 | Up a level |
Abanobi, E. A., Sabiston, T., Tangestani, R., Pendurti, S., Natarajan, A., & Martin, É. (2025, March). Temperature-Sensitive Isotropic Sintering Model for 316L Binder Jetting Parts [Paper]. 154th Annual Meeting & Exhibition of The Minerals, Metals & Materials Society (TMS 2025), Las Vegas, NV, USA. Published in The minerals, metals & materials series. External link
Arnould, B., & Laurendeau, É. (2025, January). CHAMPS' Fixed Grid RANS Simulations at Fifth High Lift Prediction Workshop [Paper]. AIAA SCITECH 2025 Forum, Orlando, FL, USA. External link
Arslan, D., Mihai, M., Therriault, D., & Lévesque, M. (2025). Flexural properties of sandwich panels fabricated by filament-extrusion of high-temperature thermoplastic composites. Composites Science and Technology, 263, 111106 (12 pages). External link
Arslan, D., Mihai, M., Therriault, D., & Lévesque, M. (2025). Formulation and characterization of polyetherimide composites reinforced with recycled carbon fibers and thermal black particles for Fused filament fabrication. Composites Part A Applied Science and Manufacturing, 194, 108946 (12 pages). External link
Beaini, R., Dupont, F., Dumont, A., Robert, É., Sapieha, J.-E., & Martinu, L. (2025). Surface temperature and emissivity assessment in an enclosed cavity at high temperature using IR thermography. Infrared Physics & Technology, 105815. External link
Bennoune, R., Chen, G., Tagne, S.-C. T., Vissière, A., Damak, M., Mehdi-Souzani, C., Anwer, N., Mayer, J. R. R., & Nouira, H. (2025). Advanced ultra-high precision system (NanoCyl) for accurate cylindricity measurements. CIRP journal of manufacturing science and technology, 59, 118-126. External link
Berthet, L., Blais, P., Nennemann, B., Monette, C., & Gosselin, F. (2025). Mode split prediction for rotating disks with flexible stator coupling. Journal of Fluids and Structures, 132, 18 pages. External link
Bienvenue, C., Naceur, A., Carrier, J.-F., & Hébert, A. (2025). A Flexible, Moment-Preserving, and Monotone Discretization of the Multidimensional Angular Fokker–Planck Operator. Nuclear Science and Engineering, 1-18. External link
Bienvenue, C., Naceur, A., Hébert, A., & Carrier, J.-F. (2025). Toward Highly Accurate Multigroup Coupled Photon-Electron-Positron Cross-Sections for the Boltzmann Fokker-Planck Equation. Journal of Computational Physics, 524, 113740 (29 pages). External link
Chakraborty, A., Lalh, M., Martin, É., Karimialavijeh, H., Bejarano, A., Wessman, A., Zou, Y., & Habibnejad-Korayem, M. (2025). Influence of carbon on the rheology and additive manufacturability of Ti-6Al-4 V powders. Materials & Design, 113833. External link
Chang, T., Pommée, T., Ross, A., & Verduyckt, I. (2025). The Influence of the Visual Design of Spaces on Female Speakers' Vocal Effort: An Exploratory Study. Journal of Voice. External link
Chayer, M., Phan, P., Arnoux, P.-J., Wang, Z., Rawlinson, J., Aruwajoye, O., & Aubin, C.-É. (2025). Understanding the influence of cage and instrumentation strategies with oblique lumbar interbody fusion for grade I spondylolisthesis – A comprehensive biomechanical modeling study. The Spine Journal. External link
Constantineau, C., Deschênes, P.-A., Dubois, R., & Brochu, M. (2025). Fatigue strength prediction of 410NiMo stainless steel with surrogate weld discontinuities. International Journal of Fatigue, 108955. External link
da Silveira, S. R., Collet, L., Haque, S., Lapierre, L., Bagniewska-Zadworna, A., Smith, R. S., Gosselin, F., Routier-Kierzkowska, A.-L., & Kierzkowski, D. (2025). Mechanical interactions between tissue layers underlie plant morphogenesis. Nature Plants. External link
Dega Kougoum, C. O., Jadidinia, A., & Boukhili, R. (2025). A Study on the Effect of an Oxidizing Atmosphere During the Recycling of CFRP by Pyrolysis. Fibers, 13(5), 58-58. External link
Desgagnes, L., Tangestani, R., Miao, H., Natarajan, A., Rudloff, R., Pendurti, S., Bitar-Nehme, E., & Martin, É. (2025, March). A Layer-By-Layer FEM Curing Model for Binder Jetting of 316L [Paper]. 154th Annual Meeting & Exhibition of The Minerals, Metals & Materials Society (TMS 2025), Las Vegas, NV, USA. Published in The minerals, metals & materials series. External link
Dollon, Q., Ghorbani, E., & Gosselin, F. (2025). Bayesian input-state-parameter inference of hydrodynamic bearings: From partial displacement measurements to force reconstruction. Mechanical Systems and Signal Processing, 230, 112610 (16 pages). External link
El-Jakl, M., & Laberge Lebel, L. (2025). Fibre waviness reduction in thermoplastic pultrusion by using DREF yarns. Composites Part B: Engineering, 288, 111908. Available
Elsemen, O., Beauséjour, M., Lorange, J.-P., Sassine, S., Théroux, J., Barchi, S., Joncas, J., Le May, S., Fortin, C., Aubin, C.-É., Parent, S., Cobetto, N., Ishimo, M.-C., & Labelle, H. (2025). My orthopedic brace inventory (MOBI): a new, reliable, and valid questionnaire to identify barriers to brace adherence in adolescent idiopathic scoliosis treatment. Spine deformity, 10 pages. External link
Fan, L., Durocher, A., Bergthorson, J. M., Fond, B., Savard, B., & Vena, P. (2025). Investigation on the structure of high Ka flames using simultaneous thermographic PIV and OH-PLIF. Combustion and Flame, 275, 114072 (16 pages). External link
Gennari, G., Gorges, C., Denner, F., & van Wachem, B. (2025). Data repository for the paper: A marching cubes based method for topology changes in three-dimensional two-phase flows with front tracking [Dataset]. External link
Gonzalez-Villagomez, J., Esau, G.-V., Mayer, J. R. R., Rodríguez-Donate, C., & Xing, K. (2025). Novel cylindrical representation of the STFT for signal analysis. Electronics Letters, 61(1), 4 pages. Available
Gorges, C., Evrard, F., Chiodi, R., van Wachem, B., & Denner, F. (2025). Sharp front tracking with geometric interface reconstruction. Journal of Computational Physics, 535, 114059 (21 pages). External link
Jadayel, M., & Khameneifar, F. (2025). Increasing 3D Printing Accuracy Through Convolutional Neural Network-Based Compensation for Geometric Deviations. Machines, 13(5), 382-382. External link
Jain, A., Denner, F., & van Wachem, B. (2025). Data for the paper "Self-sorting of bidisperse particles in evaporating sessile droplets" [Dataset]. External link
Janodet, R., Wachem, B. , & Denner, F. (2025). A fully-coupled algorithm with implicit surface tension treatment for interfacial flows with large density ratios. Journal of Computational Physics, 520, 113520 (22 pages). Available
Jean, R. J. M., Braun, O., Monette, C., Nennemann, B., & Gosselin, F. (2023, October). Acoustic-structure interaction in disk-disk configurations in water for high head pump-turbines [Paper]. 9th IAHR Meeting of the WorkGroup on Cavitation and Dynamic Problems in Hydraulic Machinery and Systems, Timisoara, Romania (7 pages). Published in IOP Conference Series Earth and Environmental Science, 1483(1). External link
Jobin, O., Chartray-Pronovost, M., Kaprolat, W., & Robert, É. (2025). Hypergolic ignition of hybrid rocket fuels in a slab burner experiment. Combustion and Flame, 274, 113948 (14 pages). External link
Khanzode, D., Thomieres, A., Jha, R., Duchalais, É., Baron, L., Pîslă, D., & Chablat, D. (2025). Optimization of design parameters for a flexible endoscopic surgical tool using medical imaging data for minimally invasive surgery (MIS). Mechanism and Machine Theory, 209, 105987 (18 pages). External link
Khatami, N., Caraus, I., Rahaman, M., Nepotchatykh, E., Elbakry, M., Elremaly, W., Franco, A., Beauséjour, M., Laberge, A.-M., Parent, S., Labelle, H., Aubin, C.-É., Lachaine, J., & Moreau, A. (2025). Genome-wide profiling of circulating microRNAs in adolescent idiopathic scoliosis and their relation to spinal deformity severity, and disease pathophysiology. Scientific Reports, 15(1), 11 pages. Available
Khazaee, S., Bitar-Nehme, E., Boukhili, R., Kostenov, J., Regnaud, W., & Martin, É. (2025, March). Development of an Environmentally Friendly and Low-Cost Binder for 17-4PH Metal Part Printing via Fused Deposition Modeling [Paper]. 154th Annual Meeting & Exhibition of The Minerals, Metals & Materials Society (TMS 2025), Las Vegas, NV, USA. Published in The minerals, metals & materials series. External link
Lassus, A., Therriault, D., Favis, B. D., & Virgilio, N. (2025). Tailoring the morphology in partially and fully miscible mixtures of PEEK and PEI. Polymer, 128315. External link
Lefebvre, X., Ashok, V., Claveau-Mallet, D., Robert, É., & Bédard, É. (2025). Data-driven cooling tower optimization: A comprehensive analysis of energy savings using microsand filtration. Applied Thermal Engineering, 258(Part C), 124736 (13 pages). External link
Lefebvre, X., Chartray-Pronovost, M., Duchaine, C., Bédard, É., Prévost, M., & Robert, É. (2025). Evaporation of aerosol droplets from contaminated cooling tower water. Physics of Fluids, 37(2), 023365 (16 pages). External link
McNeill, J., VanDyk, R., Simha, C. H. M., Dadouche, A., Bäckman, D., Ensan, M. N., & Gholipour, J. (2025). Modeling Impact of Drones on Flat Plates. Aerospace Science and Technology, 161, 110103 (15 pages). External link
Meulemans, M., Durocher, A., Versailles, P., Bourque, G., & Bergthorson, J. M. (2025). Calibration techniques for quantitative NO measurement using Laser-Induced Fluorescence. Journal of Quantitative Spectroscopy and Radiative Transfer, 330, 109221. External link
Montazerijouybari, M., Baron, L., & Kelouwani, S. (2025, February). Path Tracking Error Minimization of Differential Drive Wheel Mobile Robot Carrying Off-Center Heavy Load [Paper]. 11th International Conference on Mechatronics and Robotics Engineering (ICMRE 2025), Lille, France. External link
Moradi, M., Karimialavijeh, H., Bitar-Nehme, E., & Martin, É. (2025, March). Printability and Green Mechanical Properties of Binder Jet Additive Manufactured Co–Cr–Mo Parts [Paper]. 154th Annual Meeting & Exhibition of The Minerals, Metals & Materials Society (TMS 2025), Las Vegas, NV, USA. Published in The minerals, metals & materials series. External link
Ndiaye, E. H. A. A., Trépanier, J.-Y., Sousa, R. H., & Leclaire, S. (2025). Conservative Immersed Boundary Methods on Cartesian grids for inviscid compressible flows simulation. International Journal of Heat and Fluid Flow, 114, 109775 (15 pages). External link
Ouadday, R., Vadean, A., Okda, Y. E., Boukhili, R., & Abusrea, M. (2025). Experimental investigation of moisture absorption and mechanical properties of GFRP laminates for stay vane extensions. Journal of Composite Materials. External link
Pezeshki, L., Sadeghian, H., Mohebbi, A., Keshmiri, M., & Haddadin, S. (2025). Personalized Assistance in Robotic Rehabilitation: Real-Time Adaptation via Energy-Based Performance Monitoring. IEEE Transactions on Automation Science and Engineering, 22, 13298-13309. External link
Quenedey, E., Nennemann, B., Monette, C., Ruchonnet, N., & Gosselin, F. (2023, October). Numerical and Analytical Estimation of the Hydrodynamic Coefficients of a Radial Seal under Whirling Vibrations [Paper]. 9th IAHR Meeting of the WorkGroup on Cavitation and Dynamic Problems in Hydraulic Machinery and Systems, Timisoara, Romania (6 pages). Published in IOP Conference Series Earth and Environmental Science, 1483(1). External link
Rafiee, M., Fallah, A., Hosseini Rad, S., & Labrosse, M. R. (2025). Compression, impact and residual strength after impact properties of graphene/fiberglass/epoxy multiscale composites. Composites Communications, 53, 102254 (8 pages). External link
Richard, C., François, M., Fede, L., & Hébert, A. (2025). Development of a computational scheme based on the DRAGON5 code for the neutronic study of VVER-type reactor rods and assemblies. Annals of Nuclear Energy, 211, 110961 (8 pages). External link
Rishmawi, S., Moyne, L., Serroud, S., Rodríguez, S., Chinesta, F., Tuysuz, O., & Gosselin, F. (2025). Parameter identification of a nonlinear vertical axis rotating machine through reduced order modeling and data assimilation. Nonlinear Dynamics. External link
Schenke, S., Sewerin, F., van Wachem, B., & Denner, F. (2025). Wave-DNA: A software tool for simulating nonlinear acoustic waves emitted by moving boundaries. SoftwareX, 30, 102101 (6 pages). External link
Schieppati, D., Fattahi, S. K., Blais, B., Boffito, D. C., & Denner, F. (2025). Acoustic wave propagation in liquid medium and damping mechanisms: modeling and simulation. In Kerboua, K. (ed.), Modeling and Simulation of Sono-Processes (pp. 35-57). External link
Shaw, K. A., O. Sullivan, M., Wang, X., & Aubin, C.-É. (2025). Biomechanical Principles of Spinal Deformity Correction in the Thoracolumbar Spine. The Journal of the American Academy of Orthopaedic Surgeons. External link
Sibille, A., Ashkbous Esfahani, M., Doublet, L. H. C., Farahani, R. D., Binet, F., Bodkhe, S., Therriault, D., & Keivanpour, S. (2025). The sustainability of recycled polylactic acid via fused filament fabrication: environmental impacts across cycles. The International Journal of Advanced Manufacturing Technology, 14 pages. External link
Sylvestre, É., Charron, D., Lefebvre, X., Bédard, É., & Prévost, M. (2025). Leveraging regulatory monitoring data for quantitative microbial risk assessment of Legionella pneumophila in cooling towers. Science of The Total Environment, 975, 179293 (13 pages). External link
Taghizadeh, M., Taghizadeh, A., Yazdi, M. K., Zarrintaj, P., Stadler, F. J., Ramsey, J. D., Habibzadeh, S., Hosseini Rad, S., Naderi, G., Saeb, M. R., Mozafari, M., & Schubert, U. S. (2025). Correction: Chitosan-based inks for 3D printing and bioprinting. Green Chemistry (1), 1 page. External link
Talebloo, M., & Tuysuz, O. (2025). An in-process dominant vibration mode frequencies identification model for thin-walled parts using a microphone. The International Journal of Advanced Manufacturing Technology, 11 pages. External link
Tonellato, G., Kummert, M., Candanedo, J. A., Beaudry, G., & Pasquier, P. (2025). A model-based continuous commissioning method for an efficient integration of ground source heat pumps in the building ecosystem. Energy and Buildings, 333, 115492 (15 pages). External link
Toussaint, B., & Raison, M. (2025). Real-time trajectory prediction of a ping-pong ball using a GRU-TAE. Applied Intelligence, 55(5), 21 pages. External link
Tucny, J.-M., Leclaire, S., Vidal, D., & Bertrand, F. (2025). On the Invalidity of the Extended Navier-Stokes Equations to Compute Rarefied Gas Flows in a Cylinder Array. International journal of computational fluid dynamics, 1-18. External link
Wang, M., Zhao, S., Shi, C., Guyot, M.-C., Liao, M., Tauer, J. T., Willie, B. M., Cobetto, N., Aubin, C.-É., Küster-Schöck, E., Drapeau, P., Zhang, J., Wu, N., & Kibar, Z. (2025). Erratum: Planar cell polarity zebrafish models of congenital scoliosis reveal underlying defects in notochord morphogenesis [Discussion or Letter]. Development, 152(3). External link
Wang, X., Imbleau-Chagnon, G., Caouette, C., Larson, A. N., & Aubin, C.-É. (2025). Biomechanical modeling and assessment of patient positioning to facilitate spinal deformity instrumentation. Computer Methods in Biomechanics & Biomedical Engineering, 1-10. External link
Yang, B., Béguin, C., Causse, P., Feng, Y., & Wang, J. (2025). Tomographic modeling and internal structure analysis of engineering textiles: A parametric approach. Composite Structures, 352, 17 pages. External link
Yang, B., Feng, Y., Béguin, C., Causse, P., & Wang, J. (2025). Open source tool for Micro-CT aided meso-scale modeling and meshing of complex textile composite structures. Composites Science and Technology, 259, 110940 (11 pages). External link
Zeng, M., Feng, M., Mayer, J. R. R., Bitar-Nehme, E., & Duong, X. T. (2025). Machine learning models for predicting volumetric errors based on scale and master balls artefact probing data. CIRP journal of manufacturing science and technology, 59, 135-157. External link
