<  Back to the Polytechnique Montréal portal

Items where Division is "Department of Mechanical Engineering"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors | Document subtype | No Grouping
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | R | S | T | V | W | Y | Z
Number of items: 199.

A

Abanto, J., Pelletier, D., Garon, A., Trépanier, J.-Y., & Reggio, M. (2005, January). Verification of some commercial CFD codes on atypical CFD problems [Paper]. 43rd AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV, United States. External link

Achiche, S. (2005). Automatisation du processus de construction des structures de données floues [Ph.D. thesis, École Polytechnique de Montréal]. Available

Achiche, S., Baron, L., Balazinski, M., & Benaoudia, M. (2005, February). Chips image processing to predict pulp brightness using fuzzy logic techniques [Paper]. 91st Annual Meeting of the Pulp and Paper Technical Association of Canada (PAPTAC 2005). Unavailable

Alloui, Z., Nguyen, T. H., & Bilgen, E. (2005). Bioconvection of gravitactic microorganisms in a vertical cylinder. International Communications in Heat and Mass Transfer, 32(6), 739-747. External link

Ariyasu, K., Kang, I., Hara, I., Hayashi, T., & Paraschivoiu, I. (2005, March). Characteristic measurements of the straight-bladed vertical axis wind turbine in periodically varying wind [Paper]. 43rd General Meeting and Lecture Meeting of Chugoki-Shikoku Branch of JSME, Ehime, Japan. External link

Arjmand, N., & Shirazi-Adl, A. (2005). Biomechanics of Changes in Lumbar Posture in Static Lifting. Spine, 30(23), 2637-2648. External link

Assaf, B., Menge, H., Sobotka, V., & Trochu, F. (2005). Development of a characterization mold to measure the transverse thermal conductivity of a composite material by inverse analysis. Journal of Reinforced Plastics and Composites, 24(17), 1837-1854. External link

Atabaki, N., & Bernier, M. (2005, February). A semi-empirical model for residential electric hot water tanks [Paper]. 2005 annual meeting of the American Society for Heating, Refrigerating and Air-Conditioning Engineers, Orlando, FL. Published in ASHRAE transactions, 111(1). Unavailable

Auclair-Daigle, C., Bureau, M. N., Legoux, J. G., & Yahia, L. (2005). Bioactive Hydroxyapatite Coatings on Polymer Composites for Orthopedic Implants. Journal of Biomedical Materials Research. Part A, 73A(4), 398-408. External link

B

Bahloul, A., Nguyen, T. H., & Nguyen, T. H. (2005). Bioconvection of Gravitactic Microorganisms in a Fluid Layer. International Communications in Heat and Mass Transfer, 32(1-2), 64-71. External link

Bailon, J.-P., Clément, B., & Lafleur, P. (2005, June). Same course, two methods of learning: Assessment of the student's success [Paper]. ASEE Annual Conference and Exposition, Pittsburgh, PA, United states. External link

Balazinski, M., & Przybylo, A. (2005). Teaching Manufacturing Processes Using Computer Animation. Journal of Manufacturing Systems, 24(3), 237-243. External link

Balazinski, M., & Przybylo, A. (2023, June). Teaching manufacturing processes using computer animations [Paper]. SME/CIRP International Conference on Manufacturing Engineering Education, San Luis Obispo, Californie. Unavailable

Barrero, D., Abanto, J., Hardy, J.-P., & Reggio, M. (2005, January). Serious color fluid dynamics in fire simulation [Paper]. 43rd AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV, United States. External link

Barrero, D., Petro, E., Abanto, J., & Reggio, M. (2005, August). Airflow modelling and fire smoke propagation in the new École Polytechnique building [Paper]. 9th international IBPSA conference : building simulation 2005, Montréal, Québec. External link

Bellavigna-Laoux, O., & Gou, M. (2005, June). Evaluation of commercial vehicles pre-trip inspections conducted in Québec [Paper]. XV conférence Canadienne multidisciplinaire sur la sécurité routière (CCMSR XV), Frédéricton, Nouveau-Brunswick. Unavailable

Bellemare, S. C., Dickson, J. I., Bureau, M. N., & Denault, J. (2005). Bulk Fatigue Damage Evolution in Polyamide-6 and in a Polyamide-6 Nanocomposite. Polymer Composites, 26(5), 636-646. External link

Ben Daly, H., Ben Brahim, H., Hfaeid, N., Harchay, M., & Boukhili, R. (2005, August). Caractérisation expérimentale des profils d'humidité à travers l'épaisseur des composites vieillis [Paper]. 17e Congrès français de mécanique, Troyes, France. Unavailable

Bernier, F., Boilard, P., Bailon, J.-P., & L'Espérance, G. (2005, June). Machinability and dynamic properties of sinter-hardened steel parts [Paper]. 2005 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2005, Montréal, Québec. Unavailable

Bernier, M., & Halle, S. (2005). A Critical Look at the Air Infiltration Term in the Canadian Energy Rating Procedure for Windows. Energy and Buildings, 37(10), 997-1006. External link

Bernier, M., Ladang, O., & Hulot, J. (2005, May). Effet du choix du fluide caloporteur sur l'énergie de pompage des systèmes de pompes à chaleur géothermiques [Paper]. VIIe colloque Franco-Québécois sur la thermique des systèmes, Université de Rennes. Unavailable

Biaou, A. L., & Bernier, M. (2005, August). Domestic hot water heating in zero net energy homes [Paper]. 9th international IBPSA conference : building simulation 2005, Montréal, Québec. External link

Bilgen, E. (2005). Natural Convection in Cavities With a Thin Fin on the Hot Wall. International Journal of Heat and Mass Transfer, 48(17), 3493-3505. External link

Bilgen, E., & Oztop, H. (2005). Natural Convection Heat Transfer in Partially Open Inclined Square Cavities. International Journal of Heat and Mass Transfer, 48(8), 1470-1479. External link

Bilgen, E., & Rheault, J. (2005). Solar Chimney Power Plants for High Latitudes. Solar Energy, 79(5), 449-458. External link

Birglen, L., & Gosselin, C. M. (2005, April). Fuzzy Enhanced Control of an Underactuated Finger Using Tactile and Position Sensors [Paper]. IEEE International Conference on Robotics and Automation (ICRA 2005), Barcelona, Spain. External link

Boukas, E.-K. (2005, July). Delay-dependent robust stabilizability of singular linear systems with delays [Paper]. IEEE International Conference on Mechatronics and Automation, ICMA 2005, Niagara Falls, ON, Canada. External link

Boukas, E.-K. (2005). On Robust Stability of Singular Systems With Random Abrupt Changes. Nonlinear Analysis-Theory Methods & Applications, 63(3), 301-310. External link

Boukas, E.-K. (2005). Robust H Infinity Stabilization of Stochastic Hybrid Systems With Wiener Process. Journal of Optimization Theory and Applications, 126(1), 63-84. External link

Boukas, E.-K. (2005). Robust Hᵢₙfᵢₙᵢₜy constant gain feedback stabilization of stochastic systems. IMA Journal of Mathematical Control and Information, 22(3), 334-349. External link

Boukas, E.-K. (2005). Stabilization of Stochastic Nonlinear Hybrid Systems. International Journal of Innovative Computing Information and Control, 1(1), 131-141. External link

Boukas, E.-K. (2005, July). Static output feedback control for linear descriptor systems: LMI approach [Paper]. IEEE International Conference on Mechatronics and Automation, ICMA 2005, Niagara Falls, ON, Canada. External link

Boukas, E.-K., Xu, S., & Lam, J. (2005). On Stability and Stabilizability of Singular Stochastic Systems With Delays. Journal of Optimization Theory and Applications, 127(2), 249-262. External link

Bourgeois, F. (2005). Étude statistique de profils de corrosion appliquée à l'inspection non-destructive de conduites métalliques [Master's thesis, École Polytechnique de Montréal]. Available

Briones, L. R. (2005). Injection flexible dans moule isotherme : conception et analyse d'un nouveau procédé de fabrication de composites [Master's thesis, École Polytechnique de Montréal]. Available

C

Carrier, J., Aubin, C.-É., Trochu, F., & Labelle, H. (2005). Optimization of rib surgery parameters for the correction of scoliotic deformities using approximation models. Journal of Biomechanical Engineering, 127(4), 680-691. External link

Causse, P. (2005). Modélisation et prédiction du comportement en fluage du polyéthylène haute densité [Master's thesis, École Polytechnique de Montréal]. Available

Chaib, Z., Daidié, A., Guillot, J., & Vadean, A. (2005, November). Study of a bolted and screwed fixation of a slewing bearing [Paper]. 4th International Conference Integrated Design and Production, Casablanca, Maroc. Unavailable

Chambon, R., Varin, É., & Rozon, D. (2023, June). CANDU fuel management optimization using generalized perturbation theory in the donjon diffusion code [Paper]. CNS 2005 Annuel Conference, Toronto. Unavailable

Chardavoine, F., Ageneau, S., & Ozell, B. (2005). Wolverine: a Distributed Scene-Graph Library. Presence, 14(1), 20-30. External link

Charlebois, K. M., Boukhili, R., Zebdi, O., Trochu, F., & Gasmi, A. (2005). Evaluation of the physical and mechanical properties of braided fabrics and their composites. Journal of Reinforced Plastics and Composites, 24(14), 1539-1554. External link

Chellat, F., Grandjean-Laquerriere, A., Le Naour, R., Fernandes, J., Yahia, L., Guenounou, M., & Laurent-Maquin, D. (2005). Metalloproteinase and cytokine production by THP-1 macrophages following exposure to chitosan-DNA nanoparticles. Biomaterials, 26(9), 961-970. External link

Chellat, F., Merhi, Y., Moreau, A., & Yahia, L. (2005). Therapeutic potential of nanoparticulate systems for macrophage targeting. Biomaterials, 26(35), 7260-7275. External link

Chipman, M., Lebovic, G., Persaud, B., Bhim, R., Gou, M., & Dufort, J. (2005, October). Vehicle size and risk of side-impact collisions : a case-control study in Toronto and Montréal [Paper]. Traffic Safety on 4 Continents Conference, Warsaw, Pologne. External link

Colin, E., Étienne, S., Pelletier, D., & Borggaard, J. (2005). Application of a Sensitivity Equation Method to Turbulent Flows With Heat Transfer. International Journal of Thermal Sciences, 44(11), 1024-1038. External link

Colin, E., Étienne, S., Pelletier, D., & Borggaard, J. (2005, January). Application of a sensivity equation method to turbulent conjugate heat transfer [Paper]. 43rd AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV, United States. External link

Croteau, D. (2005). Simulation numérique du procédé de déposition chimique en phase vapeur assistée par laser (LCVD) de fibres de carbone [Master's thesis, École Polytechnique de Montréal]. Available

D

Dahmani, M., Le Tellier, R., Roy, R., & Hébert, A. (2005). An Efficient Preconditioning Technique Using Krylov Subspace Methods for 3D Characteristics Solvers. Annals of Nuclear Energy, 32(8), 876-896. External link

Degan, G., Vasseur, P., & Awanou, N. C. (2005). Anisotropy Effects on Non-Darcy Natural Convection From Concentrated Heat Sources in Porous Media. Acta Mechanica, 179(1-2), 111-124. External link

Delfour, M. C., Garon, A., & Longo, V. (2005). Modeling and Design of Coated Stents to Optimize the Effect of the Dose. SIAM Journal on Applied Mathematics, 65(3), 858-881. External link

Diany, M., Bouzid, A.-H., & Derenne, M. (2005, July). On the Validity and Limits of the Gasket Effective Width Concept [Paper]. ASME Pressure Vessels and Piping Conference (PVP 2005), Denver, Colorado, USA. External link

Douche, Y. (2005). Étude de la résistance à l'impact mécanique des bétons réfractaires aluminosiliceux [Master's thesis, École Polytechnique de Montréal]. Available

Duke, K., Aubin, C.-É., Dansereau, J., & Labelle, H. (2005). Biomechanical simulations of scoliotic spine correction due to prone position and anaesthesia prior to surgical instrumentation. Clinical Biomechanics, 20(9), 923-931. External link

Dupont, Y. (2005). Étalonnage d'un axe prosmatique numérique par interférométrie laser [Master's thesis, École Polytechnique de Montréal]. Available

Duvigneau, R., & Pelletier, D. (2005, January). Evaluation of nearby flows by a shape sensitivity equation method [Paper]. 43rd AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV, United States. External link

Duvigneau, R., Pelletier, D., & Borggaard, J. (2005, January). On the accuracy of shape parameter boundary conditions in the sensitivity equation method [Paper]. 43rd AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV, United States. Unavailable

Duvigneau, R., Pelletier, D., & Borggaard, J. (2005, June). Optimal design in mixed convection using and improved continuous sensitivity equation method [Paper]. 38th AIAA Thermophysics Conference, Toronto, On.. External link

Duvigneau, R., Pelletier, D., & Borggaard, J. (2005, June). A SEM for shape optimization of thermal systems [Paper]. 38th AIAA Thermophysics Conference, Toronto, On.. Unavailable

E

Eca, L., Hoekstra, M., Hay, A., & Pelletier, D. (2005). A manufactured solution for a two-dimensional steady wall-bounded incompressible turbulent flow. (Technical Report n° EPM-RT-2005-08). Available

Edmond, P., Pelletier, D., Étienne, S., & Borggaard, J. (2005, June). A sensitivity equation method for compressible subsonic laminar airfoil flows [Paper]. 23rd AIAA Applied Aerodynamics Conference, Toronto, ON, Canada. External link

Ekinci, T. O. (2005). Analyse des effets thermiques, élastiques et géométriques sur les écarts cinématiques articulaires d'un guidage de MMT [Master's thesis, École Polytechnique de Montréal]. Available

Ekinci, T. O., Mayer, J. R. R., & Cloutier, G. (2023, May). Thermal Distortion Modeling on CMM Structures [Paper]. 20th Canadian Congress of Applied Mechanics, Montréal, Québec. Unavailable

El-Rich, M. (2005). Modélisation de la colonne vertébrale thoraco-lombaire humaine en position neutre debout : distribution des charges et analyses de stabilité [Ph.D. thesis, École Polytechnique de Montréal]. Unavailable

El-Rich, M., & Shirazi-Adl, A. (2005). Effect of load position on muscle forces, internal loads and stability of the human spine in upright postures. Computer Methods in Biomechanics and Biomedical Engineering, 8(6), 359-368. External link

Étienne, S., & Pelletier, D. (2005). A general approach to sensitivity analysis of fluid-structure interactions. Journal of Fluids and Structures, 21(2), 169-186. External link

Étienne, S., Pelletier, D., & Garon, A. (2005, June). Application of a sensitivity equation method to generic FSI biomedical problems [Paper]. 4th AIAA Theoretical Fluid Mechanics Meeting, Toronto, ON, Canada. External link

Étienne, S., Pelletier, D., & Garon, A. (2005, January). An updated lagrangian monolithic formulation for steady-state fluid-structure interaction problems [Paper]. 43rd AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV, United States. External link

F

Fréchette, P. (2005). Étude des phénomènes de transport dans les alliages thermoélectriques (Bi₁₋ₓSbₓ)₂(Te₁₋ySey)₃ élaborés par métallurgie des poudres [Master's thesis, École Polytechnique de Montréal]. Available

Fregeau, M., Saeed, F., & Paraschivoiu, I. (2005). Numerical heat transfer correlation for array of hot-air jets impinging on 3-dimensional concave surface. Journal of Aircraft, 42(3), 665-670. External link

G

Gabr, M. (2005). Calcul et décomposition de la traînée en régime transsonique en utilisant les équations de Navier-Stokes [Master's thesis, École Polytechnique de Montréal]. Available

Geneves, C., Wilquem, F., Treyve, F., Cloutier, G., Soulez, G., & Saidane, K. (2005). Study of non stationary mode flow of an abdominal aortic aneurysm. Journal of Applied Biomaterials and Biomechanics, 3(3), 176-183. External link

Ghafer-Zadeh, E., Sawan, M., & Therriault, D. (2005, November). Direct-write fabrication of microchannel dedicated to CMOS-based lab-on-chip applications [Paper]. ASME International Mechanical Engineering Congress and Exposition (IMECE 2005), Orlando, FL. External link

H

Haider, M., Ruiz, E., Hubert, P., & Lessard, L. (2005, August). Resin cure shrinkage and LPA action characterization for class A RTM processing [Paper]. Canada composites International Conference, Vancouver, Canada. Unavailable

Halle, S., Bernier, M., & Lartigue, R. (2005). Contribution to the Study of Multicellular Flows Inside Two-Dimensional Rectangular and Pinched Insulated Glazing Cavities. HVAC and R Research, 11(1), 77-94. External link

Hébert, A. (2005, September). A review of legacy and advanced self-shielding models for lattice calculations [Paper]. International Topical Meeting on Mathematics and Computation, Supercomputing, Reactor Physics and Nuclear and Biological Applications (M&C 2005), Avignon, France. Unavailable

Hébert, A. (2005). The Ribon extended self-shielding model. Nuclear Science and Engineering, 151(1), 1-24. External link

Hébert, A., & Karthikeyan, R. (2005, May). Interfacing NJOY with advanced lattice codes [Paper]. Workshop on NJOY-2005 and User Group Meeting, Issy-les-Moulineaux, France. External link

Huo, L. (2005). A twist decomposition approach to solve functionally-redundant serial manipulators [Master's thesis, École Polytechnique de Montréal]. Available

Huo, L. G., & Baron, L. (2005). Kinematic Inversion of Functionally-Redundant Serial Manipulators: Application to Arc-Welding. Transactions of the Canadian Society for Mechanical Engineering, 29(4), 679-690. External link

Huynh, A. M., Rajwani, T. R., Aubin, C.-É., Villemure, I., & Bagnall, K. M. (2005, April). Biomechanical study of pedicle growth asymmetry as a cause of adolescent idiopathic scoliosis [Paper]. 3rd International Symposium on Advanced Biomaterials/biomechanics, Montréal, Québec. Unavailable

I

Ilinca, E., Hetu, J. F., & Pelletier, D. (2005). Design Sensitivity Analysis for the Optimization of the Injection Molding Process. International Polymer Processing, 20(1), 86-92. External link

Ilinca, F., Hetu, J.-F., & Ajersch, F. (2005, June). Numerical simulation of 3D turbulent flow and heat transfer in a continuous galvanizing bath [Paper]. 17th AIAA Computational Fluid Dynamics Conference, Toronto, ON, Canada. External link

Ilinca, F., Pelletier, D., & Borggaard, J. (2005, June). A continuous second order sensitivity equation method for time-dependent incompressible laminar flows [Paper]. 17th AIAA Computational Fluid Dynamics Conference, Toronto, On.. External link

J

Janzen, V. P., Hagberg, E. G., Pettigrew, M. J., & Taylor, C. E. (2005). Fluidelastic instability and work-rate measurements of steam generator U-Tubes in Air-Water Cross-Flow. Journal of Pressure Vessel Technology, 127(1), 84-91. External link

Jasmin, S., & Prud'homme, M. (2005, May). Détermination d'une source de chaleur biochimique en milieu poreux avec convection [Paper]. VIIe colloque Franco-Québécois sur la thermique des systèmes, Université de Rennes. Unavailable

Jasmin, S., & Prud'homme, M. (2005). Inverse Determination of a Heat Source From a Solute Concentration Generation Model in Porous Medium. International Communications in Heat and Mass Transfer, 32(1-2), 43-53. External link

Jiang, H., Nguyen, T. H., & Prud'homme, M. (2005). Control of the Boundary Heat Flux During the Heating Process of a Solid Material. International Communications in Heat and Mass Transfer, 32(6), 728-738. External link

Jiang, H., Nguyen, T. H., & Prud’homme, M. (2005). Inverse unsteady heat conduction problem of second kind. (Technical Report n° EPM-RT-2005-06). Available

Jiang, H., Nguyen, T. H., & Prud’homme, M. (2005). Optimal control of induction heating for semi-solid metal forming. (Technical Report n° EPM-RT-2005-07). Available

Joubaud, L., Achim, V., & Trochu, F. (2005). Numerical simulation of resin infusion and reinforcement consolidation under flexible cover. Polymer Composites, 26(4), 417-427. External link

Joubaud, L., Trochu, F., & Le Corvec, J. (2005). Analysis of Resin Flow Under Flexible Cover in Vacuum Assisted Resin Infusion (VARI). Journal of Advanced Materials, 37(3), 3-10. External link

K

Kang, I., Ariyasu, K., Hara, Y., Hayashi, T., & Paraschivoiu, I. (2023, June). Characteristics of a straight-bladed vertical axis wind turbine in periodically varying wind [Paper]. EXPO World Conference on Wind Energy, Renewable Energy, Fuel Cell (WCWRF 2005), Hamamatsu, Japan. Unavailable

Kanki, H., Mori, Y., & Mureithi, N. W. (2005). Study on Dynamics of a curved pipe conveying fluid. Nippon Kikai Gakkai Kansai Shibu Teiji Sokai Koenkai Koen Ronbunshu, 80(6), 55-56. External link

Karthikeyan, R., Hébert, A., & Marleau, G. (2005, June). Depleting a CANDU-6 fuel assembly using detailed burnup data and reactionwise energy release [Paper]. 26th Annual CNS Conference (CSN 2005), Toronto, ON. Unavailable

Karthikeyan, R., Hébert, A., & Marleau, G. (2005, September). Effects of advanced self shielding and burnup models on fuel temperature coefficient estimation for a Candu-6 assembly [Paper]. International Topical Meeting on Mathematics and Computation, Supercomputing, Reactor Physics and Nuclear and Biological Applications (M&C 2005), Avignon, France. Unavailable

Kerboua, Y., Lakis, A. A., Thomas, M., & Marcouiller, L. (2005). Comportement dynamique des plaques rectangulaires submergées. (Technical Report n° EPM-RT-2005-05). Available

Khoukhi, A., Baron, L., & Balazinski, M. (2005, May). Programmation dynamique temps énergie minimum des robots parallèles par lagrangien augmenté [Paper]. CCToMM Mechanisms, Machines, and Mechatronics Symposium (M3 2005), Saint-Hubert. External link

Kishawy, H. A., Kannan, S., & Balazinski, M. (2005). Analytical Modeling of Tool Wear Progression During Turning Particulate Reinforced Metal Matrix Composites. CIRP Annals - Manufacturing Technology, 54(1), 55-58. External link

Klim, Z., & Balazinski, M. (2005, June). Risk assessment for continuing airworthiness [Paper]. 6e Congrès international de génie industriel, Besançon, France. Unavailable

Kummert, M., & Andre, P. (2005, August). Simulation of a model-based optimal controller for heating systems under realistic hypotheses [Paper]. 9th international IBPSA conference : building simulation 2005, Montréal, Québec. External link

Kummert, M., Andre, P., & Argiriou, A. A. (2005, August). Performance comparison of heating control strategies combining simulation and experimental results [Paper]. 9th international IBPSA conference : building simulation 2005, Montréal, Québec. External link

L

Lafortune, P., Boulanger, H., Aubin, C.-É., Villemure, I., & Moreau, A. (2005, April). Biomechanical Modeling of the Scoliotic Deformation Process in the Pinealectromized Chicken : a Feasibility Study [Paper]. 3rd International Symposium on Advanced Biomaterials/biomechanics, Montréal, Québec. Unavailable

Lakis, A. A., & Kerboua, Y. (2005). Using short-time Fourrier transform in machinery diagnosis. COMADEM, 10(1), 310-361. Unavailable

Lakis, A. A., & Safizadeh, M. S. (2005). Time-frequency algorithms. International Journal of WSEAS, 4(1). Unavailable

Le Tellier, R., & Hébert, A. (2005, June). Application of the characteristics method combined with advanced self shielding models to an ACR-type cell [Paper]. 26th Annual CNS Conference (CSN 2005), Toronto, ON. Unavailable

Le Tellier, R., & Hébert, A. (2005, September). Spectral analysis of an algebraic collapsing acceleration for the characteristics method [Paper]. International Topical Meeting on Mathematics and Computation, Supercomputing, Reactor Physics and Nuclear and Biological Applications (M&C 2005), Avignon, France. Unavailable

Lévesque, M., Derrien, K., Mishnawvsky, L., Baptiste, D., & Gilchrist, M. D. (2005, August). Modélisation du comportement mécanique de matériaux composites viscoélastiques non linéaires par une approche d'homogénéisation [Paper]. 17e Congrès français de mécanique, Troyes, France. Unavailable

Limodin, N. (2005). Amélioration de la résistance en fatigue d'un acier 4140 par nitruration gazeuse [Ph.D. thesis, École Polytechnique de Montréal]. Available

M

Mahieu, J. N., Étienne, S., Pelletier, D., & Borggaard, J. (2005). A Second-Order Sensitivity Equation Method for Laminar Flow. International Journal of Computational Fluid Dynamics, 19(2), 143-157. External link

Mailhot, P.-Y. (2005). Développement d'un système mécatronique d'accordage de clavecin [Master's thesis, École Polytechnique de Montréal]. Available

Marchand, L., Derenne, M., & Masi, V. (2005, July). Predicting gasket leak rates using a laminar-molecular flow model [Paper]. ASME Pressure Vessels and Piping Conference (PVP 2005), Denver, CO. External link

Marier, S. (2005). Modélisation géométrique d'ailes d'avion pour l'optimisation multidisciplinaire [Master's thesis, École Polytechnique de Montréal]. Available

Martin, A. (2005). Simulation d'écoulements multi-espèces de plasma avec ablation des parois : applications aux disjoncteurs haute-tension [Ph.D. thesis, École Polytechnique de Montréal]. Available

Mascle, C. (2005, June). Design for environment based on life-cycle thinking [Paper]. 6th International Congress on Industrial Engineering, Besançon, France. Unavailable

Mascle, C. (2005, July). Entropy minimization in design for maintenance, re-manufacturing, re-using [Paper]. 6th International Symposium on Assembly and Task Planning, Montréal, Québec. External link

Mascle, C., & Zhao, H. P. (2005, May). Integrating environmental consciousness in product/process development based on life-cycle thinking [Paper]. International Conference on Industrial Engineering and Systems Management (IESM 2005), Marrakech, Morocco. Unavailable

Maxwell, J. L., Boman, M., Springer, R. W., Nobile, A., Defriend, K., Espada, L., Sandstrom, M., Kommireddy, D., Pegna, J., & Goodin, D. (2005). Process-Structure Map for Diamond-Like Carbon Fibers From Ethene at Hyperbaric Pressures. Advanced Functional Materials, 15(7), 1077-1087. External link

Megateli, R. (2005). Étude des verres et vitrocérames cordiéritiques pour applications dans l'industrie de l'aluminium [Ph.D. thesis, École Polytechnique de Montréal]. Unavailable

Melhem, K., Boukas, E.-K., & Baron, L. (2005, June). Force/Position Output Feedback Tracking Control of Holonomically Constrained Rigid Bodies [Paper]. American Control Conference (ACC 2005), Portland. Oregon, USA. External link

Mesfar, W. (2005). Biomécanique du genou humain en flexion sous les activités musculaires : modélisation par la méthode des éléments finis [Ph.D. thesis, École Polytechnique de Montréal]. Available

Mesfar, W., & Shirazi-Adl, A. (2005). Biomechanics of the Knee Joint in Flexion Under Various Quadriceps Forces. KNEE, 12(6), 424-434. External link

Messaoud, D. A., Sanschagrin, B., & Derdouri, A. (2005). Study on mechanical properties and material distribution of sandwich plaques molded by co-injection. Polymer Composites, 26(3), 265-275. External link

Moglo, K. E., & Shirazi-Adl, A. (2005). Cruciate Coupling and Screw-Home Mechanism in Passive Knee Joint During Extension-Flexion. Journal of Biomechanics, 38(5), 1075-1083. External link

Moisan, É. (2005). Étude des contraintes résiduelles dans les joints soudés de turbines hydrauliques [Master's thesis, École Polytechnique de Montréal]. Available

Mureithi, N. W., Zhang, C., Ruel, M., & Pettigrew, M. J. (2005). Fluidelastic Instability Tests on an Array of Tubes Preferentially Flexible in the Flow Direction. Journal of Fluids and Structures, 21(1), 75-87. External link

N

Ndiaye, D., & Bernier, M. (2005, May). Modèle dynamique pour la détermination de la constante de temps de pompes à chaleur eau-eau [Paper]. VIIe colloque Franco-Québécois sur la thermique des systèmes, Université de Rennes. Unavailable

Ndiaye, D., Bernier, M., & Zmeureanu, R. (2005, September). Evaluation of the embodied energy in building materials and related carbon dioxide emissions in Senegal [Paper]. World Sustainable Building Conference, Tokyo. External link

Nguyen, T. H., Bahloul, A., & Nguyen, T. H. (2005). Stability of Gravitactic Micro-Organisms in a Fluid-Saturated Porous Medium. International Communications in Heat and Mass Transfer, 32(1-2), 54-63. External link

O

Oulmane, A., Farah, É., & Ross, A. (2005, May). Dynamic modeling of a viscoelastic sandwich [Paper]. 20e Congrès canadien de mécanique appliquée, Montréal, Québec. Unavailable

Ouriemi, M., Vasseur, P., & Bahloul, A. (2005). Natural convection of a binary fluid in a slightly inclined shallow cavity. Numerical Heat Transfer. Part A, Applications, 48(6), 547-565. External link

Ouriemi, M., Vasseur, P., & Bahloul, A. (2005). Natural Convection of a Binary Mixture Confined in a Slightly Inclined Tall Enclosure. International Communications in Heat and Mass Transfer, 32(6), 770-778. External link

P

Pazos, V., Cheriet, F., Song, L., Labelle, H., & Dansereau, J. (2005). Accuracy Assessment of Human Trunk Surface 3D Reconstructions From an Optical Digitising System. Medical & Biological Engineering & Computing, 43(1), 11-15. External link

Pettigrew, M. J., Zhang, C., Mureithi, N. W., & Pamfil, D. (2005). Detailed Flow and Force Measurements in a Rotated Triangular Tube Bundle Subjected to Two-Phase Cross-Flow. Journal of Fluids and Structures, 20(4), 567-575. External link

Polat, O., & Bilgen, E. (2005). Natural Convection and Conduction Heat Transfer in Open Shallow Cavities With Bounding Walls. Heat and Mass Transfer, 41(10), 931-939. External link

Potvin, C. (2005). Étude des perturbations vibratoires des dalles de montage dans un laboratoire de fabrication mécanique [Master's thesis, École Polytechnique de Montréal]. Available

Prado, P. (2005). Développement d'un système d'optimisation multidisciplinaire flexible et adaptable à différentes méthodes de décomposition [Master's thesis, École Polytechnique de Montréal]. Available

Prado, P., Panchenko, Y., Trépanier, J.-Y., & Tribes, C. (2005, June). Preliminary multidisciplinary design optimization system : A software solution for early gas turbine conception [Paper]. ASME Turbo Expo, Reno-Tahoe, NV. External link

Prud'homme, M., & Bougherara, H. (2005). Weakly Non Linear Convection in a Shallow Horizontal Cavity Under Uniform Crossed Heat Fluxes. International Journal of Heat and Mass Transfer, 48(11), 2278-2289. External link

Prud'homme, M., & Bougherara, H. (2005). Weakly Non-Linear Stability of Stratified Natural Convection in a Vertical Cavity With Lateral Temperature Gradient. International Communications in Heat and Mass Transfer, 32(1-2), 32-42. External link

Prud'homme, M., & Jasmin, S. (2005, January). Inverse free convection solution in a porous matrix with a biochemical heat source [Paper]. ECCOMAS, Santorini. Unavailable

Przybylo, A. (2005). Optimisation par algorithmes de clustering de la construction automatique de bases de connaissances floues [Master's thesis, École Polytechnique de Montréal]. Available

Przybylo, A., Achiche, S., Balazinski, M., & Baron, L. (2005). Influence of clustering pre-processing on genetically generated fuzzy knowledge bases. Computer Assisted Mechanics and Engineering Sciences, 12(2-3), 207-221. Unavailable

R

Ratle, F. (2005). Optimisation de la conception et de la fabrication des matériaux composites par des algorithmes d'évolution et d'apprentissage [Master's thesis, École Polytechnique de Montréal]. Unavailable

Renoux, J. (2005). Conception et fabrication de pièces composites par infusion [Master's thesis, École Polytechnique de Montréal]. Available

Riverin, J.-L., & Pettigrew, M. J. (2005, July). Fluctuating forces in U-tubes subjected to internal two-phase flow [Paper]. 2005 ASME Pressure Vessels and Piping Conference, PVP, Denver, CO, United States. External link

Ruiz, E., & Trochu, F. (2005). Comprehensive thermal optimization of liquid composite molding to reduce cycle time and processing stresses. Polymer Composites, 26(2), 209-230. External link

Ruiz, E., & Trochu, F. (2005). Manufacture of composites by a flexible injection process using a double or multiple cavity mold. (Patent Application no. WO2005000566). External link

Ruiz, E., & Trochu, F. (2005). Numerical Analysis of Cure Temperature and Internal Stresses in Thin and Thick Rtm Parts. Composites Part A: Applied Science and Manufacturing, 36(6), 806-826. External link

Ruiz, E., & Trochu, F. (2005). Thermomechanical Properties During Cure of Glass-Polyester Rtm Composites: Elastic and Viscoelastic Modeling. Journal of Composite Materials, 39(10), 881-916. External link

Ruiz, E., Achim, V., Trochu, F., & Breard, J. (2005, August). Reduction of void formation in LCM a practical numerical approach [Paper]. Canada composites International Conference, Vancouver, Canada. Unavailable

Ruiz, E., Demaria, C. F., & Trochu, F. (2005). PolyPer, a freeware package for preform permeability characterisation. JEC Composites (17), 70-72. Unavailable

S

Saeed, F., Brette, C., Fregeau, M., Trifu, O., & Paraschivoiu, I. (2005, June). A three-dimensional water droplet trajectory and impingement analysis program [Paper]. 23rd AIAA Applied Aerodynamics conference, Toronto, Ontario. External link

Safizadeh, M. S., Lakis, A. A., & Thomas, M. (2005, April). Using short-time Fourier transform in machinery diagnosis [Paper]. 4th WSEAS International Conference on Electronics, Signal Processing and Control (ESPOCO 2005), Rio de Janeiro, Brazil (7 pages). External link

Sanschagrin, B., Fortin, C., Vadean, A., & Lakis, A. A. (2005, July). Virtual product development within a fourth year option in the mechanical enginering curriculum [Paper]. Canadian Design Engineering Network Conference, Kaninaskis, Alberta, Canada. External link

Scalzo, O. (2005). Caractérisation de NiTi poreux fabriqué à partir de poudres métalliques [Master's thesis, École Polytechnique de Montréal]. Available

Sfeir, A., Bernier, M., Million, T., & Joly, A. (2005, February). A methodology to evaluate pumping energy consumption in GCHP systems [Paper]. ASHRAE 2005 Winter Meeting, Orlando, FL. Unavailable

Shirazi, R., & Shirazi-Adl, A. (2005). Analysis of Articular Cartilage as a Composite Using Nonlinear Membrane Elements for Collagen Fibrils. Medical Engineering & Physics, 27(10), 827-835. External link

Shirazi-Adl, A., & Moglo, K. E. (2005). Effect of changes in cruciate ligaments pretensions on knee joint laxity and ligament forces. Computer Methods in Biomechanics and Biomedical Engineering, 8(1), 17-24. External link

Shirazi-Adl, A., El-Rich, M., Pop, D., & Parnianpour, M. (2005). Spinal Muscle Forces, Internal Loads and Stability in Standing Under Various Postures and Loads-Application of Kinematics-Based Algorithm. European Spine Journal, 14(4), 381-392. External link

Sim, W. G., Mureithi, N. W., & Pettigrew, M. J. (2023, July). Two-Phase flow modeling in a pipe related to flow-induced vibration [Paper]. ASME-PVP Symposium on Flow-Induced Vibration, Denver, Colorado. External link

Smoczynska, A., Bartnicka, H., Balazinski, M., Achiche, S., Elektorowicz, M., & Smoczynski, L. (2005, March). Assessment of Zn and Cu effect of Cadmium sorption based on genetically generated fuzzy knowledge bases [Paper]. International Workshop on Fate and Impact of Persistent Polluents in the Agroecosystems, Pulawy, Poland. Unavailable

Smoczynska, A., Bojanowska, I., Balazinski, M., Achiche, S., & Elektorowicz, M. (2005, March). Zinc sorption to soil; application of an artificial intelligence method [Paper]. International Workshop on Fate and Impact of Persistent Polluents in the Agroecosystems, Pulawy, Poland. Unavailable

Soukane, D. M., Shirazi-Adl, A., & Urban, J. P. G. (2005). Analysis of nonlinear coupled diffusion of oxygen and lactic acid in intervertebral discs. Transactions of the ASME. Journal of Biomechanical Engineering, 127(7), 1121-1126. External link

Soukane, S., & Trochu, F. (2005). New Remeshing Applications in Resin Transfer Molding. Journal of Reinforced Plastics and Composites, 24(15), 1629-1653. External link

Soukane, S., Ruiz, E., & Trochu, F. (2005). A novel approach to reduce calculation time during simulations of resin transfer molding. Revue Européenne des Éléments Finis, 14(6-7), 819-840. External link

Surcel, M. D., & Gou, M. (2005). Development of a Mathematical Model for Evaluating Child Occupant Behaviour in the Case of a Vehicle Side Impact Simulation. International Journal of Crashworthiness, 10(1), 111-118. External link

Surcel, M.-D., & Gou, M. (2005, June). Comparative study of Hybrid III and Q3 child dummies behaviour in the case of side and frontal impact dynamic simulations [Paper]. XV conférence Canadienne multidisciplinaire sur la sécurité routière (CCMSR XV), Frédéricton, Nouveau-Brunswick. Unavailable

Surcel, M.-D., & Gou, M. (2005). Étude par simulation mathématique de l'efficacité en choc latéral d'un dispositif de retenue pour enfant selon la configuration d'installation : des modèles numériques de l'être humain pour la protection des usagers contre les effets des accidents. Recherche, transports, sécurité (86), 47-64. External link

T

Tam, S. K., Dusseault, J., Polizu, S., Menard, M., Halle, J. P., & Yahia, L. (2005). Physicochemical Model of Alginate-Poly-L-Lysine Microcapsules Defined at the Micrometric/Nanometric Scale Using Atr-Ftir, Xps, and Tof-Sims. Biomaterials, 26(34), 6950-6961. External link

Tchon, K. F., Khachan, M., Guibault, F., & Camarero, R. (2005). Three-Dimensional Anisotropic Geometric Metrics Based on Local Domain Curvature and Thickness. Computer-Aided Design, 37(2), 173-187. External link

Tchon, K.-F., Guibault, F., Dompierre, J., & Camarero, R. (2005, June). Adaptive hybrid meshing using metric tensor line networks [Paper]. 17th AIAA Computational Fluid Dynamics Conference, Toronto, ON, Canada. External link

Therriault, D., Shepherd, R. F., White, S. R., & Lewis, J. A. (2005). Fugitive Inks for Direct-Write Assembly of Three-Dimensional Microvascular Networks. Advanced Materials, 17(4), 395-399. External link

Thomas, M., Abassi, K., Lakis, A. A., & Marcouiller, J. L. (2005, October). Analyse modale expérimentale d'une structure soumise à un écoulement turbulent [Operational modal analysis of a structure subjected to a turbulent flow]. [Paper]. 23rd Seminar on Machinery Vibration, Edmonton, Alberta. External link

Thomasset, J., Carreau, P., Sanschagrin, B., & Ausias, G. (2005). Rheological properties of long glass fiber filled polypropylene. Journal of Non-Newtonian Fluid Mechanics, 125(1), 25-34. External link

Thouin, J. F., Mathieu, P. A., Joncas, J., & Aubin, C.-É. (2004, September). EMG study of back muscles in patients with Duchenne dystrophy [Paper]. Canadian Medical and Biological Engineering Conference (CMBEC 2004), Québec, Québec (2 pages). Published in CMBES Proceedings, 28. External link

Touraine, B. (2005). Modélisation d'un procédé d'injection sous paroi flexible [Master's thesis, École Polytechnique de Montréal]. Available

Tremblay, D. (2005). Application d'une méthode d'éléments finis adaptative à des problèmes d'interactions fluide-structure en axisymétrique [Master's thesis, École Polytechnique de Montréal]. Available

Tremblay, G., Gillet, J. N., Sheng, Y. L., Bernier, M., & Paul-Hus, G. (2005). Optimizing Fiber Bragg Gratings Using a Genetic Algorithm With Fabrication-Constraint Encoding. Journal of Lightwave Technology, 23(12), 4382-4386. External link

Tribes, C., Dube, J.-F., & Trépanier, J.-Y. (2005). Decomposition of multidisciplinary optimization problems: Formulations and application to a simplified wing design. Engineering Optimization, 37(8), 775-796. External link

Trudel-Boucher, D., Fisa, B., Denault, J., & Gagnon, P. (2005). Thermoforming complex parts from unconsolidated and consolidated polypropylene/glass fibre fabrics. Polymers and Polymer Composites, 13(6), 543-558. External link

V

Vasilevskiy, D., Frechette, P., Turenne, S., & Masut, R. A. (2005, June). Thermoelectric properties and transport phenomena in (Bi₁₋ₓSbₓ)₂(Te₁₋ySey)₃ quaternary n-type alloys produced by powder metallurgy and extrusion [Paper]. 24th International Conference on Thermoelectrics (ICT 2005), Clemson, SC, USA. External link

Vasilevskiy, D., Semenyuk, V., & Turenne, S. (2005, September). Properties of cooling modules produced form (Bi,Sb)₂(Te,Se)₃ hot extruded alloys [Paper]. 3rd European Conference on Thermoelectrics, Nancy, France. Unavailable

Vijayakumar, G., Kummert, M., Klein, S. A., & Beckman, W. A. (2005). Analysis of short-term solar radiation data. Solar Energy, 79(5), 495-504. External link

Villemure, I., Chung, M. A., Seck, C. S., Kimm, M. H., Matyas, J. R., & Duncan, N. A. (2005). Static compressive loading reduces the mRNA expression of type II and X collagen in rat growth-plate chondrocytes during postnatal growth. Connect tissue research, 46(4-5), 211-219. External link

Villemure, I., Cloutier, L., Matyas, J. R., & Duncan, N. A. (2005, May). Detailed strain distributions within compressed rat cartilaginous growth plates [Paper]. 11th Annual Canadian Connective Tissue Conference 2005, Montréal, Québec. Unavailable

Villemure, I., Cloutier, L., Matyas, J. R., & Duncan, N. A. (2005, April). Non-uniform strain distributions within rat cartilaginous growth plates under uniaxial compression [Paper]. 3rd International Symposium on Advanced Biomaterials/biomechanics, Montréal, Québec. Unavailable

Violette, R. (2005). Instabilité fluidelastique d'un faisceau de tubes d'échangeurs de chaleur soumis à un écoulement diphasique transverse [Master's thesis, École Polytechnique de Montréal]. Available

Violette, R., Mureithi, N. W., & Pettigrew, M. J. (2005, July). Two-phase flow induced vibration of an array of tubes preferentially flexible in the flow direction [Paper]. ASME Pressure Vessels and Piping Conference (PVP 2005), Denver, CO, United States. External link

W

Wang, J.-L., Shirazi-Adl, A., & Parnianpour, M. (2005). Search for critical loading condition of the spine–A meta analysis of a nonlinear viscoelastic finite element model. Computer Methods in Biomechanics and Biomedical Engineering, 8(5), 323-330. External link

Wang, Y. L., Guibault, F., & Camarero, R. (2005, September). Automatic Near-Body Domain Decomposition Using the Eikonal Equation [Paper]. 14th International Meshing Roundtable, San Diego, CA, USA. External link

Wang, Y., Guibault, F., Camarero, R., & Tchonx, K.-F. (2005, June). A parameterization transporting surface offset construction method based on the Eikonal equation [Paper]. 17th AIAA Computational Fluid Dynamics Conference, Toronto, ON, Canada. External link

Y

Yutaka, H., Kang, I., Hayashi, T., & Paraschivoiu, I. (2023, June). Measurements of torque characteristics of a vertical axis wind turbine with inclined straight blades [Paper]. EXPO World Conference on Wind Energy, Renewable Energy, Fuel Cell (WCWRF 2005), Hamamatsu, Japan. Unavailable

Z

Zargar, S. H. H., & Mayer, J. R. R. (2023, May). Methodology for Motion Error Diagnostic of a Machine Tool Trunnion Axis Using DBB [Paper]. 20th Canadian Congress of Applied Mechanics, Montréal, Québec. Unavailable

Zargar, S. H. H., & Mayer, J. R. R. (2005, June). Methodology for the calibration of a machine tool trunnion axis tilt, radial and axial motion errors usting telescoping magnetic double ball bar [Paper]. 7th International Conference on Laser Metrology, Machine Tool, CMM, and Robot Performance, University of Cranfield. Unavailable

Zargarbashi, S. H. H., & Mayer, J. R. R. (2005). A Model Based Method for Centering Double Ball Bar Test Results Preventing Fictitious Ovalization Effects. International Journal of Machine Tools and Manufacture, 45(10), 1132-1139. External link

Zervoudis, M. (2005). Caractérisation d'une machine outil à système d'entraînement par moteurs linéaires durant le fraisage orbital à hautes vitesses d'alliages légers [Master's thesis, École Polytechnique de Montréal]. Available

Zhang, C., Pettigrew, M. J., & Mureithi, N. W. (2005, July). Vibration excitation force measurements in a rotated triangular tube bundle subjected to two-phase cross flow [Paper]. ASME Pressure Vessels and Piping Conference (PVP 2005), Denver, CO. External link

Zhim, F., Laflamme, G. Y., Viens, H., Saidane, K., & Yahia, L. (2005). Biomechanical Stability of High Tibial Opening Wedge Osteotomy: Internal Fixation Versus External Fixation. Clinical Biomechanics, 20(8), 871-876. External link

Zhim, F., Yahia, L., Pegna, J., Moore, J., Ayers, R., & Laflamme, G. Y. (2005). Functionally graded bioceramics produced by combustion synthesis process for bone regeneration. Advanced Materials and Processes, 163(7), 68-68. Unavailable

List generated on: Thu Sep 21 08:20:13 2023 EDT