Monter d'un niveau |
Abbasi, S., Carreau, P., & Derdouri, A. (2010). Flow induced orientation of multiwalled carbon nanotubes in polycarbonate nanocomposites: Rheology, conductivity and mechanical properties. Polymer, 51(4), 922-935. Lien externe
Achim, V., & Ruiz, E. (2010). Guiding selection for reduced process development time in RTM. International Journal of Material Forming, 3(2), 1277-1286. Lien externe
Akrout, K., & Baron, L. (juillet 2010). Positio: A 4R serial manipulator having a surface of isotropic positioning [Communication écrite]. 18th CISM-IFToMM Symposium on Theory and Practice of Robots and Manipulators, Udine, Italy. Lien externe
Aliyu, M. D. S., & Boukas, E.-K. (2010). 2-Dof discrete-time nonlinear H-Infinity-filters. International Journal of Robust and Nonlinear Control, 20(7), 818-833. Lien externe
Aliyu, M. D. S., & Luttamaguzi, J. (2010). 3-D of-PID nonlinear H-Infinity estimators. International Journal of Control, 83(6), 1136-1144. Lien externe
Aliyu, M. D. S., Boukas, E.-K., & Chinniah, Y. A. (2010). Discrete-time PI-nonlinear H estimation. IEEE Transactions on Automatic Control, 55(3), 784-790. Lien externe
Allard, Y., Kummert, M., & Bernier, M. (septembre 2010). Using performance simulation in the commissioning and monitoring of a net-zero energy home [Communication écrite]. Eurosun 2010, Graz, Austria. Lien externe
Alloui, I., Benmoussa, H., & Vasseur, P. (2010). Soret and thermosolutal effects on natural convection in a shallow cavity filled with a binary mixture. International Journal of Heat and Fluid Flow, 31(2), 191-200. Lien externe
Alloui, I., Benmoussa, H., & Vasseur, P. (novembre 2009). Thermosolutal Convection in a Shallow Layer of a Binary Fluid [Communication écrite]. 2nd International Symposium on Computational Mechanics and the 12th International Conference on the Enhancement and Promotion of Computational Methods in Engineering and Science, Hong Kong et Macao. Lien externe
Alloui, Z., & Vasseur, P. (2010). Convection in Superposed Fluid and Porous Layers. Acta Mechanica, 214(3-4), 245-260. Lien externe
Alloui, Z., & Vasseur, P. (2010). Natural convection in a shallow cavity filled with a micropolar fluid. International Journal of Heat and Mass Transfer, 53(13-14), 2750-2759. Lien externe
Alloui, Z., Merabtine, A., & Vasseur, P. (2010). Soret and Thermosolutal Effects on Natural Convection in a Vertical Cavity Filled With a Binary Mixture. Canadian Journal of Chemical Engineering, 88(5), 718-727. Lien externe
Alloui, Z., Robillard, L., & Vasseur, P. (2010). Density Maximum Effect on Soret-Induced Natural Convection in a Square Porous Cavity. Fluid Dynamics Research, 42(5). Lien externe
Alloui, Z., Vasseur, P., Robillard, L., & Bahloul, A. (2010). Onset of double-diffusive convection in a horizontal Brinkman cavity. Chemical Engineering Communications, 197(3), 387-399. Lien externe
Amini, S., Mortazavi, F., Sun, J., Hoemann, C. D., & Villemure, I. (octobre 2010). Growth plate zonal mechanical behavior is non-homogeneous according to the biochemical composition [Communication écrite]. 40e réunion annuelle de la Société de Scoliose du Québec, Burlington, VT. Non disponible
Amini, S., Veilleux, D., & Villemure, I. (2010). Tissue and cellular morphological changes in growth plate explants under compression. Journal of Biomechanics, 43(13), 2582-2588. Lien externe
Amini, S., Veilleux, D., Sun, J., Hoemann, C. D., & Villemure, I. (juillet 2010). Relationship between compression loading and biochemical composition of swine growth plates [Communication écrite]. International Research Society of Spinal Deformities Meeting, Montréal, Québec. Non disponible
Anahory, Y., Guihard, M., Smeets, D., Karmouch, R., Schiettekatte, F., Vasseur, P., Desjardins, P., Hu, L. A., Allen, L. H., Leon-Gutierrez, E., & Rodriguez-Viejo, J. (2010). Fabrication, Characterization and Modeling of Single-Crystal Thin Film Calorimeter Sensors. Thermochimica Acta, 510(1-2), 126-136. Lien externe
Arbter, A., Beraud, J. M., Binetry, C., Bizet, L., Bréard, J., Comas-Cardona, S., Demaria, C., Endruweit, A., Ermanni, P., Gommer, F., Hasanovic, S., Henrat, P., Klunker, F., Laine, B., Lavanchy, S., Lomov, S. V., Long, A., Michaud, V., Morren, G., ... Ziegmann, G. (juillet 2010). Experimental determination of the permeability of textiles : a benchmark exercises [Communication écrite]. 10th International Conference on Flow Processes in Composite Materials, Monte Verità, Ascona, Switzerland. Lien externe
Arjmand, N., Gagnon, D., Plamondon, A., Shirazi-Adl, A., & Larivière, C. (2010). A comparative study of two trunk biomechanical models under symmetric and asymmetric loadings. Journal of Biomechanics, 43(3), 485-491. Lien externe
Arjmand, N., Gagnon, D., Plamondon, A., Shirazi-Adl, A., & Larivière, C. (février 2010). Comparison of two trunk biomechanical models in lifting : evaluation of assumptions [Communication écrite]. 9th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Valencia, Spain. Non disponible
Arjmand, N., Gagnon, D., Plamondon, A., Shirazi-Adl, A., & Larivière, C. (février 2010). Trunk muscle forces and spinal loads in static lifting - comparison of two models [Communication écrite]. 9th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Valencia, Spain. Non disponible
Arjmand, N., Gagnon, D., Plamondon, A., Shirazi-Adl, A., & Larivière, C. (mars 2010). Two trunk biomechanical models estimate quite different muscle forces and spinal loads [Communication écrite]. 56th annual meeting of Orthopaedic Research Society, New Orleans, Louisiana. Lien externe
Arroyo, O. H., Huneault, M. A., Favis, B. D., & Bureau, M. (2010). Processing and properties of PLA/Thermoplastic starch/Montmorillonite nanocomposites. Polymer Composites, 31(1), 114-127. Lien externe
Aubin, C.-É., Sevrain, A., & Labelle, H. (juillet 2010). Biomechanical analysis of risk progression in spondylolisthesis [Communication écrite]. 17th International Meeting on Advanced Spine Techniques, Toronto, Canada. Lien externe
Bahloul, A., Roberge, B., Goyer, N., Chavez, M., & Reggio, M. (2010). La prévention des intoxications dans les silos à fourrage. (Rapport technique n° R-672). Lien externe
Beaudette, K., Boudoux, C., Driscoll, M., Strupler, M., Carion, L., Maciejko, R., & Aubin, C.-É. (juillet 2010). An handheld probe based on optical coherence tomography for minimally invasive spine surgeries : a Feasibility study [Communication écrite]. International Research Society of Spinal Deformities Meeting, Montréal, Québec. Non disponible
Beaudette, K., Driscoll, M., Strupler, M., Carrion, L., Maciejko, R., Boudoux, C., & Aubin, C.-É. (octobre 2010). An OCT handheld probe for minimally invasive spine surgeries [Communication écrite]. 40e réunion annuelle de la Société de Scoliose du Québec, Burlington, VT.. Non disponible
Beaudette, K., Strupler, M., Driscoll, M., Maciejko, R., Aubin, C.-É., & Boudoux, C. (septembre 2010). Towards a handheld probe based on optical coherence tomography forminimally invasive spine surgeries [Communication écrite]. 8th Biennial Meeting of the International Research Society of Spinal Deformities (IRSSD 2010), Montréal, Québec. Lien externe
Beaudry, C., Boyer, P., Camarero, R., Chaouki, J., Comeau, Y., Dansereau, J., Desjardins, P., Dupuis, C., Hurteau, R., Nicolas, J., & Pierre, S. (2010). Vers la création d'un microprogramme de 3e cycle visant l'enrichissement des habiletés des doctorats. (Rapport technique). Non disponible
Becker, M., Spooner, D., Huet, G., Sanschagrin, B., Vadean, A., & Camarero, R. (juin 2010). The designer's logbook: a best practice for engineering students, an insightful assessment medium for educators [Communication écrite]. 6th International CDIO Conference, Making Change Last : Sustaining and globalizing Engineering Educational Reform, Montréal, Québec. Non disponible
Béguin, C. (2010). Modélisation des écoulements diphasiques : amortissement, forces interfaciales et turbulence diphasique. [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Béguin, C., Wehbe, J., Ross, A., Pettigrew, M. J., & Mureithi, N. W. (juillet 2009). Influence of viscosity, density and surface tension on two-phase damping [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2009), Prague, Czech republic. Lien externe
Bejjani, R., Balazinski, M., Shi, B., & Attia, H. (mai 2010). A new design of quick stop device for research on chip formation [Communication écrite]. 38th Annual North American Manufacturing Research Conference (NAMRC 2010), Kingston, ON, Canada. Non disponible
Bélanger, S. (2010). Adaptation de maillages anisotropes [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Bélanger, S., Vétel, J., Garon, A., & Pelletier, D. (juin 2010). Grid adapted time-dependent lagrangian coherent structures identification [Communication écrite]. 4th European Conference on Computational Mechanics, Solids, Structures, and Coupled Problems in Engineering, Paris, France. Non disponible
Belhumeur, P., Julien, K., Tabrizian, M., Yahia, L., & Marchand, R. (2010). Biological indicators for validating a prion sterilization-process. (Brevet no US7851178). Lien externe
Bensadoun, F., Kchit, N., Ruiz, E., & Trochu, F. (juillet 2010). Fabrication and mechanical properties of nanocomposites fabricated by rein infusion with bioresin and natural fibers [Communication écrite]. 8th Joint Canada-Japan Workshop on Composites, Montréal, Québec. Non disponible
Bianco, R., Wagnac, E., Arnoux, P. J., Mac-Thiong, J. M., & Aubin, C.-É. (octobre 2010). Biomechanical comparison of the pull-out forces of different pedicle screw designs and insertion techniques using finite element analysis [Communication écrite]. 40e réunion annuelle de la Société de Scoliose du Québec, Burlington, VT.. Non disponible
Birglen, L. (2010). From flapping wings to underactuated fingers and beyond: a broad look to self-adaptive mechanisms. Mechanical Sciences, 1(1), 5-12. Disponible
Birglen, L. (août 2010). The kinematic preshaping of triggered self-adaptive linkage-driven robotic fingers [Communication écrite]. ASME/IFToMM International Workshop on Underactuated Grasping, Montréal, Québec. Non disponible
Birglen, L., & Herbecq, F. (août 2009). Self-adaptive compliant grippers capable of pinch preshaping [Communication écrite]. ASME International Design Engineering Technical Conferences and Computers and Information In Engineering Conference (DETC 2009), San Diego, CA. Lien externe
Boesch, G., Vo, H. D., Savard, B., Wanko-Tchatchouang, C., & Mureithi, N. W. (2010). Flight Control Using Wing-Tip Plasma Actuation. Journal of Aircraft, 47(6), 1836-1846. Lien externe
Bouderlique, R. (2010). Modélisation numérique et algébrique des joints labyrinthe des turbines Francis [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Bougherara, H., Bureau, M., & Yahia, L. (2010). Bone remodeling in a new biomimetic polymer-composite hip stem. Journal of Biomedical Materials Research. Part A, 92(1), 164-174. Lien externe
Bougherara, H., Klika, V., Maršík, F., Mařík, I. A., & Yahia, L. (2010). New predictive model for monitoring bone remodeling. Journal of Biomedical Materials Research. Part A, 95(1), 9-24. Lien externe
Boukas, E.-K. (2010). Optimal guaranteed cost for singular linear systems with random abrupt changes. Optimal Control Applications and Methods, 31(4), 335-349. Lien externe
Boukas, E.-K. (2010). Stability and stabilizability of discrete-time systems with unknown transition probabilities. International Journal of Innovative Computing, Information and Control, 6(5), 1991-1998. Lien externe
Boukas, E.-K., & M'Sirdi, N. K. (2010). Stabilization of stochastic systems with partially known transition jumps rates. International Journal of Innovative Computing, Information and Control, 6(3), 1199-1206. Lien externe
Bres, A., Monsarrat, B., Dubourg, L., Birglen, L., Perron, C., Jahazi, M., & Baron, L. (2010). Simulation of friction stir welding using industrial robots. Industrial Robot, 37(1), 36-50. Lien externe
Brochu, M. (2010). Comportement en fatigue de l'aluminium 357 coulé par gravité et rhéocoulé. [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Brochu, M., Verreman, Y., Ajersch, F., & Bouchard, D. (2010). High cycle fatigue strength of permanent mold and rheocast aluminum 357 alloy. International Journal of Fatigue, 32(8), 1233-1242. Lien externe
Brochu, M., Verreman, Y., Ajersch, F., & Bouchard, D. (janvier 2009). Résistance en fatigue de l'alliage A357 moulé en coquille et rhéomoulé [Communication écrite]. Journée du REGAL 2009. Non disponible
Causse, P., Ruiz, E., & Trochu, F. (juillet 2010). Experimental analysis of flexible injection for curved composite parts [Communication écrite]. 10th International Conference on Flow Processes in Composite Materials, Monte Verità, Ascona, Switzerland. Lien externe
Causse, P., Ruiz, E., & Trochu, F. (juillet 2010). Thermoelastic spring-in of curved composite parts manufactured by flexible injection [Communication écrite]. 8th Joint Canada-Japan Workshop on Composites, Montréal, Québec. Non disponible
Chagnon, A., Aubin, C.-É., & Villemure, I. (2010). Biomechanical Influence of Disk Properties on the Load Transfer of Healthy and Degenerated Disks Using a Poroelastic Finite Element Model. Journal of Biomechanical Engineering, 132(11), 111006-111006. Lien externe
Chamberland-Lauzon, J. (2010). Modélisation et optimisation d'isolateurs non-linéaires en élastomères [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Chevrefils, C., Duong, L., Cheriet, F., Parent, S., & Aubin, C.-É. (juillet 2010). 2D/3D registration of pre-operative MRI models with a single radiographic image : feasibility study [Communication écrite]. International Research Society of Spinal Deformities Meeting, Montréal, Québec. Non disponible
Clin, J., Aubin, C.-É., Labelle, H., & Parent, S. (juillet 2010). Immediate correction in brace treatment: how much is needed to obtain a long-term effectiveness? [Communication écrite]. International Research Society of Spinal Deformities Meeting, Montréal, Québec. Non disponible
Clin, J., Aubin, C.-É., Parent, S., & Labelle, H. (2010). A Biomechanical Study of the Charleston Brace for the Treatment of Scoliosis. Spine, 35(19), E940-E947. Lien externe
Clin, J., Aubin, C.-É., Parent, S., & Labelle, H. (octobre 2010). Virtual prototyping of braces for the treatment of scoliosis [Communication écrite]. 40e réunion annuelle de la Société de Scoliose du Québec, Burlington, VT.. Non disponible
Clin, J., Aubin, C.-É., Parent, S., Sangole, A. P., & Labelle, H. (2010). Comparison of the Biomechanical 3d Efficiency of Different Brace Designs for the Treatment of Scoliosis Using a Finite Element Model. European Spine Journal, 19(7), 1169-1178. Lien externe
Clin, J., Aubin, C.-É., Sangole, A. P., Labelle, H., & Parent, S. (2010). Correlation Between Immediate in-Brace Correction and Biomechanical Effectiveness of Brace Treatment in Adolescent Idiopathic Scoliosis. Spine, 35(18), 1706-1713. Lien externe
Cloutier, F. (2010). Analyse des conditions de fabrication en pression et température dans les procédés d'injection par transfert de résine. [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Cloutier, G., Sellens, R. W., Hugo, R. J., Camarero, R., & Fortin, C. (juin 2010). Outcomes Assessment and Curriculum Improvement Through the Cyclical Review of Results - A Model to Satisfy CEAB-2009 Accreditation Requirements [Communication écrite]. Canadian Engineering Education Association (CEEA) Conference, 2010, Queen's University Kingston, Ontario (6 pages). Publié dans Proceedings of the Canadian Engineering Education Association (CEEA). Disponible
Cori, J.-F., Étienne, S., Pelletier, D., & Garon, A. (janvier 2010). Implicit Runge-Kutta time integrators for Fluid-Structure Interactions [Communication écrite]. 48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, Orlando, FL, United states. Lien externe
Crochon, T., Li, C., & Lévesque, M. (septembre 2010). Finite-element implementation of constitutive theories [Communication écrite]. Mechanics of Time-Dependent Materials Conference (MTDM 2008), Portorož, Slovenia. Non disponible
Crochon, T., Schonherr, T., Li, C., & Lévesque, M. (2010). On finite-element implementation strategies of Schapery-type constitutive theories. Mechanics of Time-Dependent Materials, 14(4), 359-387. Lien externe
Dalir, H., Farahani, R. D., Lévesque, M., & Therriault, D. (novembre 2010). UV-assisted direct-write assembly of scaffold-templated nanoclay composites via bioting-streptavidin interactions [Communication écrite]. ASME International Mechanical Engineering Congress and Exposition (IMECE 2010), Vancouver, Canada. Lien externe
De Nardo, L., Moscatelli, M., Silvi, F., Tanzi, M. C., Yahia, L., & Fare, S. (2010). Chemico-physical modifications induced by plasma and ozone sterilizations on shape memory polyurethane foams. Journal of Materials Science: Materials in Medicine, 21(7), 2067-2078. Lien externe
Delfour, M. C., & Garon, A. (2010). New Equations for the Dose Under Pulsative/Periodic Conditions in the Design of Coated Stents. Computer Methods in Biomechanics and Biomedical Engineering, 13(1), 19-34. Lien externe
Demaria, C., Ruiz, E., Trochu, F., Dambrine, B., & Godon, T. (mai 2010). Fabrication by resin transfer molding of a turbine blade reinforced by three-dimensional woven fabrics : Process simulation and optimization [Communication écrite]. Society for the Advancement of Material and Process Engineering's Spring Conference and Exhibition, Seattle, Washington. Non disponible
Deneu, F. (2010). Méthode de sélection environnementale des matériaux pour la fin de vie des produits par évaluation floue. [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Desbiens-Blais, F., Clin, J., Parent, S., Labelle, H., & Aubin, C.-É. (octobre 2010). Optimization procedure for brace design for the treatment of adolescent idiopathic scoliosis [Communication écrite]. 40e réunion annuelle de la Société de Scoliose du Québec, Burlington, VT.. Non disponible
Dolatabadi, F. (2010). Étude de l'influence du mode de lubrification sur les performances d'usinage du composite à matrices d'aluminium. [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Dompierre, F. (2010). Détermination des fréquences naturelles de structures submergées par la méthode d'intéractions fluide-structure bidirectionnelle [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Driscoll, C. R., Aubin, C.-É., Canet, F., Dansereau, J., & Labelle, H. (2010). The Impact of Intra-Operative Sternum Vertical Displacement on the Sagittal Curves of the Spine. European Spine Journal, 19(3), 421-426. Lien externe
Driscoll, C. R., Aubin, C.-É., Dansereau, J., & Labelle, H. (juillet 2010). Optimization of patient positioning for scoliosis surgery on a multi-functional positioning frame [Communication écrite]. International Research Society of Spinal Deformities Meeting, Montréal, Québec. Non disponible
Driscoll, C., Aubin, C.-É., Labelle, H., & Dansereau, J. (septembre 2010). Optimized use of multi-functional positioning frame features forscoliosis surgeries [Communication écrite]. 8th Biennial Meeting of the International Research Society of Spinal Deformities (IRSSD 2010), Montréal, Québec. Lien externe
Driscoll, M., Aubin, C.-É., Moreau, A., & Parent, S. (juillet 2010). Biomechanical analysis of different fusionless growth sparring instrumentation systems for the early treatment of idiopathic scoliosis [Communication écrite]. International Research Society of Spinal Deformities Meeting, Montréal, Québec. Non disponible
Driscoll, M., Aubin, C.-É., Moreau, A., & Parent, S. (juillet 2010). Finite element comparison of different growth sparring instrumentation systems for the early treatment of idiopathic scoliosis [Communication écrite]. 8th Biennial Meeting of the International Research Society of Spinal Deformities (IRSSD 2010), Montréal, Québec. Lien externe
Driscoll, M., Aubin, C.-É., Moreau, A., Wakula, Y., & Parent, S. (octobre 2010). Influence of intravertebral epiphyseal fusionless growth modulation device on spinal alignment in a porcine model [Communication écrite]. 40e réunion annuelle de la Société de Scoliose du Québec, Burlington, VT.. Non disponible
Drolet, M. (2010). Refinement of Non-Synchronous Vibrations Prediction in Axial Compressors [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Erkan, T. (2010). Méthodes de suivi de l'état des machines-outils par palpage d'artefacts. [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Erkan, T., & Mayer, J. R. R. (2010). A cluster analysis applied to volumetric errors of five-axis machine tools obtained by probing an uncalibrated artefact. CIRP Annals - Manufacturing Technology, 59(1), 539-542. Lien externe
Erkan, T., & Mayer, J. R. R. (juillet 2010). Linear axes performance check on a five-Axis machine tool by probing an uncalibrated artefact [Communication écrite]. 36th International MATADOR Conference, Manchester, Lancashire, United kingdom. Lien externe
Erkan, T., & Mayer, J. R. R. (juin 2010). Link error estimation for volumetric distortion error prediction of a five-axis machine by probing and uncalibrated artefact [Communication écrite]. 2nd CIRP International Conference on Process Machine Interactions, Vancouver, Canada. Non disponible
Esmailzadeh, M., & Lakis, A. A. (août 2010). Turbulence-induced vibration analysis of an open curved thin shell [Communication écrite]. 3rd Joint US-European Fluids Engineering Summer Meeting and 8th International Conference on Nanochannels, Microchannels and Minichannels, Montréal, Québec. Lien externe
Étienne, S., & Fontaine, E. (juin 2010). Effect of rotational degree of freedom on Vortex-Induced Vibrations of a circular cylinder in cross-flow [Communication écrite]. 20th International Offshore and Polar Engineering Conference, ISOPE-2010, Beijing, China. Non disponible
Étienne, S., & Pelletier, D. (août 2010). The Low Reynolds Number Limit of Vortex and Wake-Induced Vibrations [Communication écrite]. 3rd ASME Joint US-European Fluids Engineering Summer Meeting collocated with 8th International Conference on Nanochannels, Microchannels, and Minichannels (FEDSM-ICNMM 2010), Montreal, Quebec, Canada. Lien externe
Étienne, S., Garon, A., Pelletier, D., & Cameron, C. (janvier 2010). Philiadium gregarium versus Aurelia aurita: On propulsion of jellyfish [Communication écrite]. 48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, Orlando, FL, United states. Lien externe
Farahani, R. D., Dalir, H., Lévesque, M., & Therriault, D. (novembre 2010). Carbon nanotube spatial orientation in nanocomposite microstructures by high shear flow [Présentation]. Dans ASME International Mechanical Engineering Congress and Exposition (IMECE 2010), Vancouver, British Columbia. Non disponible
Farahani, R., Dalir, H., Lévesque, M., & Therriault, D. (novembre 2010). Mechanical properties of three-dimensional microstructures infiltrated by carbon nanotube/epoxy nanocomposite under shear flow [Communication écrite]. ASME International Mechanical Engineering Congress and Exposition (IMECE 2010), Vancouver, Canada. Lien externe
Farinas, M.-I., Bélanger, S., Miron, P., Dufour, A.-M., Garon, A., Pelletier, D., & Delfour, M. (juin 2010). Grid independent hemolysis computation: contribution to the FDA critical path initiative for standardization of CFD techniques [Communication écrite]. 4th European Conference on Computational Mechanics, Solids, Structures, and Coupled Problems in Engineering, Paris, France. Non disponible
Fayant, P. (2010). Modélisation par éléments finis de la croissance du tube pollinique. [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Fayant, P., Girlanda, O., Chebli, Y., Aubin, C.-É., Villemure, I., & Geitmann, A. (2010). Finite Element Model of Polar Growth in Pollen Tubes. Plant Cell, 22(8), 2579-2593. Lien externe
Fortin, C., Feldman, D. E., Cheriet, F., & Labelle, H. (2010). Validity of a Quantitative Clinical Measurement Tool of Trunk Posture in Idiopathic Scoliosis. Spine, 35(19), E988-E994. Lien externe
Francucci, G., Vazquez, A., Rodriguez, E., & Ruiz, E. (juillet 2010). Capillarity effect in vacuum assisted resin transfer molding with natural fibers [Communication écrite]. 10th International Conference on Flow Processes in Composite Materials, Monte Verità, Ascona, Switzerland. Lien externe
Gagnon, D., Arjmand, N., Plamondon, A., Shirazi-Adl, A., & Larivière, C. (juin 2010). A comparison between single- and multi-joint EMG-assisted by optimization lumbar spine models [Communication écrite]. XVIII Congress of the International Society of Electrophysiology and Kinesiology, Aalborg, Denmark. Non disponible
Galvan, S., Reggio, M., & Guibault, F. (2010). Inlet velocity profile optimization of the turbine 99 draft tube. Lien externe
Gammacurta, E., Étienne, S., Pelletier, D., & Garon, A. (janvier 2010). Adaptive remeshing for Unsteady RANS Computations [Communication écrite]. 48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, Orlando, FL, United states. Lien externe
Gao, Y., Étienne, S., Yu, D., & Tan, S. K. (juin 2010). Flow characteristics behind two unequal circular cylinders in tandem arrangement [Communication écrite]. 20th International Offshore and Polar Engineering Conference, ISOPE-2010, Beijing, China. Non disponible
García, J. A., Gascón, L., Chinesta, F., Ruiz, E., & Trochu, F. (2010). An efficient solver of the saturation equation in liquid composite molding processes. International Journal of Material Forming, 3(2), 1295-1302. Lien externe
Gariepy, M., Trépanier, J.-Y., & Masson, C. (juin 2010). Improvements in accuracy and efficiency for a far-field drag prediction and decomposition method [Communication écrite]. 28th AIAA Applied Aerodynamics Conference, Chicago, IL, United states. Lien externe
Gascon, L., Garcia, J. A., Chinesta, F., Ruiz, E., & Trochu, F. (juillet 2010). Analysis of the saturation in liquid composite molding processes using an essentially non-oscillatory (eno) technique [Communication écrite]. 10th International Conference on Flow Processes in Composite Materials, Monte Verità, Ascona, Switzerland (5 pages). Lien externe
Gemme, F., Verreman, Y., & Dubourg, L. (janvier 2009). Résistance en fatigue de joints d'aluminium 7075-T6 soudés par frottement-malaxage [Communication écrite]. Journée du REGAL 2009. Non disponible
Gemme, F., Verreman, Y., Dubourg, L., & Jahazi, M. (2010). Numerical analysis of the dwell phase in friction stir welding and comparison with experimental data. Materials Science & Engineering. A, Structural Materials: Properties, Microstructure and Processing, 527(16-17), 4152-4160. Lien externe
Gerbe, O., Raynauld, J., & Camarero, R. (mai 2010). Learning Outcomes in a Model-based Approach to Curriculum Design [Communication écrite]. 5th International Conference on Internet and Web Applications and Services, ICIW 2010, Barcelona, Spain. Lien externe
Gervais, J., Périé-Curnier, D., & Aubin, C.-É. (juillet 2010). Can the MRI signal intensity distribution within the intervertebral disc be used to analyze the disc pathology and servity? [Communication écrite]. International Research Society of Spinal Deformities Meeting, Montréal, Québec. Non disponible
Giguere, J.-S., Ilinca, F., & Pelletier, D. (2010). Finite element and sensitivity analysis of thermally induced flow instabilities. International Journal for Numerical Methods in Fluids, 63(10), 1167-1192. Lien externe
Guiassa, R., & Mayer, J. R. R. (mai 2010). Compensation of compliance errors in machining using process intermittent probing [Communication écrite]. 38th Annual North American Manufacturing Research Conference (NAMRC 2010), Kingston, ON, Canada. Non disponible
Guiet, J., Reggio, M., & Vasseur, P. (mai 2010). Application of the lattice Boltzmann method to calculate the natural convection of nanofluids in a shallow cavity [Communication écrite]. 18th Annual Conference of the CFD Society of Canada, Ontario, Canada. Non disponible
Guiet, J., Vasseur, P., Reggio, M., & Leclaire, S. (mai 2010). Application of the lattice Boltzmann method to calculate the natural convection of nanofluids in shallow cavity [Communication écrite]. CFD Society of Canada 18th Annual Conference, London, Ontario. Non disponible
Hacking, S. A., Pauyo, T., Lim, L., Legoux, J. G., & Bureau, M. (2010). Tissue response to the components of a hydroxyapatite-coated composite femoral implant. Journal of Biomedical Materials Research. Part A, 94(3), 953-960. Lien externe
Hadjizadeh, A., Ajji, A., & Bureau, M. (2010). Preparation and characterization of NaOH treated micro-fibrous polyethylene terephthalate nonwovens for biomedical application. Journal of the Mechanical Behavior of Biomedical Materials, 3(8), 574-583. Lien externe
Harmouche, R., Cheriet, F., Labelle, H., & Dansereau, J. (juin 2010). Articulated Model Registration of MRI/X-Ray Spine Data [Communication écrite]. 7th International Conference Image Analysis and Recognition (ICIAR 2010), Povoa de Varzim, Portugal. Lien externe
Hassani, S., Bielawski, M., Beres, W., Balazinski, M., Martinu, L., & Sapieha, J.-E. (2010). Impact stress absorption and load spreading in multi-layered erosion-resistant coatings. Wear, 268(5-6), 770-776. Lien externe
Hay, A., Borggaard, J., Akhtar, I., & Pelletier, D. (2010). Reduced-order models for parameter dependent geometries based on shape sensitivity analysis. Journal of Computational Physics, 229(4), 1327-1352. Lien externe
Hosseini, S., & Lakis, A. A. (octobre 2010). Application of time-frequency analysis for automatic thickness detection in aluminum structure using pulsed eddy current [Communication écrite]. Annual Seminar of the Canadian Machine Vibration Association, Québec City, Canada. Non disponible
Ilinca, F., & Hétu, J.-F. (2010). Three-dimensional numerical simulation of injection moulding. Dans Numerical simulations: Examples and applications in Computational Fluid Dynamics (p. 173-192). Lien externe
Janzen, V., Han, Y., & Pettigrew, M. J. (juillet 2009). Design specifications to ensure flow-induced vibration and fretting-wear performance in CANDU steam generators and heat exchangers [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2009), Prague, Czech republic. Lien externe
Joly, T. F., Mureithi, N. W., & Pettigrew, M. J. (juillet 2009). The effect of angle of attack on the fluidelastic instability of tube bundle subjected to two-phase cross-flow [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2009), Prague, Czech republic. Lien externe
Julien, B., Ste-Marie, M., Pelletier, R., Lapointe, F., & Turenne, S. (juin 2010). Parametric modeling of MIM as-sintered properties of stainless steel 17-4PH and 316L using a statistical model [Communication écrite]. International Conference on Powder Metallurgy and Particulate Materials (PowderMet 2010), Hollywood, FL, United states. Non disponible
Kasra, M., Bohleber, B., & Shirazi-Adl, A. (mars 2010). Viscoelastic properties of the passive human knee joint in compression : effects of meniscectomy and flexion angle [Communication écrite]. 56th annual meeting of Orthopaedic Research Society, New Orleans, Louisiana. Lien externe
Kchit, N., Bensadoun, F., Billotte, C., Ruiz, E., & Trochu, F. (juillet 2010). Nano-clay composites made by liquid molding [Communication écrite]. 10th International Conference on Flow Processes in Composite Materials, Monte Verità, Ascona, Switzerland. Non disponible
Kchit, N., Bensadoun, F., Carrozani, T., Billotte, C., Ruiz, E., Sol, H., & Trochu, F. (juillet 2010). A study of nano-claycomposites made by liquid composite molding [Communication écrite]. 10th International Conference on Flow Processes in Composite Materials, Monte Verità, Ascona, Switzerland. Lien externe
Kerboua, Y., Lakis, A. A., & Hmila, M. (2010). Vibration analysis of truncated conical shells subjected to flowing fluid. Applied Mathematical Modelling, 34(3), 791-809. Lien externe
Khalvatti, A., Mureithi, N. W., & Pettigrew, M. J. (2010). Effect of preferential flexibility direction on fluidelastic instability of a rotated triangular tube bundle. Journal of Pressure Vessel Technology, 132(4), 041309-041309. Lien externe
Khan, K. A., Barello, R., Muliana, A. H., & Lévesque, M. (juin 2010). Coupled heat conduction and thermal stresses in particulate composites [Communication écrite]. 16th US National Congress on Theoretical and Applied Mechanics, State College, Pennsylvania, USA. Non disponible
Kim, E.-J., Roux, J. J., Bernier, M., & Cauret, O. (novembre 2010). Développement d'un modèle hybride de puits géothermiques verticaux [Communication écrite]. Congrès IBPSA-France, Moret-sur-Loing, France. Non disponible
Kim, E.-J., Roux, J. J., Bernier, M., & Cauret, O. (mai 2010). A new borehole heat exchanger (BHE) model based on state reduction techniques analysis [Communication écrite]. 10th REHVA World Congress- Clima, Antalya, Turkey. Non disponible
Komgom, N. C., Mureithi, N. W., & Lakis, A. A. (2010). Application of pattern analysis to condition monitoring of bearing. (Rapport technique). Non disponible
Komgom, N. C., Mureithi, N. W., & Lakis, A. A. (octobre 2010). High speed bearing fault diagnostic using spectral kurtosis and support vector machine [Communication écrite]. Annual Seminar of the Canadian Machine Virbration Association, Québec City, Canada. Non disponible
Kruzelecky, R., Wong, B., Aissa, B., Haddad, E., Jamroz, W., Cloutis, E., Rosca, I., Hoa, S., Therriault, D., & Ellery, A. (juillet 2010). MoonDust Lunar Dust Simulation and Mitigation [Communication écrite]. 40th International Conference on Environmental Systems, Barcelona, Spain. Lien externe
Kuhn, M., & Napporn, T. (2010). Single-Chamber Solid Oxide Fuel Cell Technology—From Its Origins to Today's State of the Art. Energies, 3(1), 57-134. Disponible
Kuhn, M., Napporn, T. W., Meunier, M., & Therriault, D. (2010). Single-chamber micro solid oxide fuel cells: Study of anode and cathode materials in coplanar electrode design. Solid State Ionics, 181(5-7), 332-337. Lien externe
Kumar, V., Paraschivoiu, M., & Paraschivoiu, I. (2010). Low Reynolds number vertical axis wind turbine for mars. Wind Engineering, 34(4), 461-476. Lien externe
Labelle, H., Aubin, C.-É., Lenke, L., Stokes, I., Parent, S., Newton, P., & Jackson, R. (octobre 2010). Toward the 3D classification of scoliosis : what's new? [Communication écrite]. 40e réunion annuelle de la Société de Scoliose du Québec, Burlington, VT.. Non disponible
Laberge Lebel, L., Aïssa, B., El Khakani, M. A., & Therriault, D. (2010). Preparation and mechanical characterization of laser ablated single-walled carbon-nanotubes/polyurethane nanocomposite microbeams. Composites Science and Technology, 70(3), 518-524. Disponible
Laberge Lebel, L., Aissa, B., El Khakani, M. A., & Therriault, D. (2010). Ultraviolet-assisted direct-write fabrication of carbon nanotube/polymer nanocomposite microcoils. Advanced Materials, 22(5), 592-596. Lien externe
Lalonde, N. M., Aubin, C.-É., Parent, S., Pannetier, R., & Villemure, I. (juillet 2010). Biomechanics of the intra-operative lateral decubitus position for thescoliotic spine: effect of the pelvic obliquity [Communication écrite]. 8th Biennial Meeting of the International Research Society of Spinal Deformities (IRSSD 2010), Montréal, Québec. Lien externe
Lalonde, N. M., Villemure, I., Pannetier, R., Parent, S., & Aubin, C.-É. (2010). Biomechanical modeling of the lateral decubitus posture during corrective scoliosis surgery. Clinical Biomechanics, 25(6), 510-516. Lien externe
Landry, F. (2010). Modeling of the Thermomechanical Behavior of an Epoxy Resin Subjected to Elevated Temperatures and Experimental Verification [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Landry, F., Crochon, T., Li, C., & Lévesque, M. (septembre 2010). Thermomechanical behavior of a polymer resin [Communication écrite]. Mechanics of Time-Dependent Materials Conference (MTDM 2008), Portorož, Slovenia. Non disponible
Langlois, A. (2010). Pompes à chaleur géothermiques utilisant des banques thermiques à matériau à changement de phase [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Langlois, A., Bernier, M., Kummert, M., & Lagacé, J. (janvier 2010). Impact de réservoirs de stockage thermique sur les systèmes géothermiques [Communication écrite]. Congrès IBPSA-Canada, Winnipeg, Canada. Lien externe
Larouche, L.-A., & Birglen, L. (août 2010). Design and first experiments with a new underactuated finger [Communication écrite]. ASME/IFToMM International Workshop on Underactuated Grasping, Montréal, Québec. Non disponible
Latremouille-Viau, J., Baptiste, P., & Mascle, C. (2010). Airframe dismantling optimization for aerospace aluminum valorization. Dans Frontiers of Assembly and Manufacturing: Selected papers from ISAM 2009 (p. 157-169). Lien externe
Lebel, F., Ruiz, E., Dulong, S., & Trochu, F. (juillet 2010). Characterization of capillary effects in dual-scale fibrous reinforcements [Communication écrite]. 10th International Conference on Flow Processes in Composite Materials, Monte Verità, Ascona, Switzerland. Non disponible
Lebel, F., Ruiz, E., Dulong, S., & Trochu, F. (juillet 2010). Development of a capillary characterization setup for dual-scale analysis of fiber wetting [Communication écrite]. 8th Joint Canada-Japan Workshop on Composites, Montréal, Québec. Non disponible
Leclaire, S., Reggio, M., & Trépanier, J.-Y. (mai 2010). Integration of a recoloring algorithm into a Rothman-Keller lattice Boltzmann model [Communication écrite]. 18th Annual Conference of the CFD Society of Canada, Ontario, Canada. Non disponible
Lévesque, M., Bui-Quoc, T., & Therriault, D. (2010). Final Report – Pratt & Whitney specialized bi-axial fatigue testing specimens. (Rapport technique). Non disponible
Lévesque, M., Bui-Quoc, T., Therriault, D., & Lourdel, N. (2010). Task 1 Report – Bi-axial fatigue setup and testing for Pratt & Whitney US. (Rapport technique). Non disponible
Lin, H. (2010). Biomechanical Modeling of Vertebral Mechanobiological Growth and of the Deformation Process in Adolescent Idiopathic Scoliosis [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Ma, S., Boukas, E.-K., & Chinniah, Y. A. (2010). Stability and stabilization of discrete-time singular Markov jump systems with time-varying delay. International Journal of Robust and Nonlinear Control, 20(5), 531-543. Lien externe
Mahvash, A., & Lakis, A. A. (juin 2010). Application of multi-sensor data acquisition and fourier transform in separation of vibration sources [Communication écrite]. 23rd International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2010), Nara, Japan. Non disponible
Malouin, B. (2010). Prediction of Aerodynamic Coefficients using Proper Orthogonal Decomposition [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Marcotte, D., Pasquier, P., Sheriff, F., & Bernier, M. (2010). The importance of axial effects for borehole design of geothermal heat-pump systems. Renewable Energy, 35(4), 763-770. Lien externe
Marouene, A. (2010). Comportement sous choc des composites sandwichs et influence des paramètres des matériaux et du test [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Martino, J., Aubin, C.-É., Parent, S., & Labelle, H. (octobre 2010). Optimization method of 3D correction and biomechanical forces during the AIS surgery with a vertebral derotation maneuver : preliminary results [Communication écrite]. 40e réunion annuelle de la Société de Scoliose du Québec, Burlington, VT.. Non disponible
McSorley, G., Huet, G., Culley, S. J., & Fortin, C. (août 2009). Application of failure modes and effects analysis to support product in-use information feedback [Communication écrite]. ASME International Design Engineering Technical Conferences and Computers and Information In Engineering Conference (DETC 2009), San Diego, CA. Lien externe
Menard, M., Dusseault, J., Langlois, G., Baille, W. E., Tam, S. K., Yahia, L., Zhu, X. X., & Halle, J.-P. (2010). Role of protein contaminants in the immunogenicity of alginates. Journal of Biomedical Materials Research. Part B, Applied Biomaterials, 93(2), 333-340. Lien externe
Miao, H. Y. (2010). Numerical and Theoretical Study of Shot Peening and Stress Peen Forming Process [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Miao, H. Y., Demers, D., Larose, S., Perron, C., & Lévesque, M. (2010). Experimental study of shot peening and stress peen forming. Journal of Materials Processing Technology, 210(15), 2089-2102. Lien externe
Miao, H. Y., Larose, S., Perron, C., & Lévesque, M. (2010). An analytical approach to relate shot peening parameters to Almen intensity. Surface and Coatings Technology, 205(7), 2055-2066. Lien externe
Michel, L. (2010). Étude et caractérisation des phénomènes d'éclatement et d'explosion des pneus de camion. [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Mulon, P. Y., Zhim, F., Yahia, L., & Desrochers, A. (2010). The Effect of Six Knotting Methods on the Biomechanical Properties of Three Large Diameter Absorbable Suture Materials. Veterinary Surgery, 39(5), 561-565. Lien externe
Mureithi, N. W. (juillet 2009). American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP: Introduction [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2009), Prague, Czech republic. Non disponible
Mureithi, N. W. (août 2010). On the Feasibility of Modeling Two-Phase Flow-Induced Fluidelastic Instability in Tube Bundles [Communication écrite]. 3rd ASME Joint US-European Fluids Engineering Summer Meeting collocated with 8th International Conference on Nanochannels, Microchannels, and Minichannels (FEDSM-ICNMM 2010), Montreal, Quebec, Canada. Lien externe
Mureithi, N. W., Huynh, K., & Pham, A. (juillet 2009). Low order model dynamics of the forced cylinder wake [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2009), Prague, Czech republic. Lien externe
Mureithi, N. W., Huynh, K., Rodriguez, M., & Pham, A. (2010). A Simple Low Order Model of the Forced Karman Wake. International Journal of Mechanical Sciences, 52(11), 1522-1534. Lien externe
Mureithi, N. W., Sawadogo, T. P., & Grie, A. A. C. (mai 2010). Estimation of the Fluidelastic Instability Boundary for Steam-Generator Tubes Subjected to Two-Phase Flows [Communication écrite]. 18th International Conference on Nuclear Engineering, Xi'an, China. Lien externe
Nafi, A., & Mayer, J. R. R. (mai 2010). Identification of scale and squareness errors on a CMM using a step gauge measured based on the ASME 89.4.10360.2-2008 standard [Communication écrite]. 38th Annual North American Manufacturing Research Conference (NAMRC 2010), Kingston, ON, Canada. Non disponible
Nafi, A., Mayer, J. R. R., & Wozniak, A. (avril 2010). Configurations selection for the separation of machine and probe errors on a CMM by a redundancy method [Communication écrite]. 9th International Scientific Conference Coordinate Measuring Technique, Bielsko-biala-Ustron, Poland. Non disponible
Ndiaye, D., & Bernier, M. (2010). Dynamic model of a hermetic reciprocating compressor in on-off cycling operation. Applied Thermal Engineering, 30(8-9), 792-799. Lien externe
Ndiaye, D., & Bernier, M. (2010). Transient modeling of refrigerant-to-air fin-and-tube heat exchangers. HVAC and R Research, 16(3), 355-381. Lien externe
Necciari, R., Teyssedou, A., & Reggio, M. (mai 2010). Numerical simulation of cross-flow in tube bundles to model flow circulation of the moderator in CANDU-6 [Communication écrite]. 31th CNS Annual Conference, Montréal, Québec. Non disponible
Nowlan, I., Ross, A., & Pettigrew, M. J. (juillet 2009). Dynamic interaction between a straight tube and an anti-vibration bar [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2009), Prague, Czech republic. Lien externe
Oulmane, A., Lakis, A. A., & Mureithi, N. W. (2010). Monitoring of bearing PW100 #5 tested at National Research Center in Ottawa. (Rapport technique). Non disponible
Pang, L., Kishawy, H. A., & Balazinski, M. (mai 2010). GA based optimization for determining Johnson-Cook material parameters under orthogonal cutting conditions [Communication écrite]. 38th Annual North American Manufacturing Research Conference (NAMRC 2010), Kingston, ON, Canada. Non disponible
Pasha, S., Sangole, A. P., Aubin, C.-É., Parent, S., Mac-Thiong, J. M., & Labelle, H. (2010). Characterizing Pelvis Dynamics in Adolescent With Idiopathic Scoliosis. Spine, 35(17), E820-E826. Lien externe
Pelletier, D. (2010). Verification, Validation, and Uncertainty in Computational Fluids Dynamic. Canadian Journal of Civil Engineering, 37(7), 1003-1013. Lien externe
Pelletier, D., & Ilinca, F. (janvier 2010). Adaptivity and uncertainty: Towards rigorous verification and validation of flow simulations [Communication écrite]. 48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, Orlando, FL, United states. Lien externe
Pelletier, D., Étienne, S., & Garon, A. (mai 2010). Vérification, validation, incertitudes et maillages adaptatifs [Communication écrite]. Conférence CRM-Giref sur l'adaptation de maillage et l'estimation d'erreur, Québec, Canada. Non disponible
Périé-Curnier, D., & Curnier, D. (2010). Effect of pathology type and severity on the distribution of MRI signal intensities within the degenerated nucleus pulposus: application to idiopathic scoliosis and spondylolisthesis. BMC Musculoskeletal Disorders, 11(1). Disponible
Phan, P., Mezghani, N., Nault, M. L., Aubin, C.-É., Parent, S., De Guise, J., & Labelle, H. (2010). A Decision Tree Can Increase Accuracy When Assessing Curve Types According to Lenke Classification of Adolescent Idiopathic Scoliosis. Spine, 35(10), 1054-1059. Lien externe
Philippe, M., Bernier, M., & Marchio, D. (2010). Sizing Calculation Spreadsheet Vertical Geothermal Borefields. ASHRAE Journal, 52(7), 20-28. Non disponible
Poirier, J., Gasser, A., Huger, M., & Rigaud, M. (2010). FIRE : un réseau d'excellence dans le domaine des réfractaires. Verre, 16(2), 24-26. Non disponible
Pouponneau, P., Savadogo, O., Napporn, T., Yahia, L., & Martel, S. (2010). Corrosion study of iron-cobalt alloys for MRI-based propulsion embedded in untethered microdevices operating in the vascular network. Journal of Biomedical Materials Research. Part B, Applied Biomaterials, 93(1), 203-211. Lien externe
Qin, Z., Baron, L., & Birglen, L. (2010). A new approach to the dynamic parameter identification of robotic manipulators. Robotica, 28(4), 539-547. Lien externe
Qun, R., Baron, L., Balazinski, M., & Jemielniak, K. (juin 2009). Fuzzy cutting force modeling in micro-milling using subtractive clustering for learning evaluation [Communication écrite]. 2nd International Conference Process Machine Interactions, Vancouver, British Columbia. Non disponible
Qun, R., Baron, L., Balazinski, M., & Jemielniak, K. (juin 2009). Machinability of Titanium metal matrix composites [Communication écrite]. 2nd International Conference Process Machine Interactions, Vancouver, British Columbia. Non disponible
Raison, M., Aubin, C.-É., Detrembleur, C., Fisette, P., Mahaudens, P., & Samin, J.-C. (septembre 2010). Quantification of global intervertebral torques during gait: comparison between two subjects with different scoliosis severities [Communication écrite]. 8th Biennial Meeting of the International Research Society of Spinal Deformities (IRSSD 2010), Montréal, Québec. Lien externe
Raison, M., Aubin, C.-É., Detrembleur, C., Fisette, P., Mahaudens, P., & Samin, J.-C. (juillet 2010). Quantification of intervertebral efforts during gait : comparison between subjects with different scoliosis severities [Communication écrite]. International Research Society of Spinal Deformities Meeting, Montréal, Québec. Non disponible
Raison, M., Aubin, C.-É., Detrembleur, C., Mahudens, P., Mousny, M., Fisette, P., & Samin, J. C. (octobre 2010). Quantification des efforts intervertébraux au cours de la marche : comparaison entre sujets sains et scoliotiques [Communication écrite]. 40e réunion annuelle de la Société de Scoliose du Québec, Burlington, VT.. Non disponible
Ramzi, R., & Lakis, A. A. (août 2010). Effects of fluid flow nonlinearities on the dynamic behaviour of cylindrical shells subjected to a supersonic flow [Communication écrite]. 3rd Joint US-European Fluids Engineering Summer Meeting and 8th International Conference on Nanochannels, Microchannels and Minichannels, Montréal, Québec. Lien externe
Ren, Q., Baron, L., Balazinski, M., & Jemielniak, K. (juillet 2010). Acoustic emission signal feature analysis using type-2 fuzzy logic System [Communication écrite]. Annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2010), Toronto, Canada. Lien externe
Ren, Q., Baron, L., Jemielniak, K., & Balazinski, M. (juillet 2010). Modelling of Dynamic Micromilling Cutting Forces Using Type-2 Fuzzy Rule-Based System [Communication écrite]. IEEE International Conference on Fuzzy Systems, Barcelona, Spain. Lien externe
Rifay, M. (2010). Fabrication de panneaux auto-raidis par injection flexible [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Rigaud, M. (janvier 2010). The Federation for International Refractory Research and Education (FIRE): Progress and Outcome on Education, Research and Industrial Partnership [Communication écrite]. 12th International Ceramics Congress - Advances in Sciences and Technology, Switzerland. Lien externe
Rigaud, M. (mars 2010). FIRE : An example of coopetition to contribute to the prosperity of the refractory industry [Communication écrite]. 46th ACeRS meeting, St-Louis Section RCD. Non disponible
Rigaud, M. (2010). FIRE at CIMTEC. Refractories World Forum, 2(3), 68-68. Non disponible
Rigaud, M. (octobre 2010). An International Education for Refractories Engineers : The FIRE's Experience [Communication écrite]. 5th International Symposium on Advanced in Refractories V, The Michel Rigaud Symposium, Vancouver, BC. Non disponible
Rigaud, M., Harmuth, H., & Buchberger, B. (2010). FIRE : Its relevance to the prosperity of the refractory industry. RHI bulletin, 1, 35-37. Non disponible
Robert, A., & Kummert, M. (décembre 2010). Designing net zero energy buildings for the future climate, not fore the past [Communication écrite]. 8th International Conference on System Simulation in Buildings (SSB 2010), Liège, Belgique. Non disponible
Ruiz, E., Achim, V., & Lebel, F. (juillet 2010). Characterization, analysis and design of RTM process [Communication écrite]. 10th International Conference on Flow Processes in Composite Materials, Monte Verità, Ascona, Switzerland. Lien externe
Ruiz, E., Demaria, C., Trochu, F., Dambrine, B., & Godon, T. (avril 2010). Advanced process simulation of resin transfer molding and application to fan blades for an aircraft engine [Communication écrite]. Forum des Journées européennes des composites, Paris, France. Non disponible
Ruiz, E., Demaria, C., Trochu, F., Dambrine, B., & Godon, T. (juillet 2010). Simulation of resin transfer molding processing of a composite fan blade for an aircraft engine [Communication écrite]. 10th International Conference on Flow Processes in Composite Materials, Monte Verità, Ascona, Switzerland. Non disponible
Sabourin, M., Thibault, D., Bouffard, D. A., & Lévesque, M. (septembre 2010). New parameters influencing runner life [Communication écrite]. 25th IARH Symposium on Hydraulic Machinery and Systems, Timisoara, Romania. Lien externe
Sabourin, M., Thibault, D., Bouffard, D.-A., & Lévesque, M. (septembre 2010). Hydraulic runner design method for lifetime [Communication écrite]. 25th IAHR Symposium on Hydraulic Machinery and Systems, Timisoara, Romania. Publié dans International Journal of Fluid Machinery and Systems, 3(4). Lien externe
Sabri, F., & Lakis, A. A. (août 2010). Aerothermoelastic stability of functionally graded circular cylindrical shells [Communication écrite]. 3rd ASME Joint US-European Fluids Engineering Summer Meeting, collocated with 8th International Conference on Nanochannels, Microchannels and Minichannels, Montréal, Québec. Lien externe
Sabri, F., & Lakis, A. A. (avril 2010). Effects of sloshing on flutter prediction of partially liquid filled circular cylindrical shell [Communication écrite]. 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Orlando, FL, United states. Lien externe
Sabri, F., & Lakis, A. A. (2010). Finite element method applied to supersonic flutter of circular cylindrical shells. AIAA Journal, 48(1), 73-81. Lien externe
Sabri, F., & Lakis, A. A. (2010). Hybrid finite element method applied to supersonic flutter of an empty or partially liquid-filled truncated conical shell. Journal of Sound and Vibration, 329(3), 302-316. Lien externe
Sangole, A. P., Aubin, C.-É., Labelle, H., Lenke, L., Jackson, R., Newton, P., & Stokes, I. A. F. (2010). The Central Hip Vertical Axis a Reference Axis for the Scoliosis Research Society Three-Dimensional Classification of Idiopathic Scoliosis. Spine, 35(12), E530-E534. Lien externe
Schmidt, H., Shirazi-Adl, A., Galbusera, F., & Wilke, H.-J. (février 2010). The lumbar spine during daily activities - a finite element analysis [Communication écrite]. 9th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Valencia, Spain. Non disponible
Schmidt, H., Shirazi-Adl, A., Galbusera, F., & Wilke, H.-J. (2010). Response analysis of the lumbar spine during regular daily activities-a finite element analysis. Journal of Biomechanics, 43(10), 1849-1856. Lien externe
Senez, H. (2010). Étude des forces dues à la turbulence dans un écoulement diphasique transverse sur un faisceau de tubes en configuration triangulaire tournée. [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Séoud, L., Adankon, M. M., Labelle, H., Dansereau, J., & Cheriet, F. (avril 2010). Prediction of scoliosis curve type based on the analysis of trunk surface topography [Communication écrite]. 7th IEEE International Symposium on Biomedical Imaging: From Nano to Macro, Rotterdam, The Netherlands. Lien externe
Séoud, L., Adankon, M. M., Labelle, H., Dansereau, J., & Cheriet, F. (juin 2010). Towards Non Invasive Diagnosis of Scoliosis Using Semi-Supervised Learning Approach [Communication écrite]. 7th International Conference Image Analysis and Recognition (ICIAR 2010), Povoa de Varzim, Portugal. Lien externe
Sergerie, K. (2010). Comparaison in vitro de la réponse mécanobiologique d'explants de plaques de croissance porcines sous chargements statique et dynamique. [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Sergerie, K., Beauchemin, P.-F., Moldovan, F., Parent, S., & Villemure, I. (juillet 2010). Response of Growth plate explants under static and dynamic loading : A histomorphological study [Communication écrite]. International Research Society of Spinal Deformities Meeting, Montréal, Québec. Non disponible
Shi, L., Wang, D., Driscoll, M., Chu, W. C., Villemure, I., Cheng, J. C., & Aubin, C.-É. (juillet 2010). Biomechanical modelling of altered growth pattern in adolescent idiopathic scoliosis [Communication écrite]. 17th International Meeting on Advanced Spine Techniques, Toronto, Canada. Lien externe
Shirazi, R., & Shirazi-Adl, A. (mars 2010). Osteochondral defects markedly alter knee joint contact stresses and cartilage strains : a finite element study [Communication écrite]. 56th annual meeting of Orthopaedic Research Society, New Orleans, Louisiana. Lien externe
Shirazi, R., Bae, W., Sah, R., & Shirazi-Adl, A. (mars 2010). The role of collagen fibrils networks in the strian and stiffness of articular cartilage during indentation probing [Communication écrite]. 56th annual meeting of Orthopaedic Research Society, New Orleans, Louisiana. Lien externe
Shirazi-Adl, A., Taheri, M., & Urban, J. P. G. (2010). Analysis of cell viability in intervertebral disc: Effect of endplate permeability on cell population. Journal of Biomechanics, 43(7), 1330-1336. Lien externe
Sim, W. G., & Mureithi, N. W. An Evaluation of a Two-Phase Damping Model on Tube Bundles Subjected to Two-Phase Cross Flow [Communication écrite]. ASME 2010 3rd joint US-European Fluids Engineering Summer Meeting, Montreal, Qc, Canada. Lien externe
Sim, W. G., Bae, B. M., & Mureithi, N. W. (2010). An Experimental Study on Characteristics of Two-Phase Flows in Vertical Pipe. Journal of Mechanical Science and Technology, 24(10), 1981-1988. Lien externe
Sim, W. G., Mureithi, N. W., & Pettigrew, M. J. (2010). Parametric study of two-phase flow by integral analysis based on power law distribution. Journal of Mechanical Science and Technology, 24(7), 1379-1387. Lien externe
Sirois, Y. (2010). Adaptation de maillages hybrides et application aux simulations d'équipements de combustion. [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Slamani, M., Mayer, J. R. R., Balazinski, M., & Engin, S. (2010). Identification and Compensation of Dynamic Scale Mismatches in High-Speed End Mill Boring Trajectory on CNC Machines. Journal of Manufacturing Science and Engineering, 132(3), 034501-034501. Lien externe
Slamani, M., Mayer, J. R. R., Balazinski, M., Zargarbashi, S. H. H., Engin, S., & Lartigue, C. (2010). Dynamic and geometric error assessment of an XYC axis subset on five-axis high-speed machine tools using programmed end point constraint measurements. International Journal of Advanced Manufacturing Technology, 50(9-12), 1063-1073. Lien externe
Taheri, M., Shirazi-Adl, A., & Urban, J. P. G. (mars 2010). Endplate permeability regulates nutrient supply and cell population in intervertebral discs : a cell viability model study [Communication écrite]. 56th annual meeting of Orthopaedic Research Society, New Orleans, Louisiana. Lien externe
Tail, M., Yacout, S., & Balazinski, M. (2010). Replacement time of a cutting tool subject to variable speed. Proceedings of the Institution of Mechanical Engineers. Part B, Journal of Engineering Manufacture, 224(3), 373-383. Lien externe
Tehrani, A. F., Givi, M., & Afghan, A. S. (novembre 2010). Investigation of magnetic abrasive finishing for internal polishing of aluminium tubes using DOE [Communication écrite]. ASME International Mechanical Engineering Congress and Exposition (IMECE 2010), Vancouver, BC, Canada. Lien externe
Toche Fumchum, L. B. (2010). A Product Lifecycle Management Framework to Support the Exchange of Prototyping and Testing Information. [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Toorani, M. H., Lakis, A. A., & Bursuc, G. (août 2010). Dynamic analysis of cylindrical shells subjected to flowing fluid and fluid surface effect [Communication écrite]. 7th International Symposium on Fluid-Structure Interactions, Flow-Sound Interactions and Flow-Induced Vibration & Noise, Montréal, Québec. Non disponible
Torra, V., Isalgue, A., Martorell, F., Lovey, F. C., & Terriault, P. (2010). Damping in civil engineering using SMA. Part I: Particular properties of CuAlBe for damping of family houses. Canadian Metallurgical Quarterly, 49(2), 179-190. Lien externe
Trudeau, P. A. (2010). Analysis and Optimization of a New Method for Creating Sandwich Composites Using Polyurethane Foam. [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Trudeau, P., & Ruiz, E. (juillet 2010). Optimizing the fibre wetting in a novel polyurethane foam sandwich composite [Communication écrite]. 10th International Conference on Flow Processes in Composite Materials, Monte Verità, Ascona, Switzerland. Lien externe
Turenne, S., Clin, T., Vasilevskiy, D., & Masut, R. A. (2010). Finite element thermomechanical modeling of large area thermoelectric generators based on bismuth telluride alloys. Journal of Electronic Materials, 39(9), 1926-1933. Lien externe
Ueno, S. (2010). Investigation of a Plasma Gurney Flap for Lift Enhancement [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Valteau, B., Grimard, G., Londono, I., Moldovan, F., & Villemure, I. (octobre 2010). Effets In Vivo de la compression statique versus dynamique sur le taux de croissance et l'histomorphométrie de la plaque de croissance [Communication écrite]. 40e réunion annuelle de la Société de Scoliose du Québec, Burlington, VT. Non disponible
Vasilevskiy, D., Dawood, M. S., Masse, J.-P., Turenne, S., & Masut, R. A. (2010). Generation of nanosized particles during mechanical alloying and their evolution through the hot extrusion process in bismuth-telluride-based alloys. Journal of Electronic Materials, 39(9), 1890-1896. Lien externe
Verreman, Y. (2010). Short crack propagation. Dans Fatigue of materials and structures, fundamentals (p. 269-309). Lien externe
Versailles, P. (2010). Contrôle du retour de flamme dans le prémélangeur des turbines à gaz. [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Versailles, P., Gingras-Gosselin, V., & Vo, H. D. (2010). Impact of pressure and temperature on the performance of plasma actuators. AIAA Journal, 48(4), 859-863. Lien externe
Vétel, J., Garon, A., & Pelletier, D. (août 2010). Analysis of complex Flows from Experimental data and Numerical Experiments [Communication écrite]. 3rd Joint US-European Fluids engineering Summer Meeting, Montréal, Québec. Lien externe
Vétel, J., Garon, A., & Pelletier, D. (2010). Vortex identification methods based on temporal signal-processing of time-resolved PIV data. Experiments in Fluids, 48(3), 441-459. Lien externe
Vivien, G. (2010). Modélisation d'une vanne à tournant sphérique munie d'un joint de polymère viscoélastique [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Vo, H. D. (2010). Role of tip clearance flow in rotating instabilities and nonsynchronous vibrations. Journal of Propulsion and Power, 26(3), 556-561. Lien externe
Vo, H. D. (2010). Rotating stall suppression in axial compressors with casing plasma actuation. Journal of Propulsion and Power, 26(4), 808-818. Lien externe
Wagnac, É., Michardière, D., Garo, A., Arnoux, P.-J., Mac-Thiong, J.-M., & Aubin, C.-É. (juillet 2010). Biomechanical analysis of pedicle screw placement: a feasibility study [Communication écrite]. 8th Biennial Meeting of the International Research Society of Spinal Deformities (IRSSD 2010), Montréal, Québec. Lien externe
Wakula, Y., Parent, S., & Villemure, I. (juillet 2010). Characterization of in vivo vertebral growth modulation by shape memory alloy staples on a porcine model for the correction of scoliosis [Communication écrite]. International Research Society of Spinal Deformities Meeting, Montréal, Québec. Non disponible
Wang, W. P., Bazrgari, B., Shirazi-Adl, A., Rakheja, S., & Boileau, P. E. (juin 2009). Biodynamic response and spinal load estimation of seated body in vibration using finite element modeling [Communication écrite]. 4th International Conference on Whole Body Vibration Injuries, Montréal, Québec. Publié dans Industrial Health, 48(5). Lien externe
Wang, X., Aubin, C.-É., Labelle, H., & Crandall, D. (juillet 2010). Biomechanical comparison of force levels in spinal instrumentation using monoaxial vs. multi-degree of freedom post-loading pedicle screws [Communication écrite]. 17th International Meeting on Advanced Spine Techniques (IMAST 2010), Toronto, Ont.. Lien externe
Wang, X., Aubin, C.-É., Labelle, H., & Crandall, D. (juin 2010). Biomechanical modeling of nonstructural spinal curves for scoliosis instrumentation simulation [Communication écrite]. 8th International Research Society for Spinal Deformities Meeting (IRSSD 2010), Montréal, Québec. Non disponible
Wang, X., Aubin, C.-É., Robitaille, I., & Labelle, H. (octobre 2010). Biomechanical comparison of different screw densities for the instrumentation of the scoliotic spine [Communication écrite]. 40e réunion annuelle de la Société de Scoliose du Québec, Burlington, VT.. Non disponible
Wang, Z., Parent, S., De Guise, J. A., & Labelle, H. (2010). A variability study of computerized sagittal sacral radiologic measures. Spine, 35(1), 71-75. Lien externe
Wong, G., Turgeon, I., Franco, A., Leduc, D., Larouche, G., Lacroix, G., Aubin, C.-É., & Moreau, A. (octobre 2010). Role of osteopontin and mechanotransduction in the initiation of AIS and progression of spinal deformities [Communication écrite]. 40e réunion annuelle de la Société de Scoliose du Québec, Burlington, VT.. Non disponible
Woscu, R., Sergerie, K., Lacoursiere, M.-O., Lévesque, M., & Villemure, I. (octobre 2010). Les propriétés mécaniques intrisèques de la plaque de croissance porcine varient avec les stades développementaux [Communication écrite]. 40e Réunion annuelle de la Société de scoliose du Québec, Burlington, VT. Non disponible
Xu, X. F., Vo, H. D., Mureithi, N. W., & Zhang, X. F. (novembre 2010). Turbulent Boundary Layer Separation Control by Using Dbd Plasma Actuators: Part I - Experimental Investigation [Communication écrite]. ASME International Mechanical Engineering Congress and Exposition (IMECE 2010), Vancouver, BC, Canada. Lien externe
Xu, X. F., Vo, H. D., Mureithi, N. W., & Zhang, X. F. (novembre 2010). Turbulent Boundary Layer Separation Control by Using Dbd Plasma Actuators: Part II - Numerical Model Validation and Parametric Study [Communication écrite]. ASME International Mechanical Engineering Congress and Exposition (IMECE 2010), Vancouver, BC, Canada. Lien externe
Zhang, J., Xia, Y., & Boukas, E.-K. (2010). New Approach to H-Infinity Control for Markovian Jump Singular Systems. IET Control Theory and Applications, 4(11), 2273-2284. Lien externe
Zhang, L. J., Zhang, L., Marchand, L., & Pierre, S. (2010). Mobility management protocols design for IPv6-based wireless and mobile networks. Dans Ilyas, M., & Ahson, S. A. (édit.), Fixed mobile convergence handbook (p. 237-263). Lien externe
Zhang, L., Boukas, E.-K., Baron, L., & Karimi, H. R. (2010). Fault detection for discrete-time Markov jump linear systems with partially known transition probabilities. International Journal of Control, 83(8), 1564-1572. Lien externe
Zhang, X., Boukas, E.-K., Liu, Y., & Baron, L. (2010). Asymptotic stabilization of high-order feedforward systems with delays in the input. International Journal of Robust and Nonlinear Control, 20(12), 1395-1406. Lien externe