 | Up a level |
Abedrabbo, G., Absil, P. A., Mahaudens, P., Detrembleur, C., Raison, M., Mousny, M., & Fisette, P. (2012, May). A multibody-bases approach to the computation of spine intervertebral motions in scoliotic patients [Paper]. 2nd Joint International Conference on Multibody System Dynamics (IMSD 2012), Stuttgart, Allemagne. Unavailable
Abedrabbo, G., Fisette, P., Absil, P., Mahaudens, P., Detrembleur, C., Raison, M., Banse, X., Aubin, C.-É., & Mousny, M. (2012, July). Computation of spine intervertebral motions in scoliotic patients: a multibody-based approach [Paper]. 9th Biennial Meeting of the International Society of Spinal Deformities, Poznan, Pologne. Unavailable
Abedrabbo, G., Fisette, P., Absil, P.-A., Mahaudens, P., Detrembleur, C., Raison, M., Banse, X., Aubin, C.-É., & Mousny, M. (2012, July). A multibody-based approach to the computation of spine intervertebral motions in scoliotic patients [Paper]. 9th Biennial Meeting of the International Research Society of Spinal Deformities (IRSSD 2012), Poznan, Poland. External link
Achiche, S., & Wozniak, A. (2012). Three-dimensional modeling of coordinate measuring machines probing accuracy and settings using fuzzy knowledge bases: Application to TP6 and TP200 triggering probes. Artificial Intelligence for Engineering Design, Analysis and Manufacturing (AIEDAM), 26(4), 425-441. External link
Achiche, S., Howard, T. J., McAloone, T. C., & Baron, L. (2012). Investigating features influence in fuzzy modelling of mass perception of non-functional 3D CAD forms. International Journal of Product Development, 16(2), 112-139. External link
Achiche, S., Howard, T., Astavaldsdottir, A., Andersen, O., & McAloone, T. Innovation practices in a cluster context [Paper]. 12th International Design Conference, Dubrovnik, Croatia. External link
Achiche, S., Howard, T., McAloone, T., Deng, L., & Baron, L. Underlying the relationships between success criteria & success factors in NPD activities [Paper]. 12th International Design Conference, Dubrovnik, Croatia. External link
Adankon, M. M., Dansereau, J., Parent, S., Labelle, H., & Cheriet, F. (2012, February). Scoliosis curve type classification using kernel machine from 3D trunk image [Paper]. Medical Imaging 2012 : Computer-Aided Diagnosis, San Diego, California, USA. External link
Adouni, M., Shirazi-Adl, A., & Shirazi, R. (2012, February). Computational biodynamics of human knee joint in gait cycle: from muscle forces to cartilage stresses [Paper]. 58th Annual Meeting of the Orthopaedic Research Society, San Francisco, Californie. Unavailable
Adouni, M., Shirazi-Adl, A., & Shirazi, R. (2012). Computational Biodynamics of Human Knee Joint in Gait: From Muscle Forces to Cartilage Stresses. Journal of Biomechanics, 45(12), 2149-2156. External link
Adouni, M., Shirazi-Adl, A., & Shirazi, R. (2012, July). Response analysis of human knee joint during gait [Paper]. 18th Congress of the European Society of Biomechanics (ESB 2012), Lisbon, Portugal. Published in Journal of Biomechanics, 45(Suppl. 1). External link
Aïssa, B., Haddad, E., Jamroz, W., Hassani, S., Farahani, R. D., Merle, P. G., & Therriault, D. (2012). Micromechanical characterization of single-walled carbon nanotube reinforced ethylidene norbornene nanocomposites for self-healing applications. Smart Materials and Structures, 21(10), 105028. Available
Aïssa, B., Nedil, M., Esam, A. H., Tabet, N., Therriault, D., & Rosei, F. (2012). Ambipolar operation of hybrid SiC-carbon nanotube based thin film transistors for logic circuits applications. Applied Physics Letters, 101(4), 043121. Available
Aissa, B., Tabet, N., Nedil, M., Therriault, D., Rosei, F., & Nechache, R. (2012). Electromagnetic Energy Absorption Potential and Microwave Heating Capacity of Sic Thin Films in the 1-16 Ghz Frequency Range. Applied Surface Science, 258(14), 5482-5485. External link
Aïssa, B., Therriault, D., Farahani, R. D., Laberge Lebel, L., & El Khakani, M. A. (2012). Electrical transport properties of single wall carbon nanotube/polyurethane composite based field effect transistors fabricated by UV-assisted direct-writing technology. Nanotechnology, 23(11), 115705 (8 pages). Available
Aïssa, B., Therriault, D., Haddad, E., & Jamroz, W. (2012). Self-Healing Materials Systems: Overview of Major Approaches and Recent Developed Technologies. Advances in Materials Science and Engineering, 2012, 17 pages. Available
Akçayöz, E. (2012). Performance Increase and Noise Reduction in Axial Compressor Cascades with Plasma Actuation [Ph.D. thesis, École Polytechnique de Montréal]. Available
Aliyu, M. D. S. (2012). 2-D of Nonlinear H-Infinity Certainty-Equivalent Filters (CEFs). Optimal Control Applications and Methods, 33(3), 263-275. External link
Aliyu, M. D. S. (2012). Corrections to 'H-Infinity Filtering for Singularly Perturbed Nonlinear Systems'. International Journal of Robust and Nonlinear Control, 22(13), 1537-1542. External link
Aliyu, M. D. S., & Boukas, E.-K. (2012). Erratum: Mixed H-2/H-infinity nonlinear filtering. International Journal of Robust and Nonlinear Control, 22(9), 1060-1062. External link
Aliyu, M. D. S., & Boukas, E.-K. (2012). H-Infinity Filtering for Nonlinear Singular Systems. IEEE Transactions on Circuits and Systems I-Regular Papers, 59(10), 2395-2404. External link
Allard, Y. (2012). Mesure et vérification du rendement et simulations calibrées d'un bâtiment résidentiel net zéro énergie Étude de cas: Abondance Montréal [Master's thesis, École Polytechnique de Montréal]. Available
Allard, Y., & Kummert, M. (2012, May). Suivi des performances et simulations calibrées d'un bâtiment résidentiel net zéro énergie [Paper]. eSim 2012 : the 7th conference of IBPSA-Canada, Halifax, Nova Scotia, Canada. Unavailable
Alloui, Z., & Vasseur, P. (2012). Double-Diffusive and Soret-Induced Convection in a Micropolar Fluid Layer. Computers & Fluids, 60, 99-107. External link
Alloui, Z., & Vasseur, P. (2012). Onset of Rayleigh-Benard Mhd Convection in a Micropolar Fluid. International Journal of Heat and Mass Transfer, 55(4), 1164-1169. External link
Alloui, Z., Guiet, J., Vasseur, P., & Reggio, M. (2012). Natural Convection of Nanofluids in a Shallow Rectangular Enclosure Heated From the Side. Canadian Journal of Chemical Engineering, 90(1), 69-78. External link
Alloui, Z., Khelifa, N. B., Beji, H., & Vasseur, P. (2012). Onset of convection in a horizontal porous layer saturated by a power-law fluid. Journal of Heat Transfer, 134(9). External link
Alloui, Z., Vasseur, P., & Reggio, M. (2012). Analytical and Numerical Study of Buoyancy-Driven Convection in a Vertical Enclosure Filled With Nanofluids. External link
Arabi Narehei, S. (2012). Unstructured Meshes for Large Rigid Body Motions Using Mapping Operators [Ph.D. thesis, École Polytechnique de Montréal]. Available
Aramesh, M., Balazinski, M., Attia, H., & Kishawy, H. (2012, May). An experimental investigation on the deformation process during cutting titanium metal matrix composites (TiMMCs) [Paper]. 1st International Conference on Virtual Machining Process Technology (VMPT 2012), Montréal, Québec. Unavailable
Aravi, S., Camarero, R., & Guibault, F. (2012, May). Unstructured mesh motion using sliding cells and mapping domains [Paper]. 20th Annual Conference of the CFD Society of Canada, Canmore,Alberta, Canada. Unavailable
Arjmand, N., Plamondon, A., Shirazi-Adl, A., Larivière, C., & Parnianpour, M. (2012, February). Regression equations for spinal loads in asymmetric lifting tasks using a finite element biomechanical model [Paper]. 58th Annual Meeting of the Orthopaedic Research Society, San Francisco, Californie. External link
Arjmand, N., Plamondon, A., Shirazi-Adl, A., Parnianpour, M., & Lariviere, C. (2012). Predictive equations for lumbar spine loads in load-dependent asymmetric one- and two-handed lifting activities. Clinical Biomechanics, 27(6), 537-544. External link
Arjmand, N., Shirazi-Adl, A., Plamondon, A., Parnianpour, M., & Larivière, C. (2012, July). Regression models for spinal loads in lifting using a complex finite element model [Paper]. 18th Congress of the European Society of Biomechanics (ESB 2012), Lisbon, Portugal. Published in Journal of Biomechanics, 45(Suppl. 1). External link
Arreguin-Zavala, J., Turenne, S., Martel, A., & Benaissa, A. (2012). Microwave Sintering of MoSi₂-Mo₅Si₃ to Promote a Final Nanometer-Scale Microstructure and Suppressing of Pesting Phenomenon. Materials Characterization, 68, 117-122. External link
Assoum, H. H., Sakout, A., Abed-Meraim, K., Alia, A., Hassan, M. E., & Vétel, J. (2012, June). Experimental investigation of the vibration of a slotted and a non-slotted plates and the acoustic field in a plane impinging jet [Paper]. 9th European Conference on Noise Control, EURONOISE 2012, Prague, Czech republic. Unavailable
Azizian, R. (2012). Dynamic Modeling of Tube-Support Interaction in Heat Exchangers [Ph.D. thesis, École Polytechnique de Montréal]. Available
Azizian, R., & Mureithi, N. W. (2012, July). Numerical analysis of intermittent stick-slip behaviour of tubesupport interaction in heat-exchangers [Paper]. ASME Pressure Vessels and Piping Conference (PVP 2012), Toronto, ON, Canada. External link
Bahrami, S., Beigi, H. M., & Sabour, M. H. (2011, December). Experimental study of an internal heat exchanger influence on R134a automobile air conditioning system [Paper]. Regional Conference on Automotive Research, ReCAR 20111, Kuala Lumpur, Malaysia. Unavailable
Bazrgari, B., Nussbaum, M. A., Madigan, M. L., & Shirazi-Adl, A. (2012, June). Trunk dynamic responses to sudden perturbations: effects of soft tissue wobbling [Paper]. 4th American Conference on Human Vibration, Hartford, Connecticut. Unavailable
Beaudette, K., Strupler, M., Benboujja, F., Parent, S., Aubin, C.-É., & Boudoux, C. (2012). Optical Coherence Tomography for the Identification of Musculoskeletal Structures of the Spine: a Pilot Study. Biomedical Optics Express, 3(3), 533-542. External link
Beausoleil-Morrison, I., Kummert, M., Macdonald, F., Jost, R., McDowell, T., & Ferguson, A. (2012, July). Demonstration of the new ESP-r and TRNSYS co-simulator for modelling solar buildings [Paper]. 1st International Conference on Solar Heating and Coolingfor Buildings and Industry (SHC 2012), San Francisco, California. Published in Energy Procedia, 30. Available
Béguin, C., Étienne, S., Pettigrew, M. J., & Mureithi, N. W. (2012, July). A model for drag coefficient in an idealized bubbly two-phase flow [Paper]. 10th International Conference on Flow-Induced Vibration (FIV 2012), Dublin, Ireland. Unavailable
Bejjani, R. (2012). Machinability and Modeling of Cutting Mechanism for Titanium Metal Matrix Composites [Ph.D. thesis, École Polytechnique de Montréal]. Available
Bejjani, R., Balazinski, M., Attia, H., & Kishawy, H. (2012, May). A study on adiabatic shear banding in chip segmentation when cutting TiMMC [Paper]. 1st International Conference on Virtual Machining Process Technology (VMPT 2012), Montréal, Québec. Unavailable
Ben Khelifa, N., Alloui, Z., Beji, H., & Vasseur, P. (2012). Natural Convection in a Horizontal Porous Cavity Filled With a Non-Newtonian Binary Fluid of Power-Law Type. Journal of Non-Newtonian Fluid Mechanics, 169, 15-25. External link
Ben Khelifa, N., Alloui, Z., Beji, H., & Vasseur, P. (2012). Natural Convection in a Vertical Porous Cavity Filled With a Non-Newtonian Binary Fluid. AICHE Journal, 58(6), 1704-1716. External link
Ben Khelifa, N., Alloui, Z., Beji, H., & Vasseur, P. (2012, May). Onset of convection in a horizontal porous cavity filled with a non- Newtonian binary fluid [Paper]. 6th International Conference on Thermal Engineering Theory and Applications, Istanbul, Turkey. Unavailable
Bertagnolio, S., Bernier, M., & Kummert, M. (2012). Comparing vertical ground heat exchanger models. Journal of Building Performance Simulation, 5(6), 369-383. External link
Boukas, E.-K., & Al-Sunni, F. M. (2012). Mechatronic systems: Analysis, design and implementation. External link
Bourgeois-Collin, L. (2012). Évaluation de modèles biphasiques linéaires pour la caractérisation mécanique de la plaque de croissance [Master's thesis, École Polytechnique de Montréal]. Available
Bouslah, B., Gharbi, A., & Pellerin, R. (2012, August). A simulation-based optimization approach for an integrated production and quality control model [Paper]. 4th International Conference on Information Systems, Logistics and Supply Chain (ILS 2012), Québec, Canada. External link
Brenner, M. W., Trépanier, J.-Y., Tribes, C., & Petro, E. (2012, September). Conceptual Design Framework for Blended Wing Body Aircraft [Paper]. 12th AIAA Aviation Technology, Integration and Operations Conference (ATIO 2012) and 14th AIAA/ISSM, Reston, VA, USA. External link
Brochu, M., Verreman, Y., Ajersch, F., & Bouchard, D. (2012). Propagation of short fatigue cracks in permanent and semi-solid mold 357 alumiunum alloy. International Journal of Fatigue, 36(1), 120-129. External link
Camelot, A. (2012). Modélisation des tâches pour la récupération de pièces réutilisables sur un avion en fin de vie [Master's thesis, École Polytechnique de Montréal]. Available
Cammarata, M., Wang, X., Mac-Thiong, J. M., & Aubin, C.-É. (2012, May). Analyse des facteurs biomécaniques impliqués dans la cyphose jonctionnelle proximale [Paper]. 32e journée de la recherche du Programme d'orthopédie Édouward-Samson (POES) et de la division d'orthopédie de l'Université de Montréal, Montréal, Québec, Canada. Unavailable
Cammarata, M., Wang, X., Mac-Thiong, J.-M., & Aubin, C.-É. (2012, July). Biomechanical Analysis of Proximal Junctional Kyphosis: Preliminary Results. [Paper]. 9th Biennial Meeting of the International Research Society of Spinal Deformities (IRSSD 2012), Poznan, Poland. External link
Caouette, C., Bureau, M., Vendittoli, P.- A., Lavigne, M., & Nuno, N. (2012). Anisotropic bone remodeling of a biomimetic metal-on-metal hip resurfacing implant. Medical Engineering and Physics, 34(5), 559-565. External link
Cartiaux, O., Aubin, C.-É., Labelle, H., & Cheriet, F. (2012, July). Toward the Next Generation of Simulator for Intraoperative Navigation of Scoliotic Spine Surgeries. [Paper]. 9th Biennial Meeting of the International Research Society of Spinal Deformities (IRSSD 2012), Poznan, Poland. External link
Causse, P., Ruiz, E., & Trochu, F. (2012). Spring-in behavior of curved composites manufactured by Flexible Injection. Composites Part A: Applied Science and Manufacturing, 43(11), 1901-1913. External link
Ceresara, S., Fanciulli, C., Passaretti, F., & Vasilevskiy, D. (2011, September). Influence of processing parameters on the thermoelectric properties of (Bi0.2Sb0.8)2Te3 sintered by ECAE [Paper]. 9th European Conference on Thermoelectrics: Ect 2011, Thessaloniki, Greece. External link
Charlot, L., Étienne, S., & Pelletier, D. (2012). A Continuous Lagrangian Sensitivity Equation Method for Incompressible Flow. Journal of Computational Physics, 231(18), 5989-6011. External link
Charlot, L., Étienne, S., Hay, A., & Pelletier, D. (2012, January). Free-surface flow lagrangian sensitivities [Paper]. 50th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, Nashville, TN. External link
Chevrefils, C., Cheriet, F., Grimard, G., Miron, M.-C., & Aubin, C.-É. (2012). Quantitative evaluation of an automatic segmentation method for 3D reconstruction of intervertebral scoliotic disks from MR images. BMC Medical Imaging, 12. Available
Chevrefils, C., Cheriet, F., Grimard, G., Miron, M.-C., & Aubin, C.-É. (2012). Quantitative Evaluation of an Automatic Segmentation Method for 3D Reconstruction of Intervertebral Scoliotic Disks From MR Images. BMC Medical Imaging, 12. External link
Cimmino, M., Bernier, M., & Pasquier, P. (2012, May). Utilisation des g-functions de Eskilson pour la simulation de systèmes géothermiques [Paper]. IBPSA-Canada - eSim, Halifax, N.S., Canada. External link
Cloutier, G., Hugo, R., & Sellens, R. (2012). Mapping the Relationship Between the CDIO Syllabus and the CEAB Graduate Attributes. International Journal of Quality Assurance in Engineering and Technology Education, 2(2), 34-44. External link
Costa, V. A. F., Sousa, A. C. M., & Vasseur, P. (2012). Natural convection in square enclosures filled with fluid-saturated porous media under the influence of the magnetic field induced by two parallel vertical electric currents. International Journal of Heat and Mass Transfer, 55(23-24), 7321-7329. External link
Couturier, P. (2012). Optimisation robuste des aéronefs et des groupes turboréacteurs [Master's thesis, École Polytechnique de Montréal]. Available
D'avignon, K., & Kummert, M. (2012, August). Proposed TRNSYS model for storage tank with encapsulated phase change materials [Paper]. Proceeding of SimBuild, 5th IBPSA-USA Conference, Madison, Wisconsin, USA. Unavailable
Dalir, H., Farahani, R. D., Nhim, V., Samson, B., Lévesque, M., & Therriault, D. (2012). Preparation of highly exfoliated polyester–clay nanocomposites: process–property correlations. Langmuir, 28(1), 791-803. External link
Dalir, H., Farahani, R. D., Nhim, V., Samson, B., Lévesque, M., & Therriault, D. (2012). Preparation of Highly Exfoliated Polyester–Clay Nanocomposites: Process–Property Correlations. Langmuir, 28(1), 791-803. Available
Daneshmand, F., Javanmard, S. A. S., Adamowski, J. A. N. F., Liaghat, T., & Moshksar, M. M. (2012). Two-Dimensional Natural Element Analysis of Double-Free Surface Flow Under a Radial Gate. Canadian Journal of Civil Engineering, 39(6), 643-653. External link
Delcroix, B., Kummert, M., Daoud, A., & Hiller, M. D. E. (2012, August). Conduction transfer functions in TRNSYS multizone building model : current implementation, limitations and possible improvements [Paper]. Proceeding of SimBuild, 5th IBPSA-USA Conference, Madison, Wisconsin, USA. External link
Delisle, V., & Kummert, M. (2012). Experimental study to characterize the performance of combined photovoltaic/thermal air collectors. Journal of Solar Energy Engineering, Transactions of the ASME, 134(3). External link
Deng, X., Huet, G., Tan, S., & Fortin, C. (2012). Product decomposition using design structure matrix for intellectual property protection in supply chain outsourcing. Computers in Industry, 63(6), 632-641. External link
Denninger, M., Huppe, N., Gou, M., Aubin, C.-É., & Rancourt, D. (2012). A Tunable Hand Biofidelity-Enhancing Device for Hybrid Iii Dummies. International Journal of Crashworthiness, 17(4), 377-383. External link
Desbiens-Blais, F., Clin, J., Parent, S., Labelle, H., & Aubin, C.-É. (2012). New brace design combining CAD/CAM and biomechanical simulation for the treatment of adolescent idiopathic scoliosis. Clinical Biomechanics, 27(10), 999-1005. External link
Desbiens-Blais, F., Clin, J., Parent, S., Labelle, H., & Aubin, C.-É. (2012, July). Standard Technique Vs. CAD/CAM and Biomechanical Simulations for the Design of Braces in Adolescent Idiopathic Scoliosis : First Results. [Abstract]. 9th Biennial Meeting of the International Research Society of Spinal Deformities (IRSSD 2012), Poznan, Poland. External link
Dominique, S., Trépanier, J.-Y., & Tribes, C. (2012). GATE: A genetic algorithm designed for expensive cost functions. International Journal of Mathematical Modelling and Numerical Optimisation, 3(1-2), 5-29. External link
Driscoll, C. R., Aubin, C.-É., Canet, F., Labelle, H., & Dansereau, J. (2012). Impact of Prone Surgical Positioning on the Scoliotic Spine. Journal of Spinal Disorders & Techniques, 25(3), 173-181. External link
Driscoll, C., Aubin, C.-É., Canet, F., Labelle, H., Horton, W., & Dansereau, J. (2012). Biomechanical Study of Patient Positioning: Influence of Lower Limb Positioning on Spinal Geometry. Journal of Spinal Disorders & Techniques, 25(2), 69-76. External link
Driscoll, M., Aubin, C.-É., Moreau, A., Wakula, Y., Sarwark, J. F., & Parent, S. (2012). Spinal Growth Modulation Using a Novel Intravertebral Epiphyseal Device in an Immature Porcine Model. European Spine Journal, 21(1), 138-144. External link
Drolet, M., Vo, H. D., & Mureithi, N. W. Effect of Tip Clearance on the Prediction of Non-Synchronous Vibrations in Axial Compressors [Paper]. ASME Turbo Expo. External link
El Hassan, M., Assoum, H. H., Sobolik, V., Vétel, J., Abed-Meraim, K., Garon, A., & Sakout, A. (2012). Experimental Investigation of the Wall Shear Stress and the Vortex Dynamics in a Circular Impinging Jet. Experiments in Fluids, 52(6), 1475-1489. External link
Erler, E. (2012). Axial Compressor Blade Design for Desensitization of Aerodynamic Performance and Stability to Tip Clearance [Ph.D. thesis, École Polytechnique de Montréal]. Available
Ermanni, P., Di Fratta, C., & Trochu, F. (2012). Molding: Liquid Composite Molding (LCM). In Wiley Encyclopedia of Composites (10 pages). External link
Eslami Nejad, P., & Bernier, M. (2012). Freezing of geothermal borehole surroundings : a numerical and experimental assessment with applications. Applied Energy, 98, 333-345. External link
Eslami Nejad, P., & Bernier, M. (2012, May). Simulations of a new double U-tube borehole configuration with solar heat injection and ground freezing [Paper]. IBPSA-Canada - eSim, Halifax, N.S., Canada. External link
Esmailzadeh, M., & Lakis, A. A. (2012, July). Random vibration prediction of a curved thin shell subjected to turbulent pressure boundary-layer induced pressure field [Paper]. 15th International Conference on Experimental Mechanics, Porto, Portugal. Unavailable
Esmailzadeh, M., & Lakis, A. A. (2012). Response of an open curved thin shell to a random pressure field arising from a turbulent boundary layer. Journal of Sound and Vibration, 331(2), 345-364. External link
Étienne, S., & Pelletier, D. (2012). The Low Reynolds Number Limit of Vortex-Induced Vibrations. Journal of Fluids and Structures, 31, 18-29. External link
Étienne, S., Garon, A., & Pelletier, D. (2012). Some manufactured solutions for verification of fluid-structure interaction codes. Computers and Structures, 106-107, 56-67. External link
Fanaei, A. E. (2012). Caractérisation expérimentale des écoulements capillaires dans les renforts fibreux à double échelle de porosité [Master's thesis, École Polytechnique de Montréal]. Available
Farahani, R. D., Dalir, H., Le Borgne, V., Gautier, L. A., El Khakani, M. A., Lévesque, M., & Therriault, D. (2012). Direct-write fabrication of freestanding nanocomposite strain sensors. Nanotechnology, 23(8), 085502 (10 pages). Available
Farahani, R. D., Dalir, H., Le Borgne, V., Gautier, L. A., El Khakani, M. A., Lévesque, M., & Therriault, D. (2012). Reinforcing epoxy nanocomposites with functionalized carbon nanotubes via biotin–streptavidin interactions. Composites Science and Technology, 72(12), 1387-1395. Available
Farahani, R. D., Lévesque, M., & Therriault, D. (2012, March). Nanocomposite materials in three-dimensional freestanding microsensors [Paper]. NanoQuebec, Montréal, Québec. Unavailable
Farahani, R. D., Pahlavanpour, M., Dalir, H., Aïssa, B., Khakani, M. A. E., Lévesque, M., & Therriault, D. (2012). Manufacturing composite beams reinforced with three-dimensionally patterned-oriented carbon nanotubes through microfluidic infiltration. Materials & Design, 41, 214-225. Available
Foley, G., Aubin, C.-É., Labelle, H., Sanders, J., D'astous, J., Johnston, C., & Parent, S. (2012, July). The Rib Vertebra Angle Difference and Its Measurement in 3d for the Evaluation of Early Onset Scoliosis. [Paper]. 9th Biennial Meeting of the International Research Society of Spinal Deformities (IRSSD 2012), Poznan, Poland. External link
Fotsing, E. R., Miron, F., Eury, Y., Ross, A., & Ruiz, E. (2012). Bonding Analysis of Carbon/Epoxy Composites With Viscoelastic Acrylic Adhesive. Composites Part B: Engineering, 43(5), 2087-2093. External link
Francucci, G., Vázquez, A., Rodríguez, E., & Ruiz, E. (2012, July). Influence of the type of fluid and injection conditions on the processing of natural fiver composites [Paper]. 11th International Conference on Flow Processes in Composite Materials (FPCM 2011), Auckland, New Zealand. External link
Francucci, G., Vazquez, A., Ruiz, E., & Rodriguez, E. S. (2012). Capillary effects in vacuum-assisted resin transfer molding with natural fibers. Polymer Composites, 33(9), 1593-1602. External link
Galvan, S., Reggio, M., & Guibault, F. (2012, July). Optimization of the inlet velocity profile in a conical diffuser [Paper]. Fluids Engineering Division Summer Meeting, Puerto Rico, USA. External link
García, J. A., Gascon, L., Ruiz, E., Lebel, F., & Trochu, F. (2012, July). Simulation and experimental validation of the saturation in LCM processes [Paper]. 11th International Conference on Flow Processes in Composite Materials (FPCM 2011), Auckland, New Zealand. External link
Gariépy, A. (2012). Finite Element Modelling of Shot Peening and Peen Forming Processes and Characterisation of Peened AA2024-T351 Aluminium Alloy [Ph.D. thesis, École Polytechnique de Montréal]. Available
Gariepy, A., Cyr, J., Levers, A., Perron, C., Bocher, P., & Lévesque, M. (2012). Potential applications of peen forming finite element modelling. Advances in Engineering Software, 52, 60-71. External link
Gariepy, A., Larose, S., Perron, C., Bocher, P., & Lévesque, M. (2012, June). Finite Element Peen Forming Simulation [Paper]. 13th International Conference on Aluminum Alloys (Icaa13), Pittsburgh, Penn., USA. External link
Gariepy, A., Perron, C., Bocher, P., & Lévesque, M. (2012, June). Finite Element Simulation of Shot Peening: Prediction of Residual Stresses and Surface Roughness [Paper]. 13th International Conference on Aluminum Alloys (Icaa13), Pittsburgh, Penn., USA. External link
Gariépy, M. (2012). Méthodes d'extraction et de décomposition de la traînée pour des écoulements permanents et transitoires [Ph.D. thesis, École Polytechnique de Montréal]. Available
Gariepy, M., & Trépanier, J.-Y. (2012). A new axial velocity defect formulation for a far-field drag decomposition method. Canadian aeronautics and space journal, 58(2), 69-82. External link
Gervais, J., Périé-Curnier, D., Parent, S., Labelle, H., & Aubin, C.-É. (2012). MRI signal distribution within the intervertebral disc as a biomarker of adolescent idiopathic scoliosis and spondylolisthesis. BMC Musculoskeletal Disorders, 13, 239. Available
Ghossein, E., & Lévesque, M. (2012). A fully automated numerical tool for a comprehensive validation of homogenization models and its application to spherical particles reinforced composites. International Journal of Solids and Structures, 49(11-12), 1387-1398. External link
Gosselin, F., Therriault, D., & Lévesque, M. (2012, February). Microfabrication of a spider-silk analogue through the liquid rope coiling instability [Paper]. APS March Meeting, Boston, MA, USA. External link
Guiassa, R. (2012). Méthodes de compensation des erreurs d'usinage utilisant la mesure sur machines-outils [Ph.D. thesis, École Polytechnique de Montréal]. Available
Guiassa, R., Mayer, J. R. R., & Balazinski, M. (2012, May). Continuous tool path compensation using discrete on machine measurement [Paper]. 1st International Conference on Virtual Machining Process Technology (VMPT 2012), Montréal, Québec. Unavailable
Guiet, J., Reggio, M., & Vasseur, P. (2012). Natural convection of nanofluids in a square enclosure with protruding heater. Advances in Mechanical Engineering, 2012, 11-11. External link
Guo, S.-Z., Heuzey, M.-C., & Therriault, D. (2012, March). Solvent-cast direct-write microfabrication of thermoplastic polymer nanocomposites 3D structures [Paper]. NanoQuebec, Montréal, Québec. Unavailable
Hachem, B., Aubin, C.-É., Driscoll, M., & Parent, S. (2012, July). Porcine Spine Finite Element Model as an Alternative Tool for the Validation of a Novel Fusionless Device. [Abstract]. 9th Biennial Meeting of the International Research Society of Spinal Deformities (IRSSD 2012), Poznan, Poland. External link
Hammoud, R., Boukhili, R., & Yahia, A. (2012, May). 3D constitutive law of concrete-Unified formulation [Paper]. International Conference on Numerical Modeling Strategies for Sustainable Concrete Structures (SSCS 2012), Aix-en-Provence, France. Unavailable
Hammoud, R., Boukhili, R., & Yahia, A. (2012, June). Chemoplastic modeling for concrete at high temperature : proceedings [Paper]. 7th International Conference on Structures in Fire, Zurich, Switzerland. Unavailable
Harmouche, R., Cheriet, F., Labelle, H., & Dansereau, J. (2012). 3D Registration of Mr and X-Ray Spine Images Using an Articulated Model. Computerized Medical Imaging and Graphics, 36(5), 410-418. External link
Hosseini, S. M. S. (2012). Detection of Hidden Corrosion by Pulsed Eddy Current Using Time Frequency Analysis [Ph.D. thesis, École Polytechnique de Montréal]. Available
Hosseini, S., & Lakis, A. A. (2012). Application of time-frequency analysis for automatic hidden corrosion detection in a multilayer aluminum structure using pulsed eddy current. NDT & E International, 47, 70-79. External link
Howard, T., Achiche, S., McAloone, T., & Ozckil, A. Open design and crowdsourcing: maturity, methodology and business models [Paper]. 12th International Design Conference, Dubrovnik, Croatia. External link
Huet, G., Fortin, C., & Zeng, Y. (2012, July). Theoretical foundations supporting the implementation of complementary information structures across the life of a product [Paper]. 11th ASME Biennial Conference on Engineering Systems Design and Analysis (ESDA 2012), Nantes, France. External link
Jalali, A. (2012). Dynamic Analysis of Isotropic and Laminated Reinforced Composite Plates Subjected to Flowing Fluid [Master's thesis, École Polytechnique de Montréal]. Available
Jendoubi, K., Merah, N., Bernard, M., & Bazoune, A. (2011, July). The effect of loading history on unstable fracture of austenitic steel (304) [Paper]. 14th International Conference on Advances in Materials and Processing Technologies, AMPT 2011, Istanbul, Turkey. Published in Advanced Materials Research, 445. External link
Joly, A., Étienne, S., & Pelletier, D. (2012). Erratum: Galloping of square cylinders in cross-flow at low Reynolds numbers. Journal of Fluids and Structures, 30, 226-226. External link
Joly, A., Étienne, S., & Pelletier, D. (2012). Galloping of Square Cylinders in Cross-Flow at Low Reynolds Numbers. Journal of Fluids and Structures, 28, 232-243. External link
Jost, R. (2012). Developing a Run-Time Coupling Between ESP-r and TRNSYS [Master's thesis, École Polytechnique de Montréal]. Available
Kang, H. S., Mureithi, N. W., & Pettigrew, M. J. (2012). Analytical solution for a vibrating simply-supported cylinder subjected to 2-D concentric annular flow, considering friction. Journal of Fluids and Structures, 35, 1-20. External link
Kashi, S., Keshavarz, M. K., Vasilevskiy, D., Masut, R. A., & Turenne, S. (2011, July). Effect of Surface Preparation on Mechanical Properties of Ni Contacts on Polycrystalline (Bi₁₋ₓSbₓ)₂(Te₁₋y Sey)₃ Alloys [Paper]. 30th International Conference on Thermoelectrics (ICT 2011), Traverse City, Michigan, USA. Published in Journal of Electronic Materials, 41(6). External link
Keshmiri, M., Jahromi, A. F., Mohebbi, A., Hadi Amoozgar, M., & Xie, W.-F. (2012). Modeling and control of ball and beam system using model based and non-model based control approaches. International Journal on Smart Sensing and Intelligent Systems, 5(1), 14-35. External link
Khalfi, B. (2012). Modélisation analytique pour l'étude du comportement vibratoire en régime transitoire d'une plaque avec tampon amortissant contraint [Ph.D. thesis, École Polytechnique de Montréal]. Available
Koanda, M. M. L. (2012). Optimisation des propriétés physiques d'un composite carbone époxy fabriqué par le procédé RFI [Master's thesis, École Polytechnique de Montréal]. Available
Kruzelecky, R. V., Aïssa, B., Wong, B., Haddad, E., Jamroz, W., Cloutis, E., Rosca, I. D., Hoa, S. V., Therriault, D., Ellery, A., Martel, S., & Jiang, X.-X. (2011, July). Project MoonDust: Characterization and Mitigation of Lunar Dust [Paper]. 41st International Conference on Environmental Systems, Portland, Oregon. Available
Laitenberger, M., Begon, M., & Raison, M. (2012, May). On the refinement of muscular dynamical modeling for muscle forces quantification [Paper]. 2nd Joint International Conference on Multibody System Dynamics (IMSD 2012), Stuttgart, Allemagne. Unavailable
Lakis, A. A., & Toorani, M. (2012, May). Dynamic analysis of composite shell structures subjected to fluid forces [Paper]. 1st International Conference on Composites Dynamics, Arcachon, France. Unavailable
Lakis, A. A., Toorani, M., Kerboua, Y., Esmailzadeh, M., & Sabri, F. (2012, July). Dynamic analysis of fluid-shell structures [Paper]. 15th International Conference on Experimental Mechanics, Porto, Portugal. Unavailable
Lalonde, V. (2012). Mesure de la puissance d'usure d'un tube de générateur de vapeur de réacteur nucléaire en interaction avec une barre anti-vibration [Master's thesis, École Polytechnique de Montréal]. Available
Lebel, F. (2012). Contrôle de la fabrication des composites par injection sur renforts [Ph.D. thesis, École Polytechnique de Montréal]. Available
Lebel, F., Fanaei, A., Ruiz, E., & Trochu, F. (2012). Experimental characterization by fluorescence of capillary flows in the fiber tows of engineering fabrics. Open Journal of Inorganic Non-Metallic Materials, 2(3), 25-45. External link
Leclaire, S., El-Hachem, M., & Reggio, M. (2012). Convolution kernel for fast CPU/GPU computation of 2D/3D isotropic gradients on a square/cubic lattice. In Katsikis, V. (ed.), MATLAB - A Fundamental Tool for Scientific Computing and Engineering Applications - Volume 3 (Vol. 3, 195-216). Available
Leclaire, S., Reggio, M., & Trépanier, J.-Y. (2012). Numerical Evaluation of Two Recoloring Operators for an Immiscible Two-Phase Flow Lattice Boltzmann Model. Applied Mathematical Modelling, 36(5), 2237-2252. External link
Leclaire, S., Trépanier, J.-Y., Reggio, M., & Malouin, B. (2012, May). Laplace Young's law and multi-layered Couette's flow in a lattice Boltzmann model [Paper]. CFD Society of Canada 20th Annual Conference, Canmore, Alberta. Unavailable
Lemieux, A. A., Bufi, R., Simon, L., Lamouri, S., & Pellerin, R. (2012, August). Mesure et pilotage de la performance de l'amont de la chaîne logistique par les outils du Lean dans l'industrie du luxe [Paper]. 9e Rencontre internationale de la recherche en logistique (RIRL 2012), Montréal, Québec. External link
Lévesque, M. (2012). Influence du stockage thermique dans la structure du bâtiment sur les systèmes de pompes à chaleur géothermiques [Master's thesis, École Polytechnique de Montréal]. Available
Lu, H. (2012). A Geometric Approach to Converting CAD Models to CAM Models: an Application on Aeronautical Structure Parts [Ph.D. thesis, École Polytechnique de Montréal]. Available
MacDonald, F., Jost, R., Beausoleil-Morrison, I., Kummert, M., McDowell, T., & Ferguson, A. (2012, August). A demonstration of the run t ime coupling between ESPr and TRNSYS [Paper]. Proceeding of SimBuild, 5th IBPSA-USA Conference, Madison, Wisconsin, USA. Unavailable
Majdouline, Y., Aubin, C.-É., Wang, X., Sangole, A., & Labelle, H. (2012). Preoperative assessment and evaluation of instrumentation strategies for the treatment of adolescent idiopathic scoliosis: computer simulation and optimization. Scoliosis and Spinal Disorders, 7(1). Available
Marouane, H. (2012). Effet de la force de compression sur la réponse passive de l'articulation du genou: une étude numérique non-linéaire [Master's thesis, École Polytechnique de Montréal]. Available
Martel, A., Arreguin-Zavala, J., Benaissa, A., Turenne, S., & Julien, B. (2012). Conventional and microwave sintering of MoSi₂ nanostructured powder : Powder and parts characterisation. Powder Metallurgy, 55(3), 206-211. External link
Mascle, C. (2012, June). Aircraft design for rebirth [Paper]. International Workshop on Green Supply Chain (GSC 2012), Arras, France. Unavailable
Mascle, C., & Deneu, F. (2012, June). Nouvelle méthode de sélection environnementale des matériaux pour la fin de vie des produits par évaluation floue en phase de conception préliminaire [Paper]. 9e Congrès international de modélisation, optimisation et simulation (MOSIM 2012), Bordeaux, France. Unavailable
Mascle, C., & Wygowski, W. (2012). Fabrication avancée et méthodes industrielles : du dossier produit au dossier fabrication, tome 2. External link
Mascle, C., & Wygowski, W. (2012). Fabrication avancée et méthodes industrielles : du dossier produit au dossier fabrication, tome I. External link
Mayer, J. R. R. (2012). Five-axis machine tool calibration by probing a scale enriched reconfigurable uncalibrated master balls artefact. CIRP Annals - Manufacturing Technology, 61(1), 515-518. External link
Mbeh, D. A., Franca, R., Merhi, Y., Zhang, X. F., Veres, T., Sacher, E., & Yahia, L. (2012). In Vitro Biocompatibility Assessment of Functionalized Magnetite Nanoparticles: Biological and Cytotoxicological Effects. Journal of Biomedical Materials Research: Part A, 100A(6), 1637-1646. External link
Melot, M., Trépanier, J.-Y., Camarero, R., & Petro, E. (2012). Comparison of numerical models in radiative heat transfer with application to circuit-breaker simulations. Mathematics and Computers in Simulation, 82(12), 2982-2996. External link
Menard, A. L., Valteau, B., Londono, I., Moldovan, F., Grimard, G., & Villemure, I. (2012, July). Influence of Dynamic Loading Parameters on Bone Growth Modulation [Abstract]. 9th Biennial Meeting of the International Research Society of Spinal Deformities (IRSSD 2012), Poznan, Poland. External link
Miao, H. Y., & Lévesque, M. (2012, November). Shot peening for fatigue life improvement and forming of aerospace structures [Paper]. Research and Innovation for Transport Systems of the Future (RITF 2012), Paris, France. Unavailable
Miron, P. (2012). Adaptation anisotrope sur des structures lagrangiennes cohérentes en mécanique des fluides [Master's thesis, École Polytechnique de Montréal]. Available
Miron, P., Vétel, J., Garon, A., Delfour, M., & Hassan, M. E. (2012). Anisotropic mesh adaptation on Lagrangian Coherent Structures. Journal of Computational Physics, 231(19), 6419-6437. External link
Mohebbi-Kalhori, D., Rukhlova, M., Ajji, A., Bureau, M., & Moreno, M. J. (2012). A Novel Automated Cell-Seeding Device for Tissue Engineering of Tubular Scaffolds: Design and Functional Validation. Journal of Tissue Engineering and Regenerative Medicine, 6(9), 710-720. External link
Mokhtarzadeh, H., Farahmand, F., Shirazi-Adl, A., Arjmand, N., Malekipour, F., & Parnianpour, M. (2012). The Effects of Intra-Abdominal Pressure on the Stability and Unloading of the Spine. Journal of Mechanics in Medicine and Biology, 12(1). External link
Moldovan, F., Villemure, I., Fendri, K., Grimard, G., Zaouter, C., Parent, S., Moreau, A., Labelle, H., & Patten, S. A. (2012, July). Adolescent idiopathic scoliosis (AIS) : metabolic factors, biomechanical stress and estrogen impact [Paper]. 9th Biannual Scientific Meeting of International research Society of spinal deformities, Poznan, Poland. Unavailable
Moldovan, F., Villemure, I., Zaouter, C., Grimard, G., Parent, S., & Patten, K. S. (2012). Biomechanical Stress and Estrogen Impact on Human Osteoblasts. Osteoarthritis and Cartilage, 20, S116-S116. External link
Montagnon, E., Hissoiny, S., Despres, P., & Cloutier, G. (2012, July). Real-time processing in dynamic ultrasound elastography: a GPU-based implementation using CUDA [Paper]. 2012 11th International Conference on Information Sciences, Signal Processing and their Applications (ISSPA), Piscataway, NJ, USA. External link
Mortada, M.-A., Carroll, T. I.I.I., Yacout, S., & Lakis, A. A. (2012). Rogue components: Their effect and control using logical analysis of data. Journal of Intelligent Manufacturing, 23(2), 289-302. External link
Motaghinasab, S., Shirazi-Adl, A., Urban, J. P. G., & Parnianpour, M. (2012, February). Computational pharmacokinetics of antibiotics transport in the human intervertebral disc [Paper]. 58th Annual Meeting of the Orthopaedic Research Society, San Francisco, Californie. External link
Motaghinasab, S., Shirazi-Adl, A., Urban, J. P. G., & Parnianpour, M. (2012). Computational pharmacokinetics of solute penetration into human intervertebral discs-Effects of endplate permeability, solute molecular weight and disc size. Journal of Biomechanics, 45(13), 2195-2202. External link
Mouret, L. (2012). Analyse des déformations résiduelles dans des pièces composites fortement courbées fabriquées par RTM [Master's thesis, École Polytechnique de Montréal]. Available
Nafi, A., Mayer, J. R. R., & Wozniak, A. (2012). Reduced Configuration Set for the Multi-Step Method Applied to Machine and Probe Error Separation on a CMM. Measurement: Journal of the International Measurement Confederation, 45(10), 2321-2329. External link
Ndiaye, D., & Bernier, M. (2012). Transient Model of a Geothermal Heat Pump in Cycling Conditions - Part A : the Model. International Journal of Refrigeration, 35(8), 2110-2123. External link
Ndiaye, D., & Bernier, M. (2012). Transient Model of a Geothermal Heat Pump in Cycling Conditions - Part B : Experimental Validation and Results. International Journal of Refrigeration, 35(8), 2124-2137. External link
Oulmane, A., Lakis, A. A., & Mureithi, N. W. (2012, July). Automatic classification of rotating machinery faults using Fourier descriptors and neural networks [Paper]. 15th International Conference on Experimental Mechanics, Porto, Portugal. Unavailable
Palardy, G., Hubert, P., Ruiz, E., Haider, M., & Lessard, L. (2012). Numerical Simulations for Class A Surface Finish in Resin Transfer Moulding Process. Composites Part B: Engineering, 43(2), 819-824. External link
Paquet, D., Lanteigne, J., & Bernard, M. (2012). A new experimental method for the introduction of a predetermined amount of residual stresses in fatigue test specimens. Journal of Applied Mechanics, Transactions ASME, 79(6). External link
Paraschivoiu, I., & Dy, N. V. (2012, June). A numerical study of darrieus water turbine [Paper]. 22nd International Offshore and Polar Engineering Conference (ISOPE 2012), Rhodes, Greece. External link
Pasha, S., Aubin, C.-É., Labelle, H., Parent, S., & Mac-Thiong, J.-M. (2012, July). Biomechanical Analysis of Spino-Pelvic Parameters in Adolescent Idiopathic Scoliosis After Spinal Instrumentation and Fusion: a Case Study. [Paper]. 9th Biennial Meeting of the International Research Society of Spinal Deformities (IRSSD 2012), Poznan, Poland. External link
Périé-Curnier, D. (2012). Quantitative MRI for scoliosis follow-up. In Recent advances in scoliosis (85-102). External link
Perrault, F. D., Aubin, C.-É., Wang, X., & Schwend, R. M. (2012, July). Biomechanical Analysis of Forces Sustained by Iliac Screws in Spinal Instrumentation for Deformity Treatment: Preliminary Results. [Paper]. 9th Biennial Meeting of the International Research Society of Spinal Deformities (IRSSD 2012), Poznan, Poland. External link
Perrault, F. D., Wang, X., Schwend, R. M., & Aubin, C.-É. (2012, May). Analyse biomécanique d'instrumentations étendues du rachis scoliotique avec vis iliaques: Résultats préliminaires [Paper]. 27e Congrès de recherche des étudiants gradués du Centre de Recherche du CHU Sainte-Justine, Montréal, Québec, Canada. Unavailable
Perreault, F. D., Aubin, C.-É., Wang, X., & Schwend, R. M. (2012, October). Analyse biomécanique de montage avec vis iliaques dans le traitement de longues déformations: résultats préliminaires [Paper]. 42e Réunion annuelle de la Société de scoliose du Québec, Sherbrooke, QC. Unavailable
Pineda, U., Montés, N., Sánchez, F., Bensadoun, F., & Ruiz, E. (2012, June). Experimental analysis by thermography and conductive heat flux sensors of the curing stage of composite parts made by resin infusion (RI) [Paper]. 15th European Conference on Composite Materials (ECCM-15), Venise, Italie. External link
Pineda, U., Montés, N., Sánchez, F., Bensadoun, F., & Ruiz, E. (2012, June). In-situ calibration experimental method for infrared thermography applied to the heat transfer analysis for composite parts during manufacturing based on resin infusion technique [Paper]. 11th Quantitative InfraRed Thermography (QIRT 2012), Naples, Italie. External link
Plourde, F., Cheriet, F., & Dansereau, J. (2012). Semiautomatic Detection of Scoliotic Rib Borders From Posteroanterior Chest Radiographs. IEEE Transactions on Biomedical Engineering, 59(4), 909-919. External link
Qasaimeh, A., Elektorowicx, M., & Balazinski, M. (2012). GA-Fuzzy decision support system for mercury removal in natural waters. Computational Water, Energy and Environmental Engineering, 1(1), 1-7. External link
Rabezandriny, H. (2012). Prédiction du décrochage tournant dans les compresseurs axiaux multi-étagés [Master's thesis, École Polytechnique de Montréal]. Available
Raison, M. (2012). Portable and clinical tool for dynamic quantification of the muscles forces performed by the human body. (Patent no. US8163638). External link
Raison, M., Ballaz, L., Detrembleur, C., Mahaudens, P., Lebleu, J., Fisette, P., & Mousny, M. (2012, July). Lombo-Sacral Joint Efforts During Gait: Comparison Between Healthy and Scoliotic Subjects [Paper]. 9th Biennial Meeting of the International Research Society of Spinal Deformities (IRSSD 2012), Poznan, Poland. External link
Raison, M., Laitenberger, M., Sarcher, A., Detrembleur, C., Samin, J.-C., & Fisette, P. (2012). Methodology for the assessment of joint efforts during sit to stand movement. In Goswami, T. (ed.), Injury and skeletal biomechanics (135-152). External link
Ramzi, R. (2012). Comportement dynamique non linéaire des coques cylindriques anisotropiques non uniformes soumises à un écoulement supersonique [Ph.D. thesis, École Polytechnique de Montréal]. Available
Rancourt-Ouimet, M. (2012). Performances d'un champ de puits géothermiques verticaux peu profonds en boucle fermée [Master's thesis, École Polytechnique de Montréal]. Available
Raymond, V. (2012). Metal Injection Molding Development: Modeling and Numerical Simulation of Injection with Experimental Validation [Master's thesis, École Polytechnique de Montréal]. Available
Recuerda, M., Périé-Curnier, D., Gilbert, G., & Beaudoin, G. (2012). Assessment of mechanical properties of isolated bovine intervertebral discs from multi-parametric magnetic resonance imaging. BMC Musculoskeletal Disorders, 13. Available
Recuerda, M., Périé-Curnier, D., Gilbert, G., & Beaudoin, G. (2012). Assessment of mechanical properties of isolated bovine intervertebral discs from multi-parametric Magnetic Resonance Imaging. BMC Musculoskeletal Disorders, 13(1), 195-195. External link
Reitmaier, S., Shirazi-Adl, A., Bashkuev, A., Gloria, M., Wilke, A., Schmidt, H.-J., & Schmidt, H. (2012, July). Intervertebral disc nucleus replacements: combined experimental and in silico studies [Paper]. 18th Congress of the European Society of Biomechanics (ESB 2012), Lisbon, Portugal. Published in Journal of Biomechanics, 45(Suppl. 1). External link
Reitmaier, S., Shirazi-Adl, A., Bashkuev, M., Wilke, H.-J., Gloria, A., & Schmidt, H. (2012). In Vitro and in Silico Investigations of Disc Nucleus Replacement. Journal of the Royal Society Interface, 9(73), 1869-1879. External link
Ren, Q. (2012). Type-2 Takagi-Sugeno-Kang Fuzzy Logic System and Uncertainty in Machining [Ph.D. thesis, École Polytechnique de Montréal]. Available
Ren, Q. U. N., Baron, L., & Balazinski, M. (2012). Fuzzy Identification of Cutting Acoustic Emission With Extended Subtractive Cluster Analysis. Nonlinear Dynamics, 67(4), 2599-2608. External link
Ren, Q., Balazinski, M., & Baron, L. (2012). High-order interval type-2 Takagi-Sugeno-Kang fuzzy logic system and its application in acoustic emission signal modeling in turning process. International Journal of Advanced Manufacturing Technology, 63(9-12), 1057-1063. External link
Rigaud, M., Harmuth, H., & Zhou, N. S. (2012, October). For an educational and industrial partnership in a coopetitive world: FIRE [Paper]. 6th International Symposium on Refractories, Zhengzhou, Chine. Unavailable
Robert, A., & Kummert, M. (2012). Designing net-zero energy buildings for the future climate, not for the past. Building and Environment, 55, 150-158. External link
Rouzmeh, S. (2012). Improvement deburring consistency of fuel nozzle parts [Master's thesis, École Polytechnique de Montréal]. Available
Rouzmeh, S., Hoang, C., & Balazinski, M. (2012, May). Experimental study of the drilling burr formation in nickel alloy, Inconel 625 [Paper]. 1st International Conference on Virtual Machining Process Technology (VMPT 2012), Montréal, Québec. Unavailable
Ruiz, E. (2012, July). Technology transfer in Canada: closing the gap between science and volume production [Paper]. 11th International Conference on Flow Processes in Composite Materials (FPCM 2011), Auckland, New Zealand. External link
Ruiz, E., Lebel, F., & Trochu, F. (2012, July). Experimental study of capillary flows, voids formation and void migration in LCM Manufacturing [Paper]. 11th International Conference on Flow Processes in Composite Materials (FPCM 2011), Auckland, New Zealand. External link
Sabri, F., & Lakis, A. A. (2012, July). Aeroelastic analysis of truncated conical shell subjected to supersonic flow [Paper]. 15th International Conference on Experimental Mechanics (ICEM 2012), Porto, Portugal. Unavailable
Sabri, F., Meguid, S. A., & Lakis, A. A. (2012, April). Modeling flutter response of a flexible morphing wing for UAV [Paper]. 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Honolulu, HI, USA. External link
Sagol, E., Reggio, M., & Ilinca, A. (2012). Assessment of Two-Equation Turbulence Models and Validation of the Performance Characteristics of an Experimental Wind Turbine by CFD. ISRN Mechanical Engineering, 10-10. External link
Sainte-Beuve, D. (2012). Évaluation de différentes stratégies de démantèlement de la carcasse d'un avion [Master's thesis, École Polytechnique de Montréal]. Available
Salimshirazi, A. (2012). Transient Heat Transfer in Vertical Ground Heat Exchangers [Ph.D. thesis, École Polytechnique de Montréal]. Available
Sawadogo, T. (2012). Modélisation de l'instabilité fluidélastique d'un faisceau de tubes soumis à un écoulement diphasique transverse [Ph.D. thesis, École Polytechnique de Montréal]. Available
Scholz, O. (2012). Une entrée d'air optimisée avec débit moteur ajusté sous la contrainte d'ingestion de couche limite [Master's thesis, École Polytechnique de Montréal]. Available
Sevrain, A., Aubin, C.-É., Gharbi, H., Wang, X., & Labelle, H. (2012). Biomechanical evaluation of predictive parameters of progression in adolescent isthmic spondylolisthesis: a computer modeling and simulation study. Scoliosis and Spinal Disorders, 7, 2 (9 pages). Available
Slamani, M., Mayer, J. R. R., Balazinski, M., Carrier, B., & Engin, S. (2012). Improvement to High-Speed End Mill Boring Accuracy by a Simple Compensation Strategy. Machining Science and Technology, 16(1), 1-19. External link
Song, Z., Howard, T. J., Achiche, S., & Ali, O. (2012, August). Kansei engineering and web site design [Paper]. ASME 2012 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC/CIE 2012), Chicago, Illinois, USA. External link
Sosa, J. B., Urquiza, G., Garcia, J. C., Castro, L., & Reggio, M. (2012). Optimization of the impeller and diffuser of hydraulic submersible pump using computational fluid dynamics and artificial neural networks. In Logistic management and optimization through hybrid artificial intelligent systems . External link
St-Jacques, P. (2012). Automatisation des opérations de masquage pour la projection au plasma de revêtements thermiques sur des composants de moteurs d'aéronefs [Master's thesis, École Polytechnique de Montréal]. Available
Stip, E., Lungu, O. V., Anselmo, K., Letourneau, G., Mendrek, A., Stip, B., Lipp, O., Lalonde, P., & Bentaleb, L. A. (2012). Neural changes associated with appetite information processing in schizophrenic patients after 16 weeks of olanzapine treatment. Translational Psychiatry, 2(6). Available
Tabet, R. (2012). Ajustement automatique des paramètres de coupe pour l'obtention de stabilité dynamique en usinage [Master's thesis, École Polytechnique de Montréal]. Available
Tajeddini, V., Lin, C.-H., Muliana, A., & Lévesque, M. (2012, November). The effect of microstructural morphologies on the effective electromechanical properties of piezoelectric particle composites [Paper]. ASME International Mechanical Engineering Congress and Exposition (IMECE 2012), Houston, TX, United states. External link
Therriault, D., Lewis, J. A., & White, S. R. (2012). Microcapillary networks. (Patent no. US8101139). External link
Toche, B., Pellerin, R., Fortin, C., & Huet, G. (2012, July). Set-based prototyping with digital mock-up technologies [Paper]. 9th IFIP WG 5.1 International Conference on Product Lifecycle Management (PLM 2012), Montréal, Québec. External link
Torry Smith, J. M., Qamar, A., Achiche, S., Wikander, J., Mortensenand, N. H., & During, C. (2012). Challenges in designing mechatronic systems. Journal of Mechanical Design, 135(1), 11-11. External link
Trudel-Boucher, D., Esquirol, A.-L., & Bureau, M. (2012, May). Influence of cooling rates on microstructure and mechanical performance of continuous fiber reinforced PPS composites [Paper]. SAMPE International Symposium and Exhibition - Emerging Opportunities: Materials and Process Solutions. External link
Vasilevskiy, D., Masut, R. A., & Turenne, S. (2011, July). Thermoelectric and Mechanical Properties of Novel Hot-Extruded PbTe n-Type Material [Paper]. 30th International Conference on Thermoelectrics (ICT 2011), Traverse City, Michigan, USA. Published in Journal of Electronic Materials, 41(6). External link
Versailles, P., Chishty, W. A., & Vo, H. D. (2012). Application of Dielectric Barrier Discharge to Improve the Flashback Limit of a Lean Premixed Dump Combustor. Journal of Engineering for Gas Turbines and Power, 134(3), 8-8. External link
Villalpando, F., Reggio, M., & Ilinca, A. (2012). Numerical Study of Flow Around Iced Wind Turbine Airfoil. Engineering Applications of Computational Fluid Mechanics, 6(1), 39-45. External link
Vo, H. D. (2012). Apparatus and method for controlling a compressor. (Patent no. US8096756). External link
Wagnac, E., Arnoux, P.-J., Garo, A., & Aubin, C.-É. (2012). Finite element analysis of the influence of loading rate on a model of the full lumbar spine under dynamic loading conditions. Medical and Biological Engineering and Computing, 50(9), 903-915. External link
Wane, B. A., Urquiza, J. M., Fortin, A., & Pelletier, D. (2012). Hierarchical elements for the iterative solving of turbulent flow problems on anisotropic meshes. European Journal of Computational Mechanics, 21(1-2), 22-39. External link
Wang, X., Aubin, C.-É., Coleman, J., & Rawlinson, J. (2012). Biomechanical Performance of Sagittal Adjusting Screws (SAS) - Phase 1. (Technical Report). Unavailable
Wang, X., Aubin, C.-É., Crandall, D., Parent, S., & Labelle, H. (2012). Biomechanical Analysis of 4 Types of Pedicle Screws for Scoliotic Spine Instrumentation. Spine, 37(14), E823-E835. External link
Wang, X., Aubin, C.-É., Labelle, H., Parent, S., & Crandall, D. (2012). Biomechanical Analysis of Corrective Forces in Spinal Instrumentation for Scoliosis Treatment. Spine, 37(24), E1479-E1487. External link
Wang, X., Aubin, C.-É., Larson, A. N., Labelle, H., & Parent, S. (2012, July). Biomechanical Analysis of Pedicle Screw Density in Spinal Instrumentation for Scoliosis Treatment: First Results. [Paper]. 9th Biennial Meeting of the International Research Society of Spinal Deformities (IRSSD 2012), Poznan, Poland. External link
Wang, X., Aubin, C.-É., Robitaille, I., & Labelle, H. (2012). Biomechanical Comparison of Alternative Densities of Pedicle Screws for the Treatment of Adolescent Idiopathic Scoliosis. European Spine Journal, 21(6), 1082-1090. External link
Weil Brenner, M. (2012). Conception préliminaire et optimisation multidisciplinaire d'avion à fuselage intégré [Master's thesis, École Polytechnique de Montréal]. Available
Wosu, R., Sergerie, K., Lévesque, M., & Villemure, I. (2012). Mechanical properties of the porcine growth plate vary with developmental stage. Biomechanics and Modeling in Mechanobiology, 11(3-4), 303-312. External link
Wozniak, A., & Mayer, J. R. R. (2012). A Robust Method for Probe Tip Radius Correction in Coordinate Metrology. Measurement Science & Technology, 23(2), 8 pages. External link
Yazji, M., Raison, M., Mahaudens, P., Detrembleur, C., Aubin, C.-É., Labelle, H., & Mousny, M. (2012, October). Comparison of the lower limb joint efforts during gait between healthy subjects and scoliotic patients with different scoliosis severities [Paper]. 42e réunion annuelle de la Société de Scoliose du Québec, Sherbrooke, Québec. Unavailable
Younsi, R. (ed.) (2012). Navier-Stokes equations : properties, description, and applications. Unavailable
Zhang, L. J., Zhang, L., Marchand, L., & Pierre, S. (2012). Integrated network architecture design for wireless systems. In Makaya, C., & Pierre, S. (eds.), Emerging wireless networks: concepts, techniques, and applications (107-150). External link
Zhang, W., Aliyu, M. D. S., Liu, Y.-G., & Xie, X.-J. (2012). Stochastic systems: Modeling, analysis, synthesis, control, and their applications to engineering. Mathematical Problems in Engineering, 2012. External link
Zhang, X. F., Mansouri, S., Clime, L., Ly, H. Q., Yahia, L., & Veres, T. (2012). Fe₃O₄-Silica Core-Shell Nanoporous Particles for High-Capacity Ph-Triggered Drug Delivery. Journal of Materials Chemistry, 22(29), 14450-14457. External link
Zhang, X. F., Mansouri, S., Mbeh, D. A., Yahia, L., Sacher, E., & Veres, T. (2012). Nitric oxide delivery by core/shell superparamagnetic nanoparticle vehicles with enhanced biocompatibility. Langmuir, 28(35), 12879-12885. External link
Zheng, J., Xie, W.-F., Viens, M., Birglen, L., & Mantegh, I. (2012, July). Design of advanced automatic inspection system for turbine blade FPI analysis [Paper]. 39th Annual Review of Progress in Quantitative Nondestructive Evaluation, Denver, Colorado, USA. External link
Zhim, F., Ayers, R. A., Moore, J. J., Moufarrege, R., & Yahia, L. (2012). Personalized Implant for High Tibial Opening Wedge: Combination of Solid Freeform Fabrication With Combustion Synthesis Process. Journal of Biomaterials Applications, 27(3), 323-332. External link
Zouari, G. (2012). Processus de vérification et de validation des analyses mécaniques des roues de turbines hydrauliques avec CODE-ASTER [Master's thesis, École Polytechnique de Montréal]. Available
