 | Monter d'un niveau |
Philippe A. TanguyDépartement de génie chimique
Voir sa fiche dans le Répertoire des Expertises de Polytechnique Montréal
Réseau de collaborationCe graphique trace les liens entre tous les collaborateurs des publications de {} figurant sur cette page.
Chaque lien représente une collaboration sur la même publication. L'épaisseur du lien représente le nombre de collaborations.
Utilisez la molette de la souris ou les gestes de défilement pour zoomer à l'intérieur du graphique.
Vous pouvez cliquer sur les noeuds et les liens pour les mettre en surbrillance et déplacer les noeuds en les glissant.
Enfoncez la touche "Ctrl" ou la touche "⌘" en cliquant sur les noeuds pour ouvrir la liste des publications de cette personne.
Sharifian, S., Sotudeh-Gharebagh, R., Zarghami, R., Tanguy, P. A., & Mostoufi, N. (2021). Uncertainty in chemical process systems engineering: a critical review. Reviews in Chemical Engineering, 37(6), 687-714. Lien externe
Guntzburger, Y., Pauchant, T. C., & Tanguy, P. A. (2018). Empowering Engineering Students in Ethical Risk Management: An Experimental Study. Science and Engineering Ethics, 25(3), 911-937. Lien externe
Guntzburger, Y., Pauchant, T. C., & Tanguy, P. A. (2017). Ethical Risk Management Education in Engineering: A Systematic Review. Science and Engineering Ethics, 23(2), 323-350. Lien externe
Burkhardt, J., Patyk, A., Tanguy, P. A., & Retzke, C. (2016). Hydrogen mobility from wind energy : A life cycle assessment focusing on the fuel supply. Applied Energy, 181, 54-64. Lien externe
Burkhardt, J., Patyk, A., Tanguy, P. A., & Retzke, C. (2016). Wasserstoffmobilität im Kontext der Energiewende : Zum Stand der Technik und ihren Umweltauswirkungen. gwf-Gas + Energie, 160-164. Lien externe
Dommange, X., Tanguy, P. A., & Jolicoeur, M. (2015). Feasibility of lipid mechanical extraction from viable monoraphidium minutum. Microalgae Biotechnology, 1(1), 12-19. Lien externe
Wang, X., Farhat, M., Fradette, L., & Tanguy, P. A. (2014). Analysis of power consumption in multishaft mixers. Industrial and Engineering Chemistry Research, 53(16), 6730-6737. Lien externe
Mendez-Portillo, L. S., Dubois, C., & Tanguy, P. A. (2014). Free-radical polymerization of styrene using a split-and-recombination (SAR) and multilamination microreactors. Chemical Engineering Journal, 256, 212-221. Lien externe
Stobiac, V., Tanguy, P. A., & Bertrand, F. (2014). Investigation of the accuracy of the extrapolation method for the lattice Boltzmann simulation of viscous fluid flow in a Maxblend impeller system. Computers and Chemical Engineering, 60, 112-123. Lien externe
Stobiac, V., Fradette, L., Tanguy, P. A., & Bertrand, F. (2014). Pumping characterisation of the maxblend impeller for Newtonian and strongly non-Newtonian fluids. Canadian Journal of Chemical Engineering, 92(4), 729-741. Lien externe
Stobiac, V., Tanguy, P. A., & Bertrand, F. (2013). Boundary conditions for the lattice Boltzmann method in the case of viscous mixing flows. Computers and Fluids, 73, 145-161. Lien externe
Mendez-Portillo, L. S., Heniche, M., Dubois, C., & Tanguy, P. A. (2013). Numerical investigation of the hydrodynamics of split-and-recombination and multilamination microreactors. AICHE Journal, 59(3), 988-1001. Lien externe
Tanguy, P. A., Thibault, F., Ascanio, G., & La Fuente, E. B.-D. (2012). Solid-liquid mixing: Numerical simulation and physical experiments. Dans Lee, S., & Kimberly H., H. (édit.), Particle Technology and Applications (p. 157-179). Lien externe
Jafari, R., Tanguy, P. A., & Chaouki, J. (2012). Characterization of minimum impeller speed for suspension of solids in liquid at high solid concentration, using gamma-ray densitometry. International Journal of Chemical Engineering, 2012, 1-15. Disponible
Méndez-Portillo, L. S., Fradette, L., Dubois, C., & Tanguy, P. A. (2012). Characterization of the hydrodynamics and mixing performance of a split-and-recombination (SAR) prototype microreactor and a multilamination commercial microreactor. Industrial and Engineering Chemistry Research, 51(2), 994-1005. Lien externe
Jafari, R., Chaouki, J., & Tanguy, P. A. (2012). A Comprehensive Review of Just Suspended Speed in Liquid-Solid and Gas-Liquid-Solid Stirred Tank Reactors. International Journal of Chemical Reactor Engineering, 10(1). Lien externe
Wang, X., Fradette, L., Takenaka, K., & Tanguy, P. A. (2012). Effect of operating parameters on the mixing performance of the superblend coaxial mixer. Industrial and Engineering Chemistry Research, 51(4), 1826-1833. Lien externe
Brito-Bazan, M., Fradette, L., & Tanguy, P. A. (2012). Experimental flow visualization and residence time distributions in a Co-Kneader. International Polymer Processing, 27(4), 414-426. Lien externe
Jafari, R., Tanguy, P. A., & Chaouki, J. (2012). Experimental Investigation on Solid Dispersion, Power Consumption and Scale-up in Moderate to Dense Solid-Liquid Suspensions. Chemical Engineering Research & Design, 90(2), 201-212. Lien externe
Hidalgo-Millán, A., Zenit, R., Palacios, C., Yatomi, R., Horiguchi, H., Tanguy, P. A., & Ascanio, G. (2012). On the hydrodynamics characterization of the straight Maxblend impeller with Newtonian fluids. Chemical Engineering Research and Design, 90(9), 1117-1128. Lien externe
Rivera, C. A., Heniche, M., Bertrand, F., Glowinski, R., & Tanguy, P. A. (2012). A parallel finite element sliding mesh technique for the simulation of viscous flows in agitated tanks. International Journal for Numerical Methods in Fluids, 69(3), 653-670. Lien externe
Sanjuan-Galindo, R., Heniche, M., Ascanio, G., & Tanguy, P. A. (2011). CFD investigation of new helical ribbon mixers bottom shapes to improve pumping. Asia-Pacific Journal of Chemical Engineering, 6(1), 181-193. Lien externe
Bagué, A., Heniche, M., Fradette, L., Tanguy, P. A., & Takenaka, K. (septembre 2011). Effect of speed ratio on power consumption in a superblend miser - a numerical study [Communication écrite]. ISMIP VII, Beijing, China. Non disponible
Stobiac, V., Tanguy, P. A., & Bertrand, F. (juillet 2011). Lattice boltzmann simulation of industrial viscous mixing flows [Communication écrite]. 2011 High-Performance Computing Symposium, Montréal, Québec. Non disponible
Stobiac, V., Tanguy, P. A., & Bertrand, F. (juillet 2011). Lattice boltzmann simulation of industrial viscous mixing flows [Communication écrite]. 8th International Conference on Mesoscopic Methods in Engineering and Science, Lyon, France. Non disponible
Stobiac, V., Tanguy, P. A., & Bertrand, F. (juillet 2010). Boundary conditions for the Lattice Boltzmann simulation of industrial viscous mixing flows [Communication écrite]. 7th International Conference for Mesoscopic Methods in Engineering and Science, Edmonton, Canada. Non disponible
Stobiac, V., Chrétien, I., Bonniol, F., Tanguy, P. A., Chaouki, J., & Bertrand, F. (octobre 2010). Efficient modeling paradigms for the simulation of industrial mixing flows [Communication écrite]. 13th Asia Pacific Confederation of Chemical Engineering Congress, Taipei, Taiwan. Non disponible
Cagnone, J.-S., Heniche, M., & Tanguy, P. A. (2010). A Low Cost Implementation of the Phillips Model in Solid-Liquid Flow Modeling. International Journal for Numerical Methods in Fluids, 64(7), 812-826. Lien externe
Rivera, C. A., Heniche, M., Glowinski, R., & Tanguy, P. A. (2010). Parallel Finite Element Simulations of Incompressible Viscous Fluid Flow by Domain Decomposition With Lagrange Multipliers. Journal of Computational Physics, 229(13), 5123-5143. Lien externe
Giguère, R., Fradette, L., Mignon, D., & Tanguy, P. A. (2009). Analysis of slurry flow regimes downstream of a pipe bend. Chemical Engineering Research and Design, 87(7), 943-950. Lien externe
Fournier, C.-O., Fradette, L., & Tanguy, P. A. (avril 2009). Effect of dispersed phase viscosity on solid-stabilized emulsions [Communication écrite]. 13th European Conference on Mixing : New developments towards more efficient and sustainable operations, King's College London, UK. Publié dans Chemical Engineering Research and Design, 87(4). Lien externe
Guntzburger, Y., Fradette, L., Farhat, M., Heniche, M., Tanguy, P. A., & Takenaka, K. (2009). Effect of the geometry on the performance of the Maxblend impeller with viscous Newtonian fluids. Asia-Pacific Journal of Chemical Engineering, 4(5), 528-536. Lien externe
Khopkar, A. R., Fradette, L., & Tanguy, P. A. (2009). Emulsification capability of a dual shaft mixer. Chemical Engineering Research and Design, 87(12), 1631-1639. Lien externe
Jafari, R., Tanguy, P. A., & Chaouki, J. (août 2009). Evaluation of scale-up procedures for G_L contacting in mechanically agitated vessels [Communication écrite]. 8th World Congress of Chemical Engineering, Montréal, Québec. Non disponible
Farhat, M., Fradette, L., Horiguchi, H., Yatomi, R., & Tanguy, P. A. (2009). Experimental investigation of superblend coaxial mixer. Journal of Chemical Engineering of Japan, 42(11), 797-803. Lien externe
Rivera, C. A., Heniche, M., Takenaka, K., & Tanguy, P. A. (2009). Finite element modeling of the laminar and transition flow of the Superblend dual shaft coaxial mixer on parallel computers. Chemical Engineering Science, 64(21), 4442-4456. Lien externe
Lecuyer, H. A., Mmbaga, J. P., Hayes, R. E., Bertrand, F., & Tanguy, P. A. (2009). Modelling of forward roll coating flows with a deformable roll: application to non-Newtonian industrial coating formulations. Computers and Chemical Engineering, 33(9), 1427-1437. Lien externe
Jafari, R., Tanguy, P. A., & Chaouki, J. (août 2009). New method for characterization of critical impeller speed for solid suspension in mechanically agitated vessels at high solid concentration [Communication écrite]. 8th World Congress of Chemical Engineering, Montréal, Québec. Non disponible
Devals, C., Heniche, M., Takenaka, K., & Tanguy, P. A. (2008). Cfd Analysis of Several Design Parameters Affecting the Performance of the Maxblend Impeller. Computers & Chemical Engineering, 32(8), 1831-1841. Lien externe
Khopkar, A. R., & Tanguy, P. A. (2008). Cfd Simulation of Gas-Liquid Flows in Stirred Vessel Equipped With Dual Rushton Turbines: Influence of Parallel, Merging and Diverging Flow Configurations. Chemical Engineering Science, 63(14), 3810-3820. Lien externe
Giguère, R., Fradette, L., Mignon, D., & Tanguy, P. A. (2008). Characterization of Slurry Flow Regime Transitions by ERT. Chemical Engineering Research & Design, 86(9A), 989-996. Lien externe
Cabaret, F., Fradette, L., & Tanguy, P. A. (2008). Effect of shaft eccentricity on the laminar mixing performance of a radial impeller. Canadian Journal of Chemical Engineering, 86(6), 971-977. Lien externe
Giguère, R., Fradette, L., Mignon, D., & Tanguy, P. A. (2008). ERT Algorithms for Quantitative Concentration Measurement of Multiphase Flows. Chemical Engineering Journal, 141(1-3), 305-317. Lien externe
Tanguy, P. A., Farhat, M., Fradette, L., Horiguchi, H., & Yatomi, R. (octobre 2008). Experimental investigation of the superblend coaxial mixer [Communication écrite]. 2nd Asian Conference on Mixing, Yonezawa, Japan. Non disponible
Coesnon, B., Heniche, M., Devals, C., Bertrand, F., & Tanguy, P. A. (2008). A Fast and Robust Fictitious Domain Method for Modelling Viscous Flows in Complex Mixers: the Example of Propellant Make-Down. International Journal for Numerical Methods in Fluids, 58(4), 427-449. Lien externe
Cabaret, F., Fradette, L., & Tanguy, P. A. (2008). Gas-Liquid Mass Transfer in Unbaffled Dual-Impeller Mixers. Chemical Engineering Science, 63(6), 1636-1647. Lien externe
Stobiac, V., Heniche, M., Devals, C., Bertrand, F., & Tanguy, P. A. (octobre 2008). A mapping method based on gaussian quadrature : application to viscous mixing [Communication écrite]. 6th International Symposium on Mixing in Industrial Processes (ISMIP 6), Niagara-on-the-lake, Ontario, Canada. Non disponible
Stobiac, V., Heniche, M., Devals, C., Bertrand, F., & Tanguy, P. A. (2008). A mapping method based on Gaussian quadrature: Application to viscous mixing. Chemical Engineering Research & Design, 86(12), 1410-1422. Lien externe
Ascanio, G., Taboada, B., & Tanguy, P. A. (2008). Misting Droplet Size Analysis in a Metered Film Coater. Chemical Engineering Research & Design, 86(A2), 215-218. Lien externe
Cabaret, F., Fradette, L., & Tanguy, P. A. (2008). New turbine impellers for viscous mixing. Chemical Engineering and Technology, 31(12), 1806-1815. Lien externe
Farhat, M., Fradette, L., & Tanguy, P. A. (2008). Revisiting the Performance of a Coaxial Mixer. Industrial & Engineering Chemistry Research, 47(10), 3562-3567. Lien externe
Ascanio, G., Guerrero, C., & Tanguy, P. A. (2008). Rheological effects on forward deformable roll coating. Journal of Chemical Engineering of Japan, 41(4), 217-226. Lien externe
Tanguy, P. A., Heniche, M., Fradette, L., & Jaffar, S. A. (2008). Simulation of static mixers. Dans Mixing and compounding of polymers (2e éd.). Lien externe
Tanguy, P. A., Fradette, L., & Fournier, C.-O. (2008). Stable emulsion and process of preparation thereof. (Demande de brevet no US20080249194). Lien externe
Fradette, L., & Tanguy, P. A. (2007). Accent on applications - Measuring and imporving mixing times with image analysis. Optical techniques gauge champagne bubble stability. Studying engines in action. Photonics Spectra, 41(8), 28-32. Non disponible
Fradette, L., Tanguy, P. A., Bertrand, F., Thibault, F., Ritz, J.-B., & Giraud, É. (2007). CFD Phenomenological Model of Solid-Liquid Mixing in Stirred Vessels. Computers & Chemical Engineering, 31(4), 334-345. Lien externe
Bonnot, S., Cabaret, F., Fradette, L., & Tanguy, P. A. (2007). Characterization of Mixing Patterns in a Coaxial Mixer. Chemical Engineering Research & Design, 85(A8), 1129-1135. Lien externe
Fradette, L., Brocart, B., & Tanguy, P. A. (2007). Comparison of mixing technologies for the production of concentrated emulsions. Chemical Engineering Research & Design, 85(A11), 1553-1560. Lien externe
Gingras, J.-P., Fradette, L., Tanguy, P. A., & Jorda, E. (2007). Concentrated Bitumen-in-Water Emulsification in Coaxial Mixers. Industrial & Engineering Chemistry Research, 46(6), 1818-1825. Lien externe
Coesnon, B., Heniche, M., Stobiac, V., Bertrand, F., & Tanguy, P. A. (juillet 2007). A fast and robust fictitious domain method for modeling propellant flow in a three-blade planetary mixer [Communication écrite]. 6th International Congress on Industrial and Applied Mathematics (ICIAM), Zurich, Switzerland. Non disponible
Iranshahi, A., Devals, C., Heniche, M., Fradette, L., Tanguy, P. A., & Takenaka, K. (2007). Hydrodynamics Characterization of the Maxblend Impeller. Chemical Engineering Science, 62(14), 3641-3653. Lien externe
Khopkar, A. R., Fradette, L., & Tanguy, P. A. (2007). Hydrodynamics of a Dual Shaft Mixer With Newtonian and Non-Newtonian Fluids. Chemical Engineering Research & Design, 85(A6), 863-871. Lien externe
Cabaret, F., Rivera, C., Fradette, L., Heniche, M., & Tanguy, P. A. (2007). Hydrodynamics Performance of a Dual Shaft Mixer With Viscous Newtonian Liquids. Chemical Engineering Research & Design, 85(A5), 583-590. Lien externe
Gingras, J.-P., Fradette, L., Tanguy, P. A., & Bousquet, J. (2007). Inline Bitumen Emulsification Using Static Mixers. Industrial & Engineering Chemistry Research, 46(8), 2618-2627. Lien externe
Pour, S. B., Fradette, L., & Tanguy, P. A. (2007). Laminar and Slurry Blending Characteristics of a Dual Shaft Impeller System. Chemical Engineering Research & Design, 85(A9), 1305-1313. Lien externe
Fradette, L., Tanguy, P. A., Li, H. Z., & Choplin, L. (2007). Liquid/Liquid Viscous Dispersions With a SMX Static Mixer. Chemical Engineering Research & Design, 85(A3), 395-405. Lien externe
Yatomi, R., Takenaka, K., Takahashi, K., & Tanguy, P. A. (2007). Mass Transfer Characteristics by Surface Aeration of Large Paddle Impeller: Application to a Polymerization Reactor With Liquid Level Change. Journal of Chemical Engineering of Japan, 40(5), 393-397. Lien externe
Cabaret, F., Bonnot, S., Fradette, L., & Tanguy, P. A. (2007). Mixing time analysis using colorimetric methods and image processing. Industrial and Engineering Chemistry Research, 46(14), 5032-5042. Lien externe
Farhat, M., Rivera Aparicio, C. A., Fradette, L., Heniche, M., & Tanguy, P. A. (2007). Numerical and Experimental Study of a Dual-Shaft Coaxial Mixer With Viscous Fluids. Industrial & Engineering Chemistry Research, 46(14), 5021-5031. Lien externe
Fradette, L., Thomé, G., Tanguy, P. A., & Takenaka, K. (2007). Power and Mixing Time Study Involving a Maxblend (R) Impeller With Viscous Newtonian and Non-Newtonian Fluids. Chemical Engineering Research & Design, 85(A11), 1514-1523. Lien externe
Pour, S. B., Norca, G. B., Fradette, L., Legros, R., & Tanguy, P. A. (2007). Solid-liquid and liquid-liquid mixing laboratory for chemical engineering undergraduates. Chemical Engineering Education, 41(2), 101-106. Lien externe
Devals, C., Heniche, M., Bertrand, F., Tanguy, P. A., & Hayes, R. E. (2007). A Two-Phase Flow Interface Capturing Finite Element Method. International Journal for Numerical Methods in Fluids, 53(5), 735-751. Lien externe
Barailler, F., Heniche, M., & Tanguy, P. A. (2006). Cfd Analysis of a Rotor-Stator Mixer With Viscous Fluids. Chemical Engineering Science, 61(9), 2888-2894. Lien externe
Cabaret, F., Fradette, L., & Tanguy, P. A. (juin 2023). Characterization of macro-mixing kinetics using advanced image analysis [Communication écrite]. XII European Conference on Mixing, Bologna, Italy. Non disponible
Tanguy, P. A. (octobre 2006). Complex mixing in coaxial multiple shaft stirred tanks - A review [Communication écrite]. 22nd Interamerican Congress of Chemical Engineering (CIIQ 2006) and 5th Argentinian Congress of Chemical Engineering (CAIQ 2006), Buenos Aires, Argentina. Non disponible
Lécuyer, H. A., Bertrand, F., Tanguy, P. A., Mmbaga, J. P., & Hayes, R. E. (janvier 2006). Computer Modelling of Deformable non-Newtonian Flow Using Comsol Multiphysics [Communication écrite]. COMSOL User Conference, Las Vegas, USA. Non disponible
Sosa, A., Carreau, P., Tanguy, P. A., Ascanio, G., & Guerrero, C. (2006). The effect of thickener on the rheology of coating colors. Chemical Engineering Communications, 193(8), 917-928. Lien externe
Fradette, L., Li, H. Z., Choplin, L., & Tanguy, P. A. (2006). Gas/Liquid Dispersions With a Smx Static Mixer in the Laminar Regime. Chemical Engineering Science, 61(11), 3506-3518. Lien externe
Ascanio, G., Carreau, P., & Tanguy, P. A. (2006). High-Speed Roll Coating With Complex Rheology Fluids. Experiments in Fluids, 40(1), 1-14. Lien externe
Ouzineb, K., Lord, C., Lesauze, N., Graillat, C., Tanguy, P. A., & McKenna, T. (2006). Homogenisation Devices for the Production of Miniemulsions. Chemical Engineering Science, 61(9), 2994-3000. Lien externe
Rivera Aparicio, C. A., Foucault, S., Heniche, M., Espinosa-Solares, T., & Tanguy, P. A. (2006). Mixing Analysis in a Coaxial Mixer. Chemical Engineering Science, 61(9), 2895-2907. Lien externe
Cabaret, F., Rivera, C. A., Heniche, M., Fradette, L., & Tanguy, P. A. (juin 2023). Mixing performance of dual eccentric turbines in stirred tanks [Communication écrite]. XII European Conference on Mixing, Bologna, Italy. Non disponible
Foucault, S., Ascanio, G., & Tanguy, P. A. (2006). Mixing Times in Coaxial Mixers With Newtonian and Non-Newtonian Fluids. Industrial & Engineering Chemistry Research, 45(1), 352-359. Lien externe
Heniche, M., & Tanguy, P. A. (2006). A new element-by-element method for trajectory calculations with tetrahedral finite element meshes. International Journal for Numerical Methods in Engineering, 67(9), 1290-317. Lien externe
Ascanio, G., Brito-Bazán, M., & Tanguy, P. A. (2006). A Non-Conventional Approach for the Make-Down of Concentrated Suspensions. Chemical Engineering & Technology, 29(8), 968-973. Lien externe
Farhat, M., Rivera, C. A., Fradette, L., Heniche, M., & Tanguy, P. A. (juin 2023). Numerical and experimental study of coaxial mixers for viscous Newtonian and non-Newtonian fluids [Communication écrite]. XII European Conference on Mixing, Bologna, Italy. Non disponible
Iranshahi, A., Heniche, M., Bertrand, F., & Tanguy, P. A. (2006). Numerical Investigation of the Mixing Efficiency of the Ekato Paravisc Impeller. Chemical Engineering Science, 61(8), 2609-2617. Lien externe
Cabaret, F., Rivera, C. A., Heniche, M., Fradette, L., & Tanguy, P. A. (juin 2023). Performance of Dual Shaft Mixing System in Viscous Newtonian Liquids Mixing [Communication écrite]. XII European Conference on Mixing, Bologna, Italy. Non disponible
Tanguy, P. A., Thibault, F., Ascanio, G., & Brito-De La Fuente, E. (2006). Solid-Liquid Mixing : Numerical simulation and Physical Experiments. Dans Lee, S. (édit.), Encyclopedia of chemical processing (p. 2753-2768). Lien externe
Giguere, R., Bertrand, F., & Tanguy, P. A. (2006). A Three-Dimensional Mesh Refinement Strategy for the Simulation of Fluid Flow With a Fictitious Domain Method. Computers & Chemical Engineering, 30(3), 453-466. Lien externe
Ascanio, G., & Tanguy, P. A. (octobre 2006). Visualization of flow patterns in stirred vessels with eccentric impeller [Communication écrite]. 22nd Interamerican Congress of Chemical Engineering (CIIQ 2006) and 5th Argentinian Congress of Chemical Engineering (CAIQ 2006), Buenos Aires, Argentina. Non disponible
Tanguy, P. A., Bertrand, J., & Xuereb, C. (2005). Book review [Commentaire ou lettre]. Chemical Engineering Science, 60(8-9), 2533-2533. Lien externe
Ascanio, G., Foucault, S., Heniche, M., Rivera, C., & Tanguy, P. A. (2005). Chaotic mixing in stirred vessels : a new strategy to enhance homogeneity. Ingenieria mecanica - Tecnologia y Desarollo, 1, 209-214. Lien externe
Gentric, C., Mignon, D., Bousquet, J., & Tanguy, P. A. (2005). Comparison of Mixing in Two Industrial Gas-Liquid Reactors Using Cfd Simulations. Chemical Engineering Science, 60(8-9), 2253-2272. Lien externe
Gingras, J. P., Tanguy, P. A., Mariotti, S., & Chaverot, P. (2005). Effect of Process Parameters on Bitumen Emulsions. Chemical Engineering and Processing, 44(9), 979-986. Lien externe
Ascanio, G., Carreau, P., Reglat, O., & Tanguy, P. A. (2005). Extensional Rheology of Coating Suspensions in Relation With Misting in Film Coaters. Nordic Pulp & Paper Research Journal, 20(1), 48-53. Lien externe
Devals, C., Heniche, M., Bertrand, F., Hayes, R. E., & Tanguy, P. A. (2005). A finite element strategy for the solution of interface tracking problems. International Journal for Numerical Methods in Fluids, 49(12), 1305-1327. Lien externe
Mmbaga, J. P., Hayes, R. E., Bertrand, F., & Tanguy, P. A. (2005). Flow Simulation in the Nip of a Rigid Forward Roll Coater. International Journal for Numerical Methods in Fluids, 48(10), 1041-1066. Lien externe
Doucet, L., Ascanio, G., & Tanguy, P. A. (2005). Hydrodynamics Characterization of Rotor-Stator Mixer With Viscous Fluids. Chemical Engineering Research & Design, 83(A10), 1186-1195. Lien externe
Arzate, A., & Tanguy, P. A. (2005). Hydrodynamics of liquid jet application in high-speed jet coating: Newtonian and shear-thinning fluids. Chemical Engineering Research & Design, 83(2 A), 111-125. Lien externe
Tanguy, P. A., Bertrand, J., & Xuereb, C. (2005). Innovative Studies in Industrial Mixing Processes. Chemical Engineering Science, 60(8-9), 2099-2099. Lien externe
Ascanio, G., & Tanguy, P. A. (2005). Mixing of shear-thinning fluids with dual off-centred impellers. Canadian Journal of Chemical Engineering, 83(3), 393-400. Lien externe
Iranshahi, A., Heniche, M., Tanguy, P. A., & Bertrand, F. (janvier 2005). Numerical comparison of the flow characteristics of the Ekato PARAVISC with conventional viscous mixing impellers [Communication écrite]. 55th CSChE Annual Conference, Toronto, ON, Canada. Non disponible
Heniche, M., Tanguy, P. A., Reeder, M. F., & Fasano, J. B. (2005). Numerical investigation of blade shape in static mixing. AICHE Journal, 51(1), 44-58. Lien externe
Lécuyer, H., Mmbaga, J., Bertrand, F., Tanguy, P. A., & Hayes, R. E. (janvier 2005). Numerical investigation of non-newtonian coating flows in high speed forward deformable roll coaters [Communication écrite]. 55th CSChE Annual Conference, Toronto, ON, Canada. Non disponible
Foucault, S., Ascanio, G., & Tanguy, P. A. (2005). Power characteristics in coaxial mixing: Newtonian and non-newtonian fluids. Industrial and Engineering Chemistry Research, 44(14), 5036-5043. Lien externe
Manski, S. S., Mmbaga, J. P., Hayes, R. E., Bertrand, F., & Tanguy, P. A. Simulation of roll coating process using FEMLAB [Communication écrite]. FEMLAB Conference 2005, Boston, USA. Non disponible
Arzate, A., & Tanguy, P. A. (2005). Wetting contact line modeling in high-speed jet coating. Nordic Pulp & Paper Research Journal, 20(2), 217-226. Lien externe
Arzate, A., & Tanguy, P. A. (2004). Air Entrainment on a Moving Continuous Web. Chemical Engineering Science, 59(17), 3527-3536. Lien externe
Foucault, S., Ascanio, G., & Tanguy, P. A. (2004). Coaxial Mixer Hydrodynamics With Newtonian and Non-Newtonian Fluids. Chemical Engineering & Technology, 27(3), 324-329. Lien externe
Arzate, A., Reglat, O., & Tanguy, P. A. (2004). Determination of in-line process viscosity using static mixers. Flow Measurement and Instrumentation, 15(2), 77-85. Lien externe
Arzate, A., Ascanio, G., Carreau, P., & Tanguy, P. A. (2004). Extensional viscosity of coating colors and its relation with jet coating performance. Applied Rheology, 14(5), 240-250. Disponible
Devals, C., Heniche, M., Bertrand, F., Tanguy, P. A., & Hayes, R. E. (janvier 2004). A filtering technique for solving the advection equation in two-phase flow problems [Communication écrite]. CFD 2004, Ottawa, Canada. Non disponible
Devals, C., Heniche, M., Bertrand, F., Tanguy, P. A., & Hayes, R. E. (juin 2004). A Finite Element Solver for the Advection Equation Applied to Interface Tracking [Communication écrite]. 8th International Conference on Numerical Methods in Industrial Forming Processes, Columbus, Ohio. Lien externe
Ascanio, G., Carreau, P., Brito-de la Fuente, E., & Tanguy, P. A. (2004). Forward deformable roll coating at high speed with Newtonian fluids. Chemical Engineering Research & Design, 82(3), 390-397. Lien externe
Mmbaga, J. P., Hayes, R. E., Bertrand, F., & Tanguy, P. A. (janvier 2004). Modelling high speed forward deformable roll coating [Communication écrite]. 54th CSChE annual meeting, Calgary, Canada. Non disponible
Mmbaga, J. P., Hayes, R. E., Bertrand, F., & Tanguy, P. A. (janvier 2004). Numerical simulation of high speed roll coating with deformable rolls [Communication écrite]. 12th coating sci. and tech. symp., New York, USA. Non disponible
Mmbaga, J., Hayes, R. E., Bertrand, F., & Tanguy, P. A. (2004). Simulation of hydrodynamics in a forward roll coater. (Rapport technique n° Report 847). Non disponible
Ascanio, G., Foucault, S., & Tanguy, P. A. (2004). Time-Periodic Mixing of Shear-Thinning Fluids. Chemical Engineering Research & Design, 82(A9), 1199-1203. Lien externe
Rivera Aparicio, C. A., Heniche, M., Ascanio, G., & Tanguy, P. A. (2004). A virtual finite element model for centered and eccentric mixer configurations. Computers & Chemical Engineering, 28(12), 2459-2468. Lien externe
Bertrand, F., Thibault, F., Delamare, L., & Tanguy, P. A. (2003). Adaptive finite element simulations of fluid flow in twin-screw extruders. Computers & Chemical Engineering, 27(4), 491-500. Lien externe
Heniche, M., Reiden, M. F., & Tanguy, P. A. (2003). CFD analysis of laminar flow through KMX static mixers. NLGI Spokesman, 67, 10-18. Non disponible
Arzate, A., Ascanio, G., Carreau, P. J., & Tanguy, P. A. (novembre 2003). Extensional Properties of Coating Colors at High Strain Rates [Communication écrite]. ASME International Mechanical Engineering Congress and Exposition (IMECE 2003), Washington, DC, USA. Lien externe
Arzate, A., Ascanio, G., Carreau, P., & Tanguy, P. A. (octobre 2003). Extensional rheology of paper coating colors at high strain rate [Communication écrite]. 75th annual meeting of the Society of Rheology, Pittsburgh, Pennsylvania, USA. Non disponible
Ascanio, G., Foucault, S., & Tanguy, P. A. (juillet 2003). New Chaotic Approach for Mixing Shear-Thinning Fluids in Stirred Tanks [Communication écrite]. 4th ASME/JSME Joint Fluids Summer Engineering Conference (FEDSM 2003), Honolulu, Hawaii, USA. Lien externe
Ascanio, G., Foucault, S., & Tanguy, P. A. (2003). Performance of a New Mixed Down Pumping Impeller. Chemical Engineering & Technology, 26(8), 908-911. Lien externe
Bertrand, F., Giguere, R., & Tanguy, P. A. (juin 2003). Recent Progress on the Modeling of Complex Flows in Twin-Screw Extrusion [Communication écrite]. Computational Fluid and Solid Mechanics 2003, Vols 1 and 2, Cambridge, MA. Lien externe
Mmbaga, J. P., Hayes, R. E., Huijben, C. A., Bertrand, F., & Tanguy, P. A. (janvier 2003). Simulation and analysis of metered size press coating flow [Communication écrite]. 53th CSChE Annual Conference, Hamilton, ON, Canada. Non disponible
Alonso, S., Bertrand, F., & Tanguy, P. A. (2003). A Torque-Based Analysis of the Reverse Roll Coating Process. Chemical Engineering Science, 58(9), 1831-1837. Lien externe
Brocart, B., Tanguy, P. A., Magnin, C., & Bousquet, J. (2002). Design of in-Line Emulsification Processes for Water-in-Oil Emulsions. Journal of Dispersion Science and Technology, 23(1-3), 45-53. Lien externe
Giguère, R., Tanguy, P. A., & Bertrand, F. (janvier 2002). Adaptive 3D finite element simulations of fluid flow in twin-screw extruders [Communication écrite]. 52nd CSChE Annual Conference, Vancouver, BC, Canada. Non disponible
Arzate, A., Bertrand, F., Réglat, O., & Tanguy, P. A. (2002). Apparatus and method for measuring the rheological properties of a power law fluid. (Brevet no US6412337). Lien externe
Espinosa-Solares, T., Brito-De La Fuente, E., Tecante, A., & Tanguy, P. A. (2002). Gas Dispersion in Rheologically-Evolving Model Fluids by Hybrid Dual Mixing Systems. Chemical Engineering & Technology, 25(7), 723-727. Lien externe
Bertrand, F., & Tanguy, P. A. (2002). Krylov-Based Uzawa Algorithms for the Solution of the Stokes Equations Using Discontinuous-Pressure Tetrahedral Finite Elements. Journal of Computational Physics, 181(2), 617-638. Lien externe
Ascanio, G., Brito-Bazán, M., Brito-De La Fuente, E., Carreau, P. J., & Tanguy, P. A. (juillet 2002). Mixing Enhancement of Non-Newtonian Fluids Using Unconventional Configurations [Communication écrite]. ASME Joint U.S.-European Fluids Engineering Division Conference, Montreal, Quebec, Canada. Lien externe
Brito-De La Fuente, E., Bertrand, F., Carreau, P., & Tanguy, P. A. (2002). Mixing of viscoelastic fluids: A new strategy to elucidate the influence of elasticity on power consumption. Dans Engineering and Food for the 21st Century (p. 347-359). Lien externe
Espinosa-Solares, T., Brito-De La Fuente, E., Tecante, A., Medina-Torres, L., & Tanguy, P. A. (2002). Mixing Time in Rheologically Evolving Model Fluids by Hybrid Dual Mixing Systems. Chemical Engineering Research & Design, 80(8), 817-823. Lien externe
Ascanio, G., Carreau, P., Brito, E., & Tanguy, P. A. (2002). Orifice flowmeter for measuring extensional rheological properties. Canadian Journal of Chemical Engineering, 80(6), 1189-1196. Lien externe
Tanguy, P. A., & Thibault, F. (2002). Power Consumption in the Turbulent Regime for a Coaxial Mixer. Canadian Journal of Chemical Engineering, 80(4), 601-603. Lien externe
Thibault, F., & Tanguy, P. A. (2002). Power-Draw Analysis of a Coaxial Mixer With Newtonian and Non-Newtonian Fluids in the Laminar Regime. Chemical Engineering Science, 57(18), 3861-3872. Lien externe
Curran, S. J., Hayes, R. E., Afacan, A., Williams, M. C., & Tanguy, P. A. (2002). Properties of Carbopol Solutions as Models for Yield-Stress Fluids. Journal of Food Science, 67(1), 176-180. Lien externe
Tanguy, P. A., Bertrand, F., & Ritz, J.-B. (juin 2002). Shear-induced particle migration in mixing vessels [Communication écrite]. 18th PPS Annual Conference (PPS18), Guimarães, Portugal. Non disponible
Tanguy, P. A., Brocart, B., Bertrand, F., & Busquet, J. (septembre 2002). A simulation approach of emulsification [Communication écrite]. 3rd world Congress on Emulsions, Lyon, France. Non disponible
Réglat, O., & Tanguy, P. A. (2002). System and method for determining the process viscosity of a fluid in a film metering device. (Brevet no US6343501). Lien externe
Ascanio, G., Brito-Bazan, M., Brito-De La Fuente, E., Carreau, P., & Tanguy, P. A. (2002). Unconventional Configuration Studies to Improve Mixing Times in Stirred Tanks. Canadian Journal of Chemical Engineering, 80(4), 558-565. Lien externe
Alonso, S., Bertrand, F., & Tanguy, P. A. (2001). A CFD assessment of film coating process viscosity models. Canadian Journal of Chemical Engineering, 79(5), 751-759. Lien externe
Li, J., Tanguy, P. A., Carreau, P., & Moan, M. (2001). Effect of Thickener Structure on Paper-Coating Color Properties. Colloid and Polymer Science, 279(9), 865-871. Lien externe
Espinosa-Solares, T., Brito-De La Fuente, E., Tecante, A., & Tanguy, P. A. (2001). Flow Patterns in Rheologically Evolving Model Fluids Produced by Hybrid Dual Mixing Systems. Chemical Engineering & Technology, 24(9), 913-918. Lien externe
Alonso, S., & Tanguy, P. A. (2001). Hydrodynamic Instabilities in the Metering Nip of a Film Coater. Tappi Journal, 84(5), 67-67. Lien externe
Bertrand, F., Tanguy, P. A., & Thibault, F. (juillet 2001). A local refinement based fictitious domain method for the simulation of 3D fluid flow problems in complex geometries [Communication écrite]. 2001 SIAM Annual Meeting, San Diego, CA, USA. Non disponible
Furling, O., Tanguy, P. A., Henric, P., Denoel, D., & Choplin, L. (2001). New Dispersing Turbines for the Preparation of Concentrated Suspensions. Journal of Chemical Engineering of Japan, 34(5), 634-639. Lien externe
Bertrand, F., Tanguy, P. A., Feugnet, F., & Delamare, L. (janvier 2001). A numerical model for the transport of powders in a continuous polymerization reactor [Communication écrite]. 2001 AIChE Annual Meeting, Reno, CA, USA. Non disponible
Furling, O., Choplin, L., & Tanguy, P. A. (2001). On-line (in situ) viscosity follow-up of concentrated slurries during makedown. Chemical Engineering Research & Design, 79(8), 915-920. Lien externe
Tanguy, P. A., Bertrand, F., Thibault, F., & Galy-Jammou, P. (2001). Polymer melt mixing: modelling in 3D. Dans Encyclopedia of materials: science and technology (p. 7425-7428). Lien externe
Alonso, S., Reglat, O., Bertrand, F., Choplin, L., & Tanguy, P. A. (2001). Process Viscosity in Reverse Roll Coating. Chemical Engineering Research & Design, 79(2), 128-136. Lien externe
Mmbaga, J. P., Hayes, R. E., Bertrand, F., & Tanguy, P. A. (janvier 2001). Simulation of a metering size press for forward roll coating [Communication écrite]. 2001 AIChE Annual Meeting, Reno, CA, USA. Non disponible
Bertrand, F., Ritz, J.-B., Tanguy, P. A., & Giraud, E. (janvier 2001). Simulation of shear-induced particule migration in stirred tanks [Communication écrite]. Trends in numerical and physical modeling for industrial multiphase flows, Cargese, France. Non disponible
Bertrand, F., Tanguy, P. A., Thibault, F., & Delamare, L. (juin 2001). A strategy for the simulation of fluid flow in twin-screw extruders [Communication écrite]. 18th Biennial Conference on Mixing (Mixing XVIII), Pocono Manor, Pennsylvania, USA. Non disponible
Della Valle, D., Tanguy, P. A., & Carreau, P. (2000). Characterization of the Extensional Properties of Complex Fluids Using an Orifice Flowmeter. Journal of Non-Newtonian Fluid Mechanics, 94(1), 1-13. Lien externe
Rauline, D., Le Blévec, J. M., Bousquet, J., & Tanguy, P. A. (2000). A Comparative Assessment of the Performance of the Kenics and Smx Static Mixers. Chemical Engineering Research & Design, 78(3), 389-396. Lien externe
Curran, S. J., Hayes, R. E., Afacan, A., Williams, M. C., & Tanguy, P. A. (2000). Experimental Mixing Study of a Yield Stress Fluid in a Laminar Stirred Tank. Industrial & Engineering Chemistry Research, 39(1), 195-202. Lien externe
Thibault, F., Bertrand, F., Tanguy, P. A., & Delamare, L. (janvier 2000). Local refinement based fictitious domain method: application to the simulation of fluid flow in a twin-screw extruder [Communication écrite]. CFD, Montréal, Québec. Non disponible
Hayes, R. E., Bertrand, F., & Tanguy, P. A. (2000). Modelling of Fluid/Paper Interaction in the Application Nip of a Film Coater. Transport in Porous Media, 40(1), 55-72. Lien externe
Zhou, G., Tanguy, P. A., & Dubois, C. (2000). Power Consumption in a Double Planetary Mixer With Non- Newtonian and Viscoelastic Materials. Chemical Engineering Research & Design, 78(3), 445-453. Lien externe
Alonso, S., Reglat, O., Bertrand, F., & Tanguy, P. A. (2000). Process Viscosity in a Film Coater. Paperi Ja Puu-Paper and Timber, 82(1), 34-40. Non disponible
Ritz, J.-B., Bertrand, F., Thibault, F., & Tanguy, P. A. (2000). Shear-Induced Particle Migration in a Short-Dwell Coater. Chemical Engineering Science, 55(21), 4857-4867. Lien externe
Mmbaga, J., Hayes, R. E., Bertrand, F., & Tanguy, P. A. (janvier 2000). Simulation of dewatering and immobilization during paper coating [Communication écrite]. 50th CSChE Annual Conference, Montréal, Qc, Canada. Non disponible
Thibault, F., Bertrand, F., & Tanguy, P. A. (janvier 2000). Simulation of fluid flow in twin-screw extruders [Communication écrite]. 50th CSChE Annual Conference, Montréal, Qc, Canada. Non disponible
Elvidge, D. R., Réglat, O., Smith, M. K., & Tanguy, P. A. (1999). Coater head. (Brevet no US5902401). Lien externe
Fourcade, E., Bertrand, F., Reglat, O., & Tanguy, P. A. (1999). Finite Element Analysis of Fluid-Solid Interaction in the Metering Nip of a Metering Size Press. Computer Methods in Applied Mechanics and Engineering, 174(1-2), 235-245. Lien externe
Tanguy, P. A., Thibault, F., Dubois, C., & Aït-Kadi, A. (1999). Mixing Hydrodynamics in a Double Planetary Mixer. Chemical Engineering Research & Design, 77(4), 318-324. Lien externe
Yziquel, F., Carreau, P., & Tanguy, P. A. (1999). Non-Linear Viscoelastic Behavior of Fumed Silica Suspensions. Rheologica Acta, 38(1), 14-25. Lien externe
Tanguy, P. A., & La Fuente, E. B.-D. (1999). Non-Newtonian mixing with helical ribbon impellers and planetary mixers. Rheology Series, 8, 301-359. Lien externe
Yziquel, F., Moan, M., Carreau, P., & Tanguy, P. A. (1999). Nonlinear Viscoelastic Behavior of Paper Coating Colors. Nordic Pulp & Paper Research Journal, 14(1), 37-47. Lien externe
Bertrand, F., Tanguy, P. A., De La Fuente, E. B., & Carreau, P. (1999). Numerical Modeling of the Mixing Flow of Second-Order Fluids With Helical Ribbon Impellers. Computer Methods in Applied Mechanics and Engineering, 180(3-4), 267-280. Lien externe
Tanguy, P. A., Alonso, S., Réglat, O., & Bertrand, F. (janvier 1999). Process viscosity in a film coater [Communication écrite]. International symposium on paper coating coverage, Helsinki, Finland. Non disponible
Yziquel, F., Carreau, P., Moan, M., & Tanguy, P. A. (1999). Rheological Modeling of Concentrated Colloidal Suspensions. Journal of Non-Newtonian Fluid Mechanics, 86(1-2), 133-155. Lien externe
Tanguy, P. A., Bertrand, F., Thibault, F., & Galy-Jammou, P. (septembre 1999). Simulation of kneading mechanisms in a three-blade planetary mixer [Communication écrite]. 3rd International Symposium on Mixing in Industrial Processes, Osaka, Japan. Non disponible
Tanguy, P. A., & Nienow, A. W. (1998). Ingénierie du mélange: État actuel de la recherche préambule. Canadian Journal of Chemical Engineering, 76(3), 338-338. Lien externe
Fradette, L., Li, H. Z., Choplin, L., & Tanguy, P. A. (1998). 3D Finite Element Simulation of Fluid Flow Through a Smx Static Mixer. Computers & Chemical Engineering, 22, S759-S761. Lien externe
Dubois, C., Ait-Kadi, A., & Tanguy, P. A. (1998). Chemorheology of Polyurethane Systems as Predicted From Monte Carlo Simulations of Their Evolutive Molecular Weight Distribution. Journal of Rheology, 42(3), 435-452. Lien externe
Fourcade, E., Bertrand, F., & Tanguy, P. A. (janvier 1998). Effect of coating rheology in the metering nip of a film coater [Communication écrite]. 1998 CPPA Annual Meeting, Montréal, Qc, Canada. Non disponible
Tanguy, P. A., Bertrand, F., Brito de la Fuente, E., & Carreau, P. (novembre 1998). The effect of elasticity on the mixing of boger fluids with helical ribbons [Communication écrite]. 1998 AIChE Annual Meeting, Miami, CA, USA. Non disponible
Tanguy, P. A., & Nienow, A. W. (1998). Engineering Research on Mixing: State of the Art Introductory Remarks. Canadian Journal of Chemical Engineering, 76(3), 337-337. Lien externe
Brito de la Fuente, E., Lopez, L. M., Medina, L., Ascanio, G., & Tanguy, P. A. (1998). Evaluation of viscous food properties using a helical ribbon impeller (chp. 4). Dans Functional properties of proteins and lipids (p. 52-64). Non disponible
Hayes, R. E., Afacan, A., Boulanger, B., & Tanguy, P. A. (1998). Experimental Study of Reactive Mixing in a Laminar Flow Batch Reactor. Chemical Engineering Research & Design, 76(1), 73-81. Lien externe
Tanguy, P. A., Bertrand, F., Thibault, F., Fages, F., Lamotte, M., Giraud, E., & Fages, M.-H. (1998). Mécanismes de malaxage bipale dans un malaxeur à mouvement planétaire: simulation numérique 3D et étude expérimentale par traçage fluorimétrique. Récents progrès en génie des procédés, 61, 43-48. Non disponible
Dubois, C., Tanguy, P. A., & Ait-Kadi, A. (1998). Modelling of Polyurethane Composites Mixing Cycles. Chemical Engineering Research & Design, 76(1), 9-15. Lien externe
de la Villéon, J., Bertrand, F., Tanguy, P. A., Labrie, R., Bousquet, J., & Lebouvier, D. (1998). Numerical investigation of mixing efficiency of helical ribbons. AICHE Journal, 44(4), 972-977. Lien externe
Rauline, D., Tanguy, P. A., Le Blévec, J.-M., & Bousquet, J. (1998). Numerical Investigation of the Performance of Several Static Mixers. Canadian Journal of Chemical Engineering, 76(3), 527-535. Lien externe
Ritz, J. B., Bertrand, F., Thibault, F., & Tanguy, P. A. (janvier 1999). Numerical modeling of shear-induced migration in a film coater [Communication écrite]. 20th annual CIAMS meeting, Québec. Non disponible
Fourcade, E., Bertrand, F., & Tanguy, P. A. (janvier 1998). Numerical modeling of the hydrodynamics in the metering nip of a film coater [Communication écrite]. CFD, Québec. Non disponible
Vidal, D., Bertrand, F., & Tanguy, P. A. (1998). Numerical Simulation of the Hydrodynamics in a Short-Dwell Coater. Chemical Engineering Science, 53(11), 1991-2003. Lien externe
Brito-De La Fuente, E., Nava, J. A., Lopez, L., Medina, L., Ascanio, G., & Tanguy, P. A. (1998). Process Viscometry of Complex Fluids and Suspensions With Helical Ribbon Agitators. Canadian Journal of Chemical Engineering, 76(4), 689-695. Lien externe
Reglat, O., & Tanguy, P. A. (1998). Rheological Investigations of CaCO₃ Slurries in the Metering Nip of Metering Size Press. Tappi Journal, 81(5), 195-205. Lien externe
Bertrand, F., & Tanguy, P. A. (juillet 1998). Three-dimensional time-dependent fictitious domain methods [Communication écrite]. 1998 SIAM Annual Meeting, Toronto, ON, Canada. Lien externe
Fradette, L., Fasol, C., Li, H. Z., Choplin, L., & Tanguy, P. A. (septembre 1997). Efficacité de dispersion gaz-liquide dans un mélangeur statique Sulzer SMX [Communication écrite]. 6e Congrès français de génie des procédés: Nouvelles frontières du génie des procédés, Paris, France. Publié dans Récents progrès en génie des procédés, 11(55). Non disponible
Tanguy, P. A., De La Villeon, J., Labrie, R., Bousquet, J., Lebouvier, D., & Bertrand, F. (mars 1997). Evaluation of macromixing in a mechanically agitated vessel using chaos analysis [Communication écrite]. 9th European Conference on Mixing, Marne la Vallée, France. Publié dans Récents progrès en génie des procédés, 11(51). Non disponible
Reglat, O., & Tanguy, P. A. (1997). Experimental study of the flow in the metering nip of a metering-size press. AICHE Journal, 43(11), 2911-2920. Lien externe
Feigl, K., Bertrand, F., & Tanguy, P. A. (juillet 1997). Finite element calculation of 3D viscoelastic flows [Communication écrite]. 1997 SIAM Annual Meeting, Stanford, CA, USA. Non disponible
Bertrand, F., & Tanguy, P. A. (juillet 1997). Industrial mixing applications of a 3D fictitious domain method [Communication écrite]. 1997 SIAM Annual Meeting, Stanford, CA, USA. Non disponible
Brito De La Fuente, E., Espinosa, T., Tecante, A., Thibault, F., & Tanguy, P. A. (mars 1997). Mixing non-newtonian fluids under gassed and non-gassed conditions with a double geometry impeller [Communication écrite]. 9th European Conference on Mixing, Marne la Vallée, France. Publié dans Récents progrès en génie des procédés, 11(51). Non disponible
Tanguy, P. A., Thibault, F., Brito-De La Fuente, E., Espinosa-Solares, T., & Tecante, A. (1997). Mixing performance induced by coaxial flat blade-helical ribbon impellers rotating at different speeds. Chemical Engineering Science, 52(11), 1733-1741. Lien externe
Brito-De La Fuente, E., Choplin, L., & Tanguy, P. A. (1997). Mixing with helical ribbon impellers: Effect of highly shear thinning behaviour and impeller geometry. Chemical Engineering Research & Design, 75(1), 45-52. Lien externe
Duquesnoy, J.-A., Tanguy, P. A., Thibault, F., & Leuliet, J.-C. (1997). New pigment disperser for high solids paper coating colors. Chemical Engineering & Technology, 20(6), 424-428. Lien externe
Della Valle, D., Tanguy, P. A., Carreau, P., & Lavoie, P. A. (octobre 1997). A new rheometer for the extensional properties of viscoelastic liquids [Communication écrite]. 32e Colloque Annuel du Groupe Français de Rhéologie, Nantes, France. Publié dans Cahiers de rhéologie, 15(4). Non disponible
Brito-De La Fuente, E., Nuñez, M. C., & Tanguy, P. A. (1997). Non-isothermal mixing of rheologically complex fluids with close-clearance impellers : Effect of natural convection. Chemical Engineering & Technology, 20(3), 203-207. Lien externe
Davoust, L., Moreau, R., Cowley, M. D., Tanguy, P. A., & Bertrand, F. (octobre 1996). Numerical and analytical modelling of the MHD buoyancy-driven flow in a bridgman crystal growth configuration [Communication écrite]. 2nd International Workshop on Modelling in Crystal Growth, Durbuy, Belgium. Publié dans Journal of Crystal Growth, 180(3-4). Lien externe
Poulin, N., Tanguy, P. A., Aspler, J., & Larrondo, L. (1997). Numerical and physical modeling of the permeability of paper to CMC and coating liquids. Canadian Journal of Chemical Engineering, 75(5), 949-955. Lien externe
Espinosa-Solares, T., Brito De La Fuente, E., Tecante, A., & Tanguy, P. A. (1997). Power consumption of a dual turbine-helical ribbon impeller mixer in ungassed conditions. Chemical Engineering Journal, 67(3), 215-219. Lien externe
Espinosa-Solares, T., Brito De La Fuente, E., Thibault, F., & Tanguy, P. A. (1997). Power consumption with anchor mixers - effect of bottom clearance. Chemical Engineering Communications, 157(1), 65-71. Lien externe
Fourcade, E., Bertrand, F., Réglat, O., & Tanguy, P. A. (janvier 1997). Pressure modelling in a metering size press with a deformable roll cover [Communication écrite]. 1997 CPPA Annual Meeting, Montréal, Qc, Canada. Non disponible
Della Valle, D., Tanguy, P. A., Carreau, P., Lavoie, P. A., Parent, L., & Bertrand, F. (janvier 1997). A specific rheometer for extensional properties of coating colours [Communication écrite]. 1997 CPPA Annual Meeting, Montréal, Qc, Canada. Non disponible
Bertrand, F., Tanguy, P. A., & Thibault, F. (1997). Three-dimensional fictitious domain method for incompressible fluid flow problems. International Journal for Numerical Methods in Fluids, 25(6), 719-736. Lien externe
Tanguy, P. A., Bertrand, F., & Carreau, P. (octobre 1997). Three-dimensional modelling of boger fluid flows in helical ribbon mixers [Communication écrite]. 69th Annual Meeting of the Society of Rheology, Columbus, Ohio. USA. Lien externe
Bertrand, F., & Tanguy, P. A. (juillet 1997). Towards an efficient krylov-based uzawa algorithm for solving the Navier-Strokes equations [Communication écrite]. 1997 SIAM Annual Meeting, Stanford, CA, USA. Lien externe
Dubois, C., Thibault, F., Tanguy, P. A., & Ait-Kadi, A. Characterization of viscous mixing in a twin intermeshing conical helical mixer [Communication écrite]. Fluid mixing 5 conference. Non disponible
Hua, X., Tanguy, P. A., Li, R., & Vanwagner, J. S. (1996). Effect of basestock formation on paper coating. Tappi Journal, 79(5), 112-116. Lien externe
Hurez, P., Tanguy, P. A., & Blouin, D. (1996). A new design procedure for profile extrusion dies. Polymer Engineering and Science, 36(5), 626-635. Lien externe
Tanguy, P. A., Thibault, F., & Brito De la Fuente, E. (1996). A new investigation of the Metzner-Otto concept for anchor mixing impellers. Canadian Journal of Chemical Engineering, 74(2), 222-228. Lien externe
Bertrand, F., Tanguy, P. A., & Brito-De La Fuente, E. (1996). A new perspective for the mixing of yield stress fluids with anchor impellers. Journal of Chemical Engineering of Japan, 29(1), 51-58. Lien externe
Tanguy, P. A., Bertrand, F., Labrie, R., & Brito-De La Fuente, E. (1996). Numerical modelling of the mixing of viscoplastic slurries in a twin-blade planetary mixer. Chemical Engineering Research & Design, 74(4), 499-504. Non disponible
Mickaily-Huber, E. S., Bertrand, F., Tanguy, P. A., Meyer, T., Renken, A., Rys, F. S., & Wehrli, M. (1996). Numerical simulations of mixing in an SMRX static mixer. Chemical engineering journal and the biochemical engineering journal, 63(2), 117-126. Lien externe
Fradette, L., Tanguy, P. A., Hurez, P., & Blouin, D. (1996). On the determination of heat-transfer coefficient between pvc and steel in vacuum extrusion calibrators. International Journal of Numerical Methods for Heat & Fluid Flow, 6(1), 3-12. Lien externe
Bertrand, F., Vidal, D., & Tanguy, P. A. (janvier 1996). Optimization of a short-dwell time applicator by the finite element method [Communication écrite]. 1996 CPPA Annual Meeting, Montréal, Qc, Canada. Non disponible
Tecante, A., Choplin, L., Brito de la Fuente, E., & Tanguy, P. A. (1996). Oxygen transfer in non-newtonian fluids srirred with a helical ribbon impeller (chp. 15). Dans Multiphase reactor and polymerization system hydrodynamics (p. 431-453). Lien externe
Fourcade, E., Bertrand, F., Tanguy, P. A., & Esmail, N. (novembre 1996). Simulation of reverse roll coating with a deformable roll and shear-thinning fluids [Communication écrite]. 1996 AIChE Annual Meeting, Chicago, IL, USA. Non disponible
Bertrand, F., & Tanguy, P. A. (juillet 1995). A 3D domain imbedding finite element method for the resolution of moving boundary flow problems [Communication écrite]. 3rd International Congress on Industrial and Applied Mathematics (ICIAM 1995), Hamburg, Germany. Non disponible
Dubois, C., Desilets, S., Aitkadi, A., & Tanguy, P. A. (1995). Bulk-polymerization of hydroxyl terminated polybutadiene (htpb) with tolylene diisocyanate (tdi) - a kinetics study using c-13-nmr spectroscopy. Journal of Applied Polymer Science, 58(4), 827-834. Lien externe
Tanguy, P. A., Bertrand, F., Labrie, R., Brito de la Fuente, E., & Fages, M.-H. (1995). Étude numérique du malaxage de fluides chargés dans un malaxeur bipale à mouvement planétaire. Récents progrès en génie des procédés, 38, 87-93. Non disponible
Tanguy, P. A., Bertrand, F., Labrie, R., Brito-de-la-Fuente, E., & Fages, M. H. (septembre 1995). Étude numérique du malaxage de fluides chargés dans un malaxeur bipale à mouvement planétaire [Communication écrite]. 5e Congrès français de génie des procédés, Lyon, France. Non disponible
Yang, J., Tanguy, P. A., & Roy, C. (1995). Heat transfer, mass transfer and kinetics study of the vacuum pyrolysis of a large used tire particle. Chemical Engineering Science, 50(12), 1909-1922. Lien externe
Thibault, F., Tanguy, P. A., Blouin, D., & Hurez, P. (1995). Modelling of single-screw extruders with mixing pins: the case of pvc. Journal of vinyl and additive technology, 1(3), 127-136. Lien externe
Brito-de-la-Fuente, E., Espinosa, T., L'Heureux, M. J., Bertrand, F., & Tanguy, P. A. (novembre 1995). Non-isothermal mixing of rheologically complex fluids with close clearance impellers [Communication écrite]. 1995 AIChE Annual Meeting, Miami, CA, USA. Non disponible
Bertrand, F., Tanguy, P. A., Labrie, R., & Brito-de-la-Fuente, E. (janvier 1995). Numerical investigation of rheologically complex fluid flow in a twin-blade planetary mixer [Communication écrite]. 45th CSChE Annual Conference, Québec, Qc, Canada. Non disponible
Tanguy, P. A., Bertrand, F., Labrie, R., Brito, E., & Brito de la Fuente, E. (1995). Numerical study of fluid mixing in a two-blade mixer with planetary motion. Récents progrès en génie des procédés, 9(38), 87-91. Non disponible
Fradette, L., Tanguy, P. A., Thibault, F., Sheehy, P., Blouin, D., & Hurez, P. (1995). Optimal-design in profile extrusion calibration. Journal of Polymer Engineering, 14(4), 295-322. Lien externe
Mukhopadhyay, P., & Tanguy, P. A. (1995). Polymer waste management - an overview. International Plastics Engineering & Technology, 2, 55-62. Non disponible
Kabanemi, K. K., Abdellatif, A.-K., & Tanguy, P. A. (1995). Prediction of residual flow and thermoviscoelastic stresses in injection molding. Rheologica Acta, 34(1), 97-108. Lien externe
Davoust, L., Bertrand, F., Moreau, R., Tanguy, P. A., & Bolcato, R. (janvier 1995). Recent results on MHD damped convection in the horizontal bridgman configuration [Communication écrite]. 14th International Conference on Magnetohydrodynamics, Riga, Latvia. Lien externe
Thibault, F., Vidal, D., & Tanguy, P. A. (février 1995). Simulation of Flow Complexities in Paper Coating Make-Down and Application Processes [Présentation]. Dans 81st Annual Meeting TS CPPA, Montréal, Québec, Canada. Non disponible
Bertrand, F., Thibault, F., Tanguy, P. A., & Choplin, L. (janvier 1994). 3D modelling of the mixing of highly viscous polymers with intermeshing impellers [Communication écrite]. AIChE symposium series no. 299 - Process mixing - chemical and biochemical applications. Non disponible
Labrie, R., Thilloy, C., Tanguy, P. A., & Moll, G. H. (1994). Expert assistant to monitor finite element simulations. Mathematics and Computers in Simulation, 36(4-6), 413-422. Lien externe
Sheehy, P., Tanguy, P. A., & Blouin, D. (1994). Finite element model for complex profile calibration. Polymer Engineering and Science, 34(8), 650-656. Lien externe
Thibault, F., Bertrand, F., Tanguy, P. A., & Brito-de-la-Fuente, E. (novembre 1994). Further investigation of planetary mixing - influence of rheology and temperance [Communication écrite]. 1994 AIChE Annual Meeting, San Francisco, CA, USA. Non disponible
Tanguy, P. A., Bertrand, F., & Brito de la Fuente, E. (janvier 1994). Mixing of viscoplastic fluids with anchor impellers [Communication écrite]. 8th European Conference on Mixing, Cambridge. Non disponible
Bertrand, F., Tanguy, P. A., & Thibault, F. (juillet 1994). A new finite element method for viscous flow problems in enclosures containing moving parts [Communication écrite]. 1994 SIAM Annual Meeting, San Diego, CA, USA. Lien externe
Tanguy, P. A., Bertrand, F., Brito-de-la-Fuente, E., & Tecante, A. (novembre 1994). A novel multiple impeller for viscous mixing [Communication écrite]. 1994 AIChE Annual Meeting, San Francisco, CA, USA. Non disponible
Bertrand, F., Tanguy, P. A., & Thibault, F. (septembre 1994). Numerical study of the residence time distribution in static mixers [Communication écrite]. 8th European Conference on Mixing, Cambridge. Non disponible
Thibault, F., Tanguy, P. A., & Blouin, D. (1994). A numerical-model for single-screw extrusion with poly(vinyl chloride) (pvc) resins. Polymer Engineering and Science, 34(18), 1377-1386. Lien externe
Kabanemi, K. K., Bertrand, F., Tanguy, P. A., & Aitkadi, A. (1994). A pseudotransient finite-element method for the resolution of viscoelastic fluid-flow problems by the method of characteristics. Journal of Non-Newtonian Fluid Mechanics, 55(3), 283-305. Lien externe
Tanguy, P. A., Bertrand, F., Lacroix, R., Van Dijck, L., Meyer, T., & Renken, A. (juin 1993). Finite element flow simulations in an SMRX Statix Mixer [Communication écrite]. 14th biennial Conference on Mixing (Mixing XVIII), Santa Barbara, CA, USA. Non disponible
Tanguy, P. A., Thibault, F., Bertrand, F., & Choplin, L. (septembre 1993). Macromélange de fluides complexes en réacteur agité : expérimentation et modélisation par éléments finis 3D [Communication écrite]. 4e Congrès français de génie des procédés, Grenoble, France. Non disponible
Brito-de-la-Fuente, E., Carreau, P., Cheng, J., Bertrand, F., Tanguy, P. A., & Choplin, L. (juin 1993). Macromixing of rheologically complex fluids with helical impellers [Communication écrite]. 14th biennial Conference on Mixing (Mixing XVIII), Santa Barbara, CA, USA. Non disponible
Bertrand, F., Tanguy, P. A., & Pelletier, D. (juillet 1993). Towards an efficient iterative method for solving the Navier-Stokes equations using the 3D crouzeix-raviart element [Communication écrite]. 1993 SIAM Annual Meeting, Philadelphia, PA, USA. Lien externe
Kabanemi, K. K., Bertrand, F., Tanguy, P. A., & Aït Kadi, A. (janvier 1993). A transient finite element method for the resolution of viscoelastic fluid flow problems by the method of characteristics [Communication écrite]. 8th International Workshop on Numerical Methods in Non-Newtonian Flows, Cape Code, MA, USA. Non disponible
Tanguy, P. A., Choplin, L., Lacroix, R., Bertrand, F., Brito-de-la-Fuente, E., & Leuliet, J. C. (septembre 1991). Agitation de fluides visqueux rhéologiquement complexes avec des agitateurs de proximité [Communication écrite]. 3e Congrès français de génie des procédés, Compiègne, France. Non disponible
Bertrand, F., Hayes, R. E., & Tanguy, P. A. (1991). A decomposed Crouzeix-Raviart element for the finite element solution of the Navier-Stokes equation. International Journal for Numerical Methods in Fluids, 13(9), 1073-1083. Lien externe
Tanguy, P. A., & Bertrand, F. (novembre 1991). Finite element computations on a network using NCSᵗᵐ [Communication écrite]. 1991 AIChE Annual Meeting, Chicago, IL, USA. Non disponible
Tanguy, P. A., Lacroix, R., Bertrand, F., Choplin, L., & Brito-de-la-Fuente, E. (septembre 1991). Mixing of rheologically complex fluids with an helical ribbon screw impeller : experimental and 3D results [Communication écrite]. 7th European Conference on Mixing, Bruges, Belgium. Non disponible
Tanguy, P. A., & Bertrand, F. (juin 1990). Finite element computations on a network using NCSᵗᵐ [Communication écrite]. 4th Canadian Supercomputing Symposium, Montréal, Qc, Canada. Non disponible
Lacroix, R., Bertrand, F., Tanguy, P. A., Choplin, L., & Brito-de-la-Fuente, E. (janvier 1990). Modelling of mixing with an helical ribbon screw impeller [Communication écrite]. 3rd European Rheology Conference, Edinburgh, UK. Non disponible
Tanguy, P. A., Lacroix, R., & Bertrand, F. (juin 1990). Modelling of the injection molding process [Communication écrite]. 4th Canadian Supercomputing Symposium, Montréal, Québec. Non disponible
Lacroix, R., Bertrand, F., Tanguy, P. A., Brito-de-la-Fuente, E., & Choplin, L. (août 1989). 3D modelling of mixing with an HRS impeller [Communication écrite]. 12th Engineering Foundation Conference (MIXING XII), Potossi, MI, USA. Non disponible
Lacroix, R., Tanguy, P. A., Bertrand, F., Choplin, L., & Brito-de-la-Fuente, E. (octobre 1989). 3D modelling of mixing with an HRS impeller [Communication écrite]. 61st Annual Meeting of the Society of Rheology, Montréal, Qc, Canada. Non disponible
Tanguy, P. A., Lacroix, R., & Bertrand, F. (avril 1989). Flow through mixers : a new field of applications for the finite element method [Communication écrite]. 5th Annual Meeting of the Polymer Processing Society, Kyoto, Japan. Non disponible
Lacroix, R., Bertrand, F., Tanguy, P. A., Choplin, L., & Brito-de-la-Fuente, E. (septembre 1989). Modélisation tridimensionnelle de l'agitation dans un réacteur muni d'une turbine HRS [Communication écrite]. 2e Congrès français de génie des procédés, Toulouse, France. Non disponible
Tanguy, P. A., Lacroix, R., & Bertrand, F. (1989). Modelling complex fluid flow with finite elements. Cray Channels, 10(3). Lien externe
Pelletier, D., Garon, A., Fortin, A., Bertrand, F., & Tanguy, P. A. (juillet 1989). Natural finite elements for 3D incompressible viscous flow [Communication écrite]. 6th International Conference on Numerical Methods in Laminar and Turbulent Flow, Swansea, UK. Non disponible
Tanguy, P. A., Fortin, A., & Bertrand, F. (1988). A 3-D finite eiement model for polymer melt flow. Advances in Polymer Technology, 8(2), 99-113. Lien externe
Tanguy, P. A., Bertrand, F., & Gadbois, M. (mai 1988). A 3D finite element method solution of polymeric fluid flow through dies [Communication écrite]. 4th Annual Meeting of the Polymer Processing Society, Orlando, FL, USA. Non disponible
Tanguy, P. A., Bertrand, F., Gadbois, M., & Robichaud, M. P. (octobre 1988). Advanced finite element software for polymer processing [Communication écrite]. 4th International Symposium on Science and Engineering on Cray Computers, Minneapolis, Minnesota, USA. Non disponible
Tanguy, P. A., Lacroix, R., & Bertrand, F. (1988). De la recherche aux applications industrielles : ingénierie assistée par ordinateur. Le Québec industriel. Non disponible
Tanguy, P. A., Bertrand, F., Gadbois, M., & Fortin, A. (août 1988). A finite element model for the advective heat transfer [Communication écrite]. 17th International Congress on Theory and Applied Mechanics, Grenoble, France. Non disponible
Bertrand, F., & Tanguy, P. A. (1988). Graphical representation of two-dimensional fluid flow by stream vectors. Communications in Applied Numerical Methods, 4(2), 213-218. Lien externe
Tanguy, P. A., Lacroix, R., & Bertrand, F. (1988). Un super ordinateur au Québec? Notre avenir en dépend. Le Québec industriel. Non disponible
Tanguy, P. A., & Fortin, A. (1986). A finite element simulation of polymer melt flows. Advances in Polymer Technology, 6(4), 501-508. Lien externe
