<  Back to the Polytechnique Montréal portal

Items where Division is "Department of Mechanical Engineering"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors | Document subtype | No Grouping
Jump to: A | B | C | D | E | F | G | H | K | L | M | N | O | P | Q | R | S | T | V | X | Y
Number of items: 266.

A

Achiche, S., Appio, F. P., McAloone, T. C., & Di Minin, A. (2013). Fuzzy decision support for tools selection in the core front end activities of new product development. Research in Engineering Design, 24(1), 1-18. External link

Adankon, M. M., Chihab, N., Dansereau, J., Labelle, H., & Cheriet, F. (2013). Scoliosis follow-up using noninvasive trunk surface acquisition. IEEE Transactions on Biomedical Engineering, 60(8), 2262-2270. External link

Adouni, M., & Shirazi-Adl, A. (2013, January). Alterations in knee joint muscle activation and tissue stresses-strains during gait associated with knee osteoarthritis [Paper]. 59th Annual Orthopaedic Research Society Meeting, (ORS 2013), San Antonio, Texas. External link

Adouni, M., & Shirazi-Adl, A. (2013, August). Computational biomechanics of the knee joint in gait - Osteoarthritic and asymptomatic subjects [Paper]. 19th Congress of the European Society of Biomechanics (ESB 2013), Patras, Greece. External link

Adouni, M., & Shirazi-Adl, A. (2013). Consideration of equilibrium equations at the hip joint alongside those at the knee and ankle joints has mixed effects on knee joint response during gait. Journal of Biomechanics, 46(3), 619-624. External link

Adouni, M., & Shirazi-Adl, A. (2013, January). Consideration of hip moments along knee and ankle moments during gait affects mainly the force partitioning between muscles and not the knee response [Paper]. 59th Annual Orthopaedic Research Society Meeting, (ORS 2013), San Antonio, Texas. External link

Adouni, M., & Shirazi-Adl, A. (2013, September). Human knee joint muscle forces and tissue stresses-strains in gait : asymptomatic versus severe osteoarthritic subjects [Paper]. 37th Annual Meeting of the American Society of Biomechanics (ABS 2013, Omaha, NE, USA. Unavailable

Adouni, M., Shirazi-Adl, A., & Marouane, H. (2013, September). Gastrocnemius activation level markedly influences ACL force [Paper]. 37th Annual Meeting of the American Society of Biomechanics (ABS 2013, Omaha, NE, USA. Unavailable

Aïssa, B., Nedil, M., Habib, M. A., Haddad, E., Jamroz, W., Therriault, D., Coulibaly, Y., & Rosei, F. (2013). Fluidic patch antenna based on liquid metal alloy/single-wall carbon-nanotubes operating at the S-band frequency. Applied Physics Letters, 103(6), 063101 (5 pages). Available

Aïssa, B., Therriault, D., Haddad, E., Jamroz, W., Tagziria, K., Loiseau, J., Higgins, A., Khan, M. A., & Hoa, S. V. (2013, June). Mitigating the effects of space debris on composite structures embedding self healing and carbon nanotube nanocomposite materials [Paper]. 4th International Conference on Self-Healing Materials, Ghent, Belgium. Unavailable

Aissiou, M., Périé-Curnier, D., Gervais, J., & Trochu, F. (2013). Development of a progressive dual kriging technique for 2D and 3D multi-parametric MRI data interpolation. Computer Methods in Biomechanics and Biomedical Engineering: Imaging & Visualization, 1(2), 69-78. External link

Al-Mangour, B., Dallala, R., Zhim, F., Mongrain, R., & Yue, S. (2013). Fatigue behavior of annealed cold-sprayed 316L stainless steel coating for biomedical applications. Materials Letters, 91, 352-355. External link

Allard, Y., Kummert, M., & Moreau, A. (2013, June). Detailed monitoring of energy use in residential spas [Paper]. CLIMA 2013, the 11th REHVA World Congress, Praguek Czech Republic. Unavailable

Alloui, Z., & Vasseur, P. (2013). Convection of a binary fluid in a shallow porous cavity heated and salted from the sides. Computers and Fluids, 81, 85-94. External link

Alloui, Z., & Vasseur, P. (2013). Fully developed mixed convection of a binary fluid in a vertical porous channel. Canadian Journal of Chemical Engineering, 91(1), 127-135. External link

Alloui, Z., & Vasseur, P. (2013). Onset of Marangoni convection and multiple solutions in a power-law fluid layer under a zero gravity environment. International Journal of Heat and Mass Transfer, 58(1-2), 43-52. External link

Alloui, Z., Ben Khelifa, N., Beji, H., Vasseur, P., & Guizani, A. (2013). The onset of convection of power-law fluids in a shallow cavity heated from below by a constant heat flux. Journal of Non-Newtonian Fluid Mechanics, 196, 70-82. External link

Alloui, Z., Vasseur, P., Costa, V. A. F., & Sousa, A. C. M. (2013). Effect of a non-constant magnetic field on natural convection in a horizontal porous layer heated from the bottom. Journal of Engineering Mathematics, 81(1), 141-155. External link

Amini, S., Mortazavi, F., Sun, J., Lévesque, M., Hoemann, C. D., & Villemure, I. (2013). Stress relaxation of swine growth plate in semi-confined compression: Depth dependent tissue deformational behavior versus extracellular matrix composition and collagen fiber organization. Biomechanics and Modeling in Mechanobiology, 12(1), 67-78. External link

Ammar, S. (2013). Design conceptuel d'un avion "Blended Wing Body" de 200 passagers [Master's thesis, École Polytechnique de Montréal]. Available

Appio, F. P., Achiche, S., McAloone, T. C., & Howard, T. J. (2013). An inquiry on managers use of decision-making tools in the core front end of the innovation process. International Journal of Product Development, 18(6), 461-491. External link

Aramesh, M., Shi, B., Balazinski, M., Attia, H. A., & Kishawy, H. (2013, May). On the tribological aspects of machining of titanium metal matrix composites (TI-MMCs) [Paper]. 2nd International Conference on Virtual Machining Process Technology (VMPT 2013), Hamilton, Ontario, Canada. Unavailable

Aramesh, M., Shi, B., Nassef, A. O., Attia, H., Balazinski, M., & Kishawy, H. A. (2013, June). Meta-modeling optimization of the cutting process during turning titanium metal matrix composites (Ti-MMCs) [Paper]. 14th CIRP Conference on Modeling of Machining Operations (CIRP CMMO 2013), Turin, Italy. External link

Arguin, M., Sirois, F., & Therriault, D. (2013, September). Electric field alignement of multi-wall carbon nanotuves in epoxy matrix in order to establish preferential current path flows [Paper]. Composites Week@Leuven, Leuven, Belgium. Unavailable

Arguin, M., Sirois, F., & Therriault, D. (2013, July). Impact of carbon nanotubes on electrical conductivity of carbon fiber multiscale composites [Paper]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. External link

Arjmand, N., Ekrami, O., Shirazi-Adl, A., Plamondon, A., & Parnianpour, M. (2013, August). Neural network and regression estimations of spine loads and muscle forces in lifting tasks [Paper]. 19th Congress of the European Society of Biomechanics (ESB 2013), Patras, Greece. External link

Arjmand, N., Ekrami, O., Shirazi-Adl, A., Plamondon, A., & Parnianpour, M. (2013). Relative performances of artificial neural network and regression mapping tools in evaluation of spinal loads and muscle forces during static lifting. Journal of Biomechanics, 46(8), 1454-1462. External link

Arjmand, N., Rajaee, M. A., Shirazi-Adl, A., Plamondon, A., & Parnianpour, M. (2013, August). Comparison of predicted spine loads by four lifting analysis tools and a regression model [Paper]. 19th Congress of the European Society of Biomechanics (ESB 2013), Patras, Greece. External link

Arreguin-Zavala, J., Vasilevskiy, D., Turenne, S., & Masut, R. A. (2012, July). Microwave sintering of Bi₂Te₃- and PbTe-based alloys: Structure and thermoelectric properties [Paper]. ICT/ECT Joint Conference 2012, Aalborg, Denmark. Published in Journal of Electronic Materials, 42(7). External link

Aubin, C.-É., Sarwark, J. F., Schmid, E., & Parent, S. (2013). Fusionless vertebral physeal device and method. (Patent no. US8409258). External link

B

Ballaz, L., Raison, M., & Detrembleur, C. (2013). Decomposition of the Vertical Ground Reaction Forces During Gait on a Single Force Plate. Journal of Musculoskeletal & Neuronal Interactions, 13(2), 236-243. External link

Beausoleil-Morrison, I., Macdonald, F., Kummert, M., Jost, R., & McDowell, T. (2013, August). Co-simulation between ESP-r and TRNSYS: More highly resolved modelling of integrated building and energy systems [Paper]. BS 2013. 13th Conference of the International Building Performance Simulation Association, Chambery, France. Unavailable

Becker, M. (2013). Analyse du procédé et des paramètres de fabrication par écriture-direct assistée par lumière ultraviolet pour des applications d'emmagasinage d'énergie mécanique [Master's thesis, École Polytechnique de Montréal]. Available

Béguin, C., Pelletier, E., & Étienne, S. (2013, June). Added mass in a bubbly flow : void fraction and wall influence [Paper]. Annual Meeting of the Canadian Applied and Industrial Mathematics Society (CAIMS), Québec, Québec. Unavailable

Behrang, A., Grmela, M., Dubois, C., Turenne, S., & Lafleur, P. (2013). Influence of particle-matrix interface, temperature, and agglomeration on heat conduction in dispersions. Journal of Applied Physics, 114(1). External link

Bejjani, R., Balazinski, M., & Attia, H. (2013, May). Analysis of crack initiation and evolution when turning titanium MMC using a quick stop device and finite element simulation [Paper]. 2nd International Conference on Virtual Machining Process Technology (VMPT 2013), Hamilton, Ontario, Canada. Unavailable

Bianco, R. J., Arnoux, P. J., Mac-Thiong, J. M., Wagnac, E., & Aubin, C.-É. (2013, September). Biomechanical Analysis of Pedicle Screw Pullout Strength [Paper]. 38th congress of the Société de biomécanique, Marseille, France. Published in Computer Methods in Biomechanics and Biomedical Engineering, 16(Supp 1). External link

Billotte, C., Bernard, F. M., & Ruiz, E. (2013). Chemical shrinkage and thermomechanical characterization of an epoxy resin during cure by a novel in situ measurement method. European Polymer Journal, 49(11), 3548-3560. External link

Billotte, C., Fellah, C., & Ruiz, E. (2013, July). Chemical shrinkage and thermomechanical characterization of different resin systems and prepregs during cure by a novel in situ measurement method [Paper]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. External link

Birglen, L., & Ruella, C. (2013, August). Traversability analysis of a novel one-DOF robotic leg [Paper]. ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Portland, OR, USA. External link

Biron, G., Vadean, A., & Tudose, L. (2013). Optimal design of interference fit assemblies subjected to fatigue loads : a sequential approximate multi-objective optimization approach. Structural and Multidisciplinary Optimization, 47(3), 441-451. External link

Boisclair, D., Aubin, C.-É., & Arnoux, P. J. (2013, September). Cervical spine mobility : beyond measurements of head rotations [Paper]. 3rd International Conference on SIMulation technologies in BIO-Sciences and Multiphysics (SimBio-M), Coventry, England. Unavailable

Boyer, L., Shen, J., Kadoury, S., & Aubin, C.-É. (2013, October). Évaluation de méthodes de mesure de la rotation axiale de vertèbres scoliotiques [Paper]. 43e Réunion annuelle de la Société de la scoliose du Québec, Montréal, Québec. Unavailable

C

Camelot, A., Mascle, C., & Baptiste, P. (2013, July). Disassembly of Spare Parts on an EOL Aircraft [Paper]. IEEE International Symposium on Assembly and Manufacturing (ISAM 2013), Xi'an, China. External link

Cammarata, M., Aubin, C.-É., Wang, X., & Mac-Thiong, J.-M. (2013, October). Facteurs biomécaniques de risque de la cyphose jonctionnelle proximale : une analyse numérique détaillée des variables d'instrumentation chrurgicale [Paper]. 43e Réunion annuelle de la Société de la scoliose du Québec, Montréal, Québec. Unavailable

Cartiaux, O., Banse, X., Paul, L., Francq, B. G., Aubin, C.-É., & Docquier, P. L. (2013). Computer-Assisted Planning and Navigation Improves Cutting Accuracy During Simulated Bone Tumor Surgery of the Pelvis. Computer Aided Surgery, 18(1-2), 19-26. External link

Causse, P., Ruiz, E., & Trochu, F. (2013). Influence of Preforming on the Quality of Curved Composite Parts Manufactured by Flexible Injection. International Journal of Material Forming, 6(3), 341-362. External link

Causse, P., Ruiz, E., & Trochu, F. (2013, July). Processing warpage of asymmetric composite panels manufactured by resin transfer molding [Paper]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. External link

Ceresara, S., Fanciulli, C., Passaretti, F., & Vasilevskiy, D. (2012, July). Texturing of (Bi₀.₂Sb₀.₈)₂Te₃ nanopowders by open die pressing [Paper]. ICT/ECT Joint Conference 2012, Aalborg, Denmark. Published in Journal of Electronic Materials, 42(7). External link

Cevik, M. (2013). Axial Compressor Gas Path Design for Desensitization of Aerodynamic Performance and Stability to Tip Clearance [Ph.D. thesis, École Polytechnique de Montréal]. Available

Charette, É. (2013). Étude des défauts apparaissant dans les aménagements intérieurs des avions d'affaires [Master's thesis, École Polytechnique de Montréal]. Available

Charette, E., Fotsing, E. R., Billotte, C., Ruiz, E., & Grenier, D. (2013, July). Effect of humidity and temperature on the curing and aging of a room temperature epoxy adhesive [Paper]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. External link

Charreton, C., Béguin, C., Yu, R., & Étienne, S. (2013, July). Stability Derivatives in a Parallel Triangular Tube Bundle Subject to Cross-Flow at Moderated Reynolds Number [Paper]. ASME Pressure Vessels and Piping Conference (PVP 2013), Paris, France (10 pages). External link

Chatel, T., Lévesque, M., & Therriault, D. (2013, May). Influence of fiber orientation on the out-of-plane viscoelastic response of laminated composites used in satellite applications [Paper]. 9th International conference on mechanics of time-dependent materials, Montréal, Québec. Unavailable

Cimmino, M., & Bernier, M. (2013, August). Preprocessor for the generation of g-functions used in the simulation of geothermal systems [Paper]. 13th Conference of International Building Performance Simulation Association (IBPSA), Chambéry, France. External link

Cimmino, M., Bernier, M., & Adams, F. (2013). A contribution towards the determination of g-functions using the finite line source. Applied Thermal Engineering, 51(1-2), 401-412. External link

Cimmino, M., Bernier, M., & Cauret, O. (2013, June). Validation d'un modèle pour la simulation de capteurs géothermiques compacts [Paper]. XIème Colloque Inter-universitaire Franco-Québécois sur la thermique des systèmes (CIFQ 2013), Reims, France. Unavailable

Cincou, A. (2013, June). An Innovative and Interactive Approach to Teaching Industrial Drawing to Engineering Students [Paper]. Canadian Engineering Education Association (CEEA13) Conference, Montréal, QC. Published in Proceedings of the ... CEEA Conference. External link

Clerc, T. (2013). Méthodes d'optimisation des paramètres 2D du réflecteur dans un réacteur à eau pressurisée [Master's thesis, École Polytechnique de Montréal]. Available

Clerc, T., Hébert, A., Leroyer, H., Argaud, J.-P., Ponçot, A., & Bouriquet, B. (2013, May). Presentation of the merc work-flow for the computation of a 2D radial reflector in a PWR [Paper]. International Conference on Mathematics and Computational Methods Applied to Nuclear Science and Engineering, M and C 2013, Sun Valley, ID, United States. Unavailable

Clin, J., Aubin, C.-É., & Parent, S. (2013, October). Analyse biomécanique du potentiel de correction à long terme la scoliose d'un nouveau dispositif intravertébral sans fusion [Paper]. 43e Réunion annuelle de la Société de la scoliose du Québec, Montréal, Québec. Unavailable

Clin, J., Aubin, C.-É., & Parent, S. (2014, November). Biomechanical analysis of scoliosis correction using a novel fusionless intravertebral epiphyseal device [Paper]. 7th International Congress on Early Onset Scoliosis and Growing Spine (ICEOS), San Diego, CA, USA. Unavailable

Cobetto, N., Aubin, C.-É., Desbiens-Blais, F., Le May, S., Clin, J., Labelle, H., & Parent, S. (2013, September). New optimized braces using computer - assisted design and modeling are lighter and more comfortable than standard TLSO braces in teh treatment of AIS [Paper]. 48th Scoliosis Research Society Annual Meeting, Lyon, France. Unavailable

Cobetto, N., Aubin, C.-É., Le May, S., Desbiens-Blais, F., Clin, J., & Parent, S. (2013, May). Conception d'un corset orthopédique confortable et biomécaniquement efficace pour le traitement de la scoliose idiopathique [Paper]. 33e journée de la recherche du POES et de la division d'orthopédie de l'Université de Montréal, Montréal, Québec. Unavailable

Corbeil-Letourneau, S., Étienne, S., Yu, R.-K., Hay, A., & Pelletier, D. (2013, June). 3D simulations of the galloping of square cylinders in cross-flow at low reynolds numbers: Influence of the aspect ratio [Paper]. 23rd International Offshore and Polar Engineering Conference, ISOPE 2013, Anchorage, AK, United states. Unavailable

Crochon, T., Dulong, S., Li, C., & Lévesque, M. (2013, July). Time-temperature behavior of a thermo-setting polymer matrix [Paper]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. External link

D

D'Avignon, K., & Kummert, M. (2013, August). Comparison of system-level simulation and detailed models for storage tanks with phase change materials [Paper]. BS 2013. 13th Conference of International Building Performance Simulation Association, Chambéry, France. External link

D'Ercole, M., Auvinet, É., Cartiaux, O., & Aubin, C.-É. (2013, May). Mesure automatique intra-opératoire des déformations 3D du rachis scoliotique [Paper]. 33e journée de la recherche du POES et de la division d'orthopédie de l'Université de Montréal, Montréal, Québec. Unavailable

Delcroix, B., Kummert, M., Daoud, A., & Hiller, M. (2013, August). Improved conduction transfer function coefficients generation in TRNSYS multizone building model [Paper]. BS 2013. 13th Conference of the International Building Performance Simulation Association, Chambery, France. External link

Delfour, M. C., & Garon, A. (2011, September). Quadratic ODE and PDE models of drug release kinetics from biodegradable polymers [Paper]. 25th IFIP TC 7 Conference on System Modeling and Optimization, CSMO 2011, Berlin, Germany. External link

Desbiens-Blais, F., Joncas, J., Beausejour, M., Moreau, A., Larouche, G., Lacroix, G., Mac-Thiong, J. M., Labelle, H., Aubin, C.-É., & Parent, S. (2013, September). Different brace treatment outcomes : making the case for biological endophenotypes classification AIS patients [Paper]. 48th Scoliosis Research Society Annual Meeting, Lyon, France. Unavailable

Desrochers-Perreault, F., Aubin, C.-É., Wang, X., & Schwend, R. M. (2013, October). Analyse biomécanique d'instrumentation du rachis scoliotique avec vis iliaques [Paper]. 43e Réunion annuelle de la Société de la scoliose du Québec, Montréal, Québec. Unavailable

Detuncq, B. (2013). Enseignement de la combustion dans l'optique du développement durable. Proceedings of the Canadian Engineering Education Association (CEEA), 4 pages. External link

Dipasquale, C., D'Antoni, M., Fedrizi, R., Kummert, M., & Marletta, L. (2013, January). Procedure for buildings' energy modelling suited for integrated control simulation [Paper]. BSA2013, the 1st IBPSA, Bozen-Bolzano, Italie. External link

Driscoll, M., Aubin, C.-É., Moreau, A., Wakula, Y., Amini, S., & Parent, S. (2013). Novel hemi-staple for the fusionless correction of pediatric scoliosis : influence on intervertebral discs and growth plates in a porcine model. Journal of Spinal Disorders & Techniques. Unavailable

Drolet, M., Vo, H. D., & Mureithi, N. W. (2013). Effect of Tip Clearance on the Prediction of Nonsynchronous Vibrations in Axial Compressors. Journal of Turbomachinery, 135(1). External link

Dulong, S., Lévesque, M., Li, C., & Vadean, A. (2013, July). Experimental investigation of physical aging effect of the mechanical properties of a carbon/polyimide braided composite [Paper]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. External link

Dumas, M. (2013). Développement d'une méthode de simulation de pompage au sein d'un compresseur multi-étagé [Master's thesis, École Polytechnique de Montréal]. Available

E

El Mourid, A., Ganesan, R., & Lévesque, M. (2013). Comparison between analytical and numerical predictions for the linearly viscoelastic behavior of textile composites. Mechanics of Materials, 58, 69-83. External link

El Mourid, A., Ganesan, R., & Lévesque, M. (2013, July). Time and temperature influence on the failure of textile composites [Paper]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. External link

El Ouaaid, Z., Shirazi-Adl, A., Arjmand, N., & Plamondon, A. (2013). Coupled objective function to study the role of abdominal muscle forces in lifting using the kinematics-driven model. Computer Methods in Biomechanics and Biomedical Engineering, 16(1), 54-65. External link

El Ouaaid, Z., Shirazi-Adl, A., Plamondon, A., & Lariviere, C. (2013). Trunk Strength, Muscle Activity and Spinal Loads in Maximum Isometric Flexion and Extension Exertions: a Combined in Vivo-Computational Study. Journal of Biomechanics, 46(13), 2228-2235. External link

Eslami Nejad, P., & Bernier, M. (2013). A preliminary assessment on the use of phase change materials around geothermal boreholes. ASHRAE Transactions, 119(2), 312-321. Unavailable

Étienne, S., Plante, F., Hay, A., Pelletier, D., Cori, J.-F., & Garon, A. (2013, June). Plunging and heaving airfoils: Imposed forward motion or self-propulsion? [Paper]. 43rd AIAA Fluid Dynamics Conference, San Diego, CA, United States. External link

F

Farah, A. (2013). Comportement en fatigue de joints d'aluminium 7075-T6 soudés par friction-malaxage et parachevés [Ph.D. thesis, École Polytechnique de Montréal]. Available

Farahani, R. D., & Therriault, D. (2013, July). Electrical conductivity of hybrid/patterned nanocomposites films [Paper]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. External link

Farahani, R. D., Sapieha, J.-E., & Therriault, D. (2013, September). Improvement of electrical conductivity in polymer nanocomposites featuring heterogeneous nanofillers distribution [Paper]. 28th Annual Technical Conference of the American Society for Composites (ASC 2013), State College, PA, United states. External link

Favre, A. (2013). Caractérisation de l'effet du vieillissement en milieu aqueux sur les propriétés mécaniques de composites à matrice élastomère. [Master's thesis, École Polytechnique de Montréal]. Available

Favre, A., Fotsing, E. R., Ruiz, E., & Lévesque, M. (2013, July). Underwater accelerated aging of elastomeric composite materials [Paper]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. External link

Foley, G., Aubin, C.-É., Parent, S., Labelle, H., D'Astous, J., Johnston, C., & Sanders, J. (2013). Physical significance of the rib vertebra angle difference and its 3D counterpart in early onset. Spine Deformity, 1(4), 259-265. External link

Fotsing, E. R., Sola, M., Ross, A., & Ruiz, E. (2013). Lightweight damping of composite sandwich beams: Experimental analysis. Journal of Composite Materials, 47(12), 1501-1511. External link

Fotsing, E. R., Sola, M., Ruiz, E., & Ross, A. (2013, July). Mechanical properties of composite sandwich structures with core or face sheet discontinuities [Paper]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. External link

Franca, R., Zhang, X.-F., Veres, T., Yahia, L., & Sacher, E. (2013). Core-shell nanoparticles as prodrugs: Possible cytotoxicological and biomedical impacts of batch-to-batch inconsistencies. Journal of Colloid and Interface Science, 389(1), 292-297. External link

G

Galvan, S., Reggio, M., & Guibault, F. (2013, July). Inlet velocity profile optimization of the turbine 99 draft tube [Paper]. ASME Fluids Engineering Division Summer Meeting (FEDSM 2013), Incline Village, NV, United states. External link

Gariepy, A., Bridier, F., Hoseini, M., Bocher, P., Perron, C., & Lévesque, M. (2013). Experimental and numerical investigation of material heterogeneity in shot peened aluminium alloy AA2024-T351. Surface and Coatings Technology, 219, 15-30. External link

Gariepy, A., Larose, S., Perron, C., Bocher, P., & Lévesque, M. (2013). Erratum: On the Effect of the Peening Trajectory in Shot Peen Forming. Finite Elements in Analysis and Design, 74, 111-111. External link

Gariepy, A., Larose, S., Perron, C., Bocher, P., & Lévesque, M. (2013). On the effect of the orientation of sheet rolling direction in shot peen forming. Journal of Materials Processing Technology, 213(6), 926-938. External link

Gariepy, A., Larose, S., Perron, C., Bocher, P., & Lévesque, M. (2013). On the effect of the peening trajectory in shot peen forming. Finite Elements in Analysis and Design, 69, 48-61. External link

Gariepy, M., Malouin, B., Trépanier, J.-Y., & Laurendeau, É. (2013). Far-field drag decomposition applied to the drag prediction workshop 5 cases. Journal of Aircraft, 50(6), 1822-1831. External link

Gariepy, M., Malouin, B., Trépanier, J.-Y., & Laurendeau, É. (2013, June). Far-field drag decomposition method applied to the DPW-5 test cases results [Paper]. 31st AIAA Applied Aerodynamics Conference, San Diego, CA, United states. External link

Gariepy, M., Trépanier, J.-Y., & Malouin, B. (2013). Generalization of the far-field drag decomposition method to unsteady flows. AIAA Journal, 51(6), 1309-1319. External link

Ghossein, E., & Lévesque, M. (2013, July). Numerical validation of homogenization models for the case of ellipsoidal particles reinforced composites [Paper]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. External link

Ghossein, E., & Lévesque, M. (2013). Random Generation of Periodic Hard Ellipsoids Based on Molecular Dynamics: a Computationally-Efficient Algorithm. Journal of Computational Physics, 253, 471-490. External link

Grmela, M., Grazzini, G., Lucia, U., & Yahia, L. (2013). Multiscale Mesoscopic Entropy of Driven Macroscopic Systems. Entropy, 15(11), 5053-5064. Available

Grmela, M., Grazzini, G., Lucia, U., & Yahia, L. (2013). Multiscale mesoscopic entropy of driven macroscopic systems. Entropy, 15(11), 5053-5064. External link

Guérin, N. (2013). Conception et fabrication d'un séparateur de particules hélicoïdal par impression tridimensionnelle [Master's thesis, École Polytechnique de Montréal]. Available

Guerin, N., Lévesque, M., & Therriault, D. (2013, May). Dual helix dielectrophoretic cell separator fabricated using the direct-write spindle deposition technique [Paper]. Nanotechnology 2013: Electronics, Devices, Fabrication, MEMS, Fluidics and Computational - 2013 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2013, Washington, DC, United states. External link

Guo, S. Z., Heuzey, M.-C., & Therriault, D. (2013, July). Solvent-cast direct-write microfabrication of thermoplastic-based nanocomposite structures [Paper]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. External link

Guo, S., Gosselin, F., Guérin, N., Lanouette, A.-M., Heuzey, M.-C., & Therriault, D. (2013). Solvent-cast three-dimensional printing of multifunctional microsystems. Small, 9(24), 4118-4122. Available

Gutiérrez, J. (2013). Étude des vibrations mécaniques dans la fabrication des composites par injection sur renfort [Ph.D. thesis, École Polytechnique de Montréal]. Available

Gutiérrez, J., Ruiz, E., & Trochu, F. (2013). Exploring the behavior of glass fiber reinforcements under vibration-assisted compaction. Journal of the Textile Institute, 104(9), 980-993. External link

Gutierrez, J., Ruiz, E., & Trochu, F. (2013). High-frequency vibrations on the compaction of dry fibrous reinforcements. Advanced Composite Materials, 22(1), 13-27. External link

H

Hammoud, R. (2013). Loi constitutive chimioplastique pour le béton exposé aux hautes températures. [Ph.D. thesis, École Polytechnique de Montréal]. Available

Hammoud, R., Boukhili, R., & Yahia, A. (2013). Unified Formulation for a Triaxial Elastoplastic Constitutive Law for Concrete. Materials, 6(9), 4226-48. External link

Hammoud, R., Boukhili, R., & Yahia, A. (2013). Unified formulation for a triaxial elastoplastic constitutive law for concrete. Materials, 6(9), 4226-4248. Available

Harmouche, R., Cheriet, F., Labelle, H., & Dansereau, J. (2013). Multimodal image registration of the scoliotic torso for surgical planning. BMC Medical Imaging, 13. Available

Harmouche, R., Cheriet, F., Labelle, H., & Dansereau, J. (2013). Multimodal Image Registration of the Scoliotic Torso for Surgical Planning. BMC Medical Imaging, 13. External link

Harmouche, R., Cheriet, F., Labelle, H., & Dansereau, J. (2013, February). Patient-specific model of a scoliotic torso for surgical planning [Paper]. Medical Imaging 2013: Image-Guided Procedures, Robotic Interventions, and Modeling, Lake Buena Vista, FL, United states (7 pages). External link

Hasanzadeh, K., Laurendeau, É., & Paraschivoiu, I. (2013). Quasi-steady convergence of multistep navier-stokes icing simulations. Journal of Aircraft, 50(4), 1261-1274. External link

Hasanzadeh, K., Mosahebi, A., Laurendeau, É., & Paraschivoiu, I. (2013, June). Validation and verification of multi-steps icing calculation using CANICE2D-NS code [Paper]. 31st AIAA Applied Aerodynamics Conference, San Diego, CA, United states (28 pages). External link

Hassan, A., Patten, S. A., Villemure, I., Fendri, K., Grimard, G., Zaouter, C., Patent, S., Moreau, A., Labelle, H., & Moldovan, F. (2013, May). Facteurs métaboliques, stress biomécanique oestrogènes et impact sur ostéoblastes [Paper]. 33e journée de la recherche du POES et de la division d'orthopédie de l'Université de Montréal, Montréal, Québec. Unavailable

Hay, A., Étienne, S., Pelletier, D., & Garon, A. (2013, June). Code verification of an unsteady RANS finite-element solver [Paper]. 21st AIAA Computational Fluid Dynamics Conference, San Diego, CA, United states (12 pages). External link

Hébert, A. (2013, February). Dragon5: designing computational schemes dedicated to fission nuclear reactors for space [Paper]. International Conference on Nuclear and Emerging Technologies for Space, Albuquerque, NM. Unavailable

Hébert, A. (2013, October). Integration of the DRAGON5/DONJON5 codes in the SALOME platform for performing multi-physics calculations in nuclear engineering [Paper]. Joint International Conference on Supercomputing in Nuclear Applications and Monte Carlo 2013, SNA & MC 2013, Paris, France. External link

Hébert, A., & Leroyer, H. (2013, May). Application of the OPTEX method for computing reflector parameters [Paper]. International Conference on Mathematics and Computational Methods Applied to Nuclear Science and Engineering, M and C 2013, Sun Valley, ID, United States. Unavailable

Heidariroshani, H. (2013). Design of a passive mechanism for machining purpose [Master's thesis, École Polytechnique de Montréal]. Available

Horel, F. (2013). Modélisation analytique de l'amortissement des poutres composites sandwich contenant des couches viscoélastiques [Master's thesis, École Polytechnique de Montréal]. Available

K

Kang, H. S., Lee, K. H., & Mureithi, N. W. (2013, July). Instability of a Simply-Supported Cylinder Subjected to Annular Flow Over a Finite-Length at its Mid-Length [Paper]. ASME Pressure Vessels and Piping Conference (PVP 2013), Paris, France. External link

Kannan, S., Kishawy, H. A., & Balazinski, M. (2013). Analysis of two- and three-body abrasive wear during machining of aluminium-based metal matrix composite. International Journal of Materials and Product Technology, 46(1), 81-94. External link

Keivanpour, S., Ait Kadi, D., & Mascle, C. (2013, September). Aircraft End-of-Life problem in the context of green supply chain analysis (opportunities and challenges) [Paper]. SAE AeroTech Congress and Exhibition (AEROTECH 2013), Montréal, Québec. Unavailable

Keivanpour, S., Ait Kadi, D., & Mascle, C. (2013, September). Sustainable eco design strategy : developing a decision tool for aircraft manufacturers to compare eco-design alternatives considering stakeholders value network [Paper]. SAE AeroTech Congress and Exhibition (AEROTECH 2013), Montréal, Québec. Unavailable

Keivanpour, S., Ait-Kadi, D., & Mascle, C. (2013, November). Economic sustainability of end-of-life vehicle recycling infrastructure under uncertainty : a fuzzy approach [Paper]. International Conference on Industrial Engineering and Systems Management (IESM 2013), Rabat, Morroco. External link

Keivanpour, S., Ait-Kadi, D., & Mascle, C. (2013). Toward a strategic approach to end-of-life aircraft recycling projects : a research agenda in transdisciplinary context. Journal of Management and Sustainability, 3(3), 76-94. Available

Keivanpour, S., Mascle, C., & Ait-Kadi, D. (2013). Modeling robustness of business ecosystem of end of life vehicles players. Journal of Sustainable Development Studies, 4(1), 1-35. External link

Keshavarz, M. K., Vasilevskiy, D., Masut, R. A., & Turenne, S. (2012, July). P-Type bismuth telluride based composite thermoelectric materials produced by mechanical alloying and hot extrusion [Paper]. ICT/ECT Joint Conference 2012, Aalborg, Denmark. Published in Journal of Electronic Materials, 42(7). External link

Khakpour, H., & Birglen, L. (2013). Numerical analysis of the grasp configuration of a planar 3-DOF linkage-driven underactuated finger. Journal of Computational and Nonlinear Dynamics, 8(2). External link

Khalfi, B., & Ross, A. (2013). Influence of partial constrained layer damping on the bending wave propagation in an impacted viscoelastic sandwich. International Journal of Solids and Structures, 50(25-26), 4133-4144. External link

Khalfi, B., & Ross, A. (2013). Transient response of a plate with partial constrained viscoelastic layer damping. International Journal of Mechanical Sciences, 68, 304-312. External link

Klim, Z. H., Aramesh, M., Rimpault, X., & Balazinski, M. (2013, September). Wear Dependent tool reliability analysis during cutting titanium metal matrix composites (Ti-MMCs) [Paper]. SAE AeroTech Congress and Exhibition (AEROTECH 2013), Montréal, Québec. Published in SAE International Journal of Aerospace, 6(2). External link

L

Lakis, A. A., Esmailzadeh, M., & Toorani, M. (2013, June). Dynamic response on an open curved thin shell to random pressure field arising from a turbulent boundary layer [Paper]. International Conference on Structural Engineering Dynamics (ICEDyn 2013), Sesimba, Portugal. Unavailable

Lakis, A. A., Mahvash, A., & Toorani, M. (2013, June). Development of intelligent health monitoring systems for rotating machinery and structural components [Paper]. 4th International Conference on Integrity, Reliability & Failure, Funchal, Portugal. Unavailable

Lalonde, N. M., Petit, Y., Aubin, C.-É., Wagnac, E., & Arnoux, P.-J. (2013). Method to geometrically personalize a detailed finite-element model of the Spine. IEEE Transactions on Biomedical Engineering, 60(7), 2014-2021. External link

Langlois, A., Bernier, M., & Kummert, M. (2013, June). Modélisation d'un réservoir de stockage thermique utilisant un matériau à changement de phase [Paper]. XIème Colloque Inter-universitaire Franco-Québécois sur la thermique des systèmes (CIFQ 2013), Reims, France. Unavailable

Lanouette, A.-M., Hill, J., Demers-Dussault, P., Laurin, J.-J., & Therriault, D. (2013, May). 3D printing of double KA band helical micro-antennas [Paper]. Nanotechnology 2013: Electronics, Devices, Fabrication, MEMS, Fluidics and Computational - 2013 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2013, Washington, DC, United states. External link

Lapalme, M. (2013). Caractérisation des contraintes résiduelles engendrées par l'expansion à froid de trous dans des alliages d'aluminium [Master's thesis, École Polytechnique de Montréal]. Available

Lariviere, C., Mecheri, H., Shahvarpour, A., Gagnon, D., & Shirazi-Adl, A. (2013). Criterion Validity and Between-Day Reliability of an Inertial-Sensor-Based Trunk Postural Stability Test During Unstable Sitting. Journal of Electromyography and Kinesiology, 23(4), 899-907. External link

Larouche, L.-A., & Birglen, L. (2013). Assisted design of linkage-driven adaptive soft fingers. Industrial Robot, 40(4), 337-346. External link

Larson, A. N., Aubin, C.-É., Polly, D. W., Ledonio, C., Lonner, B. S., Shah, S. A., Sucato, D. J., Lenke, L. G., Richards, B. S., Erickson, M. A., Emans, J. B., Weinstein, S. L., & Implants Maximise Outcomes Study Groups, M. (2013). Are more screws better? A systematic review of anchor density and curve correction in adolescent idiopathic scoliosis. Spine Deformity, 1(4), 237-247. External link

Le Naveaux, F., Aubin, C.-É., Larson, N., & Labelle, H. (2013, October). Analyse biomécanique de la distribution d'implants pour le traitement de la scoliose idiopathique adolescente [Paper]. 43e Réunion annuelle de la Société de la scoliose du Québec, Montréal, Québec. Unavailable

Le Naveaux, F., Aubin, C.-É., Larson, N., Polly, D. W., Baghdadi, Y. M., Labelle, H., & Implants Maximise Outcomes Study Groups, M. (2013, July). How does pedicle screw distribution impact curve correction in Lenke 1 curves? [Paper]. 20th International Meeting on Advanced Spine Techniques (IMAST), Vancouver, British Columbia. External link

LeBel, F., Fanaei, A. E., Ruiz, E., & Trochu, F. (2013). Experimental characterization by fluorescence of capillary flows in dual-scale engineering fabrics. Textile Research Journal, 83(15), 1634-1659. External link

Leclaire, S. (2013). Étude d'un modèle de Boltzmann sur réseau pour la simulation assistée par ordinateur des fluides à plusieurs phases immiscibles [Ph.D. thesis, École Polytechnique de Montréal]. Available

Leclaire, S., Pellerin, N., Reggio, M., & Trépanier, J.-Y. (2013). Enhanced equilibrium distribution functions for simulating immiscible multiphase flows with variable density ratios in a class of lattice Boltzmann models. International Journal of Multiphase Flow, 57, 159-168. External link

Leclaire, S., Reggio, M., & Trépanier, J.-Y. (2013). Progress and Investigation on Lattice Boltzmann Modeling of Multiple Immiscible Fluids or Components With Variable Density and Viscosity Ratios. Journal of Computational Physics, 246, 318-342. External link

Leclerc, C., Fotsing, E. R., & Ross, A. (2013, July). Modal analysis of composite sandwich structures with viscoelastic layers [Paper]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. External link

Letellier, G., Parent, A., Raison, M., Marois, P., Mercier, C., Crevier, L., Laberge, M., & Ballaz, L. (2013, October). Twenty-five years of selective dorsal rhizotomy based on clinical observations instead of intraoperative electrophysiological monitoring: The Sainte-Justine hospital experience [Paper]. 28e Congrès de Médecine Physique et de Réadaptation, Reims, France. Published in Annals of Physical and Rehabilitation Medicine, 56(S1). External link

Luk-Cyr, J., Crochon, T., Li, C., & Lévesque, M. (2013). Interconversion of linearly viscoelastic material functions expressed as Prony series: A closure. Mechanics of Time-Dependent Materials, 17(1), 53-82. External link

Lux, Q. (2013). Calcul des coefficients aérodynamiques d'un avion complet par la méthode RANS [Master's thesis, École Polytechnique de Montréal]. Available

M

Mahaudens, P., Banse, X., Mousny, M., Raison, M., & Detrembleur, C. (2013). Very Short-Term Effect of Brace Wearing on Gait in Adolescent Idiopathic Scoliosis Girls. European Spine Journal, 22(11), 2399-2406. External link

Malouin, B., Trépanier, J.-Y., & Gariépy, M. (2013). Interpolation of Transonic Flows Using a Proper Orthogonal Decomposition Method. International Journal of Aerospace Engineering, 2013, 1-11. Available

Malouin, B., Trépanier, J.-Y., & Gariepy, M. (2013). Interpolation of transonic flows using a proper orthogonal decomposition method. International Journal of Aerospace Engineering, 2013, 11 pages. External link

Manac'h, Y. G., Périé-Curnier, D., Gilbert, G., & Beaudoin, G. (2013). Sensitivity of Multi-Parametric Mri to the Compressive State of the Isolated Intervertebral Discs. Magnetic Resonance Imaging, 31(1), 36-43. External link

Marouane, H., Shirazi-Adl, A., & Adouni, M. (2013, September). Compression force substantially increases the tibiofemoral joint passive stiffness and moment in sagittal and frontal planes [Paper]. 37th Annual Meeting of the American Society of Biomechanics (ABS 2013, Omaha, NE, USA. Unavailable

Marouene, A., Boukhili, R., Chen, J., & Yousefpour, A. (2013, April). Buckling analysis of variable stiffness composites plates under non-uniform compression loads using the differential quadrature method [Paper]. 1st International Symposium on Automated Composites Manufacturing, Montréal, Québec. Unavailable

Marouene, A., Boukhili, R., Chen, J., & Yousefpour, A. (2013, July). An experimental investigation on buckling behavior of variable angle tow laminates subjected to uniform compression load [Paper]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. External link

Martino, J., Aubin, C.-É., Labelle, H., Wang, X., & Parent, S. (2013). Biomechanical Analysis of Vertebral Derotation Techniques for the Surgical Correction of Thoracic Scoliosis. Spine, 38(2), E73-E83. External link

Mascle, C. (2013). Design for Rebirth (Dfrb) and Data Structure. International Journal of Production Economics, 142(2), 235-246. External link

Mascle, C. (2013). Product Design for Rebirth: Application to Aircraft Life Cycle Modeling. Supply Chain Forum, 14(2), 70-83. External link

Mascle, C., & Deneu, F. (2013, August). Environmental selection of materials for product end-of-life [Paper]. 19th International Conference on Engineering Design (ICED 2013), Seoul, South Korea. Unavailable

Masounave, J., Bailon, J.-P., & Dickson, J. I. (2013). Fatigue Crack Growth Laws. In Fatigue of Materials and Structures: Fundamentals (231-267). External link

Mehdi Zadeh, F., Trépanier, J.-Y., & Petro, E. (2013). Development and Validation of a New Boundary Condition for Intake Analysis with Distortion. International Journal of Aerospace Engineering, 2013, 1-12. Available

Mehdi Zadeh, F., Trépanier, J.-Y., & Petro, E. (2013). Development and validation of a new boundary condition for intake analysis with distortion. International Journal of Aerospace Engineering, 2013, 12 pages. External link

Menaa, M. (2013). Méthode des éléments finis hybride appliquée aux vibrations des coques sphériques [Ph.D. thesis, École Polytechnique de Montréal]. Available

Menaa, M., & Lakis, A. A. (2013). Hybrid finite element method applied to the analysis of free vibration of a spherical shell filled with fluid. (Technical Report n° EPM-RT-2013-04). Available

Menaa, M., & Lakis, A. A. (2013). Hybrid finite element method applied to the analysis of free vibration of spherical shell. (Technical Report n° EPM-RT-2013-02). Available

Ménard, A.-L., Valteau, B., Londono, I., Grimard, G., Moldovan, F., & Villemure, I. (2013, May). Les chargements dynamiques diminuent la croissance sans modifier l'histomorphométrie de la plaque de croissance [Paper]. 33e journée de la recherche du POES et de la division d'orthopédie de l'Université de Montréal, Montréal, Québec. Unavailable

Ménard, A.-L., Valteau, B., Londono, I., Moldovan, F., Grimard, G., & Villemure, I. (2013, May). Influence of dynamic compression parameters on bone growth modulation [Paper]. 2013 POSNA Annual meeting, Toronto, ON, Canada. Unavailable

Miao, H. Y., Gariepy, A., & Lévesque, M. (2013). Peen forming simulation of an A320 bottom wing skin panel #1. (Technical Report). Unavailable

Miron, P., Vétel, J., & Garon, A. (2013, June). Efficient computation of the finite-time Lyapunov exponent [Paper]. 21st AIAA Computational Fluid Dynamics Conference, San Diego, CA, USA. External link

Montesano, J., Fawaz, Z., Lévesque, M., & Poon, C. J. (2013, July). Predicting fatigue damage development for braided carbon fiber polymer matrix composites [Paper]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. External link

Mortazavi, F. (2013). Development of a Global Digital Image Correlation Approach for Fast High-Resolution Displacement Measurements [Ph.D. thesis, École Polytechnique de Montréal]. Available

Mortazavi, F., Canal, L. P., Gonzalez, C., Llorca, J., Villemure, I., & Lévesque, M. (2013, May). Fullfield micro-strain measurements in composites by a hybrid spectral approach [Paper]. Photomechanics, Montpellier, France. Unavailable

Mortazavi, F., Ghossein, E., Lévesque, M., & Villemure, I. (2013, July). 3D full-field displacements/strains measurements in composites at micro-scale [Paper]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Unavailable

Mortazavi, F., Ghossein, E., Lévesque, M., & Villemure, I. (2013, July). High resolution measurement of internal full-field displacements and strains using global spectral digital volume correlation [Paper]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. External link

Mortazavi, F., Lévesque, M., & Villemure, I. (2013). Image-based continuous displacement measurements using an improved spectral approach. Strain, 49(3), 233-248. External link

Moulin, D., Petit, Y., Périé-Curnier, D., Aubin, C.-É., & Parent, S. (2013, October). Étude d'une méthode non irradiante d'évaluation de la flexibilité rachidienne chez les adolescents avec scoliose idiopathique [Paper]. 43e Réunion annuelle de la Société de la scoliose du Québec, Montréal, Québec. Unavailable

Moussaddy, H. (2013). A New Definition of the Representative Volument Element in Numerical Homogenization Problems and its Application to the Performance Evaluation of Analytical Homogenization Models. [Ph.D. thesis, École Polytechnique de Montréal]. Available

Moussaddy, H., Therriault, D., & Lévesque, M. (2013). Assessment of existing and introduction of a new and robust efficient definition of the representative volume element. International Journal of Solids and Structures, 50(24), 3817-3828. Available

Moussaddy, H., Therriault, D., & Lévesque, M. (2013, July). Modeling elastic properties of randomly oriented fiber composites [Paper]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. External link

N

Noel, S., Liberelle, B., Yogi, A., Moreno, M. J., Bureau, M., Robitaille, L., & De Crescenzo, G. (2013). A non-damaging chemical amination protocol for poly(ethylene terephthalate)-application to the design of functionalized compliant vascular grafts. Journal of Materials Chemistry B, 1(2), 230-238. External link

Noriega, H., Reggio, M., & Vasseur, P. (2013). Natural convection of nanofluids in a square cavity heated from below. Computational Thermal Sciences, 5(4), 289-301. External link

O

Olivieri, P. (2013). Génération de chemins de couverture pour des opérations automatisées de contrôle non destructif appliquées dans l'industrie aérospatiale [Master's thesis, École Polytechnique de Montréal]. Available

Olivieri, P., & Birglen, L. (2013, April). Path planning for Eddy current inspection around probable defects [Paper]. 60th CASI Aeronautics Conference and AGM Aerospace Clusters (AERO 2013), Toronto, Ontario. Unavailable

Ouadday, R. (2013). Étude des structures sandwichs verre/époxy de grandes épaisseurs utilisées comme extension d'avant directrices de turbines hydroélectriques [Master's thesis, École Polytechnique de Montréal]. Available

Ouadday, R., Boukhili, R., & Vadean, A. (2013, October). Investigation of thick multicore sandwich constructions under low velocity impact and static indentation [Paper]. Symposium on Advances in Hydroelectric Turbine Manufacturing and Repair, Montréal, Québec. Unavailable

Ouellet, M. (2013). Conception axiomatique des joints hybrides à recouvrement simple en matériaux composites [Master's thesis, École Polytechnique de Montréal]. Available

Ouellet, M., & Vadean, A. (2013, June). Design improvement of hybrid composite joints by axiomatic design [Paper]. 7th International Conference on Axiomatic Design (ICAD2013), Worcester, NY United States. External link

Oulmane, A., Lakis, A. A., & Mureithi, N. W. (2013). A method for analyzing rotating machinery faults using time-frequency application. International Journal of Condition Monitoring and Diagnostic Engineering Management, 16(2), 21-34. External link

P

Pahlavan Pour, M. (2013). Multi Scale Modeling of The Elastic Properties of Polymer-Clay Nanocomposites [Ph.D. thesis, École Polytechnique de Montréal]. Available

Pahlavanpour, M., Hubert, P., & Lévesque, M. (2013, July). Homogenization models for Polymer-Clay nanocomposites : one- and two-step approaches [Paper]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. External link

Pahlavanpour, M., Moussaddy, H., Ghossein, E., Hubert, P., & Lévesque, M. (2013). Prediction of elastic properties in polymer-clay nanocomposites: Analytical homogenization methods and 3D finite element modeling. Computational Materials Science, 79, 206-215. External link

Pasquier, P., Marcotte, D., Bernier, M., & Kummert, M. (2013, August). Simulation of ground-coupled heat pump systems using a spectral approach [Paper]. BS 2013. 13th Conference of International Building Performance Simulation Association, Chambéry, France. External link

Pea, R., Aubin, C.-É., Clin, J., Cobetto, N., & Sanders, J. (2013, October). Analyse biomécanique 3D de modes de traitement non chirurgicaux pour les scoliosis infantiles [Paper]. 43e Réunion annuelle de la Société de la scoliose du Québec, Montréal, Québec. Unavailable

Pehlivanov, I., Roy-Beaudry, M., Mac-Thiong, J. M., Bellefleur, C., Aubin, C.-É., Labelle, H., & Parent, S. (2013, May). Étude radiologique pour comparer les paramètres 3D entre les patients avec et sans scoliose [Paper]. 33e journée de la recherche du POES et de la division d'orthopédie de l'Université de Montréal, Montréal, Québec. Unavailable

Pelletier, D. (2013, February). Verification of high-order time-integrators for flows on deforming domains [Paper]. 17th International Conference on Finite Elements in Flow Problems (FEF 2013, San Diego, California, USA. Unavailable

Périé-Curnier, D., Dahdah, N., Foudis, A., & Curnier, D. (2013). Multi-parametric MRI as an indirect evaluation tool of the mechanical properties of in-vitro cardiac tissues. BMC Cardiovascular Disorders, 13. Available

Périé-Curnier, D., Dahdah, N., Foudis, A., & Curnier, D. (2013). Multi-Parametric MRI as an Indirect Evaluation Tool of the Mechanical Properties of in-Vitro Cardiac Tissues. BMC Cardiovascular Disorders, 13. External link

Picard, M., Turenne, S., Vasilevskiy, D., & Masut, R. A. (2012, July). Numerical simulation of performance and thermomechanical behavior of thermoelectric modules with segmented bismuth-telluride-based legs [Paper]. ICT/ECT Joint Conference 2012, Aalborg, Denmark. Published in Journal of Electronic Materials, 42(7). External link

Prieur, A. (2013). Utilisation du potentiel de stockage thermique des chauffe-eau électriques pour combler une production variable d'énergie renouvelable [Master's thesis, École Polytechnique de Montréal]. Available

Pupin, C., Loiselle-Shebib, V., Ruiz, E., Ross, A., Dauchier, M., Dambrine, B., & Godon, T. (2013, July). Formation of porosities in RTM by VOCS and water vapour [Paper]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. External link

Q

Quintana, H. (2013). A Practical Approach to Model Predictive Control (MPC)for Solar Communities [Master's thesis, École Polytechnique de Montréal]. Available

Quintana, H., & Kummert, M. (2013, August). Potential of model predictive control (MPC) strategies for the operation of solar communities [Paper]. BS 2013. 13th Conference of International Building Performance Simulation Association, Chambéry, France. External link

R

Rahman, M., Laurent, S., Tawil, N., Yahia, L., & Mahmoudi, M. (2013). Analytical Methods for Corona Evaluations. In Protein-nanoparticles interactions (65-82). External link

Rahman, M., Laurent, S., Tawil, N., Yahia, L., & Morteza, M. (2013). Protein-nanoparticle interactions : the bio-nano interface. External link

Rahmani, B., Ghossein, E., Villemure, I., & Lévesque, M. (2013, September). Mechanical Properties Identification of Particulate Composites Constitutive Materials using Virtual Fields Method [Paper]. 28th Annual Technical Conference of the American Society for Composites (ASC 2013), State College, PA, United states. External link

Rahmani, B., Mortazavi, F., Villemure, I., & Lévesque, M. (2013). A new approach to inverse identification of mechanical properties of composite materials: Regularized model updating. Composite Structures, 105, 1160-125. External link

Rahmani, B., Villemure, I., & Lévesque, M. (2013, May). A new regularized model updating approach for accurate mechancal properties identification of composite materials [Paper]. Photomechanics, Montpellier, France. Unavailable

Rahmani, B., Villemure, I., & Lévesque, M. (2013, July). A new regularized virtual fields method for composite material parameters identification [Paper]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. External link

Ramzi, R., & Lakis, A. A. (2013). Effect of geometric and fluid flow nonlinearities on cylindrical shells subjected to a supersonic flow. International Journal of Numerical Methods and Applications, 9(1), 1-37. External link

Ramzi, R., & Lakis, A. A. (2013). Effect of geometric nonlinearities on nonlinear vibrations of closed cylindrical shells. International Journal of Structural Stability and Dynamics, 13(4). External link

Rasoulimir, M. (2013). Metrology Frame for Robotic Machining of Pockets in Large Flexible Panels [Master's thesis, École Polytechnique de Montréal]. Available

Ravey, C., Lebel, F., Ruiz, E., Courteau-Godmaire, H., & Trochu, F. (2013, July). Void minimization and optimization of injection velocity in RTM processing [Paper]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. External link

Ravey, C., Ruiz, E., & Trochu, F. (2013, July). Determination of the optimal injection velocity in resin transfer molding by infrared thermography [Paper]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. External link

Ren, Q., Balazinski, M., Jemielniak, K., Baron, L., & Achiche, S. (2013). Experimental and fuzzy modelling analysis on dynamic cutting force in micro milling. Soft Computing, 17(9), 1687-1697. External link

Ren, Q., Baron, L., Balazinski, M., & Jemielniak, K. (2013). Fuzzy cutting force modelling in micro-milling. Journal of Intelligent and Fuzzy Systems, 25(4), 1027-1035. External link

Renaud, J., Causse, P., Ruiz, E., & Trochu, F. (2013, July). A study of consolidation equilibrium in composites made by flexible injection [Paper]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. External link

Rigaud, M. (2013). Fire: a Hot Idea for International Refractory Education and Research. American Ceramic Society Bulletin, 92(7), 36-37. External link

Rigaud, M. (2013, October). On refractory education : moving ahead with FIRE [Paper]. Ralph Lloyd Harris Memorial Symposium 51st Conference of the Metallurgical Society of Canada (CIM), Met Soc 2013, Montréal, Québec. Unavailable

Robert, É., & Monkewitz, P. A. (2013). Experimental realization and characterization of unstretched planar one-dimensional diffusion flames. Combustion and Flame, 160(3), 546-556. External link

Robert, É., Jajarmi, R. I., Pettersson, J., & Engvall, K. (2013, June). Acoustic separation of sub-micron particles in gases [Paper]. 21st International Congress on Acoustics (ICA 2013), Montréal, Québec. Published in Proceedings of Meetings on Acoustics, 19(1). External link

Rodrigo, F., Mbeh, D. A., Samani, T. D., Le Tien, C., Mateescu, M. A., Yahia, L., & Sacher, E. (2013). The effect of ethylene oxide sterilization on the surface chemistry and in-vitro biocompability of several kinds of chitosan. Journal of Biomedical Materials Research: Part B, Applied Biomaterials, 101(B), 1444-1455. External link

Rostamzadeh, R., Sabaghi, M., & Esmaili, A. (2013). Evaluation of cost-effectiveness criteria in supply chain management : case study. Advances in Decision Sciences, 2013. Available

S

Sainte-Beuve, D., Mascle, C., & Baptiste, P. (2013, June). Évaluation de différentes stratégies de démantèlement de la carcasse d'un avion [Paper]. 10e Congrès international de génie industriel (CIGI 2013), La Rochelle, France. Unavailable

Sattout, A., Labelle, H., & Aubin, C.-É. (2013, May). Étude biomécanique du corset nocturne de Providence pour le traitement de la scoliose idiopathique adolescente [Paper]. 33e journée de la recherche du POES et de la division d'orthopédie de l'Université de Montréal, Montréal, Québec. Unavailable

Schlechtingen, M., Santos, I. F., & Achiche, S. (2013). Using data-mining approaches for wind turbine power curve monitoring: A comparative study. IEEE Transactions on Sustainable Energy, 4(3), 671-679. External link

Schlechtingen, M., Santos, I. F., & Achiche, S. (2013). Wind turbine condition monitoring based on SCADA data - Part 1, System description. Applied Soft Computing, 13(1), 259-270. External link

Schmidt, H., Bashkuev, M., Dreischarf, M., Rohlmann, A., Duda, G., Wilke, H.-J., & Shirazi-Adl, A. (2013). Computational biomechanics of a lumbar motion segment in pure and combined shear loads. Journal of Biomechanics, 46(14), 2513-2521. External link

Schmidt, H., Galbusera, F., Rohlmann, A., & Shirazi-Adl, A. (2013). What have we learned from finite element model studies of lumbar intervertebral discs in the past four decades? Journal of Biomechanics, 46(14), 2342-2355. External link

Séoud, L., Dansereau, J., Labelle, H., & Cheriet, F. (2013). Noninvasive Clinical Assessment of Trunk Deformities Associated With Scoliosis. IEEE Journal of Biomedical and Health Informatics, 17(2), 392-401. External link

Shahvarpour, A., Shirazi-Adl, A., Bazrgari, B., & Larivière, C. (2013, September). Prediction of trunk neuromuscular response under perturbations [Paper]. 37th Annual Meeting of the American Society of Biomechanics (ABS 2013, Omaha, NE, USA. Unavailable

Shahvarpour, A., Shirazi-Adl, A., Larivière, C., & Mecheri, H. (2013, September). Effect of forward perturbation on the trunk neuromuscularr behavior [Paper]. 37th Annual Meeting of the American Society of Biomechanics (ABS 2013, Omaha, NE, USA. Unavailable

Shebib Loiselle, V. (2013). Fabrication par injection flexible de pièces coniques pour des applications aérospatiales [Master's thesis, École Polytechnique de Montréal]. Available

Sheidaei, A., Baniassadi, M., Banu, M., Askeland, P., Pahlavanpour, M., Kuuttila, N., Pourboghrat, F., Drzal, L. T., & Garmestani, H. (2013). 3-D microstructure reconstruction of polymer nano-composite using FIB-SEM and statistical correlation function. Composites Science and Technology, 80, 47-54. External link

Shen, J., Kadoury, S., Aubin, C.-É., Labelle, H., & Parent, S. (2013, October). Torsion paramétrique chez les patients atteints de scoliose idiopathique : une évaluation des outcomes chirurgicaux [Paper]. 43e Réunion annuelle de la Société de la scoliose du Québec, Montréal, Québec. Unavailable

Shen, J., Kadoury, S., Labelle, H., Roy-Beaudry, M., Aubin, C.-É., & Parent, S. (2013, May). Torsion géométrique en scoliose idiopathique de l'adolescent (SIA) : une nouvelle méthode pour différencier les sous-types Lenkel [Paper]. 33e Journée de la recherche du POES et de la Division d'orthopédie de l'Université de Montréal, Montréal, Québec. Unavailable

Shen, J., Kadoury, S., Roy-Beaudry, M., Labelle, H., Aubin, C.-É., & Parent, S. (2013, July). Geometric torsion in AIS : a new method to differentiate between Lenke 1 su-types [Paper]. 20th International Meeting on Advanced Spine Techniques (IMAST 2013), Vancouver, British Columbia. External link

Shirazi, A. S., & Bernier, M. (2013). Thermal capacity effects in borehole ground heat exchangers. Energy and Buildings, 67, 352-364. External link

Sim, W. G., & Mureithi, N. W. (2013). Drag coefficient and two-phase friction multiplier on tube bundles subjected to two-phase cross-flow. Journal of Pressure Vessel Technology, 135(1). External link

Slamani, M., Mayer, J. R. R., & Balazinski, M. (2013). Concept for the integration of geometric and servo dynamic errors for predicting volumetric errors in five-axis high-speed machine tools: an application on a XYC three-axis motion trajectory using programmed end point constraint measurements. International Journal of Advanced Manufacturing Technology, 65(9-12), 1669-1679. External link

Sok, M. C. (2013). Mesure sans contact d'un panneau d'aile d'avion et analyse numérique pour contrôle dimensionnel [Master's thesis, École Polytechnique de Montréal]. Available

Sommier, E. (2013). Optimisation du procédé de fabrication d'isolateurs vibratoires en polychloroprène [Master's thesis, École Polytechnique de Montréal]. Available

Spooner, D., & Vadean, A. (2013, May). L'enseignement du design transdisciplinaire de produits et de procédés [Paper]. Journée MATI, Montréal, Québec. Unavailable

Stattout, A., Clin, J., Cobetto, N., Labelle, H., & Aubin, C.-É. (2013, October). Analyse biomécanique des corsets de providence pour le traitement de la scoliose idiopathique adolescente [Paper]. 43e Réunion annuelle de la Société de la scoliose du Québec, Montréal, Québec. Unavailable

T

Tan, S., Zeng, Y., Huet, G., & Fortin, C. (2013, August). Effective Reverse Engineering of Qualitative Design Knowledge: A Case Study of Aerospace Pylon Design [Paper]. ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (DETC 2013), Portland, Oregon, USA (12 pages). External link

Tixier, E., Béguin, C., Étienne, S., Pelletier, D., Hay, A., & Ricciardi, G. (2013, June). Fluidelastic instability of tube array in two-phase cross-flow : a porous media approach [Paper]. Annual Meeting of the Canadian Applied and Industrial Mathematics Society (CAIMS), Québec, Québec. Unavailable

Trudel, A. (2013). Étude expérimentale de la propagation de fissures de fatigue dans la zone affectée thermiquement de joints soudés de roues de turbines hydrauliques [Master's thesis, École Polytechnique de Montréal]. Available

Trudel, A., Lévesque, M., & Brochu, M. (2013, June). Residual stress effects on the propagation of fatigue cracks in the weld of a CA6NM stainless steel [Paper]. 13th International Conference on Fracture, Beijing, China (10 pages). Unavailable

V

Vermette, Y. (2013). Étude d'un nouveau manipulateur parallèle ayant une plateforme articulée et un engrenage planétaire [Master's thesis, École Polytechnique de Montréal]. Available

Vernet, N. (2013). Étude des propriétés de mise en oeuvre de renforts fibreux interlock tridimensionnels [Ph.D. thesis, École Polytechnique de Montréal]. Available

Vernet, N., & Trochu, F. (2013, July). Analysis and modeling of 3D interlock fabric compaction behavior [Paper]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. External link

Vernet, N., & Trochu, F. (2013, July). Permeability analytical modeling of 3D interlock fabrics [Paper]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. External link

Verstraete, A. (2013). Étude d'une communauté solaire avec stockage thermique saisonnier par puits géothermiques [Master's thesis, École Polytechnique de Montréal]. Available

Verstraete, A., & Bernier, M. (2013, June). Étude d'une communauté solaire utilisant un réseau de distribution èa un seul tuyau [Paper]. XIème Colloque Inter-universitaire Franco-Québécois sur la thermique des systèmes (CIFQ 2013), Reims, France. Unavailable

Villalpando, F. (2013). Simulation numérique de l'accrétion de glace sur une pale d'éolienne [Ph.D. thesis, École Polytechnique de Montréal]. Available

X

Xu, B., Xie, W.-, Viens, M., Mohseni E., E., Birglen, L., & Mantegh, I. (2013, October). Intelligent Eddy curent crack detection system design based on neuro-fuzzy logic [Paper]. International Workshop on Smart Materials and Smart Structures, Calgary, Alberta, Caada. Unavailable

Y

Yu, R., Hay, A., Pelletier, D., Corbeil, S. , S., G., & Étienne, S. (2013, June). Two degrees of freedom vortex-induced vibration responses with zero mass and damping at low reynolds number [Paper]. ASME 2013 32nd International Conference on Ocean, Offshore and Arctic Engineering, Nantes, France. External link

List generated on: Thu Sep 21 08:20:29 2023 EDT