 | Monter d'un niveau |
Abanobi, A. E., Esmati, K., Khan, W. N., Tangestani, R., Pendurti, S., Natarajan, A., & Martin, É. (2025). New numerical model for anisotropic sintering of additively manufactured Binder Jet 316L parts. Journal of Manufacturing Processes, 156(Part A), 948-963. Lien externe
Abda, M., Hamedi, M., Piollet, E., Blake, C., & Gosselin, F. (2025). The Finite Element Neural Network Method: One Dimensional Study. Next research., 100885. Lien externe
Arnould, B., & Laurendeau, É. (2025). Deep iterative convergence of Reynolds-Averaged Navier–Stokes methods for high-lift aircraft geometries. Journal of Aircraft, 1-20. Disponible
Arslan, D., Mihai, M., Therriault, D., & Lévesque, M. (2025). Flexural properties of sandwich panels fabricated by filament-extrusion of high-temperature thermoplastic composites. Composites Science and Technology, 263, 111106 (12 pages). Lien externe
Arslan, D., Mihai, M., Therriault, D., & Lévesque, M. (2025). Formulation and characterization of polyetherimide composites reinforced with recycled carbon fibers and thermal black particles for Fused filament fabrication. Composites Part A Applied Science and Manufacturing, 194, 108946 (12 pages). Lien externe
Bagheri, M. A., Aubin, C.-É., Nault, M.-L., & Villemure, I. (2025). Mechanical characterization of an origami-inspired super deformable metamaterial with high tunability for tissue engineering. Materials & Design, 251, 113701 (13 pages). Disponible
Bagheri, M. A., Aubin, C.-É., Nault, M.-L., & Villemure, I. (2025). Multi-objective optimization of an origami inspired super-expandable scaffold for distraction osteogenesis. Materials & Design, 258, 114620 (16 pages). Lien externe
Barabi, A., Deschenes, P., Lacasse, R., Thibault, D., Trudeau, M. L., & Brochu, M. (2025). pH estimation at corrosion fatigue crack tip in 13Cr-4Ni martensitic stainless steel. Procedia Structural Integrity, 68, 285-291. Lien externe
Beaini, R., Dupont, F., Dumont, A., Robert, É., Sapieha, J.-E., & Martinu, L. (2025). Surface temperature and emissivity assessment in an enclosed cavity at high temperature using IR thermography. Infrared Physics & Technology, 105815. Lien externe
Bellamy, A., Ashok, V., Robert, É., Silverwood, A., Claveau-Mallet, D., & Bédard, É. (2025). Impact of side stream crossflow filtration on water quality in a HVAC circuit. Journal of Building Engineering, 113796. Lien externe
Benchimol, A. A., Parmentier, T., & Vidal, D. (2025). Impact of carotid artery sectioning on cerebral blood flow in bovines: a numerical hemodynamic study. American Journal of Veterinary Research, 8 pages. Lien externe
Bennoune, R., Chen, G., Tagne, S.-C. T., Vissière, A., Damak, M., Mehdi-Souzani, C., Anwer, N., Mayer, J. R. R., & Nouira, H. (2025). Advanced ultra-high precision system (NanoCyl) for accurate cylindricity measurements. CIRP Journal of Manufacturing Science and Technology, 59, 118-126. Disponible
Berthet, L., Blais, P., Nennemann, B., Monette, C., & Gosselin, F. (2025). Mode split prediction for rotating disks with flexible stator coupling. Journal of Fluids and Structures, 132, 18 pages. Lien externe
Bienvenue, C., Naceur, A., Carrier, J.-F., & Hébert, A. (2025). A flexible, moment-preserving, and monotone discretization of the multidimensional angular Fokker–Planck operator. Nuclear Science and Engineering, 18 pages. Disponible
Bienvenue, C., Naceur, A., Hébert, A., & Carrier, J.-F. (2025). Toward highly accurate multigroup coupled photon-electron-positron cross-sections for the Boltzmann Fokker-Planck Equation. Journal of Computational Physics, 524, 113740 (29 pages). Disponible
Chabot, O., & Savard, B. (2025). Quenching and pollutant emissions in side-wall and head-on NH₃/H₂/N₂ premixed laminar flame. Combustion and Flame, 282, 114463 (17 pages). Lien externe
Chakraborty, A., Lalh, M., Martin, É., Karimialavijeh, H., Bejarano, A., Wessman, A., Zou, Y., & Habibnejad-Korayem, M. (2025). Influence of carbon on the rheology and additive manufacturability of Ti-6Al-4 V powders. Materials & Design, 113833. Lien externe
Chang, T., Pommée, T., Ross, A., & Verduyckt, I. (2025). The influence of the visual design of spaces on female speakers' vocal effort: an exploratory study. Journal of Voice. Lien externe
Charbonneau, E., Romeas, T., Ross, A., & Begon, M. (2025). Including visual criteria into predictive simulation of acrobatics to enhance the realism of optimal techniques. Sports Biomechanics, 23 pages. Lien externe
Chayer, M., Phan, P., Arnoux, P.-J., Wang, Z., Rawlinson, J., Aruwajoye, O., & Aubin, C.-É. (2025). Understanding the influence of cage and instrumentation strategies with oblique lumbar interbody fusion for grade I spondylolisthesis – A comprehensive biomechanical modeling study. The Spine Journal. Lien externe
Cimmino, M., & Sabbagh, G. (2025). Neural controlled differential equations for residential heating load prediction. Journal of Physics Conference Series, 3140(5), 052024 (7 pages). Lien externe
Cobetto, N., Fecteau, M.-È., Caouette, C., Gay, M., Larson, A. N., Hoernschemeyer, D., Boeyer, M., El-Hawary, R., Alanay, A., & Aubin, C.-É. (2025). Multicenter validation of a surgical planning tool for lumbar vertebral body tethering simulating growth modulation over 2 years. Spine Deformity, 10 pages. Lien externe
Constant, C., Larson, A. N., Polly, D. W., & Aubin, C.-É. (2025). Neural network-based multi-task learning to assist planning of posterior spinal fusion surgery for adolescent idiopathic scoliosis. Spine Deformity, 13 pages. Lien externe
Constantineau, C., Deschênes, P.-A., Dubois, R., & Brochu, M. (2025). Fatigue strength prediction of 410NiMo stainless steel with surrogate weld discontinuities. International Journal of Fatigue, 197, 108955 (14 pages). Disponible
Coulombel, P., & Denner, F. (2025). Cavitation onset in transient pressure fields. International Journal of Multiphase Flow, 194, 105489 (9 pages). Lien externe
Cui, S., Cloutier, G., Roy Cardinal, M.-H., Savoji, H., & Maghoul, P. (2025). Simultaneous viscoelastic characterization of soft tissues based on shear wave ultrasound dispersion and multi-scale wavelet cross-correlation analysis. Mechanical Systems and Signal Processing, 237, 112890 (19 pages). Lien externe
da Silveira, S. R., Collet, L., Haque, S., Lapierre, L., Bagniewska-Zadworna, A., Smith, R. S., Gosselin, F., Routier-Kierzkowska, A.-L., & Kierzkowski, D. (2025). Mechanical interactions between tissue layers underlie plant morphogenesis. Nature Plants. Lien externe
Dega Kougoum, C. O., Jadidinia, A., & Boukhili, R. (2025). A study on the effect of an oxidizing atmosphere during the recycling of CFRP by pyrolysis. Fibers, 13(5), 58-58. Disponible
Dollon, Q., Ghorbani, E., & Gosselin, F. (2025). Bayesian input-state-parameter inference of hydrodynamic bearings: From partial displacement measurements to force reconstruction. Mechanical Systems and Signal Processing, 230, 112610 (16 pages). Lien externe
Dupoirieux, G., Demir, E., & Tuysuz, O. (2025). A Crystal Plasticity-Based Model for Orthogonal Machining Mechanics of Single-Crystal Materials. Journal of Manufacturing Science and Engineering, 1-42. Lien externe
Durocher, A., Fan, L., Füri, M., Sirois, J., May, D. A., Bourque, G., Bergthorson, J. M., Yun, S., & Vena, P. (2025). OH-PLIF measurements for micromixed flames in a multi-injector burner at elevated pressures and temperatures. Journal of Engineering for Gas Turbines and Power, GTP-25-146 (15 pages). Lien externe
El-Jakl, M., & Laberge Lebel, L. (2025). Braid-trusion of hollow thermoplastic composites using an expanding mandrel approach. Composites Part B Engineering, 305, 112677 (10 pages). Disponible
El-Jakl, M., & Laberge Lebel, L. (2025). Fibre waviness reduction in thermoplastic pultrusion by using DREF yarns. Composites Part B: Engineering, 288, 111908. Disponible
Elsemin, O., Beauséjour, M., Lorange, J.-P., Sassine, S., Théroux, J., Barchi, S., Joncas, J., Le May, S., Fortin, C., Aubin, C.-É., Parent, S., Cobetto, N., Ishimo, M.-C., & Labelle, H. (2025). Correction: My orthopedic brace inventory (MOBI): a new, reliable, and valid questionnaire to identify barriers to brace adherence in adolescent idiopathic scoliosis treatment. Spine Deformity. Lien externe
Elsemin, O., Beauséjour, M., Lorange, J.-P., Sassine, S., Théroux, J., Barchi, S., Joncas, J., Le May, S., Fortin, C., Aubin, C.-É., Parent, S., Cobetto, N., Ishimo, M.-C., & Labelle, H. (2025). My orthopedic brace inventory (MOBI): a new, reliable, and valid questionnaire to identify barriers to brace adherence in adolescent idiopathic scoliosis treatment. Spine deformity, 13, 1075-1084. Disponible
Elsherbiny, A. M. M., & Leclaire, S. (2025). Integration of Lattice Boltzmann-overset method with non-conforming quadtree mesh based on the combination of spatial and Lagrangian-link interpolated streaming technique. Computers & Fluids, 289, 106522 (16 pages). Disponible
Esmati, K., Abanobi, A. E., Khan, W. N., Tangestani, R., Pendurti, S., Natarajan, A., & Martin, É. (2025). Temperature and printing axis effects on anisotropic sintering in binder jetting additive manufactured 17-4 PH stainless steel: Experimental and numerical study. Journal of Materials Research and Technology. Lien externe
Fan, L., Durocher, A., Bergthorson, J. M., Fond, B., Savard, B., & Vena, P. (2025). Investigation on the structure of high Ka flames using simultaneous thermographic PIV and OH-PLIF. Combustion and Flame, 275, 114072 (16 pages). Lien externe
Farhadi, D., Pernigoni, L., Mélançon, D., & Bertoldi, K. (2025). Origami Crawlers: Exploring A Single Origami Vertex for Complex Path Navigation. Advanced Materials, 8 pages. Lien externe
Frija-Gruman, N. M., Villanueva, S., Ma, Y., Asselah, J., Lambert, S., Achiche, S., Osmanlliu, E., Pomey, M.-P., Hijal, T., Lessard, D., Engler, K., Lin, J., & Lebouché, B. (2025). Development of an AI-based emotional tone classifier to support psychosocial triage in digital cancer nursing tools. Annals of Oncology, 36(S2), S1625-S1625. Lien externe
Gagnon, É., Leroux, G., Lévêque, N., & Birglen, L. (2025). Robotic ground vehicle for acoustic data acquisition on construction sites. Automation in Construction, 179, 106434. Lien externe
Gay, M., Cobetto, N., Caouette, C., Larson, A. N., Villemure, I., Hoernschemeyer, D. G., Boeyer, M. E., El-Hawary, R., Alanay, A., & Aubin, C.-É. (2025). Patient-specific biomechanical modeling of intraoperative scoliosis correction on the 2-year outcomes for thoracolumbar/lumbar vertebral body tethering. Spine Deformity, 8 pages. Lien externe
Gennari, G., Gorges, C., Denner, F., & Wachem, B. (2025). A marching cubes based method for topology changes in three-dimensional two-phase flows with front tracking. Journal of Computational Physics, 114284. Lien externe
Ghezelbash, F., Eskandari, A. H., Jafari Bidhendi, A., Shirazi-Adl, A., & Larivière, C. (2025). Development and validation of a subject-specific integrated finite element musculoskeletal model of human trunk with ergonomic and clinical applications. Biomechanics and Modeling in Mechanobiology, 13 pages. Lien externe
Gholamrezaie, S., Cimmino, M., & Eslami Nejad, P. (2025). Modeling and experimental validation of a single-pipe CO₂ thermal network connected to local heat pumps. Applied Thermal Engineering, 128363. Lien externe
Ghorbani, H., & Khameneifar, F. (2025). Denoising and Simplification of 3D Scan Data of Damaged Aero-Engine Blades for Accurate and Efficient Rigid and Non-Rigid Registration. Sensors, 25(19), 6148 (25 pages). Lien externe
Gonzalez-Villagomez, J., Esau, G.-V., Mayer, J. R. R., Rodríguez-Donate, C., & Xing, K. (2025). Novel cylindrical representation of the STFT for signal analysis. Electronics Letters, 61(1), e70130 (4 pages). Disponible
Gorges, C., Chéron, V., Chopra, A., Denner, F., & van Wachem, B. (2025). Correlations for aerodynamic force coefficients of non-spherical particles in compressible flows. International Journal of Multiphase Flow, 184, 105111 (20 pages). Disponible
Gorges, C., Evrard, F., Chiodi, R., van Wachem, B., & Denner, F. (2025). Sharp front tracking with geometric interface reconstruction. Journal of Computational Physics, 535, 114059 (21 pages). Lien externe
Hammes, F., Gabrielli, M., Cavallaro, A., Eichelberg, A., Barigelli, S., Bigler, M., Faucher, S. P., Füchslin, H. P., Gaia, V., Gómez-Valero, L., Grimard-Conea, M., Haas, C. N., Hamilton, K. A., Greenwald, H., Héchard, Y., Julian, T., Kieper, L., Lauper, U., Lefebvre, X., ... Waak, M. B. (2025). Foresight 2035: A perspective on the next decade of research on the management of Legionella spp. in engineered aquatic environments. FEMS Microbiology Reviews, 49, fuaf022 (18 pages). Disponible
Horriche, Z., Étienne, S., Béguin, C., Couty, N., & Brosset, L. (2025). Numerical Study of the Influence of Weber and Reynolds Numbers on Global Wave Shapes Before Impact. International Journal of Offshore and Polar Engineering, 35(2), 212-224. Lien externe
Jadayel, M., & Khameneifar, F. (2025). Increasing 3D printing accuracy through convolutional neural network-based compensation for geometric deviations. Machines, 13(5), 382 (22 pages). Disponible
Jain, A., Denner, F., & van Wachem, B. (2025). Self-sorting of bidisperse particles in evaporating sessile droplets. International Journal of Multiphase Flow, 105382 (20 pages). Lien externe
Jaiswal, N., Ma, Y., Lebouché, B., Poenaru, D., & Osmanlliu, E. (2025). PedMedQA: Comparing Large Language Model Accuracy in Pediatric and Adult Medicine. Pediatrics Open Science, 1(2), 3 pages. Lien externe
Janodet, R., Wachem, B. , & Denner, F. (2025). A fully-coupled algorithm with implicit surface tension treatment for interfacial flows with large density ratios. Journal of Computational Physics, 520, 113520 (22 pages). Disponible
Jobin, O., Chartray-Pronovost, M., Kaprolat, W., & Robert, É. (2025). Hypergolic ignition of hybrid rocket fuels in a slab burner experiment. Combustion and Flame, 274, 113948 (14 pages). Disponible
Karamzadeh, V., Sarvestani, H. Y., Sohrabi-Kashani, A., Kulkarni, A., Jafari, A., Lacelle, T., Savoji, H., Jakubinek, M. B., & Ashrafi, B. (2025). Engineering ceramics for biomedical applications through nanofiller integration and 3D printing. Advanced Composites and Hybrid Materials, 8(2), 223 (17 pages). Lien externe
Khanzode, D., Thomieres, A., Jha, R., Duchalais, E., Baron, L., Pisla, D., & Chablat, D. (2025). Mechanism and machine theory Optimization of Design Parameters for a Flexible Endoscopic Surgical Tool Using Medical Imaging Data for Minimally Invasive Surgery (MIS). Mechanism and Machine Theory, 209, 105987 (21 pages). Lien externe
Khanzode, D., Thomieres, A., Jha, R., Duchalais, É., Baron, L., Pîslă, D., & Chablat, D. (2025). Optimization of design parameters for a flexible endoscopic surgical tool using medical imaging data for minimally invasive surgery (MIS). Mechanism and Machine Theory, 209, 105987 (18 pages). Lien externe
Khatami, N., Caraus, I., Rahaman, M., Nepotchatykh, E., Elbakry, M., Elremaly, W., Franco, A., Beauséjour, M., Laberge, A.-M., Parent, S., Labelle, H., Aubin, C.-É., Lachaine, J., & Moreau, A. (2025). Genome-wide profiling of circulating microRNAs in adolescent idiopathic scoliosis and their relation to spinal deformity severity, and disease pathophysiology. Scientific Reports, 15, 5305 (11 pages). Disponible
Khazaee, S., Bitar-Nehme, E., Boukhili, R., Kostenov, J., Regnaud, W., & Martin, É. (2025). A Low-Viscosity, Recyclable Polymer-Based Binder Strategy for Metal FDM: Toward High Powder Loading, Sustainable Processing, and Comprehensive Characterization of 17-4PH Stainless Steel Parts. Polymers, 17(19), 2575. Lien externe
Lamoureux, D., Fillion, J., Ramananarivo, S., Gosselin, F., & Mélançon, D. (2025). Kirigami-inspired parachutes with programmable reconfiguration. Nature, 646(8083), 88-94. Lien externe
Lamoureux, D., Ramananarivo, S., Mélançon, D., & Gosselin, F. (2025). Simulating flow-induced reconfiguration by coupling corotational plate finite elements with a simplified pressure drag. Extreme Mechanics Letters, 74, 102271 (8 pages). Disponible
Lassus, A., Therriault, D., Favis, B. D., & Virgilio, N. (2025). Tailoring the morphology in partially and fully miscible mixtures of PEEK and PEI. Polymer, 326, 128315 (15 pages). Disponible
Lecompte, O., Achiche, S., Gesta, A., & Mohebbi, A. (2025). Somatotopic non-invasive proprioceptive feedback strategy for prosthetic hands: a preliminary study. Biomedical Physics & Engineering Express. Lien externe
Lefebvre, X., Ashok, V., Claveau-Mallet, D., Robert, É., & Bédard, É. (2025). Data-driven cooling tower optimization: A comprehensive analysis of energy savings using microsand filtration. Applied Thermal Engineering, 258(Part C), 124736 (13 pages). Lien externe
Lefebvre, X., Chartray-Pronovost, M., Duchaine, C., Bédard, É., Prévost, M., & Robert, É. (2025). Evaporation of aerosol droplets from contaminated cooling tower water. Physics of Fluids, 37(2), 023365 (16 pages). Lien externe
Li, Z., Hawkes, E. R., Wehrfritz, A., & Savard, B. (2025). Direct numerical simulation of nonpremixed ignition under gasoline compression-ignition engine conditions. Combustion and Flame, 281, 114393 (19 pages). Lien externe
Li, Z., Versailles, P., Vabre, M., Hawkes, E. R., & Savard, B. (2025). NOₓ production in a canonical Micromix hydrogen flame. Proceedings of the Combustion Institute, 41, 105793. Lien externe
Liétard, Y., Therriault, D., & Mélançon, D. (2025). Exploiting geometric frustration in coupled von mises trusses to program multifunctional mechanical metamaterials. Advanced Engineering Materials, 27(11), 2402006 (9 pages). Disponible
Liguori, V., Laurendeau, É., Moëns, F., & Peter, J. (2025). Appropriate Lift Slope Model for Nonlinear Vortex Lattice Method. Journal of Aircraft, 9 pages. Lien externe
Macquet, Y. P., Béguin, C., & Étienne, S. (2025). Predictive model for bubble size distribution in a vertical pipe. International Journal of Multiphase Flow, 105438. Lien externe
Mallinos, A., Pillot, C., Wang, X., Ritzman, T. F., Floccari, L. V., Aubin, C.-É., & Schwend, R. M. (2025). Biomechanical analysis of pedicle screw density and rod contouring in adolescent idiopathic scoliosis instrumentation. Clinical Biomechanics, 131, 106694 (11 pages). Lien externe
Mallinos, A., Pillot, C., Wang, X., Ritzman, T. F., Floccari, L. V., Schwend, R. M., & Aubin, C.-É. (2025). Increased differential rod contouring reduces the effectiveness of surgical correction in patients with adolescent idiopathic scoliosis. Spine Deformity, 14 pages. Lien externe
Marousi, M., Bejjani, R., & Balazinski, M. (2025). Initial Wear of Cutting Coated Tools While Machining TiMMC. Wear, 578–579, 206222 (14 pages). Lien externe
Marvi, P. K., Das, P., Jafari, A., Hassan, S., Savoji, H., Srinivasan, S., & Rajabzadeh, A. R. (2025). Multifunctional carbon dots in situ confined hydrogel for optical communication, drug delivery, ph sensing, nanozymatic activity, and UV shielding applications. Advanced Healthcare Materials, 14(6), 2403876 (16 pages). Lien externe
Massin, J., & Birglen, L. (2025). On the Jacobian matrix of 3 - RPS and triangular 6 - UPS linkages. Mechanism and Machine Theory, 215, 106181 (20 pages). Lien externe
Maxim. Frija-Gruman, N., Bélanger Villanueva, S., Ma, Y., Osmanlliu, E., Lambert, S., Pomey, M.-P., Hallal, T., Lessard, D., Engler, K., Lin, J.-R., Asselah, J., & Lebouché, B. (2025). Abstract B013: Emotional tone classification as a tool for psychosocial risk detection in oncology: An AI-powered chatbot. Clinical Cancer Research, 31(13_Supplem), B013-B013. Lien externe
Maya Murcia, L. F., Fan, L., Durocher, A., Savard, B., & Vena, P. (2025). An evaluation of event-based cameras for particle image velocimetry. Experiments in Fluids, 66(11), 22 pages. Lien externe
Mbaye, A., & Cimmino, M. (2025). A Comprehensive Variable Refrigerant Flow Heat Recovery Model for Building Performance Simulation. International Journal of Refrigeration. Lien externe
McNeill, J., VanDyk, R., Simha, C. H. M., Dadouche, A., Bäckman, D., Ensan, M. N., & Gholipour, J. (2025). Modeling impact of drones on flat plates. Aerospace Science and Technology, 161, 110103 (15 pages). Disponible
Meulemans, M., Durocher, A., Versailles, P., Bourque, G., & Bergthorson, J. M. (2025). Calibration techniques for quantitative NO measurement using Laser-Induced Fluorescence. Journal of Quantitative Spectroscopy and Radiative Transfer, 330, 109221. Lien externe
Moazen, S., Gosselin, F., Tabiai, I., & Dubé, M. (2025). 3D printing LDPE/lunar regolith simulant composite: manufacturing with in-situ resources on the Moon. Acta Astronautica. Lien externe
Moghaddam, A. S., Bahrami, M., Sarikhani, E., Tutar, R., Ertas, Y. N., Tamimi, F., Hedayatnia, A., Jugie, C., Savoji, H., Qureshi, A. T., Rizwan, M., Maduka, C. V., & Ashammakhi, N. (2025). Engineering the immune response to biomaterials. Advanced Science, 12(19), 2414724. Lien externe
Ndiaye, E. H. A. A., Trépanier, J.-Y., Sousa, R. H., & Leclaire, S. (2025). Conservative immersed boundary methods on cartesian grids for inviscid compressible flows simulation. International Journal of Heat and Fluid Flow, 114, 109775 (15 pages). Disponible
Ngunzi, V., Njoka, F., Mureithi, N. W., Kinyua, R., & Pearce, J. M. (2025). Advanced Modeling and Performance Analysis of a Photovoltaic-Thermal Double Compression Heat Pump for Industrial Thermal Applications. Renewable Energy, 256(F), 124347 (16 pages). Lien externe
Nguyen, D., Beauséjour, M.-H., Solorzano Barrera, C., Qiao, N., Villemure, I., & Aubin, C.-É. (2025). Finite element modeling of pedicle screw fixation considering patient-specific bone density. Computer Methods in Biomechanics & Biomedical Engineering, 11 pages. Lien externe
Nikoutadbir, A., Torabi, S., & Bolouki, S. (2025). Secure event-triggered control for vehicle platooning against dual deception attacks. Journal of Network and Computer Applications, 243, 104323. Lien externe
Ouadday, R., Vadean, A., Okda, Y. E., Boukhili, R., & Abusrea, M. (2025). Experimental investigation of moisture absorption and mechanical properties of GFRP laminates for stay vane extensions. Journal of Composite Materials. Lien externe
Paques, M., Khan, W. N., Chakraborty, A., Changeux, B., Turenne, S., Masse, J.-P., L'Espérance, G., & Martin, É. (2025). Effect of Vibratory Peening Parameters on Surface Properties of Ti-6Al-4 V Titanium Alloy: Experimental and Statistical Approach. Journal of Materials Engineering and Performance, 15 pages. Lien externe
Pezeshki, L., Sadeghian, H., Mohebbi, A., Keshmiri, M., & Haddadin, S. (2025). Personalized Assistance in Robotic Rehabilitation: Real-Time Adaptation via Energy-Based Performance Monitoring. IEEE Transactions on Automation Science and Engineering, 22, 13298-13309. Lien externe
Pillot, C., Wang, X., Mallinos, A., Ritzman, T. F., Floccari, L. V., Schwend, R. M., & Aubin, C.-É. (2025). Biomechanical analysis of 3D correction and bone-screw forces as a function of rod insertion sequence and orientation relative to the sagittal plane in adolescent idiopathic scoliosis instrumentation. Clinical Biomechanics, 128, 106618 (9 pages). Lien externe
Qiao, N., Villemure, I., Aubin, C.-É., & Solorzano Barrera, C. (2025). Assessment of Local Pelvic Bone Volumetric Density and Cortical Thickness Using Multi-Energy Bi-Planar Radiography. Journal of Musculoskeletal and Neuronal Interactions, 25(4), 371-376. Lien externe
Rafiee, M., Fallah, A., Hosseini Rad, S., & Labrosse, M. R. (2025). Compression, impact and residual strength after impact properties of graphene/fiberglass/epoxy multiscale composites. Composites Communications, 53, 102254 (8 pages). Disponible
Richard, C., François, M., Fede, L., & Hébert, A. (2025). Development of a computational scheme based on the DRAGON5 code for the neutronic study of VVER-type reactor rods and assemblies. Annals of Nuclear Energy, 211, 110961 (8 pages). Lien externe
Rishmawi, S., Moyne, L., Serroud, S., Rodríguez, S., Chinesta, F., Tuysuz, O., & Gosselin, F. (2025). Parameter identification of a nonlinear vertical axis rotating machine through reduced order modeling and data assimilation. Nonlinear Dynamics. Lien externe
Risso, G., Isbled, M., Mélançon, D., & Bertoldi, K. (2025). Twisting-induced instabilities in double-helix chiral rods. Physical Review Letters, 135(1), 018202 (6 pages). Lien externe
Rochefort-Beaudoin, T., Vadean, A., Aage, N., & Achiche, S. (2025). Structural design through reinforcement learning. Engineering Applications of Artificial Intelligence, 161, 112273 (13 pages). Lien externe
Rochefort-Beaudoin, T., Vadean, A., Achiche, S., & Aage, N. (2025). From density to geometry: instance segmentation for reverse engineering of optimized structures. Engineering Applications of Artificial Intelligence, 141, 109732 (20 pages). Disponible
Saghaei, M., Fotsing, E. R., Ross, A., & Fradette, L. (2025). Scale-up High Internal Phase Pickering Emulsions in stirred tank. Process Safety and Environmental Protection. Lien externe
Savoldelli, J. M., Talebloo, M., & Tuysuz, O. (2025). A new data processing and synchronization method for measuring in-process machine tool spindle vibrations using non-contact sensors. Mechanical Systems and Signal Processing, 236, 113040 (17 pages). Lien externe
Schenke, S., Sewerin, F., van Wachem, B., & Denner, F. (2025). Wave-DNA: a software tool for simulating nonlinear acoustic waves emitted by moving boundaries. SoftwareX, 30, 102101 (6 pages). Disponible
Shams, S., Paraschivoiu, I., Madahi, M., & Karimibadrabadi, E. (2025). Wind turbine ice throw dynamics and aerodynamic interactions: A 6-DOF computational and statistical model for unsafe area identification. Cold Regions Science and Technology, 104630. Lien externe
Shaw, K. A., O. Sullivan, M., Wang, X., & Aubin, C.-É. (2025). Biomechanical Principles of Spinal Deformity Correction in the Thoracolumbar Spine. The Journal of the American Academy of Orthopaedic Surgeons. Lien externe
Sibille, A., Ashkbous Esfahani, M., Doublet, L. H. C., Farahani, R. D., Binet, F., Bodkhe, S., Therriault, D., & Keivanpour, S. (2025). The sustainability of recycled polylactic acid via fused filament fabrication: environmental impacts across cycles. The International Journal of Advanced Manufacturing Technology, 14 pages. Lien externe
Skjøth-Rasmussen, J., Lukacova, S., Johnsen, M., Massetti, M., Aubin, C.-É., Ström, O., Lestelle, D., & Muhic, A. (2025). P12.30.a epidemiology and treatment patterns in midh oligodendrogliomas and diffuse astrocytomas: a longitudinal nationwide cohort perspective. Neuro-Oncology, 27(Supplement), iii122-iii122. Lien externe
Sylvestre, É., Charron, D., Lefebvre, X., Bédard, É., & Prévost, M. (2025). Leveraging regulatory monitoring data for quantitative microbial risk assessment of Legionella pneumophila in cooling towers. Science of The Total Environment, 975, 179293 (13 pages). Disponible
Talebloo, M., & Tuysuz, O. (2025). An in-process dominant vibration mode frequencies identification model for thin-walled parts using a microphone. The International Journal of Advanced Manufacturing Technology, 11 pages. Lien externe
Tonellato, G., Kummert, M., Candanedo, J. A., Beaudry, G., & Pasquier, P. (2025). A model-based continuous commissioning method for an efficient integration of ground source heat pumps in the building ecosystem. Energy and Buildings, 333, 115492 (15 pages). Disponible
Toussaint, B., & Raison, M. (2025). Real-time trajectory prediction of a ping-pong ball using a GRU-TAE. Applied Intelligence, 55(5), 21 pages. Lien externe
Tucny, J.-M., Leclaire, S., Vidal, D., & Bertrand, F. (2025). On the Invalidity of the Extended Navier-Stokes Equations to Compute Rarefied Gas Flows in a Cylinder Array. International journal of computational fluid dynamics, 1-18. Lien externe
Varela De Albuquerque Dupke, A., Pessard, É., Mellé, D., Ross, A., & Brochu, M. (2025). Novel high cycle vibration-based fatigue test for pure shear loading. International Journal of Fatigue, 109180 (14 pages). Lien externe
Verville, M., & Therriault, D. (2025). High-performance and geometrically complex parts via co-extrusion additive manufacturing of multi-scale continuous carbon fiber-reinforced thermoplastic composites. Composites Part B Engineering, 310, 113179. Lien externe
Wang, X., Imbleau-Chagnon, G., Caouette, C., Larson, A. N., & Aubin, C.-É. (2025). Biomechanical modeling and assessment of patient positioning to facilitate spinal deformity instrumentation. Computer Methods in Biomechanics & Biomedical Engineering, 1-10. Lien externe
Yalman, A., Jafari, A., Léger, E., Mastroianni, M.-A., Teimouri, K., Savoji, H., Collins, D. L., Kadem, L., & Xiao, Y. (2025). Design, manufacturing, and multi-modal imaging of stereolithography 3D printed flexible intracranial aneurysm phantoms. Medical Physics, 52(2), 742-749. Lien externe
Yang, B., Béguin, C., Causse, P., Feng, Y., & Wang, J. (2025). Tomographic modeling and internal structure analysis of engineering textiles: A parametric approach. Composite Structures, 352, 17 pages. Lien externe
Yang, B., Feng, Y., Béguin, C., Causse, P., & Wang, J. (2025). Open source tool for Micro-CT aided meso-scale modeling and meshing of complex textile composite structures. Composites Science and Technology, 259, 110940 (11 pages). Lien externe
Zeng, M., Feng, M., Mayer, J. R. R., Bitar-Nehme, E., & Duong, X. T. (2025). Machine learning models for predicting volumetric errors based on scale and master balls artefact probing data. CIRP Journal of Manufacturing Science and Technology, 59, 135-157. Disponible
Zeng, M., Mayer, J. R. R., Feng, M., Bitar-Nehme, E., & Truong Duong, X. (2025). Comparison of Two Machine Learning Models for Predicting Volumetric Errors From On-The-Fly R-Test Type Device Data and Virtual End Point Constraints. Journal of Machine Engineering, 25, 5-19. Lien externe
Zhang, R., Guan, M., Wang, Z., Li, M., Liu, X., Liu, X., Zhang, C., & Sun, Q. (2025). Calcium ion-enhanced physically double-crosslinked starch-sodium alginate hydrogels: A sustainable approach for improving the quality of thermally sterilized rice noodles. International Journal of Biological Macromolecules, 319, 145568 (11 pages). Lien externe
Zhu, X., Viggiano, B., Minnick, B., & Gayme, D. F. (2025). Restricted nonlinear simulations of flow over riblets: Characterizing drag reduction and its breakdown. International Journal of Heat and Fluid Flow, 116, 109862 (13 pages). Disponible
Brodeur, J., Rahier, E., Chartray-Pronovost, M., Robert, É., Moutanabbir, O., & Kéna-Cohen, S. (2025). Current Crowding in a High-Efficiency Black Phosphorus Light-Emitting Diode Using a Reflective Back Contact. [Commentaire ou lettre]. PubMed, 7 pages. Lien externe
Monajati, L., Vadean, A., & Boukhili, R. (2025). Mechanical Behavior of Adhesively Bonded Joints Under Tensile Loading: A Synthetic Review of Configurations, Modeling, and Design Considerations [Commentaire ou lettre]. Materials, 18(15), 3557-3557. Lien externe
Wang, M., Zhao, S., Shi, C., Guyot, M.-C., Liao, M., Tauer, J. T., Willie, B. M., Cobetto, N., Aubin, C.-É., Küster-Schöck, E., Drapeau, P., Zhang, J., Wu, N., & Kibar, Z. (2025). Erratum: Planar cell polarity zebrafish models of congenital scoliosis reveal underlying defects in notochord morphogenesis [Commentaire ou lettre]. Development, 152(3). Lien externe
Latimier, C. (2025). Numerical analysis of Raptor engine's combustion chamber. (Rapport technique n° MECH-6191). Lien externe
Raison, M., Sbolci, L., & Clark, E. (2025). Design and manufacturing of a 3D-printed anchorage for dynamic orthotic devices. (Rapport technique). Lien externe
Abanobi, E. A., Sabiston, T., Tangestani, R., Pendurti, S., Natarajan, A., & Martin, É. (mars 2025). Temperature-Sensitive Isotropic Sintering Model for 316L Binder Jetting Parts [Communication écrite]. 154th Annual Meeting & Exhibition of The Minerals, Metals & Materials Society (TMS 2025), Las Vegas, NV, USA. Publié dans The minerals, metals & materials series. Lien externe
Arnould, B., & Laurendeau, É. (juillet 2025). CHAMPS' Contributions to the Eight Drag Prediction Workshop Buffet Working Group [Communication écrite]. AIAA Aviation forum and ascend 2025, Las Vegas, NV, USA. Lien externe
Arnould, B., & Laurendeau, É. (janvier 2025). CHAMPS' Fixed Grid RANS Simulations at Fifth High Lift Prediction Workshop [Communication écrite]. AIAA SCITECH 2025 Forum, Orlando, FL, USA. Lien externe
Bienvenue, C., Naceur, A., Carrier, J.-F., & Hébert, A. (avril 2025). Robust positive and monotone schemes on nonorthogonal quadratures for highly anisotropic scattering [Communication écrite]. International Conference on Mathematics and Computational Methods Applied to Nuclear Science and Engineering (M&C 2025), Denver, CO, USA. Publié dans Proceedings of the International Conference on Mathematics and Computational Methods Applied to Nuclear Science and Engineering, M and C 2025. Lien externe
Birglen, L. (juin 2025). A Compliant Q² Linkage to Model the Human Lower Limb Motion [Communication écrite]. 13th CCToMM Symposium on Mechanisms, Machines, and Mechatronics (CCToMM M^3Symposium), Ottawa, ON, Canada. Publié dans Mechanisms and machine science. Lien externe
Cordelier, O., Diouane, Y., Bartoli, N., & Laurendeau, É. (juillet 2025). Multi-Fidelity Constrained Bayesian Optimization with Application to Aircraft Wing Design [Communication écrite]. AIAA Aviation forum and ascend 2025, Las Vegas, NV, USA. Lien externe
Desgagnes, L., Tangestani, R., Miao, H., Natarajan, A., Rudloff, R., Pendurti, S., Bitar-Nehme, E., & Martin, É. (mars 2025). A Layer-By-Layer FEM Curing Model for Binder Jetting of 316L [Communication écrite]. 154th Annual Meeting & Exhibition of The Minerals, Metals & Materials Society (TMS 2025), Las Vegas, NV, USA. Publié dans The minerals, metals & materials series. Lien externe
Donegan, K., Fernandes, L. J. W., Hébert, A., Eaton, M. D., Latimer, C., Wilson, S. G., & Kophazi, J. (avril 2025). Subgroup and Resonance Spectrum Expansion Self-Shielding Methods Using a Discontinuous Isogeometric Analysis Discrete Ordinate Discretisation of the Neutron Transport Equation [Communication écrite]. International Conference on Mathematics and Computational Methods Applied to Nuclear Science and Engineering (M&C 2025), Denver, CO, USA. Publié dans Proceedings of the International Conference on Mathematics and Computational Methods Applied to Nuclear Science and Engineering, M and C 2025. Lien externe
El Hajj, E., Rastegar Dehkordi, N., Flores Salinas, M., Fotsing, E. R., Ross, A., & Vidal, D. (mai 2025). Validation of a numerical approach for predicting sound absorption in porous materials [Communication écrite]. 188th meeting of the acoustical society of america, New Orleans, LA, USA. Publié dans The Journal of the Acoustical Society of America, 157(4_Suppleme). Lien externe
Étienne, S., Béguin, C., Mougang Kouangue, E. J., & Couty, N. (juin 2025). Simulation of Wave Breaking Impact Forces on Walls Using the Cahn-Hilliard Navier-Stokes Equations [Communication écrite]. The 35th International Ocean and Polar Engineering Conference, Seoul, Korea. Lien externe
Guasch, R., Huet, C., Hébert, A., Béguin, C., & Marleau, G. (avril 2025). Coupled Neutronics and Thermal Hydraulics Simulations of a BWR Fuel Channel in the Version5 Environment [Communication écrite]. International Conference on Mathematics and Computational Methods Applied to Nuclear Science and Engineering (M&C 2025), Denver, CO, USA. Publié dans Proceedings of the International Conference on Mathematics and Computational Methods Applied to Nuclear Science and Engineering, M and C 2025. Lien externe
Guenoun, S., & Vo, H. D. (juin 2025). Laboratory to Assess the Effect of Flow Velocity on Temperature Measurements [Communication écrite]. ASEE Annual Conference & Exposition (ASEE 2025), Montréal, Québec. Lien externe
Guenoun, S., Gosselin, F., Vétel, J., & Zioui, N. (juin 2025). Laboratoire inversé en génie mécanique | Flipped Laboratory in Mechanical Engineering [Communication écrite]. Canadian Engineering Education Association (CEEA), Montreal, Qc, Canada (7 pages). Publié dans Proceedings of the ... CEEA Conference. Lien externe
Jean, R. J. M., Braun, O., Monette, C., Nennemann, B., & Gosselin, F. (octobre 2023). Acoustic-structure interaction in disk-disk configurations in water for high head pump-turbines [Communication écrite]. 9th IAHR Meeting of the WorkGroup on Cavitation and Dynamic Problems in Hydraulic Machinery and Systems, Timisoara, Romania (7 pages). Publié dans IOP Conference Series Earth and Environmental Science, 1483(1). Disponible
Khazaee, S., Bitar-Nehme, E., Boukhili, R., Kostenov, J., Regnaud, W., & Martin, É. (mars 2025). Development of an Environmentally Friendly and Low-Cost Binder for 17-4PH Metal Part Printing via Fused Deposition Modeling [Communication écrite]. 154th Annual Meeting & Exhibition of The Minerals, Metals & Materials Society (TMS 2025), Las Vegas, NV, USA. Publié dans The minerals, metals & materials series. Lien externe
Machach, S., & Hébert, A. (avril 2025). Response Matrix Equivalence Method Based on Relaxed Flux Continuity Equation and its Application to Reflector Homogenization for Diffusion Calculations [Communication écrite]. International Conference on Mathematics and Computational Methods Applied to Nuclear Science and Engineering (M&C 2025), Denver, CO, USA. Publié dans Proceedings of the International Conference on Mathematics and Computational Methods Applied to Nuclear Science and Engineering, M and C 2025. Lien externe
Messaoudi, A., Durel, A., Touboul, J., Couty, N., Étienne, S., Béguin, C., & Ezeta, R. (juin 2025). Predicting the Global Shape of a Breaking Solitary Wave Impacting a Wall [Communication écrite]. 35th International Ocean and Polar Engineering Conference, Seoul, Korea. Lien externe
Montazerijouybari, M., Baron, L., & Kelouwani, S. (février 2025). Path Tracking Error Minimization of Differential Drive Wheel Mobile Robot Carrying Off-Center Heavy Load [Communication écrite]. 11th International Conference on Mechatronics and Robotics Engineering (ICMRE 2025), Lille, France. Lien externe
Moradi, M., Karimialavijeh, H., Bitar-Nehme, E., & Martin, É. (mars 2025). Printability and Green Mechanical Properties of Binder Jet Additive Manufactured Co–Cr–Mo Parts [Communication écrite]. 154th Annual Meeting & Exhibition of The Minerals, Metals & Materials Society (TMS 2025), Las Vegas, NV, USA. Publié dans The minerals, metals & materials series. Lien externe
Périé-Curnier, D., & Curnier, D. (mai 2025). Prediction of the mechanical properties of the myocardium from CMR clinical type protocol in acute lymphoblastic leukemia survivors [Communication écrite]. ISMRM & ISMRT Annual Meeting (ISMRM-ISMRT 2025), Honolulu, Hawaii, USA. Publié dans Proceedings of the International Society for Magnetic Resonance in Medicine, Scientific Meeting and Exhibition. Lien externe
Périé-Curnier, D., Bedoux, A., & Leclaire, S. (mai 2025). Geometry-prescribed 2D-CFD model to analyse left ventricular blood flow under stress from cycle ergometer CMR. [Communication écrite]. ISMRM & ISMRT Annual Meeting (ISMRM-ISMRT 2025), Honolulu, Hawaii, USA. Publié dans Proceedings of the International Society for Magnetic Resonance in Medicine, Scientific Meeting and Exhibition. Lien externe
Quenedey, E., Nennemann, B., Monette, C., Ruchonnet, N., & Gosselin, F. (octobre 2023). Numerical and analytical estimation of the hydrodynamic coefficients of a radial seal under whirling vibrations [Communication écrite]. 9th IAHR Meeting of the WorkGroup on Cavitation and Dynamic Problems in Hydraulic Machinery and Systems, Timisoara, Romania (6 pages). Publié dans IOP Conference Series Earth and Environmental Science, 1483(1). Disponible
Benkiran, A. (2025). Comparaison de deux méthodes de Boltzmann sur réseau et modélisation préliminaire de l'impact de gouttelettes [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Busho, M. (2025). Analysis of Energy Flexibility Strategies for Residential and Commercial Building Clusters Through Simulation [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Cholet, A. (2025). Development of a Versatile Exploration and Optimization Tool for the Conceptual Design of Serial Robot Manipulators [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Coulombel, P. (2025). Simulating Cavitation Bubble Dynamics: Acoustic Interactions and Characterization of the Onset of Cavitation [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Desgagnés, L. (2025). Heat Transfer Model for Powder Bed Temperature Management of the Binder Jetting Printing Process [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Faucher, J. (2025). Décarbonation des bâtiments existants avec des pompes à chaleur géothermiques haute température [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Gay, M. (2025). Biomechanical Impact of Intraoperative Correction and Bone Maturity on Long-Term Outcomes in Pediatric Lumbar VBT [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Kandolo, C. J. (2025). Ability of a Camera to Define a Line of Sight Through a Ball Center for Machine Tool and Industrial Robot Calibration [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Laperle, V. (2025). Kalman Filter-based Digital Twin Framework for Anomaly Detection and System Identification of a Pipe Conveying Fluid [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Paquette-Greenbaum, S. (2025). AI-Accelerated Predictions of Aerodynamic Coefficients for Helicopter Blades [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Rigal, J. (2025). Development of a Coupled RANS-Stochastic Lagrangian Particle Model for Contrail Formation [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Zachariah, R. A. (2025). Quantum Algorithms for Simulating 2D Flows through Porous Media using the Lattice Boltzmann Method [Mémoire de maîtrise, Polytechnique Montréal]. Disponible
Abda, M. (2025). The Finite Element Neural Network Method: Solving Petrov-Galerkin Finite Element Formulation with Neural Networks Leveraging Non-Vanishing Test Functions [Thèse de doctorat, Polytechnique Montréal]. Disponible
Bezerra Câmara Filho, P. C. (2025). Profil NACA0015 soumis à un écoulement à bulles : influence du confinement et du taux de vide [Thèse de doctorat, Polytechnique Montréal]. Disponible
Mbaye, K. A. A. (2025). Modélisation des systèmes de pompe à chaleur à débit de réfrigérant variable [Thèse de doctorat, Polytechnique Montréal]. Disponible
Ndiaye, E. H. A. A. (2025). Conservative Immersed Boundary Method for Three-Dimensional Compressible Flows Simulation in Complex Geometries [Thèse de doctorat, Polytechnique Montréal]. Disponible
Rishmawi, S. (2025). Parameterized Model Order Reduction and Data Assimilation towards a Digital Twin of a Vertical Axis Rotating Machine [Thèse de doctorat, Polytechnique Montréal]. Disponible
Toussaint, B. (2025). Développement d'un système collaboratif de tennis de table basé sur un bras robotique de bureau intégrant l'intelligence artificielle [Thèse de doctorat, Polytechnique Montréal]. Disponible
Zeng, M. (2025). Machine learning models for predicting volumetric and machining errors of five-axis machine tools [Thèse de doctorat, Polytechnique Montréal]. Disponible
Taghizadeh, M., Taghizadeh, A., Yazdi, M. K., Zarrintaj, P., Stadler, F. J., Ramsey, J. D., Habibzadeh, S., Hosseini Rad, S., Naderi, G., Saeb, M. R., Mozafari, M., & Schubert, U. S. (2025). Correction: chitosan-based inks for 3D printing and bioprinting. Green Chemistry, 27(18), 5388-5388. Disponible
Coulombel, P., & Denner, F. (2025). Prediction of the critical tension required for cavitation onset in transient pressure fields [Ensemble de données]. Lien externe
Gennari, G., Gorges, C., Denner, F., & van Wachem, B. (2025). Data repository for the paper: A marching cubes based method for topology changes in three-dimensional two-phase flows with front tracking [Ensemble de données]. Lien externe
Jain, A., Denner, F., & van Wachem, B. (2025). Data for the paper "Self-sorting of bidisperse particles in evaporating sessile droplets" [Ensemble de données]. Lien externe
Johra, H., Le Dréau, J., Kummert, M., Arteconi, A., Henze, G., Mugnini, A., Busho, M., Saberi Derakhtenjani, A., Heidari, R., Kırant-Mitic, T., Petrucci, A., Jiang, Z., Dong, B., Kubenthiran, J., Zavřel, V., El Kontar, R., Polly, B., Diller, T., & Corbin, C. (2025). A collection of 85 datasets of buildings and building clusters performing demand response – common exercise IEA EBC annex 82 [Ensemble de données]. Lien externe
Laperle, V., Ghorbani, E., Dollon, Q., & Gosselin, F. (2025). Digital twin of a pipe conveying fluid: flow rate anomaly detection and quantification via multi-fidelity kalman filters and event based cameras signals [Ensemble de données]. Lien externe
Schieppati, D., Fattahi, S. K., Blais, B., Boffito, D. C., & Denner, F. (2025). Acoustic wave propagation in liquid medium and damping mechanisms: modeling and simulation. Dans Kerboua, K. (édit.), Modeling and Simulation of Sono-Processes (p. 35-57). Lien externe
