 | Up a level |
Abdin, Y., Ghaedsharaf, M., & Laberge Lebel, L. (2024). An integrated approach toward digital design and simulation of the automated overbraiding process for composite manufacturing. Materials Today Communications, 110559-110559. External link
Ait Aariba, A., Ross, A., Fotsing, E. R., & Mardjono, J. (2024). Improving acoustic absorption modeling of additively manufactured microperforated panels through kriging-based approaches. NOISE-CON proceedings, 270(7), 4080-4091. External link
Akbarian, F. (2024). Influence of the Discontinuities on the Fatigue Behavior of Welded 410NiMo Turbines [Master's thesis, Polytechnique Montréal]. Restricted access
Ali, M. S., De Holanda Sousa, R., Awad, M., Camarero, R., & Trépanier, J.-Y. (2024). Implicit interpolation method for immersed boundary methods. Journal of engineering mathematics, 146, 5 (21 pages). Available
Andrade, R. M., Pugliese, B. L., Mohebbi, A., & Bonato, P. (2024, September). An Adaptive Oscillators-Based Approach to Achieve Transparent Control of a Six DoF Lower-Limb Exoskeleton [Paper]. 20th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications (MESA 2024), Genova, Italy. External link
Andrade, R. M., Sapienza, S., Mohebbi, A., Fabara, E. E., & Bonato, P. (2024). Overground walking with a transparent exoskeleton shows changes in spatiotemporal gait parameters. IEEE Journal of Translational Engineering in Health and Medicine, 12, 182-193. Available
Antar, E., & Robert, É. (2024). Diffusive-thermal instabilities in unstrained H₂O-diluted syngas diffusion flames. Combustion and Flame, 261, 113313 (17 pages). Available
Antar, E., & Robert, É. (2024). Intrinsic combustion instabilities in ammonia-hydrogen/methane non-premixed flames. Proceedings of the Combustion Institute, 40(1-4), 105203 (7 pages). External link
Antar, E., & Robert, É. (2024). Thermodynamic analysis of small-scale polygeneration systems producing natural gas, electricity, heat, and carbon dioxide from biomass. Energy, 290, 130278 (13 pages). Available
Arani, M. S., Bakhtiari, M., Toorani, M. H., & Lakis, A. A. (2024). Studying the nonlinear response of incompressible hyperelastic thin circular cylindrical shells with geometric imperfections. Journal of the Mechanical Behavior of Biomedical Materials, 155, 106562 (13 pages). External link
Ashok, V., Absalan, F., Silverwood, A., Robert, É., Claveau-Mallet, D., & Bédard, É. (2024). Crossflow microsand filtration in cooling tower systems to control fouling in heat exchanger devices. Journal of Building Engineering, 95, 110167 (11 pages). Available
Ashrafi, F., & Vo, H. D. (2024). Passive flow control at impeller radial bend for stall delay in centrifugal compressors with fishtail pipe diffusers. Aerospace Science and Technology, 145, 108840 (23 pages). External link
Assi, P., Achiche, S., & Laberge Lebel, L. (2024). Horngear and carrier design for braiding tailorable composite preforms. CIRP Journal of Manufacturing Science and Technology, 50, 228-237. External link
Badache, M., Aidoun, Z., & Manneh, F. (2024). A CO₂ geothermal thermosiphon to preheat supply air for ventilation heat recovery systems in cold climates. Geothermics, 119, 102922 (15 pages). External link
Bae, J., Ardebili, Y. N., Vena, P., & Chaudhuri, S. (2024). Effect of swirler spin on flame shape and combustion dynamics. Proceedings of the Combustion Institute, 40(1-4), 105663 (7 pages). External link
Bagheri, M. A., Aubin, C.-É., Nault, M.-L., & Villemure, I. (2024). Finite element analysis of distraction osteogenesis with a new extramedullary internal distractor. Computer Methods in Biomechanics and Biomedical Engineering, 2406367 (15 pages). External link
Balazinski, M., Baron, L., Shi, Z., & Escaich, C. (2024). Effects of Tool Geometry and Fluid on the Surface Morphology and Integrity in Scratching TiMMCs. International Journal of Abrasive Technology, 12(2), -. External link
Barbeau, L., Golshan, S., Deng, J., Étienne, S., Béguin, C., & Blais, B. (2024). High-order moving immersed boundary and its application to a resolved CFD-DEM model. Computers & Fluids, 268, 106094 (14 pages). External link
Bawin, A., Garon, A., & Remacle, J.-F. (2023, March). Optimally Convergent Isoparametric P² Mesh Generation [Paper]. 2023 SIAM International Meshing Roundtable Workshop (SIAM IMR 2023), Amsterdam, The Netherlands. External link
Beaudry, G., Pasquier, P., Faucher, J., Tonellato, G., & Kummer, M. (2024, April). Standing column wells in cold climates : a case study in a highly productive aquifer [Presentation]. In 2024 EGU General Assembly, Vienna, Austria. Unavailable
Beglarzadeh, B., & Mayer, J. R. R. (2024). Sensorless loaded test for machine tool 2D compliance characterization using a tool-mounted roller bearing. Journal of Manufacturing Processes, 111, 151-165. External link
Belzile, A., Armanasco, F., Chiacchiarelli, L. M., Lebrun, G., & Ruiz, E. (2024). Development of a novel flax soy-based polyurethane prepreg composite. Composites Part A: Applied Science and Manufacturing, 181, 108136 (12 pages). External link
BenDavid, E., Ramezanian, S., Lu, Y., Rousseau, J., Schroeder, A., Lavertu, M., & Tremblay, J. P. (2024). Emerging perspectives on prime editor delivery to the brain. Pharmaceuticals, 17(6), 763 (42 pages). Available
Bertrand, D. T., Fu, R., Kavaseri, K., Villemure, I., Rauch, F., Hamdy, R., Yang, H., & Willie, B. M. (2024). The accordion technique did not improve bone healing in a mouse model of distraction osteogenesis. Scientific Reports, 14, 24466 (13 pages). Available
Billiet, G., Doligez, X., Marleau, G., Ernoult, M., Hébert, A., & Thiollière, N. (2024). Multi-physics DONJON5 reactor models for improved fuel cycle simulation with CLASS. EPJ Nuclear Sciences & Technologies, 13(5), 2024008 (13 pages). Available
Billotte, C., Romana, L., Flory, A., Kaliaguine, S., & Ruiz, E. (2024). Recycled carbon black/high-density polyethylene composite from waste tires: manufacturing, testing, and aging characterization. Recycling, 9(6), 107 (19 pages). Available
Billotte, C., Romana, L., Flory, A., Kaliaguine, S., & Ruiz, E. (2024). Recycled from waste tires carbon black/high-density polyethylene composite: Multi-scale mechanical properties and polymer aging. Polymer Composites, 28585 (14 pages). External link
Birglen, L. (2024). Robot Hands. In Ang, M. H., Khatib, O., & Siciliano, B. (eds.), Encyclopedia of Robotics (pp. 1-17). External link
Blanchet, M., Zayni, M. K., & Laurendeau, É. (2024, July). Contribution to IPW2 by Studying Single and Multi-Layer Icing in 2D, 2.5D and 3D [Paper]. 2024 AIAA Aviation Forum and Ascend, Las Vegas, Nevada, USA. External link
Blier, R., Monajati, L., Mehrabian, M., & Boukhili, R. Strength Optimisation of Hybrid Bolted/Bonded Composite Joints Based on Finite Element Analysis [Paper]. Unspecified (16 pages). Available
Blier, R., Monajati, L., Mehrabian, M., & Boukhili, R. (2024). The tensile behavior of hybrid bonded bolted composite joints: 3D-digital image correlation versus finite element analysis. Materials, 17(7), 1675 (18 pages). Available
Boisneault, L. P. J. C., Audet, C., & Mélançon, D. (2024). Blackbox optimization for origami-inspired bistable structures. (Technical Report n° G-2024-51). External link
Boukor, M., Choimet, A., Laurendeau, É., & Gosselin, F. (2024). Flutter limitation of drag reduction by elastic reconfiguration. Physics of Fluids, 36(2), 021915 (11 pages). External link
Bouscarrat, D., Lévesque, M., & Vieille, B. (2024). Time-dependent damage development during creep in carbon woven-ply polyphenylene sulfide laminates above the glass transition temperature. Journal of Composite Materials. External link
Brighenti, A., Vezzoni, B., Hébert, A., Calgaro, B., Garcia-Cervantes, E. Y., Huaccho Zavala, G., Graziano, L., Laurent, P., Mercatali, L., Mosca, P., Previti, A., Santandrea, S., Vidal, J. F., Willien, A., & Zmijarevic, I. (2024). Development of NEMESI: A Multiparameter Library Generator Prototype for Industrial VVER and PWR Applications Based on APOLLO3®. Nuclear Science and Engineering, 2340161 (18 pages). External link
Chakraborty, A., Martin, É., & Habibnejad-Korayem, M. (2024). Effect of carbon on the additive manufacturability of plasma-atomized aluminum alloys – A robust powder characterization study. Powder Technology, 452, 120559 (16 pages). External link
Chapdelaine, B., Celce, M., Vidal, C., Birglen, L., & Monsarrat, B. (2024, May). Simulation and Experimental Validation of an Autonomous Perching and Takeoff Method for a Multirotor UAV on Vertical Surfaces using a Suction Cup [Paper]. 2024 IEEE International Conference on Robotics and Automation (ICRA 2024), Yokohama, Japan. External link
Chartray-Pronovost, M., & Robert, É. (2024). Leidenfrost effect in the flash vaporization of hydrogen peroxide and water mixtures. Physics of Fluids, 36(11), -. External link
Chevalier, B. (2024). Caractérisation des vibrations d'un faisceau de tubes soumis à un flux axial et à un jet transverse [Master's thesis, Polytechnique Montréal]. Restricted access
Chevalier, B., Mureithi, N. W., Gad-el-Hak, I., & Karazis, K. (2024). Investigation of fluidelastic instability of fuel rod bundles subjected to combined axial flow and jet crossflow. Journal of Pressure Vessel Technology, 1-12. External link
Choudhary, R., Rzig, I., Fotsing, E. R., & Ross, A. (2024, July). Parametric investigation of energy harvester design - piezoelectric coverage and cantilever length [Paper]. 30th International Congress on Sound and Vibration (ICSV 2024), Amsterdam, Netherlands (8 pages). Unavailable
Choudhary, R., Rzig, I., Fotsing, E. R., & Ross, A. (2024). A unified nonlinear model of piezoelectric cantilever beams with complex geometries for energy harvesting applications. Smart Materials and Structures. External link
Cimmino, M. (2024). g-Functions for fields of series- and parallel-connected boreholes with variable fluid mass flow rate and reversible flow direction. Renewable Energy, 228, 120661 (16 pages). External link
Cio, Y.-S. L.-K., Beltrame, G., Vadean, A., Mohebbi, A., & Achiche, S. (2024). Concurrent product layout design optimization and dependency management using a modified NSGA-III approach. Frontiers in Mechanical Engineering, 10, 1178501. Available
Coulombe, M., Guy, A., Barchi, S., Labelle, H., & Aubin, C.-É. (2024). Optimized braces for the treatment of adolescent idiopathic scoliosis: A study protocol of a prospective randomised controlled trial. PLOS ONE, 19(2), 0292069 (11 pages). Available
Coulombe, M., Guy, A., Joncas, J., Manitiu, A., Poirier, P., Barchi, S., Chémaly, O., Brassard, F., Parent, S., Labelle, H., & Aubin, C.-É. (2024). Immediate Correction of Idiopathic Scoliosis with Nighttime Braces Created by A fully-automated Generative Design Algorithm. Spine. External link
Coulombel, P., & Denner, F. (2024). Modeling time-delayed acoustic interactions of cavitation bubbles and bubble clusters. Physics of Fluids, 36(12), -. External link
Darwish, S., Mureithi, N. W., Hadji, A., & Cho, M. (2024). Wear work-rate measurement for different steam generator tube layouts in two-phase cross flow. Nuclear Engineering and Design, 424, 113226. External link
Dega, C., Boukhili, R., Esmaeili, B., Laviolette, J.-P., Doucet, J., & Decaens, J. (2024). Microwave-Assisted Pyrolysis of Carbon Fiber-Reinforced Polymers and Optimization Using the Box–Behnken Response Surface Methodology Tool. Materials, 17(13), 3256 (19 pages). Available
Delbé, C., Colaïtis, Y., & Batailly, A. (2023, June). Application of Numerical Bifurcation Tracking Strategy to Blade-Tip/Casing Interactions in Aircraft Engines [Paper]. 2023 Turbomachinery Technical Conference and Exposition, Hynes Convention Center (10 pages). Published in Journal of Engineering for Gas Turbines and Power, 146(10). External link
Denner, F. (2024). Acoustic pressure modulation driven by spatially non-uniform flow. Journal of the Acoustical Society of America, 155(2), 984-989. External link
Denner, F. (2024). The Kirkwood-Bethe hypothesis for bubble dynamics, cavitation, and underwater explosions. Physics of Fluids, 36(5), 051302 (25 pages). External link
Dhar, L., Recchia, G., Anne, F., Béguin, C., Étienne, S., Côté, P., & Bornard, L. (2024). Two-phase flow properties for air sheets injected from rectangular slots in high-velocity crossflow. International Journal of Heat and Mass Transfer, 236, 126278 (13 pages). External link
Diby, I. C. P., Belkhiri, N., Nohair, B., Kazeruni, M., Ruiz, E., & Kaliaguine, S. (2024). HDPE crystalline lamellae in composites involving pyrolytic carbon black: Effect on elastic modulus. Polymer Composites, 28986 (16 pages). External link
Doostinia, M., Falabretti, D., Verticale, G., & Bolouki, S. (2024, September). Node Centrality Evaluation Based on Complex Network Theory: A Real Case Study for an Integrated Power Distribution and ICT System [Paper]. AEIT International Annual Conference (AEIT), Trento, Italy. External link
Dumas, B., Jobin, O., & Robert, É. (2024). Multiple Diagnostics of Hybrid Rocket Ignition and Effect of Hypergolic Additive Granulometry. Journal of Propulsion and Power, 40(4). External link
Duong, X. T., Nguyen-Tri, P., Mayer, J. R. R., Luong, C. H., & Balazinski, M. (2023, August). Optimization of Initial Cutting Parameters for a Turning Process Based on the Response Surface Methodology [Paper]. Materials for Sustainable Environmental, Energy, and Bioresource Applications (M2EBA 2023), Trois-Rivières, QC, Canada. Published in Springer proceedings in earth and environmental sciences. External link
Durocher, A., Fan, L., Füri, M., Bourque, G., Bergthorson, J. M., Yun, S., & Vena, P. (2024). Phase-averaged, 3D OH-LIF reconstruction for multi-nozzle, micromixed hydrogen combustion. Proceedings of the Combustion Institute, 40(1-4), 105561 (7 pages). External link
Durocher, A., Fan, L., Füri, M., Bourque, G., Sirois, J., May, D. A., Bergthorson, J. M., Yun, S., & Vena, P. (2024). Characterization of a 5-nozzle array using premix/micromix injection for hydrogen. Applications in Energy and Combustion Science, 18, 100260 (13 pages). Available
Durocher, A., Fan, L., Füri, M., Bourque, G., Sirois, J., May, D. A., Bergthorson, J. M., Yun, S., & Vena, P. (2024). An investigation of a multi-injector, premix/micromix burner burning pure methane to pure hydrogen. Journal of Engineering for Gas Turbines and Power, 1-11. External link
Dussault, A., Klaylat, T., Goel, G., Rosenzweig, D. H., & Villemure, I. (2024, May). Assessing the Effect of Cyclical Strain on hbmMSCs Differentiation on 3D-Co-Printed Scaffolds for Ligament Replacement [Paper]. Surgical and Interventional Sciences Research Day 2024, Montreal, Qc, Canada. Unavailable
El Hajj, E., Rastegar Dehkordi, N., Flores Salinas, M., Fotsing, E. R., Ross, A., & Vidal, D. (2024). Numerical study of thermo-viscous effects in acoustic materials using linearized Navier-Stokes equations. NOISE-CON proceedings, 270(3), 8577-8585. External link
Elsherbiny, A. M. M., & Leclaire, S. (2024). Integration of Lattice Boltzmann-overset method with non-conforming quadtree mesh based on the combination of spatial and Lagrangian-link interpolated streaming technique. Computers & Fluids, 106522 (16 pages). External link
Erdem, A. K., Denner, F., & Biancofiore, L. (2024). Numerical Analysis of the Dispersion and Deposition of Particles in Evaporating Sessile Droplets. Langmuir, 4c00680 (18 pages). External link
Escaich, C., Shi, Z., Baron, L., & Balazinski, M. (2024). Effects of tool geometry and fluid on the surface morphology and integrity in scratching TiMMCs. International Journal of Abrasive Technology, 12(2), 147-166. External link
Eskandari, A. H., Ghezelbash, F., Shirazi-Adl, A., & Larivière, C. (2024). Comparative evaluation of different spinal stability metrics. Journal of Biomechanics, 162, 111901 (10 pages). External link
Eskandari, A. H., Ghezelbash, F., Shirazi-Adl, A., Arjmand, N., & Larivière, C. (2024). Effect of a back-support exoskeleton on internal forces and lumbar spine stability during low load lifting task. Applied Ergonomics, 123, 104407 (11 pages). External link
Esmaeilzadehazimi, M. (2024). Vibration analysis of ring stiffened truncated conical shells under the influence of stationary and flowing fluids [Ph.D. thesis, Polytechnique Montréal]. Restricted access
Esmaeilzadehazimi, M., Bakhtiari, M., Toorani, M., & Lakis, A. A. (2024). Numerical modeling and analysis of fluid-filled truncated conical shells with ring stiffeners. Journal of Fluids and Structures, 127, 104121 (35 pages). External link
Esmaeilzadehazimi, M., Lakis, A. A., & Toorani, M. (2024). Finite element model to investigate the dynamic instability of ring stiffened conical shells subjected to flowing fluid. Finite Elements in Analysis and Design, 241, 104221 (23 pages). Available
Esmati, K., Chakraborty, A., Pendurti, S., Natarajan, A., & Martin, É. (2024). Anisotropic sintering behavior of stainless steel 316L printed by binder jetting additive manufacturing. Materials Today Communications, 41, 110528 (13 pages). External link
Esmati, K., Chakraborty, A., Pendurti, S., Natarajan, A., & Martin, É. (2024, March). Influence of Temperature and Print Orientation on Anisotropic Sintering in Binder Jet SS316L [Paper]. 153rd Annual Meeting & Exhibition Supplemental Proceedings (TMS 2024), Orlando, FL, USA. External link
Fattahi, K., Dodier, G., Robert, É., & Boffito, D. C. (2024). Flow effects on sonochemical oxidation activity in a 20 kHz ultrasonic horn system. Chemical Engineering Journal, 489, 15203 (16 pages). External link
Favretti, I., Roux, L., & Batailly, A. (2024). Validation of the numerical simmulation of rotor/stator interactions in aircraft engine low-pressure compressors. Journal of Engineering for Gas Turbines and Power, GTP-24-164 (11 pages). External link
Favretti, I., Roux, L., & Batailly, A. (2024, June). Validation of the Numerical Simulation of Rotor/Stator Interactions in Aircraft Engine Low-Pressure Compressors [Paper]. ASME Turbo Expo 2024: Turbomachinery Technical Conference and Exposition, London, United Kingdom. External link
Francolini, B., Fan, L., Abbasi-Atibeh, E., Bourque, G., Vena, P., & Bergthorson, J. M. (2024). Investigation of differential diffusion in lean, premixed, hydrogen-enriched swirl flames. Applications in Energy and Combustion Science, 18, 100272 (16 pages). Available
Frigon, N., Cantin, J., & Villemure, I. (2024, June). ---Crafting a sustainable engineering vision through a consultation process [Paper]. Canadian Engineering Education Association Conference (CEEA 2024), Edmonton, Alberta, Canada (9 pages). External link
Fu, B., Zhang, L.-R., She, D., Wei, C.-L., & Hébert, A. (2024). XPZLIB: an HDF5-format multi-group cross-section library. Nuclear Science and Techniques, 35(11), 191. External link
Gad-el-Hak, I., Mureithi, N. W., & Karazis, K. (2024). Vibrations of PWR fuel assembly under axial coolant flow and oblique impingement of jet cross-flow from LOCA holes. Nuclear Engineering and Design, 429, 113586 (18 pages). External link
Gad-el-Hak, I., Mureithi, N. W., Karazis, K., & Painter, B. (2024). Mechanism and risk assessment of baffle-jetting-induced vibrations in fuel rods. Nuclear Engineering and Design, 416, 112747 (13 pages). External link
Ghezelbash, F., Eskandari, A. H., Robert-Lachaine, X., Cao, S., Pesteie, M., Qiao, Z., Shirazi-Adl, A., & Larivière, C. (2024). Machine learning applications in spine biomechanics. Journal of Biomechanics, 166, 111967-111967. External link
Ghiasi-Noughaby, A., Amiri, P., Kearney, R. E., & Mohebbi, A. (2024, July). Identification of the Human Postural Sway Response to Visual Inputs [Paper]. 46th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC 2024), Orlando, FL, USA. External link
Ghiasvand, S., Xie, W., & Mohebbi, A. (2024). Deep neural network-based robotic visual servoing for satellite target tracking. Frontiers in Robotics and AI, 11, 1469315 (13 pages). Available
Ghorbani, E., Dollon, Q., & Gosselin, F. (2024). Physics-aware tuning of the unscented Kalman filter: statistical framework for solving inverse problems involving nonlinear dynamical systems and missing data. Nonlinear Dynamics, 23 pages. External link
Gomes Braga, R., Varadharajan, V. S., Beltrame, G., & St-Onge, D. (2024, October). Swarming out of the lab : comparing relative localization methods for collective behavior [Paper]. 14th International Conference on Swarm Intelligence (ANTS 2024), Konstanz, Germany. External link
Gorges, C., Chéron, V., Chopra, A., Denner, F., & van Wachem, B. (2024). Correlations for aerodynamic force coefficients of non-spherical particles in compressible flows. International Journal of Multiphase Flow, 184, 105111 (20 pages). External link
Gorges, C., Denner, F., Chéron, V., & van Wachem, B. (2024). Correlations for aerodynamic force coefficients of non-spherical particles in compressible flows [Dataset]. External link
Haroun, M. (2024). Design Improvement, Implementation, and Numerical Modeling of a Self-Adaptive Perching Tool for UAVs [Master's thesis, Polytechnique Montréal]. Restricted access
He, F., Chen, Y., Wang, L., Li, S., & Huang, C. (2024). A multi-layer SPH method to simulate water-soil coupling interaction-based on a new wall boundary model. Engineering Analysis With Boundary Elements, 164, 105755 (32 pages). External link
He, F., Jiang, H., Lin, Y., Pan, J., Zhang, Y., & Huang, C. (2024). Multi-phase SPH-FDM and experimental investigations on the hydrodynamics of an oscillating water column wave energy device. Coastal Engineering, 192, 104569 (22 pages). External link
Hébert, A. (2024). A general formulation of the resonance spectrum expansion self-shielding method. Nuclear Science and Engineering, 2375908 (14 pages). Available
Herbinger, F. (2024). Surrogate-based Calibration Methods for Building Energy Models [Ph.D. thesis, Polytechnique Montréal]. Restricted access
Herbinger, F., & Kummert, M. (2024). Retraining surrogate models in increasingly restricted design spaces: a novel building energy model calibration method. Journal of Building Performance Simulation, 2346833 (18 pages). External link
Ho, M., Tucny, J.-M., Ammar, S., Leclaire, S., Reggio, M., & Trépanier, J.-Y. (2024). Lattice boltzmann model for rarefied gaseous mixture flows in three-dimensional porous media including knudsen diffusion. Fluids, 9(10), 237 (26 pages). Available
Inzirillo, F., Brighenti, A., Cammi, A., Graziano, L., Hébert, A., Marleau, G., Santandrea, S., & Vezzoni, B. (2024, April). Towards 2D reference deterministic calculations in support of industrial model verification and advanced reflector modeling setup [Paper]. 2024 International Conference on Physics of Reactors (PHYSOR 2024), San Francisco, CA, USA. External link
Jacquet, L. (2024). Développement d'un cadre d'interopérabilité pour une fabrication distribuée avec des logiciels libres : application au procédé de fabrication additive par dépôt de filament [Master's thesis, Polytechnique Montréal]. Restricted access
Jain, A. K., Denner, F., & van Wachem, B. (2024). Dispersion of particles in a sessile droplet evaporating on a heated substrate. International Journal of Multiphase Flow, 180, 104956 (19 pages). External link
Karimialavijeh, H., Chakraborty, A., Azzi, M., Proebstle, M., & Martin, É. (2024). Effect of precipitation hardening on the microstructure, mechanical, and corrosion properties of additively manufactured A20X aluminum alloy. Materials Science and Engineering: A, 913, 147033 (15 pages). External link
Karimialavijeh, H., Chakraborty, A., Proebstle, M., & Martin, É. (2024, January). Effect of Shot Peening on Fatigue Properties of A20X Fabricated by Laser Powder Bed Fusion [Paper]. Light Metal 2024 (TMS 2024). External link
Karimialavijeh, H., Chakraborty, A., Proebstle, M., Oishi, K., Harvey, J.-P., & Martin, É. (2024, January). Heat Treatment of A20X Alloy Manufactured Using Laser Powder Bed Fusion [Paper]. Light Metal 2024 (TMS 2024). External link
Kazemi, N., Akbari, S., Vidal, D., & Taghavi, S. M. (2024). Buoyant miscible viscoplastic displacements in vertical pipes: Flow regimes and their characterizations. Physics of Fluids, 36(1), 012119 (19 pages). External link
Khani, Z., Lefebvre, X., Brinkerhoff, J., & Patience, G. S. (2024). Single feed droplet–catalyst particle collision in a liquid containing gas–solid fluidized bed to convert fructose to value-added chemicals. Chemical Engineering Journal, 498, 155044 (14 pages). External link
Lakis, A. A., Esmaeilzadehazimi, M., & Toorani, M. (2024, August). Dynamic Analysis of Fluid-Filled Ring-Stiffened Conical Shells [Paper]. 10th World Congress on Mechanical, Chemical, and Material Engineering (MCM'24), Barcelona, Spain. Published in Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering. External link
Lamoureux, D. (2024). Kirigami Parachutes Flow-Induced Reconfiguration of Kirigami Mechanical Metamaterials [Master's thesis, Polytechnique Montréal]. Restricted access
Lamoureux, D., Audefroy, C., Labzour, O. T., Houde, S., & Gosselin, F. (2024). Evaluating flow-added damping on a hydrofoil by combining vibro-acoustics and doublet-lattice panel analyses. Flow, 4, 20 pages. External link
Lamoureux, D., Ramananarivo, S., Mélançon, D., & Gosselin, F. (2024). Simulating flow-induced reconfiguration by coupling corotational plate finite elements with a simplified pressure drag. Extreme Mechanics Letters, 74, 102271 (8 pages). External link
Larivière, C., Eskandari, A. H., Mecheri, H., Ghezelbash, F., Gagnon, D., & Shirazi-Adl, A. (2024). Effect of personalized spinal profile on its biomechanical response in an EMG-assisted optimization musculoskeletal model of the trunk. Journal of Biomechanics, 162, 111867 (10 pages). External link
Larivière, C., Ghezelbash, F., Eskandari, A. H., Gagnon, D., Mecheri, H., Arjmand, N., & Shirazi-Adl, A. (2024). Fusion et validation de modèles musculosquelettiques de la colonne lombaire pour la prévention et la réadaptation des travailleurs. (Technical Report n° RS-1191-fr). External link
Larson, A. N., Polly, D. W., Sponseller, P. D., Kelly, M. P., Richards, B. S., Garg, S., Parent, S., Shah, S. A., Weinstein, S. L., Crawford, C. H., Sanders, J. O., Blakemore, L. C., Oetgen, M. E., Fletcher, N. D., Kremers, W. K., Marks, M. C., Brearley, A. M., Aubin, C.-É., Sucato, D. J., ... Erickson, M. A. (2024). The Effect of Implant Density on Adolescent Idiopathic Scoliosis Fusion. Journal of Bone and Joint Surgery-American Volume, 106(3), 180-189. External link
Laurendeau, É., Blanchet, M., Zayni, M. K., Hann, R., Radenac, E., Mussa, I., & Pueyo, A. (2024, July). Summary From the 2nd AIAA Ice Prediction Workshop [Paper]. 2nd AIAA Ice Prediction Workshop, Las Vegas, Nevada. External link
Le Floc'h, A., Suryadi, A., Hu, N., Herr, M., Wang, S., Ghaemi, S., Vétel, J., Di Labbio, G., & Dufresne, L. (2024, June). Wall pressure signature of separated flows : a comparision between a flat plate and airfoil [Paper]. 13th International Symposium on Turbulence and Shear Flows Phenomena (TSFP 2024), Montreal, Qc, Canada (6 pages). External link
Lecompte, O., Achiche, S., & Mohebbi, A. (2024). A Review of Proprioceptive Feedback Strategies for Upper-Limb Myoelectric Prostheses. IEEE Transactions on Medical Robotics and Bionics, 3407532 (10 pages). External link
Lefebvre, È., Tawil, N., & Yahia, L. (2024). Transdermal delivery of cannabidiol for the management of acute inflammatory pain : a comprehensive review of the literature. International Journal of Molecular Sciences, 25(11), 5858 (20 pages). Available
Lefebvre, X., Succar, A., Bédard, É., Prévost, M., & Robert, É. (2024). Comparison of aerosol spectrometers: Accounting for evaporation and sampling losses. Measurement Science and Technology, 35(4), 15 pages. Available
Leroux, G., Gagnon, É., Birglen, L., & Leveque, N. (2024). Robotization of “in situ” acoustic measurements. The Journal of the Acoustical Society of America, 155(3_Suppleme), A282-A282. External link
Liétard, Y., Therriault, D., & Mélançon, D. (2024). Exploiting Geometric Frustration in Coupled von Mises Trusses to Program Multifunctional Mechanical Metamaterials. Advanced Engineering Materials. External link
Lingua, A., Sosa-Rey, F., Piccirelli, N., Therriault, D., & Lévesque, M. (2024). X-Ray Tomography-Based Characterization of the Porosity Evolution in Composites Manufactured by Fused Filament Fabrication. Experimental Mechanics. External link
Liu, L., & Vo, H. D. (2024). Attenuation of Inlet Distortion Effects on Fans Using Asymmetric Inlet Guide Vanes. Journal of Turbomachinery, 23-1096 (33 pages). External link
Ma, Y., Achiche, S., Pomey, M.-P., Paquette, J., Adjtoutah, N., Vicente, S., Engler, K., Laymouna, M., Lessard, D., Lemire, B., Asselah, J., Therrien, R., Osmanlliu, E., Zawati, M. H., Joly, Y., & Lebouché, B. (2024). Adapting and Evaluating an AI-Based Chatbot Through Patient and Stakeholder Engagement to Provide Information for Different Health Conditions: Master Protocol for an Adaptive Platform Trial (the MARVIN Chatbots Study). JMIR Research Protocols, 13, 54668. External link
Ma, Y., Achiche, S., Tu, G., Vicente, S., Lessard, D., Engler, K., Lemire, B., chatbots Patient Expert Committee, M. A. R. V. I. N., Laymouna, M., de Pokomandy, A., Cox, J., & Lebouché, B. (2024). The first AI-based Chatbot to promote HIV self-management: A mixed methods usability study. HIV Medicine, 13720 (23 pages). External link
Machach, S., Hébert, A., & Dall’Osso, A. (2024). Improvements to the Baff-Refl Equivalence Technique Applied to Reflector Models in PWRs. Nuclear Science and Engineering, 16 pages. External link
Macquet, Y. P. (2024). Modèle prédictif pour la distribution de taille de bulles dans une conduite verticale [Master's thesis, Polytechnique Montréal]. Restricted access
Maia De Souza, C. E. (2024). Development of Framework for Underwater Robotic Autonomy in Subsea oil & Gas Intervention [Ph.D. thesis, Polytechnique Montréal]. Restricted access
Malfajani, R. S., Damansabz, R., Bodkhe, S., Therriault, D., Laurin, J.-J., & Sharawi, M. S. (2024). 3D-printed encapsulated dielectric resonator antennas with large operation frequency ratio for future wireless communications. IEEE Open Journal of Antennas and Propagation, 14 pages. External link
Malmir, F., Di Labbio, G., Le Floc'h, A., Dufresne, L., Weiss, J., & Vétel, J. (2024). Low-frequency unsteadiness in laminar separation bubbles. Journal of Fluid Mechanics, 999, 1-40. External link
Mbaye, A., & Cimmino, M. (2022, September). Variable refrigerant flow heat pump model with estimated parameters and emulated controller based on manufacturer data [Paper]. 5th Building Performance Analysis Conference and SimBuild (2022), Chicago, Illinois (18 pages). Published in Science and Technology for the Built Environment, 30(4). Available
Mechter, M. A., Gadour, M., Romain, L., Tuysuz, O., & Brochu, M. (2024). Microstructural and fatigue characterization of 316L stainless steel subjected to flow drilling and tapping: comparison with machined threads. Engineering Failure Analysis, 164, 108730 (13 pages). Available
Mehrabian, M., Lakis, A. A., & Boukhili, R. (2024). Bolt-hole elongation of woven carbon-epoxy composite plates and joints using the digital image correlation technique. Journal of Composites Science, 8(5), 180 (17 pages). Available
Minnick, B. A., Viggiano, B., & Gayme, D. F. (2023, June). Augmented Restricted Nonlinear (ARNL) Model for High Reynolds Number Wall-Turbulence [Paper]. 10th Conference on Interdisciplinary Turbulence Initiative (iTi 2023), Bertinoro, Italy. External link
Mnich, D., Reuter, F., Denner, F., & Ohl, C.-D. (2024). Single cavitation bubble dynamics in a stagnation flow. Journal of Fluid Mechanics, 979, A18 (24 pages). Available
Mouret, T., Upreti, K., Dewart, F., Scola, A., Pons, A., Marchais, A., Eberling-Fux, N., Queva, A., & Turenne, S. (2024). 3D observations of room temperature capillary infiltration mechanism in SiC compacts. Ceramics International, 50(7), 11871-11883. External link
Musunuri, S. V. V. (2024). Need for an education model for adolescents, specifically in rural areas. Acta Astronautica, 219, 91-96. Available
Nemer, N. (2024). Caractérisation de l'impact de bulles d'air sur des fibres optiques dans un écoulement d'eau [Master's thesis, Polytechnique Montréal]. Restricted access
Ning, B., Londono, I., Laporte, C., & Villemure, I. (2024). Zoledronate reduces loading-induced microdamage in cortical ulna of ovariectomized rats. Journal of the Mechanical Behavior of Biomedical Materials, 150, 106350 (12 pages). External link
Noel, A., & Cimmino, M. (2022, December). Topology optimization of geothermal bore fields using the method of moving asymptotes [Paper]. International Ground Source Heat Pump Association Conference (IGSHPA 2022), Las Vegas, Nevada. Published in Science and Technology for the Built Environment, 30(3). Available
Paques, M. (2024). Impact of Vibratory Peening on the Fatigue Properties of the Ti-6Al-4V Titanium Alloy [Ph.D. thesis, Polytechnique Montréal]. Restricted access
Paques, M., Chakraborty, A., Changeux, B., Miao, H., Muhammad, W., Turenne, S., Inal, K., & Martin, É. (2024). Comparative assessment of Ti-6Al-4 V titanium alloy fatigue life improvement by vibratory peening, shot peening, and vibratory finishing. Fatigue & Fracture of Engineering Materials & Structures, 47(12), 14447 (19 pages). External link
Paz Pablo, E., Radenac, E., Blanchard, G., Peron, S., Laurendeau, É., & Villedieu, P. (2024, July). Immersed Boundary Methodology for 3D Multi-Step Ice Accretion Simulations [Paper]. AIAA Aviation Forum and ASCEND, Las Vegas, NV, USA. External link
Pedenon-Orlanducci, R., Zaydan, A., Achiche, S., & Saussié, D. (2024, January). A Hybrid Optimal Path Planner for Parafoiled Systems [Paper]. AIAA SCITECH 2024 Forum, Orlando, FL, USA. External link
Pierre, J., Verville, M., Chenier, G., Farahani, R. D., Piccirelli, N., Lévesque, M., & Therriault, D. (2024). Non-planar material-extrusion additive manufacturing of multifunctional sandwich structures using carbon-reinforced polyetheretherketone (PEEK). Additive Manufacturing, 84, 104124 (13 pages). External link
Pirbalouti, M. J. A., Altintaş, Y., & Mayer, J. R. R. (2024). Digital mapping of machine tool's volumetric and tracking errors left on the five axis tool paths. Precision Engineering-Journal of the International Societies for Precision Engineering and Nanotechnology, 88, 815-822. External link
Popovic, M. A., Lussier, B., Chizari, K., & Dumais, Y. (2024). Effect of pulp chamber access, instrumentation, obturation and restoration on the fracture resistance of endodontically treated canine teeth in dogs. Journal of Veterinary Dentistry, 11 pages. Available
Proulx-Cabana, V. (2024). Rapid Non-linear Computational Algorithms for Rotary-wing Aeroelasticity [Ph.D. thesis, Polytechnique Montréal]. Restricted access
Proulx-Cabana, V., Michon, G., & Laurendeau, É. Parametrization Effects of the Non-Linear Unsteady Vortex Method with Vortex Particle Method for Small Rotor Aerodynamics [Paper]. Unspecified (58 pages). Available
Qin, Y., Duan, S., Achiche, S., Zhang, Y., & Cao, Y. (2024). Advanced hybrid empirical mode decomposition, convolutional neural network and long short-term memory neural network approach for predicting grain pile humidity based on meteorological inputs. Journal of Stored Products Research, 109, 102427 (10 pages). External link
Rahimi, S. A., Baradaran, A., Khameneifar, F., Gore, G., & Issa, A. M. (2024). DECIDE-Twin: A Framework for AI-Enabled Digital Twins in Clinical Decision-Making. IEEE Journal of Biomedical and Health Informatics, 1-10. External link
Ranjbar, M., Beheshti, M. T. H., & Bolouki, S. (2024). Complex Laplacian approach for formation tracking without velocity measurements. International Journal of Systems Science, 2390170 (18 pages). External link
Razavi, S.-M., Arefizadeh, S., Bolouki, S., Haghifam, M.-R., & Shafie-Khah, M. (2024). P2P Trade With Prosumers' Actual Approximate Utility Functions Within Near-Potential Games Framework. IEEE Transactions on Smart Grid, 15(6), 5923-5938. Available
Rishmawi, S., Rodriguez, S., Chinesta, F., & Gosselin, F. (2024). Harmonic-modal hybrid frequency approach for parameterized non-linear. Computers & Structures, 301, 107461 (14 pages). External link
Rochefort-Beaudoin, T., Vadean, A., Achiche, S., & Aage, N. (2024). From density to geometry: Instance segmentation for reverse engineering of optimized structures. Engineering Applications of Artificial Intelligence, 141, 109732. External link
Romain, L., Mechter, M. A., Hervé, B., Macé, Y., & Brochu, M. (2024). Flow drilling and flow tapping as a mean to improve the fatigue life of specimens representing plate-type orthopedic implants. Engineering Failure Analysis, 109212-109212. External link
Rondeaux, E., Poubeau, A., Angelberger, C., Zuniga, M. M., Aubagnac-Karkar, D., & Paoli, R. (2024). Exploring the Potential and the Practical Usability of a Machine Learning Approach for Improving Wall Friction Predictions of RANS Wall Functions in Non-equilibrium Turbulent Flows. Flow Turbulence and Combustion, 26-26. External link
Sadallah, A. (2024). The Effect of High-Temperature Shot Peening on the Fatigue Life of 7010-T7452 Aluminum Alloy [Master's thesis, Polytechnique Montréal]. Restricted access
Sadallah, A., Miao, H., Changeux, B., Bitar-Nehme, E., Chakraborty, A., Turenne, S., & Martin, É. (2024, March). Effect of Shot Peening and High-Temperature Shot Peening on the High Cycle Fatigue of 7010-T7452 Aluminum Alloy [Paper]. Light Metals 2024 (TMS 2024), Orlando, FL, USA. External link
Saghaei, M., Fotsing, E. R., Ross, A., & Fradette, L. (2024). Production of monodisperse large drop emulsions by means of high internal phase pickering emulsions ─ processing and formulation. Industrial & Engineering Chemistry Research, 63(42), 17917-17929. Available
Saha, A., Kulkarni, N. D., & Kumari, P. (2024). Development of Bambusa tulda fiber-micro particle reinforced hybrid green composite: A sustainable solution for tomorrow's challenges in construction and building engineering. Construction and Building Materials, 441, 137486 (14 pages). External link
Saifan, A., Chen, S., Miao, H., Shen, Y., Yuan, L., Zhu, R., Zhai, M., Saleh, B., Zhao, S., Liu, Y., Liang, J., Zhang, C., & Yang, G. (2024). Data-driven modeling and optimization of a robotized multi-needle ultrasonic peen-forming process for 2024-T3 aluminum alloy. International Journal of Advanced Manufacturing Technology, 135, 827-849. External link
Salehi, P., Shirazi-Adl, A., & Ghezelbash, F. (2024). Biomechanics of the Human Knee Joint in Maximum Voluntary Isometric Flexion: Study of Changes in Applied Moment, Agonist–Antagonist Participations, Joint Center, and Flexion Angle. International Journal for Numerical Methods in Biomedical Engineering, 3874 (11 pages). External link
Sarite, M., Frayret, J.-M., Cimmino, M., & Delcroix, B. (2024, May). Hybrid Simulation of the Assessment of the Impact of External Interventions on Comfort and Occupant Behavior in Intelligent Buildings [Paper]. IISE Annual Conference and Expo, Montreal, QC, Canada (7 pages). Unavailable
Sauquet, H. (2024). Développement d'un nouveau matériau composite thermoplastique polyuréthane écoresponsable [Master's thesis, Polytechnique Montréal]. Restricted access
Savoldelli, J. M. (2024). In-Process Identification of Machine Tool Dynamics [Master's thesis, Polytechnique Montréal]. Restricted access
Schmidt, H., Shirazi-Adl, A., Bashkuev, M., Becker, L. A., Pumberger, M., Duda, G. N., & Reitmaier, S. (2024). Marked differences between continuous long-term and clinical snapshot examinations : is the current standard of back pain diagnostics outdated? Frontiers in Bioengineering and Biotechnology, 12, 1411958. Available
Sepahi-Boroujeni, S., & Khameneifar, F. (2024). Digital twin-enabled error and uncertainty mapping for 3D scanning. Precision Engineering, 88, 527-539. External link
Shan, X., & Birglen, L. (2024). Bistable Stopper Design and Force Prediction for Precision and Power Grasps of Soft Robotic Fingers for Industrial Manipulation. Journal of Mechanical Design, 146(4), MD-23-1495 (10 pages). External link
Succar, A., Prévost, M., Bédard, É., & Robert, É. (2024). Size and velocity of jet drops produced by bursting bubbles at the interface of a water jet. Physics of Fluids, 36(9), 092119 (21 pages). External link
Sushitskii, V., Dubois, P.-O., Miao, H., Lévesque, M., & Gosselin, F. (2024). Simulation and automation of aluminum panel shot peen forming. International Journal of Material Forming, 17(3), 21-21. External link
Sushitskii, V., Miao, H., Lévesque, M., & Gosselin, F. (2024). Segmentation of peen forming patterns using k-means clustering. Journal of Manufacturing Processes, 119, 867-877. External link
Theraroz, J., & Tuysuz, O. (2024, June). A General Analytical Approach to Predict Machining Process Damping [Paper]. ASME 2024 19th International Manufacturing Science and Engineering Conference, Knoxville, Tennessee, USA (5 pages). External link
Theraroz, J., & Tuysuz, O. (2024). A Generalized Machining Process Damping Model for Orthogonal Cutting. Journal of Manufacturing Science and Engineering, 1-40. External link
Theraroz, J., Tuysuz, O., & Schoop, J. (2024). An improved machining temperature prediction model for aerospace alloys: Effect of cutting edge radius and tool wear. Journal of Manufacturing Processes, 133, 1100-1100. External link
Thuel, J. (2024). Profilage du moyeu pour augmentation de la performance des compresseurs à écoulement mixte [Master's thesis, Polytechnique Montréal]. Restricted access
Toussaint, B., & Raison, M. (2024). Design of minimal model-free control structure for fast trajectory tracking of robotic arms. Applied Sciences, 14(18), 8405 (18 pages). Available
Tummalapalli, H., Hawkes, E. R., Savard, B., Park, J.-W., & Lu, T. (2024). Flame stabilisation in a highly-lifted premixed jet flame in a hot cross flow. Proceedings of the Combustion Institute, 40(1-4), 105452 (7 pages). External link
Vabre, M., Li, Z., Jella, S., Versailles, P., Bourque, G., Day, M., & Savard, B. (2024). DNS of ignition and flame stabilization in a simplified gas turbine premixer. Proceedings of the Combustion Institute, 40(1-4), 105701 (7 pages). External link
Vadcard, T., Thouverez, F., & Batailly, A. (2023, June). Computation of Isolated Periodic Solutions for Forced Response Blade-Tip/Casing Contact Problems [Paper]. Turbomachinery Technical Conference & Exposition (Turbo Expo 2023), Hynes Convention Center (11 pages). Published in Journal of Engineering for Gas Turbines and Power, 146(4). External link
Vadcard, T., Thouverez, F., & Batailly, A. (2024, June). Nonlinear Normal Modes-Related Isolated Branches of Subharmonic Solutions for Forced Response Blade-Tip/Casing Contact Problems [Paper]. ASME Turbo Expo 2024: Turbomachinery Technical Conference and Exposition, London, UK (12 pages). External link
Vadcard, T., Thouverez, F., & Batailly, A. (2024). Nonlinear Normal Modes-Related Isolated Branches of Subharmonic Solutions for Forced Response Blade-Tip/Casing Contact Problems. Journal of Engineering for Gas Turbines and Power, 1-12. External link
Vadcard, T., Thouverez, F., & Batailly, A. (2024). On the detection of nonlinear normal mode-related isolated branches of periodic solutions for high-dimensional nonlinear mechanical systems with frictionless contact interfaces. Computer Methods in Applied Mechanics and Engineering, 419, 116641 (31 pages). External link
Vasilevskiy, D., Turenne, S., & Masut, R. A. (2024). Self-contained calibration samples and measurements of the thermoelectric figure of merit: A method to improve accuracy. Journal of Applied Physics, 135(11), 0200082 (11 pages). External link
Vazeille, F., & Laberge Lebel, L. (2024). Envelope enrichment method for homogenization of non-periodic structures. Composite Structures, 329, 117819 (9 pages). External link
Vázquez Pelayo, A., Garcia-Mendoza, T., Becerril-Juarez, I., Juarez-Arellano, E. A., Mireles, K., & Avalos-Borja, M. (2024). Mechanosynthesis of TaC-WC powders under environmental conditions and their consolidation via electric arc furnace. Materials Research Express, 11(6), 065601 (17 pages). Available
Vázquez-Pelayo, A., Becerril-Juarez, I. G., Mireles, L. K., Flores-Zúñiga, H., & Avalos-Borja, M. (2024). TaC-WC synthesis by a new approach of mechanical milling and low-temperature spark plasma sintering. Materials Today Communications, 38, 11-11. External link
Viggiano, B., Basset, T., Bourgoin, M., Cal, R. B., Chevillard, L., Meneveau, C., & Volk, R. (2024). Lagrangian modeling of a nonhomogeneous turbulent shear flow: Molding homogeneous and isotropic trajectories into a jet. Physical Review Fluids, 9(4), 044604 (13 pages). External link
Viggiano, B., Camobreco, C. J., Wong, J., Luhar, M., García-Mayoral, R., Chung, D., & Gayme, D. (2023, May). The role of nonlinear interactions in the onset of drag increase in flow over riblets [Paper]. 5th Madrid Summer School on Turbulence Workshop, Madrid, Spain (15 pages). Published in Journal of Physics : Conference Series, 2753. External link
Viggiano, B., Gish, K., Solovitz, S. A., & Cal, R. B. (2024). Inertial particle clustering due to turbulence in an air jet. International Journal of Multiphase Flow, 174, 104734 (12 pages). Available
Villié, A., Vanzulli, M. C., Zerpa, J. M. P., Vétel, J., Étienne, S., & Gosselin, F. (2024). Modeling vortex-induced vibrations of branched structures by coupling a 3D-corotational frame finite element formulation with wake-oscillators. Journal of Fluids and Structures, 125, 104074 (22 pages). External link
Viviescas, G., & Bernier, M. (2024). A variable speed water-to-water heat pump model used for ground-source applications. Science and Technology for the Built Environment, 30(3), 266-279. Available
Viviescas, G., & Bernier, M. (2024). A water-to-water heat pump model with experimental validation. Energies, 17(8), 1858 (29 pages). Available
Wang, M., Zhao, S., Shi, C., Guyot, M.-C., Liao, M., Tauer, J. T., Willie, B. M., Cobetto, N., Aubin, C.-É., Küster-Schöck, E. D., Drapeau, P., Zhang, J., Wu, N., & Kibar, Z. (2024). Planar cell polarity zebrafish models of congenital scoliosis reveal novel underlying defects in notochord morphogenesis. Development. External link
Wang, X. J., Huang, C., Yan, W., Aly, A. M., Zhao, Q., & He, G. (2024). Study on hydrodynamic characteristics of multiple fish based on smoothed particle hydrodynamics. Physics of Fluids, 36(11), -. External link
Wawrzyniak, N., Wanjara, P., Brochu, M., & Brochu, M. (2024). Measuring the tensile properties of Ti6Al4V fabricated by laser powder bed fusion: Influence of specimen dimensions. Theoretical and Applied Fracture Mechanics, 131, 104419 (10 pages). External link
Wu, Y., Azzi, M., Khelfaoui, F., Vernhes, L., Martinu, L., & Sapieha, J.-E. (2024). Static and dynamic friction and wear of cobalt-based coatings at elevated temperatures. Tribology International, 200, 110126 (13 pages). External link
Xing, K., Mayer, J. R. R., Bonev, I. A., Champliaud, H., & Liu, Z. (2024). Evaluation of the Positioning Accuracy Along Helical Paths Using a Telescoping Ballbar. ASME Letters in Dynamic Systems and Control, 4(1). External link
Yahiaoui, H., Lakis, A. A., & Toorani, M. (2024). Hybrid finite element theory in dynamic analysis of an imperfect plate. Mechanics Research Communications, 141, 104324 (15 pages). External link
Yang, B. (2024). Bridging Macro-scale Experimental and Dual-scale Virtual Testing for Permeability of Textile Reinforcements With Digital Material Twins [Ph.D. thesis, Polytechnique Montréal]. Restricted access
Yang, B., Béguin, C., Causse, P., & Wang, J. (2024). PolyTex: A parametric textile geometry modeling package [Dataset]. External link
Yang, Y., Read, H., Sbai, M., Zareei, A., Forte, A. E., Mélançon, D., & Bertoldi, K. (2024). Complex Deformation in Soft Cylindrical Structures via Programmable Sequential Instabilities. Advanced Materials, 202406611 (6 pages). External link
Zayni, M. K., Blanchet, M., & Laurendeau, É. (2024, July). Lagrangian Particle Tracking for Ice Accretion Applications [Paper]. 2024 AIAA Aviation Forum and Ascend, Las Vegas, Nevada, USA. External link
Zhang, C., Wang, C.-S., Girard, M., Therriault, D., & Heuzey, M.-C. (2024). 3D printed protein/polysaccharide food simulant for dysphagia diet: Impact of cellulose nanocrystals. Food Hydrocolloids, 148(A), 109455 (15 pages). External link
Zhuang, T., & Mayer, J. R. R. (2023, October). Prediction of machine tool's static translational volumetric error caused by compliance from feed motor torque [Paper]. 11th CIRP Global Web Conference (CIRPe 2023). Published in Procedia CIRP, 121. External link
Zindashti, N. J., Rahmati, Z., Mohebbi, A., & Behzadipour, S. (2024). A neuromechanical model characterizing the motor planning and posture control in the voluntary lean in Parkinson's disease. Journal of Neuroengineering and Rehabilitation, 21(1), 25 (12 pages). Available
