 | Monter d'un niveau |
Adavi, K. (2025). Microwave Heating-Assisted Chemical Looping Ammonia Synthesis [Thèse de doctorat, Polytechnique Montréal]. Disponible
Adavi, K., Carrillo Garcia, A., Shabanian, J., Latifi, M., & Chaouki, J. (2025). Kinetic study of microwave heating-assisted chemical looping ammonia synthesis over Mn-Fe-Ba-based nitrogen carrier. Fuel, 401, 135874 (14 pages). Lien externe
Afsharipour, M., Fatolahzadeh Gheysari, A., Bouaanani, N., Boudreault, R., & Maghoul, P. (2025). Thermal Modeling of Small Modular Reactors in Permafrost Regions Subjected to Climate Nonstationarity. Journal of Cold Regions Engineering, 39(3), 04025021 (20 pages). Lien externe
Ajji, Z., Jafari, A., Mousavi, A., Ajji, A., Heuzey, M.-C., & Savoji, H. (2025). 3D bioprinting of thick core–shell vascularized scaffolds for potential tissue engineering applications. European Polymer Journal, 222, 10 pages. Lien externe
Al-Sakkari, E. G., Ragab, A., Amer, M., Ajao, O., Benali, M., Boffito, D. C., Dagdougui, H., & Amazouz, M. (2025). Ensemble machine learning to accelerate industrial decarbonization: Prediction of Hansen solubility parameters for streamlined chemical solvent selection. Digital Chemical Engineering, 14, 100207 (26 pages). Disponible
Alad, M., Yousef, F., Epure, L. M., Lui, A., Grant, M. P., Merle, G., Eliopoulos, N., Barralet, J., Antoniou, J., & Mwale, F. (2025). Unraveling Osteoarthritis: Mechanistic Insights and Emerging Therapies Targeting Pain and Inflammation. Biomolecules, 15(6), 874 (26 pages). Lien externe
AlChahir AlHajjar, C. (2025). Regionalized Life Cycle Impact Assessment (LCIA) Fate and Characterization Factors for Microplastic Emissions in the Marine Environment [Thèse de doctorat, Polytechnique Montréal]. Disponible
Alphonius, A., Barbeau, L., Blais, B., Gaboriault, O., Guévremont, O., Lamouche, J., Laurentin, P. J. É., Marquis, O., Münch, P., Oliveira Ferreira, V., Papillon Laroche, H., Patience, P. A., Prieto Saavedra, L., & Vaillant, M. (2025). Lethe 1.0: An open-source parallel high-order computational fluid dynamics software framework for single and multiphase flows. Computer Physics Communications, 109880. Lien externe
Ameri, M. (2025). Development of a Food-Safe Colorimetric Sensor for Monitoring Fish Spoilage Through Volatile Gases Detection [Thèse de doctorat, Polytechnique Montréal]. Disponible
Arndt, D., Bangerth, W., Bergbauer, M., Blais, B., Fehling, M., Gassmöller, R., Heister, T., Heltai, L., Kronbichler, M., Maier, M., Münch, P., Scheuerman, S., Turcksin, B., Uzunbajakau, S., Wells, D., & Wichrowski, M. (2025). The deal.II library, version 9.7. Journal of Numerical Mathematics. Accès restreint
Asiedu-Boateng, P., Asiedu, N. Y., Patience, G. S., McDonough, J., & Živković, V. (2025). Hydrodynamics of limestone in gas-solid micro-fluidized beds. Process Safety and Environmental Protection, 219, 283-295. Lien externe
Asiedu-Boateng, P., Yaw Asiedu, N., Patience, G. S., McDonough, J., & Živković, V. (2025). Carbonation Deactivation of Limestone in a Micro-Fluidized Bed Reactor. Catalysts, 15(8), 697 (15 pages). Lien externe
Askarian, M., Ben Dhieb, F., Fadaei, H., Safizadeh, F., Alizadeh, E., & Latifi, M. (2025). Improved α-alumina production by seed-assisted aluminum chloride hexahydrate crystallization approach. Ceramics International, -. Lien externe
Atile, H., Shabanian, J., Chidami, S., Roohollahi, G., Latifi, M., & Chaouki, J. (juillet 2025). Synthesis and Evaluation of a Novel Catalyst for Direct Joule Heating Steam Methane Reforming [Résumé]. H₂ Excellence Workshop 2025, Montréal, Québec. Lien externe
Badran, Y., Dupuy, D., Blais, B., Moureau, V., Ansart, R., Chaouki, J., & Simonin, O. (2025). Meso-scale numerical analysis of the role of Van der Waals adhesion and static friction in fluidized beds of fine solids. Powder Technology, 455, 120763 (15 pages). Disponible
Bahreini, M., Désilets, M., Pahija, E., & Legrand, U. (2025). Computational modeling of inhomogeneities in the scale-up of industrial CO₂ electrolyzers for formate production. Chemical Engineering Journal Advances, 23, 100816 (16 pages). Lien externe
Baite, T. N., & Dhara, S. (2025). Lignin as an Antioxidant. Dans Jawaid, M., Ahmad, A., & Meraj, A. (édit.), Handbook of Lignin (p. 1-26). Lien externe
Bell, T., Tavares, J. R., & Dumont, M.-J. (2025). Effects of physical treatments and moisture content on chitosan-based hydrogels designed to adsorb ethinylestradiol at low concentrations. Journal of Water Process Engineering, 73, 107709 (13 pages). Lien externe
Bell, T., Tavares, J. R., & Dumont, M.-J. (2025). A review of adsorbents engineered from biological materials developed to remediate estrogen pollution in the environment. Journal of Environmental Chemical Engineering, 13(1), 115274 (17 pages). Disponible
Benmore, C. J., Shi, C., Alderman, O. L. G., Harvey, J.-P., Lipke, D. W., & Weber, R. J. K. (2025). Structure–property relations of binary ferrite melts. Journal of Applied Physics, 137(8), 085903 (20 pages). Disponible
Berger, M., Gerbens-Leenes, W., Karandish, F., Aldaya, M. M., Boulay, A.-M., Hogeboom, R. J., Link, A., Manzardo, A., Mialyk, O., Motoshita, M., Núñez, M., Pfister, S., Rosenbaum, R. K., Scherer, L., Su, H., & Wöhler, L. (2025). Complementary strengths of water footprint and life cycle assessments in analyzing global freshwater appropriation and its local impacts – Recommendations from an interdisciplinary discussion series. Ecological Indicators, 174, 113458 (20 pages). Disponible
Berthelot, S., Ménard, J.-F., Bélanger-Chabot, G., Arias Garcia, G., Mantovani, D., Simard, C., Guertin, J. R., Marx, T., & Bluteau, A. (2025). Comparison of the Ecological Footprints of administering Salbutamol by Metered-Dose Inhaler and by Nebulization in Emergency Department Treatment of Acute Asthma (dataset) [Ensemble de données]. Lien externe
Berthelot, S., Ménard, J.-F., Bélanger-Chabot, G., Arias Garcia, G., Mantovani, D., Simard, C., Guertin, J. R., Marx, T., & Bluteau, A. (2025). Ecological footprint of salbutamol administration by metered-dose inhaler versus nebulisation in acute asthma: a life-cycle assessment. JRSM Open, 16(10), 10 pages. Lien externe
Berthet, L., Blais, P., Nennemann, B., Monette, C., & Gosselin, F. (2025). Mode split prediction for rotating disks with flexible stator coupling. Journal of Fluids and Structures, 132, 18 pages. Lien externe
Bertrand, M., Brenner Johnson, N., Jin, L., Bates, A., Chartrand, P., Torres-Castro, L., & Dollé, M. (2025). Are Solid State Batteries Non-Flammable? Meeting abstracts/Meeting abstracts (Electrochemical Society. CD-ROM), MA2025-01(5), 638 (1 page). Lien externe
Bertrand, M., Brenner Johnson, N., Jin, L., Bates, A., Chartrand, P., Torres-Castro, L., & Dollé, M. (2025). Unveiling the thermite-driven lithium fire ignition in solid-state batteries. Joule, 101953. Lien externe
Bianchi, C. L., Falletta, E., Galloni, M. G., Fabbrizio, V., Cerrato, G., & Boffito, D. C. (juin 2025). Floating photocatalysts as an innovative solar-powered technology for wastewater treatment: leveraging sustainability to support vulnerable communities [Résumé]. 7th International Conference on Environmental Applications of Advanced Oxidation Processes (EAAOP-7), Paestum (Salerno), Italy (2 pages). Lien externe
Blizard, G. S., Dwivedi, G., Pan, Y.-G., Hou, C., Etersque, J. M., Said, H., Chevrier, A., Lavertu, M., Ni, H., Davis, B., Tam, Y. K., Cao, Q., Mach, R. H., Weissman, D., Alameh, M.-G., & Sellmyer, M. A. (2025). Monitoring mRNA vaccine antigen expression in vivo using PET/CT. Nature Communications, 16, 2234 (14 pages). Disponible
Boffito, D. C. (2025). Scaling process intensification technologies: what does it take to deploy? Chemical Engineering and Processing - Process Intensification, 212, 110275 (5 pages). Disponible
Bradley Dsouza, K., Ofosu, E., Boudreault, R., Moreno-Cruz, J., & Leonenko, Y. (2025). Substantial carbon removal capacity of Taiga reforestation and afforestation at Canada's boreal edge. Communications Earth & Environment, 6(1), 893-893. Lien externe
Braide, D., Ibrahim, E., Panaritis, C., Li, L. Z., Ntumba Kabongo, E., Lavigne, L., Abanobi, E. A., Ragab, A., Patience, G. S., & Boffito, D. C. (2025). Ultrasound accelerates zeolite synthesis: Predictive modelling via machine learning. Journal of environmental chemical engineering, 13(6), 120180 (16 pages). Lien externe
Brassard, D., Karthikeyan, A., & Tavares, J. R. (2025). Natural wax supported by microporous biochar to create a stable phase change material. The Canadian Journal of Chemical Engineering. Lien externe
Brucel, C., Thibault, É., Patience, G. S., & Stuart, P. R. (2025). Experimental methods in chemical engineering–Validation of steady‐state simulation. Canadian Journal of Chemical Engineering, 25601 (20 pages). Disponible
Cantin, J., Farand, P., & Tavares, J. R. (2025). Integrating Oral Assessment in Engineering. SEFI Journal of Engineering Education Advancement, 2(1), 121-141. Lien externe
Chevrier, A., & Lavertu, M. (2025). Impact of BMI and PRP Platelet and Red Blood Cell Content on the Coagulation Kinetics of Ortho-R/PRP Mixtures. Polymers, 17(11), 1515 (13 pages). Disponible
Chevrier, A., Wang, D., Ladd, E., Blais, J.-S., & Lavertu, M. (2025). Chitosan powders and Ortho-R, a chitosan-containing finished product, are stable long term when stored in proper conditions. Carbohydrate Polymer Technologies and Applications, 10, 100777 (12 pages). Disponible
Cicoira, F. (2025). (Invited) Reusable Self-Healing Electronics. Meeting abstracts/Meeting abstracts (Electrochemical Society. CD-ROM), MA2025-01(33), 1635 (1 page). Lien externe
Collard-Daigneault, A., Vidal, D., Bertrand, F., & Blais, B. (2025). Enhancing the computational performance of granular flow simulations in DEM and CFD-DEM with adaptive sparse contacts (ASC). Powder Technology, 452, 120530 (16 pages). Accès restreint
Corella-Puertas, E., Saadi, N., Gallato, M., Fröhling, M., & Boulay, A.-M. (septembre 2025). Plastic footprint: definition and operationalization [Résumé]. 12th International Conference on Life Cycle Management (LCM 2025), Palermo, Italy. Lien externe
Cruzado, G. M., Marion, A., Harvey, E. J., & Merle, G. (2025). Nanoengineered diagnostic surface for efficient detection of MMP1 cancer biomarkers. Sensing and Bio-Sensing Research, 100761. Lien externe
Dal, P., Jean-Fulcrand, A., Lévêque, J.-M., Raquez, J.-M., & Boffito, D. C. (2025). Ultrasound-assisted esterification of cotton cellulose with long chain free fatty acids. Cleaner Chemical Engineering, 12, 100209 (15 pages). Lien externe
Dal, P., Kring, J., Schieppati, D., & Boffito, D. C. (2025). Numerical simulation of a continuous sonoreactor for cotton cellulose residues recovery. Ultrasonics Sonochemistry, 120, 107418 (11 pages). Disponible
Davari, N., Pasikhani, J. V., Bianchi, C. L., Yargeau, V., & Boffito, D. C. (2025). Recent progress on Ti-based piezo-photocatalysts for wastewater treatment. Current Opinion in Chemical Engineering, 47, 101090-101090. Lien externe
Davari, N., Vahabzadeh Pasikhani, J., Hamoud, H., Falletta, E., Bianchi, C. L., Yargeau, V., & Boffito, D. C. (2025). Enhanced Photo-Induced Charge Generation of Floating Sulfur-Doped TiO₂ Double-Walled Nanotubes for Efficient Sunlight-Driven Photocatalytic Degradation of Bisphenol A. Ceramics International. Lien externe
De Bortoli, A., Chanel, A., Chabas, C., Greffe, T., & Louineau, E. (2025). More rationality and inclusivity are imperative in reference transition scenarios based on IAMs and shared socioeconomic pathways - recommendations for prospective LCA. Renewable and Sustainable Energy Reviews, 222, 115924 (14 pages). Lien externe
de Oliveira Campos, V., Barbosa, F. F., de Morais, E. K. L., Melo, D. M. A., De Jesus Santana, J., & Patience, G. S. (2025). Experimental methods in chemical engineering: Electron probe micro‐analysis—EPMA. Canadian Journal of Chemical Engineering, 103(7), 3000-3011. Disponible
de Oliveira Cremonezzi, J. M., Pinto, G. M., Nascimento Pereira, N., Mincheva, R., Andrade, R. J. E., Raquez, J.-M., & Fechine, G. J. M. (2025). Improving the Performance of a Ballistic Protection Composite with Either Graphene Oxide or Molybdenum Disulfide. ACS Omega, 10(46), 56032-56045. Lien externe
De Tommaso, J., Galli, F., Nguyen, T. D., Zhuang, Y., Dubois, J.-L., & Patience, G. S. (2025). Waste artificial marble pyrolysis and hydrolysis. Waste Management, 195, 129-144. Lien externe
De Tommaso, J., Patience, G. S., & Dubois, J.-L. (2025). Recycling of artificial marble. Dans PMMA Circularity Roadmap - Industrial Practice and Academic Insight (p. 197-222). Lien externe
Delattre, L. (2025). Conception de moules polymères hydrosolubles pour la préparation d'hydrogels macroporeux servant de pièges à cellules cancéreuses résiduelles du glioblastome multiforme [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Delattre, L., Lassus, A., De Crescenzo, G., Faucheux, N., Lauzon, M.-A., Paquette, B., Girard, M., & Virgilio, N. (2025). Thermally Sensitive and Tunable Water-Soluble Polymer Molds for the Preparation of Porous Hydrogels. Polymer, 128695. Lien externe
Delvaux, M. E. M., Chevrier, A., Sim, S., Quenneville, É., Hurtig, M., De Crescenzo, G., & Lavertu, M. (2025). Chitosan/Platelet‐Rich Plasma Implants in an Ovine Arthroscopic Model of Meniscus Repair. Journal of Orthopaedic Research®. Lien externe
Derakhshankhah, M., Gilani, N., & Vahabzadeh Pasikhani, J. (2025). Synergizing S-Scheme Charge Transfer and Fenton Reactions via FeS₂-anchored Ti₃C₂Tₓ MXene Heterojunction for Efficient Round-the-clock Photocatalytic Wastewater Treatment. Journal of Alloys and Compounds, 1039, 183325 (20 pages). Lien externe
Devaux, T. (2025). Vers une nouvelle approche CALPHAD du magnétisme dans les métaux et alliages [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Dhara, S., & Baite, T. N. (2025). Alkali Lignin: Extraction. Dans Jawaid, M., Ahmad, A., & Meraj, A. (édit.), Handbook of Lignin (p. 1-32). Lien externe
Djogap Feujo, C. J., & Chioua, M. (juin 2025). Early fault diagnosis in chemical processes through multistep multivariable prediction [Communication écrite]. 14th IFAC Symposium on Dynamics and Control of Process Systems, including Biosystems (DYCOPS 2025), Bratislava, Slovakia. Publié dans IFAC-PapersOnLine, 59(6). Lien externe
Dsouza, K. B., Ofosu, E., Salkeld, J., Boudreault, R., Moreno-Cruz, J., & Leonenko, Y. (2025). Assessing the climate benefits of afforestation in the Canadian Northern Boreal and Southern Arctic. Nature Communications, 16, 1964 (19 pages). Disponible
Ebrahimi, S., & Cicoira, F. (2025). Electrodeposition of PEDOT on Semi-Spherical PCBs for Enhanced Arthroscopy Probes. Meeting abstracts/Meeting abstracts (Electrochemical Society. CD-ROM), MA2025-01(25), 3128 (1 page). Lien externe
Ebrahimi, S., Khoomortezaei, S., Fan, J., Dongnang Ngoula, K. C., Garon, M., Quenneville, É., & Cicoira, F. (2025). Conducting Polymer Coatings for Bioelectronic Arthroscopy Probes. Advanced Healthcare Materials, e02269. Lien externe
Ebrahimi, S., Rönnqvist, M., Ouhimmou, M., & Stuart, P. R. (2025). A systematic literature review of the logistics planning for sustainable bioenergy based on Forestry, Agricultural, and municipal solid waste value chains. Energy Conversion and Management X, 27, 101105 (24 pages). Lien externe
Elkadiri, C., Bouziani, I., Ait Ousaleh, H., Naji, M., Chaouki, J., Abbas, G., & Faik, A. (2025). A computational study of Fe₃CuN and Fe₃ZnN antiperovskite nitrides for chemical looping ammonia synthesis. International Journal of Hydrogen Energy, 111, 623-634. Lien externe
Elnegoumy, M., Dubois, C., Comtois, É., & Elbeih, A. (mai 2025). Microreactor Based Flow Synthesis of 3-Nitro-1,2,4-triazol-5-one: A Novel Approach for Low-Sensitivity High Explosive [Communication écrite]. 13th International Conference on Chemical and Environmental Engineering (ICEE-13), Cairo, Egypt (7 pages). Publié dans International Conference on Chemical and Environmental Engineering, 13(13). Lien externe
Farand, P., Arzate, A., Vézina, K., & Tavares, J. R. (juin 2025). A Knowledge-Base for Engineering - Benefits and Lessons Learned Using a Concept Inventory [Communication écrite]. Canadian Engineering Education Association (CEEA), Montreal, Qc, Canada (5 pages). Publié dans Proceedings of the ... CEEA Conference. Lien externe
Farzad Baniahmad, S., Burlacu, A., Delafosse, L., Acchione, M., Simmons, M., Ling, B., Iqbal, U., Moreno, M., De Crescenzo, G., & Durocher, Y. (2025). Use of Coiled-Coil Affinity Peptides to Manufacture Antibody Conjugates. PubMed. Lien externe
Ferreiro Gonzalez, M. (2025). Solvothermal Debromination of Commercial End-of-Life Styrenic Polymer (ABS and HIPS) [Thèse de doctorat, Polytechnique Montréal]. Disponible
Ferreiro Gonzalez, M., Cabañas-Gac, F., & Patience, G. S. (2025). Alkaline Solvothermal Debromination of Commercial Brominated Polystyrene. Recycling, 10(3), 105 (22 pages). Disponible
Filahi, I., Assen, A. H., Belmabkhout, Y., & Chaouki, J. (2025). Passive Adsorptive Direct air capture (PADAC) using a Nature-assisted temperature Swing Process: A sustainable solution for residential CO₂ emissions. Energy Conversion and Management, 338, 119925 (19 pages). Lien externe
Filahi, I., Assen, A. H., Chaouki, J., & Belmabkhout, Y. (2025). Solid physisorbent-based direct air capture: A regeneration-focused review of processes, sorbent suitability, and energy trade-offs [Commentaire ou lettre]. Chemical Engineering Journal, 167384. Lien externe
Filion, R., St-Georges-Robillard, A., Chaudoir, H., Ritch, S., Mes-Masson, A.-M., Ajji, A., & Gervais, T. (2025). Dataset for the publication "Mass fabrication of PDMS microfluidic devices by injection molding and applications in sensitive 3D spheroid and explant" [Ensemble de données]. Lien externe
Filion, R., St-Georges-Robillard, A., Chaudoir, H., Ritch, S., Ndongo, M., Ying Chua, X., Laurent, E., Mes-Masson, A.-M., Ajji, A., & Gervais, T. (2025). Mass fabrication of PDMS microfluidic devices by injection molding and applications in sensitive 3D spheroid and explant culture. Scientific Reports, 15(1), 33218 (13 pages). Lien externe
Filippini, A., Zhang, H., Zadory, M., Rabanel, J.-M., Thang Phan, Q., Passos Gibson, V., Robert, J., Hardy, P., Boffito, D. C., Brambilla, D., & Banquy, X. (2025). Design and Evaluation of Cationic Bottlebrush Polymers for Advanced Messenger RNA Therapeutics. Acta Biomaterialia. Lien externe
Fontaine, L., Legros, R., & Frayret, J.-M. (2025). Assessing the effect of environmental attitudes on waste material flow quality through agent-based modelling of citizen source separation behaviour. Journal of Environmental Management, 384, 125553 (11 pages). Lien externe
Fries, L. R., Khaled, N., Viveros Santos, I., Suniega-Tolentino, E., Sesing, M., Toh, M. P. S., Yang, C. Y., Chan, S.-Y., & Mottaz, S. C. (2025). Decentralized clinical trials are better for the participants and for the planet: the case study of a double-blind randomized controlled trial in Singapore (PROMOTE study). Frontiers in Public Health, 12, 14 pages. Disponible
Fuoco, D. (2025). The stealth effect from a medicinal chemist perspective: definition and updates. Frontiers in Drug Delivery, 5, 8 pages. Disponible
Gancheva, T. P., Moraille, P., & Favis, B. D. (2025). Multiphase morphology control as a robust route to recycling mixed plastic waste. Polymer, 129184. Lien externe
Gareau-Lajoie, A. (2025). Développement de capteurs virtuels à base de réseaux de neurones récurrents pour un four pilote de réduction d'ilménite [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Ghattas, M., Chevrier, A., Wang, D., Alameh, M.-G., & Lavertu, M. (2025). Reducing endotoxin contamination in chitosan: an optimized purification method for biomedical applications. Carbohydrate Polymer Technologies and Applications, 10, 100797 (9 pages). Disponible
Ghattas, M., Dwivedi, G., Chevrier, A., Horn-Bourque, D., Alameh, M.-G., & Lavertu, M. (2025). Chitosan immunomodulation: insights into mechanisms of action on immune cells and signaling pathways. RSC Advances, 15(2), 896-909. Disponible
Ghattas, M., Dwivedi, G., Chevrier, A., Scobey, T., El-Mayta, R., Mattocks, M. D., Wang, D., Lavertu, M., & Alameh, M.-G. (2025). Comparative Analysis of Chitosan, Lipid Nanoparticles, and Alum Adjuvants in Recombinant SARS-CoV-2 Vaccine: An Evaluation of Their Immunogenicity and Serological Efficacy. Vaccines, 13(8), 788-788. Lien externe
Goudarzi, A., Karami, T., Abdelamir Mohammad, H., Akrami, M., Mohammadi, S., & Haririan, I. (2025). Dual Extrusion-based 3D-Printed Core–Shell Tablets for Colorectal Delivery of Mebeverine Hydrochloride. Drug Development and Industrial Pharmacy, 42 pages. Lien externe
Guérette, C.-D., Panaritis, C., Pahija, E., Couillard, M., Patarachao, B., Shadbahr, J., Bensebaa, F., Patience, G. S., & Boffito, D. C. (2025). Cu on Co Improves C₅₊ Selectivity in the Fischer–Tropsch Synthesis. Industrial & Engineering Chemistry Research, 64(19), 9542-9557. Lien externe
Guerrero-Pérez, M. O., Eran, T. N., & Patience, G. S. (2025). Experimental methods in chemical engineering: Electrospinning. The Canadian Journal of Chemical Engineering. Lien externe
Guévremont, O., Barbeau, L., Moreau, V., Galli, F., Virgilio, N., & Blais, B. (2025). Robust pore-resolved CFD through porous monoliths reconstructed by micro-computed tomography: From digitization to flow prediction. Chemical Engineering Journal, 504, 158577 (17 pages). Disponible
Hagler, J. (2025). Electrodeposition of PEDOT on Linear and Curved Intracerebral Probes for Improved Neural Recording and Stimulation [Thèse de doctorat, Polytechnique Montréal]. Disponible
Hajjar, C., Bulle, C., Agez, M., Corella-Puertas, E., & Boulay, A.-M. (2025). Identifying influencing physical and environmental parameters on fate and characterization factors for microplastic emissions in the marine environment. The International Journal of Life Cycle Assessment, 21 pages. Lien externe
Harvey, J.-P. (juillet 2025). On the path to decarbonization: integration of green hydrogen in pyrometallurgy [Résumé]. H₂ Excellence Workshop 2025, Montréal, Québec. Lien externe
Harvey, J.-P., Ait-Amer, D., Poëti, K., & Oishi, K. (mars 2025). Thermodynamic-Based Process Simulation Coupled to Life Cycle Analysis: Exploring Pyrometallurgical Processes to Recycle End-of-Life Products [Communication écrite]. REWAS Conference 2025, Las Vegas, NV, USA. Publié dans The minerals, metals & materials series. Lien externe
Houle, C., Habboubi, R., Tully, J., & Hounkpatin, M.-A. (juillet 2025). Safer Hydrogen Transportation through Liquid Organic Hydrogen Carriers (LOHCs) [Résumé]. H₂ Excellence Workshop 2025, Montréal, Québec. Lien externe
Hussain, A., Monzavi Chaleshtari, M. H., & Chaouki, J. (2025). Investigating reaction rates in microwave heating-assisted methane pyrolysis. Chemical Engineering Science, 321, 123027 (12 pages). Lien externe
Jaber Darabi Mahboub, M., Xu, J.-H., Patience, G. S., & Dubois, J.-L. (2025). Conversion of glycerolglycerol and bio-renewable carbon to acrylic acidacrylic acid. Dans Kaliaguine, S., & Dubois, J.-L. (édit.), Industrial Green Chemistry (p. 1-40). Lien externe
Jafari, A., Bhatt, K., Niknezhad, S. V., Ajji, A., Griffith, M., Andelfinger, G., Bencherif, S. A., & Savoji, H. (2025). Synthesis and characterization of photo-cross-linkable quince seed-based hydrogels for soft tissue engineering applications. Carbohydrate Polymers, 352, 123140 (13 pages). Disponible
Kaddoura, M., Majeau-Bettez, G., Amor, B., & Margni, M. (2025). Global sensitivity analysis reduces data collection efforts in LCA: A comparison between two additive manufacturing technologies. Science of the Total Environment, 975, 179269 (11 pages). Disponible
Karami, T., Akrami, M., Haririan, I., Mohammadi-Khanaposhti, M., & Sajedi, R. H. (2025). Pharmaceutical additive manufacturing of a pH-responsive core-shell tablet of beta-galactosidase to treat lactase intolerance. DARU Journal of Pharmaceutical Sciences, 33(2). Lien externe
Khajouei, M., Singh, B. K., Latifi, M., & Chaouki, J. (2025). Thermodynamic and experimental insights toward an eco-friendly phosphorus production. Cleaner Engineering and Technology, 101092. Lien externe
Khani, Z., Brinkerhoff, J., & Patience, G. S. (2025). Hydrodynamic and temperature profile analysis in a gas-solid fluidized bed with liquid atomization to convert fructose to value-added chemicals. Chemical Engineering Science, 302, 12 pages. Lien externe
Khani, Z., Porte, M., Brinkerhoff, J., & Patience, G. S. (2025). Coke evolution study in a liquid atomization into gas-solid fluidized bed to convert fructose to value-added chemicals. Catalysis Today, 444, 114972 (11 pages). Lien externe
Khodabandehloo, M., Shabanian, J., Harvey, J.-P., & Chaouki, J. (2025). A Novel Microwave Heating-Assisted Reactor for Industrial-Scale Syngas Production. Renewable Energy, 252, 123453 (14 pages). Lien externe
Khoomortezaei, S., & Cicoira, F. (2025). Self-Healing Solid Polymer Electrolyte Based on Polyurethane Toward Li Metal Batteries. Meeting abstracts/Meeting abstracts (Electrochemical Society. CD-ROM), MA2025-01(3), 250 (1 page). Lien externe
Khoshoei, A., Mokhtarifar, M., Fazeli, S., Jean-Fulcrand, A., & Boffito, D. C. (2025). Crown Ethers in the Group and Individual Separation of Rare-Earth Elements through Solvent Extraction: Interactions, Thermodynamics, and Applications. Industrial & Engineering Chemistry Research, 64(25), 12347-12367. Lien externe
Kibret, H. A., Shabanian, J., Mokhtari, M., Zarghami, R., & Chaouki, J. (2025). Modeling of direct Joule-heated fluidized bed steam methane reformer. Energy Conversion and Management, 345, 120375 (21 pages). Lien externe
Kibret, H., Vahabzadeh Pasikhani, J., Adavi, K., Shabanian, J., Mostoufi, N., & Chaouki, J. (2025). Novel thermal approaches for hydrogen production. Dans Merouani, S., & Hamdaoui, O. (édit.), Hydrogen Production, Storage and Utilization (p. 55-132). Lien externe
Kibret, H., Vahabzadeh Pasikhani, J., Hussain, A., Khodabandehloo, M., Vatankhah, F., Shabanian, J., & Chaouki, J. (2025). Novel Electrified Thermal Hydrogen Production Approaches. Renewable Energies, Environment and Power Quality Journal, 3(1), 53-59. Lien externe
Kim, C., Kim, J., Fan, J., Wang, M., & Cicoira, F. (2025). Recyclable printed liquid metal composite for underwater stretchable electronics. Small Science, 5(5), 2400553 (10 pages). Disponible
Klassen, D., Karthikeyan, A., Simon, W., Mimoso, C., Badiali, T., Chouinard, G., Dumont, M.-J., & Tavares, J. R. (2025). A scalable post-treatment method for modifying polylactic acid to create nanoporous polymers. Polymer, 330, 128495 (18 pages). Disponible
Koushanpour, A., Harvey, E. J., & Merle, G. (2025). Multi-labeling strategy to enhance direct aptamer sensor sensitivity for detecting MUC1 tumor marker. Sensing and Bio-Sensing Research, 49, 100833 (8 pages). Lien externe
L'Haridon, J., Patouillard, L., Pedneault, J., Boulay, A.-M., Witte, F., Vargas-Gonzalez, M., Bonningue, P., Rollat, I., Blanchard, T., Gonçalves, G., Hervio, A., & Gilbert, L. (2025). Correction: L'Haridon et al. SPOT: A Strategic Life-Cycle-Assessment-Based Methodology and Tool for Cosmetic Product Eco-Design. Sustainability 2023, 15, 14321. Sustainability, 17(12), 5414-5414. Lien externe
Laasri, F., Mostoufi, N., Carrillo Garcia, A., & Chaouki, J. (2025). Simulation of a bubbling fluidized bed reactor for phosphogypsum decomposition with carbon monoxide. The Canadian Journal of Chemical Engineering, 13 pages. Lien externe
Lacoursiere, J.-P. (juillet 2025). H₂ Process Safety Management [Résumé]. H₂ Excellence Workshop 2025, Montréal, Québec. Lien externe
Lafaye, P., Jofré, J., & Harvey, J.-P. (2025). Thermodynamic behavior of the τ₁₁-Al₄ Fe₁.₇Si solid solutions from 0 K to 1270 K. Journal of Solid State Chemistry, 346, 125257 (8 pages). Disponible
Lassus, A., Therriault, D., Favis, B. D., & Virgilio, N. (2025). Tailoring the morphology in partially and fully miscible mixtures of PEEK and PEI. Polymer, 326, 128315 (15 pages). Disponible
Latifi, M. (juillet 2025). Thermodynamic optimization of syngas production from bio-oil via combined steam reforming and partial oxidation [Résumé]. H₂ Excellence Workshop 2025, Montréal, Québec. Lien externe
Laviolette, J.-P., Eslami, A., & Doucet, J. (2025). Membrane-based nanopurification for plastic recycling. Communications Chemistry, 8(1). Lien externe
Lecointre, S., Lavoie, J., Boulay, A.-M., & Bulle, C. (septembre 2025). Evaluating the relative contribution of polymers and chemical additives in the environmental profile of plastic items [Résumé]. 12th International Conference on Life Cycle Management (LCM 2025), Palermo, Italy. Lien externe
Lemire, L. (2025). Process Intensification and Scale-Up of Chinese Hamster Ovary Cell Cultures in Bioreactor for the Production of Recombinant Proteins [Thèse de doctorat, Polytechnique Montréal]. Disponible
Lemire, L., Reyes Davila, J. S., Durocher, Y., Voyer, R., Henry, O., & Lan Pham, P. (2025). Scale‐up of a monoclonal antibody CHO fed‐batch production in stirred tank bioreactors: Effect of hydrodynamic conditions and feeding regimen. Biotechnology Progress. Lien externe
Lemire, L., Reyes Davila, J. S., Durocher, Y., Voyer, R., Henry, O., & Pham, P. L. (2025). N‐1 semi‐continuous transient perfusion in shake flask for ultra‐high density seeding of CHO cell cultures in benchtop bioreactors. Biotechnology Progress, 41(5), e70029 (14 pages). Disponible
Lourioux, M. C. J. (2025). L'exergie : une illusion ou une révolution dans l'évaluation des impacts ? Analyse du potentiel de l'exergie comme indicateur thermodynamique de l'impact de l'utilisation des ressources [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Maga, D., Vázquez-Rowe, I., Verones, F., Boulay, A.-M., Corella-Puertas, E., & Askham, C. (2025). Consideration of Plastic Emissions in Life Cycle Assessments. Dans Buettner, A., & Weidner, E. (édit.), Springer Handbook of Circular Plastics Economy (p. 831-852). Lien externe
Magnaval, G., & Boulay, A.-M. (2025). Development of an analytical model of automobile energy consumption during use-phase for parametrized life cycle assessment. Renewable and Sustainable Energy Reviews, 217, 115716 (16 pages). Lien externe
Magnaval, G., & Boulay, A.-M. (2025). PETRAUL / Development of an Analytical Model of Automobile Energy Consumption During Use-Phase for Parametrized Life Cycle Assessment [Ensemble de données]. Lien externe
Magnaval, G., Margni, M., & Boulay, A.-M. (septembre 2025). An LCI-based decomposition analysis to assess consumer behavior mitigations and propose demand-side strategies for the car mobility sector: the case of Switzerland [Résumé]. 12th International Conference on Life Cycle Management (LCM 2025), Palermo, Italy. Lien externe
Majeau-Bettez, G., & De Wachter, H. (2025). Adjustments to reduce mass imbalances in Ecoinvent v3.10. [Ensemble de données]. Lien externe
Martín, R. G., Jonasson, C., Johansson, C., Tavares, J. R., & Dubé, M. (2025). 3D-printing magnetic susceptor filament for induction welding of thermoplastic composite sandwich panels. Composites Communications, 55, 102321 (11 pages). Disponible
Marvi, Z., Raphael, Y., Job, D., Cruzado, G. M., & Merle, G. (2025). Virulent factor‐targeted point‐of‐care biosensor for detection of Staphylococcus aureus infections. Advanced Sensor Research, 4(4), 2400153. Disponible
Mawe Noussi, C. (2025). Stabilité du PEDOT:PSS sous l'application de potentiels élevés dans divers environnements (sec, aqueux et non aqueux) pour une application potentielle en électroporation [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Metayer, I., Forest-Nault, C., Guimond, J., Joubert, S., Henry, O., Durocher, Y., De Crescenzo, G., & Gaudreault, J. (2025). A Surface Plasmon Resonance‐Based Integrated Assay for Quantification and Glycosylation Characterization of Monoclonal Antibodies in Crude Heterogeneous Samples. Biotechnology and Bioengineering, 15 pages. Lien externe
Mihin, T., Savadogo, O., & Tartakovsky, B. (2025). Impact of non-noble bimetallic oxides on bioelectrochemical reduction of carbon dioxide to volatile fatty acids. Process Biochemistry, 159, 51-63. Lien externe
Milano, F., Chevrier, A., De Crescenzo, G., & Lavertu, M. (2025). Title Freeze-Dried Chitosan-Thrombin-Platelet-Rich Plasma Implants Improve Supraspinatus Tendon Regeneration in a Rabbit Rotator Cuff Repair Model. ACS Biomaterials Science & Engineering. Lien externe
Mincheva, R., Odent, J., Ben Abdeljawad, M., Brandenbourger, M., Lambert, P., & Raquez, J.-M. (2025). 3D-printed gradient-like poly(L,L-lactide)-based auxetic materials for bone regeneration applications. Progress in Additive Manufacturing, 10 pages. Lien externe
Mirakhori, G., Doucet, J., Chidami, S., Blais, B., & Chaouki, J. (2025). AI-enhanced radioactive particle tracking: A practical methodology for accelerating industrial process development. Chemical Engineering Science, 318, 122173 (9 pages). Accès restreint
Mokhtari, M., Shabanian, J., & Chaouki, J. (2025). Methane dry reforming in a microwave heating-assisted dense fluidized bed. Powder Technology, 449, 10 pages. Lien externe
Monroy, L. H., Tavares, J. R., & Dumont, M.-J. (2025). Application of photocatalytic hydrogels used for the degradation of dyes, pharmaceuticals and other contaminants in water [Commentaire ou lettre]. Adsorption, 31(3), 27 pages. Lien externe
Monroy, L. H., Tavares, J. R., & Dumont, M.-J. (2025). Photodegradation of ciprofloxacin using an alginate/TiO2 hydrogel for water remediation. Journal of Environmental Chemical Engineering, 13(2), 115868 (14 pages). Disponible
Moufakkir, F. Z. (2025). Modèle thermodynamique et d'équilibres de phases pour un flux salin chloro-fluoré utilisé dans le traitement des métaux et le recyclage des alliages d'aluminium [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Moustaine, Z., Sulmoni, E., De Crescenzo, G., Liberelle, B., Saleh, W., Leclerc, G. J., Kadem, L., Zenses, A.-S., & Tournoux, F. (2025). Valves in pulmonary veins: New approach for the heterotopic treatment of mitral regurgitation. Archives of cardiovascular diseases, 118(6-7), S211-S212. Lien externe
Munro, T., Chiu, R., Rose, M. A., Beneš, O., Boča, M., Gardner, D. N., Leong, A., Mastromarino, S., Pamplin, K. L., Piro, M. H. A., Saoudi, M., Schorne-Pinto, J., Michael Sclafani, C., Smith, A. L., Smith, N. D., Sulejmanovic, D., Berry, A. M., Chen, R., Man Chung, K., ... Scarlat, R. O. (2025). Round Robin Measurements of Molten Salt Properties for LiF-NaF-KF (FLiNaK) and NaCl-KCl Mixtures. Journal of Chemical & Engineering Data. Lien externe
Nguyen, T. D., Saadatkhah, N., Zhuang, Y., De Tommaso, J., Stoeffler, K., Faye, A., & Patience, G. S. (2025). Thermal degradation of impact‐modified PMMA in mechanical and chemical recycling. The Canadian Journal of Chemical Engineering. Lien externe
NiNi, Z., Sharafi Zamir, S., Tojiyev, R., Mamirov, A., Khamrakulova, M., Karimov, Y., Tursunov, K., Kosimov, L., & Faraji, M. (2025). Electrospun MXene–Sericin nanofibers for carbonated recycled aggregates: Toward intelligent, durable, and low-carbon cementitious composites. Materials Today Communications, 47, 113221 (16 pages). Lien externe
Nong, Y., Patouillard, L., Majeau-Bettez, G., & Ciari, F. (2025). Material efficiency for transport decarbonization: a case study of carsharing in Montreal. Transportation Research Part D: Transport and Environment, 149, 105037 (15 pages). Accès restreint
Oliveira Ferreira, V., Hamel, A., Mainville, W., Raymond, V., Lamarre, J.-M., Vaillant, M., Chioua, M., & Blais, B. (2025). Active cooling device: a flexible experimental unit to test active cooling control strategies [Ensemble de données]. Lien externe
Ospital, L. A. N., Margni, M., & Boulay, A.-M. (2025). Development of a Parametrized and Regionalized Life Cycle Inventory Model for Tire and Road Wear Particles. Journal of Hazardous Materials, 495, 138986. Lien externe
Panaritis, C. (juillet 2025). Carbon Exel - Startup [Résumé]. H₂ Excellence Workshop 2025, Montréal, Québec. Lien externe
Patience, N. A., Jensen, H. M., Banquy, X., & Boffito, D. C. (2025). Microwave-assisted poly(D,L-lactide) synthesis in toluene and tetrahydrofuran. Journal of Advanced Manufacturing and Processing, 7(2), 12 pages. Disponible
Patience, N. A., Thang Phan, Q., Sanchez, A. M., Jean-Fulcrand, A., Banquy, X., & Boffito, D. C. (2025). Continuous nanoprecipitation of poly(D,L-lactide) in a rotor–stator spinning disk reactor. Chemical Engineering and Processing - Process Intensification, 219, 110572 (12 pages). Lien externe
Patience, P. A. (2025). Results of paper "Cesogen: Cellular solid generator" [Ensemble de données]. Lien externe
Patience, P. A., Audet, C., & Blais, B. (2025). Cesogen: cellular solid generator. Science and Technology of Advanced Materials Methods, 46 pages. Lien externe
Pellan, M. (2025). MetalliCan [Ensemble de données]. Lien externe
Pellengahr, F., Corella-Puertas, E., Mattelin, V., Saadi, N., Bertella, F., Boulay, A.-M., & van der Meer, Y. (2025). Modeling marine microplastic emissions in life cycle assessment: characterization factors for biodegradable polymers and their application in a textile case study. Frontiers in Toxicology, 7, 19 pages. Disponible
Pimenta, M. S. S., Lebreux Désilets, F., Mariano, A. P., Chambost, V., Boutet, A., & Stuart, P. R. (2025). Competitive assessment of biofuel strategies for a case study in eastern Canada: techno‐economic and multi‐criteria decision‐making analysis. Biofuels Bioproducts and Biorefining. Lien externe
Poëti, K., Castillo-Sánchez, J.-R., Mahue, U. M. D., Rioux-Frenette, V., Squalli Houssaini, Z., Oishi, K., & Harvey, J.-P. (2025). The power of computational thermochemistry in high-temperature process design and optimization: Part 2 – Pyrometallurgical process modeling using FactFlow. Calphad, 88, 102772 (18 pages). Disponible
Ponton, S., Brassard, D., Sanchez Rendon, A. F., Alavitabari, S., Boudreault, R., Bédard, É., Girard-Lauriault, P.-L., & Tavares, J. R. (2025). A Guideline to Evaluate Sorbent Performance for Atmospheric Water Harvesting. Advanced Energy and Sustainability Research, e202500258. Lien externe
Ponton, S., Salvi, T. C., Girard-Lauriault, P.-L., & Tavares, J. R. (2025). Fast Kinetics Biosourced Carbon-Based Sorbents for Atmospheric Water Harvesting. ACS Sustainable Chemistry & Engineering. Lien externe
Prieto Saavedra, L. (2025). Development of an Efficient Stabilized Navier-Stokes Solver to Simulate Turbulent Flows in Process-Intensified Devices [Thèse de doctorat, Polytechnique Montréal]. Disponible
Prieto Saavedra, L., Archambault, J., Münch, P., & Blais, B. (2025). An implicit large-eddy simulation study of the turbulent Taylor-Couette flow with an inner rotating cylinder. Journal of Turbulence, 15 pages. Accès restreint
Prieto Saavedra, L., Münch, P., & Blais, B. (2025). A matrix-free stabilized solver for the incompressible Navier-Stokes equations. Journal of Computational Physics, 538, 114186 (24 pages). Accès restreint
Reyes Davila, J. S., Voyer, R., Durocher, Y., Henry, O., & Lan Pham, P. (2025). A recurrent neural network for soft sensor development using CHO stable pools in fed‐batch process for SARS‐CoV‐2 spike protein production as a vaccine antigen. Biotechnology Progress, 41(5), e70046 (20 pages). Disponible
Reyes, S.-J., Lemire, L., Durocher, Y., Voyer, R., Henry, O., & Pham, P. L. (2025). Investigating the metabolic load of monoclonal antibody production conveyed to an inducible CHO cell line using a Transfer-Rate Online Monitoring system. Journal of Biotechnology, 36 pages. Lien externe
Rhouma, A., Seitfudem, G. A., El Jeitany, J., Pacetti, T., Brouwer, F., & Gil, J. M. (2025). Connecting the water footprint with the water-energy-food-ecosystems Nexus concept and its added value in the Mediterranean. Environmental and Sustainability Indicators, 26, 100640 (14 pages). Disponible
Rivera Quintero, P. A., Guerrero-Pérez, M. O., Rodríguez-Castellón, E., & Patience, G. S. (2025). Sn-Silica catalyzes cheese whey to lactic acid in a fluidized bed reactor. Catalysis Today, 115286. Lien externe
Robert, J., Chauhan, D. S., Cherifi, K., Thang Phan, Q., Sangwan, V., De Crescenzo, G., & Banquy, X. (2025). Hybrid Nanocarrier Delivers Immuno-Photothermal Therapy to Modulate Pancreatic Tumor Microenvironment. ACS Applied Bio Materials, 8(6), 5239-5251. Lien externe
Rocha, F. S., Avila, P. R. T., Touré, O., Azzi, M., Khelfaoui, F., Vernhes, L., Patience, G. S., Sapieha, J.-E., & Martinu, L. (2025). Enhanced heavy oil fouling resistance of cobalt-based spray-deposited coatings by alloy design and heat treatment. Surface & Coatings Technology, 495, 12 pages. Lien externe
Rognan, M. S., Margni, M., & Majeau-Bettez, G. (2025). SSELF: A Specific SEmiautomated Lifecycle Footprinting framework to go beyond generic data in LCA. Journal of Industrial Ecology, 17 pages. Lien externe
Roohollahi, G., & Latifi, M. (2025). Thermodynamic optimization of syngas production via auto-thermal oxidative steam reforming of bio-oil. International Journal of Hydrogen Energy, 189, 152137 (16 pages). Lien externe
Roy, S., Moustafa, H., Vaidya, K., Harvey, J.-P., & Fradette, L. (2025). Erratum: Improving process granularity of life cycle inventories for battery grade nickel. npj Materials Sustainability, 3(1), 2 pages. Lien externe
Roy, S., Moustafa, H., Vaidya, K., Harvey, J.-P., & Fradette, L. (2025). Improving process granularity of life cycle inventories for battery grade nickel. npj Materials Sustainability, 3, 15 (16 pages). Disponible
Roy, S., Vaidya, K., & Fradette, L. (septembre 2025). A framework for prospective life cycle assessment of upstream material supply chains [Résumé]. 12th International Conference on Life Cycle Management (LCM 2025), Palermo, Italy. Lien externe
Ruqun Wu, S., De Bortoli, A., & Bulle, C. (2025). A review of current state-of-the-art road vehicle life cycle assessment tools [Commentaire ou lettre]. Journal of Cleaner Production, 522, 146278. Lien externe
Saadi, N., Lavoie, J., Fantke, P., Redondo-Hasselerharm, P. E., & Boulay, A.-M. (2025). Including impacts of microplastics in marine water and sediments in life cycle assessment. Journal of Cleaner Production, 520, 146037 (13 pages). Lien externe
Sacchi, R., José Hahn Menacho, Á., Seitfudem, G. A., Agez, M., Schlesinger-Martinat, J., Koyamparambath, A., Santillán-Saldivar, J., Loubet, P., & Bauer, C. (2025). Contextual LCIA without the overhead: an exchange-based framework for flexible impact assessment. The International Journal of Life Cycle Assessment, 15 pages. Lien externe
Sadeghi, A., Abavisani, F., Saffar, A., & Ajji, A. (2025). Improving paper-based packaging with home compostable modified starch coatings: a focus on heat seal optimization. Journal of Environmental Management, 386, 125639 (11 pages). Disponible
Safaei, M. (2025). Development of a Gaseous Chlorine Dioxide Sustained Controlled Release System as a Form of Active Food Packaging [Thèse de doctorat, Polytechnique Montréal]. Disponible
Saghaei, M. (2025). Development of Solid-Stabilized High Internal Phase Emulsions for Sound Absorbing Porous Materials [Thèse de doctorat, Polytechnique Montréal]. Disponible
Saghaei, M., Fotsing, E. R., Ross, A., & Fradette, L. (2025). Scale-up High Internal Phase Pickering Emulsions in stirred tank. Process Safety and Environmental Protection. Lien externe
Salam, M., Grossule, V., Elouali, S., Wang, F., Benali, S., Raquez, J.-M., Yakti, W., Bolletta, V., Henjak, M., Hayat, F., & Wang, Q. (2025). Sustainable biowaste management: Uncovering the environmental footprint of traditional and emerging waste managing technologies. Environmental Chemistry and Ecotoxicology, 7, 1684-1700. Lien externe
Salimi, S., Latreille, P.-L., Zhang, H., Boffito, D. C., Arlt, J., Martinez, V. A., & Banquy, X. (2025). Rapid Quantification of Virus-Like Particles via Gold Nanoparticle Sensors and Dark-Field Differential Dynamic Microscopy. ACS Sensors, 10 pages. Lien externe
Samuel Rocha, F., Tavares Avila, P. R., Khelfaoui, F., Vernhes, L., Patience, G. S., Sapieha, J.-E., & Martinu, L. (2025). Reactively sputtered coatings for the protection of a nickel-based alloy against heavy oil corrosion fouling. Journal of Vacuum Science & Technology A Vacuum Surfaces and Films, 43(3), 033106 (14 pages). Lien externe
Samuel Rocha, F., Tavares Avila, P. R., Khelfaoui, F., Vernhes, L., Patience, G. S., Smith, K. J., Sapieha, J.-E., & Martinu, L. (2025). Heavy Oil Corrosion Fouling of Ni-Based Alloy and Co-Based Thermal Sprayed Coatings. Journal of Thermal Spray Technology. Lien externe
Sanchez Rendon, A. F. (2025). Using Soil and Other Accessible Resources for the Remineralization of Water from Sorbent-Based Atmospheric Harvesting Systems [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Sanchez Rendon, A. F., Ponton, S., Brassard, D., Bédard, É., & Tavares, J. R. (2025). Water mineralization in resource-limited locations. Journal of Water Process Engineering, 78, 108741 (9 pages). Lien externe
Sarkar, B., Miquet-Westphal, F., Fan, J., Petrossian, G., & Cicoira, F. (2025). Electromagnetic interference shielding in soft, lightweight, and flexible conducting polymer-based sponges. Flexible and Printed Electronics, 10(2), 025002 (10 pages). Disponible
Savadogo, O. (juillet 2025). Status on the development of Fuel Cells Technologies [Résumé]. H₂ Excellence Workshop 2025, Montréal, Québec. Lien externe
Schieppati, D. (2025). Ultrasound-Assisted Depolymerization and Chemical Modification of Waste Lignin for Value-Added Products Manufacturing [Thèse de doctorat, Polytechnique Montréal]. Disponible
Schieppati, D., Fattahi, S. K., Blais, B., Boffito, D. C., & Denner, F. (2025). Acoustic wave propagation in liquid medium and damping mechanisms: modeling and simulation. Dans Kerboua, K. (édit.), Modeling and Simulation of Sono-Processes (p. 35-57). Lien externe
Seitfudem, G. A., Berger, M., & Boulay, A.-M. (septembre 2025). Combined uncertainty of static AWARE2.0 and climate models: Are climate change signals noticeable in prospective water scarcity footprints? [Résumé]. 12th International Conference on Life Cycle Management (LCM 2025), Palermo, Italy. Lien externe
Seitfudem, G. A., Berger, M., Müller Schmied, H., & Boulay, A.-M. (2025). Data to 'The updated and improved method for water scarcity impact assessment in LCA, AWARE2.0' [Ensemble de données]. Lien externe
Seitfudem, G. A., Berger, M., Schmied, H. M., & Boulay, A.-M. (2025). The updated and improved method for water scarcity impact assessment in LCA, AWARE2.0. Journal of Industrial Ecology, 29(3), 891-907. Disponible
Self, J., Al-Salih, H., & Abu-Lebdeh, Y. (2025). From Electrolyte Freezing to Ion Transfer Energies in Multi-Solvent Electrolytes. Meeting abstracts/Meeting abstracts (Electrochemical Society. CD-ROM), MA2025-01(8), 820 (1 page). Lien externe
Self, J., Al-Salih, H., & Abu-Lebdeh, Y. (2025). Relating the Salt Thermodynamic Factor to Solvent Activities in Ternary Multi-Solvent Electrolytes. Journal of The Electrochemical Society, 172(1), 010519 (8 pages). Lien externe
Serafin, B., Kamen, A., De Crescenzo, G., & Henry, O. (2025). Impact of Lectin Biotinylation for surface plasmon resonance and enzyme-linked Lectin assays for protein glycosylation. Analytical Biochemistry, 696, 115693 (9 pages). Disponible
Seychal, G., Bron, P., Talon, O., Aramburu, N., & Raquez, J.-M. (2025). Can Polyhydroxyurethane-Derived Covalent Adaptable Networks Provide Environmental Benefits in Composite Applications? ACS Sustainable Chemistry & Engineering, 13(29), 11238-11253. Lien externe
Shadbahr, J., Peeples, C. A., Pahija, E., Panaritis, C., Boffito, D. C., Patience, G. S., & Bensebaa, F. (2025). Sustainability assessment of catalyst design on CO2-derived fuel production. Renewable and Sustainable Energy Reviews, 208, 115011. Lien externe
Sharafi Zamir, S., & Fathi, B. (2025). Organo-titanates and zirconates coupling agents in polymer composites: A review [Commentaire ou lettre]. Journal of Elastomers & Plastics. Lien externe
Shenouda, P. (juillet 2025). Hydrogen Startups – Pitfalls and Key Strategies for Innovators [Résumé]. H₂ Excellence Workshop 2025, Montréal, Québec. Lien externe
Siblani, M. M., Ollivier, M., Chartrand, P., & Favergeon, L. (2025). Modeling the Oxidation Kinetics of Ti-6Al-4 V Spherical Powder at High Temperatures. High Temperature Corrosion of Materials, 102(4), 32 pages. Lien externe
Simon, W., Klassen, D., Mottoul, M., Ponton, S., Brassard, D., Raquez, J.-M., Karthikeyan, A., Dumont, M.-J., & Tavares, J. R. (2025). Long‐lasting hydrophilicity induced by ultraviolet light on surface modified hydrophobic polylactic acid. Journal of Applied Polymer Science, 142(24), e57009 (13 pages). Disponible
Singh, R. (2025). Artificial Intelligence and Computational Tools to Study and Optimize Stem Cell Differentiation into Pancreatic Endoderm Lineages [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Singh, R., Orimi, H. E., Pedabaliyarasimhuni, P. K. R., Hoesli, C. A., & Chioua, M. (2025). AI‐Driven Quality Monitoring and Control in Stem Cell Cultures: A Comprehensive Review. Biotechnology Journal, 20(8). Lien externe
Surmont, A., Rowenczyk, L., Santos, I. V., Hatam, F., Boulay, A.-M., & Prévost, M. (2025). Assessing the sustainability and safety of Polyethylene Terephthalate (PET) liners for Lead Service Lines (LSL) Upgrades. Water Research, 268(B), 122686 (12 pages). Disponible
Taguet, A., Le Moigne, N., Bugaut, M., Heuzey, M.-C., & Carreau, P. (janvier 2025). Comparison between different processing routes to disperse cellulose nanocrystals into polyvinyl alcohol [Présentation]. Dans Eurofillers Polymer Blends 2025, Lyon, France. Non disponible
Talebpour, P., Mighri, F., Ajji, A., Heuzey, M.-C., & Virgilio, N. (2025). Tailoring the Morphology and Orientation in Immiscible Binary Polymer Blends during Melt-Electrospinning. ACS Applied Polymer Materials, 13 pages. Lien externe
Tanguy, P. A. (juillet 2025). Low Carbon Hydrogen Economy : Catching Up with Market Readiness [Résumé]. H₂ Excellence Workshop 2025, Montréal, Québec. Lien externe
Thakur, A., Morya, S., Kumar, D., Ahmed, J., Regenstein, J. M., & Fuoco, D. (2025). Potential of Quinoa as a Source of Secondary Metabolites for Human Health. Dans Upadhyay, S. K., & Singh, D. B. (édit.), Plant Secondary Metabolites : Sources and Applications (p. 274-293). Lien externe
Thiam, B. (2025). Développement d'un condensateur électrochimique en milieu acide ou neutre à base d'oxyde de manganèse modifié par l'acide silicotungstique sur un support de graphite [Thèse de doctorat, Polytechnique Montréal]. Disponible
Tremblay, S., & Blais, B. (mars 2025). Optimization of RFI Performances in Large Furnaces Through Mathematical Simulations [Communication écrite]. Annual Meeting & Exhibition of The Minerals, Metals & Materials Society (Light Metals 2025), Las Vegas, NV, USA. Publié dans The minerals, metals & materials series. Lien externe
Tucny, J.-M., Leclaire, S., Vidal, D., & Bertrand, F. (2025). On the Invalidity of the Extended Navier-Stokes Equations to Compute Rarefied Gas Flows in a Cylinder Array. International journal of computational fluid dynamics, 1-18. Lien externe
Uzundurukan, A., Nelson, M., Teske, C., Islam, M. S., Elzagheid, M. I., Christy, J. V., Martin, H.-J., Muratov, E., Glover, S., & Fuoco, D. (2025). Meta-analysis and review of in silico methods in drug discovery – part 1: technological evolution and trends from big data to chemical space. The Pharmacogenomics Journal, 25(3). Lien externe
Uzundurukan, A., Poncet, S., Boffito, D. C., & Micheau, P. (2025). Effect of the transpulmonary pressure on the lungs' vibroacoustic response: a first numerical perspective. Frontiers in Digital Health, 7, 13 pages. Disponible
Vahabzadeh Pasikhani, J., Taha, Y., & Chaouki, J. (2025). Selective recycling of critical metals from the dolomitic limestone waste through multi-step alkaline precipitation integrated with CO₂ carbonation. Journal of Environmental Management, 391, 126509 (14 pages). Lien externe
Vaillant, M. (2025). Développement d'un modèle de substitution pour un système de refroidissement actif [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Vatankhah, F. (2025). Electrified Microwave-Driven Hydrogen and Carbon Nanomaterial Production from Catalytic Pyrolysis of Commodity Polymers [Thèse de doctorat, Polytechnique Montréal]. Disponible
Vatankhah, F., Carrillo Garcia, A., & Chaouki, J. (2025). Hydrogen and carbon nanotube production from microwave-assisted catalytic decomposition of plastic waste. Chemical Engineering Journal, 503, 15 pages. Lien externe
Vatankhah, F., Kara, A., Carrillo Garcia, A., & Chaouki, J. (2025). Kinetic modeling of polyethylene pyrolysis under microwave irradiation toward predictive product distribution. Chemical Engineering Journal, 525, 170441 (12 pages). Lien externe
Vieira, D., Cruzado, G. M., Harvey, E. J., & Merle, G. (2025). Advanced sensing strategies for detecting zinc levels and zinc-related biomarkers in cancer pathogenesis. Sensing and Bio-Sensing Research, 47, 100754 (18 pages). Disponible
Wang, K., & Chartrand, P. (2025). Extension of the modified quasichemical model in the distinguishable-pair approximation to multicomponent solutions via an on-the-fly interpolation framework. Calphad, 90, 102852 (10 pages). Lien externe
Wang, K., & Chartrand, P. (2025). A Two-Sublattice-Modified Quasichemical Model in the Distinguishable-Quadruplet Approximation for Multiconfiguration Short-Range Ordering in Metallurgical Melts. Metallurgical and Materials Transactions B. Lien externe
Wang, M., Cicoira, F., & Mauzeroll, J. (2025). Unraveling the Influence of Additives/Post Treatments on the Transient Response and Ionic Kinetics in PEDOT:PSS Based OECTs. Meeting abstracts/Meeting abstracts (Electrochemical Society. CD-ROM), MA2025-01(34), 3181 (1 page). Lien externe
Wang, M., Fan, J., Bilodeau-Calame, M., Kim, C., Chiang, C.-L., Chaverri Segura, A. F., Vurro, V., Bargigia, I., Mauzeroll, J., & Cicoira, F. (2025). Robust and flexible organic electrochemical transistors enabled by electropolymerized PEDOT. npj Flexible Electronics, 9(1), 74 (11 pages). Lien externe
Watson, S., Abdelmalek, F., Larouche, É., Généreux, M., Monette, J., Côté, C., Bédard, É., Tavares, J. R., Wertheimer, M. R., & Reuter, S. (2025). Electrifying greenhouse agriculture: Cold atmospheric pressure plasma technology for Pythium ultimum control. Environmental Technology & Innovation, 39, 104222 (13 pages). Disponible
Watt, A., Job, D., Matta, J., Chandra Teja Dadi, N., Dang, C.-T., Raphael, Y., Vorstenbosch, J., Merle, G., & Barralet, J. E. (2025). Comparative Antimicrobial Properties of Sodium Borate and Carbonate and their Perborate and Percarbonate Counterparts. Advanced NanoBiomed Research, 2500045 (11 pages). Lien externe
Yang, H., Thu Phan, A., Gheribi, A. E., & Chartrand, P. (2025). Extending the kinetic theory-based thermal conductivity model to reciprocal molten salt mixtures with short-range ordering via the Modified Quasi-chemical Model in the Quadruplet Approximation. Solar Energy Materials and Solar Cells, 292, 113724. Lien externe
Zemane, W.-W. A. (2025). Développement d'une cathode à base de lithium-fer-phosphate (LiFePO4) supportée par du carbone biosourcé pour la batterie au lithium [Thèse de doctorat, Polytechnique Montréal]. Disponible
Zemane, W.-W. A., & Savadogo, O. (2025). Electrochemical Performances of Li-Ion Batteries Based on LiFePO4 Cathodes Supported by Bio-Sourced Activated Carbon from Millet Cob (MC) and Water Hyacinth (WH). Batteries, 11(10), 361-361. Lien externe
Zhang, Y., Liu, X., Patouillard, L., Margni, M., Bulle, C., & Yuan, Z. (2025). Where coal is produced really matters the environmental impacts. Resources, Conservation and Recycling, 212, 107987. Lien externe
Zhuang, Y. (2025). Extrusion Catalytic Depolymerization of PMMA [Thèse de doctorat, Polytechnique Montréal]. Disponible
Zhuang, Y. (juillet 2025). Multi-scale modelling and experimental validation of synergistic CO₂ and H₂O co-electrolysis for syngas production [Résumé]. H₂ Excellence Workshop 2025, Montréal, Québec. Lien externe
Zhuang, Y., Nguyen, T. D., Sharifian, M., Dubois, J.-L., Ajji, A., & Patience, G. S. (2025). Reactive extrusion recycling of polymethyl methacrylate to methyl methacrylate and methacrylic acid. Chemical Engineering Journal, 515, 162709 (12 pages). Disponible
Zriki, M., Carrillo Garcia, A., Fradette, L., & Chaouki, J. (2025). Separation of rare earth elements via pickering emulsion: A sustainable approach to physicochemical beneficiation. Minerals Engineering, 233, 109631 (10 pages). Lien externe
