (juin 1984). A hybrid finite element and classical shell theories: Advantages and limitations [Communication écrite]. International Conference on Accuracy Estimates and Adaptative Refinements in Finite Element Computation, Lisbon, Portugal. Non disponible
Lakis, A. (décembre 1983). Analysis of anisotropic shells containing flowing fluid [Communication écrite]. 7th Brazilian Congress of Mechanicals Engineering, Uberlandia, Brazil. Non disponible
Lakis, A., & Sami, S. M. (juin 1981). Acquisition channel for phase and wall pressure prediction in turbulent two-phase flow [Communication écrite]. 8e Colloque sur le traitement du signal et ses applications, Nice, France (12 pages). Non disponible
Lakis, A., & Sami, S. M. (1981). Developments of two-phase flow mixture velocities. (Rapport technique n° EP-81-R-38). Non disponible
Lakis, A. (juillet 1981). Numerical and experimental analysis of cylindrical shell subjected to fully developed two-phase flow [Communication écrite]. International Conference on Numerical Methods in Laminar and Turbulent Flow, Swansea, England. Non disponible
Sami, S. M., & Lakis, A. (1981). Prediction of statistical properties of turbulent two-phase flow wall pressure fluctuations. (Rapport technique n° EP-R-81-39). Disponible
Sami, S. M., & Lakis, A. (septembre 1981). Void prediction of two-phase flow in straight runs [Communication écrite]. Advances in Flow Measurement Techniques Conference, London, England. Non disponible
Lakis, A., & Sami, S. M. (1981). Wall pressure fluctuations in turbulent water flows. (Rapport technique n° EP-81-R-40). Non disponible
Lakis, A., Sami, S. M., & Rousselet, J. (juin 1980). Numerical analysis applications in turbulent dispersed two-phase flow [Communication écrite]. 2nd International Symposium on Innovative Numerical Analysis for the Applied Engineering Sciences, Montréal, Québec (10 pages). Non disponible
Lakis, A., & Sami, S. M. (1980). Phase distribution in turbulent dispersed two-phase flow. (Rapport technique n° EP-80-R-29). Non disponible
Lakis, A., & Sami, S. M. (1980). Prediction of velocity characteristics in turbulent water flows. (Rapport technique n° EP-80-R-29). Non disponible
Lakis, A. (juin 1979). Analysis of anisotropic and non-uniform cylindrical shells [Communication écrite]. 3rd National Congress on Pressure Vessel and Piping Division, San Francisco, California (12 pages). Non disponible
Lakis, A. (1979). Exploitation du système SICA (système informatique de contrôle d'apprentissage). (Rapport technique n° EP-79-R-27). Non disponible
Lakis, A., Sami, S. M., & Rousselet, J. (mai 1979). Phase and velocity distribution in turbulent dispersed two-phase flow [Communication écrite]. 7th Canadian Congress of Applied Mechanics (CANCAM 1979), Sherbrooke, Québec. Non disponible
Lakis, A., & Mohamed, S. S. (avril 1979). Pilot-tube measurements in fully developed turbulent dispersed flow [Communication écrite]. 2nd Multi-Phase Flow and Heat Transfer Symposium, Miami, Florida (13 pages). Non disponible
Sami, S. M., & Lakis, A. (mai 1979). Prediction of the velocity distribution in fully developed turbulent dispersed two-phase flow [Communication écrite]. 25th International Symposium of the Instrumentation Society of America, California. Non disponible
Lakis, A., & Mohamed, S. S. (juillet 1979). Prediction of wall pressure fluctuations in turbulent dispersed flow [Communication écrite]. 2nd Symposium on Turbulent Shear Flows, London, England. Non disponible
Lakis, A. (juin 1978). Analysis of non-uniform anisotropic conical shell [Communication écrite]. 8th U.S. National Congress on Applied Mechanics, Los Angeles, California. Non disponible
Lakis, A. (mai 1978). Élément fini et théorie des coques [Communication écrite]. 46e Congrès de l'Association canadienne française pour l'avancement des sciences, Ottawa, Ontario. Non disponible
Lakis, A., & Doré, R. (1978). General method for analysing contact stresses on cylindrical vessels. International Journal of Solids and Structures, 14(6), 499-516. Lien externe
Lakis, A. (juillet 1978). Numerical analysis of wall-pressure fluctuations in two-phase flow [Communication écrite]. 5th International Conference on Numerical Methods in Laminar and Turbulent Flow, Swansea, England. Non disponible
Lakis, A., & Sami, S. M. (1978). On the wall pressure fluctuations of turbulent two-phase flow. (Rapport technique n° EP-78-R-42). Non disponible
Doré, R., Lakis, A., & Thieu, V. C. (septembre 1978). Optimal geometry of saddle supports for cylindrical vessels [Communication écrite]. 2nd International Conference on Applied Numerical Modelling, Madrid, Spain. Non disponible
Sami, S. M., Lakis, A., & Rousselet, J. (janvier 1978). Turbulent two-phase flow loop facility for predicting wall-pressure fluctuations and shell response [Communication écrite]. 24th International Instrumentation Symposium, Pittsburgh, Pennsylvania. Non disponible
Lakis, A., & Khuong, T. V. (1977). Analysis of non-uniform anisotropic thin cylindrical shells. Journal of Computers and Structures, 28(9), 1079-1094. Non disponible
Lakis, A. (1977). Effects of internal and external flow on the vibration characteristics of anisotropic cylindrical shells. (Rapport technique n° EP-R-77-11). Disponible
Lakis, A., & Doré, R. (juillet 1977). Free vibration of anisotropic circular plate subjected to various boundary conditions [Communication écrite]. 9th International Congress on Acoustics, Madrid, Spain. Non disponible
Lakis, A. (mai 1977). Numerical analysis of the response of cylindrical shell containing turbulent flowing fluid [Communication écrite]. International Symposium on Innovative Numerical Analysis in Applied Engineering Science, France. Non disponible
Lakis, A., & Mohamed, S. S. (1977). Survey of cylindrical shell response and wall pressure fluctuations. (Rapport technique n° EP-77-R-41). Non disponible
Lakis, A., & Mohamed, S. S. (1977). Survey of cylindrical shell response and wall-pressure fluctuations. (Rapport technique n° EP-R-77-41). Disponible
Lakis, A. (septembre 1976). Effects of fluid pressure on the vibration characteristics of cylindrical vessels [Communication écrite]. International Conference on Pressure Surges, London, England. Non disponible
Lakis, A. (juin 1976). Theoretical model of cylindrical structures containing turbulent flowing fluid [Communication écrite]. 2nd International Symposium on Finite Element Methods in Flow Problems, Santa Margarita, Italy. Non disponible
Lakis, A., & Khuong, T. V. (mai 1975). Analysis of non-uniform anisotropic thin cylindrical shells [Communication écrite]. 5th Canadian Congress of Applied Mechanics, Fredericton, N.B.. Non disponible
Lakis, A., & Doré, R. (juin 1975). Analysis of pressurized cylindrical vessel and its supports [Communication écrite]. 2nd National Congress on Pressure Vessels and Piping, San Francisco, California (12 pages). Non disponible
Lakis, A., & Doré, R. (1975). General method for analysing contact stresses on cylindrical vessels. (Rapport technique n° EP-R-75-30). Disponible
Lakis, A., & Doré, R. (1974). Displacements and stresses of pressurized : thin cylindrical vessels in contact with rigid supports. (Rapport technique n° EP-R-74-56). Disponible
Lakis, A., & Doré, R. (1974). Dynamic analysis of anisotropic thin cylindrical shells subjected to boundary-layer-induced random pressure fields. (Rapport technique n° EP-R-74-27). Disponible
Lakis, A. (juillet 1974). Dynamic analysis on non-uniform spherical shell [Communication écrite]. 8th International Congress on Acoustics, London, England. Non disponible
Lakis, A., & Doré, R. (juillet 1974). Free vibration and response to random pressure field of anisotropic thin cylindrical shells [Communication écrite]. Noise, Shock and Vibration Conference, Melbourne, Australia. Non disponible
Lakis, A. (juillet 1974). Free vibration of non-uniform spherical shells subjected to various boundary conditions [Communication écrite]. 8th International Congress on Acoustics, London, England. Non disponible
Lakis, A., & Païdoussis, M. P. (janvier 1974). Response of non-uniform cylindrical shell subjected to random pressure field [Communication écrite]. 7th International Congress on Acoustics, Budapest, Hungary. Non disponible
Lakis, A., & Paidoussis, M. P. (1972). Dynamic analysis of axially non‐uniform thin cylindrical shells. Journal of Mechanical Engineering Science, 14(1), 49-71. Lien externe
Lakis, A., & Païdoussis, M. P. (1972). Prediction of the response of a cylindrical shell to arbitrary or boundary-layer-induced random pressure fields. Journal of Sound and Vibration, 25(1), 27 pages. Lien externe
Lakis, A., & Païdoussis, M. P. (1972). Prediction of the response of a cylindrical shell to arbitrary or boundary-layer-induced random pressure fields. (Rapport technique n° 72-2). Lien externe
Païdoussis, M. P., & Lakis, A. (1972). Vibration characteristics of cylindrical shells with several axially equispaced constraints. Journal of Sound and Vibration, 24(1), 51-62. Lien externe
Lakis, A., & Païdoussis, M. P. (1971). Free vibration of cylindrical shells partially filled with liquid. Journal of Sound and Vibration, 19(1), 15 pages. Lien externe
